* Re: [PATCH v2] drm: prefix header search paths with $(srctree)/
2019-03-29 11:32 [PATCH v2] drm: prefix header search paths with $(srctree)/ Masahiro Yamada
@ 2019-03-29 12:01 ` james qian wang (Arm Technology China)
2019-03-29 14:24 ` Liviu Dudau
2019-04-26 1:36 ` Masahiro Yamada
2 siblings, 0 replies; 8+ messages in thread
From: james qian wang (Arm Technology China) @ 2019-03-29 12:01 UTC (permalink / raw)
To: Masahiro Yamada
Cc: David Airlie, Daniel Vetter, dri-devel, Sam Ravnborg, Sean Paul,
Zhenyu Wang, nouveau, Jani Nikula, Alex Deucher,
David (ChunMing) Zhou, amd-gfx, Rob Clark, Christian König,
Zhi Wang, Rodrigo Vivi, linux-arm-msm, intel-gfx, Ben Skeggs,
Brian Starkey, intel-gvt-dev, Liviu Dudau, linux-kernel,
Joonas Lahtinen, freedreno, nd
On Fri, Mar 29, 2019 at 08:32:41PM +0900, Masahiro Yamada wrote:
> Currently, the Kbuild core manipulates header search paths in a crazy
> way [1].
>
> To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
> the search paths in the srctree. Some Makefiles are already written in
> that way, but not all. The goal of this work is to make the notation
> consistent, and finally get rid of the gross hacks.
>
> Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
> ("kbuild: do not drop -I without parameter").
>
> [1]: https://patchwork.kernel.org/patch/9632347/
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>
> I put all gpu/drm changes into a single patch because
> they are trivial conversion.
>
> If you are interested in the big picture of this work,
> the full patch set is available at the following URL.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git build-test
>
>
> Changes in v2:
> - fix up the new driver komeda
> - Add Sam's Reviewed-by
>
> drivers/gpu/drm/amd/amdgpu/Makefile | 2 +-
> drivers/gpu/drm/amd/lib/Makefile | 2 +-
> drivers/gpu/drm/arm/display/komeda/Makefile | 4 ++--
> drivers/gpu/drm/i915/gvt/Makefile | 2 +-
> drivers/gpu/drm/msm/Makefile | 6 +++---
> drivers/gpu/drm/nouveau/Kbuild | 8 ++++----
> 6 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
> index 466da59..62bf9da 100644
> --- a/drivers/gpu/drm/amd/amdgpu/Makefile
> +++ b/drivers/gpu/drm/amd/amdgpu/Makefile
> @@ -23,7 +23,7 @@
> # Makefile for the drm device driver. This driver provides support for the
> # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
>
> -FULL_AMD_PATH=$(src)/..
> +FULL_AMD_PATH=$(srctree)/$(src)/..
> DISPLAY_FOLDER_NAME=display
> FULL_AMD_DISPLAY_PATH = $(FULL_AMD_PATH)/$(DISPLAY_FOLDER_NAME)
>
> diff --git a/drivers/gpu/drm/amd/lib/Makefile b/drivers/gpu/drm/amd/lib/Makefile
> index 6902430..d534992 100644
> --- a/drivers/gpu/drm/amd/lib/Makefile
> +++ b/drivers/gpu/drm/amd/lib/Makefile
> @@ -27,6 +27,6 @@
> # driver components or later moved to kernel/lib for sharing with
> # other drivers.
