[PATCH 4.19 00/51] 4.19.50-stable review

[PATCH 4.19 00/51] 4.19.50-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.50 release.
There are 51 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue 11 Jun 2019 04:40:08 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.50-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.50-rc1

Jiri Slaby <jslaby@suse.cz>
    TTY: serial_core, add ->install

Tina Zhang <tina.zhang@intel.com>
    drm/i915/gvt: Initialize intel_gvt_gtt_entry in stack

Helen Koike <helen.koike@collabora.com>
    drm: don't block fb changes for async plane updates

Jonathan Corbet <corbet@lwn.net>
    drm/i915: Maintain consistent documentation subsection ordering

Daniel Drake <drake@endlessm.com>
    drm/i915/fbc: disable framebuffer compression on GeminiLake

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/soc15: skip reset on init

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Fix I915_EXEC_RING_MASK

Aaron Liu <aaron.liu@amd.com>
    drm/amdgpu: remove ATPX_DGPU_REQ_POWER_FOR_DISPLAYS check when hotplug-in

Christian König <christian.koenig@amd.com>
    drm/radeon: prefer lower reference dividers

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/psp: move psp version specific function pointers to early_init

Ryan Pavlik <ryan.pavlik@collabora.com>
    drm: add non-desktop quirks to Sensics and OSVR headsets.

Dave Airlie <airlied@redhat.com>
    drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)

Andres Rodriguez <andresx7@gmail.com>
    drm: add non-desktop quirk for Valve HMDs

Helen Koike <helen.koike@collabora.com>
    drm/msm: fix fb references in async update

Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
    drm/gma500/cdv: Check vbt config bits when detecting lvds panels

Dan Carpenter <dan.carpenter@oracle.com>
    test_firmware: Use correct snprintf() limit

Dan Carpenter <dan.carpenter@oracle.com>
    genwqe: Prevent an integer overflow in the ioctl

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "MIPS: perf: ath79: Fix perfcount IRQ assignment"

Paul Burton <paul.burton@mips.com>
    MIPS: pistachio: Build uImage.gz by default

Paul Burton <paul.burton@mips.com>
    MIPS: Bounds check virt_addr_valid

Roger Pau Monne <roger.pau@citrix.com>
    xen-blkfront: switch kcalloc to kvcalloc for large array allocation

Gerald Schaefer <gerald.schaefer@de.ibm.com>
    s390/mm: fix address space detection in exception handling

Robert Hancock <hancock@sedsystems.ca>
    i2c: xiic: Add max_read_len quirk

Jann Horn <jannh@google.com>
    x86/insn-eval: Fix use-after-free access to LDT entry

Jiri Kosina <jkosina@suse.cz>
    x86/power: Fix 'nosmt' vs hibernation triple fault during resume

Kees Cook <keescook@chromium.org>
    pstore/ram: Run without kernel crash dump region

Pi-Hsun Shih <pihsun@chromium.org>
    pstore: Set tfm to NULL on free_buf_for_compression

Kees Cook <keescook@chromium.org>
    pstore: Convert buf_lock to semaphore

Kees Cook <keescook@chromium.org>
    pstore: Remove needless lock during console writes

Miklos Szeredi <mszeredi@redhat.com>
    fuse: fallocate: fix return with locked inode

Yihao Wu <wuyihao@linux.alibaba.com>
    NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled

Yihao Wu <wuyihao@linux.alibaba.com>
    NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter

John David Anglin <dave.anglin@bell.net>
    parisc: Use implicit space register selection for loading the coherence index of I/O pdirs

Linus Torvalds <torvalds@linux-foundation.org>
    rcu: locking and unlocking need to always be at least barriers

Emil Lenngren <emil.lenngren@gmail.com>
    mtd: spinand: macronix: Fix ECC Status Read

Olivier Matz <olivier.matz@6wind.com>
    ipv6: fix EFAULT on sendto with icmpv6 and hdrincl

Olivier Matz <olivier.matz@6wind.com>
    ipv6: use READ_ONCE() for inet->hdrincl as in ipv4

Hangbin Liu <liuhangbin@gmail.com>
    Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"

Paolo Abeni <pabeni@redhat.com>
    pktgen: do not sleep with the thread lock held.

Willem de Bruijn <willemb@google.com>
    packet: unconditionally free po->rollover

Jakub Kicinski <jakub.kicinski@netronome.com>
    net/tls: replace the sleeping lock around RX resync with a bit lock

Russell King <rmk+kernel@armlinux.org.uk>
    net: sfp: read eeprom in maximum 16 byte increments

Zhu Yanjun <yanjun.zhu@oracle.com>
    net: rds: fix memory leak in rds_ib_flush_mr_pool

Maxime Chevallier <maxime.chevallier@bootlin.com>
    net: mvpp2: Use strscpy to handle stat strings

Erez Alfasi <ereza@mellanox.com>
    net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query

Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
    net: ethernet: ti: cpsw_ethtool: fix ethtool ring param set

David Ahern <dsahern@gmail.com>
    neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit

Xin Long <lucien.xin@gmail.com>
    ipv6: fix the check before getting the cookie in rt6_get_cookie

Xin Long <lucien.xin@gmail.com>
    ipv4: not do cache for local delivery if bc_forwarding is enabled

Neil Horman <nhorman@tuxdriver.com>
    Fix memory leak in sctp_process_init

Vivien Didelot <vivien.didelot@gmail.com>
    ethtool: fix potential userspace buffer overflow


-------------

Diffstat:

 Makefile                                        |  4 +-
 arch/mips/ath79/setup.c                         |  6 ++
 arch/mips/mm/mmap.c                             |  5 ++
 arch/mips/pistachio/Platform                    |  1 +
 arch/powerpc/kernel/nvram_64.c                  |  2 -
 arch/s390/mm/fault.c                            |  5 +-
 arch/x86/lib/insn-eval.c                        | 47 ++++++++-------
 arch/x86/power/cpu.c                            | 10 ++++
 arch/x86/power/hibernate_64.c                   | 33 ++++++++++
 drivers/acpi/apei/erst.c                        |  1 -
 drivers/block/xen-blkfront.c                    | 38 ++++++------
 drivers/firmware/efi/efi-pstore.c               |  4 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c        |  3 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c         | 19 +++---
 drivers/gpu/drm/amd/amdgpu/soc15.c              |  5 ++
 drivers/gpu/drm/drm_atomic_helper.c             | 22 +++----
 drivers/gpu/drm/drm_edid.c                      | 25 ++++++++
 drivers/gpu/drm/gma500/cdv_intel_lvds.c         |  3 +
 drivers/gpu/drm/gma500/intel_bios.c             |  3 +
 drivers/gpu/drm/gma500/psb_drv.h                |  1 +
 drivers/gpu/drm/i915/gvt/gtt.c                  |  6 +-
 drivers/gpu/drm/i915/i915_reg.h                 |  6 +-
 drivers/gpu/drm/i915/intel_fbc.c                |  4 ++
 drivers/gpu/drm/i915/intel_workarounds.c        |  2 +-
 drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c      |  4 ++
 drivers/gpu/drm/nouveau/Kconfig                 | 13 +++-
 drivers/gpu/drm/nouveau/nouveau_drm.c           |  7 ++-
 drivers/gpu/drm/radeon/radeon_display.c         |  4 +-
 drivers/i2c/busses/i2c-xiic.c                   |  5 ++
 drivers/irqchip/irq-ath79-misc.c                | 11 ----
 drivers/misc/genwqe/card_dev.c                  |  2 +
 drivers/misc/genwqe/card_utils.c                |  4 ++
 drivers/mtd/nand/spi/macronix.c                 |  8 ++-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c |  4 +-
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c |  4 +-
 drivers/net/ethernet/mellanox/mlx4/port.c       |  5 --
 drivers/net/ethernet/ti/cpsw.c                  |  2 +-
 drivers/net/phy/sfp.c                           | 24 ++++++--
 drivers/parisc/ccio-dma.c                       |  4 +-
 drivers/parisc/sba_iommu.c                      |  3 +-
 drivers/tty/serial/serial_core.c                | 24 ++++----
 fs/fuse/file.c                                  |  2 +-
 fs/nfs/nfs4proc.c                               | 32 ++++------
 fs/pstore/platform.c                            | 80 +++++++++++--------------
 fs/pstore/ram.c                                 | 37 +++++++-----
 include/drm/drm_modeset_helper_vtables.h        |  8 +++
 include/linux/cpu.h                             |  4 ++
 include/linux/pstore.h                          |  7 +--
 include/linux/rcupdate.h                        |  6 +-
 include/net/ip6_fib.h                           |  3 +-
 include/net/tls.h                               |  4 ++
 include/uapi/drm/i915_drm.h                     |  2 +-
 kernel/cpu.c                                    |  4 +-
 kernel/power/hibernate.c                        |  9 +++
 lib/test_firmware.c                             | 14 ++---
 net/core/ethtool.c                              |  5 +-
 net/core/fib_rules.c                            |  6 +-
 net/core/neighbour.c                            |  9 ++-
 net/core/pktgen.c                               | 11 ++++
 net/ipv4/route.c                                | 22 +++----
 net/ipv6/raw.c                                  | 25 +++++---
 net/packet/af_packet.c                          |  2 +-
 net/rds/ib_rdma.c                               | 10 ++--
 net/sctp/sm_make_chunk.c                        | 13 +---
 net/sctp/sm_sideeffect.c                        |  5 ++
 net/tls/tls_device.c                            | 27 +++++++--
 66 files changed, 461 insertions(+), 269 deletions(-)

[PATCH 4.19 01/51] ethtool: fix potential userspace buffer overflow

[Greg Kroah-Hartman]

From: Vivien Didelot <vivien.didelot@gmail.com>

[ Upstream commit 0ee4e76937d69128a6a66861ba393ebdc2ffc8a2 ]

ethtool_get_regs() allocates a buffer of size ops->get_regs_len(),
and pass it to the kernel driver via ops->get_regs() for filling.

There is no restriction about what the kernel drivers can or cannot do
with the open ethtool_regs structure. They usually set regs->version
and ignore regs->len or set it to the same size as ops->get_regs_len().

But if userspace allocates a smaller buffer for the registers dump,
we would cause a userspace buffer overflow in the final copy_to_user()
call, which uses the regs.len value potentially reset by the driver.

To fix this, make this case obvious and store regs.len before calling
ops->get_regs(), to only copy as much data as requested by userspace,
up to the value returned by ops->get_regs_len().

While at it, remove the redundant check for non-null regbuf.

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/ethtool.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1434,13 +1434,16 @@ static int ethtool_get_regs(struct net_d
 			return -ENOMEM;
 	}
 
+	if (regs.len < reglen)
+		reglen = regs.len;
+
 	ops->get_regs(dev, &regs, regbuf);
 
 	ret = -EFAULT;
 	if (copy_to_user(useraddr, &regs, sizeof(regs)))
 		goto out;
 	useraddr += offsetof(struct ethtool_regs, data);
-	if (regbuf && copy_to_user(useraddr, regbuf, regs.len))
+	if (copy_to_user(useraddr, regbuf, reglen))
 		goto out;
 	ret = 0;
 

[PATCH 4.19 02/51] Fix memory leak in sctp_process_init

[Greg Kroah-Hartman]

From: Neil Horman <nhorman@tuxdriver.com>

[ Upstream commit 0a8dd9f67cd0da7dc284f48b032ce00db1a68791 ]

syzbot found the following leak in sctp_process_init
BUG: memory leak
unreferenced object 0xffff88810ef68400 (size 1024):
  comm "syz-executor273", pid 7046, jiffies 4294945598 (age 28.770s)
  hex dump (first 32 bytes):
    1d de 28 8d de 0b 1b e3 b5 c2 f9 68 fd 1a 97 25  ..(........h...%
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000a02cebbd>] kmemleak_alloc_recursive include/linux/kmemleak.h:55
[inline]
    [<00000000a02cebbd>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<00000000a02cebbd>] slab_alloc mm/slab.c:3326 [inline]
    [<00000000a02cebbd>] __do_kmalloc mm/slab.c:3658 [inline]
    [<00000000a02cebbd>] __kmalloc_track_caller+0x15d/0x2c0 mm/slab.c:3675
    [<000000009e6245e6>] kmemdup+0x27/0x60 mm/util.c:119
    [<00000000dfdc5d2d>] kmemdup include/linux/string.h:432 [inline]
    [<00000000dfdc5d2d>] sctp_process_init+0xa7e/0xc20
net/sctp/sm_make_chunk.c:2437
    [<00000000b58b62f8>] sctp_cmd_process_init net/sctp/sm_sideeffect.c:682
[inline]
    [<00000000b58b62f8>] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1384
[inline]
    [<00000000b58b62f8>] sctp_side_effects net/sctp/sm_sideeffect.c:1194
[inline]
    [<00000000b58b62f8>] sctp_do_sm+0xbdc/0x1d60 net/sctp/sm_sideeffect.c:1165
    [<0000000044e11f96>] sctp_assoc_bh_rcv+0x13c/0x200
net/sctp/associola.c:1074
    [<00000000ec43804d>] sctp_inq_push+0x7f/0xb0 net/sctp/inqueue.c:95
    [<00000000726aa954>] sctp_backlog_rcv+0x5e/0x2a0 net/sctp/input.c:354
    [<00000000d9e249a8>] sk_backlog_rcv include/net/sock.h:950 [inline]
    [<00000000d9e249a8>] __release_sock+0xab/0x110 net/core/sock.c:2418
    [<00000000acae44fa>] release_sock+0x37/0xd0 net/core/sock.c:2934
    [<00000000963cc9ae>] sctp_sendmsg+0x2c0/0x990 net/sctp/socket.c:2122
    [<00000000a7fc7565>] inet_sendmsg+0x64/0x120 net/ipv4/af_inet.c:802
    [<00000000b732cbd3>] sock_sendmsg_nosec net/socket.c:652 [inline]
    [<00000000b732cbd3>] sock_sendmsg+0x54/0x70 net/socket.c:671
    [<00000000274c57ab>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2292
    [<000000008252aedb>] __sys_sendmsg+0x80/0xf0 net/socket.c:2330
    [<00000000f7bf23d1>] __do_sys_sendmsg net/socket.c:2339 [inline]
    [<00000000f7bf23d1>] __se_sys_sendmsg net/socket.c:2337 [inline]
    [<00000000f7bf23d1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2337
    [<00000000a8b4131f>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:3

The problem was that the peer.cookie value points to an skb allocated
area on the first pass through this function, at which point it is
overwritten with a heap allocated value, but in certain cases, where a
COOKIE_ECHO chunk is included in the packet, a second pass through
sctp_process_init is made, where the cookie value is re-allocated,
leaking the first allocation.

Fix is to always allocate the cookie value, and free it when we are done
using it.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_make_chunk.c |   13 +++----------
 net/sctp/sm_sideeffect.c |    5 +++++
 2 files changed, 8 insertions(+), 10 deletions(-)

--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2329,7 +2329,6 @@ int sctp_process_init(struct sctp_associ
 	union sctp_addr addr;
 	struct sctp_af *af;
 	int src_match = 0;
-	char *cookie;
 
 	/* We must include the address that the INIT packet came from.
 	 * This is the only address that matters for an INIT packet.
@@ -2433,14 +2432,6 @@ int sctp_process_init(struct sctp_associ
 	/* Peer Rwnd   : Current calculated value of the peer's rwnd.  */
 	asoc->peer.rwnd = asoc->peer.i.a_rwnd;
 
-	/* Copy cookie in case we need to resend COOKIE-ECHO. */
-	cookie = asoc->peer.cookie;
-	if (cookie) {
-		asoc->peer.cookie = kmemdup(cookie, asoc->peer.cookie_len, gfp);
-		if (!asoc->peer.cookie)
-			goto clean_up;
-	}
-
 	/* RFC 2960 7.2.1 The initial value of ssthresh MAY be arbitrarily
 	 * high (for example, implementations MAY use the size of the receiver
 	 * advertised window).
@@ -2609,7 +2600,9 @@ do_addr_param:
 	case SCTP_PARAM_STATE_COOKIE:
 		asoc->peer.cookie_len =
 			ntohs(param.p->length) - sizeof(struct sctp_paramhdr);
-		asoc->peer.cookie = param.cookie->body;
+		asoc->peer.cookie = kmemdup(param.cookie->body, asoc->peer.cookie_len, gfp);
+		if (!asoc->peer.cookie)
+			retval = 0;
 		break;
 
 	case SCTP_PARAM_HEARTBEAT_INFO:
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -898,6 +898,11 @@ static void sctp_cmd_new_state(struct sc
 						asoc->rto_initial;
 	}
 
+	if (sctp_state(asoc, ESTABLISHED)) {
+		kfree(asoc->peer.cookie);
+		asoc->peer.cookie = NULL;
+	}
+
 	if (sctp_state(asoc, ESTABLISHED) ||
 	    sctp_state(asoc, CLOSED) ||
 	    sctp_state(asoc, SHUTDOWN_RECEIVED)) {

[PATCH 4.19 03/51] ipv4: not do cache for local delivery if bc_forwarding is enabled

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 0a90478b93a46bdcd56ba33c37566a993e455d54 ]

With the topo:

    h1 ---| rp1            |
          |     route  rp3 |--- h3 (192.168.200.1)
    h2 ---| rp2            |

If rp1 bc_forwarding is set while rp2 bc_forwarding is not, after
doing "ping 192.168.200.255" on h1, then ping 192.168.200.255 on
h2, and the packets can still be forwared.

