From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>
Cc: <ulf.hansson@linaro.org>, <adrian.hunter@intel.com>, <faiz_abbas@ti.com>
Subject: [PATCH 1/2] mmc: sdhci: Add Quirk for enabling HISPD under special conditions
Date: Fri, 29 Mar 2019 19:52:01 +0530 [thread overview]
Message-ID: <20190329142202.15000-2-faiz_abbas@ti.com> (raw)
In-Reply-To: <20190329142202.15000-1-faiz_abbas@ti.com>
Some controllers on TI devices requires the HISPD bit to be cleared
even in some high speed modes. Add a quirk that facilitates this
requirement.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
drivers/mmc/host/sdhci.c | 36 ++++++++++++++++++++++++------------
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 26 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a8141ff9be03..ed4ed6054ddf 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1916,18 +1916,30 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if (!(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)) {
- if (ios->timing == MMC_TIMING_SD_HS ||
- ios->timing == MMC_TIMING_MMC_HS ||
- ios->timing == MMC_TIMING_MMC_HS400 ||
- ios->timing == MMC_TIMING_MMC_HS200 ||
- ios->timing == MMC_TIMING_MMC_DDR52 ||
- ios->timing == MMC_TIMING_UHS_SDR50 ||
- ios->timing == MMC_TIMING_UHS_SDR104 ||
- ios->timing == MMC_TIMING_UHS_DDR50 ||
- ios->timing == MMC_TIMING_UHS_SDR25)
- ctrl |= SDHCI_CTRL_HISPD;
- else
- ctrl &= ~SDHCI_CTRL_HISPD;
+ if ((host->quirks2 & SDHCI_QUIRK2_TI_HISPD_BIT)) {
+ if (ios->timing == MMC_TIMING_MMC_HS400 ||
+ ios->timing == MMC_TIMING_MMC_HS200 ||
+ ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_UHS_SDR50 ||
+ ios->timing == MMC_TIMING_UHS_SDR104 ||
+ ios->timing == MMC_TIMING_UHS_DDR50)
+ ctrl |= SDHCI_CTRL_HISPD;
+ else
+ ctrl &= ~SDHCI_CTRL_HISPD;
+ } else {
+ if (ios->timing == MMC_TIMING_SD_HS ||
+ ios->timing == MMC_TIMING_MMC_HS ||
+ ios->timing == MMC_TIMING_MMC_HS400 ||
+ ios->timing == MMC_TIMING_MMC_HS200 ||
+ ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_UHS_SDR50 ||
+ ios->timing == MMC_TIMING_UHS_SDR104 ||
+ ios->timing == MMC_TIMING_UHS_DDR50 ||
+ ios->timing == MMC_TIMING_UHS_SDR25)
+ ctrl |= SDHCI_CTRL_HISPD;
+ else
+ ctrl &= ~SDHCI_CTRL_HISPD;
+ }
}
if (host->version >= SDHCI_SPEC_300) {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 01002cba1359..aac026c5e184 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -485,6 +485,8 @@ struct sdhci_host {
* block count.
*/
#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
+/* Some TI devices need the high speed bit disabled even in high speed modes */
+#define SDHCI_QUIRK2_TI_HISPD_BIT (1<<19)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.19.2
next prev parent reply other threads:[~2019-03-29 14:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-29 14:22 [PATCH 0/2] Add QUIRK for special HISPD bit in am65x-evm Faiz Abbas
2019-03-29 14:22 ` Faiz Abbas [this message]
2019-04-01 8:51 ` [PATCH 1/2] mmc: sdhci: Add Quirk for enabling HISPD under special conditions Adrian Hunter
2019-04-01 9:01 ` Faiz Abbas
2019-04-01 9:12 ` Adrian Hunter
2019-04-01 10:44 ` Faiz Abbas
2019-03-29 14:22 ` [PATCH 2/2] mmc: sdhci_am654: Add QUIRK2_TI_HISPD_BIT Faiz Abbas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190329142202.15000-2-faiz_abbas@ti.com \
--to=faiz_abbas@ti.com \
--cc=adrian.hunter@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).