>
> -ccflags-y := -I$(src)/../include
> +ccflags-y := -I $(srctree)/$(src)/../include
>
> obj-$(CONFIG_CHASH) += chash.o
> diff --git a/drivers/gpu/drm/arm/display/komeda/Makefile b/drivers/gpu/drm/arm/display/komeda/Makefile
> index 1b875e5..a72e30c 100644
> --- a/drivers/gpu/drm/arm/display/komeda/Makefile
> +++ b/drivers/gpu/drm/arm/display/komeda/Makefile
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: GPL-2.0
>
> ccflags-y := \
> - -I$(src)/../include \
> - -I$(src)
> + -I $(srctree)/$(src)/../include \
> + -I $(srctree)/$(src)
>
> komeda-y := \
> komeda_drv.o \
> diff --git a/drivers/gpu/drm/i915/gvt/Makefile b/drivers/gpu/drm/i915/gvt/Makefile
> index 271fb46..ea8324a 100644
> --- a/drivers/gpu/drm/i915/gvt/Makefile
> +++ b/drivers/gpu/drm/i915/gvt/Makefile
> @@ -5,5 +5,5 @@ GVT_SOURCE := gvt.o aperture_gm.o handlers.o vgpu.o trace_points.o firmware.o \
> execlist.o scheduler.o sched_policy.o mmio_context.o cmd_parser.o debugfs.o \
> fb_decoder.o dmabuf.o page_track.o
>
> -ccflags-y += -I$(src) -I$(src)/$(GVT_DIR)
> +ccflags-y += -I $(srctree)/$(src) -I $(srctree)/$(src)/$(GVT_DIR)/
> i915-y += $(addprefix $(GVT_DIR)/, $(GVT_SOURCE))
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 56a70c7..b7b1ebd 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> -ccflags-y := -Idrivers/gpu/drm/msm
> -ccflags-y += -Idrivers/gpu/drm/msm/disp/dpu1
> -ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
> +ccflags-y := -I $(srctree)/$(src)
> +ccflags-y += -I $(srctree)/$(src)/disp/dpu1
> +ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
>
> msm-y := \
> adreno/adreno_device.o \
> diff --git a/drivers/gpu/drm/nouveau/Kbuild b/drivers/gpu/drm/nouveau/Kbuild
> index ea3035e..4fae728 100644
> --- a/drivers/gpu/drm/nouveau/Kbuild
> +++ b/drivers/gpu/drm/nouveau/Kbuild
> @@ -1,7 +1,7 @@
> -ccflags-y += -I$(src)/include
> -ccflags-y += -I$(src)/include/nvkm
> -ccflags-y += -I$(src)/nvkm
> -ccflags-y += -I$(src)
> +ccflags-y += -I $(srctree)/$(src)/include
> +ccflags-y += -I $(srctree)/$(src)/include/nvkm
> +ccflags-y += -I $(srctree)/$(src)/nvkm
> +ccflags-y += -I $(srctree)/$(src)
>
> # NVKM - HW resource manager
> #- code also used by various userspace tools/tests
> --
> 2.7.4
--
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] drm: prefix header search paths with $(srctree)/
2019-03-29 11:32 [PATCH v2] drm: prefix header search paths with $(srctree)/ Masahiro Yamada
2019-03-29 12:01 ` james qian wang (Arm Technology China)
@ 2019-03-29 14:24 ` Liviu Dudau
2019-04-26 1:36 ` Masahiro Yamada
2 siblings, 0 replies; 8+ messages in thread
From: Liviu Dudau @ 2019-03-29 14:24 UTC (permalink / raw)
To: Masahiro Yamada
Cc: David Airlie, Daniel Vetter, dri-devel, Sam Ravnborg, Sean Paul,
Zhenyu Wang, nouveau, Jani Nikula, James (Qian) Wang,
Alex Deucher, David (ChunMing) Zhou, amd-gfx, Rob Clark,
Christian König, Zhi Wang, Rodrigo Vivi, linux-arm-msm,
intel-gfx, Ben Skeggs, Brian Starkey, intel-gvt-dev,
linux-kernel, Joonas Lahtinen, freedreno
On Fri, Mar 29, 2019 at 08:32:41PM +0900, Masahiro Yamada wrote:
> Currently, the Kbuild core manipulates header search paths in a crazy
> way [1].
>
> To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
> the search paths in the srctree. Some Makefiles are already written in
> that way, but not all. The goal of this work is to make the notation
> consistent, and finally get rid of the gross hacks.
>
> Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
> ("kbuild: do not drop -I without parameter").
>
> [1]: https://patchwork.kernel.org/patch/9632347/
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>
> I put all gpu/drm changes into a single patch because
> they are trivial conversion.
