* [PATCH] tty: atmel_serial: fix a NULL pointer dereference
@ 2019-03-14 7:17 Kangjie Lu
2019-03-14 8:25 ` Richard Genoud
0 siblings, 1 reply; 5+ messages in thread
From: Kangjie Lu @ 2019-03-14 7:17 UTC (permalink / raw)
To: kjlu
Cc: pakki001, Richard Genoud, Greg Kroah-Hartman, Jiri Slaby,
Nicolas Ferre, Alexandre Belloni, Ludovic Desroches,
linux-serial, linux-arm-kernel, linux-kernel
In case dmaengine_prep_dma_cyclic fails, the fix return a proper
error code to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
---
drivers/tty/serial/atmel_serial.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 05147fe24343..cf560d05008c 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1237,8 +1237,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
dma_cap_set(DMA_CYCLIC, mask);
atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx");
- if (atmel_port->chan_rx == NULL)
+ if (atmel_port->chan_rx == NULL) {
+ ret = -EINVAL;
goto chan_err;
+ }
dev_info(port->dev, "using %s for rx DMA transfers\n",
dma_chan_name(atmel_port->chan_rx));
@@ -1257,6 +1259,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
if (!nent) {
dev_dbg(port->dev, "need to release resource of dma\n");
+ ret = -EINVAL;
goto chan_err;
} else {
dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
@@ -1288,6 +1291,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
sg_dma_len(&atmel_port->sg_rx)/2,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
+ if (!desc) {
+ dev_err(port->dev, "Preparing DMA cyclic failed\n");
+ ret = -ENOMEM;
+ goto chan_err;
+ }
desc->callback = atmel_complete_rx_dma;
desc->callback_param = port;
atmel_port->desc_rx = desc;
@@ -1300,7 +1308,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
atmel_port->use_dma_rx = 0;
if (atmel_port->chan_rx)
atmel_release_rx_dma(port);
- return -EINVAL;
+ return ret;
}
static void atmel_uart_timer_callback(struct timer_list *t)
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] tty: atmel_serial: fix a NULL pointer dereference
2019-03-14 7:17 [PATCH] tty: atmel_serial: fix a NULL pointer dereference Kangjie Lu
@ 2019-03-14 8:25 ` Richard Genoud
2019-03-15 7:21 ` [PATCH v2] " Kangjie Lu
0 siblings, 1 reply; 5+ messages in thread
From: Richard Genoud @ 2019-03-14 8:25 UTC (permalink / raw)
To: Kangjie Lu
Cc: pakki001, Greg Kroah-Hartman, Jiri Slaby, Nicolas Ferre,
Alexandre Belloni, Ludovic Desroches, linux-serial,
linux-arm-kernel, linux-kernel
Hi,
Good catch !
Le 14/03/2019 à 08:17, Kangjie Lu a écrit :
> In case dmaengine_prep_dma_cyclic fails, the fix return a proper
> error code to avoid NULL pointer dereference.
>
you could add:
Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
So that -stable branches get this.
> Signed-off-by: Kangjie Lu <kjlu@umn.edu>
> ---
> drivers/tty/serial/atmel_serial.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 05147fe24343..cf560d05008c 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -1237,8 +1237,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
> dma_cap_set(DMA_CYCLIC, mask);
>
> atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx");
> - if (atmel_port->chan_rx == NULL)
> + if (atmel_port->chan_rx == NULL) {
> + ret = -EINVAL;
> goto chan_err;
> + }
> dev_info(port->dev, "using %s for rx DMA transfers\n",
> dma_chan_name(atmel_port->chan_rx));
>
> @@ -1257,6 +1259,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
>
> if (!nent) {
> dev_dbg(port->dev, "need to release resource of dma\n");
> + ret = -EINVAL;
> goto chan_err;
> } else {
> dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
> @@ -1288,6 +1291,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
> sg_dma_len(&atmel_port->sg_rx)/2,
> DMA_DEV_TO_MEM,
> DMA_PREP_INTERRUPT);
> + if (!desc) {
> + dev_err(port->dev, "Preparing DMA cyclic failed\n");
> + ret = -ENOMEM;
IMHO, we don't really know why dmaengine_prep_dma_cyclic() failed, it
could be because it's already in use, or bad value, or...
(and anyway, we just check if the return value is < 0 in atmel _startup.)
Is there a specific reason you choose -ENOMEM ?
If not, maybe keeping this patch smaller with a simple dev_err()+goto
here would be a better choice.
> + goto chan_err;
> + }
> desc->callback = atmel_complete_rx_dma;
> desc->callback_param = port;
> atmel_port->desc_rx = desc;
> @@ -1300,7 +1308,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
> atmel_port->use_dma_rx = 0;
> if (atmel_port->chan_rx)
> atmel_release_rx_dma(port);
> - return -EINVAL;
> + return ret;
> }
>
> static void atmel_uart_timer_callback(struct timer_list *t)
>
Thanks !
