* [PATCH 4.9 01/91] arm64: debug: Dont propagate UNKNOWN FAR into si_code for debug signals
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 02/91] arm64: debug: Ensure debug handlers check triggering exception level Greg Kroah-Hartman
` (94 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Rutland, Will Deacon, Catalin Marinas
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <will.deacon@arm.com>
commit b9a4b9d084d978f80eb9210727c81804588b42ff upstream.
FAR_EL1 is UNKNOWN for all debug exceptions other than those caused by
taking a hardware watchpoint. Unfortunately, if a debug handler returns
a non-zero value, then we will propagate the UNKNOWN FAR value to
userspace via the si_addr field of the SIGTRAP siginfo_t.
Instead, let's set si_addr to take on the PC of the faulting instruction,
which we have available in the current pt_regs.
Cc: <stable@vger.kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/mm/fault.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -673,11 +673,12 @@ void __init hook_debug_fault_code(int nr
debug_fault_info[nr].name = name;
}
-asmlinkage int __exception do_debug_exception(unsigned long addr,
+asmlinkage int __exception do_debug_exception(unsigned long addr_if_watchpoint,
unsigned int esr,
struct pt_regs *regs)
{
const struct fault_info *inf = debug_fault_info + DBG_ESR_EVT(esr);
+ unsigned long pc = instruction_pointer(regs);
struct siginfo info;
int rv;
@@ -688,19 +689,19 @@ asmlinkage int __exception do_debug_exce
if (interrupts_enabled(regs))
trace_hardirqs_off();
- if (user_mode(regs) && instruction_pointer(regs) > TASK_SIZE)
+ if (user_mode(regs) && pc > TASK_SIZE)
arm64_apply_bp_hardening();
- if (!inf->fn(addr, esr, regs)) {
+ if (!inf->fn(addr_if_watchpoint, esr, regs)) {
rv = 1;
} else {
pr_alert("Unhandled debug exception: %s (0x%08x) at 0x%016lx\n",
- inf->name, esr, addr);
+ inf->name, esr, pc);
info.si_signo = inf->sig;
info.si_errno = 0;
info.si_code = inf->code;
- info.si_addr = (void __user *)addr;
+ info.si_addr = (void __user *)pc;
arm64_notify_die("", regs, &info, 0);
rv = 0;
}
^ permalink raw reply [flat|nested] 97+ messages in thread* [PATCH 4.9 02/91] arm64: debug: Ensure debug handlers check triggering exception level
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 01/91] arm64: debug: Dont propagate UNKNOWN FAR into si_code for debug signals Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 03/91] ext4: cleanup bh release code in ext4_ind_remove_space() Greg Kroah-Hartman
` (93 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Rutland, Will Deacon, Catalin Marinas
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <will.deacon@arm.com>
commit 6bd288569b50bc89fa5513031086746968f585cb upstream.
Debug exception handlers may be called for exceptions generated both by
user and kernel code. In many cases, this is checked explicitly, but
in other cases things either happen to work by happy accident or they
go slightly wrong. For example, executing 'brk #4' from userspace will
enter the kprobes code and be ignored, but the instruction will be
retried forever in userspace instead of delivering a SIGTRAP.
Fix this issue in the most stable-friendly fashion by simply adding
explicit checks of the triggering exception level to all of our debug
exception handlers.
Cc: <stable@vger.kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kernel/kgdb.c | 15 ++++++++++++---
arch/arm64/kernel/probes/kprobes.c | 6 ++++++
2 files changed, 18 insertions(+), 3 deletions(-)
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -231,24 +231,33 @@ int kgdb_arch_handle_exception(int excep
static int kgdb_brk_fn(struct pt_regs *regs, unsigned int esr)
{
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
kgdb_handle_exception(1, SIGTRAP, 0, regs);
- return 0;
+ return DBG_HOOK_HANDLED;
}
NOKPROBE_SYMBOL(kgdb_brk_fn)
static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr)
{
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
compiled_break = 1;
kgdb_handle_exception(1, SIGTRAP, 0, regs);
- return 0;
+ return DBG_HOOK_HANDLED;
}
NOKPROBE_SYMBOL(kgdb_compiled_brk_fn);
static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
{
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
kgdb_handle_exception(1, SIGTRAP, 0, regs);
- return 0;
+ return DBG_HOOK_HANDLED;
}
NOKPROBE_SYMBOL(kgdb_step_brk_fn);
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -450,6 +450,9 @@ kprobe_single_step_handler(struct pt_reg
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
int retval;
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
/* return error if this is not our step */
retval = kprobe_ss_hit(kcb, instruction_pointer(regs));
@@ -466,6 +469,9 @@ kprobe_single_step_handler(struct pt_reg
int __kprobes
kprobe_breakpoint_handler(struct pt_regs *regs, unsigned int esr)
{
+ if (user_mode(regs))
+ return DBG_HOOK_ERROR;
+
kprobe_handler(regs);
return DBG_HOOK_HANDLED;
}
^ permalink raw reply [flat|nested] 97+ messages in thread* [PATCH 4.9 03/91] ext4: cleanup bh release code in ext4_ind_remove_space()
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 01/91] arm64: debug: Dont propagate UNKNOWN FAR into si_code for debug signals Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 02/91] arm64: debug: Ensure debug handlers check triggering exception level Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 04/91] lib/int_sqrt: optimize initial value compute Greg Kroah-Hartman
` (92 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, zhangyi (F),
Theodore Tso, Jan Kara, Jari Ruusu
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <yi.zhang@huawei.com>
commit 5e86bdda41534e17621d5a071b294943cae4376e upstream.
Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we
may probably forget to release the buffer some day. This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jari Ruusu <jari.ruusu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/indirect.c | 47 ++++++++++++++++++++++-------------------------
1 file changed, 22 insertions(+), 25 deletions(-)
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -1217,6 +1217,7 @@ int ext4_ind_remove_space(handle_t *hand
ext4_lblk_t offsets[4], offsets2[4];
Indirect chain[4], chain2[4];
Indirect *partial, *partial2;
+ Indirect *p = NULL, *p2 = NULL;
ext4_lblk_t max_block;
__le32 nr = 0, nr2 = 0;
int n = 0, n2 = 0;
@@ -1258,7 +1259,7 @@ int ext4_ind_remove_space(handle_t *hand
}
- partial = ext4_find_shared(inode, n, offsets, chain, &nr);
+ partial = p = ext4_find_shared(inode, n, offsets, chain, &nr);
if (nr) {
if (partial == chain) {
/* Shared branch grows from the inode */
@@ -1283,13 +1284,11 @@ int ext4_ind_remove_space(handle_t *hand
partial->p + 1,
(__le32 *)partial->bh->b_data+addr_per_block,
(chain+n-1) - partial);
- BUFFER_TRACE(partial->bh, "call brelse");
- brelse(partial->bh);
partial--;
}
end_range:
- partial2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
+ partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
if (nr2) {
if (partial2 == chain2) {
/*
@@ -1319,16 +1318,14 @@ end_range:
(__le32 *)partial2->bh->b_data,
partial2->p,
(chain2+n2-1) - partial2);
- BUFFER_TRACE(partial2->bh, "call brelse");
- brelse(partial2->bh);
partial2--;
}
goto do_indirects;
}
/* Punch happened within the same level (n == n2) */
- partial = ext4_find_shared(inode, n, offsets, chain, &nr);
- partial2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
+ partial = p = ext4_find_shared(inode, n, offsets, chain, &nr);
+ partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
/* Free top, but only if partial2 isn't its subtree. */
if (nr) {
@@ -1385,15 +1382,7 @@ end_range:
partial->p + 1,
partial2->p,
(chain+n-1) - partial);
- while (partial > chain) {
- BUFFER_TRACE(partial->bh, "call brelse");
- brelse(partial->bh);
- }
- while (partial2 > chain2) {
- BUFFER_TRACE(partial2->bh, "call brelse");
- brelse(partial2->bh);
- }
- return 0;
+ goto cleanup;
}
/*
@@ -1408,8 +1397,6 @@ end_range:
partial->p + 1,
(__le32 *)partial->bh->b_data+addr_per_block,
(chain+n-1) - partial);
- BUFFER_TRACE(partial->bh, "call brelse");
- brelse(partial->bh);
partial--;
}
if (partial2 > chain2 && depth2 <= depth) {
@@ -1417,11 +1404,21 @@ end_range:
(__le32 *)partial2->bh->b_data,
partial2->p,
(chain2+n2-1) - partial2);
- BUFFER_TRACE(partial2->bh, "call brelse");
- brelse(partial2->bh);
partial2--;
}
}
+
+cleanup:
+ while (p && p > chain) {
+ BUFFER_TRACE(p->bh, "call brelse");
+ brelse(p->bh);
+ p--;
+ }
+ while (p2 && p2 > chain2) {
+ BUFFER_TRACE(p2->bh, "call brelse");
+ brelse(p2->bh);
+ p2--;
+ }
return 0;
do_indirects:
@@ -1429,7 +1426,7 @@ do_indirects:
switch (offsets[0]) {
default:
if (++n >= n2)
- return 0;
+ break;
nr = i_data[EXT4_IND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1);
@@ -1437,7 +1434,7 @@ do_indirects:
}
case EXT4_IND_BLOCK:
if (++n >= n2)
- return 0;
+ break;
nr = i_data[EXT4_DIND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2);
@@ -1445,7 +1442,7 @@ do_indirects:
}
case EXT4_DIND_BLOCK:
if (++n >= n2)
- return 0;
+ break;
nr = i_data[EXT4_TIND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3);
@@ -1454,5 +1451,5 @@ do_indirects:
case EXT4_TIND_BLOCK:
;
}
- return 0;
+ goto cleanup;
}
^ permalink raw reply [flat|nested] 97+ messages in thread* [PATCH 4.9 04/91] lib/int_sqrt: optimize initial value compute
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (2 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 03/91] ext4: cleanup bh release code in ext4_ind_remove_space() Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 05/91] tty/serial: atmel: Add is_half_duplex helper Greg Kroah-Hartman
` (91 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Zijlstra (Intel),
Joe Perches, Will Deacon, Linus Torvalds, Anshul Garg,
Davidlohr Bueso, David Miller, Ingo Molnar, Kees Cook,
Matthew Wilcox, Michael Davidson, Thomas Gleixner, Andrew Morton
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
commit f8ae107eef209bff29a5816bc1aad40d5cd69a80 upstream.
The initial value (@m) compute is:
m = 1UL << (BITS_PER_LONG - 2);
while (m > x)
m >>= 2;
Which is a linear search for the highest even bit smaller or equal to @x
We can implement this using a binary search using __fls() (or better when
its hardware implemented).
m = 1UL << (__fls(x) & ~1UL);
Especially for small values of @x; which are the more common arguments
when doing a CDF on idle times; the linear search is near to worst case,
while the binary search of __fls() is a constant 6 (or 5 on 32bit)
branches.
cycles: branches: branch-misses:
PRE:
hot: 43.633557 +- 0.034373 45.333132 +- 0.002277 0.023529 +- 0.000681
cold: 207.438411 +- 0.125840 45.333132 +- 0.002277 6.976486 +- 0.004219
SOFTWARE FLS:
hot: 29.576176 +- 0.028850 26.666730 +- 0.004511 0.019463 +- 0.000663
cold: 165.947136 +- 0.188406 26.666746 +- 0.004511 6.133897 +- 0.004386
HARDWARE FLS:
hot: 24.720922 +- 0.025161 20.666784 +- 0.004509 0.020836 +- 0.000677
cold: 132.777197 +- 0.127471 20.666776 +- 0.004509 5.080285 +- 0.003874
Averages computed over all values <128k using a LFSR to generate order.
Cold numbers have a LFSR based branch trace buffer 'confuser' ran between
each int_sqrt() invocation.
Link: http://lkml.kernel.org/r/20171020164644.936577234@infradead.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Joe Perches <joe@perches.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Anshul Garg <aksgarg1989@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Michael Davidson <md@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
lib/int_sqrt.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/lib/int_sqrt.c
+++ b/lib/int_sqrt.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/export.h>
+#include <linux/bitops.h>
/**
* int_sqrt - rough approximation to sqrt
@@ -21,10 +22,7 @@ unsigned long int_sqrt(unsigned long x)
if (x <= 1)
return x;
- m = 1UL << (BITS_PER_LONG - 2);
- while (m > x)
- m >>= 2;
-
+ m = 1UL << (__fls(x) & ~1UL);
while (m != 0) {
b = y + m;
y >>= 1;
^ permalink raw reply [flat|nested] 97+ messages in thread* [PATCH 4.9 05/91] tty/serial: atmel: Add is_half_duplex helper
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (3 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 04/91] lib/int_sqrt: optimize initial value compute Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 06/91] tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped Greg Kroah-Hartman
` (90 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Razvan Stefanescu, Richard Genoud
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Razvan Stefanescu <razvan.stefanescu@microchip.com>
commit f3040983132bf3477acd45d2452a906e67c2fec9 upstream.
Use a helper function to check that a port needs to use half duplex
communication, replacing several occurrences of multi-line bit checking.
Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/atmel_serial.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -241,6 +241,12 @@ static inline void atmel_uart_write_char
#endif
+static inline int atmel_uart_is_half_duplex(struct uart_port *port)
+{
+ return (port->rs485.flags & SER_RS485_ENABLED) &&
+ !(port->rs485.flags & SER_RS485_RX_DURING_TX);
+}
+
#ifdef CONFIG_SERIAL_ATMEL_PDC
static bool atmel_use_pdc_rx(struct uart_port *port)
{
@@ -492,9 +498,9 @@ static void atmel_stop_tx(struct uart_po
/* Disable interrupts */
atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
- if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX))
+ if (atmel_uart_is_half_duplex(port))
atmel_start_rx(port);
+
}
/*
@@ -511,8 +517,7 @@ static void atmel_start_tx(struct uart_p
return;
if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port))
- if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX))
+ if (atmel_uart_is_half_duplex(port))
atmel_stop_rx(port);
if (atmel_use_pdc_tx(port))
@@ -809,8 +814,7 @@ static void atmel_complete_tx_dma(void *
*/
if (!uart_circ_empty(xmit))
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
- else if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+ else if (atmel_uart_is_half_duplex(port)) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
@@ -1386,8 +1390,7 @@ static void atmel_tx_pdc(struct uart_por
atmel_uart_writel(port, ATMEL_US_IER,
atmel_port->tx_done_mask);
} else {
- if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+ if (atmel_uart_is_half_duplex(port)) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
^ permalink raw reply [flat|nested] 97+ messages in thread* [PATCH 4.9 06/91] tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (4 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 05/91] tty/serial: atmel: Add is_half_duplex helper Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 07/91] mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified Greg Kroah-Hartman
` (89 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Razvan Stefanescu, Richard Genoud
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Razvan Stefanescu <razvan.stefanescu@microchip.com>
commit 69646d7a3689fbe1a65ae90397d22ac3f1b8d40f upstream.
In half-duplex operation, RX should be started after TX completes.
If DMA is used, there is a case when the DMA transfer completes but the
TX FIFO is not emptied, so the RX cannot be restarted just yet.
Use a boolean variable to store this state and rearm TX interrupt mask
to be signaled again that the transfer finished. In interrupt transmit
handler this variable is used to start RX. A warning message is generated
if RX is activated before TX fifo is cleared.
Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable
RX after TX is done")
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/atmel_serial.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -175,6 +175,8 @@ struct atmel_uart_port {
unsigned int pending_status;
spinlock_t lock_suspended;
+ bool hd_start_rx; /* can start RX during half-duplex operation */
+
int (*prepare_rx)(struct uart_port *port);
int (*prepare_tx)(struct uart_port *port);
void (*schedule_rx)(struct uart_port *port);
@@ -815,8 +817,13 @@ static void atmel_complete_tx_dma(void *
if (!uart_circ_empty(xmit))
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
else if (atmel_uart_is_half_duplex(port)) {
- /* DMA done, stop TX, start RX for RS485 */
- atmel_start_rx(port);
+ /*
+ * DMA done, re-enable TXEMPTY and signal that we can stop
+ * TX and start RX for RS485
+ */
+ atmel_port->hd_start_rx = true;
+ atmel_uart_writel(port, ATMEL_US_IER,
+ atmel_port->tx_done_mask);
}
spin_unlock_irqrestore(&port->lock, flags);
@@ -1261,9 +1268,20 @@ atmel_handle_transmit(struct uart_port *
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (pending & atmel_port->tx_done_mask) {
- /* Either PDC or interrupt transmission */
atmel_uart_writel(port, ATMEL_US_IDR,
atmel_port->tx_done_mask);
+
+ /* Start RX if flag was set and FIFO is empty */
+ if (atmel_port->hd_start_rx) {
+ if (!(atmel_uart_readl(port, ATMEL_US_CSR)
+ & ATMEL_US_TXEMPTY))
+ dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n");
+
+ atmel_port->hd_start_rx = false;
+ atmel_start_rx(port);
+ return;
+ }
+
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
}
}
^ permalink raw reply [flat|nested] 97+ messages in thread* [PATCH 4.9 07/91] mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (5 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 06/91] tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 08/91] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA Greg Kroah-Hartman
` (88 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yang Shi, Oscar Salvador,
Cyril Hrubis, Kirill A. Shutemov, Rafael Aquini, David Rientjes,
Vlastimil Babka, Andrew Morton, Linus Torvalds
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yang Shi <yang.shi@linux.alibaba.com>
commit a7f40cfe3b7ada57af9b62fd28430eeb4a7cfcb7 upstream.
When MPOL_MF_STRICT was specified and an existing page was already on a
node that does not follow the policy, mbind() should return -EIO. But
commit 6f4576e3687b ("mempolicy: apply page table walker on
queue_pages_range()") broke the rule.
And commit c8633798497c ("mm: mempolicy: mbind and migrate_pages support
thp migration") didn't return the correct value for THP mbind() too.
If MPOL_MF_STRICT is set, ignore vma_migratable() to make sure it
reaches queue_pages_to_pte_range() or queue_pages_pmd() to check if an
existing page was already on a node that does not follow the policy.
And, non-migratable vma may be used, return -EIO too if MPOL_MF_MOVE or
MPOL_MF_MOVE_ALL was specified.
Tested with https://github.com/metan-ucw/ltp/blob/master/testcases/kernel/syscalls/mbind/mbind02.c
[akpm@linux-foundation.org: tweak code comment]
Link: http://lkml.kernel.org/r/1553020556-38583-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: 6f4576e3687b ("mempolicy: apply page table walker on queue_pages_range()")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Cyril Hrubis <chrubis@suse.cz>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/mempolicy.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -547,11 +547,16 @@ retry:
goto retry;
}
- migrate_page_add(page, qp->pagelist, flags);
+ if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL)) {
+ if (!vma_migratable(vma))
+ break;
+ migrate_page_add(page, qp->pagelist, flags);
+ } else
+ break;
}
pte_unmap_unlock(pte - 1, ptl);
cond_resched();
- return 0;
+ return addr != end ? -EIO : 0;
}
static int queue_pages_hugetlb(pte_t *pte, unsigned long hmask,
@@ -623,7 +628,12 @@ static int queue_pages_test_walk(unsigne
unsigned long endvma = vma->vm_end;
unsigned long flags = qp->flags;
- if (!vma_migratable(vma))
+ /*
+ * Need check MPOL_MF_STRICT to return -EIO if possible
+ * regardless of vma_migratable
+ */
+ if (!vma_migratable(vma) &&
+ !(flags & MPOL_MF_STRICT))
return 1;
if (endvma > end)
@@ -650,7 +660,7 @@ static int queue_pages_test_walk(unsigne
}
/* queue pages from current vma */
- if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL))
+ if (flags & MPOL_MF_VALID)
return 0;
return 1;
}
^ permalink raw reply [flat|nested] 97+ messages in thread* [PATCH 4.9 08/91] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (6 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 07/91] mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 09/91] CIFS: fix POSIX lock leak and invalid ptr deref Greg Kroah-Hartman
` (87 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jeremy Compostella, Wolfram Sang,
stable, Connor OBrien
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Compostella <jeremy.compostella@intel.com>
commit 89c6efa61f5709327ecfa24bff18e57a4e80c7fa upstream.
On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is
greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes
data out of the msgbuf1 array boundary.
It is possible from a user application to run into that issue by
calling the I2C_SMBUS ioctl with data.block[0] greater than
I2C_SMBUS_BLOCK_MAX + 1.
This patch makes the code compliant with
Documentation/i2c/dev-interface by raising an error when the requested
size is larger than 32 bytes.
Call Trace:
[<ffffffff8139f695>] dump_stack+0x67/0x92
[<ffffffff811802a4>] panic+0xc5/0x1eb
[<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30
[<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320
[<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20
[<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320
[<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0
[<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490
[<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60
[<ffffffff811f7869>] SyS_ioctl+0x79/0x90
[<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
[connoro@google.com: 4.9 backport: adjust filename]
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/i2c-core.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -3250,16 +3250,16 @@ static s32 i2c_smbus_xfer_emulated(struc
the underlying bus driver */
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&adapter->dev, "Invalid block %s size %d\n",
+ read_write == I2C_SMBUS_READ ? "read" : "write",
+ data->block[0]);
+ return -EINVAL;
+ }
if (read_write == I2C_SMBUS_READ) {
msg[1].len = data->block[0];
} else {
msg[0].len = data->block[0] + 1;
- if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
- dev_err(&adapter->dev,
- "Invalid block write size %d\n",
- data->block[0]);
- return -EINVAL;
- }
for (i = 1; i <= data->block[0]; i++)
msgbuf0[i] = data->block[i];
}
^ permalink raw reply [flat|nested] 97+ messages in thread* [PATCH 4.9 09/91] CIFS: fix POSIX lock leak and invalid ptr deref
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (7 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 08/91] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 10/91] h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- Greg Kroah-Hartman
` (86 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aurelien Aptel, NeilBrown,
Steve French, Pavel Shilovsky, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bc31d0cdcfbadb6258b45db97e93b1c83822ba33 ]
We have a customer reporting crashes in lock_get_status() with many
"Leaked POSIX lock" messages preceeding the crash.
Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709
Leaked POSIX lock on dev=0x0:0x4b ino...
Leaked locks on dev=0x0:0x4b ino=0xf911400000029:
POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592
stack segment: 0000 [#1] SMP
Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
Supported: Yes
CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000
RIP: 0010:[<ffffffff8125dcab>] [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0
RSP: 0018:ffff88c74005fd90 EFLAGS: 00010202
RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50
RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae
RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff
R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340
R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340
FS: 00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18
ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340
ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28
Call Trace:
[<ffffffff8125e08f>] locks_show+0x2f/0x70
[<ffffffff81230ad1>] seq_read+0x251/0x3a0
[<ffffffff81275bbc>] proc_reg_read+0x3c/0x70
[<ffffffff8120e456>] __vfs_read+0x26/0x140
[<ffffffff8120e9da>] vfs_read+0x7a/0x120
[<ffffffff8120faf2>] SyS_read+0x42/0xa0
[<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7
When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls
filp_close() which also removes all posix locks.
The lock struct is initialized like so in filp_close() and passed
down to cifs
...
lock.fl_type = F_UNLCK;
lock.fl_flags = FL_POSIX | FL_CLOSE;
lock.fl_start = 0;
lock.fl_end = OFFSET_MAX;
...
Note the FL_CLOSE flag, which hints the VFS code that this unlocking
is done for closing the fd.
filp_close()
locks_remove_posix(filp, id);
vfs_lock_file(filp, F_SETLK, &lock, NULL);
return filp->f_op->lock(filp, cmd, fl) => cifs_lock()
rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid);
rc = server->ops->mand_unlock_range(cfile, flock, xid);
if (flock->fl_flags & FL_POSIX && !rc)
rc = locks_lock_file_wait(file, flock)
Notice how we don't call locks_lock_file_wait() which does the
generic VFS lock/unlock/wait work on the inode if rc != 0.
If we are closing the handle, the SMB server is supposed to remove any
locks associated with it. Similarly, cifs.ko frees and wakes up any
lock and lock waiter when closing the file:
cifs_close()
cifsFileInfo_put(file->private_data)
/*
* Delete any outstanding lock records. We'll lose them when the file
* is closed anyway.
*/
down_write(&cifsi->lock_sem);
list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) {
list_del(&li->llist);
cifs_del_lock_waiters(li);
kfree(li);
}
list_del(&cifs_file->llist->llist);
kfree(cifs_file->llist);
up_write(&cifsi->lock_sem);
So we can safely ignore unlocking failures in cifs_lock() if they
happen with the FL_CLOSE flag hint set as both the server and the
client take care of it during the actual closing.
This is not a proper fix for the unlocking failure but it's safe and
it seems to prevent the lock leakages and crashes the customer
experiences.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/file.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 1c5099fffaec..7d295bf283ca 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1627,8 +1627,20 @@ cifs_setlk(struct file *file, struct file_lock *flock, __u32 type,
rc = server->ops->mand_unlock_range(cfile, flock, xid);
out:
- if (flock->fl_flags & FL_POSIX && !rc)
+ if (flock->fl_flags & FL_POSIX) {
+ /*
+ * If this is a request to remove all locks because we
+ * are closing the file, it doesn't matter if the
+ * unlocking failed as both cifs.ko and the SMB server
+ * remove the lock on file close
+ */
+ if (rc) {
+ cifs_dbg(VFS, "%s failed rc=%d\n", __func__, rc);
+ if (!(flock->fl_flags & FL_CLOSE))
+ return rc;
+ }
rc = locks_lock_file_wait(file, flock);
+ }
return rc;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 10/91] h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux-
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (8 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 09/91] CIFS: fix POSIX lock leak and invalid ptr deref Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 11/91] tracing: kdb: Fix ftdump to not sleep Greg Kroah-Hartman
` (85 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fc2b47b55f17fd996f7a01975ce1c33c2f2513f6 ]
It believe it is a bad idea to hardcode a specific compiler prefix
that may or may not be installed on a user's system. It is annoying
when testing features that should not require compilers at all.