>
> If you are interested in the big picture of this work,
> the full patch set is available at the following URL.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git build-test
>
>
> Changes in v2:
> - fix up the new driver komeda
> - Add Sam's Reviewed-by
>
> drivers/gpu/drm/amd/amdgpu/Makefile | 2 +-
> drivers/gpu/drm/amd/lib/Makefile | 2 +-
> drivers/gpu/drm/arm/display/komeda/Makefile | 4 ++--
> drivers/gpu/drm/i915/gvt/Makefile | 2 +-
> drivers/gpu/drm/msm/Makefile | 6 +++---
> drivers/gpu/drm/nouveau/Kbuild | 8 ++++----
> 6 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
> index 466da59..62bf9da 100644
> --- a/drivers/gpu/drm/amd/amdgpu/Makefile
> +++ b/drivers/gpu/drm/amd/amdgpu/Makefile
> @@ -23,7 +23,7 @@
> # Makefile for the drm device driver. This driver provides support for the
> # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
>
> -FULL_AMD_PATH=$(src)/..
> +FULL_AMD_PATH=$(srctree)/$(src)/..
> DISPLAY_FOLDER_NAME=display
> FULL_AMD_DISPLAY_PATH = $(FULL_AMD_PATH)/$(DISPLAY_FOLDER_NAME)
>
> diff --git a/drivers/gpu/drm/amd/lib/Makefile b/drivers/gpu/drm/amd/lib/Makefile
> index 6902430..d534992 100644
> --- a/drivers/gpu/drm/amd/lib/Makefile
> +++ b/drivers/gpu/drm/amd/lib/Makefile
> @@ -27,6 +27,6 @@
> # driver components or later moved to kernel/lib for sharing with
> # other drivers.
>
> -ccflags-y := -I$(src)/../include
> +ccflags-y := -I $(srctree)/$(src)/../include
>
> obj-$(CONFIG_CHASH) += chash.o
> diff --git a/drivers/gpu/drm/arm/display/komeda/Makefile b/drivers/gpu/drm/arm/display/komeda/Makefile
> index 1b875e5..a72e30c 100644
> --- a/drivers/gpu/drm/arm/display/komeda/Makefile
> +++ b/drivers/gpu/drm/arm/display/komeda/Makefile
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: GPL-2.0
>
> ccflags-y := \
> - -I$(src)/../include \
> - -I$(src)
> + -I $(srctree)/$(src)/../include \
> + -I $(srctree)/$(src)
>
> komeda-y := \
> komeda_drv.o \
For komeda:
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
I'm assuming the series in going to be merged into one go, so I don't
have to take the individual patch in my tree, but if I'm wrong please
let me know.
Best regards,
Liviu
> diff --git a/drivers/gpu/drm/i915/gvt/Makefile b/drivers/gpu/drm/i915/gvt/Makefile
> index 271fb46..ea8324a 100644
> --- a/drivers/gpu/drm/i915/gvt/Makefile
> +++ b/drivers/gpu/drm/i915/gvt/Makefile
> @@ -5,5 +5,5 @@ GVT_SOURCE := gvt.o aperture_gm.o handlers.o vgpu.o trace_points.o firmware.o \
> execlist.o scheduler.o sched_policy.o mmio_context.o cmd_parser.o debugfs.o \
> fb_decoder.o dmabuf.o page_track.o
>
> -ccflags-y += -I$(src) -I$(src)/$(GVT_DIR)
> +ccflags-y += -I $(srctree)/$(src) -I $(srctree)/$(src)/$(GVT_DIR)/
> i915-y += $(addprefix $(GVT_DIR)/, $(GVT_SOURCE))
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 56a70c7..b7b1ebd 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> -ccflags-y := -Idrivers/gpu/drm/msm
> -ccflags-y += -Idrivers/gpu/drm/msm/disp/dpu1
> -ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
> +ccflags-y := -I $(srctree)/$(src)
> +ccflags-y += -I $(srctree)/$(src)/disp/dpu1
> +ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
>
> msm-y := \
> adreno/adreno_device.o \
> diff --git a/drivers/gpu/drm/nouveau/Kbuild b/drivers/gpu/drm/nouveau/Kbuild
> index ea3035e..4fae728 100644
> --- a/drivers/gpu/drm/nouveau/Kbuild
> +++ b/drivers/gpu/drm/nouveau/Kbuild
> @@ -1,7 +1,7 @@
> -ccflags-y += -I$(src)/include
> -ccflags-y += -I$(src)/include/nvkm
> -ccflags-y += -I$(src)/nvkm
> -ccflags-y += -I$(src)
> +ccflags-y += -I $(srctree)/$(src)/include
> +ccflags-y += -I $(srctree)/$(src)/include/nvkm
> +ccflags-y += -I $(srctree)/$(src)/nvkm
> +ccflags-y += -I $(srctree)/$(src)
>
> # NVKM - HW resource manager
> #- code also used by various userspace tools/tests
> --
> 2.7.4
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] drm: prefix header search paths with $(srctree)/
2019-03-29 11:32 [PATCH v2] drm: prefix header search paths with $(srctree)/ Masahiro Yamada
2019-03-29 12:01 ` james qian wang (Arm Technology China)
2019-03-29 14:24 ` Liviu Dudau
@ 2019-04-26 1:36 ` Masahiro Yamada
2019-04-26 2:18 ` [Intel-gfx] " Dave Airlie
2 siblings, 1 reply; 8+ messages in thread
From: Masahiro Yamada @ 2019-04-26 1:36 UTC (permalink / raw)
To: David Airlie, Daniel Vetter, dri-devel
Cc: Sam Ravnborg, Sean Paul, Zhenyu Wang, nouveau, Jani Nikula,
James (Qian) Wang, Alex Deucher, David (ChunMing) Zhou, amd-gfx,
Rob Clark, Christian König, Zhi Wang, Rodrigo Vivi,
linux-arm-msm, intel-gfx, Ben Skeggs, Brian Starkey,
intel-gvt-dev, Liviu Dudau, Linux Kernel Mailing List,
Joonas Lahtinen, freedreno
Hi.
On Fri, Mar 29, 2019 at 8:37 PM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>
> Currently, the Kbuild core manipulates header search paths in a crazy
> way [1].
>
> To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
> the search paths in the srctree. Some Makefiles are already written in
> that way, but not all. The goal of this work is to make the notation
> consistent, and finally get rid of the gross hacks.
>
> Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
> ("kbuild: do not drop -I without parameter").
>
> [1]: https://patchwork.kernel.org/patch/9632347/
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>
> I put all gpu/drm changes into a single patch because
> they are trivial conversion.
>
> If you are interested in the big picture of this work,
> the full patch set is available at the following URL.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git build-test
Is somebody taking care of this?
>
> Changes in v2:
> - fix up the new driver komeda
> - Add Sam's Reviewed-by
>
> drivers/gpu/drm/amd/amdgpu/Makefile | 2 +-
> drivers/gpu/drm/amd/lib/Makefile | 2 +-
> drivers/gpu/drm/arm/display/komeda/Makefile | 4 ++--
> drivers/gpu/drm/i915/gvt/Makefile | 2 +-
> drivers/gpu/drm/msm/Makefile | 6 +++---
> drivers/gpu/drm/nouveau/Kbuild | 8 ++++----
> 6 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
> index 466da59..62bf9da 100644
> --- a/drivers/gpu/drm/amd/amdgpu/Makefile
> +++ b/drivers/gpu/drm/amd/amdgpu/Makefile
> @@ -23,7 +23,7 @@
> # Makefile for the drm device driver. This driver provides support for the
> # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
>
> -FULL_AMD_PATH=$(src)/..
> +FULL_AMD_PATH=$(srctree)/$(src)/..
> DISPLAY_FOLDER_NAME=display
> FULL_AMD_DISPLAY_PATH = $(FULL_AMD_PATH)/$(DISPLAY_FOLDER_NAME)
>
> diff --git a/drivers/gpu/drm/amd/lib/Makefile b/drivers/gpu/drm/amd/lib/Makefile
> index 6902430..d534992 100644
> --- a/drivers/gpu/drm/amd/lib/Makefile
> +++ b/drivers/gpu/drm/amd/lib/Makefile
> @@ -27,6 +27,6 @@
> # driver components or later moved to kernel/lib for sharing with
> # other drivers.