This issue was caused by the input route cache. It should only do
the cache for either bc forwarding or local delivery. Otherwise,
local delivery can use the route cache for bc forwarding of other
interfaces.

This patch is to fix it by not doing cache for local delivery if
all.bc_forwarding is enabled.

Note that we don't fix it by checking route cache local flag after
rt_cache_valid() in "local_input:" and "ip_mkroute_input", as the
common route code shouldn't be touched for bc_forwarding.

Fixes: 5cbf777cfdf6 ("route: add support for directed broadcast forwarding")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1960,7 +1960,7 @@ static int ip_route_input_slow(struct sk
 	u32		itag = 0;
 	struct rtable	*rth;
 	struct flowi4	fl4;
-	bool do_cache;
+	bool do_cache = true;
 
 	/* IP on this device is disabled. */
 
@@ -2037,6 +2037,9 @@ static int ip_route_input_slow(struct sk
 	if (res->type == RTN_BROADCAST) {
 		if (IN_DEV_BFORWARD(in_dev))
 			goto make_route;
+		/* not do cache if bc_forwarding is enabled */
+		if (IPV4_DEVCONF_ALL(net, BC_FORWARDING))
+			do_cache = false;
 		goto brd_input;
 	}
 
@@ -2074,16 +2077,13 @@ brd_input:
 	RT_CACHE_STAT_INC(in_brd);
 
 local_input:
-	do_cache = false;
-	if (res->fi) {
-		if (!itag) {
-			rth = rcu_dereference(FIB_RES_NH(*res).nh_rth_input);
-			if (rt_cache_valid(rth)) {
-				skb_dst_set_noref(skb, &rth->dst);
-				err = 0;
-				goto out;
-			}
-			do_cache = true;
+	do_cache &= res->fi && !itag;
+	if (do_cache) {
+		rth = rcu_dereference(FIB_RES_NH(*res).nh_rth_input);
+		if (rt_cache_valid(rth)) {
+			skb_dst_set_noref(skb, &rth->dst);
+			err = 0;
+			goto out;
 		}
 	}
 

[PATCH 4.19 04/51] ipv6: fix the check before getting the cookie in rt6_get_cookie

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit b7999b07726c16974ba9ca3bb9fe98ecbec5f81c ]

In Jianlin's testing, netperf was broken with 'Connection reset by peer',
as the cookie check failed in rt6_check() and ip6_dst_check() always
returned NULL.

It's caused by Commit 93531c674315 ("net/ipv6: separate handling of FIB
entries from dst based routes"), where the cookie can be got only when
'c1'(see below) for setting dst_cookie whereas rt6_check() is called
when !'c1' for checking dst_cookie, as we can see in ip6_dst_check().

Since in ip6_dst_check() both rt6_dst_from_check() (c1) and rt6_check()
(!c1) will check the 'from' cookie, this patch is to remove the c1 check
in rt6_get_cookie(), so that the dst_cookie can always be set properly.

c1:
  (rt->rt6i_flags & RTF_PCPU || unlikely(!list_empty(&rt->rt6i_uncached)))

Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip6_fib.h |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -260,8 +260,7 @@ static inline u32 rt6_get_cookie(const s
 	rcu_read_lock();
 
 	from = rcu_dereference(rt->from);
-	if (from && (rt->rt6i_flags & RTF_PCPU ||
-	    unlikely(!list_empty(&rt->rt6i_uncached))))
+	if (from)
 		fib6_get_cookie_safe(from, &cookie);
 
 	rcu_read_unlock();

[PATCH 4.19 05/51] neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit

[Greg Kroah-Hartman]

From: David Ahern <dsahern@gmail.com>

[ Upstream commit 4b2a2bfeb3f056461a90bd621e8bd7d03fa47f60 ]

Commit cd9ff4de0107 changed the key for IFF_POINTOPOINT devices to
INADDR_ANY but neigh_xmit which is used for MPLS encapsulations was not
updated to use the altered key. The result is that every packet Tx does
a lookup on the gateway address which does not find an entry, a new one
is created only to find the existing one in the table right before the
insert since arp_constructor was updated to reset the primary key. This
is seen in the allocs and destroys counters:
    ip -s -4 ntable show | head -10 | grep alloc

which increase for each packet showing the unnecessary overhread.

Fix by having neigh_xmit use __ipv4_neigh_lookup_noref for NEIGH_ARP_TABLE.

Fixes: cd9ff4de0107 ("ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY")
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/neighbour.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -30,6 +30,7 @@
 #include <linux/times.h>
 #include <net/net_namespace.h>
 #include <net/neighbour.h>
+#include <net/arp.h>
 #include <net/dst.h>
 #include <net/sock.h>
 #include <net/netevent.h>
@@ -2536,7 +2537,13 @@ int neigh_xmit(int index, struct net_dev
 		if (!tbl)
 			goto out;
 		rcu_read_lock_bh();
-		neigh = __neigh_lookup_noref(tbl, addr, dev);
+		if (index == NEIGH_ARP_TABLE) {
+			u32 key = *((u32 *)addr);
+
+			neigh = __ipv4_neigh_lookup_noref(dev, key);
+		} else {
+			neigh = __neigh_lookup_noref(tbl, addr, dev);
+		}
 		if (!neigh)
 			neigh = __neigh_create(tbl, addr, dev, false);
 		err = PTR_ERR(neigh);

[PATCH 4.19 06/51] net: ethernet: ti: cpsw_ethtool: fix ethtool ring param set

[Greg Kroah-Hartman]

From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

[ Upstream commit 09faf5a7d7c0bcb07faba072f611937af9dd5788 ]

Fix ability to set RX descriptor number, the reason - initially
"tx_max_pending" was set incorrectly, but the issue appears after
adding sanity check, so fix is for "sanity" patch.

Fixes: 37e2d99b59c476 ("ethtool: Ensure new ring parameters are within bounds during SRINGPARAM")
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ti/cpsw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2978,7 +2978,7 @@ static void cpsw_get_ringparam(struct ne
 	struct cpsw_common *cpsw = priv->cpsw;
 
 	/* not supported */
-	ering->tx_max_pending = 0;
+	ering->tx_max_pending = descs_pool_size - CPSW_MAX_QUEUES;
 	ering->tx_pending = cpdma_get_num_tx_descs(cpsw->dma);
 	ering->rx_max_pending = descs_pool_size - CPSW_MAX_QUEUES;
 	ering->rx_pending = cpdma_get_num_rx_descs(cpsw->dma);

[PATCH 4.19 07/51] net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query

[Greg Kroah-Hartman]

From: Erez Alfasi <ereza@mellanox.com>

[ Upstream commit 135dd9594f127c8a82d141c3c8430e9e2143216a ]

Querying EEPROM high pages data for SFP module is currently
not supported by our driver but is still tried, resulting in
invalid FW queries.

Set the EEPROM ethtool data length to 256 for SFP module to
limit the reading for page 0 only and prevent invalid FW queries.

Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c |    4 +++-
 drivers/net/ethernet/mellanox/mlx4/port.c       |    5 -----
 2 files changed, 3 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -2010,6 +2010,8 @@ static int mlx4_en_set_tunable(struct ne
 	return ret;
 }
 
+#define MLX4_EEPROM_PAGE_LEN 256
+
 static int mlx4_en_get_module_info(struct net_device *dev,
 				   struct ethtool_modinfo *modinfo)
 {
@@ -2044,7 +2046,7 @@ static int mlx4_en_get_module_info(struc
 		break;
 	case MLX4_MODULE_ID_SFP:
 		modinfo->type = ETH_MODULE_SFF_8472;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		modinfo->eeprom_len = MLX4_EEPROM_PAGE_LEN;
 		break;
 	default:
 		return -EINVAL;
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -2077,11 +2077,6 @@ int mlx4_get_module_info(struct mlx4_dev
 		size -= offset + size - I2C_PAGE_SIZE;
 
 	i2c_addr = I2C_ADDR_LOW;
-	if (offset >= I2C_PAGE_SIZE) {
-		/* Reset offset to high page */
-		i2c_addr = I2C_ADDR_HIGH;
-		offset -= I2C_PAGE_SIZE;
-	}
 
 	cable_info = (struct mlx4_cable_info *)inmad->data;
 	cable_info->dev_mem_address = cpu_to_be16(offset);

[PATCH 4.19 08/51] net: mvpp2: Use strscpy to handle stat strings

[Greg Kroah-Hartman]

From: Maxime Chevallier <maxime.chevallier@bootlin.com>

[ Upstream commit d37acd5aa99c57505b64913e0e2624ec3daed8c5 ]

Use a safe strscpy call to copy the ethtool stat strings into the
relevant buffers, instead of a memcpy that will be accessing
out-of-bound data.

Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1310,8 +1310,8 @@ static void mvpp2_ethtool_get_strings(st
 		int i;
 
 		for (i = 0; i < ARRAY_SIZE(mvpp2_ethtool_regs); i++)
-			memcpy(data + i * ETH_GSTRING_LEN,
-			       &mvpp2_ethtool_regs[i].string, ETH_GSTRING_LEN);
+			strscpy(data + i * ETH_GSTRING_LEN,
+			        mvpp2_ethtool_regs[i].string, ETH_GSTRING_LEN);
 	}
 }
 

[PATCH 4.19 09/51] net: rds: fix memory leak in rds_ib_flush_mr_pool

[Greg Kroah-Hartman]

From: Zhu Yanjun <yanjun.zhu@oracle.com>

[ Upstream commit 85cb928787eab6a2f4ca9d2a798b6f3bed53ced1 ]

When the following tests last for several hours, the problem will occur.

Server:
    rds-stress -r 1.1.1.16 -D 1M
Client:
    rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30

The following will occur.

"
Starting up....
tsks   tx/s   rx/s  tx+rx K/s    mbi K/s    mbo K/s tx us/c   rtt us cpu
%
  1      0      0       0.00       0.00       0.00    0.00 0.00 -1.00
  1      0      0       0.00       0.00       0.00    0.00 0.00 -1.00
  1      0      0       0.00       0.00       0.00    0.00 0.00 -1.00
  1      0      0       0.00       0.00       0.00    0.00 0.00 -1.00
"
>From vmcore, we can find that clean_list is NULL.

>From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker.
Then rds_ib_mr_pool_flush_worker calls
"
 rds_ib_flush_mr_pool(pool, 0, NULL);
"
Then in function
"
int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool,
                         int free_all, struct rds_ib_mr **ibmr_ret)
"
ibmr_ret is NULL.

In the source code,
"
...
list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail);
if (ibmr_ret)
        *ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode);

/* more than one entry in llist nodes */
if (clean_nodes->next)
        llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list);
...
"
When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next
instead of clean_nodes is added in clean_list.
So clean_nodes is discarded. It can not be used again.
The workqueue is executed periodically. So more and more clean_nodes are
discarded. Finally the clean_list is NULL.
Then this problem will occur.

Fixes: 1bc144b62524 ("net, rds, Replace xlist in net/rds/xlist.h with llist")
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rds/ib_rdma.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/net/rds/ib_rdma.c
+++ b/net/rds/ib_rdma.c
@@ -428,12 +428,14 @@ int rds_ib_flush_mr_pool(struct rds_ib_m
 		wait_clean_list_grace();
 
 		list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail);
-		if (ibmr_ret)
+		if (ibmr_ret) {
 			*ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode);
-
+			clean_nodes = clean_nodes->next;
+		}
 		/* more than one entry in llist nodes */
-		if (clean_nodes->next)
-			llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list);
+		if (clean_nodes)
+			llist_add_batch(clean_nodes, clean_tail,
+					&pool->clean_list);
 
 	}
 

[PATCH 4.19 10/51] net: sfp: read eeprom in maximum 16 byte increments

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 28e74a7cfd6403f0d1c0f8b10b45d6fae37b227e ]

Some SFP modules do not like reads longer than 16 bytes, so read the
EEPROM in chunks of 16 bytes at a time.  This behaviour is not specified
in the SFP MSAs, which specifies:

 "The serial interface uses the 2-wire serial CMOS E2PROM protocol
  defined for the ATMEL AT24C01A/02/04 family of components."

and

 "As long as the SFP+ receives an acknowledge, it shall serially clock
  out sequential data words. The sequence is terminated when the host
  responds with a NACK and a STOP instead of an acknowledge."

We must avoid breaking a read across a 16-bit quantity in the diagnostic
page, thankfully all 16-bit quantities in that page are naturally
aligned.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/sfp.c |   24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -280,6 +280,7 @@ static int sfp_i2c_read(struct sfp *sfp,
 {
 	struct i2c_msg msgs[2];
 	u8 bus_addr = a2 ? 0x51 : 0x50;
+	size_t this_len;
 	int ret;
 
 	msgs[0].addr = bus_addr;
@@ -291,11 +292,26 @@ static int sfp_i2c_read(struct sfp *sfp,
 	msgs[1].len = len;
 	msgs[1].buf = buf;
 
-	ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs));
-	if (ret < 0)
-		return ret;
+	while (len) {
+		this_len = len;
+		if (this_len > 16)
+			this_len = 16;
 
-	return ret == ARRAY_SIZE(msgs) ? len : 0;
+		msgs[1].len = this_len;
+
+		ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs));
+		if (ret < 0)
+			return ret;
+
+		if (ret != ARRAY_SIZE(msgs))
+			break;
+
+		msgs[1].buf += this_len;
+		dev_addr += this_len;
+		len -= this_len;
+	}
+
+	return msgs[1].buf - (u8 *)buf;
 }
 
 static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,

[PATCH 4.19 11/51] net/tls: replace the sleeping lock around RX resync with a bit lock

[Greg Kroah-Hartman]

From: Jakub Kicinski <jakub.kicinski@netronome.com>

[ Upstream commit e52972c11d6b1262964db96d65934196db621685 ]

Commit 38030d7cb779 ("net/tls: avoid NULL-deref on resync during device removal")
tried to fix a potential NULL-dereference by taking the
context rwsem.  Unfortunately the RX resync may get called
from soft IRQ, so we can't use the rwsem to protect from
the device disappearing.  Because we are guaranteed there
can be only one resync at a time (it's called from strparser)
use a bit to indicate resync is busy and make device
removal wait for the bit to get cleared.

Note that there is a leftover "flags" field in struct
tls_context already.

Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/tls.h    |    4 ++++
 net/tls/tls_device.c |   27 +++++++++++++++++++++------
 2 files changed, 25 insertions(+), 6 deletions(-)

--- a/include/net/tls.h
+++ b/include/net/tls.h
@@ -161,6 +161,10 @@ enum {
 	TLS_PENDING_CLOSED_RECORD
 };
 
+enum tls_context_flags {
+	TLS_RX_SYNC_RUNNING = 0,
+};
+
 struct cipher_context {
 	u16 prepend_size;
 	u16 tag_size;
--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -545,10 +545,22 @@ static int tls_device_push_pending_recor
 	return tls_push_data(sk, &msg_iter, 0, flags, TLS_RECORD_TYPE_DATA);
 }
 
+static void tls_device_resync_rx(struct tls_context *tls_ctx,
+				 struct sock *sk, u32 seq, u64 rcd_sn)
+{
+	struct net_device *netdev;
+
+	if (WARN_ON(test_and_set_bit(TLS_RX_SYNC_RUNNING, &tls_ctx->flags)))
+		return;
+	netdev = READ_ONCE(tls_ctx->netdev);
+	if (netdev)
+		netdev->tlsdev_ops->tls_dev_resync_rx(netdev, sk, seq, rcd_sn);
+	clear_bit_unlock(TLS_RX_SYNC_RUNNING, &tls_ctx->flags);
+}
+
 void handle_device_resync(struct sock *sk, u32 seq, u64 rcd_sn)
 {
 	struct tls_context *tls_ctx = tls_get_ctx(sk);
-	struct net_device *netdev = tls_ctx->netdev;
 	struct tls_offload_context_rx *rx_ctx;
 	u32 is_req_pending;
 	s64 resync_req;
@@ -563,10 +575,10 @@ void handle_device_resync(struct sock *s
 	is_req_pending = resync_req;
 
 	if (unlikely(is_req_pending) && req_seq == seq &&
-	    atomic64_try_cmpxchg(&rx_ctx->resync_req, &resync_req, 0))
-		netdev->tlsdev_ops->tls_dev_resync_rx(netdev, sk,
-						      seq + TLS_HEADER_SIZE - 1,
-						      rcd_sn);
+	    atomic64_try_cmpxchg(&rx_ctx->resync_req, &resync_req, 0)) {
+		seq += TLS_HEADER_SIZE - 1;
+		tls_device_resync_rx(tls_ctx, sk, seq, rcd_sn);
+	}
 }
 
 static int tls_device_reencrypt(struct sock *sk, struct sk_buff *skb)
@@ -954,7 +966,10 @@ static int tls_device_down(struct net_de
 		if (ctx->rx_conf == TLS_HW)
 			netdev->tlsdev_ops->tls_dev_del(netdev, ctx,
 							TLS_OFFLOAD_CTX_DIR_RX);
-		ctx->netdev = NULL;
+		WRITE_ONCE(ctx->netdev, NULL);
+		smp_mb__before_atomic(); /* pairs with test_and_set_bit() */
+		while (test_bit(TLS_RX_SYNC_RUNNING, &ctx->flags))
+			usleep_range(10, 200);
 		dev_put(netdev);
 		list_del_init(&ctx->list);
 

[PATCH 4.19 12/51] packet: unconditionally free po->rollover

[Greg Kroah-Hartman]

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit afa0925c6fcc6a8f610e996ca09bc3215048033c ]

Rollover used to use a complex RCU mechanism for assignment, which had
a race condition. The below patch fixed the bug and greatly simplified
the logic.

