[PATCH AUTOSEL 4.19 01/48] clk: sunxi-ng: v3s: Fix TCON reset de-assert bit

[PATCH AUTOSEL 4.19 01/48] clk: sunxi-ng: v3s: Fix TCON reset de-assert bit

[Sasha Levin]

From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

[ Upstream commit 5c59801f7018acba11b12de59017a3fcdcf7421d ]

According to the datasheet and the reference code from Allwinner, the
bit used to de-assert the TCON reset is bit 4, not bit 3.

Fix it in the V3s CCU driver.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index 621b1cd996db..ac12f261f8ca 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -542,7 +542,7 @@ static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
 	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(29) },
 
 	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
-	[RST_BUS_TCON0]		=  { 0x2c4, BIT(3) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(4) },
 	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
 	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
 	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
-- 
2.19.1

[PATCH AUTOSEL 4.19 02/48] kallsyms: Handle too long symbols in kallsyms.c

[Sasha Levin]

From: Eugene Loh <eugene.loh@oracle.com>

[ Upstream commit 6db2983cd8064808141ccefd75218f5b4345ffae ]

When checking for symbols with excessively long names,
account for null terminating character.

Fixes: f3462aa952cf ("Kbuild: Handle longer symbols in kallsyms.c")
Signed-off-by: Eugene Loh <eugene.loh@oracle.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kallsyms.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index a9186a98a37d..0c9c54b57515 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -120,8 +120,8 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 			fprintf(stderr, "Read error or end of file.\n");
 		return -1;
 	}
-	if (strlen(sym) > KSYM_NAME_LEN) {
-		fprintf(stderr, "Symbol %s too long for kallsyms (%zu vs %d).\n"
+	if (strlen(sym) >= KSYM_NAME_LEN) {
+		fprintf(stderr, "Symbol %s too long for kallsyms (%zu >= %d).\n"
 				"Please increase KSYM_NAME_LEN both in kernel and kallsyms.c\n",
 			sym, strlen(sym), KSYM_NAME_LEN);
 		return -1;
-- 
2.19.1

[PATCH AUTOSEL 4.19 03/48] clk: sunxi: A31: Fix wrong AHB gate number

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit ee0b27a3a4da0b0ed2318aa092f8856896e9450b ]

According to the manual the gate clock for MMC3 is at bit 11, and NAND1
is controlled by bit 12.

Fix the gate bit definitions in the clock driver.

Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index 3b97f60540ad..609970c0b666 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -264,9 +264,9 @@ static SUNXI_CCU_GATE(ahb1_mmc1_clk,	"ahb1-mmc1",	"ahb1",
 static SUNXI_CCU_GATE(ahb1_mmc2_clk,	"ahb1-mmc2",	"ahb1",
 		      0x060, BIT(10), 0);
 static SUNXI_CCU_GATE(ahb1_mmc3_clk,	"ahb1-mmc3",	"ahb1",
-		      0x060, BIT(12), 0);
+		      0x060, BIT(11), 0);
 static SUNXI_CCU_GATE(ahb1_nand1_clk,	"ahb1-nand1",	"ahb1",
-		      0x060, BIT(13), 0);
+		      0x060, BIT(12), 0);
 static SUNXI_CCU_GATE(ahb1_nand0_clk,	"ahb1-nand0",	"ahb1",
 		      0x060, BIT(13), 0);
 static SUNXI_CCU_GATE(ahb1_sdram_clk,	"ahb1-sdram",	"ahb1",
-- 
2.19.1

[PATCH AUTOSEL 4.19 04/48] esp: Skip TX bytes accounting when sending from a request socket

[Sasha Levin]

From: Martin Willi <martin@strongswan.org>

[ Upstream commit 09db51241118aeb06e1c8cd393b45879ce099b36 ]

On ESP output, sk_wmem_alloc is incremented for the added padding if a
socket is associated to the skb. When replying with TCP SYNACKs over
IPsec, the associated sk is a casted request socket, only. Increasing
sk_wmem_alloc on a request socket results in a write at an arbitrary
struct offset. In the best case, this produces the following WARNING:

WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4]
refcount_t: addition on 0; use-after-free.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2
Hardware name: Marvell Armada 380/385 (Device Tree)
[...]
[<bf0ff354>] (esp_output_head [esp4]) from [<bf1006a4>] (esp_output+0xb8/0x180 [esp4])
[<bf1006a4>] (esp_output [esp4]) from [<c05dee64>] (xfrm_output_resume+0x558/0x664)
[<c05dee64>] (xfrm_output_resume) from [<c05d07b0>] (xfrm4_output+0x44/0xc4)
[<c05d07b0>] (xfrm4_output) from [<c05956bc>] (tcp_v4_send_synack+0xa8/0xe8)
[<c05956bc>] (tcp_v4_send_synack) from [<c0586ad8>] (tcp_conn_request+0x7f4/0x948)
[<c0586ad8>] (tcp_conn_request) from [<c058c404>] (tcp_rcv_state_process+0x2a0/0xe64)
[<c058c404>] (tcp_rcv_state_process) from [<c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4)
[<c05958ac>] (tcp_v4_do_rcv) from [<c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20)
[<c0598a4c>] (tcp_v4_rcv) from [<c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc)
[<c056eb74>] (ip_protocol_deliver_rcu) from [<c056ee6c>] (ip_local_deliver_finish+0x48/0x54)
[<c056ee6c>] (ip_local_deliver_finish) from [<c056eecc>] (ip_local_deliver+0x54/0xec)
[<c056eecc>] (ip_local_deliver) from [<c056efac>] (ip_rcv+0x48/0xb8)
[<c056efac>] (ip_rcv) from [<c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c)
[...]

The issue triggers only when not using TCP syncookies, as for syncookies
no socket is associated.

Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/esp4.c | 2 +-
 net/ipv6/esp6.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 97689012b357..12a43a5369a5 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -325,7 +325,7 @@ int esp_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *
 			skb->len += tailen;
 			skb->data_len += tailen;
 			skb->truesize += tailen;
-			if (sk)
+			if (sk && sk_fullsock(sk))
 				refcount_add(tailen, &sk->sk_wmem_alloc);
 
 			goto out;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 88a7579c23bd..a7d996148eed 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -293,7 +293,7 @@ int esp6_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info
 			skb->len += tailen;
 			skb->data_len += tailen;
 			skb->truesize += tailen;
-			if (sk)
+			if (sk && sk_fullsock(sk))
 				refcount_add(tailen, &sk->sk_wmem_alloc);
 
 			goto out;
-- 
2.19.1

[PATCH AUTOSEL 4.19 05/48] ARM: 8824/1: fix a migrating irq bug when hotplug cpu

[Sasha Levin]

From: Dietmar Eggemann <dietmar.eggemann@arm.com>

[ Upstream commit 1b5ba350784242eb1f899bcffd95d2c7cff61e84 ]

Arm TC2 fails cpu hotplug stress test.

This issue was tracked down to a missing copy of the new affinity
cpumask for the vexpress-spc interrupt into struct
irq_common_data.affinity when the interrupt is migrated in
migrate_one_irq().

Fix it by replacing the arm specific hotplug cpu migration with the
generic irq code.

This is the counterpart implementation to commit 217d453d473c ("arm64:
fix a migrating irq bug when hotplug cpu").

Tested with cpu hotplug stress test on Arm TC2 (multi_v7_defconfig plus
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y).
The vexpress-spc interrupt (irq=22) on this board is affine to CPU0.
Its affinity cpumask now changes correctly e.g. from 0 to 1-4 when
CPU0 is hotplugged out.

Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/Kconfig           |  1 +
 arch/arm/include/asm/irq.h |  1 -
 arch/arm/kernel/irq.c      | 62 --------------------------------------
 arch/arm/kernel/smp.c      |  2 +-
 4 files changed, 2 insertions(+), 64 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e8cd55a5b04c..cd4c74daf71e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1444,6 +1444,7 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
+	select GENERIC_IRQ_MIGRATION
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index c883fcbe93b6..46d41140df27 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -25,7 +25,6 @@
 #ifndef __ASSEMBLY__
 struct irqaction;
 struct pt_regs;
-extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 9908dacf9229..844861368cd5 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -31,7 +31,6 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/seq_file.h>
-#include <linux/ratelimit.h>
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/kallsyms.h>
@@ -109,64 +108,3 @@ int __init arch_probe_nr_irqs(void)
 	return nr_irqs;
 }
 #endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-static bool migrate_one_irq(struct irq_desc *desc)
-{
-	struct irq_data *d = irq_desc_get_irq_data(desc);
-	const struct cpumask *affinity = irq_data_get_affinity_mask(d);
-	struct irq_chip *c;
-	bool ret = false;
-
-	/*
-	 * If this is a per-CPU interrupt, or the affinity does not
-	 * include this CPU, then we have nothing to do.
-	 */
-	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
-		return false;
-
-	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
-		affinity = cpu_online_mask;
-		ret = true;
-	}
-
-	c = irq_data_get_irq_chip(d);
-	if (!c->irq_set_affinity)
-		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
-	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
-		cpumask_copy(irq_data_get_affinity_mask(d), affinity);
-
-	return ret;
-}
-
-/*
- * The current CPU has been marked offline.  Migrate IRQs off this CPU.
- * If the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- *
- * Note: we must iterate over all IRQs, whether they have an attached
- * action structure or not, as we need to get chained interrupts too.
- */
-void migrate_irqs(void)
-{
-	unsigned int i;
-	struct irq_desc *desc;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	for_each_irq_desc(i, desc) {
-		bool affinity_broken;
-
-		raw_spin_lock(&desc->lock);
-		affinity_broken = migrate_one_irq(desc);
-		raw_spin_unlock(&desc->lock);
-
-		if (affinity_broken)
-			pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
-				i, smp_processor_id());
-	}
-
-	local_irq_restore(flags);
-}
-#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 3bf82232b1be..1d6f5ea522f4 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -254,7 +254,7 @@ int __cpu_disable(void)
 	/*
 	 * OK - migrate IRQs away from this CPU
 	 */
-	migrate_irqs();
+	irq_migrate_all_off_this_cpu();
 
 	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
-- 
2.19.1

[PATCH AUTOSEL 4.19 06/48] bpf: only adjust gso_size on bytestream protocols

[Sasha Levin]

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit b90efd2258749e04e1b3f71ef0d716f2ac2337e0 ]

bpf_skb_change_proto and bpf_skb_adjust_room change skb header length.
For GSO packets they adjust gso_size to maintain the same MTU.

The gso size can only be safely adjusted on bytestream protocols.
Commit d02f51cbcf12 ("bpf: fix bpf_skb_adjust_net/bpf_skb_proto_xlat
to deal with gso sctp skbs") excluded SKB_GSO_SCTP.

Since then type SKB_GSO_UDP_L4 has been added, whose contents are one
gso_size unit per datagram. Also exclude these.

Move from a blacklist to a whitelist check to future proof against
additional such new GSO types, e.g., for fraglist based GRO.

Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skbuff.h |  6 ++++++
 net/core/filter.c      | 12 ++++--------
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index a404d475acee..3b0a25bb7c6f 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -4086,6 +4086,12 @@ static inline bool skb_is_gso_sctp(const struct sk_buff *skb)
 	return skb_shinfo(skb)->gso_type & SKB_GSO_SCTP;
 }
 
+static inline bool skb_is_gso_tcp(const struct sk_buff *skb)
+{
+	return skb_is_gso(skb) &&
+	       skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6);
+}
+
 static inline void skb_gso_reset(struct sk_buff *skb)
 {
 	skb_shinfo(skb)->gso_size = 0;
diff --git a/net/core/filter.c b/net/core/filter.c
index fb0080e84bd4..cb792b344b5e 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2614,8 +2614,7 @@ static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
 	u32 off = skb_mac_header_len(skb);
 	int ret;
 
-	/* SCTP uses GSO_BY_FRAGS, thus cannot adjust it. */
-	if (skb_is_gso(skb) && unlikely(skb_is_gso_sctp(skb)))
+	if (!skb_is_gso_tcp(skb))
 		return -ENOTSUPP;
 
 	ret = skb_cow(skb, len_diff);
@@ -2656,8 +2655,7 @@ static int bpf_skb_proto_6_to_4(struct sk_buff *skb)
 	u32 off = skb_mac_header_len(skb);
 	int ret;
 
-	/* SCTP uses GSO_BY_FRAGS, thus cannot adjust it. */
-	if (skb_is_gso(skb) && unlikely(skb_is_gso_sctp(skb)))
+	if (!skb_is_gso_tcp(skb))
 		return -ENOTSUPP;
 
 	ret = skb_unclone(skb, GFP_ATOMIC);
@@ -2782,8 +2780,7 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 len_diff)
 	u32 off = skb_mac_header_len(skb) + bpf_skb_net_base_len(skb);
 	int ret;
 
-	/* SCTP uses GSO_BY_FRAGS, thus cannot adjust it. */
-	if (skb_is_gso(skb) && unlikely(skb_is_gso_sctp(skb)))
+	if (!skb_is_gso_tcp(skb))
 		return -ENOTSUPP;
 
 	ret = skb_cow(skb, len_diff);
@@ -2812,8 +2809,7 @@ static int bpf_skb_net_shrink(struct sk_buff *skb, u32 len_diff)
 	u32 off = skb_mac_header_len(skb) + bpf_skb_net_base_len(skb);
 	int ret;
 
-	/* SCTP uses GSO_BY_FRAGS, thus cannot adjust it. */
-	if (skb_is_gso(skb) && unlikely(skb_is_gso_sctp(skb)))
+	if (!skb_is_gso_tcp(skb))
 		return -ENOTSUPP;
 
 	ret = skb_unclone(skb, GFP_ATOMIC);
-- 
2.19.1

[PATCH AUTOSEL 4.19 07/48] bpf: fix lockdep false positive in stackmap

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit 3defaf2f15b2bfd86c6664181ac009e91985f8ac ]

Lockdep warns about false positive:
[   11.211460] ------------[ cut here ]------------
[   11.211936] DEBUG_LOCKS_WARN_ON(depth <= 0)
[   11.211985] WARNING: CPU: 0 PID: 141 at ../kernel/locking/lockdep.c:3592 lock_release+0x1ad/0x280
[   11.213134] Modules linked in:
[   11.214954] RIP: 0010:lock_release+0x1ad/0x280
[   11.223508] Call Trace:
[   11.223705]  <IRQ>
[   11.223874]  ? __local_bh_enable+0x7a/0x80
[   11.224199]  up_read+0x1c/0xa0
[   11.224446]  do_up_read+0x12/0x20
[   11.224713]  irq_work_run_list+0x43/0x70
[   11.225030]  irq_work_run+0x26/0x50
[   11.225310]  smp_irq_work_interrupt+0x57/0x1f0
[   11.225662]  irq_work_interrupt+0xf/0x20

since rw_semaphore is released in a different task vs task that locked the sema.
It is expected behavior.
Fix the warning with up_read_non_owner() and rwsem_release() annotation.

