[PATCH 1/3] regulator: arizona: Update device tree binding to support Madera CODECs

[PATCH 1/3] regulator: arizona: Update device tree binding to support Madera CODECs

[Charles Keepax]

The Arizona regulator drivers are now also used by the Cirrus Logic
Madera audio CODECs, update the binding document to link to the primary
binding document for these as well as the existing Arizona document.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 Documentation/devicetree/bindings/regulator/arizona-regulator.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
index 443564d7784fd..69bf41949b01f 100644
--- a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
@@ -5,7 +5,8 @@ of analogue I/O.
 
 This document lists regulator specific bindings, see the primary binding
 document:
-  ../mfd/arizona.txt
+  For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt
+  For Cirrus Logic Madera codecs: ../mfd/madera.txt
 
 Optional properties:
   - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
-- 
2.11.0

[PATCH 2/3] regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs

[Charles Keepax]

From: Richard Fitzgerald <rf@opensource.cirrus.com>

This adds a new driver identity "madera-ldo1" and probe function
so that this driver can be used to control the LDO1 regulator on
some Cirrus Logic Madera codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 drivers/regulator/Kconfig        |  8 ++--
 drivers/regulator/arizona-ldo1.c | 83 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 86 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6c37f0df93232..d2db658840f47 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -135,12 +135,12 @@ config REGULATOR_AB8500
 	  signal AB8500 PMIC
 
 config REGULATOR_ARIZONA_LDO1
-	tristate "Wolfson Arizona class devices LDO1"
-	depends on MFD_ARIZONA
+	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
+	depends on MFD_ARIZONA || MFD_MADERA
 	depends on SND_SOC
 	help
-	  Support for the LDO1 regulators found on Wolfson Arizona class
-	  devices.
+	  Support for the LDO1 regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Microelectronic Arizona codecs.
 
 config REGULATOR_ARIZONA_MICSUPP
 	tristate "Wolfson Arizona class devices MICSUPP"
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index e4bc7b1e5ccdd..1a3d7b720f5e0 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -25,6 +25,10 @@
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
 
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/mfd/madera/registers.h>
+
 struct arizona_ldo1 {
 	struct regulator_dev *regulator;
 	struct regmap *regmap;
@@ -158,6 +162,31 @@ static const struct regulator_init_data arizona_ldo1_wm5110 = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_desc madera_ldo1 = {
+	.name = "LDO1",
+	.supply_name = "LDOVDD",
+	.type = REGULATOR_VOLTAGE,
+	.ops = &arizona_ldo1_ops,
+
+	.vsel_reg = MADERA_LDO1_CONTROL_1,
+	.vsel_mask = MADERA_LDO1_VSEL_MASK,
+	.min_uV = 900000,
+	.uV_step = 25000,
+	.n_voltages = 13,
+	.enable_time = 3000,
+
+	.owner = THIS_MODULE,
+};
+
+static const struct regulator_init_data madera_ldo1_default = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+};
+
 static int arizona_ldo1_of_get_pdata(struct arizona_ldo1_pdata *pdata,
 				     struct regulator_config *config,
 				     const struct regulator_desc *desc,
@@ -320,6 +349,32 @@ static int arizona_ldo1_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int madera_ldo1_probe(struct platform_device *pdev)
+{
+	struct madera *madera = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_ldo1 *ldo1;
+	bool external_dcvdd;
+	int ret;
+
+	ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
+	if (!ldo1)
+		return -ENOMEM;
+
+	ldo1->regmap = madera->regmap;
+
+	ldo1->init_data = madera_ldo1_default;
+
+	ret = arizona_ldo1_common_init(pdev, ldo1, &madera_ldo1,
+				       &madera->pdata.ldo1,
+				       &external_dcvdd);
+	if (ret)
+		return ret;
+
+	madera->internal_dcvdd = !external_dcvdd;
+
+	return 0;
+}
+
 static struct platform_driver arizona_ldo1_driver = {
 	.probe = arizona_ldo1_probe,
 	.remove = arizona_ldo1_remove,
@@ -328,10 +383,36 @@ static struct platform_driver arizona_ldo1_driver = {
 	},
 };
 
-module_platform_driver(arizona_ldo1_driver);
+static struct platform_driver madera_ldo1_driver = {
+	.probe = madera_ldo1_probe,
+	.remove = arizona_ldo1_remove,
+	.driver		= {
+		.name	= "madera-ldo1",
+	},
+};
+
+static struct platform_driver * const madera_ldo1_drivers[] = {
+	&arizona_ldo1_driver,
+	&madera_ldo1_driver,
+};
+
+static int __init arizona_ldo1_init(void)
+{
+	return platform_register_drivers(madera_ldo1_drivers,
+					 ARRAY_SIZE(madera_ldo1_drivers));
+}
+module_init(arizona_ldo1_init);
+
+static void __exit madera_ldo1_exit(void)
+{
+	platform_unregister_drivers(madera_ldo1_drivers,
+				    ARRAY_SIZE(madera_ldo1_drivers));
+}
+module_exit(madera_ldo1_exit);
 
 /* Module information */
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Arizona LDO1 driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:arizona-ldo1");
+MODULE_ALIAS("platform:madera-ldo1");
-- 
2.11.0

[PATCH 3/3] regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs

[Charles Keepax]

From: Richard Fitzgerald <rf@opensource.cirrus.com>

This adds a new driver identity "madera-micsupp" and probe function
so that this driver can be used to control the micsupp regulator on
Cirrus Logic Madera codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 drivers/regulator/Kconfig           |  7 ++--
 drivers/regulator/arizona-micsupp.c | 71 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 74 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index d2db658840f47..53576c2df737b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -143,11 +143,12 @@ config REGULATOR_ARIZONA_LDO1
 	  and Wolfson Microelectronic Arizona codecs.
 
 config REGULATOR_ARIZONA_MICSUPP
-	tristate "Wolfson Arizona class devices MICSUPP"
-	depends on MFD_ARIZONA
+	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
+	depends on MFD_ARIZONA || MFD_MADERA
 	depends on SND_SOC
 	help
-	  Support for the MICSUPP regulators found on Wolfson Arizona class
+	  Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Microelectronic Arizona codecs
 	  devices.
 
 config REGULATOR_AS3711
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index be0d46da51a14..de6802b85e9f9 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -25,6 +25,10 @@
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
 
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/mfd/madera/registers.h>
+
 #include <linux/regulator/arizona-micsupp.h>
 
 struct arizona_micsupp {
@@ -200,6 +204,28 @@ static const struct regulator_init_data arizona_micsupp_ext_default = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_desc madera_micsupp = {
+	.name = "MICVDD",
+	.supply_name = "CPVDD1",
+	.type = REGULATOR_VOLTAGE,
+	.n_voltages = 40,
+	.ops = &arizona_micsupp_ops,
+
+	.vsel_reg = MADERA_LDO2_CONTROL_1,
+	.vsel_mask = MADERA_LDO2_VSEL_MASK,
+	.enable_reg = MADERA_MIC_CHARGE_PUMP_1,
+	.enable_mask = MADERA_CPMIC_ENA,
+	.bypass_reg = MADERA_MIC_CHARGE_PUMP_1,
+	.bypass_mask = MADERA_CPMIC_BYPASS,
+
+	.linear_ranges = arizona_micsupp_ext_ranges,
+	.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
+	.enable_time = 3000,
+
+	.owner = THIS_MODULE,
+};
+
 static int arizona_micsupp_of_get_pdata(struct arizona_micsupp_pdata *pdata,
 					struct regulator_config *config,
 					const struct regulator_desc *desc)
@@ -316,6 +342,24 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 					   &arizona->pdata.micvdd);
 }
 
+static int madera_micsupp_probe(struct platform_device *pdev)
+{
+	struct madera *madera = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_micsupp *micsupp;
+
+	micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL);
+	if (!micsupp)
+		return -ENOMEM;
+
+	micsupp->regmap = madera->regmap;
+	micsupp->dapm = &madera->dapm;
+	micsupp->dev = madera->dev;
+	micsupp->init_data = arizona_micsupp_ext_default;
+
+	return arizona_micsupp_common_init(pdev, micsupp, &madera_micsupp,
+					   &madera->pdata.micvdd);
+}
+
 static struct platform_driver arizona_micsupp_driver = {
 	.probe = arizona_micsupp_probe,
 	.driver		= {
@@ -323,10 +367,35 @@ static struct platform_driver arizona_micsupp_driver = {
 	},
 };
 
-module_platform_driver(arizona_micsupp_driver);
+static struct platform_driver madera_micsupp_driver = {
+	.probe = madera_micsupp_probe,
+	.driver		= {
+		.name	= "madera-micsupp",
+	},
+};
+
+static struct platform_driver * const arizona_micsupp_drivers[] = {
+	&arizona_micsupp_driver,
+	&madera_micsupp_driver,
+};
+
+static int __init arizona_micsupp_init(void)
+{
+	return platform_register_drivers(arizona_micsupp_drivers,
+					 ARRAY_SIZE(arizona_micsupp_drivers));
+}
+module_init(arizona_micsupp_init);
+
+static void __exit arizona_micsupp_exit(void)
+{
+	platform_unregister_drivers(arizona_micsupp_drivers,
+				    ARRAY_SIZE(arizona_micsupp_drivers));
+}
+module_exit(arizona_micsupp_exit);
 
 /* Module information */
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Arizona microphone supply driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:arizona-micsupp");
+MODULE_ALIAS("platform:madera-micsupp");
-- 
2.11.0

Applied "regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs" to the regulator tree

[Mark Brown]

The patch

   regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 1f5f11e7370c6a55da1a37351b0cfb5f86f0cb6d Mon Sep 17 00:00:00 2001
From: Richard Fitzgerald <rf@opensource.cirrus.com>
Date: Tue, 21 May 2019 11:04:38 +0100
Subject: [PATCH] regulator: arizona-ldo1: Add support for Cirrus Logic Madera
 codecs

This adds a new driver identity "madera-ldo1" and probe function
so that this driver can be used to control the LDO1 regulator on
some Cirrus Logic Madera codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig        |  8 +--
 drivers/regulator/arizona-ldo1.c | 83 +++++++++++++++++++++++++++++++-
 2 files changed, 86 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5e3a9e6547b0..5827aace014b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -135,12 +135,12 @@ config REGULATOR_AB8500
 	  signal AB8500 PMIC
 
 config REGULATOR_ARIZONA_LDO1
-	tristate "Wolfson Arizona class devices LDO1"
-	depends on MFD_ARIZONA
+	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
+	depends on MFD_ARIZONA || MFD_MADERA
 	depends on SND_SOC
 	help
-	  Support for the LDO1 regulators found on Wolfson Arizona class
-	  devices.
+	  Support for the LDO1 regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Microelectronic Arizona codecs.
 
 config REGULATOR_ARIZONA_MICSUPP
 	tristate "Wolfson Arizona class devices MICSUPP"
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index e4bc7b1e5ccd..1a3d7b720f5e 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -25,6 +25,10 @@
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
 
