* [PATCH v14 01/13] dt-bindings: ingenic: Add DT bindings for TCU clocks
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
@ 2019-07-01 15:13 ` Paul Cercueil
2019-07-01 15:13 ` [PATCH v14 02/13] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
` (11 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:13 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek, Rob Herring
This header provides clock numbers for the ingenic,tcu
DT binding.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
---
Notes:
v2: Use SPDX identifier for the license
v3/v4: No change
v5: s/JZ47*_/TCU_/ and dropped *_CLK_LAST defines
v6-v14: No change
include/dt-bindings/clock/ingenic,tcu.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 include/dt-bindings/clock/ingenic,tcu.h
diff --git a/include/dt-bindings/clock/ingenic,tcu.h b/include/dt-bindings/clock/ingenic,tcu.h
new file mode 100644
index 000000000000..d569650a7945
--- /dev/null
+++ b/include/dt-bindings/clock/ingenic,tcu.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,tcu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+
+#define TCU_CLK_TIMER0 0
+#define TCU_CLK_TIMER1 1
+#define TCU_CLK_TIMER2 2
+#define TCU_CLK_TIMER3 3
+#define TCU_CLK_TIMER4 4
+#define TCU_CLK_TIMER5 5
+#define TCU_CLK_TIMER6 6
+#define TCU_CLK_TIMER7 7
+#define TCU_CLK_WDT 8
+#define TCU_CLK_OST 9
+
+#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 02/13] doc: Add doc for the Ingenic TCU hardware
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
2019-07-01 15:13 ` [PATCH v14 01/13] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
@ 2019-07-01 15:13 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 03/13] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
` (10 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:13 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
Add documentation about the Timer/Counter Unit (TCU) present in the
Ingenic JZ47xx SoCs.
The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
hardware block. It features up to to eight channels, that can be used as
counters, timers, or PWM.
- JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all
have eight channels.
- JZ4725B introduced a separate channel, called Operating System Timer
(OST). It is a 32-bit programmable timer. On JZ4770 and above, it is
64-bit.
- Each one of the TCU channels has its own clock, which can be reparented
to three different clocks (pclk, ext, rtc), gated, and reclocked, through
their TCSR register.
* The watchdog and OST hardware blocks also feature a TCSR register with
the same format in their register space.
* The TCU registers used to gate/ungate can also gate/ungate the watchdog
and OST clocks.
- Each TCU channel works in one of two modes:
* mode TCU1: channels cannot work in sleep mode, but are easier to
operate.
* mode TCU2: channels can work in sleep mode, but the operation is a bit
more complicated than with TCU1 channels.
- The mode of each TCU channel depends on the SoC used:
* On the oldest SoCs (up to JZ4740), all of the eight channels operate in
TCU1 mode.
* On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1.
* On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the
others operate as TCU1.
- Each channel can generate an interrupt. Some channels share an interrupt
line, some don't, and this changes between SoC versions:
* on older SoCs (JZ4740 and below), channel 0 and channel 1 have their
own interrupt line; channels 2-7 share the last interrupt line.
* On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one
interrupt line; the OST uses the last interrupt line.
* on newer SoCs (JZ4750 and above), channel 5 has its own interrupt;
channels 0-4 and (if eight channels) 6-7 all share one interrupt line;
the OST uses the last interrupt line.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
Notes:
v4: New patch in this series
v5: Added information about number of channels, and improved
documentation about channel modes
v6: Add info about OST (can be 32-bit on older SoCs)
v7-v11: No change
v12: Add details about new implementation
v13: No change
v14: Convert to ReStructured Text
Documentation/index.rst | 1 +
Documentation/mips/index.rst | 11 +++++
Documentation/mips/ingenic-tcu.rst | 72 ++++++++++++++++++++++++++++++
3 files changed, 84 insertions(+)
create mode 100644 Documentation/mips/index.rst
create mode 100644 Documentation/mips/ingenic-tcu.rst
diff --git a/Documentation/index.rst b/Documentation/index.rst
index a7566ef62411..00481ac8d75f 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -115,6 +115,7 @@ implementation.
