[PATCH 1/3] media: vsp1: drm: Split vsp1_du_setup_lif()

[PATCH 1/3] media: vsp1: drm: Split vsp1_du_setup_lif()

[Kieran Bingham]

Break vsp1_du_setup_lif() into components more suited to the DRM Atomic
API. The existing vsp1_du_setup_lif() API call is maintained as it is
still used from the DU.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
 drivers/media/platform/vsp1/vsp1_drm.c | 233 ++++++++++++++++++-------
 include/media/vsp1.h                   |  32 +++-
 2 files changed, 199 insertions(+), 66 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index a4a45d68a6ef..ce5c0780680f 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -616,18 +616,15 @@ int vsp1_du_init(struct device *dev)
 EXPORT_SYMBOL_GPL(vsp1_du_init);
 
 /**
- * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
+ * vsp1_du_atomic_modeset - Configure the mode as part of an atomic update
  * @dev: the VSP device
  * @pipe_index: the DRM pipeline index
- * @cfg: the LIF configuration
+ * @cfg: the mode configuration
  *
  * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
  * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
  * source pads, and the LIF sink pad.
  *
- * The @pipe_index argument selects which DRM pipeline to setup. The number of
- * available pipelines depend on the VSP instance.
- *
  * As the media bus code on the blend unit source pad is conditioned by the
  * configuration of its sink 0 pad, we also set up the formats on all blend unit
  * sinks, even if the configuration will be overwritten later by
@@ -635,15 +632,14 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
  * a well defined state.
  *
  * Return 0 on success or a negative error code on failure.
+ *
  */
-int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
-		      const struct vsp1_du_lif_config *cfg)
+int vsp1_du_atomic_modeset(struct device *dev, unsigned int pipe_index,
+			   const struct vsp1_du_modeset_config *cfg)
 {
 	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 	struct vsp1_drm_pipeline *drm_pipe;
 	struct vsp1_pipeline *pipe;
-	unsigned long flags;
-	unsigned int i;
 	int ret;
 
 	if (pipe_index >= vsp1->info->lif_count)
@@ -652,60 +648,6 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 	drm_pipe = &vsp1->drm->pipe[pipe_index];
 	pipe = &drm_pipe->pipe;
 
-	if (!cfg) {
-		struct vsp1_brx *brx;
-
-		mutex_lock(&vsp1->drm->lock);
-
-		brx = to_brx(&pipe->brx->subdev);
-
-		/*
-		 * NULL configuration means the CRTC is being disabled, stop
-		 * the pipeline and turn the light off.
-		 */
-		ret = vsp1_pipeline_stop(pipe);
-		if (ret == -ETIMEDOUT)
-			dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
-
-		for (i = 0; i < ARRAY_SIZE(pipe->inputs); ++i) {
-			struct vsp1_rwpf *rpf = pipe->inputs[i];
-
-			if (!rpf)
-				continue;
-
-			/*
-			 * Remove the RPF from the pipe and the list of BRx
-			 * inputs.
-			 */
-			WARN_ON(!rpf->entity.pipe);
-			rpf->entity.pipe = NULL;
-			list_del(&rpf->entity.list_pipe);
-			pipe->inputs[i] = NULL;
-
-			brx->inputs[rpf->brx_input].rpf = NULL;
-		}
-
-		drm_pipe->du_complete = NULL;
-		pipe->num_inputs = 0;
-
-		dev_dbg(vsp1->dev, "%s: pipe %u: releasing %s\n",
-			__func__, pipe->lif->index,
-			BRX_NAME(pipe->brx));
-
-		list_del(&pipe->brx->list_pipe);
-		pipe->brx->pipe = NULL;
-		pipe->brx = NULL;
-
-		mutex_unlock(&vsp1->drm->lock);
-
-		vsp1_dlm_reset(pipe->output->dlm);
-		vsp1_device_put(vsp1);
-
-		dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
-
-		return 0;
-	}
-
 	drm_pipe->width = cfg->width;
 	drm_pipe->height = cfg->height;
 	pipe->interlaced = cfg->interlaced;
@@ -722,8 +664,43 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 		goto unlock;
 
 	ret = vsp1_du_pipeline_setup_output(vsp1, pipe);
-	if (ret < 0)
-		goto unlock;
+
+unlock:
+	mutex_unlock(&vsp1->drm->lock);
+
+	return ret;
+}
+
+/**
+ * vsp1_du_atomic_enable - Enable and start a DU pipeline
+ * @dev: the VSP device
+ * @pipe_index: the DRM pipeline index
+ * @cfg: the enablement configuration
+ *
+ * The @pipe_index argument selects which DRM pipeline to enable. The number of
+ * available pipelines depend on the VSP instance.
+ *
+ * The configuration passes a callback function to register notification of
+ * frame completion events.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+int vsp1_du_atomic_enable(struct device *dev, unsigned int pipe_index,
+			  const struct vsp1_du_enable_config *cfg)
+{
+	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
+	struct vsp1_drm_pipeline *drm_pipe;
+	struct vsp1_pipeline *pipe;
+	unsigned long flags;
+	int ret;
+
+	if (pipe_index >= vsp1->info->lif_count)
+		return -EINVAL;
+
+	drm_pipe = &vsp1->drm->pipe[pipe_index];
+	pipe = &drm_pipe->pipe;
+
+	mutex_lock(&vsp1->drm->lock);
 