Fixes: bae77c5eb5b2 ("bpf: enable stackmap with build_id in nmi context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/stackmap.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index 6a32933cae4f..7cb7a7f98a37 100644
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -44,7 +44,7 @@ static void do_up_read(struct irq_work *entry)
 	struct stack_map_irq_work *work;
 
 	work = container_of(entry, struct stack_map_irq_work, irq_work);
-	up_read(work->sem);
+	up_read_non_owner(work->sem);
 	work->sem = NULL;
 }
 
@@ -338,6 +338,12 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,
 	} else {
 		work->sem = &current->mm->mmap_sem;
 		irq_work_queue(&work->irq_work);
+		/*
+		 * The irq_work will release the mmap_sem with
+		 * up_read_non_owner(). The rwsem_release() is called
+		 * here to release the lock from lockdep's perspective.
+		 */
+		rwsem_release(&current->mm->mmap_sem.dep_map, 1, _RET_IP_);
 	}
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 08/48] af_key: unconditionally clone on broadcast

[Sasha Levin]

From: Sean Tranchetti <stranche@codeaurora.org>

[ Upstream commit fc2d5cfdcfe2ab76b263d91429caa22451123085 ]

Attempting to avoid cloning the skb when broadcasting by inflating
the refcount with sock_hold/sock_put while under RCU lock is dangerous
and violates RCU principles. It leads to subtle race conditions when
attempting to free the SKB, as we may reference sockets that have
already been freed by the stack.

Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c4b
[006b6b6b6b6b6c4b] address between user and kernel address ranges
Internal error: Oops: 96000004 [#1] PREEMPT SMP
task: fffffff78f65b380 task.stack: ffffff8049a88000
pc : sock_rfree+0x38/0x6c
lr : skb_release_head_state+0x6c/0xcc
Process repro (pid: 7117, stack limit = 0xffffff8049a88000)
Call trace:
	sock_rfree+0x38/0x6c
	skb_release_head_state+0x6c/0xcc
	skb_release_all+0x1c/0x38
	__kfree_skb+0x1c/0x30
	kfree_skb+0xd0/0xf4
	pfkey_broadcast+0x14c/0x18c
	pfkey_sendmsg+0x1d8/0x408
	sock_sendmsg+0x44/0x60
	___sys_sendmsg+0x1d0/0x2a8
	__sys_sendmsg+0x64/0xb4
	SyS_sendmsg+0x34/0x4c
	el0_svc_naked+0x34/0x38
Kernel panic - not syncing: Fatal exception

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/key/af_key.c | 40 +++++++++++++++-------------------------
 1 file changed, 15 insertions(+), 25 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index 9d61266526e7..7da629d59717 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -196,30 +196,22 @@ static int pfkey_release(struct socket *sock)
 	return 0;
 }
 
-static int pfkey_broadcast_one(struct sk_buff *skb, struct sk_buff **skb2,
-			       gfp_t allocation, struct sock *sk)
+static int pfkey_broadcast_one(struct sk_buff *skb, gfp_t allocation,
+			       struct sock *sk)
 {
 	int err = -ENOBUFS;
 
-	sock_hold(sk);
-	if (*skb2 == NULL) {
-		if (refcount_read(&skb->users) != 1) {
-			*skb2 = skb_clone(skb, allocation);
-		} else {
-			*skb2 = skb;
-			refcount_inc(&skb->users);
-		}
-	}
-	if (*skb2 != NULL) {
-		if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf) {
-			skb_set_owner_r(*skb2, sk);
-			skb_queue_tail(&sk->sk_receive_queue, *skb2);
-			sk->sk_data_ready(sk);
-			*skb2 = NULL;
-			err = 0;
-		}
+	if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf)
+		return err;
+
+	skb = skb_clone(skb, allocation);
+
+	if (skb) {
+		skb_set_owner_r(skb, sk);
+		skb_queue_tail(&sk->sk_receive_queue, skb);
+		sk->sk_data_ready(sk);
+		err = 0;
 	}
-	sock_put(sk);
 	return err;
 }
 
@@ -234,7 +226,6 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
 {
 	struct netns_pfkey *net_pfkey = net_generic(net, pfkey_net_id);
 	struct sock *sk;
-	struct sk_buff *skb2 = NULL;
 	int err = -ESRCH;
 
 	/* XXX Do we need something like netlink_overrun?  I think
@@ -253,7 +244,7 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
 		 * socket.
 		 */
 		if (pfk->promisc)
-			pfkey_broadcast_one(skb, &skb2, GFP_ATOMIC, sk);
+			pfkey_broadcast_one(skb, GFP_ATOMIC, sk);
 
 		/* the exact target will be processed later */
 		if (sk == one_sk)
@@ -268,7 +259,7 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
 				continue;
 		}
 
-		err2 = pfkey_broadcast_one(skb, &skb2, GFP_ATOMIC, sk);
+		err2 = pfkey_broadcast_one(skb, GFP_ATOMIC, sk);
 
 		/* Error is cleared after successful sending to at least one
 		 * registered KM */
@@ -278,9 +269,8 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation,
 	rcu_read_unlock();
 
 	if (one_sk != NULL)
-		err = pfkey_broadcast_one(skb, &skb2, allocation, one_sk);
+		err = pfkey_broadcast_one(skb, allocation, one_sk);
 
-	kfree_skb(skb2);
 	kfree_skb(skb);
 	return err;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 09/48] ARM: 8835/1: dma-mapping: Clear DMA ops on teardown

[Sasha Levin]

From: Robin Murphy <robin.murphy@arm.com>

[ Upstream commit fc67e6f120a388b611d94cc40baf99a5cc56b283 ]

Installing the appropriate non-IOMMU DMA ops in arm_iommu_detch_device()
serves the case where IOMMU-aware drivers choose to control their own
mapping but still make DMA API calls, however it also affects the case
when the arch code itself tears down the mapping upon driver unbinding,
where the ops now get left in place and can inhibit arch_setup_dma_ops()
on subsequent re-probe attempts.

Fix the latter case by making sure that arch_teardown_dma_ops() cleans
up whenever the ops were automatically installed by its counterpart.

Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 1874619a7df4 "ARM: dma-mapping: Set proper DMA ops in arm_iommu_detach_device()"
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/dma-mapping.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 1cb9c0f9b5d6..8211cf45ece1 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -2400,4 +2400,6 @@ void arch_teardown_dma_ops(struct device *dev)
 		return;
 
 	arm_teardown_iommu_dma_ops(dev);
+	/* Let arch_setup_dma_ops() start again from scratch upon re-probe */
+	set_dma_ops(dev, NULL);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 10/48] assoc_array: Fix shortcut creation

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit bb2ba2d75a2d673e76ddaf13a9bd30d6a8b1bb08 ]

Fix the creation of shortcuts for which the length of the index key value
is an exact multiple of the machine word size.  The problem is that the
code that blanks off the unused bits of the shortcut value malfunctions if
the number of bits in the last word equals machine word size.  This is due
to the "<<" operator being given a shift of zero in this case, and so the
mask that should be all zeros is all ones instead.  This causes the
subsequent masking operation to clear everything rather than clearing
nothing.

Ordinarily, the presence of the hash at the beginning of the tree index key
makes the issue very hard to test for, but in this case, it was encountered
due to a development mistake that caused the hash output to be either 0
(keyring) or 1 (non-keyring) only.  This made it susceptible to the
keyctl/unlink/valid test in the keyutils package.

The fix is simply to skip the blanking if the shift would be 0.  For
example, an index key that is 64 bits long would produce a 0 shift and thus
a 'blank' of all 1s.  This would then be inverted and AND'd onto the
index_key, incorrectly clearing the entire last word.

Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/assoc_array.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/lib/assoc_array.c b/lib/assoc_array.c
index c6659cb37033..59875eb278ea 100644
--- a/lib/assoc_array.c
+++ b/lib/assoc_array.c
@@ -768,9 +768,11 @@ static bool assoc_array_insert_into_terminal_node(struct assoc_array_edit *edit,
 		new_s0->index_key[i] =
 			ops->get_key_chunk(index_key, i * ASSOC_ARRAY_KEY_CHUNK_SIZE);
 
-	blank = ULONG_MAX << (level & ASSOC_ARRAY_KEY_CHUNK_MASK);
-	pr_devel("blank off [%zu] %d: %lx\n", keylen - 1, level, blank);
-	new_s0->index_key[keylen - 1] &= ~blank;
+	if (level & ASSOC_ARRAY_KEY_CHUNK_MASK) {
+		blank = ULONG_MAX << (level & ASSOC_ARRAY_KEY_CHUNK_MASK);
+		pr_devel("blank off [%zu] %d: %lx\n", keylen - 1, level, blank);
+		new_s0->index_key[keylen - 1] &= ~blank;
+	}
 
 	/* This now reduces to a node splitting exercise for which we'll need
 	 * to regenerate the disparity table.
-- 
2.19.1

[PATCH AUTOSEL 4.19 11/48] keys: Fix dependency loop between construction record and auth key

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 822ad64d7e46a8e2c8b8a796738d7b657cbb146d ]

In the request_key() upcall mechanism there's a dependency loop by which if
a key type driver overrides the ->request_key hook and the userspace side
manages to lose the authorisation key, the auth key and the internal
construction record (struct key_construction) can keep each other pinned.

Fix this by the following changes:

 (1) Killing off the construction record and using the auth key instead.

 (2) Including the operation name in the auth key payload and making the
     payload available outside of security/keys/.

 (3) The ->request_key hook is given the authkey instead of the cons
     record and operation name.

Changes (2) and (3) allow the auth key to naturally be cleaned up if the
keyring it is in is destroyed or cleared or the auth key is unlinked.

Fixes: 7ee02a316600 ("keys: Fix dependency loop between construction record and auth key")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4idmap.c                   | 31 ++++++------
 include/keys/request_key_auth-type.h | 36 ++++++++++++++
 include/linux/key-type.h             | 22 +++------
 security/keys/internal.h             | 13 +----
 security/keys/keyctl.c               |  1 +
 security/keys/process_keys.c         |  1 +
 security/keys/request_key.c          | 72 +++++++++++-----------------
 security/keys/request_key_auth.c     | 16 ++++---
 8 files changed, 100 insertions(+), 92 deletions(-)
 create mode 100644 include/keys/request_key_auth-type.h

diff --git a/fs/nfs/nfs4idmap.c b/fs/nfs/nfs4idmap.c
index 3f23b6840547..bf34ddaa2ad7 100644
--- a/fs/nfs/nfs4idmap.c
+++ b/fs/nfs/nfs4idmap.c
@@ -44,6 +44,7 @@
 #include <linux/keyctl.h>
 #include <linux/key-type.h>
 #include <keys/user-type.h>
+#include <keys/request_key_auth-type.h>
 #include <linux/module.h>
 
 #include "internal.h"
@@ -59,7 +60,7 @@ static struct key_type key_type_id_resolver_legacy;
 struct idmap_legacy_upcalldata {
 	struct rpc_pipe_msg pipe_msg;
 	struct idmap_msg idmap_msg;
-	struct key_construction	*key_cons;
+	struct key	*authkey;
 	struct idmap *idmap;
 };
 
@@ -384,7 +385,7 @@ static const match_table_t nfs_idmap_tokens = {
 	{ Opt_find_err, NULL }
 };
 
-static int nfs_idmap_legacy_upcall(struct key_construction *, const char *, void *);
+static int nfs_idmap_legacy_upcall(struct key *, void *);
 static ssize_t idmap_pipe_downcall(struct file *, const char __user *,
 				   size_t);
 static void idmap_release_pipe(struct inode *);
@@ -549,11 +550,12 @@ nfs_idmap_prepare_pipe_upcall(struct idmap *idmap,
 static void
 nfs_idmap_complete_pipe_upcall_locked(struct idmap *idmap, int ret)
 {
-	struct key_construction *cons = idmap->idmap_upcall_data->key_cons;
+	struct key *authkey = idmap->idmap_upcall_data->authkey;
 
 	kfree(idmap->idmap_upcall_data);
 	idmap->idmap_upcall_data = NULL;
-	complete_request_key(cons, ret);
+	complete_request_key(authkey, ret);
+	key_put(authkey);
 }
 
 static void
@@ -563,15 +565,14 @@ nfs_idmap_abort_pipe_upcall(struct idmap *idmap, int ret)
 		nfs_idmap_complete_pipe_upcall_locked(idmap, ret);
 }
 
-static int nfs_idmap_legacy_upcall(struct key_construction *cons,
-				   const char *op,
-				   void *aux)
+static int nfs_idmap_legacy_upcall(struct key *authkey, void *aux)
 {
 	struct idmap_legacy_upcalldata *data;
+	struct request_key_auth *rka = get_request_key_auth(authkey);
 	struct rpc_pipe_msg *msg;
 	struct idmap_msg *im;
 	struct idmap *idmap = (struct idmap *)aux;
-	struct key *key = cons->key;
+	struct key *key = rka->target_key;
 	int ret = -ENOKEY;
 
 	if (!aux)
@@ -586,7 +587,7 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons,
 	msg = &data->pipe_msg;
 	im = &data->idmap_msg;
 	data->idmap = idmap;
-	data->key_cons = cons;
+	data->authkey = key_get(authkey);
 
 	ret = nfs_idmap_prepare_message(key->description, idmap, im, msg);
 	if (ret < 0)
@@ -604,7 +605,7 @@ static int nfs_idmap_legacy_upcall(struct key_construction *cons,
 out2:
 	kfree(data);
 out1:
-	complete_request_key(cons, ret);
+	complete_request_key(authkey, ret);
 	return ret;
 }
 
@@ -651,9 +652,10 @@ static int nfs_idmap_read_and_verify_message(struct idmap_msg *im,
 static ssize_t
 idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen)
 {
+	struct request_key_auth *rka;
 	struct rpc_inode *rpci = RPC_I(file_inode(filp));
 	struct idmap *idmap = (struct idmap *)rpci->private;
-	struct key_construction *cons;
+	struct key *authkey;
 	struct idmap_msg im;
 	size_t namelen_in;
 	int ret = -ENOKEY;
@@ -665,7 +667,8 @@ idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen)
 	if (idmap->idmap_upcall_data == NULL)
 		goto out_noupcall;
 
-	cons = idmap->idmap_upcall_data->key_cons;
+	authkey = idmap->idmap_upcall_data->authkey;
+	rka = get_request_key_auth(authkey);
 
 	if (mlen != sizeof(im)) {
 		ret = -ENOSPC;
@@ -690,9 +693,9 @@ idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen)
 
 	ret = nfs_idmap_read_and_verify_message(&im,
 			&idmap->idmap_upcall_data->idmap_msg,
-			cons->key, cons->authkey);
+			rka->target_key, authkey);
 	if (ret >= 0) {
-		key_set_timeout(cons->key, nfs_idmap_cache_timeout);
+		key_set_timeout(rka->target_key, nfs_idmap_cache_timeout);
 		ret = mlen;
 	}
 
diff --git a/include/keys/request_key_auth-type.h b/include/keys/request_key_auth-type.h
new file mode 100644
index 000000000000..a726dd3f1dc6
--- /dev/null
+++ b/include/keys/request_key_auth-type.h
@@ -0,0 +1,36 @@
+/* request_key authorisation token key type
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _KEYS_REQUEST_KEY_AUTH_TYPE_H
+#define _KEYS_REQUEST_KEY_AUTH_TYPE_H
+
+#include <linux/key.h>
+
+/*
+ * Authorisation record for request_key().
+ */
+struct request_key_auth {
+	struct key		*target_key;
+	struct key		*dest_keyring;
+	const struct cred	*cred;
+	void			*callout_info;
+	size_t			callout_len;
+	pid_t			pid;
+	char			op[8];
+} __randomize_layout;
+
+static inline struct request_key_auth *get_request_key_auth(const struct key *key)
+{
+	return key->payload.data[0];
+}
+
+
+#endif /* _KEYS_REQUEST_KEY_AUTH_TYPE_H */
diff --git a/include/linux/key-type.h b/include/linux/key-type.h
index 05d8fb5a06c4..d3c5ae8ad498 100644
--- a/include/linux/key-type.h
+++ b/include/linux/key-type.h
@@ -17,15 +17,6 @@
 
 #ifdef CONFIG_KEYS
 
-/*
- * key under-construction record
- * - passed to the request_key actor if supplied
- */
-struct key_construction {
-	struct key	*key;	/* key being constructed */
-	struct key	*authkey;/* authorisation for key being constructed */
-};
-
 /*
  * Pre-parsed payload, used by key add, update and instantiate.
  *
@@ -47,8 +38,7 @@ struct key_preparsed_payload {
 	time64_t	expiry;		/* Expiry time of key */
 } __randomize_layout;
 
-typedef int (*request_key_actor_t)(struct key_construction *key,
-				   const char *op, void *aux);
+typedef int (*request_key_actor_t)(struct key *auth_key, void *aux);
 
 /*
  * Preparsed matching criterion.
@@ -170,20 +160,20 @@ extern int key_instantiate_and_link(struct key *key,
 				    const void *data,
 				    size_t datalen,
 				    struct key *keyring,
-				    struct key *instkey);
+				    struct key *authkey);
 extern int key_reject_and_link(struct key *key,
 			       unsigned timeout,
 			       unsigned error,
 			       struct key *keyring,
-			       struct key *instkey);
-extern void complete_request_key(struct key_construction *cons, int error);
+			       struct key *authkey);
+extern void complete_request_key(struct key *authkey, int error);
 
 static inline int key_negate_and_link(struct key *key,
 				      unsigned timeout,
 				      struct key *keyring,
-				      struct key *instkey)
+				      struct key *authkey)
 {
-	return key_reject_and_link(key, timeout, ENOKEY, keyring, instkey);
+	return key_reject_and_link(key, timeout, ENOKEY, keyring, authkey);
 }
 
 extern int generic_key_instantiate(struct key *key, struct key_preparsed_payload *prep);
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 9f8208dc0e55..a02742621c8d 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -188,20 +188,9 @@ static inline int key_permission(const key_ref_t key_ref, unsigned perm)
 	return key_task_permission(key_ref, current_cred(), perm);
 }
 
-/*
- * Authorisation record for request_key().
- */
-struct request_key_auth {
-	struct key		*target_key;
-	struct key		*dest_keyring;
-	const struct cred	*cred;
-	void			*callout_info;
-	size_t			callout_len;
-	pid_t			pid;
-} __randomize_layout;
-
 extern struct key_type key_type_request_key_auth;
 extern struct key *request_key_auth_new(struct key *target,
+					const char *op,
 					const void *callout_info,
 					size_t callout_len,
 					struct key *dest_keyring);
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 1ffe60bb2845..ca31af186abd 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -26,6 +26,7 @@
 #include <linux/security.h>
 #include <linux/uio.h>
 #include <linux/uaccess.h>
+#include <keys/request_key_auth-type.h>
 #include "internal.h"
 
 #define KEY_MAX_DESC_SIZE 4096
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index d5b25e535d3a..d776d2114651 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -20,6 +20,7 @@
 #include <linux/security.h>
 #include <linux/user_namespace.h>
 #include <linux/uaccess.h>
+#include <keys/request_key_auth-type.h>
 #include "internal.h"
 
 /* Session keyring create vs join semaphore */
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index 738553698649..1a547cec8385 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -18,31 +18,30 @@
 #include <linux/keyctl.h>
 #include <linux/slab.h>
 #include "internal.h"
+#include <keys/request_key_auth-type.h>
 
 #define key_negative_timeout	60	/* default timeout on a negative key's existence */
 
 /**
  * complete_request_key - Complete the construction of a key.
- * @cons: The key construction record.
+ * @auth_key: The authorisation key.
  * @error: The success or failute of the construction.
  *
  * Complete the attempt to construct a key.  The key will be negated
  * if an error is indicated.  The authorisation key will be revoked
  * unconditionally.
  */
-void complete_request_key(struct key_construction *cons, int error)
+void complete_request_key(struct key *authkey, int error)
 {
-	kenter("{%d,%d},%d", cons->key->serial, cons->authkey->serial, error);
+	struct request_key_auth *rka = get_request_key_auth(authkey);
+	struct key *key = rka->target_key;
+
+	kenter("%d{%d},%d", authkey->serial, key->serial, error);
 
 	if (error < 0)
-		key_negate_and_link(cons->key, key_negative_timeout, NULL,
-				    cons->authkey);
+		key_negate_and_link(key, key_negative_timeout, NULL, authkey);
 	else
-		key_revoke(cons->authkey);
-
-	key_put(cons->key);
-	key_put(cons->authkey);
-	kfree(cons);
+		key_revoke(authkey);
 }
 EXPORT_SYMBOL(complete_request_key);
 
@@ -91,21 +90,19 @@ static int call_usermodehelper_keys(const char *path, char **argv, char **envp,
  * Request userspace finish the construction of a key
  * - execute "/sbin/request-key <op> <key> <uid> <gid> <keyring> <keyring> <keyring>"
  */
-static int call_sbin_request_key(struct key_construction *cons,
-				 const char *op,
-				 void *aux)
+static int call_sbin_request_key(struct key *authkey, void *aux)
 {
 	static char const request_key[] = "/sbin/request-key";
+	struct request_key_auth *rka = get_request_key_auth(authkey);
 	const struct cred *cred = current_cred();
 	key_serial_t prkey, sskey;
-	struct key *key = cons->key, *authkey = cons->authkey, *keyring,
-		*session;
+	struct key *key = rka->target_key, *keyring, *session;
 	char *argv[9], *envp[3], uid_str[12], gid_str[12];
 	char key_str[12], keyring_str[3][12];
 	char desc[20];
 	int ret, i;
 
-	kenter("{%d},{%d},%s", key->serial, authkey->serial, op);
+	kenter("{%d},{%d},%s", key->serial, authkey->serial, rka->op);
 
 	ret = install_user_keyrings();
 	if (ret < 0)
@@ -163,7 +160,7 @@ static int call_sbin_request_key(struct key_construction *cons,
 	/* set up the argument list */
 	i = 0;
 	argv[i++] = (char *)request_key;
-	argv[i++] = (char *) op;
+	argv[i++] = (char *)rka->op;
 	argv[i++] = key_str;
 	argv[i++] = uid_str;
 	argv[i++] = gid_str;
@@ -191,7 +188,7 @@ static int call_sbin_request_key(struct key_construction *cons,
 	key_put(keyring);
 
 error_alloc:
-	complete_request_key(cons, ret);
+	complete_request_key(authkey, ret);
 	kleave(" = %d", ret);
 	return ret;
 }
@@ -205,42 +202,31 @@ static int construct_key(struct key *key, const void *callout_info,
 			 size_t callout_len, void *aux,
 			 struct key *dest_keyring)
 {
-	struct key_construction *cons;
 	request_key_actor_t actor;
 	struct key *authkey;
 	int ret;
 
 	kenter("%d,%p,%zu,%p", key->serial, callout_info, callout_len, aux);
 
-	cons = kmalloc(sizeof(*cons), GFP_KERNEL);
-	if (!cons)
-		return -ENOMEM;
-
 	/* allocate an authorisation key */
-	authkey = request_key_auth_new(key, callout_info, callout_len,
+	authkey = request_key_auth_new(key, "create", callout_info, callout_len,
 				       dest_keyring);
-	if (IS_ERR(authkey)) {
-		kfree(cons);
-		ret = PTR_ERR(authkey);
-		authkey = NULL;
-	} else {
-		cons->authkey = key_get(authkey);
-		cons->key = key_get(key);
+	if (IS_ERR(authkey))
+		return PTR_ERR(authkey);
 
-		/* make the call */
-		actor = call_sbin_request_key;
-		if (key->type->request_key)
-			actor = key->type->request_key;
+	/* Make the call */
+	actor = call_sbin_request_key;
+	if (key->type->request_key)
+		actor = key->type->request_key;
 
-		ret = actor(cons, "create", aux);
+	ret = actor(authkey, aux);
 
-		/* check that the actor called complete_request_key() prior to
-		 * returning an error */
-		WARN_ON(ret < 0 &&
-			!test_bit(KEY_FLAG_REVOKED, &authkey->flags));
-		key_put(authkey);
-	}
+	/* check that the actor called complete_request_key() prior to
+	 * returning an error */
+	WARN_ON(ret < 0 &&
+		!test_bit(KEY_FLAG_REVOKED, &authkey->flags));
 
+	key_put(authkey);
 	kleave(" = %d", ret);
 	return ret;
 }
@@ -275,7 +261,7 @@ static int construct_get_dest_keyring(struct key **_dest_keyring)
 			if (cred->request_key_auth) {
 				authkey = cred->request_key_auth;
 				down_read(&authkey->sem);
-				rka = authkey->payload.data[0];
+				rka = get_request_key_auth(authkey);
 				if (!test_bit(KEY_FLAG_REVOKED,
 					      &authkey->flags))
 					dest_keyring =
diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c
index 6797843154f0..5e515791ccd1 100644
--- a/security/keys/request_key_auth.c
+++ b/security/keys/request_key_auth.c
@@ -18,7 +18,7 @@
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 #include "internal.h"
-#include <keys/user-type.h>
+#include <keys/request_key_auth-type.h>
 
 static int request_key_auth_preparse(struct key_preparsed_payload *);
 static void request_key_auth_free_preparse(struct key_preparsed_payload *);
@@ -69,7 +69,7 @@ static int request_key_auth_instantiate(struct key *key,
 static void request_key_auth_describe(const struct key *key,
 				      struct seq_file *m)
 {
-	struct request_key_auth *rka = key->payload.data[0];
+	struct request_key_auth *rka = get_request_key_auth(key);
 
 	seq_puts(m, "key:");
 	seq_puts(m, key->description);
@@ -84,7 +84,7 @@ static void request_key_auth_describe(const struct key *key,
 static long request_key_auth_read(const struct key *key,
 				  char __user *buffer, size_t buflen)
 {
-	struct request_key_auth *rka = key->payload.data[0];
+	struct request_key_auth *rka = get_request_key_auth(key);
 	size_t datalen;
 	long ret;
 
@@ -110,7 +110,7 @@ static long request_key_auth_read(const struct key *key,
  */
 static void request_key_auth_revoke(struct key *key)
 {
-	struct request_key_auth *rka = key->payload.data[0];
+	struct request_key_auth *rka = get_request_key_auth(key);
 
 	kenter("{%d}", key->serial);
 
@@ -137,7 +137,7 @@ static void free_request_key_auth(struct request_key_auth *rka)
  */
 static void request_key_auth_destroy(struct key *key)
 {
-	struct request_key_auth *rka = key->payload.data[0];
+	struct request_key_auth *rka = get_request_key_auth(key);
 
 	kenter("{%d}", key->serial);
 
@@ -148,8 +148,9 @@ static void request_key_auth_destroy(struct key *key)
  * Create an authorisation token for /sbin/request-key or whoever to gain
  * access to the caller's security data.
  */
-struct key *request_key_auth_new(struct key *target, const void *callout_info,
-				 size_t callout_len, struct key *dest_keyring)
+struct key *request_key_auth_new(struct key *target, const char *op,
+				 const void *callout_info, size_t callout_len,
+				 struct key *dest_keyring)
 {
 	struct request_key_auth *rka, *irka;
 	const struct cred *cred = current->cred;
@@ -167,6 +168,7 @@ struct key *request_key_auth_new(struct key *target, const void *callout_info,
 	if (!rka->callout_info)
 		goto error_free_rka;
 	rka->callout_len = callout_len;
+	strlcpy(rka->op, op, sizeof(rka->op));
 
 	/* see if the calling process is already servicing the key request of
 	 * another process */
-- 
2.19.1

[PATCH AUTOSEL 4.19 12/48] scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task

[Sasha Levin]

From: Anoob Soman <anoob.soman@citrix.com>

[ Upstream commit 79edd00dc6a96644d76b4a1cb97d94d49e026768 ]

When a target sends Check Condition, whilst initiator is busy xmiting
re-queued data, could lead to race between iscsi_complete_task() and
iscsi_xmit_task() and eventually crashing with the following kernel
backtrace.

[3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
[3326150.987549] ALERT: IP: [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987571] WARN: PGD 569c8067 PUD 569c9067 PMD 0
[3326150.987582] WARN: Oops: 0002 [#1] SMP
[3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin
[3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1
[3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016
[3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi]
[3326150.987799] WARN: task: ffff8801d50f3800 ti: ffff8801f5458000 task.ti: ffff8801f5458000
[3326150.987810] WARN: RIP: e030:[<ffffffffa05ce70d>] [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987825] WARN: RSP: e02b:ffff8801f545bdb0 EFLAGS: 00010246
[3326150.987831] WARN: RAX: 00000000ffffffc3 RBX: ffff880282d2ab20 RCX: ffff88026b6ac480
[3326150.987842] WARN: RDX: 0000000000000000 RSI: 00000000fffffe01 RDI: ffff880282d2ab20
[3326150.987852] WARN: RBP: ffff8801f545bdc8 R08: 0000000000000000 R09: 0000000000000008
[3326150.987862] WARN: R10: 0000000000000000 R11: 000000000000fe88 R12: 0000000000000000
[3326150.987872] WARN: R13: ffff880282d2abe8 R14: ffff880282d2abd8 R15: ffff880282d2ac08
[3326150.987890] WARN: FS: 00007f5a866b4840(0000) GS:ffff88028a640000(0000) knlGS:0000000000000000
[3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[3326150.987907] WARN: CR2: 0000000000000078 CR3: 0000000070244000 CR4: 0000000000042660
[3326150.987918] WARN: Stack:
[3326150.987924] WARN: ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18
[3326150.987938] WARN: ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00
[3326150.987951] WARN: ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400
[3326150.987964] WARN: Call Trace:
[3326150.987975] WARN: [<ffffffffa05cea90>] iscsi_xmitworker+0x2f0/0x360 [libiscsi]
[3326150.987988] WARN: [<ffffffff8108862c>] process_one_work+0x1fc/0x3b0
[3326150.987997] WARN: [<ffffffff81088f95>] worker_thread+0x2a5/0x470
[3326150.988006] WARN: [<ffffffff8159cad8>] ? __schedule+0x648/0x870
[3326150.988015] WARN: [<ffffffff81088cf0>] ? rescuer_thread+0x300/0x300
[3326150.988023] WARN: [<ffffffff8108ddf5>] kthread+0xd5/0xe0
[3326150.988031] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988040] WARN: [<ffffffff815a0bcf>] ret_from_fork+0x3f/0x70
[3326150.988048] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988127] ALERT: RIP [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.988138] WARN: RSP <ffff8801f545bdb0>
[3326150.988144] WARN: CR2: 0000000000000078
[3326151.020366] WARN: ---[ end trace 1c60974d4678d81b ]---

Commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix
list corruption regression") introduced "taskqueuelock" to fix list
corruption during the race, but this wasn't enough.

Re-setting of conn->task to NULL, could race with iscsi_xmit_task().
iscsi_complete_task()
{
    ....
    if (conn->task == task)
        conn->task = NULL;
}

conn->task in iscsi_xmit_task() could be NULL and so will be task.
__iscsi_get_task(task) will crash (NullPtr de-ref), trying to access
refcount.

iscsi_xmit_task()
{
    struct iscsi_task *task = conn->task;

    __iscsi_get_task(task);
}

This commit will take extra conn->session->back_lock in iscsi_xmit_task()
to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if
iscsi_complete_task() wins the race.  If iscsi_xmit_task() wins the race,
iscsi_xmit_task() increments task->refcount
(__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task().

Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index f78d2e5c1471..4ad61cfa69c0 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1449,7 +1449,13 @@ static int iscsi_xmit_task(struct iscsi_conn *conn)
 	if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx))
 		return -ENODATA;
 
+	spin_lock_bh(&conn->session->back_lock);
+	if (conn->task == NULL) {
+		spin_unlock_bh(&conn->session->back_lock);
+		return -ENODATA;
+	}
 	__iscsi_get_task(task);
+	spin_unlock_bh(&conn->session->back_lock);
 	spin_unlock_bh(&conn->session->frwd_lock);
 	rc = conn->session->tt->xmit_task(task);
 	spin_lock_bh(&conn->session->frwd_lock);
-- 
2.19.1

[PATCH AUTOSEL 4.19 13/48] net: systemport: Fix reception of BPDUs

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit a40061ea2e39494104602b3048751341bda374a1 ]

SYSTEMPORT has its RXCHK parser block that attempts to validate the
packet structures, unfortunately setting the L2 header check bit will
cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look
like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type.

Fixes: 4e8aedfe78c7 ("net: systemport: Turn on offloads by default")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index fc16b2b0d0e9..0bdbc72605e1 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -134,6 +134,10 @@ static int bcm_sysport_set_rx_csum(struct net_device *dev,
 
 	priv->rx_chk_en = !!(wanted & NETIF_F_RXCSUM);
 	reg = rxchk_readl(priv, RXCHK_CONTROL);
+	/* Clear L2 header checks, which would prevent BPDUs
+	 * from being received.
+	 */
+	reg &= ~RXCHK_L2_HDR_DIS;
 	if (priv->rx_chk_en)
 		reg |= RXCHK_EN;
 	else
-- 
2.19.1

[PATCH AUTOSEL 4.19 14/48] net: dsa: bcm_sf2: Do not assume DSA master supports WoL

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit c3152ec4c0691e351f35a2f63347a464b5f35151 ]

We assume in the bcm_sf2 driver that the DSA master network device
supports ethtool_ops::{get,set}_wol operations, which is not a given.
Avoid de-referencing potentially non-existent function pointers and
check them as we should.

Fixes: 96e65d7f3f88 ("net: dsa: bcm_sf2: add support for Wake-on-LAN")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/bcm_sf2.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index fc8b48adf38b..a5e2d8df013b 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -724,10 +724,11 @@ static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
 {
 	struct net_device *p = ds->ports[port].cpu_dp->master;
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_wolinfo pwol;
+	struct ethtool_wolinfo pwol = { };
 
 	/* Get the parent device WoL settings */
-	p->ethtool_ops->get_wol(p, &pwol);
+	if (p->ethtool_ops->get_wol)
+		p->ethtool_ops->get_wol(p, &pwol);
 
 	/* Advertise the parent device supported settings */
 	wol->supported = pwol.supported;
@@ -748,9 +749,10 @@ static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
 	struct net_device *p = ds->ports[port].cpu_dp->master;
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	s8 cpu_port = ds->ports[port].cpu_dp->index;
-	struct ethtool_wolinfo pwol;
+	struct ethtool_wolinfo pwol =  { };
 
-	p->ethtool_ops->get_wol(p, &pwol);
+	if (p->ethtool_ops->get_wol)
+		p->ethtool_ops->get_wol(p, &pwol);
 	if (wol->wolopts & ~pwol.supported)
 		return -EINVAL;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 15/48] pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit c17abcfa93bf0be5e48bb011607d237ac2bfc839 ]

Fix the mismatch between the "sdxc_d13_1_a" pin group definition from
meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a").
This makes it possible to use "sdxc_d13_1_a" in device-tree files to
route the MMC data 1..3 pins to GPIOX_1..3.

Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index 91cffc051055..ead4beb5f55f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -665,7 +665,7 @@ static const char * const sd_a_groups[] = {
 
 static const char * const sdxc_a_groups[] = {
 	"sdxc_d0_0_a", "sdxc_d13_0_a", "sdxc_d47_a", "sdxc_clk_a",
-	"sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d0_13_1_a"
+	"sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d13_1_a"
 };
 
 static const char * const pcm_a_groups[] = {
-- 
2.19.1

[PATCH AUTOSEL 4.19 16/48] qmi_wwan: apply SET_DTR quirk to Sierra WP7607

[Sasha Levin]

From: Beniamino Galvani <bgalvani@redhat.com>

[ Upstream commit 97dc47a1308a3af46a09b1546cfb869f2e382a81 ]

The 1199:68C0 USB ID is reused by Sierra WP7607 which requires the DTR
quirk to be detected. Apply QMI_QUIRK_SET_DTR unconditionally as
already done for other IDs shared between different devices.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 6e381354f658..74bebbdb4b15 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1208,8 +1208,8 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
 	{QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */
 	{QMI_FIXED_INTF(0x1199, 0x68a2, 19)},	/* Sierra Wireless MC7710 in QMI mode */
-	{QMI_FIXED_INTF(0x1199, 0x68c0, 8)},	/* Sierra Wireless MC7304/MC7354 */
-	{QMI_FIXED_INTF(0x1199, 0x68c0, 10)},	/* Sierra Wireless MC7304/MC7354 */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 8)},	/* Sierra Wireless MC7304/MC7354, WP76xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 10)},/* Sierra Wireless MC7304/MC7354 */
 	{QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */
 	{QMI_FIXED_INTF(0x1199, 0x901f, 8)},    /* Sierra Wireless EM7355 */
 	{QMI_FIXED_INTF(0x1199, 0x9041, 8)},	/* Sierra Wireless MC7305/MC7355 */
-- 
2.19.1

[PATCH AUTOSEL 4.19 17/48] net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit e928b5d6b75e239feb9c6d5488974b6646a0ebc8 ]

If mv643xx_eth_shared_of_probe() fails, mv643xx_eth_shared_probe()
leaves clk enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mv643xx_eth.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 62f204f32316..59007d6cd36d 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2886,7 +2886,7 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 
 	ret = mv643xx_eth_shared_of_probe(pdev);
 	if (ret)
-		return ret;
+		goto err_put_clk;
 	pd = dev_get_platdata(&pdev->dev);
 
 	msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
@@ -2894,6 +2894,11 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 	infer_hw_params(msp);
 
 	return 0;
+
+err_put_clk:
+	if (!IS_ERR(msp->clk))
+		clk_disable_unprepare(msp->clk);
+	return ret;
 }
 
 static int mv643xx_eth_shared_remove(struct platform_device *pdev)
-- 
2.19.1

[PATCH AUTOSEL 4.19 18/48] xfrm: Fix inbound traffic via XFRM interfaces across network namespaces

[Sasha Levin]

From: Tobias Brunner <tobias@strongswan.org>

[ Upstream commit 660899ddf06ae8bb5bbbd0a19418b739375430c5 ]

After moving an XFRM interface to another namespace it stays associated
with the original namespace (net in `struct xfrm_if` and the list keyed
with `xfrmi_net_id`), allowing processes in the new namespace to use
SAs/policies that were created in the original namespace.  For instance,
this allows a keying daemon in one namespace to establish IPsec SAs for
other namespaces without processes there having access to the keys or IKE
credentials.

This worked fine for outbound traffic, however, for inbound traffic the
lookup for the interfaces and the policies used the incorrect namespace
(the one the XFRM interface was moved to).

Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_interface.c | 4 ++--
 net/xfrm/xfrm_policy.c    | 4 +++-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 6f05e831a73e..82723ef44db3 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -76,10 +76,10 @@ static struct xfrm_if *xfrmi_decode_session(struct sk_buff *skb)
 	int ifindex;
 	struct xfrm_if *xi;
 
-	if (!skb->dev)
+	if (!secpath_exists(skb) || !skb->dev)
 		return NULL;
 
-	xfrmn = net_generic(dev_net(skb->dev), xfrmi_net_id);
+	xfrmn = net_generic(xs_net(xfrm_input_state(skb)), xfrmi_net_id);
 	ifindex = skb->dev->ifindex;
 
 	for_each_xfrmi_rcu(xfrmn->xfrmi[0], xi) {
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 6ea8036fcdbe..bf5d59270f79 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2340,8 +2340,10 @@ int __xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb,
 
 	if (ifcb) {
 		xi = ifcb->decode_session(skb);
-		if (xi)
+		if (xi) {
 			if_id = xi->p.if_id;
+			net = xi->net;
+		}
 	}
 	rcu_read_unlock();
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 19/48] mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issue

[Sasha Levin]

From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>

[ Upstream commit d7bf31a0f85faaf63c63c39d55154825a1eaaea9 ]

RING_CONTROL reg was not written due to wrong address, hence all
the subsequent ring flush was timing out.

Fixes: a371c10ea4b3 ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence")

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mailbox/bcm-flexrm-mailbox.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mailbox/bcm-flexrm-mailbox.c b/drivers/mailbox/bcm-flexrm-mailbox.c
index 8ab077ff58f4..96bcabfebc23 100644
--- a/drivers/mailbox/bcm-flexrm-mailbox.c
+++ b/drivers/mailbox/bcm-flexrm-mailbox.c
@@ -1396,9 +1396,9 @@ static void flexrm_shutdown(struct mbox_chan *chan)
 
 	/* Clear ring flush state */
 	timeout = 1000; /* timeout of 1s */
-	writel_relaxed(0x0, ring + RING_CONTROL);
+	writel_relaxed(0x0, ring->regs + RING_CONTROL);
 	do {
-		if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
+		if (!(readl_relaxed(ring->regs + RING_FLUSH_DONE) &
 		      FLUSH_DONE_MASK))
 			break;
 		mdelay(1);
-- 
2.19.1

[PATCH AUTOSEL 4.19 20/48] ASoC: topology: free created components in tplg load error

[Sasha Levin]

From: Bard liao <yung-chuan.liao@linux.intel.com>

[ Upstream commit 304017d31df36fb61eb2ed3ebf65fb6870b3c731 ]

Topology resources are no longer needed if any element failed to load.

Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 66e77e020745..88a7e860b175 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2493,6 +2493,7 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
 	struct snd_soc_tplg_ops *ops, const struct firmware *fw, u32 id)
 {
 	struct soc_tplg tplg;
+	int ret;
 
 	/* setup parsing context */
 	memset(&tplg, 0, sizeof(tplg));
@@ -2506,7 +2507,12 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
 	tplg.bytes_ext_ops = ops->bytes_ext_ops;
 	tplg.bytes_ext_ops_count = ops->bytes_ext_ops_count;
 
-	return soc_tplg_load(&tplg);
+	ret = soc_tplg_load(&tplg);
+	/* free the created components if fail to load topology */
+	if (ret)
+		snd_soc_tplg_component_remove(comp, SND_SOC_TPLG_INDEX_ALL);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_tplg_component_load);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 21/48] qed: Fix iWARP buffer size provided for syn packet processing.

[Sasha Levin]

From: Michal Kalderon <michal.kalderon@marvell.com>

[ Upstream commit 9addc92730df55e2c05e8d3f69267a89d65bcba8 ]

The assumption that the maximum size of a syn packet is 128 bytes
is wrong. Tunneling headers were not accounted for.
Allocate buffers large enough for mtu.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 12 ++++++------
 drivers/net/ethernet/qlogic/qed/qed_iwarp.h |  1 -
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index e860bdf0f752..3c932f79a02e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -2606,7 +2606,7 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
 	struct qed_iwarp_info *iwarp_info;
 	struct qed_ll2_acquire_data data;
 	struct qed_ll2_cbs cbs;
-	u32 mpa_buff_size;
+	u32 buff_size;
 	u16 n_ooo_bufs;
 	int rc = 0;
 	int i;
@@ -2633,7 +2633,7 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
 
 	memset(&data, 0, sizeof(data));
 	data.input.conn_type = QED_LL2_TYPE_IWARP;
-	data.input.mtu = QED_IWARP_MAX_SYN_PKT_SIZE;
+	data.input.mtu = params->max_mtu;
 	data.input.rx_num_desc = QED_IWARP_LL2_SYN_RX_SIZE;
 	data.input.tx_num_desc = QED_IWARP_LL2_SYN_TX_SIZE;
 	data.input.tx_max_bds_per_packet = 1;	/* will never be fragmented */
@@ -2655,9 +2655,10 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
 		goto err;
 	}
 
+	buff_size = QED_IWARP_MAX_BUF_SIZE(params->max_mtu);
 	rc = qed_iwarp_ll2_alloc_buffers(p_hwfn,
 					 QED_IWARP_LL2_SYN_RX_SIZE,
-					 QED_IWARP_MAX_SYN_PKT_SIZE,
+					 buff_size,
 					 iwarp_info->ll2_syn_handle);
 	if (rc)
 		goto err;
@@ -2711,10 +2712,9 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
 	if (rc)
 		goto err;
 
-	mpa_buff_size = QED_IWARP_MAX_BUF_SIZE(params->max_mtu);
 	rc = qed_iwarp_ll2_alloc_buffers(p_hwfn,
 					 data.input.rx_num_desc,
-					 mpa_buff_size,
+					 buff_size,
 					 iwarp_info->ll2_mpa_handle);
 	if (rc)
 		goto err;
@@ -2727,7 +2727,7 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
 
 	iwarp_info->max_num_partial_fpdus = (u16)p_hwfn->p_rdma_info->num_qps;
 
-	iwarp_info->mpa_intermediate_buf = kzalloc(mpa_buff_size, GFP_KERNEL);
+	iwarp_info->mpa_intermediate_buf = kzalloc(buff_size, GFP_KERNEL);
 	if (!iwarp_info->mpa_intermediate_buf)
 		goto err;
 
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
index b8f612d00241..7ac959038324 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
@@ -46,7 +46,6 @@ enum qed_iwarp_qp_state qed_roce2iwarp_state(enum qed_roce_qp_state state);
 
 #define QED_IWARP_LL2_SYN_TX_SIZE       (128)
 #define QED_IWARP_LL2_SYN_RX_SIZE       (256)
-#define QED_IWARP_MAX_SYN_PKT_SIZE      (128)
 
 #define QED_IWARP_LL2_OOO_DEF_TX_SIZE   (256)
 #define QED_IWARP_MAX_OOO		(16)
-- 
2.19.1

[PATCH AUTOSEL 4.19 22/48] qed: Fix iWARP syn packet mac address validation.

