From: Lina Iyer <ilina@codeaurora.org>
To: swboyd@chromium.org, evgreen@chromium.org, marc.zyngier@arm.com
Cc: linux-kernel@vger.kernel.org, rplsssn@codeaurora.org,
linux-arm-msm@vger.kernel.org, thierry.reding@gmail.com,
bjorn.andersson@linaro.org, dianders@chromium.org,
linus.walleij@linaro.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH v4 05/10] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs
Date: Wed, 13 Mar 2019 15:18:39 -0600 [thread overview]
Message-ID: <20190313211844.29416-6-ilina@codeaurora.org> (raw)
In-Reply-To: <20190313211844.29416-1-ilina@codeaurora.org>
Introduce a new domain for wakeup capable GPIOs. The domain can be
requested using the bus token DOMAIN_BUS_WAKEUP. In the following
patches, we will specify PDC as the wakeup-parent for the TLMM GPIO
irqchip. Requesting a wakeup GPIO will setup the GPIO and the
corresponding PDC interrupt as its parent.
Co-developed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
Changes in v4:
- Remove vestigial changes from v2
Changes in v3:
- Remove PDC GPIO map data (moved to DT)
- hwirq passed in .alloc() is a PDC pin now
Changes in v2:
- Remove separate file for PDC GPIO map data
- Error checks and return
- Whitespace fixes
---
drivers/irqchip/qcom-pdc.c | 72 ++++++++++++++++++++++++++++++++++--
include/linux/soc/qcom/irq.h | 23 ++++++++++++
2 files changed, 92 insertions(+), 3 deletions(-)
create mode 100644 include/linux/soc/qcom/irq.h
diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index faa7d61b9d6c..29118f6d84c3 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -13,12 +13,13 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/soc/qcom/irq.h>
#include <linux/spinlock.h>
-#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#define PDC_MAX_IRQS 126
+#define PDC_MAX_GPIO_IRQS 256
#define CLEAR_INTR(reg, intr) (reg & ~(1 << intr))
#define ENABLE_INTR(reg, intr) (reg | (1 << intr))
@@ -169,7 +170,6 @@ static irq_hw_number_t get_parent_hwirq(int pin)
return (region->parent_base + pin - region->pin_base);
}
- WARN_ON(1);
return ~0UL;
}
@@ -232,6 +232,60 @@ static const struct irq_domain_ops qcom_pdc_ops = {
.free = irq_domain_free_irqs_common,
};
+static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *data)
+{
+ struct qcom_irq_fwspec *qcom_fwspec = data;
+ struct irq_fwspec *fwspec = &qcom_fwspec->fwspec;
+ struct irq_fwspec parent_fwspec;
+ irq_hw_number_t hwirq, parent_hwirq;
+ unsigned int type;
+ int ret;
+
+ ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
+ if (ret)
+ return -EINVAL;
+
+ parent_hwirq = get_parent_hwirq(hwirq);
+ if (parent_hwirq == ~0UL)
+ return -EINVAL;
+
+ ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+ &qcom_pdc_gic_chip, NULL);
+ if (ret)
+ return ret;
+
+ qcom_fwspec->mask = true;
+
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ type = IRQ_TYPE_EDGE_RISING;
+
+ if (type & IRQ_TYPE_LEVEL_MASK)
+ type = IRQ_TYPE_LEVEL_HIGH;
+
+ parent_fwspec.fwnode = domain->parent->fwnode;
+ parent_fwspec.param_count = 3;
+ parent_fwspec.param[0] = 0;
+ parent_fwspec.param[1] = parent_hwirq;
+ parent_fwspec.param[2] = type;
+
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+ &parent_fwspec);
+}
+
+static int qcom_pdc_gpio_domain_select(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token)
+{
+ return (bus_token == DOMAIN_BUS_WAKEUP);
+}
+
+static const struct irq_domain_ops qcom_pdc_gpio_ops = {
+ .select = qcom_pdc_gpio_domain_select,
+ .alloc = qcom_pdc_gpio_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
static int pdc_setup_pin_mapping(struct device_node *np)
{
int ret, n;
@@ -270,7 +324,7 @@ static int pdc_setup_pin_mapping(struct device_node *np)
static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
{
- struct irq_domain *parent_domain, *pdc_domain;
+ struct irq_domain *parent_domain, *pdc_domain, *pdc_gpio_domain;
int ret;
pdc_base = of_iomap(node, 0);
@@ -301,6 +355,18 @@ static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
goto fail;
}
+ pdc_gpio_domain = irq_domain_create_hierarchy(parent_domain, 0,
+ PDC_MAX_GPIO_IRQS,
+ of_fwnode_handle(node),
+ &qcom_pdc_gpio_ops, NULL);
+ if (!pdc_gpio_domain) {
+ pr_err("%pOF: GIC domain add failed for GPIO domain\n", node);
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ irq_domain_update_bus_token(pdc_gpio_domain, DOMAIN_BUS_WAKEUP);
+
return 0;
fail:
diff --git a/include/linux/soc/qcom/irq.h b/include/linux/soc/qcom/irq.h
new file mode 100644
index 000000000000..bacc9edbce0d
--- /dev/null
+++ b/include/linux/soc/qcom/irq.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __QCOM_IRQ_H
+#define __QCOM_IRQ_H
+
+#include <linux/irqdomain.h>
+
+/**
+ * struct qcom_irq_fwspec - qcom specific irq fwspec wrapper
+ * @fwspec: irq fwspec
+ * @mask: if true, keep the irq masked in the gpio controller
+ *
+ * Use this structure to communicate between the parent irq chip, MPM or PDC,
+ * to the gpio chip, TLMM, about the gpio being allocated in the parent
+ * and if the gpio chip should keep the line masked because the parent irq
+ * chip is handling everything about the irq line.
+ */
+struct qcom_irq_fwspec {
+ struct irq_fwspec fwspec;
+ bool mask;
+};
+
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-03-13 21:19 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-13 21:18 [PATCH v4 00/10] support wakeup capable GPIOs Lina Iyer
2019-03-13 21:18 ` [PATCH v4 01/10] gpio: Add support for hierarchical IRQ domains Lina Iyer
2019-03-13 21:18 ` [PATCH v4 02/10] irqdomain: add bus token DOMAIN_BUS_WAKEUP Lina Iyer
2019-03-13 21:18 ` [PATCH v4 03/10] of/irq: document properties for wakeup interrupt parent Lina Iyer
2019-03-18 17:42 ` Marc Zyngier
2019-04-04 15:58 ` Lina Iyer
2019-04-15 12:42 ` Marc Zyngier
2019-04-15 21:11 ` Lina Iyer
2019-04-16 16:54 ` Stephen Boyd
2019-04-16 17:42 ` Lina Iyer
2019-04-17 14:36 ` Linus Walleij
2019-03-13 21:18 ` [PATCH v4 04/10] of: irq: add helper to remap interrupts to another irqdomain Lina Iyer
2019-03-22 17:43 ` Lina Iyer
2019-03-13 21:18 ` Lina Iyer [this message]
2019-03-13 21:18 ` [PATCH v4 06/10] dt-bindings: sdm845-pinctrl: add wakeup interrupt parent for GPIO Lina Iyer
2019-03-15 23:37 ` Rob Herring
2019-03-18 15:37 ` Lina Iyer
2019-03-13 21:18 ` [PATCH v4 07/10] drivers: pinctrl: msm: setup GPIO irqchip hierarchy Lina Iyer
2019-03-15 16:28 ` Stephen Boyd
2019-03-16 11:39 ` Marc Zyngier
2019-03-21 21:54 ` Stephen Boyd
2019-04-16 21:26 ` Lina Iyer
2019-04-17 13:58 ` Linus Walleij
2019-04-22 22:58 ` Lina Iyer
2019-04-17 16:08 ` Lina Iyer
2019-04-17 17:38 ` Linus Walleij
2019-03-13 21:18 ` [PATCH v4 08/10] arm64: dts: qcom: add PDC interrupt controller for SDM845 Lina Iyer
2019-03-13 21:18 ` [PATCH v4 09/10] arm64: dts: qcom: setup PDC as wakeup parent for GPIOs " Lina Iyer
2019-03-13 21:18 ` [PATCH v4 10/10] arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845 Lina Iyer
2019-04-15 12:43 ` [PATCH v4 00/10] support wakeup capable GPIOs Marc Zyngier
2019-04-15 15:56 ` Lina Iyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190313211844.29416-6-ilina@codeaurora.org \
--to=ilina@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=rplsssn@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).