 	/* Enable the VSP1. */
 	ret = vsp1_device_get(vsp1);
@@ -758,6 +735,132 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 	dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__);
 
 	return 0;
+
+}
+EXPORT_SYMBOL_GPL(vsp1_du_atomic_enable);
+
+
+/**
+ * vsp1_du_atomic_disable - Disable and stop a DU pipeline
+ * @dev: the VSP device
+ * @pipe_index: the DRM pipeline index
+ *
+ * The @pipe_index argument selects which DRM pipeline to disable. The number
+ * of available pipelines depend on the VSP instance.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index)
+{
+	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
+	struct vsp1_drm_pipeline *drm_pipe;
+	struct vsp1_pipeline *pipe;
+	struct vsp1_brx *brx;
+	unsigned int i;
+	int ret;
+
+	if (pipe_index >= vsp1->info->lif_count)
+		return -EINVAL;
+
+	drm_pipe = &vsp1->drm->pipe[pipe_index];
+	pipe = &drm_pipe->pipe;
+
+	mutex_lock(&vsp1->drm->lock);
+
+	brx = to_brx(&pipe->brx->subdev);
+
+	/*
+	 * NULL configuration means the CRTC is being disabled, stop
+	 * the pipeline and turn the light off.
+	 */
+	ret = vsp1_pipeline_stop(pipe);
+	if (ret == -ETIMEDOUT)
+		dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
+
+	for (i = 0; i < ARRAY_SIZE(pipe->inputs); ++i) {
+		struct vsp1_rwpf *rpf = pipe->inputs[i];
+
+		if (!rpf)
+			continue;
+
+		/*
+		 * Remove the RPF from the pipe and the list of BRx
+		 * inputs.
+		 */
+		WARN_ON(!rpf->entity.pipe);
+		rpf->entity.pipe = NULL;
+		list_del(&rpf->entity.list_pipe);
+		pipe->inputs[i] = NULL;
+
+		brx->inputs[rpf->brx_input].rpf = NULL;
+	}
+
+	drm_pipe->du_complete = NULL;
+	pipe->num_inputs = 0;
+
+	dev_dbg(vsp1->dev, "%s: pipe %u: releasing %s\n",
+		__func__, pipe->lif->index,
+		BRX_NAME(pipe->brx));
+
+	list_del(&pipe->brx->list_pipe);
+	pipe->brx->pipe = NULL;
+	pipe->brx = NULL;
+
+	mutex_unlock(&vsp1->drm->lock);
+
+	vsp1_dlm_reset(pipe->output->dlm);
+	vsp1_device_put(vsp1);
+
+	dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(vsp1_du_atomic_disable);
+
+/**
+ * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
+ * @dev: the VSP device
+ * @pipe_index: the DRM pipeline index
+ * @cfg: the LIF configuration
+ *
+ * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
+ * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
+ * source pads, and the LIF sink pad.
+ *
+ * The @pipe_index argument selects which DRM pipeline to setup. The number of
+ * available pipelines depend on the VSP instance.
+ *
+ * As the media bus code on the blend unit source pad is conditioned by the
+ * configuration of its sink 0 pad, we also set up the formats on all blend unit
+ * sinks, even if the configuration will be overwritten later by
+ * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is set to
+ * a well defined state.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
+		      const struct vsp1_du_lif_config *cfg)
+{
+	int ret;
+
+	struct vsp1_du_modeset_config modes = {
+		.width = cfg->width,
+		.height = cfg->height,
+		.interlaced = cfg->interlaced,
+	};
+	struct vsp1_du_enable_config enable = {
+		.callback = cfg->callback,
+		.callback_data = cfg->callback_data,
+	};
+
+	if (!cfg)
+		return vsp1_du_atomic_disable(dev, pipe_index);
+
+	ret = vsp1_du_atomic_modeset(dev, pipe_index, &modes);
+	if (ret)
+		return ret;
+
+	return vsp1_du_atomic_enable(dev, pipe_index, &enable);
 }
 EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
 
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index cc1b0d42ce95..13f5a1c4d45a 100644
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -21,7 +21,7 @@ int vsp1_du_init(struct device *dev);
 #define VSP1_DU_STATUS_WRITEBACK	BIT(1)
 
 /**
- * struct vsp1_du_lif_config - VSP LIF configuration
+ * struct vsp1_du_lif_config - VSP LIF configuration - Deprecated
  * @width: output frame width
  * @height: output frame height
  * @interlaced: true for interlaced pipelines
@@ -42,6 +42,30 @@ struct vsp1_du_lif_config {
 int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 		      const struct vsp1_du_lif_config *cfg);
 