>
> -ccflags-y := -I$(src)/../include
> +ccflags-y := -I $(srctree)/$(src)/../include
>
> obj-$(CONFIG_CHASH) += chash.o
> diff --git a/drivers/gpu/drm/arm/display/komeda/Makefile b/drivers/gpu/drm/arm/display/komeda/Makefile
> index 1b875e5..a72e30c 100644
> --- a/drivers/gpu/drm/arm/display/komeda/Makefile
> +++ b/drivers/gpu/drm/arm/display/komeda/Makefile
> @@ -1,8 +1,8 @@
> # SPDX-License-Identifier: GPL-2.0
>
> ccflags-y := \
> - -I$(src)/../include \
> - -I$(src)
> + -I $(srctree)/$(src)/../include \
> + -I $(srctree)/$(src)
>
> komeda-y := \
> komeda_drv.o \
> diff --git a/drivers/gpu/drm/i915/gvt/Makefile b/drivers/gpu/drm/i915/gvt/Makefile
> index 271fb46..ea8324a 100644
> --- a/drivers/gpu/drm/i915/gvt/Makefile
> +++ b/drivers/gpu/drm/i915/gvt/Makefile
> @@ -5,5 +5,5 @@ GVT_SOURCE := gvt.o aperture_gm.o handlers.o vgpu.o trace_points.o firmware.o \
> execlist.o scheduler.o sched_policy.o mmio_context.o cmd_parser.o debugfs.o \
> fb_decoder.o dmabuf.o page_track.o
>
> -ccflags-y += -I$(src) -I$(src)/$(GVT_DIR)
> +ccflags-y += -I $(srctree)/$(src) -I $(srctree)/$(src)/$(GVT_DIR)/
> i915-y += $(addprefix $(GVT_DIR)/, $(GVT_SOURCE))
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 56a70c7..b7b1ebd 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> -ccflags-y := -Idrivers/gpu/drm/msm
> -ccflags-y += -Idrivers/gpu/drm/msm/disp/dpu1
> -ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
> +ccflags-y := -I $(srctree)/$(src)
> +ccflags-y += -I $(srctree)/$(src)/disp/dpu1
> +ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi
>
> msm-y := \
> adreno/adreno_device.o \
> diff --git a/drivers/gpu/drm/nouveau/Kbuild b/drivers/gpu/drm/nouveau/Kbuild
> index ea3035e..4fae728 100644
> --- a/drivers/gpu/drm/nouveau/Kbuild
> +++ b/drivers/gpu/drm/nouveau/Kbuild
> @@ -1,7 +1,7 @@
> -ccflags-y += -I$(src)/include
> -ccflags-y += -I$(src)/include/nvkm
> -ccflags-y += -I$(src)/nvkm
> -ccflags-y += -I$(src)
> +ccflags-y += -I $(srctree)/$(src)/include
> +ccflags-y += -I $(srctree)/$(src)/include/nvkm
> +ccflags-y += -I $(srctree)/$(src)/nvkm
> +ccflags-y += -I $(srctree)/$(src)
>
> # NVKM - HW resource manager
> #- code also used by various userspace tools/tests
> --
> 2.7.4
>
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Intel-gfx] [PATCH v2] drm: prefix header search paths with $(srctree)/
2019-04-26 1:36 ` Masahiro Yamada
@ 2019-04-26 2:18 ` Dave Airlie
2019-04-26 2:25 ` yamada.masahiro
0 siblings, 1 reply; 8+ messages in thread
From: Dave Airlie @ 2019-04-26 2:18 UTC (permalink / raw)
To: Masahiro Yamada
Cc: David Airlie, Daniel Vetter, dri-devel, nouveau, Sam Ravnborg,
David (ChunMing) Zhou, amd-gfx mailing list, James (Qian) Wang,
Ben Skeggs, linux-arm-msm, Intel Graphics Development,
intel-gvt-dev, Linux Kernel Mailing List, Christian König,
Alex Deucher, freedreno
On Fri, 26 Apr 2019 at 11:46, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>
> Hi.
>
>
> On Fri, Mar 29, 2019 at 8:37 PM Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> >
> > Currently, the Kbuild core manipulates header search paths in a crazy
> > way [1].
> >
> > To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
> > the search paths in the srctree. Some Makefiles are already written in
> > that way, but not all. The goal of this work is to make the notation
> > consistent, and finally get rid of the gross hacks.
