[PATCH AUTOSEL 4.19 01/52] arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay

[PATCH AUTOSEL 4.19 01/52] arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay

[Sasha Levin]

From: "Leonidas P. Papadakos" <papadakospan@gmail.com>

[ Upstream commit 924726888f660b2a86382a5dd051ec9ca1b18190 ]

The rk3328-roc-cc board exhibits tx stability issues with large packets,
as does the rock64 board, which was fixed with this patch
https://patchwork.kernel.org/patch/10178969/

A similar patch was merged for the rk3328-roc-cc here
https://patchwork.kernel.org/patch/10804863/
but it doesn't include the tx/rx_delay tweaks, and I find that they
help with an issue where large transfers would bring the ethernet
link down, causing a link reset regularly.

Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 246c317f6a68..91061d9cf78b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -94,8 +94,8 @@
 	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x25>;
-	rx_delay = <0x11>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
 	status = "okay";
 };
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 02/52] HID: logitech: check the return value of create_singlethread_workqueue

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 6c44b15e1c9076d925d5236ddadf1318b0a25ce2 ]

create_singlethread_workqueue may fail and return NULL. The fix checks if it is
NULL to avoid NULL pointer dereference.  Also, the fix moves the call of
create_singlethread_workqueue earlier to avoid resource-release issues.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 19cc980eebce..8425d3548a41 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -1907,6 +1907,13 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)
 		kfree(data);
 		return -ENOMEM;
 	}
+	data->wq = create_singlethread_workqueue("hidpp-ff-sendqueue");
+	if (!data->wq) {
+		kfree(data->effect_ids);
+		kfree(data);
+		return -ENOMEM;
+	}
+
 	data->hidpp = hidpp;
 	data->feature_index = feature_index;
 	data->version = version;
@@ -1951,7 +1958,6 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)
 	/* ignore boost value at response.fap.params[2] */
 
 	/* init the hardware command queue */
-	data->wq = create_singlethread_workqueue("hidpp-ff-sendqueue");
 	atomic_set(&data->workqueue_size, 0);
 
 	/* initialize with zero autocenter to get wheel in usable state */
-- 
2.19.1

[PATCH AUTOSEL 4.19 03/52] HID: debug: fix race condition with between rdesc_show() and device removal

[Sasha Levin]

From: "He, Bo" <bo.he@intel.com>

[ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ]

There is a race condition that could happen if hid_debug_rdesc_show()
is running while hdev is in the process of going away (device removal,
system suspend, etc) which could result in NULL pointer dereference:

	 BUG: unable to handle kernel paging request at 0000000783316040
	 CPU: 1 PID: 1512 Comm: getevent Tainted: G     U     O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1
	 RIP: 0010:hid_dump_device+0x9b/0x160
	 Call Trace:
	  hid_debug_rdesc_show+0x72/0x1d0
	  seq_read+0xe0/0x410
	  full_proxy_read+0x5f/0x90
	  __vfs_read+0x3a/0x170
	  vfs_read+0xa0/0x150
	  ksys_read+0x58/0xc0
	  __x64_sys_read+0x1a/0x20
	  do_syscall_64+0x55/0x110
	  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Grab driver_input_lock to make sure the input device exists throughout the
whole process of dumping the rdesc.

[jkosina@suse.cz: update changelog a bit]
Signed-off-by: "he, bo" <bo.he@intel.com>
Signed-off-by: "Zhang, Jun" <jun.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-debug.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index ebc9ffde41e9..a353a011fbdf 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -1060,10 +1060,15 @@ static int hid_debug_rdesc_show(struct seq_file *f, void *p)
 	seq_printf(f, "\n\n");
 
 	/* dump parsed data and input mappings */
+	if (down_interruptible(&hdev->driver_input_lock))
+		return 0;
+
 	hid_dump_device(hdev, f);
 	seq_printf(f, "\n");
 	hid_dump_input_mapping(hdev, f);
 
+	up(&hdev->driver_input_lock);
+
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 04/52] rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured

[Sasha Levin]

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit d6752e185c3168771787a02dc6a55f32260943cc ]

If we encounter a failure during suspend where this RTC was programmed
to wakeup the system from suspend, but that wakeup couldn't be
configured because the system didn't support wakeup interrupts, we'll
run into the following warning:

	Unbalanced IRQ 166 wake disable
	WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278

This happens because the suspend process isn't aborted when the RTC
fails to configure the wakeup IRQ. Instead, we continue suspending the
system and then another suspend callback fails the suspend process and
"unwinds" the previously suspended drivers by calling their resume
callbacks. When we get back to resuming this RTC driver, we'll call
disable_irq_wake() on an IRQ that hasn't been configured for wake.

Let's just fail suspend/resume here if we can't configure the system to
wake and the user has chosen to wakeup with this device. This fixes this
warning and makes the code more robust in case there are systems out
there that can't wakeup from suspend on this line but the user has
chosen to do so.

Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Evan Green <evgreen@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-By: Benson Leung <bleung@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-cros-ec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c
index e5444296075e..4d6bf9304ceb 100644
--- a/drivers/rtc/rtc-cros-ec.c
+++ b/drivers/rtc/rtc-cros-ec.c
@@ -298,7 +298,7 @@ static int cros_ec_rtc_suspend(struct device *dev)
 	struct cros_ec_rtc *cros_ec_rtc = dev_get_drvdata(&pdev->dev);
 
 	if (device_may_wakeup(dev))
-		enable_irq_wake(cros_ec_rtc->cros_ec->irq);
+		return enable_irq_wake(cros_ec_rtc->cros_ec->irq);
 
 	return 0;
 }
@@ -309,7 +309,7 @@ static int cros_ec_rtc_resume(struct device *dev)
 	struct cros_ec_rtc *cros_ec_rtc = dev_get_drvdata(&pdev->dev);
 
 	if (device_may_wakeup(dev))
-		disable_irq_wake(cros_ec_rtc->cros_ec->irq);
+		return disable_irq_wake(cros_ec_rtc->cros_ec->irq);
 
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 05/52] rtc: sh: Fix invalid alarm warning for non-enabled alarm

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 15d82d22498784966df8e4696174a16b02cc1052 ]

When no alarm has been programmed on RSK-RZA1, an error message is
printed during boot:

    rtc rtc0: invalid alarm value: 2019-03-14T255:255:255

sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm
field that is not enabled.  __rtc_read_alarm() validates the received
alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and
corrected as considered being out-of-range, this is not the case for the
hour, minute, and second fields, where -1 is expected for missing
fields.

Fix this by returning -1 instead, as this value is handled fine for all
fields.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-sh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 51ba414798a8..3d7414e5ed35 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -377,7 +377,7 @@ static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
 static inline int sh_rtc_read_alarm_value(struct sh_rtc *rtc, int reg_off)
 {
 	unsigned int byte;
-	int value = 0xff;	/* return 0xff for ignored values */
+	int value = -1;			/* return -1 for ignored values */
 
 	byte = readb(rtc->regbase + reg_off);
 	if (byte & AR_ENB) {
-- 
2.19.1

[PATCH AUTOSEL 4.19 06/52] batman-adv: Reduce claim hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 4ba104f468bbfc27362c393815d03aa18fb7a20f ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_bla_del_claim is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bridge_loop_avoidance.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index 5f1aeeded0e3..85faf25c2912 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -803,6 +803,8 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,
 				 const u8 *mac, const unsigned short vid)
 {
 	struct batadv_bla_claim search_claim, *claim;
+	struct batadv_bla_claim *claim_removed_entry;
+	struct hlist_node *claim_removed_node;
 
 	ether_addr_copy(search_claim.addr, mac);
 	search_claim.vid = vid;
@@ -813,10 +815,18 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,
 	batadv_dbg(BATADV_DBG_BLA, bat_priv, "%s(): %pM, vid %d\n", __func__,
 		   mac, batadv_print_vid(vid));
 
-	batadv_hash_remove(bat_priv->bla.claim_hash, batadv_compare_claim,
-			   batadv_choose_claim, claim);
-	batadv_claim_put(claim); /* reference from the hash is gone */
+	claim_removed_node = batadv_hash_remove(bat_priv->bla.claim_hash,
+						batadv_compare_claim,
+						batadv_choose_claim, claim);
+	if (!claim_removed_node)
+		goto free_claim;
 
+	/* reference from the hash is gone */
+	claim_removed_entry = hlist_entry(claim_removed_node,
+					  struct batadv_bla_claim, hash_entry);
+	batadv_claim_put(claim_removed_entry);
+
+free_claim:
 	/* don't need the reference from hash_find() anymore */
 	batadv_claim_put(claim);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 07/52] batman-adv: Reduce tt_local hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 3d65b9accab4a7ed5038f6df403fbd5e298398c7 ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_local_remove is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: ef72706a0543 ("batman-adv: protect tt_local_entry from concurrent delete events")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/translation-table.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index d21624c44665..696e6ddc534b 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -1332,9 +1332,10 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,
 			   unsigned short vid, const char *message,
 			   bool roaming)
 {
+	struct batadv_tt_local_entry *tt_removed_entry;
 	struct batadv_tt_local_entry *tt_local_entry;
 	u16 flags, curr_flags = BATADV_NO_FLAGS;
-	void *tt_entry_exists;
+	struct hlist_node *tt_removed_node;
 
 	tt_local_entry = batadv_tt_local_hash_find(bat_priv, addr, vid);
 	if (!tt_local_entry)
@@ -1363,15 +1364,18 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,
 	 */
 	batadv_tt_local_event(bat_priv, tt_local_entry, BATADV_TT_CLIENT_DEL);
 
-	tt_entry_exists = batadv_hash_remove(bat_priv->tt.local_hash,
+	tt_removed_node = batadv_hash_remove(bat_priv->tt.local_hash,
 					     batadv_compare_tt,
 					     batadv_choose_tt,
 					     &tt_local_entry->common);
-	if (!tt_entry_exists)
+	if (!tt_removed_node)
 		goto out;
 
-	/* extra call to free the local tt entry */
-	batadv_tt_local_entry_put(tt_local_entry);
+	/* drop reference of remove hash entry */
+	tt_removed_entry = hlist_entry(tt_removed_node,
+				       struct batadv_tt_local_entry,
+				       common.hash_entry);
+	batadv_tt_local_entry_put(tt_removed_entry);
 
 out:
 	if (tt_local_entry)
-- 
2.19.1

[PATCH AUTOSEL 4.19 08/52] batman-adv: Reduce tt_global hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit f131a56880d10932931e74773fb8702894a94a75 ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_global_free is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu")
Reported-by: Martin Weinelt <martin@linuxlounge.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/translation-table.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 696e6ddc534b..359ec1a6e822 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -616,14 +616,26 @@ static void batadv_tt_global_free(struct batadv_priv *bat_priv,
 				  struct batadv_tt_global_entry *tt_global,
 				  const char *message)
 {
+	struct batadv_tt_global_entry *tt_removed_entry;
+	struct hlist_node *tt_removed_node;
+
 	batadv_dbg(BATADV_DBG_TT, bat_priv,
 		   "Deleting global tt entry %pM (vid: %d): %s\n",
 		   tt_global->common.addr,
 		   batadv_print_vid(tt_global->common.vid), message);
 
-	batadv_hash_remove(bat_priv->tt.global_hash, batadv_compare_tt,
-			   batadv_choose_tt, &tt_global->common);
-	batadv_tt_global_entry_put(tt_global);
+	tt_removed_node = batadv_hash_remove(bat_priv->tt.global_hash,
+					     batadv_compare_tt,
+					     batadv_choose_tt,
+					     &tt_global->common);
+	if (!tt_removed_node)
+		return;
+
+	/* drop reference of remove hash entry */
+	tt_removed_entry = hlist_entry(tt_removed_node,
+				       struct batadv_tt_global_entry,
+				       common.hash_entry);
+	batadv_tt_global_entry_put(tt_removed_entry);
 }
 
 /**
-- 
2.19.1

[PATCH AUTOSEL 4.19 09/52] batman-adv: fix warning in function batadv_v_elp_get_throughput

[Sasha Levin]

From: Anders Roxell <anders.roxell@linaro.org>

[ Upstream commit ca8c3b922e7032aff6cc3fd05548f4df1f3df90e ]

When CONFIG_CFG80211 isn't enabled the compiler correcly warns about
'sinfo.pertid' may be unused. It can also happen for other error
conditions that it not warn about.

net/batman-adv/bat_v_elp.c: In function ‘batadv_v_elp_get_throughput.isra.0’:
include/net/cfg80211.h:6370:13: warning: ‘sinfo.pertid’ may be used
 uninitialized in this function [-Wmaybe-uninitialized]
  kfree(sinfo->pertid);
        ~~~~~^~~~~~~~

Rework so that we only release '&sinfo' if cfg80211_get_station returns
zero.

Fixes: 7d652669b61d ("batman-adv: release station info tidstats")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_elp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index ef0dec20c7d8..5da183b2f4c9 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -104,8 +104,10 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 
 		ret = cfg80211_get_station(real_netdev, neigh->addr, &sinfo);
 
-		/* free the TID stats immediately */
-		cfg80211_sinfo_release_content(&sinfo);
+		if (!ret) {
+			/* free the TID stats immediately */
+			cfg80211_sinfo_release_content(&sinfo);
+		}
 
 		dev_put(real_netdev);
 		if (ret == -ENOENT) {
-- 
2.19.1

[PATCH AUTOSEL 4.19 10/52] ARM: dts: rockchip: Fix gpu opp node names for rk3288

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit d040e4e8deeaa8257d6aa260e29ad69832b5d630 ]

The device tree compiler yells like this:
  Warning (unit_address_vs_reg):
  /gpu-opp-table/opp@100000000:
  node has a unit name, but no reg property

Let's match the cpu opp node names and use a dash.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index e6a36a792bae..c706adf4aed2 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1261,27 +1261,27 @@
 	gpu_opp_table: gpu-opp-table {
 		compatible = "operating-points-v2";
 
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 			opp-microvolt = <950000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <950000>;
 		};
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1000000>;
 		};
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp@500000000 {
+		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1200000>;
 		};
-		opp@600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1250000>;
 		};
-- 
2.19.1

[PATCH AUTOSEL 4.19 11/52] reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev

[Sasha Levin]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit 13e8a05b922457761ddef39cfff6231bd4ed9eef ]

Set .owner to prevent module unloading while being used.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Fixes: d903779b58be ("reset: meson: add meson audio arb driver")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/reset-meson-audio-arb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/reset/reset-meson-audio-arb.c b/drivers/reset/reset-meson-audio-arb.c
index 91751617b37a..c53a2185a039 100644
--- a/drivers/reset/reset-meson-audio-arb.c
+++ b/drivers/reset/reset-meson-audio-arb.c
@@ -130,6 +130,7 @@ static int meson_audio_arb_probe(struct platform_device *pdev)
 	arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits);
 	arb->rstc.ops = &meson_audio_arb_rstc_ops;
 	arb->rstc.of_node = dev->of_node;
+	arb->rstc.owner = THIS_MODULE;
 
 	/*
 	 * Enable general :
-- 
2.19.1

[PATCH AUTOSEL 4.19 12/52] igb: Fix WARN_ONCE on runtime suspend

[Sasha Levin]

From: Arvind Sankar <niveditas98@gmail.com>

[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]

The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc566
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.

Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.

Also move a couple of defines into the appropriate header file instead
of inline in the .c file.

Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <niveditas98@gmail.com>
Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/igb/e1000_defines.h    |  2 +
 drivers/net/ethernet/intel/igb/igb_main.c     | 57 +++----------------
 2 files changed, 10 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 8a28f3388f69..dca671591ef6 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -194,6 +194,8 @@
 /* enable link status from external LINK_0 and LINK_1 pins */
 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000  /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
 #define E1000_CTRL_SDP0_DIR 0x00400000  /* SDP0 Data direction */
 #define E1000_CTRL_SDP1_DIR 0x00800000  /* SDP1 Data direction */
 #define E1000_CTRL_RST      0x04000000  /* Global reset */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ffaa6e031632..aa39a068858e 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8754,9 +8754,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl, rctl, status;
 	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
-#ifdef CONFIG_PM
-	int retval = 0;
-#endif
+	bool wake;
 
 	rtnl_lock();
 	netif_device_detach(netdev);
@@ -8769,14 +8767,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	igb_clear_interrupt_scheme(adapter);
 	rtnl_unlock();
 
-#ifdef CONFIG_PM
-	if (!runtime) {
-		retval = pci_save_state(pdev);
-		if (retval)
-			return retval;
-	}
-#endif
-
 	status = rd32(E1000_STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -8793,10 +8783,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		}
 
 		ctrl = rd32(E1000_CTRL);
-		/* advertise wake from D3Cold */
-		#define E1000_CTRL_ADVD3WUC 0x00100000
-		/* phy power management enable */
-		#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
 		ctrl |= E1000_CTRL_ADVD3WUC;
 		wr32(E1000_CTRL, ctrl);
 
@@ -8810,12 +8796,15 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		wr32(E1000_WUFC, 0);
 	}
 
-	*enable_wake = wufc || adapter->en_mng_pt;
-	if (!*enable_wake)
+	wake = wufc || adapter->en_mng_pt;
+	if (!wake)
 		igb_power_down_link(adapter);
 	else
 		igb_power_up_link(adapter);
 
+	if (enable_wake)
+		*enable_wake = wake;
+
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
@@ -8858,22 +8847,7 @@ static void igb_deliver_wake_packet(struct net_device *netdev)
 
 static int __maybe_unused igb_suspend(struct device *dev)
 {
-	int retval;
-	bool wake;
-	struct pci_dev *pdev = to_pci_dev(dev);
-
-	retval = __igb_shutdown(pdev, &wake, 0);
-	if (retval)
-		return retval;
-
-	if (wake) {
-		pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		pci_set_power_state(pdev, PCI_D3hot);
-	}
-
-	return 0;
+	return __igb_shutdown(to_pci_dev(dev), NULL, 0);
 }
 
 static int __maybe_unused igb_resume(struct device *dev)
@@ -8944,22 +8918,7 @@ static int __maybe_unused igb_runtime_idle(struct device *dev)
 
 static int __maybe_unused igb_runtime_suspend(struct device *dev)
 {
-	struct pci_dev *pdev = to_pci_dev(dev);
-	int retval;
-	bool wake;
-
-	retval = __igb_shutdown(pdev, &wake, 1);
-	if (retval)
-		return retval;
-
-	if (wake) {
-		pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		pci_set_power_state(pdev, PCI_D3hot);
-	}
-
-	return 0;
+	return __igb_shutdown(to_pci_dev(dev), NULL, 1);
 }
 
 static int __maybe_unused igb_runtime_resume(struct device *dev)
-- 
2.19.1

[PATCH AUTOSEL 4.19 13/52] fm10k: Fix a potential NULL pointer dereference

[Sasha Levin]

From: Yue Haibing <yuehaibing@huawei.com>

[ Upstream commit 01ca667133d019edc9f0a1f70a272447c84ec41f ]

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573
Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00
RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001
R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001
FS:  00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211
 __mutex_lock_common kernel/locking/mutex.c:925 [inline]
 __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072
 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934
 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc
R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff

If alloc_workqueue fails, it should return -ENOMEM, otherwise may
trigger this NULL pointer dereference while unloading drivers.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0a38c17a21a0 ("fm10k: Remove create_workqueue")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/fm10k/fm10k_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
index 3f536541f45f..78a43d688cb1 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
@@ -41,6 +41,8 @@ static int __init fm10k_init_module(void)
 	/* create driver workqueue */
 	fm10k_workqueue = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
 					  fm10k_driver_name);
+	if (!fm10k_workqueue)
+		return -ENOMEM;
 
 	fm10k_dbg_init();
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 14/52] riscv: fix accessing 8-byte variable from RV32

[Sasha Levin]

From: Alan Kao <alankao@andestech.com>

[ Upstream commit dbee9c9c45846f003ec2f819710c2f4835630a6a ]

A memory save operation to 8-byte variable in RV32 is divided into
two sw instructions in the put_user macro.  The current fixup returns
execution flow to the second sw instead of the one after it.

This patch fixes this fixup code according to the load access part.

Signed-off-by: Alan Kao<alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/uaccess.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h
index 8c3e3e3c8be1..f0ea3156192d 100644
--- a/arch/riscv/include/asm/uaccess.h
+++ b/arch/riscv/include/asm/uaccess.h
@@ -307,7 +307,7 @@ do {								\
 		"	.balign 4\n"				\
 		"4:\n"						\
 		"	li %0, %6\n"				\
-		"	jump 2b, %1\n"				\
+		"	jump 3b, %1\n"				\
 		"	.previous\n"				\
 		"	.section __ex_table,\"a\"\n"		\
 		"	.balign " RISCV_SZPTR "\n"			\
-- 
2.19.1

[PATCH AUTOSEL 4.19 15/52] HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630

[Sasha Levin]

From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>

[ Upstream commit 2bafa1e9625400bec4c840a168d70ba52607a58d ]

Similar to commit edfc3722cfef ("HID: quirks: Fix keyboard + touchpad on
Toshiba Click Mini not working"), the Lenovo Miix 630 has a combo
keyboard/touchpad device with vid:pid of 04F3:0400, which is shared with
Elan touchpads.  The combo on the Miix 630 has an ACPI id of QTEC0001,
which is not claimed by the elan_i2c driver, so key on that similar to
what was done for the Toshiba Click Mini.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-quirks.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 94088c0ed68a..e24790c988c0 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -744,7 +744,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DEALEXTREAME, USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0400) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
@@ -1025,6 +1024,10 @@ bool hid_ignore(struct hid_device *hdev)
 		if (hdev->product == 0x0401 &&
 		    strncmp(hdev->name, "ELAN0800", 8) != 0)
 			return true;
+		/* Same with product id 0x0400 */
+		if (hdev->product == 0x0400 &&
+		    strncmp(hdev->name, "QTEC0001", 8) != 0)
+			return true;
 		break;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 16/52] net: hns3: fix compile error

[Sasha Levin]

From: Xi Wang <wangxi11@huawei.com>

[ Upstream commit 669efc76b317b3aa550ffbf0b79d064cb00a5f96 ]

Currently, the rules for configuring search paths in Kbuild have
changed, this will lead some erros when compiling hns3 with the
following command:

make O=DIR M=drivers/net/ethernet/hisilicon/hns3

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10:
fatal error: hnae3.h: No such file or directory

This patch fix it by adding $(srctree)/ prefix to the serach paths.

Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile | 2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
index cb8ddd043476..d278fc7ea3ed 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the HISILICON network device drivers.
 #
 
-ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
+ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
 
 obj-$(CONFIG_HNS3_HCLGE) += hclge.o
 hclge-objs = hclge_main.o hclge_cmd.o hclge_mdio.o hclge_tm.o hclge_mbx.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
index fb93bbd35845..6193f8fa7cf3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the HISILICON network device drivers.
 #
 
-ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3
+ccflags-y := -I $(srctree)/drivers/net/ethernet/hisilicon/hns3
 
 obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o
 hclgevf-objs = hclgevf_main.o hclgevf_cmd.o hclgevf_mbx.o
\ No newline at end of file
-- 
2.19.1

[PATCH AUTOSEL 4.19 17/52] net/mlx5: E-Switch, Fix esw manager vport indication for more vport commands

[Sasha Levin]

From: Omri Kahalon <omrik@mellanox.com>

[ Upstream commit eca4a928585ac08147e5cc8e2111ecbc6279ee31 ]

Traditionally, the PF (Physical Function) which resides on vport 0 was
the E-switch manager. Since the ECPF (Embedded CPU Physical Function),
which resides on vport 0xfffe, was introduced as the E-Switch manager,
the assumption that the E-switch manager is on vport 0 is incorrect.

Since the eswitch code already uses the actual vport value, all we
need is to always set other_vport=1.

Signed-off-by: Omri Kahalon <omrik@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 26c9f9421901..55ccd90beeb0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -80,8 +80,7 @@ static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport,
 		 opcode, MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 	MLX5_SET(modify_nic_vport_context_in, in, field_select.change_event, 1);
 	MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport);
-	if (vport)
-		MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
+	MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
 	nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in,
 				     in, nic_vport_context);
 
@@ -109,8 +108,7 @@ static int modify_esw_vport_context_cmd(struct mlx5_core_dev *dev, u16 vport,
 	MLX5_SET(modify_esw_vport_context_in, in, opcode,
 		 MLX5_CMD_OP_MODIFY_ESW_VPORT_CONTEXT);
 	MLX5_SET(modify_esw_vport_context_in, in, vport_number, vport);
-	if (vport)
-		MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1);
+	MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1);
 	return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 18/52] bonding: show full hw address in sysfs for slave entries

[Sasha Levin]

From: Konstantin Khorenko <khorenko@virtuozzo.com>

[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ]

Bond expects ethernet hwaddr for its slave, but it can be longer than 6
bytes - infiniband interface for example.

 # cat /sys/devices/<skipped>/net/ib0/address
 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1

 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr
 80:00:02:08:fe:80

So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well.

Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_sysfs_slave.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index 2f120b2ffef0..4985268e2273 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -55,7 +55,9 @@ static SLAVE_ATTR_RO(link_failure_count);
 
 static ssize_t perm_hwaddr_show(struct slave *slave, char *buf)
 {
-	return sprintf(buf, "%pM\n", slave->perm_hwaddr);
+	return sprintf(buf, "%*phC\n",
+		       slave->dev->addr_len,
+		       slave->perm_hwaddr);
 }
 static SLAVE_ATTR_RO(perm_hwaddr);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 19/52] net: stmmac: use correct DMA buffer size in the RX descriptor

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 583e6361414903c5206258a30e5bd88cb03c0254 ]

We always program the maximum DMA buffer size into the receive descriptor,
although the allocated size may be less. E.g. with the default MTU size
we allocate only 1536 bytes. If somebody sends us a bigger frame, then
memory may get corrupted.

Fix by using exact buffer sizes.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/descs_com.h   | 22 ++++++++++++-------
 .../ethernet/stmicro/stmmac/dwmac4_descs.c    |  2 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_descs.c  |  2 +-
 .../net/ethernet/stmicro/stmmac/enh_desc.c    | 10 ++++++---
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  2 +-
 .../net/ethernet/stmicro/stmmac/norm_desc.c   | 10 ++++++---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  6 +++--
 7 files changed, 35 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
index 40d6356a7e73..3dfb07a78952 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
@@ -29,11 +29,13 @@
 /* Specific functions used for Ring mode */
 
 /* Enhanced descriptors */
-static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end)
+static inline void ehn_desc_rx_set_on_ring(struct dma_desc *p, int end,
+					   int bfsize)
 {
-	p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
-			<< ERDES1_BUFFER2_SIZE_SHIFT)
-		   & ERDES1_BUFFER2_SIZE_MASK);
+	if (bfsize == BUF_SIZE_16KiB)
+		p->des1 |= cpu_to_le32((BUF_SIZE_8KiB
+				<< ERDES1_BUFFER2_SIZE_SHIFT)
+			   & ERDES1_BUFFER2_SIZE_MASK);
 
 	if (end)
 		p->des1 |= cpu_to_le32(ERDES1_END_RING);
@@ -59,11 +61,15 @@ static inline void enh_set_tx_desc_len_on_ring(struct dma_desc *p, int len)
 }
 
 /* Normal descriptors */
-static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end)
+static inline void ndesc_rx_set_on_ring(struct dma_desc *p, int end, int bfsize)
 {
-	p->des1 |= cpu_to_le32(((BUF_SIZE_2KiB - 1)
-				<< RDES1_BUFFER2_SIZE_SHIFT)
-		    & RDES1_BUFFER2_SIZE_MASK);
+	if (bfsize >= BUF_SIZE_2KiB) {
+		int bfsize2;
+
+		bfsize2 = min(bfsize - BUF_SIZE_2KiB + 1, BUF_SIZE_2KiB - 1);
+		p->des1 |= cpu_to_le32((bfsize2 << RDES1_BUFFER2_SIZE_SHIFT)
+			    & RDES1_BUFFER2_SIZE_MASK);
+	}
 
 	if (end)
 		p->des1 |= cpu_to_le32(RDES1_END_RING);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index 736e29635b77..313a58b68fee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -296,7 +296,7 @@ static int dwmac4_wrback_get_rx_timestamp_status(void *desc, void *next_desc,
 }
 
 static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
-				   int mode, int end)
+				   int mode, int end, int bfsize)
 {
 	dwmac4_set_rx_owner(p, disable_rx_ic);
 }
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
index 1d858fdec997..98fa471da7c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
@@ -123,7 +123,7 @@ static int dwxgmac2_get_rx_timestamp_status(void *desc, void *next_desc,
 }
 
 static void dwxgmac2_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
-				  int mode, int end)
+				  int mode, int end, int bfsize)
 {
 	dwxgmac2_set_rx_owner(p, disable_rx_ic);
 }
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index 5ef91a790f9d..e8855e6adb48 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -259,15 +259,19 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 }
 
 static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
-				  int mode, int end)
+				  int mode, int end, int bfsize)
 {
+	int bfsize1;
+
 	p->des0 |= cpu_to_le32(RDES0_OWN);
-	p->des1 |= cpu_to_le32(BUF_SIZE_8KiB & ERDES1_BUFFER1_SIZE_MASK);
+
+	bfsize1 = min(bfsize, BUF_SIZE_8KiB);
+	p->des1 |= cpu_to_le32(bfsize1 & ERDES1_BUFFER1_SIZE_MASK);
 
 	if (mode == STMMAC_CHAIN_MODE)
 		ehn_desc_rx_set_on_chain(p);
 	else
-		ehn_desc_rx_set_on_ring(p, end);
+		ehn_desc_rx_set_on_ring(p, end, bfsize);
 
 	if (disable_rx_ic)
 		p->des1 |= cpu_to_le32(ERDES1_DISABLE_IC);
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 92b8944f26e3..5bb00234d961 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -33,7 +33,7 @@ struct dma_extended_desc;
 struct stmmac_desc_ops {
 	/* DMA RX descriptor ring initialization */
 	void (*init_rx_desc)(struct dma_desc *p, int disable_rx_ic, int mode,
-			int end);
+			int end, int bfsize);
 	/* DMA TX descriptor ring initialization */
 	void (*init_tx_desc)(struct dma_desc *p, int mode, int end);
 	/* Invoked by the xmit function to prepare the tx descriptor */
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index de65bb29feba..c55a9815b394 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -135,15 +135,19 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 }
 
 static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode,
-			       int end)
+			       int end, int bfsize)
 {
+	int bfsize1;
+
 	p->des0 |= cpu_to_le32(RDES0_OWN);
-	p->des1 |= cpu_to_le32((BUF_SIZE_2KiB - 1) & RDES1_BUFFER1_SIZE_MASK);
+
+	bfsize1 = min(bfsize, BUF_SIZE_2KiB - 1);
+	p->des1 |= cpu_to_le32(bfsize & RDES1_BUFFER1_SIZE_MASK);
 
 	if (mode == STMMAC_CHAIN_MODE)
 		ndesc_rx_set_on_chain(p, end);
 	else
-		ndesc_rx_set_on_ring(p, end);
+		ndesc_rx_set_on_ring(p, end, bfsize);
 
 	if (disable_rx_ic)
 		p->des1 |= cpu_to_le32(RDES1_DISABLE_IC);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 886176be818e..9f766b74b1bc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1111,11 +1111,13 @@ static void stmmac_clear_rx_descriptors(struct stmmac_priv *priv, u32 queue)
 		if (priv->extend_desc)
 			stmmac_init_rx_desc(priv, &rx_q->dma_erx[i].basic,
 					priv->use_riwt, priv->mode,
-					(i == DMA_RX_SIZE - 1));
+					(i == DMA_RX_SIZE - 1),
+					priv->dma_buf_sz);
 		else
 			stmmac_init_rx_desc(priv, &rx_q->dma_rx[i],
 					priv->use_riwt, priv->mode,
-					(i == DMA_RX_SIZE - 1));
+					(i == DMA_RX_SIZE - 1),
+					priv->dma_buf_sz);
 }
 
 /**
-- 
2.19.1

[PATCH AUTOSEL 4.19 20/52] net: stmmac: ratelimit RX error logs

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 972c9be784e077bc56472c78243e0326e525b689 ]

Ratelimit RX error logs.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9f766b74b1bc..138ef4117f71 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3412,9 +3412,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			 *  ignored
 			 */
 			if (frame_len > priv->dma_buf_sz) {
-				netdev_err(priv->dev,
-					   "len %d larger than size (%d)\n",
-					   frame_len, priv->dma_buf_sz);
+				if (net_ratelimit())
+					netdev_err(priv->dev,
+						   "len %d larger than size (%d)\n",
+						   frame_len, priv->dma_buf_sz);
 				priv->dev->stats.rx_length_errors++;
 				break;
 			}
@@ -3471,9 +3472,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			} else {
 				skb = rx_q->rx_skbuff[entry];
 				if (unlikely(!skb)) {
-					netdev_err(priv->dev,
-						   "%s: Inconsistent Rx chain\n",
-						   priv->dev->name);
+					if (net_ratelimit())
+						netdev_err(priv->dev,
+							   "%s: Inconsistent Rx chain\n",
+							   priv->dev->name);
 					priv->dev->stats.rx_dropped++;
 					break;
 				}
-- 
2.19.1

[PATCH AUTOSEL 4.19 21/52] net: stmmac: don't stop NAPI processing when dropping a packet

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 07b3975352374c3f5ebb4a42ef0b253fe370542d ]

Currently, if we drop a packet, we exit from NAPI loop before the budget
is consumed. In some situations this will make the RX processing stall
e.g. when flood pinging the system with oversized packets, as the
errorneous packets are not dropped efficiently.

If we drop a packet, we should just continue to the next one as long as
the budget allows.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 138ef4117f71..a8d7455d0beb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3333,9 +3333,8 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 {
 	struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
 	struct stmmac_channel *ch = &priv->channel[queue];
-	unsigned int entry = rx_q->cur_rx;
+	unsigned int next_entry = rx_q->cur_rx;
 	int coe = priv->hw->rx_csum;
-	unsigned int next_entry;
 	unsigned int count = 0;
 	bool xmac;
 
@@ -3353,10 +3352,12 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 		stmmac_display_ring(priv, rx_head, DMA_RX_SIZE, true);
 	}
 	while (count < limit) {
-		int status;
+		int entry, status;
 		struct dma_desc *p;
 		struct dma_desc *np;
 
+		entry = next_entry;
+
 		if (priv->extend_desc)
 			p = (struct dma_desc *)(rx_q->dma_erx + entry);
 		else
@@ -3417,7 +3418,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 						   "len %d larger than size (%d)\n",
 						   frame_len, priv->dma_buf_sz);
 				priv->dev->stats.rx_length_errors++;
-				break;
+				continue;
 			}
 
 			/* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
@@ -3452,7 +3453,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 						dev_warn(priv->device,
 							 "packet dropped\n");
 					priv->dev->stats.rx_dropped++;
-					break;
+					continue;
 				}
 
 				dma_sync_single_for_cpu(priv->device,
@@ -3477,7 +3478,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 							   "%s: Inconsistent Rx chain\n",
 							   priv->dev->name);
 					priv->dev->stats.rx_dropped++;
-					break;
+					continue;
 				}
 				prefetch(skb->data - NET_IP_ALIGN);
 				rx_q->rx_skbuff[entry] = NULL;
@@ -3512,7 +3513,6 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			priv->dev->stats.rx_packets++;
 			priv->dev->stats.rx_bytes += frame_len;
 		}
-		entry = next_entry;
 	}
 
 	stmmac_rx_refill(priv, queue);
-- 
2.19.1

[PATCH AUTOSEL 4.19 22/52] net: stmmac: don't overwrite discard_frame status

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 1b746ce8b397e58f9e40ce5c63b7198de6930482 ]

If we have error bits set, the discard_frame status will get overwritten
by checksum bit checks, which might set the status back to good one.
Fix by checking the COE status only if the frame is good.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index e8855e6adb48..c42ef6c729c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -231,9 +231,10 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 	 * It doesn't match with the information reported into the databook.
 	 * At any rate, we need to understand if the CSUM hw computation is ok
 	 * and report this info to the upper layers. */
-	ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
-				 !!(rdes0 & RDES0_FRAME_TYPE),
-				 !!(rdes0 & ERDES0_RX_MAC_ADDR));
+	if (likely(ret == good_frame))
+		ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
+					 !!(rdes0 & RDES0_FRAME_TYPE),
+					 !!(rdes0 & ERDES0_RX_MAC_ADDR));
 
 	if (unlikely(rdes0 & RDES0_DRIBBLING))
 		x->dribbling_bit++;
-- 
2.19.1

[PATCH AUTOSEL 4.19 23/52] net: stmmac: fix dropping of multi-descriptor RX frames

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 8ac0c24fe1c256af6644caf3d311029440ec2fbd ]

Packets without the last descriptor set should be dropped early. If we
receive a frame larger than the DMA buffer, the HW will continue using the
next descriptor. Driver mistakes these as individual frames, and sometimes
a truncated frame (without the LD set) may look like a valid packet.

This fixes a strange issue where the system replies to 4098-byte ping
although the MTU/DMA buffer size is set to 4096, and yet at the same
time it's logging an oversized packet.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index c42ef6c729c0..5202d6ad7919 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -201,6 +201,11 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 	if (unlikely(rdes0 & RDES0_OWN))
 		return dma_own;
 
+	if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) {
+		stats->rx_length_errors++;
+		return discard_frame;
+	}
+
 	if (unlikely(rdes0 & RDES0_ERROR_SUMMARY)) {
 		if (unlikely(rdes0 & RDES0_DESCRIPTOR_ERROR)) {
 			x->rx_desc++;
-- 
2.19.1

[PATCH AUTOSEL 4.19 24/52] net: stmmac: don't log oversized frames

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 057a0c5642a2ff2db7c421cdcde34294a23bf37b ]

This is log is harmful as it can trigger multiple times per packet. Delete
it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index c55a9815b394..b7dd4e3c760d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -91,8 +91,6 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 		return dma_own;
 
 	if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) {
-		pr_warn("%s: Oversized frame spanned multiple buffers\n",
-			__func__);
 		stats->rx_length_errors++;
 		return discard_frame;
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.19 25/52] jffs2: fix use-after-free on symlink traversal

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 4fdcfab5b5537c21891e22e65996d4d0dd8ab4ca ]

free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jffs2/readinode.c | 5 -----
 fs/jffs2/super.c     | 5 ++++-
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 389ea53ea487..bccfc40b3a74 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -1414,11 +1414,6 @@ void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)
 
 	jffs2_kill_fragtree(&f->fragtree, deleted?c:NULL);
 
-	if (f->target) {
-		kfree(f->target);
-		f->target = NULL;
-	}
-
 	fds = f->dents;
 	while(fds) {
 		fd = fds;
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index bb6ae387469f..05d892c79339 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -47,7 +47,10 @@ static struct inode *jffs2_alloc_inode(struct super_block *sb)
 static void jffs2_i_callback(struct rcu_head *head)
 {
 	struct inode *inode = container_of(head, struct inode, i_rcu);
-	kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode));
+	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+
+	kfree(f->target);
+	kmem_cache_free(jffs2_inode_cachep, f);
 }
 
 static void jffs2_destroy_inode(struct inode *inode)
-- 
2.19.1

[PATCH AUTOSEL 4.19 26/52] debugfs: fix use-after-free on symlink traversal

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 93b919da64c15b90953f96a536e5e61df896ca57 ]

symlink body shouldn't be freed without an RCU delay.  Switch debugfs to
->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.  Similar to solution for bpf, only here it's even
more obvious that ->evict_inode() can be dropped.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/debugfs/inode.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 41ef452c1fcf..e5126fad57c5 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -163,19 +163,24 @@ static int debugfs_show_options(struct seq_file *m, struct dentry *root)
 	return 0;
 }
 
-static void debugfs_evict_inode(struct inode *inode)
+static void debugfs_i_callback(struct rcu_head *head)
 {
-	truncate_inode_pages_final(&inode->i_data);
-	clear_inode(inode);
+	struct inode *inode = container_of(head, struct inode, i_rcu);
 	if (S_ISLNK(inode->i_mode))
 		kfree(inode->i_link);
+	free_inode_nonrcu(inode);
+}
+
+static void debugfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, debugfs_i_callback);
 }
 
 static const struct super_operations debugfs_super_operations = {
 	.statfs		= simple_statfs,
 	.remount_fs	= debugfs_remount,
 	.show_options	= debugfs_show_options,
-	.evict_inode	= debugfs_evict_inode,
+	.destroy_inode	= debugfs_destroy_inode,
 };
 
 static void debugfs_release_dentry(struct dentry *dentry)
-- 
2.19.1

[PATCH AUTOSEL 4.19 27/52] mfd: twl-core: Disable IRQ while suspended

[Sasha Levin]

From: Andreas Kemnade <andreas@kemnade.info>

[ Upstream commit 20bb907f7dc82ecc9e135ad7067ac7eb69c81222 ]

Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
in i2c-omap.c returns -EACCES.

[   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
[   86.555572] Disabling non-boot CPUs ...
[   86.555664] Successfully put all powerdomains to target state
[   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563751] twl4030: I2C error -13 reading PIH ISR
[   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563812] twl4030: I2C error -13 reading PIH ISR
[   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
[   86.563903] twl4030: I2C error -13 reading PIH ISR

This happens when we wakeup via something behing twl4030 (powerbutton or rtc
alarm). This goes on for minutes until the system is finally resumed.
Disable the irq on suspend and enable it on resume to avoid
having i2c access problems when the irq registers are checked.

Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/twl-core.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 299016bc46d9..104477b512a2 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1245,6 +1245,28 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	return status;
 }
 
+static int __maybe_unused twl_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq)
+		disable_irq(client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused twl_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq)
+		enable_irq(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume);
+
 static const struct i2c_device_id twl_ids[] = {
 	{ "twl4030", TWL4030_VAUX2 },	/* "Triton 2" */
 	{ "twl5030", 0 },		/* T2 updated */
@@ -1262,6 +1284,7 @@ static const struct i2c_device_id twl_ids[] = {
 /* One Client Driver , 4 Clients */
 static struct i2c_driver twl_driver = {
 	.driver.name	= DRIVER_NAME,
+	.driver.pm	= &twl_dev_pm_ops,
 	.id_table	= twl_ids,
 	.probe		= twl_probe,
 	.remove		= twl_remove,
-- 
2.19.1

[PATCH AUTOSEL 4.19 28/52] block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx

[Sasha Levin]

From: Shenghui Wang <shhuiw@foxmail.com>

[ Upstream commit b9a1ff504b9492ad6beb7d5606e0e3365d4d8499 ]

kfree() can leak the hctx->fq->flush_rq field.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 7d53f2314d7c..414656796ecf 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2236,7 +2236,7 @@ static int blk_mq_init_hctx(struct request_queue *q,
 	return 0;
 
  free_fq:
-	kfree(hctx->fq);
+	blk_free_flush_queue(hctx->fq);
  exit_hctx:
 	if (set->ops->exit_hctx)
 		set->ops->exit_hctx(hctx, hctx_idx);
-- 
2.19.1

[PATCH AUTOSEL 4.19 29/52] rtc: da9063: set uie_unsupported when relevant

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 882c5e552ffd06856de42261460f46e18319d259 ]

The DA9063AD doesn't support alarms on any seconds and its granularity is
the minute. Set uie_unsupported in that case.

Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-da9063.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index b4e054c64bad..69b54e5556c0 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -480,6 +480,13 @@ static int da9063_rtc_probe(struct platform_device *pdev)
 	da9063_data_to_tm(data, &rtc->alarm_time, rtc);
 	rtc->rtc_sync = false;
 
+	/*
+	 * TODO: some models have alarms on a minute boundary but still support
+	 * real hardware interrupts. Add this once the core supports it.
+	 */
+	if (config->rtc_data_start != RTC_SEC)
+		rtc->rtc_dev->uie_unsupported = 1;
+
 	irq_alarm = platform_get_irq_byname(pdev, "ALARM");
 	ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL,
 					da9063_alarm_event,
-- 
2.19.1

[PATCH AUTOSEL 4.19 30/52] HID: input: add mapping for Assistant key

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit ce856634af8cda3490947df8ac1ef5843e6356af ]

According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index a3916e58dbf5..e649940e065d 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -982,6 +982,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x1b8: map_key_clear(KEY_VIDEO);		break;
 		case 0x1bc: map_key_clear(KEY_MESSENGER);	break;
 		case 0x1bd: map_key_clear(KEY_INFO);		break;
+		case 0x1cb: map_key_clear(KEY_ASSISTANT);	break;
 		case 0x201: map_key_clear(KEY_NEW);		break;
 		case 0x202: map_key_clear(KEY_OPEN);		break;
 		case 0x203: map_key_clear(KEY_CLOSE);		break;
-- 
2.19.1

[PATCH AUTOSEL 4.19 31/52] vfio/pci: use correct format characters

[Sasha Levin]

From: Louis Taylor <louis@kragniz.eu>

[ Upstream commit 426b046b748d1f47e096e05bdcc6fb4172791307 ]

When compiling with -Wformat, clang emits the following warnings:

drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                ^~~~~~

drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                        ^~~~~~

drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                                ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                                           ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                ^~~~~~

drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                        ^~~~~~

drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                                ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                                           ^~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for unsigned ints.

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index cddb453a1ba5..6cf00d9f512b 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -1443,11 +1443,11 @@ static void __init vfio_pci_fill_ids(void)
 		rc = pci_add_dynid(&vfio_pci_driver, vendor, device,
 				   subvendor, subdevice, class, class_mask, 0);
 		if (rc)
-			pr_warn("failed to add dynamic id [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x (%d)\n",
+			pr_warn("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n",
 				vendor, device, subvendor, subdevice,
 				class, class_mask, rc);
 		else
-			pr_info("add [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x\n",
+			pr_info("add [%04x:%04x[%04x:%04x]] class %#08x/%08x\n",
 				vendor, device, subvendor, subdevice,
 				class, class_mask);
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.19 32/52] vfio/type1: Limit DMA mappings per container

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 492855939bdb59c6f947b0b5b44af9ad82b7e38c ]

Memory backed DMA mappings are accounted against a user's locked
memory limit, including multiple mappings of the same memory.  This
accounting bounds the number of such mappings that a user can create.
However, DMA mappings that are not backed by memory, such as DMA
mappings of device MMIO via mmaps, do not make use of page pinning
and therefore do not count against the user's locked memory limit.
These mappings still consume memory, but the memory is not well
associated to the process for the purpose of oom killing a task.

To add bounding on this use case, we introduce a limit to the total
number of concurrent DMA mappings that a user is allowed to create.
This limit is exposed as a tunable module option where the default
value of 64K is expected to be well in excess of any reasonable use
case (a large virtual machine configuration would typically only make
use of tens of concurrent mappings).

This fixes CVE-2019-3882.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio_iommu_type1.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index 64cbc2d007c9..c36275754086 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -58,12 +58,18 @@ module_param_named(disable_hugepages,
 MODULE_PARM_DESC(disable_hugepages,
 		 "Disable VFIO IOMMU support for IOMMU hugepages.");
 
+static unsigned int dma_entry_limit __read_mostly = U16_MAX;
+module_param_named(dma_entry_limit, dma_entry_limit, uint, 0644);
+MODULE_PARM_DESC(dma_entry_limit,
+		 "Maximum number of user DMA mappings per container (65535).");
+
 struct vfio_iommu {
 	struct list_head	domain_list;
 	struct vfio_domain	*external_domain; /* domain for external user */
 	struct mutex		lock;
 	struct rb_root		dma_list;
 	struct blocking_notifier_head notifier;
+	unsigned int		dma_avail;
 	bool			v2;
 	bool			nesting;
 };
@@ -836,6 +842,7 @@ static void vfio_remove_dma(struct vfio_iommu *iommu, struct vfio_dma *dma)
 	vfio_unlink_dma(iommu, dma);
 	put_task_struct(dma->task);
 	kfree(dma);
+	iommu->dma_avail++;
 }
 
 static unsigned long vfio_pgsize_bitmap(struct vfio_iommu *iommu)
@@ -1110,12 +1117,18 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu,
 		goto out_unlock;
 	}
 
+	if (!iommu->dma_avail) {
+		ret = -ENOSPC;
+		goto out_unlock;
+	}
+
 	dma = kzalloc(sizeof(*dma), GFP_KERNEL);
 	if (!dma) {
 		ret = -ENOMEM;
 		goto out_unlock;
 	}
 
+	iommu->dma_avail--;
 	dma->iova = iova;
 	dma->vaddr = vaddr;
 	dma->prot = prot;
@@ -1612,6 +1625,7 @@ static void *vfio_iommu_type1_open(unsigned long arg)
 
 	INIT_LIST_HEAD(&iommu->domain_list);
 	iommu->dma_list = RB_ROOT;
+	iommu->dma_avail = dma_entry_limit;
 	mutex_init(&iommu->lock);
 	BLOCKING_INIT_NOTIFIER_HEAD(&iommu->notifier);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 33/52] scsi: core: add new RDAC LENOVO/DE_Series device

[Sasha Levin]

From: Xose Vazquez Perez <xose.vazquez@gmail.com>

[ Upstream commit 1cb1d2c64e812928fe0a40b8f7e74523d0283dbe ]

Blacklist "Universal Xport" LUN. It's used for in-band storage array
management.  Also add model to the rdac dh family.

Cc: Martin Wilck <mwilck@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: DM ML <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_devinfo.c | 1 +
 drivers/scsi/scsi_dh.c      | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index c4cbfd07b916..a08ff3bd6310 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -238,6 +238,7 @@ static struct {
 	{"NETAPP", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"LSI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"ENGENIO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+	{"LENOVO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
 	{"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
 	{"SONY", "TSL", NULL, BLIST_FORCELUN},		/* DDS3 & DDS4 autoloaders */
diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c
index 5a58cbf3a75d..c14006ac98f9 100644
--- a/drivers/scsi/scsi_dh.c
+++ b/drivers/scsi/scsi_dh.c
@@ -75,6 +75,7 @@ static const struct scsi_dh_blist scsi_dh_blist[] = {
 	{"NETAPP", "INF-01-00",		"rdac", },
 	{"LSI", "INF-01-00",		"rdac", },
 	{"ENGENIO", "INF-01-00",	"rdac", },
+	{"LENOVO", "DE_Series",		"rdac", },
 	{NULL, NULL,			NULL },
 };
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 34/52] scsi: storvsc: Fix calculation of sub-channel count

[Sasha Levin]

From: Michael Kelley <mikelley@microsoft.com>

[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ]

When the number of sub-channels offered by Hyper-V is >= the number of CPUs
in the VM, calculate the correct number of sub-channels.  The current code
produces one too many.

This scenario arises only when the number of CPUs is artificially
restricted (for example, with maxcpus=<n> on the kernel boot line), because
Hyper-V normally offers a sub-channel count < number of CPUs.  While the
current code doesn't break, the extra sub-channel is unbalanced across the
CPUs (for example, a total of 5 channels on a VM with 4 CPUs).

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/storvsc_drv.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index f03dc03a42c3..0c2ba075bc71 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -664,13 +664,22 @@ static void handle_sc_creation(struct vmbus_channel *new_sc)
 static void  handle_multichannel_storage(struct hv_device *device, int max_chns)
 {
 	struct storvsc_device *stor_device;
-	int num_cpus = num_online_cpus();
 	int num_sc;
 	struct storvsc_cmd_request *request;
 	struct vstor_packet *vstor_packet;
 	int ret, t;
 
-	num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns);
+	/*
+	 * If the number of CPUs is artificially restricted, such as
+	 * with maxcpus=1 on the kernel boot line, Hyper-V could offer
+	 * sub-channels >= the number of CPUs. These sub-channels
+	 * should not be created. The primary channel is already created
+	 * and assigned to one CPU, so check against # CPUs - 1.
+	 */
+	num_sc = min((int)(num_online_cpus() - 1), max_chns);
+	if (!num_sc)
+		return;
+
 	stor_device = get_out_stor_device(device);
 	if (!stor_device)
 		return;
-- 
2.19.1

[PATCH AUTOSEL 4.19 35/52] arm/mach-at91/pm : fix possible object reference leak

[Sasha Levin]

From: Peng Hao <peng.hao2@zte.com.cn>

[ Upstream commit ba5e60c9b75dec92d4c695b928f69300b17d7686 ]

of_find_device_by_node() takes a reference to the struct device
when it finds a match via get_device. When returning error we should
call put_device.

Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-at91/pm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 32fae4dbd63b..0921e2c10edf 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -594,13 +594,13 @@ static int __init at91_pm_backup_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
 	if (!np)
-		goto securam_fail;
+		goto securam_fail_no_ref_dev;
 
 	pdev = of_find_device_by_node(np);
 	of_node_put(np);
 	if (!pdev) {
 		pr_warn("%s: failed to find securam device!\n", __func__);
-		goto securam_fail;
+		goto securam_fail_no_ref_dev;
 	}
 
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
@@ -623,6 +623,8 @@ static int __init at91_pm_backup_init(void)
 	return 0;
 
 securam_fail:
+	put_device(&pdev->dev);
+securam_fail_no_ref_dev:
 	iounmap(pm_data.sfrbu);
 	pm_data.sfrbu = NULL;
 	return ret;
-- 
2.19.1

[PATCH AUTOSEL 4.19 36/52] arm64: fix wrong check of on_sdei_stack in nmi context

[Sasha Levin]

From: Wei Li <liwei391@huawei.com>

[ Upstream commit 1c41860864c8ae0387ef7d44f0000e99cbb2e06d ]

When doing unwind_frame() in the context of pseudo nmi (need enable
CONFIG_ARM64_PSEUDO_NMI), reaching the bottom of the stack (fp == 0,
pc != 0), function on_sdei_stack() will return true while the sdei acpi
table is not inited in fact. This will cause a "NULL pointer dereference"
oops when going on.

Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/sdei.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c
index 5ba4465e44f0..ea94cf8f9dc6 100644
--- a/arch/arm64/kernel/sdei.c
+++ b/arch/arm64/kernel/sdei.c
@@ -94,6 +94,9 @@ static bool on_sdei_normal_stack(unsigned long sp, struct stack_info *info)
 	unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_normal_ptr);
 	unsigned long high = low + SDEI_STACK_SIZE;
 
+	if (!low)
+		return false;
+
 	if (sp < low || sp >= high)
 		return false;
 
@@ -111,6 +114,9 @@ static bool on_sdei_critical_stack(unsigned long sp, struct stack_info *info)
 	unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_critical_ptr);
 	unsigned long high = low + SDEI_STACK_SIZE;
 
+	if (!low)
+		return false;
+
 	if (sp < low || sp >= high)
 		return false;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 37/52] net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()

[Sasha Levin]

From: Liubin Shu <shuliubin@huawei.com>

[ Upstream commit 3a39a12ad364a9acd1038ba8da67cd8430f30de4 ]

This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]

After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.

This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.

Signed-off-by: Liubin Shu <shuliubin@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index b043370c2685..95b4445aeac7 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -376,8 +376,6 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,
 	wmb(); /* commit all data before submit */
 	assert(skb->queue_mapping < priv->ae_handle->q_num);
 	hnae_queue_xmit(priv->ae_handle->qs[skb->queue_mapping], buf_num);
-	ring->stats.tx_pkts++;
-	ring->stats.tx_bytes += skb->len;
 
 	return NETDEV_TX_OK;
 
@@ -999,6 +997,9 @@ static int hns_nic_tx_poll_one(struct hns_nic_ring_data *ring_data,
 		/* issue prefetch for next Tx descriptor */
 		prefetch(&ring->desc_cb[ring->next_to_clean]);
 	}
+	/* update tx ring statistics. */
+	ring->stats.tx_pkts += pkts;
+	ring->stats.tx_bytes += bytes;
 
 	NETIF_TX_UNLOCK(ring);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 38/52] net: hns: Use NAPI_POLL_WEIGHT for hns driver

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]

When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"

This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.