+/**
+ * struct vsp1_du_modeset_config - VSP LIF Mode configuration
+ * @width: output frame width
+ * @height: output frame height
+ * @interlaced: true for interlaced pipelines
+ */
+struct vsp1_du_modeset_config {
+	unsigned int width;
+	unsigned int height;
+	bool interlaced;
+};
+
+/**
+ * struct vsp1_du_enable_config - VSP enable configuration
+ * @callback: frame completion callback function (optional). When a callback
+ *	      is provided, the VSP driver guarantees that it will be called once
+ *	      and only once for each vsp1_du_atomic_flush() call.
+ * @callback_data: data to be passed to the frame completion callback
+ */
+struct vsp1_du_enable_config {
+	void (*callback)(void *data, unsigned int status, u32 crc);
+	void *callback_data;
+};
+
 /**
  * struct vsp1_du_atomic_config - VSP atomic configuration parameters
  * @pixelformat: plane pixel format (V4L2 4CC)
@@ -106,6 +130,12 @@ struct vsp1_du_atomic_pipe_config {
 	struct vsp1_du_writeback_config writeback;
 };
 
+
+int vsp1_du_atomic_modeset(struct device *dev, unsigned int pipe_index,
+		    const struct vsp1_du_modeset_config *cfg);
+int vsp1_du_atomic_enable(struct device *dev, unsigned int pipe_index,
+		   const struct vsp1_du_enable_config *cfg);
+int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index);
 void vsp1_du_atomic_begin(struct device *dev, unsigned int pipe_index);
 int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
 			  unsigned int rpf,
-- 
2.20.1

Re: [PATCH 1/3] media: vsp1: drm: Split vsp1_du_setup_lif()

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Fri, May 17, 2019 at 11:31:41PM +0100, Kieran Bingham wrote:
> Break vsp1_du_setup_lif() into components more suited to the DRM Atomic
> API. The existing vsp1_du_setup_lif() API call is maintained as it is
> still used from the DU.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
>  drivers/media/platform/vsp1/vsp1_drm.c | 233 ++++++++++++++++++-------
>  include/media/vsp1.h                   |  32 +++-
>  2 files changed, 199 insertions(+), 66 deletions(-)
> 
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> index a4a45d68a6ef..ce5c0780680f 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -616,18 +616,15 @@ int vsp1_du_init(struct device *dev)
>  EXPORT_SYMBOL_GPL(vsp1_du_init);
>  
>  /**
> - * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
> + * vsp1_du_atomic_modeset - Configure the mode as part of an atomic update
>   * @dev: the VSP device
>   * @pipe_index: the DRM pipeline index
> - * @cfg: the LIF configuration
> + * @cfg: the mode configuration
>   *
>   * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
>   * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
>   * source pads, and the LIF sink pad.
>   *
> - * The @pipe_index argument selects which DRM pipeline to setup. The number of
> - * available pipelines depend on the VSP instance.
> - *

Shouldn't this paragraph be preserved, as the function keeps its
pipe_index argument ?

>   * As the media bus code on the blend unit source pad is conditioned by the
>   * configuration of its sink 0 pad, we also set up the formats on all blend unit
>   * sinks, even if the configuration will be overwritten later by
> @@ -635,15 +632,14 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
>   * a well defined state.
>   *
>   * Return 0 on success or a negative error code on failure.
> + *

Not needed.