> >
> > Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
> > ("kbuild: do not drop -I without parameter").
> >
> > [1]: https://patchwork.kernel.org/patch/9632347/
> >
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> > ---
> >
> > I put all gpu/drm changes into a single patch because
> > they are trivial conversion.
> >
> > If you are interested in the big picture of this work,
> > the full patch set is available at the following URL.
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git build-test
>
>
> Is somebody taking care of this?
>
Are you expecting this to be merged in the drm tree? if so please
indicate that when posting.
I'd assumed this would go via kbuild tree.
If the later,
Acked-by: Dave Airlie <airlied@redhat.com>
Dave.
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [Intel-gfx] [PATCH v2] drm: prefix header search paths with $(srctree)/
2019-04-26 2:18 ` [Intel-gfx] " Dave Airlie
@ 2019-04-26 2:25 ` yamada.masahiro
2019-04-26 2:56 ` Dave Airlie
0 siblings, 1 reply; 8+ messages in thread
From: yamada.masahiro @ 2019-04-26 2:25 UTC (permalink / raw)
To: airlied
Cc: airlied, daniel, dri-devel, nouveau, sam, David1.Zhou, amd-gfx,
james.qian.wang, bskeggs, linux-arm-msm, intel-gfx,
intel-gvt-dev, linux-kernel, christian.koenig, alexander.deucher,
freedreno
Hi Dave,
> -----Original Message-----
> From: Dave Airlie [mailto:airlied@gmail.com]
> Sent: Friday, April 26, 2019 11:19 AM
> To: Yamada, Masahiro/山田 真弘 <yamada.masahiro@socionext.com>
> Cc: David Airlie <airlied@linux.ie>; Daniel Vetter <daniel@ffwll.ch>;
> dri-devel <dri-devel@lists.freedesktop.org>; nouveau
> <nouveau@lists.freedesktop.org>; Sam Ravnborg <sam@ravnborg.org>; David
> (ChunMing) Zhou <David1.Zhou@amd.com>; amd-gfx mailing list
> <amd-gfx@lists.freedesktop.org>; James (Qian) Wang
> <james.qian.wang@arm.com>; Ben Skeggs <bskeggs@redhat.com>;
> linux-arm-msm <linux-arm-msm@vger.kernel.org>; Intel Graphics
> Development <intel-gfx@lists.freedesktop.org>;
> intel-gvt-dev@lists.freedesktop.org; Linux Kernel Mailing List
> <linux-kernel@vger.kernel.org>; Christian König
> <christian.koenig@amd.com>; Alex Deucher <alexander.deucher@amd.com>;
> freedreno@lists.freedesktop.org
> Subject: Re: [Intel-gfx] [PATCH v2] drm: prefix header search paths with
> $(srctree)/
>
> On Fri, 26 Apr 2019 at 11:46, Masahiro Yamada
> <yamada.masahiro@socionext.com> wrote:
> >
> > Hi.
> >
> >
> > On Fri, Mar 29, 2019 at 8:37 PM Masahiro Yamada
> > <yamada.masahiro@socionext.com> wrote:
> > >
> > > Currently, the Kbuild core manipulates header search paths in a crazy
> > > way [1].
> > >
> > > To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
> > > the search paths in the srctree. Some Makefiles are already written
> in
> > > that way, but not all. The goal of this work is to make the notation
> > > consistent, and finally get rid of the gross hacks.
> > >
> > > Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
> > > ("kbuild: do not drop -I without parameter").
> > >
> > > [1]: https://patchwork.kernel.org/patch/9632347/
> > >
> > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> > > ---
> > >
> > > I put all gpu/drm changes into a single patch because
> > > they are trivial conversion.
> > >
> > > If you are interested in the big picture of this work,
> > > the full patch set is available at the following URL.
> > >
> > >
> git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.g
> it build-test
> >
> >
> > Is somebody taking care of this?
> >
>
> Are you expecting this to be merged in the drm tree? if so please
> indicate that when posting.
Sorry for unclearness.
Could you apply this to your drm tree?
Thanks.
> I'd assumed this would go via kbuild tree.