[Sasha Levin]

From: Michal Kalderon <michal.kalderon@marvell.com>

[ Upstream commit 8be3dadf04050c2907760ec1955ca1c8fbc25585 ]

The ll2 forwards all syn packets to the driver without validating the mac
address. Add validation check in the driver's iWARP listener flow and drop
the packet if it isn't intended for the device.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index 3c932f79a02e..b7471e48db7b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -1689,6 +1689,15 @@ qed_iwarp_parse_rx_pkt(struct qed_hwfn *p_hwfn,
 
 	eth_hlen = ETH_HLEN + (vlan_valid ? sizeof(u32) : 0);
 
+	if (!ether_addr_equal(ethh->h_dest,
+			      p_hwfn->p_rdma_info->iwarp.mac_addr)) {
+		DP_VERBOSE(p_hwfn,
+			   QED_MSG_RDMA,
+			   "Got unexpected mac %pM instead of %pM\n",
+			   ethh->h_dest, p_hwfn->p_rdma_info->iwarp.mac_addr);
+		return -EINVAL;
+	}
+
 	ether_addr_copy(remote_mac_addr, ethh->h_source);
 	ether_addr_copy(local_mac_addr, ethh->h_dest);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 23/48] ARM: dts: armada-xp: fix Armada XP boards NAND description

[Sasha Levin]

From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

[ Upstream commit 6fc979179c98d2591784937d5618edc3e5cd31c1 ]

Commit 3b79919946cd2cf4dac47842afc9a893acec4ed7 ("ARM: dts:
armada-370-xp: update NAND node with new bindings") updated some
Marvell Armada DT description to use the new NAND controller bindings,
but did it incorrectly for a number of boards: armada-xp-gp,
armada-xp-db and armada-xp-lenovo-ix4-300d. Due to this, the NAND is
no longer detected on those platforms.

This commit fixes that by properly using the new NAND DT binding. This
commit was runtime-tested on Armada XP GP, the two other platforms are
only compile-tested.

Fixes: 3b79919946cd2 ("ARM: dts: armada-370-xp: update NAND node with new bindings")
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/armada-xp-db.dts            | 46 +++++-----
 arch/arm/boot/dts/armada-xp-gp.dts            | 13 +--
 .../boot/dts/armada-xp-lenovo-ix4-300d.dts    | 85 ++++++++++---------
 3 files changed, 76 insertions(+), 68 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index f3ac7483afed..5d04dc68cf57 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -144,30 +144,32 @@
 				status = "okay";
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x800000>;
-					};
-					partition@800000 {
-						label = "Linux";
-						reg = <0x800000 0x800000>;
-					};
-					partition@1000000 {
-						label = "Filesystem";
-						reg = <0x1000000 0x3f000000>;
 
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "U-Boot";
+							reg = <0 0x800000>;
+						};
+						partition@800000 {
+							label = "Linux";
+							reg = <0x800000 0x800000>;
+						};
+						partition@1000000 {
+							label = "Filesystem";
+							reg = <0x1000000 0x3f000000>;
+						};
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 1139e9469a83..b4cca507cf13 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -160,12 +160,15 @@
 				status = "okay";
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index bbbb38888bb8..87dcb502f72d 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -81,49 +81,52 @@
 
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x00000000 0x000e0000>;
-						read-only;
-					};
-
-					partition@e0000 {
-						label = "u-boot-env";
-						reg = <0x000e0000 0x00020000>;
-						read-only;
-					};
-
-					partition@100000 {
-						label = "u-boot-env2";
-						reg = <0x00100000 0x00020000>;
-						read-only;
-					};
-
-					partition@120000 {
-						label = "zImage";
-						reg = <0x00120000 0x00400000>;
-					};
-
-					partition@520000 {
-						label = "initrd";
-						reg = <0x00520000 0x00400000>;
-					};
 
-					partition@e00000 {
-						label = "boot";
-						reg = <0x00e00000 0x3f200000>;
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x000e0000>;
+							read-only;
+						};
+
+						partition@e0000 {
+							label = "u-boot-env";
+							reg = <0x000e0000 0x00020000>;
+							read-only;
+						};
+
+						partition@100000 {
+							label = "u-boot-env2";
+							reg = <0x00100000 0x00020000>;
+							read-only;
+						};
+
+						partition@120000 {
+							label = "zImage";
+							reg = <0x00120000 0x00400000>;
+						};
+
+						partition@520000 {
+							label = "initrd";
+							reg = <0x00520000 0x00400000>;
+						};
+
+						partition@e00000 {
+							label = "boot";
+							reg = <0x00e00000 0x3f200000>;
+						};
 					};
 				};
 			};
-- 
2.19.1

[PATCH AUTOSEL 4.19 24/48] arm64: Relax GIC version check during early boot

[Sasha Levin]

From: Vladimir Murzin <vladimir.murzin@arm.com>

[ Upstream commit 74698f6971f25d045301139413578865fc2bd8f9 ]

Updates to the GIC architecture allow ID_AA64PFR0_EL1.GIC to have
values other than 0 or 1. At the moment, Linux is quite strict in the
way it handles this field at early boot stage (cpufeature is fine) and
will refuse to use the system register CPU interface if it doesn't
find the value 1.

Fixes: 021f653791ad17e03f98aaa7fb933816ae16f161 ("irqchip: gic-v3: Initial support for GICv3")
Reported-by: Chase Conklin <Chase.Conklin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/head.S | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 651a06b1980f..77ca59598c8b 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -522,8 +522,7 @@ set_hcr:
 	/* GICv3 system register access */
 	mrs	x0, id_aa64pfr0_el1
 	ubfx	x0, x0, #24, #4
-	cmp	x0, #1
-	b.ne	3f
+	cbz	x0, 3f
 
 	mrs_s	x0, SYS_ICC_SRE_EL2
 	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
-- 
2.19.1

[PATCH AUTOSEL 4.19 25/48] ARM: tegra: Restore DT ABI on Tegra124 Chromebooks

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 94d9b9337d09bdd27735005b3251d97ab29f7273 ]

Commit 482997699ef0 ("ARM: tegra: Fix unit_address_vs_reg DTC warnings
for /memory") inadventently broke device tree ABI by adding a unit-
address to the "/memory" node because the device tree compiler flagged
the missing unit-address as a warning.

Tegra124 Chromebooks (a.k.a. Nyan) use a bootloader that relies on the
full name of the memory node in device tree being exactly "/memory". It
can be argued whether this was a good decision or not, and some other
bootloaders (such as U-Boot) do accept a unit-address in the name of the
node, but the device tree is an ABI and we can't break existing setups
just because the device tree compiler considers it bad practice to omit
the unit-address nowadays.

This partially reverts the offending commit and restores device tree ABI
compatibility.

Fixes: 482997699ef0 ("ARM: tegra: Fix unit_address_vs_reg DTC warnings for /memory")
Reported-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra124-nyan.dtsi | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index d5f11d6d987e..bc85b6a166c7 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -13,10 +13,25 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@80000000 {
+	/*
+	 * Note that recent version of the device tree compiler (starting with
+	 * version 1.4.2) warn about this node containing a reg property, but
+	 * missing a unit-address. However, the bootloader on these Chromebook
+	 * devices relies on the full name of this node to be exactly /memory.
+	 * Adding the unit-address causes the bootloader to create a /memory
+	 * node and write the memory bank configuration to that node, which in
+	 * turn leads the kernel to believe that the device has 2 GiB of
+	 * memory instead of the amount detected by the bootloader.
+	 *
+	 * The name of this node is effectively ABI and must not be changed.
+	 */
+	memory {
+		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
+	/delete-node/ memory@80000000;
+
 	host1x@50000000 {
 		hdmi@54280000 {
 			status = "okay";
-- 
2.19.1

[PATCH AUTOSEL 4.19 26/48] net: marvell: mvneta: fix DMA debug warning

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit a8fef9ba58c9966ddb1fec916d8d8137c9d8bc89 ]

Booting 4.20 on SolidRun Clearfog issues this warning with DMA API
debug enabled:

WARNING: CPU: 0 PID: 555 at kernel/dma/debug.c:1230 check_sync+0x514/0x5bc
mvneta f1070000.ethernet: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000002dd7dc00] [size=240 bytes]
Modules linked in: ahci mv88e6xxx dsa_core xhci_plat_hcd xhci_hcd devlink armada_thermal marvell_cesa des_generic ehci_orion phy_armada38x_comphy mcp3021 spi_orion evbug sfp mdio_i2c ip_tables x_tables
CPU: 0 PID: 555 Comm: bridge-network- Not tainted 4.20.0+ #291
Hardware name: Marvell Armada 380/385 (Device Tree)
[<c0019638>] (unwind_backtrace) from [<c0014888>] (show_stack+0x10/0x14)
[<c0014888>] (show_stack) from [<c07f54e0>] (dump_stack+0x9c/0xd4)
[<c07f54e0>] (dump_stack) from [<c00312bc>] (__warn+0xf8/0x124)
[<c00312bc>] (__warn) from [<c00313b0>] (warn_slowpath_fmt+0x38/0x48)
[<c00313b0>] (warn_slowpath_fmt) from [<c00b0370>] (check_sync+0x514/0x5bc)
[<c00b0370>] (check_sync) from [<c00b04f8>] (debug_dma_sync_single_range_for_cpu+0x6c/0x74)
[<c00b04f8>] (debug_dma_sync_single_range_for_cpu) from [<c051bd14>] (mvneta_poll+0x298/0xf58)
[<c051bd14>] (mvneta_poll) from [<c0656194>] (net_rx_action+0x128/0x424)
[<c0656194>] (net_rx_action) from [<c000a230>] (__do_softirq+0xf0/0x540)
[<c000a230>] (__do_softirq) from [<c00386e0>] (irq_exit+0x124/0x144)
[<c00386e0>] (irq_exit) from [<c009b5e0>] (__handle_domain_irq+0x58/0xb0)
[<c009b5e0>] (__handle_domain_irq) from [<c03a63c4>] (gic_handle_irq+0x48/0x98)
[<c03a63c4>] (gic_handle_irq) from [<c0009a10>] (__irq_svc+0x70/0x98)
...

This appears to be caused by mvneta_rx_hwbm() calling
dma_sync_single_range_for_cpu() with the wrong struct device pointer,
as the buffer manager device pointer is used to map and unmap the
buffer.  Fix this.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvneta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index a78a39244b79..2ba0d89aaf3c 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2147,7 +2147,7 @@ static int mvneta_rx_hwbm(struct napi_struct *napi,
 			if (unlikely(!skb))
 				goto err_drop_frame_ret_pool;
 
-			dma_sync_single_range_for_cpu(dev->dev.parent,
+			dma_sync_single_range_for_cpu(&pp->bm_priv->pdev->dev,
 			                              rx_desc->buf_phys_addr,
 			                              MVNETA_MH_SIZE + NET_SKB_PAD,
 			                              rx_bytes,
-- 
2.19.1

[PATCH AUTOSEL 4.19 27/48] kasan, slub: move kasan_poison_slab hook before page_address

[Sasha Levin]

From: Andrey Konovalov <andreyknvl@google.com>

[ Upstream commit a71012242837fe5e67d8c999cfc357174ed5dba0 ]

With tag based KASAN page_address() looks at the page flags to see whether
the resulting pointer needs to have a tag set.  Since we don't want to set
a tag when page_address() is called on SLAB pages, we call
page_kasan_tag_reset() in kasan_poison_slab().  However in allocate_slab()
page_address() is called before kasan_poison_slab().  Fix it by changing
the order.

[andreyknvl@google.com: fix compilation error when CONFIG_SLUB_DEBUG=n]
  Link: http://lkml.kernel.org/r/ac27cc0bbaeb414ed77bcd6671a877cf3546d56e.1550066133.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/cd895d627465a3f1c712647072d17f10883be2a1.1549921721.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slub.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/mm/slub.c b/mm/slub.c
index 8da34a8af53d..7666cff34bfb 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1075,6 +1075,16 @@ static void setup_object_debug(struct kmem_cache *s, struct page *page,
 	init_tracking(s, object);
 }
 
+static void setup_page_debug(struct kmem_cache *s, void *addr, int order)
+{
+	if (!(s->flags & SLAB_POISON))
+		return;
+
+	metadata_access_enable();
+	memset(addr, POISON_INUSE, PAGE_SIZE << order);
+	metadata_access_disable();
+}
+
 static inline int alloc_consistency_checks(struct kmem_cache *s,
 					struct page *page,
 					void *object, unsigned long addr)
@@ -1292,6 +1302,8 @@ slab_flags_t kmem_cache_flags(unsigned int object_size,
 #else /* !CONFIG_SLUB_DEBUG */
 static inline void setup_object_debug(struct kmem_cache *s,
 			struct page *page, void *object) {}
+static inline void setup_page_debug(struct kmem_cache *s,
+			void *addr, int order) {}
 
 static inline int alloc_debug_processing(struct kmem_cache *s,
 	struct page *page, void *object, unsigned long addr) { return 0; }
@@ -1602,12 +1614,11 @@ static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node)
 	if (page_is_pfmemalloc(page))
 		SetPageSlabPfmemalloc(page);
 
-	start = page_address(page);
+	kasan_poison_slab(page);
 
-	if (unlikely(s->flags & SLAB_POISON))
-		memset(start, POISON_INUSE, PAGE_SIZE << order);
+	start = page_address(page);
 
-	kasan_poison_slab(page);
+	setup_page_debug(s, start, order);
 
 	shuffle = shuffle_freelist(s, page);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 28/48] mm: handle lru_add_drain_all for UP properly

[Sasha Levin]

From: Michal Hocko <mhocko@suse.com>

[ Upstream commit 6ea183d60c469560e7b08a83c9804299e84ec9eb ]

Since for_each_cpu(cpu, mask) added by commit 2d3854a37e8b767a
("cpumask: introduce new API, without changing anything") did not
evaluate the mask argument if NR_CPUS == 1 due to CONFIG_SMP=n,
lru_add_drain_all() is hitting WARN_ON() at __flush_work() added by
commit 4d43d395fed12463 ("workqueue: Try to catch flush_work() without
INIT_WORK().") by unconditionally calling flush_work() [1].

