linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: grygorii.strashko@ti.com, hawk@kernel.org, davem@davemloft.net,
	ast@kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org, xdp-newbies@vger.kernel.org,
	ilias.apalodimas@linaro.org, netdev@vger.kernel.org,
	daniel@iogearbox.net, jakub.kicinski@netronome.com,
	john.fastabend@gmail.com
Subject: Re: [PATCH v2 net-next 7/7] net: ethernet: ti: cpsw: add XDP support
Date: Fri, 31 May 2019 19:25:24 +0300	[thread overview]
Message-ID: <20190531162523.GA3694@khorivan> (raw)
In-Reply-To: <20190531174643.4be8b27f@carbon>

On Fri, May 31, 2019 at 05:46:43PM +0200, Jesper Dangaard Brouer wrote:

Hi Jesper,

>
>Hi Ivan,
>
>From below code snippets, it looks like you only allocated 1 page_pool
>and sharing it with several RX-queues, as I don't have the full context
>and don't know this driver, I might be wrong?
>
>To be clear, a page_pool object is needed per RX-queue, as it is
>accessing a small RX page cache (which protected by NAPI/softirq).

There is one RX interrupt and one RX NAPI for all rx channels.

>
>On Thu, 30 May 2019 21:20:39 +0300
>Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> wrote:
>
>> @@ -1404,6 +1711,14 @@ static int cpsw_ndo_open(struct net_device *ndev)
>>  			enable_irq(cpsw->irqs_table[0]);
>>  		}
>>
>> +		pool_size = cpdma_get_num_rx_descs(cpsw->dma);
>> +		cpsw->page_pool = cpsw_create_page_pool(cpsw, pool_size);
>> +		if (IS_ERR(cpsw->page_pool)) {
>> +			ret = PTR_ERR(cpsw->page_pool);
>> +			cpsw->page_pool = NULL;
>> +			goto err_cleanup;
>> +		}
>
>On Thu, 30 May 2019 21:20:39 +0300
>Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> wrote:
>
>> @@ -675,10 +742,33 @@ int cpsw_set_ringparam(struct net_device *ndev,
>>  	if (cpsw->usage_count)
>>  		cpdma_chan_split_pool(cpsw->dma);
>>
>> +	for (i = 0; i < cpsw->data.slaves; i++) {
>> +		struct net_device *ndev = cpsw->slaves[i].ndev;
>> +
>> +		if (!(ndev && netif_running(ndev)))
>> +			continue;
>> +
>> +		cpsw_xdp_unreg_rxqs(netdev_priv(ndev));
>> +	}
>> +
>> +	page_pool_destroy(cpsw->page_pool);
>> +	cpsw->page_pool = pool;
>> +
>
>On Thu, 30 May 2019 21:20:39 +0300
>Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> wrote:
>
>> +void cpsw_xdp_unreg_rxqs(struct cpsw_priv *priv)
>> +{
>> +	struct cpsw_common *cpsw = priv->cpsw;
>> +	int i;
>> +
>> +	for (i = 0; i < cpsw->rx_ch_num; i++)
>> +		xdp_rxq_info_unreg(&priv->xdp_rxq[i]);
>> +}
>
>
>On Thu, 30 May 2019 21:20:39 +0300
>Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> wrote:
>
>> +int cpsw_xdp_reg_rxq(struct cpsw_priv *priv, int ch)
>> +{
>> +	struct xdp_rxq_info *xdp_rxq = &priv->xdp_rxq[ch];
>> +	struct cpsw_common *cpsw = priv->cpsw;
>> +	int ret;
>> +
>> +	ret = xdp_rxq_info_reg(xdp_rxq, priv->ndev, ch);
>> +	if (ret)
>> +		goto err_cleanup;
>> +
>> +	ret = xdp_rxq_info_reg_mem_model(xdp_rxq, MEM_TYPE_PAGE_POOL,
>> +					 cpsw->page_pool);
>> +	if (ret)
>> +		goto err_cleanup;
>> +
>> +	return 0;
>
>
>
>-- 
>Best regards,
>  Jesper Dangaard Brouer
>  MSc.CS, Principal Kernel Engineer at Red Hat
>  LinkedIn: http://www.linkedin.com/in/brouer

-- 
Regards,
Ivan Khoronzhuk

  reply	other threads:[~2019-05-31 16:25 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-30 18:20 [PATCH v2 net-next 0/7] net: ethernet: ti: cpsw: Add XDP support Ivan Khoronzhuk
2019-05-30 18:20 ` [PATCH v2 net-next 1/7] net: page_pool: add helper function to retrieve dma addresses Ivan Khoronzhuk
2019-05-30 18:20 ` [PATCH v2 net-next 2/7] net: page_pool: add helper function to unmap " Ivan Khoronzhuk
2019-05-30 18:20 ` [PATCH v2 net-next 3/7] net: ethernet: ti: cpsw: use cpsw as drv data Ivan Khoronzhuk
2019-06-01 10:49   ` grygorii
2019-05-30 18:20 ` [PATCH v2 net-next 4/7] net: ethernet: ti: cpsw_ethtool: simplify slave loops Ivan Khoronzhuk
2019-06-01 10:55   ` grygorii
2019-05-30 18:20 ` [PATCH v2 net-next 5/7] net: ethernet: ti: davinci_cpdma: add dma mapped submit Ivan Khoronzhuk
2019-05-30 18:20 ` [PATCH v2 net-next 6/7] net: ethernet: ti: davinci_cpdma: return handler status Ivan Khoronzhuk
2019-05-30 18:20 ` [PATCH v2 net-next 7/7] net: ethernet: ti: cpsw: add XDP support Ivan Khoronzhuk
2019-05-31 15:46   ` Jesper Dangaard Brouer
2019-05-31 16:25     ` Ivan Khoronzhuk [this message]
2019-05-31 16:32       ` Jesper Dangaard Brouer
2019-05-31 17:03         ` Ivan Khoronzhuk
2019-05-31 22:08           ` Saeed Mahameed
2019-05-31 23:00             ` Ivan Khoronzhuk
2019-05-31 22:37           ` Jesper Dangaard Brouer
2019-05-31 23:27             ` Ivan Khoronzhuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190531162523.GA3694@khorivan \
    --to=ivan.khoronzhuk@linaro.org \
    --cc=ast@kernel.org \
    --cc=brouer@redhat.com \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=grygorii.strashko@ti.com \
    --cc=hawk@kernel.org \
    --cc=ilias.apalodimas@linaro.org \
    --cc=jakub.kicinski@netronome.com \
    --cc=john.fastabend@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=xdp-newbies@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).