Richard.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2] tty: atmel_serial: fix a NULL pointer dereference
2019-03-14 8:25 ` Richard Genoud
@ 2019-03-15 7:21 ` Kangjie Lu
0 siblings, 0 replies; 5+ messages in thread
From: Kangjie Lu @ 2019-03-15 7:21 UTC (permalink / raw)
To: kjlu
Cc: pakki001, Richard Genoud, Greg Kroah-Hartman, Jiri Slaby,
Nicolas Ferre, Alexandre Belloni, Ludovic Desroches,
linux-serial, linux-arm-kernel, linux-kernel
Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
In case dmaengine_prep_dma_cyclic fails, the fix returns a proper
error code to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
---
V2: simplified the patch as suggested by
Richard Genoud <richard.genoud@gmail.com>
---
drivers/tty/serial/atmel_serial.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 05147fe24343..41b728d223d1 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1288,6 +1288,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
sg_dma_len(&atmel_port->sg_rx)/2,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
+ if (!desc) {
+ dev_err(port->dev, "Preparing DMA cyclic failed\n");
+ goto chan_err;
+ }
desc->callback = atmel_complete_rx_dma;
desc->callback_param = port;
atmel_port->desc_rx = desc;
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] tty: atmel_serial: fix a NULL pointer dereference
@ 2019-03-15 8:22 Richard Genoud
2019-03-15 17:16 ` [PATCH] " Kangjie Lu
0 siblings, 1 reply; 5+ messages in thread
From: Richard Genoud @ 2019-03-15 8:22 UTC (permalink / raw)
To: Kangjie Lu
Cc: Greg Kroah-Hartman, Jiri Slaby, Nicolas Ferre, Alexandre Belloni,
Ludovic Desroches, linux-serial, linux-arm-kernel, linux-kernel
Le 15/03/2019 à 08:27, Kangjie Lu a écrit :
> Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
The Fixes: tag should be just bellow the Signenf-off-by: tag
>
> In case dmaengine_prep_dma_cyclic fails, the fix returns a proper
> error code to avoid NULL pointer dereference.
>
> Signed-off-by: Kangjie Lu <kjlu@umn.edu>
^^^
here
>
> ---
> V2: simplified the patch as suggested by
> Richard Genoud <richard.genoud@gmail.com>
> ---
> drivers/tty/serial/atmel_serial.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 05147fe24343..41b728d223d1 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -1288,6 +1288,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
> sg_dma_len(&atmel_port->sg_rx)/2,
> DMA_DEV_TO_MEM,
> DMA_PREP_INTERRUPT);
> + if (!desc) {
> + dev_err(port->dev, "Preparing DMA cyclic failed\n");
> + goto chan_err;
> + }
> desc->callback = atmel_complete_rx_dma;
> desc->callback_param = port;
> atmel_port->desc_rx = desc;
>
Thanks !
Richard.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] tty: atmel_serial: fix a NULL pointer dereference
2019-03-15 8:22 Richard Genoud
@ 2019-03-15 17:16 ` Kangjie Lu
2019-03-18 7:28 ` Richard Genoud
0 siblings, 1 reply; 5+ messages in thread
From: Kangjie Lu @ 2019-03-15 17:16 UTC (permalink / raw)
To: kjlu
Cc: pakki001, Richard Genoud, Greg Kroah-Hartman, Jiri Slaby,
Nicolas Ferre, Alexandre Belloni, Ludovic Desroches,
linux-serial, linux-arm-kernel, linux-kernel
In case dmaengine_prep_dma_cyclic fails, the fix returns a proper
error code to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
---
V2: simplified the patch as suggested by
Richard Genoud <richard.genoud@gmail.com>
---
drivers/tty/serial/atmel_serial.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 05147fe24343..41b728d223d1 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1288,6 +1288,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
sg_dma_len(&atmel_port->sg_rx)/2,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
+ if (!desc) {
+ dev_err(port->dev, "Preparing DMA cyclic failed\n");
+ goto chan_err;
+ }
desc->callback = atmel_complete_rx_dma;
desc->callback_param = port;
atmel_port->desc_rx = desc;
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] tty: atmel_serial: fix a NULL pointer dereference
2019-03-15 17:16 ` [PATCH] " Kangjie Lu
@ 2019-03-18 7:28 ` Richard Genoud
0 siblings, 0 replies; 5+ messages in thread
From: Richard Genoud @ 2019-03-18 7:28 UTC (permalink / raw)
To: Kangjie Lu
Cc: pakki001, Greg Kroah-Hartman, Jiri Slaby, Nicolas Ferre,
Alexandre Belloni, Ludovic Desroches, linux-serial,
linux-arm-kernel, linux-kernel
Le 15/03/2019 à 18:16, Kangjie Lu a écrit :
> In case dmaengine_prep_dma_cyclic fails, the fix returns a proper
> error code to avoid NULL pointer dereference.
>
> Signed-off-by: Kangjie Lu <kjlu@umn.edu>
> Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
Acked-by: Richard Genoud <richard.genoud@gmail.com>
>
> ---
> V2: simplified the patch as suggested by
> Richard Genoud <richard.genoud@gmail.com>
> ---
> drivers/tty/serial/atmel_serial.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 05147fe24343..41b728d223d1 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -1288,6 +1288,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
> sg_dma_len(&atmel_port->sg_rx)/2,
> DMA_DEV_TO_MEM,
> DMA_PREP_INTERRUPT);
> + if (!desc) {
> + dev_err(port->dev, "Preparing DMA cyclic failed\n");
> + goto chan_err;
> + }
> desc->callback = atmel_complete_rx_dma;
> desc->callback_param = port;
> atmel_port->desc_rx = desc;
>
Thanks !
Richard
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-03-18 7:28 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-14 7:17 [PATCH] tty: atmel_serial: fix a NULL pointer dereference Kangjie Lu
2019-03-14 8:25 ` Richard Genoud
2019-03-15 7:21 ` [PATCH v2] " Kangjie Lu
2019-03-15 8:22 Richard Genoud
2019-03-15 17:16 ` [PATCH] " Kangjie Lu
2019-03-18 7:28 ` Richard Genoud
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).