From: Chuanhua Han <chuanhua.han@nxp.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
s.hauer@pengutronix.de, leoyang.li@nxp.com
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
kernel@pengutronix.de, linux-imx@nxp.com, festevam@gmail.com,
wsa+renesas@sang-engineering.com, u.kleine-koenig@pengutronix.de,
eha@deif.com, linux@rempel-privat.de, sumit.batra@nxp.com,
l.stach@pengutronix.de, peda@axentia.se,
Chuanhua Han <chuanhua.han@nxp.com>
Subject: [PATCH 2/3] i2c: imx: I2C Driver IBC and SCL Divider for MUL=2 and MUL=4
Date: Tue, 30 Apr 2019 12:32:41 +0800 [thread overview]
Message-ID: <20190430043242.29687-2-chuanhua.han@nxp.com> (raw)
In-Reply-To: <20190430043242.29687-1-chuanhua.han@nxp.com>
NXP Layerscape SoC have up to three MUL options available for all
divider values,we choice of MUL determines the internal monitor rate
of the I2C bus (SCL and SDA signals).
The current kernel driver supports MUL=1 by default ,but doesn't have
the IBC and SCL Divider entries in vf610_i2c_clk_div for MUL=2 and
MUL=4,so we need to add the corresponding support.
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
---
drivers/i2c/busses/i2c-imx.c | 71 +++++++++++++++++++++++++++++++++++-
1 file changed, 69 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 42fed40198a0..ac5a334b7339 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -38,6 +38,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
+#include <linux/of_address.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/i2c-imx.h>
#include <linux/platform_device.h>
@@ -156,6 +157,44 @@ static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
{ 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
};
+static struct imx_i2c_clk_pair mul2_i2c_clk_div[] = {
+ { 40, 0x40 }, { 44, 0x41 }, { 48, 0x42 }, { 52, 0x43 },
+ { 56, 0x44 }, { 60, 0x45 }, { 68, 0x46 }, { 80, 0x47 },
+ { 56, 0x48 }, { 64, 0x49 }, { 72, 0x4A }, { 80, 0x4B },
+ { 88, 0x4C }, { 96, 0x4D }, { 112, 0x4E }, { 136, 0x4F },
+ { 96, 0x50 }, { 112, 0x51 }, { 128, 0x52 }, { 144, 0x53 },
+ { 160, 0x54 }, { 176, 0x55 }, { 208, 0x56 }, { 256, 0x57 },
+ { 160, 0x58 }, { 192, 0x59 }, { 224, 0x5A }, { 256, 0x5B },
+ { 288, 0x5C }, { 320, 0x5D }, { 384, 0x5E }, { 480, 0x5F },
+ { 320, 0x60 }, { 384, 0x61 }, { 448, 0x62 }, { 512, 0x63 },
+ { 576, 0x64 }, { 640, 0x65 }, { 768, 0x66 }, { 960, 0x67 },
+ { 640, 0x68 }, { 768, 0x69 }, { 896, 0x6A }, { 1024, 0x6B },
+ { 1152, 0x6C }, { 1280, 0x6D }, { 1536, 0x6E }, { 1920, 0x6F },
+ { 1280, 0x70 }, { 1536, 0x71 }, { 1792, 0x72 }, { 2048, 0x73 },
+ { 2304, 0x74 }, { 2560, 0x75 }, { 3072, 0x76 }, { 3840, 0x77 },
+ { 2560, 0x78 }, { 3072, 0x79 }, { 3584, 0x7A }, { 4096, 0x7B },
+ { 4608, 0x7C }, { 5120, 0x7D }, { 6144, 0x7E }, { 7680, 0x7F },
+};
+
+static struct imx_i2c_clk_pair mul4_i2c_clk_div[] = {
+ { 80, 0x80 }, { 88, 0x81 }, { 96, 0x82 }, { 104, 0x83 },
+ { 112, 0x84 }, { 120, 0x85 }, { 136, 0x86 }, { 160, 0x87 },
+ { 112, 0x88 }, { 128, 0x89 }, { 144, 0x8A }, { 160, 0x8B },
+ { 176, 0x8C }, { 192, 0x8D }, { 224, 0x8E }, { 272, 0x8F },
+ { 192, 0x90 }, { 224, 0x91 }, { 256, 0x92 }, { 288, 0x93 },
+ { 320, 0x94 }, { 352, 0x95 }, { 416, 0x96 }, { 512, 0x97 },
+ { 320, 0x98 }, { 384, 0x99 }, { 448, 0x9A }, { 512, 0x9B },
+ { 576, 0x9C }, { 640, 0x9D }, { 768, 0x9E }, { 960, 0x9F },
+ { 640, 0xA0 }, { 768, 0xA1 }, { 896, 0xA2 }, { 1024, 0xA3 },
+ { 1152, 0xA4 }, { 1280, 0xA5 }, { 1536, 0xA6 }, { 1792, 0xAA },
+ { 1280, 0xA8 }, { 1536, 0xA9 }, { 1920, 0xA7 }, { 2048, 0xAB },
+ { 2304, 0xAC }, { 2560, 0xAD }, { 3072, 0xAE }, { 3584, 0xB2 },
+ { 2560, 0xB0 }, { 3072, 0xB1 }, { 3820, 0xAF }, { 4096, 0xB3 },
+ { 4608, 0xB4 }, { 5120, 0xB5 }, { 6144, 0xB6 }, { 7680, 0xB7 },
+ { 5120, 0xB8 }, { 6144, 0xB9 }, { 7168, 0xBA }, { 8192, 0xBB },
+ { 9216, 0xBC }, { 10240, 0xBD }, { 12288, 0xBE }, { 15360, 0xBF },
+};
+
enum imx_i2c_type {
IMX1_I2C,
IMX21_I2C,
@@ -234,6 +273,24 @@ static struct imx_i2c_hwdata vf610_i2c_hwdata = {
};
+static struct imx_i2c_hwdata mul2_i2c_hwdata = {
+ .devtype = VF610_I2C,
+ .regshift = VF610_I2C_REGSHIFT,
+ .clk_div = mul2_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(mul2_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
+};
+
+static struct imx_i2c_hwdata mul4_i2c_hwdata = {
+ .devtype = VF610_I2C,
+ .regshift = VF610_I2C_REGSHIFT,
+ .clk_div = mul4_i2c_clk_div,
+ .ndivs = ARRAY_SIZE(mul4_i2c_clk_div),
+ .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
+ .i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
+};
+
static const struct platform_device_id imx_i2c_devtype[] = {
{
.name = "imx1-i2c",
@@ -1058,6 +1115,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
void __iomem *base;
int irq, ret;
dma_addr_t phy_addr;
+ u32 mul_value;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -1077,11 +1135,20 @@ static int i2c_imx_probe(struct platform_device *pdev)
if (!i2c_imx)
return -ENOMEM;
- if (of_id)
+ if (of_id) {
i2c_imx->hwdata = of_id->data;
- else
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "mul-value", &mul_value);
+ if (!ret) {
+ if (mul_value == 2)
+ i2c_imx->hwdata = &mul2_i2c_hwdata;
+ else if (mul_value == 4)
+ i2c_imx->hwdata = &mul4_i2c_hwdata;
+ }
+ } else {
i2c_imx->hwdata = (struct imx_i2c_hwdata *)
platform_get_device_id(pdev)->driver_data;
+ }
/* Setup i2c_imx driver structure */
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
--
2.17.1
next prev parent reply other threads:[~2019-04-30 4:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-30 4:32 [PATCH 1/3] dt-bindings: i2c: add optional mul-value property to binding Chuanhua Han
2019-04-30 4:32 ` Chuanhua Han [this message]
2019-04-30 4:32 ` [PATCH 3/3] arm64: dts: fsl: ls1046a: Add mul-value property of the i2c controller nodes Chuanhua Han
2019-04-30 6:38 ` [PATCH 1/3] dt-bindings: i2c: add optional mul-value property to binding Uwe Kleine-König
2019-04-30 6:56 ` [EXT] " Chuanhua Han
2019-05-02 20:59 ` Rob Herring
2019-05-07 8:40 ` Wolfram Sang
2019-05-08 11:44 ` [EXT] " Chuanhua Han
2019-05-08 18:53 ` Leo Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190430043242.29687-2-chuanhua.han@nxp.com \
--to=chuanhua.han@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=eha@deif.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=mark.rutland@arm.com \
--cc=peda@axentia.se \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=sumit.batra@nxp.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).