So use NAPI_POLL_WEIGHT to fix it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 95b4445aeac7..58f18032c53c 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -29,9 +29,6 @@
 
 #define SERVICE_TIMER_HZ (1 * HZ)
 
-#define NIC_TX_CLEAN_MAX_NUM 256
-#define NIC_RX_CLEAN_MAX_NUM 64
-
 #define RCB_IRQ_NOT_INITED 0
 #define RCB_IRQ_INITED 1
 #define HNS_BUFFER_SIZE_2048 2048
@@ -2154,7 +2151,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv)
 			hns_nic_tx_fini_pro_v2;
 
 		netif_napi_add(priv->netdev, &rd->napi,
-			       hns_nic_common_poll, NIC_TX_CLEAN_MAX_NUM);
+			       hns_nic_common_poll, NAPI_POLL_WEIGHT);
 		rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED;
 	}
 	for (i = h->q_num; i < h->q_num * 2; i++) {
@@ -2167,7 +2164,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv)
 			hns_nic_rx_fini_pro_v2;
 
 		netif_napi_add(priv->netdev, &rd->napi,
-			       hns_nic_common_poll, NIC_RX_CLEAN_MAX_NUM);
+			       hns_nic_common_poll, NAPI_POLL_WEIGHT);
 		rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 39/52] net: hns: Fix probabilistic memory overwrite when HNS driver initialized

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit c0b0984426814f3a9251873b689e67d34d8ccd84 ]

When reboot the system again and again, may cause a memory
overwrite.

[   15.638922] systemd[1]: Reached target Swap.
[   15.667561] tun: Universal TUN/TAP device driver, 1.6
[   15.676756] Bridge firewalling registered
[   17.344135] Unable to handle kernel paging request at virtual address 0000000200000040
[   17.352179] Mem abort info:
[   17.355007]   ESR = 0x96000004
[   17.358105]   Exception class = DABT (current EL), IL = 32 bits
[   17.364112]   SET = 0, FnV = 0
[   17.367209]   EA = 0, S1PTW = 0
[   17.370393] Data abort info:
[   17.373315]   ISV = 0, ISS = 0x00000004
[   17.377206]   CM = 0, WnR = 0
[   17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[   17.386926] [0000000200000040] pgd=0000000000000000
[   17.391878] Internal error: Oops: 96000004 [#1] SMP
[   17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G            E     4.19.25-1.2.78.aarch64 #1
[   17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018
[   17.425615] Workqueue: events_unbound async_run_entry_fn
[   17.435151] pstate: 00000005 (nzcv daif -PAN -UAO)
[   17.444139] pc : __mutex_lock.isra.1+0x74/0x540
[   17.453002] lr : __mutex_lock.isra.1+0x3c/0x540
[   17.461701] sp : ffff000100d9bb60
[   17.469146] x29: ffff000100d9bb60 x28: 0000000000000000
[   17.478547] x27: 0000000000000000 x26: ffff802fb8945000
[   17.488063] x25: 0000000000000000 x24: ffff802fa32081a8
[   17.497381] x23: 0000000000000002 x22: ffff801fa2b15220
[   17.506701] x21: ffff000009809000 x20: ffff802fa23a0888
[   17.515980] x19: ffff801fa2b15220 x18: 0000000000000000
[   17.525272] x17: 0000000200000000 x16: 0000000200000000
[   17.534511] x15: 0000000000000000 x14: 0000000000000000
[   17.543652] x13: ffff000008d95db8 x12: 000000000000000d
[   17.552780] x11: ffff000008d95d90 x10: 0000000000000b00
[   17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560
[   17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05
[   17.579839] x5 : 0000000000000000 x4 : 0000000000000000
[   17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000
[   17.597734] x1 : 0000000200000000 x0 : 0000000200000000
[   17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____))
[   17.617438] Call trace:
[   17.623349]  __mutex_lock.isra.1+0x74/0x540
[   17.630927]  __mutex_lock_slowpath+0x24/0x30
[   17.638602]  mutex_lock+0x50/0x60
[   17.645295]  drain_workqueue+0x34/0x198
[   17.652623]  __sas_drain_work+0x7c/0x168
[   17.659903]  sas_drain_work+0x60/0x68
[   17.666947]  hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main]
[   17.676129]  do_scsi_scan_host+0x70/0xb0
[   17.683534]  do_scan_async+0x20/0x228
[   17.690586]  async_run_entry_fn+0x4c/0x1d0
[   17.697997]  process_one_work+0x1b4/0x3f8
[   17.705296]  worker_thread+0x54/0x470

Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040

The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
index ba4316910dea..a60f207768fc 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
@@ -129,7 +129,7 @@ static void hns_xgmac_lf_rf_control_init(struct mac_driver *mac_drv)
 	dsaf_set_bit(val, XGMAC_UNIDIR_EN_B, 0);
 	dsaf_set_bit(val, XGMAC_RF_TX_EN_B, 1);
 	dsaf_set_field(val, XGMAC_LF_RF_INSERT_M, XGMAC_LF_RF_INSERT_S, 0);
-	dsaf_write_reg(mac_drv, XGMAC_MAC_TX_LF_RF_CONTROL_REG, val);
+	dsaf_write_dev(mac_drv, XGMAC_MAC_TX_LF_RF_CONTROL_REG, val);
 }
 
 /**
-- 
2.19.1

[PATCH AUTOSEL 4.19 40/52] net: hns: fix ICMP6 neighbor solicitation messages discard problem

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit f058e46855dcbc28edb2ed4736f38a71fd19cadb ]

ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.

This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns/hns_dsaf_main.c    | 33 +++++++++++++++----
 1 file changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index b8155f5e71b4..fdff5526d2e8 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -2750,6 +2750,17 @@ int hns_dsaf_get_regs_count(void)
 	return DSAF_DUMP_REGS_NUM;
 }
 
+static int hns_dsaf_get_port_id(u8 port)
+{
+	if (port < DSAF_SERVICE_NW_NUM)
+		return port;
+
+	if (port >= DSAF_BASE_INNER_PORT_NUM)
+		return port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM;
+
+	return -EINVAL;
+}
+
 static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)
 {
 	struct dsaf_tbl_tcam_ucast_cfg tbl_tcam_ucast = {0, 1, 0, 0, 0x80};
@@ -2815,23 +2826,33 @@ static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)
 	memset(&temp_key, 0x0, sizeof(temp_key));
 	mask_entry.addr[0] = 0x01;
 	hns_dsaf_set_mac_key(dsaf_dev, &mask_key, mask_entry.in_vlan_id,
-			     port, mask_entry.addr);
+			     0xf, mask_entry.addr);
 	tbl_tcam_mcast.tbl_mcast_item_vld = 1;
 	tbl_tcam_mcast.tbl_mcast_old_en = 0;
 
-	if (port < DSAF_SERVICE_NW_NUM) {
-		mskid = port;
-	} else if (port >= DSAF_BASE_INNER_PORT_NUM) {
-		mskid = port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM;
-	} else {
+	/* set MAC port to handle multicast */
+	mskid = hns_dsaf_get_port_id(port);
+	if (mskid == -EINVAL) {
 		dev_err(dsaf_dev->dev, "%s,pnum(%d)error,key(%#x:%#x)\n",
 			dsaf_dev->ae_dev.name, port,
 			mask_key.high.val, mask_key.low.val);
 		return;
 	}
+	dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32],
+		     mskid % 32, 1);
 
+	/* set pool bit map to handle multicast */
+	mskid = hns_dsaf_get_port_id(port_num);
+	if (mskid == -EINVAL) {
+		dev_err(dsaf_dev->dev,
+			"%s, pool bit map pnum(%d)error,key(%#x:%#x)\n",
+			dsaf_dev->ae_dev.name, port_num,
+			mask_key.high.val, mask_key.low.val);
+		return;
+	}
 	dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32],
 		     mskid % 32, 1);
+
 	memcpy(&temp_key, &mask_key, sizeof(mask_key));
 	hns_dsaf_tcam_mc_cfg_vague(dsaf_dev, entry_index, &tbl_tcam_data_mc,
 				   (struct dsaf_tbl_tcam_data *)(&mask_key),
-- 
2.19.1

[PATCH AUTOSEL 4.19 41/52] net: hns: Fix WARNING when remove HNS driver with SMMU enabled

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ]

When enable SMMU, remove HNS driver will cause a WARNING:

[  141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[  141.954673] Modules linked in: hns_enet_drv(-)
[  141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G        W         5.0.0-rc1-28723-gb729c57de95c-dirty #32
[  141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[  142.000244] pstate: 60000005 (nZCv daif -PAN -UAO)
[  142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[  142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[  142.027066] sp : ffff000013533b90
[  142.033728] x29: ffff000013533b90 x28: ffff8013e6983600
[  142.044420] x27: 0000000000000000 x26: 0000000000000000
[  142.055113] x25: 0000000056000000 x24: 0000000000000015
[  142.065806] x23: 0000000000000028 x22: ffff8013e66eee68
[  142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000
[  142.087192] x19: 0000000000001000 x18: 0000000000000007
[  142.097885] x17: 000000000000000e x16: 0000000000000001
[  142.108578] x15: 0000000000000019 x14: 363139343a70616d
[  142.119270] x13: 6e75656761705f67 x12: 0000000000000000
[  142.129963] x11: 00000000ffffffff x10: 0000000000000006
[  142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0
[  142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8
[  142.162042] x5 : 0000000000000000 x4 : 0000000000000000
[  142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500
[  142.183427] x1 : 0000000000000000 x0 : 0000000000000035
[  142.194120] Call trace:
[  142.199030]  __iommu_dma_unmap+0xc0/0xc8
[  142.206920]  iommu_dma_unmap_page+0x20/0x28
[  142.215335]  __iommu_unmap_page+0x40/0x60
[  142.223399]  hnae_unmap_buffer+0x110/0x134
[  142.231639]  hnae_free_desc+0x6c/0x10c
[  142.239177]  hnae_fini_ring+0x14/0x34
[  142.246540]  hnae_fini_queue+0x2c/0x40
[  142.254080]  hnae_put_handle+0x38/0xcc
[  142.261619]  hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[  142.272312]  platform_drv_remove+0x24/0x64
[  142.280552]  device_release_driver_internal+0x17c/0x20c
[  142.291070]  driver_detach+0x4c/0x90
[  142.298259]  bus_remove_driver+0x5c/0xd8
[  142.306148]  driver_unregister+0x2c/0x54
[  142.314037]  platform_driver_unregister+0x10/0x18
[  142.323505]  hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[  142.335248]  __arm64_sys_delete_module+0x214/0x25c
[  142.344891]  el0_svc_common+0xb0/0x10c
[  142.352430]  el0_svc_handler+0x24/0x80
[  142.359968]  el0_svc+0x8/0x7c0
[  142.366104] ---[ end trace 60ad1cd58e63c407 ]---

The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.

The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().

In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c
index 79d03f8ee7b1..c7fa97a7e1f4 100644
--- a/drivers/net/ethernet/hisilicon/hns/hnae.c
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.c
@@ -150,7 +150,6 @@ static int hnae_alloc_buffers(struct hnae_ring *ring)
 /* free desc along with its attached buffer */
 static void hnae_free_desc(struct hnae_ring *ring)
 {
-	hnae_free_buffers(ring);
 	dma_unmap_single(ring_to_dev(ring), ring->desc_dma_addr,
 			 ring->desc_num * sizeof(ring->desc[0]),
 			 ring_to_dma_dir(ring));
@@ -183,6 +182,9 @@ static int hnae_alloc_desc(struct hnae_ring *ring)
 /* fini ring, also free the buffer for the ring */
 static void hnae_fini_ring(struct hnae_ring *ring)
 {
+	if (is_rx_ring(ring))
+		hnae_free_buffers(ring);
+
 	hnae_free_desc(ring);
 	kfree(ring->desc_cb);
 	ring->desc_cb = NULL;
-- 
2.19.1

[PATCH AUTOSEL 4.19 42/52] libcxgb: fix incorrect ppmax calculation

[Sasha Levin]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit cc5a726c79158bd307150e8d4176ec79b52001ea ]

BITS_TO_LONGS() uses DIV_ROUND_UP() because of
this ppmax value can be greater than available
per cpu page pods.

This patch removes BITS_TO_LONGS() to fix this
issue.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
index 74849be5f004..e2919005ead3 100644
--- a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
+++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c
@@ -354,7 +354,10 @@ static struct cxgbi_ppm_pool *ppm_alloc_cpu_pool(unsigned int *total,
 		ppmax = max;
 
 	/* pool size must be multiple of unsigned long */
-	bmap = BITS_TO_LONGS(ppmax);
+	bmap = ppmax / BITS_PER_TYPE(unsigned long);
+	if (!bmap)
+		return NULL;
+
 	ppmax = (bmap * sizeof(unsigned long)) << 3;
 
 	alloc_sz = sizeof(*pools) + sizeof(unsigned long) * bmap;
@@ -402,6 +405,10 @@ int cxgbi_ppm_init(void **ppm_pp, struct net_device *ndev,
 	if (reserve_factor) {
 		ppmax_pool = ppmax / reserve_factor;
 		pool = ppm_alloc_cpu_pool(&ppmax_pool, &pool_index_max);
+		if (!pool) {
+			ppmax_pool = 0;
+			reserve_factor = 0;
+		}
 
 		pr_debug("%s: ppmax %u, cpu total %u, per cpu %u.\n",
 			 ndev->name, ppmax, ppmax_pool, pool_index_max);
-- 
2.19.1

[PATCH AUTOSEL 4.19 43/52] KVM: SVM: prevent DBG_DECRYPT and DBG_ENCRYPT overflow

[Sasha Levin]

From: David Rientjes <rientjes@google.com>

[ Upstream commit b86bc2858b389255cd44555ce4b1e427b2b770c0 ]

This ensures that the address and length provided to DBG_DECRYPT and
DBG_ENCRYPT do not cause an overflow.