x86/index
sh/index
x86/index
+ mips/index
Filesystem Documentation
------------------------
diff --git a/Documentation/mips/index.rst b/Documentation/mips/index.rst
new file mode 100644
index 000000000000..321b4794f3b8
--- /dev/null
+++ b/Documentation/mips/index.rst
@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+MIPS-specific Documentation
+===========================
+
+.. toctree::
+ :maxdepth: 1
+ :numbered:
+
+ ingenic-tcu
diff --git a/Documentation/mips/ingenic-tcu.rst b/Documentation/mips/ingenic-tcu.rst
new file mode 100644
index 000000000000..651c2ebccf71
--- /dev/null
+++ b/Documentation/mips/ingenic-tcu.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+Ingenic JZ47xx SoCs Timer/Counter Unit hardware
+===============================================
+
+The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
+hardware block. It features up to to eight channels, that can be used as
+counters, timers, or PWM.
+
+- JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all
+ have eight channels.
+
+- JZ4725B introduced a separate channel, called Operating System Timer
+ (OST). It is a 32-bit programmable timer. On JZ4760B and above, it is
+ 64-bit.
+
+- Each one of the TCU channels has its own clock, which can be reparented to three
+ different clocks (pclk, ext, rtc), gated, and reclocked, through their TCSR register.
+
+ - The watchdog and OST hardware blocks also feature a TCSR register with the same
+ format in their register space.
+ - The TCU registers used to gate/ungate can also gate/ungate the watchdog and
+ OST clocks.
+
+- Each TCU channel works in one of two modes:
+
+ - mode TCU1: channels cannot work in sleep mode, but are easier to
+ operate.
+ - mode TCU2: channels can work in sleep mode, but the operation is a bit
+ more complicated than with TCU1 channels.
+
+- The mode of each TCU channel depends on the SoC used:
+
+ - On the oldest SoCs (up to JZ4740), all of the eight channels operate in
+ TCU1 mode.
+ - On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1.
+ - On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the
+ others operate as TCU1.
+
+- Each channel can generate an interrupt. Some channels share an interrupt
+ line, some don't, and this changes between SoC versions:
+
+ - on older SoCs (JZ4740 and below), channel 0 and channel 1 have their
+ own interrupt line; channels 2-7 share the last interrupt line.
+ - On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one
+ interrupt line; the OST uses the last interrupt line.
+ - on newer SoCs (JZ4750 and above), channel 5 has its own interrupt;
+ channels 0-4 and (if eight channels) 6-7 all share one interrupt line;
+ the OST uses the last interrupt line.
+
+Implementation
+==============
+
+The functionalities of the TCU hardware are spread across multiple drivers:
+
+=========== =====
+boilerplate drivers/mfd/ingenic-tcu.c
+clocks drivers/clk/ingenic/tcu.c
+interrupts drivers/irqchip/irq-ingenic-tcu.c
+timers drivers/clocksource/ingenic-timer.c
+OST drivers/clocksource/ingenic-ost.c
+PWM drivers/pwm/pwm-jz4740.c
+watchdog drivers/watchdog/jz4740_wdt.c
+=========== =====
+
+Because various functionalities of the TCU that belong to different drivers
+and frameworks can be controlled from the same registers, all of these
+drivers access their registers through the same regmap.
+
+For more information regarding the devicetree bindings of the TCU drivers,
+have a look at Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 03/13] dt-bindings: Add doc for the Ingenic TCU drivers
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
2019-07-01 15:13 ` [PATCH v14 01/13] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2019-07-01 15:13 ` [PATCH v14 02/13] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 04/13] mfd: Add Ingenic TCU driver Paul Cercueil
` (9 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Rob Herring, Artur Rojek
Add documentation about how to properly use the Ingenic TCU
(Timer/Counter Unit) drivers from devicetree.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
Notes:
v4: New patch in this series. Corresponds to V2 patches 3-4-5 with
added content.
v5:
- Edited PWM/watchdog DT bindings documentation to point to the new
document.
- Moved main document to
Documentation/devicetree/bindings/timer/ingenic,tcu.txt
- Updated documentation to reflect the new devicetree bindings.
v6:
- Removed PWM/watchdog documentation files as asked by upstream
- Removed doc about properties that should be implicit
- Removed doc about ingenic,timer-channel /
ingenic,clocksource-channel as they are gone
- Fix WDT clock name in the binding doc
- Fix lengths of register areas in watchdog/pwm nodes
v7: No change
v8:
- Fix address of the PWM node
- Added doc about system timer and clocksource children nodes
v9:
- Remove doc about system timer and clocksource children
nodes...
- Add doc about ingenic,pwm-channels-mask property
v10: No change
v11: Fix info about default value of ingenic,pwm-channels-mask
v12: Drop sub-nodes for now; they will be introduced in a follow-up
patchset.
v13:
- Revert back to v11. Turns out it was okay.
- Remove 'interrupt-parent' of the list of required properties.
v14: No change
.../bindings/pwm/ingenic,jz47xx-pwm.txt | 25 ----
.../devicetree/bindings/timer/ingenic,tcu.txt | 136 ++++++++++++++++++
.../bindings/watchdog/ingenic,jz4740-wdt.txt | 17 ---
3 files changed, 136 insertions(+), 42 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt
create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
delete mode 100644 Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt
diff --git a/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt b/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt
deleted file mode 100644
index 7d9d3f90641b..000000000000
--- a/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Ingenic JZ47xx PWM Controller
-=============================
-
-Required properties:
-- compatible: One of:
- * "ingenic,jz4740-pwm"
- * "ingenic,jz4770-pwm"
- * "ingenic,jz4780-pwm"
-- #pwm-cells: Should be 3. See pwm.txt in this directory for a description
- of the cells format.
-- clocks : phandle to the external clock.
-- clock-names : Should be "ext".
-
-
-Example:
-
- pwm: pwm@10002000 {
- compatible = "ingenic,jz4740-pwm";
- reg = <0x10002000 0x1000>;
-
- #pwm-cells = <3>;
-
- clocks = <&ext>;
- clock-names = "ext";
- };
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
new file mode 100644
index 000000000000..87962da64561
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
@@ -0,0 +1,136 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
+==========================================================
+
+For a description of the TCU hardware and drivers, have a look at
+Documentation/mips/ingenic-tcu.txt.
+
+Required properties:
+
+- compatible: Must be one of:
+ * ingenic,jz4740-tcu
+ * ingenic,jz4725b-tcu
+ * ingenic,jz4770-tcu
+- reg: Should be the offset/length value corresponding to the TCU registers
+- clocks: List of phandle & clock specifiers for clocks external to the TCU.
+ The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
+ should be provided if the SoC has it.
+- clock-names: List of name strings for the external clocks.
+- #clock-cells: Should be <1>;
+ Clock consumers specify this argument to identify a clock. The valid values
+ may be found in <dt-bindings/clock/ingenic,tcu.h>.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value should be 1.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Optional properties:
+
+- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
+ Default value is 0xfc.
+
+
+Children nodes
+==========================================================
+
+
+PWM node:
+---------
+
+Required properties:
+
+- compatible: Must be one of:
+ * ingenic,jz4740-pwm
+ * ingenic,jz4725b-pwm
+- #pwm-cells: Should be 3. See ../pwm/pwm.txt for a description of the cell
+ format.
+- clocks: List of phandle & clock specifiers for the TCU clocks.
+- clock-names: List of name strings for the TCU clocks.
+
+
+Watchdog node:
+--------------
+
+Required properties:
+
+- compatible: Must be "ingenic,jz4740-watchdog"
+- clocks: phandle to the WDT clock
+- clock-names: should be "wdt"
+
+
+OS Timer node:
+---------
+
+Required properties:
+
+- compatible: Must be one of:
+ * ingenic,jz4725b-ost
+ * ingenic,jz4770-ost
+- clocks: phandle to the OST clock
+- clock-names: should be "ost"
+- interrupts : Specifies the interrupt the OST is connected to.
+
+
+Example
+==========================================================
+
+#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC
+ &cgu JZ4770_CLK_EXT
+ &cgu JZ4770_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0
+ &tcu TCU_CLK_TIMER1
+ &tcu TCU_CLK_TIMER2
+ &tcu TCU_CLK_TIMER3
+ &tcu TCU_CLK_TIMER4
+ &tcu TCU_CLK_TIMER5
+ &tcu TCU_CLK_TIMER6
+ &tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt
deleted file mode 100644
index ce1cb72d5345..000000000000
--- a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Ingenic Watchdog Timer (WDT) Controller for JZ4740 & JZ4780
-
-Required properties:
-compatible: "ingenic,jz4740-watchdog" or "ingenic,jz4780-watchdog"
-reg: Register address and length for watchdog registers
-clocks: phandle to the RTC clock
-clock-names: should be "rtc"
-
-Example:
-
-watchdog: jz4740-watchdog@10002000 {
- compatible = "ingenic,jz4740-watchdog";
- reg = <0x10002000 0x10>;
-
- clocks = <&cgu JZ4740_CLK_RTC>;
- clock-names = "rtc";
-};
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 04/13] mfd: Add Ingenic TCU driver
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (2 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 03/13] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 05/13] clk: ingenic: Add driver for the TCU clocks Paul Cercueil
` (8 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
This driver will provide a regmap that can be retrieved very early in
the boot process through the API function ingenic_tcu_get_regmap().