Workaround this issue by using CONFIG_SMP=n specific lru_add_drain_all
implementation.  There is no real need to defer the implementation to
the workqueue as the draining is going to happen on the local cpu.  So
alias lru_add_drain_all to lru_add_drain which does all the necessary
work.

[akpm@linux-foundation.org: fix various build warnings]
[1] https://lkml.kernel.org/r/18a30387-6aa5-6123-e67c-57579ecc3f38@roeck-us.net
Link: http://lkml.kernel.org/r/20190213124334.GH4525@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Debugged-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/swap.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/mm/swap.c b/mm/swap.c
index 26fc9b5f1b6c..a3fc028e338e 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -321,11 +321,6 @@ static inline void activate_page_drain(int cpu)
 {
 }
 
-static bool need_activate_page_drain(int cpu)
-{
-	return false;
-}
-
 void activate_page(struct page *page)
 {
 	struct zone *zone = page_zone(page);
@@ -654,13 +649,15 @@ void lru_add_drain(void)
 	put_cpu();
 }
 
+#ifdef CONFIG_SMP
+
+static DEFINE_PER_CPU(struct work_struct, lru_add_drain_work);
+
 static void lru_add_drain_per_cpu(struct work_struct *dummy)
 {
 	lru_add_drain();
 }
 
-static DEFINE_PER_CPU(struct work_struct, lru_add_drain_work);
-
 /*
  * Doesn't need any cpu hotplug locking because we do rely on per-cpu
  * kworkers being shut down before our page_alloc_cpu_dead callback is
@@ -703,6 +700,12 @@ void lru_add_drain_all(void)
 
 	mutex_unlock(&lock);
 }
+#else
+void lru_add_drain_all(void)
+{
+	lru_add_drain();
+}
+#endif
 
 /**
  * release_pages - batched put_page()
-- 
2.19.1

[PATCH AUTOSEL 4.19 29/48] tmpfs: fix link accounting when a tmpfile is linked in

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit 1062af920c07f5b54cf5060fde3339da6df0cf6b ]

tmpfs has a peculiarity of accounting hard links as if they were
separate inodes: so that when the number of inodes is limited, as it is
by default, a user cannot soak up an unlimited amount of unreclaimable
dcache memory just by repeatedly linking a file.

But when v3.11 added O_TMPFILE, and the ability to use linkat() on the
fd, we missed accommodating this new case in tmpfs: "df -i" shows that
an extra "inode" remains accounted after the file is unlinked and the fd
closed and the actual inode evicted.  If a user repeatedly links
tmpfiles into a tmpfs, the limit will be hit (ENOSPC) even after they
are deleted.

Just skip the extra reservation from shmem_link() in this case: there's
a sense in which this first link of a tmpfile is then cheaper than a
hard link of another file, but the accounting works out, and there's
still good limiting, so no need to do anything more complicated.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1902182134370.7035@eggly.anvils
Fixes: f4e0c30c191 ("allow the temp files created by open() to be linked to")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Matej Kupljen <matej.kupljen@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/shmem.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/mm/shmem.c b/mm/shmem.c
index b6cf0e8e685b..bf13966b009c 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2901,10 +2901,14 @@ static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentr
 	 * No ordinary (disk based) filesystem counts links as inodes;
 	 * but each new link needs a new dentry, pinning lowmem, and
 	 * tmpfs dentries cannot be pruned until they are unlinked.
+	 * But if an O_TMPFILE file is linked into the tmpfs, the
+	 * first link must skip that, to get the accounting right.
 	 */
-	ret = shmem_reserve_inode(inode->i_sb);
-	if (ret)
-		goto out;
+	if (inode->i_nlink) {
+		ret = shmem_reserve_inode(inode->i_sb);
+		if (ret)
+			goto out;
+	}
 
 	dir->i_size += BOGO_DIRENT_SIZE;
 	inode->i_ctime = dir->i_ctime = dir->i_mtime = current_time(inode);
-- 
2.19.1

[PATCH AUTOSEL 4.19 30/48] kasan, slab: fix conflicts with CONFIG_HARDENED_USERCOPY

[Sasha Levin]

From: Andrey Konovalov <andreyknvl@google.com>

[ Upstream commit 219667c23c68eb3dbc0d5662b9246f28477fe529 ]

Similarly to commit 96fedce27e13 ("kasan: make tag based mode work with
CONFIG_HARDENED_USERCOPY"), we need to reset pointer tags in
__check_heap_object() in mm/slab.c before doing any pointer math.

Link: http://lkml.kernel.org/r/9a5c0f958db10e69df5ff9f2b997866b56b7effc.1550602886.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slab.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/mm/slab.c b/mm/slab.c
index fad6839e8eab..813bd89c263b 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -4421,6 +4421,8 @@ void __check_heap_object(const void *ptr, unsigned long n, struct page *page,
 	unsigned int objnr;
 	unsigned long offset;
 
+	ptr = kasan_reset_tag(ptr);
+
 	/* Find and validate object. */
 	cachep = page->slab_cache;
 	objnr = obj_to_index(cachep, page, (void *)ptr);
-- 
2.19.1

[PATCH AUTOSEL 4.19 31/48] kasan, slab: make freelist stored without tags

[Sasha Levin]

From: Andrey Konovalov <andreyknvl@google.com>

[ Upstream commit 51dedad06b5f6c3eea7ec1069631b1ef7796912a ]

Similarly to "kasan, slub: move kasan_poison_slab hook before
page_address", move kasan_poison_slab() before alloc_slabmgmt(), which
calls page_address(), to make page_address() return value to be
non-tagged.  This, combined with calling kasan_reset_tag() for off-slab
slab management object, leads to freelist being stored non-tagged.

Link: http://lkml.kernel.org/r/dfb53b44a4d00de3879a05a9f04c1f55e584f7a1.1550602886.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slab.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/mm/slab.c b/mm/slab.c
index 813bd89c263b..52c0420e4f93 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -2381,6 +2381,7 @@ static void *alloc_slabmgmt(struct kmem_cache *cachep,
 		/* Slab management obj is off-slab. */
 		freelist = kmem_cache_alloc_node(cachep->freelist_cache,
 					      local_flags, nodeid);
+		freelist = kasan_reset_tag(freelist);
 		if (!freelist)
 			return NULL;
 	} else {
@@ -2694,6 +2695,13 @@ static struct page *cache_grow_begin(struct kmem_cache *cachep,
 
 	offset *= cachep->colour_off;
 
+	/*
+	 * Call kasan_poison_slab() before calling alloc_slabmgmt(), so
+	 * page_address() in the latter returns a non-tagged pointer,
+	 * as it should be for slab pages.
+	 */
+	kasan_poison_slab(page);
+
 	/* Get slab management. */
 	freelist = alloc_slabmgmt(cachep, page, offset,
 			local_flags & ~GFP_CONSTRAINT_MASK, page_node);
@@ -2702,7 +2710,6 @@ static struct page *cache_grow_begin(struct kmem_cache *cachep,
 
 	slab_map_pages(cachep, page, freelist);
 
-	kasan_poison_slab(page);
 	cache_init_objs(cachep, page);
 
 	if (gfpflags_allow_blocking(local_flags))
-- 
2.19.1

[PATCH AUTOSEL 4.19 32/48] ixgbe: fix older devices that do not support IXGBE_MRQC_L3L4TXSWEN

[Sasha Levin]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

[ Upstream commit 156a67a9065e3339be85f811d1b13b920e50d73b ]

The enabling L3/L4 filtering for transmit switched packets for all
devices caused unforeseen issue on older devices when trying to send UDP
traffic in an ordered sequence.  This bit was originally intended for X550
devices, which supported this feature, so limit the scope of this bit to
only X550 devices.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 6cdd58d9d461..410d5d3aa393 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3924,8 +3924,11 @@ static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
 			else
 				mrqc = IXGBE_MRQC_VMDQRSS64EN;
 
-			/* Enable L3/L4 for Tx Switched packets */
-			mrqc |= IXGBE_MRQC_L3L4TXSWEN;
+			/* Enable L3/L4 for Tx Switched packets only for X550,
+			 * older devices do not support this feature
+			 */
+			if (hw->mac.type >= ixgbe_mac_X550)
+				mrqc |= IXGBE_MRQC_L3L4TXSWEN;
 		} else {
 			if (tcs > 4)
 				mrqc = IXGBE_MRQC_RTRSS8TCEN;
-- 
2.19.1

[PATCH AUTOSEL 4.19 33/48] ARCv2: lib: memcpy: fix doing prefetchw outside of buffer

[Sasha Levin]

From: Eugeniy Paltsev <eugeniy.paltsev@synopsys.com>

[ Upstream commit f8a15f97664178f27dfbf86a38f780a532cb6df0 ]

ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the
next cache line but doesn't ensure that the line is not past the end of
the buffer. PRETECHW changes the line ownership and marks it dirty,
which can cause data corruption if this area is used for DMA IO.

Fix the issue by avoiding the PREFETCHW. This leads to performance
degradation but it is OK as we'll introduce new memcpy implementation
optimized for unaligned memory access using.

We also cut off all PREFETCH instructions at they are quite useless
here:
 * we call PREFETCH right before LOAD instruction call.
 * we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64)
   in a main logical loop. so we call PREFETCH 4 times (or 2 times)
   for each L1 cache line (in case of 64B L1 cache Line which is
   default case). Obviously this is not optimal.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/lib/memcpy-archs.S | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arc/lib/memcpy-archs.S b/arch/arc/lib/memcpy-archs.S
index d61044dd8b58..ea14b0bf3116 100644
--- a/arch/arc/lib/memcpy-archs.S
+++ b/arch/arc/lib/memcpy-archs.S
@@ -25,15 +25,11 @@
 #endif
 
 #ifdef CONFIG_ARC_HAS_LL64
-# define PREFETCH_READ(RX)	prefetch    [RX, 56]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 64]
 # define LOADX(DST,RX)		ldd.ab	DST, [RX, 8]
 # define STOREX(SRC,RX)		std.ab	SRC, [RX, 8]
 # define ZOLSHFT		5
 # define ZOLAND			0x1F
 #else
-# define PREFETCH_READ(RX)	prefetch    [RX, 28]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 32]
 # define LOADX(DST,RX)		ld.ab	DST, [RX, 4]
 # define STOREX(SRC,RX)		st.ab	SRC, [RX, 4]
 # define ZOLSHFT		4
@@ -41,8 +37,6 @@
 #endif
 
 ENTRY_CFI(memcpy)
-	prefetch [r1]		; Prefetch the read location
-	prefetchw [r0]		; Prefetch the write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@@ -72,8 +66,6 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy32_64bytes
 	;; LOOP START
 	LOADX (r6, r1)
-	PREFETCH_READ (r1)
-	PREFETCH_WRITE (r3)
 	LOADX (r8, r1)
 	LOADX (r10, r1)
 	LOADX (r4, r1)
@@ -117,9 +109,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_1
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 24)
 	or	r7, r7, r5
@@ -162,9 +152,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_2
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 16)
 	or	r7, r7, r5
@@ -204,9 +192,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_3
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 8)
 	or	r7, r7, r5
-- 
2.19.1

[PATCH AUTOSEL 4.19 34/48] ARC: uacces: remove lp_start, lp_end from clobber list

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit d5e3c55e01d8b1774b37b4647c30fb22f1d39077 ]

Newer ARC gcc handles lp_start, lp_end in a different way and doesn't
like them in the clobber list.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/include/asm/uaccess.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index c9173c02081c..eabc3efa6c6d 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -207,7 +207,7 @@ raw_copy_from_user(void *to, const void __user *from, unsigned long n)
 		*/
 		  "=&r" (tmp), "+r" (to), "+r" (from)
 		:
-		: "lp_count", "lp_start", "lp_end", "memory");
+		: "lp_count", "memory");
 
 		return n;
 	}
@@ -433,7 +433,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 		 */
 		  "=&r" (tmp), "+r" (to), "+r" (from)
 		:
-		: "lp_count", "lp_start", "lp_end", "memory");
+		: "lp_count", "memory");
 
 		return n;
 	}
@@ -653,7 +653,7 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
 	"	.previous			\n"
 	: "+r"(d_char), "+r"(res)
 	: "i"(0)
-	: "lp_count", "lp_start", "lp_end", "memory");
+	: "lp_count", "memory");
 
 	return res;
 }
@@ -686,7 +686,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
 	"	.previous			\n"
 	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
 	: "g"(-EFAULT), "r"(count)
-	: "lp_count", "lp_start", "lp_end", "memory");
+	: "lp_count", "memory");
 
 	return res;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 35/48] ARCv2: support manual regfile save on interrupts

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit e494239a007e601448110ac304fe055951f9de3b ]

There's a hardware bug which affects the HSDK platform, triggered by
micro-ops for auto-saving regfile on taken interrupt. The workaround is
to inhibit autosave.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/Kconfig                   |  8 +++++
 arch/arc/include/asm/entry-arcv2.h | 54 ++++++++++++++++++++++++++++++
 arch/arc/kernel/entry-arcv2.S      |  4 ++-
 arch/arc/kernel/intc-arcv2.c       |  2 ++
 arch/arc/plat-hsdk/Kconfig         |  1 +
 5 files changed, 68 insertions(+), 1 deletion(-)

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index ac69f307dcfe..74953e76a57d 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -420,6 +420,14 @@ config ARC_HAS_ACCL_REGS
 	  (also referred to as r58:r59). These can also be used by gcc as GPR so
 	  kernel needs to save/restore per process
 
+config ARC_IRQ_NO_AUTOSAVE
+	bool "Disable hardware autosave regfile on interrupts"
+	default n
+	help
+	  On HS cores, taken interrupt auto saves the regfile on stack.
+	  This is programmable and can be optionally disabled in which case
+	  software INTERRUPT_PROLOGUE/EPILGUE do the needed work
+
 endif	# ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
index 309f4e6721b3..225e7df2d8ed 100644
--- a/arch/arc/include/asm/entry-arcv2.h
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -17,6 +17,33 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+	st.as	r9, [sp, -10]	; save r9 in it's final stack slot
+	sub	sp, sp, 12	; skip JLI, LDI, EI
+
+	PUSH	lp_count
+	PUSHAX	lp_start
+	PUSHAX	lp_end
+	PUSH	blink
+
+	PUSH	r11
+	PUSH	r10
+
+	sub	sp, sp, 4	; skip r9
+
+	PUSH	r8
+	PUSH	r7
+	PUSH	r6
+	PUSH	r5
+	PUSH	r4
+	PUSH	r3
+	PUSH	r2
+	PUSH	r1
+	PUSH	r0
+.endif
+#endif
+
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	PUSH	r59
 	PUSH	r58
@@ -86,6 +113,33 @@
 	POP	r59
 #endif
 