At the same time, pass the actual number of pages pinned in memory to
sev_unpin_memory() as a cleanup.

Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/svm.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 6dc72804fe6e..cb3926c0a4cc 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -6775,7 +6775,8 @@ static int sev_dbg_crypt(struct kvm *kvm, struct kvm_sev_cmd *argp, bool dec)
 	struct page **src_p, **dst_p;
 	struct kvm_sev_dbg debug;
 	unsigned long n;
-	int ret, size;
+	unsigned int size;
+	int ret;
 
 	if (!sev_guest(kvm))
 		return -ENOTTY;
@@ -6783,6 +6784,11 @@ static int sev_dbg_crypt(struct kvm *kvm, struct kvm_sev_cmd *argp, bool dec)
 	if (copy_from_user(&debug, (void __user *)(uintptr_t)argp->data, sizeof(debug)))
 		return -EFAULT;
 
+	if (!debug.len || debug.src_uaddr + debug.len < debug.src_uaddr)
+		return -EINVAL;
+	if (!debug.dst_uaddr)
+		return -EINVAL;
+
 	vaddr = debug.src_uaddr;
 	size = debug.len;
 	vaddr_end = vaddr + size;
@@ -6833,8 +6839,8 @@ static int sev_dbg_crypt(struct kvm *kvm, struct kvm_sev_cmd *argp, bool dec)
 						     dst_vaddr,
 						     len, &argp->error);
 
-		sev_unpin_memory(kvm, src_p, 1);
-		sev_unpin_memory(kvm, dst_p, 1);
+		sev_unpin_memory(kvm, src_p, n);
+		sev_unpin_memory(kvm, dst_p, n);
 
 		if (ret)
 			goto err;
-- 
2.19.1

[PATCH AUTOSEL 4.19 44/52] kmemleak: powerpc: skip scanning holes in the .bss section

[Sasha Levin]

From: Catalin Marinas <catalin.marinas@arm.com>

[ Upstream commit 298a32b132087550d3fa80641ca58323c5dfd4d9 ]

Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.

kernel_init
  kvm_guest_init
    kvm_free_tmp
      free_reserved_area
        free_unref_page
          free_unref_page_prepare

With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel.  As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.

This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.

Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Qian Cai <cai@lca.pw>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/kvm.c |  7 +++++++
 mm/kmemleak.c             | 16 +++++++++++-----
 2 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 683b5b3805bd..cd381e2291df 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -22,6 +22,7 @@
 #include <linux/kvm_host.h>
 #include <linux/init.h>
 #include <linux/export.h>
+#include <linux/kmemleak.h>
 #include <linux/kvm_para.h>
 #include <linux/slab.h>
 #include <linux/of.h>
@@ -712,6 +713,12 @@ static void kvm_use_magic_page(void)
 
 static __init void kvm_free_tmp(void)
 {
+	/*
+	 * Inform kmemleak about the hole in the .bss section since the
+	 * corresponding pages will be unmapped with DEBUG_PAGEALLOC=y.
+	 */
+	kmemleak_free_part(&kvm_tmp[kvm_tmp_index],
+			   ARRAY_SIZE(kvm_tmp) - kvm_tmp_index);
 	free_reserved_area(&kvm_tmp[kvm_tmp_index],
 			   &kvm_tmp[ARRAY_SIZE(kvm_tmp)], -1, NULL);
 }
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 17dd883198ae..5912a26e041c 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1501,11 +1501,6 @@ static void kmemleak_scan(void)
 	}
 	rcu_read_unlock();
 
-	/* data/bss scanning */
-	scan_large_block(_sdata, _edata);
-	scan_large_block(__bss_start, __bss_stop);
-	scan_large_block(__start_ro_after_init, __end_ro_after_init);
-
 #ifdef CONFIG_SMP
 	/* per-cpu sections scanning */
 	for_each_possible_cpu(i)
@@ -2036,6 +2031,17 @@ void __init kmemleak_init(void)
 	}
 	local_irq_restore(flags);
 
+	/* register the data/bss sections */
+	create_object((unsigned long)_sdata, _edata - _sdata,
+		      KMEMLEAK_GREY, GFP_ATOMIC);
+	create_object((unsigned long)__bss_start, __bss_stop - __bss_start,
+		      KMEMLEAK_GREY, GFP_ATOMIC);
+	/* only register .data..ro_after_init if not within .data */
+	if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
+		create_object((unsigned long)__start_ro_after_init,
+			      __end_ro_after_init - __start_ro_after_init,
+			      KMEMLEAK_GREY, GFP_ATOMIC);
+
 	/*
 	 * This is the point where tracking allocations is safe. Automatic
 	 * scanning is started during the late initcall. Add the early logged
-- 
2.19.1

[PATCH AUTOSEL 4.19 45/52] hugetlbfs: fix memory leak for resv_map

[Sasha Levin]

From: Mike Kravetz <mike.kravetz@oracle.com>

[ Upstream commit 58b6e5e8f1addd44583d61b0a03c0f5519527e35 ]

When mknod is used to create a block special file in hugetlbfs, it will
allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc().
inode->i_mapping->private_data will point the newly allocated resv_map.
However, when the device special file is opened bd_acquire() will set
inode->i_mapping to bd_inode->i_mapping.  Thus the pointer to the
allocated resv_map is lost and the structure is leaked.

Programs to reproduce:
        mount -t hugetlbfs nodev hugetlbfs
        mknod hugetlbfs/dev b 0 0
        exec 30<> hugetlbfs/dev
        umount hugetlbfs/

resv_map structures are only needed for inodes which can have associated
page allocations.  To fix the leak, only allocate resv_map for those
inodes which could possibly be associated with page allocations.

Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Yufen Yu <yuyufen@huawei.com>
Suggested-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hugetlbfs/inode.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index a7fa037b876b..a3a3d256fb0e 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -741,11 +741,17 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,
 					umode_t mode, dev_t dev)
 {
 	struct inode *inode;
-	struct resv_map *resv_map;
+	struct resv_map *resv_map = NULL;
 
-	resv_map = resv_map_alloc();
-	if (!resv_map)
-		return NULL;
+	/*
+	 * Reserve maps are only needed for inodes that can have associated
+	 * page allocations.
+	 */
+	if (S_ISREG(mode) || S_ISLNK(mode)) {
+		resv_map = resv_map_alloc();
+		if (!resv_map)
+			return NULL;
+	}
 
 	inode = new_inode(sb);
 	if (inode) {
@@ -780,8 +786,10 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,
 			break;
 		}
 		lockdep_annotate_inode_mutex_key(inode);
-	} else
-		kref_put(&resv_map->refs, resv_map_release);
+	} else {
+		if (resv_map)
+			kref_put(&resv_map->refs, resv_map_release);
+	}
 
 	return inode;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 46/52] sh: fix multiple function definition build errors

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit acaf892ecbf5be7710ae05a61fd43c668f68ad95 ]

Many of the sh CPU-types have their own plat_irq_setup() and
arch_init_clk_ops() functions, so these same (empty) functions in
arch/sh/boards/of-generic.c are not needed and cause build errors.

If there is some case where these empty functions are needed, they can
be retained by marking them as "__weak" while at the same time making
builds that do not need them succeed.

Fixes these build errors:

arch/sh/boards/of-generic.o: In function `plat_irq_setup':
(.init.text+0x134): multiple definition of `plat_irq_setup'
arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here
arch/sh/boards/of-generic.o: In function `arch_init_clk_ops':
(.init.text+0x118): multiple definition of `arch_init_clk_ops'
arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here

Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/boards/of-generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index 26789ad28193..cb99df514a1c 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -175,10 +175,10 @@ static struct sh_machine_vector __initmv sh_of_generic_mv = {
 
 struct sh_clk_ops;
 
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+void __init __weak arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 }
 
-void __init plat_irq_setup(void)
+void __init __weak plat_irq_setup(void)
 {
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 47/52] kernel/sysctl.c: fix out-of-bounds access when setting file-max

[Sasha Levin]

From: Will Deacon <will.deacon@arm.com>

[ Upstream commit 9002b21465fa4d829edfc94a5a441005cffaa972 ]

Commit 32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up
min/max values for the file-max sysctl parameter via the .extra1 and
.extra2 fields in the corresponding struct ctl_table entry.

Unfortunately, the minimum value points at the global 'zero' variable,
which is an int.  This results in a KASAN splat when accessed as a long
by proc_doulongvec_minmax on 64-bit architectures:

  | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0
  | Read of size 8 at addr ffff2000133d1c20 by task systemd/1
  |
  | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2
  | Hardware name: linux,dummy-virt (DT)
  | Call trace:
  |  dump_backtrace+0x0/0x228
  |  show_stack+0x14/0x20
  |  dump_stack+0xe8/0x124
  |  print_address_description+0x60/0x258
  |  kasan_report+0x140/0x1a0
  |  __asan_report_load8_noabort+0x18/0x20
  |  __do_proc_doulongvec_minmax+0x5d8/0x6a0
  |  proc_doulongvec_minmax+0x4c/0x78
  |  proc_sys_call_handler.isra.19+0x144/0x1d8
  |  proc_sys_write+0x34/0x58
  |  __vfs_write+0x54/0xe8
  |  vfs_write+0x124/0x3c0
  |  ksys_write+0xbc/0x168
  |  __arm64_sys_write+0x68/0x98
  |  el0_svc_common+0x100/0x258
  |  el0_svc_handler+0x48/0xc0
  |  el0_svc+0x8/0xc
  |
  | The buggy address belongs to the variable:
  |  zero+0x0/0x40
  |
  | Memory state around the buggy address:
  |  ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa
  |  ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa
  | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
  |                                ^
  |  ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00
  |  ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fix the splat by introducing a unsigned long 'zero_ul' and using that
instead.

Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com
Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Christian Brauner <christian@brauner.io>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sysctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 9e22660153ff..9a85c7ae7362 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -125,6 +125,7 @@ static int zero;
 static int __maybe_unused one = 1;
 static int __maybe_unused two = 2;
 static int __maybe_unused four = 4;
+static unsigned long zero_ul;
 static unsigned long one_ul = 1;
 static unsigned long long_max = LONG_MAX;
 static int one_hundred = 100;
@@ -1696,7 +1697,7 @@ static struct ctl_table fs_table[] = {
 		.maxlen		= sizeof(files_stat.max_files),
 		.mode		= 0644,
 		.proc_handler	= proc_doulongvec_minmax,
-		.extra1		= &zero,
+		.extra1		= &zero_ul,
 		.extra2		= &long_max,
 	},
 	{
-- 
2.19.1

[PATCH AUTOSEL 4.19 48/52] xsysace: Fix error handling in ace_setup

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 47b16820c490149c2923e8474048f2c6e7557cab ]

If xace hardware reports a bad version number, the error handling code
in ace_setup() calls put_disk(), followed by queue cleanup. However, since
the disk data structure has the queue pointer set, put_disk() also
cleans and releases the queue. This results in blk_cleanup_queue()
accessing an already released data structure, which in turn may result
in a crash such as the following.

[   10.681671] BUG: Kernel NULL pointer dereference at 0x00000040
[   10.681826] Faulting instruction address: 0xc0431480
[   10.682072] Oops: Kernel access of bad area, sig: 11 [#1]
[   10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440
[   10.682387] Modules linked in:
[   10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G        W         5.0.0-rc6-next-20190218+ #2
[   10.682733] NIP:  c0431480 LR: c043147c CTR: c0422ad8
[   10.682863] REGS: cf82fbe0 TRAP: 0300   Tainted: G        W          (5.0.0-rc6-next-20190218+)
[   10.683065] MSR:  00029000 <CE,EE,ME>  CR: 22000222  XER: 00000000
[   10.683236] DEAR: 00000040 ESR: 00000000
[   10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000
[   10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000
[   10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000
[   10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800
[   10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114
[   10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114
[   10.684602] Call Trace:
[   10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable)
[   10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c
[   10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68
[   10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c
[   10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508
[   10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8
[   10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c
[   10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464
[   10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4
[   10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc
[   10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0
[   10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234
[   10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c
[   10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac
[   10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330
[   10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478
[   10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114
[   10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c
[   10.687349] Instruction dump:
[   10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008
[   10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008
[   10.688056] ---[ end trace 13c9ff51d41b9d40 ]---

Fix the problem by setting the disk queue pointer to NULL before calling
put_disk(). A more comprehensive fix might be to rearrange the code
to check the hardware version before initializing data structures,
but I don't know if this would have undesirable side effects, and
it would increase the complexity of backporting the fix to older kernels.

Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface")
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/xsysace.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index c24589414c75..0f36db0cf74a 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1063,6 +1063,8 @@ static int ace_setup(struct ace_device *ace)
 	return 0;
 
 err_read:
+	/* prevent double queue cleanup */
+	ace->gd->queue = NULL;
 	put_disk(ace->gd);
 err_alloc_disk:
 	blk_cleanup_queue(ace->queue);
-- 
2.19.1

[PATCH AUTOSEL 4.19 49/52] fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock

[Sasha Levin]

From: Kirill Smelkov <kirr@nexedi.com>

[ Upstream commit 10dce8af34226d90fa56746a934f8da5dcdba3df ]

Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.

This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.

The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.

However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f2655e3 -
is doing so irregardless of whether a file is seekable or not.

See

    https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
    https://lwn.net/Articles/180387
    https://lwn.net/Articles/180396

for historic context.

The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:

	kernel/power/user.c		snapshot_read
	fs/debugfs/file.c		u32_array_read
	fs/fuse/control.c		fuse_conn_waiting_read + ...
	drivers/hwmon/asus_atk0110.c	atk_debugfs_ggrp_read
	arch/s390/hypfs/inode.c		hypfs_read_iter
	...

Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.

Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):

	drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
	drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
	drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
	drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
	net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
	drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
	drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
	drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
	net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
	drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
	drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
	drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
	drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
	drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()

In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.

FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:

See

    https://github.com/libfuse/osspd
    https://lwn.net/Articles/308445

    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510

Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:

    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216

I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:

    https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169

Let's fix this regression. The plan is:

1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
   doing so would break many in-kernel nonseekable_open users which
   actually use ppos in read/write handlers.

2. Add stream_open() to kernel to open stream-like non-seekable file
   descriptors. Read and write on such file descriptors would never use
   nor change ppos. And with that property on stream-like files read and
   write will be running without taking f_pos lock - i.e. read and write
   could be running simultaneously.

3. With semantic patch search and convert to stream_open all in-kernel
   nonseekable_open users for which read and write actually do not
   depend on ppos and where there is no other methods in file_operations
   which assume @offset access.

4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
   steam_open if that bit is present in filesystem open reply.

   It was tempting to change fs/fuse/ open handler to use stream_open
   instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
   grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
   and in particular GVFS which actually uses offset in its read and
   write handlers

	https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481

   so if we would do such a change it will break a real user.

5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
   from v3.14+ (the kernel where 9c225f2655 first appeared).

   This will allow to patch OSSPD and other FUSE filesystems that
   provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
   in their open handler and this way avoid the deadlock on all kernel
   versions. This should work because fs/fuse/ ignores unknown open
   flags returned from a filesystem and so passing FOPEN_STREAM to a
   kernel that is not aware of this flag cannot hurt. In turn the kernel
   that is not aware of FOPEN_STREAM will be < v3.14 where just
   FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
   write deadlock.

This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.

Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.

The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xenbus/xenbus_dev_frontend.c |   4 +-
 fs/open.c                                |  18 ++
 fs/read_write.c                          |   5 +-
 include/linux/fs.h                       |   4 +
 scripts/coccinelle/api/stream_open.cocci | 363 +++++++++++++++++++++++
 5 files changed, 389 insertions(+), 5 deletions(-)
 create mode 100644 scripts/coccinelle/api/stream_open.cocci

diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c
index c3e201025ef0..0782ff3c2273 100644
--- a/drivers/xen/xenbus/xenbus_dev_frontend.c
+++ b/drivers/xen/xenbus/xenbus_dev_frontend.c
@@ -622,9 +622,7 @@ static int xenbus_file_open(struct inode *inode, struct file *filp)
 	if (xen_store_evtchn == 0)
 		return -ENOENT;
 
-	nonseekable_open(inode, filp);
-
-	filp->f_mode &= ~FMODE_ATOMIC_POS; /* cdev-style semantics */
+	stream_open(inode, filp);
 
 	u = kzalloc(sizeof(*u), GFP_KERNEL);
 	if (u == NULL)
diff --git a/fs/open.c b/fs/open.c
index f1c2f855fd43..a00350018a47 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1215,3 +1215,21 @@ int nonseekable_open(struct inode *inode, struct file *filp)
 }
 
 EXPORT_SYMBOL(nonseekable_open);
+
+/*
+ * stream_open is used by subsystems that want stream-like file descriptors.
+ * Such file descriptors are not seekable and don't have notion of position
+ * (file.f_pos is always 0). Contrary to file descriptors of other regular
+ * files, .read() and .write() can run simultaneously.
+ *
+ * stream_open never fails and is marked to return int so that it could be
+ * directly used as file_operations.open .
+ */
+int stream_open(struct inode *inode, struct file *filp)
+{
+	filp->f_mode &= ~(FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE | FMODE_ATOMIC_POS);
+	filp->f_mode |= FMODE_STREAM;
+	return 0;
+}
+
+EXPORT_SYMBOL(stream_open);
diff --git a/fs/read_write.c b/fs/read_write.c
index 562974a0616c..85fd7a8ee29e 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -560,12 +560,13 @@ ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_
 
 static inline loff_t file_pos_read(struct file *file)
 {
-	return file->f_pos;
+	return file->f_mode & FMODE_STREAM ? 0 : file->f_pos;
 }
 
 static inline void file_pos_write(struct file *file, loff_t pos)
 {
-	file->f_pos = pos;
+	if ((file->f_mode & FMODE_STREAM) == 0)
+		file->f_pos = pos;
 }
 
 ssize_t ksys_read(unsigned int fd, char __user *buf, size_t count)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7b6084854bfe..89e16608bbef 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -153,6 +153,9 @@ typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
 #define FMODE_OPENED		((__force fmode_t)0x80000)
 #define FMODE_CREATED		((__force fmode_t)0x100000)
 
+/* File is stream-like */
+#define FMODE_STREAM		((__force fmode_t)0x200000)
+
 /* File was opened by fanotify and shouldn't generate fanotify events */
 #define FMODE_NONOTIFY		((__force fmode_t)0x4000000)
 
@@ -3013,6 +3016,7 @@ extern loff_t no_seek_end_llseek_size(struct file *, loff_t, int, loff_t);
 extern loff_t no_seek_end_llseek(struct file *, loff_t, int);
 extern int generic_file_open(struct inode * inode, struct file * filp);
 extern int nonseekable_open(struct inode * inode, struct file * filp);
+extern int stream_open(struct inode * inode, struct file * filp);
 
 #ifdef CONFIG_BLOCK
 typedef void (dio_submit_t)(struct bio *bio, struct inode *inode,
diff --git a/scripts/coccinelle/api/stream_open.cocci b/scripts/coccinelle/api/stream_open.cocci
new file mode 100644
index 000000000000..350145da7669
--- /dev/null
+++ b/scripts/coccinelle/api/stream_open.cocci
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+// Author: Kirill Smelkov (kirr@nexedi.com)
+//
+// Search for stream-like files that are using nonseekable_open and convert
+// them to stream_open. A stream-like file is a file that does not use ppos in
+// its read and write. Rationale for the conversion is to avoid deadlock in
+// between read and write.
+
+virtual report
+virtual patch
+virtual explain  // explain decisions in the patch (SPFLAGS="-D explain")
+
+// stream-like reader & writer - ones that do not depend on f_pos.
+@ stream_reader @
+identifier readstream, ppos;
+identifier f, buf, len;
+type loff_t;
+@@
+  ssize_t readstream(struct file *f, char *buf, size_t len, loff_t *ppos)
+  {
+    ... when != ppos
+  }
+
+@ stream_writer @
+identifier writestream, ppos;
+identifier f, buf, len;
+type loff_t;
+@@
+  ssize_t writestream(struct file *f, const char *buf, size_t len, loff_t *ppos)
+  {
+    ... when != ppos
+  }
+
+
+// a function that blocks
+@ blocks @
+identifier block_f;
+identifier wait_event =~ "^wait_event_.*";
+@@
+  block_f(...) {
+    ... when exists
+    wait_event(...)
+    ... when exists
+  }
+
+// stream_reader that can block inside.
+//
+// XXX wait_* can be called not directly from current function (e.g. func -> f -> g -> wait())
+// XXX currently reader_blocks supports only direct and 1-level indirect cases.
+@ reader_blocks_direct @
+identifier stream_reader.readstream;
+identifier wait_event =~ "^wait_event_.*";
+@@
+  readstream(...)
+  {
+    ... when exists
+    wait_event(...)
+    ... when exists
+  }
+
+@ reader_blocks_1 @
+identifier stream_reader.readstream;
+identifier blocks.block_f;
+@@
+  readstream(...)
+  {
+    ... when exists
+    block_f(...)
+    ... when exists
+  }
+
+@ reader_blocks depends on reader_blocks_direct || reader_blocks_1 @
+identifier stream_reader.readstream;
+@@
+  readstream(...) {
+    ...
+  }
+
+
+// file_operations + whether they have _any_ .read, .write, .llseek ... at all.
+//
+// XXX add support for file_operations xxx[N] = ...	(sound/core/pcm_native.c)
+@ fops0 @
+identifier fops;
+@@
+  struct file_operations fops = {
+    ...
+  };
+
+@ has_read @
+identifier fops0.fops;
+identifier read_f;
+@@
+  struct file_operations fops = {
+    .read = read_f,
+  };
+
+@ has_read_iter @
+identifier fops0.fops;
+identifier read_iter_f;
+@@
+  struct file_operations fops = {
+    .read_iter = read_iter_f,
+  };
+
+@ has_write @
+identifier fops0.fops;
+identifier write_f;
+@@
+  struct file_operations fops = {
+    .write = write_f,
+  };
+
+@ has_write_iter @
+identifier fops0.fops;
+identifier write_iter_f;
+@@
+  struct file_operations fops = {
+    .write_iter = write_iter_f,
+  };
+
+@ has_llseek @
+identifier fops0.fops;
+identifier llseek_f;
+@@
+  struct file_operations fops = {
+    .llseek = llseek_f,
+  };
+
+@ has_no_llseek @
+identifier fops0.fops;
+@@
+  struct file_operations fops = {
+    .llseek = no_llseek,
+  };
+
+@ has_mmap @
+identifier fops0.fops;
+identifier mmap_f;
+@@
+  struct file_operations fops = {
+    .mmap = mmap_f,
+  };
+
+@ has_copy_file_range @
+identifier fops0.fops;
+identifier copy_file_range_f;
+@@
+  struct file_operations fops = {
+    .copy_file_range = copy_file_range_f,
+  };
+
+@ has_remap_file_range @
+identifier fops0.fops;
+identifier remap_file_range_f;
+@@
+  struct file_operations fops = {
+    .remap_file_range = remap_file_range_f,
+  };
+
+@ has_splice_read @
+identifier fops0.fops;
+identifier splice_read_f;
+@@
+  struct file_operations fops = {
+    .splice_read = splice_read_f,
+  };
+
+@ has_splice_write @
+identifier fops0.fops;
+identifier splice_write_f;
+@@
+  struct file_operations fops = {
+    .splice_write = splice_write_f,
+  };
+
+
+// file_operations that is candidate for stream_open conversion - it does not
+// use mmap and other methods that assume @offset access to file.
+//
+// XXX for simplicity require no .{read/write}_iter and no .splice_{read/write} for now.
+// XXX maybe_steam.fops cannot be used in other rules - it gives "bad rule maybe_stream or bad variable fops".
+@ maybe_stream depends on (!has_llseek || has_no_llseek) && !has_mmap && !has_copy_file_range && !has_remap_file_range && !has_read_iter && !has_write_iter && !has_splice_read && !has_splice_write @
+identifier fops0.fops;
+@@
+  struct file_operations fops = {
+  };
+
+
+// ---- conversions ----
+
+// XXX .open = nonseekable_open -> .open = stream_open
+// XXX .open = func -> openfunc -> nonseekable_open
+
+// read & write
+//
+// if both are used in the same file_operations together with an opener -
+// under that conditions we can use stream_open instead of nonseekable_open.
+@ fops_rw depends on maybe_stream @
+identifier fops0.fops, openfunc;
+identifier stream_reader.readstream;
+identifier stream_writer.writestream;
+@@
+  struct file_operations fops = {
+      .open  = openfunc,
+      .read  = readstream,
+      .write = writestream,
+  };
+
+@ report_rw depends on report @
+identifier fops_rw.openfunc;
+position p1;
+@@
+  openfunc(...) {
+    <...
+     nonseekable_open@p1
+    ...>
+  }
+
+@ script:python depends on report && reader_blocks @
+fops << fops0.fops;
+p << report_rw.p1;
+@@
+coccilib.report.print_report(p[0],
+  "ERROR: %s: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix." % (fops,))
+
+@ script:python depends on report && !reader_blocks @
+fops << fops0.fops;
+p << report_rw.p1;
+@@
+coccilib.report.print_report(p[0],
+  "WARNING: %s: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open." % (fops,))
+
+
+@ explain_rw_deadlocked depends on explain && reader_blocks @
+identifier fops_rw.openfunc;
+@@
+  openfunc(...) {
+    <...
+-    nonseekable_open
++    nonseekable_open /* read & write (was deadlock) */
+    ...>
+  }
+
+
+@ explain_rw_nodeadlock depends on explain && !reader_blocks @
+identifier fops_rw.openfunc;
+@@
+  openfunc(...) {
+    <...
+-    nonseekable_open
++    nonseekable_open /* read & write (no direct deadlock) */
+    ...>
+  }
+
+@ patch_rw depends on patch @
+identifier fops_rw.openfunc;
+@@
+  openfunc(...) {
+    <...
+-   nonseekable_open
++   stream_open
+    ...>
+  }
+
+
+// read, but not write
+@ fops_r depends on maybe_stream && !has_write @
+identifier fops0.fops, openfunc;
+identifier stream_reader.readstream;
+@@
+  struct file_operations fops = {
+      .open  = openfunc,
+      .read  = readstream,
+  };
+
+@ report_r depends on report @
+identifier fops_r.openfunc;
+position p1;
+@@
+  openfunc(...) {
+    <...
+    nonseekable_open@p1
+    ...>
+  }
+
+@ script:python depends on report @
+fops << fops0.fops;
+p << report_r.p1;
+@@
+coccilib.report.print_report(p[0],
+  "WARNING: %s: .read() has stream semantic; safe to change nonseekable_open -> stream_open." % (fops,))
+
+@ explain_r depends on explain @
+identifier fops_r.openfunc;
+@@
+  openfunc(...) {
+    <...
+-   nonseekable_open
++   nonseekable_open /* read only */
+    ...>
+  }
+
+@ patch_r depends on patch @
+identifier fops_r.openfunc;
+@@
+  openfunc(...) {
+    <...
+-   nonseekable_open
++   stream_open
+    ...>
+  }
+
+
+// write, but not read
+@ fops_w depends on maybe_stream && !has_read @
+identifier fops0.fops, openfunc;
+identifier stream_writer.writestream;
+@@
+  struct file_operations fops = {
+      .open  = openfunc,
+      .write = writestream,
+  };
+
+@ report_w depends on report @
+identifier fops_w.openfunc;
+position p1;
+@@
+  openfunc(...) {
+    <...
+    nonseekable_open@p1
+    ...>
+  }
+
+@ script:python depends on report @
+fops << fops0.fops;
+p << report_w.p1;
+@@
+coccilib.report.print_report(p[0],
+  "WARNING: %s: .write() has stream semantic; safe to change nonseekable_open -> stream_open." % (fops,))
+
+@ explain_w depends on explain @
+identifier fops_w.openfunc;
+@@
+  openfunc(...) {
+    <...
+-   nonseekable_open
++   nonseekable_open /* write only */
+    ...>
+  }
+
+@ patch_w depends on patch @
+identifier fops_w.openfunc;
+@@
+  openfunc(...) {
+    <...
+-   nonseekable_open
++   stream_open
+    ...>
+  }
+
+
+// no read, no write - don't change anything
-- 
2.19.1

Re: [PATCH AUTOSEL 4.19 49/52] fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock

[Greg Kroah-Hartman]

On Wed, Apr 24, 2019 at 10:39:07AM -0400, Sasha Levin wrote:
> From: Kirill Smelkov <kirr@nexedi.com>
> 
> [ Upstream commit 10dce8af34226d90fa56746a934f8da5dcdba3df ]
> 
> Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
> locking for file.f_pos access and in particular made concurrent read and
> write not possible - now both those functions take f_pos lock for the
> whole run, and so if e.g. a read is blocked waiting for data, write will
> deadlock waiting for that read to complete.
> 
> This caused regression for stream-like files where previously read and
> write could run simultaneously, but after that patch could not do so
> anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes
> to /proc/xen/xenbus") which fixes such regression for particular case of
> /proc/xen/xenbus.
> 
> The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
> safety for read/write/lseek and added the locking to file descriptors of
> all regular files. In 2014 that thread-safety problem was not new as it
> was already discussed earlier in 2006.
> 
> However even though 2006'th version of Linus's patch was adding f_pos
> locking "only for files that are marked seekable with FMODE_LSEEK (thus
> avoiding the stream-like objects like pipes and sockets)", the 2014
> version - the one that actually made it into the tree as 9c225f2655e3 -
> is doing so irregardless of whether a file is seekable or not.
> 
> See
> 
>     https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
>     https://lwn.net/Articles/180387
>     https://lwn.net/Articles/180396
> 
> for historic context.
> 
> The reason that it did so is, probably, that there are many files that
> are marked non-seekable, but e.g. their read implementation actually
> depends on knowing current position to correctly handle the read. Some
> examples:
> 
> 	kernel/power/user.c		snapshot_read
> 	fs/debugfs/file.c		u32_array_read
> 	fs/fuse/control.c		fuse_conn_waiting_read + ...
> 	drivers/hwmon/asus_atk0110.c	atk_debugfs_ggrp_read
> 	arch/s390/hypfs/inode.c		hypfs_read_iter
> 	...
> 
> Despite that, many nonseekable_open users implement read and write with
> pure stream semantics - they don't depend on passed ppos at all. And for
> those cases where read could wait for something inside, it creates a
> situation similar to xenbus - the write could be never made to go until
> read is done, and read is waiting for some, potentially external, event,
> for potentially unbounded time -> deadlock.
> 
> Besides xenbus, there are 14 such places in the kernel that I've found
> with semantic patch (see below):
> 
> 	drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
> 	drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
> 	drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
> 	drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
> 	net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
> 	drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
> 	drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
> 	drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
> 	net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
> 	drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
> 	drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
> 	drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
> 	drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
> 	drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()
> 
> In addition to the cases above another regression caused by f_pos
> locking is that now FUSE filesystems that implement open with
> FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
> stream-like files - for the same reason as above e.g. read can deadlock
> write locking on file.f_pos in the kernel.
> 
> FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse:
> implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
> in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
> write routines not depending on current position at all, and with both
> read and write being potentially blocking operations:
> 
> See
> 
>     https://github.com/libfuse/osspd
>     https://lwn.net/Articles/308445
> 
>     https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
>     https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
>     https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510
> 
> Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
> "somewhat pipe-like files ..." with read handler not using offset.
> However that test implements only read without write and cannot exercise
> the deadlock scenario:
> 
>     https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
>     https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
>     https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216
> 
> I've actually hit the read vs write deadlock for real while implementing
> my FUSE filesystem where there is /head/watch file, for which open
> creates separate bidirectional socket-like stream in between filesystem
> and its user with both read and write being later performed
> simultaneously. And there it is semantically not easy to split the
> stream into two separate read-only and write-only channels:
> 
>     https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169
> 
> Let's fix this regression. The plan is:
> 
> 1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
>    doing so would break many in-kernel nonseekable_open users which
>    actually use ppos in read/write handlers.
> 
> 2. Add stream_open() to kernel to open stream-like non-seekable file
>    descriptors. Read and write on such file descriptors would never use
>    nor change ppos. And with that property on stream-like files read and
>    write will be running without taking f_pos lock - i.e. read and write
>    could be running simultaneously.
> 
> 3. With semantic patch search and convert to stream_open all in-kernel
>    nonseekable_open users for which read and write actually do not
>    depend on ppos and where there is no other methods in file_operations
>    which assume @offset access.
> 
> 4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
>    steam_open if that bit is present in filesystem open reply.
> 
>    It was tempting to change fs/fuse/ open handler to use stream_open
>    instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
>    grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
>    and in particular GVFS which actually uses offset in its read and
>    write handlers
> 
> 	https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
> 	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
> 	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
> 	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481
> 
>    so if we would do such a change it will break a real user.
> 
> 5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
>    from v3.14+ (the kernel where 9c225f2655 first appeared).
> 
>    This will allow to patch OSSPD and other FUSE filesystems that
>    provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
>    in their open handler and this way avoid the deadlock on all kernel
>    versions. This should work because fs/fuse/ ignores unknown open
>    flags returned from a filesystem and so passing FOPEN_STREAM to a
>    kernel that is not aware of this flag cannot hurt. In turn the kernel
>    that is not aware of FOPEN_STREAM will be < v3.14 where just
>    FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
>    write deadlock.
> 
> This patch adds stream_open, converts /proc/xen/xenbus to it and adds
> semantic patch to automatically locate in-kernel places that are either
> required to be converted due to read vs write deadlock, or that are just
> safe to be converted because read and write do not use ppos and there
> are no other funky methods in file_operations.
> 
> Regarding semantic patch I've verified each generated change manually -
> that it is correct to convert - and each other nonseekable_open instance
> left - that it is either not correct to convert there, or that it is not
> converted due to current stream_open.cocci limitations.
> 
> The script also does not convert files that should be valid to convert,
> but that currently have .llseek = noop_llseek or generic_file_llseek for
> unknown reason despite file being opened with nonseekable_open (e.g.
> drivers/input/mousedev.c)
> 
> Cc: Michael Kerrisk <mtk.manpages@gmail.com>
> Cc: Yongzhi Pan <panyongzhi@gmail.com>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: David Vrabel <david.vrabel@citrix.com>
> Cc: Juergen Gross <jgross@suse.com>
> Cc: Miklos Szeredi <miklos@szeredi.hu>
> Cc: Tejun Heo <tj@kernel.org>
> Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Julia Lawall <Julia.Lawall@lip6.fr>
> Cc: Nikolaus Rath <Nikolaus@rath.org>
> Cc: Han-Wen Nienhuys <hanwen@google.com>
> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/xen/xenbus/xenbus_dev_frontend.c |   4 +-
>  fs/open.c                                |  18 ++
>  fs/read_write.c                          |   5 +-
>  include/linux/fs.h                       |   4 +
>  scripts/coccinelle/api/stream_open.cocci | 363 +++++++++++++++++++++++
>  5 files changed, 389 insertions(+), 5 deletions(-)
>  create mode 100644 scripts/coccinelle/api/stream_open.cocci

Same comment as on the 5.0 patch, I think this should be dropped from
the autosel queue.

thanks,

greg k-h

[PATCH AUTOSEL 4.19 50/52] ARM: orion: don't use using 64-bit DMA masks

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit cd92d74d67c811dc22544430b9ac3029f5bd64c5 ]

clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:

arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
                .coherent_dma_mask      = DMA_BIT_MASK(64),
                                          ^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))

The ones in orion shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/plat-orion/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index a2399fd66e97..1e970873439c 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -622,7 +622,7 @@ static struct platform_device orion_xor0_shared = {
 	.resource	= orion_xor0_shared_resources,
 	.dev            = {
 		.dma_mask               = &orion_xor_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(64),
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 		.platform_data          = &orion_xor0_pdata,
 	},
 };
@@ -683,7 +683,7 @@ static struct platform_device orion_xor1_shared = {
 	.resource	= orion_xor1_shared_resources,
 	.dev            = {
 		.dma_mask               = &orion_xor_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(64),
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 		.platform_data          = &orion_xor1_pdata,
 	},
 };
-- 
2.19.1

[PATCH AUTOSEL 4.19 51/52] ARM: iop: don't use using 64-bit DMA masks

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 2125801ccce19249708ca3245d48998e70569ab8 ]

clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:

 arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
 static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
                                  ^~~~~~~~~~~~~~~~
 include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
                                                      ^ ~~~

The ones in iop shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-iop13xx/setup.c |  8 ++++----
 arch/arm/mach-iop13xx/tpmi.c  | 10 +++++-----
 arch/arm/plat-iop/adma.c      |  6 +++---
 3 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 53c316f7301e..fe4932fda01d 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -300,7 +300,7 @@ static struct resource iop13xx_adma_2_resources[] = {
 	}
 };
 
-static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
+static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(32);
 static struct iop_adma_platform_data iop13xx_adma_0_data = {
 	.hw_id = 0,
 	.pool_size = PAGE_SIZE,
@@ -324,7 +324,7 @@ static struct platform_device iop13xx_adma_0_channel = {
 	.resource = iop13xx_adma_0_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_0_data,
 	},
 };
@@ -336,7 +336,7 @@ static struct platform_device iop13xx_adma_1_channel = {
 	.resource = iop13xx_adma_1_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_1_data,
 	},
 };
@@ -348,7 +348,7 @@ static struct platform_device iop13xx_adma_2_channel = {
 	.resource = iop13xx_adma_2_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_2_data,
 	},
 };
diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c
index db511ec2b1df..116feb6b261e 100644
--- a/arch/arm/mach-iop13xx/tpmi.c
+++ b/arch/arm/mach-iop13xx/tpmi.c
@@ -152,7 +152,7 @@ static struct resource iop13xx_tpmi_3_resources[] = {
 	}
 };
 
-u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64);
+u64 iop13xx_tpmi_mask = DMA_BIT_MASK(32);
 static struct platform_device iop13xx_tpmi_0_device = {
 	.name = "iop-tpmi",
 	.id = 0,
@@ -160,7 +160,7 @@ static struct platform_device iop13xx_tpmi_0_device = {
 	.resource = iop13xx_tpmi_0_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -171,7 +171,7 @@ static struct platform_device iop13xx_tpmi_1_device = {
 	.resource = iop13xx_tpmi_1_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -182,7 +182,7 @@ static struct platform_device iop13xx_tpmi_2_device = {
 	.resource = iop13xx_tpmi_2_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -193,7 +193,7 @@ static struct platform_device iop13xx_tpmi_3_device = {
 	.resource = iop13xx_tpmi_3_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index a4d1f8de3b5b..d9612221e484 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -143,7 +143,7 @@ struct platform_device iop3xx_dma_0_channel = {
 	.resource = iop3xx_dma_0_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_dma_0_data,
 	},
 };
@@ -155,7 +155,7 @@ struct platform_device iop3xx_dma_1_channel = {
 	.resource = iop3xx_dma_1_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_dma_1_data,
 	},
 };
@@ -167,7 +167,7 @@ struct platform_device iop3xx_aau_channel = {
 	.resource = iop3xx_aau_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_aau_data,
 	},
 };
-- 
2.19.1

[PATCH AUTOSEL 4.19 52/52] aio: fold lookup_kiocb() into its sole caller

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 833f4154ed560232120bc475935ee1d6a20e159f ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/aio.c | 29 +++++++----------------------
 1 file changed, 7 insertions(+), 22 deletions(-)

diff --git a/fs/aio.c b/fs/aio.c
index 45d5ef8dd0a8..9c3115fa4c71 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1973,24 +1973,6 @@ COMPAT_SYSCALL_DEFINE3(io_submit, compat_aio_context_t, ctx_id,
 }
 #endif
 
-/* lookup_kiocb
- *	Finds a given iocb for cancellation.
- */
-static struct aio_kiocb *
-lookup_kiocb(struct kioctx *ctx, struct iocb __user *iocb)
-{
-	struct aio_kiocb *kiocb;
-
-	assert_spin_locked(&ctx->ctx_lock);
-
-	/* TODO: use a hash or array, this sucks. */
-	list_for_each_entry(kiocb, &ctx->active_reqs, ki_list) {
-		if (kiocb->ki_user_iocb == iocb)
-			return kiocb;
-	}
-	return NULL;
-}
-
 /* sys_io_cancel:
  *	Attempts to cancel an iocb previously passed to io_submit.  If
  *	the operation is successfully cancelled, the resulting event is
@@ -2019,10 +2001,13 @@ SYSCALL_DEFINE3(io_cancel, aio_context_t, ctx_id, struct iocb __user *, iocb,
 		return -EINVAL;
 
 	spin_lock_irq(&ctx->ctx_lock);
-	kiocb = lookup_kiocb(ctx, iocb);
-	if (kiocb) {
-		ret = kiocb->ki_cancel(&kiocb->rw);
-		list_del_init(&kiocb->ki_list);
+	/* TODO: use a hash or array, this sucks. */
+	list_for_each_entry(kiocb, &ctx->active_reqs, ki_list) {
+		if (kiocb->ki_user_iocb == iocb) {
+			ret = kiocb->ki_cancel(&kiocb->rw);
+			list_del_init(&kiocb->ki_list);
+			break;
+		}
 	}
 	spin_unlock_irq(&ctx->ctx_lock);
 
-- 
2.19.1