* [PATCH 4.19 001/187] arm64: debug: Dont propagate UNKNOWN FAR into si_code for debug signals
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 002/187] ext4: cleanup bh release code in ext4_ind_remove_space() Greg Kroah-Hartman
` (190 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Rutland, Will Deacon, Catalin Marinas
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <will.deacon@arm.com>
commit b9a4b9d084d978f80eb9210727c81804588b42ff upstream.
FAR_EL1 is UNKNOWN for all debug exceptions other than those caused by
taking a hardware watchpoint. Unfortunately, if a debug handler returns
a non-zero value, then we will propagate the UNKNOWN FAR value to
userspace via the si_addr field of the SIGTRAP siginfo_t.
Instead, let's set si_addr to take on the PC of the faulting instruction,
which we have available in the current pt_regs.
Cc: <stable@vger.kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/mm/fault.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -827,11 +827,12 @@ void __init hook_debug_fault_code(int nr
debug_fault_info[nr].name = name;
}
-asmlinkage int __exception do_debug_exception(unsigned long addr,
+asmlinkage int __exception do_debug_exception(unsigned long addr_if_watchpoint,
unsigned int esr,
struct pt_regs *regs)
{
const struct fault_info *inf = debug_fault_info + DBG_ESR_EVT(esr);
+ unsigned long pc = instruction_pointer(regs);
int rv;
/*
@@ -841,10 +842,10 @@ asmlinkage int __exception do_debug_exce
if (interrupts_enabled(regs))
trace_hardirqs_off();
- if (user_mode(regs) && instruction_pointer(regs) > TASK_SIZE)
+ if (user_mode(regs) && pc > TASK_SIZE)
arm64_apply_bp_hardening();
- if (!inf->fn(addr, esr, regs)) {
+ if (!inf->fn(addr_if_watchpoint, esr, regs)) {
rv = 1;
} else {
struct siginfo info;
@@ -853,7 +854,7 @@ asmlinkage int __exception do_debug_exce
info.si_signo = inf->sig;
info.si_errno = 0;
info.si_code = inf->code;
- info.si_addr = (void __user *)addr;
+ info.si_addr = (void __user *)pc;
arm64_notify_die(inf->name, regs, &info, esr);
rv = 0;
}
^ permalink raw reply [flat|nested] 196+ messages in thread* [PATCH 4.19 002/187] ext4: cleanup bh release code in ext4_ind_remove_space()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 001/187] arm64: debug: Dont propagate UNKNOWN FAR into si_code for debug signals Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 003/187] tty/serial: atmel: Add is_half_duplex helper Greg Kroah-Hartman
` (189 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, zhangyi (F),
Theodore Tso, Jan Kara, Jari Ruusu
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <yi.zhang@huawei.com>
commit 5e86bdda41534e17621d5a071b294943cae4376e upstream.
Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we
may probably forget to release the buffer some day. This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jari Ruusu <jari.ruusu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/indirect.c | 47 ++++++++++++++++++++++-------------------------
1 file changed, 22 insertions(+), 25 deletions(-)
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -1219,6 +1219,7 @@ int ext4_ind_remove_space(handle_t *hand
ext4_lblk_t offsets[4], offsets2[4];
Indirect chain[4], chain2[4];
Indirect *partial, *partial2;
+ Indirect *p = NULL, *p2 = NULL;
ext4_lblk_t max_block;
__le32 nr = 0, nr2 = 0;
int n = 0, n2 = 0;
@@ -1260,7 +1261,7 @@ int ext4_ind_remove_space(handle_t *hand
}
- partial = ext4_find_shared(inode, n, offsets, chain, &nr);
+ partial = p = ext4_find_shared(inode, n, offsets, chain, &nr);
if (nr) {
if (partial == chain) {
/* Shared branch grows from the inode */
@@ -1285,13 +1286,11 @@ int ext4_ind_remove_space(handle_t *hand
partial->p + 1,
(__le32 *)partial->bh->b_data+addr_per_block,
(chain+n-1) - partial);
- BUFFER_TRACE(partial->bh, "call brelse");
- brelse(partial->bh);
partial--;
}
end_range:
- partial2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
+ partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
if (nr2) {
if (partial2 == chain2) {
/*
@@ -1321,16 +1320,14 @@ end_range:
(__le32 *)partial2->bh->b_data,
partial2->p,
(chain2+n2-1) - partial2);
- BUFFER_TRACE(partial2->bh, "call brelse");
- brelse(partial2->bh);
partial2--;
}
goto do_indirects;
}
/* Punch happened within the same level (n == n2) */
- partial = ext4_find_shared(inode, n, offsets, chain, &nr);
- partial2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
+ partial = p = ext4_find_shared(inode, n, offsets, chain, &nr);
+ partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
/* Free top, but only if partial2 isn't its subtree. */
if (nr) {
@@ -1387,15 +1384,7 @@ end_range:
partial->p + 1,
partial2->p,
(chain+n-1) - partial);
- while (partial > chain) {
- BUFFER_TRACE(partial->bh, "call brelse");
- brelse(partial->bh);
- }
- while (partial2 > chain2) {
- BUFFER_TRACE(partial2->bh, "call brelse");
- brelse(partial2->bh);
- }
- return 0;
+ goto cleanup;
}
/*
@@ -1410,8 +1399,6 @@ end_range:
partial->p + 1,
(__le32 *)partial->bh->b_data+addr_per_block,
(chain+n-1) - partial);
- BUFFER_TRACE(partial->bh, "call brelse");
- brelse(partial->bh);
partial--;
}
if (partial2 > chain2 && depth2 <= depth) {
@@ -1419,11 +1406,21 @@ end_range:
(__le32 *)partial2->bh->b_data,
partial2->p,
(chain2+n2-1) - partial2);
- BUFFER_TRACE(partial2->bh, "call brelse");
- brelse(partial2->bh);
partial2--;
}
}
+
+cleanup:
+ while (p && p > chain) {
+ BUFFER_TRACE(p->bh, "call brelse");
+ brelse(p->bh);
+ p--;
+ }
+ while (p2 && p2 > chain2) {
+ BUFFER_TRACE(p2->bh, "call brelse");
+ brelse(p2->bh);
+ p2--;
+ }
return 0;
do_indirects:
@@ -1431,7 +1428,7 @@ do_indirects:
switch (offsets[0]) {
default:
if (++n >= n2)
- return 0;
+ break;
nr = i_data[EXT4_IND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1);
@@ -1439,7 +1436,7 @@ do_indirects:
}
case EXT4_IND_BLOCK:
if (++n >= n2)
- return 0;
+ break;
nr = i_data[EXT4_DIND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2);
@@ -1447,7 +1444,7 @@ do_indirects:
}
case EXT4_DIND_BLOCK:
if (++n >= n2)
- return 0;
+ break;
nr = i_data[EXT4_TIND_BLOCK];
if (nr) {
ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3);
@@ -1456,5 +1453,5 @@ do_indirects:
case EXT4_TIND_BLOCK:
;
}
- return 0;
+ goto cleanup;
}
^ permalink raw reply [flat|nested] 196+ messages in thread* [PATCH 4.19 003/187] tty/serial: atmel: Add is_half_duplex helper
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 001/187] arm64: debug: Dont propagate UNKNOWN FAR into si_code for debug signals Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 002/187] ext4: cleanup bh release code in ext4_ind_remove_space() Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 004/187] tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped Greg Kroah-Hartman
` (188 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Razvan Stefanescu, Richard Genoud
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Razvan Stefanescu <razvan.stefanescu@microchip.com>
commit f3040983132bf3477acd45d2452a906e67c2fec9 upstream.
Use a helper function to check that a port needs to use half duplex
communication, replacing several occurrences of multi-line bit checking.
Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/atmel_serial.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -225,6 +225,12 @@ static inline void atmel_uart_write_char
__raw_writeb(value, port->membase + ATMEL_US_THR);
}
+static inline int atmel_uart_is_half_duplex(struct uart_port *port)
+{
+ return (port->rs485.flags & SER_RS485_ENABLED) &&
+ !(port->rs485.flags & SER_RS485_RX_DURING_TX);
+}
+
#ifdef CONFIG_SERIAL_ATMEL_PDC
static bool atmel_use_pdc_rx(struct uart_port *port)
{
@@ -481,9 +487,9 @@ static void atmel_stop_tx(struct uart_po
/* Disable interrupts */
atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
- if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX))
+ if (atmel_uart_is_half_duplex(port))
atmel_start_rx(port);
+
}
/*
@@ -500,8 +506,7 @@ static void atmel_start_tx(struct uart_p
return;
if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port))
- if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX))
+ if (atmel_uart_is_half_duplex(port))
atmel_stop_rx(port);
if (atmel_use_pdc_tx(port))
@@ -799,8 +804,7 @@ static void atmel_complete_tx_dma(void *
*/
if (!uart_circ_empty(xmit))
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
- else if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+ else if (atmel_uart_is_half_duplex(port)) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
@@ -1377,8 +1381,7 @@ static void atmel_tx_pdc(struct uart_por
atmel_uart_writel(port, ATMEL_US_IER,
atmel_port->tx_done_mask);
} else {
- if ((port->rs485.flags & SER_RS485_ENABLED) &&
- !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+ if (atmel_uart_is_half_duplex(port)) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
^ permalink raw reply [flat|nested] 196+ messages in thread* [PATCH 4.19 004/187] tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (2 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 003/187] tty/serial: atmel: Add is_half_duplex helper Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 005/187] CIFS: fix POSIX lock leak and invalid ptr deref Greg Kroah-Hartman
` (187 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Razvan Stefanescu, Richard Genoud
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Razvan Stefanescu <razvan.stefanescu@microchip.com>
commit 69646d7a3689fbe1a65ae90397d22ac3f1b8d40f upstream.
In half-duplex operation, RX should be started after TX completes.
If DMA is used, there is a case when the DMA transfer completes but the
TX FIFO is not emptied, so the RX cannot be restarted just yet.
Use a boolean variable to store this state and rearm TX interrupt mask
to be signaled again that the transfer finished. In interrupt transmit
handler this variable is used to start RX. A warning message is generated
if RX is activated before TX fifo is cleared.
Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable
RX after TX is done")
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/atmel_serial.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -163,6 +163,8 @@ struct atmel_uart_port {
unsigned int pending_status;
spinlock_t lock_suspended;
+ bool hd_start_rx; /* can start RX during half-duplex operation */
+
#ifdef CONFIG_PM
struct {
u32 cr;
@@ -805,8 +807,13 @@ static void atmel_complete_tx_dma(void *
if (!uart_circ_empty(xmit))
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
else if (atmel_uart_is_half_duplex(port)) {
- /* DMA done, stop TX, start RX for RS485 */
- atmel_start_rx(port);
+ /*
+ * DMA done, re-enable TXEMPTY and signal that we can stop
+ * TX and start RX for RS485
+ */
+ atmel_port->hd_start_rx = true;
+ atmel_uart_writel(port, ATMEL_US_IER,
+ atmel_port->tx_done_mask);
}
spin_unlock_irqrestore(&port->lock, flags);
@@ -1252,9 +1259,20 @@ atmel_handle_transmit(struct uart_port *
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (pending & atmel_port->tx_done_mask) {
- /* Either PDC or interrupt transmission */
atmel_uart_writel(port, ATMEL_US_IDR,
atmel_port->tx_done_mask);
+
+ /* Start RX if flag was set and FIFO is empty */
+ if (atmel_port->hd_start_rx) {
+ if (!(atmel_uart_readl(port, ATMEL_US_CSR)
+ & ATMEL_US_TXEMPTY))
+ dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n");
+
+ atmel_port->hd_start_rx = false;
+ atmel_start_rx(port);
+ return;
+ }
+
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
}
}
^ permalink raw reply [flat|nested] 196+ messages in thread* [PATCH 4.19 005/187] CIFS: fix POSIX lock leak and invalid ptr deref
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (3 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 004/187] tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 006/187] h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- Greg Kroah-Hartman
` (186 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aurelien Aptel, NeilBrown,
Steve French, Pavel Shilovsky, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bc31d0cdcfbadb6258b45db97e93b1c83822ba33 ]
We have a customer reporting crashes in lock_get_status() with many
"Leaked POSIX lock" messages preceeding the crash.
Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709
Leaked POSIX lock on dev=0x0:0x4b ino...
Leaked locks on dev=0x0:0x4b ino=0xf911400000029:
POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592
stack segment: 0000 [#1] SMP
Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
Supported: Yes
CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000
RIP: 0010:[<ffffffff8125dcab>] [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0
RSP: 0018:ffff88c74005fd90 EFLAGS: 00010202
RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50
RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae
RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff
R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340
R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340
FS: 00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18
ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340
ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28
Call Trace:
[<ffffffff8125e08f>] locks_show+0x2f/0x70
[<ffffffff81230ad1>] seq_read+0x251/0x3a0
[<ffffffff81275bbc>] proc_reg_read+0x3c/0x70
[<ffffffff8120e456>] __vfs_read+0x26/0x140
[<ffffffff8120e9da>] vfs_read+0x7a/0x120
[<ffffffff8120faf2>] SyS_read+0x42/0xa0
[<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7
When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls
filp_close() which also removes all posix locks.
The lock struct is initialized like so in filp_close() and passed
down to cifs
...
lock.fl_type = F_UNLCK;
lock.fl_flags = FL_POSIX | FL_CLOSE;
lock.fl_start = 0;
lock.fl_end = OFFSET_MAX;
...
Note the FL_CLOSE flag, which hints the VFS code that this unlocking
is done for closing the fd.
filp_close()
locks_remove_posix(filp, id);
vfs_lock_file(filp, F_SETLK, &lock, NULL);
return filp->f_op->lock(filp, cmd, fl) => cifs_lock()
rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid);
rc = server->ops->mand_unlock_range(cfile, flock, xid);
if (flock->fl_flags & FL_POSIX && !rc)
rc = locks_lock_file_wait(file, flock)
Notice how we don't call locks_lock_file_wait() which does the
generic VFS lock/unlock/wait work on the inode if rc != 0.
If we are closing the handle, the SMB server is supposed to remove any
locks associated with it. Similarly, cifs.ko frees and wakes up any
lock and lock waiter when closing the file:
cifs_close()
cifsFileInfo_put(file->private_data)
/*
* Delete any outstanding lock records. We'll lose them when the file
* is closed anyway.
*/
down_write(&cifsi->lock_sem);
list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) {
list_del(&li->llist);
cifs_del_lock_waiters(li);
kfree(li);
}
list_del(&cifs_file->llist->llist);
kfree(cifs_file->llist);
up_write(&cifsi->lock_sem);
So we can safely ignore unlocking failures in cifs_lock() if they
happen with the FL_CLOSE flag hint set as both the server and the
client take care of it during the actual closing.
This is not a proper fix for the unlocking failure but it's safe and
it seems to prevent the lock leakages and crashes the customer
experiences.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/file.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 08761a6a039d..d847132ab027 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1631,8 +1631,20 @@ cifs_setlk(struct file *file, struct file_lock *flock, __u32 type,
rc = server->ops->mand_unlock_range(cfile, flock, xid);
out:
- if (flock->fl_flags & FL_POSIX && !rc)
+ if (flock->fl_flags & FL_POSIX) {
+ /*
+ * If this is a request to remove all locks because we
+ * are closing the file, it doesn't matter if the
+ * unlocking failed as both cifs.ko and the SMB server
+ * remove the lock on file close
+ */
+ if (rc) {
+ cifs_dbg(VFS, "%s failed rc=%d\n", __func__, rc);
+ if (!(flock->fl_flags & FL_CLOSE))
+ return rc;
+ }
rc = locks_lock_file_wait(file, flock);
+ }
return rc;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 006/187] h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux-
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (4 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 005/187] CIFS: fix POSIX lock leak and invalid ptr deref Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 007/187] f2fs: fix to adapt small inline xattr space in __find_inline_xattr() Greg Kroah-Hartman
` (185 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fc2b47b55f17fd996f7a01975ce1c33c2f2513f6 ]
It believe it is a bad idea to hardcode a specific compiler prefix
that may or may not be installed on a user's system. It is annoying
when testing features that should not require compilers at all.
For example, mrproper, headers_install, etc. should work without
any compiler.
They look like follows on my machine.
$ make ARCH=h8300 mrproper
./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found
./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found
make: h8300-unknown-linux-gcc: Command not found
make: h8300-unknown-linux-gcc: Command not found
[ a bunch of the same error messages continue ]
$ make ARCH=h8300 headers_install
./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found
./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found
make: h8300-unknown-linux-gcc: Command not found
HOSTCC scripts/basic/fixdep
make: h8300-unknown-linux-gcc: Command not found
WRAP arch/h8300/include/generated/uapi/asm/kvm_para.h
[ snip ]
The solution is to delete this line, or to use cc-cross-prefix like
some architectures do. I chose the latter as a moderate fixup.
I added an alternative 'h8300-linux-' because it is available at:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/h8300/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index 58634e6bae92..55f251810129 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -27,7 +27,7 @@ KBUILD_LDFLAGS += $(ldflags-y)
CHECKFLAGS += -msize-long
ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := h8300-unknown-linux-
+CROSS_COMPILE := $(call cc-cross-prefix, h8300-unknown-linux- h8300-linux-)
endif
core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 007/187] f2fs: fix to adapt small inline xattr space in __find_inline_xattr()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (5 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 006/187] h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 008/187] f2fs: fix to avoid deadlock in f2fs_read_inline_dir() Greg Kroah-Hartman
` (184 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chao Yu, Jaegeuk Kim, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2c28aba8b2e2a51749fa66e01b68e1cd5b53e022 ]
With below testcase, we will fail to find existed xattr entry:
1. mkfs.f2fs -O extra_attr -O flexible_inline_xattr /dev/zram0
2. mount -t f2fs -o inline_xattr_size=1 /dev/zram0 /mnt/f2fs/
3. touch /mnt/f2fs/file
4. setfattr -n "user.name" -v 0 /mnt/f2fs/file
5. getfattr -n "user.name" /mnt/f2fs/file
/mnt/f2fs/file: user.name: No such attribute
The reason is for inode which has very small inline xattr size,
__find_inline_xattr() will fail to traverse any entry due to first
entry may not be loaded from xattr node yet, later, we may skip to
check entire xattr datas in __find_xattr(), result in such wrong
condition.
This patch adds condition to check such case to avoid this issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/xattr.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/fs/f2fs/xattr.c b/fs/f2fs/xattr.c
index 087e53a2d96c..409a637f7a92 100644
--- a/fs/f2fs/xattr.c
+++ b/fs/f2fs/xattr.c
@@ -227,11 +227,11 @@ static struct f2fs_xattr_entry *__find_inline_xattr(struct inode *inode,
{
struct f2fs_xattr_entry *entry;
unsigned int inline_size = inline_xattr_size(inode);
+ void *max_addr = base_addr + inline_size;
list_for_each_xattr(entry, base_addr) {
- if ((void *)entry + sizeof(__u32) > base_addr + inline_size ||
- (void *)XATTR_NEXT_ENTRY(entry) + sizeof(__u32) >
- base_addr + inline_size) {
+ if ((void *)entry + sizeof(__u32) > max_addr ||
+ (void *)XATTR_NEXT_ENTRY(entry) > max_addr) {
*last_addr = entry;
return NULL;
}
@@ -242,6 +242,13 @@ static struct f2fs_xattr_entry *__find_inline_xattr(struct inode *inode,
if (!memcmp(entry->e_name, name, len))
break;
}
+
+ /* inline xattr header or entry across max inline xattr size */
+ if (IS_XATTR_LAST_ENTRY(entry) &&
+ (void *)entry + sizeof(__u32) > max_addr) {
+ *last_addr = entry;
+ return NULL;
+ }
return entry;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 008/187] f2fs: fix to avoid deadlock in f2fs_read_inline_dir()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (6 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 007/187] f2fs: fix to adapt small inline xattr space in __find_inline_xattr() Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 009/187] tracing: kdb: Fix ftdump to not sleep Greg Kroah-Hartman
` (183 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiqun Li, Chao Yu, Jaegeuk Kim, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit aadcef64b22f668c1a107b86d3521d9cac915c24 ]
As Jiqun Li reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202883
sometimes, dead lock when make system call SYS_getdents64 with fsync() is
called by another process.
monkey running on android9.0
1. task 9785 held sbi->cp_rwsem and waiting lock_page()
2. task 10349 held mm_sem and waiting sbi->cp_rwsem
3. task 9709 held lock_page() and waiting mm_sem
so this is a dead lock scenario.
task stack is show by crash tools as following
crash_arm64> bt ffffffc03c354080
PID: 9785 TASK: ffffffc03c354080 CPU: 1 COMMAND: "RxIoScheduler-3"
>> #7 [ffffffc01b50fac0] __lock_page at ffffff80081b11e8
crash-arm64> bt 10349
PID: 10349 TASK: ffffffc018b83080 CPU: 1 COMMAND: "BUGLY_ASYNC_UPL"
>> #3 [ffffffc01f8cfa40] rwsem_down_read_failed at ffffff8008a93afc
PC: 00000033 LR: 00000000 SP: 00000000 PSTATE: ffffffffffffffff
crash-arm64> bt 9709
PID: 9709 TASK: ffffffc03e7f3080 CPU: 1 COMMAND: "IntentService[A"
>> #3 [ffffffc001e67850] rwsem_down_read_failed at ffffff8008a93afc
>> #8 [ffffffc001e67b80] el1_ia at ffffff8008084fc4
PC: ffffff8008274114 [compat_filldir64+120]
LR: ffffff80083584d4 [f2fs_fill_dentries+448]
SP: ffffffc001e67b80 PSTATE: 80400145
X29: ffffffc001e67b80 X28: 0000000000000000 X27: 000000000000001a
X26: 00000000000093d7 X25: ffffffc070d52480 X24: 0000000000000008
X23: 0000000000000028 X22: 00000000d43dfd60 X21: ffffffc001e67e90
X20: 0000000000000011 X19: ffffff80093a4000 X18: 0000000000000000
X17: 0000000000000000 X16: 0000000000000000 X15: 0000000000000000
X14: ffffffffffffffff X13: 0000000000000008 X12: 0101010101010101
X11: 7f7f7f7f7f7f7f7f X10: 6a6a6a6a6a6a6a6a X9: 7f7f7f7f7f7f7f7f
X8: 0000000080808000 X7: ffffff800827409c X6: 0000000080808000
X5: 0000000000000008 X4: 00000000000093d7 X3: 000000000000001a
X2: 0000000000000011 X1: ffffffc070d52480 X0: 0000000000800238
>> #9 [ffffffc001e67be0] f2fs_fill_dentries at ffffff80083584d0
PC: 0000003c LR: 00000000 SP: 00000000 PSTATE: 000000d9
X12: f48a02ff X11: d4678960 X10: d43dfc00 X9: d4678ae4
X8: 00000058 X7: d4678994 X6: d43de800 X5: 000000d9
X4: d43dfc0c X3: d43dfc10 X2: d46799c8 X1: 00000000
X0: 00001068
Below potential deadlock will happen between three threads:
Thread A Thread B Thread C
- f2fs_do_sync_file
- f2fs_write_checkpoint
- down_write(&sbi->node_change) -- 1)
- do_page_fault
- down_write(&mm->mmap_sem) -- 2)
- do_wp_page
- f2fs_vm_page_mkwrite
- getdents64
- f2fs_read_inline_dir
- lock_page -- 3)
- f2fs_sync_node_pages
- lock_page -- 3)
- __do_map_lock
- down_read(&sbi->node_change) -- 1)
- f2fs_fill_dentries
- dir_emit
- compat_filldir64
- do_page_fault
- down_read(&mm->mmap_sem) -- 2)
Since f2fs_readdir is protected by inode.i_rwsem, there should not be
any updates in inode page, we're safe to lookup dents in inode page
without its lock held, so taking off the lock to improve concurrency
of readdir and avoid potential deadlock.
Reported-by: Jiqun Li <jiqun.li@unisoc.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/inline.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/inline.c b/fs/f2fs/inline.c
index 115dc219344b..92703efde36e 100644
--- a/fs/f2fs/inline.c
+++ b/fs/f2fs/inline.c
@@ -661,6 +661,12 @@ int f2fs_read_inline_dir(struct file *file, struct dir_context *ctx,
if (IS_ERR(ipage))
return PTR_ERR(ipage);
+ /*
+ * f2fs_readdir was protected by inode.i_rwsem, it is safe to access
+ * ipage without page's lock held.
+ */
+ unlock_page(ipage);
+
inline_dentry = inline_data_addr(inode, ipage);
make_dentry_ptr_inline(inode, &d, inline_dentry);
@@ -669,7 +675,7 @@ int f2fs_read_inline_dir(struct file *file, struct dir_context *ctx,
if (!err)
ctx->pos = d.max;
- f2fs_put_page(ipage, 1);
+ f2fs_put_page(ipage, 0);
return err < 0 ? err : 0;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 009/187] tracing: kdb: Fix ftdump to not sleep
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (7 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 008/187] f2fs: fix to avoid deadlock in f2fs_read_inline_dir() Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 010/187] net/mlx5: Avoid panic when setting vport rate Greg Kroah-Hartman
` (182 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian Norris, Douglas Anderson,
Steven Rostedt (VMware),
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 31b265b3baaf55f209229888b7ffea523ddab366 ]
As reported back in 2016-11 [1], the "ftdump" kdb command triggers a
BUG for "sleeping function called from invalid context".
kdb's "ftdump" command wants to call ring_buffer_read_prepare() in
atomic context. A very simple solution for this is to add allocation
flags to ring_buffer_read_prepare() so kdb can call it without
triggering the allocation error. This patch does that.
Note that in the original email thread about this, it was suggested
that perhaps the solution for kdb was to either preallocate the buffer
ahead of time or create our own iterator. I'm hoping that this
alternative of adding allocation flags to ring_buffer_read_prepare()
can be considered since it means I don't need to duplicate more of the
core trace code into "trace_kdb.c" (for either creating my own
iterator or re-preparing a ring allocator whose memory was already
allocated).
NOTE: another option for kdb is to actually figure out how to make it
reuse the existing ftrace_dump() function and totally eliminate the
duplication. This sounds very appealing and actually works (the "sr
z" command can be seen to properly dump the ftrace buffer). The
downside here is that ftrace_dump() fully consumes the trace buffer.
Unless that is changed I'd rather not use it because it means "ftdump
| grep xyz" won't be very useful to search the ftrace buffer since it
will throw away the whole trace on the first grep. A future patch to
dump only the last few lines of the buffer will also be hard to
implement.
[1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com
Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.org
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/ring_buffer.h | 2 +-
kernel/trace/ring_buffer.c | 5 +++--
kernel/trace/trace.c | 6 ++++--
kernel/trace/trace_kdb.c | 6 ++++--
4 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 0940fda59872..941bfd9b3c89 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -128,7 +128,7 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts,
unsigned long *lost_events);
struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu);
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu, gfp_t flags);
void ring_buffer_read_prepare_sync(void);
void ring_buffer_read_start(struct ring_buffer_iter *iter);
void ring_buffer_read_finish(struct ring_buffer_iter *iter);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 65bd4616220d..34b4c32b0692 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -4141,6 +4141,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
* ring_buffer_read_prepare - Prepare for a non consuming read of the buffer
* @buffer: The ring buffer to read from
* @cpu: The cpu buffer to iterate over
+ * @flags: gfp flags to use for memory allocation
*
* This performs the initial preparations necessary to iterate
* through the buffer. Memory is allocated, buffer recording
@@ -4158,7 +4159,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
* This overall must be paired with ring_buffer_read_finish.
*/
struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu, gfp_t flags)
{
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_iter *iter;
@@ -4166,7 +4167,7 @@ ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return NULL;
- iter = kmalloc(sizeof(*iter), GFP_KERNEL);
+ iter = kmalloc(sizeof(*iter), flags);
if (!iter)
return NULL;
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 1f96b292df31..c65cea71d1ee 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3903,7 +3903,8 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
if (iter->cpu_file == RING_BUFFER_ALL_CPUS) {
for_each_tracing_cpu(cpu) {
iter->buffer_iter[cpu] =
- ring_buffer_read_prepare(iter->trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter->trace_buffer->buffer,
+ cpu, GFP_KERNEL);
}
ring_buffer_read_prepare_sync();
for_each_tracing_cpu(cpu) {
@@ -3913,7 +3914,8 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
} else {
cpu = iter->cpu_file;
iter->buffer_iter[cpu] =
- ring_buffer_read_prepare(iter->trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter->trace_buffer->buffer,
+ cpu, GFP_KERNEL);
ring_buffer_read_prepare_sync();
ring_buffer_read_start(iter->buffer_iter[cpu]);
tracing_iter_reset(iter, cpu);
diff --git a/kernel/trace/trace_kdb.c b/kernel/trace/trace_kdb.c
index d953c163a079..810d78a8d14c 100644
--- a/kernel/trace/trace_kdb.c
+++ b/kernel/trace/trace_kdb.c
@@ -51,14 +51,16 @@ static void ftrace_dump_buf(int skip_lines, long cpu_file)
if (cpu_file == RING_BUFFER_ALL_CPUS) {
for_each_tracing_cpu(cpu) {
iter.buffer_iter[cpu] =
- ring_buffer_read_prepare(iter.trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter.trace_buffer->buffer,
+ cpu, GFP_ATOMIC);
ring_buffer_read_start(iter.buffer_iter[cpu]);
tracing_iter_reset(&iter, cpu);
}
} else {
iter.cpu_file = cpu_file;
iter.buffer_iter[cpu_file] =
- ring_buffer_read_prepare(iter.trace_buffer->buffer, cpu_file);
+ ring_buffer_read_prepare(iter.trace_buffer->buffer,
+ cpu_file, GFP_ATOMIC);
ring_buffer_read_start(iter.buffer_iter[cpu_file]);
tracing_iter_reset(&iter, cpu_file);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 010/187] net/mlx5: Avoid panic when setting vport rate
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (8 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 009/187] tracing: kdb: Fix ftdump to not sleep Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 011/187] net/mlx5: Avoid panic when setting vport mac, getting vport config Greg Kroah-Hartman
` (181 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mohamad Haj Yahia, Tonghao Zhang,
Roi Dayan, Saeed Mahameed, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 24319258660a84dd77f4be026a55b10a12524919 ]
If we try to set VFs rate on a VF (not PF) net device, the kernel
will be crash. The commands are show as below:
$ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs
$ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1
If not applied the first patch ("net/mlx5: Avoid panic when setting
vport mac, getting vport config"), the command:
$ ip link set $MLX_VF0 vf 0 rate 100
can also crash the kernel.
[ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core]
[ 1650.007092] do_setlink+0x982/0xd20
[ 1650.007129] __rtnl_newlink+0x528/0x7d0
[ 1650.007374] rtnl_newlink+0x43/0x60
[ 1650.007407] rtnetlink_rcv_msg+0x2a2/0x320
[ 1650.007484] netlink_rcv_skb+0xcb/0x100
[ 1650.007519] netlink_unicast+0x17f/0x230
[ 1650.007554] netlink_sendmsg+0x2d2/0x3d0
[ 1650.007592] sock_sendmsg+0x36/0x50
[ 1650.007625] ___sys_sendmsg+0x280/0x2a0
[ 1650.007963] __sys_sendmsg+0x58/0xa0
[ 1650.007998] do_syscall_64+0x5b/0x180
[ 1650.009438] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate")
Cc: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index d6706475a3ba..886a4a77c47f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -2044,19 +2044,24 @@ static int normalize_vports_min_rate(struct mlx5_eswitch *esw, u32 divider)
int mlx5_eswitch_set_vport_rate(struct mlx5_eswitch *esw, int vport,
u32 max_rate, u32 min_rate)
{
- u32 fw_max_bw_share = MLX5_CAP_QOS(esw->dev, max_tsar_bw_share);
- bool min_rate_supported = MLX5_CAP_QOS(esw->dev, esw_bw_share) &&
- fw_max_bw_share >= MLX5_MIN_BW_SHARE;
- bool max_rate_supported = MLX5_CAP_QOS(esw->dev, esw_rate_limit);
struct mlx5_vport *evport;
+ u32 fw_max_bw_share;
u32 previous_min_rate;
u32 divider;
+ bool min_rate_supported;
+ bool max_rate_supported;
int err = 0;
if (!ESW_ALLOWED(esw))
return -EPERM;
if (!LEGAL_VPORT(esw, vport))
return -EINVAL;
+
+ fw_max_bw_share = MLX5_CAP_QOS(esw->dev, max_tsar_bw_share);
+ min_rate_supported = MLX5_CAP_QOS(esw->dev, esw_bw_share) &&
+ fw_max_bw_share >= MLX5_MIN_BW_SHARE;
+ max_rate_supported = MLX5_CAP_QOS(esw->dev, esw_rate_limit);
+
if ((min_rate && !min_rate_supported) || (max_rate && !max_rate_supported))
return -EOPNOTSUPP;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 011/187] net/mlx5: Avoid panic when setting vport mac, getting vport config
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (9 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 010/187] net/mlx5: Avoid panic when setting vport rate Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 012/187] gpio: gpio-omap: fix level interrupt idling Greg Kroah-Hartman
` (180 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eli Cohen, Tonghao Zhang, Roi Dayan,
Saeed Mahameed, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6e77c413e8e73d0f36b5358b601389d75ec4451c ]
If we try to set VFs mac address on a VF (not PF) net device,
the kernel will be crash. The commands are show as below:
$ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs
$ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00
[exception RIP: mlx5_eswitch_set_vport_mac+41]
[ffffb8b7079e3688] do_setlink at ffffffff8f67f85b
[ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778
[ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63
[ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812
[ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab
[ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f
[ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412
[ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6
[ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860
[ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38
[ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b
[ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c
and
[exception RIP: mlx5_eswitch_get_vport_config+12]
[ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core]
[ffffa70607e57688] do_setlink at ffffffffbc67fa59
[ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778
[ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63
[ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812
[ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab
[ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f
[ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412
[ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6
[ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860
[ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38
[ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b
[ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c
Fixes: a8d70a054a718 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager")
Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 886a4a77c47f..26c9f9421901 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1797,7 +1797,7 @@ int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw,
u64 node_guid;
int err = 0;
- if (!MLX5_CAP_GEN(esw->dev, vport_group_manager))
+ if (!esw || !MLX5_CAP_GEN(esw->dev, vport_group_manager))
return -EPERM;
if (!LEGAL_VPORT(esw, vport) || is_multicast_ether_addr(mac))
return -EINVAL;
@@ -1871,7 +1871,7 @@ int mlx5_eswitch_get_vport_config(struct mlx5_eswitch *esw,
{
struct mlx5_vport *evport;
- if (!MLX5_CAP_GEN(esw->dev, vport_group_manager))
+ if (!esw || !MLX5_CAP_GEN(esw->dev, vport_group_manager))
return -EPERM;
if (!LEGAL_VPORT(esw, vport))
return -EINVAL;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 012/187] gpio: gpio-omap: fix level interrupt idling
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (10 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 011/187] net/mlx5: Avoid panic when setting vport mac, getting vport config Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 013/187] include/linux/relay.h: fix percpu annotation in struct rchan Greg Kroah-Hartman
` (179 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aaro Koskinen, Keerthy,
Peter Ujfalusi, Russell King, Tony Lindgren, Grygorii Strashko,
Linus Walleij, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d01849f7deba81f4959fd9e51bf20dbf46987d1c ]
Tony notes that the GPIO module does not idle when level interrupts are
in use, as the wakeup appears to get stuck.
After extensive investigation, it appears that the wakeup will only be
cleared if the interrupt status register is cleared while the interrupt
is enabled. However, we are currently clearing it with the interrupt
disabled for level-based interrupts.
It is acknowledged that this observed behaviour conflicts with a
statement in the TRM:
CAUTION
After servicing the interrupt, the status bit in the interrupt status
register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be
reset and the interrupt line released (by setting the corresponding
bit of the interrupt status register to 1) before enabling an
interrupt for the GPIO channel in the interrupt-enable register
(GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent
the occurrence of unexpected interrupts when enabling an interrupt
for the GPIO channel.
However, this does not appear to be a practical problem.
Further, as reported by Grygorii Strashko <grygorii.strashko@ti.com>,
the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP:
Fix the sequence to clear the IRQ status" saying:
if the status is cleared after disabling the IRQ then sWAKEUP will not
be cleared and gates the module transition
When we unmask the level interrupt after the interrupt has been handled,
enable the interrupt and only then clear the interrupt. If the interrupt
is still pending, the hardware will re-assert the interrupt status.
Should the caution note in the TRM prove to be a problem, we could
use a clear-enable-clear sequence instead.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[tony@atomide.com: updated comments based on an earlier TI patch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-omap.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e81008678a38..6c1acf642c8e 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -888,14 +888,16 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
if (trigger)
omap_set_gpio_triggering(bank, offset, trigger);
- /* For level-triggered GPIOs, the clearing must be done after
- * the HW source is cleared, thus after the handler has run */
- if (bank->level_mask & BIT(offset)) {
- omap_set_gpio_irqenable(bank, offset, 0);
+ omap_set_gpio_irqenable(bank, offset, 1);
+
+ /*
+ * For level-triggered GPIOs, clearing must be done after the source
+ * is cleared, thus after the handler has run. OMAP4 needs this done
+ * after enabing the interrupt to clear the wakeup status.
+ */
+ if (bank->level_mask & BIT(offset))
omap_clear_gpio_irqstatus(bank, offset);
- }
- omap_set_gpio_irqenable(bank, offset, 1);
raw_spin_unlock_irqrestore(&bank->lock, flags);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 013/187] include/linux/relay.h: fix percpu annotation in struct rchan
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (11 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 012/187] gpio: gpio-omap: fix level interrupt idling Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 014/187] sysctl: handle overflow for file-max Greg Kroah-Hartman
` (178 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Luc Van Oostenryck, Jens Axboe,
Thomas Gleixner, Andrew Morton, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 62461ac2e5b6520b6d65fc6d7d7b4b8df4b848d8 ]
The percpu member of this structure is declared as:
struct ... ** __percpu member;
So its type is:
__percpu pointer to pointer to struct ...
But looking at how it's used, its type should be:
pointer to __percpu pointer to struct ...
and it should thus be declared as:
struct ... * __percpu *member;
So fix the placement of '__percpu' in the definition of this
structures.
This silents a few Sparse's warnings like:
warning: incorrect type in initializer (different address spaces)
expected void const [noderef] <asn:3> *__vpp_verify
got struct sched_domain **
Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com
Fixes: 017c59c042d01 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/relay.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/relay.h b/include/linux/relay.h
index e1bdf01a86e2..c759f96e39c1 100644
--- a/include/linux/relay.h
+++ b/include/linux/relay.h
@@ -66,7 +66,7 @@ struct rchan
struct kref kref; /* channel refcount */
void *private_data; /* for user-defined data */
size_t last_toobig; /* tried to log event > subbuf size */
- struct rchan_buf ** __percpu buf; /* per-cpu channel buffers */
+ struct rchan_buf * __percpu *buf; /* per-cpu channel buffers */
int is_global; /* One global buffer ? */
struct list_head list; /* for channel list */
struct dentry *parent; /* parent dentry passed to open */
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 014/187] sysctl: handle overflow for file-max
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (12 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 013/187] include/linux/relay.h: fix percpu annotation in struct rchan Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 015/187] net: stmmac: Avoid sometimes uninitialized Clang warnings Greg Kroah-Hartman
` (177 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian Brauner, Kees Cook,
Alexey Dobriyan, Al Viro, Dominik Brodowski, Eric W. Biederman,
Joe Lawrence, Luis Chamberlain, Waiman Long, Andrew Morton,
Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 32a5ad9c22852e6bd9e74bdec5934ef9d1480bc5 ]
Currently, when writing
echo 18446744073709551616 > /proc/sys/fs/file-max
/proc/sys/fs/file-max will overflow and be set to 0. That quickly
crashes the system.
This commit sets the max and min value for file-max. The max value is
set to long int. Any higher value cannot currently be used as the
percpu counters are long ints and not unsigned integers.
Note that the file-max value is ultimately parsed via
__do_proc_doulongvec_minmax(). This function does not report error when
min or max are exceeded. Which means if a value largen that long int is
written userspace will not receive an error instead the old value will be
kept. There is an argument to be made that this should be changed and
__do_proc_doulongvec_minmax() should return an error when a dedicated min
or max value are exceeded. However this has the potential to break
userspace so let's defer this to an RFC patch.
Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Waiman Long <longman@redhat.com>
[christian@brauner.io: v4]
Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.io
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sysctl.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 3b86acd5de4e..9e22660153ff 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -126,6 +126,7 @@ static int __maybe_unused one = 1;
static int __maybe_unused two = 2;
static int __maybe_unused four = 4;
static unsigned long one_ul = 1;
+static unsigned long long_max = LONG_MAX;
static int one_hundred = 100;
static int one_thousand = 1000;
#ifdef CONFIG_PRINTK
@@ -1695,6 +1696,8 @@ static struct ctl_table fs_table[] = {
.maxlen = sizeof(files_stat.max_files),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
+ .extra1 = &zero,
+ .extra2 = &long_max,
},
{
.procname = "nr_open",
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 015/187] net: stmmac: Avoid sometimes uninitialized Clang warnings
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (13 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 014/187] sysctl: handle overflow for file-max Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 016/187] enic: fix build warning without CONFIG_CPUMASK_OFFSTACK Greg Kroah-Hartman
` (176 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nick Desaulniers, Nathan Chancellor,
David S. Miller, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit df103170854e87124ee7bdd2bca64b178e653f97 ]
When building with -Wsometimes-uninitialized, Clang warns:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized]
Clang is concerned with the use of stmmac_do_void_callback (which
stmmac_get_timestamp and stmmac_config_sub_second_increment wrap),
as it may fail to initialize these values if the if condition was ever
false (meaning the callbacks don't exist). It's not wrong because the
callbacks (get_timestamp and config_sub_second_increment respectively)
are the ones that initialize the variables. While it's unlikely that the
callbacks are ever going to disappear and make that condition false, we
can easily avoid this warning by zero initialize the variables.
Link: https://github.com/ClangBuiltLinux/linux/issues/384
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 43ab9e905bed..886176be818e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -474,7 +474,7 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv,
struct dma_desc *p, struct sk_buff *skb)
{
struct skb_shared_hwtstamps shhwtstamp;
- u64 ns;
+ u64 ns = 0;
if (!priv->hwts_tx_en)
return;
@@ -513,7 +513,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
{
struct skb_shared_hwtstamps *shhwtstamp = NULL;
struct dma_desc *desc = p;
- u64 ns;
+ u64 ns = 0;
if (!priv->hwts_rx_en)
return;
@@ -558,8 +558,8 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
u32 snap_type_sel = 0;
u32 ts_master_en = 0;
u32 ts_event_en = 0;
+ u32 sec_inc = 0;
u32 value = 0;
- u32 sec_inc;
bool xmac;
xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 016/187] enic: fix build warning without CONFIG_CPUMASK_OFFSTACK
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (14 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 015/187] net: stmmac: Avoid sometimes uninitialized Clang warnings Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 017/187] libbpf: force fixdep compilation at the start of the build Greg Kroah-Hartman
` (175 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Nathan Chancellor,
David S. Miller, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 43d281662fdb46750d49417559b71069f435298d ]
The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to
dynamically allocate a struct member, but this is normally intended for
local variables.
Building with clang, I get a warning for a few locations that check the
address of the cpumask_var_t:
drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
As far as I can tell, the code is still correct, as the truth value of
the pointer is what we need in this configuration. To get rid of
the warning, use cpumask_available() instead of checking the
pointer directly.
Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 9a7f70db20c7..733d9172425b 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -119,7 +119,7 @@ static void enic_init_affinity_hint(struct enic *enic)
for (i = 0; i < enic->intr_count; i++) {
if (enic_is_err_intr(enic, i) || enic_is_notify_intr(enic, i) ||
- (enic->msix[i].affinity_mask &&
+ (cpumask_available(enic->msix[i].affinity_mask) &&
!cpumask_empty(enic->msix[i].affinity_mask)))
continue;
if (zalloc_cpumask_var(&enic->msix[i].affinity_mask,
@@ -148,7 +148,7 @@ static void enic_set_affinity_hint(struct enic *enic)
for (i = 0; i < enic->intr_count; i++) {
if (enic_is_err_intr(enic, i) ||
enic_is_notify_intr(enic, i) ||
- !enic->msix[i].affinity_mask ||
+ !cpumask_available(enic->msix[i].affinity_mask) ||
cpumask_empty(enic->msix[i].affinity_mask))
continue;
err = irq_set_affinity_hint(enic->msix_entry[i].vector,
@@ -161,7 +161,7 @@ static void enic_set_affinity_hint(struct enic *enic)
for (i = 0; i < enic->wq_count; i++) {
int wq_intr = enic_msix_wq_intr(enic, i);
- if (enic->msix[wq_intr].affinity_mask &&
+ if (cpumask_available(enic->msix[wq_intr].affinity_mask) &&
!cpumask_empty(enic->msix[wq_intr].affinity_mask))
netif_set_xps_queue(enic->netdev,
enic->msix[wq_intr].affinity_mask,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 017/187] libbpf: force fixdep compilation at the start of the build
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (15 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 016/187] enic: fix build warning without CONFIG_CPUMASK_OFFSTACK Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 018/187] scsi: hisi_sas: Set PHY linkrate when disconnected Greg Kroah-Hartman
` (174 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Stanislav Fomichev,
Yonghong Song, Daniel Borkmann, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8e2688876c7f7073d925e1f150e86b8ed3338f52 ]
libbpf targets don't explicitly depend on fixdep target, so when
we do 'make -j$(nproc)', there is a high probability, that some
objects will be built before fixdep binary is available.
Fix this by running sub-make; this makes sure that fixdep dependency
is properly accounted for.
For the same issue in perf, see commit abb26210a395 ("perf tools: Force
fixdep compilation at the start of the build").
Before:
$ rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld -C tools/lib/bpf/
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
HOSTCC /tmp/bld/fixdep.o
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/btf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
HOSTLD /tmp/bld/fixdep-in.o
LINK /tmp/bld/fixdep
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so
LINK /tmp/bld/test_libbpf
$ head /tmp/bld/.libbpf.o.cmd
# cannot find fixdep (/usr/local/google/home/sdf/src/linux/xxx//fixdep)
# using basic dep data
/tmp/bld/libbpf.o: libbpf.c /usr/include/stdc-predef.h \
/usr/include/stdlib.h /usr/include/features.h \
/usr/include/x86_64-linux-gnu/sys/cdefs.h \
/usr/include/x86_64-linux-gnu/bits/wordsize.h \
/usr/include/x86_64-linux-gnu/gnu/stubs.h \
/usr/include/x86_64-linux-gnu/gnu/stubs-64.h \
/usr/lib/gcc/x86_64-linux-gnu/7/include/stddef.h \
After:
$ rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld -C tools/lib/bpf/
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
HOSTCC /tmp/bld/fixdep.o
HOSTLD /tmp/bld/fixdep-in.o
LINK /tmp/bld/fixdep
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/btf.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so
LINK /tmp/bld/test_libbpf
$ head /tmp/bld/.libbpf.o.cmd
cmd_/tmp/bld/libbpf.o := gcc -Wp,-MD,/tmp/bld/.libbpf.o.d -Wp,-MT,/tmp/bld/libbpf.o -g -Wall -DHAVE_LIBELF_MMAP_SUPPORT -DCOMPAT_NEED_REALLOCARRAY -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wshadow -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -Wstrict-aliasing=3 -Werror -Wall -fPIC -I. -I/usr/local/google/home/sdf/src/linux/tools/include -I/usr/local/google/home/sdf/src/linux/tools/arch/x86/include/uapi -I/usr/local/google/home/sdf/src/linux/tools/include/uapi -fvisibility=hidden -D"BUILD_STR(s)=$(pound)s" -c -o /tmp/bld/libbpf.o libbpf.c
source_/tmp/bld/libbpf.o := libbpf.c
deps_/tmp/bld/libbpf.o := \
/usr/include/stdc-predef.h \
/usr/include/stdlib.h \
/usr/include/features.h \
/usr/include/x86_64-linux-gnu/sys/cdefs.h \
/usr/include/x86_64-linux-gnu/bits/wordsize.h \
Fixes: 7c422f557266 ("tools build: Build fixdep helper from perf and basic libs")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/bpf/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index d49902e818b5..3624557550a1 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -149,7 +149,8 @@ CMD_TARGETS = $(LIB_FILE)
TARGETS = $(CMD_TARGETS)
-all: fixdep all_cmd
+all: fixdep
+ $(Q)$(MAKE) all_cmd
all_cmd: $(CMD_TARGETS)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 018/187] scsi: hisi_sas: Set PHY linkrate when disconnected
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (16 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 017/187] libbpf: force fixdep compilation at the start of the build Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 019/187] scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO Greg Kroah-Hartman
` (173 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, John Garry, Martin K. Petersen, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit efdcad62e7b8a02fcccc5ccca57806dce1482ac8 ]
When the PHY comes down, we currently do not set the negotiated linkrate:
root@(none)$ pwd
/sys/class/sas_phy/phy-0:0
root@(none)$ more enable
1
root@(none)$ more negotiated_linkrate
12.0 Gbit
root@(none)$ echo 0 > enable
root@(none)$ more negotiated_linkrate
12.0 Gbit
root@(none)$
This patch fixes the driver code to set it properly when the PHY comes
down.
If the PHY had been enabled, then set unknown; otherwise, flag as disabled.
The logical place to set the negotiated linkrate for this scenario is PHY
down routine, which is called from the PHY down ISR.
However, it is not possible to know if the PHY comes down due to PHY
disable or loss of link, as sas_phy.enabled member is not set until after
the transport disable routine is complete, which races with the PHY down
ISR.
As an imperfect solution, use sas_phy_data.enable as the flag to know if
the PHY is down due to disable. It's imperfect, as sas_phy_data is internal
to libsas.
I can't see another way without adding a new field to hisi_sas_phy and
managing it, or changing SCSI SAS transport.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index a4e2e6aa9a6b..c25f3a9b0b9f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -10,6 +10,7 @@
*/
#include "hisi_sas.h"
+#include "../libsas/sas_internal.h"
#define DRV_NAME "hisi_sas"
#define DEV_IS_GONE(dev) \
@@ -1879,9 +1880,18 @@ static int hisi_sas_write_gpio(struct sas_ha_struct *sha, u8 reg_type,
static void hisi_sas_phy_disconnected(struct hisi_sas_phy *phy)
{
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_phy *sphy = sas_phy->phy;
+ struct sas_phy_data *d = sphy->hostdata;
+
phy->phy_attached = 0;
phy->phy_type = 0;
phy->port = NULL;
+
+ if (d->enable)
+ sphy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+ else
+ sphy->negotiated_linkrate = SAS_PHY_DISABLED;
}
void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 019/187] scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (17 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 018/187] scsi: hisi_sas: Set PHY linkrate when disconnected Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 020/187] iio: adc: fix warning in Qualcomm PM8xxx HK/XOADC driver Greg Kroah-Hartman
` (172 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xiang Chen, John Garry,
Martin K. Petersen, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4790595723d4b833b18c994973d39f9efb842887 ]
For internal IO and SMP IO, there is a time-out timer for them. In the
timer handler, it checks whether IO is done according to the flag
task->task_state_lock.
There is an issue which may cause system suspended: internal IO or SMP IO
is sent, but at that time because of hardware exception (such as inject
2Bit ECC error), so IO is not completed and also not timeout. But, at that
time, the SAS controller reset occurs to recover system. It will release
the resource and set the status of IO to be SAS_TASK_STATE_DONE, so when IO
timeout, it will never complete the completion of IO and wait for ever.
[ 729.123632] Call trace:
[ 729.126791] [<ffff00000808655c>] __switch_to+0x94/0xa8
[ 729.133106] [<ffff000008d96e98>] __schedule+0x1e8/0x7fc
[ 729.138975] [<ffff000008d974e0>] schedule+0x34/0x8c
[ 729.144401] [<ffff000008d9b000>] schedule_timeout+0x1d8/0x3cc
[ 729.150690] [<ffff000008d98218>] wait_for_common+0xdc/0x1a0
[ 729.157101] [<ffff000008d98304>] wait_for_completion+0x28/0x34
[ 729.165973] [<ffff000000dcefb4>] hisi_sas_internal_task_abort+0x2a0/0x424 [hisi_sas_test_main]
[ 729.176447] [<ffff000000dd18f4>] hisi_sas_abort_task+0x244/0x2d8 [hisi_sas_test_main]
[ 729.185258] [<ffff000008971714>] sas_eh_handle_sas_errors+0x1c8/0x7b8
[ 729.192391] [<ffff000008972774>] sas_scsi_recover_host+0x130/0x398
[ 729.199237] [<ffff00000894d8a8>] scsi_error_handler+0x148/0x5c0
[ 729.206009] [<ffff0000080f4118>] kthread+0x10c/0x138
[ 729.211563] [<ffff0000080855dc>] ret_from_fork+0x10/0x18
To solve the issue, callback function task_done of those IOs need to be
called when on SAS controller reset.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index c25f3a9b0b9f..fd9d82c9033d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -810,7 +810,8 @@ static void hisi_sas_do_release_task(struct hisi_hba *hisi_hba, struct sas_task
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags &=
~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
- task->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (!slot->is_internal && task->task_proto != SAS_PROTOCOL_SMP)
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
spin_unlock_irqrestore(&task->task_state_lock, flags);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 020/187] iio: adc: fix warning in Qualcomm PM8xxx HK/XOADC driver
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (18 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 019/187] scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 021/187] x86/hyperv: Fix kernel panic when kexec on HyperV Greg Kroah-Hartman
` (171 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joe Perches, Andy Gross, David Brown,
Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen,
Peter Meerwald-Stadler, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e0f0ae838a25464179d37f355d763f9ec139fc15 ]
The pm8xxx_get_channel() implementation is unclear, and causes gcc to
suddenly generate odd warnings. The trigger for the warning (at least
for me) was the entirely unrelated commit 79a4e91d1bb2 ("device.h: Add
__cold to dev_<level> logging functions"), which apparently changes gcc
code generation in the caller function enough to cause this:
drivers/iio/adc/qcom-pm8xxx-xoadc.c: In function ‘pm8xxx_xoadc_probe’:
drivers/iio/adc/qcom-pm8xxx-xoadc.c:633:8: warning: ‘ch’ may be used uninitialized in this function [-Wmaybe-uninitialized]
ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
&read_nomux_rsv4, true);
~~~~~~~~~~~~~~~~~~~~~~~
drivers/iio/adc/qcom-pm8xxx-xoadc.c:426:27: note: ‘ch’ was declared here
struct pm8xxx_chan_info *ch;
^~
because gcc for some reason then isn't able to see that the termination
condition for the "for( )" loop in that function is also the condition
for returning NULL.
So it's not _actually_ uninitialized, but the function is admittedly
just unnecessarily oddly written.
Simplify and clarify the function, making gcc also see that it always
returns a valid initialized value.
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/adc/qcom-pm8xxx-xoadc.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index b093ecddf1a8..54db848f0bcd 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -423,18 +423,14 @@ static irqreturn_t pm8xxx_eoc_irq(int irq, void *d)
static struct pm8xxx_chan_info *
pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan)
{
- struct pm8xxx_chan_info *ch;
int i;
for (i = 0; i < adc->nchans; i++) {
- ch = &adc->chans[i];
+ struct pm8xxx_chan_info *ch = &adc->chans[i];
if (ch->hwchan->amux_channel == chan)
- break;
+ return ch;
}
- if (i == adc->nchans)
- return NULL;
-
- return ch;
+ return NULL;
}
static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 021/187] x86/hyperv: Fix kernel panic when kexec on HyperV
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (19 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 020/187] iio: adc: fix warning in Qualcomm PM8xxx HK/XOADC driver Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:45 ` [PATCH 4.19 022/187] perf c2c: Fix c2c report for empty numa node Greg Kroah-Hartman
` (170 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kairui Song, Thomas Gleixner,
K. Y. Srinivasan, Haiyang Zhang, Stephen Hemminger, Sasha Levin,
Borislav Petkov, H. Peter Anvin, Vitaly Kuznetsov, Dave Young,
devel
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 179fb36abb097976997f50733d5b122a29158cba ]
After commit 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments"),
kexec fails with a kernel panic:
kexec_core: Starting new kernel
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v3.0 03/02/2018
RIP: 0010:0xffffc9000001d000
Call Trace:
? __send_ipi_mask+0x1c6/0x2d0
? hv_send_ipi_mask_allbutself+0x6d/0xb0
? mp_save_irq+0x70/0x70
? __ioapic_read_entry+0x32/0x50
? ioapic_read_entry+0x39/0x50
? clear_IO_APIC_pin+0xb8/0x110
? native_stop_other_cpus+0x6e/0x170
? native_machine_shutdown+0x22/0x40
? kernel_kexec+0x136/0x156
That happens if hypercall based IPIs are used because the hypercall page is
reset very early upon kexec reboot, but kexec sends IPIs to stop CPUs,
which invokes the hypercall and dereferences the unusable page.
To fix his, reset hv_hypercall_pg to NULL before the page is reset to avoid
any misuse, IPI sending will fall back to the non hypercall based
method. This only happens on kexec / kdump so just setting the pointer to
NULL is good enough.
Fixes: 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments")
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: devel@linuxdriverproject.org
Link: https://lkml.kernel.org/r/20190306111827.14131-1-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/hyperv/hv_init.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 20c876c7c5bf..87abd5145cc9 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -387,6 +387,13 @@ void hyperv_cleanup(void)
/* Reset our OS id */
wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
+ /*
+ * Reset hypercall page reference before reset the page,
+ * let hypercall operations fail safely rather than
+ * panic the kernel for using invalid hypercall page
+ */
+ hv_hypercall_pg = NULL;
+
/* Reset the hypercall page */
hypercall_msr.as_uint64 = 0;
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 022/187] perf c2c: Fix c2c report for empty numa node
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (20 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 021/187] x86/hyperv: Fix kernel panic when kexec on HyperV Greg Kroah-Hartman
@ 2019-04-04 8:45 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 023/187] mm/sparse: fix a bad comparison Greg Kroah-Hartman
` (169 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nageswara R Sastry, Jiri Olsa,
Ravi Bangoria, Alexander Shishkin, Andi Kleen, Jonas Rabenstein,
Namhyung Kim, Peter Zijlstra, Arnaldo Carvalho de Melo,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e34c940245437f36d2c492edd1f8237eff391064 ]
Ravi Bangoria reported that we fail with an empty NUMA node with the
following message:
$ lscpu
NUMA node0 CPU(s):
NUMA node1 CPU(s): 0-4
$ sudo ./perf c2c report
node/cpu topology bugFailed setup nodes
Fix this by detecting the empty node and keeping its CPU set empty.
Reported-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190305152536.21035-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-c2c.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c
index f3aa9d02a5ab..763c2edf52e7 100644
--- a/tools/perf/builtin-c2c.c
+++ b/tools/perf/builtin-c2c.c
@@ -2055,6 +2055,12 @@ static int setup_nodes(struct perf_session *session)
if (!set)
return -ENOMEM;
+ nodes[node] = set;
+
+ /* empty node, skip */
+ if (cpu_map__empty(map))
+ continue;
+
for (cpu = 0; cpu < map->nr; cpu++) {
set_bit(map->map[cpu], set);
@@ -2063,8 +2069,6 @@ static int setup_nodes(struct perf_session *session)
cpu2node[map->map[cpu]] = node;
}
-
- nodes[node] = set;
}
setup_nodes_header();
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 023/187] mm/sparse: fix a bad comparison
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (21 preceding siblings ...)
2019-04-04 8:45 ` [PATCH 4.19 022/187] perf c2c: Fix c2c report for empty numa node Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 024/187] mm/cma.c: cma_declare_contiguous: correct err handling Greg Kroah-Hartman
` (168 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Andrew Morton, Dave Hansen,
Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d778015ac95bc036af73342c878ab19250e01fe1 ]
next_present_section_nr() could only return an unsigned number -1, so
just check it specifically where compilers will convert -1 to unsigned
if needed.
mm/sparse.c: In function 'sparse_init_nid':
mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
((section_nr >= 0) && \
^~
mm/sparse.c:478:2: note: in expansion of macro
'for_each_present_section_nr'
for_each_present_section_nr(pnum_begin, pnum) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~
mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
((section_nr >= 0) && \
^~
mm/sparse.c:497:2: note: in expansion of macro
'for_each_present_section_nr'
for_each_present_section_nr(pnum_begin, pnum) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~
mm/sparse.c: In function 'sparse_init':
mm/sparse.c:200:20: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
((section_nr >= 0) && \
^~
mm/sparse.c:520:2: note: in expansion of macro
'for_each_present_section_nr'
for_each_present_section_nr(pnum_begin + 1, pnum_end) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Link: http://lkml.kernel.org/r/20190228181839.86504-1-cai@lca.pw
Fixes: c4e1be9ec113 ("mm, sparsemem: break out of loops early")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/sparse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/sparse.c b/mm/sparse.c
index 10b07eea9a6e..45950a074bdb 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -196,7 +196,7 @@ static inline int next_present_section_nr(int section_nr)
}
#define for_each_present_section_nr(start, section_nr) \
for (section_nr = next_present_section_nr(start-1); \
- ((section_nr >= 0) && \
+ ((section_nr != -1) && \
(section_nr <= __highest_present_section_nr)); \
section_nr = next_present_section_nr(section_nr))
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 024/187] mm/cma.c: cma_declare_contiguous: correct err handling
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (22 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 023/187] mm/sparse: fix a bad comparison Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 025/187] mm/page_ext.c: fix an imbalance with kmemleak Greg Kroah-Hartman
` (167 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peng Fan, Catalin Marinas,
Mike Rapoport, Laura Abbott, Joonsoo Kim, Michal Hocko,
Vlastimil Babka, Marek Szyprowski, Andrey Konovalov,
Andrew Morton, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0d3bd18a5efd66097ef58622b898d3139790aa9d ]
In case cma_init_reserved_mem failed, need to free the memblock
allocated by memblock_reserve or memblock_alloc_range.
Quote Catalin's comments:
https://lkml.org/lkml/2019/2/26/482
Kmemleak is supposed to work with the memblock_{alloc,free} pair and it
ignores the memblock_reserve() as a memblock_alloc() implementation
detail. It is, however, tolerant to memblock_free() being called on
a sub-range or just a different range from a previous memblock_alloc().
So the original patch looks fine to me. FWIW:
Link: http://lkml.kernel.org/r/20190227144631.16708-1-peng.fan@nxp.com
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/cma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/mm/cma.c b/mm/cma.c
index 4cb76121a3ab..bfe9f5397165 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -353,12 +353,14 @@ int __init cma_declare_contiguous(phys_addr_t base,
ret = cma_init_reserved_mem(base, size, order_per_bit, name, res_cma);
if (ret)
- goto err;
+ goto free_mem;
pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
&base);
return 0;
+free_mem:
+ memblock_free(base, size);
err:
pr_err("Failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
return ret;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 025/187] mm/page_ext.c: fix an imbalance with kmemleak
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (23 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 024/187] mm/cma.c: cma_declare_contiguous: correct err handling Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 026/187] mm, swap: bounds check swap_info array accesses to avoid NULL derefs Greg Kroah-Hartman
` (166 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Catalin Marinas,
Andrew Morton, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0c81585499601acd1d0e1cbf424cabfaee60628c ]
After offlining a memory block, kmemleak scan will trigger a crash, as
it encounters a page ext address that has already been freed during
memory offlining. At the beginning in alloc_page_ext(), it calls
kmemleak_alloc(), but it does not call kmemleak_free() in
free_page_ext().