The feature depends on fanout, but the state is private to the socket.
Fanout_release returns f only when the last member leaves and the
fanout struct is to be freed.

Destroy rollover unconditionally, regardless of fanout state.

Fixes: 57f015f5eccf2 ("packet: fix crash in fanout_demux_rollover()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -3017,8 +3017,8 @@ static int packet_release(struct socket
 
 	synchronize_net();
 
+	kfree(po->rollover);
 	if (f) {
-		kfree(po->rollover);
 		fanout_release_data(f);
 		kfree(f);
 	}

[PATCH 4.19 13/51] pktgen: do not sleep with the thread lock held.

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 720f1de4021f09898b8c8443f3b3e995991b6e3a ]

Currently, the process issuing a "start" command on the pktgen procfs
interface, acquires the pktgen thread lock and never release it, until
all pktgen threads are completed. The above can blocks indefinitely any
other pktgen command and any (even unrelated) netdevice removal - as
the pktgen netdev notifier acquires the same lock.

The issue is demonstrated by the following script, reported by Matteo:

ip -b - <<'EOF'
	link add type dummy
	link add type veth
	link set dummy0 up
EOF
modprobe pktgen
echo reset >/proc/net/pktgen/pgctrl
{
	echo rem_device_all
	echo add_device dummy0
} >/proc/net/pktgen/kpktgend_0
echo count 0 >/proc/net/pktgen/dummy0
echo start >/proc/net/pktgen/pgctrl &
sleep 1
rmmod veth

Fix the above releasing the thread lock around the sleep call.

Additionally we must prevent racing with forcefull rmmod - as the
thread lock no more protects from them. Instead, acquire a self-reference
before waiting for any thread. As a side effect, running

rmmod pktgen

while some thread is running now fails with "module in use" error,
before this patch such command hanged indefinitely.

Note: the issue predates the commit reported in the fixes tag, but
this fix can't be applied before the mentioned commit.

v1 -> v2:
 - no need to check for thread existence after flipping the lock,
   pktgen threads are freed only at net exit time
 -

Fixes: 6146e6a43b35 ("[PKTGEN]: Removes thread_{un,}lock() macros.")
Reported-and-tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/pktgen.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3065,7 +3065,13 @@ static int pktgen_wait_thread_run(struct
 {
 	while (thread_is_running(t)) {
 
+		/* note: 't' will still be around even after the unlock/lock
+		 * cycle because pktgen_thread threads are only cleared at
+		 * net exit
+		 */
+		mutex_unlock(&pktgen_thread_lock);
 		msleep_interruptible(100);
+		mutex_lock(&pktgen_thread_lock);
 
 		if (signal_pending(current))
 			goto signal;
@@ -3080,6 +3086,10 @@ static int pktgen_wait_all_threads_run(s
 	struct pktgen_thread *t;
 	int sig = 1;
 
+	/* prevent from racing with rmmod */
+	if (!try_module_get(THIS_MODULE))
+		return sig;
+
 	mutex_lock(&pktgen_thread_lock);
 
 	list_for_each_entry(t, &pn->pktgen_threads, th_list) {
@@ -3093,6 +3103,7 @@ static int pktgen_wait_all_threads_run(s
 			t->control |= (T_STOP);
 
 	mutex_unlock(&pktgen_thread_lock);
+	module_put(THIS_MODULE);
 	return sig;
 }
 

[PATCH 4.19 14/51] Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 4970b42d5c362bf873982db7d93245c5281e58f4 ]

This reverts commit e9919a24d3022f72bcadc407e73a6ef17093a849.

Nathan reported the new behaviour breaks Android, as Android just add
new rules and delete old ones.

If we return 0 without adding dup rules, Android will remove the new
added rules and causing system to soft-reboot.

Fixes: e9919a24d302 ("fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Yaro Slav <yaro330@gmail.com>
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/fib_rules.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -756,9 +756,9 @@ int fib_nl_newrule(struct sk_buff *skb,
 	if (err)
 		goto errout;
 
-	if (rule_exists(ops, frh, tb, rule)) {
-		if (nlh->nlmsg_flags & NLM_F_EXCL)
-			err = -EEXIST;
+	if ((nlh->nlmsg_flags & NLM_F_EXCL) &&
+	    rule_exists(ops, frh, tb, rule)) {
+		err = -EEXIST;
 		goto errout_free;
 	}
 

[PATCH 4.19 15/51] ipv6: use READ_ONCE() for inet->hdrincl as in ipv4

[Greg Kroah-Hartman]

From: Olivier Matz <olivier.matz@6wind.com>

[ Upstream commit 59e3e4b52663a9d97efbce7307f62e4bc5c9ce91 ]

As it was done in commit 8f659a03a0ba ("net: ipv4: fix for a race
condition in raw_sendmsg") and commit 20b50d79974e ("net: ipv4: emulate
READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the
value of inet->hdrincl in a local variable, to avoid introducing a race
condition in the next commit.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/raw.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -782,6 +782,7 @@ static int rawv6_sendmsg(struct sock *sk
 	struct flowi6 fl6;
 	struct ipcm6_cookie ipc6;
 	int addr_len = msg->msg_namelen;
+	int hdrincl;
 	u16 proto;
 	int err;
 
@@ -795,6 +796,13 @@ static int rawv6_sendmsg(struct sock *sk
 	if (msg->msg_flags & MSG_OOB)
 		return -EOPNOTSUPP;
 
+	/* hdrincl should be READ_ONCE(inet->hdrincl)
+	 * but READ_ONCE() doesn't work with bit fields.
+	 * Doing this indirectly yields the same result.
+	 */
+	hdrincl = inet->hdrincl;
+	hdrincl = READ_ONCE(hdrincl);
+
 	/*
 	 *	Get and verify the address.
 	 */
@@ -907,7 +915,7 @@ static int rawv6_sendmsg(struct sock *sk
 		fl6.flowi6_oif = np->ucast_oif;
 	security_sk_classify_flow(sk, flowi6_to_flowi(&fl6));
 
-	if (inet->hdrincl)
+	if (hdrincl)
 		fl6.flowi6_flags |= FLOWI_FLAG_KNOWN_NH;
 
 	if (ipc6.tclass < 0)
@@ -930,7 +938,7 @@ static int rawv6_sendmsg(struct sock *sk
 		goto do_confirm;
 
 back_from_confirm:
-	if (inet->hdrincl)
+	if (hdrincl)
 		err = rawv6_send_hdrinc(sk, msg, len, &fl6, &dst,
 					msg->msg_flags, &ipc6.sockc);
 	else {

[PATCH 4.19 16/51] ipv6: fix EFAULT on sendto with icmpv6 and hdrincl

[Greg Kroah-Hartman]

From: Olivier Matz <olivier.matz@6wind.com>

[ Upstream commit b9aa52c4cb457e7416cc0c95f475e72ef4a61336 ]

The following code returns EFAULT (Bad address):

  s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6);
  setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1);
  sendto(ipv6_icmp6_packet, addr);   /* returns -1, errno = EFAULT */

The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW
instead of IPPROTO_ICMPV6.

The failure happens because 2 bytes are eaten from the msghdr by
rawv6_probe_proto_opt() starting from commit 19e3c66b52ca ("ipv6
equivalent of "ipv4: Avoid reading user iov twice after
raw_probe_proto_opt""), but at that time it was not a problem because
IPV6_HDRINCL was not yet introduced.

Only eat these 2 bytes if hdrincl == 0.

Fixes: 715f504b1189 ("ipv6: add IPV6_HDRINCL option for raw sockets")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/raw.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -894,11 +894,14 @@ static int rawv6_sendmsg(struct sock *sk
 	opt = ipv6_fixup_options(&opt_space, opt);
 
 	fl6.flowi6_proto = proto;
-	rfv.msg = msg;
-	rfv.hlen = 0;
-	err = rawv6_probe_proto_opt(&rfv, &fl6);
-	if (err)
-		goto out;
+
+	if (!hdrincl) {
+		rfv.msg = msg;
+		rfv.hlen = 0;
+		err = rawv6_probe_proto_opt(&rfv, &fl6);
+		if (err)
+			goto out;
+	}
 
 	if (!ipv6_addr_any(daddr))
 		fl6.daddr = *daddr;

[PATCH 4.19 17/51] mtd: spinand: macronix: Fix ECC Status Read

[Greg Kroah-Hartman]

From: Emil Lenngren <emil.lenngren@gmail.com>

commit f4cb4d7b46f6409382fd981eec9556e1f3c1dc5d upstream.

The datasheet specifies the upper four bits are reserved.
Testing on real hardware shows that these bits can indeed be nonzero.

Signed-off-by: Emil Lenngren <emil.lenngren@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/spi/macronix.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -10,6 +10,7 @@
 #include <linux/mtd/spinand.h>
 
 #define SPINAND_MFR_MACRONIX		0xC2
+#define MACRONIX_ECCSR_MASK		0x0F
 
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -55,7 +56,12 @@ static int mx35lf1ge4ab_get_eccsr(struct
 					  SPI_MEM_OP_DUMMY(1, 1),
 					  SPI_MEM_OP_DATA_IN(1, eccsr, 1));
 
-	return spi_mem_exec_op(spinand->spimem, &op);
+	int ret = spi_mem_exec_op(spinand->spimem, &op);
+	if (ret)
+		return ret;
+
+	*eccsr &= MACRONIX_ECCSR_MASK;
+	return 0;
 }
 
 static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,

[PATCH 4.19 18/51] rcu: locking and unlocking need to always be at least barriers

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 66be4e66a7f422128748e3c3ef6ee72b20a6197b upstream.

Herbert Xu pointed out that commit bb73c52bad36 ("rcu: Don't disable
preemption for Tiny and Tree RCU readers") was incorrect in making the
preempt_disable/enable() be conditional on CONFIG_PREEMPT_COUNT.

If CONFIG_PREEMPT_COUNT isn't enabled, the preemption enable/disable is
a no-op, but still is a compiler barrier.

And RCU locking still _needs_ that compiler barrier.

It is simply fundamentally not true that RCU locking would be a complete
no-op: we still need to guarantee (for example) that things that can
trap and cause preemption cannot migrate into the RCU locked region.

The way we do that is by making it a barrier.

See for example commit 386afc91144b ("spinlocks and preemption points
need to be at least compiler barriers") from back in 2013 that had
similar issues with spinlocks that become no-ops on UP: they must still
constrain the compiler from moving other operations into the critical
region.

Now, it is true that a lot of RCU operations already use READ_ONCE() and
WRITE_ONCE() (which in practice likely would never be re-ordered wrt
anything remotely interesting), but it is also true that that is not
globally the case, and that it's not even necessarily always possible
(ie bitfields etc).

Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: bb73c52bad36 ("rcu: Don't disable preemption for Tiny and Tree RCU readers")
Cc: stable@kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/rcupdate.h |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -78,14 +78,12 @@ void synchronize_rcu(void);
 
 static inline void __rcu_read_lock(void)
 {
-	if (IS_ENABLED(CONFIG_PREEMPT_COUNT))
-		preempt_disable();
+	preempt_disable();
 }
 
 static inline void __rcu_read_unlock(void)
 {
-	if (IS_ENABLED(CONFIG_PREEMPT_COUNT))
-		preempt_enable();
+	preempt_enable();
 }
 
 static inline void synchronize_rcu(void)

[PATCH 4.19 19/51] parisc: Use implicit space register selection for loading the coherence index of I/O pdirs

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

commit 63923d2c3800919774f5c651d503d1dd2adaddd5 upstream.

We only support I/O to kernel space. Using %sr1 to load the coherence
index may be racy unless interrupts are disabled. This patch changes the
code used to load the coherence index to use implicit space register
selection. This saves one instruction and eliminates the race.

Tested on rp3440, c8000 and c3750.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/parisc/ccio-dma.c  |    4 +---
 drivers/parisc/sba_iommu.c |    3 +--
 2 files changed, 2 insertions(+), 5 deletions(-)

--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -565,8 +565,6 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_
 	/* We currently only support kernel addresses */
 	BUG_ON(sid != KERNEL_SPACE);
 
-	mtsp(sid,1);
-
 	/*
 	** WORD 1 - low order word
 	** "hints" parm includes the VALID bit!
@@ -597,7 +595,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_
 	** Grab virtual index [0:11]
 	** Deposit virt_idx bits into I/O PDIR word
 	*/
-	asm volatile ("lci %%r0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
+	asm volatile ("lci %%r0(%1), %0" : "=r" (ci) : "r" (vba));
 	asm volatile ("extru %1,19,12,%0" : "+r" (ci) : "r" (ci));
 	asm volatile ("depw  %1,15,12,%0" : "+r" (pa) : "r" (ci));
 
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -575,8 +575,7 @@ sba_io_pdir_entry(u64 *pdir_ptr, space_t
 	pa = virt_to_phys(vba);
 	pa &= IOVP_MASK;
 
-	mtsp(sid,1);
-	asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
+	asm("lci 0(%1), %0" : "=r" (ci) : "r" (vba));
 	pa |= (ci >> PAGE_SHIFT) & 0xff;  /* move CI (8 bits) into lowest byte */
 
 	pa |= SBA_PDIR_VALID_BIT;	/* set "valid" bit */

[PATCH 4.19 20/51] NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter

[Greg Kroah-Hartman]

From: Yihao Wu <wuyihao@linux.alibaba.com>

commit 52b042ab9948cc367b61f9ca9c18603aa7813c3a upstream.

Commit b7dbcc0e433f "NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter"
found this bug. However it didn't fix it.

This commit replaces schedule_timeout() with wait_woken() and
default_wake_function() with woken_wake_function() in function
nfs4_retry_setlk() and nfs4_wake_lock_waiter(). wait_woken() uses
memory barriers in its implementation to avoid potential race condition
when putting a process into sleeping state and then waking it up.

Fixes: a1d617d8f134 ("nfs: allow blocking locks to be awoken by lock callbacks")
Cc: stable@vger.kernel.org #4.9+
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |   24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -6850,7 +6850,6 @@ struct nfs4_lock_waiter {
 	struct task_struct	*task;
 	struct inode		*inode;
 	struct nfs_lowner	*owner;
-	bool			notified;
 };
 
 static int
@@ -6872,13 +6871,13 @@ nfs4_wake_lock_waiter(wait_queue_entry_t
 		/* Make sure it's for the right inode */
 		if (nfs_compare_fh(NFS_FH(waiter->inode), &cbnl->cbnl_fh))
 			return 0;
-
-		waiter->notified = true;
 	}
 
 	/* override "private" so we can use default_wake_function */
 	wait->private = waiter->task;
-	ret = autoremove_wake_function(wait, mode, flags, key);
+	ret = woken_wake_function(wait, mode, flags, key);
+	if (ret)
+		list_del_init(&wait->entry);
 	wait->private = waiter;
 	return ret;
 }
@@ -6887,7 +6886,6 @@ static int
 nfs4_retry_setlk(struct nfs4_state *state, int cmd, struct file_lock *request)
 {
 	int status = -ERESTARTSYS;
-	unsigned long flags;
 	struct nfs4_lock_state *lsp = request->fl_u.nfs4_fl.owner;
 	struct nfs_server *server = NFS_SERVER(state->inode);
 	struct nfs_client *clp = server->nfs_client;
@@ -6897,8 +6895,7 @@ nfs4_retry_setlk(struct nfs4_state *stat
 				    .s_dev = server->s_dev };
 	struct nfs4_lock_waiter waiter = { .task  = current,
 					   .inode = state->inode,
-					   .owner = &owner,
-					   .notified = false };
+					   .owner = &owner};
 	wait_queue_entry_t wait;
 
 	/* Don't bother with waitqueue if we don't expect a callback */
@@ -6911,21 +6908,14 @@ nfs4_retry_setlk(struct nfs4_state *stat
 	add_wait_queue(q, &wait);
 
 	while(!signalled()) {
-		waiter.notified = false;
 		status = nfs4_proc_setlk(state, cmd, request);
 		if ((status != -EAGAIN) || IS_SETLK(cmd))
 			break;
 
 		status = -ERESTARTSYS;
-		spin_lock_irqsave(&q->lock, flags);
-		if (waiter.notified) {
-			spin_unlock_irqrestore(&q->lock, flags);
-			continue;
-		}
-		set_current_state(TASK_INTERRUPTIBLE);
-		spin_unlock_irqrestore(&q->lock, flags);
-
-		freezable_schedule_timeout(NFS4_LOCK_MAXTIMEOUT);
+		freezer_do_not_count();
+		wait_woken(&wait, TASK_INTERRUPTIBLE, NFS4_LOCK_MAXTIMEOUT);
+		freezer_count();
 	}
 
 	finish_wait(q, &wait);

[PATCH 4.19 21/51] NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled

[Greg Kroah-Hartman]

From: Yihao Wu <wuyihao@linux.alibaba.com>

commit ba851a39c9703f09684a541885ed176f8fb7c868 upstream.