Additionally, it will call devm_of_platform_populate() so that all the
children devices will be probed.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Paul Burton <paul.burton@mips.com>
---
Notes:
v12: New patch
v13: No change
v14:
- Use ERR_CAST() instead of ERR_PTR(PTR_ERR())
- Remove ingenic_tcu_can_use_pwm(); it belongs in the PWM driver.
drivers/mfd/Kconfig | 8 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/ingenic-tcu.c | 87 +++++++++++++++++++++++++++++++++
include/linux/mfd/ingenic-tcu.h | 6 +++
4 files changed, 102 insertions(+)
create mode 100644 drivers/mfd/ingenic-tcu.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a17d275bf1d4..f3ed22613cbc 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -495,6 +495,14 @@ config HTC_I2CPLD
This device provides input and output GPIOs through an I2C
interface to one or more sub-chips.
+config INGENIC_TCU
+ bool "Ingenic Timer/Counter Unit (TCU) support"
+ depends on MIPS || COMPILE_TEST
+ select REGMAP_MMIO
+ help
+ Say yes here to support the Timer/Counter Unit (TCU) IP present
+ in the JZ47xx SoCs from Ingenic.
+
config MFD_INTEL_QUARK_I2C_GPIO
tristate "Intel Quark MFD I2C GPIO"
depends on PCI
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 52b1a90ff515..fb89e131ae98 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -180,6 +180,7 @@ obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o
+obj-$(CONFIG_INGENIC_TCU) += ingenic-tcu.o
obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
obj-$(CONFIG_LPC_ICH) += lpc_ich.o
diff --git a/drivers/mfd/ingenic-tcu.c b/drivers/mfd/ingenic-tcu.c
new file mode 100644
index 000000000000..2d12bebd5430
--- /dev/null
+++ b/drivers/mfd/ingenic-tcu.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU MFD driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct regmap *tcu_regmap __initdata;
+
+static const struct regmap_config ingenic_tcu_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = TCU_REG_OST_CNTHBUF,
+};
+
+static const struct of_device_id ingenic_tcu_of_match[] = {
+ { .compatible = "ingenic,jz4740-tcu" },
+ { .compatible = "ingenic,jz4725b-tcu" },
+ { .compatible = "ingenic,jz4770-tcu" },
+ { /* sentinel */ }
+};
+
+static struct regmap * __init ingenic_tcu_create_regmap(struct device_node *np)
+{
+ struct resource res;
+ void __iomem *base;
+ struct regmap *map;
+
+ if (!of_match_node(ingenic_tcu_of_match, np))
+ return ERR_PTR(-EINVAL);
+
+ base = of_io_request_and_map(np, 0, "TCU");
+ if (IS_ERR(base))
+ return ERR_CAST(base);
+
+ map = regmap_init_mmio(NULL, base, &ingenic_tcu_regmap_config);
+ if (IS_ERR(map))
+ goto err_iounmap;
+
+ return map;
+
+err_iounmap:
+ iounmap(base);
+ of_address_to_resource(np, 0, &res);
+ release_mem_region(res.start, resource_size(&res));
+
+ return map;
+}
+
+static int __init ingenic_tcu_probe(struct platform_device *pdev)
+{
+ struct regmap *map = ingenic_tcu_get_regmap(pdev->dev.of_node);
+
+ platform_set_drvdata(pdev, map);
+
+ regmap_attach_dev(&pdev->dev, map, &ingenic_tcu_regmap_config);
+
