* [PATCH v2 0/2] MT7621 PCIe PHY
@ 2019-03-30 5:50 Sergio Paracuellos
2019-03-30 5:50 ` [PATCH v2 1/2] dt-bindings: phy: Add binding for Mediatek " Sergio Paracuellos
2019-03-30 5:50 ` [PATCH v2 2/2] phy: ralink: Add PHY driver for " Sergio Paracuellos
0 siblings, 2 replies; 7+ messages in thread
From: Sergio Paracuellos @ 2019-03-30 5:50 UTC (permalink / raw)
To: kishon
Cc: linux-kernel, driverdev-devel, devicetree, john, linux-mips,
robh+dt, neil
This series adds support for the PCIe PHY found in the Mediatek
MT7621 SoC.
This is the first attempt to get feedback of what is missing in
this driver to be promoted from staging.
There is also a 'mt7621-pci' driver which is the controller part
which is still in staging and is a client of this phy.
Both drivers have been tested together in a gnubee1 board.
Changes in v2:
- Reorder patches to get bindings first in the series.
- Don't use child nodes in the device tree. Use #phy-cells=1 instead.
- Update driver code with new 'xlate' function for the new device tree.
- Minor changes in driver's macros changing some spaces to tabs.
Thanks in advance for your time.
Best regards,
Sergio Paracuellos
Sergio Paracuellos (2):
dt-bindings: phy: Add binding for Mediatek MT7621 PCIe PHY
phy: ralink: Add PHY driver for MT7621 PCIe PHY
.../bindings/phy/mediatek,mt7621-pci-phy.txt | 28 ++
drivers/phy/ralink/Kconfig | 7 +
drivers/phy/ralink/Makefile | 1 +
drivers/phy/ralink/phy-mt7621-pci.c | 401 ++++++++++++++++++
4 files changed, 437 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.txt
create mode 100644 drivers/phy/ralink/phy-mt7621-pci.c
--
2.19.1
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v2 1/2] dt-bindings: phy: Add binding for Mediatek MT7621 PCIe PHY 2019-03-30 5:50 [PATCH v2 0/2] MT7621 PCIe PHY Sergio Paracuellos @ 2019-03-30 5:50 ` Sergio Paracuellos 2019-04-06 6:05 ` Rob Herring 2019-03-30 5:50 ` [PATCH v2 2/2] phy: ralink: Add PHY driver for " Sergio Paracuellos 1 sibling, 1 reply; 7+ messages in thread From: Sergio Paracuellos @ 2019-03-30 5:50 UTC (permalink / raw) To: kishon Cc: linux-kernel, driverdev-devel, devicetree, john, linux-mips, robh+dt, neil Add bindings to describe Mediatek MT7621 PCIe PHY. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> --- .../bindings/phy/mediatek,mt7621-pci-phy.txt | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.txt diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.txt b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.txt new file mode 100644 index 000000000000..a369d715378b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.txt @@ -0,0 +1,28 @@ +Mediatek Mt7621 PCIe PHY + +Required properties: +- compatible: must be "mediatek,mt7621-pci-phy" +- reg: base address and length of the PCIe PHY block +- #phy-cells: must be <1> for pcie0_phy and for pcie1_phy. + +Example: + pcie0_phy: pcie-phy@1e149000 { + compatible = "mediatek,mt7621-pci-phy"; + reg = <0x1e149000 0x0700>; + #phy-cells = <1>; + }; + + pcie1_phy: pcie-phy@1e14a000 { + compatible = "mediatek,mt7621-pci-phy"; + reg = <0x1e14a000 0x0700>; + #phy-cells = <1>; + }; + + /* users of the PCIe phy */ + + pcie: pcie@1e140000 { + ... + ... + phys = <&pcie0_phy 0>, <&pcie0_phy 1>, <&pcie1_phy 0>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + }; -- 2.19.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: phy: Add binding for Mediatek MT7621 PCIe PHY 2019-03-30 5:50 ` [PATCH v2 1/2] dt-bindings: phy: Add binding for Mediatek " Sergio Paracuellos @ 2019-04-06 6:05 ` Rob Herring 0 siblings, 0 replies; 7+ messages in thread From: Rob Herring @ 2019-04-06 6:05 UTC (permalink / raw) To: Sergio Paracuellos Cc: kishon, linux-kernel, driverdev-devel, devicetree, john, linux-mips, robh+dt, neil On Sat, 30 Mar 2019 06:50:37 +0100, Sergio Paracuellos wrote: > Add bindings to describe Mediatek MT7621 PCIe PHY. > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> > --- > .../bindings/phy/mediatek,mt7621-pci-phy.txt | 28 +++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.txt > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 2/2] phy: ralink: Add PHY driver for MT7621 PCIe PHY 2019-03-30 5:50 [PATCH v2 0/2] MT7621 PCIe PHY Sergio Paracuellos 2019-03-30 5:50 ` [PATCH v2 1/2] dt-bindings: phy: Add binding for Mediatek " Sergio Paracuellos @ 2019-03-30 5:50 ` Sergio Paracuellos 2019-04-13 6:41 ` Sergio Paracuellos 2019-04-17 5:57 ` Kishon Vijay Abraham I 1 sibling, 2 replies; 7+ messages in thread From: Sergio Paracuellos @ 2019-03-30 5:50 UTC (permalink / raw) To: kishon Cc: linux-kernel, driverdev-devel, devicetree, john, linux-mips, robh+dt, neil This patch adds a driver for the PCIe PHY of MT7621 SoC. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> --- drivers/phy/ralink/Kconfig | 7 + drivers/phy/ralink/Makefile | 1 + drivers/phy/ralink/phy-mt7621-pci.c | 401 ++++++++++++++++++++++++++++ 3 files changed, 409 insertions(+) create mode 100644 drivers/phy/ralink/phy-mt7621-pci.c diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig index 14fd219535ef..87943a10f210 100644 --- a/drivers/phy/ralink/Kconfig +++ b/drivers/phy/ralink/Kconfig @@ -1,6 +1,13 @@ # # PHY drivers for Ralink platforms. # +config PHY_MT7621_PCI + tristate "MediaTek MT7621 PCI PHY Driver" + depends on RALINK && OF + select GENERIC_PHY + help + Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver, + config PHY_RALINK_USB tristate "Ralink USB PHY driver" depends on RALINK || COMPILE_TEST diff --git a/drivers/phy/ralink/Makefile b/drivers/phy/ralink/Makefile index 5c9e326e8757..2052d5649863 100644 --- a/drivers/phy/ralink/Makefile +++ b/drivers/phy/ralink/Makefile @@ -1 +1,2 @@ +obj-$(CONFIG_PHY_MT7621_PCI) += phy-mt7621-pci.o obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c new file mode 100644 index 000000000000..118302c122ee --- /dev/null +++ b/drivers/phy/ralink/phy-mt7621-pci.c @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Mediatek MT7621 PCI PHY Driver + * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com> + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <mt7621.h> +#include <ralink_regs.h> + +#define RALINK_CLKCFG1 0x30 +#define CHIP_REV_MT7621_E2 0x0101 + +#define PCIE_PORT_CLK_EN(x) BIT(24 + (x)) + +#define RG_PE1_PIPE_REG 0x02c +#define RG_PE1_PIPE_RST BIT(12) +#define RG_PE1_PIPE_CMD_FRC BIT(4) + +#define RG_P0_TO_P1_WIDTH 0x100 +#define RG_PE1_H_LCDDS_REG 0x49c +#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0) +#define RG_PE1_H_LCDDS_PCW_VAL(x) ((0x7fffffff & (x)) << 0) + +#define RG_PE1_FRC_H_XTAL_REG 0x400 +#define RG_PE1_FRC_H_XTAL_TYPE BIT(8) +#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9) +#define RG_PE1_H_XTAL_TYPE_VAL(x) ((0x3 & (x)) << 9) + +#define RG_PE1_FRC_PHY_REG 0x000 +#define RG_PE1_FRC_PHY_EN BIT(4) +#define RG_PE1_PHY_EN BIT(5) + +#define RG_PE1_H_PLL_REG 0x490 +#define RG_PE1_H_PLL_BC GENMASK(23, 22) +#define RG_PE1_H_PLL_BC_VAL(x) ((0x3 & (x)) << 22) +#define RG_PE1_H_PLL_BP GENMASK(21, 18) +#define RG_PE1_H_PLL_BP_VAL(x) ((0xf & (x)) << 18) +#define RG_PE1_H_PLL_IR GENMASK(15, 12) +#define RG_PE1_H_PLL_IR_VAL(x) ((0xf & (x)) << 12) +#define RG_PE1_H_PLL_IC GENMASK(11, 8) +#define RG_PE1_H_PLL_IC_VAL(x) ((0xf & (x)) << 8) +#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6) +#define RG_PE1_H_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6) +#define RG_PE1_PLL_DIVEN GENMASK(3, 1) +#define RG_PE1_PLL_DIVEN_VAL(x) ((0x7 & (x)) << 1) + +#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc +#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4) +#define RG_PE1_H_PLL_FBKSEL_VAL(x) ((0x3 & (x)) << 4) + +#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4 +#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0) +#define RG_PE1_H_LCDDS_SSC_PRD_VAL(x) ((0xffff & (x)) << 0) + +#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8 +#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0) +#define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x) ((0xfff & (x)) << 0) +#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16) +#define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x) ((0xff & (x)) << 16) + +#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0 +#define RG_PE1_LCDDS_CLK_PH_INV BIT(5) + +#define RG_PE1_H_PLL_BR_REG 0x4ac +#define RG_PE1_H_PLL_BR GENMASK(18, 16) +#define RG_PE1_H_PLL_BR_VAL(x) ((0x7 & (x)) << 16) + +#define RG_PE1_MSTCKDIV_REG 0x414 +#define RG_PE1_MSTCKDIV GENMASK(7, 6) +#define RG_PE1_MSTCKDIV_VAL(x) ((0x3 & (x)) << 6) + +#define RG_PE1_FRC_MSTCKDIV BIT(5) + +#define MAX_PHYS 2 + +/** + * struct mt7621_pci_phy_instance - Mt7621 Pcie PHY device + * @phy: pointer to the kernel PHY device + * @port_base: base register + * @index: internal ID to identify the Mt7621 PCIe PHY + */ +struct mt7621_pci_phy_instance { + struct phy *phy; + void __iomem *port_base; + u32 index; +}; + +/** + * struct mt7621_pci_phy - Mt7621 Pcie PHY core + * @dev: pointer to device + * @phys: pointer to Mt7621 PHY device + * @nphys: number of PHY devices for this core + */ +struct mt7621_pci_phy { + struct device *dev; + struct mt7621_pci_phy_instance **phys; + int nphys; +}; + +static inline u32 phy_read(struct mt7621_pci_phy_instance *instance, u32 reg) +{ + return readl(instance->port_base + reg); +} + +static inline void phy_write(struct mt7621_pci_phy_instance *instance, + u32 val, u32 reg) +{ + writel(val, instance->port_base + reg); +} + +static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy, + struct mt7621_pci_phy_instance *instance) +{ + u32 offset = (instance->index != 1) ? + RG_PE1_PIPE_REG : RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH; + u32 reg; + + reg = phy_read(instance, offset); + reg &= ~(RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC); + reg |= (RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC); + phy_write(instance, reg, offset); +} + +static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy, + struct mt7621_pci_phy_instance *instance) +{ + struct device *dev = phy->dev; + u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); + u32 offset; + u32 val; + + reg = (reg >> 6) & 0x7; + /* Set PCIe Port PHY to disable SSC */ + /* Debug Xtal Type */ + val = phy_read(instance, RG_PE1_FRC_H_XTAL_REG); + val &= ~(RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE); + val |= RG_PE1_FRC_H_XTAL_TYPE; + val |= RG_PE1_H_XTAL_TYPE_VAL(0x00); + phy_write(instance, val, RG_PE1_FRC_H_XTAL_REG); + + /* disable port */ + offset = (instance->index != 1) ? + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; + val = phy_read(instance, offset); + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); + val |= RG_PE1_FRC_PHY_EN; + phy_write(instance, val, offset); + + /* Set Pre-divider ratio (for host mode) */ + val = phy_read(instance, RG_PE1_H_PLL_REG); + val &= ~(RG_PE1_H_PLL_PREDIV); + + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ + val |= RG_PE1_H_PLL_PREDIV_VAL(0x01); + phy_write(instance, val, RG_PE1_H_PLL_REG); + dev_info(dev, "Xtal is 40MHz\n"); + } else { /* 25MHz | 20MHz Xtal */ + val |= RG_PE1_H_PLL_PREDIV_VAL(0x00); + phy_write(instance, val, RG_PE1_H_PLL_REG); + if (reg >= 6) { + dev_info(dev, "Xtal is 25MHz\n"); + + /* Select feedback clock */ + val = phy_read(instance, RG_PE1_H_PLL_FBKSEL_REG); + val &= ~(RG_PE1_H_PLL_FBKSEL); + val |= RG_PE1_H_PLL_FBKSEL_VAL(0x01); + phy_write(instance, val, RG_PE1_H_PLL_FBKSEL_REG); + + /* DDS NCPO PCW (for host mode) */ + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG); + val &= ~(RG_PE1_H_LCDDS_SSC_PRD); + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000); + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG); + + /* DDS SSC dither period control */ + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG); + val &= ~(RG_PE1_H_LCDDS_SSC_PRD); + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d); + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG); + + /* DDS SSC dither amplitude control */ + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_DELTA_REG); + val &= ~(RG_PE1_H_LCDDS_SSC_DELTA | + RG_PE1_H_LCDDS_SSC_DELTA1); + val |= RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a); + val |= RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a); + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_DELTA_REG); + } else { + dev_info(dev, "Xtal is 20MHz\n"); + } + } + + /* DDS clock inversion */ + val = phy_read(instance, RG_PE1_LCDDS_CLK_PH_INV_REG); + val &= ~(RG_PE1_LCDDS_CLK_PH_INV); + val |= RG_PE1_LCDDS_CLK_PH_INV; + phy_write(instance, val, RG_PE1_LCDDS_CLK_PH_INV_REG); + + /* Set PLL bits */ + val = phy_read(instance, RG_PE1_H_PLL_REG); + val &= ~(RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR | + RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN); + val |= RG_PE1_H_PLL_BC_VAL(0x02); + val |= RG_PE1_H_PLL_BP_VAL(0x06); + val |= RG_PE1_H_PLL_IR_VAL(0x02); + val |= RG_PE1_H_PLL_IC_VAL(0x01); + val |= RG_PE1_PLL_DIVEN_VAL(0x02); + phy_write(instance, val, RG_PE1_H_PLL_REG); + + val = phy_read(instance, RG_PE1_H_PLL_BR_REG); + val &= ~(RG_PE1_H_PLL_BR); + val |= RG_PE1_H_PLL_BR_VAL(0x00); + phy_write(instance, val, RG_PE1_H_PLL_BR_REG); + + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ + /* set force mode enable of da_pe1_mstckdiv */ + val = phy_read(instance, RG_PE1_MSTCKDIV_REG); + val &= ~(RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV); + val |= (RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV); + phy_write(instance, val, RG_PE1_MSTCKDIV_REG); + } +} + +static int mt7621_pci_phy_init(struct phy *phy) +{ + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); + struct mt7621_pci_phy *mphy = dev_get_drvdata(phy->dev.parent); + u32 chip_rev_id = rt_sysc_r32(SYSC_REG_CHIP_REV); + + if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2) + mt7621_bypass_pipe_rst(mphy, instance); + + mt7621_set_phy_for_ssc(mphy, instance); + + return 0; +} + +static int mt7621_pci_phy_power_on(struct phy *phy) +{ + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); + u32 offset = (instance->index != 1) ? + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; + u32 val; + + /* Enable PHY and disable force mode */ + val = phy_read(instance, offset); + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); + val |= (RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); + phy_write(instance, val, offset); + + return 0; +} + +static int mt7621_pci_phy_power_off(struct phy *phy) +{ + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); + u32 offset = (instance->index != 1) ? + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; + u32 val; + + /* Disable PHY */ + val = phy_read(instance, offset); + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); + val |= RG_PE1_FRC_PHY_EN; + phy_write(instance, val, offset); + + return 0; +} + +static int mt7621_pci_phy_exit(struct phy *phy) +{ + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); + + rt_sysc_m32(PCIE_PORT_CLK_EN(instance->index), 0, RALINK_CLKCFG1); + + return 0; +} + +static const struct phy_ops mt7621_pci_phy_ops = { + .init = mt7621_pci_phy_init, + .exit = mt7621_pci_phy_exit, + .power_on = mt7621_pci_phy_power_on, + .power_off = mt7621_pci_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev); + + if (args->args_count == 0) + return mt7621_phy->phys[0]->phy; + + if (WARN_ON(args->args[0] >= MAX_PHYS)) + return ERR_PTR(-ENODEV); + + return mt7621_phy->phys[args->args[0]]->phy; +} + +static int mt7621_pci_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct mt7621_pci_phy *phy; + struct resource res; + int port, ret; + void __iomem *port_base; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->nphys = MAX_PHYS; + phy->phys = devm_kcalloc(dev, phy->nphys, + sizeof(*phy->phys), GFP_KERNEL); + if (!phy->phys) + return -ENOMEM; + + phy->dev = dev; + platform_set_drvdata(pdev, phy); + + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(dev, "failed to get address resource(id-%d)\n", port); + return ret; + } + + port_base = devm_ioremap_resource(dev, &res); + if (IS_ERR(port_base)) { + dev_err(dev, "failed to remap phy regs\n"); + return PTR_ERR(port_base); + } + + for (port = 0; port < MAX_PHYS; port++) { + struct mt7621_pci_phy_instance *instance; + struct phy *pphy; + + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); + if (!instance) { + ret = -ENOMEM; + goto put_child; + } + + phy->phys[port] = instance; + + pphy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + ret = PTR_ERR(phy); + goto put_child; + } + + instance->port_base = port_base; + instance->phy = pphy; + instance->index = port; + phy_set_drvdata(pphy, instance); + } + + provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate); + + return PTR_ERR_OR_ZERO(provider); + +put_child: + of_node_put(child_np); + return ret; +} + +static const struct of_device_id mt7621_pci_phy_ids[] = { + { .compatible = "mediatek,mt7621-pci-phy" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt7621_pci_ids); + +static struct platform_driver mt7621_pci_phy_driver = { + .probe = mt7621_pci_phy_probe, + .driver = { + .name = "mt7621-pci-phy", + .of_match_table = of_match_ptr(mt7621_pci_phy_ids), + }, +}; + +static int __init mt7621_pci_phy_drv_init(void) +{ + return platform_driver_register(&mt7621_pci_phy_driver); +} + +module_init(mt7621_pci_phy_drv_init); + +MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>"); +MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); -- 2.19.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] phy: ralink: Add PHY driver for MT7621 PCIe PHY 2019-03-30 5:50 ` [PATCH v2 2/2] phy: ralink: Add PHY driver for " Sergio Paracuellos @ 2019-04-13 6:41 ` Sergio Paracuellos 2019-04-17 5:57 ` Kishon Vijay Abraham I 1 sibling, 0 replies; 7+ messages in thread From: Sergio Paracuellos @ 2019-04-13 6:41 UTC (permalink / raw) To: kishon Cc: linux-kernel, driverdev-devel, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, John Crispin, linux-mips, Rob Herring, NeilBrown Hi all! On Sat, Mar 30, 2019 at 6:50 AM Sergio Paracuellos <sergio.paracuellos@gmail.com> wrote: > > This patch adds a driver for the PCIe PHY of MT7621 SoC. > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> > --- > drivers/phy/ralink/Kconfig | 7 + > drivers/phy/ralink/Makefile | 1 + > drivers/phy/ralink/phy-mt7621-pci.c | 401 ++++++++++++++++++++++++++++ > 3 files changed, 409 insertions(+) > create mode 100644 drivers/phy/ralink/phy-mt7621-pci.c Any comments on this? Thanks in advance for your time. Best regards, Sergio Paracuellos > > diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig > index 14fd219535ef..87943a10f210 100644 > --- a/drivers/phy/ralink/Kconfig > +++ b/drivers/phy/ralink/Kconfig > @@ -1,6 +1,13 @@ > # > # PHY drivers for Ralink platforms. > # > +config PHY_MT7621_PCI > + tristate "MediaTek MT7621 PCI PHY Driver" > + depends on RALINK && OF > + select GENERIC_PHY > + help > + Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver, > + > config PHY_RALINK_USB > tristate "Ralink USB PHY driver" > depends on RALINK || COMPILE_TEST > diff --git a/drivers/phy/ralink/Makefile b/drivers/phy/ralink/Makefile > index 5c9e326e8757..2052d5649863 100644 > --- a/drivers/phy/ralink/Makefile > +++ b/drivers/phy/ralink/Makefile > @@ -1 +1,2 @@ > +obj-$(CONFIG_PHY_MT7621_PCI) += phy-mt7621-pci.o > obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o > diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c > new file mode 100644 > index 000000000000..118302c122ee > --- /dev/null > +++ b/drivers/phy/ralink/phy-mt7621-pci.c > @@ -0,0 +1,401 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Mediatek MT7621 PCI PHY Driver > + * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com> > + */ > + > +#include <dt-bindings/phy/phy.h> > +#include <linux/bitops.h> > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/of_device.h> > +#include <linux/phy/phy.h> > +#include <linux/platform_device.h> > +#include <mt7621.h> > +#include <ralink_regs.h> > + > +#define RALINK_CLKCFG1 0x30 > +#define CHIP_REV_MT7621_E2 0x0101 > + > +#define PCIE_PORT_CLK_EN(x) BIT(24 + (x)) > + > +#define RG_PE1_PIPE_REG 0x02c > +#define RG_PE1_PIPE_RST BIT(12) > +#define RG_PE1_PIPE_CMD_FRC BIT(4) > + > +#define RG_P0_TO_P1_WIDTH 0x100 > +#define RG_PE1_H_LCDDS_REG 0x49c > +#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0) > +#define RG_PE1_H_LCDDS_PCW_VAL(x) ((0x7fffffff & (x)) << 0) > + > +#define RG_PE1_FRC_H_XTAL_REG 0x400 > +#define RG_PE1_FRC_H_XTAL_TYPE BIT(8) > +#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9) > +#define RG_PE1_H_XTAL_TYPE_VAL(x) ((0x3 & (x)) << 9) > + > +#define RG_PE1_FRC_PHY_REG 0x000 > +#define RG_PE1_FRC_PHY_EN BIT(4) > +#define RG_PE1_PHY_EN BIT(5) > + > +#define RG_PE1_H_PLL_REG 0x490 > +#define RG_PE1_H_PLL_BC GENMASK(23, 22) > +#define RG_PE1_H_PLL_BC_VAL(x) ((0x3 & (x)) << 22) > +#define RG_PE1_H_PLL_BP GENMASK(21, 18) > +#define RG_PE1_H_PLL_BP_VAL(x) ((0xf & (x)) << 18) > +#define RG_PE1_H_PLL_IR GENMASK(15, 12) > +#define RG_PE1_H_PLL_IR_VAL(x) ((0xf & (x)) << 12) > +#define RG_PE1_H_PLL_IC GENMASK(11, 8) > +#define RG_PE1_H_PLL_IC_VAL(x) ((0xf & (x)) << 8) > +#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6) > +#define RG_PE1_H_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6) > +#define RG_PE1_PLL_DIVEN GENMASK(3, 1) > +#define RG_PE1_PLL_DIVEN_VAL(x) ((0x7 & (x)) << 1) > + > +#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc > +#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4) > +#define RG_PE1_H_PLL_FBKSEL_VAL(x) ((0x3 & (x)) << 4) > + > +#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4 > +#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0) > +#define RG_PE1_H_LCDDS_SSC_PRD_VAL(x) ((0xffff & (x)) << 0) > + > +#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8 > +#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0) > +#define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x) ((0xfff & (x)) << 0) > +#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16) > +#define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x) ((0xff & (x)) << 16) > + > +#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0 > +#define RG_PE1_LCDDS_CLK_PH_INV BIT(5) > + > +#define RG_PE1_H_PLL_BR_REG 0x4ac > +#define RG_PE1_H_PLL_BR GENMASK(18, 16) > +#define RG_PE1_H_PLL_BR_VAL(x) ((0x7 & (x)) << 16) > + > +#define RG_PE1_MSTCKDIV_REG 0x414 > +#define RG_PE1_MSTCKDIV GENMASK(7, 6) > +#define RG_PE1_MSTCKDIV_VAL(x) ((0x3 & (x)) << 6) > + > +#define RG_PE1_FRC_MSTCKDIV BIT(5) > + > +#define MAX_PHYS 2 > + > +/** > + * struct mt7621_pci_phy_instance - Mt7621 Pcie PHY device > + * @phy: pointer to the kernel PHY device > + * @port_base: base register > + * @index: internal ID to identify the Mt7621 PCIe PHY > + */ > +struct mt7621_pci_phy_instance { > + struct phy *phy; > + void __iomem *port_base; > + u32 index; > +}; > + > +/** > + * struct mt7621_pci_phy - Mt7621 Pcie PHY core > + * @dev: pointer to device > + * @phys: pointer to Mt7621 PHY device > + * @nphys: number of PHY devices for this core > + */ > +struct mt7621_pci_phy { > + struct device *dev; > + struct mt7621_pci_phy_instance **phys; > + int nphys; > +}; > + > +static inline u32 phy_read(struct mt7621_pci_phy_instance *instance, u32 reg) > +{ > + return readl(instance->port_base + reg); > +} > + > +static inline void phy_write(struct mt7621_pci_phy_instance *instance, > + u32 val, u32 reg) > +{ > + writel(val, instance->port_base + reg); > +} > + > +static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy, > + struct mt7621_pci_phy_instance *instance) > +{ > + u32 offset = (instance->index != 1) ? > + RG_PE1_PIPE_REG : RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH; > + u32 reg; > + > + reg = phy_read(instance, offset); > + reg &= ~(RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC); > + reg |= (RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC); > + phy_write(instance, reg, offset); > +} > + > +static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy, > + struct mt7621_pci_phy_instance *instance) > +{ > + struct device *dev = phy->dev; > + u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); > + u32 offset; > + u32 val; > + > + reg = (reg >> 6) & 0x7; > + /* Set PCIe Port PHY to disable SSC */ > + /* Debug Xtal Type */ > + val = phy_read(instance, RG_PE1_FRC_H_XTAL_REG); > + val &= ~(RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE); > + val |= RG_PE1_FRC_H_XTAL_TYPE; > + val |= RG_PE1_H_XTAL_TYPE_VAL(0x00); > + phy_write(instance, val, RG_PE1_FRC_H_XTAL_REG); > + > + /* disable port */ > + offset = (instance->index != 1) ? > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > + val = phy_read(instance, offset); > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > + val |= RG_PE1_FRC_PHY_EN; > + phy_write(instance, val, offset); > + > + /* Set Pre-divider ratio (for host mode) */ > + val = phy_read(instance, RG_PE1_H_PLL_REG); > + val &= ~(RG_PE1_H_PLL_PREDIV); > + > + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ > + val |= RG_PE1_H_PLL_PREDIV_VAL(0x01); > + phy_write(instance, val, RG_PE1_H_PLL_REG); > + dev_info(dev, "Xtal is 40MHz\n"); > + } else { /* 25MHz | 20MHz Xtal */ > + val |= RG_PE1_H_PLL_PREDIV_VAL(0x00); > + phy_write(instance, val, RG_PE1_H_PLL_REG); > + if (reg >= 6) { > + dev_info(dev, "Xtal is 25MHz\n"); > + > + /* Select feedback clock */ > + val = phy_read(instance, RG_PE1_H_PLL_FBKSEL_REG); > + val &= ~(RG_PE1_H_PLL_FBKSEL); > + val |= RG_PE1_H_PLL_FBKSEL_VAL(0x01); > + phy_write(instance, val, RG_PE1_H_PLL_FBKSEL_REG); > + > + /* DDS NCPO PCW (for host mode) */ > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG); > + val &= ~(RG_PE1_H_LCDDS_SSC_PRD); > + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000); > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG); > + > + /* DDS SSC dither period control */ > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG); > + val &= ~(RG_PE1_H_LCDDS_SSC_PRD); > + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d); > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG); > + > + /* DDS SSC dither amplitude control */ > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_DELTA_REG); > + val &= ~(RG_PE1_H_LCDDS_SSC_DELTA | > + RG_PE1_H_LCDDS_SSC_DELTA1); > + val |= RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a); > + val |= RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a); > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_DELTA_REG); > + } else { > + dev_info(dev, "Xtal is 20MHz\n"); > + } > + } > + > + /* DDS clock inversion */ > + val = phy_read(instance, RG_PE1_LCDDS_CLK_PH_INV_REG); > + val &= ~(RG_PE1_LCDDS_CLK_PH_INV); > + val |= RG_PE1_LCDDS_CLK_PH_INV; > + phy_write(instance, val, RG_PE1_LCDDS_CLK_PH_INV_REG); > + > + /* Set PLL bits */ > + val = phy_read(instance, RG_PE1_H_PLL_REG); > + val &= ~(RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR | > + RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN); > + val |= RG_PE1_H_PLL_BC_VAL(0x02); > + val |= RG_PE1_H_PLL_BP_VAL(0x06); > + val |= RG_PE1_H_PLL_IR_VAL(0x02); > + val |= RG_PE1_H_PLL_IC_VAL(0x01); > + val |= RG_PE1_PLL_DIVEN_VAL(0x02); > + phy_write(instance, val, RG_PE1_H_PLL_REG); > + > + val = phy_read(instance, RG_PE1_H_PLL_BR_REG); > + val &= ~(RG_PE1_H_PLL_BR); > + val |= RG_PE1_H_PLL_BR_VAL(0x00); > + phy_write(instance, val, RG_PE1_H_PLL_BR_REG); > + > + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ > + /* set force mode enable of da_pe1_mstckdiv */ > + val = phy_read(instance, RG_PE1_MSTCKDIV_REG); > + val &= ~(RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV); > + val |= (RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV); > + phy_write(instance, val, RG_PE1_MSTCKDIV_REG); > + } > +} > + > +static int mt7621_pci_phy_init(struct phy *phy) > +{ > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > + struct mt7621_pci_phy *mphy = dev_get_drvdata(phy->dev.parent); > + u32 chip_rev_id = rt_sysc_r32(SYSC_REG_CHIP_REV); > + > + if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2) > + mt7621_bypass_pipe_rst(mphy, instance); > + > + mt7621_set_phy_for_ssc(mphy, instance); > + > + return 0; > +} > + > +static int mt7621_pci_phy_power_on(struct phy *phy) > +{ > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > + u32 offset = (instance->index != 1) ? > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > + u32 val; > + > + /* Enable PHY and disable force mode */ > + val = phy_read(instance, offset); > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > + val |= (RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > + phy_write(instance, val, offset); > + > + return 0; > +} > + > +static int mt7621_pci_phy_power_off(struct phy *phy) > +{ > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > + u32 offset = (instance->index != 1) ? > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > + u32 val; > + > + /* Disable PHY */ > + val = phy_read(instance, offset); > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > + val |= RG_PE1_FRC_PHY_EN; > + phy_write(instance, val, offset); > + > + return 0; > +} > + > +static int mt7621_pci_phy_exit(struct phy *phy) > +{ > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > + > + rt_sysc_m32(PCIE_PORT_CLK_EN(instance->index), 0, RALINK_CLKCFG1); > + > + return 0; > +} > + > +static const struct phy_ops mt7621_pci_phy_ops = { > + .init = mt7621_pci_phy_init, > + .exit = mt7621_pci_phy_exit, > + .power_on = mt7621_pci_phy_power_on, > + .power_off = mt7621_pci_phy_power_off, > + .owner = THIS_MODULE, > +}; > + > +static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev); > + > + if (args->args_count == 0) > + return mt7621_phy->phys[0]->phy; > + > + if (WARN_ON(args->args[0] >= MAX_PHYS)) > + return ERR_PTR(-ENODEV); > + > + return mt7621_phy->phys[args->args[0]]->phy; > +} > + > +static int mt7621_pci_phy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + struct device_node *child_np; > + struct phy_provider *provider; > + struct mt7621_pci_phy *phy; > + struct resource res; > + int port, ret; > + void __iomem *port_base; > + > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); > + if (!phy) > + return -ENOMEM; > + > + phy->nphys = MAX_PHYS; > + phy->phys = devm_kcalloc(dev, phy->nphys, > + sizeof(*phy->phys), GFP_KERNEL); > + if (!phy->phys) > + return -ENOMEM; > + > + phy->dev = dev; > + platform_set_drvdata(pdev, phy); > + > + ret = of_address_to_resource(np, 0, &res); > + if (ret) { > + dev_err(dev, "failed to get address resource(id-%d)\n", port); > + return ret; > + } > + > + port_base = devm_ioremap_resource(dev, &res); > + if (IS_ERR(port_base)) { > + dev_err(dev, "failed to remap phy regs\n"); > + return PTR_ERR(port_base); > + } > + > + for (port = 0; port < MAX_PHYS; port++) { > + struct mt7621_pci_phy_instance *instance; > + struct phy *pphy; > + > + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); > + if (!instance) { > + ret = -ENOMEM; > + goto put_child; > + } > + > + phy->phys[port] = instance; > + > + pphy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops); > + if (IS_ERR(phy)) { > + dev_err(dev, "failed to create phy\n"); > + ret = PTR_ERR(phy); > + goto put_child; > + } > + > + instance->port_base = port_base; > + instance->phy = pphy; > + instance->index = port; > + phy_set_drvdata(pphy, instance); > + } > + > + provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate); > + > + return PTR_ERR_OR_ZERO(provider); > + > +put_child: > + of_node_put(child_np); > + return ret; > +} > + > +static const struct of_device_id mt7621_pci_phy_ids[] = { > + { .compatible = "mediatek,mt7621-pci-phy" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, mt7621_pci_ids); > + > +static struct platform_driver mt7621_pci_phy_driver = { > + .probe = mt7621_pci_phy_probe, > + .driver = { > + .name = "mt7621-pci-phy", > + .of_match_table = of_match_ptr(mt7621_pci_phy_ids), > + }, > +}; > + > +static int __init mt7621_pci_phy_drv_init(void) > +{ > + return platform_driver_register(&mt7621_pci_phy_driver); > +} > + > +module_init(mt7621_pci_phy_drv_init); > + > +MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>"); > +MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.19.1 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] phy: ralink: Add PHY driver for MT7621 PCIe PHY 2019-03-30 5:50 ` [PATCH v2 2/2] phy: ralink: Add PHY driver for " Sergio Paracuellos 2019-04-13 6:41 ` Sergio Paracuellos @ 2019-04-17 5:57 ` Kishon Vijay Abraham I 2019-04-17 7:33 ` Sergio Paracuellos 1 sibling, 1 reply; 7+ messages in thread From: Kishon Vijay Abraham I @ 2019-04-17 5:57 UTC (permalink / raw) To: Sergio Paracuellos Cc: linux-kernel, driverdev-devel, devicetree, john, linux-mips, robh+dt, neil Hi, On 30/03/19 11:20 AM, Sergio Paracuellos wrote: > This patch adds a driver for the PCIe PHY of MT7621 SoC. > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> > --- > drivers/phy/ralink/Kconfig | 7 + > drivers/phy/ralink/Makefile | 1 + > drivers/phy/ralink/phy-mt7621-pci.c | 401 ++++++++++++++++++++++++++++ > 3 files changed, 409 insertions(+) > create mode 100644 drivers/phy/ralink/phy-mt7621-pci.c > > diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig > index 14fd219535ef..87943a10f210 100644 > --- a/drivers/phy/ralink/Kconfig > +++ b/drivers/phy/ralink/Kconfig > @@ -1,6 +1,13 @@ > # > # PHY drivers for Ralink platforms. > # > +config PHY_MT7621_PCI > + tristate "MediaTek MT7621 PCI PHY Driver" Shouldn't this be in drivers/phy/mediatek/ then? > + depends on RALINK && OF Add depends on COMPILE_TEST. > + select GENERIC_PHY > + help > + Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver, > + > config PHY_RALINK_USB > tristate "Ralink USB PHY driver" > depends on RALINK || COMPILE_TEST > diff --git a/drivers/phy/ralink/Makefile b/drivers/phy/ralink/Makefile > index 5c9e326e8757..2052d5649863 100644 > --- a/drivers/phy/ralink/Makefile > +++ b/drivers/phy/ralink/Makefile > @@ -1 +1,2 @@ > +obj-$(CONFIG_PHY_MT7621_PCI) += phy-mt7621-pci.o > obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o > diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c > new file mode 100644 > index 000000000000..118302c122ee > --- /dev/null > +++ b/drivers/phy/ralink/phy-mt7621-pci.c > @@ -0,0 +1,401 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Mediatek MT7621 PCI PHY Driver > + * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com> > + */ > + > +#include <dt-bindings/phy/phy.h> > +#include <linux/bitops.h> > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/of_device.h> > +#include <linux/phy/phy.h> > +#include <linux/platform_device.h> > +#include <mt7621.h> > +#include <ralink_regs.h> > + > +#define RALINK_CLKCFG1 0x30 > +#define CHIP_REV_MT7621_E2 0x0101 Is this PHY specific or SoC revision? If it is SoC, we should use soc_device_attribute and soc_device_match. > + > +#define PCIE_PORT_CLK_EN(x) BIT(24 + (x)) > + > +#define RG_PE1_PIPE_REG 0x02c > +#define RG_PE1_PIPE_RST BIT(12) > +#define RG_PE1_PIPE_CMD_FRC BIT(4) > + > +#define RG_P0_TO_P1_WIDTH 0x100 > +#define RG_PE1_H_LCDDS_REG 0x49c > +#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0) > +#define RG_PE1_H_LCDDS_PCW_VAL(x) ((0x7fffffff & (x)) << 0) > + > +#define RG_PE1_FRC_H_XTAL_REG 0x400 > +#define RG_PE1_FRC_H_XTAL_TYPE BIT(8) > +#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9) > +#define RG_PE1_H_XTAL_TYPE_VAL(x) ((0x3 & (x)) << 9) > + > +#define RG_PE1_FRC_PHY_REG 0x000 > +#define RG_PE1_FRC_PHY_EN BIT(4) > +#define RG_PE1_PHY_EN BIT(5) > + > +#define RG_PE1_H_PLL_REG 0x490 > +#define RG_PE1_H_PLL_BC GENMASK(23, 22) > +#define RG_PE1_H_PLL_BC_VAL(x) ((0x3 & (x)) << 22) > +#define RG_PE1_H_PLL_BP GENMASK(21, 18) > +#define RG_PE1_H_PLL_BP_VAL(x) ((0xf & (x)) << 18) > +#define RG_PE1_H_PLL_IR GENMASK(15, 12) > +#define RG_PE1_H_PLL_IR_VAL(x) ((0xf & (x)) << 12) > +#define RG_PE1_H_PLL_IC GENMASK(11, 8) > +#define RG_PE1_H_PLL_IC_VAL(x) ((0xf & (x)) << 8) > +#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6) > +#define RG_PE1_H_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6) > +#define RG_PE1_PLL_DIVEN GENMASK(3, 1) > +#define RG_PE1_PLL_DIVEN_VAL(x) ((0x7 & (x)) << 1) > + > +#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc > +#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4) > +#define RG_PE1_H_PLL_FBKSEL_VAL(x) ((0x3 & (x)) << 4) > + > +#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4 > +#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0) > +#define RG_PE1_H_LCDDS_SSC_PRD_VAL(x) ((0xffff & (x)) << 0) > + > +#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8 > +#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0) > +#define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x) ((0xfff & (x)) << 0) > +#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16) > +#define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x) ((0xff & (x)) << 16) > + > +#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0 > +#define RG_PE1_LCDDS_CLK_PH_INV BIT(5) > + > +#define RG_PE1_H_PLL_BR_REG 0x4ac > +#define RG_PE1_H_PLL_BR GENMASK(18, 16) > +#define RG_PE1_H_PLL_BR_VAL(x) ((0x7 & (x)) << 16) > + > +#define RG_PE1_MSTCKDIV_REG 0x414 > +#define RG_PE1_MSTCKDIV GENMASK(7, 6) > +#define RG_PE1_MSTCKDIV_VAL(x) ((0x3 & (x)) << 6) > + > +#define RG_PE1_FRC_MSTCKDIV BIT(5) > + > +#define MAX_PHYS 2 > + > +/** > + * struct mt7621_pci_phy_instance - Mt7621 Pcie PHY device > + * @phy: pointer to the kernel PHY device > + * @port_base: base register > + * @index: internal ID to identify the Mt7621 PCIe PHY > + */ > +struct mt7621_pci_phy_instance { > + struct phy *phy; > + void __iomem *port_base; > + u32 index; > +}; > + > +/** > + * struct mt7621_pci_phy - Mt7621 Pcie PHY core > + * @dev: pointer to device > + * @phys: pointer to Mt7621 PHY device > + * @nphys: number of PHY devices for this core > + */ > +struct mt7621_pci_phy { > + struct device *dev; > + struct mt7621_pci_phy_instance **phys; > + int nphys; > +}; > + > +static inline u32 phy_read(struct mt7621_pci_phy_instance *instance, u32 reg) > +{ > + return readl(instance->port_base + reg); > +} > + > +static inline void phy_write(struct mt7621_pci_phy_instance *instance, > + u32 val, u32 reg) > +{ > + writel(val, instance->port_base + reg); > +} > + > +static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy, > + struct mt7621_pci_phy_instance *instance) > +{ > + u32 offset = (instance->index != 1) ? > + RG_PE1_PIPE_REG : RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH; > + u32 reg; > + > + reg = phy_read(instance, offset); > + reg &= ~(RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC); > + reg |= (RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC); > + phy_write(instance, reg, offset); > +} > + > +static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy, > + struct mt7621_pci_phy_instance *instance) > +{ > + struct device *dev = phy->dev; > + u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); > + u32 offset; > + u32 val; > + > + reg = (reg >> 6) & 0x7; > + /* Set PCIe Port PHY to disable SSC */ > + /* Debug Xtal Type */ > + val = phy_read(instance, RG_PE1_FRC_H_XTAL_REG); > + val &= ~(RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE); > + val |= RG_PE1_FRC_H_XTAL_TYPE; > + val |= RG_PE1_H_XTAL_TYPE_VAL(0x00); All this will be easier to maintain if regmap reg_field is used instead of using readl/writel directly. > + phy_write(instance, val, RG_PE1_FRC_H_XTAL_REG); > + > + /* disable port */ > + offset = (instance->index != 1) ? > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > + val = phy_read(instance, offset); > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > + val |= RG_PE1_FRC_PHY_EN; > + phy_write(instance, val, offset); > + > + /* Set Pre-divider ratio (for host mode) */ > + val = phy_read(instance, RG_PE1_H_PLL_REG); > + val &= ~(RG_PE1_H_PLL_PREDIV); > + > + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ > + val |= RG_PE1_H_PLL_PREDIV_VAL(0x01); > + phy_write(instance, val, RG_PE1_H_PLL_REG); > + dev_info(dev, "Xtal is 40MHz\n"); > + } else { /* 25MHz | 20MHz Xtal */ > + val |= RG_PE1_H_PLL_PREDIV_VAL(0x00); > + phy_write(instance, val, RG_PE1_H_PLL_REG); > + if (reg >= 6) { > + dev_info(dev, "Xtal is 25MHz\n"); > + > + /* Select feedback clock */ > + val = phy_read(instance, RG_PE1_H_PLL_FBKSEL_REG); > + val &= ~(RG_PE1_H_PLL_FBKSEL); > + val |= RG_PE1_H_PLL_FBKSEL_VAL(0x01); > + phy_write(instance, val, RG_PE1_H_PLL_FBKSEL_REG); > + > + /* DDS NCPO PCW (for host mode) */ > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG); > + val &= ~(RG_PE1_H_LCDDS_SSC_PRD); > + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000); > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG); > + > + /* DDS SSC dither period control */ > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG); > + val &= ~(RG_PE1_H_LCDDS_SSC_PRD); > + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d); > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG); > + > + /* DDS SSC dither amplitude control */ > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_DELTA_REG); > + val &= ~(RG_PE1_H_LCDDS_SSC_DELTA | > + RG_PE1_H_LCDDS_SSC_DELTA1); > + val |= RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a); > + val |= RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a); > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_DELTA_REG); > + } else { > + dev_info(dev, "Xtal is 20MHz\n"); > + } > + } > + > + /* DDS clock inversion */ > + val = phy_read(instance, RG_PE1_LCDDS_CLK_PH_INV_REG); > + val &= ~(RG_PE1_LCDDS_CLK_PH_INV); > + val |= RG_PE1_LCDDS_CLK_PH_INV; > + phy_write(instance, val, RG_PE1_LCDDS_CLK_PH_INV_REG); > + > + /* Set PLL bits */ > + val = phy_read(instance, RG_PE1_H_PLL_REG); > + val &= ~(RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR | > + RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN); > + val |= RG_PE1_H_PLL_BC_VAL(0x02); > + val |= RG_PE1_H_PLL_BP_VAL(0x06); > + val |= RG_PE1_H_PLL_IR_VAL(0x02); > + val |= RG_PE1_H_PLL_IC_VAL(0x01); > + val |= RG_PE1_PLL_DIVEN_VAL(0x02); > + phy_write(instance, val, RG_PE1_H_PLL_REG); > + > + val = phy_read(instance, RG_PE1_H_PLL_BR_REG); > + val &= ~(RG_PE1_H_PLL_BR); > + val |= RG_PE1_H_PLL_BR_VAL(0x00); > + phy_write(instance, val, RG_PE1_H_PLL_BR_REG); > + > + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ > + /* set force mode enable of da_pe1_mstckdiv */ > + val = phy_read(instance, RG_PE1_MSTCKDIV_REG); > + val &= ~(RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV); > + val |= (RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV); > + phy_write(instance, val, RG_PE1_MSTCKDIV_REG); > + } > +} > + > +static int mt7621_pci_phy_init(struct phy *phy) > +{ > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > + struct mt7621_pci_phy *mphy = dev_get_drvdata(phy->dev.parent); > + u32 chip_rev_id = rt_sysc_r32(SYSC_REG_CHIP_REV); > + > + if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2) > + mt7621_bypass_pipe_rst(mphy, instance); > + > + mt7621_set_phy_for_ssc(mphy, instance); > + > + return 0; > +} > + > +static int mt7621_pci_phy_power_on(struct phy *phy) > +{ > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > + u32 offset = (instance->index != 1) ? > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > + u32 val; > + > + /* Enable PHY and disable force mode */ > + val = phy_read(instance, offset); > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > + val |= (RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > + phy_write(instance, val, offset); > + > + return 0; > +} > + > +static int mt7621_pci_phy_power_off(struct phy *phy) > +{ > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > + u32 offset = (instance->index != 1) ? > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > + u32 val; > + > + /* Disable PHY */ > + val = phy_read(instance, offset); > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > + val |= RG_PE1_FRC_PHY_EN; > + phy_write(instance, val, offset); > + > + return 0; > +} > + > +static int mt7621_pci_phy_exit(struct phy *phy) > +{ > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > + > + rt_sysc_m32(PCIE_PORT_CLK_EN(instance->index), 0, RALINK_CLKCFG1); > + > + return 0; > +} > + > +static const struct phy_ops mt7621_pci_phy_ops = { > + .init = mt7621_pci_phy_init, > + .exit = mt7621_pci_phy_exit, > + .power_on = mt7621_pci_phy_power_on, > + .power_off = mt7621_pci_phy_power_off, > + .owner = THIS_MODULE, > +}; > + > +static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev); > + > + if (args->args_count == 0) > + return mt7621_phy->phys[0]->phy; > + > + if (WARN_ON(args->args[0] >= MAX_PHYS)) > + return ERR_PTR(-ENODEV); > + > + return mt7621_phy->phys[args->args[0]]->phy; > +} > + > +static int mt7621_pci_phy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + struct device_node *child_np; > + struct phy_provider *provider; > + struct mt7621_pci_phy *phy; > + struct resource res; > + int port, ret; > + void __iomem *port_base; > + > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); > + if (!phy) > + return -ENOMEM; > + > + phy->nphys = MAX_PHYS; > + phy->phys = devm_kcalloc(dev, phy->nphys, > + sizeof(*phy->phys), GFP_KERNEL); > + if (!phy->phys) > + return -ENOMEM; > + > + phy->dev = dev; > + platform_set_drvdata(pdev, phy); > + > + ret = of_address_to_resource(np, 0, &res); > + if (ret) { > + dev_err(dev, "failed to get address resource(id-%d)\n", port); > + return ret; > + } Use platform_get_resource instead? Thanks Kishon ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] phy: ralink: Add PHY driver for MT7621 PCIe PHY 2019-04-17 5:57 ` Kishon Vijay Abraham I @ 2019-04-17 7:33 ` Sergio Paracuellos 0 siblings, 0 replies; 7+ messages in thread From: Sergio Paracuellos @ 2019-04-17 7:33 UTC (permalink / raw) To: Kishon Vijay Abraham I Cc: linux-kernel, driverdev-devel, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, John Crispin, linux-mips, Rob Herring, NeilBrown Hi Kishon, On Wed, Apr 17, 2019 at 7:58 AM Kishon Vijay Abraham I <kishon@ti.com> wrote: > > Hi, > > On 30/03/19 11:20 AM, Sergio Paracuellos wrote: > > This patch adds a driver for the PCIe PHY of MT7621 SoC. > > > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> > > --- > > drivers/phy/ralink/Kconfig | 7 + > > drivers/phy/ralink/Makefile | 1 + > > drivers/phy/ralink/phy-mt7621-pci.c | 401 ++++++++++++++++++++++++++++ > > 3 files changed, 409 insertions(+) > > create mode 100644 drivers/phy/ralink/phy-mt7621-pci.c > > > > diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig > > index 14fd219535ef..87943a10f210 100644 > > --- a/drivers/phy/ralink/Kconfig > > +++ b/drivers/phy/ralink/Kconfig > > @@ -1,6 +1,13 @@ > > # > > # PHY drivers for Ralink platforms. > > # > > +config PHY_MT7621_PCI > > + tristate "MediaTek MT7621 PCI PHY Driver" > > Shouldn't this be in drivers/phy/mediatek/ then? I am not sure about this, it is mediatek but it only appears on ralink so, I don't know where it should be placed. Maybe Neil has an opinion about this. > > + depends on RALINK && OF > > Add depends on COMPILE_TEST. Will do. > > + select GENERIC_PHY > > + help > > + Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver, > > + > > config PHY_RALINK_USB > > tristate "Ralink USB PHY driver" > > depends on RALINK || COMPILE_TEST > > diff --git a/drivers/phy/ralink/Makefile b/drivers/phy/ralink/Makefile > > index 5c9e326e8757..2052d5649863 100644 > > --- a/drivers/phy/ralink/Makefile > > +++ b/drivers/phy/ralink/Makefile > > @@ -1 +1,2 @@ > > +obj-$(CONFIG_PHY_MT7621_PCI) += phy-mt7621-pci.o > > obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o > > diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c > > new file mode 100644 > > index 000000000000..118302c122ee > > --- /dev/null > > +++ b/drivers/phy/ralink/phy-mt7621-pci.c > > @@ -0,0 +1,401 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Mediatek MT7621 PCI PHY Driver > > + * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com> > > + */ > > + > > +#include <dt-bindings/phy/phy.h> > > +#include <linux/bitops.h> > > +#include <linux/module.h> > > +#include <linux/of_address.h> > > +#include <linux/of_device.h> > > +#include <linux/phy/phy.h> > > +#include <linux/platform_device.h> > > +#include <mt7621.h> > > +#include <ralink_regs.h> > > + > > +#define RALINK_CLKCFG1 0x30 > > +#define CHIP_REV_MT7621_E2 0x0101 > > Is this PHY specific or SoC revision? If it is SoC, we should use > soc_device_attribute and soc_device_match. Depending on revision reset lines are inverted and somebypasses need to be performed to properly initialize the phy. I'll take a look of how this can be done better using soc_device_attribute and soc_device_match as you are pointing out here. > > + > > +#define PCIE_PORT_CLK_EN(x) BIT(24 + (x)) > > + > > +#define RG_PE1_PIPE_REG 0x02c > > +#define RG_PE1_PIPE_RST BIT(12) > > +#define RG_PE1_PIPE_CMD_FRC BIT(4) > > + > > +#define RG_P0_TO_P1_WIDTH 0x100 > > +#define RG_PE1_H_LCDDS_REG 0x49c > > +#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0) > > +#define RG_PE1_H_LCDDS_PCW_VAL(x) ((0x7fffffff & (x)) << 0) > > + > > +#define RG_PE1_FRC_H_XTAL_REG 0x400 > > +#define RG_PE1_FRC_H_XTAL_TYPE BIT(8) > > +#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9) > > +#define RG_PE1_H_XTAL_TYPE_VAL(x) ((0x3 & (x)) << 9) > > + > > +#define RG_PE1_FRC_PHY_REG 0x000 > > +#define RG_PE1_FRC_PHY_EN BIT(4) > > +#define RG_PE1_PHY_EN BIT(5) > > + > > +#define RG_PE1_H_PLL_REG 0x490 > > +#define RG_PE1_H_PLL_BC GENMASK(23, 22) > > +#define RG_PE1_H_PLL_BC_VAL(x) ((0x3 & (x)) << 22) > > +#define RG_PE1_H_PLL_BP GENMASK(21, 18) > > +#define RG_PE1_H_PLL_BP_VAL(x) ((0xf & (x)) << 18) > > +#define RG_PE1_H_PLL_IR GENMASK(15, 12) > > +#define RG_PE1_H_PLL_IR_VAL(x) ((0xf & (x)) << 12) > > +#define RG_PE1_H_PLL_IC GENMASK(11, 8) > > +#define RG_PE1_H_PLL_IC_VAL(x) ((0xf & (x)) << 8) > > +#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6) > > +#define RG_PE1_H_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6) > > +#define RG_PE1_PLL_DIVEN GENMASK(3, 1) > > +#define RG_PE1_PLL_DIVEN_VAL(x) ((0x7 & (x)) << 1) > > + > > +#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc > > +#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4) > > +#define RG_PE1_H_PLL_FBKSEL_VAL(x) ((0x3 & (x)) << 4) > > + > > +#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4 > > +#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0) > > +#define RG_PE1_H_LCDDS_SSC_PRD_VAL(x) ((0xffff & (x)) << 0) > > + > > +#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8 > > +#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0) > > +#define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x) ((0xfff & (x)) << 0) > > +#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16) > > +#define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x) ((0xff & (x)) << 16) > > + > > +#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0 > > +#define RG_PE1_LCDDS_CLK_PH_INV BIT(5) > > + > > +#define RG_PE1_H_PLL_BR_REG 0x4ac > > +#define RG_PE1_H_PLL_BR GENMASK(18, 16) > > +#define RG_PE1_H_PLL_BR_VAL(x) ((0x7 & (x)) << 16) > > + > > +#define RG_PE1_MSTCKDIV_REG 0x414 > > +#define RG_PE1_MSTCKDIV GENMASK(7, 6) > > +#define RG_PE1_MSTCKDIV_VAL(x) ((0x3 & (x)) << 6) > > + > > +#define RG_PE1_FRC_MSTCKDIV BIT(5) > > + > > +#define MAX_PHYS 2 > > + > > +/** > > + * struct mt7621_pci_phy_instance - Mt7621 Pcie PHY device > > + * @phy: pointer to the kernel PHY device > > + * @port_base: base register > > + * @index: internal ID to identify the Mt7621 PCIe PHY > > + */ > > +struct mt7621_pci_phy_instance { > > + struct phy *phy; > > + void __iomem *port_base; > > + u32 index; > > +}; > > + > > +/** > > + * struct mt7621_pci_phy - Mt7621 Pcie PHY core > > + * @dev: pointer to device > > + * @phys: pointer to Mt7621 PHY device > > + * @nphys: number of PHY devices for this core > > + */ > > +struct mt7621_pci_phy { > > + struct device *dev; > > + struct mt7621_pci_phy_instance **phys; > > + int nphys; > > +}; > > + > > +static inline u32 phy_read(struct mt7621_pci_phy_instance *instance, u32 reg) > > +{ > > + return readl(instance->port_base + reg); > > +} > > + > > +static inline void phy_write(struct mt7621_pci_phy_instance *instance, > > + u32 val, u32 reg) > > +{ > > + writel(val, instance->port_base + reg); > > +} > > + > > +static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy, > > + struct mt7621_pci_phy_instance *instance) > > +{ > > + u32 offset = (instance->index != 1) ? > > + RG_PE1_PIPE_REG : RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH; > > + u32 reg; > > + > > + reg = phy_read(instance, offset); > > + reg &= ~(RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC); > > + reg |= (RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC); > > + phy_write(instance, reg, offset); > > +} > > + > > +static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy, > > + struct mt7621_pci_phy_instance *instance) > > +{ > > + struct device *dev = phy->dev; > > + u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); > > + u32 offset; > > + u32 val; > > + > > + reg = (reg >> 6) & 0x7; > > + /* Set PCIe Port PHY to disable SSC */ > > + /* Debug Xtal Type */ > > + val = phy_read(instance, RG_PE1_FRC_H_XTAL_REG); > > + val &= ~(RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE); > > + val |= RG_PE1_FRC_H_XTAL_TYPE; > > + val |= RG_PE1_H_XTAL_TYPE_VAL(0x00); > > All this will be easier to maintain if regmap reg_field is used instead of > using readl/writel directly. I'll take a look of how phy_read and phy_write can be changed to use regmap. > > + phy_write(instance, val, RG_PE1_FRC_H_XTAL_REG); > > + > > + /* disable port */ > > + offset = (instance->index != 1) ? > > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > > + val = phy_read(instance, offset); > > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > > + val |= RG_PE1_FRC_PHY_EN; > > + phy_write(instance, val, offset); > > + > > + /* Set Pre-divider ratio (for host mode) */ > > + val = phy_read(instance, RG_PE1_H_PLL_REG); > > + val &= ~(RG_PE1_H_PLL_PREDIV); > > + > > + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ > > + val |= RG_PE1_H_PLL_PREDIV_VAL(0x01); > > + phy_write(instance, val, RG_PE1_H_PLL_REG); > > + dev_info(dev, "Xtal is 40MHz\n"); > > + } else { /* 25MHz | 20MHz Xtal */ > > + val |= RG_PE1_H_PLL_PREDIV_VAL(0x00); > > + phy_write(instance, val, RG_PE1_H_PLL_REG); > > + if (reg >= 6) { > > + dev_info(dev, "Xtal is 25MHz\n"); > > + > > + /* Select feedback clock */ > > + val = phy_read(instance, RG_PE1_H_PLL_FBKSEL_REG); > > + val &= ~(RG_PE1_H_PLL_FBKSEL); > > + val |= RG_PE1_H_PLL_FBKSEL_VAL(0x01); > > + phy_write(instance, val, RG_PE1_H_PLL_FBKSEL_REG); > > + > > + /* DDS NCPO PCW (for host mode) */ > > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG); > > + val &= ~(RG_PE1_H_LCDDS_SSC_PRD); > > + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000); > > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG); > > + > > + /* DDS SSC dither period control */ > > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_PRD_REG); > > + val &= ~(RG_PE1_H_LCDDS_SSC_PRD); > > + val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d); > > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_PRD_REG); > > + > > + /* DDS SSC dither amplitude control */ > > + val = phy_read(instance, RG_PE1_H_LCDDS_SSC_DELTA_REG); > > + val &= ~(RG_PE1_H_LCDDS_SSC_DELTA | > > + RG_PE1_H_LCDDS_SSC_DELTA1); > > + val |= RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a); > > + val |= RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a); > > + phy_write(instance, val, RG_PE1_H_LCDDS_SSC_DELTA_REG); > > + } else { > > + dev_info(dev, "Xtal is 20MHz\n"); > > + } > > + } > > + > > + /* DDS clock inversion */ > > + val = phy_read(instance, RG_PE1_LCDDS_CLK_PH_INV_REG); > > + val &= ~(RG_PE1_LCDDS_CLK_PH_INV); > > + val |= RG_PE1_LCDDS_CLK_PH_INV; > > + phy_write(instance, val, RG_PE1_LCDDS_CLK_PH_INV_REG); > > + > > + /* Set PLL bits */ > > + val = phy_read(instance, RG_PE1_H_PLL_REG); > > + val &= ~(RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR | > > + RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN); > > + val |= RG_PE1_H_PLL_BC_VAL(0x02); > > + val |= RG_PE1_H_PLL_BP_VAL(0x06); > > + val |= RG_PE1_H_PLL_IR_VAL(0x02); > > + val |= RG_PE1_H_PLL_IC_VAL(0x01); > > + val |= RG_PE1_PLL_DIVEN_VAL(0x02); > > + phy_write(instance, val, RG_PE1_H_PLL_REG); > > + > > + val = phy_read(instance, RG_PE1_H_PLL_BR_REG); > > + val &= ~(RG_PE1_H_PLL_BR); > > + val |= RG_PE1_H_PLL_BR_VAL(0x00); > > + phy_write(instance, val, RG_PE1_H_PLL_BR_REG); > > + > > + if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ > > + /* set force mode enable of da_pe1_mstckdiv */ > > + val = phy_read(instance, RG_PE1_MSTCKDIV_REG); > > + val &= ~(RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV); > > + val |= (RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV); > > + phy_write(instance, val, RG_PE1_MSTCKDIV_REG); > > + } > > +} > > + > > +static int mt7621_pci_phy_init(struct phy *phy) > > +{ > > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > > + struct mt7621_pci_phy *mphy = dev_get_drvdata(phy->dev.parent); > > + u32 chip_rev_id = rt_sysc_r32(SYSC_REG_CHIP_REV); > > + > > + if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2) > > + mt7621_bypass_pipe_rst(mphy, instance); > > + > > + mt7621_set_phy_for_ssc(mphy, instance); > > + > > + return 0; > > +} > > + > > +static int mt7621_pci_phy_power_on(struct phy *phy) > > +{ > > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > > + u32 offset = (instance->index != 1) ? > > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > > + u32 val; > > + > > + /* Enable PHY and disable force mode */ > > + val = phy_read(instance, offset); > > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > > + val |= (RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > > + phy_write(instance, val, offset); > > + > > + return 0; > > +} > > + > > +static int mt7621_pci_phy_power_off(struct phy *phy) > > +{ > > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > > + u32 offset = (instance->index != 1) ? > > + RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH; > > + u32 val; > > + > > + /* Disable PHY */ > > + val = phy_read(instance, offset); > > + val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN); > > + val |= RG_PE1_FRC_PHY_EN; > > + phy_write(instance, val, offset); > > + > > + return 0; > > +} > > + > > +static int mt7621_pci_phy_exit(struct phy *phy) > > +{ > > + struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy); > > + > > + rt_sysc_m32(PCIE_PORT_CLK_EN(instance->index), 0, RALINK_CLKCFG1); > > + > > + return 0; > > +} > > + > > +static const struct phy_ops mt7621_pci_phy_ops = { > > + .init = mt7621_pci_phy_init, > > + .exit = mt7621_pci_phy_exit, > > + .power_on = mt7621_pci_phy_power_on, > > + .power_off = mt7621_pci_phy_power_off, > > + .owner = THIS_MODULE, > > +}; > > + > > +static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev, > > + struct of_phandle_args *args) > > +{ > > + struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev); > > + > > + if (args->args_count == 0) > > + return mt7621_phy->phys[0]->phy; > > + > > + if (WARN_ON(args->args[0] >= MAX_PHYS)) > > + return ERR_PTR(-ENODEV); > > + > > + return mt7621_phy->phys[args->args[0]]->phy; > > +} > > + > > +static int mt7621_pci_phy_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct device_node *np = dev->of_node; > > + struct device_node *child_np; > > + struct phy_provider *provider; > > + struct mt7621_pci_phy *phy; > > + struct resource res; > > + int port, ret; > > + void __iomem *port_base; > > + > > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); > > + if (!phy) > > + return -ENOMEM; > > + > > + phy->nphys = MAX_PHYS; > > + phy->phys = devm_kcalloc(dev, phy->nphys, > > + sizeof(*phy->phys), GFP_KERNEL); > > + if (!phy->phys) > > + return -ENOMEM; > > + > > + phy->dev = dev; > > + platform_set_drvdata(pdev, phy); > > + > > + ret = of_address_to_resource(np, 0, &res); > > + if (ret) { > > + dev_err(dev, "failed to get address resource(id-%d)\n", port); > > + return ret; > > + } > > Use platform_get_resource instead? Ok, I'll change this also to use platform_get_resource. > > Thanks > Kishon Thank you very much for the review. I will post all this changes to staging to be properly tested and resend a v3 with the final result. Best regards, Sergio Paracuellos ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-04-17 7:33 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-03-30 5:50 [PATCH v2 0/2] MT7621 PCIe PHY Sergio Paracuellos 2019-03-30 5:50 ` [PATCH v2 1/2] dt-bindings: phy: Add binding for Mediatek " Sergio Paracuellos 2019-04-06 6:05 ` Rob Herring 2019-03-30 5:50 ` [PATCH v2 2/2] phy: ralink: Add PHY driver for " Sergio Paracuellos 2019-04-13 6:41 ` Sergio Paracuellos 2019-04-17 5:57 ` Kishon Vijay Abraham I 2019-04-17 7:33 ` Sergio Paracuellos
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).