linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] irqchip: Enable compile-testing for Renesas drivers
@ 2019-06-07  9:50 Geert Uytterhoeven
  2019-06-10  6:52 ` Yoshinori Sato
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Geert Uytterhoeven @ 2019-06-07  9:50 UTC (permalink / raw)
  To: Thomas Gleixner, Jason Cooper, Marc Zyngier
  Cc: Yoshinori Sato, linux-renesas-soc, uclinux-h8-devel,
	linux-kernel, Geert Uytterhoeven

Enable compile-testing for all Renesas interrupt controller drivers,
except for RENESAS_H8300H_INTC.  The latter relies on a function
(ctrl_bclr()) that is not available on other architectures.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/irqchip/Kconfig | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 2d3b5a27cc988ab6..fe509b88f99a8f10 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -217,17 +217,26 @@ config RDA_INTC
 	select IRQ_DOMAIN
 
 config RENESAS_INTC_IRQPIN
-	bool
+	bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
 	select IRQ_DOMAIN
+	help
+	  Enable support for the Renesas Interrupt Controller for external
+	  interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
 
 config RENESAS_IRQC
-	bool
+	bool "Renesas R-Mobile APE6 and R-Car IRQC support" if COMPILE_TEST
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
+	help
+	  Enable support for the Renesas Interrupt Controller for external
+	  devices, as found on R-Mobile APE6, R-Car Gen2, and R-Car Gen3 SoCs.
 
 config RENESAS_RZA1_IRQC
-	bool
+	bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
 	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
+	  to 8 external interrupts with configurable sense select.
 
 config ST_IRQCHIP
 	bool
@@ -303,8 +312,11 @@ config RENESAS_H8300H_INTC
 	select IRQ_DOMAIN
 
 config RENESAS_H8S_INTC
-        bool
+	bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
 	select IRQ_DOMAIN
+	help
+	  Enable support for the Renesas H8/300 Interrupt Controller, as found
+	  on Renesas H8S SoCs.
 
 config IMX_GPCV2
 	bool
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH] irqchip: Enable compile-testing for Renesas drivers
  2019-06-07  9:50 [PATCH] irqchip: Enable compile-testing for Renesas drivers Geert Uytterhoeven
@ 2019-06-10  6:52 ` Yoshinori Sato
  2019-06-10 13:50 ` Chris Brandt
  2019-06-13  9:58 ` Simon Horman
  2 siblings, 0 replies; 4+ messages in thread
From: Yoshinori Sato @ 2019-06-10  6:52 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, linux-renesas-soc,
	uclinux-h8-devel, linux-kernel

On Fri, 07 Jun 2019 18:50:36 +0900,
Geert Uytterhoeven wrote:
> 
> Enable compile-testing for all Renesas interrupt controller drivers,
> except for RENESAS_H8300H_INTC.  The latter relies on a function
> (ctrl_bclr()) that is not available on other architectures.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

for RENESAS_H8S_INTC
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>

> ---
>  drivers/irqchip/Kconfig | 20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 2d3b5a27cc988ab6..fe509b88f99a8f10 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -217,17 +217,26 @@ config RDA_INTC
>  	select IRQ_DOMAIN
>  
>  config RENESAS_INTC_IRQPIN
> -	bool
> +	bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
>  	select IRQ_DOMAIN
> +	help
> +	  Enable support for the Renesas Interrupt Controller for external
> +	  interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
>  
>  config RENESAS_IRQC
> -	bool
> +	bool "Renesas R-Mobile APE6 and R-Car IRQC support" if COMPILE_TEST
>  	select GENERIC_IRQ_CHIP
>  	select IRQ_DOMAIN
> +	help
> +	  Enable support for the Renesas Interrupt Controller for external
> +	  devices, as found on R-Mobile APE6, R-Car Gen2, and R-Car Gen3 SoCs.
>  
>  config RENESAS_RZA1_IRQC
> -	bool
> +	bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
>  	select IRQ_DOMAIN_HIERARCHY
> +	help
> +	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
> +	  to 8 external interrupts with configurable sense select.
>  
>  config ST_IRQCHIP
>  	bool
> @@ -303,8 +312,11 @@ config RENESAS_H8300H_INTC
>  	select IRQ_DOMAIN
>  
>  config RENESAS_H8S_INTC
> -        bool
> +	bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
>  	select IRQ_DOMAIN
> +	help
> +	  Enable support for the Renesas H8/300 Interrupt Controller, as found
> +	  on Renesas H8S SoCs.
>  
>  config IMX_GPCV2
>  	bool
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