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/mfd/madera/registers.h>
+
 struct arizona_ldo1 {
 	struct regulator_dev *regulator;
 	struct regmap *regmap;
@@ -158,6 +162,31 @@ static const struct regulator_init_data arizona_ldo1_wm5110 = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_desc madera_ldo1 = {
+	.name = "LDO1",
+	.supply_name = "LDOVDD",
+	.type = REGULATOR_VOLTAGE,
+	.ops = &arizona_ldo1_ops,
+
+	.vsel_reg = MADERA_LDO1_CONTROL_1,
+	.vsel_mask = MADERA_LDO1_VSEL_MASK,
+	.min_uV = 900000,
+	.uV_step = 25000,
+	.n_voltages = 13,
+	.enable_time = 3000,
+
+	.owner = THIS_MODULE,
+};
+
+static const struct regulator_init_data madera_ldo1_default = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+};
+
 static int arizona_ldo1_of_get_pdata(struct arizona_ldo1_pdata *pdata,
 				     struct regulator_config *config,
 				     const struct regulator_desc *desc,
@@ -320,6 +349,32 @@ static int arizona_ldo1_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int madera_ldo1_probe(struct platform_device *pdev)
+{
+	struct madera *madera = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_ldo1 *ldo1;
+	bool external_dcvdd;
+	int ret;
+
+	ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
+	if (!ldo1)
+		return -ENOMEM;
+
+	ldo1->regmap = madera->regmap;
+
+	ldo1->init_data = madera_ldo1_default;
+
+	ret = arizona_ldo1_common_init(pdev, ldo1, &madera_ldo1,
+				       &madera->pdata.ldo1,
+				       &external_dcvdd);
+	if (ret)
+		return ret;
+
+	madera->internal_dcvdd = !external_dcvdd;
+
+	return 0;
+}
+
 static struct platform_driver arizona_ldo1_driver = {
 	.probe = arizona_ldo1_probe,
 	.remove = arizona_ldo1_remove,
@@ -328,10 +383,36 @@ static struct platform_driver arizona_ldo1_driver = {
 	},
 };
 
-module_platform_driver(arizona_ldo1_driver);
+static struct platform_driver madera_ldo1_driver = {
+	.probe = madera_ldo1_probe,
+	.remove = arizona_ldo1_remove,
+	.driver		= {
+		.name	= "madera-ldo1",
+	},
+};
+
+static struct platform_driver * const madera_ldo1_drivers[] = {
+	&arizona_ldo1_driver,
+	&madera_ldo1_driver,
+};
+
+static int __init arizona_ldo1_init(void)
+{
+	return platform_register_drivers(madera_ldo1_drivers,
+					 ARRAY_SIZE(madera_ldo1_drivers));
+}
+module_init(arizona_ldo1_init);
+
+static void __exit madera_ldo1_exit(void)
+{
+	platform_unregister_drivers(madera_ldo1_drivers,
+				    ARRAY_SIZE(madera_ldo1_drivers));
+}
+module_exit(madera_ldo1_exit);
 
 /* Module information */
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Arizona LDO1 driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:arizona-ldo1");
+MODULE_ALIAS("platform:madera-ldo1");
-- 
2.20.1

Applied "regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs" to the regulator tree

[Mark Brown]

The patch

   regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 7bd7916dc8ab5b056f1b53e19021e476120481c0 Mon Sep 17 00:00:00 2001
From: Richard Fitzgerald <rf@opensource.cirrus.com>
Date: Tue, 21 May 2019 11:04:39 +0100
Subject: [PATCH] regulator: arizona-micsupp: Add support for Cirrus Logic
 Madera codecs

This adds a new driver identity "madera-micsupp" and probe function
so that this driver can be used to control the micsupp regulator on
Cirrus Logic Madera codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/Kconfig           |  7 +--
 drivers/regulator/arizona-micsupp.c | 71 ++++++++++++++++++++++++++++-
 2 files changed, 74 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5827aace014b..660f3a1717ba 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -143,11 +143,12 @@ config REGULATOR_ARIZONA_LDO1
 	  and Wolfson Microelectronic Arizona codecs.
 
 config REGULATOR_ARIZONA_MICSUPP
-	tristate "Wolfson Arizona class devices MICSUPP"
-	depends on MFD_ARIZONA
+	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
+	depends on MFD_ARIZONA || MFD_MADERA
 	depends on SND_SOC
 	help
-	  Support for the MICSUPP regulators found on Wolfson Arizona class
+	  Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Microelectronic Arizona codecs
 	  devices.
 
 config REGULATOR_AS3711
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index be0d46da51a1..de6802b85e9f 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -25,6 +25,10 @@
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
 
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/mfd/madera/registers.h>
+
 #include <linux/regulator/arizona-micsupp.h>
 
 struct arizona_micsupp {
@@ -200,6 +204,28 @@ static const struct regulator_init_data arizona_micsupp_ext_default = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_desc madera_micsupp = {
+	.name = "MICVDD",
+	.supply_name = "CPVDD1",
+	.type = REGULATOR_VOLTAGE,
+	.n_voltages = 40,
+	.ops = &arizona_micsupp_ops,
+
+	.vsel_reg = MADERA_LDO2_CONTROL_1,
+	.vsel_mask = MADERA_LDO2_VSEL_MASK,
+	.enable_reg = MADERA_MIC_CHARGE_PUMP_1,
+	.enable_mask = MADERA_CPMIC_ENA,
+	.bypass_reg = MADERA_MIC_CHARGE_PUMP_1,
+	.bypass_mask = MADERA_CPMIC_BYPASS,
+
+	.linear_ranges = arizona_micsupp_ext_ranges,
+	.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
+	.enable_time = 3000,
+
+	.owner = THIS_MODULE,
+};
+
 static int arizona_micsupp_of_get_pdata(struct arizona_micsupp_pdata *pdata,
 					struct regulator_config *config,
 					const struct regulator_desc *desc)
@@ -316,6 +342,24 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
 					   &arizona->pdata.micvdd);
 }
 
+static int madera_micsupp_probe(struct platform_device *pdev)
+{
+	struct madera *madera = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_micsupp *micsupp;
+
+	micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL);
+	if (!micsupp)
+		return -ENOMEM;
+
+	micsupp->regmap = madera->regmap;
+	micsupp->dapm = &madera->dapm;
+	micsupp->dev = madera->dev;
+	micsupp->init_data = arizona_micsupp_ext_default;
+
+	return arizona_micsupp_common_init(pdev, micsupp, &madera_micsupp,
+					   &madera->pdata.micvdd);
+}
+
 static struct platform_driver arizona_micsupp_driver = {
 	.probe = arizona_micsupp_probe,
 	.driver		= {
@@ -323,10 +367,35 @@ static struct platform_driver arizona_micsupp_driver = {
 	},
 };
 
-module_platform_driver(arizona_micsupp_driver);
+static struct platform_driver madera_micsupp_driver = {
+	.probe = madera_micsupp_probe,
+	.driver		= {
+		.name	= "madera-micsupp",
+	},
+};
+
+static struct platform_driver * const arizona_micsupp_drivers[] = {
+	&arizona_micsupp_driver,
+	&madera_micsupp_driver,
+};
+
+static int __init arizona_micsupp_init(void)
+{
+	return platform_register_drivers(arizona_micsupp_drivers,
+					 ARRAY_SIZE(arizona_micsupp_drivers));
+}
+module_init(arizona_micsupp_init);
+
+static void __exit arizona_micsupp_exit(void)
+{
+	platform_unregister_drivers(arizona_micsupp_drivers,
+				    ARRAY_SIZE(arizona_micsupp_drivers));
+}
+module_exit(arizona_micsupp_exit);
 
 /* Module information */
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("Arizona microphone supply driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:arizona-micsupp");
+MODULE_ALIAS("platform:madera-micsupp");
-- 
2.20.1

Applied "regulator: arizona: Update device tree binding to support Madera CODECs" to the regulator tree

[Mark Brown]

The patch

   regulator: arizona: Update device tree binding to support Madera CODECs

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 46f4050a6587ea3e59e6f47f06513c00689b9d40 Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.cirrus.com>
Date: Tue, 21 May 2019 11:04:37 +0100
Subject: [PATCH] regulator: arizona: Update device tree binding to support
 Madera CODECs

The Arizona regulator drivers are now also used by the Cirrus Logic
Madera audio CODECs, update the binding document to link to the primary
binding document for these as well as the existing Arizona document.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 .../devicetree/bindings/regulator/arizona-regulator.txt        | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
index 443564d7784f..69bf41949b01 100644
--- a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
@@ -5,7 +5,8 @@ of analogue I/O.
 
 This document lists regulator specific bindings, see the primary binding
 document:
-  ../mfd/arizona.txt
+  For Wolfson Microelectronic Arizona codecs: ../mfd/arizona.txt
+  For Cirrus Logic Madera codecs: ../mfd/madera.txt
 
 Optional properties:
   - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
-- 
2.20.1