* Applied "regulator: sy8106a: Get rid of struct sy8106a" to the regulator tree
2019-04-20 3:01 [PATCH] regulator: sy8106a: Get rid of struct sy8106a Axel Lin
@ 2019-04-25 19:24 ` Mark Brown
2019-04-25 19:26 ` Mark Brown
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-04-25 19:24 UTC (permalink / raw)
To: Axel Lin; +Cc: Icenowy Zheng, Liam Girdwood, linux-kernel, Mark Brown
The patch
regulator: sy8106a: Get rid of struct sy8106a
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From e7599207d7db2fe6a7b2ba3c9a55a06da95b03f0 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 20 Apr 2019 11:01:25 +0800
Subject: [PATCH] regulator: sy8106a: Get rid of struct sy8106a
All the fields in struct sy8106a are only used in sy8106a_i2c_probe(), so
use local variables instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/sy8106a-regulator.c | 40 +++++++++------------------
1 file changed, 13 insertions(+), 27 deletions(-)
diff --git a/drivers/regulator/sy8106a-regulator.c b/drivers/regulator/sy8106a-regulator.c
index 65fbd1f0b612..42e03b2c10a0 100644
--- a/drivers/regulator/sy8106a-regulator.c
+++ b/drivers/regulator/sy8106a-regulator.c
@@ -22,12 +22,6 @@
*/
#define SY8106A_GO_BIT BIT(7)
-struct sy8106a {
- struct regulator_dev *rdev;
- struct regmap *regmap;
- u32 fixed_voltage;
-};
-
static const struct regmap_config sy8106a_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -70,36 +64,32 @@ static const struct regulator_desc sy8106a_reg = {
static int sy8106a_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct sy8106a *chip;
struct device *dev = &i2c->dev;
- struct regulator_dev *rdev = NULL;
+ struct regulator_dev *rdev;
struct regulator_config config = { };
+ struct regmap *regmap;
unsigned int reg, vsel;
+ u32 fixed_voltage;
int error;
- chip = devm_kzalloc(&i2c->dev, sizeof(struct sy8106a), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
error = of_property_read_u32(dev->of_node, "silergy,fixed-microvolt",
- &chip->fixed_voltage);
+ &fixed_voltage);
if (error)
return error;
- if (chip->fixed_voltage < SY8106A_MIN_MV * 1000 ||
- chip->fixed_voltage > SY8106A_MAX_MV * 1000)
+ if (fixed_voltage < SY8106A_MIN_MV * 1000 ||
+ fixed_voltage > SY8106A_MAX_MV * 1000)
return -EINVAL;
- chip->regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
- if (IS_ERR(chip->regmap)) {
- error = PTR_ERR(chip->regmap);
+ regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
+ if (IS_ERR(regmap)) {
+ error = PTR_ERR(regmap);
dev_err(dev, "Failed to allocate register map: %d\n", error);
return error;
}
config.dev = &i2c->dev;
- config.regmap = chip->regmap;
- config.driver_data = chip;
+ config.regmap = regmap;
config.of_node = dev->of_node;
config.init_data = of_get_regulator_init_data(dev, dev->of_node,
@@ -109,15 +99,15 @@ static int sy8106a_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
/* Ensure GO_BIT is enabled when probing */
- error = regmap_read(chip->regmap, SY8106A_REG_VOUT1_SEL, ®);
+ error = regmap_read(regmap, SY8106A_REG_VOUT1_SEL, ®);
if (error)
return error;
if (!(reg & SY8106A_GO_BIT)) {
- vsel = (chip->fixed_voltage / 1000 - SY8106A_MIN_MV) /
+ vsel = (fixed_voltage / 1000 - SY8106A_MIN_MV) /
SY8106A_STEP_MV;
- error = regmap_write(chip->regmap, SY8106A_REG_VOUT1_SEL,
+ error = regmap_write(regmap, SY8106A_REG_VOUT1_SEL,
vsel | SY8106A_GO_BIT);
if (error)
return error;
@@ -131,10 +121,6 @@ static int sy8106a_i2c_probe(struct i2c_client *i2c,
return error;
}
- chip->rdev = rdev;
-
- i2c_set_clientdata(i2c, chip);
-
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Applied "regulator: sy8106a: Get rid of struct sy8106a" to the regulator tree
2019-04-20 3:01 [PATCH] regulator: sy8106a: Get rid of struct sy8106a Axel Lin
2019-04-25 19:24 ` Applied "regulator: sy8106a: Get rid of struct sy8106a" to the regulator tree Mark Brown
@ 2019-04-25 19:26 ` Mark Brown
2019-04-26 9:40 ` Mark Brown
2019-04-26 9:44 ` Mark Brown
3 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-04-25 19:26 UTC (permalink / raw)
To: Axel Lin; +Cc: Icenowy Zheng, Liam Girdwood, linux-kernel, Mark Brown
The patch
regulator: sy8106a: Get rid of struct sy8106a
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From e7599207d7db2fe6a7b2ba3c9a55a06da95b03f0 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 20 Apr 2019 11:01:25 +0800
Subject: [PATCH] regulator: sy8106a: Get rid of struct sy8106a
All the fields in struct sy8106a are only used in sy8106a_i2c_probe(), so
use local variables instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/sy8106a-regulator.c | 40 +++++++++------------------
1 file changed, 13 insertions(+), 27 deletions(-)
diff --git a/drivers/regulator/sy8106a-regulator.c b/drivers/regulator/sy8106a-regulator.c
index 65fbd1f0b612..42e03b2c10a0 100644
--- a/drivers/regulator/sy8106a-regulator.c
+++ b/drivers/regulator/sy8106a-regulator.c
@@ -22,12 +22,6 @@
*/
#define SY8106A_GO_BIT BIT(7)
-struct sy8106a {
- struct regulator_dev *rdev;
- struct regmap *regmap;
- u32 fixed_voltage;
-};
-
static const struct regmap_config sy8106a_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -70,36 +64,32 @@ static const struct regulator_desc sy8106a_reg = {
static int sy8106a_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct sy8106a *chip;
struct device *dev = &i2c->dev;
- struct regulator_dev *rdev = NULL;
+ struct regulator_dev *rdev;
struct regulator_config config = { };
+ struct regmap *regmap;
unsigned int reg, vsel;
+ u32 fixed_voltage;
int error;
- chip = devm_kzalloc(&i2c->dev, sizeof(struct sy8106a), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
error = of_property_read_u32(dev->of_node, "silergy,fixed-microvolt",
- &chip->fixed_voltage);
+ &fixed_voltage);
if (error)
return error;
- if (chip->fixed_voltage < SY8106A_MIN_MV * 1000 ||
- chip->fixed_voltage > SY8106A_MAX_MV * 1000)
+ if (fixed_voltage < SY8106A_MIN_MV * 1000 ||
+ fixed_voltage > SY8106A_MAX_MV * 1000)
return -EINVAL;
- chip->regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
- if (IS_ERR(chip->regmap)) {
- error = PTR_ERR(chip->regmap);
+ regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
+ if (IS_ERR(regmap)) {
+ error = PTR_ERR(regmap);
dev_err(dev, "Failed to allocate register map: %d\n", error);
return error;
}
config.dev = &i2c->dev;
- config.regmap = chip->regmap;
- config.driver_data = chip;
+ config.regmap = regmap;
config.of_node = dev->of_node;
config.init_data = of_get_regulator_init_data(dev, dev->of_node,
@@ -109,15 +99,15 @@ static int sy8106a_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
/* Ensure GO_BIT is enabled when probing */
- error = regmap_read(chip->regmap, SY8106A_REG_VOUT1_SEL, ®);
+ error = regmap_read(regmap, SY8106A_REG_VOUT1_SEL, ®);
if (error)
return error;
if (!(reg & SY8106A_GO_BIT)) {
- vsel = (chip->fixed_voltage / 1000 - SY8106A_MIN_MV) /
+ vsel = (fixed_voltage / 1000 - SY8106A_MIN_MV) /
SY8106A_STEP_MV;
- error = regmap_write(chip->regmap, SY8106A_REG_VOUT1_SEL,
+ error = regmap_write(regmap, SY8106A_REG_VOUT1_SEL,
vsel | SY8106A_GO_BIT);
if (error)
return error;
@@ -131,10 +121,6 @@ static int sy8106a_i2c_probe(struct i2c_client *i2c,
return error;
}
- chip->rdev = rdev;
-
- i2c_set_clientdata(i2c, chip);
-
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Applied "regulator: sy8106a: Get rid of struct sy8106a" to the regulator tree
2019-04-20 3:01 [PATCH] regulator: sy8106a: Get rid of struct sy8106a Axel Lin
2019-04-25 19:24 ` Applied "regulator: sy8106a: Get rid of struct sy8106a" to the regulator tree Mark Brown
2019-04-25 19:26 ` Mark Brown
@ 2019-04-26 9:40 ` Mark Brown
2019-04-26 9:44 ` Mark Brown
3 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-04-26 9:40 UTC (permalink / raw)
To: Axel Lin; +Cc: Icenowy Zheng, Liam Girdwood, linux-kernel, Mark Brown
The patch
regulator: sy8106a: Get rid of struct sy8106a
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 5d7ebba38bafa8f6eba2540e8a36233ea6d6d0dc Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 20 Apr 2019 11:01:25 +0800
Subject: [PATCH] regulator: sy8106a: Get rid of struct sy8106a
All the fields in struct sy8106a are only used in sy8106a_i2c_probe(), so
use local variables instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/sy8106a-regulator.c | 40 +++++++++------------------
1 file changed, 13 insertions(+), 27 deletions(-)
diff --git a/drivers/regulator/sy8106a-regulator.c b/drivers/regulator/sy8106a-regulator.c
index 65fbd1f0b612..42e03b2c10a0 100644
--- a/drivers/regulator/sy8106a-regulator.c
+++ b/drivers/regulator/sy8106a-regulator.c
@@ -22,12 +22,6 @@
*/
#define SY8106A_GO_BIT BIT(7)
-struct sy8106a {
- struct regulator_dev *rdev;
- struct regmap *regmap;
- u32 fixed_voltage;
-};
-
static const struct regmap_config sy8106a_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -70,36 +64,32 @@ static const struct regulator_desc sy8106a_reg = {
static int sy8106a_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct sy8106a *chip;
struct device *dev = &i2c->dev;
- struct regulator_dev *rdev = NULL;
+ struct regulator_dev *rdev;
struct regulator_config config = { };
+ struct regmap *regmap;
unsigned int reg, vsel;
+ u32 fixed_voltage;
int error;
- chip = devm_kzalloc(&i2c->dev, sizeof(struct sy8106a), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
error = of_property_read_u32(dev->of_node, "silergy,fixed-microvolt",
- &chip->fixed_voltage);
+ &fixed_voltage);
if (error)
return error;
- if (chip->fixed_voltage < SY8106A_MIN_MV * 1000 ||
- chip->fixed_voltage > SY8106A_MAX_MV * 1000)
+ if (fixed_voltage < SY8106A_MIN_MV * 1000 ||
+ fixed_voltage > SY8106A_MAX_MV * 1000)
return -EINVAL;
- chip->regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
- if (IS_ERR(chip->regmap)) {
- error = PTR_ERR(chip->regmap);
+ regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
+ if (IS_ERR(regmap)) {
+ error = PTR_ERR(regmap);
dev_err(dev, "Failed to allocate register map: %d\n", error);
return error;
}
config.dev = &i2c->dev;
- config.regmap = chip->regmap;
- config.driver_data = chip;
+ config.regmap = regmap;
config.of_node = dev->of_node;
config.init_data = of_get_regulator_init_data(dev, dev->of_node,
@@ -109,15 +99,15 @@ static int sy8106a_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
/* Ensure GO_BIT is enabled when probing */
- error = regmap_read(chip->regmap, SY8106A_REG_VOUT1_SEL, ®);
+ error = regmap_read(regmap, SY8106A_REG_VOUT1_SEL, ®);
if (error)
return error;
if (!(reg & SY8106A_GO_BIT)) {
- vsel = (chip->fixed_voltage / 1000 - SY8106A_MIN_MV) /
+ vsel = (fixed_voltage / 1000 - SY8106A_MIN_MV) /
SY8106A_STEP_MV;
- error = regmap_write(chip->regmap, SY8106A_REG_VOUT1_SEL,
+ error = regmap_write(regmap, SY8106A_REG_VOUT1_SEL,
vsel | SY8106A_GO_BIT);
if (error)
return error;
@@ -131,10 +121,6 @@ static int sy8106a_i2c_probe(struct i2c_client *i2c,
return error;
}
- chip->rdev = rdev;
-
- i2c_set_clientdata(i2c, chip);
-
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Applied "regulator: sy8106a: Get rid of struct sy8106a" to the regulator tree
2019-04-20 3:01 [PATCH] regulator: sy8106a: Get rid of struct sy8106a Axel Lin
` (2 preceding siblings ...)
2019-04-26 9:40 ` Mark Brown
@ 2019-04-26 9:44 ` Mark Brown
3 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2019-04-26 9:44 UTC (permalink / raw)
To: Axel Lin; +Cc: Icenowy Zheng, Liam Girdwood, linux-kernel, Mark Brown
The patch
regulator: sy8106a: Get rid of struct sy8106a
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 5d7ebba38bafa8f6eba2540e8a36233ea6d6d0dc Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Sat, 20 Apr 2019 11:01:25 +0800
Subject: [PATCH] regulator: sy8106a: Get rid of struct sy8106a
All the fields in struct sy8106a are only used in sy8106a_i2c_probe(), so
use local variables instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/sy8106a-regulator.c | 40 +++++++++------------------
1 file changed, 13 insertions(+), 27 deletions(-)
diff --git a/drivers/regulator/sy8106a-regulator.c b/drivers/regulator/sy8106a-regulator.c
index 65fbd1f0b612..42e03b2c10a0 100644
--- a/drivers/regulator/sy8106a-regulator.c
+++ b/drivers/regulator/sy8106a-regulator.c
@@ -22,12 +22,6 @@
*/
#define SY8106A_GO_BIT BIT(7)
-struct sy8106a {
- struct regulator_dev *rdev;
- struct regmap *regmap;
- u32 fixed_voltage;
-};
-
static const struct regmap_config sy8106a_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -70,36 +64,32 @@ static const struct regulator_desc sy8106a_reg = {
static int sy8106a_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct sy8106a *chip;
struct device *dev = &i2c->dev;
- struct regulator_dev *rdev = NULL;
+ struct regulator_dev *rdev;
struct regulator_config config = { };
+ struct regmap *regmap;
unsigned int reg, vsel;
+ u32 fixed_voltage;
int error;
- chip = devm_kzalloc(&i2c->dev, sizeof(struct sy8106a), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
error = of_property_read_u32(dev->of_node, "silergy,fixed-microvolt",
- &chip->fixed_voltage);
+ &fixed_voltage);
if (error)
return error;
- if (chip->fixed_voltage < SY8106A_MIN_MV * 1000 ||
- chip->fixed_voltage > SY8106A_MAX_MV * 1000)
+ if (fixed_voltage < SY8106A_MIN_MV * 1000 ||
+ fixed_voltage > SY8106A_MAX_MV * 1000)
return -EINVAL;
- chip->regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
- if (IS_ERR(chip->regmap)) {
- error = PTR_ERR(chip->regmap);
+ regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
+ if (IS_ERR(regmap)) {
+ error = PTR_ERR(regmap);
dev_err(dev, "Failed to allocate register map: %d\n", error);
return error;
}
config.dev = &i2c->dev;
- config.regmap = chip->regmap;
- config.driver_data = chip;
+ config.regmap = regmap;
config.of_node = dev->of_node;
config.init_data = of_get_regulator_init_data(dev, dev->of_node,
@@ -109,15 +99,15 @@ static int sy8106a_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
/* Ensure GO_BIT is enabled when probing */
- error = regmap_read(chip->regmap, SY8106A_REG_VOUT1_SEL, ®);
+ error = regmap_read(regmap, SY8106A_REG_VOUT1_SEL, ®);
if (error)
return error;
if (!(reg & SY8106A_GO_BIT)) {
- vsel = (chip->fixed_voltage / 1000 - SY8106A_MIN_MV) /
+ vsel = (fixed_voltage / 1000 - SY8106A_MIN_MV) /
SY8106A_STEP_MV;
- error = regmap_write(chip->regmap, SY8106A_REG_VOUT1_SEL,
+ error = regmap_write(regmap, SY8106A_REG_VOUT1_SEL,
vsel | SY8106A_GO_BIT);
if (error)
return error;
@@ -131,10 +121,6 @@ static int sy8106a_i2c_probe(struct i2c_client *i2c,
return error;
}
- chip->rdev = rdev;
-
- i2c_set_clientdata(i2c, chip);
-
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread