linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Applied "regulator: da9210: Convert to use regulator_set/get_current_limit_regmap" to the regulator tree
@ 2019-03-04  0:06 Mark Brown
  0 siblings, 0 replies; only message in thread
From: Mark Brown @ 2019-03-04  0:06 UTC (permalink / raw)
  To: Axel Lin; +Cc: Steve Twiss, Mark Brown, linux-kernel

The patch

   regulator: da9210: Convert to use regulator_set/get_current_limit_regmap

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 8b3216c40136a3d6594edeec56e6ef1910709432 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Thu, 28 Feb 2019 21:40:15 +0800
Subject: [PATCH] regulator: da9210: Convert to use
 regulator_set/get_current_limit_regmap

Use regulator_set/get_current_limit_regmap helpers to save some code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/da9210-regulator.c | 53 ++++------------------------
 1 file changed, 7 insertions(+), 46 deletions(-)

diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index 84dba64ed11e..528303771723 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -41,10 +41,6 @@ static const struct regmap_config da9210_regmap_config = {
 	.val_bits = 8,
 };
 
-static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA,
-				    int max_uA);
-static int da9210_get_current_limit(struct regulator_dev *rdev);
-
 static const struct regulator_ops da9210_buck_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -52,8 +48,8 @@ static const struct regulator_ops da9210_buck_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.list_voltage = regulator_list_voltage_linear,
-	.set_current_limit = da9210_set_current_limit,
-	.get_current_limit = da9210_get_current_limit,
+	.set_current_limit = regulator_set_current_limit_regmap,
+	.get_current_limit = regulator_get_current_limit_regmap,
 };
 
 /* Default limits measured in millivolts and milliamps */
@@ -62,7 +58,7 @@ static const struct regulator_ops da9210_buck_ops = {
 #define DA9210_STEP_MV		10
 
 /* Current limits for buck (uA) indices corresponds with register values */
-static const int da9210_buck_limits[] = {
+static const unsigned int da9210_buck_limits[] = {
 	1600000, 1800000, 2000000, 2200000, 2400000, 2600000, 2800000, 3000000,
 	3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000, 4600000
 };
@@ -80,47 +76,12 @@ static const struct regulator_desc da9210_reg = {
 	.enable_reg = DA9210_REG_BUCK_CONT,
 	.enable_mask = DA9210_BUCK_EN,
 	.owner = THIS_MODULE,
+	.curr_table = da9210_buck_limits,
+	.n_current_limits = ARRAY_SIZE(da9210_buck_limits),
+	.csel_reg = DA9210_REG_BUCK_ILIM,
+	.csel_mask = DA9210_BUCK_ILIM_MASK,
 };
 
-static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA,
-				    int max_uA)
-{
-	struct da9210 *chip = rdev_get_drvdata(rdev);
-	unsigned int sel;
-	int i;
-
-	/* search for closest to maximum */
-	for (i = ARRAY_SIZE(da9210_buck_limits)-1; i >= 0; i--) {
-		if (min_uA <= da9210_buck_limits[i] &&
-		    max_uA >= da9210_buck_limits[i]) {
-			sel = i;
-			sel = sel << DA9210_BUCK_ILIM_SHIFT;
-			return regmap_update_bits(chip->regmap,
-						  DA9210_REG_BUCK_ILIM,
-						  DA9210_BUCK_ILIM_MASK, sel);
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int da9210_get_current_limit(struct regulator_dev *rdev)
-{
-	struct da9210 *chip = rdev_get_drvdata(rdev);
-	unsigned int data;
-	unsigned int sel;
-	int ret;
-
-	ret = regmap_read(chip->regmap, DA9210_REG_BUCK_ILIM, &data);
-	if (ret < 0)
-		return ret;
-
-	/* select one of 16 values: 0000 (1600mA) to 1111 (4600mA) */
-	sel = (data & DA9210_BUCK_ILIM_MASK) >> DA9210_BUCK_ILIM_SHIFT;
-
-	return da9210_buck_limits[sel];
-}
-
 static irqreturn_t da9210_irq_handler(int irq, void *data)
 {
 	struct da9210 *chip = data;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2019-03-04  0:07 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-04  0:06 Applied "regulator: da9210: Convert to use regulator_set/get_current_limit_regmap" to the regulator tree Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).