When a waiter is waked by CB_NOTIFY_LOCK, it will retry
nfs4_proc_setlk(). The waiter may fail to nfs4_proc_setlk() and sleep
again. However, the waiter is already removed from clp->cl_lock_waitq
when handling CB_NOTIFY_LOCK in nfs4_wake_lock_waiter(). So any
subsequent CB_NOTIFY_LOCK won't wake this waiter anymore. We should
put the waiter back to clp->cl_lock_waitq before retrying.

Cc: stable@vger.kernel.org #4.9+
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -6905,20 +6905,22 @@ nfs4_retry_setlk(struct nfs4_state *stat
 	init_wait(&wait);
 	wait.private = &waiter;
 	wait.func = nfs4_wake_lock_waiter;
-	add_wait_queue(q, &wait);
 
 	while(!signalled()) {
+		add_wait_queue(q, &wait);
 		status = nfs4_proc_setlk(state, cmd, request);
-		if ((status != -EAGAIN) || IS_SETLK(cmd))
+		if ((status != -EAGAIN) || IS_SETLK(cmd)) {
+			finish_wait(q, &wait);
 			break;
+		}
 
 		status = -ERESTARTSYS;
 		freezer_do_not_count();
 		wait_woken(&wait, TASK_INTERRUPTIBLE, NFS4_LOCK_MAXTIMEOUT);
 		freezer_count();
+		finish_wait(q, &wait);
 	}
 
-	finish_wait(q, &wait);
 	return status;
 }
 #else /* !CONFIG_NFS_V4_1 */

[PATCH 4.19 22/51] fuse: fallocate: fix return with locked inode

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 35d6fcbb7c3e296a52136347346a698a35af3fda upstream.

Do the proper cleanup in case the size check fails.

Tested with xfstests:generic/228

Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 0cbade024ba5 ("fuse: honor RLIMIT_FSIZE in fuse_file_fallocate")
Cc: Liu Bo <bo.liu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v3.5
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fuse/file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2981,7 +2981,7 @@ static long fuse_file_fallocate(struct f
 	    offset + length > i_size_read(inode)) {
 		err = inode_newsize_ok(inode, offset + length);
 		if (err)
-			return err;
+			goto out;
 	}
 
 	if (!(mode & FALLOC_FL_KEEP_SIZE))

[PATCH 4.19 23/51] pstore: Remove needless lock during console writes

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit b77fa617a2ff4d6beccad3d3d4b3a1f2d10368aa upstream.

Since the console writer does not use the preallocated crash dump buffer
any more, there is no reason to perform locking around it.

Fixes: 70ad35db3321 ("pstore: Convert console write to use ->write_buf")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pstore/platform.c |   29 ++++++-----------------------
 1 file changed, 6 insertions(+), 23 deletions(-)

--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -476,31 +476,14 @@ static void pstore_unregister_kmsg(void)
 #ifdef CONFIG_PSTORE_CONSOLE
 static void pstore_console_write(struct console *con, const char *s, unsigned c)
 {
-	const char *e = s + c;
+	struct pstore_record record;
 
-	while (s < e) {
-		struct pstore_record record;
-		unsigned long flags;
+	pstore_record_init(&record, psinfo);
+	record.type = PSTORE_TYPE_CONSOLE;
 
-		pstore_record_init(&record, psinfo);
-		record.type = PSTORE_TYPE_CONSOLE;
-
-		if (c > psinfo->bufsize)
-			c = psinfo->bufsize;
-
-		if (oops_in_progress) {
-			if (!spin_trylock_irqsave(&psinfo->buf_lock, flags))
-				break;
-		} else {
-			spin_lock_irqsave(&psinfo->buf_lock, flags);
-		}
-		record.buf = (char *)s;
-		record.size = c;
-		psinfo->write(&record);
-		spin_unlock_irqrestore(&psinfo->buf_lock, flags);
-		s += c;
-		c = e - s;
-	}
+	record.buf = (char *)s;
+	record.size = c;
+	psinfo->write(&record);
 }
 
 static struct console pstore_console = {

[PATCH 4.19 24/51] pstore: Convert buf_lock to semaphore

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit ea84b580b95521644429cc6748b6c2bf27c8b0f3 upstream.

Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:

|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[<ffffffff99d60512>] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G      D           4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 21b3ddd39fee ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/nvram_64.c    |    2 -
 drivers/acpi/apei/erst.c          |    1 
 drivers/firmware/efi/efi-pstore.c |    4 ---
 fs/pstore/platform.c              |   44 +++++++++++++++++++-------------------
 fs/pstore/ram.c                   |    1 
 include/linux/pstore.h            |    7 ++----
 6 files changed, 27 insertions(+), 32 deletions(-)

--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -563,8 +563,6 @@ static int nvram_pstore_init(void)
 	nvram_pstore_info.buf = oops_data;
 	nvram_pstore_info.bufsize = oops_data_sz;
 
-	spin_lock_init(&nvram_pstore_info.buf_lock);
-
 	rc = pstore_register(&nvram_pstore_info);
 	if (rc && (rc != -EPERM))
 		/* Print error only when pstore.backend == nvram */
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -1176,7 +1176,6 @@ static int __init erst_init(void)
 	"Error Record Serialization Table (ERST) support is initialized.\n");
 
 	buf = kmalloc(erst_erange.size, GFP_KERNEL);
-	spin_lock_init(&erst_info.buf_lock);
 	if (buf) {
 		erst_info.buf = buf + sizeof(struct cper_pstore_record);
 		erst_info.bufsize = erst_erange.size -
--- a/drivers/firmware/efi/efi-pstore.c
+++ b/drivers/firmware/efi/efi-pstore.c
@@ -259,8 +259,7 @@ static int efi_pstore_write(struct pstor
 		efi_name[i] = name[i];
 
 	ret = efivar_entry_set_safe(efi_name, vendor, PSTORE_EFI_ATTRIBUTES,
-			      !pstore_cannot_block_path(record->reason),
-			      record->size, record->psi->buf);
+			      preemptible(), record->size, record->psi->buf);
 
 	if (record->reason == KMSG_DUMP_OOPS)
 		efivar_run_worker();
@@ -369,7 +368,6 @@ static __init int efivars_pstore_init(vo
 		return -ENOMEM;
 
 	efi_pstore_info.bufsize = 1024;
-	spin_lock_init(&efi_pstore_info.buf_lock);
 
 	if (pstore_register(&efi_pstore_info)) {
 		kfree(efi_pstore_info.buf);
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -124,26 +124,27 @@ static const char *get_reason_str(enum k
 	}
 }
 
-bool pstore_cannot_block_path(enum kmsg_dump_reason reason)
+/*
+ * Should pstore_dump() wait for a concurrent pstore_dump()? If
+ * not, the current pstore_dump() will report a failure to dump
+ * and return.
+ */
+static bool pstore_cannot_wait(enum kmsg_dump_reason reason)
 {
-	/*
-	 * In case of NMI path, pstore shouldn't be blocked
-	 * regardless of reason.
-	 */
+	/* In NMI path, pstore shouldn't block regardless of reason. */
 	if (in_nmi())
 		return true;
 
 	switch (reason) {
 	/* In panic case, other cpus are stopped by smp_send_stop(). */
 	case KMSG_DUMP_PANIC:
-	/* Emergency restart shouldn't be blocked by spin lock. */
+	/* Emergency restart shouldn't be blocked. */
 	case KMSG_DUMP_EMERG:
 		return true;
 	default:
 		return false;
 	}
 }
-EXPORT_SYMBOL_GPL(pstore_cannot_block_path);
 
 #if IS_ENABLED(CONFIG_PSTORE_DEFLATE_COMPRESS)
 static int zbufsize_deflate(size_t size)
@@ -378,23 +379,23 @@ static void pstore_dump(struct kmsg_dump
 	unsigned long	total = 0;
 	const char	*why;
 	unsigned int	part = 1;
-	unsigned long	flags = 0;
-	int		is_locked;
 	int		ret;
 
 	why = get_reason_str(reason);
 
-	if (pstore_cannot_block_path(reason)) {
-		is_locked = spin_trylock_irqsave(&psinfo->buf_lock, flags);
-		if (!is_locked) {
-			pr_err("pstore dump routine blocked in %s path, may corrupt error record\n"
-				       , in_nmi() ? "NMI" : why);
+	if (down_trylock(&psinfo->buf_lock)) {
+		/* Failed to acquire lock: give up if we cannot wait. */
+		if (pstore_cannot_wait(reason)) {
+			pr_err("dump skipped in %s path: may corrupt error record\n",
+				in_nmi() ? "NMI" : why);
+			return;
+		}
+		if (down_interruptible(&psinfo->buf_lock)) {
+			pr_err("could not grab semaphore?!\n");
 			return;
 		}
-	} else {
-		spin_lock_irqsave(&psinfo->buf_lock, flags);
-		is_locked = 1;
 	}
+
 	oopscount++;
 	while (total < kmsg_bytes) {
 		char *dst;
@@ -411,7 +412,7 @@ static void pstore_dump(struct kmsg_dump
 		record.part = part;
 		record.buf = psinfo->buf;
 
-		if (big_oops_buf && is_locked) {
+		if (big_oops_buf) {
 			dst = big_oops_buf;
 			dst_size = big_oops_buf_sz;
 		} else {
@@ -429,7 +430,7 @@ static void pstore_dump(struct kmsg_dump
 					  dst_size, &dump_size))
 			break;
 
-		if (big_oops_buf && is_locked) {
+		if (big_oops_buf) {
 			zipped_len = pstore_compress(dst, psinfo->buf,
 						header_size + dump_size,
 						psinfo->bufsize);
@@ -452,8 +453,8 @@ static void pstore_dump(struct kmsg_dump
 		total += record.size;
 		part++;
 	}
-	if (is_locked)
-		spin_unlock_irqrestore(&psinfo->buf_lock, flags);
+
+	up(&psinfo->buf_lock);
 }
 
 static struct kmsg_dumper pstore_dumper = {
@@ -572,6 +573,7 @@ int pstore_register(struct pstore_info *
 		psi->write_user = pstore_write_user_compat;
 	psinfo = psi;
 	mutex_init(&psinfo->read_mutex);
+	sema_init(&psinfo->buf_lock, 1);
 	spin_unlock(&pstore_lock);
 
 	if (owner && !try_module_get(owner)) {
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -814,7 +814,6 @@ static int ramoops_probe(struct platform
 		err = -ENOMEM;
 		goto fail_clear;
 	}
-	spin_lock_init(&cxt->pstore.buf_lock);
 
 	cxt->pstore.flags = PSTORE_FLAGS_DMESG;
 	if (cxt->console_size)
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -26,7 +26,7 @@
 #include <linux/errno.h>
 #include <linux/kmsg_dump.h>
 #include <linux/mutex.h>
-#include <linux/spinlock.h>
+#include <linux/semaphore.h>
 #include <linux/time.h>
 #include <linux/types.h>
 
@@ -88,7 +88,7 @@ struct pstore_record {
  * @owner:	module which is repsonsible for this backend driver
  * @name:	name of the backend driver
  *
- * @buf_lock:	spinlock to serialize access to @buf
+ * @buf_lock:	semaphore to serialize access to @buf
  * @buf:	preallocated crash dump buffer
  * @bufsize:	size of @buf available for crash dump bytes (must match
  *		smallest number of bytes available for writing to a
@@ -173,7 +173,7 @@ struct pstore_info {
 	struct module	*owner;
 	char		*name;
 
-	spinlock_t	buf_lock;
+	struct semaphore buf_lock;
 	char		*buf;
 	size_t		bufsize;
 
@@ -199,7 +199,6 @@ struct pstore_info {
 
 extern int pstore_register(struct pstore_info *);
 extern void pstore_unregister(struct pstore_info *);
-extern bool pstore_cannot_block_path(enum kmsg_dump_reason reason);
 
 struct pstore_ftrace_record {
 	unsigned long ip;

[PATCH 4.19 25/51] pstore: Set tfm to NULL on free_buf_for_compression

[Greg Kroah-Hartman]

From: Pi-Hsun Shih <pihsun@chromium.org>

commit a9fb94a99bb515d8720ba8440ce3aba84aec80f8 upstream.

Set tfm to NULL on free_buf_for_compression() after crypto_free_comp().

This avoid a use-after-free when allocate_buf_for_compression()
and free_buf_for_compression() are called twice. Although
free_buf_for_compression() freed the tfm, allocate_buf_for_compression()
won't reinitialize the tfm since the tfm pointer is not NULL.

Fixes: 95047b0519c1 ("pstore: Refactor compression initialization")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pstore/platform.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -324,8 +324,10 @@ static void allocate_buf_for_compression
 
 static void free_buf_for_compression(void)
 {
-	if (IS_ENABLED(CONFIG_PSTORE_COMPRESS) && tfm)
+	if (IS_ENABLED(CONFIG_PSTORE_COMPRESS) && tfm) {
 		crypto_free_comp(tfm);
+		tfm = NULL;
+	}
 	kfree(big_oops_buf);
 	big_oops_buf = NULL;
 	big_oops_buf_sz = 0;

[PATCH 4.19 26/51] pstore/ram: Run without kernel crash dump region

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 8880fa32c557600f5f624084152668ed3c2ea51e upstream.

The ram pstore backend has always had the crash dumper frontend enabled
unconditionally. However, it was possible to effectively disable it
by setting a record_size=0. All the machinery would run (storing dumps
to the temporary crash buffer), but 0 bytes would ultimately get stored
due to there being no przs allocated for dumps. Commit 89d328f637b9
("pstore/ram: Correctly calculate usable PRZ bytes"), however, assumed
that there would always be at least one allocated dprz for calculating
the size of the temporary crash buffer. This was, of course, not the
case when record_size=0, and would lead to a NULL deref trying to find
the dprz buffer size:

BUG: unable to handle kernel NULL pointer dereference at (null)
...
IP: ramoops_probe+0x285/0x37e (fs/pstore/ram.c:808)

        cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;

Instead, we need to only enable the frontends based on the success of the
prz initialization and only take the needed actions when those zones are
available. (This also fixes a possible error in detecting if the ftrace
frontend should be enabled.)

Reported-and-tested-by: Yaro Slav <yaro330@gmail.com>
Fixes: 89d328f637b9 ("pstore/ram: Correctly calculate usable PRZ bytes")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pstore/platform.c |    3 ++-
 fs/pstore/ram.c      |   36 +++++++++++++++++++++++-------------
 2 files changed, 25 insertions(+), 14 deletions(-)

--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -583,7 +583,8 @@ int pstore_register(struct pstore_info *
 		return -EINVAL;
 	}
 
-	allocate_buf_for_compression();
+	if (psi->flags & PSTORE_FLAGS_DMESG)
+		allocate_buf_for_compression();
 
 	if (pstore_is_mounted())
 		pstore_get_records(0);
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -803,26 +803,36 @@ static int ramoops_probe(struct platform
 
 	cxt->pstore.data = cxt;
 	/*
-	 * Since bufsize is only used for dmesg crash dumps, it
-	 * must match the size of the dprz record (after PRZ header
-	 * and ECC bytes have been accounted for).
+	 * Prepare frontend flags based on which areas are initialized.
+	 * For ramoops_init_przs() cases, the "max count" variable tells
+	 * if there are regions present. For ramoops_init_prz() cases,
+	 * the single region size is how to check.
 	 */
-	cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;
-	cxt->pstore.buf = kzalloc(cxt->pstore.bufsize, GFP_KERNEL);
-	if (!cxt->pstore.buf) {
-		pr_err("cannot allocate pstore crash dump buffer\n");
-		err = -ENOMEM;
-		goto fail_clear;
-	}
-
-	cxt->pstore.flags = PSTORE_FLAGS_DMESG;
+	cxt->pstore.flags = 0;
+	if (cxt->max_dump_cnt)
+		cxt->pstore.flags |= PSTORE_FLAGS_DMESG;
 	if (cxt->console_size)
 		cxt->pstore.flags |= PSTORE_FLAGS_CONSOLE;
-	if (cxt->ftrace_size)
+	if (cxt->max_ftrace_cnt)
 		cxt->pstore.flags |= PSTORE_FLAGS_FTRACE;
 	if (cxt->pmsg_size)
 		cxt->pstore.flags |= PSTORE_FLAGS_PMSG;
 
+	/*
+	 * Since bufsize is only used for dmesg crash dumps, it
+	 * must match the size of the dprz record (after PRZ header
+	 * and ECC bytes have been accounted for).
+	 */
+	if (cxt->pstore.flags & PSTORE_FLAGS_DMESG) {
+		cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;
+		cxt->pstore.buf = kzalloc(cxt->pstore.bufsize, GFP_KERNEL);
+		if (!cxt->pstore.buf) {
+			pr_err("cannot allocate pstore crash dump buffer\n");
+			err = -ENOMEM;
+			goto fail_clear;
+		}
+	}
+
 	err = pstore_register(&cxt->pstore);
 	if (err) {
 		pr_err("registering with pstore failed\n");

[PATCH 4.19 27/51] x86/power: Fix nosmt vs hibernation triple fault during resume

[Greg Kroah-Hartman]

From: Jiri Kosina <jkosina@suse.cz>

commit ec527c318036a65a083ef68d8ba95789d2212246 upstream.