>   */
> -int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> -		      const struct vsp1_du_lif_config *cfg)
> +int vsp1_du_atomic_modeset(struct device *dev, unsigned int pipe_index,
> +			   const struct vsp1_du_modeset_config *cfg)
>  {
>  	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
>  	struct vsp1_drm_pipeline *drm_pipe;
>  	struct vsp1_pipeline *pipe;
> -	unsigned long flags;
> -	unsigned int i;
>  	int ret;
>  
>  	if (pipe_index >= vsp1->info->lif_count)
> @@ -652,60 +648,6 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
>  	drm_pipe = &vsp1->drm->pipe[pipe_index];
>  	pipe = &drm_pipe->pipe;
>  
> -	if (!cfg) {
> -		struct vsp1_brx *brx;
> -
> -		mutex_lock(&vsp1->drm->lock);
> -
> -		brx = to_brx(&pipe->brx->subdev);
> -
> -		/*
> -		 * NULL configuration means the CRTC is being disabled, stop
> -		 * the pipeline and turn the light off.
> -		 */
> -		ret = vsp1_pipeline_stop(pipe);
> -		if (ret == -ETIMEDOUT)
> -			dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
> -
> -		for (i = 0; i < ARRAY_SIZE(pipe->inputs); ++i) {
> -			struct vsp1_rwpf *rpf = pipe->inputs[i];
> -
> -			if (!rpf)
> -				continue;
> -
> -			/*
> -			 * Remove the RPF from the pipe and the list of BRx
> -			 * inputs.
> -			 */
> -			WARN_ON(!rpf->entity.pipe);
> -			rpf->entity.pipe = NULL;
> -			list_del(&rpf->entity.list_pipe);
> -			pipe->inputs[i] = NULL;
> -
> -			brx->inputs[rpf->brx_input].rpf = NULL;
> -		}
> -
> -		drm_pipe->du_complete = NULL;
> -		pipe->num_inputs = 0;
> -
> -		dev_dbg(vsp1->dev, "%s: pipe %u: releasing %s\n",
> -			__func__, pipe->lif->index,
> -			BRX_NAME(pipe->brx));
> -
> -		list_del(&pipe->brx->list_pipe);
> -		pipe->brx->pipe = NULL;
> -		pipe->brx = NULL;
> -
> -		mutex_unlock(&vsp1->drm->lock);
> -
> -		vsp1_dlm_reset(pipe->output->dlm);
> -		vsp1_device_put(vsp1);
> -
> -		dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
> -
> -		return 0;
> -	}
> -
>  	drm_pipe->width = cfg->width;
>  	drm_pipe->height = cfg->height;
>  	pipe->interlaced = cfg->interlaced;
> @@ -722,8 +664,43 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
>  		goto unlock;
>  
>  	ret = vsp1_du_pipeline_setup_output(vsp1, pipe);
> -	if (ret < 0)
> -		goto unlock;
> +
> +unlock:
> +	mutex_unlock(&vsp1->drm->lock);
> +
> +	return ret;
> +}
> +
> +/**
> + * vsp1_du_atomic_enable - Enable and start a DU pipeline
> + * @dev: the VSP device
> + * @pipe_index: the DRM pipeline index
> + * @cfg: the enablement configuration

Not a big fan of this description or of the vsp1_du_enable_config name,
but I can't really think of a better alternative. vsp1_du_callback would
be an option, but it would prevent us from adding new fields not related
to the callback.

> + *
> + * The @pipe_index argument selects which DRM pipeline to enable. The number of
> + * available pipelines depend on the VSP instance.
> + *
> + * The configuration passes a callback function to register notification of
> + * frame completion events.
> + *
> + * Return 0 on success or a negative error code on failure.
> + */
> +int vsp1_du_atomic_enable(struct device *dev, unsigned int pipe_index,
> +			  const struct vsp1_du_enable_config *cfg)
> +{
> +	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
> +	struct vsp1_drm_pipeline *drm_pipe;
> +	struct vsp1_pipeline *pipe;
> +	unsigned long flags;
> +	int ret;
> +
> +	if (pipe_index >= vsp1->info->lif_count)
> +		return -EINVAL;
> +
> +	drm_pipe = &vsp1->drm->pipe[pipe_index];
> +	pipe = &drm_pipe->pipe;
> +
> +	mutex_lock(&vsp1->drm->lock);
>  
>  	/* Enable the VSP1. */
>  	ret = vsp1_device_get(vsp1);
> @@ -758,6 +735,132 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
>  	dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__);
>  
>  	return 0;
> +
> +}
> +EXPORT_SYMBOL_GPL(vsp1_du_atomic_enable);
> +
> +

Extra blank line.

> +/**
> + * vsp1_du_atomic_disable - Disable and stop a DU pipeline
> + * @dev: the VSP device
> + * @pipe_index: the DRM pipeline index
> + *
> + * The @pipe_index argument selects which DRM pipeline to disable. The number
> + * of available pipelines depend on the VSP instance.
> + *
> + * Return 0 on success or a negative error code on failure.
> + */
> +int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index)
> +{
> +	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
> +	struct vsp1_drm_pipeline *drm_pipe;
> +	struct vsp1_pipeline *pipe;
> +	struct vsp1_brx *brx;
> +	unsigned int i;
> +	int ret;
> +
> +	if (pipe_index >= vsp1->info->lif_count)
> +		return -EINVAL;
> +
> +	drm_pipe = &vsp1->drm->pipe[pipe_index];
> +	pipe = &drm_pipe->pipe;
> +
> +	mutex_lock(&vsp1->drm->lock);
> +
> +	brx = to_brx(&pipe->brx->subdev);
> +
> +	/*
> +	 * NULL configuration means the CRTC is being disabled, stop
> +	 * the pipeline and turn the light off.
> +	 */

I think you can now drop this comment, or at least the first part of the
sentence.

> +	ret = vsp1_pipeline_stop(pipe);
> +	if (ret == -ETIMEDOUT)
> +		dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
> +
> +	for (i = 0; i < ARRAY_SIZE(pipe->inputs); ++i) {
> +		struct vsp1_rwpf *rpf = pipe->inputs[i];
> +
> +		if (!rpf)
> +			continue;
> +
> +		/*
> +		 * Remove the RPF from the pipe and the list of BRx
> +		 * inputs.
> +		 */

This now holds on a single line.

> +		WARN_ON(!rpf->entity.pipe);
> +		rpf->entity.pipe = NULL;
> +		list_del(&rpf->entity.list_pipe);
> +		pipe->inputs[i] = NULL;
> +
> +		brx->inputs[rpf->brx_input].rpf = NULL;
> +	}
> +
> +	drm_pipe->du_complete = NULL;
> +	pipe->num_inputs = 0;
> +
> +	dev_dbg(vsp1->dev, "%s: pipe %u: releasing %s\n",
> +		__func__, pipe->lif->index,
> +		BRX_NAME(pipe->brx));

And this can hold on two lines.

> +
> +	list_del(&pipe->brx->list_pipe);
> +	pipe->brx->pipe = NULL;
> +	pipe->brx = NULL;
> +
> +	mutex_unlock(&vsp1->drm->lock);
> +
> +	vsp1_dlm_reset(pipe->output->dlm);
> +	vsp1_device_put(vsp1);
> +
> +	dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(vsp1_du_atomic_disable);
> +
> +/**
> + * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
> + * @dev: the VSP device
> + * @pipe_index: the DRM pipeline index
> + * @cfg: the LIF configuration
> + *
> + * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
> + * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
> + * source pads, and the LIF sink pad.
> + *
> + * The @pipe_index argument selects which DRM pipeline to setup. The number of
> + * available pipelines depend on the VSP instance.
> + *
> + * As the media bus code on the blend unit source pad is conditioned by the
> + * configuration of its sink 0 pad, we also set up the formats on all blend unit
> + * sinks, even if the configuration will be overwritten later by
> + * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is set to
> + * a well defined state.
> + *
> + * Return 0 on success or a negative error code on failure.
> + */
> +int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> +		      const struct vsp1_du_lif_config *cfg)
> +{
> +	int ret;
> +
> +	struct vsp1_du_modeset_config modes = {
> +		.width = cfg->width,
> +		.height = cfg->height,
> +		.interlaced = cfg->interlaced,
> +	};
> +	struct vsp1_du_enable_config enable = {
> +		.callback = cfg->callback,
> +		.callback_data = cfg->callback_data,
> +	};
> +
> +	if (!cfg)
> +		return vsp1_du_atomic_disable(dev, pipe_index);
> +
> +	ret = vsp1_du_atomic_modeset(dev, pipe_index, &modes);
> +	if (ret)
> +		return ret;
> +
> +	return vsp1_du_atomic_enable(dev, pipe_index, &enable);
>  }
>  EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
>  
> diff --git a/include/media/vsp1.h b/include/media/vsp1.h
> index cc1b0d42ce95..13f5a1c4d45a 100644
> --- a/include/media/vsp1.h
> +++ b/include/media/vsp1.h
> @@ -21,7 +21,7 @@ int vsp1_du_init(struct device *dev);
>  #define VSP1_DU_STATUS_WRITEBACK	BIT(1)
>  
>  /**
> - * struct vsp1_du_lif_config - VSP LIF configuration
> + * struct vsp1_du_lif_config - VSP LIF configuration - Deprecated
>   * @width: output frame width
>   * @height: output frame height
>   * @interlaced: true for interlaced pipelines
> @@ -42,6 +42,30 @@ struct vsp1_du_lif_config {
>  int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
>  		      const struct vsp1_du_lif_config *cfg);
>  
> +/**
> + * struct vsp1_du_modeset_config - VSP LIF Mode configuration

Maybe "VSP display mode configuration" as it's not restricted to the LIF
?

> + * @width: output frame width
> + * @height: output frame height
> + * @interlaced: true for interlaced pipelines
> + */
> +struct vsp1_du_modeset_config {
> +	unsigned int width;
> +	unsigned int height;
> +	bool interlaced;
> +};
> +
> +/**
> + * struct vsp1_du_enable_config - VSP enable configuration
> + * @callback: frame completion callback function (optional). When a callback
> + *	      is provided, the VSP driver guarantees that it will be called once
> + *	      and only once for each vsp1_du_atomic_flush() call.
> + * @callback_data: data to be passed to the frame completion callback
> + */
> +struct vsp1_du_enable_config {
> +	void (*callback)(void *data, unsigned int status, u32 crc);
> +	void *callback_data;
> +};
> +
>  /**
>   * struct vsp1_du_atomic_config - VSP atomic configuration parameters
>   * @pixelformat: plane pixel format (V4L2 4CC)
> @@ -106,6 +130,12 @@ struct vsp1_du_atomic_pipe_config {
>  	struct vsp1_du_writeback_config writeback;
>  };
>  
> +
> +int vsp1_du_atomic_modeset(struct device *dev, unsigned int pipe_index,
> +		    const struct vsp1_du_modeset_config *cfg);
> +int vsp1_du_atomic_enable(struct device *dev, unsigned int pipe_index,
> +		   const struct vsp1_du_enable_config *cfg);
> +int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index);
>  void vsp1_du_atomic_begin(struct device *dev, unsigned int pipe_index);
>  int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
>  			  unsigned int rpf,

-- 
Regards,

Laurent Pinchart

[PATCH 2/3] drm: rcar-du: Convert to the new VSP atomic API

[Kieran Bingham]

The configuration API between the VSP and the DU has been updated to
provide finer grain control over modesetting, and enablement.

Split rcar_du_vsp_enable() into rcar_du_vsp_modeset() and
rcar_du_vsp_enable() accordingly, and update each function to use the
new VSP API.

There are no further users of the deprecated vsp1_du_setup_lif() which
can now be removed.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c |  4 +++-
 drivers/gpu/drm/rcar-du/rcar_du_vsp.c  | 21 +++++++++++++++------
 drivers/gpu/drm/rcar-du/rcar_du_vsp.h  |  2 ++
 3 files changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 2da46e3dc4ae..cccd6fe85749 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -492,8 +492,10 @@ static void rcar_du_crtc_setup(struct rcar_du_crtc *rcrtc)
 	rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
 
 	/* Enable the VSP compositor. */
-	if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
+	if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) {
+		rcar_du_vsp_modeset(rcrtc);
 		rcar_du_vsp_enable(rcrtc);
+	}
 
 	/* Turn vertical blanking interrupt reporting on. */
 	drm_crtc_vblank_on(&rcrtc->crtc);
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
index 5e4faf258c31..c170427fcad9 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
@@ -44,16 +44,14 @@ static void rcar_du_vsp_complete(void *private, unsigned int status, u32 crc)
 	drm_crtc_add_crc_entry(&crtc->crtc, false, 0, &crc);
 }
 
-void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
+void rcar_du_vsp_modeset(struct rcar_du_crtc *crtc)
 {
 	const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
 	struct rcar_du_device *rcdu = crtc->dev;
-	struct vsp1_du_lif_config cfg = {
+	struct vsp1_du_modeset_config cfg = {
 		.width = mode->hdisplay,
 		.height = mode->vdisplay,
 		.interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE,
-		.callback = rcar_du_vsp_complete,
-		.callback_data = crtc,
 	};
 	struct rcar_du_plane_state state = {
 		.state = {
@@ -90,12 +88,23 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
 	 */
 	crtc->group->need_restart = true;
 
-	vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+
+	vsp1_du_atomic_modeset(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
+{
+	struct vsp1_du_enable_config cfg = {
+		.callback = rcar_du_vsp_complete,
+		.callback_data = crtc,
+	};
+
+	vsp1_du_atomic_enable(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
 }
 
 void rcar_du_vsp_disable(struct rcar_du_crtc *crtc)
 {
-	vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, NULL);
+	vsp1_du_atomic_disable(crtc->vsp->vsp, crtc->vsp_pipe);
 }
 
 void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.h b/drivers/gpu/drm/rcar-du/rcar_du_vsp.h
index 9b4724159378..a6f6bb4690f2 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.h
@@ -58,6 +58,7 @@ to_rcar_vsp_plane_state(struct drm_plane_state *state)
 #ifdef CONFIG_DRM_RCAR_VSP
 int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
 		     unsigned int crtcs);
+void rcar_du_vsp_modeset(struct rcar_du_crtc *crtc);
 void rcar_du_vsp_enable(struct rcar_du_crtc *crtc);
 void rcar_du_vsp_disable(struct rcar_du_crtc *crtc);
 void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc);
@@ -73,6 +74,7 @@ static inline int rcar_du_vsp_init(struct rcar_du_vsp *vsp,
 {
 	return -ENXIO;
 }
+static inlinc void rcar_du_vsp_modeset(struct rcar_du_crtc *crtc) { };
 static inline void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) { };
 static inline void rcar_du_vsp_disable(struct rcar_du_crtc *crtc) { };
 static inline void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc) { };
-- 
2.20.1