+ return devm_of_platform_populate(&pdev->dev);
+}
+
+static struct platform_driver ingenic_tcu_driver = {
+ .driver = {
+ .name = "ingenic-tcu",
+ .of_match_table = ingenic_tcu_of_match,
+ },
+};
+
+static int __init ingenic_tcu_platform_init(void)
+{
+ return platform_driver_probe(&ingenic_tcu_driver,
+ ingenic_tcu_probe);
+}
+subsys_initcall(ingenic_tcu_platform_init);
+
+struct regmap * __init ingenic_tcu_get_regmap(struct device_node *np)
+{
+ if (!tcu_regmap)
+ tcu_regmap = ingenic_tcu_create_regmap(np);
+
+ return tcu_regmap;
+}
diff --git a/include/linux/mfd/ingenic-tcu.h b/include/linux/mfd/ingenic-tcu.h
index 2083fa20821d..045fb90c57fd 100644
--- a/include/linux/mfd/ingenic-tcu.h
+++ b/include/linux/mfd/ingenic-tcu.h
@@ -6,6 +6,10 @@
#define __LINUX_MFD_INGENIC_TCU_H_
#include <linux/bitops.h>
+#include <linux/init.h>
+
+struct device_node;
+struct regmap;
#define TCU_REG_WDT_TDR 0x00
#define TCU_REG_WDT_TCER 0x04
@@ -53,4 +57,6 @@
#define TCU_REG_TCNTc(c) (TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE))
#define TCU_REG_TCSRc(c) (TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE))
+struct regmap * __init ingenic_tcu_get_regmap(struct device_node *np);
+
#endif /* __LINUX_MFD_INGENIC_TCU_H_ */
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 05/13] clk: ingenic: Add driver for the TCU clocks
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (3 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 04/13] mfd: Add Ingenic TCU driver Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 06/13] irqchip: Add irq-ingenic-tcu driver Paul Cercueil
` (7 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
Add driver to support the clocks provided by the Timer/Counter Unit
(TCU) of the JZ47xx SoCs from Ingenic.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
Notes:
v12: New patch
v13:
- Don't enable/disable the TCU clock on demand. Enable it in the probe
and call it a day.
- Register suspend callbacks to gate/ungate the TCU clock on
suspend/resume.
- Use pr_fmt and pr_crit instead of custom TCU_ERR() macro
- Remove useless dependency on COMMON_CLK in Kconfig
- Remove registration of clkdev
v14: Change %i to %d
drivers/clk/ingenic/Kconfig | 10 +-
drivers/clk/ingenic/Makefile | 1 +
drivers/clk/ingenic/tcu.c | 473 +++++++++++++++++++++++++++++++++++
3 files changed, 483 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/ingenic/tcu.c
diff --git a/drivers/clk/ingenic/Kconfig b/drivers/clk/ingenic/Kconfig
index fe8db93cf21a..0f39c038670f 100644
--- a/drivers/clk/ingenic/Kconfig
+++ b/drivers/clk/ingenic/Kconfig
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-menu "Ingenic JZ47xx CGU drivers"
+menu "Ingenic JZ47xx drivers"
depends on MIPS
config INGENIC_CGU_COMMON
@@ -45,4 +45,12 @@ config INGENIC_CGU_JZ4780
If building for a JZ4780 SoC, you want to say Y here.
+config INGENIC_TCU_CLK
+ bool "Ingenic JZ47xx TCU clocks driver"
+ default MACH_INGENIC
+ select INGENIC_TCU
+ help
+ Support the clocks of the Timer/Counter Unit (TCU) of the Ingenic
+ JZ47xx SoCs.
