* [PATCH 2/3] devantech-srf04.yaml: add Maxbotix ultrasonic iio proximity sensors
@ 2019-04-09 19:10 Andreas Klinger
2019-04-09 21:08 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Andreas Klinger @ 2019-04-09 19:10 UTC (permalink / raw)
To: jic23, robh+dt, mark.rutland
Cc: knaack.h, lars, pmeerw, songqiang1304521, robh, m.othacehe,
linux-iio, linux-kernel, devicetree
add compatibles for Maxbotix ultrasonic iio sensor types to yaml
documentation
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
---
.../bindings/iio/proximity/devantech-srf04.yaml | 25 ++++++++++++++--------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index e7aab785c97d..4e80ea7c1475 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/iio/proximity/devantech-srf04.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Devantech SRF04 ultrasonic range finder
+title: Devantech SRF04 and Maxbotix mb1000 ultrasonic range finder
maintainers:
- Andreas Klinger <ak@it-klinger.de>
@@ -16,19 +16,28 @@ description: |
- echo-gpio is held high by the sensor after sending ultrasonic burst
until it is received once again
- Specifications about the driver can be found at:
+ Specifications about the devices can be found at:
http://www.robot-electronics.co.uk/htm/srf04tech.htm
+ http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+
properties:
compatible:
- items:
- - const: devantech,srf04
+ enum:
+ - devantech,srf04
+ - maxbotix,mb1000
+ - maxbotix,mb1010
+ - maxbotix,mb1020
+ - maxbotix,mb1030
+ - maxbotix,mb1040
trig-gpios:
description:
- Definition of the GPIO for the triggering (output) This GPIO is set
- for about 10 us by the driver to tell the device it should initiate
- the measurement cycle.
+ Definition of the GPIO for the triggering (output)
+ This GPIO is set for about 10 us by the driver to tell the device it
+ should initiate the measurement cycle.
+ See Documentation/devicetree/bindings/gpio/gpio.txt for information
+ on how to specify a consumer gpio.
maxItems: 1
echo-gpios:
@@ -40,8 +49,6 @@ properties:
trip.
It needs to be an GPIO which is able to deliver an interrupt because
the time between two interrupts is measured in the driver.
- See Documentation/devicetree/bindings/gpio/gpio.txt for information
- on how to specify a consumer gpio.
maxItems: 1
required:
--
2.11.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 2/3] devantech-srf04.yaml: add Maxbotix ultrasonic iio proximity sensors
2019-04-09 19:10 [PATCH 2/3] devantech-srf04.yaml: add Maxbotix ultrasonic iio proximity sensors Andreas Klinger
@ 2019-04-09 21:08 ` Rob Herring
2019-04-14 13:08 ` Jonathan Cameron
0 siblings, 1 reply; 3+ messages in thread
From: Rob Herring @ 2019-04-09 21:08 UTC (permalink / raw)
To: Andreas Klinger
Cc: Jonathan Cameron, Mark Rutland, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald, Song Qiang, Mathieu Othacehe,
open list:IIO SUBSYSTEM AND DRIVERS, linux-kernel, devicetree
On Tue, Apr 9, 2019 at 2:11 PM Andreas Klinger <ak@it-klinger.de> wrote:
>
> add compatibles for Maxbotix ultrasonic iio sensor types to yaml
> documentation
>
> Signed-off-by: Andreas Klinger <ak@it-klinger.de>
> ---
> .../bindings/iio/proximity/devantech-srf04.yaml | 25 ++++++++++++++--------
> 1 file changed, 16 insertions(+), 9 deletions(-)
In the future, 'dt-bindings: iio: ...' for the subject please.
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 2/3] devantech-srf04.yaml: add Maxbotix ultrasonic iio proximity sensors
2019-04-09 21:08 ` Rob Herring
@ 2019-04-14 13:08 ` Jonathan Cameron
0 siblings, 0 replies; 3+ messages in thread
From: Jonathan Cameron @ 2019-04-14 13:08 UTC (permalink / raw)
To: Rob Herring
Cc: Andreas Klinger, Mark Rutland, Hartmut Knaack,
Lars-Peter Clausen, Peter Meerwald, Song Qiang, Mathieu Othacehe,
open list:IIO SUBSYSTEM AND DRIVERS, linux-kernel, devicetree
On Tue, 9 Apr 2019 16:08:02 -0500
Rob Herring <robh+dt@kernel.org> wrote:
> On Tue, Apr 9, 2019 at 2:11 PM Andreas Klinger <ak@it-klinger.de> wrote:
> >
> > add compatibles for Maxbotix ultrasonic iio sensor types to yaml
> > documentation
> >
> > Signed-off-by: Andreas Klinger <ak@it-klinger.de>
> > ---
> > .../bindings/iio/proximity/devantech-srf04.yaml | 25 ++++++++++++++--------
> > 1 file changed, 16 insertions(+), 9 deletions(-)
>
> In the future, 'dt-bindings: iio: ...' for the subject please.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied and subject tidied up.
Thanks,
Jonathan
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-04-14 13:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-09 19:10 [PATCH 2/3] devantech-srf04.yaml: add Maxbotix ultrasonic iio proximity sensors Andreas Klinger
2019-04-09 21:08 ` Rob Herring
2019-04-14 13:08 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).