* [PATCH V6 2/3] ASoC: fsl_asrc: replace the process_option table with function
2019-04-22 4:51 [PATCH V6 0/3] Support more sample rate in asrc S.j. Wang
2019-04-22 4:52 ` [PATCH V6 1/3] ASoC: fsl_asrc: Fix the issue about unsupported rate S.j. Wang
@ 2019-04-22 4:52 ` S.j. Wang
2019-04-22 4:52 ` [PATCH V6 3/3] ASoC: fsl_asrc: Unify the supported input and output rate S.j. Wang
2 siblings, 0 replies; 5+ messages in thread
From: S.j. Wang @ 2019-04-22 4:52 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, alsa-devel
Cc: linuxppc-dev, linux-kernel
When we want to support more sample rate, for example 12kHz/24kHz
we need update the process_option table, if we want to support more
sample rate next time, the table need to be updated again. which
is not flexible.
We got a function fsl_asrc_sel_proc to replace the table, which can
give the pre-processing and post-processing options according to
the sample rate.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
sound/soc/fsl/fsl_asrc.c | 71 ++++++++++++++++++++++++++++++++++--------------
1 file changed, 51 insertions(+), 20 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index ea035c12a325..a8d6710f2541 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -26,24 +26,6 @@
#define pair_dbg(fmt, ...) \
dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
-/* Sample rates are aligned with that defined in pcm.h file */
-static const u8 process_option[][12][2] = {
- /* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
- {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
- {{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
- {{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
- {{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
- {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
- {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
-};
-
/* Corresponding to process_option */
static int supported_input_rate[] = {
5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200,
@@ -80,6 +62,52 @@
static unsigned char *clk_map[2];
/**
+ * Select the pre-processing and post-processing options
+ * Make sure to exclude following unsupported cases before
+ * calling this function:
+ * 1) inrate > 8.125 * outrate
+ * 2) inrate > 16.125 * outrate
+ *
+ * inrate: input sample rate
+ * outrate: output sample rate
+ * pre_proc: return value for pre-processing option
+ * post_proc: return value for post-processing option
+ */
+static void fsl_asrc_sel_proc(int inrate, int outrate,
+ int *pre_proc, int *post_proc)
+{
+ bool post_proc_cond2;
+ bool post_proc_cond0;
+
+ /* select pre_proc between [0, 2] */
+ if (inrate * 8 > 33 * outrate)
+ *pre_proc = 2;
+ else if (inrate * 8 > 15 * outrate) {
+ if (inrate > 152000)
+ *pre_proc = 2;
+ else
+ *pre_proc = 1;
+ } else if (inrate < 76000)
+ *pre_proc = 0;
+ else if (inrate > 152000)
+ *pre_proc = 2;
+ else
+ *pre_proc = 1;
+
+ /* Condition for selection of post-processing */
+ post_proc_cond2 = (inrate * 15 > outrate * 16 && outrate < 56000) ||
+ (inrate > 56000 && outrate < 56000);
+ post_proc_cond0 = inrate * 23 < outrate * 8;
+
+ if (post_proc_cond2)
+ *post_proc = 2;
+ else if (post_proc_cond0)
+ *post_proc = 0;
+ else
+ *post_proc = 1;
+}
+
+/**
* Request ASRC pair
*
* It assigns pair by the order of A->C->B because allocation of pair B,
@@ -239,6 +267,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
u32 inrate, outrate, indiv, outdiv;
u32 clk_index[2], div[2];
int in, out, channels;
+ int pre_proc, post_proc;
struct clk *clk;
bool ideal;
@@ -377,11 +406,13 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
ASRCTR_IDRi_MASK(index) | ASRCTR_USRi_MASK(index),
ASRCTR_IDR(index) | ASRCTR_USR(index));
+ fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc);
+
/* Apply configurations for pre- and post-processing */