For example, mrproper, headers_install, etc. should work without
any compiler.
They look like follows on my machine.
$ make ARCH=h8300 mrproper
./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found
./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found
make: h8300-unknown-linux-gcc: Command not found
make: h8300-unknown-linux-gcc: Command not found
[ a bunch of the same error messages continue ]
$ make ARCH=h8300 headers_install
./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found
./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found
make: h8300-unknown-linux-gcc: Command not found
HOSTCC scripts/basic/fixdep
make: h8300-unknown-linux-gcc: Command not found
WRAP arch/h8300/include/generated/uapi/asm/kvm_para.h
[ snip ]
The solution is to delete this line, or to use cc-cross-prefix like
some architectures do. I chose the latter as a moderate fixup.
I added an alternative 'h8300-linux-' because it is available at:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/h8300/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index e1c02ca230cb..073bba6f9f60 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -23,7 +23,7 @@ KBUILD_AFLAGS += $(aflags-y)
LDFLAGS += $(ldflags-y)
ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := h8300-unknown-linux-
+CROSS_COMPILE := $(call cc-cross-prefix, h8300-unknown-linux- h8300-linux-)
endif
core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 11/91] tracing: kdb: Fix ftdump to not sleep
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (9 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 10/91] h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 12/91] gpio: gpio-omap: fix level interrupt idling Greg Kroah-Hartman
` (84 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian Norris, Douglas Anderson,
Steven Rostedt (VMware),
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 31b265b3baaf55f209229888b7ffea523ddab366 ]
As reported back in 2016-11 [1], the "ftdump" kdb command triggers a
BUG for "sleeping function called from invalid context".
kdb's "ftdump" command wants to call ring_buffer_read_prepare() in
atomic context. A very simple solution for this is to add allocation
flags to ring_buffer_read_prepare() so kdb can call it without
triggering the allocation error. This patch does that.
Note that in the original email thread about this, it was suggested
that perhaps the solution for kdb was to either preallocate the buffer
ahead of time or create our own iterator. I'm hoping that this
alternative of adding allocation flags to ring_buffer_read_prepare()
can be considered since it means I don't need to duplicate more of the
core trace code into "trace_kdb.c" (for either creating my own
iterator or re-preparing a ring allocator whose memory was already
allocated).
NOTE: another option for kdb is to actually figure out how to make it
reuse the existing ftrace_dump() function and totally eliminate the
duplication. This sounds very appealing and actually works (the "sr
z" command can be seen to properly dump the ftrace buffer). The
downside here is that ftrace_dump() fully consumes the trace buffer.
Unless that is changed I'd rather not use it because it means "ftdump
| grep xyz" won't be very useful to search the ftrace buffer since it
will throw away the whole trace on the first grep. A future patch to
dump only the last few lines of the buffer will also be hard to
implement.
[1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com
Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.org
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/ring_buffer.h | 2 +-
kernel/trace/ring_buffer.c | 5 +++--
kernel/trace/trace.c | 6 ++++--
kernel/trace/trace_kdb.c | 6 ++++--
4 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 19d0778ec382..121c8f99ecdd 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -125,7 +125,7 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts,
unsigned long *lost_events);
struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu);
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu, gfp_t flags);
void ring_buffer_read_prepare_sync(void);
void ring_buffer_read_start(struct ring_buffer_iter *iter);
void ring_buffer_read_finish(struct ring_buffer_iter *iter);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index f316e90ad538..5473dcaaca8d 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -4037,6 +4037,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
* ring_buffer_read_prepare - Prepare for a non consuming read of the buffer
* @buffer: The ring buffer to read from
* @cpu: The cpu buffer to iterate over
+ * @flags: gfp flags to use for memory allocation
*
* This performs the initial preparations necessary to iterate
* through the buffer. Memory is allocated, buffer recording
@@ -4054,7 +4055,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
* This overall must be paired with ring_buffer_read_finish.
*/
struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu, gfp_t flags)
{
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_iter *iter;
@@ -4062,7 +4063,7 @@ ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return NULL;
- iter = kmalloc(sizeof(*iter), GFP_KERNEL);
+ iter = kmalloc(sizeof(*iter), flags);
if (!iter)
return NULL;
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index f18dedf9195e..d4773939c054 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3449,7 +3449,8 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
if (iter->cpu_file == RING_BUFFER_ALL_CPUS) {
for_each_tracing_cpu(cpu) {
iter->buffer_iter[cpu] =
- ring_buffer_read_prepare(iter->trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter->trace_buffer->buffer,
+ cpu, GFP_KERNEL);
}
ring_buffer_read_prepare_sync();
for_each_tracing_cpu(cpu) {
@@ -3459,7 +3460,8 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
} else {
cpu = iter->cpu_file;
iter->buffer_iter[cpu] =
- ring_buffer_read_prepare(iter->trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter->trace_buffer->buffer,
+ cpu, GFP_KERNEL);
ring_buffer_read_prepare_sync();
ring_buffer_read_start(iter->buffer_iter[cpu]);
tracing_iter_reset(iter, cpu);
diff --git a/kernel/trace/trace_kdb.c b/kernel/trace/trace_kdb.c
index 57149bce6aad..896458285fdd 100644
--- a/kernel/trace/trace_kdb.c
+++ b/kernel/trace/trace_kdb.c
@@ -50,14 +50,16 @@ static void ftrace_dump_buf(int skip_lines, long cpu_file)
if (cpu_file == RING_BUFFER_ALL_CPUS) {
for_each_tracing_cpu(cpu) {
iter.buffer_iter[cpu] =
- ring_buffer_read_prepare(iter.trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter.trace_buffer->buffer,
+ cpu, GFP_ATOMIC);
ring_buffer_read_start(iter.buffer_iter[cpu]);
tracing_iter_reset(&iter, cpu);
}
} else {
iter.cpu_file = cpu_file;
iter.buffer_iter[cpu_file] =
- ring_buffer_read_prepare(iter.trace_buffer->buffer, cpu_file);
+ ring_buffer_read_prepare(iter.trace_buffer->buffer,
+ cpu_file, GFP_ATOMIC);
ring_buffer_read_start(iter.buffer_iter[cpu_file]);
tracing_iter_reset(&iter, cpu_file);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 12/91] gpio: gpio-omap: fix level interrupt idling
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (10 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 11/91] tracing: kdb: Fix ftdump to not sleep Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 13/91] include/linux/relay.h: fix percpu annotation in struct rchan Greg Kroah-Hartman
` (83 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aaro Koskinen, Keerthy,
Peter Ujfalusi, Russell King, Tony Lindgren, Grygorii Strashko,
Linus Walleij, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d01849f7deba81f4959fd9e51bf20dbf46987d1c ]
Tony notes that the GPIO module does not idle when level interrupts are
in use, as the wakeup appears to get stuck.
After extensive investigation, it appears that the wakeup will only be
cleared if the interrupt status register is cleared while the interrupt
is enabled. However, we are currently clearing it with the interrupt
disabled for level-based interrupts.
It is acknowledged that this observed behaviour conflicts with a
statement in the TRM:
CAUTION
After servicing the interrupt, the status bit in the interrupt status
register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be
reset and the interrupt line released (by setting the corresponding
bit of the interrupt status register to 1) before enabling an
interrupt for the GPIO channel in the interrupt-enable register
(GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent
the occurrence of unexpected interrupts when enabling an interrupt
for the GPIO channel.
However, this does not appear to be a practical problem.
Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>,
the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP:
Fix the sequence to clear the IRQ status" saying:
if the status is cleared after disabling the IRQ then sWAKEUP will not
be cleared and gates the module transition
When we unmask the level interrupt after the interrupt has been handled,
enable the interrupt and only then clear the interrupt. If the interrupt
is still pending, the hardware will re-assert the interrupt status.
Should the caution note in the TRM prove to be a problem, we could
use a clear-enable-clear sequence instead.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: updated comments based on an earlier TI patch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-omap.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 6f9c9ac6ee70..75f30a0c418a 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -837,14 +837,16 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
if (trigger)
omap_set_gpio_triggering(bank, offset, trigger);
- /* For level-triggered GPIOs, the clearing must be done after
- * the HW source is cleared, thus after the handler has run */
- if (bank->level_mask & BIT(offset)) {
- omap_set_gpio_irqenable(bank, offset, 0);
+ omap_set_gpio_irqenable(bank, offset, 1);
+
+ /*
+ * For level-triggered GPIOs, clearing must be done after the source
+ * is cleared, thus after the handler has run. OMAP4 needs this done
+ * after enabing the interrupt to clear the wakeup status.
+ */
+ if (bank->level_mask & BIT(offset))
omap_clear_gpio_irqstatus(bank, offset);
- }
- omap_set_gpio_irqenable(bank, offset, 1);
raw_spin_unlock_irqrestore(&bank->lock, flags);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 13/91] include/linux/relay.h: fix percpu annotation in struct rchan
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (11 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 12/91] gpio: gpio-omap: fix level interrupt idling Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 14/91] sysctl: handle overflow for file-max Greg Kroah-Hartman
` (82 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Luc Van Oostenryck, Jens Axboe,
Thomas Gleixner, Andrew Morton, Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 62461ac2e5b6520b6d65fc6d7d7b4b8df4b848d8 ]
The percpu member of this structure is declared as:
struct ... ** __percpu member;
So its type is:
__percpu pointer to pointer to struct ...
But looking at how it's used, its type should be:
pointer to __percpu pointer to struct ...
and it should thus be declared as:
struct ... * __percpu *member;
So fix the placement of '__percpu' in the definition of this
structures.
This silents a few Sparse's warnings like:
warning: incorrect type in initializer (different address spaces)
expected void const [noderef] <asn:3> *__vpp_verify
got struct sched_domain **
Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com
Fixes: 017c59c042d01 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/relay.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/relay.h b/include/linux/relay.h
index 68c1448e56bb..2560f8706408 100644
--- a/include/linux/relay.h
+++ b/include/linux/relay.h
@@ -65,7 +65,7 @@ struct rchan
struct kref kref; /* channel refcount */
void *private_data; /* for user-defined data */
size_t last_toobig; /* tried to log event > subbuf size */
- struct rchan_buf ** __percpu buf; /* per-cpu channel buffers */
+ struct rchan_buf * __percpu *buf; /* per-cpu channel buffers */
int is_global; /* One global buffer ? */
struct list_head list; /* for channel list */
struct dentry *parent; /* parent dentry passed to open */
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 14/91] sysctl: handle overflow for file-max
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (12 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 13/91] include/linux/relay.h: fix percpu annotation in struct rchan Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.9 15/91] enic: fix build warning without CONFIG_CPUMASK_OFFSTACK Greg Kroah-Hartman
` (81 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian Brauner, Kees Cook,
Alexey Dobriyan, Al Viro, Dominik Brodowski, Eric W. Biederman,
Joe Lawrence, Luis Chamberlain, Waiman Long, Andrew Morton,
Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 32a5ad9c22852e6bd9e74bdec5934ef9d1480bc5 ]
Currently, when writing
echo 18446744073709551616 > /proc/sys/fs/file-max
/proc/sys/fs/file-max will overflow and be set to 0. That quickly
crashes the system.
This commit sets the max and min value for file-max. The max value is
set to long int. Any higher value cannot currently be used as the
percpu counters are long ints and not unsigned integers.
Note that the file-max value is ultimately parsed via
__do_proc_doulongvec_minmax(). This function does not report error when
min or max are exceeded. Which means if a value largen that long int is
written userspace will not receive an error instead the old value will be
kept. There is an argument to be made that this should be changed and
__do_proc_doulongvec_minmax() should return an error when a dedicated min
or max value are exceeded. However this has the potential to break
userspace so let's defer this to an RFC patch.
Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Waiman Long <longman@redhat.com>
[christian@brauner.io: v4]
Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.io
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sysctl.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index efd340a510a9..5515d578095b 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -125,6 +125,7 @@ static int __maybe_unused one = 1;
static int __maybe_unused two = 2;
static int __maybe_unused four = 4;
static unsigned long one_ul = 1;
+static unsigned long long_max = LONG_MAX;
static int one_hundred = 100;
static int one_thousand = 1000;
#ifdef CONFIG_PRINTK
@@ -1682,6 +1683,8 @@ static struct ctl_table fs_table[] = {
.maxlen = sizeof(files_stat.max_files),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
+ .extra1 = &zero,
+ .extra2 = &long_max,
},
{
.procname = "nr_open",
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 15/91] enic: fix build warning without CONFIG_CPUMASK_OFFSTACK
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (13 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 14/91] sysctl: handle overflow for file-max Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 16/91] scsi: hisi_sas: Set PHY linkrate when disconnected Greg Kroah-Hartman
` (80 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Nathan Chancellor,
David S. Miller, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 43d281662fdb46750d49417559b71069f435298d ]
The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to
dynamically allocate a struct member, but this is normally intended for
local variables.
Building with clang, I get a warning for a few locations that check the
address of the cpumask_var_t:
drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
As far as I can tell, the code is still correct, as the truth value of
the pointer is what we need in this configuration. To get rid of
the warning, use cpumask_available() instead of checking the
pointer directly.
Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 89acf7bc4cf9..b73d9ba9496c 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -120,7 +120,7 @@ static void enic_init_affinity_hint(struct enic *enic)
for (i = 0; i < enic->intr_count; i++) {
if (enic_is_err_intr(enic, i) || enic_is_notify_intr(enic, i) ||
- (enic->msix[i].affinity_mask &&
+ (cpumask_available(enic->msix[i].affinity_mask) &&
!cpumask_empty(enic->msix[i].affinity_mask)))
continue;
if (zalloc_cpumask_var(&enic->msix[i].affinity_mask,
@@ -149,7 +149,7 @@ static void enic_set_affinity_hint(struct enic *enic)
for (i = 0; i < enic->intr_count; i++) {
if (enic_is_err_intr(enic, i) ||
enic_is_notify_intr(enic, i) ||
- !enic->msix[i].affinity_mask ||
+ !cpumask_available(enic->msix[i].affinity_mask) ||
cpumask_empty(enic->msix[i].affinity_mask))
continue;
err = irq_set_affinity_hint(enic->msix_entry[i].vector,
@@ -162,7 +162,7 @@ static void enic_set_affinity_hint(struct enic *enic)
for (i = 0; i < enic->wq_count; i++) {
int wq_intr = enic_msix_wq_intr(enic, i);
- if (enic->msix[wq_intr].affinity_mask &&
+ if (cpumask_available(enic->msix[wq_intr].affinity_mask) &&
!cpumask_empty(enic->msix[wq_intr].affinity_mask))
netif_set_xps_queue(enic->netdev,
enic->msix[wq_intr].affinity_mask,
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 16/91] scsi: hisi_sas: Set PHY linkrate when disconnected
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (14 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.9 15/91] enic: fix build warning without CONFIG_CPUMASK_OFFSTACK Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 17/91] mm/cma.c: cma_declare_contiguous: correct err handling Greg Kroah-Hartman
` (79 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, John Garry, Martin K. Petersen, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit efdcad62e7b8a02fcccc5ccca57806dce1482ac8 ]
When the PHY comes down, we currently do not set the negotiated linkrate:
root@(none)$ pwd
/sys/class/sas_phy/phy-0:0
root@(none)$ more enable
1
root@(none)$ more negotiated_linkrate
12.0 Gbit
root@(none)$ echo 0 > enable
root@(none)$ more negotiated_linkrate
12.0 Gbit
root@(none)$
This patch fixes the driver code to set it properly when the PHY comes
down.
If the PHY had been enabled, then set unknown; otherwise, flag as disabled.
The logical place to set the negotiated linkrate for this scenario is PHY
down routine, which is called from the PHY down ISR.
However, it is not possible to know if the PHY comes down due to PHY
disable or loss of link, as sas_phy.enabled member is not set until after
the transport disable routine is complete, which races with the PHY down
ISR.
As an imperfect solution, use sas_phy_data.enable as the flag to know if
the PHY is down due to disable. It's imperfect, as sas_phy_data is internal
to libsas.
I can't see another way without adding a new field to hisi_sas_phy and
managing it, or changing SCSI SAS transport.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 2f872f784e10..5252dd5d3f4b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -10,6 +10,7 @@
*/
#include "hisi_sas.h"
+#include "../libsas/sas_internal.h"
#define DRV_NAME "hisi_sas"
#define DEV_IS_GONE(dev) \
@@ -1128,9 +1129,18 @@ static void hisi_sas_port_deformed(struct asd_sas_phy *sas_phy)
static void hisi_sas_phy_disconnected(struct hisi_sas_phy *phy)
{
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_phy *sphy = sas_phy->phy;
+ struct sas_phy_data *d = sphy->hostdata;
+
phy->phy_attached = 0;
phy->phy_type = 0;
phy->port = NULL;
+
+ if (d->enable)
+ sphy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+ else
+ sphy->negotiated_linkrate = SAS_PHY_DISABLED;
}
void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 17/91] mm/cma.c: cma_declare_contiguous: correct err handling
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (15 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 16/91] scsi: hisi_sas: Set PHY linkrate when disconnected Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 18/91] mm/page_ext.c: fix an imbalance with kmemleak Greg Kroah-Hartman
` (78 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peng Fan, Catalin Marinas,
Mike Rapoport, Laura Abbott, Joonsoo Kim, Michal Hocko,
Vlastimil Babka, Marek Szyprowski, Andrey Konovalov,
Andrew Morton, Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0d3bd18a5efd66097ef58622b898d3139790aa9d ]
In case cma_init_reserved_mem failed, need to free the memblock
allocated by memblock_reserve or memblock_alloc_range.
Quote Catalin's comments:
https://lkml.org/lkml/2019/2/26/482
Kmemleak is supposed to work with the memblock_{alloc,free} pair and it
ignores the memblock_reserve() as a memblock_alloc() implementation
detail. It is, however, tolerant to memblock_free() being called on
a sub-range or just a different range from a previous memblock_alloc().
So the original patch looks fine to me. FWIW:
Link: http://lkml.kernel.org/r/20190227144631.16708-1-peng.fan@nxp.com
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/cma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/mm/cma.c b/mm/cma.c
index 397687fc51f9..b5d8847497a3 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -339,12 +339,14 @@ int __init cma_declare_contiguous(phys_addr_t base,
ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma);
if (ret)
- goto err;
+ goto free_mem;
pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
&base);
return 0;
+free_mem:
+ memblock_free(base, size);
err:
pr_err("Failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
return ret;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 18/91] mm/page_ext.c: fix an imbalance with kmemleak
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (16 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 17/91] mm/cma.c: cma_declare_contiguous: correct err handling Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 19/91] mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512! Greg Kroah-Hartman
` (77 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Catalin Marinas,
Andrew Morton, Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0c81585499601acd1d0e1cbf424cabfaee60628c ]
After offlining a memory block, kmemleak scan will trigger a crash, as
it encounters a page ext address that has already been freed during
memory offlining. At the beginning in alloc_page_ext(), it calls
kmemleak_alloc(), but it does not call kmemleak_free() in
free_page_ext().
BUG: unable to handle kernel paging request at ffff888453d00000
PGD 128a01067 P4D 128a01067 PUD 128a04067 PMD 47e09e067 PTE 800ffffbac2ff060
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 1 PID: 1594 Comm: bash Not tainted 5.0.0-rc8+ #15
Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017
RIP: 0010:scan_block+0xb5/0x290
Code: 85 6e 01 00 00 48 b8 00 00 30 f5 81 88 ff ff 48 39 c3 0f 84 5b 01 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 0f 85 87 01 00 00 <4c> 8b 3b e8 f3 0c fa ff 4c 39 3d 0c 6b 4c 01 0f 87 08 01 00 00 4c
RSP: 0018:ffff8881ec57f8e0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffff888453d00000 RCX: ffffffffa61e5a54
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff888453d00000
RBP: ffff8881ec57f920 R08: fffffbfff4ed588d R09: fffffbfff4ed588c
R10: fffffbfff4ed588c R11: ffffffffa76ac463 R12: dffffc0000000000
R13: ffff888453d00ff9 R14: ffff8881f80cef48 R15: ffff8881f80cef48
FS: 00007f6c0e3f8740(0000) GS:ffff8881f7680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888453d00000 CR3: 00000001c4244003 CR4: 00000000001606a0
Call Trace:
scan_gray_list+0x269/0x430
kmemleak_scan+0x5a8/0x10f0
kmemleak_write+0x541/0x6ca
full_proxy_write+0xf8/0x190
__vfs_write+0xeb/0x980
vfs_write+0x15a/0x4f0
ksys_write+0xd2/0x1b0
__x64_sys_write+0x73/0xb0
do_syscall_64+0xeb/0xaaa
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f6c0dad73b8
Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 63 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
RSP: 002b:00007ffd5b863cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f6c0dad73b8
RDX: 0000000000000005 RSI: 000055a9216e1710 RDI: 0000000000000001
RBP: 000055a9216e1710 R08: 000000000000000a R09: 00007ffd5b863840
R10: 000000000000000a R11: 0000000000000246 R12: 00007f6c0dda9780
R13: 0000000000000005 R14: 00007f6c0dda4740 R15: 0000000000000005
Modules linked in: nls_iso8859_1 nls_cp437 vfat fat kvm_intel kvm irqbypass efivars ip_tables x_tables xfs sd_mod ahci libahci igb i2c_algo_bit libata i2c_core dm_mirror dm_region_hash dm_log dm_mod efivarfs
CR2: ffff888453d00000
---[ end trace ccf646c7456717c5 ]---
Kernel panic - not syncing: Fatal exception
Shutting down cpus with NMI
Kernel Offset: 0x24c00000 from 0xffffffff81000000 (relocation range:
0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
Link: http://lkml.kernel.org/r/20190227173147.75650-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/page_ext.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/mm/page_ext.c b/mm/page_ext.c
index 121dcffc4ec1..a7be1c7a79f6 100644
--- a/mm/page_ext.c
+++ b/mm/page_ext.c
@@ -286,6 +286,7 @@ static void free_page_ext(void *addr)
table_size = get_entry_size() * PAGES_PER_SECTION;
BUG_ON(PageReserved(page));
+ kmemleak_free(addr);
free_pages_exact(addr, table_size);
}
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 19/91] mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512!
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (17 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 18/91] mm/page_ext.c: fix an imbalance with kmemleak Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 20/91] mm/slab.c: kmemleak no scan alien caches Greg Kroah-Hartman
` (76 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Uladzislau Rezki (Sony),
Andrew Morton, Ingo Molnar, Joel Fernandes, Matthew Wilcox,
Michal Hocko, Oleksiy Avramchenko, Steven Rostedt, Tejun Heo,
Thomas Garnier, Thomas Gleixner, Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit afd07389d3f4933c7f7817a92fb5e053d59a3182 ]
One of the vmalloc stress test case triggers the kernel BUG():
<snip>
[60.562151] ------------[ cut here ]------------
[60.562154] kernel BUG at mm/vmalloc.c:512!
[60.562206] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[60.562247] CPU: 0 PID: 430 Comm: vmalloc_test/0 Not tainted 4.20.0+ #161
[60.562293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[60.562351] RIP: 0010:alloc_vmap_area+0x36f/0x390
<snip>
it can happen due to big align request resulting in overflowing of
calculated address, i.e. it becomes 0 after ALIGN()'s fixup.
Fix it by checking if calculated address is within vstart/vend range.
Link: http://lkml.kernel.org/r/20190124115648.9433-2-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/vmalloc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index e6aa073f01df..73afe460caf0 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -459,7 +459,11 @@ nocache:
}
found:
- if (addr + size > vend)
+ /*
+ * Check also calculated address against the vstart,
+ * because it can be 0 because of big align request.
+ */
+ if (addr + size > vend || addr < vstart)
goto overflow;
va->va_start = addr;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 20/91] mm/slab.c: kmemleak no scan alien caches
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (18 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 19/91] mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512! Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 21/91] ocfs2: fix a panic problem caused by o2cb_ctl Greg Kroah-Hartman
` (75 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Andrew Morton,
Christoph Lameter, Pekka Enberg, David Rientjes, Joonsoo Kim,
Catalin Marinas, Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 92d1d07daad65c300c7d0b68bbef8867e9895d54 ]
Kmemleak throws endless warnings during boot due to in
__alloc_alien_cache(),
alc = kmalloc_node(memsize, gfp, node);
init_arraycache(&alc->ac, entries, batch);
kmemleak_no_scan(ac);
Kmemleak does not track the array cache (alc->ac) but the alien cache
(alc) instead, so let it track the latter by lifting kmemleak_no_scan()
out of init_arraycache().