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+	POP	r0
+	POP	r1
+	POP	r2
+	POP	r3
+	POP	r4
+	POP	r5
+	POP	r6
+	POP	r7
+	POP	r8
+	POP	r9
+	POP	r10
+	POP	r11
+
+	POP	blink
+	POPAX	lp_end
+	POPAX	lp_start
+
+	POP	r9
+	mov	lp_count, r9
+
+	add	sp, sp, 12	; skip JLI, LDI, EI
+	ld.as	r9, [sp, -10]	; reload r9 which got clobbered
+.endif
+#endif
+
 .endm
 
 /*------------------------------------------------------------------------*/
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index cc558a25b8fa..562089d62d9d 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -209,7 +209,9 @@ restore_regs:
 ;####### Return from Intr #######
 
 debug_marker_l1:
-	bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+	; bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+	btst	r0, STATUS_DE_BIT		; Z flag set if bit clear
+	bnz	.Lintr_ret_to_delay_slot	; branch if STATUS_DE_BIT set
 
 .Lisr_ret_fast_path:
 	; Handle special case #1: (Entry via Exception, Return via IRQ)
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 067ea362fb3e..cf18b3e5a934 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -49,11 +49,13 @@ void arc_init_IRQ(void)
 
 	*(unsigned int *)&ictrl = 0;
 
+#ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
 	ictrl.save_nr_gpr_pairs = 6;	/* r0 to r11 (r12 saved manually) */
 	ictrl.save_blink = 1;
 	ictrl.save_lp_regs = 1;		/* LP_COUNT, LP_START, LP_END */
 	ictrl.save_u_to_u = 0;		/* user ctxt saved on kernel stack */
 	ictrl.save_idx_regs = 1;	/* JLI, LDI, EI */
+#endif
 
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index 9356753c2ed8..c285a83cbf08 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -9,6 +9,7 @@ menuconfig ARC_SOC_HSDK
 	bool "ARC HS Development Kit SOC"
 	depends on ISA_ARCV2
 	select ARC_HAS_ACCL_REGS
+	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
 	select RESET_HSDK
 	select MIGHT_HAVE_PCI
-- 
2.19.1

[PATCH AUTOSEL 4.19 36/48] ARCv2: don't assume core 0x54 has dual issue

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit 7b2e932f633bcb7b190fc7031ce6dac75f8c3472 ]

The first release of core4 (0x54) was dual issue only (HS4x).
Newer releases allow hardware to be configured as single issue (HS3x)
or dual issue.

Prevent accessing a HS4x only aux register in HS3x, which otherwise
leads to illegal instruction exceptions

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/include/asm/arcregs.h |  8 ++++++++
 arch/arc/kernel/setup.c        | 26 +++++++++++++++++++++-----
 2 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 49bfbd879caa..bdbdaef902eb 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -151,6 +151,14 @@ struct bcr_isa_arcv2 {
 #endif
 };
 
+struct bcr_uarch_build_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:8, prod:8, maj:8, min:8;
+#else
+	unsigned int min:8, maj:8, prod:8, pad:8;
+#endif
+};
+
 struct bcr_mpy {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 62a30e58441c..3320ca2fe20f 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -196,13 +196,29 @@ static void read_arc_build_cfg_regs(void)
 		cpu->bpu.num_pred = 2048 << bpu.pte;
 
 		if (cpu->core.family >= 0x54) {
-			unsigned int exec_ctrl;
 
-			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
-			cpu->extn.dual_enb = !(exec_ctrl & 1);
+			struct bcr_uarch_build_arcv2 uarch;
 
-			/* dual issue always present for this core */
-			cpu->extn.dual = 1;
+			/*
+			 * The first 0x54 core (uarch maj:min 0:1 or 0:2) was
+			 * dual issue only (HS4x). But next uarch rev (1:0)
+			 * allows it be configured for single issue (HS3x)
+			 * Ensure we fiddle with dual issue only on HS4x
+			 */
+			READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
+
+			if (uarch.prod == 4) {
+				unsigned int exec_ctrl;
+
+				/* dual issue hardware always present */
+				cpu->extn.dual = 1;
+
+				READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
+
+				/* dual issue hardware enabled ? */
+				cpu->extn.dual_enb = !(exec_ctrl & 1);
+
+			}
 		}
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 37/48] phonet: fix building with clang

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 6321aa197547da397753757bd84c6ce64b3e3d89 ]

clang warns about overflowing the data[] member in the struct pnpipehdr:

net/phonet/pep.c:295:8: warning: array index 4 is past the end of the array (which contains 1 element) [-Warray-bounds]
                        if (hdr->data[4] == PEP_IND_READY)
                            ^         ~
include/net/phonet/pep.h:66:3: note: array 'data' declared here
                u8              data[1];

Using a flexible array member at the end of the struct avoids the
warning, but since we cannot have a flexible array member inside
of the union, each index now has to be moved back by one, which
makes it a little uglier.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/phonet/pep.h |  5 +++--
 net/phonet/pep.c         | 32 ++++++++++++++++----------------
 2 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/include/net/phonet/pep.h b/include/net/phonet/pep.h
index b669fe6dbc3b..98f31c7ea23d 100644
--- a/include/net/phonet/pep.h
+++ b/include/net/phonet/pep.h
@@ -63,10 +63,11 @@ struct pnpipehdr {
 		u8		state_after_reset;	/* reset request */
 		u8		error_code;		/* any response */
 		u8		pep_type;		/* status indication */
-		u8		data[1];
+		u8		data0;			/* anything else */
 	};
+	u8			data[];
 };
-#define other_pep_type		data[1]
+#define other_pep_type		data[0]
 
 static inline struct pnpipehdr *pnp_hdr(struct sk_buff *skb)
 {
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 9fc76b19cd3c..db3473540303 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -132,7 +132,7 @@ static int pep_indicate(struct sock *sk, u8 id, u8 code,
 	ph->utid = 0;
 	ph->message_id = id;
 	ph->pipe_handle = pn->pipe_handle;
-	ph->data[0] = code;
+	ph->error_code = code;
 	return pn_skb_send(sk, skb, NULL);
 }
 
@@ -153,7 +153,7 @@ static int pipe_handler_request(struct sock *sk, u8 id, u8 code,
 	ph->utid = id; /* whatever */
 	ph->message_id = id;
 	ph->pipe_handle = pn->pipe_handle;
-	ph->data[0] = code;
+	ph->error_code = code;
 	return pn_skb_send(sk, skb, NULL);
 }
 
@@ -208,7 +208,7 @@ static int pep_ctrlreq_error(struct sock *sk, struct sk_buff *oskb, u8 code,
 	struct pnpipehdr *ph;
 	struct sockaddr_pn dst;
 	u8 data[4] = {
-		oph->data[0], /* PEP type */
+		oph->pep_type, /* PEP type */
 		code, /* error code, at an unusual offset */
 		PAD, PAD,
 	};
@@ -221,7 +221,7 @@ static int pep_ctrlreq_error(struct sock *sk, struct sk_buff *oskb, u8 code,
 	ph->utid = oph->utid;
 	ph->message_id = PNS_PEP_CTRL_RESP;
 	ph->pipe_handle = oph->pipe_handle;
-	ph->data[0] = oph->data[1]; /* CTRL id */
+	ph->data0 = oph->data[0]; /* CTRL id */
 
 	pn_skb_get_src_sockaddr(oskb, &dst);
 	return pn_skb_send(sk, skb, &dst);
@@ -272,17 +272,17 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
 		return -EINVAL;
 
 	hdr = pnp_hdr(skb);
-	if (hdr->data[0] != PN_PEP_TYPE_COMMON) {
+	if (hdr->pep_type != PN_PEP_TYPE_COMMON) {
 		net_dbg_ratelimited("Phonet unknown PEP type: %u\n",
-				    (unsigned int)hdr->data[0]);
+				    (unsigned int)hdr->pep_type);
 		return -EOPNOTSUPP;
 	}
 
-	switch (hdr->data[1]) {
+	switch (hdr->data[0]) {
 	case PN_PEP_IND_FLOW_CONTROL:
 		switch (pn->tx_fc) {
 		case PN_LEGACY_FLOW_CONTROL:
-			switch (hdr->data[4]) {
+			switch (hdr->data[3]) {
 			case PEP_IND_BUSY:
 				atomic_set(&pn->tx_credits, 0);
 				break;
@@ -292,7 +292,7 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
 			}
 			break;
 		case PN_ONE_CREDIT_FLOW_CONTROL:
-			if (hdr->data[4] == PEP_IND_READY)
+			if (hdr->data[3] == PEP_IND_READY)
 				atomic_set(&pn->tx_credits, wake = 1);
 			break;
 		}
@@ -301,12 +301,12 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
 	case PN_PEP_IND_ID_MCFC_GRANT_CREDITS:
 		if (pn->tx_fc != PN_MULTI_CREDIT_FLOW_CONTROL)
 			break;
-		atomic_add(wake = hdr->data[4], &pn->tx_credits);
+		atomic_add(wake = hdr->data[3], &pn->tx_credits);
 		break;
 
 	default:
 		net_dbg_ratelimited("Phonet unknown PEP indication: %u\n",
-				    (unsigned int)hdr->data[1]);
+				    (unsigned int)hdr->data[0]);
 		return -EOPNOTSUPP;
 	}
 	if (wake)
@@ -318,7 +318,7 @@ static int pipe_rcv_created(struct sock *sk, struct sk_buff *skb)
 {
 	struct pep_sock *pn = pep_sk(sk);
 	struct pnpipehdr *hdr = pnp_hdr(skb);
-	u8 n_sb = hdr->data[0];
+	u8 n_sb = hdr->data0;
 
 	pn->rx_fc = pn->tx_fc = PN_LEGACY_FLOW_CONTROL;
 	__skb_pull(skb, sizeof(*hdr));
@@ -506,7 +506,7 @@ static int pep_connresp_rcv(struct sock *sk, struct sk_buff *skb)
 		return -ECONNREFUSED;
 
 	/* Parse sub-blocks */
-	n_sb = hdr->data[4];
+	n_sb = hdr->data[3];
 	while (n_sb > 0) {
 		u8 type, buf[6], len = sizeof(buf);
 		const u8 *data = pep_get_sb(skb, &type, &len, buf);
@@ -739,7 +739,7 @@ static int pipe_do_remove(struct sock *sk)
 	ph->utid = 0;
 	ph->message_id = PNS_PIPE_REMOVE_REQ;
 	ph->pipe_handle = pn->pipe_handle;
-	ph->data[0] = PAD;
+	ph->data0 = PAD;
 	return pn_skb_send(sk, skb, NULL);
 }
 
@@ -817,7 +817,7 @@ static struct sock *pep_sock_accept(struct sock *sk, int flags, int *errp,
 	peer_type = hdr->other_pep_type << 8;
 
 	/* Parse sub-blocks (options) */
-	n_sb = hdr->data[4];
+	n_sb = hdr->data[3];
 	while (n_sb > 0) {
 		u8 type, buf[1], len = sizeof(buf);
 		const u8 *data = pep_get_sb(skb, &type, &len, buf);
@@ -1109,7 +1109,7 @@ static int pipe_skb_send(struct sock *sk, struct sk_buff *skb)
 	ph->utid = 0;
 	if (pn->aligned) {
 		ph->message_id = PNS_PIPE_ALIGNED_DATA;
-		ph->data[0] = 0; /* padding */
+		ph->data0 = 0; /* padding */
 	} else
 		ph->message_id = PNS_PIPE_DATA;
 	ph->pipe_handle = pn->pipe_handle;
-- 
2.19.1

[PATCH AUTOSEL 4.19 38/48] mac80211_hwsim: propagate genlmsg_reply return code

[Sasha Levin]

From: Li RongQing <lirongqing@baidu.com>

[ Upstream commit 17407715240456448e4989bee46ffc93991add83 ]

genlmsg_reply can fail, so propagate its return code

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mac80211_hwsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 4ca6592f5b3a..7cd428c0af43 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3454,7 +3454,7 @@ static int hwsim_get_radio_nl(struct sk_buff *msg, struct genl_info *info)
 			goto out_err;
 		}
 
-		genlmsg_reply(skb, info);
+		res = genlmsg_reply(skb, info);
 		break;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 39/48] bpf, lpm: fix lookup bug in map_delete_elem

[Sasha Levin]

From: Alban Crequy <alban@kinvolk.io>

[ Upstream commit 7c0cdf0b3940f63d9777c3fcf250a2f83859ca54 ]

trie_delete_elem() was deleting an entry even though it was not matching
if the prefixlen was correct. This patch adds a check on matchlen.

Reproducer:

$ sudo bpftool map create /sys/fs/bpf/mylpm type lpm_trie key 8 value 1 entries 128 name mylpm flags 1
$ sudo bpftool map update pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 aa bb cc dd value hex 01
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
key: 10 00 00 00 aa bb cc dd  value: 01
Found 1 element
$ sudo bpftool map delete pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 ff ff ff ff
$ echo $?
0
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
Found 0 elements

A similar reproducer is added in the selftests.

Without the patch:

$ sudo ./tools/testing/selftests/bpf/test_lpm_map
test_lpm_map: test_lpm_map.c:485: test_lpm_delete: Assertion `bpf_map_delete_elem(map_fd, key) == -1 && errno == ENOENT' failed.
Aborted

With the patch: test_lpm_map runs without errors.