As explained in

	0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")

we always, no matter what, have to bring up x86 HT siblings during boot at
least once in order to avoid first MCE bringing the system to its knees.

That means that whenever 'nosmt' is supplied on the kernel command-line,
all the HT siblings are as a result sitting in mwait or cpudile after
going through the online-offline cycle at least once.

This causes a serious issue though when a kernel, which saw 'nosmt' on its
commandline, is going to perform resume from hibernation: if the resume
from the hibernated image is successful, cr3 is flipped in order to point
to the address space of the kernel that is being resumed, which in turn
means that all the HT siblings are all of a sudden mwaiting on address
which is no longer valid.

That results in triple fault shortly after cr3 is switched, and machine
reboots.

Fix this by always waking up all the SMT siblings before initiating the
'restore from hibernation' process; this guarantees that all the HT
siblings will be properly carried over to the resumed kernel waiting in
resume_play_dead(), and acted upon accordingly afterwards, based on the
target kernel configuration.

Symmetricaly, the resumed kernel has to push the SMT siblings to mwait
again in case it has SMT disabled; this means it has to online all
the siblings when resuming (so that they come out of hlt) and offline
them again to let them reach mwait.

Cc: 4.19+ <stable@vger.kernel.org> # v4.19+
Debugged-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/power/cpu.c          |   10 ++++++++++
 arch/x86/power/hibernate_64.c |   33 +++++++++++++++++++++++++++++++++
 include/linux/cpu.h           |    4 ++++
 kernel/cpu.c                  |    4 ++--
 kernel/power/hibernate.c      |    9 +++++++++
 5 files changed, 58 insertions(+), 2 deletions(-)

--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -299,7 +299,17 @@ int hibernate_resume_nonboot_cpu_disable
 	 * address in its instruction pointer may not be possible to resolve
 	 * any more at that point (the page tables used by it previously may
 	 * have been overwritten by hibernate image data).
+	 *
+	 * First, make sure that we wake up all the potentially disabled SMT
+	 * threads which have been initially brought up and then put into
+	 * mwait/cpuidle sleep.
+	 * Those will be put to proper (not interfering with hibernation
+	 * resume) sleep afterwards, and the resumed kernel will decide itself
+	 * what to do with them.
 	 */
+	ret = cpuhp_smt_enable();
+	if (ret)
+		return ret;
 	smp_ops.play_dead = resume_play_dead;
 	ret = disable_nonboot_cpus();
 	smp_ops.play_dead = play_dead;
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -13,6 +13,7 @@
 #include <linux/suspend.h>
 #include <linux/scatterlist.h>
 #include <linux/kdebug.h>
+#include <linux/cpu.h>
 
 #include <crypto/hash.h>
 
@@ -363,3 +364,35 @@ int arch_hibernation_header_restore(void
 
 	return 0;
 }
+
+int arch_resume_nosmt(void)
+{
+	int ret = 0;
+	/*
+	 * We reached this while coming out of hibernation. This means
+	 * that SMT siblings are sleeping in hlt, as mwait is not safe
+	 * against control transition during resume (see comment in
+	 * hibernate_resume_nonboot_cpu_disable()).
+	 *
+	 * If the resumed kernel has SMT disabled, we have to take all the
+	 * SMT siblings out of hlt, and offline them again so that they
+	 * end up in mwait proper.
+	 *
+	 * Called with hotplug disabled.
+	 */
+	cpu_hotplug_enable();
+	if (cpu_smt_control == CPU_SMT_DISABLED ||
+			cpu_smt_control == CPU_SMT_FORCE_DISABLED) {
+		enum cpuhp_smt_control old = cpu_smt_control;
+
+		ret = cpuhp_smt_enable();
+		if (ret)
+			goto out;
+		ret = cpuhp_smt_disable(old);
+		if (ret)
+			goto out;
+	}
+out:
+	cpu_hotplug_disable();
+	return ret;
+}
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -183,10 +183,14 @@ enum cpuhp_smt_control {
 extern enum cpuhp_smt_control cpu_smt_control;
 extern void cpu_smt_disable(bool force);
 extern void cpu_smt_check_topology(void);
+extern int cpuhp_smt_enable(void);
+extern int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval);
 #else
 # define cpu_smt_control		(CPU_SMT_ENABLED)
 static inline void cpu_smt_disable(bool force) { }
 static inline void cpu_smt_check_topology(void) { }
+static inline int cpuhp_smt_enable(void) { return 0; }
+static inline int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval) { return 0; }
 #endif
 
 /*
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -2035,7 +2035,7 @@ static void cpuhp_online_cpu_device(unsi
 	kobject_uevent(&dev->kobj, KOBJ_ONLINE);
 }
 
-static int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
+int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
 {
 	int cpu, ret = 0;
 
@@ -2069,7 +2069,7 @@ static int cpuhp_smt_disable(enum cpuhp_
 	return ret;
 }
 
-static int cpuhp_smt_enable(void)
+int cpuhp_smt_enable(void)
 {
 	int cpu, ret = 0;
 
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -258,6 +258,11 @@ void swsusp_show_speed(ktime_t start, kt
 		(kps % 1000) / 10);
 }
 
+__weak int arch_resume_nosmt(void)
+{
+	return 0;
+}
+
 /**
  * create_image - Create a hibernation image.
  * @platform_mode: Whether or not to use the platform driver.
@@ -325,6 +330,10 @@ static int create_image(int platform_mod
  Enable_cpus:
 	enable_nonboot_cpus();
 
+	/* Allow architectures to do nosmt-specific post-resume dances */
+	if (!in_suspend)
+		error = arch_resume_nosmt();
+
  Platform_finish:
 	platform_finish(platform_mode);
 

[PATCH 4.19 28/51] x86/insn-eval: Fix use-after-free access to LDT entry

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit de9f869616dd95e95c00bdd6b0fcd3421e8a4323 upstream.

get_desc() computes a pointer into the LDT while holding a lock that
protects the LDT from being freed, but then drops the lock and returns the
(now potentially dangling) pointer to its caller.

Fix it by giving the caller a copy of the LDT entry instead.

Fixes: 670f928ba09b ("x86/insn-eval: Add utility function to get segment descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/lib/insn-eval.c |   47 ++++++++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 23 deletions(-)

--- a/arch/x86/lib/insn-eval.c
+++ b/arch/x86/lib/insn-eval.c
@@ -555,7 +555,8 @@ static int get_reg_offset_16(struct insn
 }
 
 /**
- * get_desc() - Obtain pointer to a segment descriptor
+ * get_desc() - Obtain contents of a segment descriptor
+ * @out:	Segment descriptor contents on success
  * @sel:	Segment selector
  *
  * Given a segment selector, obtain a pointer to the segment descriptor.
@@ -563,18 +564,18 @@ static int get_reg_offset_16(struct insn
  *
  * Returns:
  *
- * Pointer to segment descriptor on success.
+ * True on success, false on failure.
  *
  * NULL on error.
  */
-static struct desc_struct *get_desc(unsigned short sel)
+static bool get_desc(struct desc_struct *out, unsigned short sel)
 {
 	struct desc_ptr gdt_desc = {0, 0};
 	unsigned long desc_base;
 
 #ifdef CONFIG_MODIFY_LDT_SYSCALL
 	if ((sel & SEGMENT_TI_MASK) == SEGMENT_LDT) {
-		struct desc_struct *desc = NULL;
+		bool success = false;
 		struct ldt_struct *ldt;
 
 		/* Bits [15:3] contain the index of the desired entry. */
@@ -582,12 +583,14 @@ static struct desc_struct *get_desc(unsi
 
 		mutex_lock(&current->active_mm->context.lock);
 		ldt = current->active_mm->context.ldt;
-		if (ldt && sel < ldt->nr_entries)
-			desc = &ldt->entries[sel];
+		if (ldt && sel < ldt->nr_entries) {
+			*out = ldt->entries[sel];
+			success = true;
+		}
 
 		mutex_unlock(&current->active_mm->context.lock);
 
-		return desc;
+		return success;
 	}
 #endif
 	native_store_gdt(&gdt_desc);
@@ -602,9 +605,10 @@ static struct desc_struct *get_desc(unsi
 	desc_base = sel & ~(SEGMENT_RPL_MASK | SEGMENT_TI_MASK);
 
 	if (desc_base > gdt_desc.size)
-		return NULL;
+		return false;
 
-	return (struct desc_struct *)(gdt_desc.address + desc_base);
+	*out = *(struct desc_struct *)(gdt_desc.address + desc_base);
+	return true;
 }
 
 /**
@@ -626,7 +630,7 @@ static struct desc_struct *get_desc(unsi
  */
 unsigned long insn_get_seg_base(struct pt_regs *regs, int seg_reg_idx)
 {
-	struct desc_struct *desc;
+	struct desc_struct desc;
 	short sel;
 
 	sel = get_segment_selector(regs, seg_reg_idx);
@@ -664,11 +668,10 @@ unsigned long insn_get_seg_base(struct p
 	if (!sel)
 		return -1L;
 
-	desc = get_desc(sel);
-	if (!desc)
+	if (!get_desc(&desc, sel))
 		return -1L;
 
-	return get_desc_base(desc);
+	return get_desc_base(&desc);
 }
 
 /**
@@ -690,7 +693,7 @@ unsigned long insn_get_seg_base(struct p
  */
 static unsigned long get_seg_limit(struct pt_regs *regs, int seg_reg_idx)
 {
-	struct desc_struct *desc;
+	struct desc_struct desc;
 	unsigned long limit;
 	short sel;
 
@@ -704,8 +707,7 @@ static unsigned long get_seg_limit(struc
 	if (!sel)
 		return 0;
 
-	desc = get_desc(sel);
-	if (!desc)
+	if (!get_desc(&desc, sel))
 		return 0;
 
 	/*
@@ -714,8 +716,8 @@ static unsigned long get_seg_limit(struc
 	 * not tested when checking the segment limits. In practice,
 	 * this means that the segment ends in (limit << 12) + 0xfff.
 	 */
-	limit = get_desc_limit(desc);
-	if (desc->g)
+	limit = get_desc_limit(&desc);
+	if (desc.g)
 		limit = (limit << 12) + 0xfff;
 
 	return limit;
@@ -739,7 +741,7 @@ static unsigned long get_seg_limit(struc
  */
 int insn_get_code_seg_params(struct pt_regs *regs)
 {
-	struct desc_struct *desc;
+	struct desc_struct desc;
 	short sel;
 
 	if (v8086_mode(regs))
@@ -750,8 +752,7 @@ int insn_get_code_seg_params(struct pt_r
 	if (sel < 0)
 		return sel;
 
-	desc = get_desc(sel);
-	if (!desc)
+	if (!get_desc(&desc, sel))
 		return -EINVAL;
 
 	/*
@@ -759,10 +760,10 @@ int insn_get_code_seg_params(struct pt_r
 	 * determines whether a segment contains data or code. If this is a data
 	 * segment, return error.
 	 */
-	if (!(desc->type & BIT(3)))
+	if (!(desc.type & BIT(3)))
 		return -EINVAL;
 
-	switch ((desc->l << 1) | desc->d) {
+	switch ((desc.l << 1) | desc.d) {
 	case 0: /*
 		 * Legacy mode. CS.L=0, CS.D=0. Address and operand size are
 		 * both 16-bit.

[PATCH 4.19 29/51] i2c: xiic: Add max_read_len quirk

[Greg Kroah-Hartman]

From: Robert Hancock <hancock@sedsystems.ca>

commit 49b809586730a77b57ce620b2f9689de765d790b upstream.

This driver does not support reading more than 255 bytes at once because
the register for storing the number of bytes to read is only 8 bits. Add
a max_read_len quirk to enforce this.

This was found when using this driver with the SFP driver, which was
previously reading all 256 bytes in the SFP EEPROM in one transaction.
This caused a bunch of hard-to-debug errors in the xiic driver since the
driver/logic was treating the number of bytes to read as zero.
Rejecting transactions that aren't supported at least allows the problem
to be diagnosed more easily.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-xiic.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -718,11 +718,16 @@ static const struct i2c_algorithm xiic_a
 	.functionality = xiic_func,
 };
 
+static const struct i2c_adapter_quirks xiic_quirks = {
+	.max_read_len = 255,
+};
+
 static const struct i2c_adapter xiic_adapter = {
 	.owner = THIS_MODULE,
 	.name = DRIVER_NAME,
 	.class = I2C_CLASS_DEPRECATED,
 	.algo = &xiic_algorithm,
+	.quirks = &xiic_quirks,
 };
 
 

[PATCH 4.19 30/51] s390/mm: fix address space detection in exception handling

[Greg Kroah-Hartman]

From: Gerald Schaefer <gerald.schaefer@de.ibm.com>

commit 962f0af83c239c0aef05639631e871c874b00f99 upstream.

Commit 0aaba41b58bc ("s390: remove all code using the access register
mode") removed access register mode from the kernel, and also from the
address space detection logic. However, user space could still switch
to access register mode (trans_exc_code == 1), and exceptions in that
mode would not be correctly assigned.

Fix this by adding a check for trans_exc_code == 1 to get_fault_type(),
and remove the wrong comment line before that function.

Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/mm/fault.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -107,7 +107,6 @@ void bust_spinlocks(int yes)
 
 /*
  * Find out which address space caused the exception.
- * Access register mode is impossible, ignore space == 3.
  */
 static inline enum fault_type get_fault_type(struct pt_regs *regs)
 {
@@ -132,6 +131,10 @@ static inline enum fault_type get_fault_
 		}
 		return VDSO_FAULT;
 	}
+	if (trans_exc_code == 1) {
+		/* access register mode, not used in the kernel */
+		return USER_FAULT;
+	}
 	/* home space exception -> access via kernel ASCE */
 	return KERNEL_FAULT;
 }

[PATCH 4.19 31/51] xen-blkfront: switch kcalloc to kvcalloc for large array allocation

[Greg Kroah-Hartman]

From: Roger Pau Monne <roger.pau@citrix.com>

commit 1d5c76e66433382a1e170d1d5845bb0fed7467aa upstream.

There's no reason to request physically contiguous memory for those
allocations.

[boris: added CC to stable]

Cc: stable@vger.kernel.org
Reported-by: Ian Jackson <ian.jackson@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkfront.c |   38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1310,11 +1310,11 @@ static void blkif_free_ring(struct blkfr
 		}
 
 free_shadow:
-		kfree(rinfo->shadow[i].grants_used);
+		kvfree(rinfo->shadow[i].grants_used);
 		rinfo->shadow[i].grants_used = NULL;
-		kfree(rinfo->shadow[i].indirect_grants);
+		kvfree(rinfo->shadow[i].indirect_grants);
 		rinfo->shadow[i].indirect_grants = NULL;
-		kfree(rinfo->shadow[i].sg);
+		kvfree(rinfo->shadow[i].sg);
 		rinfo->shadow[i].sg = NULL;
 	}
 
@@ -1353,7 +1353,7 @@ static void blkif_free(struct blkfront_i
 	for (i = 0; i < info->nr_rings; i++)
 		blkif_free_ring(&info->rinfo[i]);
 
-	kfree(info->rinfo);
+	kvfree(info->rinfo);
 	info->rinfo = NULL;
 	info->nr_rings = 0;
 }
@@ -1914,9 +1914,9 @@ static int negotiate_mq(struct blkfront_
 	if (!info->nr_rings)
 		info->nr_rings = 1;
 
-	info->rinfo = kcalloc(info->nr_rings,
-			      sizeof(struct blkfront_ring_info),
-			      GFP_KERNEL);
+	info->rinfo = kvcalloc(info->nr_rings,
+			       sizeof(struct blkfront_ring_info),
+			       GFP_KERNEL);
 	if (!info->rinfo) {
 		xenbus_dev_fatal(info->xbdev, -ENOMEM, "allocating ring_info structure");
 		info->nr_rings = 0;
@@ -2232,17 +2232,17 @@ static int blkfront_setup_indirect(struc
 
 	for (i = 0; i < BLK_RING_SIZE(info); i++) {
 		rinfo->shadow[i].grants_used =
-			kcalloc(grants,
-				sizeof(rinfo->shadow[i].grants_used[0]),
-				GFP_NOIO);
-		rinfo->shadow[i].sg = kcalloc(psegs,
-					      sizeof(rinfo->shadow[i].sg[0]),
-					      GFP_NOIO);
+			kvcalloc(grants,
+				 sizeof(rinfo->shadow[i].grants_used[0]),
+				 GFP_NOIO);
+		rinfo->shadow[i].sg = kvcalloc(psegs,
+					       sizeof(rinfo->shadow[i].sg[0]),
+					       GFP_NOIO);
 		if (info->max_indirect_segments)
 			rinfo->shadow[i].indirect_grants =
-				kcalloc(INDIRECT_GREFS(grants),
-					sizeof(rinfo->shadow[i].indirect_grants[0]),
-					GFP_NOIO);
+				kvcalloc(INDIRECT_GREFS(grants),
+					 sizeof(rinfo->shadow[i].indirect_grants[0]),
+					 GFP_NOIO);
 		if ((rinfo->shadow[i].grants_used == NULL) ||
 			(rinfo->shadow[i].sg == NULL) ||
 		     (info->max_indirect_segments &&
@@ -2256,11 +2256,11 @@ static int blkfront_setup_indirect(struc
 
 out_of_memory:
 	for (i = 0; i < BLK_RING_SIZE(info); i++) {
-		kfree(rinfo->shadow[i].grants_used);
+		kvfree(rinfo->shadow[i].grants_used);
 		rinfo->shadow[i].grants_used = NULL;
-		kfree(rinfo->shadow[i].sg);
+		kvfree(rinfo->shadow[i].sg);
 		rinfo->shadow[i].sg = NULL;
-		kfree(rinfo->shadow[i].indirect_grants);
+		kvfree(rinfo->shadow[i].indirect_grants);
 		rinfo->shadow[i].indirect_grants = NULL;
 	}
 	if (!list_empty(&rinfo->indirect_pages)) {

[PATCH 4.19 32/51] MIPS: Bounds check virt_addr_valid

[Greg Kroah-Hartman]

From: Paul Burton <paul.burton@mips.com>

commit 074a1e1167afd82c26f6d03a9a8b997d564bb241 upstream.

The virt_addr_valid() function is meant to return true iff
virt_to_page() will return a valid struct page reference. This is true
iff the address provided is found within the unmapped address range
between PAGE_OFFSET & MAP_BASE, but we don't currently check for that
condition. Instead we simply mask the address to obtain what will be a
physical address if the virtual address is indeed in the desired range,
shift it to form a PFN & then call pfn_valid(). This can incorrectly
return true if called with a virtual address which, after masking,
happens to form a physical address corresponding to a valid PFN.

For example we may vmalloc an address in the kernel mapped region
starting a MAP_BASE & obtain the virtual address:

  addr = 0xc000000000002000

When masked by virt_to_phys(), which uses __pa() & in turn CPHYSADDR(),
we obtain the following (bogus) physical address:

  addr = 0x2000

In a common system with PHYS_OFFSET=0 this will correspond to a valid
struct page which should really be accessed by virtual address
PAGE_OFFSET+0x2000, causing virt_addr_valid() to incorrectly return 1
indicating that the original address corresponds to a struct page.

This is equivalent to the ARM64 change made in commit ca219452c6b8
("arm64: Correctly bounds check virt_addr_valid").

This fixes fallout when hardened usercopy is enabled caused by the
related commit 517e1fbeb65f ("mm/usercopy: Drop extra
is_vmalloc_or_module() check") which removed a check for the vmalloc
range that was present from the introduction of the hardened usercopy
feature.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: YunQiang Su <ysu@wavecomp.com>
URL: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=929366
Cc: stable@vger.kernel.org # v4.12+
Cc: linux-mips@vger.kernel.org
Cc: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/mmap.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -203,6 +203,11 @@ unsigned long arch_randomize_brk(struct
 
 int __virt_addr_valid(const volatile void *kaddr)
 {
+	unsigned long vaddr = (unsigned long)vaddr;
+
+	if ((vaddr < PAGE_OFFSET) || (vaddr >= MAP_BASE))
+		return 0;
+
 	return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
 }
 EXPORT_SYMBOL_GPL(__virt_addr_valid);

[PATCH 4.19 33/51] MIPS: pistachio: Build uImage.gz by default

[Greg Kroah-Hartman]

From: Paul Burton <paul.burton@mips.com>

commit e4f2d1af7163becb181419af9dece9206001e0a6 upstream.

The pistachio platform uses the U-Boot bootloader & generally boots a
kernel in the uImage format. As such it's useful to build one when
building the kernel, but to do so currently requires the user to
manually specify a uImage target on the make command line.

Make uImage.gz the pistachio platform's default build target, so that
the default is to build a kernel image that we can actually boot on a
board such as the MIPS Creator Ci40.

Marked for stable backport as far as v4.1 where pistachio support was
introduced. This is primarily useful for CI systems such as kernelci.org
which will benefit from us building a suitable image which can then be
booted as part of automated testing, extending our test coverage to the
affected stable branches.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
URL: https://groups.io/g/kernelci/message/388
Cc: stable@vger.kernel.org # v4.1+
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/pistachio/Platform |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/mips/pistachio/Platform
+++ b/arch/mips/pistachio/Platform
@@ -6,3 +6,4 @@ cflags-$(CONFIG_MACH_PISTACHIO)		+=				\
 		-I$(srctree)/arch/mips/include/asm/mach-pistachio
 load-$(CONFIG_MACH_PISTACHIO)		+= 0xffffffff80400000
 zload-$(CONFIG_MACH_PISTACHIO)		+= 0xffffffff81000000
+all-$(CONFIG_MACH_PISTACHIO)		:= uImage.gz

[PATCH 4.19 34/51] Revert "MIPS: perf: ath79: Fix perfcount IRQ assignment"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit ca8648816e3dcc8dadba0e79a034f61c85eb206d which is
commit a1e8783db8e0d58891681bc1e6d9ada66eae8e20 upstream.

Petr writes:
	Karl has reported to me today, that he's experiencing weird
	reboot hang on his devices with 4.9.180 kernel and that he has
	bisected it down to my backported patch.

	I would like to kindly ask you for removal of this patch.  This
	patch should be reverted from all stable kernels up to 5.1,
	because perf counters were not broken on those kernels, and this
	patch won't work on the ath79 legacy IRQ code anyway, it needs
	new irqchip driver which was enabled on ath79 with commit
	51fa4f8912c0 ("MIPS: ath79: drop legacy IRQ code").

Reported-by: Petr Štetiar <ynezz@true.cz>
Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Cc: John Crispin <john@phrozen.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/ath79/setup.c          |    6 ++++++
 drivers/irqchip/irq-ath79-misc.c |   11 -----------
 2 files changed, 6 insertions(+), 11 deletions(-)

--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -211,6 +211,12 @@ const char *get_system_type(void)
 	return ath79_sys_type;
 }
 
+int get_c0_perfcount_int(void)
+{
+	return ATH79_MISC_IRQ(5);
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
 unsigned int get_c0_compare_int(void)
 {
 	return CP0_LEGACY_COMPARE_IRQ;
--- a/drivers/irqchip/irq-ath79-misc.c
+++ b/drivers/irqchip/irq-ath79-misc.c
@@ -22,15 +22,6 @@
 #define AR71XX_RESET_REG_MISC_INT_ENABLE	4
 
 #define ATH79_MISC_IRQ_COUNT			32
-#define ATH79_MISC_PERF_IRQ			5
-
-static int ath79_perfcount_irq;
-
-int get_c0_perfcount_int(void)
-{
-	return ath79_perfcount_irq;
-}
-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
 
 static void ath79_misc_irq_handler(struct irq_desc *desc)
 {
@@ -122,8 +113,6 @@ static void __init ath79_misc_intc_domai
 {
 	void __iomem *base = domain->host_data;
 
-	ath79_perfcount_irq = irq_create_mapping(domain, ATH79_MISC_PERF_IRQ);
-
 	/* Disable and clear all interrupts */
 	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
 	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);

[PATCH 4.19 35/51] genwqe: Prevent an integer overflow in the ioctl

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 110080cea0d0e4dfdb0b536e7f8a5633ead6a781 upstream.

There are a couple potential integer overflows here.

	round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE);

The first thing is that the "m->size + (...)" addition could overflow,
and the second is that round_up() overflows to zero if the result is
within PAGE_SIZE of the type max.

In this code, the "m->size" variable is an u64 but we're saving the
result in "map_size" which is an unsigned long and genwqe_user_vmap()
takes an unsigned long as well.  So I have used ULONG_MAX as the upper
bound.  From a practical perspective unsigned long is fine/better than
trying to change all the types to u64.

Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/genwqe/card_dev.c   |    2 ++
 drivers/misc/genwqe/card_utils.c |    4 ++++
 2 files changed, 6 insertions(+)

--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@@ -780,6 +780,8 @@ static int genwqe_pin_mem(struct genwqe_
 
 	if ((m->addr == 0x0) || (m->size == 0))
 		return -EINVAL;
+	if (m->size > ULONG_MAX - PAGE_SIZE - (m->addr & ~PAGE_MASK))
+		return -EINVAL;
 
 	map_addr = (m->addr & PAGE_MASK);
 	map_size = round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE);
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -587,6 +587,10 @@ int genwqe_user_vmap(struct genwqe_dev *
 	/* determine space needed for page_list. */
 	data = (unsigned long)uaddr;
 	offs = offset_in_page(data);
+	if (size > ULONG_MAX - PAGE_SIZE - offs) {
+		m->size = 0;	/* mark unused and not added */
+		return -EINVAL;
+	}
 	m->nr_pages = DIV_ROUND_UP(offs + size, PAGE_SIZE);
 
 	m->page_list = kcalloc(m->nr_pages,

[PATCH 4.19 36/51] test_firmware: Use correct snprintf() limit

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit bd17cc5a20ae9aaa3ed775f360b75ff93cd66a1d upstream.

The limit here is supposed to be how much of the page is left, but it's
just using PAGE_SIZE as the limit.

The other thing to remember is that snprintf() returns the number of
bytes which would have been copied if we had had enough room.  So that
means that if we run out of space then this code would end up passing a
negative value as the limit and the kernel would print an error message.
I have change the code to use scnprintf() which returns the number of
bytes that were successfully printed (not counting the NUL terminator).

Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/test_firmware.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -223,30 +223,30 @@ static ssize_t config_show(struct device
 
 	mutex_lock(&test_fw_mutex);
 
-	len += snprintf(buf, PAGE_SIZE,
+	len += scnprintf(buf, PAGE_SIZE - len,
 			"Custom trigger configuration for: %s\n",
 			dev_name(dev));
 
 	if (test_fw_config->name)
-		len += snprintf(buf+len, PAGE_SIZE,
+		len += scnprintf(buf+len, PAGE_SIZE - len,
 				"name:\t%s\n",
 				test_fw_config->name);
 	else
-		len += snprintf(buf+len, PAGE_SIZE,
+		len += scnprintf(buf+len, PAGE_SIZE - len,
 				"name:\tEMTPY\n");
 
-	len += snprintf(buf+len, PAGE_SIZE,
+	len += scnprintf(buf+len, PAGE_SIZE - len,
 			"num_requests:\t%u\n", test_fw_config->num_requests);
 
-	len += snprintf(buf+len, PAGE_SIZE,
+	len += scnprintf(buf+len, PAGE_SIZE - len,
 			"send_uevent:\t\t%s\n",
 			test_fw_config->send_uevent ?
 			"FW_ACTION_HOTPLUG" :
 			"FW_ACTION_NOHOTPLUG");
-	len += snprintf(buf+len, PAGE_SIZE,
+	len += scnprintf(buf+len, PAGE_SIZE - len,
 			"sync_direct:\t\t%s\n",
 			test_fw_config->sync_direct ? "true" : "false");
-	len += snprintf(buf+len, PAGE_SIZE,
+	len += scnprintf(buf+len, PAGE_SIZE - len,
 			"read_fw_idx:\t%u\n", test_fw_config->read_fw_idx);
 
 	mutex_unlock(&test_fw_mutex);

[PATCH 4.19 37/51] drm/gma500/cdv: Check vbt config bits when detecting lvds panels

[Greg Kroah-Hartman]

From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

commit 7c420636860a719049fae9403e2c87804f53bdde upstream.

Some machines have an lvds child device in vbt even though a panel is
not attached. To make detection more reliable we now also check the lvds
config bits available in the vbt.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1665766
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416114607.1072-1-patrik.r.jakobsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/gma500/cdv_intel_lvds.c |    3 +++
 drivers/gpu/drm/gma500/intel_bios.c     |    3 +++
 drivers/gpu/drm/gma500/psb_drv.h        |    1 +
 3 files changed, 7 insertions(+)

--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -594,6 +594,9 @@ void cdv_intel_lvds_init(struct drm_devi
 	int pipe;
 	u8 pin;
 
+	if (!dev_priv->lvds_enabled_in_vbt)
+		return;
+
 	pin = GMBUS_PORT_PANEL;
 	if (!lvds_is_present_in_vbt(dev, &pin)) {
 		DRM_DEBUG_KMS("LVDS is not present in VBT\n");
--- a/drivers/gpu/drm/gma500/intel_bios.c
+++ b/drivers/gpu/drm/gma500/intel_bios.c
@@ -436,6 +436,9 @@ parse_driver_features(struct drm_psb_pri
 	if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
 		dev_priv->edp.support = 1;
 
+	dev_priv->lvds_enabled_in_vbt = driver->lvds_config != 0;
+	DRM_DEBUG_KMS("LVDS VBT config bits: 0x%x\n", driver->lvds_config);
+
 	/* This bit means to use 96Mhz for DPLL_A or not */
 	if (driver->primary_lfp_id)
 		dev_priv->dplla_96mhz = true;
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -538,6 +538,7 @@ struct drm_psb_private {
 	int lvds_ssc_freq;
 	bool is_lvds_on;
 	bool is_mipi_on;
+	bool lvds_enabled_in_vbt;
 	u32 mipi_ctrl_display;
 
 	unsigned int core_freq;

[PATCH 4.19 38/51] drm/msm: fix fb references in async update

[Greg Kroah-Hartman]

From: Helen Koike <helen.koike@collabora.com>

commit 474d952b4870cfbdc55d3498f4d498775fe77e81 upstream.

Async update callbacks are expected to set the old_fb in the new_state
so prepare/cleanup framebuffers are balanced.

Cc: <stable@vger.kernel.org> # v4.14+
Fixes: 224a4c970987 ("drm/msm: update cursors asynchronously through atomic")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-4-helen.koike@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c
@@ -503,6 +503,8 @@ static int mdp5_plane_atomic_async_check
 static void mdp5_plane_atomic_async_update(struct drm_plane *plane,
 					   struct drm_plane_state *new_state)
 {
+	struct drm_framebuffer *old_fb = plane->state->fb;
+
 	plane->state->src_x = new_state->src_x;
 	plane->state->src_y = new_state->src_y;
 	plane->state->crtc_x = new_state->crtc_x;
@@ -525,6 +527,8 @@ static void mdp5_plane_atomic_async_upda
 
 	*to_mdp5_plane_state(plane->state) =
 		*to_mdp5_plane_state(new_state);
+
+	new_state->fb = old_fb;
 }
 
 static const struct drm_plane_helper_funcs mdp5_plane_helper_funcs = {

[PATCH 4.19 39/51] drm: add non-desktop quirk for Valve HMDs

[Greg Kroah-Hartman]

From: Andres Rodriguez <andresx7@gmail.com>

commit 30d62d4453e49f85dd17b2ba60bbb68b6593dba0 upstream.

Add vendor/product pairs for the Valve Index HMDs.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502193157.15692-1-andresx7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_edid.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -172,6 +172,25 @@ static const struct edid_quirk {
 	/* Rotel RSX-1058 forwards sink's EDID but only does HDMI 1.1*/
 	{ "ETR", 13896, EDID_QUIRK_FORCE_8BPC },
 
+	/* Valve Index Headset */
+	{ "VLV", 0x91a8, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b0, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b1, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b2, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b3, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b4, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b5, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b6, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b7, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b8, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91b9, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91ba, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91bb, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91bc, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91bd, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91be, EDID_QUIRK_NON_DESKTOP },
+	{ "VLV", 0x91bf, EDID_QUIRK_NON_DESKTOP },
+
 	/* HTC Vive and Vive Pro VR Headsets */
 	{ "HVR", 0xaa01, EDID_QUIRK_NON_DESKTOP },
 	{ "HVR", 0xaa02, EDID_QUIRK_NON_DESKTOP },

[PATCH 4.19 40/51] drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)

[Greg Kroah-Hartman]

From: Dave Airlie <airlied@redhat.com>

commit b30a43ac7132cdda833ac4b13dd1ebd35ace14b7 upstream.

There was a nouveau DDX that relied on legacy context ioctls to work,
but we fixed it years ago, give distros that have a modern DDX the
option to break the uAPI and close the mess of holes that legacy
context support is.