regmap_update_bits(asrc_priv->regmap, REG_ASRCFG,
ASRCFG_PREMODi_MASK(index) | ASRCFG_POSTMODi_MASK(index),
- ASRCFG_PREMOD(index, process_option[in][out][0]) |
- ASRCFG_POSTMOD(index, process_option[in][out][1]));
+ ASRCFG_PREMOD(index, pre_proc) |
+ ASRCFG_POSTMOD(index, post_proc));
return fsl_asrc_set_ideal_ratio(pair, inrate, outrate);
}
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH V6 3/3] ASoC: fsl_asrc: Unify the supported input and output rate
2019-04-22 4:51 [PATCH V6 0/3] Support more sample rate in asrc S.j. Wang
2019-04-22 4:52 ` [PATCH V6 1/3] ASoC: fsl_asrc: Fix the issue about unsupported rate S.j. Wang
2019-04-22 4:52 ` [PATCH V6 2/3] ASoC: fsl_asrc: replace the process_option table with function S.j. Wang
@ 2019-04-22 4:52 ` S.j. Wang
2 siblings, 0 replies; 5+ messages in thread
From: S.j. Wang @ 2019-04-22 4:52 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, alsa-devel
Cc: linuxppc-dev, linux-kernel
Unify the supported input and output rate, add the
12kHz/24kHz/128kHz to the support list
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
sound/soc/fsl/fsl_asrc.c | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index a8d6710f2541..cbbf6257f08a 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -27,13 +27,14 @@
dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
/* Corresponding to process_option */
-static int supported_input_rate[] = {
- 5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200,
- 96000, 176400, 192000,
+static unsigned int supported_asrc_rate[] = {
+ 5512, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000,
+ 64000, 88200, 96000, 128000, 176400, 192000,
};
-static int supported_asrc_rate[] = {
- 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
+static struct snd_pcm_hw_constraint_list fsl_asrc_rate_constraints = {
+ .count = ARRAY_SIZE(supported_asrc_rate),
+ .list = supported_asrc_rate,
};
/**
@@ -293,11 +294,11 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
ideal = config->inclk == INCLK_NONE;
/* Validate input and output sample rates */
- for (in = 0; in < ARRAY_SIZE(supported_input_rate); in++)
- if (inrate == supported_input_rate[in])
+ for (in = 0; in < ARRAY_SIZE(supported_asrc_rate); in++)
+ if (inrate == supported_asrc_rate[in])
break;
- if (in == ARRAY_SIZE(supported_input_rate)) {
+ if (in == ARRAY_SIZE(supported_asrc_rate)) {
pair_err("unsupported input sample rate: %dHz\n", inrate);
return -EINVAL;
}
@@ -311,7 +312,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
- if ((outrate >= 8000 && outrate <= 30000) &&
+ if ((outrate >= 5512 && outrate <= 30000) &&
(outrate > 24 * inrate || inrate > 8 * outrate)) {
pair_err("exceed supported ratio range [1/24, 8] for \
inrate/outrate: %d/%d\n", inrate, outrate);
@@ -486,7 +487,9 @@ static int fsl_asrc_dai_startup(struct snd_pcm_substream *substream,
snd_pcm_hw_constraint_step(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS, 2);
- return 0;
+
+ return snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE, &fsl_asrc_rate_constraints);
}
static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
@@ -599,7 +602,6 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
return 0;
}
-#define FSL_ASRC_RATES SNDRV_PCM_RATE_8000_192000
#define FSL_ASRC_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S20_3LE)
@@ -610,14 +612,18 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
.stream_name = "ASRC-Playback",
.channels_min = 1,
.channels_max = 10,
- .rates = FSL_ASRC_RATES,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
.formats = FSL_ASRC_FORMATS,
},
.capture = {
.stream_name = "ASRC-Capture",
.channels_min = 1,
.channels_max = 10,
- .rates = FSL_ASRC_RATES,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
.formats = FSL_ASRC_FORMATS,
},
.ops = &fsl_asrc_dai_ops,
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread