* [PATCH] arm64: tegra: Add INA3221 channel info for Jetson TX2
@ 2019-06-17 22:16 Nicolin Chen
2019-06-18 10:57 ` Thierry Reding
0 siblings, 1 reply; 2+ messages in thread
From: Nicolin Chen @ 2019-06-17 22:16 UTC (permalink / raw)
To: thierry.reding
Cc: robh+dt, mark.rutland, jonathanh, devicetree, linux-tegra, linux-kernel
There are four INA3221 chips on the Jetson TX2 (p3310 + p2771).
And each INA3221 chip has three input channels to monitor power.
So this patch adds these 12 channels to the DT of Jetson TX2, by
following the DT binding of INA3221 and official documents from
https://developer.nvidia.com/embedded/downloads
tegra186-p3310:
https://developer.nvidia.com/embedded/dlc/jetson-tx2-series-modules-oem-product-design-guide
tegra186-p2771-0000:
http://developer.nvidia.com/embedded/dlc/jetson-tx1-tx2-developer-kit-carrier-board-spec-20180618
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
.../boot/dts/nvidia/tegra186-p2771-0000.dts | 40 +++++++++++++++++++
.../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 40 +++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index ab6648c72ad5..9df4782c90f3 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -14,11 +14,51 @@
power-monitor@42 {
compatible = "ti,ina3221";
reg = <0x42>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "VDD_MUX";
+ shunt-resistor-micro-ohms = <20000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "VDD_5V0_IO_SYS";
+ shunt-resistor-micro-ohms = <5000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "VDD_3V3_SYS";
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
power-monitor@43 {
compatible = "ti,ina3221";
reg = <0x43>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "VDD_3V3_IO_SLP";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "VDD_1V8_IO";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "VDD_M2_IN";
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
exp1: gpio@74 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 4bbee83d9943..5e18acf5cfad 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -67,11 +67,51 @@
power-monitor@40 {
compatible = "ti,ina3221";
reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "VDD_SYS_GPU";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "VDD_SYS_SOC";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "VDD_3V8_WIFI";
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
power-monitor@41 {
compatible = "ti,ina3221";
reg = <0x41>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "VDD_IN";
+ shunt-resistor-micro-ohms = <5000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "VDD_SYS_CPU";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "VDD_5V0_DDR";
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: tegra: Add INA3221 channel info for Jetson TX2
2019-06-17 22:16 [PATCH] arm64: tegra: Add INA3221 channel info for Jetson TX2 Nicolin Chen
@ 2019-06-18 10:57 ` Thierry Reding
0 siblings, 0 replies; 2+ messages in thread
From: Thierry Reding @ 2019-06-18 10:57 UTC (permalink / raw)
To: Nicolin Chen
Cc: robh+dt, mark.rutland, jonathanh, devicetree, linux-tegra, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 922 bytes --]
On Mon, Jun 17, 2019 at 03:16:59PM -0700, Nicolin Chen wrote:
> There are four INA3221 chips on the Jetson TX2 (p3310 + p2771).
> And each INA3221 chip has three input channels to monitor power.
>
> So this patch adds these 12 channels to the DT of Jetson TX2, by
> following the DT binding of INA3221 and official documents from
> https://developer.nvidia.com/embedded/downloads
>
> tegra186-p3310:
> https://developer.nvidia.com/embedded/dlc/jetson-tx2-series-modules-oem-product-design-guide
>
> tegra186-p2771-0000:
> http://developer.nvidia.com/embedded/dlc/jetson-tx1-tx2-developer-kit-carrier-board-spec-20180618
>
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> ---
> .../boot/dts/nvidia/tegra186-p2771-0000.dts | 40 +++++++++++++++++++
> .../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 40 +++++++++++++++++++
> 2 files changed, 80 insertions(+)
Applied, thanks.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-18 10:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-17 22:16 [PATCH] arm64: tegra: Add INA3221 channel info for Jetson TX2 Nicolin Chen
2019-06-18 10:57 ` Thierry Reding
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).