Full context of the story:

commit 0e975980d435d58df2d430d688b8c18778b42218
Author: Peter Antoine <peter.antoine@intel.com>
Date:   Tue Jun 23 08:18:49 2015 +0100

    drm: Turn off Legacy Context Functions

    The context functions are not used by the i915 driver and should not
    be used by modeset drivers. These driver functions contain several bugs
    and security holes. This change makes these functions optional can be
    turned on by a setting, they are turned off by default for modeset
    driver with the exception of the nouvea driver that may require them with
    an old version of libdrm.

    The previous attempt was

    commit 7c510133d93dd6f15ca040733ba7b2891ed61fd1
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Aug 8 15:41:21 2013 +0200

        drm: mark context support as a legacy subsystem

    but this had to be reverted

    commit c21eb21cb50d58e7cbdcb8b9e7ff68b85cfa5095
    Author: Dave Airlie <airlied@redhat.com>
    Date:   Fri Sep 20 08:32:59 2013 +1000

        Revert "drm: mark context support as a legacy subsystem"

    v2: remove returns from void function, and formatting (Daniel Vetter)

    v3:
    - s/Nova/nouveau/ in the commit message, and add references to the
      previous attempts
    - drop the part touching the drm hw lock, that should be a separate
      patch.

    Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2)
    Cc: Peter Antoine <peter.antoine@intel.com> (v2)
    Reviewed-by: Peter Antoine <peter.antoine@intel.com>
    Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

v2: move DRM_VM dependency into legacy config.
v3: fix missing dep (kbuild robot)

Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/Kconfig       |   13 ++++++++++++-
 drivers/gpu/drm/nouveau/nouveau_drm.c |    7 +++++--
 2 files changed, 17 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/nouveau/Kconfig
+++ b/drivers/gpu/drm/nouveau/Kconfig
@@ -16,10 +16,21 @@ config DRM_NOUVEAU
 	select INPUT if ACPI && X86
 	select THERMAL if ACPI && X86
 	select ACPI_VIDEO if ACPI && X86
-	select DRM_VM
 	help
 	  Choose this option for open-source NVIDIA support.
 
+config NOUVEAU_LEGACY_CTX_SUPPORT
+	bool "Nouveau legacy context support"
+	depends on DRM_NOUVEAU
+	select DRM_VM
+	default y
+	help
+	  There was a version of the nouveau DDX that relied on legacy
+	  ctx ioctls not erroring out. But that was back in time a long
+	  ways, so offer a way to disable it now. For uapi compat with
+	  old nouveau ddx this should be on by default, but modern distros
+	  should consider turning it off.
+
 config NOUVEAU_PLATFORM_DRIVER
 	bool "Nouveau (NVIDIA) SoC GPUs"
 	depends on DRM_NOUVEAU && ARCH_TEGRA
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -1015,8 +1015,11 @@ nouveau_driver_fops = {
 static struct drm_driver
 driver_stub = {
 	.driver_features =
-		DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | DRIVER_RENDER |
-		DRIVER_KMS_LEGACY_CONTEXT,
+		DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | DRIVER_RENDER
+#if defined(CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT)
+		| DRIVER_KMS_LEGACY_CONTEXT
+#endif
+		,
 
 	.load = nouveau_drm_load,
 	.unload = nouveau_drm_unload,

[PATCH 4.19 41/51] drm: add non-desktop quirks to Sensics and OSVR headsets.

[Greg Kroah-Hartman]

From: Ryan Pavlik <ryan.pavlik@collabora.com>

commit 29054230f3e11ea818eccfa7bb4e4b3e89544164 upstream.

Add two EDID vendor/product pairs used across a variety of
Sensics products, as well as the OSVR HDK and HDK 2.

Signed-off-by: Ryan Pavlik <ryan.pavlik@collabora.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203164644.13974-1-ryan.pavlik@collabora.com
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_edid.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -212,6 +212,12 @@ static const struct edid_quirk {
 
 	/* Sony PlayStation VR Headset */
 	{ "SNY", 0x0704, EDID_QUIRK_NON_DESKTOP },
+
+	/* Sensics VR Headsets */
+	{ "SEN", 0x1019, EDID_QUIRK_NON_DESKTOP },
+
+	/* OSVR HDK and HDK2 VR Headsets */
+	{ "SVR", 0x1019, EDID_QUIRK_NON_DESKTOP },
 };
 
 /*

[PATCH 4.19 42/51] drm/amdgpu/psp: move psp version specific function pointers to early_init

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

commit 9d6fea5744d6798353f37ac42a8a653a2607ca69 upstream.

In case we need to use them for GPU reset prior initializing the
asic.  Fixes a crash if the driver attempts to reset the GPU at driver
load time.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -37,18 +37,10 @@ static void psp_set_funcs(struct amdgpu_
 static int psp_early_init(void *handle)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+	struct psp_context *psp = &adev->psp;
 
 	psp_set_funcs(adev);
 
-	return 0;
-}
-
-static int psp_sw_init(void *handle)
-{
-	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
-	struct psp_context *psp = &adev->psp;
-	int ret;
-
 	switch (adev->asic_type) {
 	case CHIP_VEGA10:
 	case CHIP_VEGA12:
@@ -67,6 +59,15 @@ static int psp_sw_init(void *handle)
 	if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP)
 		return 0;
 
+	return 0;
+}
+
+static int psp_sw_init(void *handle)
+{
+	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+	struct psp_context *psp = &adev->psp;
+	int ret;
+
 	ret = psp_init_microcode(psp);
 	if (ret) {
 		DRM_ERROR("Failed to load psp firmware!\n");

[PATCH 4.19 43/51] drm/radeon: prefer lower reference dividers

[Greg Kroah-Hartman]

From: Christian König <christian.koenig@amd.com>

commit 2e26ccb119bde03584be53406bbd22e711b0d6e6 upstream.

Instead of the closest reference divider prefer the lowest,
this fixes flickering issues on HP Compaq nx9420.

Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=108514
Suggested-by: Paul Dufresne <dufresnep@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_display.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -921,12 +921,12 @@ static void avivo_get_fb_ref_div(unsigne
 	ref_div_max = max(min(100 / post_div, ref_div_max), 1u);
 
 	/* get matching reference and feedback divider */
-	*ref_div = min(max(DIV_ROUND_CLOSEST(den, post_div), 1u), ref_div_max);
+	*ref_div = min(max(den/post_div, 1u), ref_div_max);
 	*fb_div = DIV_ROUND_CLOSEST(nom * *ref_div * post_div, den);
 
 	/* limit fb divider to its maximum */
 	if (*fb_div > fb_div_max) {
-		*ref_div = DIV_ROUND_CLOSEST(*ref_div * fb_div_max, *fb_div);
+		*ref_div = (*ref_div * fb_div_max)/(*fb_div);
 		*fb_div = fb_div_max;
 	}
 }

[PATCH 4.19 44/51] drm/amdgpu: remove ATPX_DGPU_REQ_POWER_FOR_DISPLAYS check when hotplug-in

[Greg Kroah-Hartman]

From: Aaron Liu <aaron.liu@amd.com>

commit bdb1ccb080dafc1b4224873a5b759ff85a7d1c10 upstream.

In amdgpu_atif_handler, when hotplug event received, remove
ATPX_DGPU_REQ_POWER_FOR_DISPLAYS check. This bit's check will cause missing
system resume.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
@@ -416,8 +416,7 @@ static int amdgpu_atif_handler(struct am
 			}
 		}
 		if (req.pending & ATIF_DGPU_DISPLAY_EVENT) {
-			if ((adev->flags & AMD_IS_PX) &&
-			    amdgpu_atpx_dgpu_req_power_for_displays()) {
+			if (adev->flags & AMD_IS_PX) {
 				pm_runtime_get_sync(adev->ddev->dev);
 				/* Just fire off a uevent and let userspace tell us what to do */
 				drm_helper_hpd_irq_event(adev->ddev);

[PATCH 4.19 45/51] drm/i915: Fix I915_EXEC_RING_MASK

[Greg Kroah-Hartman]

From: Chris Wilson <chris@chris-wilson.co.uk>

commit d90c06d57027203f73021bb7ddb30b800d65c636 upstream.

This was supposed to be a mask of all known rings, but it is being used
by execbuffer to filter out invalid rings, and so is instead mapping high
unused values onto valid rings. Instead of a mask of all known rings,
we need it to be the mask of all possible rings.

Fixes: 549f7365820a ("drm/i915: Enable SandyBridge blitter ring")
Fixes: de1add360522 ("drm/i915: Decouple execbuf uAPI from internal implementation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-21-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/drm/i915_drm.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -942,7 +942,7 @@ struct drm_i915_gem_execbuffer2 {
 	 * struct drm_i915_gem_exec_fence *fences.
 	 */
 	__u64 cliprects_ptr;
-#define I915_EXEC_RING_MASK              (7<<0)
+#define I915_EXEC_RING_MASK              (0x3f)
 #define I915_EXEC_DEFAULT                (0<<0)
 #define I915_EXEC_RENDER                 (1<<0)
 #define I915_EXEC_BSD                    (2<<0)

[PATCH 4.19 46/51] drm/amdgpu/soc15: skip reset on init

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

commit 5887a59961e2295c5b02f39dbc0ecf9212709b7b upstream.

Not necessary on soc15 and breaks driver reload on server cards.

Acked-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/soc15.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -495,6 +495,11 @@ int soc15_set_ip_blocks(struct amdgpu_de
 		return -EINVAL;
 	}
 
+	/* Just return false for soc15 GPUs.  Reset does not seem to
+	 * be necessary.
+	 */
+	return false;
+
 	if (adev->flags & AMD_IS_APU)
 		adev->nbio_funcs = &nbio_v7_0_funcs;
 	else if (adev->asic_type == CHIP_VEGA20)

[PATCH 4.19 47/51] drm/i915/fbc: disable framebuffer compression on GeminiLake

[Greg Kroah-Hartman]

From: Daniel Drake <drake@endlessm.com>

commit 396dd8143bdd94bd1c358a228a631c8c895a1126 upstream.

On many (all?) the Gemini Lake systems we work with, there is frequent
momentary graphical corruption at the top of the screen, and it seems
that disabling framebuffer compression can avoid this.

The ticket was reported 6 months ago and has already affected a
multitude of users, without any real progress being made. So, lets
disable framebuffer compression on GeminiLake until a solution is found.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108085
Fixes: fd7d6c5c8f3e ("drm/i915: enable FBC on gen9+ too")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423092810.28359-1-jian-hong@endlessm.com
(cherry picked from commit 1d25724b41fad7eeb2c3058a5c8190d6ece73e08)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_fbc.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/i915/intel_fbc.c
+++ b/drivers/gpu/drm/i915/intel_fbc.c
@@ -1267,6 +1267,10 @@ static int intel_sanitize_fbc_option(str
 	if (!HAS_FBC(dev_priv))
 		return 0;
 
+	/* https://bugs.freedesktop.org/show_bug.cgi?id=108085 */
+	if (IS_GEMINILAKE(dev_priv))
+		return 0;
+
 	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9)
 		return 1;
 

[PATCH 4.19 48/51] drm/i915: Maintain consistent documentation subsection ordering

[Greg Kroah-Hartman]

From: Jonathan Corbet <corbet@lwn.net>

commit 551bd3368a7b3cfef01edaade8970948d178d40a upstream.

With Sphinx 2.0 (or prior versions with the deprecation warnings fixed) the
docs build fails with:

  Documentation/gpu/i915.rst:403: WARNING: Title level inconsistent:

  Global GTT Fence Handling
  ~~~~~~~~~~~~~~~~~~~~~~~~~

  reST markup error:
  Documentation/gpu/i915.rst:403: (SEVERE/4) Title level inconsistent:

I "fixed" it by changing the subsections in i915.rst, but that didn't seem
like the correct change.  It turns out that a couple of i915 files create
their own subsections in kerneldoc comments using apostrophes as the
heading marker:

  Layout
  ''''''

That breaks the normal subsection marker ordering, and newer Sphinx is
rather more strict about enforcing that ordering.  So fix the offending
comments to make Sphinx happy.

(This is unfortunate, in that kerneldoc comments shouldn't need to be aware
of where they might be included in the heading hierarchy, but I don't see
a better way around it).

Cc: stable@vger.kernel.org  # v4.14+
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_reg.h          |    6 +++---
 drivers/gpu/drm/i915/intel_workarounds.c |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -32,7 +32,7 @@
  * macros. Do **not** mass change existing definitions just to update the style.
  *
  * Layout
- * ''''''
+ * ~~~~~~
  *
  * Keep helper macros near the top. For example, _PIPE() and friends.
  *
@@ -78,7 +78,7 @@
  * style. Use lower case in hexadecimal values.
  *
  * Naming
- * ''''''
+ * ~~~~~~
  *
  * Try to name registers according to the specs. If the register name changes in
  * the specs from platform to another, stick to the original name.
@@ -96,7 +96,7 @@
  * suffix to the name. For example, ``_SKL`` or ``_GEN8``.
  *
  * Examples
- * ''''''''
+ * ~~~~~~~~
  *
  * (Note that the values in the example are indented using spaces instead of
  * TABs to avoid misalignment in generated documentation. Use TABs in the
--- a/drivers/gpu/drm/i915/intel_workarounds.c
+++ b/drivers/gpu/drm/i915/intel_workarounds.c
@@ -37,7 +37,7 @@
  *    costly and simplifies things. We can revisit this in the future.
  *
  * Layout
- * ''''''
+ * ~~~~~~
  *
  * Keep things in this file ordered by WA type, as per the above (context, GT,
  * display, register whitelist, batchbuffer). Then, inside each type, keep the

[PATCH 4.19 49/51] drm: dont block fb changes for async plane updates

[Greg Kroah-Hartman]

From: Helen Koike <helen.koike@collabora.com>

commit 89a4aac0ab0e6f5eea10d7bf4869dd15c3de2cd4 upstream.

In the case of a normal sync update, the preparation of framebuffers (be
it calling drm_atomic_helper_prepare_planes() or doing setups with
drm_framebuffer_get()) are performed in the new_state and the respective
cleanups are performed in the old_state.

In the case of async updates, the preparation is also done in the
new_state but the cleanups are done in the new_state (because updates
are performed in place, i.e. in the current state).

The current code blocks async udpates when the fb is changed, turning
async updates into sync updates, slowing down cursor updates and
introducing regressions in igt tests with errors of type:

"CRITICAL: completed 97 cursor updated in a period of 30 flips, we
expect to complete approximately 15360 updates, with the threshold set
at 7680"

Fb changes in async updates were prevented to avoid the following scenario:

- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong)
Where we have a single call to prepare fb2 but double cleanup call to fb2.

To solve the above problems, instead of blocking async fb changes, we
place the old framebuffer in the new_state object, so when the code
performs cleanups in the new_state it will cleanup the old_fb and we
will have the following scenario instead:

- Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2

Where calls to prepare/cleanup are balanced.

Cc: <stable@vger.kernel.org> # v4.14+
Fixes: 25dc194b34dd ("drm: Block fb changes for async plane updates")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-6-helen.koike@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_atomic_helper.c      |   22 ++++++++++++----------
 include/drm/drm_modeset_helper_vtables.h |    8 ++++++++
 2 files changed, 20 insertions(+), 10 deletions(-)

--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -1573,15 +1573,6 @@ int drm_atomic_helper_async_check(struct
 	if (old_plane_state->fb != new_plane_state->fb)
 		return -EINVAL;
 
-	/*
-	 * FIXME: Since prepare_fb and cleanup_fb are always called on
-	 * the new_plane_state for async updates we need to block framebuffer
-	 * changes. This prevents use of a fb that's been cleaned up and
-	 * double cleanups from occuring.
-	 */
-	if (old_plane_state->fb != new_plane_state->fb)
-		return -EINVAL;
-
 	funcs = plane->helper_private;
 	if (!funcs->atomic_async_update)
 		return -EINVAL;
@@ -1612,6 +1603,8 @@ EXPORT_SYMBOL(drm_atomic_helper_async_ch
  * drm_atomic_async_check() succeeds. Async commits are not supposed to swap
  * the states like normal sync commits, but just do in-place changes on the
  * current state.
+ *
+ * TODO: Implement full swap instead of doing in-place changes.
  */
 void drm_atomic_helper_async_commit(struct drm_device *dev,
 				    struct drm_atomic_state *state)
@@ -1622,6 +1615,9 @@ void drm_atomic_helper_async_commit(stru
 	int i;
 
 	for_each_new_plane_in_state(state, plane, plane_state, i) {
+		struct drm_framebuffer *new_fb = plane_state->fb;
+		struct drm_framebuffer *old_fb = plane->state->fb;
+
 		funcs = plane->helper_private;
 		funcs->atomic_async_update(plane, plane_state);
 
@@ -1630,11 +1626,17 @@ void drm_atomic_helper_async_commit(stru
 		 * plane->state in-place, make sure at least common
 		 * properties have been properly updated.
 		 */
-		WARN_ON_ONCE(plane->state->fb != plane_state->fb);
+		WARN_ON_ONCE(plane->state->fb != new_fb);
 		WARN_ON_ONCE(plane->state->crtc_x != plane_state->crtc_x);
 		WARN_ON_ONCE(plane->state->crtc_y != plane_state->crtc_y);
 		WARN_ON_ONCE(plane->state->src_x != plane_state->src_x);
 		WARN_ON_ONCE(plane->state->src_y != plane_state->src_y);
+
+		/*
+		 * Make sure the FBs have been swapped so that cleanups in the
+		 * new_state performs a cleanup in the old FB.
+		 */
+		WARN_ON_ONCE(plane_state->fb != old_fb);
 	}
 }
 EXPORT_SYMBOL(drm_atomic_helper_async_commit);
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -1174,6 +1174,14 @@ struct drm_plane_helper_funcs {
 	 * current one with the new plane configurations in the new
 	 * plane_state.
 	 *
+	 * Drivers should also swap the framebuffers between current plane
+	 * state (&drm_plane.state) and new_state.
+	 * This is required since cleanup for async commits is performed on
+	 * the new state, rather than old state like for traditional commits.
+	 * Since we want to give up the reference on the current (old) fb
+	 * instead of our brand new one, swap them in the driver during the
+	 * async commit.
+	 *
 	 * FIXME:
 	 *  - It only works for single plane updates
 	 *  - Async Pageflips are not supported yet

[PATCH 4.19 50/51] drm/i915/gvt: Initialize intel_gvt_gtt_entry in stack

[Greg Kroah-Hartman]

From: Tina Zhang <tina.zhang@intel.com>

commit 387a4c2b55291b37e245c840813bd8a8bd06ed49 upstream.

Stack struct intel_gvt_gtt_entry value needs to be initialized before
being used, as the fields may contain garbage values.

W/o this patch, set_ggtt_entry prints:
-------------------------------------
274.046840: set_ggtt_entry: vgpu1:set ggtt entry 0x9bed8000ffffe900
274.046846: set_ggtt_entry: vgpu1:set ggtt entry 0xe55df001
274.046852: set_ggtt_entry: vgpu1:set ggtt entry 0x9bed8000ffffe900

0x9bed8000 is the stack grabage.

W/ this patch, set_ggtt_entry prints:
------------------------------------
274.046840: set_ggtt_entry: vgpu1:set ggtt entry 0xffffe900
274.046846: set_ggtt_entry: vgpu1:set ggtt entry 0xe55df001
274.046852: set_ggtt_entry: vgpu1:set ggtt entry 0xffffe900

v2:
- Initialize during declaration. (Zhenyu)

Fixes: 7598e8700e9a ("drm/i915/gvt: Missed to cancel dma map for ggtt entries")
Cc: stable@vger.kernel.org # v4.20+
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/gvt/gtt.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/gvt/gtt.c
+++ b/drivers/gpu/drm/i915/gvt/gtt.c
@@ -2161,7 +2161,8 @@ static int emulate_ggtt_mmio_write(struc
 	struct intel_gvt_gtt_pte_ops *ops = gvt->gtt.pte_ops;
 	unsigned long g_gtt_index = off >> info->gtt_entry_size_shift;
 	unsigned long gma, gfn;
-	struct intel_gvt_gtt_entry e, m;
+	struct intel_gvt_gtt_entry e = {.val64 = 0, .type = GTT_TYPE_GGTT_PTE};
+	struct intel_gvt_gtt_entry m = {.val64 = 0, .type = GTT_TYPE_GGTT_PTE};
 	dma_addr_t dma_addr;
 	int ret;
 
@@ -2237,7 +2238,8 @@ static int emulate_ggtt_mmio_write(struc
 
 	if (ops->test_present(&e)) {
 		gfn = ops->get_pfn(&e);
-		m = e;
+		m.val64 = e.val64;
+		m.type = e.type;
 
 		/* one PTE update may be issued in multiple writes and the
 		 * first write may not construct a valid gfn

[PATCH 4.19 51/51] TTY: serial_core, add ->install

[Greg Kroah-Hartman]

From: Jiri Slaby <jslaby@suse.cz>

commit 4cdd17ba1dff20ffc99fdbd2e6f0201fc7fe67df upstream.

We need to compute the uart state only on the first open. This is
usually what is done in the ->install hook. serial_core used to do this
in ->open on every open. So move it to ->install.

As a side effect, it ensures the state is set properly in the window
after tty_init_dev is called, but before uart_open. This fixes a bunch
of races between tty_open and flush_to_ldisc we were dealing with
recently.

One of such bugs was attempted to fix in commit fedb5760648a (serial:
fix race between flush_to_ldisc and tty_open), but it only took care of
a couple of functions (uart_start and uart_unthrottle).  I was able to
reproduce the crash on a SLE system, but in uart_write_room which is
also called from flush_to_ldisc via process_echoes. I was *unable* to
reproduce the bug locally. It is due to having this patch in my queue
since 2012!

 general protection fault: 0000 [#1] SMP KASAN PTI
 CPU: 1 PID: 5 Comm: kworker/u4:0 Tainted: G             L 4.12.14-396-default #1 SLE15-SP1 (unreleased)
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
 Workqueue: events_unbound flush_to_ldisc
 task: ffff8800427d8040 task.stack: ffff8800427f0000
 RIP: 0010:uart_write_room+0xc4/0x590
 RSP: 0018:ffff8800427f7088 EFLAGS: 00010202
 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 000000000000002f RSI: 00000000000000ee RDI: ffff88003888bd90
 RBP: ffffffffb9545850 R08: 0000000000000001 R09: 0000000000000400
 R10: ffff8800427d825c R11: 000000000000006e R12: 1ffff100084fee12
 R13: ffffc900004c5000 R14: ffff88003888bb28 R15: 0000000000000178
 FS:  0000000000000000(0000) GS:ffff880043300000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000561da0794148 CR3: 000000000ebf4000 CR4: 00000000000006e0
 Call Trace:
  tty_write_room+0x6d/0xc0
  __process_echoes+0x55/0x870
  n_tty_receive_buf_common+0x105e/0x26d0
  tty_ldisc_receive_buf+0xb7/0x1c0
  tty_port_default_receive_buf+0x107/0x180
  flush_to_ldisc+0x35d/0x5c0
...

0 in rbx means tty->driver_data is NULL in uart_write_room. 0x178 is
tried to be dereferenced (0x178 >> 3 is 0x2f in rdx) at
uart_write_room+0xc4. 0x178 is exactly (struct uart_state *)NULL->refcount
used in uart_port_lock from uart_write_room.

So revert the upstream commit here as my local patch should fix the
whole family.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Wang Li <wangli39@baidu.com>
Cc: Zhang Yu <zhangyu31@baidu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/serial_core.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -130,9 +130,6 @@ static void uart_start(struct tty_struct
 	struct uart_port *port;
 	unsigned long flags;
 
-	if (!state)
-		return;
-
 	port = uart_port_lock(state, flags);
 	__uart_start(tty);
 	uart_port_unlock(port, flags);
@@ -730,9 +727,6 @@ static void uart_unthrottle(struct tty_s
 	upstat_t mask = UPSTAT_SYNC_FIFO;
 	struct uart_port *port;
 
-	if (!state)
-		return;
-
 	port = uart_port_ref(state);
 	if (!port)
 		return;
@@ -1708,6 +1702,16 @@ static void uart_dtr_rts(struct tty_port
 	uart_port_deref(uport);
 }
 
+static int uart_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+	struct uart_driver *drv = driver->driver_state;
+	struct uart_state *state = drv->state + tty->index;
+
+	tty->driver_data = state;
+
+	return tty_standard_install(driver, tty);
+}
+
 /*
  * Calls to uart_open are serialised by the tty_lock in
  *   drivers/tty/tty_io.c:tty_open()
@@ -1720,11 +1724,8 @@ static void uart_dtr_rts(struct tty_port
  */
 static int uart_open(struct tty_struct *tty, struct file *filp)
 {
-	struct uart_driver *drv = tty->driver->driver_state;
-	int retval, line = tty->index;
-	struct uart_state *state = drv->state + line;
-
-	tty->driver_data = state;
+	struct uart_state *state = tty->driver_data;
+	int retval;
 
 	retval = tty_port_open(&state->port, tty, filp);
 	if (retval > 0)
@@ -2409,6 +2410,7 @@ static void uart_poll_put_char(struct tt
 #endif
 
 static const struct tty_operations uart_ops = {
+	.install	= uart_install,
 	.open		= uart_open,
 	.close		= uart_close,
 	.write		= uart_write,

Re: [PATCH 4.19 00/51] 4.19.50-stable review

[Naresh Kamboju]

On Sun, 9 Jun 2019 at 22:17, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.50 release.
> There are 51 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue 11 Jun 2019 04:40:08 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.50-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.19.50-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 4954dbe53dd310cc698cab437bfe8bd965d26685
git describe: v4.19.48-126-g4954dbe53dd3
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.48-126-g4954dbe53dd3

No regressions (compared to build v4.19.48)

No fixes (compared to build v4.19.48)

Ran 24961 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 01/51] ethtool: fix potential userspace buffer overflow

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1359 bytes --]

Hi!

> From: Vivien Didelot <vivien.didelot@gmail.com>
> 
> [ Upstream commit 0ee4e76937d69128a6a66861ba393ebdc2ffc8a2 ]
> 
> ethtool_get_regs() allocates a buffer of size ops->get_regs_len(),
> and pass it to the kernel driver via ops->get_regs() for filling.
> 
> There is no restriction about what the kernel drivers can or cannot do
> with the open ethtool_regs structure. They usually set regs->version
> and ignore regs->len or set it to the same size as ops->get_regs_len().
> 
> But if userspace allocates a smaller buffer for the registers dump,
> we would cause a userspace buffer overflow in the final copy_to_user()
> call, which uses the regs.len value potentially reset by the driver.
> 
> To fix this, make this case obvious and store regs.len before calling
> ops->get_regs(), to only copy as much data as requested by userspace,
> up to the value returned by ops->get_regs_len().
> 
> While at it, remove the redundant check for non-null regbuf.

Mainline differs from 4.19-stable here, and while the non-null check
is redundant in -mainline, it does not seem to be redundant in
-stable.

In stable, if get_regs_len() returns < 0, we'll pass it to vzalloc.

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 01/51] ethtool: fix potential userspace buffer overflow

[Michal Kubecek]

On Mon, Jun 10, 2019 at 10:21:12AM +0200, Pavel Machek wrote:
> Hi!
> 
> > From: Vivien Didelot <vivien.didelot@gmail.com>
> > 
> > [ Upstream commit 0ee4e76937d69128a6a66861ba393ebdc2ffc8a2 ]
> > 
> > ethtool_get_regs() allocates a buffer of size ops->get_regs_len(),
> > and pass it to the kernel driver via ops->get_regs() for filling.
> > 
> > There is no restriction about what the kernel drivers can or cannot do
> > with the open ethtool_regs structure. They usually set regs->version
> > and ignore regs->len or set it to the same size as ops->get_regs_len().
> > 
> > But if userspace allocates a smaller buffer for the registers dump,
> > we would cause a userspace buffer overflow in the final copy_to_user()
> > call, which uses the regs.len value potentially reset by the driver.
> > 
> > To fix this, make this case obvious and store regs.len before calling
> > ops->get_regs(), to only copy as much data as requested by userspace,
> > up to the value returned by ops->get_regs_len().
> > 
> > While at it, remove the redundant check for non-null regbuf.
> 
> Mainline differs from 4.19-stable here, and while the non-null check
> is redundant in -mainline, it does not seem to be redundant in
> -stable.
> 
> In stable, if get_regs_len() returns < 0, we'll pass it to vzalloc.

Right. :-(

I guess we should also pick commit f9fc54d313fa ("ethtool: check the
return value of get_regs_len") to stable branches before 5.0.

Michal

Re: [PATCH 4.19 00/51] 4.19.50-stable review

[Jon Hunter]

On 09/06/2019 17:41, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.50 release.
> There are 51 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue 11 Jun 2019 04:40:08 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.50-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.19:
    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.19.50-rc1-g4954dbe53dd3
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.19 01/51] ethtool: fix potential userspace buffer overflow

[Greg Kroah-Hartman]

On Mon, Jun 10, 2019 at 10:42:29AM +0200, Michal Kubecek wrote:
> On Mon, Jun 10, 2019 at 10:21:12AM +0200, Pavel Machek wrote:
> > Hi!
> > 
> > > From: Vivien Didelot <vivien.didelot@gmail.com>
> > > 
> > > [ Upstream commit 0ee4e76937d69128a6a66861ba393ebdc2ffc8a2 ]
> > > 
> > > ethtool_get_regs() allocates a buffer of size ops->get_regs_len(),
> > > and pass it to the kernel driver via ops->get_regs() for filling.
> > > 
> > > There is no restriction about what the kernel drivers can or cannot do
> > > with the open ethtool_regs structure. They usually set regs->version
> > > and ignore regs->len or set it to the same size as ops->get_regs_len().
> > > 
> > > But if userspace allocates a smaller buffer for the registers dump,
> > > we would cause a userspace buffer overflow in the final copy_to_user()
> > > call, which uses the regs.len value potentially reset by the driver.
> > > 
> > > To fix this, make this case obvious and store regs.len before calling
> > > ops->get_regs(), to only copy as much data as requested by userspace,
> > > up to the value returned by ops->get_regs_len().
> > > 
> > > While at it, remove the redundant check for non-null regbuf.
> > 
> > Mainline differs from 4.19-stable here, and while the non-null check
> > is redundant in -mainline, it does not seem to be redundant in
> > -stable.
> > 
> > In stable, if get_regs_len() returns < 0, we'll pass it to vzalloc.
> 
> Right. :-(
> 
> I guess we should also pick commit f9fc54d313fa ("ethtool: check the
> return value of get_regs_len") to stable branches before 5.0.

Now queued up, thanks.

greg k-h

Re: [PATCH 4.19 46/51] drm/amdgpu/soc15: skip reset on init

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1163 bytes --]

Hi!

> From: Alex Deucher <alexander.deucher@amd.com>
> 
> commit 5887a59961e2295c5b02f39dbc0ecf9212709b7b upstream.
> 
> Not necessary on soc15 and breaks driver reload on server cards.

> --- a/drivers/gpu/drm/amd/amdgpu/soc15.c
> +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
> @@ -495,6 +495,11 @@ int soc15_set_ip_blocks(struct amdgpu_de
>  		return -EINVAL;
>  	}
>  
> +	/* Just return false for soc15 GPUs.  Reset does not seem to
> +	 * be necessary.
> +	 */
> +	return false;
> +
>  	if (adev->flags & AMD_IS_APU)
>  		adev->nbio_funcs = &nbio_v7_0_funcs;
>  	else if (adev->asic_type == CHIP_VEGA20)

Something is seriously wrong here.

Upstream commit goes to soc15_need_reset_on_init() and creates dead
variable and quite a bit of dead code. Is that intended?

But this stable version... goes to different function, and returns
false in function returning 0/-EINVAL, simulating success. New place
does not seem right; it seems like patch misplaced it.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 46/51] drm/amdgpu/soc15: skip reset on init

[Greg Kroah-Hartman]

On Mon, Jun 10, 2019 at 04:31:46PM +0200, Pavel Machek wrote:
> Hi!
> 
> > From: Alex Deucher <alexander.deucher@amd.com>
> > 
> > commit 5887a59961e2295c5b02f39dbc0ecf9212709b7b upstream.
> > 
> > Not necessary on soc15 and breaks driver reload on server cards.
> 
> > --- a/drivers/gpu/drm/amd/amdgpu/soc15.c
> > +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
> > @@ -495,6 +495,11 @@ int soc15_set_ip_blocks(struct amdgpu_de
> >  		return -EINVAL;
> >  	}
> >  
> > +	/* Just return false for soc15 GPUs.  Reset does not seem to
> > +	 * be necessary.
> > +	 */
> > +	return false;
> > +
> >  	if (adev->flags & AMD_IS_APU)
> >  		adev->nbio_funcs = &nbio_v7_0_funcs;
> >  	else if (adev->asic_type == CHIP_VEGA20)
> 
> Something is seriously wrong here.
> 
> Upstream commit goes to soc15_need_reset_on_init() and creates dead
> variable and quite a bit of dead code. Is that intended?
> 
> But this stable version... goes to different function, and returns
> false in function returning 0/-EINVAL, simulating success. New place
> does not seem right; it seems like patch misplaced it.

Ah, good catch!  This happened in the 4.14.y tree, so I had to drop the
patch from there, for some reason I missed checking the 4.19.y backport
(I had validated that 5.1.y got it right.)

Now dropped from the queue, thanks!

greg k-h

Re: [PATCH 4.19 00/51] 4.19.50-stable review

[Guenter Roeck]

On Sun, Jun 09, 2019 at 06:41:41PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.50 release.
> There are 51 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue 11 Jun 2019 04:40:08 PM UTC.
> Anything received after that time might be too late.
> 
Build results:
	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 351 pass: 351 fail: 0

Guenter

Re: [PATCH 4.19 00/51] 4.19.50-stable review

[shuah]

On 6/9/19 10:41 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.50 release.
> There are 51 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue 11 Jun 2019 04:40:08 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.50-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah