linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: dri-devel@lists.freedesktop.org
Cc: noralf@tronnes.org, sam@ravnborg.org,
	Gerd Hoffmann <kraxel@redhat.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Sean Paul <sean@poorly.run>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 3/5] drm: add drm_fb_xrgb8888_to_rgb565_dstclip()
Date: Fri,  5 Apr 2019 11:52:17 +0200	[thread overview]
Message-ID: <20190405095219.9231-4-kraxel@redhat.com> (raw)
In-Reply-To: <20190405095219.9231-1-kraxel@redhat.com>

It is a drm_fb_xrgb8888_to_rgb565() variant which checks the clip
rectangle for the destination too.

Common code between drm_fb_xrgb8888_to_rgb565() and
drm_fb_xrgb8888_to_rgb565_dstclip() was factored out into the
drm_fb_xrgb8888_to_rgb565_lines() helper function.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 include/drm/drm_format_helper.h     |   5 +-
 drivers/gpu/drm/drm_format_helper.c | 113 ++++++++++++++++++++--------
 2 files changed, 86 insertions(+), 32 deletions(-)

diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h
index c52b7b9a25f0..a84d71fa446b 100644
--- a/include/drm/drm_format_helper.h
+++ b/include/drm/drm_format_helper.h
@@ -19,9 +19,12 @@ void drm_fb_memcpy_dstclip(void *dst, void *vaddr, struct drm_framebuffer *fb,
 			   struct drm_rect *clip);
 void drm_fb_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb,
 		   struct drm_rect *clip);
-void drm_fb_xrgb8888_to_rgb565(u16 *dst, void *vaddr,
+void drm_fb_xrgb8888_to_rgb565(void *dst, void *vaddr,
 			       struct drm_framebuffer *fb,
 			       struct drm_rect *clip, bool swap);
+void drm_fb_xrgb8888_to_rgb565_dstclip(void *dst, unsigned int dst_pitch,
+				       void *vaddr, struct drm_framebuffer *fb,
+				       struct drm_rect *clip, bool swap);
 void drm_fb_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb,
 			      struct drm_rect *clip);
 
diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
index 55a2d629a75f..246775510c2e 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -110,6 +110,44 @@ void drm_fb_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb,
 }
 EXPORT_SYMBOL(drm_fb_swab16);
 
+static void drm_fb_xrgb8888_to_rgb565_lines(void *dst, unsigned int dst_pitch,
+					    void *src, unsigned int src_pitch,
+					    unsigned int src_linelength,
+					    unsigned int lines,
+					    bool swap)
+{
+	unsigned int linepixels = src_linelength / sizeof(u32);
+	unsigned int x, y;
+	u32 *sbuf;
+	u16 *dbuf, val16;
+
+	/*
+	 * The cma memory is write-combined so reads are uncached.
+	 * Speed up by fetching one line at a time.
+	 */
+	sbuf = kmalloc(src_linelength, GFP_KERNEL);
+	if (!sbuf)
+		return;
+
+	for (y = 0; y < lines; y++) {
+		memcpy(sbuf, src, src_linelength);
+		dbuf = dst;
+		for (x = 0; x < linepixels; x++) {
+			val16 = ((sbuf[x] & 0x00F80000) >> 8) |
+				((sbuf[x] & 0x0000FC00) >> 5) |
+				((sbuf[x] & 0x000000F8) >> 3);
+			if (swap)
+				*dbuf++ = swab16(val16);
+			else
+				*dbuf++ = val16;
+		}
+		src += src_pitch;
+		dst += dst_pitch;
+	}
+
+	kfree(sbuf);
+}
+
 /**
  * drm_fb_xrgb8888_to_rgb565 - Convert XRGB8888 to RGB565 clip buffer
  * @dst: RGB565 destination buffer
@@ -120,45 +158,58 @@ EXPORT_SYMBOL(drm_fb_swab16);
  *
  * Drivers can use this function for RGB565 devices that don't natively
  * support XRGB8888.
+ *
+ * This function does not apply clipping on dst, i.e. the destination
+ * is a small buffer containing the clip rect only.
  */
-void drm_fb_xrgb8888_to_rgb565(u16 *dst, void *vaddr,
+void drm_fb_xrgb8888_to_rgb565(void *dst, void *vaddr,
 			       struct drm_framebuffer *fb,
 			       struct drm_rect *clip, bool swap)
 {
-	size_t len = (clip->x2 - clip->x1) * sizeof(u32);
-	unsigned int x, y;
-	u32 *src, *buf;
-	u16 val16;
+	unsigned int src_offset = (clip->y1 * fb->pitches[0])
+		+ (clip->x1 * sizeof(u32));
+	size_t src_len = (clip->x2 - clip->x1) * sizeof(u32);
+	size_t dst_len = (clip->x2 - clip->x1) * sizeof(u16);
 
-	/*
-	 * The cma memory is write-combined so reads are uncached.
-	 * Speed up by fetching one line at a time.
-	 */
-	buf = kmalloc(len, GFP_KERNEL);
-	if (!buf)
-		return;
-
-	for (y = clip->y1; y < clip->y2; y++) {
-		src = vaddr + (y * fb->pitches[0]);
-		src += clip->x1;
-		memcpy(buf, src, len);
-		src = buf;
-		for (x = clip->x1; x < clip->x2; x++) {
-			val16 = ((*src & 0x00F80000) >> 8) |
-				((*src & 0x0000FC00) >> 5) |
-				((*src & 0x000000F8) >> 3);
-			src++;
-			if (swap)
-				*dst++ = swab16(val16);
-			else
-				*dst++ = val16;
-		}
-	}
-
-	kfree(buf);
+	drm_fb_xrgb8888_to_rgb565_lines(dst, dst_len,
+					vaddr + src_offset, fb->pitches[0],
+					src_len, clip->y2 - clip->y1,
+					swap);
 }
 EXPORT_SYMBOL(drm_fb_xrgb8888_to_rgb565);
 
+/**
+ * drm_fb_xrgb8888_to_rgb565_dstclip - Convert XRGB8888 to RGB565 clip buffer
+ * @dst: RGB565 destination buffer
+ * @dst_pitch: destination buffer pitch
+ * @vaddr: XRGB8888 source buffer
+ * @fb: DRM framebuffer
+ * @clip: Clip rectangle area to copy
+ * @swap: Swap bytes
+ *
+ * Drivers can use this function for RGB565 devices that don't natively
+ * support XRGB8888.
+ *
+ * This function applies clipping on dst, i.e. the destination is a
+ * full framebuffer but only the clip rect content is copied over.
+ */
+void drm_fb_xrgb8888_to_rgb565_dstclip(void *dst, unsigned int dst_pitch,
+				       void *vaddr, struct drm_framebuffer *fb,
+				       struct drm_rect *clip, bool swap)
+{
+	unsigned int src_offset = (clip->y1 * fb->pitches[0])
+		+ (clip->x1 * sizeof(u32));
+	unsigned int dst_offset = (clip->y1 * dst_pitch)
+		+ (clip->x1 * sizeof(u16));
+	size_t src_len = (clip->x2 - clip->x1) * sizeof(u32);
+
+	drm_fb_xrgb8888_to_rgb565_lines(dst + dst_offset, dst_pitch,
+					vaddr + src_offset, fb->pitches[0],
+					src_len, clip->y2 - clip->y1,
+					swap);
+}
+EXPORT_SYMBOL(drm_fb_xrgb8888_to_rgb565_dstclip);
+
 /**
  * drm_fb_xrgb8888_to_gray8 - Convert XRGB8888 to grayscale
  * @dst: 8-bit grayscale destination buffer
-- 
2.18.1


  parent reply	other threads:[~2019-04-05  9:52 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190405095219.9231-1-kraxel@redhat.com>
2019-04-05  9:52 ` [PATCH v3 1/5] drm: move tinydrm format conversion helpers to new drm_format_helper.c Gerd Hoffmann
2019-04-05 13:46   ` Noralf Trønnes
2019-04-15  9:31   ` Daniel Vetter
2019-04-05  9:52 ` [PATCH v3 2/5] drm: add drm_fb_memcpy_dstclip() helper Gerd Hoffmann
2019-04-05 13:51   ` Noralf Trønnes
2019-04-05  9:52 ` Gerd Hoffmann [this message]
2019-04-05 13:57   ` [PATCH v3 3/5] drm: add drm_fb_xrgb8888_to_rgb565_dstclip() Noralf Trønnes
2019-04-05  9:52 ` [PATCH v3 4/5] drm: add drm_fb_xrgb8888_to_rgb888_dstclip() Gerd Hoffmann
2019-04-05 13:59   ` Noralf Trønnes
2019-04-05  9:52 ` [PATCH v3 5/5] drm/cirrus: rewrite and modernize driver Gerd Hoffmann
2019-04-05 14:43   ` Noralf Trønnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190405095219.9231-4-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=noralf@tronnes.org \
    --cc=sam@ravnborg.org \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).