* RE: [PATCH] irqchip: Enable compile-testing for Renesas drivers
  2019-06-07  9:50 [PATCH] irqchip: Enable compile-testing for Renesas drivers Geert Uytterhoeven
  2019-06-10  6:52 ` Yoshinori Sato
@ 2019-06-10 13:50 ` Chris Brandt
  2019-06-13  9:58 ` Simon Horman
  2 siblings, 0 replies; 4+ messages in thread
From: Chris Brandt @ 2019-06-10 13:50 UTC (permalink / raw)
  To: Geert Uytterhoeven, Thomas Gleixner, Jason Cooper, Marc Zyngier
  Cc: Yoshinori Sato, linux-renesas-soc, uclinux-h8-devel, linux-kernel

On Fri, Jun 07, 2019, Geert Uytterhoeven wrote:
>  config RENESAS_RZA1_IRQC
> -	bool
> +	bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
>  	select IRQ_DOMAIN_HIERARCHY
> +	help
> +	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
> +	  to 8 external interrupts with configurable sense select.


Appreciated−by: Chris Brandt <chris.brandt@renesas.com>

:)


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] irqchip: Enable compile-testing for Renesas drivers
  2019-06-07  9:50 [PATCH] irqchip: Enable compile-testing for Renesas drivers Geert Uytterhoeven
  2019-06-10  6:52 ` Yoshinori Sato
  2019-06-10 13:50 ` Chris Brandt
@ 2019-06-13  9:58 ` Simon Horman
  2 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2019-06-13  9:58 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Thomas Gleixner, Jason Cooper, Marc Zyngier, Yoshinori Sato,
	linux-renesas-soc, uclinux-h8-devel, linux-kernel

On Fri, Jun 07, 2019 at 11:50:36AM +0200, Geert Uytterhoeven wrote:
> Enable compile-testing for all Renesas interrupt controller drivers,
> except for RENESAS_H8300H_INTC.  The latter relies on a function
> (ctrl_bclr()) that is not available on other architectures.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> ---
>  drivers/irqchip/Kconfig | 20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 2d3b5a27cc988ab6..fe509b88f99a8f10 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -217,17 +217,26 @@ config RDA_INTC
>  	select IRQ_DOMAIN
>  
>  config RENESAS_INTC_IRQPIN
> -	bool
> +	bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
>  	select IRQ_DOMAIN
> +	help
> +	  Enable support for the Renesas Interrupt Controller for external
> +	  interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
>  
>  config RENESAS_IRQC
> -	bool
> +	bool "Renesas R-Mobile APE6 and R-Car IRQC support" if COMPILE_TEST
>  	select GENERIC_IRQ_CHIP
>  	select IRQ_DOMAIN
> +	help
> +	  Enable support for the Renesas Interrupt Controller for external
> +	  devices, as found on R-Mobile APE6, R-Car Gen2, and R-Car Gen3 SoCs.
>  
>  config RENESAS_RZA1_IRQC
> -	bool
> +	bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
>  	select IRQ_DOMAIN_HIERARCHY
> +	help
> +	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
> +	  to 8 external interrupts with configurable sense select.
>  
>  config ST_IRQCHIP
>  	bool
> @@ -303,8 +312,11 @@ config RENESAS_H8300H_INTC
>  	select IRQ_DOMAIN
>  
>  config RENESAS_H8S_INTC
> -        bool
> +	bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
>  	select IRQ_DOMAIN
> +	help
> +	  Enable support for the Renesas H8/300 Interrupt Controller, as found
> +	  on Renesas H8S SoCs.
>  
>  config IMX_GPCV2
>  	bool
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2019-06-13 15:38 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-07  9:50 [PATCH] irqchip: Enable compile-testing for Renesas drivers Geert Uytterhoeven
2019-06-10  6:52 ` Yoshinori Sato
2019-06-10 13:50 ` Chris Brandt
2019-06-13  9:58 ` Simon Horman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).