>
> If the later,
> Acked-by: Dave Airlie <airlied@redhat.com>
> Dave.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Intel-gfx] [PATCH v2] drm: prefix header search paths with $(srctree)/
2019-04-26 2:25 ` yamada.masahiro
@ 2019-04-26 2:56 ` Dave Airlie
2019-04-26 15:05 ` Daniel Vetter
0 siblings, 1 reply; 8+ messages in thread
From: Dave Airlie @ 2019-04-26 2:56 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Dave Airlie, Daniel Vetter, dri-devel, nouveau, Sam Ravnborg,
zhoucm1, amd-gfx mailing list, James (Qian) Wang, Ben Skeggs,
linux-arm-msm, Intel Graphics Development, intel-gvt-dev, LKML,
Koenig, Christian, Deucher, Alexander, freedreno
Daniel, drm-misc-next-fixes?
Dave.
On Fri, 26 Apr 2019 at 12:25, <yamada.masahiro@socionext.com> wrote:
>
> Hi Dave,
>
> > -----Original Message-----
> > From: Dave Airlie [mailto:airlied@gmail.com]
> > Sent: Friday, April 26, 2019 11:19 AM
> > To: Yamada, Masahiro/山田 真弘 <yamada.masahiro@socionext.com>
> > Cc: David Airlie <airlied@linux.ie>; Daniel Vetter <daniel@ffwll.ch>;
> > dri-devel <dri-devel@lists.freedesktop.org>; nouveau
> > <nouveau@lists.freedesktop.org>; Sam Ravnborg <sam@ravnborg.org>; David
> > (ChunMing) Zhou <David1.Zhou@amd.com>; amd-gfx mailing list
> > <amd-gfx@lists.freedesktop.org>; James (Qian) Wang
> > <james.qian.wang@arm.com>; Ben Skeggs <bskeggs@redhat.com>;
> > linux-arm-msm <linux-arm-msm@vger.kernel.org>; Intel Graphics
> > Development <intel-gfx@lists.freedesktop.org>;
> > intel-gvt-dev@lists.freedesktop.org; Linux Kernel Mailing List
> > <linux-kernel@vger.kernel.org>; Christian König
> > <christian.koenig@amd.com>; Alex Deucher <alexander.deucher@amd.com>;
> > freedreno@lists.freedesktop.org
> > Subject: Re: [Intel-gfx] [PATCH v2] drm: prefix header search paths with
> > $(srctree)/
> >
> > On Fri, 26 Apr 2019 at 11:46, Masahiro Yamada
> > <yamada.masahiro@socionext.com> wrote:
> > >
> > > Hi.
> > >
> > >
> > > On Fri, Mar 29, 2019 at 8:37 PM Masahiro Yamada
> > > <yamada.masahiro@socionext.com> wrote:
> > > >
> > > > Currently, the Kbuild core manipulates header search paths in a crazy
> > > > way [1].
> > > >
> > > > To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
> > > > the search paths in the srctree. Some Makefiles are already written
> > in
> > > > that way, but not all. The goal of this work is to make the notation
> > > > consistent, and finally get rid of the gross hacks.
> > > >
> > > > Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
> > > > ("kbuild: do not drop -I without parameter").
> > > >
> > > > [1]: https://patchwork.kernel.org/patch/9632347/
> > > >
> > > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > > > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> > > > ---
> > > >
> > > > I put all gpu/drm changes into a single patch because
> > > > they are trivial conversion.
> > > >
> > > > If you are interested in the big picture of this work,
> > > > the full patch set is available at the following URL.
> > > >
> > > >
> > git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.g
> > it build-test
> > >
> > >
> > > Is somebody taking care of this?
> > >
> >
> > Are you expecting this to be merged in the drm tree? if so please
> > indicate that when posting.
>
>
> Sorry for unclearness.
>
> Could you apply this to your drm tree?
>
> Thanks.
>
>
>
>
> > I'd assumed this would go via kbuild tree.