Fixes: e454cf595853 ("bpf: Implement map_delete_elem for BPF_MAP_TYPE_LPM_TRIE")
Cc: Craig Gallek <kraig@google.com>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/lpm_trie.c                      |  1 +
 tools/testing/selftests/bpf/test_lpm_map.c | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/kernel/bpf/lpm_trie.c b/kernel/bpf/lpm_trie.c
index 9058317ba9de..4f3138e6ecb2 100644
--- a/kernel/bpf/lpm_trie.c
+++ b/kernel/bpf/lpm_trie.c
@@ -432,6 +432,7 @@ static int trie_delete_elem(struct bpf_map *map, void *_key)
 	}
 
 	if (!node || node->prefixlen != key->prefixlen ||
+	    node->prefixlen != matchlen ||
 	    (node->flags & LPM_TREE_NODE_FLAG_IM)) {
 		ret = -ENOENT;
 		goto out;
diff --git a/tools/testing/selftests/bpf/test_lpm_map.c b/tools/testing/selftests/bpf/test_lpm_map.c
index 147e34cfceb7..02d7c871862a 100644
--- a/tools/testing/selftests/bpf/test_lpm_map.c
+++ b/tools/testing/selftests/bpf/test_lpm_map.c
@@ -474,6 +474,16 @@ static void test_lpm_delete(void)
 	assert(bpf_map_lookup_elem(map_fd, key, &value) == -1 &&
 		errno == ENOENT);
 
+	key->prefixlen = 30; // unused prefix so far
+	inet_pton(AF_INET, "192.255.0.0", key->data);
+	assert(bpf_map_delete_elem(map_fd, key) == -1 &&
+		errno == ENOENT);
+
+	key->prefixlen = 16; // same prefix as the root node
+	inet_pton(AF_INET, "192.255.0.0", key->data);
+	assert(bpf_map_delete_elem(map_fd, key) == -1 &&
+		errno == ENOENT);
+
 	/* assert initial lookup */
 	key->prefixlen = 32;
 	inet_pton(AF_INET, "192.168.0.1", key->data);
-- 
2.19.1

[PATCH AUTOSEL 4.19 40/48] net: thunderx: make CFG_DONE message to run through generic send-ack sequence

[Sasha Levin]

From: Vadim Lomovtsev <vlomovtsev@marvell.com>

[ Upstream commit 0dd563b9a62c4cbabf5d4fd6596440c2491e72b1 ]

At the end of NIC VF initialization VF sends CFG_DONE message to PF without
using nicvf_msg_send_to_pf routine. This potentially could re-write data in
mailbox. This commit is to implement common way of sending CFG_DONE message
by the same way with other configuration messages by using
nicvf_send_msg_to_pf() routine.

Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/thunder/nic_main.c   |  2 +-
 drivers/net/ethernet/cavium/thunder/nicvf_main.c | 15 ++++++++++++---
 2 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index 6c8dcb65ff03..90497a27df18 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -1039,7 +1039,7 @@ static void nic_handle_mbx_intr(struct nicpf *nic, int vf)
 	case NIC_MBOX_MSG_CFG_DONE:
 		/* Last message of VF config msg sequence */
 		nic_enable_vf(nic, vf, true);
-		goto unlock;
+		break;
 	case NIC_MBOX_MSG_SHUTDOWN:
 		/* First msg in VF teardown sequence */
 		if (vf >= nic->num_vf_en)
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index 88f8a8fa93cd..4eb24e10ba4d 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -172,6 +172,17 @@ static int nicvf_check_pf_ready(struct nicvf *nic)
 	return 1;
 }
 
+static void nicvf_send_cfg_done(struct nicvf *nic)
+{
+	union nic_mbx mbx = {};
+
+	mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE;
+	if (nicvf_send_msg_to_pf(nic, &mbx)) {
+		netdev_err(nic->netdev,
+			   "PF didn't respond to CFG DONE msg\n");
+	}
+}
+
 static void nicvf_read_bgx_stats(struct nicvf *nic, struct bgx_stats_msg *bgx)
 {
 	if (bgx->rx)
@@ -1416,7 +1427,6 @@ int nicvf_open(struct net_device *netdev)
 	struct nicvf *nic = netdev_priv(netdev);
 	struct queue_set *qs = nic->qs;
 	struct nicvf_cq_poll *cq_poll = NULL;
-	union nic_mbx mbx = {};
 
 	netif_carrier_off(netdev);
 
@@ -1512,8 +1522,7 @@ int nicvf_open(struct net_device *netdev)
 		nicvf_enable_intr(nic, NICVF_INTR_RBDR, qidx);
 
 	/* Send VF config done msg to PF */
-	mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE;
-	nicvf_write_to_mbx(nic, &mbx);
+	nicvf_send_cfg_done(nic);
 
 	return 0;
 cleanup:
-- 
2.19.1

[PATCH AUTOSEL 4.19 41/48] net: thunderx: add nicvf_send_msg_to_pf result check for set_rx_mode_task

[Sasha Levin]

From: Vadim Lomovtsev <vlomovtsev@marvell.com>

[ Upstream commit 7db730d9d2f7b6af6aeac621b1890ea477a0cb8d ]

The rx_set_mode invokes number of messages to be send to PF for receive
mode configuration. In case if there any issues we need to stop sending
messages and release allocated memory.

This commit is to implement check of nicvf_msg_send_to_pf() result.

Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/thunder/nicvf_main.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index 4eb24e10ba4d..9800738448ec 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1950,7 +1950,8 @@ static void __nicvf_set_rx_mode_task(u8 mode, struct xcast_addr_list *mc_addrs,
 
 	/* flush DMAC filters and reset RX mode */
 	mbx.xcast.msg = NIC_MBOX_MSG_RESET_XCAST;
-	nicvf_send_msg_to_pf(nic, &mbx);
+	if (nicvf_send_msg_to_pf(nic, &mbx) < 0)
+		goto free_mc;
 
 	if (mode & BGX_XCAST_MCAST_FILTER) {
 		/* once enabling filtering, we need to signal to PF to add
@@ -1958,7 +1959,8 @@ static void __nicvf_set_rx_mode_task(u8 mode, struct xcast_addr_list *mc_addrs,
 		 */
 		mbx.xcast.msg = NIC_MBOX_MSG_ADD_MCAST;
 		mbx.xcast.data.mac = 0;
-		nicvf_send_msg_to_pf(nic, &mbx);
+		if (nicvf_send_msg_to_pf(nic, &mbx) < 0)
+			goto free_mc;
 	}
 
 	/* check if we have any specific MACs to be added to PF DMAC filter */
@@ -1967,9 +1969,9 @@ static void __nicvf_set_rx_mode_task(u8 mode, struct xcast_addr_list *mc_addrs,
 		for (idx = 0; idx < mc_addrs->count; idx++) {
 			mbx.xcast.msg = NIC_MBOX_MSG_ADD_MCAST;
 			mbx.xcast.data.mac = mc_addrs->mc[idx];
-			nicvf_send_msg_to_pf(nic, &mbx);
+			if (nicvf_send_msg_to_pf(nic, &mbx) < 0)
+				goto free_mc;
 		}
-		kfree(mc_addrs);
 	}
 
 	/* and finally set rx mode for PF accordingly */
@@ -1977,6 +1979,8 @@ static void __nicvf_set_rx_mode_task(u8 mode, struct xcast_addr_list *mc_addrs,
 	mbx.xcast.data.mode = mode;
 
 	nicvf_send_msg_to_pf(nic, &mbx);
+free_mc:
+	kfree(mc_addrs);
 }
 
 static void nicvf_set_rx_mode_task(struct work_struct *work_arg)
-- 
2.19.1

[PATCH AUTOSEL 4.19 42/48] nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K

[Sasha Levin]

From: Jiong Wang <jiong.wang@netronome.com>

[ Upstream commit 71c190249f0ced5b26377ea6bf829ab3af77a40c ]

The intended optimization should be A ^ 0 = A, not A ^ -1 = A.

Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator")
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/bpf/jit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/netronome/nfp/bpf/jit.c b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
index eff57f7d056a..0a934296ea53 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/jit.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
@@ -2306,7 +2306,7 @@ static int xor_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int xor_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !~meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !meta->insn.imm);
 }
 
 static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
-- 
2.19.1

[PATCH AUTOSEL 4.19 43/48] nfp: bpf: fix ALU32 high bits clearance bug

[Sasha Levin]

From: Jiong Wang <jiong.wang@netronome.com>

[ Upstream commit f036ebd9bfbe1e91a3d855e85e05fc5ff156b641 ]

NFP BPF JIT compiler is doing a couple of small optimizations when jitting
ALU imm instructions, some of these optimizations could save code-gen, for
example:

  A & -1 =  A
  A |  0 =  A
  A ^  0 =  A

However, for ALU32, high 32-bit of the 64-bit register should still be
cleared according to ISA semantics.

Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator")
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/bpf/jit.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/bpf/jit.c b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
index 0a934296ea53..4e18d95e548f 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/jit.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/jit.c
@@ -1288,15 +1288,10 @@ wrp_alu64_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta,
 
 static int
 wrp_alu32_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta,
-	      enum alu_op alu_op, bool skip)
+	      enum alu_op alu_op)
 {
 	const struct bpf_insn *insn = &meta->insn;
 
-	if (skip) {
-		meta->skip = true;
-		return 0;
-	}
-
 	wrp_alu_imm(nfp_prog, insn->dst_reg * 2, alu_op, insn->imm);
 	wrp_immed(nfp_prog, reg_both(insn->dst_reg * 2 + 1), 0);
 
@@ -2306,7 +2301,7 @@ static int xor_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int xor_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR);
 }
 
 static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -2316,7 +2311,7 @@ static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int and_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_AND, !~meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_AND);
 }
 
 static int or_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -2326,7 +2321,7 @@ static int or_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int or_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_OR, !meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_OR);
 }
 
 static int add_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -2336,7 +2331,7 @@ static int add_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int add_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_ADD, !meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_ADD);
 }
 
 static int sub_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -2346,7 +2341,7 @@ static int sub_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int sub_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_SUB, !meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_SUB);
 }
 
 static int mul_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
-- 
2.19.1

[PATCH AUTOSEL 4.19 44/48] bnxt_en: Fix typo in firmware message timeout logic.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 67681d02aaa1db9044a16df4ca9c77cde1221a3e ]

The logic that polls for the firmware message response uses a shorter
sleep interval for the first few passes.  But there was a typo so it
was using the wrong counter (larger counter) for these short sleep
passes.  The result is a slightly shorter timeout period for these
firmware messages than intended.  Fix it by using the proper counter.

Fixes: 9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 1fdaf86bbe8f..63b97289f4fe 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -3542,7 +3542,7 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len,
 			if (len)
 				break;
 			/* on first few passes, just barely sleep */
-			if (i < DFLT_HWRM_CMD_TIMEOUT)
+			if (i < HWRM_SHORT_TIMEOUT_COUNTER)
 				usleep_range(HWRM_SHORT_MIN_TIMEOUT,
 					     HWRM_SHORT_MAX_TIMEOUT);
 			else
-- 
2.19.1

[PATCH AUTOSEL 4.19 45/48] bnxt_en: Wait longer for the firmware message response to complete.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 0000b81a063b5f3ab82fa18041c28327ce72c312 ]

The code waits up to 20 usec for the firmware response to complete
once we've seen the valid response header in the buffer.  It turns
out that in some scenarios, this wait time is not long enough.
Extend it to 150 usec and use usleep_range() instead of udelay().

Fixes: 9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 63b97289f4fe..0bd93bb7d1a2 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -3565,7 +3565,7 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len,
 			dma_rmb();
 			if (*valid)
 				break;
-			udelay(1);
+			usleep_range(1, 5);
 		}
 
 		if (j >= HWRM_VALID_BIT_DELAY_USEC) {
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index bde384630a75..cf2d4a6583d5 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -548,7 +548,7 @@ struct rx_tpa_end_cmp_ext {
 	(HWRM_SHORT_TIMEOUT_COUNTER * HWRM_SHORT_MIN_TIMEOUT +		\
 	 ((n) - HWRM_SHORT_TIMEOUT_COUNTER) * HWRM_MIN_TIMEOUT))
 
-#define HWRM_VALID_BIT_DELAY_USEC	20
+#define HWRM_VALID_BIT_DELAY_USEC	150
 
 #define BNXT_RX_EVENT	1
 #define BNXT_AGG_EVENT	2
-- 
2.19.1

[PATCH AUTOSEL 4.19 46/48] mdio_bus: Fix use-after-free on device_register fails

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 6ff7b060535e87c2ae14dd8548512abfdda528fb ]

KASAN has found use-after-free in fixed_mdio_bus_init,
commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call
put_device on device_register() failure") call put_device()
while device_register() fails,give up the last reference
to the device and allow mdiobus_release to be executed
,kfreeing the bus. However in most drives, mdiobus_free
be called to free the bus while mdiobus_register fails.
use-after-free occurs when access bus again, this patch
revert it to let mdiobus_free free the bus.

KASAN report details as below:

BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524

CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy]
 ? 0xffffffffc0e40000
 ? 0xffffffffc0e40000
 ? 0xffffffffc0e40000
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004

Allocated by task 3524:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143
 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3524:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook mm/slub.c:1436 [inline]
 slab_free mm/slub.c:2986 [inline]
 kfree+0xe1/0x270 mm/slub.c:3938
 device_release+0x78/0x200 drivers/base/core.c:919
 kobject_cleanup lib/kobject.c:662 [inline]
 kobject_release lib/kobject.c:691 [inline]
 kref_put include/linux/kref.h:67 [inline]
 kobject_put+0x146/0x240 lib/kobject.c:708
 put_device+0x1c/0x30 drivers/base/core.c:2060
 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382
 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881dc824c80
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 248 bytes inside of
 2048-byte region [ffff8881dc824c80, ffff8881dc825480)
The buggy address belongs to the page:
page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0
flags: 0x2fffc0000010200(slab|head)
raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800
raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                                ^
 ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mdio_bus.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 15c5586d74ff..c5588d4508f9 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -380,7 +380,6 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 	err = device_register(&bus->dev);
 	if (err) {
 		pr_err("mii_bus %s failed to register\n", bus->id);
-		put_device(&bus->dev);
 		return -EINVAL;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 47/48] net: set static variable an initial value in atl2_probe()

[Sasha Levin]

From: Mao Wenan <maowenan@huawei.com>

[ Upstream commit 4593403fa516a5a4cffe6883c5062d60932cbfbe ]

cards_found is a static variable, but when it enters atl2_probe(),
cards_found is set to zero, the value is not consistent with last probe,
so next behavior is not our expect.

Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/atheros/atlx/atl2.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index bb41becb6609..31ff1e0d1baa 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -1335,13 +1335,11 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *netdev;
 	struct atl2_adapter *adapter;
-	static int cards_found;
+	static int cards_found = 0;
 	unsigned long mmio_start;
 	int mmio_len;
 	int err;
 
-	cards_found = 0;
-
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
-- 
2.19.1

[PATCH AUTOSEL 4.19 48/48] selftests: fib_tests: sleep after changing carrier. again.

[Sasha Levin]

From: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>

[ Upstream commit af548a27b158d548d41e56255e6eaca1658cc3be ]

Just like commit e2ba732a1681 ("selftests: fib_tests: sleep after
changing carrier"), wait one second to allow linkwatch to propagate the
carrier change to the stack.

There are two sets of carrier tests. The first slept after the carrier
was set to off, and when the second set ran, it was likely that the
linkwatch would be able to run again without much delay, reducing the
likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a
loop, you will quickly notice the failures.

Sleeping on the second set of tests make the failures go away.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/fib_tests.sh | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 0f45633bd634..a4ccde0e473b 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -385,6 +385,7 @@ fib_carrier_unicast_test()
 
 	set -e
 	$IP link set dev dummy0 carrier off
+	sleep 1
 	set +e
 
 	echo "    Carrier down"
-- 
2.19.1