There is another place that calls init_arraycache(), but
alloc_kmem_cache_cpus() uses the percpu allocation where will never be
considered as a leak.
kmemleak: Found object by alias at 0xffff8007b9aa7e38
CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2
Call trace:
dump_backtrace+0x0/0x168
show_stack+0x24/0x30
dump_stack+0x88/0xb0
lookup_object+0x84/0xac
find_and_get_object+0x84/0xe4
kmemleak_no_scan+0x74/0xf4
setup_kmem_cache_node+0x2b4/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
ret_from_fork+0x10/0x18
kmemleak: Object 0xffff8007b9aa7e00 (size 256):
kmemleak: comm "swapper/0", pid 1, jiffies 4294697137
kmemleak: min_count = 1
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
kmemleak_alloc+0x84/0xb8
kmem_cache_alloc_node_trace+0x31c/0x3a0
__kmalloc_node+0x58/0x78
setup_kmem_cache_node+0x26c/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
kmemleak: Not scanning unknown object at 0xffff8007b9aa7e38
CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2
Call trace:
dump_backtrace+0x0/0x168
show_stack+0x24/0x30
dump_stack+0x88/0xb0
kmemleak_no_scan+0x90/0xf4
setup_kmem_cache_node+0x2b4/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
ret_from_fork+0x10/0x18
Link: http://lkml.kernel.org/r/20190129184518.39808-1-cai@lca.pw
Fixes: 1fe00d50a9e8 ("slab: factor out initialization of array cache")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/slab.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/mm/slab.c b/mm/slab.c
index 354a09deecff..d2c0499c6b15 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -566,14 +566,6 @@ static void start_cpu_timer(int cpu)
static void init_arraycache(struct array_cache *ac, int limit, int batch)
{
- /*
- * The array_cache structures contain pointers to free object.
- * However, when such objects are allocated or transferred to another
- * cache the pointers are not cleared and they could be counted as
- * valid references during a kmemleak scan. Therefore, kmemleak must
- * not scan such objects.
- */
- kmemleak_no_scan(ac);
if (ac) {
ac->avail = 0;
ac->limit = limit;
@@ -589,6 +581,14 @@ static struct array_cache *alloc_arraycache(int node, int entries,
struct array_cache *ac = NULL;
ac = kmalloc_node(memsize, gfp, node);
+ /*
+ * The array_cache structures contain pointers to free object.
+ * However, when such objects are allocated or transferred to another
+ * cache the pointers are not cleared and they could be counted as
+ * valid references during a kmemleak scan. Therefore, kmemleak must
+ * not scan such objects.
+ */
+ kmemleak_no_scan(ac);
init_arraycache(ac, entries, batchcount);
return ac;
}
@@ -683,6 +683,7 @@ static struct alien_cache *__alloc_alien_cache(int node, int entries,
alc = kmalloc_node(memsize, gfp, node);
if (alc) {
+ kmemleak_no_scan(alc);
init_arraycache(&alc->ac, entries, batch);
spin_lock_init(&alc->lock);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 21/91] ocfs2: fix a panic problem caused by o2cb_ctl
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (19 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 20/91] mm/slab.c: kmemleak no scan alien caches Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 22/91] f2fs: do not use mutex lock in atomic context Greg Kroah-Hartman
` (74 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jia Guo, Joseph Qi, Jun Piao,
Mark Fasheh, Joel Becker, Junxiao Bi, Changwei Ge, Andrew Morton,
Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cc725ef3cb202ef2019a3c67c8913efa05c3cce6 ]
In the process of creating a node, it will cause NULL pointer
dereference in kernel if o2cb_ctl failed in the interval (mkdir,
o2cb_set_node_attribute(node_num)] in function o2cb_add_node.
The node num is initialized to 0 in function o2nm_node_group_make_item,
o2nm_node_group_drop_item will mistake the node number 0 for a valid
node number when we delete the node before the node number is set
correctly. If the local node number of the current host happens to be
0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while
o2hb_thread still running. The panic stack is generated as follows:
o2hb_thread
\-o2hb_do_disk_heartbeat
\-o2hb_check_own_slot
|-slot = ®->hr_slots[o2nm_this_node()];
//o2nm_this_node() return O2NM_INVALID_NODE_NUM
We need to check whether the node number is set when we delete the node.
Link: http://lkml.kernel.org/r/133d8045-72cc-863e-8eae-5013f9f6bc51@huawei.com
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ocfs2/cluster/nodemanager.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index c204ac9b49e5..81a0d5d82757 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -621,13 +621,15 @@ static void o2nm_node_group_drop_item(struct config_group *group,
struct o2nm_node *node = to_o2nm_node(item);
struct o2nm_cluster *cluster = to_o2nm_cluster(group->cg_item.ci_parent);
- o2net_disconnect_node(node);
+ if (cluster->cl_nodes[node->nd_num] == node) {
+ o2net_disconnect_node(node);
- if (cluster->cl_has_local &&
- (cluster->cl_local_node == node->nd_num)) {
- cluster->cl_has_local = 0;
- cluster->cl_local_node = O2NM_INVALID_NODE_NUM;
- o2net_stop_listening(node);
+ if (cluster->cl_has_local &&
+ (cluster->cl_local_node == node->nd_num)) {
+ cluster->cl_has_local = 0;
+ cluster->cl_local_node = O2NM_INVALID_NODE_NUM;
+ o2net_stop_listening(node);
+ }
}
/* XXX call into net to stop this node from trading messages */
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 22/91] f2fs: do not use mutex lock in atomic context
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (20 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 21/91] ocfs2: fix a panic problem caused by o2cb_ctl Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 23/91] fs/file.c: initialize init_files.resize_wait Greg Kroah-Hartman
` (73 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sahitya Tummala, Chao Yu,
Jaegeuk Kim, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9083977dabf3833298ddcd40dee28687f1e6b483 ]
Fix below warning coming because of using mutex lock in atomic context.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:98
in_atomic(): 1, irqs_disabled(): 0, pid: 585, name: sh
Preemption disabled at: __radix_tree_preload+0x28/0x130
Call trace:
dump_backtrace+0x0/0x2b4
show_stack+0x20/0x28
dump_stack+0xa8/0xe0
___might_sleep+0x144/0x194
__might_sleep+0x58/0x8c
mutex_lock+0x2c/0x48
f2fs_trace_pid+0x88/0x14c
f2fs_set_node_page_dirty+0xd0/0x184
Do not use f2fs_radix_tree_insert() to avoid doing cond_resched() with
spin_lock() acquired.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/trace.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/trace.c b/fs/f2fs/trace.c
index 73b4e1d1912a..501c283761d2 100644
--- a/fs/f2fs/trace.c
+++ b/fs/f2fs/trace.c
@@ -61,6 +61,7 @@ void f2fs_trace_pid(struct page *page)
page->private = pid;
+retry:
if (radix_tree_preload(GFP_NOFS))
return;
@@ -71,7 +72,12 @@ void f2fs_trace_pid(struct page *page)
if (p)
radix_tree_delete(&pids, pid);
- f2fs_radix_tree_insert(&pids, pid, current);
+ if (radix_tree_insert(&pids, pid, current)) {
+ spin_unlock(&pids_lock);
+ radix_tree_preload_end();
+ cond_resched();
+ goto retry;
+ }
trace_printk("%3x:%3x %4x %-16s\n",
MAJOR(inode->i_sb->s_dev), MINOR(inode->i_sb->s_dev),
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 23/91] fs/file.c: initialize init_files.resize_wait
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (21 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 22/91] f2fs: do not use mutex lock in atomic context Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 24/91] cifs: use correct format characters Greg Kroah-Hartman
` (72 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Richard Zhang, Andrew Morton,
Al Viro, Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5704a06810682683355624923547b41540e2801a ]
(Taken from https://bugzilla.kernel.org/show_bug.cgi?id=200647)
'get_unused_fd_flags' in kthread cause kernel crash. It works fine on
4.1, but causes crash after get 64 fds. It also cause crash on
ubuntu1404/1604/1804, centos7.5, and the crash messages are almost the
same.
The crash message on centos7.5 shows below:
start fd 61
start fd 62
start fd 63
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: __wake_up_common+0x2e/0x90
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: test(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter devlink sunrpc kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg ppdev pcspkr virtio_balloon parport_pc parport i2c_piix4 joydev ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi virtio_scsi virtio_console virtio_net cirrus drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm crct10dif_pclmul crct10dif_common crc32c_intel drm ata_piix serio_raw libata virtio_pci virtio_ring i2c_core
virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CPU: 2 PID: 1820 Comm: test_fd Kdump: loaded Tainted: G OE ------------ 3.10.0-862.3.3.el7.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
task: ffff8e92b9431fa0 ti: ffff8e94247a0000 task.ti: ffff8e94247a0000
RIP: 0010:__wake_up_common+0x2e/0x90
RSP: 0018:ffff8e94247a2d18 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffffffff9d09daa0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffff9d09daa0
RBP: ffff8e94247a2d50 R08: 0000000000000000 R09: ffff8e92b95dfda8
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9d09daa8
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8e9434e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000017c686000 CR4: 00000000000207e0
Call Trace:
__wake_up+0x39/0x50
expand_files+0x131/0x250
__alloc_fd+0x47/0x170
get_unused_fd_flags+0x30/0x40
test_fd+0x12a/0x1c0 [test]
kthread+0xd1/0xe0
ret_from_fork_nospec_begin+0x21/0x21
Code: 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 54 49 89 fc 49 83 c4 08 53 48 83 ec 10 48 8b 47 08 89 55 cc 4c 89 45 d0 <48> 8b 08 49 39 c4 48 8d 78 e8 4c 8d 69 e8 75 08 eb 3b 4c 89 ef
RIP __wake_up_common+0x2e/0x90
RSP <ffff8e94247a2d18>
CR2: 0000000000000000
This issue exists since CentOS 7.5 3.10.0-862 and CentOS 7.4
(3.10.0-693.21.1 ) is ok. Root cause: the item 'resize_wait' is not
initialized before being used.
Reported-by: Richard Zhang <zhang.zijian@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/file.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/file.c b/fs/file.c
index 69d6990e3021..09aac4d4729b 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -475,6 +475,7 @@ struct files_struct init_files = {
.full_fds_bits = init_files.full_fds_bits_init,
},
.file_lock = __SPIN_LOCK_UNLOCKED(init_files.file_lock),
+ .resize_wait = __WAIT_QUEUE_HEAD_INITIALIZER(init_files.resize_wait),
};
static unsigned int find_next_fd(struct fdtable *fdt, unsigned int start)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 24/91] cifs: use correct format characters
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (22 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 23/91] fs/file.c: initialize init_files.resize_wait Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 25/91] dm thin: add sanity checks to thin-pool and external snapshot creation Greg Kroah-Hartman
` (71 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Louis Taylor, Steve French,
Nick Desaulniers, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 259594bea574e515a148171b5cd84ce5cbdc028a ]
When compiling with -Wformat, clang emits the following warnings:
fs/cifs/smb1ops.c:312:20: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
tgt_total_cnt, total_in_tgt);
^~~~~~~~~~~~
fs/cifs/cifs_dfs_ref.c:289:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->flags, ref->server_type);
^~~~~~~~~~
fs/cifs/cifs_dfs_ref.c:289:16: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->flags, ref->server_type);
^~~~~~~~~~~~~~~~
fs/cifs/cifs_dfs_ref.c:291:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->ref_flag, ref->path_consumed);
^~~~~~~~~~~~~
fs/cifs/cifs_dfs_ref.c:291:19: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->ref_flag, ref->path_consumed);
^~~~~~~~~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for ints and unsigned
ints.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/cifs_dfs_ref.c | 4 ++--
fs/cifs/smb1ops.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 9156be545b0f..4660208132a2 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -271,9 +271,9 @@ static void dump_referral(const struct dfs_info3_param *ref)
{
cifs_dbg(FYI, "DFS: ref path: %s\n", ref->path_name);
cifs_dbg(FYI, "DFS: node path: %s\n", ref->node_name);
- cifs_dbg(FYI, "DFS: fl: %hd, srv_type: %hd\n",
+ cifs_dbg(FYI, "DFS: fl: %d, srv_type: %d\n",
ref->flags, ref->server_type);
- cifs_dbg(FYI, "DFS: ref_flags: %hd, path_consumed: %hd\n",
+ cifs_dbg(FYI, "DFS: ref_flags: %d, path_consumed: %d\n",
ref->ref_flag, ref->path_consumed);
}
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index efd72e1fae74..f7a9adab0b84 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -305,7 +305,7 @@ coalesce_t2(char *second_buf, struct smb_hdr *target_hdr)
remaining = tgt_total_cnt - total_in_tgt;
if (remaining < 0) {
- cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%hu\n",
+ cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%u\n",
tgt_total_cnt, total_in_tgt);
return -EPROTO;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 25/91] dm thin: add sanity checks to thin-pool and external snapshot creation
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (23 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 24/91] cifs: use correct format characters Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 26/91] cifs: Fix NULL pointer dereference of devname Greg Kroah-Hartman
` (70 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Cai (Xiang Feng),
Mike Snitzer, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 70de2cbda8a5d788284469e755f8b097d339c240 ]
Invoking dm_get_device() twice on the same device path with different
modes is dangerous. Because in that case, upgrade_mode() will alloc a
new 'dm_dev' and free the old one, which may be referenced by a previous
caller. Dereferencing the dangling pointer will trigger kernel NULL
pointer dereference.
The following two cases can reproduce this issue. Actually, they are
invalid setups that must be disallowed, e.g.:
1. Creating a thin-pool with read_only mode, and the same device as
both metadata and data.
dmsetup create thinp --table \
"0 41943040 thin-pool /dev/vdb /dev/vdb 128 0 1 read_only"
BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
...
Call Trace:
new_read+0xfb/0x110 [dm_bufio]
dm_bm_read_lock+0x43/0x190 [dm_persistent_data]
? kmem_cache_alloc_trace+0x15c/0x1e0
__create_persistent_data_objects+0x65/0x3e0 [dm_thin_pool]
dm_pool_metadata_open+0x8c/0xf0 [dm_thin_pool]
pool_ctr.cold.79+0x213/0x913 [dm_thin_pool]
? realloc_argv+0x50/0x70 [dm_mod]
dm_table_add_target+0x14e/0x330 [dm_mod]
table_load+0x122/0x2e0 [dm_mod]
? dev_status+0x40/0x40 [dm_mod]
ctl_ioctl+0x1aa/0x3e0 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
do_vfs_ioctl+0xa2/0x600
? handle_mm_fault+0xda/0x200
? __do_page_fault+0x26c/0x4f0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
2. Creating a external snapshot using the same thin-pool device.
dmsetup create thinp --table \
"0 41943040 thin-pool /dev/vdc /dev/vdb 128 0 2 ignore_discard"
dmsetup message /dev/mapper/thinp 0 "create_thin 0"
dmsetup create snap --table \
"0 204800 thin /dev/mapper/thinp 0 /dev/mapper/thinp"
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
Call Trace:
? __alloc_pages_nodemask+0x13c/0x2e0
retrieve_status+0xa5/0x1f0 [dm_mod]
? dm_get_live_or_inactive_table.isra.7+0x20/0x20 [dm_mod]
table_status+0x61/0xa0 [dm_mod]
ctl_ioctl+0x1aa/0x3e0 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
do_vfs_ioctl+0xa2/0x600
ksys_ioctl+0x60/0x90
? ksys_write+0x4f/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/dm-thin.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 345f4d81ba07..23a7e108352a 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -3295,6 +3295,13 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
as.argc = argc;
as.argv = argv;
+ /* make sure metadata and data are different devices */
+ if (!strcmp(argv[0], argv[1])) {
+ ti->error = "Error setting metadata or data device";
+ r = -EINVAL;
+ goto out_unlock;
+ }
+
/*
* Set default pool features.
*/
@@ -4177,6 +4184,12 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv)
tc->sort_bio_list = RB_ROOT;
if (argc == 3) {
+ if (!strcmp(argv[0], argv[2])) {
+ ti->error = "Error setting origin device";
+ r = -EINVAL;
+ goto bad_origin_dev;
+ }
+
r = dm_get_device(ti, argv[2], FMODE_READ, &origin_dev);
if (r) {
ti->error = "Error opening origin device";
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 26/91] cifs: Fix NULL pointer dereference of devname
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (24 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 25/91] dm thin: add sanity checks to thin-pool and external snapshot creation Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 27/91] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes Greg Kroah-Hartman
` (69 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yao Liu, Steve French, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 68e2672f8fbd1e04982b8d2798dd318bf2515dd2 ]
There is a NULL pointer dereference of devname in strspn()
The oops looks something like:
CIFS: Attempting to mount (null)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:strspn+0x0/0x50
...
Call Trace:
? cifs_parse_mount_options+0x222/0x1710 [cifs]
? cifs_get_volume_info+0x2f/0x80 [cifs]
cifs_setup_volume_info+0x20/0x190 [cifs]
cifs_get_volume_info+0x50/0x80 [cifs]
cifs_smb3_do_mount+0x59/0x630 [cifs]
? ida_alloc_range+0x34b/0x3d0
cifs_do_mount+0x11/0x20 [cifs]
mount_fs+0x52/0x170
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix this by adding a NULL check on devname in cifs_parse_devname()
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/connect.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 33e65b71c49a..f291ed0c155d 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1201,6 +1201,11 @@ cifs_parse_devname(const char *devname, struct smb_vol *vol)
const char *delims = "/\\";
size_t len;
+ if (unlikely(!devname || !*devname)) {
+ cifs_dbg(VFS, "Device name not specified.\n");
+ return -EINVAL;
+ }
+
/* make sure we have a valid UNC double delimiter prefix */
len = strspn(devname, delims);
if (len != 2)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 27/91] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (25 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 26/91] cifs: Fix NULL pointer dereference of devname Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 28/91] jbd2: fix invalid descriptor block checksum Greg Kroah-Hartman
` (68 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Slavomir Kaslev,
Steven Rostedt (VMware),
Linus Torvalds, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ee5e001196d1345b8fee25925ff5f1d67936081e ]
The current implementation of splice() and tee() ignores O_NONBLOCK set
on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for
blocking on pipe arguments. This is inconsistent since splice()-ing
from/to non-pipe file descriptors does take O_NONBLOCK into
consideration.
Fix this by promoting O_NONBLOCK, when set on a pipe, to
SPLICE_F_NONBLOCK.
Some context for how the current implementation of splice() leads to
inconsistent behavior. In the ongoing work[1] to add VM tracing
capability to trace-cmd we stream tracing data over named FIFOs or
vsockets from guests back to the host.
When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on
the input file descriptor and set SPLICE_F_NONBLOCK for the next call to
splice(). If splice() was blocked waiting on data from the input FIFO,
after SIGINT splice() restarts with the same arguments (no
SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no
data is available.
This differs from the splice() behavior when reading from a vsocket or
when we're doing a traditional read()/write() loop (trace-cmd's
--nosplice argument).
With this patch applied we get the same behavior in all situations after
setting O_NONBLOCK which also matches the behavior of doing a
read()/write() loop instead of splice().
This change does have potential of breaking users who don't expect
EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs
that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2].
[1] https://github.com/skaslev/trace-cmd/tree/vsock
[2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425
Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/splice.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/fs/splice.c b/fs/splice.c
index 01983bea760c..3f9e7a724d85 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1137,6 +1137,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
if (ipipe == opipe)
return -EINVAL;
+ if ((in->f_flags | out->f_flags) & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
return splice_pipe_to_pipe(ipipe, opipe, len, flags);
}
@@ -1162,6 +1165,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
if (unlikely(ret < 0))
return ret;
+ if (in->f_flags & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
file_start_write(out);
ret = do_splice_from(ipipe, out, &offset, len, flags);
file_end_write(out);
@@ -1186,6 +1192,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
offset = in->f_pos;
}
+ if (out->f_flags & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
pipe_lock(opipe);
ret = wait_for_space(opipe, flags);
if (!ret)
@@ -1718,6 +1727,9 @@ static long do_tee(struct file *in, struct file *out, size_t len,
* copying the data.
*/
if (ipipe && opipe && ipipe != opipe) {
+ if ((in->f_flags | out->f_flags) & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
/*
* Keep going, unless we encounter an error. The ipipe/opipe
* ordering doesn't really matter.
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 28/91] jbd2: fix invalid descriptor block checksum
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (26 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 27/91] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 29/91] fs: fix guard_bio_eod to check for real EOD errors Greg Kroah-Hartman
` (67 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, luojiajun, Theodore Tso, Jan Kara,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6e876c3dd205d30b0db6850e97a03d75457df007 ]
In jbd2_journal_commit_transaction(), if we are in abort mode,
we may flush the buffer without setting descriptor block checksum
by goto start_journal_io. Then fs is mounted,
jbd2_descriptor_block_csum_verify() failed.
[ 271.379811] EXT4-fs (vdd): shut down requested (2)
[ 271.381827] Aborting journal on device vdd-8.
[ 271.597136] JBD2: Invalid checksum recovering block 22199 in log
[ 271.598023] JBD2: recovery failed
[ 271.598484] EXT4-fs (vdd): error loading journal
Fix this problem by keep setting descriptor block checksum if the
descriptor buffer is not NULL.
This checksum problem can be reproduced by xfstests generic/388.
Signed-off-by: luojiajun <luojiajun3@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jbd2/commit.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 31f8ca046639..10ec27676191 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -700,9 +700,11 @@ void jbd2_journal_commit_transaction(journal_t *journal)
the last tag we set up. */
tag->t_flags |= cpu_to_be16(JBD2_FLAG_LAST_TAG);
-
- jbd2_descriptor_block_csum_set(journal, descriptor);
start_journal_io:
+ if (descriptor)
+ jbd2_descriptor_block_csum_set(journal,
+ descriptor);
+
for (i = 0; i < bufs; i++) {
struct buffer_head *bh = wbuf[i];
/*
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 29/91] fs: fix guard_bio_eod to check for real EOD errors
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (27 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 28/91] jbd2: fix invalid descriptor block checksum Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 30/91] tools lib traceevent: Fix buffer overflow in arg_eval Greg Kroah-Hartman
` (66 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ming Lei, Carlos Maiolino,
Jens Axboe, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit dce30ca9e3b676fb288c33c1f4725a0621361185 ]
guard_bio_eod() can truncate a segment in bio to allow it to do IO on
odd last sectors of a device.
It already checks if the IO starts past EOD, but it does not consider
the possibility of an IO request starting within device boundaries can
contain more than one segment past EOD.
In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will
underflow bvec->bv_len.
Fix this by checking if truncated_bytes is lower than PAGE_SIZE.
This situation has been found on filesystems such as isofs and vfat,
which doesn't check the device size before mount, if the device is
smaller than the filesystem itself, a readahead on such filesystem,
which spans EOD, can trigger this situation, leading a call to
zero_user() with a wrong size possibly corrupting memory.
I didn't see any crash, or didn't let the system run long enough to
check if memory corruption will be hit somewhere, but adding
instrumentation to guard_bio_end() to check truncated_bytes size, was
enough to see the error.
The following script can trigger the error.
MNT=/mnt
IMG=./DISK.img
DEV=/dev/loop0
mkfs.vfat $IMG
mount $IMG $MNT
cp -R /etc $MNT &> /dev/null
umount $MNT
losetup -D
losetup --find --show --sizelimit 16247280 $IMG
mount $DEV $MNT
find $MNT -type f -exec cat {} + >/dev/null
Kudos to Eric Sandeen for coming up with the reproducer above
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/buffer.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/buffer.c b/fs/buffer.c
index e0d46d47e358..a89be9741d12 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -3041,6 +3041,13 @@ void guard_bio_eod(int op, struct bio *bio)
/* Uhhuh. We've got a bio that straddles the device size! */
truncated_bytes = bio->bi_iter.bi_size - (maxsector << 9);
+ /*
+ * The bio contains more than one segment which spans EOD, just return
+ * and let IO layer turn it into an EIO
+ */
+ if (truncated_bytes > bvec->bv_len)
+ return;
+
/* Truncate the bio.. */
bio->bi_iter.bi_size -= truncated_bytes;
bvec->bv_len -= truncated_bytes;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 30/91] tools lib traceevent: Fix buffer overflow in arg_eval
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (28 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 29/91] fs: fix guard_bio_eod to check for real EOD errors Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 31/91] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Greg Kroah-Hartman
` (65 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Sartain, Mathias Krause,
Tony Jones, Steven Rostedt (VMware),
Frederic Weisbecker, Arnaldo Carvalho de Melo, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7c5b019e3a638a5a290b0ec020f6ca83d2ec2aaa ]
Fix buffer overflow observed when running perf test.
The overflow is when trying to evaluate "1ULL << (64 - 1)" which is
resulting in -9223372036854775808 which overflows the 20 character
buffer.
If is possible this bug has been reported before but I still don't see
any fix checked in:
See: https://www.spinics.net/lists/linux-perf-users/msg07714.html
Reported-by: Michael Sartain <mikesart@fastmail.com>
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/20190228015532.8941-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/traceevent/event-parse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 669475300ba8..700c74b0aed0 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -2428,7 +2428,7 @@ static int arg_num_eval(struct print_arg *arg, long long *val)
static char *arg_eval (struct print_arg *arg)
{
long long val;
- static char buf[20];
+ static char buf[24];
switch (arg->type) {
case PRINT_ATOM:
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 31/91] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (29 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 30/91] tools lib traceevent: Fix buffer overflow in arg_eval Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 32/91] crypto: crypto4xx - add missing of_node_put after of_device_is_available Greg Kroah-Hartman
` (64 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexei Avshalom Lazar, Maya Erez,
Kalle Valo, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit de77a53c2d1e8fb3621e63e8e1f0f0c9a1a99ff7 ]
ies1 or ies2 might be null when code inside
_wil_cfg80211_merge_extra_ies access them.
Add explicit check for null and make sure ies1/ies2 are not
accessed in such a case.
spos might be null and be accessed inside
_wil_cfg80211_merge_extra_ies.
Add explicit check for null in the while condition statement
and make sure spos is not accessed in such a case.