Re: [PATCH 2/3] drm: rcar-du: Convert to the new VSP atomic API

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Fri, May 17, 2019 at 11:31:42PM +0100, Kieran Bingham wrote:
> The configuration API between the VSP and the DU has been updated to
> provide finer grain control over modesetting, and enablement.
> 
> Split rcar_du_vsp_enable() into rcar_du_vsp_modeset() and
> rcar_du_vsp_enable() accordingly, and update each function to use the
> new VSP API.
> 
> There are no further users of the deprecated vsp1_du_setup_lif() which
> can now be removed.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c |  4 +++-
>  drivers/gpu/drm/rcar-du/rcar_du_vsp.c  | 21 +++++++++++++++------
>  drivers/gpu/drm/rcar-du/rcar_du_vsp.h  |  2 ++
>  3 files changed, 20 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index 2da46e3dc4ae..cccd6fe85749 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -492,8 +492,10 @@ static void rcar_du_crtc_setup(struct rcar_du_crtc *rcrtc)
>  	rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0);
>  
>  	/* Enable the VSP compositor. */
> -	if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
> +	if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE)) {
> +		rcar_du_vsp_modeset(rcrtc);
>  		rcar_du_vsp_enable(rcrtc);
> +	}
>  
>  	/* Turn vertical blanking interrupt reporting on. */
>  	drm_crtc_vblank_on(&rcrtc->crtc);
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> index 5e4faf258c31..c170427fcad9 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
> @@ -44,16 +44,14 @@ static void rcar_du_vsp_complete(void *private, unsigned int status, u32 crc)
>  	drm_crtc_add_crc_entry(&crtc->crtc, false, 0, &crc);
>  }
>  
> -void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
> +void rcar_du_vsp_modeset(struct rcar_du_crtc *crtc)
>  {
>  	const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
>  	struct rcar_du_device *rcdu = crtc->dev;
> -	struct vsp1_du_lif_config cfg = {
> +	struct vsp1_du_modeset_config cfg = {
>  		.width = mode->hdisplay,
>  		.height = mode->vdisplay,
>  		.interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE,
> -		.callback = rcar_du_vsp_complete,
> -		.callback_data = crtc,
>  	};
>  	struct rcar_du_plane_state state = {
>  		.state = {
> @@ -90,12 +88,23 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
>  	 */
>  	crtc->group->need_restart = true;
>  
> -	vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
> +

Extra blank line.

Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +	vsp1_du_atomic_modeset(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
> +}
> +
> +void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
> +{
> +	struct vsp1_du_enable_config cfg = {
> +		.callback = rcar_du_vsp_complete,
> +		.callback_data = crtc,
> +	};
> +
> +	vsp1_du_atomic_enable(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
>  }
>  
>  void rcar_du_vsp_disable(struct rcar_du_crtc *crtc)
>  {
> -	vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, NULL);
> +	vsp1_du_atomic_disable(crtc->vsp->vsp, crtc->vsp_pipe);
>  }
>  
>  void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc)
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.h b/drivers/gpu/drm/rcar-du/rcar_du_vsp.h
> index 9b4724159378..a6f6bb4690f2 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.h
> @@ -58,6 +58,7 @@ to_rcar_vsp_plane_state(struct drm_plane_state *state)
>  #ifdef CONFIG_DRM_RCAR_VSP
>  int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
>  		     unsigned int crtcs);
> +void rcar_du_vsp_modeset(struct rcar_du_crtc *crtc);
>  void rcar_du_vsp_enable(struct rcar_du_crtc *crtc);
>  void rcar_du_vsp_disable(struct rcar_du_crtc *crtc);
>  void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc);
> @@ -73,6 +74,7 @@ static inline int rcar_du_vsp_init(struct rcar_du_vsp *vsp,
>  {
>  	return -ENXIO;
>  }
> +static inlinc void rcar_du_vsp_modeset(struct rcar_du_crtc *crtc) { };
>  static inline void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) { };
>  static inline void rcar_du_vsp_disable(struct rcar_du_crtc *crtc) { };
>  static inline void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc) { };

-- 
Regards,

Laurent Pinchart

[PATCH 3/3] media: vsp1: drm: Remove vsp1_du_setup_lif()

[Kieran Bingham]

The vsp1_du_setup_lif() function is deprecated, and the users have been
removed. Remove the implementation and the associated configuration
structure.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
 drivers/media/platform/vsp1/vsp1_drm.c | 47 --------------------------
 include/media/vsp1.h                   | 22 ------------
 2 files changed, 69 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index ce5c0780680f..12f76344bdec 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -817,53 +817,6 @@ int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index)
 }
 EXPORT_SYMBOL_GPL(vsp1_du_atomic_disable);
 
-/**
- * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
- * @dev: the VSP device
- * @pipe_index: the DRM pipeline index
- * @cfg: the LIF configuration
- *
- * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
- * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
- * source pads, and the LIF sink pad.
- *
- * The @pipe_index argument selects which DRM pipeline to setup. The number of
- * available pipelines depend on the VSP instance.
- *
- * As the media bus code on the blend unit source pad is conditioned by the
- * configuration of its sink 0 pad, we also set up the formats on all blend unit
- * sinks, even if the configuration will be overwritten later by
- * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is set to
- * a well defined state.
- *
- * Return 0 on success or a negative error code on failure.
- */
-int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
-		      const struct vsp1_du_lif_config *cfg)
-{
-	int ret;
-
-	struct vsp1_du_modeset_config modes = {
-		.width = cfg->width,
-		.height = cfg->height,
-		.interlaced = cfg->interlaced,
-	};
-	struct vsp1_du_enable_config enable = {
-		.callback = cfg->callback,
-		.callback_data = cfg->callback_data,
-	};
-
-	if (!cfg)
-		return vsp1_du_atomic_disable(dev, pipe_index);
-
-	ret = vsp1_du_atomic_modeset(dev, pipe_index, &modes);
-	if (ret)
-		return ret;
-
-	return vsp1_du_atomic_enable(dev, pipe_index, &enable);
-}
-EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
-
 /**
  * vsp1_du_atomic_begin - Prepare for an atomic update
  * @dev: the VSP device
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index 13f5a1c4d45a..bc0a26d33d9a 100644
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -20,28 +20,6 @@ int vsp1_du_init(struct device *dev);
 #define VSP1_DU_STATUS_COMPLETE		BIT(0)
 #define VSP1_DU_STATUS_WRITEBACK	BIT(1)
 
-/**
- * struct vsp1_du_lif_config - VSP LIF configuration - Deprecated
- * @width: output frame width
- * @height: output frame height
- * @interlaced: true for interlaced pipelines
- * @callback: frame completion callback function (optional). When a callback
- *	      is provided, the VSP driver guarantees that it will be called once
- *	      and only once for each vsp1_du_atomic_flush() call.
- * @callback_data: data to be passed to the frame completion callback
- */
-struct vsp1_du_lif_config {
-	unsigned int width;
-	unsigned int height;
-	bool interlaced;
-
-	void (*callback)(void *data, unsigned int status, u32 crc);
-	void *callback_data;
-};
-
-int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
-		      const struct vsp1_du_lif_config *cfg);
-
 /**
  * struct vsp1_du_modeset_config - VSP LIF Mode configuration
  * @width: output frame width
-- 
2.20.1

Re: [PATCH 3/3] media: vsp1: drm: Remove vsp1_du_setup_lif()

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Fri, May 17, 2019 at 11:31:43PM +0100, Kieran Bingham wrote:
> The vsp1_du_setup_lif() function is deprecated, and the users have been
> removed. Remove the implementation and the associated configuration
> structure.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/platform/vsp1/vsp1_drm.c | 47 --------------------------
>  include/media/vsp1.h                   | 22 ------------
>  2 files changed, 69 deletions(-)
> 
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> index ce5c0780680f..12f76344bdec 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -817,53 +817,6 @@ int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index)
>  }
>  EXPORT_SYMBOL_GPL(vsp1_du_atomic_disable);
>  
> -/**
> - * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
> - * @dev: the VSP device
> - * @pipe_index: the DRM pipeline index
> - * @cfg: the LIF configuration
> - *
> - * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
> - * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
> - * source pads, and the LIF sink pad.
> - *
> - * The @pipe_index argument selects which DRM pipeline to setup. The number of
> - * available pipelines depend on the VSP instance.
> - *
> - * As the media bus code on the blend unit source pad is conditioned by the
> - * configuration of its sink 0 pad, we also set up the formats on all blend unit
> - * sinks, even if the configuration will be overwritten later by
> - * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is set to
> - * a well defined state.
> - *
> - * Return 0 on success or a negative error code on failure.
> - */
> -int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> -		      const struct vsp1_du_lif_config *cfg)
> -{
> -	int ret;
> -
> -	struct vsp1_du_modeset_config modes = {
> -		.width = cfg->width,
> -		.height = cfg->height,
> -		.interlaced = cfg->interlaced,
> -	};
> -	struct vsp1_du_enable_config enable = {
> -		.callback = cfg->callback,
> -		.callback_data = cfg->callback_data,
> -	};
> -
> -	if (!cfg)
> -		return vsp1_du_atomic_disable(dev, pipe_index);
> -
> -	ret = vsp1_du_atomic_modeset(dev, pipe_index, &modes);
> -	if (ret)
> -		return ret;
> -
> -	return vsp1_du_atomic_enable(dev, pipe_index, &enable);
> -}
> -EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
> -
>  /**
>   * vsp1_du_atomic_begin - Prepare for an atomic update
>   * @dev: the VSP device
> diff --git a/include/media/vsp1.h b/include/media/vsp1.h
> index 13f5a1c4d45a..bc0a26d33d9a 100644
> --- a/include/media/vsp1.h
> +++ b/include/media/vsp1.h
> @@ -20,28 +20,6 @@ int vsp1_du_init(struct device *dev);
>  #define VSP1_DU_STATUS_COMPLETE		BIT(0)
>  #define VSP1_DU_STATUS_WRITEBACK	BIT(1)
>  
> -/**
> - * struct vsp1_du_lif_config - VSP LIF configuration - Deprecated
> - * @width: output frame width
> - * @height: output frame height
> - * @interlaced: true for interlaced pipelines
> - * @callback: frame completion callback function (optional). When a callback
> - *	      is provided, the VSP driver guarantees that it will be called once
> - *	      and only once for each vsp1_du_atomic_flush() call.
> - * @callback_data: data to be passed to the frame completion callback
> - */
> -struct vsp1_du_lif_config {
> -	unsigned int width;
> -	unsigned int height;
> -	bool interlaced;
> -
> -	void (*callback)(void *data, unsigned int status, u32 crc);
> -	void *callback_data;
> -};
> -
> -int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> -		      const struct vsp1_du_lif_config *cfg);
> -
>  /**
>   * struct vsp1_du_modeset_config - VSP LIF Mode configuration
>   * @width: output frame width

-- 
Regards,

Laurent Pinchart