BUG: unable to handle kernel paging request at ffff888453d00000
PGD 128a01067 P4D 128a01067 PUD 128a04067 PMD 47e09e067 PTE 800ffffbac2ff060
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 1 PID: 1594 Comm: bash Not tainted 5.0.0-rc8+ #15
Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017
RIP: 0010:scan_block+0xb5/0x290
Code: 85 6e 01 00 00 48 b8 00 00 30 f5 81 88 ff ff 48 39 c3 0f 84 5b 01 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 0f 85 87 01 00 00 <4c> 8b 3b e8 f3 0c fa ff 4c 39 3d 0c 6b 4c 01 0f 87 08 01 00 00 4c
RSP: 0018:ffff8881ec57f8e0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffff888453d00000 RCX: ffffffffa61e5a54
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff888453d00000
RBP: ffff8881ec57f920 R08: fffffbfff4ed588d R09: fffffbfff4ed588c
R10: fffffbfff4ed588c R11: ffffffffa76ac463 R12: dffffc0000000000
R13: ffff888453d00ff9 R14: ffff8881f80cef48 R15: ffff8881f80cef48
FS: 00007f6c0e3f8740(0000) GS:ffff8881f7680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888453d00000 CR3: 00000001c4244003 CR4: 00000000001606a0
Call Trace:
scan_gray_list+0x269/0x430
kmemleak_scan+0x5a8/0x10f0
kmemleak_write+0x541/0x6ca
full_proxy_write+0xf8/0x190
__vfs_write+0xeb/0x980
vfs_write+0x15a/0x4f0
ksys_write+0xd2/0x1b0
__x64_sys_write+0x73/0xb0
do_syscall_64+0xeb/0xaaa
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f6c0dad73b8
Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 63 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
RSP: 002b:00007ffd5b863cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f6c0dad73b8
RDX: 0000000000000005 RSI: 000055a9216e1710 RDI: 0000000000000001
RBP: 000055a9216e1710 R08: 000000000000000a R09: 00007ffd5b863840
R10: 000000000000000a R11: 0000000000000246 R12: 00007f6c0dda9780
R13: 0000000000000005 R14: 00007f6c0dda4740 R15: 0000000000000005
Modules linked in: nls_iso8859_1 nls_cp437 vfat fat kvm_intel kvm irqbypass efivars ip_tables x_tables xfs sd_mod ahci libahci igb i2c_algo_bit libata i2c_core dm_mirror dm_region_hash dm_log dm_mod efivarfs
CR2: ffff888453d00000
---[ end trace ccf646c7456717c5 ]---
Kernel panic - not syncing: Fatal exception
Shutting down cpus with NMI
Kernel Offset: 0x24c00000 from 0xffffffff81000000 (relocation range:
0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
Link: http://lkml.kernel.org/r/20190227173147.75650-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/page_ext.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/mm/page_ext.c b/mm/page_ext.c
index 4961f13b6ec1..aad120123688 100644
--- a/mm/page_ext.c
+++ b/mm/page_ext.c
@@ -273,6 +273,7 @@ static void free_page_ext(void *addr)
table_size = get_entry_size() * PAGES_PER_SECTION;
BUG_ON(PageReserved(page));
+ kmemleak_free(addr);
free_pages_exact(addr, table_size);
}
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 026/187] mm, swap: bounds check swap_info array accesses to avoid NULL derefs
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (24 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 025/187] mm/page_ext.c: fix an imbalance with kmemleak Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 027/187] mm,oom: dont kill global init via memory.oom.group Greg Kroah-Hartman
` (165 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Jordan, Dan Carpenter, Huang,
Ying, Andrea Parri, Peter Zijlstra (Intel),
Alan Stern, Andi Kleen, Dave Hansen, Omar Sandoval,
Paul McKenney, Shaohua Li, Stephen Rothwell, Tejun Heo,
Will Deacon, Andrew Morton, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c10d38cc8d3e43f946b6c2bf4602c86791587f30 ]
Dan Carpenter reports a potential NULL dereference in
get_swap_page_of_type:
Smatch complains that the NULL checks on "si" aren't consistent. This
seems like a real bug because we have not ensured that the type is
valid and so "si" can be NULL.
Add the missing check for NULL, taking care to use a read barrier to
ensure CPU1 observes CPU0's updates in the correct order:
CPU0 CPU1
alloc_swap_info() if (type >= nr_swapfiles)
swap_info[type] = p /* handle invalid entry */
smp_wmb() smp_rmb()
++nr_swapfiles p = swap_info[type]
Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before
CPU0's write to swap_info[type] and read NULL from swap_info[type].
Ying Huang noticed other places in swapfile.c don't order these reads
properly. Introduce swap_type_to_swap_info to encourage correct usage.
Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model
(see tools/memory-model/Documentation/explanation.txt).
This ordering need not be enforced in places where swap_lock is held
(e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles
and the swap_info array.
Link: http://lkml.kernel.org/r/20190131024410.29859-1-daniel.m.jordan@oracle.com
Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/swapfile.c | 51 +++++++++++++++++++++++++++++----------------------
1 file changed, 29 insertions(+), 22 deletions(-)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 340ef3177686..0047dcaf9369 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -98,6 +98,15 @@ static atomic_t proc_poll_event = ATOMIC_INIT(0);
atomic_t nr_rotate_swap = ATOMIC_INIT(0);
+static struct swap_info_struct *swap_type_to_swap_info(int type)
+{
+ if (type >= READ_ONCE(nr_swapfiles))
+ return NULL;
+
+ smp_rmb(); /* Pairs with smp_wmb in alloc_swap_info. */
+ return READ_ONCE(swap_info[type]);
+}
+
static inline unsigned char swap_count(unsigned char ent)
{
return ent & ~SWAP_HAS_CACHE; /* may include COUNT_CONTINUED flag */
@@ -1030,12 +1039,14 @@ noswap:
/* The only caller of this function is now suspend routine */
swp_entry_t get_swap_page_of_type(int type)
{
- struct swap_info_struct *si;
+ struct swap_info_struct *si = swap_type_to_swap_info(type);
pgoff_t offset;
- si = swap_info[type];
+ if (!si)
+ goto fail;
+
spin_lock(&si->lock);
- if (si && (si->flags & SWP_WRITEOK)) {
+ if (si->flags & SWP_WRITEOK) {
atomic_long_dec(&nr_swap_pages);
/* This is called for allocating swap entry, not cache */
offset = scan_swap_map(si, 1);
@@ -1046,6 +1057,7 @@ swp_entry_t get_swap_page_of_type(int type)
atomic_long_inc(&nr_swap_pages);
}
spin_unlock(&si->lock);
+fail:
return (swp_entry_t) {0};
}
@@ -1057,9 +1069,9 @@ static struct swap_info_struct *__swap_info_get(swp_entry_t entry)
if (!entry.val)
goto out;
type = swp_type(entry);
- if (type >= nr_swapfiles)
+ p = swap_type_to_swap_info(type);
+ if (!p)
goto bad_nofile;
- p = swap_info[type];
if (!(p->flags & SWP_USED))
goto bad_device;
offset = swp_offset(entry);
@@ -1708,10 +1720,9 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
sector_t swapdev_block(int type, pgoff_t offset)
{
struct block_device *bdev;
+ struct swap_info_struct *si = swap_type_to_swap_info(type);
- if ((unsigned int)type >= nr_swapfiles)
- return 0;
- if (!(swap_info[type]->flags & SWP_WRITEOK))
+ if (!si || !(si->flags & SWP_WRITEOK))
return 0;
return map_swap_entry(swp_entry(type, offset), &bdev);
}
@@ -2269,7 +2280,7 @@ static sector_t map_swap_entry(swp_entry_t entry, struct block_device **bdev)
struct swap_extent *se;
pgoff_t offset;
- sis = swap_info[swp_type(entry)];
+ sis = swp_swap_info(entry);
*bdev = sis->bdev;
offset = swp_offset(entry);
@@ -2707,9 +2718,7 @@ static void *swap_start(struct seq_file *swap, loff_t *pos)
if (!l)
return SEQ_START_TOKEN;
- for (type = 0; type < nr_swapfiles; type++) {
- smp_rmb(); /* read nr_swapfiles before swap_info[type] */
- si = swap_info[type];
+ for (type = 0; (si = swap_type_to_swap_info(type)); type++) {
if (!(si->flags & SWP_USED) || !si->swap_map)
continue;
if (!--l)
@@ -2729,9 +2738,7 @@ static void *swap_next(struct seq_file *swap, void *v, loff_t *pos)
else
type = si->type + 1;
- for (; type < nr_swapfiles; type++) {
- smp_rmb(); /* read nr_swapfiles before swap_info[type] */
- si = swap_info[type];
+ for (; (si = swap_type_to_swap_info(type)); type++) {
if (!(si->flags & SWP_USED) || !si->swap_map)
continue;
++*pos;
@@ -2838,14 +2845,14 @@ static struct swap_info_struct *alloc_swap_info(void)
}
if (type >= nr_swapfiles) {
p->type = type;
- swap_info[type] = p;
+ WRITE_ONCE(swap_info[type], p);
/*
* Write swap_info[type] before nr_swapfiles, in case a
* racing procfs swap_start() or swap_next() is reading them.
* (We never shrink nr_swapfiles, we never free this entry.)
*/
smp_wmb();
- nr_swapfiles++;
+ WRITE_ONCE(nr_swapfiles, nr_swapfiles + 1);
} else {
kvfree(p);
p = swap_info[type];
@@ -3365,7 +3372,7 @@ static int __swap_duplicate(swp_entry_t entry, unsigned char usage)
{
struct swap_info_struct *p;
struct swap_cluster_info *ci;
- unsigned long offset, type;
+ unsigned long offset;
unsigned char count;
unsigned char has_cache;
int err = -EINVAL;
@@ -3373,10 +3380,10 @@ static int __swap_duplicate(swp_entry_t entry, unsigned char usage)
if (non_swap_entry(entry))
goto out;
- type = swp_type(entry);
- if (type >= nr_swapfiles)
+ p = swp_swap_info(entry);
+ if (!p)
goto bad_file;
- p = swap_info[type];
+
offset = swp_offset(entry);
if (unlikely(offset >= p->max))
goto out;
@@ -3473,7 +3480,7 @@ int swapcache_prepare(swp_entry_t entry)
struct swap_info_struct *swp_swap_info(swp_entry_t entry)
{
- return swap_info[swp_type(entry)];
+ return swap_type_to_swap_info(swp_type(entry));
}
struct swap_info_struct *page_swap_info(struct page *page)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 027/187] mm,oom: dont kill global init via memory.oom.group
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (25 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 026/187] mm, swap: bounds check swap_info array accesses to avoid NULL derefs Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 028/187] memcg: killed threads should not invoke memcg OOM killer Greg Kroah-Hartman
` (164 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tetsuo Handa, Michal Hocko,
Roman Gushchin, Johannes Weiner, Andrew Morton, Linus Torvalds,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d342a0b38674867ea67fde47b0e1e60ffe9f17a2 ]
Since setting global init process to some memory cgroup is technically
possible, oom_kill_memcg_member() must check it.
Tasks in /test1 are going to be killed due to memory.oom.group set
Memory cgroup out of memory: Killed process 1 (systemd) total-vm:43400kB, anon-rss:1228kB, file-rss:3992kB, shmem-rss:0kB
oom_reaper: reaped process 1 (systemd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000008b
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
int main(int argc, char *argv[])
{
static char buffer[10485760];
static int pipe_fd[2] = { EOF, EOF };
unsigned int i;
int fd;
char buf[64] = { };
if (pipe(pipe_fd))
return 1;
if (chdir("/sys/fs/cgroup/"))
return 1;
fd = open("cgroup.subtree_control", O_WRONLY);
write(fd, "+memory", 7);
close(fd);
mkdir("test1", 0755);
fd = open("test1/memory.oom.group", O_WRONLY);
write(fd, "1", 1);
close(fd);
fd = open("test1/cgroup.procs", O_WRONLY);
write(fd, "1", 1);
snprintf(buf, sizeof(buf) - 1, "%d", getpid());
write(fd, buf, strlen(buf));
close(fd);
snprintf(buf, sizeof(buf) - 1, "%lu", sizeof(buffer) * 5);
fd = open("test1/memory.max", O_WRONLY);
write(fd, buf, strlen(buf));
close(fd);
for (i = 0; i < 10; i++)
if (fork() == 0) {
char c;
close(pipe_fd[1]);
read(pipe_fd[0], &c, 1);
memset(buffer, 0, sizeof(buffer));
sleep(3);
_exit(0);
}
close(pipe_fd[0]);
close(pipe_fd[1]);
sleep(3);
return 0;
}
[ 37.052923][ T9185] a.out invoked oom-killer: gfp_mask=0xcc0(GFP_KERNEL), order=0, oom_score_adj=0
[ 37.056169][ T9185] CPU: 4 PID: 9185 Comm: a.out Kdump: loaded Not tainted 5.0.0-rc4-next-20190131 #280
[ 37.059205][ T9185] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
[ 37.062954][ T9185] Call Trace:
[ 37.063976][ T9185] dump_stack+0x67/0x95
[ 37.065263][ T9185] dump_header+0x51/0x570
[ 37.066619][ T9185] ? trace_hardirqs_on+0x3f/0x110
[ 37.068171][ T9185] ? _raw_spin_unlock_irqrestore+0x3d/0x70
[ 37.069967][ T9185] oom_kill_process+0x18d/0x210
[ 37.071515][ T9185] out_of_memory+0x11b/0x380
[ 37.072936][ T9185] mem_cgroup_out_of_memory+0xb6/0xd0
[ 37.074601][ T9185] try_charge+0x790/0x820
[ 37.076021][ T9185] mem_cgroup_try_charge+0x42/0x1d0
[ 37.077629][ T9185] mem_cgroup_try_charge_delay+0x11/0x30
[ 37.079370][ T9185] do_anonymous_page+0x105/0x5e0
[ 37.080939][ T9185] __handle_mm_fault+0x9cb/0x1070
[ 37.082485][ T9185] handle_mm_fault+0x1b2/0x3a0
[ 37.083819][ T9185] ? handle_mm_fault+0x47/0x3a0
[ 37.085181][ T9185] __do_page_fault+0x255/0x4c0
[ 37.086529][ T9185] do_page_fault+0x28/0x260
[ 37.087788][ T9185] ? page_fault+0x8/0x30
[ 37.088978][ T9185] page_fault+0x1e/0x30
[ 37.090142][ T9185] RIP: 0033:0x7f8b183aefe0
[ 37.091433][ T9185] Code: 20 f3 44 0f 7f 44 17 d0 f3 44 0f 7f 47 30 f3 44 0f 7f 44 17 c0 48 01 fa 48 83 e2 c0 48 39 d1 74 a3 66 0f 1f 84 00 00 00 00 00 <66> 44 0f 7f 01 66 44 0f 7f 41 10 66 44 0f 7f 41 20 66 44 0f 7f 41
[ 37.096917][ T9185] RSP: 002b:00007fffc5d329e8 EFLAGS: 00010206
[ 37.098615][ T9185] RAX: 00000000006010e0 RBX: 0000000000000008 RCX: 0000000000c30000
[ 37.100905][ T9185] RDX: 00000000010010c0 RSI: 0000000000000000 RDI: 00000000006010e0
[ 37.103349][ T9185] RBP: 0000000000000000 R08: 00007f8b188f4740 R09: 0000000000000000
[ 37.105797][ T9185] R10: 00007fffc5d32420 R11: 00007f8b183aef40 R12: 0000000000000005
[ 37.108228][ T9185] R13: 0000000000000000 R14: ffffffffffffffff R15: 0000000000000000
[ 37.110840][ T9185] memory: usage 51200kB, limit 51200kB, failcnt 125
[ 37.113045][ T9185] memory+swap: usage 0kB, limit 9007199254740988kB, failcnt 0
[ 37.115808][ T9185] kmem: usage 0kB, limit 9007199254740988kB, failcnt 0
[ 37.117660][ T9185] Memory cgroup stats for /test1: cache:0KB rss:49484KB rss_huge:30720KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB inactive_anon:0KB active_anon:49700KB inactive_file:0KB active_file:0KB unevictable:0KB
[ 37.123371][ T9185] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,oom_memcg=/test1,task_memcg=/test1,task=a.out,pid=9188,uid=0
[ 37.128158][ T9185] Memory cgroup out of memory: Killed process 9188 (a.out) total-vm:14456kB, anon-rss:10324kB, file-rss:504kB, shmem-rss:0kB
[ 37.132710][ T9185] Tasks in /test1 are going to be killed due to memory.oom.group set
[ 37.132833][ T54] oom_reaper: reaped process 9188 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[ 37.135498][ T9185] Memory cgroup out of memory: Killed process 1 (systemd) total-vm:43400kB, anon-rss:1228kB, file-rss:3992kB, shmem-rss:0kB
[ 37.143434][ T9185] Memory cgroup out of memory: Killed process 9182 (a.out) total-vm:14456kB, anon-rss:76kB, file-rss:588kB, shmem-rss:0kB
[ 37.144328][ T54] oom_reaper: reaped process 1 (systemd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[ 37.147585][ T9185] Memory cgroup out of memory: Killed process 9183 (a.out) total-vm:14456kB, anon-rss:6228kB, file-rss:512kB, shmem-rss:0kB
[ 37.157222][ T9185] Memory cgroup out of memory: Killed process 9184 (a.out) total-vm:14456kB, anon-rss:6228kB, file-rss:508kB, shmem-rss:0kB
[ 37.157259][ T9185] Memory cgroup out of memory: Killed process 9185 (a.out) total-vm:14456kB, anon-rss:6228kB, file-rss:512kB, shmem-rss:0kB
[ 37.157291][ T9185] Memory cgroup out of memory: Killed process 9186 (a.out) total-vm:14456kB, anon-rss:4180kB, file-rss:508kB, shmem-rss:0kB
[ 37.157306][ T54] oom_reaper: reaped process 9183 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[ 37.157328][ T9185] Memory cgroup out of memory: Killed process 9187 (a.out) total-vm:14456kB, anon-rss:4180kB, file-rss:512kB, shmem-rss:0kB
[ 37.157452][ T9185] Memory cgroup out of memory: Killed process 9189 (a.out) total-vm:14456kB, anon-rss:6228kB, file-rss:512kB, shmem-rss:0kB
[ 37.158733][ T9185] Memory cgroup out of memory: Killed process 9190 (a.out) total-vm:14456kB, anon-rss:552kB, file-rss:512kB, shmem-rss:0kB
[ 37.160083][ T54] oom_reaper: reaped process 9186 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[ 37.160187][ T54] oom_reaper: reaped process 9189 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[ 37.206941][ T54] oom_reaper: reaped process 9185 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[ 37.212300][ T9185] Memory cgroup out of memory: Killed process 9191 (a.out) total-vm:14456kB, anon-rss:4180kB, file-rss:512kB, shmem-rss:0kB
[ 37.212317][ T54] oom_reaper: reaped process 9190 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[ 37.218860][ T9185] Memory cgroup out of memory: Killed process 9192 (a.out) total-vm:14456kB, anon-rss:1080kB, file-rss:512kB, shmem-rss:0kB
[ 37.227667][ T54] oom_reaper: reaped process 9192 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
[ 37.292323][ T9193] abrt-hook-ccpp (9193) used greatest stack depth: 10480 bytes left
[ 37.351843][ T1] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000008b
[ 37.354833][ T1] CPU: 7 PID: 1 Comm: systemd Kdump: loaded Not tainted 5.0.0-rc4-next-20190131 #280
[ 37.357876][ T1] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
[ 37.361685][ T1] Call Trace:
[ 37.363239][ T1] dump_stack+0x67/0x95
[ 37.365010][ T1] panic+0xfc/0x2b0
[ 37.366853][ T1] do_exit+0xd55/0xd60
[ 37.368595][ T1] do_group_exit+0x47/0xc0
[ 37.370415][ T1] get_signal+0x32a/0x920
[ 37.372449][ T1] ? _raw_spin_unlock_irqrestore+0x3d/0x70
[ 37.374596][ T1] do_signal+0x32/0x6e0
[ 37.376430][ T1] ? exit_to_usermode_loop+0x26/0x9b
[ 37.378418][ T1] ? prepare_exit_to_usermode+0xa8/0xd0
[ 37.380571][ T1] exit_to_usermode_loop+0x3e/0x9b
[ 37.382588][ T1] prepare_exit_to_usermode+0xa8/0xd0
[ 37.384594][ T1] ? page_fault+0x8/0x30
[ 37.386453][ T1] retint_user+0x8/0x18
[ 37.388160][ T1] RIP: 0033:0x7f42c06974a8
[ 37.389922][ T1] Code: Bad RIP value.
[ 37.391788][ T1] RSP: 002b:00007ffc3effd388 EFLAGS: 00010213
[ 37.394075][ T1] RAX: 000000000000000e RBX: 00007ffc3effd390 RCX: 0000000000000000
[ 37.396963][ T1] RDX: 000000000000002a RSI: 00007ffc3effd390 RDI: 0000000000000004
[ 37.399550][ T1] RBP: 00007ffc3effd680 R08: 0000000000000000 R09: 0000000000000000
[ 37.402334][ T1] R10: 00000000ffffffff R11: 0000000000000246 R12: 0000000000000001
[ 37.404890][ T1] R13: ffffffffffffffff R14: 0000000000000884 R15: 000056460b1ac3b0
Link: http://lkml.kernel.org/r/201902010336.x113a4EO027170@www262.sakura.ne.jp
Fixes: 3d8b38eb81cac813 ("mm, oom: introduce memory.oom.group")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/oom_kill.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index e66ac8a47dd6..dbddb7a409dd 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -915,7 +915,8 @@ static void __oom_kill_process(struct task_struct *victim)
*/
static int oom_kill_memcg_member(struct task_struct *task, void *unused)
{
- if (task->signal->oom_score_adj != OOM_SCORE_ADJ_MIN) {
+ if (task->signal->oom_score_adj != OOM_SCORE_ADJ_MIN &&
+ !is_global_init(task)) {
get_task_struct(task);
__oom_kill_process(task);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 028/187] memcg: killed threads should not invoke memcg OOM killer
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (26 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 027/187] mm,oom: dont kill global init via memory.oom.group Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 029/187] mm, mempolicy: fix uninit memory access Greg Kroah-Hartman
` (163 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tetsuo Handa, Michal Hocko,
Johannes Weiner, David Rientjes, Kirill Tkhai, Andrew Morton,
Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7775face207922ea62a4e96b9cd45abfdc7b9840 ]
If a memory cgroup contains a single process with many threads
(including different process group sharing the mm) then it is possible
to trigger a race when the oom killer complains that there are no oom
elible tasks and complain into the log which is both annoying and
confusing because there is no actual problem. The race looks as
follows:
P1 oom_reaper P2
try_charge try_charge
mem_cgroup_out_of_memory
mutex_lock(oom_lock)
out_of_memory
oom_kill_process(P1,P2)
wake_oom_reaper
mutex_unlock(oom_lock)
oom_reap_task
mutex_lock(oom_lock)
select_bad_process # no victim
The problem is more visible with many threads.
Fix this by checking for fatal_signal_pending from
mem_cgroup_out_of_memory when the oom_lock is already held.
The oom bypass is safe because we do the same early in the try_charge
path already. The situation migh have changed in the mean time. It
should be safe to check for fatal_signal_pending and tsk_is_oom_victim
but for a better code readability abstract the current charge bypass
condition into should_force_charge and reuse it from that path. "
Link: http://lkml.kernel.org/r/01370f70-e1f6-ebe4-b95e-0df21a0bc15e@i-love.sakura.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/memcontrol.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 9518aefd8cbb..7c712c4565e6 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -248,6 +248,12 @@ enum res_type {
iter != NULL; \
iter = mem_cgroup_iter(NULL, iter, NULL))
+static inline bool should_force_charge(void)
+{
+ return tsk_is_oom_victim(current) || fatal_signal_pending(current) ||
+ (current->flags & PF_EXITING);
+}
+
/* Some nice accessors for the vmpressure. */
struct vmpressure *memcg_to_vmpressure(struct mem_cgroup *memcg)
{
@@ -1382,8 +1388,13 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
};
bool ret;
- mutex_lock(&oom_lock);
- ret = out_of_memory(&oc);
+ if (mutex_lock_killable(&oom_lock))
+ return true;
+ /*
+ * A few threads which were not waiting at mutex_lock_killable() can
+ * fail to bail out. Therefore, check again after holding oom_lock.
+ */
+ ret = should_force_charge() || out_of_memory(&oc);
mutex_unlock(&oom_lock);
return ret;
}
@@ -2200,9 +2211,7 @@ retry:
* bypass the last charges so that they can exit quickly and
* free their memory.
*/
- if (unlikely(tsk_is_oom_victim(current) ||
- fatal_signal_pending(current) ||
- current->flags & PF_EXITING))
+ if (unlikely(should_force_charge()))
goto force;
/*
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 029/187] mm, mempolicy: fix uninit memory access
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (27 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 028/187] memcg: killed threads should not invoke memcg OOM killer Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 030/187] mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512! Greg Kroah-Hartman
` (162 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vlastimil Babka,
syzbot+b19c2dc2c990ea657a71, Alexander Potapenko, Dmitry Vyukov,
Andrea Arcangeli, Kirill A. Shutemov, Michal Hocko,
David Rientjes, Yisheng Xie, zhong jiang, Andrew Morton,
Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2e25644e8da4ed3a27e7b8315aaae74660be72dc ]
Syzbot with KMSAN reports (excerpt):
==================================================================
BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:353 [inline]
BUG: KMSAN: uninit-value in mpol_rebind_mm+0x249/0x370 mm/mempolicy.c:384
CPU: 1 PID: 17420 Comm: syz-executor4 Not tainted 4.20.0-rc7+ #15
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
__msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:295
mpol_rebind_policy mm/mempolicy.c:353 [inline]
mpol_rebind_mm+0x249/0x370 mm/mempolicy.c:384
update_tasks_nodemask+0x608/0xca0 kernel/cgroup/cpuset.c:1120
update_nodemasks_hier kernel/cgroup/cpuset.c:1185 [inline]
update_nodemask kernel/cgroup/cpuset.c:1253 [inline]
cpuset_write_resmask+0x2a98/0x34b0 kernel/cgroup/cpuset.c:1728
...
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmem_cache_alloc+0x572/0xb90 mm/slub.c:2777
mpol_new mm/mempolicy.c:276 [inline]
do_mbind mm/mempolicy.c:1180 [inline]
kernel_mbind+0x8a7/0x31a0 mm/mempolicy.c:1347
__do_sys_mbind mm/mempolicy.c:1354 [inline]
As it's difficult to report where exactly the uninit value resides in
the mempolicy object, we have to guess a bit. mm/mempolicy.c:353
contains this part of mpol_rebind_policy():
if (!mpol_store_user_nodemask(pol) &&
nodes_equal(pol->w.cpuset_mems_allowed, *newmask))
"mpol_store_user_nodemask(pol)" is testing pol->flags, which I couldn't
ever see being uninitialized after leaving mpol_new(). So I'll guess
it's actually about accessing pol->w.cpuset_mems_allowed on line 354,
but still part of statement starting on line 353.
For w.cpuset_mems_allowed to be not initialized, and the nodes_equal()
reachable for a mempolicy where mpol_set_nodemask() is called in
do_mbind(), it seems the only possibility is a MPOL_PREFERRED policy
with empty set of nodes, i.e. MPOL_LOCAL equivalent, with MPOL_F_LOCAL
flag. Let's exclude such policies from the nodes_equal() check. Note
the uninit access should be benign anyway, as rebinding this kind of
policy is always a no-op. Therefore no actual need for stable
inclusion.
Link: http://lkml.kernel.org/r/a71997c3-e8ae-a787-d5ce-3db05768b27c@suse.cz
Link: http://lkml.kernel.org/r/73da3e9c-cc84-509e-17d9-0c434bb9967d@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: syzbot+b19c2dc2c990ea657a71@syzkaller.appspotmail.com
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/mempolicy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index f32d0a5be4fb..360b24bc69e5 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -350,7 +350,7 @@ static void mpol_rebind_policy(struct mempolicy *pol, const nodemask_t *newmask)
{
if (!pol)
return;
- if (!mpol_store_user_nodemask(pol) &&
+ if (!mpol_store_user_nodemask(pol) && !(pol->flags & MPOL_F_LOCAL) &&
nodes_equal(pol->w.cpuset_mems_allowed, *newmask))
return;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 030/187] mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512!
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (28 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 029/187] mm, mempolicy: fix uninit memory access Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 031/187] mm/slab.c: kmemleak no scan alien caches Greg Kroah-Hartman
` (161 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Uladzislau Rezki (Sony),
Andrew Morton, Ingo Molnar, Joel Fernandes, Matthew Wilcox,
Michal Hocko, Oleksiy Avramchenko, Steven Rostedt, Tejun Heo,
Thomas Garnier, Thomas Gleixner, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit afd07389d3f4933c7f7817a92fb5e053d59a3182 ]
One of the vmalloc stress test case triggers the kernel BUG():
<snip>
[60.562151] ------------[ cut here ]------------
[60.562154] kernel BUG at mm/vmalloc.c:512!
[60.562206] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[60.562247] CPU: 0 PID: 430 Comm: vmalloc_test/0 Not tainted 4.20.0+ #161
[60.562293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[60.562351] RIP: 0010:alloc_vmap_area+0x36f/0x390
<snip>
it can happen due to big align request resulting in overflowing of
calculated address, i.e. it becomes 0 after ALIGN()'s fixup.
Fix it by checking if calculated address is within vstart/vend range.
Link: http://lkml.kernel.org/r/20190124115648.9433-2-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/vmalloc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 91a789a46b12..a46ec261a44e 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -498,7 +498,11 @@ nocache:
}
found:
- if (addr + size > vend)
+ /*
+ * Check also calculated address against the vstart,
+ * because it can be 0 because of big align request.
+ */
+ if (addr + size > vend || addr < vstart)
goto overflow;
va->va_start = addr;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 031/187] mm/slab.c: kmemleak no scan alien caches
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (29 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 030/187] mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512! Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 032/187] ocfs2: fix a panic problem caused by o2cb_ctl Greg Kroah-Hartman
` (160 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Andrew Morton,
Christoph Lameter, Pekka Enberg, David Rientjes, Joonsoo Kim,
Catalin Marinas, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 92d1d07daad65c300c7d0b68bbef8867e9895d54 ]
Kmemleak throws endless warnings during boot due to in
__alloc_alien_cache(),
alc = kmalloc_node(memsize, gfp, node);
init_arraycache(&alc->ac, entries, batch);
kmemleak_no_scan(ac);
Kmemleak does not track the array cache (alc->ac) but the alien cache
(alc) instead, so let it track the latter by lifting kmemleak_no_scan()
out of init_arraycache().
There is another place that calls init_arraycache(), but
alloc_kmem_cache_cpus() uses the percpu allocation where will never be
considered as a leak.
kmemleak: Found object by alias at 0xffff8007b9aa7e38
CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2
Call trace:
dump_backtrace+0x0/0x168
show_stack+0x24/0x30
dump_stack+0x88/0xb0
lookup_object+0x84/0xac
find_and_get_object+0x84/0xe4
kmemleak_no_scan+0x74/0xf4
setup_kmem_cache_node+0x2b4/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
ret_from_fork+0x10/0x18
kmemleak: Object 0xffff8007b9aa7e00 (size 256):
kmemleak: comm "swapper/0", pid 1, jiffies 4294697137
kmemleak: min_count = 1
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
kmemleak_alloc+0x84/0xb8
kmem_cache_alloc_node_trace+0x31c/0x3a0
__kmalloc_node+0x58/0x78
setup_kmem_cache_node+0x26c/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
kmemleak: Not scanning unknown object at 0xffff8007b9aa7e38
CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2
Call trace:
dump_backtrace+0x0/0x168
show_stack+0x24/0x30
dump_stack+0x88/0xb0
kmemleak_no_scan+0x90/0xf4
setup_kmem_cache_node+0x2b4/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
ret_from_fork+0x10/0x18
Link: http://lkml.kernel.org/r/20190129184518.39808-1-cai@lca.pw
Fixes: 1fe00d50a9e8 ("slab: factor out initialization of array cache")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/slab.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/mm/slab.c b/mm/slab.c
index 364e42d5a399..b8e0ec74330f 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -563,14 +563,6 @@ static void start_cpu_timer(int cpu)
static void init_arraycache(struct array_cache *ac, int limit, int batch)
{
- /*
- * The array_cache structures contain pointers to free object.
- * However, when such objects are allocated or transferred to another
- * cache the pointers are not cleared and they could be counted as
- * valid references during a kmemleak scan. Therefore, kmemleak must
- * not scan such objects.
- */
- kmemleak_no_scan(ac);
if (ac) {
ac->avail = 0;
ac->limit = limit;
@@ -586,6 +578,14 @@ static struct array_cache *alloc_arraycache(int node, int entries,
struct array_cache *ac = NULL;
ac = kmalloc_node(memsize, gfp, node);
+ /*
+ * The array_cache structures contain pointers to free object.
+ * However, when such objects are allocated or transferred to another
+ * cache the pointers are not cleared and they could be counted as
+ * valid references during a kmemleak scan. Therefore, kmemleak must
+ * not scan such objects.
+ */
+ kmemleak_no_scan(ac);
init_arraycache(ac, entries, batchcount);
return ac;
}
@@ -680,6 +680,7 @@ static struct alien_cache *__alloc_alien_cache(int node, int entries,
alc = kmalloc_node(memsize, gfp, node);
if (alc) {
+ kmemleak_no_scan(alc);
init_arraycache(&alc->ac, entries, batch);
spin_lock_init(&alc->lock);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 032/187] ocfs2: fix a panic problem caused by o2cb_ctl
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (30 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 031/187] mm/slab.c: kmemleak no scan alien caches Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 033/187] f2fs: do not use mutex lock in atomic context Greg Kroah-Hartman
` (159 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jia Guo, Joseph Qi, Jun Piao,
Mark Fasheh, Joel Becker, Junxiao Bi, Changwei Ge, Andrew Morton,
Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cc725ef3cb202ef2019a3c67c8913efa05c3cce6 ]
In the process of creating a node, it will cause NULL pointer
dereference in kernel if o2cb_ctl failed in the interval (mkdir,
o2cb_set_node_attribute(node_num)] in function o2cb_add_node.
The node num is initialized to 0 in function o2nm_node_group_make_item,
o2nm_node_group_drop_item will mistake the node number 0 for a valid
node number when we delete the node before the node number is set
correctly. If the local node number of the current host happens to be
0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while
o2hb_thread still running. The panic stack is generated as follows:
o2hb_thread
\-o2hb_do_disk_heartbeat
\-o2hb_check_own_slot
|-slot = ®->hr_slots[o2nm_this_node()];
//o2nm_this_node() return O2NM_INVALID_NODE_NUM
We need to check whether the node number is set when we delete the node.
Link: http://lkml.kernel.org/r/133d8045-72cc-863e-8eae-5013f9f6bc51@huawei.com
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ocfs2/cluster/nodemanager.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index 0e4166cc23a0..4ac775e32240 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -621,13 +621,15 @@ static void o2nm_node_group_drop_item(struct config_group *group,
struct o2nm_node *node = to_o2nm_node(item);
struct o2nm_cluster *cluster = to_o2nm_cluster(group->cg_item.ci_parent);
- o2net_disconnect_node(node);
+ if (cluster->cl_nodes[node->nd_num] == node) {
+ o2net_disconnect_node(node);
- if (cluster->cl_has_local &&
- (cluster->cl_local_node == node->nd_num)) {
- cluster->cl_has_local = 0;
- cluster->cl_local_node = O2NM_INVALID_NODE_NUM;
- o2net_stop_listening(node);
+ if (cluster->cl_has_local &&
+ (cluster->cl_local_node == node->nd_num)) {
+ cluster->cl_has_local = 0;
+ cluster->cl_local_node = O2NM_INVALID_NODE_NUM;
+ o2net_stop_listening(node);
+ }
}
/* XXX call into net to stop this node from trading messages */
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 033/187] f2fs: do not use mutex lock in atomic context
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (31 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 032/187] ocfs2: fix a panic problem caused by o2cb_ctl Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 034/187] fs/file.c: initialize init_files.resize_wait Greg Kroah-Hartman
` (158 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sahitya Tummala, Chao Yu,
Jaegeuk Kim, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9083977dabf3833298ddcd40dee28687f1e6b483 ]
Fix below warning coming because of using mutex lock in atomic context.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:98
in_atomic(): 1, irqs_disabled(): 0, pid: 585, name: sh
Preemption disabled at: __radix_tree_preload+0x28/0x130
Call trace:
dump_backtrace+0x0/0x2b4
show_stack+0x20/0x28
dump_stack+0xa8/0xe0
___might_sleep+0x144/0x194
__might_sleep+0x58/0x8c
mutex_lock+0x2c/0x48
f2fs_trace_pid+0x88/0x14c
f2fs_set_node_page_dirty+0xd0/0x184
Do not use f2fs_radix_tree_insert() to avoid doing cond_resched() with
spin_lock() acquired.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/trace.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/fs/f2fs/trace.c b/fs/f2fs/trace.c
index a1fcd00bbb2b..8ac1851a21c0 100644
--- a/fs/f2fs/trace.c
+++ b/fs/f2fs/trace.c
@@ -17,7 +17,7 @@
#include "trace.h"
static RADIX_TREE(pids, GFP_ATOMIC);
-static struct mutex pids_lock;
+static spinlock_t pids_lock;
static struct last_io_info last_io;
static inline void __print_last_io(void)
@@ -61,23 +61,29 @@ void f2fs_trace_pid(struct page *page)
set_page_private(page, (unsigned long)pid);
+retry:
if (radix_tree_preload(GFP_NOFS))
return;
- mutex_lock(&pids_lock);
+ spin_lock(&pids_lock);
p = radix_tree_lookup(&pids, pid);
if (p == current)
goto out;
if (p)
radix_tree_delete(&pids, pid);
- f2fs_radix_tree_insert(&pids, pid, current);
+ if (radix_tree_insert(&pids, pid, current)) {
+ spin_unlock(&pids_lock);
+ radix_tree_preload_end();
+ cond_resched();
+ goto retry;
+ }
trace_printk("%3x:%3x %4x %-16s\n",
MAJOR(inode->i_sb->s_dev), MINOR(inode->i_sb->s_dev),
pid, current->comm);
out:
- mutex_unlock(&pids_lock);
+ spin_unlock(&pids_lock);
radix_tree_preload_end();
}
@@ -122,7 +128,7 @@ void f2fs_trace_ios(struct f2fs_io_info *fio, int flush)
void f2fs_build_trace_ios(void)
{
- mutex_init(&pids_lock);
+ spin_lock_init(&pids_lock);
}
#define PIDVEC_SIZE 128
@@ -150,7 +156,7 @@ void f2fs_destroy_trace_ios(void)
pid_t next_pid = 0;
unsigned int found;
- mutex_lock(&pids_lock);
+ spin_lock(&pids_lock);
while ((found = gang_lookup_pids(pid, next_pid, PIDVEC_SIZE))) {
unsigned idx;
@@ -158,5 +164,5 @@ void f2fs_destroy_trace_ios(void)
for (idx = 0; idx < found; idx++)
radix_tree_delete(&pids, pid[idx]);
}
- mutex_unlock(&pids_lock);
+ spin_unlock(&pids_lock);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 034/187] fs/file.c: initialize init_files.resize_wait
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (32 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 033/187] f2fs: do not use mutex lock in atomic context Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 035/187] page_poison: play nicely with KASAN Greg Kroah-Hartman
` (157 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Richard Zhang, Andrew Morton,
Al Viro, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5704a06810682683355624923547b41540e2801a ]
(Taken from https://bugzilla.kernel.org/show_bug.cgi?id=200647)
'get_unused_fd_flags' in kthread cause kernel crash. It works fine on
4.1, but causes crash after get 64 fds. It also cause crash on
ubuntu1404/1604/1804, centos7.5, and the crash messages are almost the
same.
The crash message on centos7.5 shows below:
start fd 61
start fd 62
start fd 63
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: __wake_up_common+0x2e/0x90
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: test(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter devlink sunrpc kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg ppdev pcspkr virtio_balloon parport_pc parport i2c_piix4 joydev ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi virtio_scsi virtio_console virtio_net cirrus drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm crct10dif_pclmul crct10dif_common crc32c_intel drm ata_piix serio_raw libata virtio_pci virtio_ring i2c_core
virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CPU: 2 PID: 1820 Comm: test_fd Kdump: loaded Tainted: G OE ------------ 3.10.0-862.3.3.el7.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
task: ffff8e92b9431fa0 ti: ffff8e94247a0000 task.ti: ffff8e94247a0000
RIP: 0010:__wake_up_common+0x2e/0x90
RSP: 0018:ffff8e94247a2d18 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffffffff9d09daa0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffff9d09daa0
RBP: ffff8e94247a2d50 R08: 0000000000000000 R09: ffff8e92b95dfda8
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9d09daa8
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8e9434e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000017c686000 CR4: 00000000000207e0
Call Trace:
__wake_up+0x39/0x50
expand_files+0x131/0x250
__alloc_fd+0x47/0x170
get_unused_fd_flags+0x30/0x40
test_fd+0x12a/0x1c0 [test]
kthread+0xd1/0xe0
ret_from_fork_nospec_begin+0x21/0x21
Code: 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 54 49 89 fc 49 83 c4 08 53 48 83 ec 10 48 8b 47 08 89 55 cc 4c 89 45 d0 <48> 8b 08 49 39 c4 48 8d 78 e8 4c 8d 69 e8 75 08 eb 3b 4c 89 ef
RIP __wake_up_common+0x2e/0x90
RSP <ffff8e94247a2d18>
CR2: 0000000000000000
This issue exists since CentOS 7.5 3.10.0-862 and CentOS 7.4
(3.10.0-693.21.1 ) is ok. Root cause: the item 'resize_wait' is not
initialized before being used.
Reported-by: Richard Zhang <zhang.zijian@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/file.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/file.c b/fs/file.c
index 7ffd6e9d103d..780d29e58847 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -457,6 +457,7 @@ struct files_struct init_files = {
.full_fds_bits = init_files.full_fds_bits_init,
},
.file_lock = __SPIN_LOCK_UNLOCKED(init_files.file_lock),
+ .resize_wait = __WAIT_QUEUE_HEAD_INITIALIZER(init_files.resize_wait),
};
static unsigned int find_next_fd(struct fdtable *fdt, unsigned int start)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 035/187] page_poison: play nicely with KASAN
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (33 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 034/187] fs/file.c: initialize init_files.resize_wait Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 036/187] cifs: use correct format characters Greg Kroah-Hartman
` (156 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qian Cai, Andrey Ryabinin,
Andrew Morton, Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4117992df66a26fa33908b4969e04801534baab1 ]
KASAN does not play well with the page poisoning (CONFIG_PAGE_POISONING).
It triggers false positives in the allocation path:
BUG: KASAN: use-after-free in memchr_inv+0x2ea/0x330
Read of size 8 at addr ffff88881f800000 by task swapper/0
CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc1+ #54
Call Trace:
dump_stack+0xe0/0x19a
print_address_description.cold.2+0x9/0x28b
kasan_report.cold.3+0x7a/0xb5
__asan_report_load8_noabort+0x19/0x20
memchr_inv+0x2ea/0x330
kernel_poison_pages+0x103/0x3d5
get_page_from_freelist+0x15e7/0x4d90
because KASAN has not yet unpoisoned the shadow page for allocation
before it checks memchr_inv() but only found a stale poison pattern.
Also, false positives in free path,
BUG: KASAN: slab-out-of-bounds in kernel_poison_pages+0x29e/0x3d5
Write of size 4096 at addr ffff8888112cc000 by task swapper/0/1
CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc1+ #55
Call Trace:
dump_stack+0xe0/0x19a
print_address_description.cold.2+0x9/0x28b
kasan_report.cold.3+0x7a/0xb5
check_memory_region+0x22d/0x250
memset+0x28/0x40
kernel_poison_pages+0x29e/0x3d5
__free_pages_ok+0x75f/0x13e0
due to KASAN adds poisoned redzones around slab objects, but the page
poisoning needs to poison the whole page.
Link: http://lkml.kernel.org/r/20190114233405.67843-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/page_alloc.c | 2 +-
mm/page_poison.c | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index ef99971c13dd..8e6932a140b8 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1922,8 +1922,8 @@ inline void post_alloc_hook(struct page *page, unsigned int order,
arch_alloc_page(page, order);
kernel_map_pages(page, 1 << order, 1);
- kernel_poison_pages(page, 1 << order, 1);
kasan_alloc_pages(page, order);
+ kernel_poison_pages(page, 1 << order, 1);
set_page_owner(page, order, gfp_flags);
}
diff --git a/mm/page_poison.c b/mm/page_poison.c
index aa2b3d34e8ea..6cfa8e7d7213 100644
--- a/mm/page_poison.c
+++ b/mm/page_poison.c
@@ -6,6 +6,7 @@
#include <linux/page_ext.h>
#include <linux/poison.h>
#include <linux/ratelimit.h>
+#include <linux/kasan.h>
static bool want_page_poisoning __read_mostly;
@@ -34,7 +35,10 @@ static void poison_page(struct page *page)
{
void *addr = kmap_atomic(page);
+ /* KASAN still think the page is in-use, so skip it. */
+ kasan_disable_current();
memset(addr, PAGE_POISON, PAGE_SIZE);
+ kasan_enable_current();
kunmap_atomic(addr);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 036/187] cifs: use correct format characters
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (34 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 035/187] page_poison: play nicely with KASAN Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 037/187] dm thin: add sanity checks to thin-pool and external snapshot creation Greg Kroah-Hartman
` (155 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Louis Taylor, Steve French,
Nick Desaulniers, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 259594bea574e515a148171b5cd84ce5cbdc028a ]
When compiling with -Wformat, clang emits the following warnings:
fs/cifs/smb1ops.c:312:20: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
tgt_total_cnt, total_in_tgt);
^~~~~~~~~~~~
fs/cifs/cifs_dfs_ref.c:289:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->flags, ref->server_type);
^~~~~~~~~~
fs/cifs/cifs_dfs_ref.c:289:16: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->flags, ref->server_type);
^~~~~~~~~~~~~~~~
fs/cifs/cifs_dfs_ref.c:291:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->ref_flag, ref->path_consumed);
^~~~~~~~~~~~~
fs/cifs/cifs_dfs_ref.c:291:19: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->ref_flag, ref->path_consumed);
^~~~~~~~~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for ints and unsigned
ints.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/cifs_dfs_ref.c | 4 ++--
fs/cifs/smb1ops.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 6b61df117fd4..563e2f6268c3 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -271,9 +271,9 @@ static void dump_referral(const struct dfs_info3_param *ref)
{
cifs_dbg(FYI, "DFS: ref path: %s\n", ref->path_name);
cifs_dbg(FYI, "DFS: node path: %s\n", ref->node_name);
- cifs_dbg(FYI, "DFS: fl: %hd, srv_type: %hd\n",
+ cifs_dbg(FYI, "DFS: fl: %d, srv_type: %d\n",
ref->flags, ref->server_type);
- cifs_dbg(FYI, "DFS: ref_flags: %hd, path_consumed: %hd\n",
+ cifs_dbg(FYI, "DFS: ref_flags: %d, path_consumed: %d\n",
ref->ref_flag, ref->path_consumed);
}
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index 378151e09e91..47db8eb6cbcf 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -308,7 +308,7 @@ coalesce_t2(char *second_buf, struct smb_hdr *target_hdr)
remaining = tgt_total_cnt - total_in_tgt;
if (remaining < 0) {
- cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%hu\n",
+ cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%u\n",
tgt_total_cnt, total_in_tgt);
return -EPROTO;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 037/187] dm thin: add sanity checks to thin-pool and external snapshot creation
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (35 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 036/187] cifs: use correct format characters Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 038/187] f2fs: fix to check inline_xattr_size boundary correctly Greg Kroah-Hartman
` (154 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Cai (Xiang Feng),
Mike Snitzer, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 70de2cbda8a5d788284469e755f8b097d339c240 ]
Invoking dm_get_device() twice on the same device path with different
modes is dangerous. Because in that case, upgrade_mode() will alloc a
new 'dm_dev' and free the old one, which may be referenced by a previous
caller. Dereferencing the dangling pointer will trigger kernel NULL
pointer dereference.
The following two cases can reproduce this issue. Actually, they are
invalid setups that must be disallowed, e.g.:
1. Creating a thin-pool with read_only mode, and the same device as
both metadata and data.
dmsetup create thinp --table \
"0 41943040 thin-pool /dev/vdb /dev/vdb 128 0 1 read_only"
BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
...
Call Trace:
new_read+0xfb/0x110 [dm_bufio]
dm_bm_read_lock+0x43/0x190 [dm_persistent_data]
? kmem_cache_alloc_trace+0x15c/0x1e0
__create_persistent_data_objects+0x65/0x3e0 [dm_thin_pool]
dm_pool_metadata_open+0x8c/0xf0 [dm_thin_pool]
pool_ctr.cold.79+0x213/0x913 [dm_thin_pool]
? realloc_argv+0x50/0x70 [dm_mod]
dm_table_add_target+0x14e/0x330 [dm_mod]
table_load+0x122/0x2e0 [dm_mod]
? dev_status+0x40/0x40 [dm_mod]
ctl_ioctl+0x1aa/0x3e0 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
do_vfs_ioctl+0xa2/0x600
? handle_mm_fault+0xda/0x200
? __do_page_fault+0x26c/0x4f0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
2. Creating a external snapshot using the same thin-pool device.
dmsetup create thinp --table \
"0 41943040 thin-pool /dev/vdc /dev/vdb 128 0 2 ignore_discard"
dmsetup message /dev/mapper/thinp 0 "create_thin 0"
dmsetup create snap --table \
"0 204800 thin /dev/mapper/thinp 0 /dev/mapper/thinp"
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
Call Trace:
? __alloc_pages_nodemask+0x13c/0x2e0
retrieve_status+0xa5/0x1f0 [dm_mod]
? dm_get_live_or_inactive_table.isra.7+0x20/0x20 [dm_mod]
table_status+0x61/0xa0 [dm_mod]
ctl_ioctl+0x1aa/0x3e0 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
do_vfs_ioctl+0xa2/0x600
ksys_ioctl+0x60/0x90
? ksys_write+0x4f/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/dm-thin.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index cd4220ee7004..435a2ee4a392 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -3283,6 +3283,13 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
as.argc = argc;
as.argv = argv;
+ /* make sure metadata and data are different devices */
+ if (!strcmp(argv[0], argv[1])) {
+ ti->error = "Error setting metadata or data device";
+ r = -EINVAL;
+ goto out_unlock;
+ }
+
/*
* Set default pool features.
*/
@@ -4167,6 +4174,12 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv)
tc->sort_bio_list = RB_ROOT;
if (argc == 3) {
+ if (!strcmp(argv[0], argv[2])) {
+ ti->error = "Error setting origin device";
+ r = -EINVAL;
+ goto bad_origin_dev;
+ }
+
r = dm_get_device(ti, argv[2], FMODE_READ, &origin_dev);
if (r) {
ti->error = "Error opening origin device";
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 038/187] f2fs: fix to check inline_xattr_size boundary correctly
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (36 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 037/187] dm thin: add sanity checks to thin-pool and external snapshot creation Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 039/187] cifs: Accept validate negotiate if server return NT_STATUS_NOT_SUPPORTED Greg Kroah-Hartman
` (153 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chao Yu, Jaegeuk Kim, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 500e0b28ecd3c5aade98f3c3a339d18dcb166bb6 ]
We use below condition to check inline_xattr_size boundary:
if (!F2FS_OPTION(sbi).inline_xattr_size ||
F2FS_OPTION(sbi).inline_xattr_size >=
DEF_ADDRS_PER_INODE -
F2FS_TOTAL_EXTRA_ATTR_SIZE -
DEF_INLINE_RESERVED_SIZE -
DEF_MIN_INLINE_SIZE)
There is there problems in that check:
- we should allow inline_xattr_size equaling to min size of inline
{data,dentry} area.
- F2FS_TOTAL_EXTRA_ATTR_SIZE and inline_xattr_size are based on
different size unit, previous one is 4 bytes, latter one is 1 bytes.
- DEF_MIN_INLINE_SIZE only indicate min size of inline data area,
however, we need to consider min size of inline dentry area as well,
minimal inline dentry should at least contain two entries: '.' and
'..', so that min inline_dentry size is 40 bytes.
.bitmap 1 * 1 = 1
.reserved 1 * 1 = 1
.dentry 11 * 2 = 22
.filename 8 * 2 = 16
total 40
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/f2fs.h | 1 -
fs/f2fs/super.c | 13 +++++++------
include/linux/f2fs_fs.h | 13 +++++++------
3 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 42aef5c94927..a3ba20e5946f 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -450,7 +450,6 @@ struct f2fs_flush_device {
/* for inline stuff */
#define DEF_INLINE_RESERVED_SIZE 1
-#define DEF_MIN_INLINE_SIZE 1
static inline int get_extra_isize(struct inode *inode);
static inline int get_inline_xattr_addrs(struct inode *inode);
#define MAX_INLINE_DATA(inode) (sizeof(__le32) * \
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index c9639ef0e8d5..79370b7fa9d2 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -822,12 +822,13 @@ static int parse_options(struct super_block *sb, char *options)
"set with inline_xattr option");
return -EINVAL;
}
- if (!F2FS_OPTION(sbi).inline_xattr_size ||
- F2FS_OPTION(sbi).inline_xattr_size >=
- DEF_ADDRS_PER_INODE -
- F2FS_TOTAL_EXTRA_ATTR_SIZE -
- DEF_INLINE_RESERVED_SIZE -
- DEF_MIN_INLINE_SIZE) {
+ if (F2FS_OPTION(sbi).inline_xattr_size <
+ sizeof(struct f2fs_xattr_header) / sizeof(__le32) ||
+ F2FS_OPTION(sbi).inline_xattr_size >
+ DEF_ADDRS_PER_INODE -
+ F2FS_TOTAL_EXTRA_ATTR_SIZE / sizeof(__le32) -
+ DEF_INLINE_RESERVED_SIZE -
+ MIN_INLINE_DENTRY_SIZE / sizeof(__le32)) {
f2fs_msg(sb, KERN_ERR,
"inline xattr size is out of range");
return -EINVAL;
diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h
index f70f8ac9c4f4..40fec5f94949 100644
--- a/include/linux/f2fs_fs.h
+++ b/include/linux/f2fs_fs.h
@@ -489,12 +489,12 @@ typedef __le32 f2fs_hash_t;
/*
* space utilization of regular dentry and inline dentry (w/o extra reservation)
- * regular dentry inline dentry
- * bitmap 1 * 27 = 27 1 * 23 = 23
- * reserved 1 * 3 = 3 1 * 7 = 7
- * dentry 11 * 214 = 2354 11 * 182 = 2002
- * filename 8 * 214 = 1712 8 * 182 = 1456
- * total 4096 3488
+ * regular dentry inline dentry (def) inline dentry (min)
+ * bitmap 1 * 27 = 27 1 * 23 = 23 1 * 1 = 1
+ * reserved 1 * 3 = 3 1 * 7 = 7 1 * 1 = 1
+ * dentry 11 * 214 = 2354 11 * 182 = 2002 11 * 2 = 22
+ * filename 8 * 214 = 1712 8 * 182 = 1456 8 * 2 = 16
+ * total 4096 3488 40
*
* Note: there are more reserved space in inline dentry than in regular
* dentry, when converting inline dentry we should handle this carefully.
@@ -506,6 +506,7 @@ typedef __le32 f2fs_hash_t;
#define SIZE_OF_RESERVED (PAGE_SIZE - ((SIZE_OF_DIR_ENTRY + \
F2FS_SLOT_LEN) * \
NR_DENTRY_IN_BLOCK + SIZE_OF_DENTRY_BITMAP))
+#define MIN_INLINE_DENTRY_SIZE 40 /* just include '.' and '..' entries */
/* One directory entry slot representing F2FS_SLOT_LEN-sized file name */
struct f2fs_dir_entry {
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 039/187] cifs: Accept validate negotiate if server return NT_STATUS_NOT_SUPPORTED
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (37 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 038/187] f2fs: fix to check inline_xattr_size boundary correctly Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 040/187] cifs: Fix NULL pointer dereference of devname Greg Kroah-Hartman
` (152 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Namjae Jeon, Steve French, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 969ae8e8d4ee54c99134d3895f2adf96047f5bee ]
Old windows version or Netapp SMB server will return
NT_STATUS_NOT_SUPPORTED since they do not allow or implement
FSCTL_VALIDATE_NEGOTIATE_INFO. The client should accept the response
provided it's properly signed.
See
https://blogs.msdn.microsoft.com/openspecification/2012/06/28/smb3-secure-dialect-negotiation/
and
MS-SMB2 validate negotiate response processing:
https://msdn.microsoft.com/en-us/library/hh880630.aspx
Samba client had already handled it.
https://bugzilla.samba.org/attachment.cgi?id=13285&action=edit
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/smb2pdu.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 3d0db37d64ad..71f32d983384 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -881,8 +881,14 @@ int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon)
rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID,
FSCTL_VALIDATE_NEGOTIATE_INFO, true /* is_fsctl */,
(char *)pneg_inbuf, inbuflen, (char **)&pneg_rsp, &rsplen);
-
- if (rc != 0) {
+ if (rc == -EOPNOTSUPP) {
+ /*
+ * Old Windows versions or Netapp SMB server can return
+ * not supported error. Client should accept it.
+ */
+ cifs_dbg(VFS, "Server does not support validate negotiate\n");
+ return 0;
+ } else if (rc != 0) {
cifs_dbg(VFS, "validate protocol negotiate failed: %d\n", rc);
rc = -EIO;
goto out_free_inbuf;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 040/187] cifs: Fix NULL pointer dereference of devname
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (38 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 039/187] cifs: Accept validate negotiate if server return NT_STATUS_NOT_SUPPORTED Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 041/187] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes Greg Kroah-Hartman
` (151 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yao Liu, Steve French, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 68e2672f8fbd1e04982b8d2798dd318bf2515dd2 ]
There is a NULL pointer dereference of devname in strspn()
The oops looks something like:
CIFS: Attempting to mount (null)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:strspn+0x0/0x50
...
Call Trace:
? cifs_parse_mount_options+0x222/0x1710 [cifs]
? cifs_get_volume_info+0x2f/0x80 [cifs]
cifs_setup_volume_info+0x20/0x190 [cifs]
cifs_get_volume_info+0x50/0x80 [cifs]
cifs_smb3_do_mount+0x59/0x630 [cifs]
? ida_alloc_range+0x34b/0x3d0
cifs_do_mount+0x11/0x20 [cifs]
mount_fs+0x52/0x170
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix this by adding a NULL check on devname in cifs_parse_devname()
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/connect.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index a5ea742654aa..f31339db45fd 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1347,6 +1347,11 @@ cifs_parse_devname(const char *devname, struct smb_vol *vol)
const char *delims = "/\\";
size_t len;
+ if (unlikely(!devname || !*devname)) {
+ cifs_dbg(VFS, "Device name not specified.\n");
+ return -EINVAL;
+ }
+
/* make sure we have a valid UNC double delimiter prefix */
len = strspn(devname, delims);
if (len != 2)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 041/187] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (39 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 040/187] cifs: Fix NULL pointer dereference of devname Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 042/187] netfilter: nf_tables: check the result of dereferencing base_chain->stats Greg Kroah-Hartman
` (150 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Slavomir Kaslev,
Steven Rostedt (VMware),
Linus Torvalds, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ee5e001196d1345b8fee25925ff5f1d67936081e ]
The current implementation of splice() and tee() ignores O_NONBLOCK set
on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for
blocking on pipe arguments. This is inconsistent since splice()-ing
from/to non-pipe file descriptors does take O_NONBLOCK into
consideration.
Fix this by promoting O_NONBLOCK, when set on a pipe, to
SPLICE_F_NONBLOCK.
Some context for how the current implementation of splice() leads to
inconsistent behavior. In the ongoing work[1] to add VM tracing
capability to trace-cmd we stream tracing data over named FIFOs or
vsockets from guests back to the host.
When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on
the input file descriptor and set SPLICE_F_NONBLOCK for the next call to
splice(). If splice() was blocked waiting on data from the input FIFO,
after SIGINT splice() restarts with the same arguments (no
SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no
data is available.
This differs from the splice() behavior when reading from a vsocket or
when we're doing a traditional read()/write() loop (trace-cmd's
--nosplice argument).
With this patch applied we get the same behavior in all situations after
setting O_NONBLOCK which also matches the behavior of doing a
read()/write() loop instead of splice().
This change does have potential of breaking users who don't expect
EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs
that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2].
[1] https://github.com/skaslev/trace-cmd/tree/vsock
[2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425
Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/splice.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/fs/splice.c b/fs/splice.c
index 29e92b506394..7769181aa1a6 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1119,6 +1119,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
if (ipipe == opipe)
return -EINVAL;
+ if ((in->f_flags | out->f_flags) & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
return splice_pipe_to_pipe(ipipe, opipe, len, flags);
}
@@ -1144,6 +1147,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
if (unlikely(ret < 0))
return ret;
+ if (in->f_flags & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
file_start_write(out);
ret = do_splice_from(ipipe, out, &offset, len, flags);
file_end_write(out);
@@ -1168,6 +1174,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
offset = in->f_pos;
}
+ if (out->f_flags & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
pipe_lock(opipe);
ret = wait_for_space(opipe, flags);
if (!ret)
@@ -1717,6 +1726,9 @@ static long do_tee(struct file *in, struct file *out, size_t len,
* copying the data.
*/
if (ipipe && opipe && ipipe != opipe) {
+ if ((in->f_flags | out->f_flags) & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
/*
* Keep going, unless we encounter an error. The ipipe/opipe
* ordering doesn't really matter.
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 042/187] netfilter: nf_tables: check the result of dereferencing base_chain->stats
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (40 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 041/187] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 043/187] netfilter: conntrack: tcp: only close if RST matches exact sequence Greg Kroah-Hartman
` (149 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Zhang Yu, Li RongQing,
Pablo Neira Ayuso, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a9f5e78c403d2d62ade4f4c85040efc85f4049b8 ]
Check the result of dereferencing base_chain->stats, instead of result
of this_cpu_ptr with NULL.
base_chain->stats maybe be changed to NULL when a chain is updated and a
new NULL counter can be attached.
And we do not need to check returning of this_cpu_ptr since
base_chain->stats is from percpu allocator if it is non-NULL,
this_cpu_ptr returns a valid value.
And fix two sparse error by replacing rcu_access_pointer and
rcu_dereference with READ_ONCE under rcu_read_lock.
Thanks for Eric's help to finish this patch.
Fixes: 009240940e84c1 ("netfilter: nf_tables: don't assume chain stats are set when jumplabel is set")
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_tables_core.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/nf_tables_core.c b/net/netfilter/nf_tables_core.c
index 60f258f2c707..a3850414dba2 100644
--- a/net/netfilter/nf_tables_core.c
+++ b/net/netfilter/nf_tables_core.c
@@ -98,21 +98,23 @@ static noinline void nft_update_chain_stats(const struct nft_chain *chain,
const struct nft_pktinfo *pkt)
{
struct nft_base_chain *base_chain;
+ struct nft_stats __percpu *pstats;
struct nft_stats *stats;
base_chain = nft_base_chain(chain);
- if (!rcu_access_pointer(base_chain->stats))
- return;
- local_bh_disable();
- stats = this_cpu_ptr(rcu_dereference(base_chain->stats));
- if (stats) {
+ rcu_read_lock();
+ pstats = READ_ONCE(base_chain->stats);
+ if (pstats) {
+ local_bh_disable();
+ stats = this_cpu_ptr(pstats);
u64_stats_update_begin(&stats->syncp);
stats->pkts++;
stats->bytes += pkt->skb->len;
u64_stats_update_end(&stats->syncp);
+ local_bh_enable();
}
- local_bh_enable();
+ rcu_read_unlock();
}
struct nft_jumpstack {
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 043/187] netfilter: conntrack: tcp: only close if RST matches exact sequence
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (41 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 042/187] netfilter: nf_tables: check the result of dereferencing base_chain->stats Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 044/187] jbd2: fix invalid descriptor block checksum Greg Kroah-Hartman
` (148 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jozsef Kadlecsik, Florian Westphal,
Pablo Neira Ayuso, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit be0502a3f2e94211a8809a09ecbc3a017189b8fb ]
TCP resets cause instant transition from established to closed state
provided the reset is in-window. Endpoints that implement RFC 5961
require resets to match the next expected sequence number.
RST segments that are in-window (but that do not match RCV.NXT) are
ignored, and a "challenge ACK" is sent back.
Main problem for conntrack is that its a middlebox, i.e. whereas an end
host might have ACK'd SEQ (and would thus accept an RST with this
sequence number), conntrack might not have seen this ACK (yet).
Therefore we can't simply flag RSTs with non-exact match as invalid.
This updates RST processing as follows:
1. If the connection is in a state other than ESTABLISHED, nothing is
changed, RST is subject to normal in-window check.
2. If the RSTs sequence number either matches exactly RCV.NXT,
connection state moves to CLOSE.
3. The same applies if the RST sequence number aligns with a previous
packet in the same direction.
In all other cases, the connection remains in ESTABLISHED state.
If the normal-in-window check passes, the timeout will be lowered
to that of CLOSE.
If the peer sends a challenge ack, connection timeout will be reset.
If the challenge ACK triggers another RST (RST was valid after all),
this 2nd RST will match expected sequence and conntrack state changes to
CLOSE.
If no challenge ACK is received, the connection will time out after
CLOSE seconds (10 seconds by default), just like without this patch.
Packetdrill test case:
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 win 64240 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
// Receive a segment.
0.210 < P. 1:1001(1000) ack 1 win 46
0.210 > . 1:1(0) ack 1001
// Application writes 1000 bytes.
0.250 write(4, ..., 1000) = 1000
0.250 > P. 1:1001(1000) ack 1001
// First reset, old sequence. Conntrack (correctly) considers this
// invalid due to failed window validation (regardless of this patch).
0.260 < R 2:2(0) ack 1001 win 260
// 2nd reset, but too far ahead sequence. Same: correctly handled
// as invalid.
0.270 < R 99990001:99990001(0) ack 1001 win 260
// in-window, but not exact sequence.
// Current Linux kernels might reply with a challenge ack, and do not
// remove connection.
// Without this patch, conntrack state moves to CLOSE.
// With patch, timeout is lowered like CLOSE, but connection stays
// in ESTABLISHED state.
0.280 < R 1010:1010(0) ack 1001 win 260
// Expect challenge ACK
0.281 > . 1001:1001(0) ack 1001 win 501
// With or without this patch, RST will cause connection
// to move to CLOSE (sequence number matches)
// 0.282 < R 1001:1001(0) ack 1001 win 260
// ACK
0.300 < . 1001:1001(0) ack 1001 win 257
// more data could be exchanged here, connection
// is still established
// Client closes the connection.
0.610 < F. 1001:1001(0) ack 1001 win 260
0.650 > . 1001:1001(0) ack 1002
// Close the connection without reading outstanding data
0.700 close(4) = 0
// so one more reset. Will be deemed acceptable with patch as well:
// connection is already closing.
0.701 > R. 1001:1001(0) ack 1002 win 501
// End packetdrill test case.
With patch, this generates following conntrack events:
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 120 FIN_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 60 CLOSE_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
Without patch, first RST moves connection to close, whereas socket state
does not change until FIN is received.
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_conntrack_proto_tcp.c | 50 ++++++++++++++++++++------
1 file changed, 40 insertions(+), 10 deletions(-)
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 247b89784a6f..842f3f86fb2e 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -769,6 +769,12 @@ static int tcp_error(struct net *net, struct nf_conn *tmpl,
return NF_ACCEPT;
}
+static bool nf_conntrack_tcp_established(const struct nf_conn *ct)
+{
+ return ct->proto.tcp.state == TCP_CONNTRACK_ESTABLISHED &&
+ test_bit(IPS_ASSURED_BIT, &ct->status);
+}
+
/* Returns verdict for packet, or -1 for invalid. */
static int tcp_packet(struct nf_conn *ct,
const struct sk_buff *skb,
@@ -963,16 +969,38 @@ static int tcp_packet(struct nf_conn *ct,
new_state = TCP_CONNTRACK_ESTABLISHED;
break;
case TCP_CONNTRACK_CLOSE:
- if (index == TCP_RST_SET
- && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET)
- && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) {
- /* Invalid RST */
- spin_unlock_bh(&ct->lock);
- nf_ct_l4proto_log_invalid(skb, ct, "invalid rst");
- return -NF_ACCEPT;
+ if (index != TCP_RST_SET)
+ break;
+
+ if (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET) {
+ u32 seq = ntohl(th->seq);
+
+ if (before(seq, ct->proto.tcp.seen[!dir].td_maxack)) {
+ /* Invalid RST */
+ spin_unlock_bh(&ct->lock);
+ nf_ct_l4proto_log_invalid(skb, ct, "invalid rst");
+ return -NF_ACCEPT;
+ }
+
+ if (!nf_conntrack_tcp_established(ct) ||
+ seq == ct->proto.tcp.seen[!dir].td_maxack)
+ break;
+
+ /* Check if rst is part of train, such as
+ * foo:80 > bar:4379: P, 235946583:235946602(19) ack 42
+ * foo:80 > bar:4379: R, 235946602:235946602(0) ack 42
+ */
+ if (ct->proto.tcp.last_index == TCP_ACK_SET &&
+ ct->proto.tcp.last_dir == dir &&
+ seq == ct->proto.tcp.last_end)
+ break;
+
+ /* ... RST sequence number doesn't match exactly, keep
+ * established state to allow a possible challenge ACK.
+ */
+ new_state = old_state;
}
- if (index == TCP_RST_SET
- && ((test_bit(IPS_SEEN_REPLY_BIT, &ct->status)
+ if (((test_bit(IPS_SEEN_REPLY_BIT, &ct->status)
&& ct->proto.tcp.last_index == TCP_SYN_SET)
|| (!test_bit(IPS_ASSURED_BIT, &ct->status)
&& ct->proto.tcp.last_index == TCP_ACK_SET))
@@ -988,7 +1016,7 @@ static int tcp_packet(struct nf_conn *ct,
* segments we ignored. */
goto in_window;
}
- /* Just fall through */
+ break;
default:
/* Keep compilers happy. */
break;
@@ -1023,6 +1051,8 @@ static int tcp_packet(struct nf_conn *ct,
if (ct->proto.tcp.retrans >= tn->tcp_max_retrans &&
timeouts[new_state] > timeouts[TCP_CONNTRACK_RETRANS])
timeout = timeouts[TCP_CONNTRACK_RETRANS];
+ else if (unlikely(index == TCP_RST_SET))
+ timeout = timeouts[TCP_CONNTRACK_CLOSE];
else if ((ct->proto.tcp.seen[0].flags | ct->proto.tcp.seen[1].flags) &
IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
timeouts[new_state] > timeouts[TCP_CONNTRACK_UNACK])
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 044/187] jbd2: fix invalid descriptor block checksum
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (42 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 043/187] netfilter: conntrack: tcp: only close if RST matches exact sequence Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 045/187] fs: fix guard_bio_eod to check for real EOD errors Greg Kroah-Hartman
` (147 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, luojiajun, Theodore Tso, Jan Kara,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6e876c3dd205d30b0db6850e97a03d75457df007 ]
In jbd2_journal_commit_transaction(), if we are in abort mode,
we may flush the buffer without setting descriptor block checksum
by goto start_journal_io. Then fs is mounted,
jbd2_descriptor_block_csum_verify() failed.
[ 271.379811] EXT4-fs (vdd): shut down requested (2)
[ 271.381827] Aborting journal on device vdd-8.
[ 271.597136] JBD2: Invalid checksum recovering block 22199 in log
[ 271.598023] JBD2: recovery failed
[ 271.598484] EXT4-fs (vdd): error loading journal
Fix this problem by keep setting descriptor block checksum if the
descriptor buffer is not NULL.
This checksum problem can be reproduced by xfstests generic/388.
Signed-off-by: luojiajun <luojiajun3@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jbd2/commit.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 150cc030b4d7..65ea0355a4f6 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -691,9 +691,11 @@ void jbd2_journal_commit_transaction(journal_t *journal)
the last tag we set up. */
tag->t_flags |= cpu_to_be16(JBD2_FLAG_LAST_TAG);
-
- jbd2_descriptor_block_csum_set(journal, descriptor);
start_journal_io:
+ if (descriptor)
+ jbd2_descriptor_block_csum_set(journal,
+ descriptor);
+
for (i = 0; i < bufs; i++) {
struct buffer_head *bh = wbuf[i];
/*
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 045/187] fs: fix guard_bio_eod to check for real EOD errors
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (43 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 044/187] jbd2: fix invalid descriptor block checksum Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 046/187] tools lib traceevent: Fix buffer overflow in arg_eval Greg Kroah-Hartman
` (146 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ming Lei, Carlos Maiolino,
Jens Axboe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit dce30ca9e3b676fb288c33c1f4725a0621361185 ]
guard_bio_eod() can truncate a segment in bio to allow it to do IO on
odd last sectors of a device.
It already checks if the IO starts past EOD, but it does not consider
the possibility of an IO request starting within device boundaries can
contain more than one segment past EOD.
In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will
underflow bvec->bv_len.
Fix this by checking if truncated_bytes is lower than PAGE_SIZE.
This situation has been found on filesystems such as isofs and vfat,
which doesn't check the device size before mount, if the device is
smaller than the filesystem itself, a readahead on such filesystem,
which spans EOD, can trigger this situation, leading a call to
zero_user() with a wrong size possibly corrupting memory.
I didn't see any crash, or didn't let the system run long enough to
check if memory corruption will be hit somewhere, but adding
instrumentation to guard_bio_end() to check truncated_bytes size, was
enough to see the error.
The following script can trigger the error.
MNT=/mnt
IMG=./DISK.img
DEV=/dev/loop0
mkfs.vfat $IMG
mount $IMG $MNT
cp -R /etc $MNT &> /dev/null
umount $MNT
losetup -D
losetup --find --show --sizelimit 16247280 $IMG
mount $DEV $MNT
find $MNT -type f -exec cat {} + >/dev/null
Kudos to Eric Sandeen for coming up with the reproducer above
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/buffer.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/buffer.c b/fs/buffer.c
index c083c4b3c1e7..a550e0d8e965 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -3027,6 +3027,13 @@ void guard_bio_eod(int op, struct bio *bio)
/* Uhhuh. We've got a bio that straddles the device size! */
truncated_bytes = bio->bi_iter.bi_size - (maxsector << 9);
+ /*
+ * The bio contains more than one segment which spans EOD, just return
+ * and let IO layer turn it into an EIO
+ */
+ if (truncated_bytes > bvec->bv_len)
+ return;
+
/* Truncate the bio.. */
bio->bi_iter.bi_size -= truncated_bytes;
bvec->bv_len -= truncated_bytes;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 046/187] tools lib traceevent: Fix buffer overflow in arg_eval
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (44 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 045/187] fs: fix guard_bio_eod to check for real EOD errors Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 047/187] PCI/PME: Fix hotplug/sysfs remove deadlock in pcie_pme_remove() Greg Kroah-Hartman
` (145 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Sartain, Mathias Krause,
Tony Jones, Steven Rostedt (VMware),
Frederic Weisbecker, Arnaldo Carvalho de Melo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7c5b019e3a638a5a290b0ec020f6ca83d2ec2aaa ]
Fix buffer overflow observed when running perf test.
The overflow is when trying to evaluate "1ULL << (64 - 1)" which is
resulting in -9223372036854775808 which overflows the 20 character
buffer.
If is possible this bug has been reported before but I still don't see
any fix checked in:
See: https://www.spinics.net/lists/linux-perf-users/msg07714.html
Reported-by: Michael Sartain <mikesart@fastmail.com>
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/20190228015532.8941-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/traceevent/event-parse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 75de355a63d6..10985d991ed2 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -2416,7 +2416,7 @@ static int arg_num_eval(struct print_arg *arg, long long *val)
static char *arg_eval (struct print_arg *arg)
{
long long val;
- static char buf[20];
+ static char buf[24];
switch (arg->type) {
case PRINT_ATOM:
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 047/187] PCI/PME: Fix hotplug/sysfs remove deadlock in pcie_pme_remove()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (45 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 046/187] tools lib traceevent: Fix buffer overflow in arg_eval Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 048/187] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Greg Kroah-Hartman
` (144 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dongdong Liu, Rafael J. Wysocki,
Bjorn Helgaas, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 95c80bc6952b6a5badc7b702d23e5bf14d251e7c ]
Dongdong reported a deadlock triggered by a hotplug event during a sysfs
"remove" operation:
pciehp 0000:00:0c.0:pcie004: Slot(0-1): Link Up
# echo 1 > 0000:00:0c.0/remove
PME and hotplug share an MSI/MSI-X vector. The sysfs "remove" side is:
remove_store
pci_stop_and_remove_bus_device_locked
pci_lock_rescan_remove
pci_stop_and_remove_bus_device
...
pcie_pme_remove
pcie_pme_suspend
synchronize_irq # wait for hotplug IRQ handler
pci_unlock_rescan_remove
The hotplug side is:
pciehp_ist
pciehp_handle_presence_or_link_change
pciehp_configure_device
pci_lock_rescan_remove # wait for pci_unlock_rescan_remove()
INFO: task bash:10913 blocked for more than 120 seconds.
# ps -ax |grep D
PID TTY STAT TIME COMMAND
10913 ttyAMA0 Ds+ 0:00 -bash
14022 ? D 0:00 [irq/745-pciehp]
# cat /proc/14022/stack
__switch_to+0x94/0xd8
pci_lock_rescan_remove+0x20/0x28
pciehp_configure_device+0x30/0x140
pciehp_handle_presence_or_link_change+0x324/0x458
pciehp_ist+0x1dc/0x1e0
# cat /proc/10913/stack
__switch_to+0x94/0xd8
synchronize_irq+0x8c/0xc0
pcie_pme_suspend+0xa4/0x118
pcie_pme_remove+0x20/0x40
pcie_port_remove_service+0x3c/0x58
...
pcie_port_device_remove+0x2c/0x48
pcie_portdrv_remove+0x68/0x78
pci_device_remove+0x48/0x120
...
pci_stop_bus_device+0x84/0xc0
pci_stop_and_remove_bus_device_locked+0x24/0x40
remove_store+0xa4/0xb8
dev_attr_store+0x44/0x60
sysfs_kf_write+0x58/0x80
It is incorrect to call pcie_pme_suspend() from pcie_pme_remove() for two
reasons.
First, pcie_pme_suspend() calls synchronize_irq(), which will wait for the
native hotplug interrupt handler as well as for the PME one, because they
share one IRQ (as per the spec). That may deadlock if hotplug is signaled
while pcie_pme_remove() is running and the latter calls
pci_lock_rescan_remove() before the former.
Second, if pcie_pme_suspend() figures out that wakeup needs to be enabled
for the port, it will return without disabling the interrupt as expected by
pcie_pme_remove() which was overlooked by commit c7b5a4e6e8fb ("PCI / PM:
Fix native PME handling during system suspend/resume").
To fix that, rework pcie_pme_remove() to disable the PME interrupt, clear
its status and prevent the PME worker function from re-enabling it before
calling free_irq() on it, which should be sufficient.
Fixes: c7b5a4e6e8fb ("PCI / PM: Fix native PME handling during system suspend/resume")
Link: https://lore.kernel.org/linux-pci/c7697e7c-e1af-13e4-8491-0a3996e6ab5d@huawei.com
Reported-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[bhelgaas: add URL and deadlock details from Dongdong]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/pcie/pme.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 3ed67676ea2a..e85c5a8206c4 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -363,6 +363,16 @@ static bool pcie_pme_check_wakeup(struct pci_bus *bus)
return false;
}
+static void pcie_pme_disable_interrupt(struct pci_dev *port,
+ struct pcie_pme_service_data *data)
+{
+ spin_lock_irq(&data->lock);
+ pcie_pme_interrupt_enable(port, false);
+ pcie_clear_root_pme_status(port);
+ data->noirq = true;
+ spin_unlock_irq(&data->lock);
+}
+
/**
* pcie_pme_suspend - Suspend PCIe PME service device.
* @srv: PCIe service device to suspend.
@@ -387,11 +397,7 @@ static int pcie_pme_suspend(struct pcie_device *srv)
return 0;
}
- spin_lock_irq(&data->lock);
- pcie_pme_interrupt_enable(port, false);
- pcie_clear_root_pme_status(port);
- data->noirq = true;
- spin_unlock_irq(&data->lock);
+ pcie_pme_disable_interrupt(port, data);
synchronize_irq(srv->irq);
@@ -427,9 +433,11 @@ static int pcie_pme_resume(struct pcie_device *srv)
*/
static void pcie_pme_remove(struct pcie_device *srv)
{
- pcie_pme_suspend(srv);
+ struct pcie_pme_service_data *data = get_service_data(srv);
+
+ pcie_pme_disable_interrupt(srv->port, data);
free_irq(srv->irq, srv);
- kfree(get_service_data(srv));
+ kfree(data);
}
static struct pcie_port_service_driver pcie_pme_driver = {
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 048/187] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (46 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 047/187] PCI/PME: Fix hotplug/sysfs remove deadlock in pcie_pme_remove() Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 049/187] mt76: fix a leaked reference by adding a missing of_node_put Greg Kroah-Hartman
` (143 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexei Avshalom Lazar, Maya Erez,
Kalle Valo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit de77a53c2d1e8fb3621e63e8e1f0f0c9a1a99ff7 ]
ies1 or ies2 might be null when code inside
_wil_cfg80211_merge_extra_ies access them.
Add explicit check for null and make sure ies1/ies2 are not
accessed in such a case.
spos might be null and be accessed inside
_wil_cfg80211_merge_extra_ies.
Add explicit check for null in the while condition statement
and make sure spos is not accessed in such a case.
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index f79c337105cb..2daf33342b23 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1420,6 +1420,12 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
u8 *buf, *dpos;
const u8 *spos;
+ if (!ies1)
+ ies1_len = 0;
+
+ if (!ies2)
+ ies2_len = 0;
+
if (ies1_len == 0 && ies2_len == 0) {
*merged_ies = NULL;
*merged_len = 0;
@@ -1429,17 +1435,19 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
buf = kmalloc(ies1_len + ies2_len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- memcpy(buf, ies1, ies1_len);
+ if (ies1)
+ memcpy(buf, ies1, ies1_len);
dpos = buf + ies1_len;
spos = ies2;
- while (spos + 1 < ies2 + ies2_len) {
+ while (spos && (spos + 1 < ies2 + ies2_len)) {
/* IE tag at offset 0, length at offset 1 */
u16 ielen = 2 + spos[1];
if (spos + ielen > ies2 + ies2_len)
break;
if (spos[0] == WLAN_EID_VENDOR_SPECIFIC &&
- !_wil_cfg80211_find_ie(ies1, ies1_len, spos, ielen)) {
+ (!ies1 || !_wil_cfg80211_find_ie(ies1, ies1_len,
+ spos, ielen))) {
memcpy(dpos, spos, ielen);
dpos += ielen;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 049/187] mt76: fix a leaked reference by adding a missing of_node_put
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (47 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 048/187] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 050/187] crypto: crypto4xx - add missing of_node_put after of_device_is_available Greg Kroah-Hartman
` (142 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wen Yang, Felix Fietkau,
Lorenzo Bianconi, Kalle Valo, David S. Miller, Matthias Brugger,
linux-wireless, netdev, linux-arm-kernel, linux-mediatek,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 34e022d8b780a03902d82fb3997ba7c7b1f40c81 ]
The call to of_find_node_by_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/net/wireless/mediatek/mt76/eeprom.c:58:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:61:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:67:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:70:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:72:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/eeprom.c | 24 ++++++++++++++-------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/eeprom.c b/drivers/net/wireless/mediatek/mt76/eeprom.c
index 530e5593765c..a1529920d877 100644
--- a/drivers/net/wireless/mediatek/mt76/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/eeprom.c
@@ -54,22 +54,30 @@ mt76_get_of_eeprom(struct mt76_dev *dev, int len)
part = np->name;
mtd = get_mtd_device_nm(part);
- if (IS_ERR(mtd))
- return PTR_ERR(mtd);
+ if (IS_ERR(mtd)) {
+ ret = PTR_ERR(mtd);
+ goto out_put_node;
+ }
- if (size <= sizeof(*list))
- return -EINVAL;
+ if (size <= sizeof(*list)) {
+ ret = -EINVAL;
+ goto out_put_node;
+ }
offset = be32_to_cpup(list);
ret = mtd_read(mtd, offset, len, &retlen, dev->eeprom.data);
put_mtd_device(mtd);
if (ret)
- return ret;
+ goto out_put_node;
- if (retlen < len)
- return -EINVAL;
+ if (retlen < len) {
+ ret = -EINVAL;
+ goto out_put_node;
+ }
- return 0;
+out_put_node:
+ of_node_put(np);
+ return ret;
#else
return -ENOENT;
#endif
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 050/187] crypto: crypto4xx - add missing of_node_put after of_device_is_available
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (48 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 049/187] mt76: fix a leaked reference by adding a missing of_node_put Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 051/187] crypto: cavium/zip - fix collision with generic cra_driver_name Greg Kroah-Hartman
` (141 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Julia Lawall, Herbert Xu, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8c2b43d2d85b48a97d2f8279278a4aac5b45f925 ]
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: 5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/amcc/crypto4xx_trng.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/amcc/crypto4xx_trng.c b/drivers/crypto/amcc/crypto4xx_trng.c
index 5e63742b0d22..53ab1f140a26 100644
--- a/drivers/crypto/amcc/crypto4xx_trng.c
+++ b/drivers/crypto/amcc/crypto4xx_trng.c
@@ -80,8 +80,10 @@ void ppc4xx_trng_probe(struct crypto4xx_core_device *core_dev)
/* Find the TRNG device node and map it */
trng = of_find_matching_node(NULL, ppc4xx_trng_match);
- if (!trng || !of_device_is_available(trng))
+ if (!trng || !of_device_is_available(trng)) {
+ of_node_put(trng);
return;
+ }
dev->trng_base = of_iomap(trng, 0);
of_node_put(trng);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 051/187] crypto: cavium/zip - fix collision with generic cra_driver_name
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (49 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 050/187] crypto: crypto4xx - add missing of_node_put after of_device_is_available Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 052/187] usb: chipidea: Grab the (legacy) USB PHY by phandle first Greg Kroah-Hartman
` (140 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mahipal Challa, Jan Glauber,
Eric Biggers, Herbert Xu, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 41798036430015ad45137db2d4c213cd77fd0251 ]
The cavium/zip implementation of the deflate compression algorithm is
incorrectly being registered under the generic driver name, which
prevents the generic implementation from being registered with the
crypto API when CONFIG_CRYPTO_DEV_CAVIUM_ZIP=y. Similarly the lzs
algorithm (which does not currently have a generic implementation...)
is incorrectly being registered as lzs-generic.
Fix the naming collision by adding a suffix "-cavium" to the
cra_driver_name of the cavium/zip algorithms.
Fixes: 640035a2dc55 ("crypto: zip - Add ThunderX ZIP driver core")
Cc: Mahipal Challa <mahipalreddy2006@gmail.com>
Cc: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/crypto/cavium/zip/zip_main.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/cavium/zip/zip_main.c b/drivers/crypto/cavium/zip/zip_main.c
index be055b9547f6..6183f9128a8a 100644
--- a/drivers/crypto/cavium/zip/zip_main.c
+++ b/drivers/crypto/cavium/zip/zip_main.c
@@ -351,6 +351,7 @@ static struct pci_driver zip_driver = {
static struct crypto_alg zip_comp_deflate = {
.cra_name = "deflate",
+ .cra_driver_name = "deflate-cavium",
.cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
.cra_ctxsize = sizeof(struct zip_kernel_ctx),
.cra_priority = 300,
@@ -365,6 +366,7 @@ static struct crypto_alg zip_comp_deflate = {
static struct crypto_alg zip_comp_lzs = {
.cra_name = "lzs",
+ .cra_driver_name = "lzs-cavium",
.cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
.cra_ctxsize = sizeof(struct zip_kernel_ctx),
.cra_priority = 300,
@@ -384,7 +386,7 @@ static struct scomp_alg zip_scomp_deflate = {
.decompress = zip_scomp_decompress,
.base = {
.cra_name = "deflate",
- .cra_driver_name = "deflate-scomp",
+ .cra_driver_name = "deflate-scomp-cavium",
.cra_module = THIS_MODULE,
.cra_priority = 300,
}
@@ -397,7 +399,7 @@ static struct scomp_alg zip_scomp_lzs = {
.decompress = zip_scomp_decompress,
.base = {
.cra_name = "lzs",
- .cra_driver_name = "lzs-scomp",
+ .cra_driver_name = "lzs-scomp-cavium",
.cra_module = THIS_MODULE,
.cra_priority = 300,
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 052/187] usb: chipidea: Grab the (legacy) USB PHY by phandle first
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (50 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 051/187] crypto: cavium/zip - fix collision with generic cra_driver_name Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 053/187] powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables Greg Kroah-Hartman
` (139 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Kocialkowski, Peter Chen, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 68ef236274793066b9ba3154b16c0acc1c891e5c ]
According to the chipidea driver bindings, the USB PHY is specified via
the "phys" phandle node. However, this only takes effect for USB PHYs
that use the common PHY framework. For legacy USB PHYs, a simple lookup
based on the USB PHY type is done instead.
This does not play out well when more than one USB PHY is registered,
since the first registered PHY matching the type will always be
returned regardless of what the driver was bound to.
Fix this by looking up the PHY based on the "phys" phandle node.
Although generic PHYs are rather matched by their "phys-name" and not
the "phys" phandle directly, there is no helper for similar lookup on
legacy PHYs and it's probably not worth the effort to add it.
When no legacy USB PHY is found by phandle, fallback to grabbing any
registered USB2 PHY. This ensures backward compatibility if some users
were actually relying on this mechanism.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/chipidea/core.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 85fc6db48e44..159b897c5e80 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -935,8 +935,15 @@ static int ci_hdrc_probe(struct platform_device *pdev)
} else if (ci->platdata->usb_phy) {
ci->usb_phy = ci->platdata->usb_phy;
} else {
+ ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
+ 0);
ci->phy = devm_phy_get(dev->parent, "usb-phy");
- ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2);
+
+ /* Fallback to grabbing any registered USB2 PHY */
+ if (IS_ERR(ci->usb_phy) &&
+ PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
+ ci->usb_phy = devm_usb_get_phy(dev->parent,
+ USB_PHY_TYPE_USB2);
/* if both generic PHY and USB PHY layers aren't enabled */
if (PTR_ERR(ci->phy) == -ENOSYS &&
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 053/187] powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (51 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 052/187] usb: chipidea: Grab the (legacy) USB PHY by phandle first Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 054/187] scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c Greg Kroah-Hartman
` (138 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexey Kardashevskiy, David Gibson,
Michael Ellerman, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 11f5acce2fa43b015a8120fa7620fa4efd0a2952 ]
We store 2 multilevel tables in iommu_table - one for the hardware and
one with the corresponding userspace addresses. Before allocating
the tables, the iommu_table_group_ops::get_table_size() hook returns
the combined size of the two and VFIO SPAPR TCE IOMMU driver adjusts
the locked_vm counter correctly. When the table is actually allocated,
the amount of allocated memory is stored in iommu_table::it_allocated_size
and used to decrement the locked_vm counter when we release the memory
used by the table; .get_table_size() and .create_table() calculate it
independently but the result is expected to be the same.
However the allocator does not add the userspace table size to
.it_allocated_size so when we destroy the table because of VFIO PCI
unplug (i.e. VFIO container is gone but the userspace keeps running),
we decrement locked_vm by just a half of size of memory we are
releasing.
To make things worse, since we enabled on-demand allocation of
indirect levels, it_allocated_size contains only the amount of memory
actually allocated at the table creation time which can just be a
fraction. It is not a problem with incrementing locked_vm (as
get_table_size() value is used) but it is with decrementing.
As the result, we leak locked_vm and may not be able to allocate more
IOMMU tables after few iterations of hotplug/unplug.
This sets it_allocated_size in the pnv_pci_ioda2_ops::create_table()
hook to what pnv_pci_ioda2_get_table_size() returns so from now on we
have a single place which calculates the maximum memory a table can
occupy. The original meaning of it_allocated_size is somewhat lost now
though.
We do not ditch it_allocated_size whatsoever here and we do not call
get_table_size() from vfio_iommu_spapr_tce.c when decrementing
locked_vm as we may have multiple IOMMU groups per container and even
though they all are supposed to have the same get_table_size()
implementation, there is a small chance for failure or confusion.
Fixes: 090bad39b237 ("powerpc/powernv: Add indirect levels to it_userspace")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/platforms/powernv/pci-ioda-tce.c | 1 -
arch/powerpc/platforms/powernv/pci-ioda.c | 7 ++++++-
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda-tce.c b/arch/powerpc/platforms/powernv/pci-ioda-tce.c
index 7639b2168755..f5adb6b756f7 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda-tce.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda-tce.c
@@ -313,7 +313,6 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
page_shift);
tbl->it_level_size = 1ULL << (level_shift - 3);
tbl->it_indirect_levels = levels - 1;
- tbl->it_allocated_size = total_allocated;
tbl->it_userspace = uas;
tbl->it_nid = nid;
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index cde710297a4e..326ca6288bb1 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2603,8 +2603,13 @@ static long pnv_pci_ioda2_create_table_userspace(
int num, __u32 page_shift, __u64 window_size, __u32 levels,
struct iommu_table **ptbl)
{
- return pnv_pci_ioda2_create_table(table_group,
+ long ret = pnv_pci_ioda2_create_table(table_group,
num, page_shift, window_size, levels, true, ptbl);
+
+ if (!ret)
+ (*ptbl)->it_allocated_size = pnv_pci_ioda2_get_table_size(
+ page_shift, window_size, levels);
+ return ret;
}
static void pnv_ioda2_take_ownership(struct iommu_table_group *table_group)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 054/187] scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (52 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 053/187] powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 055/187] kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing Greg Kroah-Hartman
` (137 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Benjamin Block, Bart Van Assche,
Martin K. Petersen, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1749ef00f7312679f76d5e9104c5d1e22a829038 ]
We had a test-report where, under memory pressure, adding LUNs to the
systems would fail (the tests add LUNs strictly in sequence):
[ 5525.853432] scsi 0:0:1:1088045124: Direct-Access IBM 2107900 .148 PQ: 0 ANSI: 5
[ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS
[ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43
[ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0
[ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection
[ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off
[ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08
[ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5525.857838] sdk: sdk1
[ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk
[ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds
[ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
[ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
Looking at the code of scsi_alloc_sdev(), and all the calling contexts,
there seems to be no reason to use GFP_ATMOIC here. All the different
call-contexts use a mutex at some point, and nothing in between that
requires no sleeping, as far as I could see. Additionally, the code that
later allocates the block queue for the device (scsi_mq_alloc_queue())
already uses GFP_KERNEL.
There are similar allocations in two other functions:
scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with
GFP_KERNEL.
Here is the contexts for the three functions so far:
scsi_alloc_sdev()
scsi_probe_and_add_lun()
scsi_sequential_lun_scan()
__scsi_scan_target()
scsi_scan_target()
mutex_lock()
scsi_scan_channel()
scsi_scan_host_selected()
mutex_lock()
scsi_report_lun_scan()
__scsi_scan_target()
...
__scsi_add_device()
mutex_lock()
__scsi_scan_target()
...
scsi_report_lun_scan()
...
scsi_get_host_dev()
mutex_lock()
scsi_probe_and_add_lun()
...
scsi_add_lun()
scsi_probe_and_add_lun()
...
So replace all these, and give them a bit of a better chance to succeed,
with more chances of reclaim.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_scan.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 78ca63dfba4a..9a7e3a3bd5ce 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -220,7 +220,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
- GFP_ATOMIC);
+ GFP_KERNEL);
if (!sdev)
goto out;
@@ -796,7 +796,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
*/
sdev->inquiry = kmemdup(inq_result,
max_t(size_t, sdev->inquiry_len, 36),
- GFP_ATOMIC);
+ GFP_KERNEL);
if (sdev->inquiry == NULL)
return SCSI_SCAN_NO_RESPONSE;
@@ -1087,7 +1087,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
if (!sdev)
goto out;
- result = kmalloc(result_len, GFP_ATOMIC |
+ result = kmalloc(result_len, GFP_KERNEL |
((shost->unchecked_isa_dma) ? __GFP_DMA : 0));
if (!result)
goto out_free_sdev;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 055/187] kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (53 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 054/187] scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 056/187] powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc Greg Kroah-Hartman
` (136 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9390dff66a52d1a60c6e517d8fa6cdbdffc83cb1 ]
If include/config/auto.conf.cmd is lost for some reasons, it is not
self-healing, so the top Makefile misses to run syncconfig.
Move include/config/auto.conf.cmd to the target side.
I used a pattern rule instead of a normal rule here although it is
a bit gross.
If the rule were written with a normal rule like this,
include/config/auto.conf \
include/config/auto.conf.cmd \
include/config/tristate.conf: $(KCONFIG_CONFIG)
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
... syncconfig would be executed per target.
Using a pattern rule makes sure that syncconfig is executed just once
because Make assumes the recipe will create all of the targets.
Here is a quote from the GNU Make manual [1]:
"Pattern rules may have more than one target. Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe. If a pattern rule has multiple targets, make knows that
the rule's recipe is responsible for making all of the targets. The
recipe is executed only once to make all the targets. When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: make worries only about giving a recipe and prerequisites
to the file presently in question. However, when this file's recipe is
run, the other targets are marked as having been updated themselves."
[1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Makefile | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index 8de5fab711d8..f1a5d7deaf5f 100644
--- a/Makefile
+++ b/Makefile
@@ -626,12 +626,15 @@ ifeq ($(may-sync-config),1)
-include include/config/auto.conf.cmd
# To avoid any implicit rule to kick in, define an empty command
-$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
+$(KCONFIG_CONFIG): ;
# The actual configuration files used during the build are stored in
# include/generated/ and include/config/. Update them if .config is newer than
# include/config/auto.conf (which mirrors .config).
-include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+#
+# This exploits the 'multi-target pattern rule' trick.
+# The syncconfig should be executed only once to make all the targets.
+%/auto.conf %/auto.conf.cmd %/tristate.conf: $(KCONFIG_CONFIG)
$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
else
# External modules and some install targets need include/generated/autoconf.h
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 056/187] powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (54 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 055/187] kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 057/187] coresight: etm4x: Add support to enable ETMv4.2 Greg Kroah-Hartman
` (135 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nathan Chancellor, Nick Desaulniers,
Michael Ellerman, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e7140639b1de65bba435a6bd772d134901141f86 ]
When building with -Wsometimes-uninitialized, Clang warns:
arch/powerpc/xmon/ppc-dis.c:157:7: warning: variable 'opcode' is used
uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
if (cpu_has_feature(CPU_FTRS_POWER9))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/xmon/ppc-dis.c:167:7: note: uninitialized use occurs here
if (opcode == NULL)
^~~~~~
arch/powerpc/xmon/ppc-dis.c:157:3: note: remove the 'if' if its
condition is always true
if (cpu_has_feature(CPU_FTRS_POWER9))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/xmon/ppc-dis.c:132:38: note: initialize the variable
'opcode' to silence this warning
const struct powerpc_opcode *opcode;
^
= NULL
1 warning generated.
This warning seems to make no sense on the surface because opcode is set
to NULL right below this statement. However, there is a comma instead of
semicolon to end the dialect assignment, meaning that the opcode
assignment only happens in the if statement. Properly terminate that
line so that Clang no longer warns.
Fixes: 5b102782c7f4 ("powerpc/xmon: Enable disassembly files (compilation changes)")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/xmon/ppc-dis.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/xmon/ppc-dis.c b/arch/powerpc/xmon/ppc-dis.c
index 9deea5ee13f6..27f1e6415036 100644
--- a/arch/powerpc/xmon/ppc-dis.c
+++ b/arch/powerpc/xmon/ppc-dis.c
@@ -158,7 +158,7 @@ int print_insn_powerpc (unsigned long insn, unsigned long memaddr)
dialect |= (PPC_OPCODE_POWER5 | PPC_OPCODE_POWER6 | PPC_OPCODE_POWER7
| PPC_OPCODE_POWER8 | PPC_OPCODE_POWER9 | PPC_OPCODE_HTM
| PPC_OPCODE_ALTIVEC | PPC_OPCODE_ALTIVEC2
- | PPC_OPCODE_VSX | PPC_OPCODE_VSX3),
+ | PPC_OPCODE_VSX | PPC_OPCODE_VSX3);
/* Get the major opcode of the insn. */
opcode = NULL;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 057/187] coresight: etm4x: Add support to enable ETMv4.2
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (55 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 056/187] powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 058/187] serial: 8250_pxa: honor the port number from devicetree Greg Kroah-Hartman
` (134 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sai Prakash Ranjan, Suzuki K Poulose,
Mathieu Poirier, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5666dfd1d8a45a167f0d8b4ef47ea7f780b1f24a ]
SDM845 has ETMv4.2 and can use the existing etm4x driver.
But the current etm driver checks only for ETMv4.0 and
errors out for other etm4x versions. This patch adds this
missing support to enable SoC's with ETMv4x to use same
driver by checking only the ETM architecture major version
number.
Without this change, we get below error during etm probe:
/ # dmesg | grep etm
[ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22
[ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22
[ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22
[ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22
[ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22
[ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22
[ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22
[ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22
With this change, etm probe is successful:
/ # dmesg | grep etm
[ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized
[ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized
[ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized
[ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized
[ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized
[ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized
[ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized
[ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 1d94ebec027b..2bce7cf0b0af 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -54,7 +54,8 @@ static void etm4_os_unlock(struct etmv4_drvdata *drvdata)
static bool etm4_arch_supported(u8 arch)
{
- switch (arch) {
+ /* Mask out the minor version number */
+ switch (arch & 0xf0) {
case ETM_ARCH_V4:
break;
default:
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 058/187] serial: 8250_pxa: honor the port number from devicetree
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (56 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 057/187] coresight: etm4x: Add support to enable ETMv4.2 Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 059/187] ARM: 8840/1: use a raw_spinlock_t in unwind Greg Kroah-Hartman
` (133 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Lubomir Rintel, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fe9ed6d2483fda55465f32924fb15bce0fac3fac ]
Like the other OF-enabled drivers, use the port number from the firmware if
the devicetree specifies an alias:
aliases {
...
serial2 = &uart2; /* Should be ttyS2 */
}
This is how the deprecated pxa.c driver behaved, switching to 8250_pxa
messes up the numbering.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/8250/8250_pxa.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index b9bcbe20a2be..c47188860e32 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -113,6 +113,10 @@ static int serial_pxa_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (ret >= 0)
+ uart.port.line = ret;
+
uart.port.type = PORT_XSCALE;
uart.port.iotype = UPIO_MEM32;
uart.port.mapbase = mmres->start;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 059/187] ARM: 8840/1: use a raw_spinlock_t in unwind
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (57 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 058/187] serial: 8250_pxa: honor the port number from devicetree Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 060/187] iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tables Greg Kroah-Hartman
` (132 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sebastian Andrzej Siewior,
Russell King, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 74ffe79ae538283bbf7c155e62339f1e5c87b55a ]
Mostly unwind is done with irqs enabled however SLUB may call it with
irqs disabled while creating a new SLUB cache.
I had system freeze while loading a module which called
kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled
interrupts and then
->new_slab_objects()
->new_slab()
->setup_object()
->setup_object_debug()
->init_tracking()
->set_track()
->save_stack_trace()
->save_stack_trace_tsk()
->walk_stackframe()
->unwind_frame()
->unwind_find_idx()
=>spin_lock_irqsave(&unwind_lock);
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/kernel/unwind.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 0bee233fef9a..314cfb232a63 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -93,7 +93,7 @@ extern const struct unwind_idx __start_unwind_idx[];
static const struct unwind_idx *__origin_unwind_idx;
extern const struct unwind_idx __stop_unwind_idx[];
-static DEFINE_SPINLOCK(unwind_lock);
+static DEFINE_RAW_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);
/* Convert a prel31 symbol to an absolute address */
@@ -201,7 +201,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
/* module unwind tables */
struct unwind_table *table;
- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_for_each_entry(table, &unwind_tables, list) {
if (addr >= table->begin_addr &&
addr < table->end_addr) {
@@ -213,7 +213,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
break;
}
}
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);
}
pr_debug("%s: idx = %p\n", __func__, idx);
@@ -529,9 +529,9 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;
- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);
return tab;
}
@@ -543,9 +543,9 @@ void unwind_table_del(struct unwind_table *tab)
if (!tab)
return;
- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_del(&tab->list);
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);
kfree(tab);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 060/187] iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tables
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (58 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 059/187] ARM: 8840/1: use a raw_spinlock_t in unwind Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 061/187] powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback Greg Kroah-Hartman
` (131 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicolas Boichat, Will Deacon,
Joerg Roedel, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 032ebd8548c9d05e8d2bdc7a7ec2fe29454b0ad0 ]
L1 tables are allocated with __get_dma_pages, and therefore already
ignored by kmemleak.
Without this, the kernel would print this error message on boot,
when the first L1 table is allocated:
[ 2.810533] kmemleak: Trying to color unknown object at 0xffffffd652388000 as Black
[ 2.818190] CPU: 5 PID: 39 Comm: kworker/5:0 Tainted: G S 4.19.16 #8
[ 2.831227] Workqueue: events deferred_probe_work_func
[ 2.836353] Call trace:
...
[ 2.852532] paint_ptr+0xa0/0xa8
[ 2.855750] kmemleak_ignore+0x38/0x6c
[ 2.859490] __arm_v7s_alloc_table+0x168/0x1f4
[ 2.863922] arm_v7s_alloc_pgtable+0x114/0x17c
[ 2.868354] alloc_io_pgtable_ops+0x3c/0x78
...
Fixes: e5fc9753b1a8314 ("iommu/io-pgtable: Add ARMv7 short descriptor support")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iommu/io-pgtable-arm-v7s.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
index fde728ea2900..48d4709a8e93 100644
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -228,7 +228,8 @@ static void *__arm_v7s_alloc_table(int lvl, gfp_t gfp,
if (dma != phys)
goto out_unmap;
}
- kmemleak_ignore(table);
+ if (lvl == 2)
+ kmemleak_ignore(table);
return table;
out_unmap:
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 061/187] powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (59 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 060/187] iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tables Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 062/187] btrfs: qgroup: Make qgroup async transaction commit more aggressive Greg Kroah-Hartman
` (130 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Laurent Dufour, Aneesh Kumar K.V,
Michael Ellerman, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5330367fa300742a97e20e953b1f77f48392faae ]
After we ALIGN up the address we need to make sure we didn't overflow
and resulted in zero address. In that case, we need to make sure that
the returned address is greater than mmap_min_addr.
This fixes selftest va_128TBswitch --run-hugetlb reporting failures when
run as non root user for
mmap(-1, MAP_HUGETLB)
The bug is that a non-root user requesting address -1 will be given address 0
which will then fail, whereas they should have been given something else that
would have succeeded.
We also avoid the first mmap(-1, MAP_HUGETLB) returning NULL address as mmap address
with this change. So we think this is not a security issue, because it only affects
whether we choose an address below mmap_min_addr, not whether we
actually allow that address to be mapped. ie. there are existing capability
checks to prevent a user mapping below mmap_min_addr and those will still be
honoured even without this fix.
Fixes: 484837601d4d ("powerpc/mm: Add radix support for hugetlb")
Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/mm/hugetlbpage-radix.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/hugetlbpage-radix.c b/arch/powerpc/mm/hugetlbpage-radix.c
index 2486bee0f93e..97c7a39ebc00 100644
--- a/arch/powerpc/mm/hugetlbpage-radix.c
+++ b/arch/powerpc/mm/hugetlbpage-radix.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/mm.h>
#include <linux/hugetlb.h>
+#include <linux/security.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
@@ -73,7 +74,7 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
if (addr) {
addr = ALIGN(addr, huge_page_size(h));
vma = find_vma(mm, addr);
- if (high_limit - len >= addr &&
+ if (high_limit - len >= addr && addr >= mmap_min_addr &&
(!vma || addr + len <= vm_start_gap(vma)))
return addr;
}
@@ -83,7 +84,7 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
*/
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
- info.low_limit = PAGE_SIZE;
+ info.low_limit = max(PAGE_SIZE, mmap_min_addr);
info.high_limit = mm->mmap_base + (high_limit - DEFAULT_MAP_WINDOW);
info.align_mask = PAGE_MASK & ~huge_page_mask(h);
info.align_offset = 0;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 062/187] btrfs: qgroup: Make qgroup async transaction commit more aggressive
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (60 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 061/187] powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 063/187] mmc: omap: fix the maximum timeout setting Greg Kroah-Hartman
` (129 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Qu Wenruo, David Sterba, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f5fef4593653dfa2a865c485bb81415de51d5c99 ]
[BUG]
Btrfs qgroup will still hit EDQUOT under the following case:
$ dev=/dev/test/test
$ mnt=/mnt/btrfs
$ umount $mnt &> /dev/null
$ umount $dev &> /dev/null
$ mkfs.btrfs -f $dev
$ mount $dev $mnt -o nospace_cache
$ btrfs subv create $mnt/subv
$ btrfs quota enable $mnt
$ btrfs quota rescan -w $mnt
$ btrfs qgroup limit -e 1G $mnt/subv
$ fallocate -l 900M $mnt/subv/padding
$ sync
$ rm $mnt/subv/padding
# Hit EDQUOT
$ xfs_io -f -c "pwrite 0 512M" $mnt/subv/real_file
[CAUSE]
Since commit a514d63882c3 ("btrfs: qgroup: Commit transaction in advance
to reduce early EDQUOT"), btrfs is not forced to commit transaction to
reclaim more quota space.
Instead, we just check pertrans metadata reservation against some
threshold and try to do asynchronously transaction commit.
However in above case, the pertrans metadata reservation is pretty small
thus it will never trigger asynchronous transaction commit.
[FIX]
Instead of only accounting pertrans metadata reservation, we calculate
how much free space we have, and if there isn't much free space left,
commit transaction asynchronously to try to free some space.
This may slow down the fs when we have less than 32M free qgroup space,
but should reduce a lot of false EDQUOT, so the cost should be
acceptable.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/qgroup.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index e1fcb28ad4cc..e46e83e87600 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -2427,16 +2427,15 @@ out:
/*
* Two limits to commit transaction in advance.
*
- * For RATIO, it will be 1/RATIO of the remaining limit
- * (excluding data and prealloc meta) as threshold.
+ * For RATIO, it will be 1/RATIO of the remaining limit as threshold.
* For SIZE, it will be in byte unit as threshold.
*/
-#define QGROUP_PERTRANS_RATIO 32
-#define QGROUP_PERTRANS_SIZE SZ_32M
+#define QGROUP_FREE_RATIO 32
+#define QGROUP_FREE_SIZE SZ_32M
static bool qgroup_check_limits(struct btrfs_fs_info *fs_info,
const struct btrfs_qgroup *qg, u64 num_bytes)
{
- u64 limit;
+ u64 free;
u64 threshold;
if ((qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_RFER) &&
@@ -2455,20 +2454,21 @@ static bool qgroup_check_limits(struct btrfs_fs_info *fs_info,
*/
if ((qg->lim_flags & (BTRFS_QGROUP_LIMIT_MAX_RFER |
BTRFS_QGROUP_LIMIT_MAX_EXCL))) {
- if (qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_EXCL)
- limit = qg->max_excl;
- else
- limit = qg->max_rfer;
- threshold = (limit - qg->rsv.values[BTRFS_QGROUP_RSV_DATA] -
- qg->rsv.values[BTRFS_QGROUP_RSV_META_PREALLOC]) /
- QGROUP_PERTRANS_RATIO;
- threshold = min_t(u64, threshold, QGROUP_PERTRANS_SIZE);
+ if (qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_EXCL) {
+ free = qg->max_excl - qgroup_rsv_total(qg) - qg->excl;
+ threshold = min_t(u64, qg->max_excl / QGROUP_FREE_RATIO,
+ QGROUP_FREE_SIZE);
+ } else {
+ free = qg->max_rfer - qgroup_rsv_total(qg) - qg->rfer;
+ threshold = min_t(u64, qg->max_rfer / QGROUP_FREE_RATIO,
+ QGROUP_FREE_SIZE);
+ }
/*
* Use transaction_kthread to commit transaction, so we no
* longer need to bother nested transaction nor lock context.
*/
- if (qg->rsv.values[BTRFS_QGROUP_RSV_META_PERTRANS] > threshold)
+ if (free < threshold)
btrfs_commit_transaction_locksafe(fs_info);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 063/187] mmc: omap: fix the maximum timeout setting
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (61 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 062/187] btrfs: qgroup: Make qgroup async transaction commit more aggressive Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 064/187] net: dsa: mv88e6xxx: Add lockdep classes to fix false positive splat Greg Kroah-Hartman
` (128 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Aaro Koskinen, Ulf Hansson, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a6327b5e57fdc679c842588c3be046c0b39cc127 ]
When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy:
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
[ad inf.]
Emulator warnings appear to be valid. The TI document SPRU680 [1]
("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card
(MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253
cycles and "0xff and 0xfe cannot be used".
Fix by using 0xfd as the maximum timeout.
Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on
real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810
(OMAP2420) that MMC works as before.
[1] http://www.ti.com/lit/ug/spru680/spru680.pdf
Fixes: 730c9b7e6630f ("[MMC] Add OMAP MMC host driver")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/host/omap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index c60a7625b1fa..b2873a2432b6 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -920,7 +920,7 @@ static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_reques
reg &= ~(1 << 5);
OMAP_MMC_WRITE(host, SDIO, reg);
/* Set maximum timeout */
- OMAP_MMC_WRITE(host, CTO, 0xff);
+ OMAP_MMC_WRITE(host, CTO, 0xfd);
}
static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 064/187] net: dsa: mv88e6xxx: Add lockdep classes to fix false positive splat
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (62 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 063/187] mmc: omap: fix the maximum timeout setting Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 065/187] e1000e: Fix -Wformat-truncation warnings Greg Kroah-Hartman
` (127 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Russell King, Andrew Lunn,
David S. Miller, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f6d9758b12660484b6639364cc406da92a918c96 ]
The following false positive lockdep splat has been observed.
======================================================
WARNING: possible circular locking dependency detected
4.20.0+ #302 Not tainted
------------------------------------------------------
systemd-udevd/160 is trying to acquire lock:
edea6080 (&chip->reg_lock){+.+.}, at: __setup_irq+0x640/0x704
but task is already holding lock:
edff0340 (&desc->request_mutex){+.+.}, at: __setup_irq+0xa0/0x704
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&desc->request_mutex){+.+.}:
mutex_lock_nested+0x1c/0x24
__setup_irq+0xa0/0x704
request_threaded_irq+0xd0/0x150
mv88e6xxx_probe+0x41c/0x694 [mv88e6xxx]
mdio_probe+0x2c/0x54
really_probe+0x200/0x2c4
driver_probe_device+0x5c/0x174
__driver_attach+0xd8/0xdc
bus_for_each_dev+0x58/0x7c
bus_add_driver+0xe4/0x1f0
driver_register+0x7c/0x110
mdio_driver_register+0x24/0x58
do_one_initcall+0x74/0x2e8
do_init_module+0x60/0x1d0
load_module+0x1968/0x1ff4
sys_finit_module+0x8c/0x98
ret_fast_syscall+0x0/0x28
0xbedf2ae8
-> #0 (&chip->reg_lock){+.+.}:
__mutex_lock+0x50/0x8b8
mutex_lock_nested+0x1c/0x24
__setup_irq+0x640/0x704
request_threaded_irq+0xd0/0x150
mv88e6xxx_g2_irq_setup+0xcc/0x1b4 [mv88e6xxx]
mv88e6xxx_probe+0x44c/0x694 [mv88e6xxx]
mdio_probe+0x2c/0x54
really_probe+0x200/0x2c4
driver_probe_device+0x5c/0x174
__driver_attach+0xd8/0xdc
bus_for_each_dev+0x58/0x7c
bus_add_driver+0xe4/0x1f0
driver_register+0x7c/0x110
mdio_driver_register+0x24/0x58
do_one_initcall+0x74/0x2e8
do_init_module+0x60/0x1d0
load_module+0x1968/0x1ff4
sys_finit_module+0x8c/0x98
ret_fast_syscall+0x0/0x28
0xbedf2ae8
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&desc->request_mutex);
lock(&chip->reg_lock);
lock(&desc->request_mutex);
lock(&chip->reg_lock);
&desc->request_mutex refer to two different mutex. #1 is the GPIO for
the chip interrupt. #2 is the chained interrupt between global 1 and
global 2.
Add lockdep classes to the GPIO interrupt to avoid this.
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/mv88e6xxx/chip.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index c078c791f481..dabe89968a78 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -442,12 +442,20 @@ out_mapping:
static int mv88e6xxx_g1_irq_setup(struct mv88e6xxx_chip *chip)
{
+ static struct lock_class_key lock_key;
+ static struct lock_class_key request_key;
int err;
err = mv88e6xxx_g1_irq_setup_common(chip);
if (err)
return err;
+ /* These lock classes tells lockdep that global 1 irqs are in
+ * a different category than their parent GPIO, so it won't
+ * report false recursion.
+ */
+ irq_set_lockdep_class(chip->irq, &lock_key, &request_key);
+
err = request_threaded_irq(chip->irq, NULL,
mv88e6xxx_g1_irq_thread_fn,
IRQF_ONESHOT,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 065/187] e1000e: Fix -Wformat-truncation warnings
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (63 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 064/187] net: dsa: mv88e6xxx: Add lockdep classes to fix false positive splat Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 066/187] mlxsw: spectrum: Avoid " Greg Kroah-Hartman
` (126 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Fainelli, David S. Miller,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 135e7245479addc6b1f5d031e3d7e2ddb3d2b109 ]
Provide precision hints to snprintf() since we know the destination
buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the
following warnings:
drivers/net/ethernet/intel/e1000e/netdev.c: In function
'e1000_request_msix':
drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
"%s-rx-0", netdev->name);
^
drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
snprintf(adapter->rx_ring->name,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(adapter->rx_ring->name) - 1,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-rx-0", netdev->name);
~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
"%s-tx-0", netdev->name);
^
drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
snprintf(adapter->tx_ring->name,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(adapter->tx_ring->name) - 1,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-tx-0", netdev->name);
~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 3ba0c90e7055..e3945469b5c8 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2106,7 +2106,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
if (strlen(netdev->name) < (IFNAMSIZ - 5))
snprintf(adapter->rx_ring->name,
sizeof(adapter->rx_ring->name) - 1,
- "%s-rx-0", netdev->name);
+ "%.14s-rx-0", netdev->name);
else
memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
err = request_irq(adapter->msix_entries[vector].vector,
@@ -2122,7 +2122,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
if (strlen(netdev->name) < (IFNAMSIZ - 5))
snprintf(adapter->tx_ring->name,
sizeof(adapter->tx_ring->name) - 1,
- "%s-tx-0", netdev->name);
+ "%.14s-tx-0", netdev->name);
else
memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
err = request_irq(adapter->msix_entries[vector].vector,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 066/187] mlxsw: spectrum: Avoid -Wformat-truncation warnings
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (64 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 065/187] e1000e: Fix -Wformat-truncation warnings Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 067/187] platform/x86: ideapad-laptop: Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN Greg Kroah-Hartman
` (125 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Fainelli, Ido Schimmel,
David S. Miller, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ab2c4e2581ad32c28627235ff0ae8c5a5ea6899f ]
Give precision identifiers to the two snprintf() formatting the priority
and TC strings to avoid producing these two warnings:
drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function
'mlxsw_sp_port_get_prio_strings':
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d'
directive output may be truncated writing between 1 and 3 bytes into a
region of size between 0 and 31 [-Wformat-truncation=]
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf'
output between 3 and 36 bytes into a destination of size 32
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mlxsw_sp_port_hw_prio_stats[i].str, prio);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function
'mlxsw_sp_port_get_tc_strings':
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d'
directive output may be truncated writing between 1 and 11 bytes into a
region of size between 0 and 31 [-Wformat-truncation=]
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf'
output between 3 and 44 bytes into a destination of size 32
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mlxsw_sp_port_hw_tc_stats[i].str, tc);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index a12b5710891e..f9bef030ee05 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -1988,7 +1988,7 @@ static void mlxsw_sp_port_get_prio_strings(u8 **p, int prio)
int i;
for (i = 0; i < MLXSW_SP_PORT_HW_PRIO_STATS_LEN; i++) {
- snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
+ snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
mlxsw_sp_port_hw_prio_stats[i].str, prio);
*p += ETH_GSTRING_LEN;
}
@@ -1999,7 +1999,7 @@ static void mlxsw_sp_port_get_tc_strings(u8 **p, int tc)
int i;
for (i = 0; i < MLXSW_SP_PORT_HW_TC_STATS_LEN; i++) {
- snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
+ snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
mlxsw_sp_port_hw_tc_stats[i].str, tc);
*p += ETH_GSTRING_LEN;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 067/187] platform/x86: ideapad-laptop: Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (65 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 066/187] mlxsw: spectrum: Avoid " Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 068/187] platform/mellanox: mlxreg-hotplug: Fix KASAN warning Greg Kroah-Hartman
` (124 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yang Fan, Darren Hart (VMware), Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4d9b2864a415fec39150bc13efc730c7eb88711e ]
Commit ae7c8cba3221 ("platform/x86: ideapad-laptop: add lenovo RESCUER
R720-15IKBN to no_hw_rfkill_list") added
DMI_MATCH(DMI_BOARD_NAME, "80WW")
for Lenovo RESCUER R720-15IKBN.
But DMI_BOARD_NAME does not match 80WW on Lenovo RESCUER R720-15IKBN,
thus cause Wireless LAN still be hard blocked.
On Lenovo RESCUER R720-15IKBN:
~$ cat /sys/class/dmi/id/sys_vendor
LENOVO
~$ cat /sys/class/dmi/id/board_name
Provence-5R3
~$ cat /sys/class/dmi/id/product_name
80WW
~$ cat /sys/class/dmi/id/product_version
Lenovo R720-15IKBN
So on Lenovo RESCUER R720-15IKBN:
DMI_SYS_VENDOR should match "LENOVO",
DMI_BOARD_NAME should match "Provence-5R3",
DMI_PRODUCT_NAME should match "80WW",
DMI_PRODUCT_VERSION should match "Lenovo R720-15IKBN".
Fix it, and in according with other entries in no_hw_rfkill_list,
use DMI_PRODUCT_VERSION instead of DMI_BOARD_NAME.
Fixes: ae7c8cba3221 ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list")
Signed-off-by: Yang Fan <nullptr.cpp@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/ideapad-laptop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index d4f1259ff5a2..62d4b94e2531 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -989,7 +989,7 @@ static const struct dmi_system_id no_hw_rfkill_list[] = {
.ident = "Lenovo RESCUER R720-15IKBN",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_BOARD_NAME, "80WW"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo R720-15IKBN"),
},
},
{
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 068/187] platform/mellanox: mlxreg-hotplug: Fix KASAN warning
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (66 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 067/187] platform/x86: ideapad-laptop: Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 069/187] loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part() Greg Kroah-Hartman
` (123 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vadim Pasternak, Darren Hart (VMware),
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e4c275f77624961b56cce397814d9d770a45ac59 ]
Fix the following KASAN warning produced when booting a 64-bit kernel:
[ 13.334750] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
[ 13.342166] Read of size 8 at addr ffff880235067178 by task kworker/2:1/42
[ 13.342176] CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 4.20.0-rc1+ #106
[ 13.342179] Hardware name: Mellanox Technologies Ltd. MSN2740/Mellanox x86 SFF board, BIOS 5.6.5 06/07/2016
[ 13.342190] Workqueue: events deferred_probe_work_func
[ 13.342194] Call Trace:
[ 13.342206] dump_stack+0xc7/0x15b
[ 13.342214] ? show_regs_print_info+0x5/0x5
[ 13.342220] ? kmsg_dump_rewind_nolock+0x59/0x59
[ 13.342234] ? _raw_write_lock_irqsave+0x100/0x100
[ 13.351593] print_address_description+0x73/0x260
[ 13.351603] kasan_report+0x260/0x380
[ 13.351611] ? find_first_bit+0x19/0x70
[ 13.351619] find_first_bit+0x19/0x70
[ 13.351630] mlxreg_hotplug_work_handler+0x73c/0x920 [mlxreg_hotplug]
[ 13.351639] ? __lock_text_start+0x8/0x8
[ 13.351646] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351656] ? mlxreg_hotplug_remove+0x1e0/0x1e0 [mlxreg_hotplug]
[ 13.351663] ? regmap_volatile+0x40/0xb0
[ 13.351668] ? regcache_write+0x4c/0x90
[ 13.351676] ? mlxplat_mlxcpld_reg_write+0x24/0x30 [mlx_platform]
[ 13.351681] ? _regmap_write+0xea/0x220
[ 13.351688] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351696] ? devm_add_action+0x70/0x70
[ 13.351701] ? mutex_unlock+0x1d/0x40
[ 13.351710] mlxreg_hotplug_probe+0x82e/0x989 [mlxreg_hotplug]
[ 13.351723] ? mlxreg_hotplug_work_handler+0x920/0x920 [mlxreg_hotplug]
[ 13.351731] ? sysfs_do_create_link_sd.isra.2+0xf4/0x190
[ 13.351737] ? sysfs_rename_link_ns+0xf0/0xf0
[ 13.351743] ? devres_close_group+0x2b0/0x2b0
[ 13.351749] ? pinctrl_put+0x20/0x20
[ 13.351755] ? acpi_dev_pm_attach+0x2c/0xd0
[ 13.351763] platform_drv_probe+0x70/0xd0
[ 13.351771] really_probe+0x480/0x6e0
[ 13.351778] ? device_attach+0x10/0x10
[ 13.351784] ? __lock_text_start+0x8/0x8
[ 13.351790] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351797] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351806] ? __driver_attach+0x190/0x190
[ 13.351812] driver_probe_device+0x17d/0x1a0
[ 13.351819] ? __driver_attach+0x190/0x190
[ 13.351825] bus_for_each_drv+0xd6/0x130
[ 13.351831] ? bus_rescan_devices+0x20/0x20
[ 13.351837] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351845] __device_attach+0x18c/0x230
[ 13.351852] ? device_bind_driver+0x70/0x70
[ 13.351859] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351866] bus_probe_device+0xea/0x110
[ 13.351874] deferred_probe_work_func+0x1c9/0x290
[ 13.351882] ? driver_deferred_probe_add+0x1d0/0x1d0
[ 13.351889] ? preempt_notifier_dec+0x20/0x20
[ 13.351897] ? read_word_at_a_time+0xe/0x20
[ 13.351904] ? strscpy+0x151/0x290
[ 13.351912] ? set_work_pool_and_clear_pending+0x9c/0xf0
[ 13.351918] ? __switch_to_asm+0x34/0x70
[ 13.351924] ? __switch_to_asm+0x40/0x70
[ 13.351929] ? __switch_to_asm+0x34/0x70
[ 13.351935] ? __switch_to_asm+0x40/0x70
[ 13.351942] process_one_work+0x5cc/0xa00
[ 13.351952] ? pwq_dec_nr_in_flight+0x1e0/0x1e0
[ 13.351960] ? pci_mmcfg_check_reserved+0x80/0xb8
[ 13.351967] ? run_rebalance_domains+0x250/0x250
[ 13.351980] ? stack_access_ok+0x35/0x80
[ 13.351986] ? deref_stack_reg+0xa1/0xe0
[ 13.351994] ? schedule+0xcd/0x250
[ 13.352000] ? worker_enter_idle+0x2d6/0x330
[ 13.352006] ? __schedule+0xeb0/0xeb0
[ 13.352014] ? fork_usermode_blob+0x130/0x130
[ 13.352019] ? mutex_lock+0xa7/0x100
[ 13.352026] ? _raw_spin_lock_irq+0x98/0xf0
[ 13.352032] ? _raw_read_unlock_irqrestore+0x30/0x30
[ 13.352037] i2c i2c-2: Added multiplexed i2c bus 11
[ 13.352043] worker_thread+0x181/0xa80
[ 13.352052] ? __switch_to_asm+0x34/0x70
[ 13.352058] ? __switch_to_asm+0x40/0x70
[ 13.352064] ? process_one_work+0xa00/0xa00
[ 13.352070] ? __switch_to_asm+0x34/0x70
[ 13.352076] ? __switch_to_asm+0x40/0x70
[ 13.352081] ? __switch_to_asm+0x34/0x70
[ 13.352086] ? __switch_to_asm+0x40/0x70
[ 13.352092] ? __switch_to_asm+0x34/0x70
[ 13.352097] ? __switch_to_asm+0x40/0x70
[ 13.352105] ? __schedule+0x3d6/0xeb0
[ 13.352112] ? migrate_swap_stop+0x470/0x470
[ 13.352119] ? save_stack+0x89/0xb0
[ 13.352127] ? kmem_cache_alloc_trace+0xe5/0x570
[ 13.352132] ? kthread+0x59/0x1d0
[ 13.352138] ? ret_from_fork+0x35/0x40
[ 13.352154] ? __schedule+0xeb0/0xeb0
[ 13.352161] ? remove_wait_queue+0x150/0x150
[ 13.352169] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.352175] ? __lock_text_start+0x8/0x8
[ 13.352183] ? process_one_work+0xa00/0xa00
[ 13.352188] kthread+0x1a4/0x1d0
[ 13.352195] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 13.352202] ret_from_fork+0x35/0x40
[ 13.353879] The buggy address belongs to the page:
[ 13.353885] page:ffffea0008d419c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 13.353890] flags: 0x2ffff8000000000()
[ 13.353897] raw: 02ffff8000000000 ffffea0008d419c8 ffffea0008d419c8 0000000000000000
[ 13.353903] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 13.353905] page dumped because: kasan: bad access detected
[ 13.353908] Memory state around the buggy address:
[ 13.353912] ffff880235067000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 13.353917] ffff880235067080: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04
[ 13.353921] >ffff880235067100: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 f2 f2 f2 f2 04
[ 13.353923] ^
[ 13.353927] ffff880235067180: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 00 00 00 00 00
[ 13.353931] ffff880235067200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 13.353933] ==================================================================
The warning is caused by the below loop:
for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
while "asserted" is declared as 'unsigned'.
The casting of 32-bit unsigned integer pointer to a 64-bit unsigned long
pointer. There are two problems here.
It causes the access of four extra byte, which can corrupt memory
The 32-bit pointer address may not be 64-bit aligned.
The fix changes variable "asserted" to "unsigned long".
Fixes: 1f976f6978bf ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/mellanox/mlxreg-hotplug.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/mellanox/mlxreg-hotplug.c b/drivers/platform/mellanox/mlxreg-hotplug.c
index b6d44550d98c..eca16d00e310 100644
--- a/drivers/platform/mellanox/mlxreg-hotplug.c
+++ b/drivers/platform/mellanox/mlxreg-hotplug.c
@@ -248,7 +248,8 @@ mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv,
struct mlxreg_core_item *item)
{
struct mlxreg_core_data *data;
- u32 asserted, regval, bit;
+ unsigned long asserted;
+ u32 regval, bit;
int ret;
/*
@@ -281,7 +282,7 @@ mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv,
asserted = item->cache ^ regval;
item->cache = regval;
- for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
+ for_each_set_bit(bit, &asserted, 8) {
data = item->data + bit;
if (regval & BIT(bit)) {
if (item->inversed)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 069/187] loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (67 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 068/187] platform/mellanox: mlxreg-hotplug: Fix KASAN warning Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 070/187] IB/mlx4: Increase the timeout for CM cache Greg Kroah-Hartman
` (122 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dongli Zhang, Jan Kara, Jens Axboe,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 758a58d0bc67457f1215321a536226654a830eeb ]
Commit 0da03cab87e6
("loop: Fix deadlock when calling blkdev_reread_part()") moves
blkdev_reread_part() out of the loop_ctl_mutex. However,
GENHD_FL_NO_PART_SCAN is set before __blkdev_reread_part(). As a result,
__blkdev_reread_part() will fail the check of GENHD_FL_NO_PART_SCAN and
will not rescan the loop device to delete all partitions.
Below are steps to reproduce the issue:
step1 # dd if=/dev/zero of=tmp.raw bs=1M count=100
step2 # losetup -P /dev/loop0 tmp.raw
step3 # parted /dev/loop0 mklabel gpt
step4 # parted -a none -s /dev/loop0 mkpart primary 64s 1
step5 # losetup -d /dev/loop0
Step5 will not be able to delete /dev/loop0p1 (introduced by step4) and
there is below kernel warning message:
[ 464.414043] __loop_clr_fd: partition scan of loop0 failed (rc=-22)
This patch sets GENHD_FL_NO_PART_SCAN after blkdev_reread_part().
Fixes: 0da03cab87e6 ("loop: Fix deadlock when calling blkdev_reread_part()")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/loop.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 0c5aeab4d23a..a63da9e07341 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1090,16 +1090,12 @@ static int __loop_clr_fd(struct loop_device *lo, bool release)
kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
}
mapping_set_gfp_mask(filp->f_mapping, gfp);
- lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
blk_mq_unfreeze_queue(lo->lo_queue);
partscan = lo->lo_flags & LO_FLAGS_PARTSCAN && bdev;
lo_number = lo->lo_number;
- lo->lo_flags = 0;
- if (!part_shift)
- lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
loop_unprepare_queue(lo);
out_unlock:
mutex_unlock(&loop_ctl_mutex);
@@ -1121,6 +1117,23 @@ out_unlock:
/* Device is gone, no point in returning error */
err = 0;
}
+
+ /*
+ * lo->lo_state is set to Lo_unbound here after above partscan has
+ * finished.
+ *
+ * There cannot be anybody else entering __loop_clr_fd() as
+ * lo->lo_backing_file is already cleared and Lo_rundown state
+ * protects us from all the other places trying to change the 'lo'
+ * device.
+ */
+ mutex_lock(&loop_ctl_mutex);
+ lo->lo_flags = 0;
+ if (!part_shift)
+ lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
+ lo->lo_state = Lo_unbound;
+ mutex_unlock(&loop_ctl_mutex);
+
/*
* Need not hold loop_ctl_mutex to fput backing file.
* Calling fput holding loop_ctl_mutex triggers a circular
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 070/187] IB/mlx4: Increase the timeout for CM cache
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (68 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 069/187] loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part() Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 071/187] clk: fractional-divider: check parent rate only if flag is set Greg Kroah-Hartman
` (121 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Håkon Bugge, Jack Morgenstein,
Jason Gunthorpe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2612d723aadcf8281f9bf8305657129bd9f3cd57 ]
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.
Following the RDMA Connection Manager (CM) protocol, it is clear when
an entry has to evicted form the cache. But life is not perfect,
remote peers may die or be rebooted. Hence, it's a timeout to wipe out
a cache entry, when the PF driver assumes the remote peer has gone.
During workloads where a high number of QPs are destroyed concurrently,
excessive amount of CM DREQ retries has been observed
The problem can be demonstrated in a bare-metal environment, where two
nodes have instantiated 8 VFs each. This using dual ported HCAs, so we
have 16 vPorts per physical server.
64 processes are associated with each vPort and creates and destroys
one QP for each of the remote 64 processes. That is, 1024 QPs per
vPort, all in all 16K QPs. The QPs are created/destroyed using the
CM.
When tearing down these 16K QPs, excessive CM DREQ retries (and
duplicates) are observed. With some cat/paste/awk wizardry on the
infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the
nodes:
cm_rx_duplicates:
dreq 2102
cm_rx_msgs:
drep 1989
dreq 6195
rep 3968
req 4224
rtu 4224
cm_tx_msgs:
drep 4093
dreq 27568
rep 4224
req 3968
rtu 3968
cm_tx_retries:
dreq 23469
Note that the active/passive side is equally distributed between the
two nodes.
Enabling pr_debug in cm.c gives tons of:
[171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
1,sl_cm_id: 0xd393089f} is NULL!
By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
tear-down phase of the application is reduced from approximately 90 to
50 seconds. Retries/duplicates are also significantly reduced:
cm_rx_duplicates:
dreq 2460
[]
cm_tx_retries:
dreq 3010
req 47
Increasing the timeout further didn't help, as these duplicates and
retries stems from a too short CMA timeout, which was 20 (~4 seconds)
on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
numbers fell down to about 10 for both of them.
Adjustment of the CMA timeout is not part of this commit.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/mlx4/cm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index fedaf8260105..8c79a480f2b7 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -39,7 +39,7 @@
#include "mlx4_ib.h"
-#define CM_CLEANUP_CACHE_TIMEOUT (5 * HZ)
+#define CM_CLEANUP_CACHE_TIMEOUT (30 * HZ)
struct id_map_entry {
struct rb_node node;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 071/187] clk: fractional-divider: check parent rate only if flag is set
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (69 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 070/187] IB/mlx4: Increase the timeout for CM cache Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 072/187] perf annotate: Fix getting source line failure Greg Kroah-Hartman
` (120 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Katsuhiro Suzuki, Heiko Stuebner,
Stephen Boyd, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d13501a2bedfbea0983cc868d3f1dc692627f60d ]
Custom approximation of fractional-divider may not need parent clock
rate checking. For example Rockchip SoCs work fine using grand parent
clock rate even if target rate is greater than parent.
This patch checks parent clock rate only if CLK_SET_RATE_PARENT flag
is set.
For detailed example, clock tree of Rockchip I2S audio hardware.
- Clock rate of CPLL is 1.2GHz, GPLL is 491.52MHz.
- i2s1_div is integer divider can divide N (N is 1~128).
Input clock is CPLL or GPLL. Initial divider value is N = 1.
Ex) PLL = CPLL, N = 10, i2s1_div output rate is
CPLL / 10 = 1.2GHz / 10 = 120MHz
- i2s1_frac is fractional divider can divide input to x/y, x and
y are 16bit integer.
CPLL --> | selector | ---> i2s1_div -+--> | selector | --> I2S1 MCLK
GPLL --> | | ,--------------' | |
`--> i2s1_frac ---> | |
Clock mux system try to choose suitable one from i2s1_div and
i2s1_frac for master clock (MCLK) of I2S1.
Bad scenario as follows:
- Try to set MCLK to 8.192MHz (32kHz audio replay)
Candidate setting is
- i2s1_div: GPLL / 60 = 8.192MHz
i2s1_div candidate is exactly same as target clock rate, so mux
choose this clock source. i2s1_div output rate is changed
491.52MHz -> 8.192MHz
- After that try to set to 11.2896MHz (44.1kHz audio replay)
Candidate settings are
- i2s1_div : CPLL / 107 = 11.214945MHz
- i2s1_frac: i2s1_div = 8.192MHz
This is because clk_fd_round_rate() thinks target rate
(11.2896MHz) is higher than parent rate (i2s1_div = 8.192MHz)
and returns parent clock rate.
Above is current upstreamed behavior. Clock mux system choose
i2s1_div, but this clock rate is not acceptable for I2S driver, so
users cannot replay audio.
Expected behavior is:
- Try to set master clock to 11.2896MHz (44.1kHz audio replay)
Candidate settings are
- i2s1_div : CPLL / 107 = 11.214945MHz
- i2s1_frac: i2s1_div * 147/6400 = 11.2896MHz
Change i2s1_div to GPLL / 1 = 491.52MHz at same
time.
If apply this commit, clk_fd_round_rate() calls custom approximate
function of Rockchip even if target rate is higher than parent.
Custom function changes both grand parent (i2s1_div) and parent
(i2s_frac) settings at same time. Clock mux system can choose
i2s1_frac and audio works fine.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@kernel.org: Make function into a macro instead]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/clk-fractional-divider.c | 2 +-
include/linux/clk-provider.h | 3 +++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c
index fdf625fb10fa..083daa293280 100644
--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -77,7 +77,7 @@ static long clk_fd_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long m, n;
u64 ret;
- if (!rate || rate >= *parent_rate)
+ if (!rate || (!clk_hw_can_set_rate_parent(hw) && rate >= *parent_rate))
return *parent_rate;
if (fd->approximation)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 08b1aa70a38d..d1b6d2c3ada6 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -782,6 +782,9 @@ unsigned int __clk_get_enable_count(struct clk *clk);
unsigned long clk_hw_get_rate(const struct clk_hw *hw);
unsigned long __clk_get_flags(struct clk *clk);
unsigned long clk_hw_get_flags(const struct clk_hw *hw);
+#define clk_hw_can_set_rate_parent(hw) \
+ (clk_hw_get_flags((hw)) & CLK_SET_RATE_PARENT)
+
bool clk_hw_is_prepared(const struct clk_hw *hw);
bool clk_hw_rate_is_protected(const struct clk_hw *hw);
bool clk_hw_is_enabled(const struct clk_hw *hw);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 072/187] perf annotate: Fix getting source line failure
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (70 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 071/187] clk: fractional-divider: check parent rate only if flag is set Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 073/187] ASoC: qcom: Fix of-node refcount unbalance in qcom_snd_parse_of() Greg Kroah-Hartman
` (119 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wei Li, Jiri Olsa,
Arnaldo Carvalho de Melo, Alexander Shishkin, Jin Yao,
Namhyung Kim, Peter Zijlstra, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 11db1ad4513d6205d2519e1a30ff4cef746e3243 ]
The output of "perf annotate -l --stdio xxx" changed since commit 425859ff0de33
("perf annotate: No need to calculate notes->start twice") removed notes->start
assignment in symbol__calc_lines(). It will get failed in
find_address_in_section() from symbol__tty_annotate() subroutine as the
a2l->addr is wrong. So the annotate summary doesn't report the line number of
source code correctly.
Before fix:
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ cat common_while_1.c
void hotspot_1(void)
{
volatile int i;
for (i = 0; i < 0x10000000; i++);
for (i = 0; i < 0x10000000; i++);
for (i = 0; i < 0x10000000; i++);
}
int main(void)
{
hotspot_1();
return 0;
}
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ gcc common_while_1.c -g -o common_while_1
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf record ./common_while_1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.488 MB perf.data (12498 samples) ]
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf annotate -l -s hotspot_1 --stdio
Sorted summary for file /home/liwei/main_code/hulk_work/hulk/tools/perf/common_while_1
----------------------------------------------
19.30 common_while_1[32]
19.03 common_while_1[4e]
19.01 common_while_1[16]
5.04 common_while_1[13]
4.99 common_while_1[4b]
4.78 common_while_1[2c]
4.77 common_while_1[10]
4.66 common_while_1[2f]
4.59 common_while_1[51]
4.59 common_while_1[35]
4.52 common_while_1[19]
4.20 common_while_1[56]
0.51 common_while_1[48]
Percent | Source code & Disassembly of common_while_1 for cycles:ppp (12480 samples, percent: local period)
-----------------------------------------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
: 00000000000005fa <hotspot_1>:
: hotspot_1():
: void hotspot_1(void)
: {
0.00 : 5fa: push %rbp
0.00 : 5fb: mov %rsp,%rbp
: volatile int i;
:
: for (i = 0; i < 0x10000000; i++);
0.00 : 5fe: movl $0x0,-0x4(%rbp)
0.00 : 605: jmp 610 <hotspot_1+0x16>
0.00 : 607: mov -0x4(%rbp),%eax
common_while_1[10] 4.77 : 60a: add $0x1,%eax
common_while_1[13] 5.04 : 60d: mov %eax,-0x4(%rbp)
common_while_1[16] 19.01 : 610: mov -0x4(%rbp),%eax
common_while_1[19] 4.52 : 613: cmp $0xfffffff,%eax
0.00 : 618: jle 607 <hotspot_1+0xd>
: for (i = 0; i < 0x10000000; i++);
...
After fix:
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf record ./common_while_1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.488 MB perf.data (12500 samples) ]
liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf annotate -l -s hotspot_1 --stdio
Sorted summary for file /home/liwei/main_code/hulk_work/hulk/tools/perf/common_while_1
----------------------------------------------
33.34 common_while_1.c:5
33.34 common_while_1.c:6
33.32 common_while_1.c:7
Percent | Source code & Disassembly of common_while_1 for cycles:ppp (12482 samples, percent: local period)
-----------------------------------------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
: 00000000000005fa <hotspot_1>:
: hotspot_1():
: void hotspot_1(void)
: {
0.00 : 5fa: push %rbp
0.00 : 5fb: mov %rsp,%rbp
: volatile int i;
:
: for (i = 0; i < 0x10000000; i++);
0.00 : 5fe: movl $0x0,-0x4(%rbp)
0.00 : 605: jmp 610 <hotspot_1+0x16>
0.00 : 607: mov -0x4(%rbp),%eax
common_while_1.c:5 4.70 : 60a: add $0x1,%eax
4.89 : 60d: mov %eax,-0x4(%rbp)
common_while_1.c:5 19.03 : 610: mov -0x4(%rbp),%eax
common_while_1.c:5 4.72 : 613: cmp $0xfffffff,%eax
0.00 : 618: jle 607 <hotspot_1+0xd>
: for (i = 0; i < 0x10000000; i++);
0.00 : 61a: movl $0x0,-0x4(%rbp)
0.00 : 621: jmp 62c <hotspot_1+0x32>
0.00 : 623: mov -0x4(%rbp),%eax
common_while_1.c:6 4.54 : 626: add $0x1,%eax
4.73 : 629: mov %eax,-0x4(%rbp)
common_while_1.c:6 19.54 : 62c: mov -0x4(%rbp),%eax
common_while_1.c:6 4.54 : 62f: cmp $0xfffffff,%eax
...
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 425859ff0de33 ("perf annotate: No need to calculate notes->start twice")
Link: http://lkml.kernel.org/r/20190221095716.39529-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/annotate.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index 28cd6a17491b..dfee110b3a58 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -1862,6 +1862,7 @@ int symbol__annotate(struct symbol *sym, struct map *map,
struct annotation_options *options,
struct arch **parch)
{
+ struct annotation *notes = symbol__annotation(sym);
struct annotate_args args = {
.privsize = privsize,
.evsel = evsel,
@@ -1892,6 +1893,7 @@ int symbol__annotate(struct symbol *sym, struct map *map,
args.ms.map = map;
args.ms.sym = sym;
+ notes->start = map__rip_2objdump(map, sym->start);
return symbol__disassemble(sym, &args);
}
@@ -2746,8 +2748,6 @@ int symbol__annotate2(struct symbol *sym, struct map *map, struct perf_evsel *ev
symbol__calc_percent(sym, evsel);
- notes->start = map__rip_2objdump(map, sym->start);
-
annotation__set_offsets(notes, size);
annotation__mark_jump_targets(notes, sym);
annotation__compute_ipc(notes, size);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 073/187] ASoC: qcom: Fix of-node refcount unbalance in qcom_snd_parse_of()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (71 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 072/187] perf annotate: Fix getting source line failure Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 074/187] cpufreq: acpi-cpufreq: Report if CPU doesnt support boost technologies Greg Kroah-Hartman
` (118 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Patrick Lai, Banajit Goswami,
Takashi Iwai, Mark Brown, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 70b773219a32c7b8f3e53e041bc023ad99fd81f4 ]
Although qcom_snd_parse_of() tries to manage the of-node refcount,
there are still a few places that lead to the unblanced refcount in
the error code path. Namely,
- for_each_child_of_node() needs to unreference the iterator node if
aborting the loop in the middle,
- cpu, codec and platform node objects have to be unreferenced at each
iteration,
- platform and codec node objects have to be referred before jumping
to the error handling code that unreference them unconditionally.
This patch tries to address these by moving the assignment of platform
and codec node objects to the beginning of the loop and adding the
of_node_put() calls adequately.
Fixes: c25e295cd77b ("ASoC: qcom: Add support to parse common audio device nodes")
Cc: Patrick Lai <plai@codeaurora.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/qcom/common.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c
index 4715527054e5..5661025e8cec 100644
--- a/sound/soc/qcom/common.c
+++ b/sound/soc/qcom/common.c
@@ -42,6 +42,9 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
link = card->dai_link;
for_each_child_of_node(dev->of_node, np) {
cpu = of_get_child_by_name(np, "cpu");
+ platform = of_get_child_by_name(np, "platform");
+ codec = of_get_child_by_name(np, "codec");
+
if (!cpu) {
dev_err(dev, "Can't find cpu DT node\n");
ret = -EINVAL;
@@ -63,8 +66,6 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
goto err;
}
- platform = of_get_child_by_name(np, "platform");
- codec = of_get_child_by_name(np, "codec");
if (codec && platform) {
link->platform_of_node = of_parse_phandle(platform,
"sound-dai",
@@ -100,10 +101,15 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
link->dpcm_capture = 1;
link->stream_name = link->name;
link++;
+
+ of_node_put(cpu);
+ of_node_put(codec);
+ of_node_put(platform);
}
return 0;
err:
+ of_node_put(np);
of_node_put(cpu);
of_node_put(codec);
of_node_put(platform);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 074/187] cpufreq: acpi-cpufreq: Report if CPU doesnt support boost technologies
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (72 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 073/187] ASoC: qcom: Fix of-node refcount unbalance in qcom_snd_parse_of() Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 075/187] efi: cper: Fix possible out-of-bounds access Greg Kroah-Hartman
` (117 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Erwan Velu, Rafael J. Wysocki, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1222d527f314c86a3b59a522115d62facc5a7965 ]
There is some rare cases where CPB (and possibly IDA) are missing on
processors.
This is the case fixed by commit f7f3dc00f612 ("x86/cpu/AMD: Fix
erratum 1076 (CPB bit)") and following.
In such context, the boost status isn't reported by
/sys/devices/system/cpu/cpufreq/boost.
This commit is about printing a message to report that the CPU
doesn't expose the boost capabilities.
This message could help debugging platforms hit by this phenomena.
Signed-off-by: Erwan Velu <e.velu@criteo.com>
[ rjw: Change the message text somewhat ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/acpi-cpufreq.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index b61f4ec43e06..aca30f45172e 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -911,8 +911,10 @@ static void __init acpi_cpufreq_boost_init(void)
{
int ret;
- if (!(boot_cpu_has(X86_FEATURE_CPB) || boot_cpu_has(X86_FEATURE_IDA)))
+ if (!(boot_cpu_has(X86_FEATURE_CPB) || boot_cpu_has(X86_FEATURE_IDA))) {
+ pr_debug("Boost capabilities not present in the processor\n");
return;
+ }
acpi_cpufreq_driver.set_boost = set_boost;
acpi_cpufreq_driver.boost_enabled = boost_state(0);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 075/187] efi: cper: Fix possible out-of-bounds access
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (73 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 074/187] cpufreq: acpi-cpufreq: Report if CPU doesnt support boost technologies Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 076/187] s390/ism: ignore some errors during deregistration Greg Kroah-Hartman
` (116 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ross Lagerwall, Borislav Petkov,
Tyler Baicar, Rafael J. Wysocki, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 45b14a4ffcc1e0b5caa246638f942cbe7eaea7ad ]
When checking a generic status block, we iterate over all the generic
data blocks. The loop condition only checks that the start of the
generic data block is valid (within estatus->data_length) but not the
whole block. Because the size of data blocks (excluding error data) may
vary depending on the revision and the revision is contained within the
data block, ensure that enough of the current data block is valid before
dereferencing any members otherwise an out-of-bounds access may occur if
estatus->data_length is invalid.
This relies on the fact that struct acpi_hest_generic_data_v300 is a
superset of the earlier version. Also rework the other checks to avoid
potential underflow.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/efi/cper.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index a7902fccdcfa..6090d25dce85 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -546,19 +546,24 @@ EXPORT_SYMBOL_GPL(cper_estatus_check_header);
int cper_estatus_check(const struct acpi_hest_generic_status *estatus)
{
struct acpi_hest_generic_data *gdata;
- unsigned int data_len, gedata_len;
+ unsigned int data_len, record_size;
int rc;
rc = cper_estatus_check_header(estatus);
if (rc)
return rc;
+
data_len = estatus->data_length;
apei_estatus_for_each_section(estatus, gdata) {
- gedata_len = acpi_hest_get_error_length(gdata);
- if (gedata_len > data_len - acpi_hest_get_size(gdata))
+ if (sizeof(struct acpi_hest_generic_data) > data_len)
+ return -EINVAL;
+
+ record_size = acpi_hest_get_record_size(gdata);
+ if (record_size > data_len)
return -EINVAL;
- data_len -= acpi_hest_get_record_size(gdata);
+
+ data_len -= record_size;
}
if (data_len)
return -EINVAL;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 076/187] s390/ism: ignore some errors during deregistration
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (74 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 075/187] efi: cper: Fix possible out-of-bounds access Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 077/187] scsi: megaraid_sas: return error when create DMA pool failed Greg Kroah-Hartman
` (115 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Karsten Graul, Hans Wippel,
Sebastian Ott, Martin Schwidefsky, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0ff06c44efeede4acd068847d3bf8cf894b6c664 ]
Prior to dma unmap/free operations the ism driver tries to ensure
that the memory is no longer accessed by the HW. When errors
during deregistration of memory regions from the HW occur the ism
driver will not unmap/free this memory.
When we receive notification from the hypervisor that a PCI function
has been detached we can no longer access the device and would never
unmap/free these memory regions which led to complaints by the DMA
debug API.
Treat this kind of errors during the deregistration of memory regions
from the HW as success since it is already ensured that the memory
is no longer accessed by HW.
Reported-by: Karsten Graul <kgraul@linux.ibm.com>
Reported-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/net/ism_drv.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c
index 8684bcec8ff4..00cc96341411 100644
--- a/drivers/s390/net/ism_drv.c
+++ b/drivers/s390/net/ism_drv.c
@@ -141,10 +141,13 @@ static int register_ieq(struct ism_dev *ism)
static int unregister_sba(struct ism_dev *ism)
{
+ int ret;
+
if (!ism->sba)
return 0;
- if (ism_cmd_simple(ism, ISM_UNREG_SBA))
+ ret = ism_cmd_simple(ism, ISM_UNREG_SBA);
+ if (ret && ret != ISM_ERROR)
return -EIO;
dma_free_coherent(&ism->pdev->dev, PAGE_SIZE,
@@ -158,10 +161,13 @@ static int unregister_sba(struct ism_dev *ism)
static int unregister_ieq(struct ism_dev *ism)
{
+ int ret;
+
if (!ism->ieq)
return 0;
- if (ism_cmd_simple(ism, ISM_UNREG_IEQ))
+ ret = ism_cmd_simple(ism, ISM_UNREG_IEQ);
+ if (ret && ret != ISM_ERROR)
return -EIO;
dma_free_coherent(&ism->pdev->dev, PAGE_SIZE,
@@ -288,7 +294,7 @@ static int ism_unregister_dmb(struct smcd_dev *smcd, struct smcd_dmb *dmb)
cmd.request.dmb_tok = dmb->dmb_tok;
ret = ism_cmd(ism, &cmd);
- if (ret)
+ if (ret && ret != ISM_ERROR)
goto out;
ism_free_dmb(ism, dmb);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 077/187] scsi: megaraid_sas: return error when create DMA pool failed
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (75 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 076/187] s390/ism: ignore some errors during deregistration Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 078/187] scsi: fcoe: make use of fip_mode enum complete Greg Kroah-Hartman
` (114 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Yan, Sumit Saxena,
Martin K. Petersen, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bcf3b67d16a4c8ffae0aa79de5853435e683945c ]
when create DMA pool for cmd frames failed, we should return -ENOMEM,
instead of 0.
In some case in:
megasas_init_adapter_fusion()
-->megasas_alloc_cmds()
-->megasas_create_frame_pool
create DMA pool failed,
--> megasas_free_cmds() [1]
-->megasas_alloc_cmds_fusion()
failed, then goto fail_alloc_cmds.
-->megasas_free_cmds() [2]
we will call megasas_free_cmds twice, [1] will kfree cmd_list,
[2] will use cmd_list.it will cause a problem:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = ffffffc000f70000
[00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003,
*pmd=0000001fbf894003, *pte=006000006d000707
Internal error: Oops: 96000005 [#1] SMP
Modules linked in:
CPU: 18 PID: 1 Comm: swapper/0 Not tainted
task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000
PC is at megasas_free_cmds+0x30/0x70
LR is at megasas_free_cmds+0x24/0x70
...
Call trace:
[<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70
[<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8
[<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760
[<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8
[<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4
[<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c
[<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430
[<ffffffc00053a92c>] __driver_attach+0xa8/0xb0
[<ffffffc000538178>] bus_for_each_dev+0x74/0xc8
[<ffffffc000539e88>] driver_attach+0x28/0x34
[<ffffffc000539a18>] bus_add_driver+0x16c/0x248
[<ffffffc00053b234>] driver_register+0x6c/0x138
[<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c
[<ffffffc000ce3868>] megasas_init+0xc0/0x1a8
[<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec
[<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284
[<ffffffc0008d90b8>] kernel_init+0x1c/0xe4
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index f6de7526ded5..acb503ea8f0c 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4155,6 +4155,7 @@ int megasas_alloc_cmds(struct megasas_instance *instance)
if (megasas_create_frame_pool(instance)) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Error creating frame DMA pool\n");
megasas_free_cmds(instance);
+ return -ENOMEM;
}
return 0;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 078/187] scsi: fcoe: make use of fip_mode enum complete
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (76 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 077/187] scsi: megaraid_sas: return error when create DMA pool failed Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 079/187] drm/amd/display: Clear stream->mode_changed after commit Greg Kroah-Hartman
` (113 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Golovin, Lukas Bulwahn,
Nick Desaulniers, Nathan Chancellor, Johannes Thumshirn,
Sedat Dilek, Hannes Reinecke, Martin K. Petersen, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8beb90aaf334a6efa3e924339926b5f93a234dbb ]
commit 1917d42d14b7 ("fcoe: use enum for fip_mode") introduces a separate
enum for the fip_mode that shall be used during initialisation handling
until it is passed to fcoe_ctrl_link_up to set the initial fip_state. That
change was incomplete and gcc quietly converted in various places between
the fip_mode and the fip_state enum values with implicit enum conversions,
which fortunately cannot cause any issues in the actual code's execution.
clang however warns about these implicit enum conversions in the scsi
drivers. This commit consolidates the use of the two enums, guided by
clang's enum-conversion warnings.
This commit now completes the use of the fip_mode: It expects and uses
fip_mode in {bnx2fc,fcoe}_interface_create and fcoe_ctlr_init, and it calls
fcoe_ctrl_set_set() with the correct values in fcoe_ctlr_link_up(). It
also breaks the association between FIP_MODE_AUTO and FIP_ST_AUTO to
indicate these two enums are distinct.
Link: https://github.com/ClangBuiltLinux/linux/issues/151
Fixes: 1917d42d14b7 ("fcoe: use enum for fip_mode")
Reported-by: Dmitry Golovin <dima@golovin.in>
Original-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
CC: Lukas Bulwahn <lukas.bulwahn@gmail.com>
CC: Nick Desaulniers <ndesaulniers@google.com>
CC: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 2 +-
drivers/scsi/fcoe/fcoe_ctlr.c | 7 +++++--
drivers/scsi/fcoe/fcoe_transport.c | 2 +-
drivers/scsi/qedf/qedf_main.c | 2 +-
include/scsi/libfcoe.h | 4 ++--
6 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 3f97ec4aac4b..780651c4fc0c 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -1445,7 +1445,7 @@ bind_err:
static struct bnx2fc_interface *
bnx2fc_interface_create(struct bnx2fc_hba *hba,
struct net_device *netdev,
- enum fip_state fip_mode)
+ enum fip_mode fip_mode)
{
struct fcoe_ctlr_device *ctlr_dev;
struct bnx2fc_interface *interface;
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index f46b312d04bc..6768b2e8148a 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -390,7 +390,7 @@ static int fcoe_interface_setup(struct fcoe_interface *fcoe,
* Returns: pointer to a struct fcoe_interface or NULL on error
*/
static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev,
- enum fip_state fip_mode)
+ enum fip_mode fip_mode)
{
struct fcoe_ctlr_device *ctlr_dev;
struct fcoe_ctlr *ctlr;
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 54da3166da8d..7dc4ffa24430 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -147,7 +147,7 @@ static void fcoe_ctlr_map_dest(struct fcoe_ctlr *fip)
* fcoe_ctlr_init() - Initialize the FCoE Controller instance
* @fip: The FCoE controller to initialize
*/
-void fcoe_ctlr_init(struct fcoe_ctlr *fip, enum fip_state mode)
+void fcoe_ctlr_init(struct fcoe_ctlr *fip, enum fip_mode mode)
{
fcoe_ctlr_set_state(fip, FIP_ST_LINK_WAIT);
fip->mode = mode;
@@ -454,7 +454,10 @@ void fcoe_ctlr_link_up(struct fcoe_ctlr *fip)
mutex_unlock(&fip->ctlr_mutex);
fc_linkup(fip->lp);
} else if (fip->state == FIP_ST_LINK_WAIT) {
- fcoe_ctlr_set_state(fip, fip->mode);
+ if (fip->mode == FIP_MODE_NON_FIP)
+ fcoe_ctlr_set_state(fip, FIP_ST_NON_FIP);
+ else
+ fcoe_ctlr_set_state(fip, FIP_ST_AUTO);
switch (fip->mode) {
default:
LIBFCOE_FIP_DBG(fip, "invalid mode %d\n", fip->mode);
diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
index f4909cd206d3..f15d5e1d56b1 100644
--- a/drivers/scsi/fcoe/fcoe_transport.c
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -873,7 +873,7 @@ static int fcoe_transport_create(const char *buffer,
int rc = -ENODEV;
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
- enum fip_state fip_mode = (enum fip_state)(long)kp->arg;
+ enum fip_mode fip_mode = (enum fip_mode)kp->arg;
mutex_lock(&ft_mutex);
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 0a5dd5595dd3..cd61905ca2f5 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -1418,7 +1418,7 @@ static struct libfc_function_template qedf_lport_template = {
static void qedf_fcoe_ctlr_setup(struct qedf_ctx *qedf)
{
- fcoe_ctlr_init(&qedf->ctlr, FIP_ST_AUTO);
+ fcoe_ctlr_init(&qedf->ctlr, FIP_MODE_AUTO);
qedf->ctlr.send = qedf_fip_send;
qedf->ctlr.get_src_addr = qedf_get_src_mac;
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index cb8a273732cf..bb8092fa1e36 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -79,7 +79,7 @@ enum fip_state {
* It must not change after fcoe_ctlr_init() sets it.
*/
enum fip_mode {
- FIP_MODE_AUTO = FIP_ST_AUTO,
+ FIP_MODE_AUTO,
FIP_MODE_NON_FIP,
FIP_MODE_FABRIC,
FIP_MODE_VN2VN,
@@ -250,7 +250,7 @@ struct fcoe_rport {
};
/* FIP API functions */
-void fcoe_ctlr_init(struct fcoe_ctlr *, enum fip_state);
+void fcoe_ctlr_init(struct fcoe_ctlr *, enum fip_mode);
void fcoe_ctlr_destroy(struct fcoe_ctlr *);
void fcoe_ctlr_link_up(struct fcoe_ctlr *);
int fcoe_ctlr_link_down(struct fcoe_ctlr *);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 079/187] drm/amd/display: Clear stream->mode_changed after commit
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (77 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 078/187] scsi: fcoe: make use of fip_mode enum complete Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 080/187] perf test: Fix failure of evsel-tp-sched test on s390 Greg Kroah-Hartman
` (112 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Kazlauskas, Leo Li,
Tony Cheng, Alex Deucher, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d8d2f174bcc2c26c3485c70e0c6fe22b27bce739 ]
[Why]
The stream->mode_changed flag can persist in the following sequence
of atomic commits:
Commit 1:
Enable CRTC0 (mode_changed = true), Enable CRTC1 (mode_changed = true)
Commit 2:
Disable CRTC1 (mode_changed = false)
In this sequence we want to keep the exiting CRTC0 but it's not in the
atomic state for the commit since it hasn't been modified. In this case
the stream->mode_changed flag persists as true and we don't re-program
the planes for the existing stream.
[How]
The flag needs to be cleared and it makes the most sense to do it within
DC after the state has been committed. Nothing following dc_commit_state
should think that the stream's mode has changed.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 9045e6fa0780..bb0cda727605 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -958,6 +958,9 @@ static enum dc_status dc_commit_state_no_check(struct dc *dc, struct dc_state *c
/* pplib is notified if disp_num changed */
dc->hwss.set_bandwidth(dc, context, true);
+ for (i = 0; i < context->stream_count; i++)
+ context->streams[i]->mode_changed = false;
+
dc_release_state(dc->current_state);
dc->current_state = context;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 080/187] perf test: Fix failure of evsel-tp-sched test on s390
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (78 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 079/187] drm/amd/display: Clear stream->mode_changed after commit Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 081/187] mwifiex: dont advertise IBSS features without FW support Greg Kroah-Hartman
` (111 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Richter, Heiko Carstens,
Hendrik Brueckner, Martin Schwidefsky, Arnaldo Carvalho de Melo,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 03d309711d687460d1345de8a0363f45b1c8cd11 ]
Commit 489338a717a0 ("perf tests evsel-tp-sched: Fix bitwise operator")
causes test case 14 "Parse sched tracepoints fields" to fail on s390.
This test succeeds on x86.
In fact this test now fails on all architectures with type char treated
as type unsigned char.
The root cause is the signed-ness of character arrays in the tracepoints
sched_switch for structure members prev_comm and next_comm.
On s390 the output of:
[root@m35lp76 perf]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:0;
...
field:char next_comm[16]; offset:40; size:16; signed:0;
reveals the character arrays prev_comm and next_comm are per
default unsigned char and have values in the range of 0..255.
On x86 both fields are signed as this output shows:
[root@f29]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:1;
...
field:char next_comm[16]; offset:40; size:16; signed:1;
and the character arrays prev_comm and next_comm are per default signed
char and have values in the range of -1..127. The implementation of
type char is architecture specific.
Since the character arrays in both tracepoints sched_switch and
sched_wakeup should contain ascii characters, simply omit the check for
signedness in the test case.
Output before:
[root@m35lp76 perf]# ./perf test -F 14
14: Parse sched tracepoints fields :
--- start ---
sched:sched_switch: "prev_comm" signedness(0) is wrong, should be 1
sched:sched_switch: "next_comm" signedness(0) is wrong, should be 1
sched:sched_wakeup: "comm" signedness(0) is wrong, should be 1
---- end ----
14: Parse sched tracepoints fields : FAILED!
[root@m35lp76 perf]#
Output after:
[root@m35lp76 perf]# ./perf test -Fv 14
14: Parse sched tracepoints fields :
--- start ---
---- end ----
Parse sched tracepoints fields: Ok
[root@m35lp76 perf]#
Fixes: 489338a717a0 ("perf tests evsel-tp-sched: Fix bitwise operator")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190219153639.31267-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/tests/evsel-tp-sched.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/perf/tests/evsel-tp-sched.c b/tools/perf/tests/evsel-tp-sched.c
index 67bcbf876776..d0406116c905 100644
--- a/tools/perf/tests/evsel-tp-sched.c
+++ b/tools/perf/tests/evsel-tp-sched.c
@@ -43,7 +43,7 @@ int test__perf_evsel__tp_sched_test(struct test *test __maybe_unused, int subtes
return -1;
}
- if (perf_evsel__test_field(evsel, "prev_comm", 16, true))
+ if (perf_evsel__test_field(evsel, "prev_comm", 16, false))
ret = -1;
if (perf_evsel__test_field(evsel, "prev_pid", 4, true))
@@ -55,7 +55,7 @@ int test__perf_evsel__tp_sched_test(struct test *test __maybe_unused, int subtes
if (perf_evsel__test_field(evsel, "prev_state", sizeof(long), true))
ret = -1;
- if (perf_evsel__test_field(evsel, "next_comm", 16, true))
+ if (perf_evsel__test_field(evsel, "next_comm", 16, false))
ret = -1;
if (perf_evsel__test_field(evsel, "next_pid", 4, true))
@@ -73,7 +73,7 @@ int test__perf_evsel__tp_sched_test(struct test *test __maybe_unused, int subtes
return -1;
}
- if (perf_evsel__test_field(evsel, "comm", 16, true))
+ if (perf_evsel__test_field(evsel, "comm", 16, false))
ret = -1;
if (perf_evsel__test_field(evsel, "pid", 4, true))
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 081/187] mwifiex: dont advertise IBSS features without FW support
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (79 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 080/187] perf test: Fix failure of evsel-tp-sched test on s390 Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:46 ` [PATCH 4.19 082/187] perf report: Dont shadow inlined symbol with different addr range Greg Kroah-Hartman
` (110 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian Norris, Kalle Valo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6f21ab30469d670de620f758330aca9f3433f693 ]
As it is, doing something like
# iw phy phy0 interface add foobar type ibss
on a firmware that doesn't have ad-hoc support just yields failures of
HostCmd_CMD_SET_BSS_MODE, which happened to return a '-1' error code
(-EPERM? not really right...) and sometimes may even crash the firmware
along the way.
Let's parse the firmware capability flag while registering the wiphy, so
we don't allow attempting IBSS at all, and we get a proper -EOPNOTSUPP
from nl80211 instead.
Fixes: e267e71e68ae ("mwifiex: Disable adhoc feature based on firmware capability")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index adc88433faa8..2d87ebbfa4da 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -4282,11 +4282,13 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
wiphy->mgmt_stypes = mwifiex_mgmt_stypes;
wiphy->max_remain_on_channel_duration = 5000;
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_AP);
+ if (ISSUPP_ADHOC_ENABLED(adapter->fw_cap_info))
+ wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+
wiphy->bands[NL80211_BAND_2GHZ] = &mwifiex_band_2ghz;
if (adapter->config_bands & BAND_A)
wiphy->bands[NL80211_BAND_5GHZ] = &mwifiex_band_5ghz;
@@ -4346,11 +4348,13 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
wiphy->available_antennas_tx = BIT(adapter->number_of_antenna) - 1;
wiphy->available_antennas_rx = BIT(adapter->number_of_antenna) - 1;
- wiphy->features |= NL80211_FEATURE_HT_IBSS |
- NL80211_FEATURE_INACTIVITY_TIMER |
+ wiphy->features |= NL80211_FEATURE_INACTIVITY_TIMER |
NL80211_FEATURE_LOW_PRIORITY_SCAN |
NL80211_FEATURE_NEED_OBSS_SCAN;
+ if (ISSUPP_ADHOC_ENABLED(adapter->fw_cap_info))
+ wiphy->features |= NL80211_FEATURE_HT_IBSS;
+
if (ISSUPP_RANDOM_MAC(adapter->fw_cap_info))
wiphy->features |= NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR |
NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR |
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 082/187] perf report: Dont shadow inlined symbol with different addr range
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (80 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 081/187] mwifiex: dont advertise IBSS features without FW support Greg Kroah-Hartman
@ 2019-04-04 8:46 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 083/187] SoC: imx-sgtl5000: add missing put_device() Greg Kroah-Hartman
` (109 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:46 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, He Kuang, Jiri Olsa,
Alexander Shishkin, Milian Wolff, Namhyung Kim, Peter Zijlstra,
Arnaldo Carvalho de Melo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7346195e8643482968f547483e0d823ec1982fab ]
We can't assume inlined symbols with the same name are equal, because
their address range may be different. This will cause the symbols with
different addresses be shadowed when adding to the hist entry, and lead
to ERANGE error when checking the symbol address during sample parse,
the addr should be within the range of [sym.start, sym.end].
The error message is like: "0x36aea60 [0x8]: failed to process type: 68".
The second parameter of symbol__new() is the length of the fake symbol
for the inline frame, which is the subtraction of the end and start
address of base_sym.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: aa441895f7b4 ("perf report: Compare symbol name for inlined frames when sorting")
Link: http://lkml.kernel.org/r/20190219130531.15692-1-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/sort.c | 10 ++++++++--
tools/perf/util/srcline.c | 2 +-
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index b284276ec963..46daa22b86e3 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -229,8 +229,14 @@ static int64_t _sort__sym_cmp(struct symbol *sym_l, struct symbol *sym_r)
if (sym_l == sym_r)
return 0;
- if (sym_l->inlined || sym_r->inlined)
- return strcmp(sym_l->name, sym_r->name);
+ if (sym_l->inlined || sym_r->inlined) {
+ int ret = strcmp(sym_l->name, sym_r->name);
+
+ if (ret)
+ return ret;
+ if ((sym_l->start <= sym_r->end) && (sym_l->end >= sym_r->start))
+ return 0;
+ }
if (sym_l->start != sym_r->start)
return (int64_t)(sym_r->start - sym_l->start);
diff --git a/tools/perf/util/srcline.c b/tools/perf/util/srcline.c
index e767c4a9d4d2..af3f9b9f1e8b 100644
--- a/tools/perf/util/srcline.c
+++ b/tools/perf/util/srcline.c
@@ -104,7 +104,7 @@ static struct symbol *new_inline_sym(struct dso *dso,
} else {
/* create a fake symbol for the inline frame */
inline_sym = symbol__new(base_sym ? base_sym->start : 0,
- base_sym ? base_sym->end : 0,
+ base_sym ? (base_sym->end - base_sym->start) : 0,
base_sym ? base_sym->binding : 0,
base_sym ? base_sym->type : 0,
funcname);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 083/187] SoC: imx-sgtl5000: add missing put_device()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (81 preceding siblings ...)
2019-04-04 8:46 ` [PATCH 4.19 082/187] perf report: Dont shadow inlined symbol with different addr range Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 084/187] media: ov7740: fix runtime pm initialization Greg Kroah-Hartman
` (108 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wen Yang, Timur Tabi, Nicolin Chen,
Xiubo Li, Fabio Estevam, Liam Girdwood, Mark Brown,
Jaroslav Kysela, Takashi Iwai, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, NXP Linux Team, alsa-devel,
linuxppc-dev, linux-arm-kernel, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8fa857da9744f513036df1c43ab57f338941ae7d ]
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Detected by coccinelle with the following warnings:
./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/imx-sgtl5000.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index c29200cf755a..9b9a7ec52905 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -108,6 +108,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
ret = -EPROBE_DEFER;
goto fail;
}
+ put_device(&ssi_pdev->dev);
codec_dev = of_find_i2c_device_by_node(codec_np);
if (!codec_dev) {
dev_err(&pdev->dev, "failed to find codec platform device\n");
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 084/187] media: ov7740: fix runtime pm initialization
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (82 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 083/187] SoC: imx-sgtl5000: add missing put_device() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 085/187] media: sh_veu: Correct return type for mem2mem buffer helpers Greg Kroah-Hartman
` (107 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wenyou Yang, Akinobu Mita,
Eugen Hristev, Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 12aceee1f412c3ddc7750155fec06c906f14ab51 ]
The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(),
and this makes this device's runtime PM usage count a negative value.
The ov7740_set_ctrl() tries to do something only if the device's runtime
PM usage counter is nonzero.
ov7740_set_ctrl()
{
if (!pm_runtime_get_if_in_use(&client->dev))
return 0;
<do something>;
pm_runtime_put(&client->dev);
return ret;
}
However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup()
while the runtime PM of this device is not yet enabled. In this case,
the pm_runtime_get_if_in_use() returns -EINVAL (!= 0).
Therefore we can't bail out of this function and the usage count is
decreased by pm_runtime_put() without increment.
This fixes this problem by enabling the runtime PM of this device before
v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called
when the runtime PM is enabled.
Cc: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/ov7740.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
index 605f3e25ad82..f5a1ee90a6c5 100644
--- a/drivers/media/i2c/ov7740.c
+++ b/drivers/media/i2c/ov7740.c
@@ -1101,6 +1101,9 @@ static int ov7740_probe(struct i2c_client *client,
if (ret)
return ret;
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+
ret = ov7740_detect(ov7740);
if (ret)
goto error_detect;
@@ -1123,8 +1126,6 @@ static int ov7740_probe(struct i2c_client *client,
if (ret)
goto error_async_register;
- pm_runtime_set_active(&client->dev);
- pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
return 0;
@@ -1134,6 +1135,8 @@ error_async_register:
error_init_controls:
ov7740_free_controls(ov7740);
error_detect:
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
ov7740_set_power(ov7740, 0);
media_entity_cleanup(&ov7740->subdev.entity);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 085/187] media: sh_veu: Correct return type for mem2mem buffer helpers
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (83 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 084/187] media: ov7740: fix runtime pm initialization Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 086/187] media: s5p-jpeg: " Greg Kroah-Hartman
` (106 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 43c145195c7fc3025ee7ecfc67112ac1c82af7c2 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/sh_veu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c
index 1d274c64de09..03ee9839a03e 100644
--- a/drivers/media/platform/sh_veu.c
+++ b/drivers/media/platform/sh_veu.c
@@ -273,13 +273,13 @@ static void sh_veu_process(struct sh_veu_dev *veu,
static void sh_veu_device_run(void *priv)
{
struct sh_veu_dev *veu = priv;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
src_buf = v4l2_m2m_next_src_buf(veu->m2m_ctx);
dst_buf = v4l2_m2m_next_dst_buf(veu->m2m_ctx);
if (src_buf && dst_buf)
- sh_veu_process(veu, src_buf, dst_buf);
+ sh_veu_process(veu, &src_buf->vb2_buf, &dst_buf->vb2_buf);
}
/* ========== video ioctls ========== */
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 086/187] media: s5p-jpeg: Correct return type for mem2mem buffer helpers
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (84 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 085/187] media: sh_veu: Correct return type for mem2mem buffer helpers Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 087/187] media: rockchip/rga: " Greg Kroah-Hartman
` (105 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4a88f89885c7cf65c62793f385261a6e3315178a ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/s5p-jpeg/jpeg-core.c | 38 ++++++++++-----------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 04fd2e0493c0..29daecf8de7d 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -793,14 +793,14 @@ static void skip(struct s5p_jpeg_buffer *buf, long len);
static void exynos4_jpeg_parse_decode_h_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, x, components;
jpeg_buffer.size = 2; /* Ls */
jpeg_buffer.data =
- (unsigned long)vb2_plane_vaddr(vb, 0) + ctx->out_q.sos + 2;
+ (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.sos + 2;
jpeg_buffer.curr = 0;
word = 0;
@@ -830,14 +830,14 @@ static void exynos4_jpeg_parse_decode_h_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_huff_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, i, n, j;
for (j = 0; j < ctx->out_q.dht.n; ++j) {
jpeg_buffer.size = ctx->out_q.dht.len[j];
- jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(vb, 0) +
+ jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) +
ctx->out_q.dht.marker[j];
jpeg_buffer.curr = 0;
@@ -889,13 +889,13 @@ static void exynos4_jpeg_parse_huff_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_decode_q_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
int c, x, components;
jpeg_buffer.size = ctx->out_q.sof_len;
jpeg_buffer.data =
- (unsigned long)vb2_plane_vaddr(vb, 0) + ctx->out_q.sof;
+ (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.sof;
jpeg_buffer.curr = 0;
skip(&jpeg_buffer, 5); /* P, Y, X */
@@ -920,14 +920,14 @@ static void exynos4_jpeg_parse_decode_q_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_q_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, i, j;
for (j = 0; j < ctx->out_q.dqt.n; ++j) {
jpeg_buffer.size = ctx->out_q.dqt.len[j];
- jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(vb, 0) +
+ jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) +
ctx->out_q.dqt.marker[j];
jpeg_buffer.curr = 0;
@@ -2072,15 +2072,15 @@ static void s5p_jpeg_device_run(void *priv)
{
struct s5p_jpeg_ctx *ctx = priv;
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
unsigned long src_addr, dst_addr, flags;
spin_lock_irqsave(&ctx->jpeg->slock, flags);
src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
- src_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
- dst_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+ src_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+ dst_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
s5p_jpeg_reset(jpeg->regs);
s5p_jpeg_poweron(jpeg->regs);
@@ -2153,7 +2153,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
struct s5p_jpeg_fmt *fmt;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
struct s5p_jpeg_addr jpeg_addr = {};
u32 pix_size, padding_bytes = 0;
@@ -2172,7 +2172,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
vb = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
}
- jpeg_addr.y = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr.y = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
if (fmt->colplanes == 2) {
jpeg_addr.cb = jpeg_addr.y + pix_size - padding_bytes;
@@ -2190,7 +2190,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
unsigned int jpeg_addr = 0;
if (ctx->mode == S5P_JPEG_ENCODE)
@@ -2198,7 +2198,7 @@ static void exynos4_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
else
vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
- jpeg_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
if (jpeg->variant->version == SJPEG_EXYNOS5433 &&
ctx->mode == S5P_JPEG_DECODE)
jpeg_addr += ctx->out_q.sos;
@@ -2314,7 +2314,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
struct s5p_jpeg_fmt *fmt;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
struct s5p_jpeg_addr jpeg_addr = {};
u32 pix_size;
@@ -2328,7 +2328,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
fmt = ctx->cap_q.fmt;
}
- jpeg_addr.y = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr.y = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
if (fmt->colplanes == 2) {
jpeg_addr.cb = jpeg_addr.y + pix_size;
@@ -2346,7 +2346,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
static void exynos3250_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
unsigned int jpeg_addr = 0;
if (ctx->mode == S5P_JPEG_ENCODE)
@@ -2354,7 +2354,7 @@ static void exynos3250_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
else
vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
- jpeg_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
exynos3250_jpeg_jpgadr(jpeg->regs, jpeg_addr);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 087/187] media: rockchip/rga: Correct return type for mem2mem buffer helpers
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (85 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 086/187] media: s5p-jpeg: " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 088/187] media: s5p-g2d: " Greg Kroah-Hartman
` (104 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit da2d3a4e4adabc6ccfb100bc9abd58ee9cd6c4b7 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/rockchip/rga/rga.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index ab5a6f95044a..86a76f35a9a1 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -43,7 +43,7 @@ static void device_run(void *prv)
{
struct rga_ctx *ctx = prv;
struct rockchip_rga *rga = ctx->rga;
- struct vb2_buffer *src, *dst;
+ struct vb2_v4l2_buffer *src, *dst;
unsigned long flags;
spin_lock_irqsave(&rga->ctrl_lock, flags);
@@ -53,8 +53,8 @@ static void device_run(void *prv)
src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
- rga_buf_map(src);
- rga_buf_map(dst);
+ rga_buf_map(&src->vb2_buf);
+ rga_buf_map(&dst->vb2_buf);
rga_hw_start(rga);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 088/187] media: s5p-g2d: Correct return type for mem2mem buffer helpers
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (86 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 087/187] media: rockchip/rga: " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 089/187] media: mx2_emmaprp: " Greg Kroah-Hartman
` (103 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 30fa627b32230737bc3f678067e2adfecf956987 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/s5p-g2d/g2d.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c
index e901201b6fcc..1f58574d0b96 100644
--- a/drivers/media/platform/s5p-g2d/g2d.c
+++ b/drivers/media/platform/s5p-g2d/g2d.c
@@ -487,7 +487,7 @@ static void device_run(void *prv)
{
struct g2d_ctx *ctx = prv;
struct g2d_dev *dev = ctx->dev;
- struct vb2_buffer *src, *dst;
+ struct vb2_v4l2_buffer *src, *dst;
unsigned long flags;
u32 cmd = 0;
@@ -502,10 +502,10 @@ static void device_run(void *prv)
spin_lock_irqsave(&dev->ctrl_lock, flags);
g2d_set_src_size(dev, &ctx->in);
- g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(src, 0));
+ g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(&src->vb2_buf, 0));
g2d_set_dst_size(dev, &ctx->out);
- g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(dst, 0));
+ g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(&dst->vb2_buf, 0));
g2d_set_rop4(dev, ctx->rop);
g2d_set_flip(dev, ctx->flip);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 089/187] media: mx2_emmaprp: Correct return type for mem2mem buffer helpers
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (87 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 088/187] media: s5p-g2d: " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 090/187] media: mtk-jpeg: " Greg Kroah-Hartman
` (102 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8d20dcefe471763f23ad538369ec65b51993ffff ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/mx2_emmaprp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c
index 64195c4ddeaf..419e1cb10dc6 100644
--- a/drivers/media/platform/mx2_emmaprp.c
+++ b/drivers/media/platform/mx2_emmaprp.c
@@ -274,7 +274,7 @@ static void emmaprp_device_run(void *priv)
{
struct emmaprp_ctx *ctx = priv;
struct emmaprp_q_data *s_q_data, *d_q_data;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
struct emmaprp_dev *pcdev = ctx->dev;
unsigned int s_width, s_height;
unsigned int d_width, d_height;
@@ -294,8 +294,8 @@ static void emmaprp_device_run(void *priv)
d_height = d_q_data->height;
d_size = d_width * d_height;
- p_in = vb2_dma_contig_plane_dma_addr(src_buf, 0);
- p_out = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+ p_in = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+ p_out = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
if (!p_in || !p_out) {
v4l2_err(&pcdev->v4l2_dev,
"Acquiring kernel pointers to buffers failed\n");
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 090/187] media: mtk-jpeg: Correct return type for mem2mem buffer helpers
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (88 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 089/187] media: mx2_emmaprp: " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 091/187] mt76: usb: do not run mt76u_queues_deinit twice Greg Kroah-Hartman
` (101 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1b275e4e8b70dbff9850874b30831c1bd8d3c504 ]
Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:
v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove
return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.
Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../media/platform/mtk-jpeg/mtk_jpeg_core.c | 40 +++++++++----------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index 4f24da8afecc..11429633b2fb 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -702,7 +702,7 @@ end:
v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, to_vb2_v4l2_buffer(vb));
}
-static void *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx,
+static struct vb2_v4l2_buffer *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx,
enum v4l2_buf_type type)
{
if (V4L2_TYPE_IS_OUTPUT(type))
@@ -714,7 +714,7 @@ static void *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx,
static int mtk_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
{
struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
int ret = 0;
ret = pm_runtime_get_sync(ctx->jpeg->dev);
@@ -724,14 +724,14 @@ static int mtk_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
return 0;
err:
while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
- v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_QUEUED);
+ v4l2_m2m_buf_done(vb, VB2_BUF_STATE_QUEUED);
return ret;
}
static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
{
struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
/*
* STREAMOFF is an acknowledgment for source change event.
@@ -743,7 +743,7 @@ static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
struct mtk_jpeg_src_buf *src_buf;
vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
- src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
+ src_buf = mtk_jpeg_vb2_to_srcbuf(&vb->vb2_buf);
mtk_jpeg_set_queue_data(ctx, &src_buf->dec_param);
ctx->state = MTK_JPEG_RUNNING;
} else if (V4L2_TYPE_IS_OUTPUT(q->type)) {
@@ -751,7 +751,7 @@ static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
}
while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
- v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_ERROR);
+ v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
pm_runtime_put_sync(ctx->jpeg->dev);
}
@@ -807,7 +807,7 @@ static void mtk_jpeg_device_run(void *priv)
{
struct mtk_jpeg_ctx *ctx = priv;
struct mtk_jpeg_dev *jpeg = ctx->jpeg;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
unsigned long flags;
struct mtk_jpeg_src_buf *jpeg_src_buf;
@@ -817,11 +817,11 @@ static void mtk_jpeg_device_run(void *priv)
src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
- jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf);
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(&src_buf->vb2_buf);
if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
- for (i = 0; i < dst_buf->num_planes; i++)
- vb2_set_plane_payload(dst_buf, i, 0);
+ for (i = 0; i < dst_buf->vb2_buf.num_planes; i++)
+ vb2_set_plane_payload(&dst_buf->vb2_buf, i, 0);
buf_state = VB2_BUF_STATE_DONE;
goto dec_end;
}
@@ -833,8 +833,8 @@ static void mtk_jpeg_device_run(void *priv)
return;
}
- mtk_jpeg_set_dec_src(ctx, src_buf, &bs);
- if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, dst_buf, &fb))
+ mtk_jpeg_set_dec_src(ctx, &src_buf->vb2_buf, &bs);
+ if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, &dst_buf->vb2_buf, &fb))
goto dec_end;
spin_lock_irqsave(&jpeg->hw_lock, flags);
@@ -849,8 +849,8 @@ static void mtk_jpeg_device_run(void *priv)
dec_end:
v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
- v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state);
- v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state);
+ v4l2_m2m_buf_done(src_buf, buf_state);
+ v4l2_m2m_buf_done(dst_buf, buf_state);
v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
}
@@ -921,7 +921,7 @@ static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
{
struct mtk_jpeg_dev *jpeg = priv;
struct mtk_jpeg_ctx *ctx;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
struct mtk_jpeg_src_buf *jpeg_src_buf;
enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
u32 dec_irq_ret;
@@ -938,7 +938,7 @@ static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
- jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf);
+ jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(&src_buf->vb2_buf);
if (dec_irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW)
mtk_jpeg_dec_reset(jpeg->dec_reg_base);
@@ -948,15 +948,15 @@ static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
goto dec_end;
}
- for (i = 0; i < dst_buf->num_planes; i++)
- vb2_set_plane_payload(dst_buf, i,
+ for (i = 0; i < dst_buf->vb2_buf.num_planes; i++)
+ vb2_set_plane_payload(&dst_buf->vb2_buf, i,
jpeg_src_buf->dec_param.comp_size[i]);
buf_state = VB2_BUF_STATE_DONE;
dec_end:
- v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state);
- v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state);
+ v4l2_m2m_buf_done(src_buf, buf_state);
+ v4l2_m2m_buf_done(dst_buf, buf_state);
v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
return IRQ_HANDLED;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 091/187] mt76: usb: do not run mt76u_queues_deinit twice
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (89 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 090/187] media: mtk-jpeg: " Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 092/187] xen/gntdev: Do not destroy context while dma-bufs are in use Greg Kroah-Hartman
` (100 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lorenzo Bianconi, Felix Fietkau, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b3098121c42caaf3aea239b8655cf52d45be116f ]
Do not call mt76u_queues_deinit routine in mt76u_alloc_queues error path
since it will be run in mt76x0u_register_device or
mt76x2u_register_device error path. Current implementation triggers the
following kernel warning:
[ 67.005516] WARNING: CPU: 2 PID: 761 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa4/0xb8
[ 67.019513] refcount_t: underflow; use-after-free.
[ 67.099872] Hardware name: BCM2835
[ 67.106268] Backtrace:
[ 67.111584] [<8010c91c>] (dump_backtrace) from [<8010cc00>] (show_stack+0x20/0x24)
[ 67.124974] r6:60000013 r5:ffffffff r4:00000000 r3:a50bade6
[ 67.132226] [<8010cbe0>] (show_stack) from [<807ca5f4>] (dump_stack+0xc8/0x114)
[ 67.141225] [<807ca52c>] (dump_stack) from [<8011e65c>] (__warn+0xf4/0x120)
[ 67.149849] r9:000000bb r8:804d0138 r7:00000009 r6:8099dc84 r5:00000000 r4:b66c7b58
[ 67.160767] [<8011e568>] (__warn) from [<8011e6d0>] (warn_slowpath_fmt+0x48/0x50)
[ 67.171436] r9:7f65e128 r8:80d1419c r7:80c0bac4 r6:b97b3044 r5:b7368e00 r4:00000000
[ 67.182433] [<8011e68c>] (warn_slowpath_fmt) from [<804d0138>] (refcount_sub_and_test_checked+0xa4/0xb8)
[ 67.195221] r3:80c91c25 r2:8099dc94
[ 67.200370] r4:00000000
[ 67.204397] [<804d0094>] (refcount_sub_and_test_checked) from [<804d0164>] (refcount_dec_and_test_checked+0x18/0x1c)
[ 67.218046] r4:b7368e00 r3:00000001
[ 67.223125] [<804d014c>] (refcount_dec_and_test_checked) from [<805db49c>] (usb_free_urb+0x20/0x4c)
[ 67.235358] [<805db47c>] (usb_free_urb) from [<7f639804>] (mt76u_buf_free+0x98/0xac [mt76_usb])
[ 67.247302] r4:00000001 r3:00000001
[ 67.252468] [<7f63976c>] (mt76u_buf_free [mt76_usb]) from [<7f639ef8>] (mt76u_queues_deinit+0x44/0x100 [mt76_usb])
[ 67.266102] r8:b8fe8600 r7:b5dac480 r6:b5dace20 r5:00000001 r4:00000000 r3:00000080
[ 67.277132] [<7f639eb4>] (mt76u_queues_deinit [mt76_usb]) from [<7f65c040>] (mt76x0u_cleanup+0x40/0x4c [mt76x0u])
[ 67.290737] r7:b5dac480 r6:b8fe8600 r5:ffffffea r4:b5dace20
[ 67.298069] [<7f65c000>] (mt76x0u_cleanup [mt76x0u]) from [<7f65c564>] (mt76x0u_probe+0x1f0/0x354 [mt76x0u])
[ 67.311174] r4:b5dace20 r3:00000000
[ 67.316312] [<7f65c374>] (mt76x0u_probe [mt76x0u]) from [<805e0b6c>] (usb_probe_interface+0x104/0x240)
[ 67.328915] r7:00000000 r6:7f65e034 r5:b6634800 r4:b8fe8620
[ 67.336276] [<805e0a68>] (usb_probe_interface) from [<8056a8bc>] (really_probe+0x224/0x2f8)
[ 67.347965] r10:b65f0a00 r9:00000019 r8:7f65e034 r7:80d3e124 r6:00000000 r5:80d3e120
[ 67.359175] r4:b8fe8620 r3:805e0a68
[ 67.364384] [<8056a698>] (really_probe) from [<8056ab60>] (driver_probe_device+0x6c/0x180)
[ 67.375974] r10:b65f0a00 r9:7f65e2c0 r8:b8fe8620 r7:00000000 r6:7f65e034 r5:7f65e034
[ 67.387170] r4:b8fe8620 r3:00000000
[ 67.392378] [<8056aaf4>] (driver_probe_device) from [<8056ad54>] (__driver_attach+0xe0/0xe4)
[ 67.404097] r9:7f65e2c0 r8:7f65d22c r7:00000000 r6:b8fe8654 r5:7f65e034 r4:b8fe8620
[ 67.415122] [<8056ac74>] (__driver_attach) from [<8056880c>] (bus_for_each_dev+0x68/0xa0)
[ 67.426628] r6:8056ac74 r5:7f65e034 r4:00000000 r3:00000027
[ 67.434017] [<805687a4>] (bus_for_each_dev) from [<8056a1cc>] (driver_attach+0x28/0x30)
[ 67.445394] r6:80c6ddc8 r5:b7368f80 r4:7f65e034
[ 67.451703] [<8056a1a4>] (driver_attach) from [<80569c24>] (bus_add_driver+0x194/0x21c)
[ 67.463081] [<80569a90>] (bus_add_driver) from [<8056b504>] (driver_register+0x8c/0x124)
[ 67.474560] r7:80c6ddc8 r6:7f65e034 r5:00000000 r4:7f65e034
[ 67.481964] [<8056b478>] (driver_register) from [<805df510>] (usb_register_driver+0x74/0x140)
[ 67.493901] r5:00000000 r4:7f65e000
[ 67.499131] [<805df49c>] (usb_register_driver) from [<7f661024>] (mt76x0_driver_init+0x24/0x1000 [mt76x0u])
[ 67.512258] r9:00000001 r8:7f65e308 r7:00000000 r6:80c08d48 r5:7f661000 r4:7f65e2c0
[ 67.523404] [<7f661000>] (mt76x0_driver_init [mt76x0u]) from [<80102f6c>] (do_one_initcall+0x4c/0x210)
[ 67.536142] [<80102f20>] (do_one_initcall) from [<801ae63c>] (do_init_module+0x6c/0x21c)
[ 67.547639] r8:7f65e308 r7:80c08d48 r6:b65f0ac0 r5:7f65e2c0 r4:7f65e2c0
[ 67.556129] [<801ae5d0>] (do_init_module) from [<801ad68c>] (load_module+0x1d10/0x2304)
Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/usb.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index 79e59f2379a2..8d40e92fb6f2 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -796,16 +796,9 @@ int mt76u_alloc_queues(struct mt76_dev *dev)
err = mt76u_alloc_rx(dev);
if (err < 0)
- goto err;
-
- err = mt76u_alloc_tx(dev);
- if (err < 0)
- goto err;
+ return err;
- return 0;
-err:
- mt76u_queues_deinit(dev);
- return err;
+ return mt76u_alloc_tx(dev);
}
EXPORT_SYMBOL_GPL(mt76u_alloc_queues);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 092/187] xen/gntdev: Do not destroy context while dma-bufs are in use
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (90 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 091/187] mt76: usb: do not run mt76u_queues_deinit twice Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 093/187] vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1 Greg Kroah-Hartman
` (99 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleksandr Andrushchenko,
Juergen Gross, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fa13e665e02874c0a5f4d06d6967ae34a6cb3d6a ]
If there are exported DMA buffers which are still in use and
grant device is closed by either normal user-space close or by
a signal this leads to the grant device context to be destroyed,
thus making it not possible to correctly destroy those exported
buffers when they are returned back to gntdev and makes the module
crash:
[ 339.617540] [<ffff00000854c0d8>] dmabuf_exp_ops_release+0x40/0xa8
[ 339.617560] [<ffff00000867a6e8>] dma_buf_release+0x60/0x190
[ 339.617577] [<ffff0000082211f0>] __fput+0x88/0x1d0
[ 339.617589] [<ffff000008221394>] ____fput+0xc/0x18
[ 339.617607] [<ffff0000080ed4e4>] task_work_run+0x9c/0xc0
[ 339.617622] [<ffff000008089714>] do_notify_resume+0xfc/0x108
Fix this by referencing gntdev on each DMA buffer export and
unreferencing on buffer release.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/xen/gntdev-dmabuf.c | 12 +++++++++++-
drivers/xen/gntdev-dmabuf.h | 2 +-
drivers/xen/gntdev.c | 2 +-
3 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/xen/gntdev-dmabuf.c b/drivers/xen/gntdev-dmabuf.c
index cba6b586bfbd..d97fcfc5e558 100644
--- a/drivers/xen/gntdev-dmabuf.c
+++ b/drivers/xen/gntdev-dmabuf.c
@@ -80,6 +80,12 @@ struct gntdev_dmabuf_priv {
struct list_head imp_list;
/* This is the lock which protects dma_buf_xxx lists. */
struct mutex lock;
+ /*
+ * We reference this file while exporting dma-bufs, so
+ * the grant device context is not destroyed while there are
+ * external users alive.
+ */
+ struct file *filp;
};
/* DMA buffer export support. */
@@ -311,6 +317,7 @@ static void dmabuf_exp_release(struct kref *kref)
dmabuf_exp_wait_obj_signal(gntdev_dmabuf->priv, gntdev_dmabuf);
list_del(&gntdev_dmabuf->next);
+ fput(gntdev_dmabuf->priv->filp);
kfree(gntdev_dmabuf);
}
@@ -423,6 +430,7 @@ static int dmabuf_exp_from_pages(struct gntdev_dmabuf_export_args *args)
mutex_lock(&args->dmabuf_priv->lock);
list_add(&gntdev_dmabuf->next, &args->dmabuf_priv->exp_list);
mutex_unlock(&args->dmabuf_priv->lock);
+ get_file(gntdev_dmabuf->priv->filp);
return 0;
fail:
@@ -834,7 +842,7 @@ long gntdev_ioctl_dmabuf_imp_release(struct gntdev_priv *priv,
return dmabuf_imp_release(priv->dmabuf_priv, op.fd);
}
-struct gntdev_dmabuf_priv *gntdev_dmabuf_init(void)
+struct gntdev_dmabuf_priv *gntdev_dmabuf_init(struct file *filp)
{
struct gntdev_dmabuf_priv *priv;
@@ -847,6 +855,8 @@ struct gntdev_dmabuf_priv *gntdev_dmabuf_init(void)
INIT_LIST_HEAD(&priv->exp_wait_list);
INIT_LIST_HEAD(&priv->imp_list);
+ priv->filp = filp;
+
return priv;
}
diff --git a/drivers/xen/gntdev-dmabuf.h b/drivers/xen/gntdev-dmabuf.h
index 7220a53d0fc5..3d9b9cf9d5a1 100644
--- a/drivers/xen/gntdev-dmabuf.h
+++ b/drivers/xen/gntdev-dmabuf.h
@@ -14,7 +14,7 @@
struct gntdev_dmabuf_priv;
struct gntdev_priv;
-struct gntdev_dmabuf_priv *gntdev_dmabuf_init(void);
+struct gntdev_dmabuf_priv *gntdev_dmabuf_init(struct file *filp);
void gntdev_dmabuf_fini(struct gntdev_dmabuf_priv *priv);
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index b0b02a501167..9d8e02cfd480 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -600,7 +600,7 @@ static int gntdev_open(struct inode *inode, struct file *flip)
mutex_init(&priv->lock);
#ifdef CONFIG_XEN_GNTDEV_DMABUF
- priv->dmabuf_priv = gntdev_dmabuf_init();
+ priv->dmabuf_priv = gntdev_dmabuf_init(flip);
if (IS_ERR(priv->dmabuf_priv)) {
ret = PTR_ERR(priv->dmabuf_priv);
kfree(priv);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 093/187] vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (91 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 092/187] xen/gntdev: Do not destroy context while dma-bufs are in use Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 094/187] HID: intel-ish-hid: avoid binding wrong ishtp_cl_device Greg Kroah-Hartman
` (98 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Viro, H.J. Lu,
Aurelien Jarno, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cc4b1242d7e3b42eed73881fc749944146493e4f ]
The preadv2 and pwritev2 syscalls are supposed to emulate the readv and
writev syscalls when offset == -1. Therefore the compat code should
check for offset before calling do_compat_preadv64 and
do_compat_pwritev64. This is the case for the preadv2 and pwritev2
syscalls, but handling of offset == -1 is missing in their 64-bit
equivalent.
This patch fixes that, calling do_compat_readv and do_compat_writev when
offset == -1. This fixes the following glibc tests on x32:
- misc/tst-preadvwritev2
- misc/tst-preadvwritev64v2
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/read_write.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/fs/read_write.c b/fs/read_write.c
index 8a2737f0d61d..562974a0616c 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1241,6 +1241,9 @@ COMPAT_SYSCALL_DEFINE5(preadv64v2, unsigned long, fd,
const struct compat_iovec __user *,vec,
unsigned long, vlen, loff_t, pos, rwf_t, flags)
{
+ if (pos == -1)
+ return do_compat_readv(fd, vec, vlen, flags);
+
return do_compat_preadv64(fd, vec, vlen, pos, flags);
}
#endif
@@ -1347,6 +1350,9 @@ COMPAT_SYSCALL_DEFINE5(pwritev64v2, unsigned long, fd,
const struct compat_iovec __user *,vec,
unsigned long, vlen, loff_t, pos, rwf_t, flags)
{
+ if (pos == -1)
+ return do_compat_writev(fd, vec, vlen, flags);
+
return do_compat_pwritev64(fd, vec, vlen, pos, flags);
}
#endif
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 094/187] HID: intel-ish-hid: avoid binding wrong ishtp_cl_device
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (92 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 093/187] vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1 Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 095/187] cgroup, rstat: Dont flush subtree root unless necessary Greg Kroah-Hartman
` (97 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hong Liu, Hongyan Song,
Srinivas Pandruvada, Jiri Kosina, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0d28f49412405d87d3aae83da255070a46e67627 ]
When performing a warm reset in ishtp bus driver, the ishtp_cl_device
will not be removed, its fw_client still points to the already freed
ishtp_device.fw_clients array.
Later after driver finishing ishtp client enumeration, this dangling
pointer may cause driver to bind the wrong ishtp_cl_device to the new
client, causing wrong callback to be called for messages intended for
the new client.
This helps in development of firmware where frequent switching of
firmwares is required without Linux reboot.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Tested-by: Hongyan Song <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/intel-ish-hid/ishtp/bus.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/intel-ish-hid/ishtp/bus.c b/drivers/hid/intel-ish-hid/ishtp/bus.c
index 2623a567ffba..f546635e9ac9 100644
--- a/drivers/hid/intel-ish-hid/ishtp/bus.c
+++ b/drivers/hid/intel-ish-hid/ishtp/bus.c
@@ -623,7 +623,8 @@ int ishtp_cl_device_bind(struct ishtp_cl *cl)
spin_lock_irqsave(&cl->dev->device_list_lock, flags);
list_for_each_entry(cl_device, &cl->dev->device_list,
device_link) {
- if (cl_device->fw_client->client_id == cl->fw_client_id) {
+ if (cl_device->fw_client &&
+ cl_device->fw_client->client_id == cl->fw_client_id) {
cl->device = cl_device;
rv = 0;
break;
@@ -683,6 +684,7 @@ void ishtp_bus_remove_all_clients(struct ishtp_device *ishtp_dev,
spin_lock_irqsave(&ishtp_dev->device_list_lock, flags);
list_for_each_entry_safe(cl_device, n, &ishtp_dev->device_list,
device_link) {
+ cl_device->fw_client = NULL;
if (warm_reset && cl_device->reference_count)
continue;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 095/187] cgroup, rstat: Dont flush subtree root unless necessary
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (93 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 094/187] HID: intel-ish-hid: avoid binding wrong ishtp_cl_device Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 096/187] jbd2: fix race when writing superblock Greg Kroah-Hartman
` (96 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tejun Heo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b4ff1b44bcd384d22fcbac6ebaf9cc0d33debe50 ]
cgroup_rstat_cpu_pop_updated() is used to traverse the updated cgroups
on flush. While it was only visiting updated ones in the subtree, it
was visiting @root unconditionally. We can easily check whether @root
is updated or not by looking at its ->updated_next just as with the
cgroups in the subtree.
* Remove the unnecessary cgroup_parent() test. The system root cgroup
is never updated and thus its ->updated_next is always NULL. No
need to test whether cgroup_parent() exists in addition to
->updated_next.
* Terminate traverse if ->updated_next is NULL. This can only happen
for subtree @root and there's no reason to visit it if it's not
marked updated.
This reduces cpu consumption when reading a lot of rstat backed files.
In a micro benchmark reading stat from ~1600 cgroups, the sys time was
lowered by >40%.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/cgroup/rstat.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c
index d503d1a9007c..bb95a35e8c2d 100644
--- a/kernel/cgroup/rstat.c
+++ b/kernel/cgroup/rstat.c
@@ -87,7 +87,6 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
struct cgroup *root, int cpu)
{
struct cgroup_rstat_cpu *rstatc;
- struct cgroup *parent;
if (pos == root)
return NULL;
@@ -115,8 +114,8 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
* However, due to the way we traverse, @pos will be the first
* child in most cases. The only exception is @root.
*/
- parent = cgroup_parent(pos);
- if (parent && rstatc->updated_next) {
+ if (rstatc->updated_next) {
+ struct cgroup *parent = cgroup_parent(pos);
struct cgroup_rstat_cpu *prstatc = cgroup_rstat_cpu(parent, cpu);
struct cgroup_rstat_cpu *nrstatc;
struct cgroup **nextp;
@@ -140,9 +139,12 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
* updated stat.
*/
smp_mb();
+
+ return pos;
}
- return pos;
+ /* only happens for @root */
+ return NULL;
}
/* see cgroup_rstat_flush() */
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 096/187] jbd2: fix race when writing superblock
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (94 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 095/187] cgroup, rstat: Dont flush subtree root unless necessary Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 097/187] leds: lp55xx: fix null deref on firmware load failure Greg Kroah-Hartman
` (95 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, zhangyi (F),
Jan Kara, Theodore Tso, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 538bcaa6261b77e71d37f5596c33127c1a3ec3f7 ]
The jbd2 superblock is lockless now, so there is probably a race
condition between writing it so disk and modifing contents of it, which
may lead to checksum error. The following race is the one case that we
have captured.
jbd2 fsstress
jbd2_journal_commit_transaction
jbd2_journal_update_sb_log_tail
jbd2_write_superblock
jbd2_superblock_csum_set jbd2_journal_revoke
jbd2_journal_set_features(revork)
modify superblock
submit_bh(checksum incorrect)
Fix this by locking the buffer head before modifing it. We always
write the jbd2 superblock after we modify it, so this just means
calling the lock_buffer() a little earlier.
This checksum corruption problem can be reproduced by xfstests
generic/475.
Reported-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jbd2/journal.c | 52 ++++++++++++++++++++++++-----------------------
1 file changed, 27 insertions(+), 25 deletions(-)
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 8ef6b6daaa7a..88f2a49338a1 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1356,6 +1356,10 @@ static int journal_reset(journal_t *journal)
return jbd2_journal_start_thread(journal);
}
+/*
+ * This function expects that the caller will have locked the journal
+ * buffer head, and will return with it unlocked
+ */
static int jbd2_write_superblock(journal_t *journal, int write_flags)
{
struct buffer_head *bh = journal->j_sb_buffer;
@@ -1365,7 +1369,6 @@ static int jbd2_write_superblock(journal_t *journal, int write_flags)
trace_jbd2_write_superblock(journal, write_flags);
if (!(journal->j_flags & JBD2_BARRIER))
write_flags &= ~(REQ_FUA | REQ_PREFLUSH);
- lock_buffer(bh);
if (buffer_write_io_error(bh)) {
/*
* Oh, dear. A previous attempt to write the journal
@@ -1424,6 +1427,7 @@ int jbd2_journal_update_sb_log_tail(journal_t *journal, tid_t tail_tid,
jbd_debug(1, "JBD2: updating superblock (start %lu, seq %u)\n",
tail_block, tail_tid);
+ lock_buffer(journal->j_sb_buffer);
sb->s_sequence = cpu_to_be32(tail_tid);
sb->s_start = cpu_to_be32(tail_block);
@@ -1454,18 +1458,17 @@ static void jbd2_mark_journal_empty(journal_t *journal, int write_op)
journal_superblock_t *sb = journal->j_superblock;
BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex));
- read_lock(&journal->j_state_lock);
- /* Is it already empty? */
- if (sb->s_start == 0) {
- read_unlock(&journal->j_state_lock);
+ lock_buffer(journal->j_sb_buffer);
+ if (sb->s_start == 0) { /* Is it already empty? */
+ unlock_buffer(journal->j_sb_buffer);
return;
}
+
jbd_debug(1, "JBD2: Marking journal as empty (seq %d)\n",
journal->j_tail_sequence);
sb->s_sequence = cpu_to_be32(journal->j_tail_sequence);
sb->s_start = cpu_to_be32(0);
- read_unlock(&journal->j_state_lock);
jbd2_write_superblock(journal, write_op);
@@ -1488,9 +1491,8 @@ void jbd2_journal_update_sb_errno(journal_t *journal)
journal_superblock_t *sb = journal->j_superblock;
int errcode;
- read_lock(&journal->j_state_lock);
+ lock_buffer(journal->j_sb_buffer);
errcode = journal->j_errno;
- read_unlock(&journal->j_state_lock);
if (errcode == -ESHUTDOWN)
errcode = 0;
jbd_debug(1, "JBD2: updating superblock error (errno %d)\n", errcode);
@@ -1894,28 +1896,27 @@ int jbd2_journal_set_features (journal_t *journal, unsigned long compat,
sb = journal->j_superblock;
+ /* Load the checksum driver if necessary */
+ if ((journal->j_chksum_driver == NULL) &&
+ INCOMPAT_FEATURE_ON(JBD2_FEATURE_INCOMPAT_CSUM_V3)) {
+ journal->j_chksum_driver = crypto_alloc_shash("crc32c", 0, 0);
+ if (IS_ERR(journal->j_chksum_driver)) {
+ printk(KERN_ERR "JBD2: Cannot load crc32c driver.\n");
+ journal->j_chksum_driver = NULL;
+ return 0;
+ }
+ /* Precompute checksum seed for all metadata */
+ journal->j_csum_seed = jbd2_chksum(journal, ~0, sb->s_uuid,
+ sizeof(sb->s_uuid));
+ }
+
+ lock_buffer(journal->j_sb_buffer);
+
/* If enabling v3 checksums, update superblock */
if (INCOMPAT_FEATURE_ON(JBD2_FEATURE_INCOMPAT_CSUM_V3)) {
sb->s_checksum_type = JBD2_CRC32C_CHKSUM;
sb->s_feature_compat &=
~cpu_to_be32(JBD2_FEATURE_COMPAT_CHECKSUM);
-
- /* Load the checksum driver */
- if (journal->j_chksum_driver == NULL) {
- journal->j_chksum_driver = crypto_alloc_shash("crc32c",
- 0, 0);
- if (IS_ERR(journal->j_chksum_driver)) {
- printk(KERN_ERR "JBD2: Cannot load crc32c "
- "driver.\n");
- journal->j_chksum_driver = NULL;
- return 0;
- }
-
- /* Precompute checksum seed for all metadata */
- journal->j_csum_seed = jbd2_chksum(journal, ~0,
- sb->s_uuid,
- sizeof(sb->s_uuid));
- }
}
/* If enabling v1 checksums, downgrade superblock */
@@ -1927,6 +1928,7 @@ int jbd2_journal_set_features (journal_t *journal, unsigned long compat,
sb->s_feature_compat |= cpu_to_be32(compat);
sb->s_feature_ro_compat |= cpu_to_be32(ro);
sb->s_feature_incompat |= cpu_to_be32(incompat);
+ unlock_buffer(journal->j_sb_buffer);
return 1;
#undef COMPAT_FEATURE_ON
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 097/187] leds: lp55xx: fix null deref on firmware load failure
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (95 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 096/187] jbd2: fix race when writing superblock Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 098/187] perf report: Add s390 diagnosic sampling descriptor size Greg Kroah-Hartman
` (94 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michal Kazior, Jacek Anaszewski, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5ddb0869bfc1bca6cfc592c74c64a026f936638c ]
I've stumbled upon a kernel crash and the logs
pointed me towards the lp5562 driver:
> <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2
> <4>[306013.894990] lp5562 0-0030: Falling back to user helper
> ...
> <3>[306073.924886] lp5562 0-0030: firmware request failed
> <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58
> <4>[306074.255539] LR is at release_firmware+0x6c/0x138
> ...
After taking a look I noticed firmware_release()
could be called with either NULL or a dangling
pointer.
Fixes: 10c06d178df11 ("leds-lp55xx: support firmware interface")
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/leds/leds-lp55xx-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 3d79a6380761..723f2f17497a 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -201,7 +201,7 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
if (!fw) {
dev_err(dev, "firmware request failed\n");
- goto out;
+ return;
}
/* handling firmware data is chip dependent */
@@ -214,9 +214,9 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
mutex_unlock(&chip->lock);
-out:
/* firmware should be released for other channel use */
release_firmware(chip->fw);
+ chip->fw = NULL;
}
static int lp55xx_request_firmware(struct lp55xx_chip *chip)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 098/187] perf report: Add s390 diagnosic sampling descriptor size
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (96 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 097/187] leds: lp55xx: fix null deref on firmware load failure Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 099/187] iwlwifi: pcie: fix emergency path Greg Kroah-Hartman
` (93 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Richter, Hendrik Brueckner,
Heiko Carstens, Martin Schwidefsky, Arnaldo Carvalho de Melo,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2187d87eacd46f6214ce3dc9cfd7a558375a4153 ]
On IBM z13 machine types 2964 and 2965 the descriptor
sizes for sampling and diagnostic sampling entries
might be missing in the trailer entry and are set to zero.
This leads to a perf report failure when processing diagnostic
sampling entries.
This patch adds missing descriptor sizes when the trailer entry
contains zero for these fields.
Output before:
[root@s38lp82 perf]# ./perf report --stdio | fgrep Samples
0xabbf0 [0x8]: failed to process type: 68
Error:
failed to process sample
[root@s38lp82 perf]#
Output after:
[root@s38lp82 perf]# ./perf report --stdio | fgrep Samples
# Total Lost Samples: 0
# Samples: 3K of event 'SF_CYCLES_BASIC_DIAG'
# Samples: 162 of event 'CF_DIAG'
[root@s38lp82 perf]#
Fixes: 2b1444f2e28b ("perf report: Add raw report support for s390 auxiliary trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190211100627.85714-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/s390-cpumsf.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tools/perf/util/s390-cpumsf.c b/tools/perf/util/s390-cpumsf.c
index aa7f8c11fbb7..910f2621d211 100644
--- a/tools/perf/util/s390-cpumsf.c
+++ b/tools/perf/util/s390-cpumsf.c
@@ -294,6 +294,11 @@ static bool s390_cpumsf_validate(int machine_type,
*dsdes = 85;
*bsdes = 32;
break;
+ case 2964:
+ case 2965:
+ *dsdes = 112;
+ *bsdes = 32;
+ break;
default:
/* Illegal trailer entry */
return false;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 099/187] iwlwifi: pcie: fix emergency path
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (97 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 098/187] perf report: Add s390 diagnosic sampling descriptor size Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 100/187] ACPI / video: Refactor and fix dmi_is_desktop() Greg Kroah-Hartman
` (92 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ilan Peer, Sara Sharon, Luca Coelho,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c6ac9f9fb98851f47b978a9476594fc3c477a34d ]
Allocator swaps the pending requests with 0 when it starts
working. This means that relying on it n RX path to decide if
to move to emergency is not always a good idea, since it may
be zero, but there are still a lot of unallocated RBs in the
system. Change allocator to decrement the pending requests on
real time. It is more expensive since it accesses the atomic
variable more times, but it gives the RX path a better idea
of the system's status.
Reported-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 868a1e863f95 ("iwlwifi: pcie: avoid empty free RB queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index d4a31e014c82..b2905f01b7df 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -502,7 +502,7 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_rb_allocator *rba = &trans_pcie->rba;
struct list_head local_empty;
- int pending = atomic_xchg(&rba->req_pending, 0);
+ int pending = atomic_read(&rba->req_pending);
IWL_DEBUG_RX(trans, "Pending allocation requests = %d\n", pending);
@@ -557,11 +557,13 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
i++;
}
+ atomic_dec(&rba->req_pending);
pending--;
+
if (!pending) {
- pending = atomic_xchg(&rba->req_pending, 0);
+ pending = atomic_read(&rba->req_pending);
IWL_DEBUG_RX(trans,
- "Pending allocation requests = %d\n",
+ "Got more pending allocation requests = %d\n",
pending);
}
@@ -573,12 +575,15 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
spin_unlock(&rba->lock);
atomic_inc(&rba->req_ready);
+
}
spin_lock(&rba->lock);
/* return unused rbds to the allocator empty list */
list_splice_tail(&local_empty, &rba->rbd_empty);
spin_unlock(&rba->lock);
+
+ IWL_DEBUG_RX(trans, "%s, exit.\n", __func__);
}
/*
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 100/187] ACPI / video: Refactor and fix dmi_is_desktop()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (98 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 099/187] iwlwifi: pcie: fix emergency path Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 101/187] selftests: skip seccomp get_metadata test if not real root Greg Kroah-Hartman
` (91 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Rafael J. Wysocki,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cecf3e3e0803462335e25d083345682518097334 ]
This commit refactors the chassis-type detection introduced by
commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") (where desktop means anything without a builtin
screen).
The DMI chassis_type is an unsigned integer, so rather then doing a
whole bunch of string-compares on it, convert it to an int and feed
the result to a switch case.
Note the switch case uses hex values, this is done because the spec
uses hex values too. This changes the check for "Main Server Chassis"
from checking for 11 decimal to 11 hexadecimal, this is a bug fix,
the original check for 11 decimal was wrong.
Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Drop redundant return statements ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpi_video.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index f0b52266b3ac..1ab1460c4a4e 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2124,21 +2124,28 @@ static int __init intel_opregion_present(void)
return opregion;
}
+/* Check if the chassis-type indicates there is no builtin LCD panel */
static bool dmi_is_desktop(void)
{
const char *chassis_type;
+ unsigned long type;
chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
if (!chassis_type)
return false;
- if (!strcmp(chassis_type, "3") || /* 3: Desktop */
- !strcmp(chassis_type, "4") || /* 4: Low Profile Desktop */
- !strcmp(chassis_type, "5") || /* 5: Pizza Box */
- !strcmp(chassis_type, "6") || /* 6: Mini Tower */
- !strcmp(chassis_type, "7") || /* 7: Tower */
- !strcmp(chassis_type, "11")) /* 11: Main Server Chassis */
+ if (kstrtoul(chassis_type, 10, &type) != 0)
+ return false;
+
+ switch (type) {
+ case 0x03: /* Desktop */
+ case 0x04: /* Low Profile Desktop */
+ case 0x05: /* Pizza Box */
+ case 0x06: /* Mini Tower */
+ case 0x07: /* Tower */
+ case 0x11: /* Main Server Chassis */
return true;
+ }
return false;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 101/187] selftests: skip seccomp get_metadata test if not real root
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (99 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 100/187] ACPI / video: Refactor and fix dmi_is_desktop() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 102/187] kprobes: Prohibit probing on bsearch() Greg Kroah-Hartman
` (90 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tycho Andersen, Kees Cook,
Shuah Khan, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3aa415dd2128e478ea3225b59308766de0e94d6b ]
The get_metadata() test requires real root, so let's skip it if we're not
real root.
Note that I used XFAIL here because that's what the test does later if
CONFIG_CHEKCKPOINT_RESTORE happens to not be enabled. After looking at the
code, there doesn't seem to be a nice way to skip tests defined as TEST(),
since there's no return code (I tried exit(KSFT_SKIP), but that didn't work
either...). So let's do it this way to be consistent, and easier to fix
when someone comes along and fixes it.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/seccomp/seccomp_bpf.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index 83057fa9d391..14cad657bc6a 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -2920,6 +2920,12 @@ TEST(get_metadata)
struct seccomp_metadata md;
long ret;
+ /* Only real root can get metadata. */
+ if (geteuid()) {
+ XFAIL(return, "get_metadata requires real root");
+ return;
+ }
+
ASSERT_EQ(0, pipe(pipefd));
pid = fork();
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 102/187] kprobes: Prohibit probing on bsearch()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (100 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 101/187] selftests: skip seccomp get_metadata test if not real root Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 103/187] kprobes: Prohibit probing on RCU debug routine Greg Kroah-Hartman
` (89 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrea Righi, Masami Hiramatsu,
Alexander Shishkin, Arnaldo Carvalho de Melo, Jiri Olsa,
Linus Torvalds, Mathieu Desnoyers, Peter Zijlstra,
Steven Rostedt, Thomas Gleixner, Ingo Molnar, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 02106f883cd745523f7766d90a739f983f19e650 ]
Since kprobe breakpoing handler is using bsearch(), probing on this
routine can cause recursive breakpoint problem.
int3
->do_int3()
->ftrace_int3_handler()
->ftrace_location()
->ftrace_location_range()
->bsearch() -> int3
Prohibit probing on bsearch().
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998813406.31052.8791425358974650922.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
lib/bsearch.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/lib/bsearch.c b/lib/bsearch.c
index 18b445b010c3..82512fe7b33c 100644
--- a/lib/bsearch.c
+++ b/lib/bsearch.c
@@ -11,6 +11,7 @@
#include <linux/export.h>
#include <linux/bsearch.h>
+#include <linux/kprobes.h>
/*
* bsearch - binary search an array of elements
@@ -53,3 +54,4 @@ void *bsearch(const void *key, const void *base, size_t num, size_t size,
return NULL;
}
EXPORT_SYMBOL(bsearch);
+NOKPROBE_SYMBOL(bsearch);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 103/187] kprobes: Prohibit probing on RCU debug routine
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (101 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 102/187] kprobes: Prohibit probing on bsearch() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 104/187] netfilter: conntrack: fix cloned unconfirmed skb->_nfct race in __nf_conntrack_confirm Greg Kroah-Hartman
` (88 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masami Hiramatsu, Alexander Shishkin,
Andrea Righi, Arnaldo Carvalho de Melo, Jiri Olsa,
Linus Torvalds, Mathieu Desnoyers, Peter Zijlstra,
Steven Rostedt, Thomas Gleixner, Ingo Molnar, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a39f15b9644fac3f950f522c39e667c3af25c588 ]
Since kprobe itself depends on RCU, probing on RCU debug
routine can cause recursive breakpoint bugs.
Prohibit probing on RCU debug routines.
int3
->do_int3()
->ist_enter()
->RCU_LOCKDEP_WARN()
->debug_lockdep_rcu_enabled() -> int3
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998807741.31052.11229157537816341591.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/rcu/update.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index 39cb23d22109..81688a133552 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -52,6 +52,7 @@
#include <linux/tick.h>
#include <linux/rcupdate_wait.h>
#include <linux/sched/isolation.h>
+#include <linux/kprobes.h>
#define CREATE_TRACE_POINTS
@@ -253,6 +254,7 @@ int notrace debug_lockdep_rcu_enabled(void)
current->lockdep_recursion == 0;
}
EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled);
+NOKPROBE_SYMBOL(debug_lockdep_rcu_enabled);
/**
* rcu_read_lock_held() - might we be in RCU read-side critical section?
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 104/187] netfilter: conntrack: fix cloned unconfirmed skb->_nfct race in __nf_conntrack_confirm
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (102 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 103/187] kprobes: Prohibit probing on RCU debug routine Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 105/187] ARM: 8833/1: Ensure that NEON code always compiles with Clang Greg Kroah-Hartman
` (87 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chieh-Min Wang, Pablo Neira Ayuso,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 13f5251fd17088170c18844534682d9cab5ff5aa ]
For bridge(br_flood) or broadcast/multicast packets, they could clone
skb with unconfirmed conntrack which break the rule that unconfirmed
skb->_nfct is never shared. With nfqueue running on my system, the race
can be easily reproduced with following warning calltrace:
[13257.707525] CPU: 0 PID: 12132 Comm: main Tainted: P W 4.4.60 #7744
[13257.707568] Hardware name: Qualcomm (Flattened Device Tree)
[13257.714700] [<c021f6dc>] (unwind_backtrace) from [<c021bce8>] (show_stack+0x10/0x14)
[13257.720253] [<c021bce8>] (show_stack) from [<c0449e10>] (dump_stack+0x94/0xa8)
[13257.728240] [<c0449e10>] (dump_stack) from [<c022a7e0>] (warn_slowpath_common+0x94/0xb0)
[13257.735268] [<c022a7e0>] (warn_slowpath_common) from [<c022a898>] (warn_slowpath_null+0x1c/0x24)
[13257.743519] [<c022a898>] (warn_slowpath_null) from [<c06ee450>] (__nf_conntrack_confirm+0xa8/0x618)
[13257.752284] [<c06ee450>] (__nf_conntrack_confirm) from [<c0772670>] (ipv4_confirm+0xb8/0xfc)
[13257.761049] [<c0772670>] (ipv4_confirm) from [<c06e7a60>] (nf_iterate+0x48/0xa8)
[13257.769725] [<c06e7a60>] (nf_iterate) from [<c06e7af0>] (nf_hook_slow+0x30/0xb0)
[13257.777108] [<c06e7af0>] (nf_hook_slow) from [<c07f20b4>] (br_nf_post_routing+0x274/0x31c)
[13257.784486] [<c07f20b4>] (br_nf_post_routing) from [<c06e7a60>] (nf_iterate+0x48/0xa8)
[13257.792556] [<c06e7a60>] (nf_iterate) from [<c06e7af0>] (nf_hook_slow+0x30/0xb0)
[13257.800458] [<c06e7af0>] (nf_hook_slow) from [<c07e5580>] (br_forward_finish+0x94/0xa4)
[13257.808010] [<c07e5580>] (br_forward_finish) from [<c07f22ac>] (br_nf_forward_finish+0x150/0x1ac)
[13257.815736] [<c07f22ac>] (br_nf_forward_finish) from [<c06e8df0>] (nf_reinject+0x108/0x170)
[13257.824762] [<c06e8df0>] (nf_reinject) from [<c06ea854>] (nfqnl_recv_verdict+0x3d8/0x420)
[13257.832924] [<c06ea854>] (nfqnl_recv_verdict) from [<c06e940c>] (nfnetlink_rcv_msg+0x158/0x248)
[13257.841256] [<c06e940c>] (nfnetlink_rcv_msg) from [<c06e5564>] (netlink_rcv_skb+0x54/0xb0)
[13257.849762] [<c06e5564>] (netlink_rcv_skb) from [<c06e4ec8>] (netlink_unicast+0x148/0x23c)
[13257.858093] [<c06e4ec8>] (netlink_unicast) from [<c06e5364>] (netlink_sendmsg+0x2ec/0x368)
[13257.866348] [<c06e5364>] (netlink_sendmsg) from [<c069fb8c>] (sock_sendmsg+0x34/0x44)
[13257.874590] [<c069fb8c>] (sock_sendmsg) from [<c06a03dc>] (___sys_sendmsg+0x1ec/0x200)
[13257.882489] [<c06a03dc>] (___sys_sendmsg) from [<c06a11c8>] (__sys_sendmsg+0x3c/0x64)
[13257.890300] [<c06a11c8>] (__sys_sendmsg) from [<c0209b40>] (ret_fast_syscall+0x0/0x34)
The original code just triggered the warning but do nothing. It will
caused the shared conntrack moves to the dying list and the packet be
droppped (nf_ct_resolve_clash returns NF_DROP for dying conntrack).
- Reproduce steps:
+----------------------------+
| br0(bridge) |
| |
+-+---------+---------+------+
| eth0| | eth1| | eth2|
| | | | | |
+--+--+ +--+--+ +---+-+
| | |
| | |
+--+-+ +-+--+ +--+-+
| PC1| | PC2| | PC3|
+----+ +----+ +----+
iptables -A FORWARD -m mark --mark 0x1000000/0x1000000 -j NFQUEUE --queue-num 100 --queue-bypass
ps: Our nfq userspace program will set mark on packets whose connection
has already been processed.
PC1 sends broadcast packets simulated by hping3:
hping3 --rand-source --udp 192.168.1.255 -i u100
- Broadcast racing flow chart is as follow:
br_handle_frame
BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, br_handle_frame_finish)
// skb->_nfct (unconfirmed conntrack) is constructed at PRE_ROUTING stage
br_handle_frame_finish
// check if this packet is broadcast
br_flood_forward
br_flood
list_for_each_entry_rcu(p, &br->port_list, list) // iterate through each port
maybe_deliver
deliver_clone
skb = skb_clone(skb)
__br_forward
BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD,...)
// queue in our nfq and received by our userspace program
// goto __nf_conntrack_confirm with process context on CPU 1
br_pass_frame_up
BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,...)
// goto __nf_conntrack_confirm with softirq context on CPU 0
Because conntrack confirm can happen at both INPUT and POSTROUTING
stage. So with NFQUEUE running, skb->_nfct with the same unconfirmed
conntrack could race on different core.
This patch fixes a repeating kernel splat, now it is only displayed
once.
Signed-off-by: Chieh-Min Wang <chiehminw@synology.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_conntrack_core.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 895171a2e1f1..9a249478abf2 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -901,10 +901,18 @@ __nf_conntrack_confirm(struct sk_buff *skb)
* REJECT will give spurious warnings here.
*/
- /* No external references means no one else could have
- * confirmed us.
+ /* Another skb with the same unconfirmed conntrack may
+ * win the race. This may happen for bridge(br_flood)
+ * or broadcast/multicast packets do skb_clone with
+ * unconfirmed conntrack.
*/
- WARN_ON(nf_ct_is_confirmed(ct));
+ if (unlikely(nf_ct_is_confirmed(ct))) {
+ WARN_ON_ONCE(1);
+ nf_conntrack_double_unlock(hash, reply_hash);
+ local_bh_enable();
+ return NF_DROP;
+ }
+
pr_debug("Confirming conntrack %p\n", ct);
/* We have to check the DYING flag after unlink to prevent
* a race against nf_ct_get_next_corpse() possibly called from
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 105/187] ARM: 8833/1: Ensure that NEON code always compiles with Clang
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (103 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 104/187] netfilter: conntrack: fix cloned unconfirmed skb->_nfct race in __nf_conntrack_confirm Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 106/187] ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins Greg Kroah-Hartman
` (86 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ard Biesheuvel, Nathan Chancellor,
Nicolas Pitre, Nick Desaulniers, Stefan Agner, Russell King,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit de9c0d49d85dc563549972edc5589d195cd5e859 ]
While building arm32 allyesconfig, I ran into the following errors:
arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with
'-mfloat-abi=softfp -mfpu=neon'
In file included from lib/raid6/neon1.c:27:
/home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2:
error: "NEON support not enabled"
Building V=1 showed NEON_FLAGS getting passed along to Clang but
__ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang
only defining __ARM_NEON__ when targeting armv7, rather than armv6k,
which is the '-march' value for allyesconfig.
>From lib/Basic/Targets/ARM.cpp in the Clang source:
// This only gets set when Neon instructions are actually available, unlike
// the VFP define, hence the soft float and arch check. This is subtly
// different from gcc, we follow the intent which was that it should be set
// when Neon instructions are actually available.
if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) {
Builder.defineMacro("__ARM_NEON", "1");
Builder.defineMacro("__ARM_NEON__");
// current AArch32 NEON implementations do not support double-precision
// floating-point even when it is present in VFP.
Builder.defineMacro("__ARM_NEON_FP",
"0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP));
}
Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the
beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets
definined by Clang. This doesn't functionally change anything because
that code will only run where NEON is supported, which is implicitly
armv7.
Link: https://github.com/ClangBuiltLinux/linux/issues/287
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/arm/kernel_mode_neon.txt | 4 ++--
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/xor-neon.c | 2 +-
lib/raid6/Makefile | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/arm/kernel_mode_neon.txt b/Documentation/arm/kernel_mode_neon.txt
index 525452726d31..b9e060c5b61e 100644
--- a/Documentation/arm/kernel_mode_neon.txt
+++ b/Documentation/arm/kernel_mode_neon.txt
@@ -6,7 +6,7 @@ TL;DR summary
* Use only NEON instructions, or VFP instructions that don't rely on support
code
* Isolate your NEON code in a separate compilation unit, and compile it with
- '-mfpu=neon -mfloat-abi=softfp'
+ '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
NEON code
* Don't sleep in your NEON code, and be aware that it will be executed with
@@ -87,7 +87,7 @@ instructions appearing in unexpected places if no special care is taken.
Therefore, the recommended and only supported way of using NEON/VFP in the
kernel is by adhering to the following rules:
* isolate the NEON code in a separate compilation unit and compile it with
- '-mfpu=neon -mfloat-abi=softfp';
+ '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
into the unit containing the NEON code from a compilation unit which is *not*
built with the GCC flag '-mfpu=neon' set.
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index ad25fd1872c7..0bff0176db2c 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -39,7 +39,7 @@ $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
- NEON_FLAGS := -mfloat-abi=softfp -mfpu=neon
+ NEON_FLAGS := -march=armv7-a -mfloat-abi=softfp -mfpu=neon
CFLAGS_xor-neon.o += $(NEON_FLAGS)
obj-$(CONFIG_XOR_BLOCKS) += xor-neon.o
endif
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index 2c40aeab3eaa..c691b901092f 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -14,7 +14,7 @@
MODULE_LICENSE("GPL");
#ifndef __ARM_NEON__
-#error You should compile this file with '-mfloat-abi=softfp -mfpu=neon'
+#error You should compile this file with '-march=armv7-a -mfloat-abi=softfp -mfpu=neon'
#endif
/*
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
index 7ed43eaa02ef..5e0d55c54100 100644
--- a/lib/raid6/Makefile
+++ b/lib/raid6/Makefile
@@ -40,7 +40,7 @@ endif
ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
NEON_FLAGS := -ffreestanding
ifeq ($(ARCH),arm)
-NEON_FLAGS += -mfloat-abi=softfp -mfpu=neon
+NEON_FLAGS += -march=armv7-a -mfloat-abi=softfp -mfpu=neon
endif
CFLAGS_recov_neon_inner.o += $(NEON_FLAGS)
ifeq ($(ARCH),arm64)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 106/187] ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (104 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 105/187] ARM: 8833/1: Ensure that NEON code always compiles with Clang Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 107/187] ALSA: PCM: check if ops are defined before suspending PCM Greg Kroah-Hartman
` (85 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Martin Blumenstingl,
Emiliano Ingrassia, Linus Lüssing, Kevin Hilman,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 29f0023d01f063feacfc404f0446905aee4f82ee ]
According to the Odroid-C1+ schematics the Ethernet TXD1 signal is
routed to GPIOH_5 and the TXD0 signal is routed to GPIOH_6.
The public S805 datasheet shows that TXD0 can be routed to DIF_2_P and
TXD1 can be routed to DIF_2_N instead.
The pin groups eth_txd0_0 (GPIOH_6) and eth_txd0_1 (DIF_2_P) are both
configured as Ethernet TXD0 and TXD1 data lines in meson8b.dtsi. At the
same time eth_txd1_0 (GPIOH_5) and eth_txd1_1 (DIF_2_N) are configured
as TXD0 and TXD1 data lines as well.
This results in a bad Ethernet receive performance. Presumably this is
due to the eth_txd0 and eth_txd1 signal being routed to the wrong pins.
As a result of that data can only be transmitted on eth_txd2 and
eth_txd3. However, I have no scope to fully confirm this assumption.
The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit 0: eth_rxd1 (DIF_0_P)
- register 6 bit 1: eth_rxd0 (DIF_0_N)
- register 6 bit 2: eth_rx_dv (DIF_1_P)
- register 6 bit 3: eth_rx_clk (DIF_1_N)
- register 6 bit 6: eth_tx_en (DIF_3_P)
- register 6 bit 8: eth_ref_clk (DIF_3_N)
- register 6 bit 9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)
Drop the eth_txd0_1 and eth_txd1_1 groups from eth_rgmii_pins to fix the
Ethernet transmit performance on Odroid-C1. Also add the eth_rxd2 and
eth_rxd3 groups so we don't rely on the bootloader to set them up.
iperf3 statistics before this change:
- transmitting from Odroid-C1: 741 Mbits/sec (0 retries)
- receiving on Odroid-C1: 199 Mbits/sec (1713 retries)
iperf3 statistics after this change:
- transmitting from Odroid-C1: 667 Mbits/sec (0 retries)
- receiving on Odroid-C1: 750 Mbits/sec (0 retries)
Fixes: b96446541d8390 ("ARM: dts: meson8b: extend ethernet controller description")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Emiliano Ingrassia <ingrassia@epigenesys.com>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Reviewed-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/meson8b.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 08f7f6be7254..5b3e5c50c72f 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -207,9 +207,7 @@
groups = "eth_tx_clk",
"eth_tx_en",
"eth_txd1_0",
- "eth_txd1_1",
"eth_txd0_0",
- "eth_txd0_1",
"eth_rx_clk",
"eth_rx_dv",
"eth_rxd1",
@@ -218,7 +216,9 @@
"eth_mdc",
"eth_ref_clk",
"eth_txd2",
- "eth_txd3";
+ "eth_txd3",
+ "eth_rxd3",
+ "eth_rxd2";
function = "ethernet";
};
};
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 107/187] ALSA: PCM: check if ops are defined before suspending PCM
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (105 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 106/187] ARM: dts: meson8b: fix the Ethernet data line signals in eth_rgmii_pins Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 108/187] ath10k: fix shadow register implementation for WCN3990 Greg Kroah-Hartman
` (84 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ranjani Sridharan,
Pierre-Louis Bossart, Takashi Iwai, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d9c0b2afe820fa3b3f8258a659daee2cc71ca3ef ]
BE dai links only have internal PCM's and their substream ops may
not be set. Suspending these PCM's will result in their
ops->trigger() being invoked and cause a kernel oops.
So skip suspending PCM's if their ops are NULL.
[ NOTE: this change is required now for following the recent PCM core
change to get rid of snd_pcm_suspend() call. Since DPCM BE takes
the runtime carried from FE while keeping NULL ops, it can hit this
bug. See details at:
https://github.com/thesofproject/linux/pull/582
-- tiwai ]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/core/pcm_native.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index b67f6fe08a1b..e08c6c6ca029 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1513,6 +1513,14 @@ int snd_pcm_suspend_all(struct snd_pcm *pcm)
/* FIXME: the open/close code should lock this as well */
if (substream->runtime == NULL)
continue;
+
+ /*
+ * Skip BE dai link PCM's that are internal and may
+ * not have their substream ops set.
+ */
+ if (!substream->ops)
+ continue;
+
err = snd_pcm_suspend(substream);
if (err < 0 && err != -EBUSY)
return err;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 108/187] ath10k: fix shadow register implementation for WCN3990
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (106 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 107/187] ALSA: PCM: check if ops are defined before suspending PCM Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 109/187] usb: f_fs: Avoid crash due to out-of-scope stack ptr access Greg Kroah-Hartman
` (83 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rakesh Pillai, Kalle Valo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1863008369ae0407508033b4b00f98b985adeb15 ]
WCN3990 supports shadow registers write operation support
for copy engine for regular operation in powersave mode.
Since WCN3990 is a 64-bit target, the shadow register
implementation needs to be done in the copy engine handlers
for 64-bit target. Currently the shadow register implementation
is present in the 32-bit target handlers of copy engine.
Fix the shadow register copy engine write operation
implementation for 64-bit target(WCN3990).
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Fixes: b7ba83f7c414 ("ath10k: add support for shadow register for WNC3990")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/ce.c | 26 +++++++++++++-------------
drivers/net/wireless/ath/ath10k/ce.h | 2 +-
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 18c709c484e7..f761d651c16e 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -500,14 +500,8 @@ static int _ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
write_index = CE_RING_IDX_INCR(nentries_mask, write_index);
/* WORKAROUND */
- if (!(flags & CE_SEND_FLAG_GATHER)) {
- if (ar->hw_params.shadow_reg_support)
- ath10k_ce_shadow_src_ring_write_index_set(ar, ce_state,
- write_index);
- else
- ath10k_ce_src_ring_write_index_set(ar, ctrl_addr,
- write_index);
- }
+ if (!(flags & CE_SEND_FLAG_GATHER))
+ ath10k_ce_src_ring_write_index_set(ar, ctrl_addr, write_index);
src_ring->write_index = write_index;
exit:
@@ -581,8 +575,14 @@ static int _ath10k_ce_send_nolock_64(struct ath10k_ce_pipe *ce_state,
/* Update Source Ring Write Index */
write_index = CE_RING_IDX_INCR(nentries_mask, write_index);
- if (!(flags & CE_SEND_FLAG_GATHER))
- ath10k_ce_src_ring_write_index_set(ar, ctrl_addr, write_index);
+ if (!(flags & CE_SEND_FLAG_GATHER)) {
+ if (ar->hw_params.shadow_reg_support)
+ ath10k_ce_shadow_src_ring_write_index_set(ar, ce_state,
+ write_index);
+ else
+ ath10k_ce_src_ring_write_index_set(ar, ctrl_addr,
+ write_index);
+ }
src_ring->write_index = write_index;
exit:
@@ -1394,12 +1394,12 @@ static int ath10k_ce_alloc_shadow_base(struct ath10k *ar,
u32 nentries)
{
src_ring->shadow_base_unaligned = kcalloc(nentries,
- sizeof(struct ce_desc),
+ sizeof(struct ce_desc_64),
GFP_KERNEL);
if (!src_ring->shadow_base_unaligned)
return -ENOMEM;
- src_ring->shadow_base = (struct ce_desc *)
+ src_ring->shadow_base = (struct ce_desc_64 *)
PTR_ALIGN(src_ring->shadow_base_unaligned,
CE_DESC_RING_ALIGN);
return 0;
@@ -1453,7 +1453,7 @@ ath10k_ce_alloc_src_ring(struct ath10k *ar, unsigned int ce_id,
ret = ath10k_ce_alloc_shadow_base(ar, src_ring, nentries);
if (ret) {
dma_free_coherent(ar->dev,
- (nentries * sizeof(struct ce_desc) +
+ (nentries * sizeof(struct ce_desc_64) +
CE_DESC_RING_ALIGN),
src_ring->base_addr_owner_space_unaligned,
base_addr);
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index b8fb5382dede..8088f7a66426 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -118,7 +118,7 @@ struct ath10k_ce_ring {
u32 base_addr_ce_space;
char *shadow_base_unaligned;
- struct ce_desc *shadow_base;
+ struct ce_desc_64 *shadow_base;
/* keep last */
void *per_transfer_context[0];
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 109/187] usb: f_fs: Avoid crash due to out-of-scope stack ptr access
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (107 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 108/187] ath10k: fix shadow register implementation for WCN3990 Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 110/187] sched/topology: Fix percpu data types in struct sd_data & struct s_data Greg Kroah-Hartman
` (82 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alan Stern, Felipe Balbi, Zeng Tao,
Jack Pham, Thinh Nguyen, Chen Yu, Jerry Zhang,
Lars-Peter Clausen, Vincent Pelletier, Andrzej Pietrasiewicz,
Linux USB List, John Stultz, Felipe Balbi, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 54f64d5c983f939901dacc8cfc0983727c5c742e ]
Since the 5.0 merge window opened, I've been seeing frequent
crashes on suspend and reboot with the trace:
[ 36.911170] Unable to handle kernel paging request at virtual address ffffff801153d660
[ 36.912769] Unable to handle kernel paging request at virtual address ffffff800004b564
...
[ 36.950666] Call trace:
[ 36.950670] queued_spin_lock_slowpath+0x1cc/0x2c8
[ 36.950681] _raw_spin_lock_irqsave+0x64/0x78
[ 36.950692] complete+0x28/0x70
[ 36.950703] ffs_epfile_io_complete+0x3c/0x50
[ 36.950713] usb_gadget_giveback_request+0x34/0x108
[ 36.950721] dwc3_gadget_giveback+0x50/0x68
[ 36.950723] dwc3_thread_interrupt+0x358/0x1488
[ 36.950731] irq_thread_fn+0x30/0x88
[ 36.950734] irq_thread+0x114/0x1b0
[ 36.950739] kthread+0x104/0x130
[ 36.950747] ret_from_fork+0x10/0x1c
I isolated this down to in ffs_epfile_io():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/gadget/function/f_fs.c#n1065
Where the completion done is setup on the stack:
DECLARE_COMPLETION_ONSTACK(done);
Then later we setup a request and queue it, and wait for it:
if (unlikely(wait_for_completion_interruptible(&done))) {
/*
* To avoid race condition with ffs_epfile_io_complete,
* dequeue the request first then check
* status. usb_ep_dequeue API should guarantee no race
* condition with req->complete callback.
*/
usb_ep_dequeue(ep->ep, req);
interrupted = ep->status < 0;
}
The problem is, that we end up being interrupted, dequeue the
request, and exit.
But then the irq triggers and we try calling complete() on the
context pointer which points to now random stack space, which
results in the panic.
Alan Stern pointed out there is a bug here, in that the snippet
above "assumes that usb_ep_dequeue() waits until the request has
been completed." And that:
wait_for_completion(&done);
Is needed right after the usb_ep_dequeue().
Thus this patch implements that change. With it I no longer see
the crashes on suspend or reboot.
This issue seems to have been uncovered by behavioral changes in
the dwc3 driver in commit fec9095bdef4e ("usb: dwc3: gadget:
remove wait_end_transfer").
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Thinh Nguyen <thinh.nguyen@synopsys.com>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Vincent Pelletier <plr.vincent@gmail.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linux USB List <linux-usb@vger.kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/gadget/function/f_fs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 31e8bf3578c8..aa15593a3ac4 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1008,6 +1008,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
* condition with req->complete callback.
*/
usb_ep_dequeue(ep->ep, req);
+ wait_for_completion(&done);
interrupted = ep->status < 0;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 110/187] sched/topology: Fix percpu data types in struct sd_data & struct s_data
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (108 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 109/187] usb: f_fs: Avoid crash due to out-of-scope stack ptr access Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 111/187] bcache: fix input overflow to cache set sysfs file io_error_halflife Greg Kroah-Hartman
` (81 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Luc Van Oostenryck,
Peter Zijlstra (Intel),
Linus Torvalds, Thomas Gleixner, Ingo Molnar, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 99687cdbb3f6c8e32bcc7f37496e811f30460e48 ]
The percpu members of struct sd_data and s_data are declared as:
struct ... ** __percpu member;
So their type is:
__percpu pointer to pointer to struct ...
But looking at how they're used, their type should be:
pointer to __percpu pointer to struct ...
and they should thus be declared as:
struct ... * __percpu *member;
So fix the placement of '__percpu' in the definition of these
structures.
This addresses a bunch of Sparse's warnings like:
warning: incorrect type in initializer (different address spaces)
expected void const [noderef] <asn:3> *__vpp_verify
got struct sched_domain **
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190118144936.79158-1-luc.vanoostenryck@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/sched/topology.h | 8 ++++----
kernel/sched/topology.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/linux/sched/topology.h b/include/linux/sched/topology.h
index 26347741ba50..15f3f61f7e3b 100644
--- a/include/linux/sched/topology.h
+++ b/include/linux/sched/topology.h
@@ -177,10 +177,10 @@ typedef int (*sched_domain_flags_f)(void);
#define SDTL_OVERLAP 0x01
struct sd_data {
- struct sched_domain **__percpu sd;
- struct sched_domain_shared **__percpu sds;
- struct sched_group **__percpu sg;
- struct sched_group_capacity **__percpu sgc;
+ struct sched_domain *__percpu *sd;
+ struct sched_domain_shared *__percpu *sds;
+ struct sched_group *__percpu *sg;
+ struct sched_group_capacity *__percpu *sgc;
};
struct sched_domain_topology_level {
diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
index 505a41c42b96..c0a751464971 100644
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -477,7 +477,7 @@ cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu)
}
struct s_data {
- struct sched_domain ** __percpu sd;
+ struct sched_domain * __percpu *sd;
struct root_domain *rd;
};
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 111/187] bcache: fix input overflow to cache set sysfs file io_error_halflife
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (109 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 110/187] sched/topology: Fix percpu data types in struct sd_data & struct s_data Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 112/187] bcache: fix input overflow to sequential_cutoff Greg Kroah-Hartman
` (80 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Coly Li, Jens Axboe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a91fbda49f746119828f7e8ad0f0aa2ab0578f65 ]
Cache set sysfs entry io_error_halflife is used to set c->error_decay.
c->error_decay is in type unsigned int, and it is converted by
strtoul_or_return(), therefore overflow to c->error_decay is possible
for a large input value.
This patch fixes the overflow by using strtoul_safe_clamp() to convert
input string to an unsigned long value in range [0, UINT_MAX], then
divides by 88 and set it to c->error_decay.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/sysfs.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 26f035a0c5b9..59bf13faf752 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -766,8 +766,17 @@ STORE(__bch_cache_set)
c->error_limit = strtoul_or_return(buf);
/* See count_io_errors() for why 88 */
- if (attr == &sysfs_io_error_halflife)
- c->error_decay = strtoul_or_return(buf) / 88;
+ if (attr == &sysfs_io_error_halflife) {
+ unsigned long v = 0;
+ ssize_t ret;
+
+ ret = strtoul_safe_clamp(buf, v, 0, UINT_MAX);
+ if (!ret) {
+ c->error_decay = v / 88;
+ return size;
+ }
+ return ret;
+ }
if (attr == &sysfs_io_disable) {
v = strtoul_or_return(buf);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 112/187] bcache: fix input overflow to sequential_cutoff
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (110 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 111/187] bcache: fix input overflow to cache set sysfs file io_error_halflife Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 113/187] bcache: fix potential div-zero error of writeback_rate_i_term_inverse Greg Kroah-Hartman
` (79 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Coly Li, Jens Axboe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8c27a3953e92eb0b22dbb03d599f543a05f9574e ]
People may set sequential_cutoff of a cached device via sysfs file,
but current code does not check input value overflow. E.g. if value
4294967295 (UINT_MAX) is written to file sequential_cutoff, its value
is 4GB, but if 4294967296 (UINT_MAX + 1) is written into, its value
will be 0. This is an unexpected behavior.
This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert
input string to unsigned integer value, and limit its range in
[0, UINT_MAX]. Then the input overflow can be fixed.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/sysfs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 59bf13faf752..01c7c4452a26 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -295,7 +295,9 @@ STORE(__cached_dev)
dc->io_disable = v ? 1 : 0;
}
- d_strtoi_h(sequential_cutoff);
+ sysfs_strtoul_clamp(sequential_cutoff,
+ dc->sequential_cutoff,
+ 0, UINT_MAX);
d_strtoi_h(readahead);
if (attr == &sysfs_clear_stats)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 113/187] bcache: fix potential div-zero error of writeback_rate_i_term_inverse
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (111 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 112/187] bcache: fix input overflow to sequential_cutoff Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 114/187] bcache: improve sysfs_strtoul_clamp() Greg Kroah-Hartman
` (78 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Coly Li, Jens Axboe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c3b75a2199cdbfc1c335155fe143d842604b1baa ]
dc->writeback_rate_i_term_inverse can be set via sysfs interface. It is
in type unsigned int, and convert from input string by d_strtoul(). The
problem is d_strtoul() does not check valid range of the input, if
4294967296 is written into sysfs file writeback_rate_i_term_inverse,
an overflow of unsigned integer will happen and value 0 is set to
dc->writeback_rate_i_term_inverse.
In writeback.c:__update_writeback_rate(), there are following lines of
code,
integral_scaled = div_s64(dc->writeback_rate_integral,
dc->writeback_rate_i_term_inverse);
If dc->writeback_rate_i_term_inverse is set to 0 via sysfs interface,
a div-zero error might be triggered in the above code.
Therefore we need to add a range limitation in the sysfs interface,
this is what this patch does, use sysfs_stroul_clamp() to replace
d_strtoul() and restrict the input range in [1, UINT_MAX].
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/sysfs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 01c7c4452a26..503ad954ccc0 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -283,7 +283,9 @@ STORE(__cached_dev)
sysfs_strtoul_clamp(writeback_rate_update_seconds,
dc->writeback_rate_update_seconds,
1, WRITEBACK_RATE_UPDATE_SECS_MAX);
- d_strtoul(writeback_rate_i_term_inverse);
+ sysfs_strtoul_clamp(writeback_rate_i_term_inverse,
+ dc->writeback_rate_i_term_inverse,
+ 1, UINT_MAX);
d_strtoul_nonzero(writeback_rate_p_term_inverse);
d_strtoul_nonzero(writeback_rate_minimum);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 114/187] bcache: improve sysfs_strtoul_clamp()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (112 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 113/187] bcache: fix potential div-zero error of writeback_rate_i_term_inverse Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 115/187] genirq: Avoid summation loops for /proc/stat Greg Kroah-Hartman
` (77 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Coly Li, Jens Axboe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 596b5a5dd1bc2fa019fdaaae522ef331deef927f ]
Currently sysfs_strtoul_clamp() is defined as,
82 #define sysfs_strtoul_clamp(file, var, min, max) \
83 do { \
84 if (attr == &sysfs_ ## file) \
85 return strtoul_safe_clamp(buf, var, min, max) \
86 ?: (ssize_t) size; \
87 } while (0)
The problem is, if bit width of var is less then unsigned long, min and
max may not protect var from integer overflow, because overflow happens
in strtoul_safe_clamp() before checking min and max.
To fix such overflow in sysfs_strtoul_clamp(), to make min and max take
effect, this patch adds an unsigned long variable, and uses it to macro
strtoul_safe_clamp() to convert an unsigned long value in range defined
by [min, max]. Then assign this value to var. By this method, if bit
width of var is less than unsigned long, integer overflow won't happen
before min and max are checking.
Now sysfs_strtoul_clamp() can properly handle smaller data type like
unsigned int, of cause min and max should be defined in range of
unsigned int too.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/sysfs.h | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/md/bcache/sysfs.h b/drivers/md/bcache/sysfs.h
index 3fe82425859c..0ad2715a884e 100644
--- a/drivers/md/bcache/sysfs.h
+++ b/drivers/md/bcache/sysfs.h
@@ -81,9 +81,16 @@ do { \
#define sysfs_strtoul_clamp(file, var, min, max) \
do { \
- if (attr == &sysfs_ ## file) \
- return strtoul_safe_clamp(buf, var, min, max) \
- ?: (ssize_t) size; \
+ if (attr == &sysfs_ ## file) { \
+ unsigned long v = 0; \
+ ssize_t ret; \
+ ret = strtoul_safe_clamp(buf, v, min, max); \
+ if (!ret) { \
+ var = v; \
+ return size; \
+ } \
+ return ret; \
+ } \
} while (0)
#define strtoul_or_return(cp) \
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 115/187] genirq: Avoid summation loops for /proc/stat
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (113 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 114/187] bcache: improve sysfs_strtoul_clamp() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 116/187] net: marvell: mvpp2: fix stuck in-band SGMII negotiation Greg Kroah-Hartman
` (76 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Waiman Long, Thomas Gleixner,
Marc Zyngier, Davidlohr Bueso, Matthew Wilcox, Andrew Morton,
Alexey Dobriyan, Kees Cook, linux-fsdevel, Davidlohr Bueso,
Miklos Szeredi, Daniel Colascione, Dave Chinner, Randy Dunlap,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1136b0728969901a091f0471968b2b76ed14d9ad ]
Waiman reported that on large systems with a large amount of interrupts the
readout of /proc/stat takes a long time to sum up the interrupt
statistics. In principle this is not a problem. but for unknown reasons
some enterprise quality software reads /proc/stat with a high frequency.
The reason for this is that interrupt statistics are accounted per cpu. So
the /proc/stat logic has to sum up the interrupt stats for each interrupt.
This can be largely avoided for interrupts which are not marked as
'PER_CPU' interrupts by simply adding a per interrupt summation counter
which is incremented along with the per interrupt per cpu counter.
The PER_CPU interrupts need to avoid that and use only per cpu accounting
because they share the interrupt number and the interrupt descriptor and
concurrent updates would conflict or require unwanted synchronization.
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20190208135020.925487496@linutronix.de
8<-------------
v2: Undo the unintentional layout change of struct irq_desc.
include/linux/irqdesc.h | 1 +
kernel/irq/chip.c | 12 ++++++++++--
kernel/irq/internals.h | 8 +++++++-
kernel/irq/irqdesc.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/irqdesc.h | 1 +
kernel/irq/chip.c | 12 ++++++++++--
kernel/irq/internals.h | 8 +++++++-
kernel/irq/irqdesc.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index dd1e40ddac7d..875c41b23f20 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -65,6 +65,7 @@ struct irq_desc {
unsigned int core_internal_state__do_not_mess_with_it;
unsigned int depth; /* nested irq disables */
unsigned int wake_depth; /* nested wake enables */
+ unsigned int tot_count;
unsigned int irq_count; /* For detecting broken IRQs */
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index a2b3d9de999c..811009ebacd4 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -855,7 +855,11 @@ void handle_percpu_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
- kstat_incr_irqs_this_cpu(desc);
+ /*
+ * PER CPU interrupts are not serialized. Do not touch
+ * desc->tot_count.
+ */
+ __kstat_incr_irqs_this_cpu(desc);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
@@ -884,7 +888,11 @@ void handle_percpu_devid_irq(struct irq_desc *desc)
unsigned int irq = irq_desc_get_irq(desc);
irqreturn_t res;
- kstat_incr_irqs_this_cpu(desc);
+ /*
+ * PER CPU interrupts are not serialized. Do not touch
+ * desc->tot_count.
+ */
+ __kstat_incr_irqs_this_cpu(desc);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index ca6afa267070..e74e7eea76cf 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -242,12 +242,18 @@ static inline void irq_state_set_masked(struct irq_desc *desc)
#undef __irqd_to_state
-static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
+static inline void __kstat_incr_irqs_this_cpu(struct irq_desc *desc)
{
__this_cpu_inc(*desc->kstat_irqs);
__this_cpu_inc(kstat.irqs_sum);
}
+static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
+{
+ __kstat_incr_irqs_this_cpu(desc);
+ desc->tot_count++;
+}
+
static inline int irq_desc_get_node(struct irq_desc *desc)
{
return irq_common_data_get_node(&desc->irq_common_data);
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 578d0e5f1b5b..ba454cba4069 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -119,6 +119,7 @@ static void desc_set_defaults(unsigned int irq, struct irq_desc *desc, int node,
desc->depth = 1;
desc->irq_count = 0;
desc->irqs_unhandled = 0;
+ desc->tot_count = 0;
desc->name = NULL;
desc->owner = owner;
for_each_possible_cpu(cpu)
@@ -915,11 +916,15 @@ unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
unsigned int kstat_irqs(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
- int cpu;
unsigned int sum = 0;
+ int cpu;
if (!desc || !desc->kstat_irqs)
return 0;
+ if (!irq_settings_is_per_cpu_devid(desc) &&
+ !irq_settings_is_per_cpu(desc))
+ return desc->tot_count;
+
for_each_possible_cpu(cpu)
sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
return sum;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 116/187] net: marvell: mvpp2: fix stuck in-band SGMII negotiation
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (114 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 115/187] genirq: Avoid summation loops for /proc/stat Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 117/187] iw_cxgb4: fix srqidx leak during connection abort Greg Kroah-Hartman
` (75 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sven Auhagen, Russell King,
David S. Miller, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 316734fdcf70900a83065360cff11a5826919067 ]
It appears that the mvpp22 can get stuck with SGMII negotiation. The
symptoms are that in-band negotiation never completes and the partner
(eg, PHY) never reports SGMII link up, or if it supports negotiation
bypass, goes into negotiation bypass mode (which will happen when the
PHY sees that the MAC is alive but gets no response.)
Triggering the PHY end of the link to re-negotiate results in the
bypass bit clearing on the PHY, and then re-setting - indicating that
the problem is at the mvpp22 GMAC end.
Asserting the GMAC reset and de-asserting it resolves the issue.
Arrange to assert the GMAC reset at probe time, and deassert it only
after we have configured the GMAC for the appropriate mode. This
resolves the issue.
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index f8e4808a8317..9988c89ed9fd 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1372,13 +1372,9 @@ static void mvpp2_port_reset(struct mvpp2_port *port)
for (i = 0; i < ARRAY_SIZE(mvpp2_ethtool_regs); i++)
mvpp2_read_count(port, &mvpp2_ethtool_regs[i]);
- val = readl(port->base + MVPP2_GMAC_CTRL_2_REG) &
- ~MVPP2_GMAC_PORT_RESET_MASK;
+ val = readl(port->base + MVPP2_GMAC_CTRL_2_REG) |
+ MVPP2_GMAC_PORT_RESET_MASK;
writel(val, port->base + MVPP2_GMAC_CTRL_2_REG);
-
- while (readl(port->base + MVPP2_GMAC_CTRL_2_REG) &
- MVPP2_GMAC_PORT_RESET_MASK)
- continue;
}
/* Change maximum receive size of the port */
@@ -4445,12 +4441,15 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
const struct phylink_link_state *state)
{
u32 an, ctrl0, ctrl2, ctrl4;
+ u32 old_ctrl2;
an = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
ctrl0 = readl(port->base + MVPP2_GMAC_CTRL_0_REG);
ctrl2 = readl(port->base + MVPP2_GMAC_CTRL_2_REG);
ctrl4 = readl(port->base + MVPP22_GMAC_CTRL_4_REG);
+ old_ctrl2 = ctrl2;
+
/* Force link down */
an &= ~MVPP2_GMAC_FORCE_LINK_PASS;
an |= MVPP2_GMAC_FORCE_LINK_DOWN;
@@ -4523,6 +4522,12 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
writel(ctrl2, port->base + MVPP2_GMAC_CTRL_2_REG);
writel(ctrl4, port->base + MVPP22_GMAC_CTRL_4_REG);
writel(an, port->base + MVPP2_GMAC_AUTONEG_CONFIG);
+
+ if (old_ctrl2 & MVPP2_GMAC_PORT_RESET_MASK) {
+ while (readl(port->base + MVPP2_GMAC_CTRL_2_REG) &
+ MVPP2_GMAC_PORT_RESET_MASK)
+ continue;
+ }
}
static void mvpp2_mac_config(struct net_device *dev, unsigned int mode,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 117/187] iw_cxgb4: fix srqidx leak during connection abort
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (115 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 116/187] net: marvell: mvpp2: fix stuck in-band SGMII negotiation Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 118/187] net: phy: consider latched link-down status in polling mode Greg Kroah-Hartman
` (74 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Raju Rangoju, Jason Gunthorpe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f368ff188ae4b3ef6f740a15999ea0373261b619 ]
When an application aborts the connection by moving QP from RTS to ERROR,
then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the
*srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the
connection by calling c4iw_ep_disconnect().
c4iw_ep_disconnect() does the following:
1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4.
2. sends abort request CPL to hw.
But, since the close_complete_upcall() is sent before sending the
ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the
connection holds one. Because, the srqidx is passed up to libcxgb4 only
after corresponding ABORT_RPL is processed by kernel in abort_rpl().
This patch handle the corner-case by moving the call to
close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl(). So that
libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and
libcxgb4 can relinquish the srqidx properly.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/cxgb4/cm.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 0f83cbec33f3..a68569ec86bf 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1904,8 +1904,10 @@ static int abort_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
}
mutex_unlock(&ep->com.mutex);
- if (release)
+ if (release) {
+ close_complete_upcall(ep, -ECONNRESET);
release_ep_resources(ep);
+ }
c4iw_put_ep(&ep->com);
return 0;
}
@@ -3608,7 +3610,6 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
if (close) {
if (abrupt) {
set_bit(EP_DISC_ABORT, &ep->com.history);
- close_complete_upcall(ep, -ECONNRESET);
ret = send_abort(ep);
} else {
set_bit(EP_DISC_CLOSE, &ep->com.history);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 118/187] net: phy: consider latched link-down status in polling mode
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (116 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 117/187] iw_cxgb4: fix srqidx leak during connection abort Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 119/187] fbdev: fbmem: fix memory access if logo is bigger than the screen Greg Kroah-Hartman
` (73 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Heiner Kallweit, David S. Miller,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 93c0970493c71f264e6c3c7caf1ff24a9e1de786 ]
The link status value latches link-down events. To get the current
status we read the register twice in genphy_update_link(). There's
a potential risk that we miss a link-down event in polling mode.
This may cause issues if the user e.g. connects his machine to a
different network.
On the other hand reading the latched value may cause issues in
interrupt mode. Following scenario:
- After boot link goes up
- phy_start() is called triggering an aneg restart, hence link goes
down and link-down info is latched.
- After aneg has finished link goes up and triggers an interrupt.
Interrupt handler reads link status, means it reads the latched
"link is down" info. But there won't be another interrupt as long
as link stays up, therefore phylib will never recognize that link
is up.
Deal with both scenarios by reading the register twice in interrupt
mode only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/phy-c45.c | 10 ++++++++--
drivers/net/phy/phy_device.c | 13 +++++++++----
2 files changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index e1225545362d..0ba3607585bd 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -147,9 +147,15 @@ int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask)
mmd_mask &= ~BIT(devad);
/* The link state is latched low so that momentary link
- * drops can be detected. Do not double-read the status
- * register if the link is down.
+ * drops can be detected. Do not double-read the status
+ * in polling mode to detect such short link drops.
*/
+ if (!phy_polling_mode(phydev)) {
+ val = phy_read_mmd(phydev, devad, MDIO_STAT1);
+ if (val < 0)
+ return val;
+ }
+
val = phy_read_mmd(phydev, devad, MDIO_STAT1);
if (val < 0)
return val;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 2c32c795f5dd..8a96d985a52f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1503,10 +1503,15 @@ int genphy_update_link(struct phy_device *phydev)
{
int status;
- /* Do a fake read */
- status = phy_read(phydev, MII_BMSR);
- if (status < 0)
- return status;
+ /* The link state is latched low so that momentary link
+ * drops can be detected. Do not double-read the status
+ * in polling mode to detect such short link drops.
+ */
+ if (!phy_polling_mode(phydev)) {
+ status = phy_read(phydev, MII_BMSR);
+ if (status < 0)
+ return status;
+ }
/* Read link and autonegotiation status */
status = phy_read(phydev, MII_BMSR);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 119/187] fbdev: fbmem: fix memory access if logo is bigger than the screen
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (117 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 118/187] net: phy: consider latched link-down status in polling mode Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 120/187] cdrom: Fix race condition in cdrom_sysctl_register Greg Kroah-Hartman
` (72 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manfred Schlaegl, Martin Kepplinger,
Daniel Vetter, Bartlomiej Zolnierkiewicz, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a5399db139cb3ad9b8502d8b1bd02da9ce0b9df0 ]
There is no clipping on the x or y axis for logos larger that the framebuffer
size. Therefore: a logo bigger than screen size leads to invalid memory access:
[ 1.254664] Backtrace:
[ 1.254728] [<c02714e0>] (cfb_imageblit) from [<c026184c>] (fb_show_logo+0x620/0x684)
[ 1.254763] r10:00000003 r9:00027fd8 r8:c6a40000 r7:c6a36e50 r6:00000000 r5:c06b81e4
[ 1.254774] r4:c6a3e800
[ 1.254810] [<c026122c>] (fb_show_logo) from [<c026c1e4>] (fbcon_switch+0x3fc/0x46c)
[ 1.254842] r10:c6a3e824 r9:c6a3e800 r8:00000000 r7:c6a0c000 r6:c070b014 r5:c6a3e800
[ 1.254852] r4:c6808c00
[ 1.254889] [<c026bde8>] (fbcon_switch) from [<c029c8f8>] (redraw_screen+0xf0/0x1e8)
[ 1.254918] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c070d5a0 r5:00000080
[ 1.254928] r4:c6808c00
[ 1.254961] [<c029c808>] (redraw_screen) from [<c029d264>] (do_bind_con_driver+0x194/0x2e4)
[ 1.254991] r9:00000000 r8:00000000 r7:00000014 r6:c070d5a0 r5:c070d5a0 r4:c070d5a0
So prevent displaying a logo bigger than screen size and avoid invalid
memory access.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/core/fbmem.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 77cee99fc36c..c48f083d522a 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -427,6 +427,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
{
unsigned int x;
+ if (image->width > info->var.xres || image->height > info->var.yres)
+ return;
+
if (rotate == FB_ROTATE_UR) {
for (x = 0;
x < num && image->dx + image->width <= info->var.xres;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 120/187] cdrom: Fix race condition in cdrom_sysctl_register
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (118 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 119/187] fbdev: fbmem: fix memory access if logo is bigger than the screen Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 121/187] drm: rcar-du: add missing of_node_put Greg Kroah-Hartman
` (71 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Jens Axboe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f25191bb322dec8fa2979ecb8235643aa42470e1 ]
The following traceback is sometimes seen when booting an image in qemu:
[ 54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 54.611085] Fusion MPT base driver 3.04.20
[ 54.611877] Copyright (c) 1999-2008 LSI Corporation
[ 54.616234] Fusion MPT SAS Host driver 3.04.20
[ 54.635139] sysctl duplicate entry: /dev/cdrom//info
[ 54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1
[ 54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 54.641273] Workqueue: events_unbound async_run_entry_fn
[ 54.641273] Call Trace:
[ 54.641273] dump_stack+0x67/0x90
[ 54.641273] __register_sysctl_table+0x50b/0x570
[ 54.641273] ? rcu_read_lock_sched_held+0x6f/0x80
[ 54.641273] ? kmem_cache_alloc_trace+0x1c7/0x1f0
[ 54.646814] __register_sysctl_paths+0x1c8/0x1f0
[ 54.646814] cdrom_sysctl_register.part.7+0xc/0x5f
[ 54.646814] register_cdrom.cold.24+0x2a/0x33
[ 54.646814] sr_probe+0x4bd/0x580
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] really_probe+0xd6/0x260
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] driver_probe_device+0x4a/0xb0
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] bus_for_each_drv+0x73/0xc0
[ 54.646814] __device_attach+0xd6/0x130
[ 54.646814] bus_probe_device+0x9a/0xb0
[ 54.646814] device_add+0x40c/0x670
[ 54.646814] ? __pm_runtime_resume+0x4f/0x80
[ 54.646814] scsi_sysfs_add_sdev+0x81/0x290
[ 54.646814] scsi_probe_and_add_lun+0x888/0xc00
[ 54.646814] ? scsi_autopm_get_host+0x21/0x40
[ 54.646814] __scsi_add_device+0x116/0x130
[ 54.646814] ata_scsi_scan_host+0x93/0x1c0
[ 54.646814] async_run_entry_fn+0x34/0x100
[ 54.646814] process_one_work+0x237/0x5e0
[ 54.646814] worker_thread+0x37/0x380
[ 54.646814] ? rescuer_thread+0x360/0x360
[ 54.646814] kthread+0x118/0x130
[ 54.646814] ? kthread_create_on_node+0x60/0x60
[ 54.646814] ret_from_fork+0x3a/0x50
The only sensible explanation is that cdrom_sysctl_register() is called
twice, once from the module init function and once from register_cdrom().
cdrom_sysctl_register() is not mutex protected and may happily execute
twice if the second call is made before the first call is complete.
Use a static atomic to ensure that the function is executed exactly once.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cdrom/cdrom.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 10802d1fc554..27a82a559ab9 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -265,6 +265,7 @@
/* #define ERRLOGMASK (CD_WARNING|CD_OPEN|CD_COUNT_TRACKS|CD_CLOSE) */
/* #define ERRLOGMASK (CD_WARNING|CD_REG_UNREG|CD_DO_IOCTL|CD_OPEN|CD_CLOSE|CD_COUNT_TRACKS) */
+#include <linux/atomic.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/major.h>
@@ -3693,9 +3694,9 @@ static struct ctl_table_header *cdrom_sysctl_header;
static void cdrom_sysctl_register(void)
{
- static int initialized;
+ static atomic_t initialized = ATOMIC_INIT(0);
- if (initialized == 1)
+ if (!atomic_add_unless(&initialized, 1, 1))
return;
cdrom_sysctl_header = register_sysctl_table(cdrom_root_table);
@@ -3706,8 +3707,6 @@ static void cdrom_sysctl_register(void)
cdrom_sysctl_settings.debug = debug;
cdrom_sysctl_settings.lock = lockdoor;
cdrom_sysctl_settings.check = check_media_type;
-
- initialized = 1;
}
static void cdrom_sysctl_unregister(void)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 121/187] drm: rcar-du: add missing of_node_put
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (119 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 120/187] cdrom: Fix race condition in cdrom_sysctl_register Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 122/187] drm/amd/display: Dont re-program planes for DPMS changes Greg Kroah-Hartman
` (70 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Julia Lawall, Laurent Pinchart,
Kieran Bingham, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4c6d8fc20b09f9684743afd72e4dbc3f15524479 ]
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
Add a second of_node_put if no encoder is selected (encoder remains NULL).
The semantic match that finds the first problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index fb46df56f0c4..0386b454e221 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -300,6 +300,7 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
dev_dbg(rcdu->dev,
"connected entity %pOF is disabled, skipping\n",
entity);
+ of_node_put(entity);
return -ENODEV;
}
@@ -335,6 +336,7 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
dev_warn(rcdu->dev,
"no encoder found for endpoint %pOF, skipping\n",
ep->local_node);
+ of_node_put(entity);
return -ENODEV;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 122/187] drm/amd/display: Dont re-program planes for DPMS changes
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (120 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 121/187] drm: rcar-du: add missing of_node_put Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 123/187] drm/amd/display: Disconnect mpcc when changing tg Greg Kroah-Hartman
` (69 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Kazlauskas, Sun peng Li,
Bhawanpreet Lakha, Tony Cheng, Alex Deucher, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5062b797db4103218fa00ee254417b8ecaab7401 ]
[Why]
There are opt1c lock warnings and CRTC read timeouts when running the
"igt@kms_plane@plane-position-hole-dpms-pipe-*" tests. These are
caused by trying to reprogram planes that are not in the current
context.
DPMS off removes the stream from the context. In this case:
new_crtc_state->active_changed = true
new_crtc_state->mode_changed = false
The planes are reprogrammed before the stream is removed from the
context because stream_state->mode_changed = false.
For DPMS adds the stream and planes back to the context:
new_crtc_state->active_changed = true
new_crtc_state->mode_changed = false
The planes are also reprogrammed here before the stream is added to the
context because stream_state->mode_changed = true. They were not
previously in the current context so warnings occur here.
[How]
Set stream_state->mode_changed = true when
new_crtc_state->active_changed = true too.
This prevents reprogramming before the context is applied in DC. The
programming will be done after the context is applied.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index c5ba9128b736..c57e85f08e23 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4368,7 +4368,8 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
static void amdgpu_dm_crtc_copy_transient_flags(struct drm_crtc_state *crtc_state,
struct dc_stream_state *stream_state)
{
- stream_state->mode_changed = crtc_state->mode_changed;
+ stream_state->mode_changed =
+ crtc_state->mode_changed || crtc_state->active_changed;
}
static int amdgpu_dm_atomic_commit(struct drm_device *dev,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 123/187] drm/amd/display: Disconnect mpcc when changing tg
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (121 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 122/187] drm/amd/display: Dont re-program planes for DPMS changes Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 124/187] perf/aux: Make perf_event accessible to setup_aux() Greg Kroah-Hartman
` (68 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Kazlauskas,
Dmytro Laktyushkin, Tony Cheng, Bhawanpreet Lakha, Alex Deucher,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 77476360f173c127c191bfe8ca8113130ef283b8 ]
[Why]
This fixes an mpc programming error for the following sequence of
atomic commits when pipe split is enabled:
Commit 1: CRTC0 (plane 4, plane 3)
Pipe 0: old_plane_state = A0, new_plane_state = A1, new_tg = T0
Pipe 1: old_plane_state = B0, new_plane_state = B1, new_tg = T0
Pipe 2: old_plane_state = A0, new_plane_state = A1, new_tg = T0
Pipe 3: old_plane_state = B0, new_plane_state = B1, new_tg = T0
Commit 2: CRTC0 (plane 3), CRTC1 (plane 2)
Pipe 0: old_plane_state = A1, new_plane_state = A2, new_tg = T0
Pipe 1: old_plane_state = B1, new_plane_state = B2, new_tg = T1
Pipe 2: old_plane_state = A1, new_plane_state = NULL, new_tg = NULL
Pipe 3: old_plane_state = B1, new_plane_state = NULL, new_tg = NULL
In the second commit the assertion for mpcc in use is hit because
mpcc disconnect never occurs for pipe 1. This is because the stream
changes for pipe 1 and the opp_list is empty.
This sequence occurs when running the
"igt@kms_plane_multiple@atomic-pipe-A-tiling-none" test with two
displays connected.
[How]
Expand the reset condition to include:
"old_pipe_ctx->stream_res.tg != new_pipe_ctx->stream_res.tg"
...but only when the plane state is non-NULL for both old and new.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 4058b59d9bea..a0355709abd1 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -2336,9 +2336,10 @@ static void dcn10_apply_ctx_for_surface(
}
}
- if (!pipe_ctx->plane_state &&
- old_pipe_ctx->plane_state &&
- old_pipe_ctx->stream_res.tg == tg) {
+ if ((!pipe_ctx->plane_state ||
+ pipe_ctx->stream_res.tg != old_pipe_ctx->stream_res.tg) &&
+ old_pipe_ctx->plane_state &&
+ old_pipe_ctx->stream_res.tg == tg) {
dc->hwss.plane_atomic_disconnect(dc, old_pipe_ctx);
removed_pipe[i] = true;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 124/187] perf/aux: Make perf_event accessible to setup_aux()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (122 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 123/187] drm/amd/display: Disconnect mpcc when changing tg Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 125/187] e1000e: fix cyclic resets at link up with active tx Greg Kroah-Hartman
` (67 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Poirier, Suzuki Poulouse,
Peter Zijlstra, Adrian Hunter, Alexander Shishkin,
Alexei Starovoitov, H. Peter Anvin, Heiko Carstens, Jiri Olsa,
Mark Rutland, Martin Schwidefsky, Namhyung Kim, Thomas Gleixner,
Will Deacon, linux-arm-kernel, linux-s390,
Arnaldo Carvalho de Melo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 840018668ce2d96783356204ff282d6c9b0e5f66 ]
When pmu::setup_aux() is called the coresight PMU needs to know which
sink to use for the session by looking up the information in the
event's attr::config2 field.
As such simply replace the cpu information by the complete perf_event
structure and change all affected customers.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20190131184714.20388-2-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/kernel/perf_cpum_sf.c | 6 +++---
arch/x86/events/intel/bts.c | 4 +++-
arch/x86/events/intel/pt.c | 5 +++--
drivers/hwtracing/coresight/coresight-etm-perf.c | 6 +++---
drivers/perf/arm_spe_pmu.c | 6 +++---
include/linux/perf_event.h | 2 +-
kernel/events/ring_buffer.c | 2 +-
7 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 5c53e977be62..44404836e9d1 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1600,7 +1600,7 @@ static void aux_sdb_init(unsigned long sdb)
/*
* aux_buffer_setup() - Setup AUX buffer for diagnostic mode sampling
- * @cpu: On which to allocate, -1 means current
+ * @event: Event the buffer is setup for, event->cpu == -1 means current
* @pages: Array of pointers to buffer pages passed from perf core
* @nr_pages: Total pages
* @snapshot: Flag for snapshot mode
@@ -1612,8 +1612,8 @@ static void aux_sdb_init(unsigned long sdb)
*
* Return the private AUX buffer structure if success or NULL if fails.
*/
-static void *aux_buffer_setup(int cpu, void **pages, int nr_pages,
- bool snapshot)
+static void *aux_buffer_setup(struct perf_event *event, void **pages,
+ int nr_pages, bool snapshot)
{
struct sf_buffer *sfb;
struct aux_buffer *aux;
diff --git a/arch/x86/events/intel/bts.c b/arch/x86/events/intel/bts.c
index 24ffa1e88cf9..7139f6bf27ad 100644
--- a/arch/x86/events/intel/bts.c
+++ b/arch/x86/events/intel/bts.c
@@ -77,10 +77,12 @@ static size_t buf_size(struct page *page)
}
static void *
-bts_buffer_setup_aux(int cpu, void **pages, int nr_pages, bool overwrite)
+bts_buffer_setup_aux(struct perf_event *event, void **pages,
+ int nr_pages, bool overwrite)
{
struct bts_buffer *buf;
struct page *page;
+ int cpu = event->cpu;
int node = (cpu == -1) ? cpu : cpu_to_node(cpu);
unsigned long offset;
size_t size = nr_pages << PAGE_SHIFT;
diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 8d016ce5b80d..8f4c98fdd03c 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -1104,10 +1104,11 @@ static int pt_buffer_init_topa(struct pt_buffer *buf, unsigned long nr_pages,
* Return: Our private PT buffer structure.
*/
static void *
-pt_buffer_setup_aux(int cpu, void **pages, int nr_pages, bool snapshot)
+pt_buffer_setup_aux(struct perf_event *event, void **pages,
+ int nr_pages, bool snapshot)
{
struct pt_buffer *buf;
- int node, ret;
+ int node, ret, cpu = event->cpu;
if (!nr_pages)
return NULL;
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 677695635211..0f5e03e4df22 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -181,15 +181,15 @@ static void etm_free_aux(void *data)
schedule_work(&event_data->work);
}
-static void *etm_setup_aux(int event_cpu, void **pages,
+static void *etm_setup_aux(struct perf_event *event, void **pages,
int nr_pages, bool overwrite)
{
- int cpu;
+ int cpu = event->cpu;
cpumask_t *mask;
struct coresight_device *sink;
struct etm_event_data *event_data = NULL;
- event_data = alloc_event_data(event_cpu);
+ event_data = alloc_event_data(cpu);
if (!event_data)
return NULL;
INIT_WORK(&event_data->work, free_event_data);
diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
index e1a77b2de78a..3623f6489f49 100644
--- a/drivers/perf/arm_spe_pmu.c
+++ b/drivers/perf/arm_spe_pmu.c
@@ -824,10 +824,10 @@ static void arm_spe_pmu_read(struct perf_event *event)
{
}
-static void *arm_spe_pmu_setup_aux(int cpu, void **pages, int nr_pages,
- bool snapshot)
+static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages,
+ int nr_pages, bool snapshot)
{
- int i;
+ int i, cpu = event->cpu;
struct page **pglist;
struct arm_spe_pmu_buf *buf;
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index c2876e740514..42fc852bf512 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -409,7 +409,7 @@ struct pmu {
/*
* Set up pmu-private data structures for an AUX area
*/
- void *(*setup_aux) (int cpu, void **pages,
+ void *(*setup_aux) (struct perf_event *event, void **pages,
int nr_pages, bool overwrite);
/* optional */
diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 5631af940316..474b2ccdbe69 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -648,7 +648,7 @@ int rb_alloc_aux(struct ring_buffer *rb, struct perf_event *event,
goto out;
}
- rb->aux_priv = event->pmu->setup_aux(event->cpu, rb->aux_pages, nr_pages,
+ rb->aux_priv = event->pmu->setup_aux(event, rb->aux_pages, nr_pages,
overwrite);
if (!rb->aux_priv)
goto out;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 125/187] e1000e: fix cyclic resets at link up with active tx
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (123 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 124/187] perf/aux: Make perf_event accessible to setup_aux() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 126/187] e1000e: Exclude device from suspend direct complete optimization Greg Kroah-Hartman
` (66 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Konstantin Khlebnikov, Aaron Brown,
Jeff Kirsher, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61 ]
I'm seeing series of e1000e resets (sometimes endless) at system boot
if something generates tx traffic at this time. In my case this is
netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states
have been disabled in order to enable jumbo frames" from e1000e itself.
As result e1000_watchdog_task sees used tx buffer while carrier is off
and start this reset cycle again.
[ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000
[ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 27.174495] 8021q: 802.1Q VLAN Support v1.8
[ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1
[ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 30.898564] netpoll: netconsole: local port 6666
[ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8
[ 30.898567] netpoll: netconsole: interface 'eth1'
[ 30.898568] netpoll: netconsole: remote port 6666
[ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790
[ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0
[ 30.917747] console [netcon0] enabled
[ 30.917749] netconsole: network logging started
[ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
This patch flushes tx buffers only once when carrier is off
rather than at each watchdog iteration.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index e3945469b5c8..23edc1364487 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5286,8 +5286,13 @@ static void e1000_watchdog_task(struct work_struct *work)
/* 8000ES2LAN requires a Rx packet buffer work-around
* on link down event; reset the controller to flush
* the Rx packet buffer.
+ *
+ * If the link is lost the controller stops DMA, but
+ * if there is queued Tx work it cannot be done. So
+ * reset the controller to flush the Tx packet buffers.
*/
- if (adapter->flags & FLAG_RX_NEEDS_RESTART)
+ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
+ e1000_desc_unused(tx_ring) + 1 < tx_ring->count)
adapter->flags |= FLAG_RESTART_NOW;
else
pm_schedule_suspend(netdev->dev.parent,
@@ -5310,14 +5315,6 @@ link_up:
adapter->gotc_old = adapter->stats.gotc;
spin_unlock(&adapter->stats64_lock);
- /* If the link is lost the controller stops DMA, but
- * if there is queued Tx work it cannot be done. So
- * reset the controller to flush the Tx packet buffers.
- */
- if (!netif_carrier_ok(netdev) &&
- (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
- adapter->flags |= FLAG_RESTART_NOW;
-
/* If reset is necessary, do it outside of interrupt context. */
if (adapter->flags & FLAG_RESTART_NOW) {
schedule_work(&adapter->reset_task);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 126/187] e1000e: Exclude device from suspend direct complete optimization
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (124 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 125/187] e1000e: fix cyclic resets at link up with active tx Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 127/187] platform/x86: intel_pmc_core: Fix PCH IP sts reading Greg Kroah-Hartman
` (65 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kai-Heng Feng, Aaron Brown,
Jeff Kirsher, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 59f58708c5047289589cbf6ee95146b76cf57d1e ]
e1000e sets different WoL settings in system suspend callback and
runtime suspend callback.
The suspend direct complete optimization leaves e1000e in runtime
suspended state with wrong WoL setting during system suspend.
To fix this, we need to disable suspend direct complete optimization to
let e1000e always use suspend callback to set correct WoL during system
suspend.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 23edc1364487..8b11682ebba2 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -7327,6 +7327,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
e1000_print_device_info(adapter);
+ dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+
if (pci_dev_run_wake(pdev))
pm_runtime_put_noidle(&pdev->dev);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 127/187] platform/x86: intel_pmc_core: Fix PCH IP sts reading
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (125 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 126/187] e1000e: Exclude device from suspend direct complete optimization Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 128/187] i2c: of: Try to find an I2C adapter matching the parent Greg Kroah-Hartman
` (64 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David E. Box, Srinivas Pandruvada,
Rajneesh Bhardwaj, Andy Shevchenko, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0e68eeea9894feeba2edf7ec63e4551b87f39621 ]
A previous commit "platform/x86: intel_pmc_core: Make the driver PCH
family agnostic <c977b98bbef5898ed3d30b08ea67622e9e82082a>" provided
better abstraction to this driver but has some fundamental issues.
e.g. the following condition
for (index = 0; index < pmcdev->map->ppfear_buckets &&
index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)
is wrong because for CNL, PPFEAR_MAX_NUM_ENTRIES is hardcoded as 5 which
is _wrong_ and even though ppfear_buckets is 8, the loop fails to read
all eight registers needed for CNL PCH i.e. PPFEAR0 and PPFEAR1. This
patch refactors the pfear show logic to correctly read PCH IP power
gating status for Cannonlake and beyond.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: c977b98bbef5 ("platform/x86: intel_pmc_core: Make the driver PCH family agnostic")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/intel_pmc_core.c | 3 ++-
drivers/platform/x86/intel_pmc_core.h | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index 2d272a3e0176..e0dcdb3cc070 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -333,7 +333,8 @@ static int pmc_core_ppfear_sts_show(struct seq_file *s, void *unused)
index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)
pf_regs[index] = pmc_core_reg_read_byte(pmcdev, iter);
- for (index = 0; map[index].name; index++)
+ for (index = 0; map[index].name &&
+ index < pmcdev->map->ppfear_buckets * 8; index++)
pmc_core_display_map(s, index, pf_regs[index / 8], map);
return 0;
diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel_pmc_core.h
index 93a7e99e1f8b..3f9711b03cb4 100644
--- a/drivers/platform/x86/intel_pmc_core.h
+++ b/drivers/platform/x86/intel_pmc_core.h
@@ -39,7 +39,7 @@
#define SPT_PMC_SLP_S0_RES_COUNTER_STEP 0x64
#define PMC_BASE_ADDR_MASK ~(SPT_PMC_MMIO_REG_LEN - 1)
#define MTPMC_MASK 0xffff0000
-#define PPFEAR_MAX_NUM_ENTRIES 5
+#define PPFEAR_MAX_NUM_ENTRIES 12
#define SPT_PPFEAR_NUM_ENTRIES 5
#define SPT_PMC_READ_DISABLE_BIT 0x16
#define SPT_PMC_MSG_FULL_STS_BIT 0x18
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 128/187] i2c: of: Try to find an I2C adapter matching the parent
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (126 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 127/187] platform/x86: intel_pmc_core: Fix PCH IP sts reading Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 129/187] staging: spi: mt7621: Add return code check on device_reset() Greg Kroah-Hartman
` (63 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thierry Reding, Tristan Bastian,
Wolfram Sang, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e814e688413aabd7b0d75e2a8ed1caa472951dec ]
If an I2C adapter doesn't match the provided device tree node, also try
matching the parent's device tree node. This allows finding an adapter
based on the device node of the parent device that was used to register
it.
This fixes a regression on Tegra124-based Chromebooks (Nyan) where the
eDP controller registers an I2C adapter that is used to read to EDID.
After commit 993a815dcbb2 ("dt-bindings: panel: Add missing .txt
suffix") this stopped working because the I2C adapter could no longer
be found. The approach in this patch fixes the regression without
introducing the issues that the above commit solved.
Fixes: 17ab7806de0c ("drm: don't link DP aux i2c adapter to the hardware device node")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Tristan Bastian <tristan-c.bastian@gmx.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/i2c/i2c-core-of.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
index 6cb7ad608bcd..0f01cdba9d2c 100644
--- a/drivers/i2c/i2c-core-of.c
+++ b/drivers/i2c/i2c-core-of.c
@@ -121,6 +121,17 @@ static int of_dev_node_match(struct device *dev, void *data)
return dev->of_node == data;
}
+static int of_dev_or_parent_node_match(struct device *dev, void *data)
+{
+ if (dev->of_node == data)
+ return 1;
+
+ if (dev->parent)
+ return dev->parent->of_node == data;
+
+ return 0;
+}
+
/* must call put_device() when done with returned i2c_client device */
struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
{
@@ -145,7 +156,8 @@ struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
struct device *dev;
struct i2c_adapter *adapter;
- dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
+ dev = bus_find_device(&i2c_bus_type, NULL, node,
+ of_dev_or_parent_node_match);
if (!dev)
return NULL;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 129/187] staging: spi: mt7621: Add return code check on device_reset()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (127 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 128/187] i2c: of: Try to find an I2C adapter matching the parent Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 130/187] iwlwifi: mvm: fix RFH config command with >=10 CPUs Greg Kroah-Hartman
` (62 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stefan Roese, Mark Brown,
Sankalp Negi, Chuanhong Guo, John Crispin, NeilBrown,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 46c337872f34bc6387b0c29a4964f562c70139e3 ]
This patch adds a return code check on device_reset() and removes the
compile warning.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/mt7621-spi/spi-mt7621.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/mt7621-spi/spi-mt7621.c b/drivers/staging/mt7621-spi/spi-mt7621.c
index d045b5568e0f..578aa6824ad3 100644
--- a/drivers/staging/mt7621-spi/spi-mt7621.c
+++ b/drivers/staging/mt7621-spi/spi-mt7621.c
@@ -429,6 +429,7 @@ static int mt7621_spi_probe(struct platform_device *pdev)
int status = 0;
struct clk *clk;
struct mt7621_spi_ops *ops;
+ int ret;
match = of_match_device(mt7621_spi_match, &pdev->dev);
if (!match)
@@ -476,7 +477,11 @@ static int mt7621_spi_probe(struct platform_device *pdev)
rs->pending_write = 0;
dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
- device_reset(&pdev->dev);
+ ret = device_reset(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "SPI reset failed!\n");
+ return ret;
+ }
mt7621_spi_reset(rs, 0);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 130/187] iwlwifi: mvm: fix RFH config command with >=10 CPUs
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (128 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 129/187] staging: spi: mt7621: Add return code check on device_reset() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 131/187] ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe Greg Kroah-Hartman
` (61 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johannes Berg, Luca Coelho, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit dbf592f3d14fb7d532cb7c820b1065cf33e02aaa ]
If we have >=10 (logical) CPUs, our command size exceeds the
internal buffer size and the command fails; fix that by using
IWL_HCMD_DFL_NOCOPY for the command that's allocated anyway.
While at it, also fix the leak of cmd, and use struct_size()
to calculate its size.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 8edbfaa19835 ("iwlwifi: mvm: configure multi RX queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index 16c6c7f921a8..8b7d70e3a379 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -132,13 +132,17 @@ static int iwl_send_rss_cfg_cmd(struct iwl_mvm *mvm)
static int iwl_configure_rxq(struct iwl_mvm *mvm)
{
- int i, num_queues, size;
+ int i, num_queues, size, ret;
struct iwl_rfh_queue_config *cmd;
+ struct iwl_host_cmd hcmd = {
+ .id = WIDE_ID(DATA_PATH_GROUP, RFH_QUEUE_CONFIG_CMD),
+ .dataflags[0] = IWL_HCMD_DFL_NOCOPY,
+ };
/* Do not configure default queue, it is configured via context info */
num_queues = mvm->trans->num_rx_queues - 1;
- size = sizeof(*cmd) + num_queues * sizeof(struct iwl_rfh_queue_data);
+ size = struct_size(cmd, data, num_queues);
cmd = kzalloc(size, GFP_KERNEL);
if (!cmd)
@@ -159,10 +163,14 @@ static int iwl_configure_rxq(struct iwl_mvm *mvm)
cmd->data[i].fr_bd_wid = cpu_to_le32(data.fr_bd_wid);
}
- return iwl_mvm_send_cmd_pdu(mvm,
- WIDE_ID(DATA_PATH_GROUP,
- RFH_QUEUE_CONFIG_CMD),
- 0, size, cmd);
+ hcmd.data[0] = cmd;
+ hcmd.len[0] = size;
+
+ ret = iwl_mvm_send_cmd(mvm, &hcmd);
+
+ kfree(cmd);
+
+ return ret;
}
static int iwl_mvm_send_dqa_cmd(struct iwl_mvm *mvm)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 131/187] ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (129 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 130/187] iwlwifi: mvm: fix RFH config command with >=10 CPUs Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 132/187] sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK Greg Kroah-Hartman
` (60 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wen Yang, Timur Tabi, Nicolin Chen,
Xiubo Li, Fabio Estevam, Liam Girdwood, Mark Brown,
Jaroslav Kysela, Takashi Iwai, alsa-devel, linuxppc-dev,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 11907e9d3533648615db08140e3045b829d2c141 ]
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Signed-off-by: Wen Yang <yellowriver2010@hotmil.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/fsl-asoc-card.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 44433b20435c..600d9be9706e 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -689,6 +689,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
asrc_fail:
of_node_put(asrc_np);
of_node_put(codec_np);
+ put_device(&cpu_pdev->dev);
fail:
of_node_put(cpu_np);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 132/187] sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (130 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 131/187] ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 133/187] efi/memattr: Dont bail on zero VA if it equals the regions PA Greg Kroah-Hartman
` (59 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Syuuichirou Ishii, Tarumizu, Kohei,
Hidetoshi Seto, Peter Zijlstra (Intel),
Masayoshi Mizuma, Joe Lawrence, Linus Torvalds, Masayoshi Mizuma,
Mike Galbraith, Thomas Gleixner, Ingo Molnar, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1ca4fa3ab604734e38e2a3000c9abf788512ffa7 ]
register_sched_domain_sysctl() copies the cpu_possible_mask into
sd_sysctl_cpus, but only if sd_sysctl_cpus hasn't already been
allocated (ie, CONFIG_CPUMASK_OFFSTACK is set). However, when
CONFIG_CPUMASK_OFFSTACK is not set, sd_sysctl_cpus is left
uninitialized (all zeroes) and the kernel may fail to initialize
sched_domain sysctl entries for all possible CPUs.
This is visible to the user if the kernel is booted with maxcpus=n, or
if ACPI tables have been modified to leave CPUs offline, and then
checking for missing /proc/sys/kernel/sched_domain/cpu* entries.
Fix this by separating the allocation and initialization, and adding a
flag to initialize the possible CPU entries while system booting only.
Tested-by: Syuuichirou Ishii <ishii.shuuichir@jp.fujitsu.com>
Tested-by: Tarumizu, Kohei <tarumizu.kohei@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190129151245.5073-1-msys.mizuma@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/sched/debug.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 6383aa6a60ca..141ea9ff210e 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -315,6 +315,7 @@ void register_sched_domain_sysctl(void)
{
static struct ctl_table *cpu_entries;
static struct ctl_table **cpu_idx;
+ static bool init_done = false;
char buf[32];
int i;
@@ -344,7 +345,10 @@ void register_sched_domain_sysctl(void)
if (!cpumask_available(sd_sysctl_cpus)) {
if (!alloc_cpumask_var(&sd_sysctl_cpus, GFP_KERNEL))
return;
+ }
+ if (!init_done) {
+ init_done = true;
/* init to possible to not have holes in @cpu_entries */
cpumask_copy(sd_sysctl_cpus, cpu_possible_mask);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 133/187] efi/memattr: Dont bail on zero VA if it equals the regions PA
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (131 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 132/187] sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 134/187] sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock() Greg Kroah-Hartman
` (58 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ard Biesheuvel, Sai Praneeth Prakhya,
AKASHI Takahiro, Alexander Graf, Bjorn Andersson,
Borislav Petkov, Heinrich Schuchardt, Jeffrey Hugo, Lee Jones,
Leif Lindholm, Linus Torvalds, Matt Fleming, Peter Jones,
Peter Zijlstra, Thomas Gleixner, linux-efi, Ingo Molnar,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5de0fef0230f3c8d75cff450a71740a7bf2db866 ]
The EFI memory attributes code cross-references the EFI memory map with
the more granular EFI memory attributes table to ensure that they are in
sync before applying the strict permissions to the regions it describes.
Since we always install virtual mappings for the EFI runtime regions to
which these strict permissions apply, we currently perform a sanity check
on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit
is set, and that the virtual address has been assigned.
However, in cases where a runtime region exists at physical address 0x0,
and the virtual mapping equals the physical mapping, e.g., when running
in mixed mode on x86, we encounter a memory descriptor with the runtime
attribute and virtual address 0x0, and incorrectly draw the conclusion
that a runtime region exists for which no virtual mapping was installed,
and give up altogether. The consequence of this is that firmware mappings
retain their read-write-execute permissions, making the system more
vulnerable to attacks.
So let's only bail if the virtual address of 0x0 has been assigned to a
physical region that does not reside at address 0x0.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 10f0d2f577053 ("efi: Implement generic support for the Memory ...")
Link: http://lkml.kernel.org/r/20190202094119.13230-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/efi/memattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/efi/memattr.c b/drivers/firmware/efi/memattr.c
index 8986757eafaf..aac972b056d9 100644
--- a/drivers/firmware/efi/memattr.c
+++ b/drivers/firmware/efi/memattr.c
@@ -94,7 +94,7 @@ static bool entry_is_valid(const efi_memory_desc_t *in, efi_memory_desc_t *out)
if (!(md->attribute & EFI_MEMORY_RUNTIME))
continue;
- if (md->virt_addr == 0) {
+ if (md->virt_addr == 0 && md->phys_addr != 0) {
/* no virtual mapping has been installed by the stub */
break;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 134/187] sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (132 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 133/187] efi/memattr: Dont bail on zero VA if it equals the regions PA Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 135/187] drm/vkms: Bugfix extra vblank frame Greg Kroah-Hartman
` (57 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrea Parri, Peter Zijlstra (Intel),
Alan Stern, Linus Torvalds, Mike Galbraith, Paul E. McKenney,
Thomas Gleixner, Will Deacon, Ingo Molnar, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c546951d9c9300065bad253ecdf1ac59ce9d06c8 ]
move_queued_task() synchronizes with task_rq_lock() as follows:
move_queued_task() task_rq_lock()
[S] ->on_rq = MIGRATING [L] rq = task_rq()
WMB (__set_task_cpu()) ACQUIRE (rq->lock);
[S] ->cpu = new_cpu [L] ->on_rq
where "[L] rq = task_rq()" is ordered before "ACQUIRE (rq->lock)" by an
address dependency and, in turn, "ACQUIRE (rq->lock)" is ordered before
"[L] ->on_rq" by the ACQUIRE itself.
Use READ_ONCE() to load ->cpu in task_rq() (c.f., task_cpu()) to honor
this address dependency. Also, mark the accesses to ->cpu and ->on_rq
with READ_ONCE()/WRITE_ONCE() to comply with the LKMM.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190121155240.27173-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/sched.h | 4 ++--
kernel/sched/core.c | 9 +++++----
kernel/sched/sched.h | 6 +++---
3 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4abb5bd74b04..5dc024e28397 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1737,9 +1737,9 @@ static __always_inline bool need_resched(void)
static inline unsigned int task_cpu(const struct task_struct *p)
{
#ifdef CONFIG_THREAD_INFO_IN_TASK
- return p->cpu;
+ return READ_ONCE(p->cpu);
#else
- return task_thread_info(p)->cpu;
+ return READ_ONCE(task_thread_info(p)->cpu);
#endif
}
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 152a0b0c91bb..9a4f57d7e931 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -107,11 +107,12 @@ struct rq *task_rq_lock(struct task_struct *p, struct rq_flags *rf)
* [L] ->on_rq
* RELEASE (rq->lock)
*
- * If we observe the old CPU in task_rq_lock, the acquire of
+ * If we observe the old CPU in task_rq_lock(), the acquire of
* the old rq->lock will fully serialize against the stores.
*
- * If we observe the new CPU in task_rq_lock, the acquire will
- * pair with the WMB to ensure we must then also see migrating.
+ * If we observe the new CPU in task_rq_lock(), the address
+ * dependency headed by '[L] rq = task_rq()' and the acquire
+ * will pair with the WMB to ensure we then also see migrating.
*/
if (likely(rq == task_rq(p) && !task_on_rq_migrating(p))) {
rq_pin_lock(rq, rf);
@@ -910,7 +911,7 @@ static struct rq *move_queued_task(struct rq *rq, struct rq_flags *rf,
{
lockdep_assert_held(&rq->lock);
- p->on_rq = TASK_ON_RQ_MIGRATING;
+ WRITE_ONCE(p->on_rq, TASK_ON_RQ_MIGRATING);
dequeue_task(rq, p, DEQUEUE_NOCLOCK);
set_task_cpu(p, new_cpu);
rq_unlock(rq, rf);
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index b63172288f7b..4c7a837d7c14 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1331,9 +1331,9 @@ static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu)
*/
smp_wmb();
#ifdef CONFIG_THREAD_INFO_IN_TASK
- p->cpu = cpu;
+ WRITE_ONCE(p->cpu, cpu);
#else
- task_thread_info(p)->cpu = cpu;
+ WRITE_ONCE(task_thread_info(p)->cpu, cpu);
#endif
p->wake_cpu = cpu;
#endif
@@ -1434,7 +1434,7 @@ static inline int task_on_rq_queued(struct task_struct *p)
static inline int task_on_rq_migrating(struct task_struct *p)
{
- return p->on_rq == TASK_ON_RQ_MIGRATING;
+ return READ_ONCE(p->on_rq) == TASK_ON_RQ_MIGRATING;
}
/*
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 135/187] drm/vkms: Bugfix extra vblank frame
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (133 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 134/187] sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 136/187] ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation Greg Kroah-Hartman
` (56 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shayenne Moura, Daniel Vetter,
Rodrigo Siqueira, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit def35e7c592616bc09be328de8795e5e624a3cf8 ]
kms_flip tests are breaking on vkms when simulate vblank because vblank
event sequence count returns one extra frame after arm vblank event to
make a page flip.
When vblank interrupt happens, userspace processes the vblank event and
issues the next page flip command. Kernel calls queue_work to call
commit_planes and arm the new page flip. The next vblank picks up the
newly armed vblank event and vblank interrupt happens again.
The arm and vblank event are asynchronous, then, on the next vblank, we
receive x+2 from `get_vblank_timestamp`, instead x+1, although timestamp
and vblank seqno matches.
Function `get_vblank_timestamp` is reached by 2 ways:
- from `drm_mode_page_flip_ioctl`: driver is doing one atomic
operation to synchronize planes in the same output. There is no
vblank simulation, the `drm_crtc_arm_vblank_event` function adds 1
on vblank count, and the variable in_vblank_irq is false
- from `vkms_vblank_simulate`: since the driver is doing a vblank
simulation, the variable in_vblank_irq is true.
Fix this problem subtracting one vblank period from vblank_time when
`get_vblank_timestamp` is called from trace `drm_mode_page_flip_ioctl`,
i.e., is not a real vblank interrupt, and getting the timestamp and
vblank seqno when it is a real vblank interrupt.
The reason for all this is that get_vblank_timestamp always supplies the
timestamp for the next vblank event. The hrtimer is the vblank
simulator, and it needs the correct previous value to present the next
vblank. Since this is how hw timestamp registers work and what the
vblank core expects.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/171e6e1c239cbca0c3df7183ed8acdfeeace9cf4.1548856186.git.shayenneluzmoura@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/vkms/vkms_crtc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
index 1ea2dd35bca9..0a271f762a0a 100644
--- a/drivers/gpu/drm/vkms/vkms_crtc.c
+++ b/drivers/gpu/drm/vkms/vkms_crtc.c
@@ -55,6 +55,9 @@ bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
*vblank_time = output->vblank_hrtimer.node.expires;
+ if (!in_vblank_irq)
+ *vblank_time -= output->period_ns;
+
return true;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 136/187] ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (134 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 135/187] drm/vkms: Bugfix extra vblank frame Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 137/187] efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted Greg Kroah-Hartman
` (55 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Daney, Rob Herring,
Mathieu Malaterre, Vladimir Zapolskiy, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3e3380d0675d5e20b0af067d60cb947a4348bf9b ]
Improve the DTS files by removing all the leading "0x" and zeros to fix
the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +
For simplicity, two sed expressions were used to solve each warnings
separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[vzapolskiy: fixed commit message to pass checkpatch.pl test]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/lpc32xx.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index abff7ef7c9cd..4981741377f3 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -230,7 +230,7 @@
status = "disabled";
};
- i2s1: i2s@2009C000 {
+ i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x2009C000 0x1000>;
};
@@ -273,7 +273,7 @@
status = "disabled";
};
- i2c1: i2c@400A0000 {
+ i2c1: i2c@400a0000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A0000 0x100>;
interrupt-parent = <&sic1>;
@@ -284,7 +284,7 @@
clocks = <&clk LPC32XX_CLK_I2C1>;
};
- i2c2: i2c@400A8000 {
+ i2c2: i2c@400a8000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A8000 0x100>;
interrupt-parent = <&sic1>;
@@ -295,7 +295,7 @@
clocks = <&clk LPC32XX_CLK_I2C2>;
};
- mpwm: mpwm@400E8000 {
+ mpwm: mpwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
reg = <0x400E8000 0x78>;
status = "disabled";
@@ -394,7 +394,7 @@
#gpio-cells = <3>; /* bank, pin, flags */
};
- timer4: timer@4002C000 {
+ timer4: timer@4002c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4002C000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -412,7 +412,7 @@
status = "disabled";
};
- watchdog: watchdog@4003C000 {
+ watchdog: watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
clocks = <&clk LPC32XX_CLK_WDOG>;
@@ -451,7 +451,7 @@
status = "disabled";
};
- timer1: timer@4004C000 {
+ timer1: timer@4004c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4004C000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@@ -475,7 +475,7 @@
status = "disabled";
};
- pwm1: pwm@4005C000 {
+ pwm1: pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
@@ -484,7 +484,7 @@
status = "disabled";
};
- pwm2: pwm@4005C004 {
+ pwm2: pwm@4005c004 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 137/187] efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (135 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 136/187] ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 138/187] soc: qcom: gsbi: Fix error handling in gsbi_probe() Greg Kroah-Hartman
` (54 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jeffrey Hugo, Bjorn Andersson,
Lee Jones, Ard Biesheuvel, AKASHI Takahiro, Alexander Graf,
Borislav Petkov, Heinrich Schuchardt, Leif Lindholm,
Linus Torvalds, Matt Fleming, Peter Jones, Peter Zijlstra,
Sai Praneeth Prakhya, Thomas Gleixner, linux-efi, Ingo Molnar,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4e46c2a956215482418d7b315749fb1b6c6bc224 ]
The UEFI spec revision 2.7 errata A section 8.4 has the following to
say about the virtual memory runtime services:
"This section contains function definitions for the virtual memory
support that may be optionally used by an operating system at runtime.
If an operating system chooses to make EFI runtime service calls in a
virtual addressing mode instead of the flat physical mode, then the
operating system must use the services in this section to switch the
EFI runtime services from flat physical addressing to virtual
addressing."
So it is pretty clear that calling SetVirtualAddressMap() is entirely
optional, and so there is no point in doing so unless it achieves
anything useful for us.
This is not the case for 64-bit ARM. The identity mapping used by the
firmware is arbitrarily converted into another permutation of userland
addresses (i.e., bits [63:48] cleared), and the runtime code could easily
deal with the original layout in exactly the same way as it deals with
the converted layout. However, due to constraints related to page size
differences if the OS is not running with 4k pages, and related to
systems that may expose the individual sections of PE/COFF runtime
modules as different memory regions, creating the virtual layout is a
bit fiddly, and requires us to sort the memory map and reason about
adjacent regions with identical memory types etc etc.
So the obvious fix is to stop calling SetVirtualAddressMap() altogether
on arm64 systems. However, to avoid surprises, which are notoriously
hard to diagnose when it comes to OS<->firmware interactions, let's
start by making it an opt-out feature, and implement support for the
'efi=novamap' kernel command line parameter on ARM and arm64 systems.
( Note that 32-bit ARM generally does require SetVirtualAddressMap() to be
used, given that the physical memory map and the kernel virtual address
map are not guaranteed to be non-overlapping like on arm64. However,
having support for efi=novamap,noruntime on 32-bit ARM, combined with
the recently proposed support for earlycon=efifb, is likely to be useful
to diagnose boot issues on such systems if they have no accessible serial
port. )
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/efi/libstub/arm-stub.c | 5 +++++
drivers/firmware/efi/libstub/efi-stub-helper.c | 10 ++++++++++
drivers/firmware/efi/libstub/efistub.h | 1 +
drivers/firmware/efi/libstub/fdt.c | 3 +++
4 files changed, 19 insertions(+)
diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c
index 6920033de6d4..6c09644d620e 100644
--- a/drivers/firmware/efi/libstub/arm-stub.c
+++ b/drivers/firmware/efi/libstub/arm-stub.c
@@ -340,6 +340,11 @@ void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size,
paddr = in->phys_addr;
size = in->num_pages * EFI_PAGE_SIZE;
+ if (novamap()) {
+ in->virt_addr = in->phys_addr;
+ continue;
+ }
+
/*
* Make the mapping compatible with 64k pages: this allows
* a 4k page size kernel to kexec a 64k page size kernel and
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index e94975f4655b..442f51c2a53d 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -34,6 +34,7 @@ static unsigned long __chunk_size = EFI_READ_CHUNK_SIZE;
static int __section(.data) __nokaslr;
static int __section(.data) __quiet;
+static int __section(.data) __novamap;
int __pure nokaslr(void)
{
@@ -43,6 +44,10 @@ int __pure is_quiet(void)
{
return __quiet;
}
+int __pure novamap(void)
+{
+ return __novamap;
+}
#define EFI_MMAP_NR_SLACK_SLOTS 8
@@ -482,6 +487,11 @@ efi_status_t efi_parse_options(char const *cmdline)
__chunk_size = -1UL;
}
+ if (!strncmp(str, "novamap", 7)) {
+ str += strlen("novamap");
+ __novamap = 1;
+ }
+
/* Group words together, delimited by "," */
while (*str && *str != ' ' && *str != ',')
str++;
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index 32799cf039ef..337b52c4702c 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -27,6 +27,7 @@
extern int __pure nokaslr(void);
extern int __pure is_quiet(void);
+extern int __pure novamap(void);
#define pr_efi(sys_table, msg) do { \
if (!is_quiet()) efi_printk(sys_table, "EFI stub: "msg); \
diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
index 0c0d2312f4a8..dba296a44f4e 100644
--- a/drivers/firmware/efi/libstub/fdt.c
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -327,6 +327,9 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
if (status == EFI_SUCCESS) {
efi_set_virtual_address_map_t *svam;
+ if (novamap())
+ return EFI_SUCCESS;
+
/* Install the new virtual address map */
svam = sys_table->runtime->set_virtual_address_map;
status = svam(runtime_entry_count * desc_size, desc_size,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 138/187] soc: qcom: gsbi: Fix error handling in gsbi_probe()
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (136 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 137/187] efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 139/187] mt7601u: bump supported EEPROM version Greg Kroah-Hartman
` (53 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexey Khoroshilov, Bjorn Andersson,
Andy Gross, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8cd09a3dd3e176c62da67efcd477a44a8d87185e ]
If of_platform_populate() fails in gsbi_probe(),
gsbi->hclk is left undisabled.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/qcom/qcom_gsbi.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c
index 09c669e70d63..038abc377fdb 100644
--- a/drivers/soc/qcom/qcom_gsbi.c
+++ b/drivers/soc/qcom/qcom_gsbi.c
@@ -138,7 +138,7 @@ static int gsbi_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
struct gsbi_info *gsbi;
- int i;
+ int i, ret;
u32 mask, gsbi_num;
const struct crci_config *config = NULL;
@@ -221,7 +221,10 @@ static int gsbi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, gsbi);
- return of_platform_populate(node, NULL, NULL, &pdev->dev);
+ ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
+ if (ret)
+ clk_disable_unprepare(gsbi->hclk);
+ return ret;
}
static int gsbi_remove(struct platform_device *pdev)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 139/187] mt7601u: bump supported EEPROM version
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (137 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 138/187] soc: qcom: gsbi: Fix error handling in gsbi_probe() Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 140/187] ARM: 8830/1: NOMMU: Toggle only bits in EXC_RETURN we are really care of Greg Kroah-Hartman
` (52 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislaw Gruszka, Jakub Kicinski,
Kalle Valo, Sasha Levin, Michael
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3bd1505fed71d834f45e87b32ff07157fdda47e0 ]
As reported by Michael eeprom 0d is supported and work with the driver.
Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param
with 0d EEPORM looks like this:
RSSI offset: 0 0
Reference temp: f9
LNA gain: 8
Reg channels: 1-14
Per rate power:
raw:05 bw20:05 bw40:05
raw:05 bw20:05 bw40:05
raw:03 bw20:03 bw40:03
raw:03 bw20:03 bw40:03
raw:04 bw20:04 bw40:04
raw:00 bw20:00 bw40:00
raw:00 bw20:00 bw40:00
raw:00 bw20:00 bw40:00
raw:02 bw20:02 bw40:02
raw:00 bw20:00 bw40:00
Per channel power:
tx_power ch1:09 ch2:09
tx_power ch3:0a ch4:0a
tx_power ch5:0a ch6:0a
tx_power ch7:0b ch8:0b
tx_power ch9:0b ch10:0b
tx_power ch11:0b ch12:0b
tx_power ch13:0b ch14:0b
Reported-and-tested-by: Michael <ZeroBeat@gmx.de>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/eeprom.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.h b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
index 662d12703b69..57b503ae63f1 100644
--- a/drivers/net/wireless/mediatek/mt7601u/eeprom.h
+++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
@@ -17,7 +17,7 @@
struct mt7601u_dev;
-#define MT7601U_EE_MAX_VER 0x0c
+#define MT7601U_EE_MAX_VER 0x0d
#define MT7601U_EEPROM_SIZE 256
#define MT7601U_DEFAULT_TX_POWER 6
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 140/187] ARM: 8830/1: NOMMU: Toggle only bits in EXC_RETURN we are really care of
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (138 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 139/187] mt7601u: bump supported EEPROM version Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 141/187] ARM: avoid Cortex-A9 livelock on tight dmb loops Greg Kroah-Hartman
` (51 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladimir Murzin, Russell King, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 72cd4064fccaae15ab84d40d4be23667402df4ed ]
ARMv8M introduces support for Security extension to M class, among
other things it affects exception handling, especially, encoding of
EXC_RETURN.
The new bits have been added:
Bit [6] Secure or Non-secure stack
Bit [5] Default callee register stacking
Bit [0] Exception Secure
which conflicts with hard-coded value of EXC_RETURN:
In fact, we only care of few bits:
Bit [3] Mode (0 - Handler, 1 - Thread)
Bit [2] Stack pointer selection (0 - Main, 1 - Process)
We can toggle only those bits and left other bits as they were on
exception entry.
It is basically, what patch does - saves EXC_RETURN when we do
transition form Thread to Handler mode (it is first svc), so later
saved value is used instead of EXC_RET_THREADMODE_PROCESSSTACK.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/include/asm/v7m.h | 2 +-
| 3 ++-
arch/arm/kernel/entry-v7m.S | 4 ++++
arch/arm/mm/proc-v7m.S | 3 +++
4 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h
index 187ccf6496ad..2cb00d15831b 100644
--- a/arch/arm/include/asm/v7m.h
+++ b/arch/arm/include/asm/v7m.h
@@ -49,7 +49,7 @@
* (0 -> msp; 1 -> psp). Bits [1:0] are fixed to 0b01.
*/
#define EXC_RET_STACK_MASK 0x00000004
-#define EXC_RET_THREADMODE_PROCESSSTACK 0xfffffffd
+#define EXC_RET_THREADMODE_PROCESSSTACK (3 << 2)
/* Cache related definitions */
--git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 773424843d6e..62db1c9746cb 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -127,7 +127,8 @@
*/
.macro v7m_exception_slow_exit ret_r0
cpsid i
- ldr lr, =EXC_RET_THREADMODE_PROCESSSTACK
+ ldr lr, =exc_ret
+ ldr lr, [lr]
@ read original r12, sp, lr, pc and xPSR
add r12, sp, #S_IP
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index abcf47848525..19d2dcd6530d 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -146,3 +146,7 @@ ENTRY(vector_table)
.rept CONFIG_CPU_V7M_NUM_IRQ
.long __irq_entry @ External Interrupts
.endr
+ .align 2
+ .globl exc_ret
+exc_ret:
+ .space 4
diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
index 47a5acc64433..92e84181933a 100644
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S
@@ -139,6 +139,9 @@ __v7m_setup_cont:
cpsie i
svc #0
1: cpsid i
+ ldr r0, =exc_ret
+ orr lr, lr, #EXC_RET_THREADMODE_PROCESSSTACK
+ str lr, [r0]
ldmia sp, {r0-r3, r12}
str r5, [r12, #11 * 4] @ restore the original SVC vector entry
mov lr, r6 @ restore LR
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 141/187] ARM: avoid Cortex-A9 livelock on tight dmb loops
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (139 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 140/187] ARM: 8830/1: NOMMU: Toggle only bits in EXC_RETURN we are really care of Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:47 ` [PATCH 4.19 142/187] block, bfq: fix in-service-queue check for queue merging Greg Kroah-Hartman
` (50 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Will Deacon, Russell King, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5388a5b82199facacd3d7ac0d05aca6e8f902fed ]
machine_crash_nonpanic_core() does this:
while (1)
cpu_relax();
because the kernel has crashed, and we have no known safe way to deal
with the CPU. So, we place the CPU into an infinite loop which we
expect it to never exit - at least not until the system as a whole is
reset by some method.
In the absence of erratum 754327, this code assembles to:
b .
In other words, an infinite loop. When erratum 754327 is enabled,
this becomes:
1: dmb
b 1b
It has been observed that on some systems (eg, OMAP4) where, if a
crash is triggered, the system tries to kexec into the panic kernel,
but fails after taking the secondary CPU down - placing it into one
of these loops. This causes the system to livelock, and the most
noticable effect is the system stops after issuing:
Loading crashdump kernel...
to the system console.
The tested as working solution I came up with was to add wfe() to
these infinite loops thusly:
while (1) {
cpu_relax();
wfe();
}
which, without 754327 builds to:
1: wfe
b 1b
or with 754327 is enabled:
1: dmb
wfe
b 1b
Adding "wfe" does two things depending on the environment we're running
under:
- where we're running on bare metal, and the processor implements
"wfe", it stops us spinning endlessly in a loop where we're never
going to do any useful work.
- if we're running in a VM, it allows the CPU to be given back to the
hypervisor and rescheduled for other purposes (maybe a different VM)
rather than wasting CPU cycles inside a crashed VM.
However, in light of erratum 794072, Will Deacon wanted to see 10 nops
as well - which is reasonable to cover the case where we have erratum
754327 enabled _and_ we have a processor that doesn't implement the
wfe hint.
So, we now end up with:
1: wfe
b 1b
when erratum 754327 is disabled, or:
1: dmb
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
wfe
b 1b
when erratum 754327 is enabled. We also get the dmb + 10 nop
sequence elsewhere in the kernel, in terminating loops.
This is reasonable - it means we get the workaround for erratum
794072 when erratum 754327 is enabled, but still relinquish the dead
processor - either by placing it in a lower power mode when wfe is
implemented as such or by returning it to the hypervisior, or in the
case where wfe is a no-op, we use the workaround specified in erratum
794072 to avoid the problem.
These as two entirely orthogonal problems - the 10 nops addresses
erratum 794072, and the wfe is an optimisation that makes the system
more efficient when crashed either in terms of power consumption or
by allowing the host/other VMs to make use of the CPU.
I don't see any reason not to use kexec() inside a VM - it has the
potential to provide automated recovery from a failure of the VMs
kernel with the opportunity for saving a crashdump of the failure.
A panic() with a reboot timeout won't do that, and reading the
libvirt documentation, setting on_reboot to "preserve" won't either
(the documentation states "The preserve action for an on_reboot event
is treated as a destroy".) Surely it has to be a good thing to
avoiding having CPUs spinning inside a VM that is doing no useful
work.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/include/asm/barrier.h | 2 ++
arch/arm/include/asm/processor.h | 6 +++++-
arch/arm/kernel/machine_kexec.c | 5 ++++-
arch/arm/kernel/smp.c | 4 +++-
arch/arm/mach-omap2/prm_common.c | 4 +++-
5 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 69772e742a0a..83ae97c049d9 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -11,6 +11,8 @@
#define sev() __asm__ __volatile__ ("sev" : : : "memory")
#define wfe() __asm__ __volatile__ ("wfe" : : : "memory")
#define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define wfe() do { } while (0)
#endif
#if __LINUX_ARM_ARCH__ >= 7
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 1bf65b47808a..cb2a3423b714 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -95,7 +95,11 @@ extern void release_thread(struct task_struct *);
unsigned long get_wchan(struct task_struct *p);
#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
-#define cpu_relax() smp_mb()
+#define cpu_relax() \
+ do { \
+ smp_mb(); \
+ __asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \
+ } while (0)
#else
#define cpu_relax() barrier()
#endif
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index dd2eb5f76b9f..76300f3813e8 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -91,8 +91,11 @@ void machine_crash_nonpanic_core(void *unused)
set_cpu_online(smp_processor_id(), false);
atomic_dec(&waiting_for_crash_ipi);
- while (1)
+
+ while (1) {
cpu_relax();
+ wfe();
+ }
}
void crash_smp_send_stop(void)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 1d6f5ea522f4..a3ce7c5365fa 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -604,8 +604,10 @@ static void ipi_cpu_stop(unsigned int cpu)
local_fiq_disable();
local_irq_disable();
- while (1)
+ while (1) {
cpu_relax();
+ wfe();
+ }
}
static DEFINE_PER_CPU(struct completion *, cpu_completion);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 058a37e6d11c..fd6e0671f957 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -523,8 +523,10 @@ void omap_prm_reset_system(void)
prm_ll_data->reset_system();
- while (1)
+ while (1) {
cpu_relax();
+ wfe();
+ }
}
/**
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 142/187] block, bfq: fix in-service-queue check for queue merging
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (140 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 141/187] ARM: avoid Cortex-A9 livelock on tight dmb loops Greg Kroah-Hartman
@ 2019-04-04 8:47 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 143/187] bpf: fix missing prototype warnings Greg Kroah-Hartman
` (49 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:47 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Valente, Jens Axboe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 058fdecc6de7cdecbf4c59b851e80eb2d6c5295f ]
When a new I/O request arrives for a bfq_queue, say Q, bfq checks
whether that request is close to
(a) the head request of some other queue waiting to be served, or
(b) the last request dispatched for the in-service queue (in case Q
itself is not the in-service queue)
If a queue, say Q2, is found for which the above condition holds, then
bfq merges Q and Q2, to hopefully get a more sequential I/O in the
resulting merged queue, and thus a possibly higher throughput.
Case (b) is checked by comparing the new request for Q with the last
request dispatched, assuming that the latter necessarily belonged to the
in-service queue. Unfortunately, this assumption is no longer always
correct, since commit d0edc2473be9 ("block, bfq: inject other-queue I/O
into seeky idle queues on NCQ flash").
When the assumption does not hold, queues that must not be merged may be
merged, causing unexpected loss of control on per-queue service
guarantees.
This commit solves this problem by adding an extra field, which stores
the actual last request dispatched for the in-service queue, and by
using this new field to correctly check case (b).
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
block/bfq-iosched.c | 5 ++++-
block/bfq-iosched.h | 3 +++
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 653100fb719e..c5e2c5a01182 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -2215,7 +2215,8 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
if (in_service_bfqq && in_service_bfqq != bfqq &&
likely(in_service_bfqq != &bfqd->oom_bfqq) &&
- bfq_rq_close_to_sector(io_struct, request, bfqd->last_position) &&
+ bfq_rq_close_to_sector(io_struct, request,
+ bfqd->in_serv_last_pos) &&
bfqq->entity.parent == in_service_bfqq->entity.parent &&
bfq_may_be_close_cooperator(bfqq, in_service_bfqq)) {
new_bfqq = bfq_setup_merge(bfqq, in_service_bfqq);
@@ -2755,6 +2756,8 @@ update_rate_and_reset:
bfq_update_rate_reset(bfqd, rq);
update_last_values:
bfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq);
+ if (RQ_BFQQ(rq) == bfqd->in_service_queue)
+ bfqd->in_serv_last_pos = bfqd->last_position;
bfqd->last_dispatch = now_ns;
}
diff --git a/block/bfq-iosched.h b/block/bfq-iosched.h
index a8a2e5aca4d4..d5e9e60cb1a5 100644
--- a/block/bfq-iosched.h
+++ b/block/bfq-iosched.h
@@ -469,6 +469,9 @@ struct bfq_data {
/* on-disk position of the last served request */
sector_t last_position;
+ /* position of the last served request for the in-service queue */
+ sector_t in_serv_last_pos;
+
/* time of last request completion (ns) */
u64 last_completion;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 143/187] bpf: fix missing prototype warnings
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (141 preceding siblings ...)
2019-04-04 8:47 ` [PATCH 4.19 142/187] block, bfq: fix in-service-queue check for queue merging Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 144/187] selftests/bpf: skip verifier tests for unsupported program types Greg Kroah-Hartman
` (48 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Valdis Kletnieks, Song Liu,
Daniel Borkmann, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 116bfa96a255123ed209da6544f74a4f2eaca5da ]
Compiling with W=1 generates warnings:
CC kernel/bpf/core.o
kernel/bpf/core.c:721:12: warning: no previous prototype for ?bpf_jit_alloc_exec_limit? [-Wmissing-prototypes]
721 | u64 __weak bpf_jit_alloc_exec_limit(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/core.c:757:14: warning: no previous prototype for ?bpf_jit_alloc_exec? [-Wmissing-prototypes]
757 | void *__weak bpf_jit_alloc_exec(unsigned long size)
| ^~~~~~~~~~~~~~~~~~
kernel/bpf/core.c:762:13: warning: no previous prototype for ?bpf_jit_free_exec? [-Wmissing-prototypes]
762 | void __weak bpf_jit_free_exec(void *addr)
| ^~~~~~~~~~~~~~~~~
All three are weak functions that archs can override, provide
proper prototypes for when a new arch provides their own.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/filter.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 1a39d57eb88f..037610845892 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -844,7 +844,9 @@ bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr,
unsigned int alignment,
bpf_jit_fill_hole_t bpf_fill_ill_insns);
void bpf_jit_binary_free(struct bpf_binary_header *hdr);
-
+u64 bpf_jit_alloc_exec_limit(void);
+void *bpf_jit_alloc_exec(unsigned long size);
+void bpf_jit_free_exec(void *addr);
void bpf_jit_free(struct bpf_prog *fp);
struct bpf_prog *bpf_jit_blind_constants(struct bpf_prog *fp);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 144/187] selftests/bpf: skip verifier tests for unsupported program types
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (142 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 143/187] bpf: fix missing prototype warnings Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-05-23 10:27 ` Rantala, Tommi T. (Nokia - FI/Espoo)
2019-04-04 8:48 ` [PATCH 4.19 145/187] powerpc/64s: Clear on-stack exception marker upon exception return Greg Kroah-Hartman
` (47 subsequent siblings)
191 siblings, 1 reply; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Fomichev, Daniel Borkmann,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8184d44c9a577a2f1842ed6cc844bfd4a9981d8e ]
Use recently introduced bpf_probe_prog_type() to skip tests in the
test_verifier() if bpf_verify_program() fails. The skipped test is
indicated in the output.
Example:
...
679/p bpf_get_stack return R0 within range SKIP (unsupported program
type 5)
680/p ld_abs: invalid op 1 OK
...
Summary: 863 PASSED, 165 SKIPPED, 3 FAILED
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/bpf/test_verifier.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 9db5a7378f40..294fc18aba2a 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -32,6 +32,7 @@
#include <linux/if_ether.h>
#include <bpf/bpf.h>
+#include <bpf/libbpf.h>
#ifdef HAVE_GENHDR
# include "autoconf.h"
@@ -56,6 +57,7 @@
#define UNPRIV_SYSCTL "kernel/unprivileged_bpf_disabled"
static bool unpriv_disabled = false;
+static int skips;
struct bpf_test {
const char *descr;
@@ -12770,6 +12772,11 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
prog, prog_len, test->flags & F_LOAD_WITH_STRICT_ALIGNMENT,
"GPL", 0, bpf_vlog, sizeof(bpf_vlog), 1);
+ if (fd_prog < 0 && !bpf_probe_prog_type(prog_type, 0)) {
+ printf("SKIP (unsupported program type %d)\n", prog_type);
+ skips++;
+ goto close_fds;
+ }
expected_ret = unpriv && test->result_unpriv != UNDEF ?
test->result_unpriv : test->result;
@@ -12905,7 +12912,7 @@ static void get_unpriv_disabled()
static int do_test(bool unpriv, unsigned int from, unsigned int to)
{
- int i, passes = 0, errors = 0, skips = 0;
+ int i, passes = 0, errors = 0;
for (i = from; i < to; i++) {
struct bpf_test *test = &tests[i];
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* Re: [PATCH 4.19 144/187] selftests/bpf: skip verifier tests for unsupported program types
2019-04-04 8:48 ` [PATCH 4.19 144/187] selftests/bpf: skip verifier tests for unsupported program types Greg Kroah-Hartman
@ 2019-05-23 10:27 ` Rantala, Tommi T. (Nokia - FI/Espoo)
2019-05-23 13:46 ` Daniel Borkmann
0 siblings, 1 reply; 196+ messages in thread
From: Rantala, Tommi T. (Nokia - FI/Espoo) @ 2019-05-23 10:27 UTC (permalink / raw)
To: linux-kernel, gregkh; +Cc: daniel, sashal, stable, sdf
On Thu, 2019-04-04 at 10:48 +0200, Greg Kroah-Hartman wrote:
> 4.19-stable review patch. If anyone has any objections, please let
> me know.
>
> ------------------
>
> [ Upstream commit 8184d44c9a577a2f1842ed6cc844bfd4a9981d8e ]
>
> Use recently introduced bpf_probe_prog_type() to skip tests in the
> test_verifier() if bpf_verify_program() fails. The skipped test is
> indicated in the output.
Hi, this patch added in 4.19.34 causes test_verifier build failure, as
bpf_probe_prog_type() is not available:
gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf
-I../../../../include/generated -DHAVE_GENHDR
-I../../../include test_verifier.c /root/linux-
4.19.44/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread
-o /root/linux-4.19.44/tools/testing/selftests/bpf/test_verifier
test_verifier.c: In function ‘do_test_single’:
test_verifier.c:12775:22: warning: implicit declaration of function
‘bpf_probe_prog_type’; did you mean ‘bpf_program__set_type’? [-
Wimplicit-function-declaration]
if (fd_prog < 0 && !bpf_probe_prog_type(prog_type, 0)) {
^~~~~~~~~~~~~~~~~~~
bpf_program__set_type
/usr/bin/ld: /tmp/ccEtyLhk.o: in function `do_test_single':
test_verifier.c:(.text+0xa19): undefined reference to
`bpf_probe_prog_type'
collect2: error: ld returned 1 exit status
make[1]: *** [../lib.mk:152: /root/linux-
4.19.44/tools/testing/selftests/bpf/test_verifier] Error 1
- Tommi
> Example:
>
> ...
> 679/p bpf_get_stack return R0 within range SKIP (unsupported program
> type 5)
> 680/p ld_abs: invalid op 1 OK
> ...
> Summary: 863 PASSED, 165 SKIPPED, 3 FAILED
>
> Signed-off-by: Stanislav Fomichev <sdf@google.com>
> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> tools/testing/selftests/bpf/test_verifier.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/tools/testing/selftests/bpf/test_verifier.c
> b/tools/testing/selftests/bpf/test_verifier.c
> index 9db5a7378f40..294fc18aba2a 100644
> --- a/tools/testing/selftests/bpf/test_verifier.c
> +++ b/tools/testing/selftests/bpf/test_verifier.c
> @@ -32,6 +32,7 @@
> #include <linux/if_ether.h>
>
> #include <bpf/bpf.h>
> +#include <bpf/libbpf.h>
>
> #ifdef HAVE_GENHDR
> # include "autoconf.h"
> @@ -56,6 +57,7 @@
>
> #define UNPRIV_SYSCTL "kernel/unprivileged_bpf_disabled"
> static bool unpriv_disabled = false;
> +static int skips;
>
> struct bpf_test {
> const char *descr;
> @@ -12770,6 +12772,11 @@ static void do_test_single(struct bpf_test
> *test, bool unpriv,
> fd_prog = bpf_verify_program(prog_type ? :
> BPF_PROG_TYPE_SOCKET_FILTER,
> prog, prog_len, test->flags &
> F_LOAD_WITH_STRICT_ALIGNMENT,
> "GPL", 0, bpf_vlog,
> sizeof(bpf_vlog), 1);
> + if (fd_prog < 0 && !bpf_probe_prog_type(prog_type, 0)) {
> + printf("SKIP (unsupported program type %d)\n",
> prog_type);
> + skips++;
> + goto close_fds;
> + }
>
> expected_ret = unpriv && test->result_unpriv != UNDEF ?
> test->result_unpriv : test->result;
> @@ -12905,7 +12912,7 @@ static void get_unpriv_disabled()
>
> static int do_test(bool unpriv, unsigned int from, unsigned int to)
> {
> - int i, passes = 0, errors = 0, skips = 0;
> + int i, passes = 0, errors = 0;
>
> for (i = from; i < to; i++) {
> struct bpf_test *test = &tests[i];
^ permalink raw reply [flat|nested] 196+ messages in thread* Re: [PATCH 4.19 144/187] selftests/bpf: skip verifier tests for unsupported program types
2019-05-23 10:27 ` Rantala, Tommi T. (Nokia - FI/Espoo)
@ 2019-05-23 13:46 ` Daniel Borkmann
2019-05-23 17:47 ` gregkh
0 siblings, 1 reply; 196+ messages in thread
From: Daniel Borkmann @ 2019-05-23 13:46 UTC (permalink / raw)
To: Rantala, Tommi T. (Nokia - FI/Espoo), linux-kernel, gregkh
Cc: sashal, stable, sdf
On 05/23/2019 12:27 PM, Rantala, Tommi T. (Nokia - FI/Espoo) wrote:
> On Thu, 2019-04-04 at 10:48 +0200, Greg Kroah-Hartman wrote:
>> 4.19-stable review patch. If anyone has any objections, please let
>> me know.
>>
>> ------------------
>>
>> [ Upstream commit 8184d44c9a577a2f1842ed6cc844bfd4a9981d8e ]
>>
>> Use recently introduced bpf_probe_prog_type() to skip tests in the
>> test_verifier() if bpf_verify_program() fails. The skipped test is
>> indicated in the output.
>
> Hi, this patch added in 4.19.34 causes test_verifier build failure, as
> bpf_probe_prog_type() is not available:
>
> gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf
> -I../../../../include/generated -DHAVE_GENHDR
> -I../../../include test_verifier.c /root/linux-
> 4.19.44/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread
> -o /root/linux-4.19.44/tools/testing/selftests/bpf/test_verifier
> test_verifier.c: In function ‘do_test_single’:
> test_verifier.c:12775:22: warning: implicit declaration of function
> ‘bpf_probe_prog_type’; did you mean ‘bpf_program__set_type’? [-
> Wimplicit-function-declaration]
> if (fd_prog < 0 && !bpf_probe_prog_type(prog_type, 0)) {
> ^~~~~~~~~~~~~~~~~~~
> bpf_program__set_type
> /usr/bin/ld: /tmp/ccEtyLhk.o: in function `do_test_single':
> test_verifier.c:(.text+0xa19): undefined reference to
> `bpf_probe_prog_type'
> collect2: error: ld returned 1 exit status
> make[1]: *** [../lib.mk:152: /root/linux-
> 4.19.44/tools/testing/selftests/bpf/test_verifier] Error 1
Looks like this kselftest one got auto-selected for stable? It's not
strictly needed, so totally fine to drop.
Thanks,
Daniel
^ permalink raw reply [flat|nested] 196+ messages in thread* Re: [PATCH 4.19 144/187] selftests/bpf: skip verifier tests for unsupported program types
2019-05-23 13:46 ` Daniel Borkmann
@ 2019-05-23 17:47 ` gregkh
0 siblings, 0 replies; 196+ messages in thread
From: gregkh @ 2019-05-23 17:47 UTC (permalink / raw)
To: Daniel Borkmann
Cc: Rantala, Tommi T. (Nokia - FI/Espoo), linux-kernel, sashal, stable, sdf
On Thu, May 23, 2019 at 03:46:26PM +0200, Daniel Borkmann wrote:
> On 05/23/2019 12:27 PM, Rantala, Tommi T. (Nokia - FI/Espoo) wrote:
> > On Thu, 2019-04-04 at 10:48 +0200, Greg Kroah-Hartman wrote:
> >> 4.19-stable review patch. If anyone has any objections, please let
> >> me know.
> >>
> >> ------------------
> >>
> >> [ Upstream commit 8184d44c9a577a2f1842ed6cc844bfd4a9981d8e ]
> >>
> >> Use recently introduced bpf_probe_prog_type() to skip tests in the
> >> test_verifier() if bpf_verify_program() fails. The skipped test is
> >> indicated in the output.
> >
> > Hi, this patch added in 4.19.34 causes test_verifier build failure, as
> > bpf_probe_prog_type() is not available:
> >
> > gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf
> > -I../../../../include/generated -DHAVE_GENHDR
> > -I../../../include test_verifier.c /root/linux-
> > 4.19.44/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread
> > -o /root/linux-4.19.44/tools/testing/selftests/bpf/test_verifier
> > test_verifier.c: In function ‘do_test_single’:
> > test_verifier.c:12775:22: warning: implicit declaration of function
> > ‘bpf_probe_prog_type’; did you mean ‘bpf_program__set_type’? [-
> > Wimplicit-function-declaration]
> > if (fd_prog < 0 && !bpf_probe_prog_type(prog_type, 0)) {
> > ^~~~~~~~~~~~~~~~~~~
> > bpf_program__set_type
> > /usr/bin/ld: /tmp/ccEtyLhk.o: in function `do_test_single':
> > test_verifier.c:(.text+0xa19): undefined reference to
> > `bpf_probe_prog_type'
> > collect2: error: ld returned 1 exit status
> > make[1]: *** [../lib.mk:152: /root/linux-
> > 4.19.44/tools/testing/selftests/bpf/test_verifier] Error 1
>
> Looks like this kselftest one got auto-selected for stable? It's not
> strictly needed, so totally fine to drop.
Ok, will go revert this, sorry for the breakage.
greg k-h
^ permalink raw reply [flat|nested] 196+ messages in thread
* [PATCH 4.19 145/187] powerpc/64s: Clear on-stack exception marker upon exception return
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (143 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 144/187] selftests/bpf: skip verifier tests for unsupported program types Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 146/187] cgroup/pids: turn cgroup_subsys->free() into cgroup_subsys->release() to fix the accounting Greg Kroah-Hartman
` (46 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joe Lawrence, Nicolai Stange,
Michael Ellerman, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit eddd0b332304d554ad6243942f87c2fcea98c56b ]
The ppc64 specific implementation of the reliable stacktracer,
save_stack_trace_tsk_reliable(), bails out and reports an "unreliable
trace" whenever it finds an exception frame on the stack. Stack frames
are classified as exception frames if the STACK_FRAME_REGS_MARKER
magic, as written by exception prologues, is found at a particular
location.
However, as observed by Joe Lawrence, it is possible in practice that
non-exception stack frames can alias with prior exception frames and
thus, that the reliable stacktracer can find a stale
STACK_FRAME_REGS_MARKER on the stack. It in turn falsely reports an
unreliable stacktrace and blocks any live patching transition to
finish. Said condition lasts until the stack frame is
overwritten/initialized by function call or other means.
In principle, we could mitigate this by making the exception frame
classification condition in save_stack_trace_tsk_reliable() stronger:
in addition to testing for STACK_FRAME_REGS_MARKER, we could also take
into account that for all exceptions executing on the kernel stack
- their stack frames's backlink pointers always match what is saved
in their pt_regs instance's ->gpr[1] slot and that
- their exception frame size equals STACK_INT_FRAME_SIZE, a value
uncommonly large for non-exception frames.
However, while these are currently true, relying on them would make
the reliable stacktrace implementation more sensitive towards future
changes in the exception entry code. Note that false negatives, i.e.
not detecting exception frames, would silently break the live patching
consistency model.
Furthermore, certain other places (diagnostic stacktraces, perf, xmon)
rely on STACK_FRAME_REGS_MARKER as well.
Make the exception exit code clear the on-stack
STACK_FRAME_REGS_MARKER for those exceptions running on the "normal"
kernel stack and returning to kernelspace: because the topmost frame
is ignored by the reliable stack tracer anyway, returns to userspace
don't need to take care of clearing the marker.
Furthermore, as I don't have the ability to test this on Book 3E or 32
bits, limit the change to Book 3S and 64 bits.
Fixes: df78d3f61480 ("powerpc/livepatch: Implement reliable stack tracing for the consistency model")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/kernel/entry_64.S | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index c806a3c12592..7a46e0e57a36 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -994,6 +994,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r2,_NIP(r1)
mtspr SPRN_SRR0,r2
+ /*
+ * Leaving a stale exception_marker on the stack can confuse
+ * the reliable stack unwinder later on. Clear it.
+ */
+ li r2,0
+ std r2,STACK_FRAME_OVERHEAD-16(r1)
+
ld r0,GPR0(r1)
ld r2,GPR2(r1)
ld r3,GPR3(r1)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 146/187] cgroup/pids: turn cgroup_subsys->free() into cgroup_subsys->release() to fix the accounting
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (144 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 145/187] powerpc/64s: Clear on-stack exception marker upon exception return Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 147/187] backlight: pwm_bl: Use gpiod_get_value_cansleep() to get initial state Greg Kroah-Hartman
` (45 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Herton R. Krzesinski, Jan Stancek,
Oleg Nesterov, Tejun Heo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 51bee5abeab2058ea5813c5615d6197a23dbf041 ]
The only user of cgroup_subsys->free() callback is pids_cgrp_subsys which
needs pids_free() to uncharge the pid.
However, ->free() is called from __put_task_struct()->cgroup_free() and this
is too late. Even the trivial program which does
for (;;) {
int pid = fork();
assert(pid >= 0);
if (pid)
wait(NULL);
else
exit(0);
}
can run out of limits because release_task()->call_rcu(delayed_put_task_struct)
implies an RCU gp after the task/pid goes away and before the final put().
Test-case:
mkdir -p /tmp/CG
mount -t cgroup2 none /tmp/CG
echo '+pids' > /tmp/CG/cgroup.subtree_control
mkdir /tmp/CG/PID
echo 2 > /tmp/CG/PID/pids.max
perl -e 'while ($p = fork) { wait; } $p // die "fork failed: $!\n"' &
echo $! > /tmp/CG/PID/cgroup.procs
Without this patch the forking process fails soon after migration.
Rename cgroup_subsys->free() to cgroup_subsys->release() and move the callsite
into the new helper, cgroup_release(), called by release_task() which actually
frees the pid(s).
Reported-by: Herton R. Krzesinski <hkrzesin@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/cgroup-defs.h | 2 +-
include/linux/cgroup.h | 2 ++
kernel/cgroup/cgroup.c | 15 +++++++++------
kernel/cgroup/pids.c | 4 ++--
kernel/exit.c | 1 +
5 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index 22254c1fe1c5..6002275937f5 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -597,7 +597,7 @@ struct cgroup_subsys {
void (*cancel_fork)(struct task_struct *task);
void (*fork)(struct task_struct *task);
void (*exit)(struct task_struct *task);
- void (*free)(struct task_struct *task);
+ void (*release)(struct task_struct *task);
void (*bind)(struct cgroup_subsys_state *root_css);
bool early_init:1;
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 32c553556bbd..ca51b2c15bcc 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -119,6 +119,7 @@ extern int cgroup_can_fork(struct task_struct *p);
extern void cgroup_cancel_fork(struct task_struct *p);
extern void cgroup_post_fork(struct task_struct *p);
void cgroup_exit(struct task_struct *p);
+void cgroup_release(struct task_struct *p);
void cgroup_free(struct task_struct *p);
int cgroup_init_early(void);
@@ -699,6 +700,7 @@ static inline int cgroup_can_fork(struct task_struct *p) { return 0; }
static inline void cgroup_cancel_fork(struct task_struct *p) {}
static inline void cgroup_post_fork(struct task_struct *p) {}
static inline void cgroup_exit(struct task_struct *p) {}
+static inline void cgroup_release(struct task_struct *p) {}
static inline void cgroup_free(struct task_struct *p) {}
static inline int cgroup_init_early(void) { return 0; }
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index e710ac7fbbbf..63dae7e0ccae 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -195,7 +195,7 @@ static u64 css_serial_nr_next = 1;
*/
static u16 have_fork_callback __read_mostly;
static u16 have_exit_callback __read_mostly;
-static u16 have_free_callback __read_mostly;
+static u16 have_release_callback __read_mostly;
static u16 have_canfork_callback __read_mostly;
/* cgroup namespace for init task */
@@ -5240,7 +5240,7 @@ static void __init cgroup_init_subsys(struct cgroup_subsys *ss, bool early)
have_fork_callback |= (bool)ss->fork << ss->id;
have_exit_callback |= (bool)ss->exit << ss->id;
- have_free_callback |= (bool)ss->free << ss->id;
+ have_release_callback |= (bool)ss->release << ss->id;
have_canfork_callback |= (bool)ss->can_fork << ss->id;
/* At system boot, before all subsystems have been
@@ -5676,16 +5676,19 @@ void cgroup_exit(struct task_struct *tsk)
} while_each_subsys_mask();
}
-void cgroup_free(struct task_struct *task)
+void cgroup_release(struct task_struct *task)
{
- struct css_set *cset = task_css_set(task);
struct cgroup_subsys *ss;
int ssid;
- do_each_subsys_mask(ss, ssid, have_free_callback) {
- ss->free(task);
+ do_each_subsys_mask(ss, ssid, have_release_callback) {
+ ss->release(task);
} while_each_subsys_mask();
+}
+void cgroup_free(struct task_struct *task)
+{
+ struct css_set *cset = task_css_set(task);
put_css_set(cset);
}
diff --git a/kernel/cgroup/pids.c b/kernel/cgroup/pids.c
index 9829c67ebc0a..c9960baaa14f 100644
--- a/kernel/cgroup/pids.c
+++ b/kernel/cgroup/pids.c
@@ -247,7 +247,7 @@ static void pids_cancel_fork(struct task_struct *task)
pids_uncharge(pids, 1);
}
-static void pids_free(struct task_struct *task)
+static void pids_release(struct task_struct *task)
{
struct pids_cgroup *pids = css_pids(task_css(task, pids_cgrp_id));
@@ -342,7 +342,7 @@ struct cgroup_subsys pids_cgrp_subsys = {
.cancel_attach = pids_cancel_attach,
.can_fork = pids_can_fork,
.cancel_fork = pids_cancel_fork,
- .free = pids_free,
+ .release = pids_release,
.legacy_cftypes = pids_files,
.dfl_cftypes = pids_files,
.threaded = true,
diff --git a/kernel/exit.c b/kernel/exit.c
index d607e23fd0c3..5c0964dc805a 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -219,6 +219,7 @@ repeat:
}
write_unlock_irq(&tasklist_lock);
+ cgroup_release(p);
release_thread(p);
call_rcu(&p->rcu, delayed_put_task_struct);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 147/187] backlight: pwm_bl: Use gpiod_get_value_cansleep() to get initial state
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (145 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 146/187] cgroup/pids: turn cgroup_subsys->free() into cgroup_subsys->release() to fix the accounting Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 148/187] tty: increase the default flip buffer limit to 2*640K Greg Kroah-Hartman
` (44 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chen-Yu Tsai, Maxime Ripard,
Daniel Thompson, Lee Jones, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cec2b18832e26bc866bef2be22eff4e25bbc4034 ]
gpiod_get_value() gives out a warning if access to the underlying gpiochip
requires sleeping, which is common for I2C based chips:
WARNING: CPU: 0 PID: 77 at drivers/gpio/gpiolib.c:2500 gpiod_get_value+0xd0/0x100
Modules linked in:
CPU: 0 PID: 77 Comm: kworker/0:2 Not tainted 4.14.0-rc3-00589-gf32897915d48-dirty #90
Hardware name: Allwinner sun4i/sun5i Families
Workqueue: events deferred_probe_work_func
[<c010ec50>] (unwind_backtrace) from [<c010b784>] (show_stack+0x10/0x14)
[<c010b784>] (show_stack) from [<c0797224>] (dump_stack+0x88/0x9c)
[<c0797224>] (dump_stack) from [<c0125b08>] (__warn+0xe8/0x100)
[<c0125b08>] (__warn) from [<c0125bd0>] (warn_slowpath_null+0x20/0x28)
[<c0125bd0>] (warn_slowpath_null) from [<c037069c>] (gpiod_get_value+0xd0/0x100)
[<c037069c>] (gpiod_get_value) from [<c03778d0>] (pwm_backlight_probe+0x238/0x508)
[<c03778d0>] (pwm_backlight_probe) from [<c0411a2c>] (platform_drv_probe+0x50/0xac)
[<c0411a2c>] (platform_drv_probe) from [<c0410224>] (driver_probe_device+0x238/0x2e8)
[<c0410224>] (driver_probe_device) from [<c040e820>] (bus_for_each_drv+0x44/0x94)
[<c040e820>] (bus_for_each_drv) from [<c040ff0c>] (__device_attach+0xb0/0x114)
[<c040ff0c>] (__device_attach) from [<c040f4f8>] (bus_probe_device+0x84/0x8c)
[<c040f4f8>] (bus_probe_device) from [<c040f944>] (deferred_probe_work_func+0x50/0x14c)
[<c040f944>] (deferred_probe_work_func) from [<c013be84>] (process_one_work+0x1ec/0x414)
[<c013be84>] (process_one_work) from [<c013ce5c>] (worker_thread+0x2b0/0x5a0)
[<c013ce5c>] (worker_thread) from [<c0141908>] (kthread+0x14c/0x154)
[<c0141908>] (kthread) from [<c0107ab0>] (ret_from_fork+0x14/0x24)
This was missed in commit 0c9501f823a4 ("backlight: pwm_bl: Handle gpio
that can sleep"). The code was then moved to a separate function in
commit 7613c922315e ("backlight: pwm_bl: Move the checks for initial power
state to a separate function").
The only usage of gpiod_get_value() is during the probe stage, which is
safe to sleep in. Switch to gpiod_get_value_cansleep().
Fixes: 0c9501f823a4 ("backlight: pwm_bl: Handle gpio that can sleep")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/backlight/pwm_bl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 6bde543452f2..7ddc0930e98c 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -425,7 +425,7 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
*/
/* if the enable GPIO is disabled, do not enable the backlight */
- if (pb->enable_gpio && gpiod_get_value(pb->enable_gpio) == 0)
+ if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0)
return FB_BLANK_POWERDOWN;
/* The regulator is disabled, do not enable the backlight */
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 148/187] tty: increase the default flip buffer limit to 2*640K
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (146 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 147/187] backlight: pwm_bl: Use gpiod_get_value_cansleep() to get initial state Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 149/187] powerpc/pseries: Perform full re-add of CPU for topology update post-migration Greg Kroah-Hartman
` (43 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manfred Schlaegl, Martin Kepplinger,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7ab57b76ebf632bf2231ccabe26bea33868118c6 ]
We increase the default limit for buffer memory allocation by a factor of
10 to 640K to prevent data loss when using fast serial interfaces.
For example when using RS485 without flow-control at speeds of 1Mbit/s
an upwards we've run into problems such as applications being too slow
to read out this buffer (on embedded devices based on imx53 or imx6).
If you want to write transmitted data to a slow SD card and thus have
realtime requirements, this limit can become a problem.
That shouldn't be the case and 640K buffers fix such problems for us.
This value is a maximum limit for allocation only. It has no effect
on systems that currently run fine. When transmission is slow enough
applications and hardware can keep up and increasing this limit
doesn't change anything.
It only _allows_ to allocate more than 2*64K in cases we currently fail to
allocate memory despite having some.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/tty_buffer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ae3ce330200e..ee3aa57bc0e7 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -26,7 +26,7 @@
* Byte threshold to limit memory consumption for flip buffers.
* The actual memory limit is > 2x this amount.
*/
-#define TTYB_DEFAULT_MEM_LIMIT 65536
+#define TTYB_DEFAULT_MEM_LIMIT (640 * 1024UL)
/*
* We default to dicing tty buffer allocations to this many characters
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 149/187] powerpc/pseries: Perform full re-add of CPU for topology update post-migration
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (147 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 148/187] tty: increase the default flip buffer limit to 2*640K Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 150/187] drm/amd/display: Enable vblank interrupt during CRC capture Greg Kroah-Hartman
` (42 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nathan Fontenot,
Michael W. Bringmann, Michael Ellerman, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 81b61324922c67f73813d8a9c175f3c153f6a1c6 ]
On pseries systems, performing a partition migration can result in
altering the nodes a CPU is assigned to on the destination system. For
exampl, pre-migration on the source system CPUs are in node 1 and 3,
post-migration on the destination system CPUs are in nodes 2 and 3.
Handling the node change for a CPU can cause corruption in the slab
cache if we hit a timing where a CPUs node is changed while cache_reap()
is invoked. The corruption occurs because the slab cache code appears
to rely on the CPU and slab cache pages being on the same node.
The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c
does not prevent us from hitting this scenario.
Changing the device tree property update notification handler that
recognizes an affinity change for a CPU to do a full DLPAR remove and
add of the CPU instead of dynamically changing its node resolves this
issue.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Tested-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/include/asm/topology.h | 2 ++
arch/powerpc/mm/numa.c | 9 +--------
arch/powerpc/platforms/pseries/hotplug-cpu.c | 19 +++++++++++++++++++
3 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index a4a718dbfec6..f85e2b01c3df 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -132,6 +132,8 @@ static inline void shared_proc_topology_init(void) {}
#define topology_sibling_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_core_id(cpu) (cpu_to_core_id(cpu))
+
+int dlpar_cpu_readd(int cpu);
#endif
#endif
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 5500e4edabc6..10fb43efef50 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1461,13 +1461,6 @@ static void reset_topology_timer(void)
#ifdef CONFIG_SMP
-static void stage_topology_update(int core_id)
-{
- cpumask_or(&cpu_associativity_changes_mask,
- &cpu_associativity_changes_mask, cpu_sibling_mask(core_id));
- reset_topology_timer();
-}
-
static int dt_update_callback(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -1480,7 +1473,7 @@ static int dt_update_callback(struct notifier_block *nb,
!of_prop_cmp(update->prop->name, "ibm,associativity")) {
u32 core_id;
of_property_read_u32(update->dn, "reg", &core_id);
- stage_topology_update(core_id);
+ rc = dlpar_cpu_readd(core_id);
rc = NOTIFY_OK;
}
break;
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 6ef77caf7bcf..1d3f9313c02f 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -802,6 +802,25 @@ static int dlpar_cpu_add_by_count(u32 cpus_to_add)
return rc;
}
+int dlpar_cpu_readd(int cpu)
+{
+ struct device_node *dn;
+ struct device *dev;
+ u32 drc_index;
+ int rc;
+
+ dev = get_cpu_device(cpu);
+ dn = dev->of_node;
+
+ rc = of_property_read_u32(dn, "ibm,my-drc-index", &drc_index);
+
+ rc = dlpar_cpu_remove_by_index(drc_index);
+ if (!rc)
+ rc = dlpar_cpu_add(drc_index);
+
+ return rc;
+}
+
int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
{
u32 count, drc_index;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 150/187] drm/amd/display: Enable vblank interrupt during CRC capture
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (148 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 149/187] powerpc/pseries: Perform full re-add of CPU for topology update post-migration Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 151/187] ALSA: dice: add support for Solid State Logic Duende Classic/Mini Greg Kroah-Hartman
` (41 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Kazlauskas, Harry Wentland,
Sun peng Li, Leo Li, Alex Deucher, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 428da2bdb05d76c48d0bd8fbfa2e4c102685be08 ]
[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.
When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.
This issue was found running:
igt@kms_plane_multiple@atomic-pipe-b-tiling-none
The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.
[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 ++++++-
.../drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c | 42 +++++++++----------
2 files changed, 34 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index c57e85f08e23..2b8b892eb846 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4390,10 +4390,22 @@ static int amdgpu_dm_atomic_commit(struct drm_device *dev,
*/
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
struct dm_crtc_state *dm_old_crtc_state = to_dm_crtc_state(old_crtc_state);
+ struct dm_crtc_state *dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc);
- if (drm_atomic_crtc_needs_modeset(new_crtc_state) && dm_old_crtc_state->stream)
+ if (drm_atomic_crtc_needs_modeset(new_crtc_state)
+ && dm_old_crtc_state->stream) {
+ /*
+ * CRC capture was enabled but not disabled.
+ * Release the vblank reference.
+ */
+ if (dm_new_crtc_state->crc_enabled) {
+ drm_crtc_vblank_put(crtc);
+ dm_new_crtc_state->crc_enabled = false;
+ }
+
manage_dm_interrupts(adev, acrtc, false);
+ }
}
/* Add check here for SoC's that support hardware cursor plane, to
* unset legacy_cursor_update */
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c
index 6a6d977ddd7a..36a0bed9af07 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c
@@ -51,6 +51,7 @@ int amdgpu_dm_crtc_set_crc_source(struct drm_crtc *crtc, const char *src_name,
{
struct dm_crtc_state *crtc_state = to_dm_crtc_state(crtc->state);
struct dc_stream_state *stream_state = crtc_state->stream;
+ bool enable;
enum amdgpu_dm_pipe_crc_source source = dm_parse_crc_source(src_name);
@@ -65,28 +66,27 @@ int amdgpu_dm_crtc_set_crc_source(struct drm_crtc *crtc, const char *src_name,
return -EINVAL;
}
+ enable = (source == AMDGPU_DM_PIPE_CRC_SOURCE_AUTO);
+
+ if (!dc_stream_configure_crc(stream_state->ctx->dc, stream_state,
+ enable, enable))
+ return -EINVAL;
+
/* When enabling CRC, we should also disable dithering. */
- if (source == AMDGPU_DM_PIPE_CRC_SOURCE_AUTO) {
- if (dc_stream_configure_crc(stream_state->ctx->dc,
- stream_state,
- true, true)) {
- crtc_state->crc_enabled = true;
- dc_stream_set_dither_option(stream_state,
- DITHER_OPTION_TRUN8);
- }
- else
- return -EINVAL;
- } else {
- if (dc_stream_configure_crc(stream_state->ctx->dc,
- stream_state,
- false, false)) {
- crtc_state->crc_enabled = false;
- dc_stream_set_dither_option(stream_state,
- DITHER_OPTION_DEFAULT);
- }
- else
- return -EINVAL;
- }
+ dc_stream_set_dither_option(stream_state,
+ enable ? DITHER_OPTION_TRUN8
+ : DITHER_OPTION_DEFAULT);
+
+ /*
+ * Reading the CRC requires the vblank interrupt handler to be
+ * enabled. Keep a reference until CRC capture stops.
+ */
+ if (!crtc_state->crc_enabled && enable)
+ drm_crtc_vblank_get(crtc);
+ else if (crtc_state->crc_enabled && !enable)
+ drm_crtc_vblank_put(crtc);
+
+ crtc_state->crc_enabled = enable;
*values_cnt = 3;
/* Reset crc_skipped on dm state */
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 151/187] ALSA: dice: add support for Solid State Logic Duende Classic/Mini
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (149 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 150/187] drm/amd/display: Enable vblank interrupt during CRC capture Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 152/187] usb: dwc3: gadget: Fix OTG events when gadget driver isnt loaded Greg Kroah-Hartman
` (40 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Takashi Sakamoto, Takashi Iwai, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b2e9e1c8810ee05c95f4d55800b8afae70ab01b4 ]
Duende Classic was produced by Solid State Logic in 2006, as a
first model of Duende DSP series. The following model, Duende Mini
was produced in 2008. They are designed to receive isochronous
packets for PCM frames via IEEE 1394 bus, perform signal processing by
downloaded program, then transfer isochronous packets for converted
PCM frames.
These two models includes the same embedded board, consists of several
ICs below:
- Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus
- WaveFront semiconductor, DICE II STD ASIC for link/protocol layer
- Altera MAX 3000A CPLD for programs
- Analog devices, SHARC ADSP-21363 for signal processing (4 chips)
This commit adds support for the two models to ALSA dice driver. Like
support for the other devices, packet streaming is just available.
Userspace applications should be developed if full features became
available; e.g. program uploader and parameter controller.
$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
'bmc': False,
'chip_ID': 349771402425,
'cmc': True,
'cyc_clk_acc': 255,
'generation': 1,
'imc': True,
'isc': True,
'link_spd': 2,
'max_ROM': 1,
'max_rec': 512,
'name': '1394',
'node_vendor_ID': 20674,
'pmc': False},
'root-directory': [ ['VENDOR', 20674],
['DESCRIPTOR', 'Solid State Logic'],
['MODEL', 112],
['DESCRIPTOR', 'Duende board'],
[ 'NODE_CAPABILITIES',
{ 'addressing': {'64': True, 'fix': True, 'prv': True},
'misc': {'int': False, 'ms': False, 'spt': True},
'state': { 'atn': False,
'ded': False,
'drq': True,
'elo': False,
'init': False,
'lst': True,
'off': False},
'testing': {'bas': False, 'ext': False}}],
[ 'UNIT',
[ ['SPECIFIER_ID', 20674],
['VERSION', 1],
['MODEL', 112],
['DESCRIPTOR', 'Duende board']]]]}
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/firewire/dice/dice.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c
index 774eb2205668..3d600f498914 100644
--- a/sound/firewire/dice/dice.c
+++ b/sound/firewire/dice/dice.c
@@ -18,6 +18,7 @@ MODULE_LICENSE("GPL v2");
#define OUI_ALESIS 0x000595
#define OUI_MAUDIO 0x000d6c
#define OUI_MYTEK 0x001ee8
+#define OUI_SSL 0x0050c2 // Actually ID reserved by IEEE.
#define DICE_CATEGORY_ID 0x04
#define WEISS_CATEGORY_ID 0x00
@@ -216,7 +217,7 @@ static int dice_probe(struct fw_unit *unit,
struct snd_dice *dice;
int err;
- if (!entry->driver_data) {
+ if (!entry->driver_data && entry->vendor_id != OUI_SSL) {
err = check_dice_category(unit);
if (err < 0)
return -ENODEV;
@@ -382,6 +383,15 @@ static const struct ieee1394_device_id dice_id_table[] = {
.model_id = 0x000002,
.driver_data = (kernel_ulong_t)snd_dice_detect_mytek_formats,
},
+ // Solid State Logic, Duende Classic and Mini.
+ // NOTE: each field of GUID in config ROM is not compliant to standard
+ // DICE scheme.
+ {
+ .match_flags = IEEE1394_MATCH_VENDOR_ID |
+ IEEE1394_MATCH_MODEL_ID,
+ .vendor_id = OUI_SSL,
+ .model_id = 0x000070,
+ },
{
.match_flags = IEEE1394_MATCH_VERSION,
.version = DICE_INTERFACE,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 152/187] usb: dwc3: gadget: Fix OTG events when gadget driver isnt loaded
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (150 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 151/187] ALSA: dice: add support for Solid State Logic Duende Classic/Mini Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 153/187] platform/x86: intel-hid: Missing power button release on some Dell models Greg Kroah-Hartman
` (39 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Roger Quadros, Sekhar Nori,
Felipe Balbi, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 169e3b68cadb5775daca009ced4faf01ffd97dcf ]
On v3.10a in dual-role mode, if port is in device mode
and gadget driver isn't loaded, the OTG event interrupts don't
come through.
It seems that if the core is configured to be OTG2.0 only,
then we can't leave the DCFG.DEVSPD at Super-speed (default)
if we expect OTG to work properly. It must be set to High-speed.
Fix this issue by configuring DCFG.DEVSPD to the supported
maximum speed at gadget init. Device tree still needs to provide
correct supported maximum speed for this to work.
This issue wasn't present on v2.40a but is seen on v3.10a.
It doesn't cause any side effects on v2.40a.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/dwc3/gadget.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 700fb626ad03..524104eed8a7 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3233,6 +3233,8 @@ int dwc3_gadget_init(struct dwc3 *dwc)
goto err4;
}
+ dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
+
return 0;
err4:
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 153/187] platform/x86: intel-hid: Missing power button release on some Dell models
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (151 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 152/187] usb: dwc3: gadget: Fix OTG events when gadget driver isnt loaded Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 154/187] perf script python: Use PyBytes for attr in trace-event-python Greg Kroah-Hartman
` (38 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tristian Celestin,
Jérôme de Bretagne, Mario Limonciello,
Darren Hart (VMware),
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e97a34563d18606ee5db93e495382a967f999cd4 ]
Power button suspend for some Dell models was added in:
commit 821b85366284 ("platform/x86: intel-hid: Power button suspend on Dell Latitude 7275")
by checking against the power button press notification (0xCE) to report
the power button press event. The corresponding power button release
notification (0xCF) was caught and ignored to stop it from being reported
as an "unknown event" in the logs.
The missing button release event is creating issues on Android-x86, as
reported on the project mailing list for a Dell Latitude 5175 model, since
the events are expected in down/up pairs.
Report the power button release event to fix this issue.
Link: https://groups.google.com/forum/#!topic/android-x86/aSwZK9Nf9Ro
Tested-by: Tristian Celestin <tristian.celestin@outlook.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: corrected commit reference format per checkpatch]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/intel-hid.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index 6cf9b7fa5bf0..3201a83073b5 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@@ -373,7 +373,7 @@ wakeup:
* the 5-button array, but still send notifies with power button
* event code to this device object on power button actions.
*
- * Report the power button press; catch and ignore the button release.
+ * Report the power button press and release.
*/
if (!priv->array) {
if (event == 0xce) {
@@ -382,8 +382,11 @@ wakeup:
return;
}
- if (event == 0xcf)
+ if (event == 0xcf) {
+ input_report_key(priv->input_dev, KEY_POWER, 0);
+ input_sync(priv->input_dev);
return;
+ }
}
/* 0xC0 is for HID events, other values are for 5 button array */
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 154/187] perf script python: Use PyBytes for attr in trace-event-python
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (152 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 153/187] platform/x86: intel-hid: Missing power button release on some Dell models Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 155/187] perf script python: Add trace_context extension module to sys.modules Greg Kroah-Hartman
` (37 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tony Jones, Jiri Olsa,
Arnaldo Carvalho de Melo, Jaroslav Škarvada,
Jonathan Corbet, Ravi Bangoria, Seeteena Thoufeek, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 72e0b15cb24a497d7d0d4707cf51ff40c185ae8c ]
With Python3. PyUnicode_FromStringAndSize is unsafe to call on attr and will
return NULL. Use _PyBytes_FromStringAndSize (as with raw_buf).
Below is the observed behavior without the fix. Note it is first necessary
to apply the prior fix (Add trace_context extension module to sys,modules):
# ldd /usr/bin/perf | grep -i python
libpython3.6m.so.1.0 => /usr/lib64/libpython3.6m.so.1.0 (0x00007f8e1dfb2000)
# perf record -e raw_syscalls:sys_enter /bin/false
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (21 samples) ]
# perf script -g python | cat
generated Python script: perf-script.py
# perf script -s ./perf-script.py
in trace_begin
Segmentation fault (core dumped)
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Fixes: 66dfdff03d19 ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20190124005229.16146-3-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/scripting-engines/trace-event-python.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index 05d95de14e20..fb11396ec861 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -733,8 +733,7 @@ static PyObject *get_perf_sample_dict(struct perf_sample *sample,
Py_FatalError("couldn't create Python dictionary");
pydict_set_item_string_decref(dict, "ev_name", _PyUnicode_FromString(perf_evsel__name(evsel)));
- pydict_set_item_string_decref(dict, "attr", _PyUnicode_FromStringAndSize(
- (const char *)&evsel->attr, sizeof(evsel->attr)));
+ pydict_set_item_string_decref(dict, "attr", _PyBytes_FromStringAndSize((const char *)&evsel->attr, sizeof(evsel->attr)));
pydict_set_item_string_decref(dict_sample, "pid",
_PyLong_FromLong(sample->pid));
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 155/187] perf script python: Add trace_context extension module to sys.modules
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (153 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 154/187] perf script python: Use PyBytes for attr in trace-event-python Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 156/187] media: mt9m111: set initial frame size other than 0x0 Greg Kroah-Hartman
` (36 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tony Jones, Jiri Olsa,
Arnaldo Carvalho de Melo, Jaroslav Škarvada,
Jonathan Corbet, Ravi Bangoria, Seeteena Thoufeek, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cc437642255224e4140fed1f3e3156fc8ad91903 ]
In Python3, the result of PyModule_Create (called from
scripts/python/Perf-Trace-Util/Context.c) is not automatically added to
sys.modules. See: https://bugs.python.org/issue4592
Below is the observed behavior without the fix:
# ldd /usr/bin/perf | grep -i python
libpython3.6m.so.1.0 => /usr/lib64/libpython3.6m.so.1.0 (0x00007f8e1dfb2000)
# perf record /bin/false
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data (17 samples) ]
# perf script -g python | cat
generated Python script: perf-script.py
# perf script -s ./perf-script.py
Traceback (most recent call last):
File "./perf-script.py", line 18, in <module>
from perf_trace_context import *
ModuleNotFoundError: No module named 'perf_trace_context'
Error running python script ./perf-script.py
#
Committer notes:
To build with python3 use:
$ make -C tools/perf PYTHON=python3
Use a non-const variable to pass the 'name' arg to
PyImport_AppendInittab(), as python2.6 has that as 'char *', which ends
up trowing this in some environments:
CC /tmp/build/perf/util/parse-branch-options.o
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1520:2: error: passing argument 1 of 'PyImport_AppendInittab' discards 'const' qualifier from pointer target type [-Werror]
PyImport_AppendInittab("perf_trace_context", initfunc);
^
In file included from /usr/include/python2.6/Python.h:130:0,
from util/scripting-engines/trace-event-python.c:22:
/usr/include/python2.6/import.h:54:17: note: expected 'char *' but argument is of type 'const char *'
PyAPI_FUNC(int) PyImport_AppendInittab(char *name, void (*initfunc)(void));
^
cc1: all warnings being treated as errors
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Fixes: 66dfdff03d19 ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20190124005229.16146-2-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../perf/util/scripting-engines/trace-event-python.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index fb11396ec861..9569cc06e0a7 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -1493,34 +1493,40 @@ static void _free_command_line(wchar_t **command_line, int num)
static int python_start_script(const char *script, int argc, const char **argv)
{
struct tables *tables = &tables_global;
+ PyMODINIT_FUNC (*initfunc)(void);
#if PY_MAJOR_VERSION < 3
const char **command_line;
#else
wchar_t **command_line;
#endif
- char buf[PATH_MAX];
+ /*
+ * Use a non-const name variable to cope with python 2.6's
+ * PyImport_AppendInittab prototype
+ */
+ char buf[PATH_MAX], name[19] = "perf_trace_context";
int i, err = 0;
FILE *fp;
#if PY_MAJOR_VERSION < 3
+ initfunc = initperf_trace_context;
command_line = malloc((argc + 1) * sizeof(const char *));
command_line[0] = script;
for (i = 1; i < argc + 1; i++)
command_line[i] = argv[i - 1];
#else
+ initfunc = PyInit_perf_trace_context;
command_line = malloc((argc + 1) * sizeof(wchar_t *));
command_line[0] = Py_DecodeLocale(script, NULL);
for (i = 1; i < argc + 1; i++)
command_line[i] = Py_DecodeLocale(argv[i - 1], NULL);
#endif
+ PyImport_AppendInittab(name, initfunc);
Py_Initialize();
#if PY_MAJOR_VERSION < 3
- initperf_trace_context();
PySys_SetArgv(argc + 1, (char **)command_line);
#else
- PyInit_perf_trace_context();
PySys_SetArgv(argc + 1, command_line);
#endif
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 156/187] media: mt9m111: set initial frame size other than 0x0
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (154 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 155/187] perf script python: Add trace_context extension module to sys.modules Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 157/187] hwrng: virtio - Avoid repeated init of completion Greg Kroah-Hartman
` (35 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Enrico Scholz, Michael Grzeschik,
Marco Felsch, Akinobu Mita, Sakari Ailus, Mauro Carvalho Chehab,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ]
This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.
This is detected by v4l2-compliance detected.
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/i2c/mt9m111.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index efda1aa95ca0..7a7d3969af20 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -1014,6 +1014,8 @@ static int mt9m111_probe(struct i2c_client *client,
mt9m111->rect.top = MT9M111_MIN_DARK_ROWS;
mt9m111->rect.width = MT9M111_MAX_WIDTH;
mt9m111->rect.height = MT9M111_MAX_HEIGHT;
+ mt9m111->width = mt9m111->rect.width;
+ mt9m111->height = mt9m111->rect.height;
mt9m111->fmt = &mt9m111_colour_fmts[0];
mt9m111->lastpage = -1;
mutex_init(&mt9m111->power_lock);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 157/187] hwrng: virtio - Avoid repeated init of completion
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (155 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 156/187] media: mt9m111: set initial frame size other than 0x0 Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 158/187] soc/tegra: fuse: Fix illegal free of IO base address Greg Kroah-Hartman
` (34 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Tolnay, Herbert Xu, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit aef027db48da56b6f25d0e54c07c8401ada6ce21 ]
The virtio-rng driver uses a completion called have_data to wait for a
virtio read to be fulfilled by the hypervisor. The completion is reset
before placing a buffer on the virtio queue and completed by the virtio
callback once data has been written into the buffer.
Prior to this commit, the driver called init_completion on this
completion both during probe as well as when registering virtio buffers
as part of a hwrng read operation. The second of these init_completion
calls should instead be reinit_completion because the have_data
completion has already been inited by probe. As described in
Documentation/scheduler/completion.txt, "Calling init_completion() twice
on the same completion object is most likely a bug".
This bug was present in the initial implementation of virtio-rng in
f7f510ec1957 ("virtio: An entropy device, as suggested by hpa"). Back
then the have_data completion was a single static completion rather than
a member of one of potentially multiple virtrng_info structs as
implemented later by 08e53fbdb85c ("virtio-rng: support multiple
virtio-rng devices"). The original driver incorrectly used
init_completion rather than INIT_COMPLETION to reset have_data during
read.
Tested by running `head -c48 /dev/random | hexdump` within crosvm, the
Chrome OS virtual machine monitor, and confirming that the virtio-rng
driver successfully produces random bytes from the host.
Signed-off-by: David Tolnay <dtolnay@gmail.com>
Tested-by: David Tolnay <dtolnay@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/hw_random/virtio-rng.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index b89df66ea1ae..7abd604e938c 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -73,7 +73,7 @@ static int virtio_read(struct hwrng *rng, void *buf, size_t size, bool wait)
if (!vi->busy) {
vi->busy = true;
- init_completion(&vi->have_data);
+ reinit_completion(&vi->have_data);
register_buffer(vi, buf, size);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 158/187] soc/tegra: fuse: Fix illegal free of IO base address
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (156 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 157/187] hwrng: virtio - Avoid repeated init of completion Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 159/187] HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit Greg Kroah-Hartman
` (33 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Timo Alho, Jon Hunter,
Thierry Reding, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 51294bf6b9e897d595466dcda5a3f2751906a200 ]
On cases where device tree entries for fuse and clock provider are in
different order, fuse driver needs to defer probing. This leads to
freeing incorrect IO base address as the fuse->base variable gets
overwritten once during first probe invocation. This leads to the
following spew during boot:
[ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94)
[ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8
[ 3.082318] Modules linked in:
[ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1
[ 3.082340] Hardware name: quill (DT)
[ 3.082353] Workqueue: events deferred_probe_work_func
[ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 3.082372] pc : __vunmap+0xcc/0xd8
[ 3.082379] lr : __vunmap+0xcc/0xd8
[ 3.082385] sp : ffff00000a1d3b60
[ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000
[ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610
[ 3.082413] x25: 0000000000000000 x24: 0000000000000009
[ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000
[ 3.082432] x21: 0000000000000000 x20: 0000000000000000
[ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff
[ 3.082452] x17: 0000000000000000 x16: 0000000000000000
[ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720
[ 3.082471] x13: 0720072007200720 x12: 0720072907340739
[ 3.082481] x11: 0764076607380765 x10: 0766076307300730
[ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720
[ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102
[ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000
[ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8
[ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000
[ 3.082538] Call trace:
[ 3.082545] __vunmap+0xcc/0xd8
[ 3.082552] vunmap+0x24/0x30
[ 3.082561] __iounmap+0x2c/0x38
[ 3.082569] tegra_fuse_probe+0xc8/0x118
[ 3.082577] platform_drv_probe+0x50/0xa0
[ 3.082585] really_probe+0x1b0/0x288
[ 3.082593] driver_probe_device+0x58/0x100
[ 3.082601] __device_attach_driver+0x98/0xf0
[ 3.082609] bus_for_each_drv+0x64/0xc8
[ 3.082616] __device_attach+0xd8/0x130
[ 3.082624] device_initial_probe+0x10/0x18
[ 3.082631] bus_probe_device+0x90/0x98
[ 3.082638] deferred_probe_work_func+0x74/0xb0
[ 3.082649] process_one_work+0x1e0/0x318
[ 3.082656] worker_thread+0x228/0x450
[ 3.082664] kthread+0x128/0x130
[ 3.082672] ret_from_fork+0x10/0x18
[ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]---
Fix this by retaining the value of fuse->base until driver has
successfully probed.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/tegra/fuse/fuse-tegra.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index a33ee8ef8b6b..51625703399e 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -137,13 +137,17 @@ static int tegra_fuse_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
fuse->phys = res->start;
fuse->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(fuse->base))
- return PTR_ERR(fuse->base);
+ if (IS_ERR(fuse->base)) {
+ err = PTR_ERR(fuse->base);
+ fuse->base = base;
+ return err;
+ }
fuse->clk = devm_clk_get(&pdev->dev, "fuse");
if (IS_ERR(fuse->clk)) {
dev_err(&pdev->dev, "failed to get FUSE clock: %ld",
PTR_ERR(fuse->clk));
+ fuse->base = base;
return PTR_ERR(fuse->clk);
}
@@ -152,8 +156,10 @@ static int tegra_fuse_probe(struct platform_device *pdev)
if (fuse->soc->probe) {
err = fuse->soc->probe(fuse);
- if (err < 0)
+ if (err < 0) {
+ fuse->base = base;
return err;
+ }
}
if (tegra_fuse_create_sysfs(&pdev->dev, fuse->soc->info->size,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 159/187] HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (157 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 158/187] soc/tegra: fuse: Fix illegal free of IO base address Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 160/187] f2fs: UBSAN: set boolean value iostat_enable correctly Greg Kroah-Hartman
` (32 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Song Hongyan, Srinivas Pandruvada,
Jiri Kosina, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2edefc056e4f0e6ec9508dd1aca2c18fa320efef ]
Host driver should handle interrupt mask register earlier than wake up ish FW
else there will be conditions when FW interrupt comes, host PIMR register still
not set ready, so move the interrupt mask setting before ish_wakeup.
Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be
conditions host driver received a busy_clear interrupt (before the busy_clear
mask bit is ready), it will return IRQ_NONE after check_generated_interrupt,
the interrupt will never be cleared, causing the DEVICE not sending following
IRQ.
Since PISR clear should not be called for the CHV device we do this change.
After the change, both ISH2HOST interrupt and busy_clear interrupt will be
considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED
from IPC_IS_BUSY check.
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/intel-ish-hid/ipc/ipc.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index bfbca7ec54ce..e00b9dbe220f 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -91,7 +91,10 @@ static bool check_generated_interrupt(struct ishtp_device *dev)
IPC_INT_FROM_ISH_TO_HOST_CHV_AB(pisr_val);
} else {
pisr_val = ish_reg_read(dev, IPC_REG_PISR_BXT);
- interrupt_generated = IPC_INT_FROM_ISH_TO_HOST_BXT(pisr_val);
+ interrupt_generated = !!pisr_val;
+ /* only busy-clear bit is RW, others are RO */
+ if (pisr_val)
+ ish_reg_write(dev, IPC_REG_PISR_BXT, pisr_val);
}
return interrupt_generated;
@@ -843,11 +846,11 @@ int ish_hw_start(struct ishtp_device *dev)
{
ish_set_host_rdy(dev);
+ set_host_ready(dev);
+
/* After that we can enable ISH DMA operation and wakeup ISHFW */
ish_wakeup(dev);
- set_host_ready(dev);
-
/* wait for FW-initiated reset flow */
if (!dev->recvd_hw_ready)
wait_event_interruptible_timeout(dev->wait_hw_ready,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 160/187] f2fs: UBSAN: set boolean value iostat_enable correctly
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (158 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 159/187] HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 161/187] hpet: Fix missing = character in the __setup() code of hpet_mmap_enable Greg Kroah-Hartman
` (31 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sheng Yong, Chao Yu, Jaegeuk Kim,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ac92985864e187a1735502f6a02f54eaa655b2aa ]
When setting /sys/fs/f2fs/<DEV>/iostat_enable with non-bool value, UBSAN
reports the following warning.
[ 7562.295484] ================================================================================
[ 7562.296531] UBSAN: Undefined behaviour in fs/f2fs/f2fs.h:2776:10
[ 7562.297651] load of value 64 is not a valid value for type '_Bool'
[ 7562.298642] CPU: 1 PID: 7487 Comm: dd Not tainted 4.20.0-rc4+ #79
[ 7562.298653] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 7562.298662] Call Trace:
[ 7562.298760] dump_stack+0x46/0x5b
[ 7562.298811] ubsan_epilogue+0x9/0x40
[ 7562.298830] __ubsan_handle_load_invalid_value+0x72/0x90
[ 7562.298863] f2fs_file_write_iter+0x29f/0x3f0
[ 7562.298905] __vfs_write+0x115/0x160
[ 7562.298922] vfs_write+0xa7/0x190
[ 7562.298934] ksys_write+0x50/0xc0
[ 7562.298973] do_syscall_64+0x4a/0xe0
[ 7562.298992] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 7562.299001] RIP: 0033:0x7fa45ec19c00
[ 7562.299004] Code: 73 01 c3 48 8b 0d 88 92 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d dd eb 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ce 8f 01 00 48 89 04 24
[ 7562.299044] RSP: 002b:00007ffca52b49e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 7562.299052] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa45ec19c00
[ 7562.299059] RDX: 0000000000000400 RSI: 000000000093f000 RDI: 0000000000000001
[ 7562.299065] RBP: 000000000093f000 R08: 0000000000000004 R09: 0000000000000000
[ 7562.299071] R10: 00007ffca52b47b0 R11: 0000000000000246 R12: 0000000000000400
[ 7562.299077] R13: 000000000093f000 R14: 000000000093f400 R15: 0000000000000000
[ 7562.299091] ================================================================================
So, if iostat_enable is enabled, set its value as true.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/f2fs/sysfs.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index 81c0e5337443..98887187af4c 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -273,10 +273,16 @@ out:
return count;
}
- *ui = t;
- if (!strcmp(a->attr.name, "iostat_enable") && *ui == 0)
- f2fs_reset_iostat(sbi);
+ if (!strcmp(a->attr.name, "iostat_enable")) {
+ sbi->iostat_enable = !!t;
+ if (!sbi->iostat_enable)
+ f2fs_reset_iostat(sbi);
+ return count;
+ }
+
+ *ui = (unsigned int)t;
+
return count;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 161/187] hpet: Fix missing = character in the __setup() code of hpet_mmap_enable
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (159 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 160/187] f2fs: UBSAN: set boolean value iostat_enable correctly Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 162/187] cpu/hotplug: Mute hotplug lockdep during init Greg Kroah-Hartman
` (30 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Buland Singh, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 24d48a61f2666630da130cc2ec2e526eacf229e3 ]
Commit '3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.
Before this patch:
dmesg output with the kernel command line parameter hpet_mmap=1
[ 0.204152] HPET mmap disabled
dmesg output with the kernel command line parameter hpet_mmap=0
[ 0.204192] HPET mmap disabled
After this patch:
dmesg output with the kernel command line parameter hpet_mmap=1
[ 0.203945] HPET mmap enabled
dmesg output with the kernel command line parameter hpet_mmap=0
[ 0.204652] HPET mmap disabled
Fixes: 3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: Buland Singh <bsingh@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/hpet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 4a22b4b41aef..9bffcd37cc7b 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -377,7 +377,7 @@ static __init int hpet_mmap_enable(char *str)
pr_info("HPET mmap %s\n", hpet_mmap_enabled ? "enabled" : "disabled");
return 1;
}
-__setup("hpet_mmap", hpet_mmap_enable);
+__setup("hpet_mmap=", hpet_mmap_enable);
static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
{
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 162/187] cpu/hotplug: Mute hotplug lockdep during init
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (160 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 161/187] hpet: Fix missing = character in the __setup() code of hpet_mmap_enable Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 163/187] dmaengine: imx-dma: fix warning comparison of distinct pointer types Greg Kroah-Hartman
` (29 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Zijlstra, Valentin Schneider,
Andrew Morton, Linus Torvalds, Paul E. McKenney, Thomas Gleixner,
Will Deacon, cai, daniel.lezcano, dietmar.eggemann,
linux-arm-kernel, longman, marc.zyngier, mark.rutland,
Ingo Molnar, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ce48c457b95316b9a01b5aa9d4456ce820df94b4 ]
Since we've had:
commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations")
we've been getting some lockdep warnings during init, such as on HiKey960:
[ 0.820495] WARNING: CPU: 4 PID: 0 at kernel/cpu.c:316 lockdep_assert_cpus_held+0x3c/0x48
[ 0.820498] Modules linked in:
[ 0.820509] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G S 4.20.0-rc5-00051-g4cae42a #34
[ 0.820511] Hardware name: HiKey960 (DT)
[ 0.820516] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[ 0.820520] pc : lockdep_assert_cpus_held+0x3c/0x48
[ 0.820523] lr : lockdep_assert_cpus_held+0x38/0x48
[ 0.820526] sp : ffff00000a9cbe50
[ 0.820528] x29: ffff00000a9cbe50 x28: 0000000000000000
[ 0.820533] x27: 00008000b69e5000 x26: ffff8000bff4cfe0
[ 0.820537] x25: ffff000008ba69e0 x24: 0000000000000001
[ 0.820541] x23: ffff000008fce000 x22: ffff000008ba70c8
[ 0.820545] x21: 0000000000000001 x20: 0000000000000003
[ 0.820548] x19: ffff00000a35d628 x18: ffffffffffffffff
[ 0.820552] x17: 0000000000000000 x16: 0000000000000000
[ 0.820556] x15: ffff00000958f848 x14: 455f3052464d4d34
[ 0.820559] x13: 00000000769dde98 x12: ffff8000bf3f65a8
[ 0.820564] x11: 0000000000000000 x10: ffff00000958f848
[ 0.820567] x9 : ffff000009592000 x8 : ffff00000958f848
[ 0.820571] x7 : ffff00000818ffa0 x6 : 0000000000000000
[ 0.820574] x5 : 0000000000000000 x4 : 0000000000000001
[ 0.820578] x3 : 0000000000000000 x2 : 0000000000000001
[ 0.820582] x1 : 00000000ffffffff x0 : 0000000000000000
[ 0.820587] Call trace:
[ 0.820591] lockdep_assert_cpus_held+0x3c/0x48
[ 0.820598] static_key_enable_cpuslocked+0x28/0xd0
[ 0.820606] arch_timer_check_ool_workaround+0xe8/0x228
[ 0.820610] arch_timer_starting_cpu+0xe4/0x2d8
[ 0.820615] cpuhp_invoke_callback+0xe8/0xd08
[ 0.820619] notify_cpu_starting+0x80/0xb8
[ 0.820625] secondary_start_kernel+0x118/0x1d0
We've also had a similar warning in sched_init_smp() for every
asymmetric system that would enable the sched_asym_cpucapacity static
key, although that was singled out in:
commit 40fa3780bac2 ("sched/core: Take the hotplug lock in sched_init_smp()")
Those warnings are actually harmless, since we cannot have hotplug
operations at the time they appear. Instead of starting to sprinkle
useless hotplug lock operations in the init codepaths, mute the
warnings until they start warning about real problems.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: cai@gmx.us
Cc: daniel.lezcano@linaro.org
Cc: dietmar.eggemann@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: longman@redhat.com
Cc: marc.zyngier@arm.com
Cc: mark.rutland@arm.com
Link: https://lkml.kernel.org/r/1545243796-23224-2-git-send-email-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/cpu.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 9d0ecc4a0e79..dc250ec2c096 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -313,6 +313,15 @@ void cpus_write_unlock(void)
void lockdep_assert_cpus_held(void)
{
+ /*
+ * We can't have hotplug operations before userspace starts running,
+ * and some init codepaths will knowingly not take the hotplug lock.
+ * This is all valid, so mute lockdep until it makes sense to report
+ * unheld locks.
+ */
+ if (system_state < SYSTEM_RUNNING)
+ return;
+
percpu_rwsem_assert_held(&cpu_hotplug_lock);
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 163/187] dmaengine: imx-dma: fix warning comparison of distinct pointer types
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (161 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 162/187] cpu/hotplug: Mute hotplug lockdep during init Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 164/187] dmaengine: qcom_hidma: assign channel cookie correctly Greg Kroah-Hartman
` (28 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Anders Roxell, Olof Johansson,
Fabio Estevam, Vinod Koul, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9227ab5643cb8350449502dd9e3168a873ab0e3b ]
The warning got introduced by commit 930507c18304 ("arm64: add basic
Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning
haven't been seen before since size_t was 'unsigned int' when built on
arm32.
../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’:
../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^~
../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~
../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
#define min(x, y) __careful_cmp(x, y, <)
^~~~~~~~~~~~~
../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’
now = min(d->len, sg_dma_len(sg));
^~~
Rework so that we use min_t and pass in the size_t that returns the
minimum of two values, using the specified type.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/imx-dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index 118d371a2a4a..dfee0d895ce3 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -284,7 +284,7 @@ static inline int imxdma_sg_next(struct imxdma_desc *d)
struct scatterlist *sg = d->sg;
unsigned long now;
- now = min(d->len, sg_dma_len(sg));
+ now = min_t(size_t, d->len, sg_dma_len(sg));
if (d->len != IMX_DMA_LENGTH_LOOP)
d->len -= now;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 164/187] dmaengine: qcom_hidma: assign channel cookie correctly
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (162 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 163/187] dmaengine: imx-dma: fix warning comparison of distinct pointer types Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 165/187] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_* Greg Kroah-Hartman
` (27 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joey Zheng, Sinan Kaya,
Shunyong Yang, Vinod Koul, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 546c0547555efca8ba8c120716c325435e29df1b ]
When dma_cookie_complete() is called in hidma_process_completed(),
dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then,
hidma_txn_is_success() will be called to use channel cookie
mchan->last_success to do additional DMA status check. Current code
assigns mchan->last_success after dma_cookie_complete(). This causes
a race condition of dma_cookie_status() returns DMA_COMPLETE before
mchan->last_success is assigned correctly. The race will cause
hidma_tx_status() return DMA_ERROR but the transaction is actually a
success. Moreover, in async_tx case, it will cause a timeout panic
in async_tx_quiesce().
Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for
transaction
...
Call trace:
[<ffff000008089994>] dump_backtrace+0x0/0x1f4
[<ffff000008089bac>] show_stack+0x24/0x2c
[<ffff00000891e198>] dump_stack+0x84/0xa8
[<ffff0000080da544>] panic+0x12c/0x29c
[<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx]
[<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx]
[<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456]
[<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456]
[<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456]
[<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456]
[<ffff000008736538>] md_thread+0x108/0x168
[<ffff0000080fb1cc>] kthread+0x10c/0x138
[<ffff000008084d34>] ret_from_fork+0x10/0x18
Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/qcom/hidma.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 43d4b00b8138..ea219bca116d 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -138,24 +138,25 @@ static void hidma_process_completed(struct hidma_chan *mchan)
desc = &mdesc->desc;
last_cookie = desc->cookie;
+ llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
+
spin_lock_irqsave(&mchan->lock, irqflags);
+ if (llstat == DMA_COMPLETE) {
+ mchan->last_success = last_cookie;
+ result.result = DMA_TRANS_NOERROR;
+ } else {
+ result.result = DMA_TRANS_ABORTED;
+ }
+
dma_cookie_complete(desc);
spin_unlock_irqrestore(&mchan->lock, irqflags);
- llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
dmaengine_desc_get_callback(desc, &cb);
dma_run_dependencies(desc);
spin_lock_irqsave(&mchan->lock, irqflags);
list_move(&mdesc->node, &mchan->free);
-
- if (llstat == DMA_COMPLETE) {
- mchan->last_success = last_cookie;
- result.result = DMA_TRANS_NOERROR;
- } else
- result.result = DMA_TRANS_ABORTED;
-
spin_unlock_irqrestore(&mchan->lock, irqflags);
dmaengine_desc_callback_invoke(&cb, &result);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 165/187] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_*
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (163 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 164/187] dmaengine: qcom_hidma: assign channel cookie correctly Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 166/187] netfilter: physdev: relax br_netfilter dependency Greg Kroah-Hartman
` (26 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joey Zheng, Sinan Kaya,
Shunyong Yang, Vinod Koul, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 875aac8a46424e5b73a9ff7f40b83311b609e407 ]
In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor
to check the ACK status. As hidma reuses the descriptor in a free list
when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed
if the descriptor has been used before. This will cause a BUG_ON in
async_tx_quiesce().
kernel BUG at crypto/async_tx/async_tx.c:282!
Internal error: Oops - BUG: 0 1 SMP
...
task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000
PC is at async_tx_quiesce+0x54/0x78 [async_tx]
LR is at async_trigger_callback+0x98/0x110 [async_tx]
This patch initializes flags in dma_async_tx_descriptor by the flags
passed from the caller when hidma_prep_dma_*(memcpy/memset) is called.
Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/qcom/hidma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index ea219bca116d..411f91fde734 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -416,6 +416,7 @@ hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dest, dma_addr_t src,
if (!mdesc)
return NULL;
+ mdesc->desc.flags = flags;
hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
src, dest, len, flags,
HIDMA_TRE_MEMCPY);
@@ -448,6 +449,7 @@ hidma_prep_dma_memset(struct dma_chan *dmach, dma_addr_t dest, int value,
if (!mdesc)
return NULL;
+ mdesc->desc.flags = flags;
hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
value, dest, len, flags,
HIDMA_TRE_MEMSET);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 166/187] netfilter: physdev: relax br_netfilter dependency
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (164 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 165/187] dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_* Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 167/187] media: rcar-vin: Allow independent VIN link enablement Greg Kroah-Hartman
` (25 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Westphal, Pablo Neira Ayuso,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8e2f311a68494a6677c1724bdcb10bada21af37c ]
Following command:
iptables -D FORWARD -m physdev ...
causes connectivity loss in some setups.
Reason is that iptables userspace will probe kernel for the module revision
of the physdev patch, and physdev has an artificial dependency on
br_netfilter (xt_physdev use makes no sense unless a br_netfilter module
is loaded).
This causes the "phydev" module to be loaded, which in turn enables the
"call-iptables" infrastructure.
bridged packets might then get dropped by the iptables ruleset.
The better fix would be to change the "call-iptables" defaults to 0 and
enforce explicit setting to 1, but that breaks backwards compatibility.
This does the next best thing: add a request_module call to checkentry.
This was a stray '-D ... -m physdev' won't activate br_netfilter
anymore.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/netfilter/br_netfilter.h | 1 -
net/bridge/br_netfilter_hooks.c | 5 -----
net/netfilter/xt_physdev.c | 9 +++++++--
3 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/include/net/netfilter/br_netfilter.h b/include/net/netfilter/br_netfilter.h
index 74af19c3a8f7..a4ba601b5d04 100644
--- a/include/net/netfilter/br_netfilter.h
+++ b/include/net/netfilter/br_netfilter.h
@@ -49,7 +49,6 @@ static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
}
struct net_device *setup_pre_routing(struct sk_buff *skb);
-void br_netfilter_enable(void);
#if IS_ENABLED(CONFIG_IPV6)
int br_validate_ipv6(struct net *net, struct sk_buff *skb);
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index e07a7e62c705..3b0a03b92080 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -884,11 +884,6 @@ static const struct nf_br_ops br_ops = {
.br_dev_xmit_hook = br_nf_dev_xmit,
};
-void br_netfilter_enable(void)
-{
-}
-EXPORT_SYMBOL_GPL(br_netfilter_enable);
-
/* For br_nf_post_routing, we need (prio = NF_BR_PRI_LAST), because
* br_dev_queue_push_xmit is called afterwards */
static const struct nf_hook_ops br_nf_ops[] = {
diff --git a/net/netfilter/xt_physdev.c b/net/netfilter/xt_physdev.c
index 9d6d67b953ac..05f00fb20b04 100644
--- a/net/netfilter/xt_physdev.c
+++ b/net/netfilter/xt_physdev.c
@@ -96,8 +96,7 @@ match_outdev:
static int physdev_mt_check(const struct xt_mtchk_param *par)
{
const struct xt_physdev_info *info = par->matchinfo;
-
- br_netfilter_enable();
+ static bool brnf_probed __read_mostly;
if (!(info->bitmask & XT_PHYSDEV_OP_MASK) ||
info->bitmask & ~XT_PHYSDEV_OP_MASK)
@@ -111,6 +110,12 @@ static int physdev_mt_check(const struct xt_mtchk_param *par)
if (par->hook_mask & (1 << NF_INET_LOCAL_OUT))
return -EINVAL;
}
+
+ if (!brnf_probed) {
+ brnf_probed = true;
+ request_module("br_netfilter");
+ }
+
return 0;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 167/187] media: rcar-vin: Allow independent VIN link enablement
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (165 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 166/187] netfilter: physdev: relax br_netfilter dependency Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 168/187] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration Greg Kroah-Hartman
` (24 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Steve Longerbeam,
Niklas Söderlund, Hans Verkuil, Mauro Carvalho Chehab,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c5ff0edb8e2270a75935c73217fb0de1abd2d910 ]
There is a block of code in rvin_group_link_notify() that prevents
enabling a link to a VIN node if any entity in the media graph is
in use. This prevents enabling a VIN link even if there is an in-use
entity somewhere in the graph that is independent of the link's
pipeline.
For example, the code block will prevent enabling a link from
the first rcar-csi2 receiver to a VIN node even if there is an
enabled link somewhere far upstream on the second independent
rcar-csi2 receiver pipeline.
If this code block is meant to prevent modifying a link if any entity
in the graph is actively involved in streaming (because modifying
the CHSEL register fields can disrupt any/all running streams), then
the entities stream counts should be checked rather than the use counts.
(There is already such a check in __media_entity_setup_link() that verifies
the stream_count of the link's source and sink entities are both zero,
but that is insufficient, since there should be no running streams in
the entire graph).
Modify the code block to check the entity stream_count instead of the
use_count (and elaborate on the comment). VIN node links can now be
enabled even if there are other independent in-use entities that are
not streaming.
Fixes: c0cc5aef31 ("media: rcar-vin: add link notify for Gen3")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/rcar-vin/rcar-core.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index ce09799976ef..e1085e3ab3cc 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -131,9 +131,13 @@ static int rvin_group_link_notify(struct media_link *link, u32 flags,
!is_media_entity_v4l2_video_device(link->sink->entity))
return 0;
- /* If any entity is in use don't allow link changes. */
+ /*
+ * Don't allow link changes if any entity in the graph is
+ * streaming, modifying the CHSEL register fields can disrupt
+ * running streams.
+ */
media_device_for_each_entity(entity, &group->mdev)
- if (entity->use_count)
+ if (entity->stream_count)
return -EBUSY;
mutex_lock(&group->lock);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 168/187] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (166 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 167/187] media: rcar-vin: Allow independent VIN link enablement Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 169/187] regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting Greg Kroah-Hartman
` (23 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pawe? Chmiel, Jacek Anaszewski,
Mauro Carvalho Chehab, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]
Previously when doing format enumeration, it was returning all
formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
supported by hw will be returned. Similar thing is already done
in s5p_jpeg_find_format.
It was found by using v4l2-compliance tool and checking result
of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.
Tested on s5pv210-galaxys (Samsung i9000 phone).
Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/s5p-jpeg/jpeg-core.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 29daecf8de7d..350afaa29a62 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -1293,13 +1293,16 @@ static int s5p_jpeg_querycap(struct file *file, void *priv,
return 0;
}
-static int enum_fmt(struct s5p_jpeg_fmt *sjpeg_formats, int n,
+static int enum_fmt(struct s5p_jpeg_ctx *ctx,
+ struct s5p_jpeg_fmt *sjpeg_formats, int n,
struct v4l2_fmtdesc *f, u32 type)
{
int i, num = 0;
+ unsigned int fmt_ver_flag = ctx->jpeg->variant->fmt_ver_flag;
for (i = 0; i < n; ++i) {
- if (sjpeg_formats[i].flags & type) {
+ if (sjpeg_formats[i].flags & type &&
+ sjpeg_formats[i].flags & fmt_ver_flag) {
/* index-th format of type type found ? */
if (num == f->index)
break;
@@ -1326,11 +1329,11 @@ static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
if (ctx->mode == S5P_JPEG_ENCODE)
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
SJPEG_FMT_FLAG_ENC_CAPTURE);
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
- SJPEG_FMT_FLAG_DEC_CAPTURE);
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ SJPEG_FMT_FLAG_DEC_CAPTURE);
}
static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
@@ -1339,11 +1342,11 @@ static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);
if (ctx->mode == S5P_JPEG_ENCODE)
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
SJPEG_FMT_FLAG_ENC_OUTPUT);
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
- SJPEG_FMT_FLAG_DEC_OUTPUT);
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ SJPEG_FMT_FLAG_DEC_OUTPUT);
}
static struct s5p_jpeg_q_data *get_q_data(struct s5p_jpeg_ctx *ctx,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 169/187] regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (167 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 168/187] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 170/187] pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins Greg Kroah-Hartman
` (22 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Axel Lin, Mark Brown, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ]
The act8600_sudcdc_voltage_ranges setting does not match the datasheet.
The problems in below entry:
REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
1. The off-by-one min_sel causes wrong volatage calculation.
The min_sel should be 192.
2. According to the datasheet[1] Table 7. (on page 43):
The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V.
Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM.
[1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf
Fixes: df3a950e4e73 ("regulator: act8865: Add act8600 support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/act8865-regulator.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 21e20483bd91..e0239cf3f56d 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -131,7 +131,7 @@
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
-#define ACT8600_SUDCDC_VOLTAGE_NUM 255
+#define ACT8600_SUDCDC_VOLTAGE_NUM 256
struct act8865 {
struct regmap *regmap;
@@ -222,7 +222,8 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
- REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
+ REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000),
+ REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};
static struct regulator_ops act8865_ops = {
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 170/187] pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (168 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 169/187] regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 171/187] drm: Auto-set allow_fb_modifiers when given modifiers at plane init Greg Kroah-Hartman
` (21 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jianxin Pan, Martin Blumenstingl,
Kevin Hilman, Emiliano Ingrassia, Linus Walleij, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6daae00243e622dd3feec7965bfe421ad6dd317e ]
Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines.
Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to
rely on the bootloader to set them up correctly.
The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit 0: eth_rxd1 (DIF_0_P)
- register 6 bit 1: eth_rxd0 (DIF_0_N)
- register 6 bit 2: eth_rx_dv (DIF_1_P)
- register 6 bit 3: eth_rx_clk (DIF_1_N)
- register 6 bit 6: eth_tx_en (DIF_3_P)
- register 6 bit 8: eth_ref_clk (DIF_3_N)
- register 6 bit 9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)
All functions except eth_rxd2 and eth_rxd3 are already supported by the
pinctrl-meson8b driver.
Suggested-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Reviewed-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/meson/pinctrl-meson8b.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index ead4beb5f55f..036124fd363c 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -346,6 +346,8 @@ static const unsigned int eth_rx_dv_pins[] = { DIF_1_P };
static const unsigned int eth_rx_clk_pins[] = { DIF_1_N };
static const unsigned int eth_txd0_1_pins[] = { DIF_2_P };
static const unsigned int eth_txd1_1_pins[] = { DIF_2_N };
+static const unsigned int eth_rxd3_pins[] = { DIF_2_P };
+static const unsigned int eth_rxd2_pins[] = { DIF_2_N };
static const unsigned int eth_tx_en_pins[] = { DIF_3_P };
static const unsigned int eth_ref_clk_pins[] = { DIF_3_N };
static const unsigned int eth_mdc_pins[] = { DIF_4_P };
@@ -571,6 +573,8 @@ static struct meson_pmx_group meson8b_cbus_groups[] = {
GROUP(eth_ref_clk, 6, 8),
GROUP(eth_mdc, 6, 9),
GROUP(eth_mdio_en, 6, 10),
+ GROUP(eth_rxd3, 7, 22),
+ GROUP(eth_rxd2, 7, 23),
};
static struct meson_pmx_group meson8b_aobus_groups[] = {
@@ -720,7 +724,7 @@ static const char * const ethernet_groups[] = {
"eth_tx_clk", "eth_tx_en", "eth_txd1_0", "eth_txd1_1",
"eth_txd0_0", "eth_txd0_1", "eth_rx_clk", "eth_rx_dv",
"eth_rxd1", "eth_rxd0", "eth_mdio_en", "eth_mdc", "eth_ref_clk",
- "eth_txd2", "eth_txd3"
+ "eth_txd2", "eth_txd3", "eth_rxd3", "eth_rxd2"
};
static const char * const i2c_a_groups[] = {
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 171/187] drm: Auto-set allow_fb_modifiers when given modifiers at plane init
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (169 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 170/187] pinctrl: meson: meson8b: add the eth_rxd2 and eth_rxd3 pins Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 172/187] drm/nouveau: Stop using drm_crtc_force_disable Greg Kroah-Hartman
` (20 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Vetter, Paul Kocialkowski,
Maxime Ripard, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 890880ddfdbe256083170866e49c87618b706ac7 ]
When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.
In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.
In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_plane.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
index 6153cbda239f..d36b1be632d9 100644
--- a/drivers/gpu/drm/drm_plane.c
+++ b/drivers/gpu/drm/drm_plane.c
@@ -211,6 +211,9 @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
format_modifier_count++;
}
+ if (format_modifier_count)
+ config->allow_fb_modifiers = true;
+
plane->modifier_count = format_modifier_count;
plane->modifiers = kmalloc_array(format_modifier_count,
sizeof(format_modifiers[0]),
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 172/187] drm/nouveau: Stop using drm_crtc_force_disable
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (170 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 171/187] drm: Auto-set allow_fb_modifiers when given modifiers at plane init Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 173/187] x86/build: Specify elf_i386 linker emulation explicitly for i386 objects Greg Kroah-Hartman
` (19 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ville Syrjälä,
Sean Paul, Daniel Vetter, Sasha Levin, Alex Deucher
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 934c5b32a5e43d8de2ab4f1566f91d7c3bf8cb64 ]
The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.
Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.
v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 6a4ca139cf5d..8fd8124d72ba 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -750,7 +750,9 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
/* Disable the crtc to ensure a full modeset is
* performed whenever it's turned on again. */
if (crtc)
- drm_crtc_force_disable(crtc);
+ drm_crtc_helper_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y,
+ crtc->primary->fb);
}
return 0;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 173/187] x86/build: Specify elf_i386 linker emulation explicitly for i386 objects
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (171 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 172/187] drm/nouveau: Stop using drm_crtc_force_disable Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 174/187] selinux: do not override context on context mounts Greg Kroah-Hartman
` (18 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Golovin, George Rimar, Tri Vo,
Borislav Petkov, Nick Desaulniers, H. Peter Anvin, Ingo Molnar,
Michael Matz, Thomas Gleixner, morbo, ruiu, x86-ml, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 927185c124d62a9a4d35878d7f6d432a166b74e3 ]
The kernel uses the OUTPUT_FORMAT linker script command in it's linker
scripts. Most of the time, the -m option is passed to the linker with
correct architecture, but sometimes (at least for x86_64) the -m option
contradicts the OUTPUT_FORMAT directive.
Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object
files, but are linked with the -m elf_x86_64 linker flag when building
for x86_64.
The GNU linker manpage doesn't explicitly state any tie-breakers between
-m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT
overrides the emulation value specified with the -m option.
LLVM lld has a different behavior, however. When supplied with
contradicting -m and OUTPUT_FORMAT values it fails with the following
error message:
ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64
Therefore, just add the correct -m after the incorrect one (it overrides
it), so the linker invocation looks like this:
ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \
realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf
This is not a functional change for GNU ld, because (although not
explicitly documented) OUTPUT_FORMAT overrides -m EMULATION.
Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting
it in QEMU.
[ bp: massage and clarify text. ]
Suggested-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: George Rimar <grimar@accesssoftek.com>
Signed-off-by: Tri Vo <trong@android.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tri Vo <trong@android.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Matz <matz@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morbo@google.com
Cc: ndesaulniers@google.com
Cc: ruiu@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190111201012.71210-1-trong@android.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/boot/Makefile | 2 +-
arch/x86/realmode/rm/Makefile | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 9b5adae9cc40..e2839b5c246c 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -100,7 +100,7 @@ $(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
AFLAGS_header.o += -I$(objtree)/$(obj)
$(obj)/header.o: $(obj)/zoffset.h
-LDFLAGS_setup.elf := -T
+LDFLAGS_setup.elf := -m elf_i386 -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
$(call if_changed,ld)
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index 4463fa72db94..96cb20de08af 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -47,7 +47,7 @@ $(obj)/pasyms.h: $(REALMODE_OBJS) FORCE
targets += realmode.lds
$(obj)/realmode.lds: $(obj)/pasyms.h
-LDFLAGS_realmode.elf := --emit-relocs -T
+LDFLAGS_realmode.elf := -m elf_i386 --emit-relocs -T
CPPFLAGS_realmode.lds += -P -C -I$(objtree)/$(obj)
targets += realmode.elf
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 174/187] selinux: do not override context on context mounts
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (172 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 173/187] x86/build: Specify elf_i386 linker emulation explicitly for i386 objects Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 175/187] brcmfmac: Use firmware_request_nowarn for the clm_blob Greg Kroah-Hartman
` (17 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ondrej Mosnacek, Stephen Smalley,
Paul Moore, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 53e0c2aa9a59a48e3798ef193d573ade85aa80f5 ]
Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT
flag unset. This is achived by returning -EOPNOTSUPP for this case in
selinux_inode_setsecurtity() (because that function should not be called
in such case anyway) and translating this error to 0 in
selinux_inode_notifysecctx().
This fixes behavior of kernfs-based filesystems when mounted with the
'context=' option. Before this patch, if a node's context had been
explicitly set to a non-default value and later the filesystem has been
remounted with the 'context=' option, then this node would show up as
having the manually-set context and not the mount-specified one.
Steps to reproduce:
# mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified
# chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.threads
# umount /sys/fs/cgroup/unified
# mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified
Result before:
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads
Result after:
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/selinux/hooks.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 6ea3d3aa1a1e..4337b6d9369e 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3458,12 +3458,16 @@ static int selinux_inode_setsecurity(struct inode *inode, const char *name,
const void *value, size_t size, int flags)
{
struct inode_security_struct *isec = inode_security_novalidate(inode);
+ struct superblock_security_struct *sbsec = inode->i_sb->s_security;
u32 newsid;
int rc;
if (strcmp(name, XATTR_SELINUX_SUFFIX))
return -EOPNOTSUPP;
+ if (!(sbsec->flags & SBLABEL_MNT))
+ return -EOPNOTSUPP;
+
if (!value || !size)
return -EACCES;
@@ -6612,7 +6616,10 @@ static void selinux_inode_invalidate_secctx(struct inode *inode)
*/
static int selinux_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
{
- return selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX, ctx, ctxlen, 0);
+ int rc = selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX,
+ ctx, ctxlen, 0);
+ /* Do not return error when suppressing label (SBLABEL_MNT not set). */
+ return rc == -EOPNOTSUPP ? 0 : rc;
}
/*
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 175/187] brcmfmac: Use firmware_request_nowarn for the clm_blob
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (173 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 174/187] selinux: do not override context on context mounts Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 176/187] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure Greg Kroah-Hartman
` (16 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Kalle Valo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4ad0be160544ffbdafb7cec39bb8e6dd0a97317a ]
The linux-firmware brcmfmac firmware files contain an embedded table with
per country allowed channels and strength info.
For recent hardware these versions of the firmware are specially build for
linux-firmware, the firmware files directly available from Cypress rely on
a separate clm_blob file for this info.
For some unknown reason Cypress refuses to provide the standard firmware
files + clm_blob files it uses elsewhere for inclusion into linux-firmware,
instead relying on these special builds with the clm_blob info embedded.
This means that the linux-firmware firmware versions often lag behind,
but I digress.
The brcmfmac driver does support the separate clm_blob file and always
tries to load this. Currently we use request_firmware for this. This means
that on any standard install, using the standard combo of linux-kernel +
linux-firmware, we will get a warning:
"Direct firmware load for ... failed with error -2"
On top of this, brcmfmac itself prints: "no clm_blob available (err=-2),
device may have limited channels available".
This commit switches to firmware_request_nowarn, fixing almost any brcmfmac
device logging the warning (it leaves the brcmfmac info message in place).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index cd3651069d0c..27893af63ebc 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -149,7 +149,7 @@ static int brcmf_c_process_clm_blob(struct brcmf_if *ifp)
return err;
}
- err = request_firmware(&clm, clm_name, bus->dev);
+ err = firmware_request_nowarn(&clm, clm_name, bus->dev);
if (err) {
brcmf_info("no clm_blob available (err=%d), device may have limited channels available\n",
err);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 176/187] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (174 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 175/187] brcmfmac: Use firmware_request_nowarn for the clm_blob Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 177/187] x86/build: Mark per-CPU symbols as absolute explicitly for LLD Greg Kroah-Hartman
` (15 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zumeng Chen, Kalle Valo, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]
Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):
unreferenced object 0xc28a9a00 (size 512):
comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<6624adab>] kmemleak_alloc+0x40/0x74
[<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
[<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
[<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
[<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
[<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
[<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
[<7e1d425a>] process_one_work+0x284/0x42c
[<55f9432e>] worker_thread+0x2fc/0x48c
[<abb582c6>] kthread+0x148/0x160
[<63144b13>] ret_from_fork+0x14/0x2c
[< (null)>] (null)
[<1f6e7715>] 0xffffffff
Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ti/wlcore/main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 19e3c5a0b715..2ca5658bbc2a 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1084,8 +1084,11 @@ static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt)
goto out;
ret = wl12xx_fetch_firmware(wl, plt);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ kfree(wl->fw_status);
+ kfree(wl->raw_fw_status);
+ kfree(wl->tx_res_if);
+ }
out:
return ret;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 177/187] x86/build: Mark per-CPU symbols as absolute explicitly for LLD
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (175 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 176/187] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 178/187] drm/fb-helper: fix leaks in error path of drm_fb_helper_fbdev_setup Greg Kroah-Hartman
` (14 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Golovin,
Rafael Ávila de Espíndola, Nick Desaulniers,
Borislav Petkov, H. Peter Anvin, Andy Lutomirski, Brijesh Singh,
Cao Jin, Ingo Molnar, Joerg Roedel, Masahiro Yamada,
Masami Hiramatsu, Thomas Gleixner, Tri Vo, morbo, x86-ml,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d071ae09a4a1414c1433d5ae9908959a7325b0ad ]
Accessing per-CPU variables is done by finding the offset of the
variable in the per-CPU block and adding it to the address of the
respective CPU's block.
Section 3.10.8 of ld.bfd's documentation states:
For expressions involving numbers, relative addresses and absolute
addresses, ld follows these rules to evaluate terms:
Other binary operations, that is, between two relative addresses
not in the same section, or between a relative address and an
absolute address, first convert any non-absolute term to an
absolute address before applying the operator."
Note that LLVM's linker does not adhere to the GNU ld's implementation
and as such requires implicitly-absolute terms to be explicitly marked
as absolute in the linker script. If not, it fails currently with:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute
Makefile:1040: recipe for target 'vmlinux' failed
This is not a functional change for ld.bfd which converts the term to an
absolute symbol anyways as specified above.
Based on a previous submission by Tri Vo <trong@android.com>.
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Rafael Ávila de Espíndola <rafael@espindo.la>
[ Update commit message per Boris' and Michael's suggestions. ]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[ Massage commit message more, fix typos. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Dmitry Golovin <dima@golovin.in>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Cao Jin <caoj.fnst@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tri Vo <trong@android.com>
Cc: dima@golovin.in
Cc: morbo@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181219190145.252035-1-ndesaulniers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/vmlinux.lds.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 5dd3317d761f..c63bab98780c 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -411,7 +411,7 @@ SECTIONS
* Per-cpu symbols which need to be offset from __per_cpu_load
* for the boot processor.
*/
-#define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
+#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
INIT_PER_CPU(gdt_page);
INIT_PER_CPU(irq_stack_union);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 178/187] drm/fb-helper: fix leaks in error path of drm_fb_helper_fbdev_setup
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (176 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 177/187] x86/build: Mark per-CPU symbols as absolute explicitly for LLD Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 179/187] clk: meson: clean-up clock registration Greg Kroah-Hartman
` (13 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot,
Noralf Trønnes, Peter Wu, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 00eb5b0da8d27b3c944bfc959c3344d665caae26 ]
After drm_fb_helper_fbdev_setup calls drm_fb_helper_init,
"dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will
have some effect). After that, drm_fb_helper_initial_config is called
which may call the "fb_probe" driver callback.
This driver callback may call drm_fb_helper_defio_init (as is done by
drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs)
as documented. These are normally cleaned up on exit by
drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini.
If an error occurs after "fb_probe", but before setup is complete, then
calling just drm_fb_helper_fini will leak resources. This was triggered
by df2052cc922 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"):
[ 50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
[ 50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38)
[ 50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2
[ 50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0
[ 50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 4.20.0-rc7 #1
[ 50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0
...
[ 50.023155] Call Trace:
[ 50.023155] ? bochs_kms_fini+0x1e/0x30
[ 50.023155] ? bochs_unload+0x18/0x40
This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n.
Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian
Link: https://lkml.kernel.org/r/20181223004315.GA11455@al
Fixes: 8741216396b2 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_fb_helper.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index e65596617239..a0663f44e218 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -2877,7 +2877,7 @@ int drm_fb_helper_fbdev_setup(struct drm_device *dev,
return 0;
err_drm_fb_helper_fini:
- drm_fb_helper_fini(fb_helper);
+ drm_fb_helper_fbdev_teardown(dev);
return ret;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 179/187] clk: meson: clean-up clock registration
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (177 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 178/187] drm/fb-helper: fix leaks in error path of drm_fb_helper_fbdev_setup Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 180/187] clk: rockchip: fix frac settings of GPLL clock for rk3328 Greg Kroah-Hartman
` (12 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jerome Brunet, Neil Armstrong, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8d9981efbcab066d17af4d3c85c169200f6f78df ]
Order, ids and size between the table of regmap clocks and the onecell
data table could be different.
Set regmap pointer in all the regmap clocks before starting the
registration using the onecell data, to make sure we don't
get into an incoherent situation.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181221160239.26265-3-jbrunet@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/meson/meson-aoclk.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c
index f965845917e3..258c8d259ea1 100644
--- a/drivers/clk/meson/meson-aoclk.c
+++ b/drivers/clk/meson/meson-aoclk.c
@@ -65,15 +65,20 @@ int meson_aoclkc_probe(struct platform_device *pdev)
return ret;
}
- /*
- * Populate regmap and register all clks
- */
- for (clkid = 0; clkid < data->num_clks; clkid++) {
+ /* Populate regmap */
+ for (clkid = 0; clkid < data->num_clks; clkid++)
data->clks[clkid]->map = regmap;
+ /* Register all clks */
+ for (clkid = 0; clkid < data->hw_data->num; clkid++) {
+ if (!data->hw_data->hws[clkid])
+ continue;
+
ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]);
- if (ret)
+ if (ret) {
+ dev_err(dev, "Clock registration failed\n");
return ret;
+ }
}
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 180/187] clk: rockchip: fix frac settings of GPLL clock for rk3328
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (178 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 179/187] clk: meson: clean-up clock registration Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 181/187] dmaengine: tegra: avoid overflow of byte tracking Greg Kroah-Hartman
` (11 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Katsuhiro Suzuki, Elaine Zhang,
Heiko Stuebner, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a0e447b0c50240a90ab84b7126b3c06b0bab4adc ]
This patch fixes settings of GPLL frequency in fractional mode for
rk3328. In this mode, FOUTVCO is calcurated by following formula:
FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24)
The problem is in FREF * FRAC >> 24 term. This result always lacks
one from target value is specified by rate member. For example first
itme of rk3328_pll_frac_rate originally has
- rate : 1016064000
- refdiv: 3
- fbdiv : 127
- frac : 134217
- FREF * FBDIV / REFDIV = 1016000000
- (FREF * FRAC / REFDIV) >> 24 = 63999
Thus calculated rate is 1016063999. It seems wrong.
If frac has 134218 (it is increased 1 from original value), second
term is 64000. All other items have same situation. So this patch
adds 1 to frac member in all items of rk3328_pll_frac_rate.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Acked-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/rockchip/clk-rk3328.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
index 2c5426607790..e431661fe874 100644
--- a/drivers/clk/rockchip/clk-rk3328.c
+++ b/drivers/clk/rockchip/clk-rk3328.c
@@ -78,17 +78,17 @@ static struct rockchip_pll_rate_table rk3328_pll_rates[] = {
static struct rockchip_pll_rate_table rk3328_pll_frac_rates[] = {
/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
- RK3036_PLL_RATE(1016064000, 3, 127, 1, 1, 0, 134217),
+ RK3036_PLL_RATE(1016064000, 3, 127, 1, 1, 0, 134218),
/* vco = 1016064000 */
- RK3036_PLL_RATE(983040000, 24, 983, 1, 1, 0, 671088),
+ RK3036_PLL_RATE(983040000, 24, 983, 1, 1, 0, 671089),
/* vco = 983040000 */
- RK3036_PLL_RATE(491520000, 24, 983, 2, 1, 0, 671088),
+ RK3036_PLL_RATE(491520000, 24, 983, 2, 1, 0, 671089),
/* vco = 983040000 */
- RK3036_PLL_RATE(61440000, 6, 215, 7, 2, 0, 671088),
+ RK3036_PLL_RATE(61440000, 6, 215, 7, 2, 0, 671089),
/* vco = 860156000 */
- RK3036_PLL_RATE(56448000, 12, 451, 4, 4, 0, 9797894),
+ RK3036_PLL_RATE(56448000, 12, 451, 4, 4, 0, 9797895),
/* vco = 903168000 */
- RK3036_PLL_RATE(40960000, 12, 409, 4, 5, 0, 10066329),
+ RK3036_PLL_RATE(40960000, 12, 409, 4, 5, 0, 10066330),
/* vco = 819200000 */
{ /* sentinel */ },
};
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 181/187] dmaengine: tegra: avoid overflow of byte tracking
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (179 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 180/187] clk: rockchip: fix frac settings of GPLL clock for rk3328 Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 182/187] Input: soc_button_array - fix mapping of the 5th GPIO in a PNP0C40 device Greg Kroah-Hartman
` (10 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Osipenko, Ben Dooks,
Jon Hunter, Vinod Koul, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ]
The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.
When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.
To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.
Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/tegra20-apb-dma.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 9a558e30c461..8219ab88a507 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -636,7 +636,10 @@ static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,
sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq), node);
dma_desc = sgreq->dma_desc;
- dma_desc->bytes_transferred += sgreq->req_len;
+ /* if we dma for long enough the transfer count will wrap */
+ dma_desc->bytes_transferred =
+ (dma_desc->bytes_transferred + sgreq->req_len) %
+ dma_desc->bytes_requested;
/* Callback need to be call */
if (!dma_desc->cb_count)
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 182/187] Input: soc_button_array - fix mapping of the 5th GPIO in a PNP0C40 device
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (180 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 181/187] dmaengine: tegra: avoid overflow of byte tracking Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 183/187] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers Greg Kroah-Hartman
` (9 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Dmitry Torokhov, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e9eb788f9442d1b5d93efdb30c3be071ce8a22b1 ]
The Microsoft documenation for the PNP0C40 device aka the
"Windows-compatible button array" describes the 5th GpioInt listed in
the resources as: '5. Interrupt corresponding to the "Rotation Lock"
button, if supported'.
Notice this describes the 5th entry as a button while we sofar have been
mapping it to EV_SW, SW_ROTATE_LOCK. On my Point of View TAB P1006W-232
which actually comes with a rotation-lock button, the button indeed is a
button and not a slider/switch. An image search for other Windows tablets
has found 2 more models with a rotation-lock button and on both of those
it too is a push-button and not a slider/switch.
Further evidence can be found in the HUT extension HUTRR52 from Microsoft
which adds rotation lock support to the HUT, which describes 2 different
usages: "0xC9 System Display Rotation Lock Button" and
"0xCA System Display Rotation Lock Slider Switch" note that switch is seen
as a separate thing here and the non switch wording is an exact match for
the "Windows-compatible button array" spec wording.
TL;DR: our current mapping of the 5th GPIO to SW_ROTATE_LOCK is wrong
because the 5th GPIO is for a push-button not a switch.
This commit fixes this by maping the 5th GPIO to KEY_ROTATE_LOCK_TOGGLE.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/misc/soc_button_array.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index 23520df7650f..55cd6e0b409c 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -373,7 +373,7 @@ static struct soc_button_info soc_button_PNP0C40[] = {
{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true },
{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false },
- { "rotation_lock", 4, EV_SW, SW_ROTATE_LOCK, false, false },
+ { "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false },
{ }
};
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 183/187] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (181 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 182/187] Input: soc_button_array - fix mapping of the 5th GPIO in a PNP0C40 device Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 184/187] net: stmmac: Avoid one more sometimes uninitialized Clang warning Greg Kroah-Hartman
` (8 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Brian Vincent,
Ville Syrjälä,
Dhinakaran Pandiyan, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ]
We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.
To quote the E-DDC spec:
"... this standard requires that the segment pointer be
reset to 00h when a NO ACK or a STOP condition is received."
Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.
Cc: Brian Vincent <brainn@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index d708472d93c4..65f58e23e03d 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3278,6 +3278,7 @@ static int drm_dp_mst_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs
msg.u.i2c_read.transactions[i].i2c_dev_id = msgs[i].addr;
msg.u.i2c_read.transactions[i].num_bytes = msgs[i].len;
msg.u.i2c_read.transactions[i].bytes = msgs[i].buf;
+ msg.u.i2c_read.transactions[i].no_stop_bit = !(msgs[i].flags & I2C_M_STOP);
}
msg.u.i2c_read.read_i2c_device_id = msgs[num - 1].addr;
msg.u.i2c_read.num_bytes_read = msgs[num - 1].len;
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 184/187] net: stmmac: Avoid one more sometimes uninitialized Clang warning
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (182 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 183/187] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 185/187] ACPI / video: Extend chassis-type detection with a "Lunch Box" check Greg Kroah-Hartman
` (7 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nick Desaulniers, Nathan Chancellor,
David S. Miller, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1f5d861f7fefa971b2c6e766f77932c86419a319 ]
When building with -Wsometimes-uninitialized, Clang warns:
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever '&&' condition is false
[-Werror,-Wsometimes-uninitialized]
Clang is concerned with the use of stmmac_do_void_callback (which
stmmac_get_systime wraps), as it may fail to initialize these values if
the if condition was ever false (meaning the callback doesn't exist).
It's not wrong because the callback is what initializes ns. While it's
unlikely that the callback is going to disappear at some point and make
that condition false, we can easily avoid this warning by zero
initializing the variable.
Link: https://github.com/ClangBuiltLinux/linux/issues/384
Fixes: df103170854e ("net: stmmac: Avoid sometimes uninitialized Clang warnings")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 2293e21f789f..cc60b3fb0892 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -105,7 +105,7 @@ static int stmmac_get_time(struct ptp_clock_info *ptp, struct timespec64 *ts)
struct stmmac_priv *priv =
container_of(ptp, struct stmmac_priv, ptp_clock_ops);
unsigned long flags;
- u64 ns;
+ u64 ns = 0;
spin_lock_irqsave(&priv->ptp_lock, flags);
stmmac_get_systime(priv, priv->ptpaddr, &ns);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 185/187] ACPI / video: Extend chassis-type detection with a "Lunch Box" check
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (183 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 184/187] net: stmmac: Avoid one more sometimes uninitialized Clang warning Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 186/187] bcache: fix potential div-zero error of writeback_rate_p_term_inverse Greg Kroah-Hartman
` (6 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Rafael J. Wysocki,
Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d693c008e3ca04db5916ff72e68ce661888a913b ]
Commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") introduced chassis type detection, limiting the
lcd_only check for the backlight to devices where the chassis-type
indicates their is no builtin LCD panel.
The purpose of the lcd_only check is to avoid advertising a backlight
interface on desktops, since skylake and newer machines seem to always
have a backlight interface even if there is no LCD panel. The limiting
of this check to desktops only was done to avoid breaking backlight
support on some laptops which do not have the lcd flag set.
The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine
has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check
we end up falsely advertising backlight/brightness control on this
device. This commit extend the dmi_is_desktop check to return true
for type 0x10 to fix this.
Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/acpi/acpi_video.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index 1ab1460c4a4e..d73afb562ad9 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2143,6 +2143,7 @@ static bool dmi_is_desktop(void)
case 0x05: /* Pizza Box */
case 0x06: /* Mini Tower */
case 0x07: /* Tower */
+ case 0x10: /* Lunch Box */
case 0x11: /* Main Server Chassis */
return true;
}
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 186/187] bcache: fix potential div-zero error of writeback_rate_p_term_inverse
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (184 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 185/187] ACPI / video: Extend chassis-type detection with a "Lunch Box" check Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-04 8:48 ` [PATCH 4.19 187/187] kprobes/x86: Blacklist non-attachable interrupt functions Greg Kroah-Hartman
` (5 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Coly Li, Jens Axboe, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5b5fd3c94eef69dcfaa8648198e54c92e5687d6d ]
Current code already uses d_strtoul_nonzero() to convert input string
to an unsigned integer, to make sure writeback_rate_p_term_inverse
won't be zero value. But overflow may happen when converting input
string to an unsigned integer value by d_strtoul_nonzero(), then
dc->writeback_rate_p_term_inverse can still be set to 0 even if the
sysfs file input value is not zero, e.g. 4294967296 (a.k.a UINT_MAX+1).
If dc->writeback_rate_p_term_inverse is set to 0, it might cause a
dev-zero error in following code from __update_writeback_rate(),
int64_t proportional_scaled =
div_s64(error, dc->writeback_rate_p_term_inverse);
This patch replaces d_strtoul_nonzero() by sysfs_strtoul_clamp() and
limit the value range in [1, UINT_MAX]. Then the unsigned integer
overflow and dev-zero error can be avoided.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/md/bcache/sysfs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 503ad954ccc0..d9481640b3e1 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -286,7 +286,9 @@ STORE(__cached_dev)
sysfs_strtoul_clamp(writeback_rate_i_term_inverse,
dc->writeback_rate_i_term_inverse,
1, UINT_MAX);
- d_strtoul_nonzero(writeback_rate_p_term_inverse);
+ sysfs_strtoul_clamp(writeback_rate_p_term_inverse,
+ dc->writeback_rate_p_term_inverse,
+ 1, UINT_MAX);
d_strtoul_nonzero(writeback_rate_minimum);
sysfs_strtoul_clamp(io_error_limit, dc->error_limit, 0, INT_MAX);
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* [PATCH 4.19 187/187] kprobes/x86: Blacklist non-attachable interrupt functions
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (185 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 186/187] bcache: fix potential div-zero error of writeback_rate_p_term_inverse Greg Kroah-Hartman
@ 2019-04-04 8:48 ` Greg Kroah-Hartman
2019-04-05 4:54 ` [PATCH 4.19 000/187] 4.19.34-stable review Naresh Kamboju
` (4 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Greg Kroah-Hartman @ 2019-04-04 8:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrea Righi, Andy Lutomirski,
Anil S Keshavamurthy, Borislav Petkov, David S. Miller,
Linus Torvalds, Masami Hiramatsu, Naveen N. Rao, Peter Zijlstra,
Thomas Gleixner, Yonghong Song, Ingo Molnar, Sasha Levin
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a50480cb6d61d5c5fc13308479407b628b6bc1c5 ]
These interrupt functions are already non-attachable by kprobes.
Blacklist them explicitly so that they can show up in
/sys/kernel/debug/kprobes/blacklist and tools like BCC can use this
additional information.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lkml.kernel.org/r/20181206095648.GA8249@Dell
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/entry/entry_64.S | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index f95dcb209fdf..617df50a11d9 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -627,6 +627,7 @@ ENTRY(interrupt_entry)
ret
END(interrupt_entry)
+_ASM_NOKPROBE(interrupt_entry)
/* Interrupt entry/exit. */
@@ -826,6 +827,7 @@ native_irq_return_ldt:
jmp native_irq_return_iret
#endif
END(common_interrupt)
+_ASM_NOKPROBE(common_interrupt)
/*
* APIC interrupts.
@@ -840,6 +842,7 @@ ENTRY(\sym)
call \do_sym /* rdi points to pt_regs */
jmp ret_from_intr
END(\sym)
+_ASM_NOKPROBE(\sym)
.endm
/* Make sure APIC interrupt handlers end up in the irqentry section: */
@@ -984,6 +987,7 @@ ENTRY(\sym)
jmp error_exit
.endif
+_ASM_NOKPROBE(\sym)
END(\sym)
.endm
--
2.19.1
^ permalink raw reply related [flat|nested] 196+ messages in thread* Re: [PATCH 4.19 000/187] 4.19.34-stable review
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (186 preceding siblings ...)
2019-04-04 8:48 ` [PATCH 4.19 187/187] kprobes/x86: Blacklist non-attachable interrupt functions Greg Kroah-Hartman
@ 2019-04-05 4:54 ` Naresh Kamboju
2019-04-05 5:44 ` kernelci.org bot
` (3 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: Naresh Kamboju @ 2019-04-05 4:54 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Shuah Khan, patches, lkft-triage, Ben Hutchings,
linux- stable, Andrew Morton, Linus Torvalds, Guenter Roeck
On Thu, 4 Apr 2019 at 14:31, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.34 release.
> There are 187 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 6 08:44:30 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.34-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.19.34-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 4b338ef616b3d99a0c49c952acec89b827db9c1b
git describe: v4.19.33-187-g4b338ef616b3
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.33-187-g4b338ef616b3
No regressions (compared to build v4.19.32-323-g8822c8438169)
No fixes (compared to build v4.19.32-323-g8822c8438169)
Ran 23543 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 196+ messages in thread* Re: [PATCH 4.19 000/187] 4.19.34-stable review
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (187 preceding siblings ...)
2019-04-05 4:54 ` [PATCH 4.19 000/187] 4.19.34-stable review Naresh Kamboju
@ 2019-04-05 5:44 ` kernelci.org bot
2019-04-05 15:14 ` shuah
` (2 subsequent siblings)
191 siblings, 0 replies; 196+ messages in thread
From: kernelci.org bot @ 2019-04-05 5:44 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
ben.hutchings, lkft-triage, stable
stable-rc/linux-4.19.y boot: 120 boots: 13 failed, 90 passed with 16 offline, 1 untried/unknown (v4.19.33-187-g4b338ef616b3)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.33-187-g4b338ef616b3/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.33-187-g4b338ef616b3/
Tree: stable-rc
Branch: linux-4.19.y
Git Describe: v4.19.33-187-g4b338ef616b3
Git Commit: 4b338ef616b3d99a0c49c952acec89b827db9c1b
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 66 unique boards, 23 SoC families, 14 builds out of 206
Boot Regressions Detected:
arm64:
defconfig:
gcc-7:
meson-gxbb-nanopi-k2:
lab-baylibre: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
meson-gxbb-odroidc2:
lab-baylibre-seattle: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
meson-gxbb-p200:
lab-baylibre-seattle: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
meson-gxl-s805x-p241:
lab-baylibre: failing since 3 days (last pass: v4.19.32-135-g64b7b716f98c - first fail: v4.19.32-135-gd6e41cce5aee)
meson-gxl-s905d-p230:
lab-baylibre-seattle: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
meson-gxl-s905x-khadas-vim:
lab-baylibre-seattle: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
meson-gxl-s905x-libretech-cc:
lab-baylibre: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
lab-baylibre-seattle: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
meson-gxl-s905x-nexbox-a95x:
lab-baylibre-seattle: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
meson-gxl-s905x-p212:
lab-baylibre-seattle: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
meson-gxm-nexbox-a1:
lab-baylibre-seattle: failing since 1 day (last pass: v4.19.32-135-g01a3983fac4e - first fail: v4.19.32-323-g8822c8438169)
Boot Failures Detected:
arm64:
defconfig:
gcc-7:
meson-gxbb-nanopi-k2: 1 failed lab
meson-gxbb-odroidc2: 1 failed lab
meson-gxbb-p200: 1 failed lab
meson-gxl-s805x-p241: 1 failed lab
meson-gxl-s905d-p230: 1 failed lab
meson-gxl-s905x-khadas-vim: 1 failed lab
meson-gxl-s905x-libretech-cc: 1 failed lab
meson-gxl-s905x-nexbox-a95x: 1 failed lab
meson-gxl-s905x-p212: 1 failed lab
meson-gxm-nexbox-a1: 1 failed lab
Offline Platforms:
arm:
bcm2835_defconfig:
gcc-7
bcm2835-rpi-b: 1 offline lab
multi_v7_defconfig:
gcc-7
alpine-db: 1 offline lab
at91-sama5d4_xplained: 1 offline lab
qcom-apq8064-cm-qs600: 1 offline lab
qcom-apq8064-ifc6410: 1 offline lab
socfpga_cyclone5_de0_sockit: 1 offline lab
sun5i-r8-chip: 1 offline lab
tegra124-jetson-tk1: 1 offline lab
tegra_defconfig:
gcc-7
tegra124-jetson-tk1: 1 offline lab
sunxi_defconfig:
gcc-7
sun5i-r8-chip: 1 offline lab
sama5_defconfig:
gcc-7
at91-sama5d4_xplained: 1 offline lab
qcom_defconfig:
gcc-7
qcom-apq8064-cm-qs600: 1 offline lab
qcom-apq8064-ifc6410: 1 offline lab
arm64:
defconfig:
gcc-7
apq8016-sbc: 1 offline lab
juno-r2: 1 offline lab
mt7622-rfb1: 1 offline lab
---
For more info write to <info@kernelci.org>
^ permalink raw reply [flat|nested] 196+ messages in thread* Re: [PATCH 4.19 000/187] 4.19.34-stable review
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (188 preceding siblings ...)
2019-04-05 5:44 ` kernelci.org bot
@ 2019-04-05 15:14 ` shuah
2019-04-05 15:39 ` Jon Hunter
2019-04-05 18:31 ` Guenter Roeck
191 siblings, 0 replies; 196+ messages in thread
From: shuah @ 2019-04-05 15:14 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, patches, ben.hutchings, lkft-triage,
stable, shuah
On 4/4/19 2:45 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.34 release.
> There are 187 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 6 08:44:30 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.34-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 196+ messages in thread* Re: [PATCH 4.19 000/187] 4.19.34-stable review
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (189 preceding siblings ...)
2019-04-05 15:14 ` shuah
@ 2019-04-05 15:39 ` Jon Hunter
2019-04-05 18:31 ` Guenter Roeck
191 siblings, 0 replies; 196+ messages in thread
From: Jon Hunter @ 2019-04-05 15:39 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
lkft-triage, stable
On 04/04/2019 09:45, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.34 release.
> There are 187 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 6 08:44:30 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.34-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.19:
11 builds: 11 pass, 0 fail
22 boots: 22 pass, 0 fail
30 tests: 30 pass, 0 fail
Linux version: 4.19.34-rc1-g8822c84
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 196+ messages in thread* Re: [PATCH 4.19 000/187] 4.19.34-stable review
2019-04-04 8:45 [PATCH 4.19 000/187] 4.19.34-stable review Greg Kroah-Hartman
` (190 preceding siblings ...)
2019-04-05 15:39 ` Jon Hunter
@ 2019-04-05 18:31 ` Guenter Roeck
191 siblings, 0 replies; 196+ messages in thread
From: Guenter Roeck @ 2019-04-05 18:31 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, ben.hutchings,
lkft-triage, stable
On Thu, Apr 04, 2019 at 10:45:37AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.34 release.
> There are 187 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Apr 6 08:44:30 UTC 2019.
> Anything received after that time might be too late.
>
For v4.19.33-187-g4b338ef616b3:
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 345 pass: 345 fail: 0
Guenter
^ permalink raw reply [flat|nested] 196+ messages in thread