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index d117240d9a73..b8eeaef17edc 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1005,6 +1005,12 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
u8 *buf, *dpos;
const u8 *spos;
+ if (!ies1)
+ ies1_len = 0;
+
+ if (!ies2)
+ ies2_len = 0;
+
if (ies1_len == 0 && ies2_len == 0) {
*merged_ies = NULL;
*merged_len = 0;
@@ -1014,17 +1020,19 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
buf = kmalloc(ies1_len + ies2_len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- memcpy(buf, ies1, ies1_len);
+ if (ies1)
+ memcpy(buf, ies1, ies1_len);
dpos = buf + ies1_len;
spos = ies2;
- while (spos + 1 < ies2 + ies2_len) {
+ while (spos && (spos + 1 < ies2 + ies2_len)) {
/* IE tag at offset 0, length at offset 1 */
u16 ielen = 2 + spos[1];
if (spos + ielen > ies2 + ies2_len)
break;
if (spos[0] == WLAN_EID_VENDOR_SPECIFIC &&
- !_wil_cfg80211_find_ie(ies1, ies1_len, spos, ielen)) {
+ (!ies1 || !_wil_cfg80211_find_ie(ies1, ies1_len,
+ spos, ielen))) {
memcpy(dpos, spos, ielen);
dpos += ielen;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 32/91] crypto: crypto4xx - add missing of_node_put after of_device_is_available
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (30 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 31/91] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 33/91] usb: chipidea: Grab the (legacy) USB PHY by phandle first Greg Kroah-Hartman
` (63 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Julia Lawall, Herbert Xu, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8c2b43d2d85b48a97d2f8279278a4aac5b45f925 ]
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: 5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/amcc/crypto4xx_trng.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/amcc/crypto4xx_trng.c b/drivers/crypto/amcc/crypto4xx_trng.c
index 677ca17fd223..368c5599515e 100644
--- a/drivers/crypto/amcc/crypto4xx_trng.c
+++ b/drivers/crypto/amcc/crypto4xx_trng.c
@@ -80,8 +80,10 @@ void ppc4xx_trng_probe(struct crypto4xx_core_device *core_dev)
/* Find the TRNG device node and map it */
trng = of_find_matching_node(NULL, ppc4xx_trng_match);
- if (!trng || !of_device_is_available(trng))
+ if (!trng || !of_device_is_available(trng)) {
+ of_node_put(trng);
return;
+ }
dev->trng_base = of_iomap(trng, 0);
of_node_put(trng);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 33/91] usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (31 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 32/91] crypto: crypto4xx - add missing of_node_put after of_device_is_available Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 34/91] scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c Greg Kroah-Hartman
` (62 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Kocialkowski, Peter Chen, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 68ef236274793066b9ba3154b16c0acc1c891e5c ]
According to the chipidea driver bindings, the USB PHY is specified via
the "phys" phandle node. However, this only takes effect for USB PHYs
that use the common PHY framework. For legacy USB PHYs, a simple lookup
based on the USB PHY type is done instead.
This does not play out well when more than one USB PHY is registered,
since the first registered PHY matching the type will always be
returned regardless of what the driver was bound to.
Fix this by looking up the PHY based on the "phys" phandle node.
Although generic PHYs are rather matched by their "phys-name" and not
the "phys" phandle directly, there is no helper for similar lookup on
legacy PHYs and it's probably not worth the effort to add it.
When no legacy USB PHY is found by phandle, fallback to grabbing any
registered USB2 PHY. This ensures backward compatibility if some users
were actually relying on this mechanism.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/chipidea/core.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 64c6af2c8559..e96e3a5808b3 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -901,8 +901,15 @@ static int ci_hdrc_probe(struct platform_device *pdev)
} else if (ci->platdata->usb_phy) {
ci->usb_phy = ci->platdata->usb_phy;
} else {
+ ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
+ 0);
ci->phy = devm_phy_get(dev->parent, "usb-phy");
- ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2);
+
+ /* Fallback to grabbing any registered USB2 PHY */
+ if (IS_ERR(ci->usb_phy) &&
+ PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
+ ci->usb_phy = devm_usb_get_phy(dev->parent,
+ USB_PHY_TYPE_USB2);
/* if both generic PHY and USB PHY layers aren't enabled */
if (PTR_ERR(ci->phy) == -ENOSYS &&
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 34/91] scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (32 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 33/91] usb: chipidea: Grab the (legacy) USB PHY by phandle first Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 35/91] coresight: etm4x: Add support to enable ETMv4.2 Greg Kroah-Hartman
` (61 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Benjamin Block, Bart Van Assche,
Martin K. Petersen, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1749ef00f7312679f76d5e9104c5d1e22a829038 ]
We had a test-report where, under memory pressure, adding LUNs to the
systems would fail (the tests add LUNs strictly in sequence):
[ 5525.853432] scsi 0:0:1:1088045124: Direct-Access IBM 2107900 .148 PQ: 0 ANSI: 5
[ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS
[ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43
[ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0
[ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection
[ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off
[ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08
[ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5525.857838] sdk: sdk1
[ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk
[ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds
[ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
[ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
Looking at the code of scsi_alloc_sdev(), and all the calling contexts,
there seems to be no reason to use GFP_ATMOIC here. All the different
call-contexts use a mutex at some point, and nothing in between that
requires no sleeping, as far as I could see. Additionally, the code that
later allocates the block queue for the device (scsi_mq_alloc_queue())
already uses GFP_KERNEL.
There are similar allocations in two other functions:
scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with
GFP_KERNEL.
Here is the contexts for the three functions so far:
scsi_alloc_sdev()
scsi_probe_and_add_lun()
scsi_sequential_lun_scan()
__scsi_scan_target()
scsi_scan_target()
mutex_lock()
scsi_scan_channel()
scsi_scan_host_selected()
mutex_lock()
scsi_report_lun_scan()
__scsi_scan_target()
...
__scsi_add_device()
mutex_lock()
__scsi_scan_target()
...
scsi_report_lun_scan()
...
scsi_get_host_dev()
mutex_lock()
scsi_probe_and_add_lun()
...
scsi_add_lun()
scsi_probe_and_add_lun()
...
So replace all these, and give them a bit of a better chance to succeed,
with more chances of reclaim.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_scan.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 27a6d3c6cb7c..67f6f134abc4 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -219,7 +219,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
- GFP_ATOMIC);
+ GFP_KERNEL);
if (!sdev)
goto out;
@@ -796,7 +796,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
*/
sdev->inquiry = kmemdup(inq_result,
max_t(size_t, sdev->inquiry_len, 36),
- GFP_ATOMIC);
+ GFP_KERNEL);
if (sdev->inquiry == NULL)
return SCSI_SCAN_NO_RESPONSE;
@@ -1095,7 +1095,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
if (!sdev)
goto out;
- result = kmalloc(result_len, GFP_ATOMIC |
+ result = kmalloc(result_len, GFP_KERNEL |
((shost->unchecked_isa_dma) ? __GFP_DMA : 0));
if (!result)
goto out_free_sdev;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 35/91] coresight: etm4x: Add support to enable ETMv4.2
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (33 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 34/91] scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 36/91] ARM: 8840/1: use a raw_spinlock_t in unwind Greg Kroah-Hartman
` (60 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sai Prakash Ranjan, Suzuki K Poulose,
Mathieu Poirier, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5666dfd1d8a45a167f0d8b4ef47ea7f780b1f24a ]
SDM845 has ETMv4.2 and can use the existing etm4x driver.
But the current etm driver checks only for ETMv4.0 and
errors out for other etm4x versions. This patch adds this
missing support to enable SoC's with ETMv4x to use same
driver by checking only the ETM architecture major version
number.
Without this change, we get below error during etm probe:
/ # dmesg | grep etm
[ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22
[ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22
[ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22
[ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22
[ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22
[ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22
[ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22
[ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22
With this change, etm probe is successful:
/ # dmesg | grep etm
[ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized
[ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized
[ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized
[ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized
[ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized
[ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized
[ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized
[ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 4db8d6a4d0cb..da27f8edba50 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -61,7 +61,8 @@ static void etm4_os_unlock(struct etmv4_drvdata *drvdata)
static bool etm4_arch_supported(u8 arch)
{
- switch (arch) {
+ /* Mask out the minor version number */
+ switch (arch & 0xf0) {
case ETM_ARCH_V4:
break;
default:
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 36/91] ARM: 8840/1: use a raw_spinlock_t in unwind
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (34 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 35/91] coresight: etm4x: Add support to enable ETMv4.2 Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 37/91] iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tables Greg Kroah-Hartman
` (59 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sebastian Andrzej Siewior,
Russell King, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 74ffe79ae538283bbf7c155e62339f1e5c87b55a ]
Mostly unwind is done with irqs enabled however SLUB may call it with
irqs disabled while creating a new SLUB cache.
I had system freeze while loading a module which called
kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled
interrupts and then
->new_slab_objects()
->new_slab()
->setup_object()
->setup_object_debug()
->init_tracking()
->set_track()
->save_stack_trace()
->save_stack_trace_tsk()
->walk_stackframe()
->unwind_frame()
->unwind_find_idx()
=>spin_lock_irqsave(&unwind_lock);
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/kernel/unwind.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 0bee233fef9a..314cfb232a63 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -93,7 +93,7 @@ extern const struct unwind_idx __start_unwind_idx[];
static const struct unwind_idx *__origin_unwind_idx;
extern const struct unwind_idx __stop_unwind_idx[];
-static DEFINE_SPINLOCK(unwind_lock);
+static DEFINE_RAW_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);
/* Convert a prel31 symbol to an absolute address */
@@ -201,7 +201,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
/* module unwind tables */
struct unwind_table *table;
- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_for_each_entry(table, &unwind_tables, list) {
if (addr >= table->begin_addr &&
addr < table->end_addr) {
@@ -213,7 +213,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
break;
}
}
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);
}
pr_debug("%s: idx = %p\n", __func__, idx);
@@ -529,9 +529,9 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;
- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);
return tab;
}
@@ -543,9 +543,9 @@ void unwind_table_del(struct unwind_table *tab)
if (!tab)
return;
- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_del(&tab->list);
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);
kfree(tab);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 37/91] iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tables
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (35 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 36/91] ARM: 8840/1: use a raw_spinlock_t in unwind Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 38/91] mmc: omap: fix the maximum timeout setting Greg Kroah-Hartman
` (58 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicolas Boichat, Will Deacon,
Joerg Roedel, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 032ebd8548c9d05e8d2bdc7a7ec2fe29454b0ad0 ]
L1 tables are allocated with __get_dma_pages, and therefore already
ignored by kmemleak.
Without this, the kernel would print this error message on boot,
when the first L1 table is allocated:
[ 2.810533] kmemleak: Trying to color unknown object at 0xffffffd652388000 as Black
[ 2.818190] CPU: 5 PID: 39 Comm: kworker/5:0 Tainted: G S 4.19.16 #8
[ 2.831227] Workqueue: events deferred_probe_work_func
[ 2.836353] Call trace:
...
[ 2.852532] paint_ptr+0xa0/0xa8
[ 2.855750] kmemleak_ignore+0x38/0x6c
[ 2.859490] __arm_v7s_alloc_table+0x168/0x1f4
[ 2.863922] arm_v7s_alloc_pgtable+0x114/0x17c
[ 2.868354] alloc_io_pgtable_ops+0x3c/0x78
...
Fixes: e5fc9753b1a8314 ("iommu/io-pgtable: Add ARMv7 short descriptor support")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/io-pgtable-arm-v7s.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
index d68a552cfe8d..3085b47fac1d 100644
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -207,7 +207,8 @@ static void *__arm_v7s_alloc_table(int lvl, gfp_t gfp,
if (dma != virt_to_phys(table))
goto out_unmap;
}
- kmemleak_ignore(table);
+ if (lvl == 2)
+ kmemleak_ignore(table);
return table;
out_unmap:
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 38/91] mmc: omap: fix the maximum timeout setting
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (36 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 37/91] iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tables Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 39/91] e1000e: Fix -Wformat-truncation warnings Greg Kroah-Hartman
` (57 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aaro Koskinen, Ulf Hansson, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a6327b5e57fdc679c842588c3be046c0b39cc127 ]
When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy:
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
[ad inf.]
Emulator warnings appear to be valid. The TI document SPRU680 [1]
("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card
(MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253
cycles and "0xff and 0xfe cannot be used".
Fix by using 0xfd as the maximum timeout.
Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on
real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810
(OMAP2420) that MMC works as before.
[1] http://www.ti.com/lit/ug/spru680/spru680.pdf
Fixes: 730c9b7e6630f ("[MMC] Add OMAP MMC host driver")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/omap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a4bf14e21b5e..21dfce21aa63 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -920,7 +920,7 @@ static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_reques
reg &= ~(1 << 5);
OMAP_MMC_WRITE(host, SDIO, reg);
/* Set maximum timeout */
- OMAP_MMC_WRITE(host, CTO, 0xff);
+ OMAP_MMC_WRITE(host, CTO, 0xfd);
}
static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 39/91] e1000e: Fix -Wformat-truncation warnings
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (37 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 38/91] mmc: omap: fix the maximum timeout setting Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 40/91] mlxsw: spectrum: Avoid " Greg Kroah-Hartman
` (56 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Fainelli, David S. Miller,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 135e7245479addc6b1f5d031e3d7e2ddb3d2b109 ]
Provide precision hints to snprintf() since we know the destination
buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the
following warnings:
drivers/net/ethernet/intel/e1000e/netdev.c: In function
'e1000_request_msix':
drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
"%s-rx-0", netdev->name);
^
drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
snprintf(adapter->rx_ring->name,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(adapter->rx_ring->name) - 1,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-rx-0", netdev->name);
~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
"%s-tx-0", netdev->name);
^
drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
snprintf(adapter->tx_ring->name,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(adapter->tx_ring->name) - 1,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-tx-0", netdev->name);
~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 6855b3380a83..f56f8b6e2378 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2121,7 +2121,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
if (strlen(netdev->name) < (IFNAMSIZ - 5))
snprintf(adapter->rx_ring->name,
sizeof(adapter->rx_ring->name) - 1,
- "%s-rx-0", netdev->name);
+ "%.14s-rx-0", netdev->name);
else
memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
err = request_irq(adapter->msix_entries[vector].vector,
@@ -2137,7 +2137,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
if (strlen(netdev->name) < (IFNAMSIZ - 5))
snprintf(adapter->tx_ring->name,
sizeof(adapter->tx_ring->name) - 1,
- "%s-tx-0", netdev->name);
+ "%.14s-tx-0", netdev->name);
else
memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
err = request_irq(adapter->msix_entries[vector].vector,
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 40/91] mlxsw: spectrum: Avoid -Wformat-truncation warnings
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (38 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 39/91] e1000e: Fix -Wformat-truncation warnings Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 41/91] IB/mlx4: Increase the timeout for CM cache Greg Kroah-Hartman
` (55 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Fainelli, Ido Schimmel,
David S. Miller, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ab2c4e2581ad32c28627235ff0ae8c5a5ea6899f ]
Give precision identifiers to the two snprintf() formatting the priority
and TC strings to avoid producing these two warnings:
drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function
'mlxsw_sp_port_get_prio_strings':
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d'
directive output may be truncated writing between 1 and 3 bytes into a
region of size between 0 and 31 [-Wformat-truncation=]
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf'
output between 3 and 36 bytes into a destination of size 32
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mlxsw_sp_port_hw_prio_stats[i].str, prio);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function
'mlxsw_sp_port_get_tc_strings':
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d'
directive output may be truncated writing between 1 and 11 bytes into a
region of size between 0 and 31 [-Wformat-truncation=]
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf'
output between 3 and 44 bytes into a destination of size 32
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mlxsw_sp_port_hw_tc_stats[i].str, tc);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 22a5916e477e..cc847e0cac2d 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -1565,7 +1565,7 @@ static void mlxsw_sp_port_get_prio_strings(u8 **p, int prio)
int i;
for (i = 0; i < MLXSW_SP_PORT_HW_PRIO_STATS_LEN; i++) {
- snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
+ snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
mlxsw_sp_port_hw_prio_stats[i].str, prio);
*p += ETH_GSTRING_LEN;
}
@@ -1576,7 +1576,7 @@ static void mlxsw_sp_port_get_tc_strings(u8 **p, int tc)
int i;
for (i = 0; i < MLXSW_SP_PORT_HW_TC_STATS_LEN; i++) {
- snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
+ snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
mlxsw_sp_port_hw_tc_stats[i].str, tc);
*p += ETH_GSTRING_LEN;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 41/91] IB/mlx4: Increase the timeout for CM cache
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (39 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 40/91] mlxsw: spectrum: Avoid " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 42/91] scsi: megaraid_sas: return error when create DMA pool failed Greg Kroah-Hartman
` (54 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Håkon Bugge, Jack Morgenstein,
Jason Gunthorpe, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2612d723aadcf8281f9bf8305657129bd9f3cd57 ]
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.
Following the RDMA Connection Manager (CM) protocol, it is clear when
an entry has to evicted form the cache. But life is not perfect,
remote peers may die or be rebooted. Hence, it's a timeout to wipe out
a cache entry, when the PF driver assumes the remote peer has gone.
During workloads where a high number of QPs are destroyed concurrently,
excessive amount of CM DREQ retries has been observed
The problem can be demonstrated in a bare-metal environment, where two
nodes have instantiated 8 VFs each. This using dual ported HCAs, so we
have 16 vPorts per physical server.
64 processes are associated with each vPort and creates and destroys
one QP for each of the remote 64 processes. That is, 1024 QPs per
vPort, all in all 16K QPs. The QPs are created/destroyed using the
CM.
When tearing down these 16K QPs, excessive CM DREQ retries (and
duplicates) are observed. With some cat/paste/awk wizardry on the
infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the
nodes:
cm_rx_duplicates:
dreq 2102
cm_rx_msgs:
drep 1989
dreq 6195
rep 3968
req 4224
rtu 4224
cm_tx_msgs:
drep 4093
dreq 27568
rep 4224
req 3968
rtu 3968
cm_tx_retries:
dreq 23469
Note that the active/passive side is equally distributed between the
two nodes.
Enabling pr_debug in cm.c gives tons of:
[171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
1,sl_cm_id: 0xd393089f} is NULL!
By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
tear-down phase of the application is reduced from approximately 90 to
50 seconds. Retries/duplicates are also significantly reduced:
cm_rx_duplicates:
dreq 2460
[]
cm_tx_retries:
dreq 3010
req 47
Increasing the timeout further didn't help, as these duplicates and
retries stems from a too short CMA timeout, which was 20 (~4 seconds)
on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
numbers fell down to about 10 for both of them.
Adjustment of the CMA timeout is not part of this commit.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/mlx4/cm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index 39a488889fc7..5dc920fe1326 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -39,7 +39,7 @@
#include "mlx4_ib.h"
-#define CM_CLEANUP_CACHE_TIMEOUT (5 * HZ)
+#define CM_CLEANUP_CACHE_TIMEOUT (30 * HZ)
struct id_map_entry {
struct rb_node node;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 42/91] scsi: megaraid_sas: return error when create DMA pool failed
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (40 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 41/91] IB/mlx4: Increase the timeout for CM cache Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 43/91] perf test: Fix failure of evsel-tp-sched test on s390 Greg Kroah-Hartman
` (53 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Yan, Sumit Saxena,
Martin K. Petersen, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bcf3b67d16a4c8ffae0aa79de5853435e683945c ]
when create DMA pool for cmd frames failed, we should return -ENOMEM,
instead of 0.
In some case in:
megasas_init_adapter_fusion()
-->megasas_alloc_cmds()
-->megasas_create_frame_pool
create DMA pool failed,
--> megasas_free_cmds() [1]
-->megasas_alloc_cmds_fusion()
failed, then goto fail_alloc_cmds.
-->megasas_free_cmds() [2]
we will call megasas_free_cmds twice, [1] will kfree cmd_list,
[2] will use cmd_list.it will cause a problem:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = ffffffc000f70000
[00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003,
*pmd=0000001fbf894003, *pte=006000006d000707
Internal error: Oops: 96000005 [#1] SMP
Modules linked in:
CPU: 18 PID: 1 Comm: swapper/0 Not tainted
task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000
PC is at megasas_free_cmds+0x30/0x70
LR is at megasas_free_cmds+0x24/0x70
...
Call trace:
[<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70
[<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8
[<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760
[<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8
[<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4
[<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c
[<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430
[<ffffffc00053a92c>] __driver_attach+0xa8/0xb0
[<ffffffc000538178>] bus_for_each_dev+0x74/0xc8
[<ffffffc000539e88>] driver_attach+0x28/0x34
[<ffffffc000539a18>] bus_add_driver+0x16c/0x248
[<ffffffc00053b234>] driver_register+0x6c/0x138
[<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c
[<ffffffc000ce3868>] megasas_init+0xc0/0x1a8
[<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec
[<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284
[<ffffffc0008d90b8>] kernel_init+0x1c/0xe4
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 5de024a50e15..5b1c37e3913c 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3956,6 +3956,7 @@ int megasas_alloc_cmds(struct megasas_instance *instance)
if (megasas_create_frame_pool(instance)) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Error creating frame DMA pool\n");
megasas_free_cmds(instance);
+ return -ENOMEM;
}
return 0;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 43/91] perf test: Fix failure of evsel-tp-sched test on s390
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (41 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 42/91] scsi: megaraid_sas: return error when create DMA pool failed Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 44/91] SoC: imx-sgtl5000: add missing put_device() Greg Kroah-Hartman
` (52 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Richter, Heiko Carstens,
Hendrik Brueckner, Martin Schwidefsky, Arnaldo Carvalho de Melo,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 03d309711d687460d1345de8a0363f45b1c8cd11 ]
Commit 489338a717a0 ("perf tests evsel-tp-sched: Fix bitwise operator")
causes test case 14 "Parse sched tracepoints fields" to fail on s390.
This test succeeds on x86.
In fact this test now fails on all architectures with type char treated
as type unsigned char.
The root cause is the signed-ness of character arrays in the tracepoints
sched_switch for structure members prev_comm and next_comm.
On s390 the output of:
[root@m35lp76 perf]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:0;
...
field:char next_comm[16]; offset:40; size:16; signed:0;
reveals the character arrays prev_comm and next_comm are per
default unsigned char and have values in the range of 0..255.
On x86 both fields are signed as this output shows:
[root@f29]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:1;
...
field:char next_comm[16]; offset:40; size:16; signed:1;
and the character arrays prev_comm and next_comm are per default signed
char and have values in the range of -1..127. The implementation of
type char is architecture specific.
Since the character arrays in both tracepoints sched_switch and
sched_wakeup should contain ascii characters, simply omit the check for
signedness in the test case.
Output before:
[root@m35lp76 perf]# ./perf test -F 14
14: Parse sched tracepoints fields :
--- start ---
sched:sched_switch: "prev_comm" signedness(0) is wrong, should be 1
sched:sched_switch: "next_comm" signedness(0) is wrong, should be 1
sched:sched_wakeup: "comm" signedness(0) is wrong, should be 1
---- end ----
14: Parse sched tracepoints fields : FAILED!
[root@m35lp76 perf]#
Output after:
[root@m35lp76 perf]# ./perf test -Fv 14
14: Parse sched tracepoints fields :
--- start ---
---- end ----
Parse sched tracepoints fields: Ok
[root@m35lp76 perf]#
Fixes: 489338a717a0 ("perf tests evsel-tp-sched: Fix bitwise operator")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190219153639.31267-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/tests/evsel-tp-sched.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/perf/tests/evsel-tp-sched.c b/tools/perf/tests/evsel-tp-sched.c
index 66b53f10eb18..ea772d41e472 100644
--- a/tools/perf/tests/evsel-tp-sched.c
+++ b/tools/perf/tests/evsel-tp-sched.c
@@ -42,7 +42,7 @@ int test__perf_evsel__tp_sched_test(int subtest __maybe_unused)
return -1;
}
- if (perf_evsel__test_field(evsel, "prev_comm", 16, true))
+ if (perf_evsel__test_field(evsel, "prev_comm", 16, false))
ret = -1;
if (perf_evsel__test_field(evsel, "prev_pid", 4, true))
@@ -54,7 +54,7 @@ int test__perf_evsel__tp_sched_test(int subtest __maybe_unused)
if (perf_evsel__test_field(evsel, "prev_state", sizeof(long), true))
ret = -1;
- if (perf_evsel__test_field(evsel, "next_comm", 16, true))
+ if (perf_evsel__test_field(evsel, "next_comm", 16, false))
ret = -1;
if (perf_evsel__test_field(evsel, "next_pid", 4, true))
@@ -72,7 +72,7 @@ int test__perf_evsel__tp_sched_test(int subtest __maybe_unused)
return -1;
}
- if (perf_evsel__test_field(evsel, "comm", 16, true))
+ if (perf_evsel__test_field(evsel, "comm", 16, false))
ret = -1;
if (perf_evsel__test_field(evsel, "pid", 4, true))
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 44/91] SoC: imx-sgtl5000: add missing put_device()
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (42 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 43/91] perf test: Fix failure of evsel-tp-sched test on s390 Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 45/91] media: sh_veu: Correct return type for mem2mem buffer helpers Greg Kroah-Hartman
` (51 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wen Yang, Timur Tabi, Nicolin Chen,
Xiubo Li, Fabio Estevam, Liam Girdwood, Mark Brown,
Jaroslav Kysela, Takashi Iwai, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, NXP Linux Team, alsa-devel,
linuxppc-dev, linux-arm-kernel, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8fa857da9744f513036df1c43ab57f338941ae7d ]
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Detected by coccinelle with the following warnings:
./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/imx-sgtl5000.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index b99e0b5e00e9..8e525f7ac08d 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -115,6 +115,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
ret = -EPROBE_DEFER;
goto fail;
}
+ put_device(&ssi_pdev->dev);
codec_dev = of_find_i2c_device_by_node(codec_np);
if (!codec_dev) {
dev_err(&pdev->dev, "failed to find codec platform device\n");
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 45/91] media: sh_veu: Correct return type for mem2mem buffer helpers
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (43 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 44/91] SoC: imx-sgtl5000: add missing put_device() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 46/91] media: s5p-jpeg: " Greg Kroah-Hartman
` (50 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 43c145195c7fc3025ee7ecfc67112ac1c82af7c2 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/sh_veu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c
index 15a562af13c7..a4f593220ef0 100644
--- a/drivers/media/platform/sh_veu.c
+++ b/drivers/media/platform/sh_veu.c
@@ -276,13 +276,13 @@ static void sh_veu_process(struct sh_veu_dev *veu,
static void sh_veu_device_run(void *priv)
{
struct sh_veu_dev *veu = priv;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
src_buf = v4l2_m2m_next_src_buf(veu->m2m_ctx);
dst_buf = v4l2_m2m_next_dst_buf(veu->m2m_ctx);
if (src_buf && dst_buf)
- sh_veu_process(veu, src_buf, dst_buf);
+ sh_veu_process(veu, &src_buf->vb2_buf, &dst_buf->vb2_buf);
}
/* ========== video ioctls ========== */
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 46/91] media: s5p-jpeg: Correct return type for mem2mem buffer helpers
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (44 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 45/91] media: sh_veu: Correct return type for mem2mem buffer helpers Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 47/91] media: s5p-g2d: " Greg Kroah-Hartman
` (49 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4a88f89885c7cf65c62793f385261a6e3315178a ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/s5p-jpeg/jpeg-core.c | 38 ++++++++++-----------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 1da2c94e1dca..06e2b72d07ca 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -789,14 +789,14 @@ static void skip(struct s5p_jpeg_buffer *buf, long len);
static void exynos4_jpeg_parse_decode_h_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, x, components;
jpeg_buffer.size = 2; /* Ls */
jpeg_buffer.data =
- (unsigned long)vb2_plane_vaddr(vb, 0) + ctx->out_q.sos + 2;
+ (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.sos + 2;
jpeg_buffer.curr = 0;
word = 0;
@@ -826,14 +826,14 @@ static void exynos4_jpeg_parse_decode_h_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_huff_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, i, n, j;
for (j = 0; j < ctx->out_q.dht.n; ++j) {
jpeg_buffer.size = ctx->out_q.dht.len[j];
- jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(vb, 0) +
+ jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) +
ctx->out_q.dht.marker[j];
jpeg_buffer.curr = 0;
@@ -885,13 +885,13 @@ static void exynos4_jpeg_parse_huff_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_decode_q_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
int c, x, components;
jpeg_buffer.size = ctx->out_q.sof_len;
jpeg_buffer.data =
- (unsigned long)vb2_plane_vaddr(vb, 0) + ctx->out_q.sof;
+ (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.sof;
jpeg_buffer.curr = 0;
skip(&jpeg_buffer, 5); /* P, Y, X */
@@ -916,14 +916,14 @@ static void exynos4_jpeg_parse_decode_q_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_q_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, i, j;
for (j = 0; j < ctx->out_q.dqt.n; ++j) {
jpeg_buffer.size = ctx->out_q.dqt.len[j];
- jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(vb, 0) +
+ jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) +
ctx->out_q.dqt.marker[j];
jpeg_buffer.curr = 0;
@@ -2027,15 +2027,15 @@ static void s5p_jpeg_device_run(void *priv)
{
struct s5p_jpeg_ctx *ctx = priv;
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
unsigned long src_addr, dst_addr, flags;
spin_lock_irqsave(&ctx->jpeg->slock, flags);
src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
- src_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
- dst_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+ src_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+ dst_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
s5p_jpeg_reset(jpeg->regs);
s5p_jpeg_poweron(jpeg->regs);
@@ -2108,7 +2108,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
struct s5p_jpeg_fmt *fmt;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
struct s5p_jpeg_addr jpeg_addr = {};
u32 pix_size, padding_bytes = 0;
@@ -2127,7 +2127,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
vb = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
}
- jpeg_addr.y = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr.y = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
if (fmt->colplanes == 2) {
jpeg_addr.cb = jpeg_addr.y + pix_size - padding_bytes;
@@ -2145,7 +2145,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
unsigned int jpeg_addr = 0;
if (ctx->mode == S5P_JPEG_ENCODE)
@@ -2153,7 +2153,7 @@ static void exynos4_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
else
vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
- jpeg_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
if (jpeg->variant->version == SJPEG_EXYNOS5433 &&
ctx->mode == S5P_JPEG_DECODE)
jpeg_addr += ctx->out_q.sos;
@@ -2268,7 +2268,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
struct s5p_jpeg_fmt *fmt;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
struct s5p_jpeg_addr jpeg_addr = {};
u32 pix_size;
@@ -2282,7 +2282,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
fmt = ctx->cap_q.fmt;
}
- jpeg_addr.y = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr.y = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
if (fmt->colplanes == 2) {
jpeg_addr.cb = jpeg_addr.y + pix_size;
@@ -2300,7 +2300,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
static void exynos3250_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
unsigned int jpeg_addr = 0;
if (ctx->mode == S5P_JPEG_ENCODE)
@@ -2308,7 +2308,7 @@ static void exynos3250_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
else
vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
- jpeg_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
exynos3250_jpeg_jpgadr(jpeg->regs, jpeg_addr);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 47/91] media: s5p-g2d: Correct return type for mem2mem buffer helpers
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (45 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 46/91] media: s5p-jpeg: " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 48/91] media: mx2_emmaprp: " Greg Kroah-Hartman
` (48 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 30fa627b32230737bc3f678067e2adfecf956987 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/s5p-g2d/g2d.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c
index 62c0dec30b59..5f6ccf492111 100644
--- a/drivers/media/platform/s5p-g2d/g2d.c
+++ b/drivers/media/platform/s5p-g2d/g2d.c
@@ -498,7 +498,7 @@ static void device_run(void *prv)
{
struct g2d_ctx *ctx = prv;
struct g2d_dev *dev = ctx->dev;
- struct vb2_buffer *src, *dst;
+ struct vb2_v4l2_buffer *src, *dst;
unsigned long flags;
u32 cmd = 0;
@@ -513,10 +513,10 @@ static void device_run(void *prv)
spin_lock_irqsave(&dev->ctrl_lock, flags);
g2d_set_src_size(dev, &ctx->in);
- g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(src, 0));
+ g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(&src->vb2_buf, 0));
g2d_set_dst_size(dev, &ctx->out);
- g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(dst, 0));
+ g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(&dst->vb2_buf, 0));
g2d_set_rop4(dev, ctx->rop);
g2d_set_flip(dev, ctx->flip);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 48/91] media: mx2_emmaprp: Correct return type for mem2mem buffer helpers
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (46 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 47/91] media: s5p-g2d: " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 49/91] vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1 Greg Kroah-Hartman
` (47 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8d20dcefe471763f23ad538369ec65b51993ffff ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/mx2_emmaprp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c
index e68d271b10af..8354ad20865a 100644
--- a/drivers/media/platform/mx2_emmaprp.c
+++ b/drivers/media/platform/mx2_emmaprp.c
@@ -288,7 +288,7 @@ static void emmaprp_device_run(void *priv)
{
struct emmaprp_ctx *ctx = priv;
struct emmaprp_q_data *s_q_data, *d_q_data;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
struct emmaprp_dev *pcdev = ctx->dev;
unsigned int s_width, s_height;
unsigned int d_width, d_height;
@@ -308,8 +308,8 @@ static void emmaprp_device_run(void *priv)
d_height = d_q_data->height;
d_size = d_width * d_height;
- p_in = vb2_dma_contig_plane_dma_addr(src_buf, 0);
- p_out = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+ p_in = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+ p_out = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
if (!p_in || !p_out) {
v4l2_err(&pcdev->v4l2_dev,
"Acquiring kernel pointers to buffers failed\n");
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 49/91] vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (47 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 48/91] media: mx2_emmaprp: " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 50/91] HID: intel-ish-hid: avoid binding wrong ishtp_cl_device Greg Kroah-Hartman
` (46 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Viro, H.J. Lu,
Aurelien Jarno, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cc4b1242d7e3b42eed73881fc749944146493e4f ]
The preadv2 and pwritev2 syscalls are supposed to emulate the readv and
writev syscalls when offset == -1. Therefore the compat code should
check for offset before calling do_compat_preadv64 and
do_compat_pwritev64. This is the case for the preadv2 and pwritev2
syscalls, but handling of offset == -1 is missing in their 64-bit
equivalent.
This patch fixes that, calling do_compat_readv and do_compat_writev when
offset == -1. This fixes the following glibc tests on x32:
- misc/tst-preadvwritev2
- misc/tst-preadvwritev64v2
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/read_write.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/fs/read_write.c b/fs/read_write.c
index 9819f7c6c8c5..6ab67b860159 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1204,6 +1204,9 @@ COMPAT_SYSCALL_DEFINE5(preadv64v2, unsigned long, fd,
const struct compat_iovec __user *,vec,
unsigned long, vlen, loff_t, pos, int, flags)
{
+ if (pos == -1)
+ return do_compat_readv(fd, vec, vlen, flags);
+
return do_compat_preadv64(fd, vec, vlen, pos, flags);
}
#endif
@@ -1310,6 +1313,9 @@ COMPAT_SYSCALL_DEFINE5(pwritev64v2, unsigned long, fd,
const struct compat_iovec __user *,vec,
unsigned long, vlen, loff_t, pos, int, flags)
{
+ if (pos == -1)
+ return do_compat_writev(fd, vec, vlen, flags);
+
return do_compat_pwritev64(fd, vec, vlen, pos, flags);
}
#endif
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 50/91] HID: intel-ish-hid: avoid binding wrong ishtp_cl_device
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (48 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 49/91] vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1 Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 51/91] leds: lp55xx: fix null deref on firmware load failure Greg Kroah-Hartman
` (45 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hong Liu, Hongyan Song,
Srinivas Pandruvada, Jiri Kosina, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0d28f49412405d87d3aae83da255070a46e67627 ]
When performing a warm reset in ishtp bus driver, the ishtp_cl_device
will not be removed, its fw_client still points to the already freed
ishtp_device.fw_clients array.
Later after driver finishing ishtp client enumeration, this dangling
pointer may cause driver to bind the wrong ishtp_cl_device to the new
client, causing wrong callback to be called for messages intended for
the new client.
This helps in development of firmware where frequent switching of
firmwares is required without Linux reboot.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Tested-by: Hongyan Song <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/intel-ish-hid/ishtp/bus.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/intel-ish-hid/ishtp/bus.c b/drivers/hid/intel-ish-hid/ishtp/bus.c
index 256521509d20..0de18c76f8d4 100644
--- a/drivers/hid/intel-ish-hid/ishtp/bus.c
+++ b/drivers/hid/intel-ish-hid/ishtp/bus.c
@@ -628,7 +628,8 @@ int ishtp_cl_device_bind(struct ishtp_cl *cl)
spin_lock_irqsave(&cl->dev->device_list_lock, flags);
list_for_each_entry(cl_device, &cl->dev->device_list,
device_link) {
- if (cl_device->fw_client->client_id == cl->fw_client_id) {
+ if (cl_device->fw_client &&
+ cl_device->fw_client->client_id == cl->fw_client_id) {
cl->device = cl_device;
rv = 0;
break;
@@ -688,6 +689,7 @@ void ishtp_bus_remove_all_clients(struct ishtp_device *ishtp_dev,
spin_lock_irqsave(&ishtp_dev->device_list_lock, flags);
list_for_each_entry_safe(cl_device, n, &ishtp_dev->device_list,
device_link) {
+ cl_device->fw_client = NULL;
if (warm_reset && cl_device->reference_count)
continue;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 51/91] leds: lp55xx: fix null deref on firmware load failure
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (49 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 50/91] HID: intel-ish-hid: avoid binding wrong ishtp_cl_device Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 52/91] iwlwifi: pcie: fix emergency path Greg Kroah-Hartman
` (44 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michal Kazior, Jacek Anaszewski, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5ddb0869bfc1bca6cfc592c74c64a026f936638c ]
I've stumbled upon a kernel crash and the logs
pointed me towards the lp5562 driver:
> <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2
> <4>[306013.894990] lp5562 0-0030: Falling back to user helper
> ...
> <3>[306073.924886] lp5562 0-0030: firmware request failed
> <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58
> <4>[306074.255539] LR is at release_firmware+0x6c/0x138
> ...
After taking a look I noticed firmware_release()
could be called with either NULL or a dangling
pointer.
Fixes: 10c06d178df11 ("leds-lp55xx: support firmware interface")
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/leds/leds-lp55xx-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 5377f22ff994..e2655953667c 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -201,7 +201,7 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
if (!fw) {
dev_err(dev, "firmware request failed\n");
- goto out;
+ return;
}
/* handling firmware data is chip dependent */
@@ -214,9 +214,9 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
mutex_unlock(&chip->lock);
-out:
/* firmware should be released for other channel use */
release_firmware(chip->fw);
+ chip->fw = NULL;
}
static int lp55xx_request_firmware(struct lp55xx_chip *chip)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 52/91] iwlwifi: pcie: fix emergency path
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (50 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 51/91] leds: lp55xx: fix null deref on firmware load failure Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 53/91] ACPI / video: Refactor and fix dmi_is_desktop() Greg Kroah-Hartman
` (43 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ilan Peer, Sara Sharon, Luca Coelho,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c6ac9f9fb98851f47b978a9476594fc3c477a34d ]
Allocator swaps the pending requests with 0 when it starts
working. This means that relying on it n RX path to decide if
to move to emergency is not always a good idea, since it may
be zero, but there are still a lot of unallocated RBs in the
system. Change allocator to decrement the pending requests on
real time. It is more expensive since it accesses the atomic
variable more times, but it gives the RX path a better idea
of the system's status.
Reported-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 868a1e863f95 ("iwlwifi: pcie: avoid empty free RB queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index e58a50d31d96..c21f8bd32d08 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -475,7 +475,7 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_rb_allocator *rba = &trans_pcie->rba;
struct list_head local_empty;
- int pending = atomic_xchg(&rba->req_pending, 0);
+ int pending = atomic_read(&rba->req_pending);
IWL_DEBUG_RX(trans, "Pending allocation requests = %d\n", pending);
@@ -530,11 +530,13 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
i++;
}
+ atomic_dec(&rba->req_pending);
pending--;
+
if (!pending) {
- pending = atomic_xchg(&rba->req_pending, 0);
+ pending = atomic_read(&rba->req_pending);
IWL_DEBUG_RX(trans,
- "Pending allocation requests = %d\n",
+ "Got more pending allocation requests = %d\n",
pending);
}
@@ -546,12 +548,15 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
spin_unlock(&rba->lock);
atomic_inc(&rba->req_ready);
+
}
spin_lock(&rba->lock);
/* return unused rbds to the allocator empty list */
list_splice_tail(&local_empty, &rba->rbd_empty);
spin_unlock(&rba->lock);
+
+ IWL_DEBUG_RX(trans, "%s, exit.\n", __func__);
}
/*
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 53/91] ACPI / video: Refactor and fix dmi_is_desktop()
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (51 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 52/91] iwlwifi: pcie: fix emergency path Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 54/91] kprobes: Prohibit probing on bsearch() Greg Kroah-Hartman
` (42 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Rafael J. Wysocki,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cecf3e3e0803462335e25d083345682518097334 ]
This commit refactors the chassis-type detection introduced by
commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") (where desktop means anything without a builtin
screen).
The DMI chassis_type is an unsigned integer, so rather then doing a
whole bunch of string-compares on it, convert it to an int and feed
the result to a switch case.
Note the switch case uses hex values, this is done because the spec
uses hex values too. This changes the check for "Main Server Chassis"
from checking for 11 decimal to 11 hexadecimal, this is a bug fix,
the original check for 11 decimal was wrong.
Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Drop redundant return statements ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpi_video.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index 667dc5c86fef..d79e38abd6d9 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2069,21 +2069,28 @@ static int __init intel_opregion_present(void)
return opregion;
}
+/* Check if the chassis-type indicates there is no builtin LCD panel */
static bool dmi_is_desktop(void)
{
const char *chassis_type;
+ unsigned long type;
chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
if (!chassis_type)
return false;
- if (!strcmp(chassis_type, "3") || /* 3: Desktop */
- !strcmp(chassis_type, "4") || /* 4: Low Profile Desktop */
- !strcmp(chassis_type, "5") || /* 5: Pizza Box */
- !strcmp(chassis_type, "6") || /* 6: Mini Tower */
- !strcmp(chassis_type, "7") || /* 7: Tower */
- !strcmp(chassis_type, "11")) /* 11: Main Server Chassis */
+ if (kstrtoul(chassis_type, 10, &type) != 0)
+ return false;
+
+ switch (type) {
+ case 0x03: /* Desktop */
+ case 0x04: /* Low Profile Desktop */
+ case 0x05: /* Pizza Box */
+ case 0x06: /* Mini Tower */
+ case 0x07: /* Tower */
+ case 0x11: /* Main Server Chassis */
return true;
+ }
return false;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 54/91] kprobes: Prohibit probing on bsearch()
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (52 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 53/91] ACPI / video: Refactor and fix dmi_is_desktop() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 55/91] ARM: 8833/1: Ensure that NEON code always compiles with Clang Greg Kroah-Hartman
` (41 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrea Righi, Masami Hiramatsu,
Alexander Shishkin, Arnaldo Carvalho de Melo, Jiri Olsa,
Linus Torvalds, Mathieu Desnoyers, Peter Zijlstra,
Steven Rostedt, Thomas Gleixner, Ingo Molnar, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 02106f883cd745523f7766d90a739f983f19e650 ]
Since kprobe breakpoing handler is using bsearch(), probing on this
routine can cause recursive breakpoint problem.
int3
->do_int3()
->ftrace_int3_handler()
->ftrace_location()
->ftrace_location_range()
->bsearch() -> int3
Prohibit probing on bsearch().
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998813406.31052.8791425358974650922.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/bsearch.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/lib/bsearch.c b/lib/bsearch.c
index e33c179089db..d50048446b77 100644
--- a/lib/bsearch.c
+++ b/lib/bsearch.c
@@ -11,6 +11,7 @@
#include <linux/export.h>
#include <linux/bsearch.h>
+#include <linux/kprobes.h>
/*
* bsearch - binary search an array of elements
@@ -51,3 +52,4 @@ void *bsearch(const void *key, const void *base, size_t num, size_t size,
return NULL;
}
EXPORT_SYMBOL(bsearch);
+NOKPROBE_SYMBOL(bsearch);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 55/91] ARM: 8833/1: Ensure that NEON code always compiles with Clang
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (53 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 54/91] kprobes: Prohibit probing on bsearch() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 56/91] ALSA: PCM: check if ops are defined before suspending PCM Greg Kroah-Hartman
` (40 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ard Biesheuvel, Nathan Chancellor,
Nicolas Pitre, Nick Desaulniers, Stefan Agner, Russell King,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit de9c0d49d85dc563549972edc5589d195cd5e859 ]
While building arm32 allyesconfig, I ran into the following errors:
arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with
'-mfloat-abi=softfp -mfpu=neon'
In file included from lib/raid6/neon1.c:27:
/home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2:
error: "NEON support not enabled"
Building V=1 showed NEON_FLAGS getting passed along to Clang but
__ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang
only defining __ARM_NEON__ when targeting armv7, rather than armv6k,
which is the '-march' value for allyesconfig.
>From lib/Basic/Targets/ARM.cpp in the Clang source:
// This only gets set when Neon instructions are actually available, unlike
// the VFP define, hence the soft float and arch check. This is subtly
// different from gcc, we follow the intent which was that it should be set
// when Neon instructions are actually available.
if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) {
Builder.defineMacro("__ARM_NEON", "1");
Builder.defineMacro("__ARM_NEON__");
// current AArch32 NEON implementations do not support double-precision
// floating-point even when it is present in VFP.
Builder.defineMacro("__ARM_NEON_FP",
"0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP));
}
Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the
beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets
definined by Clang. This doesn't functionally change anything because
that code will only run where NEON is supported, which is implicitly
armv7.
Link: https://github.com/ClangBuiltLinux/linux/issues/287
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/arm/kernel_mode_neon.txt | 4 ++--
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/xor-neon.c | 2 +-
lib/raid6/Makefile | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/arm/kernel_mode_neon.txt b/Documentation/arm/kernel_mode_neon.txt
index 525452726d31..b9e060c5b61e 100644
--- a/Documentation/arm/kernel_mode_neon.txt
+++ b/Documentation/arm/kernel_mode_neon.txt
@@ -6,7 +6,7 @@ TL;DR summary
* Use only NEON instructions, or VFP instructions that don't rely on support
code
* Isolate your NEON code in a separate compilation unit, and compile it with
- '-mfpu=neon -mfloat-abi=softfp'
+ '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
NEON code
* Don't sleep in your NEON code, and be aware that it will be executed with
@@ -87,7 +87,7 @@ instructions appearing in unexpected places if no special care is taken.
Therefore, the recommended and only supported way of using NEON/VFP in the
kernel is by adhering to the following rules:
* isolate the NEON code in a separate compilation unit and compile it with
- '-mfpu=neon -mfloat-abi=softfp';
+ '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
into the unit containing the NEON code from a compilation unit which is *not*
built with the GCC flag '-mfpu=neon' set.
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 27f4d96258a2..b3ecffb76c3f 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -38,7 +38,7 @@ $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
- NEON_FLAGS := -mfloat-abi=softfp -mfpu=neon
+ NEON_FLAGS := -march=armv7-a -mfloat-abi=softfp -mfpu=neon
CFLAGS_xor-neon.o += $(NEON_FLAGS)
obj-$(CONFIG_XOR_BLOCKS) += xor-neon.o
endif
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index 2c40aeab3eaa..c691b901092f 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -14,7 +14,7 @@
MODULE_LICENSE("GPL");
#ifndef __ARM_NEON__
-#error You should compile this file with '-mfloat-abi=softfp -mfpu=neon'
+#error You should compile this file with '-march=armv7-a -mfloat-abi=softfp -mfpu=neon'
#endif
/*
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
index 3057011f5599..10ca69475611 100644
--- a/lib/raid6/Makefile
+++ b/lib/raid6/Makefile
@@ -24,7 +24,7 @@ endif
ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
NEON_FLAGS := -ffreestanding
ifeq ($(ARCH),arm)
-NEON_FLAGS += -mfloat-abi=softfp -mfpu=neon
+NEON_FLAGS += -march=armv7-a -mfloat-abi=softfp -mfpu=neon
endif
ifeq ($(ARCH),arm64)
CFLAGS_REMOVE_neon1.o += -mgeneral-regs-only
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 56/91] ALSA: PCM: check if ops are defined before suspending PCM
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (54 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 55/91] ARM: 8833/1: Ensure that NEON code always compiles with Clang Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 57/91] usb: f_fs: Avoid crash due to out-of-scope stack ptr access Greg Kroah-Hartman
` (39 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ranjani Sridharan,
Pierre-Louis Bossart, Takashi Iwai, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d9c0b2afe820fa3b3f8258a659daee2cc71ca3ef ]
BE dai links only have internal PCM's and their substream ops may
not be set. Suspending these PCM's will result in their
ops->trigger() being invoked and cause a kernel oops.
So skip suspending PCM's if their ops are NULL.
[ NOTE: this change is required now for following the recent PCM core
change to get rid of snd_pcm_suspend() call. Since DPCM BE takes
the runtime carried from FE while keeping NULL ops, it can hit this
bug. See details at:
https://github.com/thesofproject/linux/pull/582
-- tiwai ]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/core/pcm_native.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index e1138e70dbb3..f5eb10f8021c 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1346,6 +1346,14 @@ int snd_pcm_suspend_all(struct snd_pcm *pcm)
/* FIXME: the open/close code should lock this as well */
if (substream->runtime == NULL)
continue;
+
+ /*
+ * Skip BE dai link PCM's that are internal and may
+ * not have their substream ops set.
+ */
+ if (!substream->ops)
+ continue;
+
err = snd_pcm_suspend(substream);
if (err < 0 && err != -EBUSY)
return err;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 57/91] usb: f_fs: Avoid crash due to out-of-scope stack ptr access
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (55 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 56/91] ALSA: PCM: check if ops are defined before suspending PCM Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 58/91] bcache: fix input overflow to cache set sysfs file io_error_halflife Greg Kroah-Hartman
` (38 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alan Stern, Felipe Balbi, Zeng Tao,
Jack Pham, Thinh Nguyen, Chen Yu, Jerry Zhang,
Lars-Peter Clausen, Vincent Pelletier, Andrzej Pietrasiewicz,
Linux USB List, John Stultz, Felipe Balbi, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 54f64d5c983f939901dacc8cfc0983727c5c742e ]
Since the 5.0 merge window opened, I've been seeing frequent
crashes on suspend and reboot with the trace:
[ 36.911170] Unable to handle kernel paging request at virtual address ffffff801153d660
[ 36.912769] Unable to handle kernel paging request at virtual address ffffff800004b564
...
[ 36.950666] Call trace:
[ 36.950670] queued_spin_lock_slowpath+0x1cc/0x2c8
[ 36.950681] _raw_spin_lock_irqsave+0x64/0x78
[ 36.950692] complete+0x28/0x70
[ 36.950703] ffs_epfile_io_complete+0x3c/0x50
[ 36.950713] usb_gadget_giveback_request+0x34/0x108
[ 36.950721] dwc3_gadget_giveback+0x50/0x68
[ 36.950723] dwc3_thread_interrupt+0x358/0x1488
[ 36.950731] irq_thread_fn+0x30/0x88
[ 36.950734] irq_thread+0x114/0x1b0
[ 36.950739] kthread+0x104/0x130
[ 36.950747] ret_from_fork+0x10/0x1c
I isolated this down to in ffs_epfile_io():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/gadget/function/f_fs.c#n1065
Where the completion done is setup on the stack:
DECLARE_COMPLETION_ONSTACK(done);
Then later we setup a request and queue it, and wait for it:
if (unlikely(wait_for_completion_interruptible(&done))) {
/*
* To avoid race condition with ffs_epfile_io_complete,
* dequeue the request first then check
* status. usb_ep_dequeue API should guarantee no race
* condition with req->complete callback.
*/
usb_ep_dequeue(ep->ep, req);
interrupted = ep->status < 0;
}
The problem is, that we end up being interrupted, dequeue the
request, and exit.
But then the irq triggers and we try calling complete() on the
context pointer which points to now random stack space, which
results in the panic.
Alan Stern pointed out there is a bug here, in that the snippet
above "assumes that usb_ep_dequeue() waits until the request has
been completed." And that:
wait_for_completion(&done);
Is needed right after the usb_ep_dequeue().
Thus this patch implements that change. With it I no longer see
the crashes on suspend or reboot.
This issue seems to have been uncovered by behavioral changes in
the dwc3 driver in commit fec9095bdef4e ("usb: dwc3: gadget:
remove wait_end_transfer").
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Thinh Nguyen <thinh.nguyen@synopsys.com>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Vincent Pelletier <plr.vincent@gmail.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linux USB List <linux-usb@vger.kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/function/f_fs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 04eb64381d92..927ac0ee09b7 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1008,6 +1008,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
* condition with req->complete callback.
*/
usb_ep_dequeue(ep->ep, req);
+ wait_for_completion(&done);
interrupted = ep->status < 0;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 58/91] bcache: fix input overflow to cache set sysfs file io_error_halflife
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (56 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 57/91] usb: f_fs: Avoid crash due to out-of-scope stack ptr access Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 59/91] bcache: fix input overflow to sequential_cutoff Greg Kroah-Hartman
` (37 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Coly Li, Jens Axboe, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a91fbda49f746119828f7e8ad0f0aa2ab0578f65 ]
Cache set sysfs entry io_error_halflife is used to set c->error_decay.
c->error_decay is in type unsigned int, and it is converted by
strtoul_or_return(), therefore overflow to c->error_decay is possible
for a large input value.
This patch fixes the overflow by using strtoul_safe_clamp() to convert
input string to an unsigned long value in range [0, UINT_MAX], then
divides by 88 and set it to c->error_decay.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/sysfs.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 5a5c1f1bd8a5..87daccbbc61b 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -645,8 +645,17 @@ STORE(__bch_cache_set)
c->error_limit = strtoul_or_return(buf) << IO_ERROR_SHIFT;
/* See count_io_errors() for why 88 */
- if (attr == &sysfs_io_error_halflife)
- c->error_decay = strtoul_or_return(buf) / 88;
+ if (attr == &sysfs_io_error_halflife) {
+ unsigned long v = 0;
+ ssize_t ret;
+
+ ret = strtoul_safe_clamp(buf, v, 0, UINT_MAX);
+ if (!ret) {
+ c->error_decay = v / 88;
+ return size;
+ }
+ return ret;
+ }
sysfs_strtoul(journal_delay_ms, c->journal_delay_ms);
sysfs_strtoul(verify, c->verify);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 59/91] bcache: fix input overflow to sequential_cutoff
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (57 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 58/91] bcache: fix input overflow to cache set sysfs file io_error_halflife Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 60/91] bcache: improve sysfs_strtoul_clamp() Greg Kroah-Hartman
` (36 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Coly Li, Jens Axboe, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8c27a3953e92eb0b22dbb03d599f543a05f9574e ]
People may set sequential_cutoff of a cached device via sysfs file,
but current code does not check input value overflow. E.g. if value
4294967295 (UINT_MAX) is written to file sequential_cutoff, its value
is 4GB, but if 4294967296 (UINT_MAX + 1) is written into, its value
will be 0. This is an unexpected behavior.
This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert
input string to unsigned integer value, and limit its range in
[0, UINT_MAX]. Then the input overflow can be fixed.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/sysfs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 87daccbbc61b..463ce6757338 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -215,7 +215,9 @@ STORE(__cached_dev)
d_strtoul(writeback_rate_d_term);
d_strtoul_nonzero(writeback_rate_p_term_inverse);
- d_strtoi_h(sequential_cutoff);
+ sysfs_strtoul_clamp(sequential_cutoff,
+ dc->sequential_cutoff,
+ 0, UINT_MAX);
d_strtoi_h(readahead);
if (attr == &sysfs_clear_stats)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 60/91] bcache: improve sysfs_strtoul_clamp()
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (58 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 59/91] bcache: fix input overflow to sequential_cutoff Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 61/91] genirq: Avoid summation loops for /proc/stat Greg Kroah-Hartman
` (35 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Coly Li, Jens Axboe, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 596b5a5dd1bc2fa019fdaaae522ef331deef927f ]
Currently sysfs_strtoul_clamp() is defined as,
82 #define sysfs_strtoul_clamp(file, var, min, max) \
83 do { \
84 if (attr == &sysfs_ ## file) \
85 return strtoul_safe_clamp(buf, var, min, max) \
86 ?: (ssize_t) size; \
87 } while (0)
The problem is, if bit width of var is less then unsigned long, min and
max may not protect var from integer overflow, because overflow happens
in strtoul_safe_clamp() before checking min and max.
To fix such overflow in sysfs_strtoul_clamp(), to make min and max take
effect, this patch adds an unsigned long variable, and uses it to macro
strtoul_safe_clamp() to convert an unsigned long value in range defined
by [min, max]. Then assign this value to var. By this method, if bit
width of var is less than unsigned long, integer overflow won't happen
before min and max are checking.
Now sysfs_strtoul_clamp() can properly handle smaller data type like
unsigned int, of cause min and max should be defined in range of
unsigned int too.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/sysfs.h | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/md/bcache/sysfs.h b/drivers/md/bcache/sysfs.h
index 0526fe92a683..e7a3c12aa66f 100644
--- a/drivers/md/bcache/sysfs.h
+++ b/drivers/md/bcache/sysfs.h
@@ -80,9 +80,16 @@ do { \
#define sysfs_strtoul_clamp(file, var, min, max) \
do { \
- if (attr == &sysfs_ ## file) \
- return strtoul_safe_clamp(buf, var, min, max) \
- ?: (ssize_t) size; \
+ if (attr == &sysfs_ ## file) { \
+ unsigned long v = 0; \
+ ssize_t ret; \
+ ret = strtoul_safe_clamp(buf, v, min, max); \
+ if (!ret) { \
+ var = v; \
+ return size; \
+ } \
+ return ret; \
+ } \
} while (0)
#define strtoul_or_return(cp) \
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 61/91] genirq: Avoid summation loops for /proc/stat
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (59 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 60/91] bcache: improve sysfs_strtoul_clamp() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 62/91] iw_cxgb4: fix srqidx leak during connection abort Greg Kroah-Hartman
` (34 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Waiman Long, Thomas Gleixner,
Marc Zyngier, Davidlohr Bueso, Matthew Wilcox, Andrew Morton,
Alexey Dobriyan, Kees Cook, linux-fsdevel, Davidlohr Bueso,
Miklos Szeredi, Daniel Colascione, Dave Chinner, Randy Dunlap,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1136b0728969901a091f0471968b2b76ed14d9ad ]
Waiman reported that on large systems with a large amount of interrupts the
readout of /proc/stat takes a long time to sum up the interrupt
statistics. In principle this is not a problem. but for unknown reasons
some enterprise quality software reads /proc/stat with a high frequency.
The reason for this is that interrupt statistics are accounted per cpu. So
the /proc/stat logic has to sum up the interrupt stats for each interrupt.
This can be largely avoided for interrupts which are not marked as
'PER_CPU' interrupts by simply adding a per interrupt summation counter
which is incremented along with the per interrupt per cpu counter.
The PER_CPU interrupts need to avoid that and use only per cpu accounting
because they share the interrupt number and the interrupt descriptor and
concurrent updates would conflict or require unwanted synchronization.
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20190208135020.925487496@linutronix.de
8<-------------
v2: Undo the unintentional layout change of struct irq_desc.
include/linux/irqdesc.h | 1 +
kernel/irq/chip.c | 12 ++++++++++--
kernel/irq/internals.h | 8 +++++++-
kernel/irq/irqdesc.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/irqdesc.h | 1 +
kernel/irq/chip.c | 12 ++++++++++--
kernel/irq/internals.h | 8 +++++++-
kernel/irq/irqdesc.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index c9be57931b58..bb5547a83daf 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -61,6 +61,7 @@ struct irq_desc {
unsigned int core_internal_state__do_not_mess_with_it;
unsigned int depth; /* nested irq disables */
unsigned int wake_depth; /* nested wake enables */
+ unsigned int tot_count;
unsigned int irq_count; /* For detecting broken IRQs */
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index f30110e1b8c9..9e745cc0726d 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -729,7 +729,11 @@ void handle_percpu_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
- kstat_incr_irqs_this_cpu(desc);
+ /*
+ * PER CPU interrupts are not serialized. Do not touch
+ * desc->tot_count.
+ */
+ __kstat_incr_irqs_this_cpu(desc);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
@@ -758,7 +762,11 @@ void handle_percpu_devid_irq(struct irq_desc *desc)
unsigned int irq = irq_desc_get_irq(desc);
irqreturn_t res;
- kstat_incr_irqs_this_cpu(desc);
+ /*
+ * PER CPU interrupts are not serialized. Do not touch
+ * desc->tot_count.
+ */
+ __kstat_incr_irqs_this_cpu(desc);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index bc226e783bd2..22e3f29a30d8 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -199,12 +199,18 @@ static inline bool irqd_has_set(struct irq_data *d, unsigned int mask)
#undef __irqd_to_state
-static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
+static inline void __kstat_incr_irqs_this_cpu(struct irq_desc *desc)
{
__this_cpu_inc(*desc->kstat_irqs);
__this_cpu_inc(kstat.irqs_sum);
}
+static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
+{
+ __kstat_incr_irqs_this_cpu(desc);
+ desc->tot_count++;
+}
+
static inline int irq_desc_get_node(struct irq_desc *desc)
{
return irq_common_data_get_node(&desc->irq_common_data);
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 77977f55dff7..5e0ea17d01a6 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -109,6 +109,7 @@ static void desc_set_defaults(unsigned int irq, struct irq_desc *desc, int node,
desc->depth = 1;
desc->irq_count = 0;
desc->irqs_unhandled = 0;
+ desc->tot_count = 0;
desc->name = NULL;
desc->owner = owner;
for_each_possible_cpu(cpu)
@@ -880,11 +881,15 @@ unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
unsigned int kstat_irqs(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
- int cpu;
unsigned int sum = 0;
+ int cpu;
if (!desc || !desc->kstat_irqs)
return 0;
+ if (!irq_settings_is_per_cpu_devid(desc) &&
+ !irq_settings_is_per_cpu(desc))
+ return desc->tot_count;
+
for_each_possible_cpu(cpu)
sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
return sum;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 62/91] iw_cxgb4: fix srqidx leak during connection abort
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (60 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 61/91] genirq: Avoid summation loops for /proc/stat Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 63/91] fbdev: fbmem: fix memory access if logo is bigger than the screen Greg Kroah-Hartman
` (33 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Raju Rangoju, Jason Gunthorpe, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f368ff188ae4b3ef6f740a15999ea0373261b619 ]
When an application aborts the connection by moving QP from RTS to ERROR,
then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the
*srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the
connection by calling c4iw_ep_disconnect().
c4iw_ep_disconnect() does the following:
1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4.
2. sends abort request CPL to hw.
But, since the close_complete_upcall() is sent before sending the
ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the
connection holds one. Because, the srqidx is passed up to libcxgb4 only
after corresponding ABORT_RPL is processed by kernel in abort_rpl().
This patch handle the corner-case by moving the call to
close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl(). So that
libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and
libcxgb4 can relinquish the srqidx properly.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/cxgb4/cm.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index dd18b74cd01d..a2322b2dbd82 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1872,8 +1872,10 @@ static int abort_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
}
mutex_unlock(&ep->com.mutex);
- if (release)
+ if (release) {
+ close_complete_upcall(ep, -ECONNRESET);
release_ep_resources(ep);
+ }
c4iw_put_ep(&ep->com);
return 0;
}
@@ -3567,7 +3569,6 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
if (close) {
if (abrupt) {
set_bit(EP_DISC_ABORT, &ep->com.history);
- close_complete_upcall(ep, -ECONNRESET);
ret = send_abort(ep);
} else {
set_bit(EP_DISC_CLOSE, &ep->com.history);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 63/91] fbdev: fbmem: fix memory access if logo is bigger than the screen
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (61 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 62/91] iw_cxgb4: fix srqidx leak during connection abort Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 64/91] cdrom: Fix race condition in cdrom_sysctl_register Greg Kroah-Hartman
` (32 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manfred Schlaegl, Martin Kepplinger,
Daniel Vetter, Bartlomiej Zolnierkiewicz, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a5399db139cb3ad9b8502d8b1bd02da9ce0b9df0 ]
There is no clipping on the x or y axis for logos larger that the framebuffer
size. Therefore: a logo bigger than screen size leads to invalid memory access:
[ 1.254664] Backtrace:
[ 1.254728] [<c02714e0>] (cfb_imageblit) from [<c026184c>] (fb_show_logo+0x620/0x684)
[ 1.254763] r10:00000003 r9:00027fd8 r8:c6a40000 r7:c6a36e50 r6:00000000 r5:c06b81e4
[ 1.254774] r4:c6a3e800
[ 1.254810] [<c026122c>] (fb_show_logo) from [<c026c1e4>] (fbcon_switch+0x3fc/0x46c)
[ 1.254842] r10:c6a3e824 r9:c6a3e800 r8:00000000 r7:c6a0c000 r6:c070b014 r5:c6a3e800
[ 1.254852] r4:c6808c00
[ 1.254889] [<c026bde8>] (fbcon_switch) from [<c029c8f8>] (redraw_screen+0xf0/0x1e8)
[ 1.254918] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c070d5a0 r5:00000080
[ 1.254928] r4:c6808c00
[ 1.254961] [<c029c808>] (redraw_screen) from [<c029d264>] (do_bind_con_driver+0x194/0x2e4)
[ 1.254991] r9:00000000 r8:00000000 r7:00000014 r6:c070d5a0 r5:c070d5a0 r4:c070d5a0
So prevent displaying a logo bigger than screen size and avoid invalid
memory access.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/core/fbmem.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index a1d93151c059..c928190666ac 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -425,6 +425,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
{
unsigned int x;
+ if (image->width > info->var.xres || image->height > info->var.yres)
+ return;
+
if (rotate == FB_ROTATE_UR) {
for (x = 0;
x < num && image->dx + image->width <= info->var.xres;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 64/91] cdrom: Fix race condition in cdrom_sysctl_register
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (62 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 63/91] fbdev: fbmem: fix memory access if logo is bigger than the screen Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 65/91] e1000e: fix cyclic resets at link up with active tx Greg Kroah-Hartman
` (31 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Jens Axboe, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f25191bb322dec8fa2979ecb8235643aa42470e1 ]
The following traceback is sometimes seen when booting an image in qemu:
[ 54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 54.611085] Fusion MPT base driver 3.04.20
[ 54.611877] Copyright (c) 1999-2008 LSI Corporation
[ 54.616234] Fusion MPT SAS Host driver 3.04.20
[ 54.635139] sysctl duplicate entry: /dev/cdrom//info
[ 54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1
[ 54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 54.641273] Workqueue: events_unbound async_run_entry_fn
[ 54.641273] Call Trace:
[ 54.641273] dump_stack+0x67/0x90
[ 54.641273] __register_sysctl_table+0x50b/0x570
[ 54.641273] ? rcu_read_lock_sched_held+0x6f/0x80
[ 54.641273] ? kmem_cache_alloc_trace+0x1c7/0x1f0
[ 54.646814] __register_sysctl_paths+0x1c8/0x1f0
[ 54.646814] cdrom_sysctl_register.part.7+0xc/0x5f
[ 54.646814] register_cdrom.cold.24+0x2a/0x33
[ 54.646814] sr_probe+0x4bd/0x580
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] really_probe+0xd6/0x260
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] driver_probe_device+0x4a/0xb0
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] bus_for_each_drv+0x73/0xc0
[ 54.646814] __device_attach+0xd6/0x130
[ 54.646814] bus_probe_device+0x9a/0xb0
[ 54.646814] device_add+0x40c/0x670
[ 54.646814] ? __pm_runtime_resume+0x4f/0x80
[ 54.646814] scsi_sysfs_add_sdev+0x81/0x290
[ 54.646814] scsi_probe_and_add_lun+0x888/0xc00
[ 54.646814] ? scsi_autopm_get_host+0x21/0x40
[ 54.646814] __scsi_add_device+0x116/0x130
[ 54.646814] ata_scsi_scan_host+0x93/0x1c0
[ 54.646814] async_run_entry_fn+0x34/0x100
[ 54.646814] process_one_work+0x237/0x5e0
[ 54.646814] worker_thread+0x37/0x380
[ 54.646814] ? rescuer_thread+0x360/0x360
[ 54.646814] kthread+0x118/0x130
[ 54.646814] ? kthread_create_on_node+0x60/0x60
[ 54.646814] ret_from_fork+0x3a/0x50
The only sensible explanation is that cdrom_sysctl_register() is called
twice, once from the module init function and once from register_cdrom().
cdrom_sysctl_register() is not mutex protected and may happily execute
twice if the second call is made before the first call is complete.
Use a static atomic to ensure that the function is executed exactly once.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cdrom/cdrom.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index ff4280800cd0..a46f188f679e 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -265,6 +265,7 @@
/* #define ERRLOGMASK (CD_WARNING|CD_OPEN|CD_COUNT_TRACKS|CD_CLOSE) */
/* #define ERRLOGMASK (CD_WARNING|CD_REG_UNREG|CD_DO_IOCTL|CD_OPEN|CD_CLOSE|CD_COUNT_TRACKS) */
+#include <linux/atomic.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/major.h>
@@ -3683,9 +3684,9 @@ static struct ctl_table_header *cdrom_sysctl_header;
static void cdrom_sysctl_register(void)
{
- static int initialized;
+ static atomic_t initialized = ATOMIC_INIT(0);
- if (initialized == 1)
+ if (!atomic_add_unless(&initialized, 1, 1))
return;
cdrom_sysctl_header = register_sysctl_table(cdrom_root_table);
@@ -3696,8 +3697,6 @@ static void cdrom_sysctl_register(void)
cdrom_sysctl_settings.debug = debug;
cdrom_sysctl_settings.lock = lockdoor;
cdrom_sysctl_settings.check = check_media_type;
-
- initialized = 1;
}
static void cdrom_sysctl_unregister(void)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 65/91] e1000e: fix cyclic resets at link up with active tx
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (63 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 64/91] cdrom: Fix race condition in cdrom_sysctl_register Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 66/91] ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe Greg Kroah-Hartman
` (30 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Konstantin Khlebnikov, Aaron Brown,
Jeff Kirsher, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61 ]
I'm seeing series of e1000e resets (sometimes endless) at system boot
if something generates tx traffic at this time. In my case this is
netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states
have been disabled in order to enable jumbo frames" from e1000e itself.
As result e1000_watchdog_task sees used tx buffer while carrier is off
and start this reset cycle again.
[ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000
[ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 27.174495] 8021q: 802.1Q VLAN Support v1.8
[ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1
[ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 30.898564] netpoll: netconsole: local port 6666
[ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8
[ 30.898567] netpoll: netconsole: interface 'eth1'
[ 30.898568] netpoll: netconsole: remote port 6666
[ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790
[ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0
[ 30.917747] console [netcon0] enabled
[ 30.917749] netconsole: network logging started
[ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
This patch flushes tx buffers only once when carrier is off
rather than at each watchdog iteration.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index f56f8b6e2378..8bbedfc9c48f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5291,8 +5291,13 @@ static void e1000_watchdog_task(struct work_struct *work)
/* 8000ES2LAN requires a Rx packet buffer work-around
* on link down event; reset the controller to flush
* the Rx packet buffer.
+ *
+ * If the link is lost the controller stops DMA, but
+ * if there is queued Tx work it cannot be done. So
+ * reset the controller to flush the Tx packet buffers.
*/
- if (adapter->flags & FLAG_RX_NEEDS_RESTART)
+ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
+ e1000_desc_unused(tx_ring) + 1 < tx_ring->count)
adapter->flags |= FLAG_RESTART_NOW;
else
pm_schedule_suspend(netdev->dev.parent,
@@ -5315,14 +5320,6 @@ link_up:
adapter->gotc_old = adapter->stats.gotc;
spin_unlock(&adapter->stats64_lock);
- /* If the link is lost the controller stops DMA, but
- * if there is queued Tx work it cannot be done. So
- * reset the controller to flush the Tx packet buffers.
- */
- if (!netif_carrier_ok(netdev) &&
- (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
- adapter->flags |= FLAG_RESTART_NOW;
-
/* If reset is necessary, do it outside of interrupt context. */
if (adapter->flags & FLAG_RESTART_NOW) {
schedule_work(&adapter->reset_task);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 66/91] ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (64 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 65/91] e1000e: fix cyclic resets at link up with active tx Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 67/91] efi/memattr: Dont bail on zero VA if it equals the regions PA Greg Kroah-Hartman
` (29 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wen Yang, Timur Tabi, Nicolin Chen,
Xiubo Li, Fabio Estevam, Liam Girdwood, Mark Brown,
Jaroslav Kysela, Takashi Iwai, alsa-devel, linuxppc-dev,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 11907e9d3533648615db08140e3045b829d2c141 ]
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Signed-off-by: Wen Yang <yellowriver2010@hotmil.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/fsl-asoc-card.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index dffd549a0e2a..705d2524ec31 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -689,6 +689,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
asrc_fail:
of_node_put(asrc_np);
of_node_put(codec_np);
+ put_device(&cpu_pdev->dev);
fail:
of_node_put(cpu_np);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 67/91] efi/memattr: Dont bail on zero VA if it equals the regions PA
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (65 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 66/91] ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 68/91] ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation Greg Kroah-Hartman
` (28 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ard Biesheuvel, Sai Praneeth Prakhya,
AKASHI Takahiro, Alexander Graf, Bjorn Andersson,
Borislav Petkov, Heinrich Schuchardt, Jeffrey Hugo, Lee Jones,
Leif Lindholm, Linus Torvalds, Matt Fleming, Peter Jones,
Peter Zijlstra, Thomas Gleixner, linux-efi, Ingo Molnar,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5de0fef0230f3c8d75cff450a71740a7bf2db866 ]
The EFI memory attributes code cross-references the EFI memory map with
the more granular EFI memory attributes table to ensure that they are in
sync before applying the strict permissions to the regions it describes.
Since we always install virtual mappings for the EFI runtime regions to
which these strict permissions apply, we currently perform a sanity check
on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit
is set, and that the virtual address has been assigned.
However, in cases where a runtime region exists at physical address 0x0,
and the virtual mapping equals the physical mapping, e.g., when running
in mixed mode on x86, we encounter a memory descriptor with the runtime
attribute and virtual address 0x0, and incorrectly draw the conclusion
that a runtime region exists for which no virtual mapping was installed,
and give up altogether. The consequence of this is that firmware mappings
retain their read-write-execute permissions, making the system more
vulnerable to attacks.
So let's only bail if the virtual address of 0x0 has been assigned to a
physical region that does not reside at address 0x0.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 10f0d2f577053 ("efi: Implement generic support for the Memory ...")
