[PATCH] media: platform: ao-cec-g12a: remove spin_lock_irqsave() locking in meson_ao_cec_g12a_read/write

[PATCH] media: platform: ao-cec-g12a: remove spin_lock_irqsave() locking in meson_ao_cec_g12a_read/write

[Neil Armstrong]

Since locking is handled by regmap, the spin_lock_irqsave() in the
meson_ao_cec_g12a_read/write() regmap callbacks is not needed.

Fixes: b7778c46683c ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/media/platform/meson/ao-cec-g12a.c | 20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/meson/ao-cec-g12a.c b/drivers/media/platform/meson/ao-cec-g12a.c
index ddfd060625da..fb52e5dd044a 100644
--- a/drivers/media/platform/meson/ao-cec-g12a.c
+++ b/drivers/media/platform/meson/ao-cec-g12a.c
@@ -365,28 +365,22 @@ static int meson_ao_cec_g12a_read(void *context, unsigned int addr,
 {
 	struct meson_ao_cec_g12a_device *ao_cec = context;
 	u32 reg = FIELD_PREP(CECB_RW_ADDR, addr);
-	unsigned long flags;
 	int ret = 0;
 
-	spin_lock_irqsave(&ao_cec->cec_reg_lock, flags);
-
 	ret = regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
 	if (ret)
-		goto read_out;
+		return ret;
 
 	ret = regmap_read_poll_timeout(ao_cec->regmap, CECB_RW_REG, reg,
 				       !(reg & CECB_RW_BUS_BUSY),
 				       5, 1000);
 	if (ret)
-		goto read_out;
+		return ret;
 
 	ret = regmap_read(ao_cec->regmap, CECB_RW_REG, &reg);
 
 	*data = FIELD_GET(CECB_RW_RD_DATA, reg);
 
-read_out:
-	spin_unlock_irqrestore(&ao_cec->cec_reg_lock, flags);
-
 	return ret;
 }
 
@@ -394,19 +388,11 @@ static int meson_ao_cec_g12a_write(void *context, unsigned int addr,
 				   unsigned int data)
 {
 	struct meson_ao_cec_g12a_device *ao_cec = context;
-	unsigned long flags;
 	u32 reg = FIELD_PREP(CECB_RW_ADDR, addr) |
 		  FIELD_PREP(CECB_RW_WR_DATA, data) |
 		  CECB_RW_WRITE_EN;
-	int ret = 0;
 
-	spin_lock_irqsave(&ao_cec->cec_reg_lock, flags);
-
-	ret = regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
-
-	spin_unlock_irqrestore(&ao_cec->cec_reg_lock, flags);
-
-	return ret;
+	return regmap_write(ao_cec->regmap, CECB_RW_REG, reg);
 }
 
 static const struct regmap_config meson_ao_cec_g12a_cec_regmap_conf = {
-- 
2.21.0

Re: [PATCH] media: platform: ao-cec-g12a: remove spin_lock_irqsave() locking in meson_ao_cec_g12a_read/write

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> Since locking is handled by regmap, the spin_lock_irqsave() in the
> meson_ao_cec_g12a_read/write() regmap callbacks is not needed.
>
> Fixes: b7778c46683c ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Tested-by: Kevin Hilman <khilman@baylibre.com>