> >
> > If the later,
> > Acked-by: Dave Airlie <airlied@redhat.com>
> > Dave.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Intel-gfx] [PATCH v2] drm: prefix header search paths with $(srctree)/
2019-04-26 2:56 ` Dave Airlie
@ 2019-04-26 15:05 ` Daniel Vetter
0 siblings, 0 replies; 8+ messages in thread
From: Daniel Vetter @ 2019-04-26 15:05 UTC (permalink / raw)
To: Dave Airlie
Cc: Masahiro Yamada, Dave Airlie, Daniel Vetter, dri-devel, nouveau,
Sam Ravnborg, zhoucm1, amd-gfx mailing list, James (Qian) Wang,
Ben Skeggs, linux-arm-msm, Intel Graphics Development,
intel-gvt-dev, LKML, Koenig, Christian, Deucher, Alexander,
freedreno
On Fri, Apr 26, 2019 at 12:56:48PM +1000, Dave Airlie wrote:
> Daniel, drm-misc-next-fixes?
Makes sense. Pushed.
Cheers, Daniel
>
> Dave.
>
> On Fri, 26 Apr 2019 at 12:25, <yamada.masahiro@socionext.com> wrote:
> >
> > Hi Dave,
> >
> > > -----Original Message-----
> > > From: Dave Airlie [mailto:airlied@gmail.com]
> > > Sent: Friday, April 26, 2019 11:19 AM
> > > To: Yamada, Masahiro/山田 真弘 <yamada.masahiro@socionext.com>
> > > Cc: David Airlie <airlied@linux.ie>; Daniel Vetter <daniel@ffwll.ch>;
> > > dri-devel <dri-devel@lists.freedesktop.org>; nouveau
> > > <nouveau@lists.freedesktop.org>; Sam Ravnborg <sam@ravnborg.org>; David
> > > (ChunMing) Zhou <David1.Zhou@amd.com>; amd-gfx mailing list
> > > <amd-gfx@lists.freedesktop.org>; James (Qian) Wang
> > > <james.qian.wang@arm.com>; Ben Skeggs <bskeggs@redhat.com>;
> > > linux-arm-msm <linux-arm-msm@vger.kernel.org>; Intel Graphics
> > > Development <intel-gfx@lists.freedesktop.org>;
> > > intel-gvt-dev@lists.freedesktop.org; Linux Kernel Mailing List
> > > <linux-kernel@vger.kernel.org>; Christian König
> > > <christian.koenig@amd.com>; Alex Deucher <alexander.deucher@amd.com>;
> > > freedreno@lists.freedesktop.org
> > > Subject: Re: [Intel-gfx] [PATCH v2] drm: prefix header search paths with
> > > $(srctree)/
> > >
> > > On Fri, 26 Apr 2019 at 11:46, Masahiro Yamada
> > > <yamada.masahiro@socionext.com> wrote:
> > > >
> > > > Hi.
> > > >
> > > >
> > > > On Fri, Mar 29, 2019 at 8:37 PM Masahiro Yamada
> > > > <yamada.masahiro@socionext.com> wrote:
> > > > >
> > > > > Currently, the Kbuild core manipulates header search paths in a crazy
> > > > > way [1].
> > > > >
> > > > > To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
> > > > > the search paths in the srctree. Some Makefiles are already written
> > > in
> > > > > that way, but not all. The goal of this work is to make the notation
> > > > > consistent, and finally get rid of the gross hacks.
> > > > >
> > > > > Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
> > > > > ("kbuild: do not drop -I without parameter").
> > > > >
> > > > > [1]: https://patchwork.kernel.org/patch/9632347/
> > > > >
> > > > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > > > > Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> > > > > ---
> > > > >
> > > > > I put all gpu/drm changes into a single patch because
> > > > > they are trivial conversion.
> > > > >
> > > > > If you are interested in the big picture of this work,
> > > > > the full patch set is available at the following URL.
> > > > >
> > > > >
> > > git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.g
> > > it build-test
> > > >
> > > >
> > > > Is somebody taking care of this?
> > > >
> > >
> > > Are you expecting this to be merged in the drm tree? if so please
> > > indicate that when posting.
> >
> >
> > Sorry for unclearness.
> >
> > Could you apply this to your drm tree?
> >
> > Thanks.
> >
> >
> >
> >
> > > I'd assumed this would go via kbuild tree.
> > >
> > > If the later,
> > > Acked-by: Dave Airlie <airlied@redhat.com>
> > > Dave.
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 8+ messages in thread