Link: http://lkml.kernel.org/r/20190202094119.13230-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/efi/memattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/efi/memattr.c b/drivers/firmware/efi/memattr.c
index 236004b9a50d..9faa09e7c31f 100644
--- a/drivers/firmware/efi/memattr.c
+++ b/drivers/firmware/efi/memattr.c
@@ -93,7 +93,7 @@ static bool entry_is_valid(const efi_memory_desc_t *in, efi_memory_desc_t *out)
if (!(md->attribute & EFI_MEMORY_RUNTIME))
continue;
- if (md->virt_addr == 0) {
+ if (md->virt_addr == 0 && md->phys_addr != 0) {
/* no virtual mapping has been installed by the stub */
break;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 68/91] ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (66 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 67/91] efi/memattr: Dont bail on zero VA if it equals the regions PA Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 69/91] soc: qcom: gsbi: Fix error handling in gsbi_probe() Greg Kroah-Hartman
` (27 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Daney, Rob Herring,
Mathieu Malaterre, Vladimir Zapolskiy, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3e3380d0675d5e20b0af067d60cb947a4348bf9b ]
Improve the DTS files by removing all the leading "0x" and zeros to fix
the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +
For simplicity, two sed expressions were used to solve each warnings
separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[vzapolskiy: fixed commit message to pass checkpatch.pl test]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/lpc32xx.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index b5841fab51c1..0d20aadc78bb 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -230,7 +230,7 @@
status = "disabled";
};
- i2s1: i2s@2009C000 {
+ i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x2009C000 0x1000>;
};
@@ -273,7 +273,7 @@
status = "disabled";
};
- i2c1: i2c@400A0000 {
+ i2c1: i2c@400a0000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A0000 0x100>;
interrupt-parent = <&sic1>;
@@ -284,7 +284,7 @@
clocks = <&clk LPC32XX_CLK_I2C1>;
};
- i2c2: i2c@400A8000 {
+ i2c2: i2c@400a8000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A8000 0x100>;
interrupt-parent = <&sic1>;
@@ -295,7 +295,7 @@
clocks = <&clk LPC32XX_CLK_I2C2>;
};
- mpwm: mpwm@400E8000 {
+ mpwm: mpwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
reg = <0x400E8000 0x78>;
status = "disabled";
@@ -394,7 +394,7 @@
#gpio-cells = <3>; /* bank, pin, flags */
};
- timer4: timer@4002C000 {
+ timer4: timer@4002c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4002C000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -412,7 +412,7 @@
status = "disabled";
};
- watchdog: watchdog@4003C000 {
+ watchdog: watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
clocks = <&clk LPC32XX_CLK_WDOG>;
@@ -451,7 +451,7 @@
status = "disabled";
};
- timer1: timer@4004C000 {
+ timer1: timer@4004c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4004C000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@@ -475,14 +475,14 @@
status = "disabled";
};
- pwm1: pwm@4005C000 {
+ pwm1: pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
status = "disabled";
};
- pwm2: pwm@4005C004 {
+ pwm2: pwm@4005c004 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 69/91] soc: qcom: gsbi: Fix error handling in gsbi_probe()
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (67 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 68/91] ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 70/91] mt7601u: bump supported EEPROM version Greg Kroah-Hartman
` (26 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexey Khoroshilov, Bjorn Andersson,
Andy Gross, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8cd09a3dd3e176c62da67efcd477a44a8d87185e ]
If of_platform_populate() fails in gsbi_probe(),
gsbi->hclk is left undisabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/qcom_gsbi.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c
index 09c669e70d63..038abc377fdb 100644
--- a/drivers/soc/qcom/qcom_gsbi.c
+++ b/drivers/soc/qcom/qcom_gsbi.c
@@ -138,7 +138,7 @@ static int gsbi_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
struct gsbi_info *gsbi;
- int i;
+ int i, ret;
u32 mask, gsbi_num;
const struct crci_config *config = NULL;
@@ -221,7 +221,10 @@ static int gsbi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, gsbi);
- return of_platform_populate(node, NULL, NULL, &pdev->dev);
+ ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
+ if (ret)
+ clk_disable_unprepare(gsbi->hclk);
+ return ret;
}
static int gsbi_remove(struct platform_device *pdev)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 70/91] mt7601u: bump supported EEPROM version
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (68 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 69/91] soc: qcom: gsbi: Fix error handling in gsbi_probe() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 71/91] ARM: avoid Cortex-A9 livelock on tight dmb loops Greg Kroah-Hartman
` (25 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislaw Gruszka, Jakub Kicinski,
Kalle Valo, Sasha Levin, Michael
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3bd1505fed71d834f45e87b32ff07157fdda47e0 ]
As reported by Michael eeprom 0d is supported and work with the driver.
Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param
with 0d EEPORM looks like this:
RSSI offset: 0 0
Reference temp: f9
LNA gain: 8
Reg channels: 1-14
Per rate power:
raw:05 bw20:05 bw40:05
raw:05 bw20:05 bw40:05
raw:03 bw20:03 bw40:03
raw:03 bw20:03 bw40:03
raw:04 bw20:04 bw40:04
raw:00 bw20:00 bw40:00
raw:00 bw20:00 bw40:00
raw:00 bw20:00 bw40:00
raw:02 bw20:02 bw40:02
raw:00 bw20:00 bw40:00
Per channel power:
tx_power ch1:09 ch2:09
tx_power ch3:0a ch4:0a
tx_power ch5:0a ch6:0a
tx_power ch7:0b ch8:0b
tx_power ch9:0b ch10:0b
tx_power ch11:0b ch12:0b
tx_power ch13:0b ch14:0b
Reported-and-tested-by: Michael <ZeroBeat@gmx.de>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/eeprom.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.h b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
index 662d12703b69..57b503ae63f1 100644
--- a/drivers/net/wireless/mediatek/mt7601u/eeprom.h
+++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
@@ -17,7 +17,7 @@
struct mt7601u_dev;
-#define MT7601U_EE_MAX_VER 0x0c
+#define MT7601U_EE_MAX_VER 0x0d
#define MT7601U_EEPROM_SIZE 256
#define MT7601U_DEFAULT_TX_POWER 6
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 71/91] ARM: avoid Cortex-A9 livelock on tight dmb loops
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (69 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 70/91] mt7601u: bump supported EEPROM version Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 72/91] tty: increase the default flip buffer limit to 2*640K Greg Kroah-Hartman
` (24 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Will Deacon, Russell King, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5388a5b82199facacd3d7ac0d05aca6e8f902fed ]
machine_crash_nonpanic_core() does this:
while (1)
cpu_relax();
because the kernel has crashed, and we have no known safe way to deal
with the CPU. So, we place the CPU into an infinite loop which we
expect it to never exit - at least not until the system as a whole is
reset by some method.
In the absence of erratum 754327, this code assembles to:
b .
In other words, an infinite loop. When erratum 754327 is enabled,
this becomes:
1: dmb
b 1b
It has been observed that on some systems (eg, OMAP4) where, if a
crash is triggered, the system tries to kexec into the panic kernel,
but fails after taking the secondary CPU down - placing it into one
of these loops. This causes the system to livelock, and the most
noticable effect is the system stops after issuing:
Loading crashdump kernel...
to the system console.
The tested as working solution I came up with was to add wfe() to
these infinite loops thusly:
while (1) {
cpu_relax();
wfe();
}
which, without 754327 builds to:
1: wfe
b 1b
or with 754327 is enabled:
1: dmb
wfe
b 1b
Adding "wfe" does two things depending on the environment we're running
under:
- where we're running on bare metal, and the processor implements
"wfe", it stops us spinning endlessly in a loop where we're never
going to do any useful work.
- if we're running in a VM, it allows the CPU to be given back to the
hypervisor and rescheduled for other purposes (maybe a different VM)
rather than wasting CPU cycles inside a crashed VM.
However, in light of erratum 794072, Will Deacon wanted to see 10 nops
as well - which is reasonable to cover the case where we have erratum
754327 enabled _and_ we have a processor that doesn't implement the
wfe hint.
So, we now end up with:
1: wfe
b 1b
when erratum 754327 is disabled, or:
1: dmb
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
wfe
b 1b
when erratum 754327 is enabled. We also get the dmb + 10 nop
sequence elsewhere in the kernel, in terminating loops.
This is reasonable - it means we get the workaround for erratum
794072 when erratum 754327 is enabled, but still relinquish the dead
processor - either by placing it in a lower power mode when wfe is
implemented as such or by returning it to the hypervisior, or in the
case where wfe is a no-op, we use the workaround specified in erratum
794072 to avoid the problem.
These as two entirely orthogonal problems - the 10 nops addresses
erratum 794072, and the wfe is an optimisation that makes the system
more efficient when crashed either in terms of power consumption or
by allowing the host/other VMs to make use of the CPU.
I don't see any reason not to use kexec() inside a VM - it has the
potential to provide automated recovery from a failure of the VMs
kernel with the opportunity for saving a crashdump of the failure.
A panic() with a reboot timeout won't do that, and reading the
libvirt documentation, setting on_reboot to "preserve" won't either
(the documentation states "The preserve action for an on_reboot event
is treated as a destroy".) Surely it has to be a good thing to
avoiding having CPUs spinning inside a VM that is doing no useful
work.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/include/asm/barrier.h | 2 ++
arch/arm/include/asm/processor.h | 6 +++++-
arch/arm/kernel/machine_kexec.c | 5 ++++-
arch/arm/kernel/smp.c | 4 +++-
arch/arm/mach-omap2/prm_common.c | 4 +++-
5 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 513e03d138ea..8331cb0d3461 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -10,6 +10,8 @@
#define sev() __asm__ __volatile__ ("sev" : : : "memory")
#define wfe() __asm__ __volatile__ ("wfe" : : : "memory")
#define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define wfe() do { } while (0)
#endif
#if __LINUX_ARM_ARCH__ >= 7
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 8a1e8e995dae..08509183c7df 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -77,7 +77,11 @@ extern void release_thread(struct task_struct *);
unsigned long get_wchan(struct task_struct *p);
#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
-#define cpu_relax() smp_mb()
+#define cpu_relax() \
+ do { \
+ smp_mb(); \
+ __asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \
+ } while (0)
#else
#define cpu_relax() barrier()
#endif
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index b18c1ea56bed..ef6b27fe1d2e 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -87,8 +87,11 @@ void machine_crash_nonpanic_core(void *unused)
set_cpu_online(smp_processor_id(), false);
atomic_dec(&waiting_for_crash_ipi);
- while (1)
+
+ while (1) {
cpu_relax();
+ wfe();
+ }
}
static void machine_kexec_mask_interrupts(void)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index bc83ec7ed53f..7a5dc011c523 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -602,8 +602,10 @@ static void ipi_cpu_stop(unsigned int cpu)
local_fiq_disable();
local_irq_disable();
- while (1)
+ while (1) {
cpu_relax();
+ wfe();
+ }
}
static DEFINE_PER_CPU(struct completion *, cpu_completion);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index f1ca9479491b..9e14604b9642 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -533,8 +533,10 @@ void omap_prm_reset_system(void)
prm_ll_data->reset_system();
- while (1)
+ while (1) {
cpu_relax();
+ wfe();
+ }
}
/**
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 72/91] tty: increase the default flip buffer limit to 2*640K
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (70 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 71/91] ARM: avoid Cortex-A9 livelock on tight dmb loops Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 73/91] powerpc/pseries: Perform full re-add of CPU for topology update post-migration Greg Kroah-Hartman
` (23 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manfred Schlaegl, Martin Kepplinger,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7ab57b76ebf632bf2231ccabe26bea33868118c6 ]
We increase the default limit for buffer memory allocation by a factor of
10 to 640K to prevent data loss when using fast serial interfaces.
For example when using RS485 without flow-control at speeds of 1Mbit/s
an upwards we've run into problems such as applications being too slow
to read out this buffer (on embedded devices based on imx53 or imx6).
If you want to write transmitted data to a slow SD card and thus have
realtime requirements, this limit can become a problem.
That shouldn't be the case and 640K buffers fix such problems for us.
This value is a maximum limit for allocation only. It has no effect
on systems that currently run fine. When transmission is slow enough
applications and hardware can keep up and increasing this limit
doesn't change anything.
It only _allows_ to allocate more than 2*64K in cases we currently fail to
allocate memory despite having some.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/tty_buffer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 41b9a7ccce08..ca9c82ee6c35 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -25,7 +25,7 @@
* Byte threshold to limit memory consumption for flip buffers.
* The actual memory limit is > 2x this amount.
*/
-#define TTYB_DEFAULT_MEM_LIMIT 65536
+#define TTYB_DEFAULT_MEM_LIMIT (640 * 1024UL)
/*
* We default to dicing tty buffer allocations to this many characters
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 73/91] powerpc/pseries: Perform full re-add of CPU for topology update post-migration
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (71 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 72/91] tty: increase the default flip buffer limit to 2*640K Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 74/91] media: mt9m111: set initial frame size other than 0x0 Greg Kroah-Hartman
` (22 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nathan Fontenot,
Michael W. Bringmann, Michael Ellerman, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 81b61324922c67f73813d8a9c175f3c153f6a1c6 ]
On pseries systems, performing a partition migration can result in
altering the nodes a CPU is assigned to on the destination system. For
exampl, pre-migration on the source system CPUs are in node 1 and 3,
post-migration on the destination system CPUs are in nodes 2 and 3.
Handling the node change for a CPU can cause corruption in the slab
cache if we hit a timing where a CPUs node is changed while cache_reap()
is invoked. The corruption occurs because the slab cache code appears
to rely on the CPU and slab cache pages being on the same node.
The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c
does not prevent us from hitting this scenario.
Changing the device tree property update notification handler that
recognizes an affinity change for a CPU to do a full DLPAR remove and
add of the CPU instead of dynamically changing its node resolves this
issue.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Tested-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/include/asm/topology.h | 2 ++
arch/powerpc/mm/numa.c | 9 +--------
arch/powerpc/platforms/pseries/hotplug-cpu.c | 19 +++++++++++++++++++
3 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 8b3b46b7b0f2..229c91bcf616 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -90,6 +90,8 @@ static inline int prrn_is_enabled(void)
#define topology_sibling_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_core_id(cpu) (cpu_to_core_id(cpu))
+
+int dlpar_cpu_readd(int cpu);
#endif
#endif
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 0ef83c274019..9cad2ed812ab 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1540,13 +1540,6 @@ static void reset_topology_timer(void)
#ifdef CONFIG_SMP
-static void stage_topology_update(int core_id)
-{
- cpumask_or(&cpu_associativity_changes_mask,
- &cpu_associativity_changes_mask, cpu_sibling_mask(core_id));
- reset_topology_timer();
-}
-
static int dt_update_callback(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -1559,7 +1552,7 @@ static int dt_update_callback(struct notifier_block *nb,
!of_prop_cmp(update->prop->name, "ibm,associativity")) {
u32 core_id;
of_property_read_u32(update->dn, "reg", &core_id);
- stage_topology_update(core_id);
+ rc = dlpar_cpu_readd(core_id);
rc = NOTIFY_OK;
}
break;
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index a1b63e00b2f7..7a2beedb9740 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -785,6 +785,25 @@ static int dlpar_cpu_add_by_count(u32 cpus_to_add)
return rc;
}
+int dlpar_cpu_readd(int cpu)
+{
+ struct device_node *dn;
+ struct device *dev;
+ u32 drc_index;
+ int rc;
+
+ dev = get_cpu_device(cpu);
+ dn = dev->of_node;
+
+ rc = of_property_read_u32(dn, "ibm,my-drc-index", &drc_index);
+
+ rc = dlpar_cpu_remove_by_index(drc_index);
+ if (!rc)
+ rc = dlpar_cpu_add(drc_index);
+
+ return rc;
+}
+
int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
{
u32 count, drc_index;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 74/91] media: mt9m111: set initial frame size other than 0x0
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (72 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 73/91] powerpc/pseries: Perform full re-add of CPU for topology update post-migration Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.9 75/91] hwrng: virtio - Avoid repeated init of completion Greg Kroah-Hartman
` (21 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Enrico Scholz, Michael Grzeschik,
Marco Felsch, Akinobu Mita, Sakari Ailus, Mauro Carvalho Chehab,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ]
This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.
This is detected by v4l2-compliance detected.
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/mt9m111.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index 72e71b762827..a6145877bd00 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -974,6 +974,8 @@ static int mt9m111_probe(struct i2c_client *client,
mt9m111->rect.top = MT9M111_MIN_DARK_ROWS;
mt9m111->rect.width = MT9M111_MAX_WIDTH;
mt9m111->rect.height = MT9M111_MAX_HEIGHT;
+ mt9m111->width = mt9m111->rect.width;
+ mt9m111->height = mt9m111->rect.height;
mt9m111->fmt = &mt9m111_colour_fmts[0];
mt9m111->lastpage = -1;
mutex_init(&mt9m111->power_lock);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 75/91] hwrng: virtio - Avoid repeated init of completion
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (73 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 74/91] media: mt9m111: set initial frame size other than 0x0 Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 76/91] soc/tegra: fuse: Fix illegal free of IO base address Greg Kroah-Hartman
` (20 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Tolnay, Herbert Xu, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit aef027db48da56b6f25d0e54c07c8401ada6ce21 ]
The virtio-rng driver uses a completion called have_data to wait for a
virtio read to be fulfilled by the hypervisor. The completion is reset
before placing a buffer on the virtio queue and completed by the virtio
callback once data has been written into the buffer.
Prior to this commit, the driver called init_completion on this
completion both during probe as well as when registering virtio buffers
as part of a hwrng read operation. The second of these init_completion
calls should instead be reinit_completion because the have_data
completion has already been inited by probe. As described in
Documentation/scheduler/completion.txt, "Calling init_completion() twice
on the same completion object is most likely a bug".
This bug was present in the initial implementation of virtio-rng in
f7f510ec1957 ("virtio: An entropy device, as suggested by hpa"). Back
then the have_data completion was a single static completion rather than
a member of one of potentially multiple virtrng_info structs as
implemented later by 08e53fbdb85c ("virtio-rng: support multiple
virtio-rng devices"). The original driver incorrectly used
init_completion rather than INIT_COMPLETION to reset have_data during
read.
Tested by running `head -c48 /dev/random | hexdump` within crosvm, the
Chrome OS virtual machine monitor, and confirming that the virtio-rng
driver successfully produces random bytes from the host.
Signed-off-by: David Tolnay <dtolnay@gmail.com>
Tested-by: David Tolnay <dtolnay@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/hw_random/virtio-rng.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 3fa2f8a009b3..1c5c4314c6b5 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -73,7 +73,7 @@ static int virtio_read(struct hwrng *rng, void *buf, size_t size, bool wait)
if (!vi->busy) {
vi->busy = true;
- init_completion(&vi->have_data);
+ reinit_completion(&vi->have_data);
register_buffer(vi, buf, size);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 76/91] soc/tegra: fuse: Fix illegal free of IO base address
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (74 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.9 75/91] hwrng: virtio - Avoid repeated init of completion Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 77/91] HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit Greg Kroah-Hartman
` (19 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Timo Alho, Jon Hunter,
Thierry Reding, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 51294bf6b9e897d595466dcda5a3f2751906a200 ]
On cases where device tree entries for fuse and clock provider are in
different order, fuse driver needs to defer probing. This leads to
freeing incorrect IO base address as the fuse->base variable gets
overwritten once during first probe invocation. This leads to the
following spew during boot:
[ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94)
[ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8
[ 3.082318] Modules linked in:
[ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1
[ 3.082340] Hardware name: quill (DT)
[ 3.082353] Workqueue: events deferred_probe_work_func
[ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 3.082372] pc : __vunmap+0xcc/0xd8
[ 3.082379] lr : __vunmap+0xcc/0xd8
[ 3.082385] sp : ffff00000a1d3b60
[ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000
[ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610
[ 3.082413] x25: 0000000000000000 x24: 0000000000000009
[ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000
[ 3.082432] x21: 0000000000000000 x20: 0000000000000000
[ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff
[ 3.082452] x17: 0000000000000000 x16: 0000000000000000
[ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720
[ 3.082471] x13: 0720072007200720 x12: 0720072907340739
[ 3.082481] x11: 0764076607380765 x10: 0766076307300730
[ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720
[ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102
[ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000
[ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8
[ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000
[ 3.082538] Call trace:
[ 3.082545] __vunmap+0xcc/0xd8
[ 3.082552] vunmap+0x24/0x30
[ 3.082561] __iounmap+0x2c/0x38
[ 3.082569] tegra_fuse_probe+0xc8/0x118
[ 3.082577] platform_drv_probe+0x50/0xa0
[ 3.082585] really_probe+0x1b0/0x288
[ 3.082593] driver_probe_device+0x58/0x100
[ 3.082601] __device_attach_driver+0x98/0xf0
[ 3.082609] bus_for_each_drv+0x64/0xc8
[ 3.082616] __device_attach+0xd8/0x130
[ 3.082624] device_initial_probe+0x10/0x18
[ 3.082631] bus_probe_device+0x90/0x98
[ 3.082638] deferred_probe_work_func+0x74/0xb0
[ 3.082649] process_one_work+0x1e0/0x318
[ 3.082656] worker_thread+0x228/0x450
[ 3.082664] kthread+0x128/0x130
[ 3.082672] ret_from_fork+0x10/0x18
[ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]---
Fix this by retaining the value of fuse->base until driver has
successfully probed.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/tegra/fuse/fuse-tegra.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index de2c1bfe28b5..c4f5e5bbb8dc 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -131,13 +131,17 @@ static int tegra_fuse_probe(struct platform_device *pdev)
/* take over the memory region from the early initialization */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
fuse->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(fuse->base))
- return PTR_ERR(fuse->base);
+ if (IS_ERR(fuse->base)) {
+ err = PTR_ERR(fuse->base);
+ fuse->base = base;
+ return err;
+ }
fuse->clk = devm_clk_get(&pdev->dev, "fuse");
if (IS_ERR(fuse->clk)) {
dev_err(&pdev->dev, "failed to get FUSE clock: %ld",
PTR_ERR(fuse->clk));
+ fuse->base = base;
return PTR_ERR(fuse->clk);
}
@@ -146,8 +150,10 @@ static int tegra_fuse_probe(struct platform_device *pdev)
if (fuse->soc->probe) {
err = fuse->soc->probe(fuse);
- if (err < 0)
+ if (err < 0) {
+ fuse->base = base;
return err;
+ }
}
if (tegra_fuse_create_sysfs(&pdev->dev, fuse->soc->info->size,
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 77/91] HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (75 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 76/91] soc/tegra: fuse: Fix illegal free of IO base address Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 78/91] hpet: Fix missing = character in the __setup() code of hpet_mmap_enable Greg Kroah-Hartman
` (18 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Song Hongyan, Srinivas Pandruvada,
Jiri Kosina, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2edefc056e4f0e6ec9508dd1aca2c18fa320efef ]
Host driver should handle interrupt mask register earlier than wake up ish FW
else there will be conditions when FW interrupt comes, host PIMR register still
not set ready, so move the interrupt mask setting before ish_wakeup.
Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be
conditions host driver received a busy_clear interrupt (before the busy_clear
mask bit is ready), it will return IRQ_NONE after check_generated_interrupt,
the interrupt will never be cleared, causing the DEVICE not sending following
IRQ.
Since PISR clear should not be called for the CHV device we do this change.
After the change, both ISH2HOST interrupt and busy_clear interrupt will be
considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED
from IPC_IS_BUSY check.
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/intel-ish-hid/ipc/ipc.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index 0c9ac4d5d850..41d44536aa15 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -92,7 +92,10 @@ static bool check_generated_interrupt(struct ishtp_device *dev)
IPC_INT_FROM_ISH_TO_HOST_CHV_AB(pisr_val);
} else {
pisr_val = ish_reg_read(dev, IPC_REG_PISR_BXT);
- interrupt_generated = IPC_INT_FROM_ISH_TO_HOST_BXT(pisr_val);
+ interrupt_generated = !!pisr_val;
+ /* only busy-clear bit is RW, others are RO */
+ if (pisr_val)
+ ish_reg_write(dev, IPC_REG_PISR_BXT, pisr_val);
}
return interrupt_generated;
@@ -795,11 +798,11 @@ int ish_hw_start(struct ishtp_device *dev)
{
ish_set_host_rdy(dev);
+ set_host_ready(dev);
+
/* After that we can enable ISH DMA operation and wakeup ISHFW */
ish_wakeup(dev);
- set_host_ready(dev);
-
/* wait for FW-initiated reset flow */
if (!dev->recvd_hw_ready)
wait_event_interruptible_timeout(dev->wait_hw_ready,
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 78/91] hpet: Fix missing = character in the __setup() code of hpet_mmap_enable
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (76 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 77/91] HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 79/91] dmaengine: imx-dma: fix warning comparison of distinct pointer types Greg Kroah-Hartman
` (17 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Buland Singh, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 24d48a61f2666630da130cc2ec2e526eacf229e3 ]
Commit '3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.
Before this patch:
dmesg output with the kernel command line parameter hpet_mmap=1
[ 0.204152] HPET mmap disabled
dmesg output with the kernel command line parameter hpet_mmap=0
[ 0.204192] HPET mmap disabled
After this patch:
dmesg output with the kernel command line parameter hpet_mmap=1
[ 0.203945] HPET mmap enabled
dmesg output with the kernel command line parameter hpet_mmap=0
[ 0.204652] HPET mmap disabled
Fixes: 3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: Buland Singh <bsingh@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/hpet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 50272fe81f26..818a8d40e5c9 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -376,7 +376,7 @@ static __init int hpet_mmap_enable(char *str)
pr_info("HPET mmap %s\n", hpet_mmap_enabled ? "enabled" : "disabled");
return 1;
}
-__setup("hpet_mmap", hpet_mmap_enable);
+__setup("hpet_mmap=", hpet_mmap_enable);
static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
{
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 79/91] dmaengine: imx-dma: fix warning comparison of distinct pointer types
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (77 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 78/91] hpet: Fix missing = character in the __setup() code of hpet_mmap_enable Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 80/91] dmaengine: qcom_hidma: assign channel cookie correctly Greg Kroah-Hartman
` (16 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Anders Roxell, Olof Johansson,
Fabio Estevam, Vinod Koul, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9227ab5643cb8350449502dd9e3168a873ab0e3b ]
The warning got introduced by commit 930507c18304 ("arm64: add basic
Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning
haven't been seen before since size_t was 'unsigned int' when built on
arm32.
../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’:
../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^~
../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~
../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
#define min(x, y) __careful_cmp(x, y, <)
^~~~~~~~~~~~~
../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’
now = min(d->len, sg_dma_len(sg));
^~~
Rework so that we use min_t and pass in the size_t that returns the
minimum of two values, using the specified type.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/imx-dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index 1cfa1d9bc971..f8786f60cdc1 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -290,7 +290,7 @@ static inline int imxdma_sg_next(struct imxdma_desc *d)
struct scatterlist *sg = d->sg;
unsigned long now;
- now = min(d->len, sg_dma_len(sg));
+ now = min_t(size_t, d->len, sg_dma_len(sg));
if (d->len != IMX_DMA_LENGTH_LOOP)
d->len -= now;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 80/91] dmaengine: qcom_hidma: assign channel cookie correctly
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (78 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 79/91] dmaengine: imx-dma: fix warning comparison of distinct pointer types Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 81/91] netfilter: physdev: relax br_netfilter dependency Greg Kroah-Hartman
` (15 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joey Zheng, Sinan Kaya,
Shunyong Yang, Vinod Koul, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 546c0547555efca8ba8c120716c325435e29df1b ]
When dma_cookie_complete() is called in hidma_process_completed(),
dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then,
hidma_txn_is_success() will be called to use channel cookie
mchan->last_success to do additional DMA status check. Current code
assigns mchan->last_success after dma_cookie_complete(). This causes
a race condition of dma_cookie_status() returns DMA_COMPLETE before
mchan->last_success is assigned correctly. The race will cause
hidma_tx_status() return DMA_ERROR but the transaction is actually a
success. Moreover, in async_tx case, it will cause a timeout panic
in async_tx_quiesce().
Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for
transaction
...
Call trace:
[<ffff000008089994>] dump_backtrace+0x0/0x1f4
[<ffff000008089bac>] show_stack+0x24/0x2c
[<ffff00000891e198>] dump_stack+0x84/0xa8
[<ffff0000080da544>] panic+0x12c/0x29c
[<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx]
[<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx]
[<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456]
[<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456]
[<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456]
[<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456]
[<ffff000008736538>] md_thread+0x108/0x168
[<ffff0000080fb1cc>] kthread+0x10c/0x138
[<ffff000008084d34>] ret_from_fork+0x10/0x18
Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/qcom/hidma.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index e244e10a94b5..5444f39bf939 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -131,24 +131,25 @@ static void hidma_process_completed(struct hidma_chan *mchan)
desc = &mdesc->desc;
last_cookie = desc->cookie;
+ llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
+
spin_lock_irqsave(&mchan->lock, irqflags);
+ if (llstat == DMA_COMPLETE) {
+ mchan->last_success = last_cookie;
+ result.result = DMA_TRANS_NOERROR;
+ } else {
+ result.result = DMA_TRANS_ABORTED;
+ }
+
dma_cookie_complete(desc);
spin_unlock_irqrestore(&mchan->lock, irqflags);
- llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
dmaengine_desc_get_callback(desc, &cb);
dma_run_dependencies(desc);
spin_lock_irqsave(&mchan->lock, irqflags);
list_move(&mdesc->node, &mchan->free);
-
- if (llstat == DMA_COMPLETE) {
- mchan->last_success = last_cookie;
- result.result = DMA_TRANS_NOERROR;
- } else
- result.result = DMA_TRANS_ABORTED;
-
spin_unlock_irqrestore(&mchan->lock, irqflags);
dmaengine_desc_callback_invoke(&cb, &result);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 81/91] netfilter: physdev: relax br_netfilter dependency
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (79 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 80/91] dmaengine: qcom_hidma: assign channel cookie correctly Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 82/91] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration Greg Kroah-Hartman
` (14 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Westphal, Pablo Neira Ayuso,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8e2f311a68494a6677c1724bdcb10bada21af37c ]
Following command:
iptables -D FORWARD -m physdev ...
causes connectivity loss in some setups.
Reason is that iptables userspace will probe kernel for the module revision
of the physdev patch, and physdev has an artificial dependency on
br_netfilter (xt_physdev use makes no sense unless a br_netfilter module
is loaded).
This causes the "phydev" module to be loaded, which in turn enables the
"call-iptables" infrastructure.
bridged packets might then get dropped by the iptables ruleset.
The better fix would be to change the "call-iptables" defaults to 0 and
enforce explicit setting to 1, but that breaks backwards compatibility.
This does the next best thing: add a request_module call to checkentry.
This was a stray '-D ... -m physdev' won't activate br_netfilter
anymore.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/netfilter/br_netfilter.h | 1 -
net/bridge/br_netfilter_hooks.c | 5 -----
net/netfilter/xt_physdev.c | 9 +++++++--
3 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/include/net/netfilter/br_netfilter.h b/include/net/netfilter/br_netfilter.h
index 0b0c35c37125..238d1b83a45a 100644
--- a/include/net/netfilter/br_netfilter.h
+++ b/include/net/netfilter/br_netfilter.h
@@ -48,7 +48,6 @@ static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
}
struct net_device *setup_pre_routing(struct sk_buff *skb);
-void br_netfilter_enable(void);
#if IS_ENABLED(CONFIG_IPV6)
int br_validate_ipv6(struct net *net, struct sk_buff *skb);
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 7e42c0d1f55b..38865deab3ac 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -878,11 +878,6 @@ static const struct nf_br_ops br_ops = {
.br_dev_xmit_hook = br_nf_dev_xmit,
};
-void br_netfilter_enable(void)
-{
-}
-EXPORT_SYMBOL_GPL(br_netfilter_enable);
-
/* For br_nf_post_routing, we need (prio = NF_BR_PRI_LAST), because
* br_dev_queue_push_xmit is called afterwards */
static struct nf_hook_ops br_nf_ops[] __read_mostly = {
diff --git a/net/netfilter/xt_physdev.c b/net/netfilter/xt_physdev.c
index bb33598e4530..ec247d8370e8 100644
--- a/net/netfilter/xt_physdev.c
+++ b/net/netfilter/xt_physdev.c
@@ -96,8 +96,7 @@ match_outdev:
static int physdev_mt_check(const struct xt_mtchk_param *par)
{
const struct xt_physdev_info *info = par->matchinfo;
-
- br_netfilter_enable();
+ static bool brnf_probed __read_mostly;
if (!(info->bitmask & XT_PHYSDEV_OP_MASK) ||
info->bitmask & ~XT_PHYSDEV_OP_MASK)
@@ -113,6 +112,12 @@ static int physdev_mt_check(const struct xt_mtchk_param *par)
if (par->hook_mask & (1 << NF_INET_LOCAL_OUT))
return -EINVAL;
}
+
+ if (!brnf_probed) {
+ brnf_probed = true;
+ request_module("br_netfilter");
+ }
+
return 0;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 82/91] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (80 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 81/91] netfilter: physdev: relax br_netfilter dependency Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 83/91] regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting Greg Kroah-Hartman
` (13 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pawe? Chmiel, Jacek Anaszewski,
Mauro Carvalho Chehab, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]
Previously when doing format enumeration, it was returning all
formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
supported by hw will be returned. Similar thing is already done
in s5p_jpeg_find_format.
It was found by using v4l2-compliance tool and checking result
of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.
Tested on s5pv210-galaxys (Samsung i9000 phone).
Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/s5p-jpeg/jpeg-core.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 06e2b72d07ca..c89922fb42ce 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -1264,13 +1264,16 @@ static int s5p_jpeg_querycap(struct file *file, void *priv,
return 0;
}
-static int enum_fmt(struct s5p_jpeg_fmt *sjpeg_formats, int n,
+static int enum_fmt(struct s5p_jpeg_ctx *ctx,
+ struct s5p_jpeg_fmt *sjpeg_formats, int n,
struct v4l2_fmtdesc *f, u32 type)
{
int i, num = 0;
+ unsigned int fmt_ver_flag = ctx->jpeg->variant->fmt_ver_flag;
for (i = 0; i < n; ++i) {
- if (sjpeg_formats[i].flags & type) {
+ if (sjpeg_formats[i].flags & type &&
+ sjpeg_formats[i].flags & fmt_ver_flag) {
/* index-th format of type type found ? */
if (num == f->index)
break;
@@ -1297,11 +1300,11 @@ static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
if (ctx->mode == S5P_JPEG_ENCODE)
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
SJPEG_FMT_FLAG_ENC_CAPTURE);
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
- SJPEG_FMT_FLAG_DEC_CAPTURE);
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ SJPEG_FMT_FLAG_DEC_CAPTURE);
}
static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
@@ -1310,11 +1313,11 @@ static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
if (ctx->mode == S5P_JPEG_ENCODE)
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
SJPEG_FMT_FLAG_ENC_OUTPUT);
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
- SJPEG_FMT_FLAG_DEC_OUTPUT);
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ SJPEG_FMT_FLAG_DEC_OUTPUT);
}
static struct s5p_jpeg_q_data *get_q_data(struct s5p_jpeg_ctx *ctx,
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 83/91] regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (81 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 82/91] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 84/91] drm/nouveau: Stop using drm_crtc_force_disable Greg Kroah-Hartman
` (12 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Axel Lin, Mark Brown, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ]
The act8600_sudcdc_voltage_ranges setting does not match the datasheet.
The problems in below entry:
REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
1. The off-by-one min_sel causes wrong volatage calculation.
The min_sel should be 192.
2. According to the datasheet[1] Table 7. (on page 43):
The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V.
Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM.
[1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf
Fixes: df3a950e4e73 ("regulator: act8865: Add act8600 support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/act8865-regulator.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 7652477e6a9d..39e8d60df060 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -131,7 +131,7 @@
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
-#define ACT8600_SUDCDC_VOLTAGE_NUM 255
+#define ACT8600_SUDCDC_VOLTAGE_NUM 256
struct act8865 {
struct regmap *regmap;
@@ -222,7 +222,8 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
- REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
+ REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000),
+ REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};
static struct regulator_ops act8865_ops = {
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 84/91] drm/nouveau: Stop using drm_crtc_force_disable
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (82 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 83/91] regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 85/91] x86/build: Specify elf_i386 linker emulation explicitly for i386 objects Greg Kroah-Hartman
` (11 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ville Syrjälä,
Sean Paul, Daniel Vetter, Sasha Levin, Alex Deucher
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 934c5b32a5e43d8de2ab4f1566f91d7c3bf8cb64 ]
The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.
Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.
v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 434d1e29f279..cd37d00e9723 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -750,7 +750,9 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
/* Disable the crtc to ensure a full modeset is
* performed whenever it's turned on again. */
if (crtc)
- drm_crtc_force_disable(crtc);
+ drm_crtc_helper_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y,
+ crtc->primary->fb);
}
return 0;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 85/91] x86/build: Specify elf_i386 linker emulation explicitly for i386 objects
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (83 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 84/91] drm/nouveau: Stop using drm_crtc_force_disable Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 86/91] selinux: do not override context on context mounts Greg Kroah-Hartman
` (10 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Golovin, George Rimar, Tri Vo,
Borislav Petkov, Nick Desaulniers, H. Peter Anvin, Ingo Molnar,
Michael Matz, Thomas Gleixner, morbo, ruiu, x86-ml, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 927185c124d62a9a4d35878d7f6d432a166b74e3 ]
The kernel uses the OUTPUT_FORMAT linker script command in it's linker
scripts. Most of the time, the -m option is passed to the linker with
correct architecture, but sometimes (at least for x86_64) the -m option
contradicts the OUTPUT_FORMAT directive.
Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object
files, but are linked with the -m elf_x86_64 linker flag when building
for x86_64.
The GNU linker manpage doesn't explicitly state any tie-breakers between
-m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT
overrides the emulation value specified with the -m option.
LLVM lld has a different behavior, however. When supplied with
contradicting -m and OUTPUT_FORMAT values it fails with the following
error message:
ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64
Therefore, just add the correct -m after the incorrect one (it overrides
it), so the linker invocation looks like this:
ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \
realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf
This is not a functional change for GNU ld, because (although not
explicitly documented) OUTPUT_FORMAT overrides -m EMULATION.
Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting
it in QEMU.
[ bp: massage and clarify text. ]
Suggested-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: George Rimar <grimar@accesssoftek.com>
Signed-off-by: Tri Vo <trong@android.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tri Vo <trong@android.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Matz <matz@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morbo@google.com
Cc: ndesaulniers@google.com
Cc: ruiu@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190111201012.71210-1-trong@android.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/boot/Makefile | 2 +-
arch/x86/realmode/rm/Makefile | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 3b7156f46bc1..3b16935b22bc 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -100,7 +100,7 @@ $(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
AFLAGS_header.o += -I$(objtree)/$(obj)
$(obj)/header.o: $(obj)/zoffset.h
-LDFLAGS_setup.elf := -T
+LDFLAGS_setup.elf := -m elf_i386 -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
$(call if_changed,ld)
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index 25012abc3409..ce5f431e6823 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -47,7 +47,7 @@ $(obj)/pasyms.h: $(REALMODE_OBJS) FORCE
targets += realmode.lds
$(obj)/realmode.lds: $(obj)/pasyms.h
-LDFLAGS_realmode.elf := --emit-relocs -T
+LDFLAGS_realmode.elf := -m elf_i386 --emit-relocs -T
CPPFLAGS_realmode.lds += -P -C -I$(objtree)/$(obj)
targets += realmode.elf
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 86/91] selinux: do not override context on context mounts
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (84 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 85/91] x86/build: Specify elf_i386 linker emulation explicitly for i386 objects Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 87/91] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure Greg Kroah-Hartman
` (9 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ondrej Mosnacek, Stephen Smalley,
Paul Moore, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 53e0c2aa9a59a48e3798ef193d573ade85aa80f5 ]
Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT
flag unset. This is achived by returning -EOPNOTSUPP for this case in
selinux_inode_setsecurtity() (because that function should not be called
in such case anyway) and translating this error to 0 in
selinux_inode_notifysecctx().
This fixes behavior of kernfs-based filesystems when mounted with the
'context=' option. Before this patch, if a node's context had been
explicitly set to a non-default value and later the filesystem has been
remounted with the 'context=' option, then this node would show up as
having the manually-set context and not the mount-specified one.
Steps to reproduce:
# mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified
# chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.threads
# umount /sys/fs/cgroup/unified
# mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified
Result before:
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads
Result after:
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/selinux/hooks.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index d293b546a2aa..9bd6f97ccd21 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3265,12 +3265,16 @@ static int selinux_inode_setsecurity(struct inode *inode, const char *name,
const void *value, size_t size, int flags)
{
struct inode_security_struct *isec = inode_security_novalidate(inode);
+ struct superblock_security_struct *sbsec = inode->i_sb->s_security;
u32 newsid;
int rc;
if (strcmp(name, XATTR_SELINUX_SUFFIX))
return -EOPNOTSUPP;
+ if (!(sbsec->flags & SBLABEL_MNT))
+ return -EOPNOTSUPP;
+
if (!value || !size)
return -EACCES;
@@ -5984,7 +5988,10 @@ static void selinux_inode_invalidate_secctx(struct inode *inode)
*/
static int selinux_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
{
- return selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX, ctx, ctxlen, 0);
+ int rc = selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX,
+ ctx, ctxlen, 0);
+ /* Do not return error when suppressing label (SBLABEL_MNT not set). */
+ return rc == -EOPNOTSUPP ? 0 : rc;
}
/*
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 87/91] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (85 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 86/91] selinux: do not override context on context mounts Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 88/91] x86/build: Mark per-CPU symbols as absolute explicitly for LLD Greg Kroah-Hartman
` (8 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zumeng Chen, Kalle Valo, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]
Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):
unreferenced object 0xc28a9a00 (size 512):
comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<6624adab>] kmemleak_alloc+0x40/0x74
[<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
[<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
[<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
[<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
[<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
[<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
[<7e1d425a>] process_one_work+0x284/0x42c
[<55f9432e>] worker_thread+0x2fc/0x48c
[<abb582c6>] kthread+0x148/0x160
[<63144b13>] ret_from_fork+0x14/0x2c
[< (null)>] (null)
[<1f6e7715>] 0xffffffff
Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ti/wlcore/main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 5438975c7ff2..17d32ce5d16b 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1058,8 +1058,11 @@ static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt)
goto out;
ret = wl12xx_fetch_firmware(wl, plt);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ kfree(wl->fw_status);
+ kfree(wl->raw_fw_status);
+ kfree(wl->tx_res_if);
+ }
out:
return ret;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 88/91] x86/build: Mark per-CPU symbols as absolute explicitly for LLD
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (86 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 87/91] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 89/91] dmaengine: tegra: avoid overflow of byte tracking Greg Kroah-Hartman
` (7 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Golovin,
Rafael Ávila de Espíndola, Nick Desaulniers,
Borislav Petkov, H. Peter Anvin, Andy Lutomirski, Brijesh Singh,
Cao Jin, Ingo Molnar, Joerg Roedel, Masahiro Yamada,
Masami Hiramatsu, Thomas Gleixner, Tri Vo, morbo, x86-ml,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d071ae09a4a1414c1433d5ae9908959a7325b0ad ]
Accessing per-CPU variables is done by finding the offset of the
variable in the per-CPU block and adding it to the address of the
respective CPU's block.
Section 3.10.8 of ld.bfd's documentation states:
For expressions involving numbers, relative addresses and absolute
addresses, ld follows these rules to evaluate terms:
Other binary operations, that is, between two relative addresses
not in the same section, or between a relative address and an
absolute address, first convert any non-absolute term to an
absolute address before applying the operator."
Note that LLVM's linker does not adhere to the GNU ld's implementation
and as such requires implicitly-absolute terms to be explicitly marked
as absolute in the linker script. If not, it fails currently with:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute
Makefile:1040: recipe for target 'vmlinux' failed
This is not a functional change for ld.bfd which converts the term to an
absolute symbol anyways as specified above.
Based on a previous submission by Tri Vo <trong@android.com>.
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Rafael Ávila de Espíndola <rafael@espindo.la>
[ Update commit message per Boris' and Michael's suggestions. ]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[ Massage commit message more, fix typos. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Dmitry Golovin <dima@golovin.in>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Cao Jin <caoj.fnst@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tri Vo <trong@android.com>
Cc: dima@golovin.in
Cc: morbo@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181219190145.252035-1-ndesaulniers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/vmlinux.lds.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index e783a5daaab2..55f04875293f 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -367,7 +367,7 @@ SECTIONS
* Per-cpu symbols which need to be offset from __per_cpu_load
* for the boot processor.
*/
-#define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
+#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
INIT_PER_CPU(gdt_page);
INIT_PER_CPU(irq_stack_union);
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 89/91] dmaengine: tegra: avoid overflow of byte tracking
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (87 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 88/91] x86/build: Mark per-CPU symbols as absolute explicitly for LLD Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 90/91] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers Greg Kroah-Hartman
` (6 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Osipenko, Ben Dooks,
Jon Hunter, Vinod Koul, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ]
The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.
When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.
To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.
Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/tegra20-apb-dma.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 3722b9d8d9fe..22f7f0c68a48 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -635,7 +635,10 @@ static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,
sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq), node);
dma_desc = sgreq->dma_desc;
- dma_desc->bytes_transferred += sgreq->req_len;
+ /* if we dma for long enough the transfer count will wrap */
+ dma_desc->bytes_transferred =
+ (dma_desc->bytes_transferred + sgreq->req_len) %
+ dma_desc->bytes_requested;
/* Callback need to be call */
if (!dma_desc->cb_count)
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 90/91] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (88 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 89/91] dmaengine: tegra: avoid overflow of byte tracking Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.9 91/91] ACPI / video: Extend chassis-type detection with a "Lunch Box" check Greg Kroah-Hartman
` (5 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian Vincent,
Ville Syrjälä,
Dhinakaran Pandiyan, Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ]
We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.
To quote the E-DDC spec:
"... this standard requires that the segment pointer be
reset to 00h when a NO ACK or a STOP condition is received."
Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.
Cc: Brian Vincent <brainn@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index b59441d109a5..4a959740058e 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3069,6 +3069,7 @@ static int drm_dp_mst_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs
msg.u.i2c_read.transactions[i].i2c_dev_id = msgs[i].addr;
msg.u.i2c_read.transactions[i].num_bytes = msgs[i].len;
msg.u.i2c_read.transactions[i].bytes = msgs[i].buf;
+ msg.u.i2c_read.transactions[i].no_stop_bit = !(msgs[i].flags & I2C_M_STOP);
}
msg.u.i2c_read.read_i2c_device_id = msgs[num - 1].addr;
msg.u.i2c_read.num_bytes_read = msgs[num - 1].len;
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* [PATCH 4.9 91/91] ACPI / video: Extend chassis-type detection with a "Lunch Box" check
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (89 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 90/91] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 16:44 ` [PATCH 4.9 00/91] 4.9.168-stable review kernelci.org bot
` (4 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Rafael J. Wysocki,
Sasha Levin
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d693c008e3ca04db5916ff72e68ce661888a913b ]
Commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") introduced chassis type detection, limiting the
lcd_only check for the backlight to devices where the chassis-type
indicates their is no builtin LCD panel.
The purpose of the lcd_only check is to avoid advertising a backlight
interface on desktops, since skylake and newer machines seem to always
have a backlight interface even if there is no LCD panel. The limiting
of this check to desktops only was done to avoid breaking backlight
support on some laptops which do not have the lcd flag set.
The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine
has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check
we end up falsely advertising backlight/brightness control on this
device. This commit extend the dmi_is_desktop check to return true
for type 0x10 to fix this.
Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpi_video.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index d79e38abd6d9..ea0573176894 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2088,6 +2088,7 @@ static bool dmi_is_desktop(void)
case 0x05: /* Pizza Box */
case 0x06: /* Mini Tower */
case 0x07: /* Tower */
+ case 0x10: /* Lunch Box */
case 0x11: /* Main Server Chassis */
return true;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 97+ messages in thread* Re: [PATCH 4.9 00/91] 4.9.168-stable review
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (90 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.9 91/91] ACPI / video: Extend chassis-type detection with a "Lunch Box" check Greg Kroah-Hartman
@ 2019-04-04 16:44 ` kernelci.org bot
2019-04-05 3:14 ` Naresh Kamboju
` (3 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: kernelci.org bot @ 2019-04-04 16:44 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
ben.hutchings, lkft-triage, stable
stable-rc/linux-4.9.y boot: 101 boots: 0 failed, 82 passed with 18 offline, 1 untried/unknown (v4.9.167-92-gea283005c82d)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.167-92-gea283005c82d/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.167-92-gea283005c82d/
Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.167-92-gea283005c82d
Git Commit: ea283005c82dc0416d18a004588a21ee706cfabd
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 50 unique boards, 22 SoC families, 15 builds out of 197
Offline Platforms:
arm:
bcm2835_defconfig:
gcc-7
bcm2835-rpi-b: 1 offline lab
multi_v7_defconfig:
gcc-7
alpine-db: 1 offline lab
at91-sama5d4_xplained: 1 offline lab
qcom-apq8064-cm-qs600: 1 offline lab
qcom-apq8064-ifc6410: 1 offline lab
socfpga_cyclone5_de0_sockit: 1 offline lab
sun5i-r8-chip: 1 offline lab
tegra124-jetson-tk1: 1 offline lab
tegra20-iris-512: 1 offline lab
sunxi_defconfig:
gcc-7
sun5i-r8-chip: 1 offline lab
socfpga_defconfig:
gcc-7
socfpga_cyclone5_de0_sockit: 1 offline lab
tegra_defconfig:
gcc-7
tegra124-jetson-tk1: 1 offline lab
tegra20-iris-512: 1 offline lab
sama5_defconfig:
gcc-7
at91-sama5d4_xplained: 1 offline lab
qcom_defconfig:
gcc-7
qcom-apq8064-cm-qs600: 1 offline lab
qcom-apq8064-ifc6410: 1 offline lab
arm64:
defconfig:
gcc-7
apq8016-sbc: 1 offline lab
juno-r2: 1 offline lab
---
For more info write to <info@kernelci.org>
^ permalink raw reply [flat|nested] 97+ messages in thread* Re: [PATCH 4.9 00/91] 4.9.168-stable review
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (91 preceding siblings ...)
2019-04-04 16:44 ` [PATCH 4.9 00/91] 4.9.168-stable review kernelci.org bot
@ 2019-04-05 3:14 ` Naresh Kamboju
2019-04-05 15:26 ` shuah
` (2 subsequent siblings)
95 siblings, 0 replies; 97+ messages in thread
From: Naresh Kamboju @ 2019-04-05 3:14 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
Shuah Khan, patches, Ben Hutchings, lkft-triage, linux- stable
On Thu, 4 Apr 2019 at 14:20, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.168 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 6 08:44:27 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.168-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.9.168-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: ba980237d739a2beb8f17095af6ce29de69ef51f
git describe: v4.9.167-91-gba980237d739
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.167-91-gba980237d739
No regressions (compared to build v4.9.166-149-gea283005c82d)
No fixes (compared to build v4.9.166-149-gea283005c82d)
Ran 22706 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 97+ messages in thread* Re: [PATCH 4.9 00/91] 4.9.168-stable review
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (92 preceding siblings ...)
2019-04-05 3:14 ` Naresh Kamboju
@ 2019-04-05 15:26 ` shuah
2019-04-05 15:36 ` Jon Hunter
2019-04-05 18:30 ` Guenter Roeck
95 siblings, 0 replies; 97+ messages in thread
From: shuah @ 2019-04-05 15:26 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, patches, ben.hutchings, lkft-triage,
stable, shuah
On 4/4/19 2:46 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.168 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 6 08:44:27 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.168-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 97+ messages in thread* Re: [PATCH 4.9 00/91] 4.9.168-stable review
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (93 preceding siblings ...)
2019-04-05 15:26 ` shuah
@ 2019-04-05 15:36 ` Jon Hunter
2019-04-05 18:30 ` Guenter Roeck
95 siblings, 0 replies; 97+ messages in thread
From: Jon Hunter @ 2019-04-05 15:36 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
lkft-triage, stable, linux-tegra
On 04/04/2019 09:46, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.168 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 6 08:44:27 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.168-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.9:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
22 tests: 22 pass, 0 fail
Linux version: 4.9.168-rc1-gea28300
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 97+ messages in thread* Re: [PATCH 4.9 00/91] 4.9.168-stable review
2019-04-04 8:46 [PATCH 4.9 00/91] 4.9.168-stable review Greg Kroah-Hartman
` (94 preceding siblings ...)
2019-04-05 15:36 ` Jon Hunter
@ 2019-04-05 18:30 ` Guenter Roeck
95 siblings, 0 replies; 97+ messages in thread
From: Guenter Roeck @ 2019-04-05 18:30 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, ben.hutchings,
lkft-triage, stable
On Thu, Apr 04, 2019 at 10:46:44AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.168 release.
> There are 91 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 6 08:44:27 UTC 2019.
> Anything received after that time might be too late.
>
For v4.9.167-91-gba980237d739:
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 316 pass: 316 fail: 0
Guenter
^ permalink raw reply [flat|nested] 97+ messages in thread