+
endmenu
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index ab58a6a862a5..d25a5801bd8a 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_INGENIC_CGU_JZ4740) += jz4740-cgu.o
obj-$(CONFIG_INGENIC_CGU_JZ4725B) += jz4725b-cgu.o
obj-$(CONFIG_INGENIC_CGU_JZ4770) += jz4770-cgu.o
obj-$(CONFIG_INGENIC_CGU_JZ4780) += jz4780-cgu.o
+obj-$(CONFIG_INGENIC_TCU_CLK) += tcu.o
diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
new file mode 100644
index 000000000000..528aa215eb0f
--- /dev/null
+++ b/drivers/clk/ingenic/tcu.c
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU clocks driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clockchips.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/* 8 channels max + watchdog + OST */
+#define TCU_CLK_COUNT 10
+
+#undef pr_fmt
+#define pr_fmt(fmt) "ingenic-tcu-clk: " fmt
+
+enum tcu_clk_parent {
+ TCU_PARENT_PCLK,
+ TCU_PARENT_RTC,
+ TCU_PARENT_EXT,
+};
+
+struct ingenic_soc_info {
+ unsigned int num_channels;
+ bool has_ost;
+ bool has_tcu_clk;
+};
+
+struct ingenic_tcu_clk_info {
+ struct clk_init_data init_data;
+ u8 gate_bit;
+ u8 tcsr_reg;
+};
+
+struct ingenic_tcu_clk {
+ struct clk_hw hw;
+ unsigned int idx;
+ struct ingenic_tcu *tcu;
+ const struct ingenic_tcu_clk_info *info;
+};
+
+struct ingenic_tcu {
+ const struct ingenic_soc_info *soc_info;
+ struct regmap *map;
+ struct clk *clk;
+
+ struct clk_hw_onecell_data *clocks;
+};
+
+static struct ingenic_tcu *ingenic_tcu;
+
+static inline struct ingenic_tcu_clk *to_tcu_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct ingenic_tcu_clk, hw);
+}
+
+static int ingenic_tcu_enable(struct clk_hw *hw)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+ regmap_write(tcu->map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+ return 0;
+}
+
+static void ingenic_tcu_disable(struct clk_hw *hw)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+ regmap_write(tcu->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static int ingenic_tcu_is_enabled(struct clk_hw *hw)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ unsigned int value;
+
+ regmap_read(tcu_clk->tcu->map, TCU_REG_TSR, &value);
+
+ return !(value & BIT(info->gate_bit));
+}
+
+static bool ingenic_tcu_enable_regs(struct clk_hw *hw)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ struct ingenic_tcu *tcu = tcu_clk->tcu;
+ bool enabled = false;
+
+ /*
+ * If the SoC has no global TCU clock, we must ungate the channel's
+ * clock to be able to access its registers.
+ * If we have a TCU clock, it will be enabled automatically as it has
+ * been attached to the regmap.
+ */
+ if (!tcu->clk) {
+ enabled = !!ingenic_tcu_is_enabled(hw);
+ regmap_write(tcu->map, TCU_REG_TSCR, BIT(info->gate_bit));
+ }
+
+ return enabled;
+}
+
+static void ingenic_tcu_disable_regs(struct clk_hw *hw)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+ if (!tcu->clk)
+ regmap_write(tcu->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ unsigned int val = 0;
+ int ret;
+
+ ret = regmap_read(tcu_clk->tcu->map, info->tcsr_reg, &val);
+ WARN_ONCE(ret < 0, "Unable to read TCSR %d", tcu_clk->idx);
+
+ return ffs(val & TCU_TCSR_PARENT_CLOCK_MASK) - 1;
+}
+
+static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ bool was_enabled;
+ int ret;
+
+ was_enabled = ingenic_tcu_enable_regs(hw);
+
+ ret = regmap_update_bits(tcu_clk->tcu->map, info->tcsr_reg,
+ TCU_TCSR_PARENT_CLOCK_MASK, BIT(idx));
+ WARN_ONCE(ret < 0, "Unable to update TCSR %d", tcu_clk->idx);
+
+ if (!was_enabled)
+ ingenic_tcu_disable_regs(hw);
+
+ return 0;
+}
+
+static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ unsigned int prescale;
+ int ret;
+
+ ret = regmap_read(tcu_clk->tcu->map, info->tcsr_reg, &prescale);
+ WARN_ONCE(ret < 0, "Unable to read TCSR %d", tcu_clk->idx);
+
+ prescale = (prescale & TCU_TCSR_PRESCALE_MASK) >> TCU_TCSR_PRESCALE_LSB;
+
+ return parent_rate >> (prescale * 2);
+}
+
+static u8 ingenic_tcu_get_prescale(unsigned long rate, unsigned long req_rate)
+{
+ u8 prescale;
+
+ for (prescale = 0; prescale < 5; prescale++)
+ if ((rate >> (prescale * 2)) <= req_rate)
+ return prescale;
+
+ return 5; /* /1024 divider */
+}
+
+static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long *parent_rate)
+{
+ unsigned long rate = *parent_rate;
+ u8 prescale;
+
+ if (req_rate > rate)
+ return -EINVAL;
+
+ prescale = ingenic_tcu_get_prescale(rate, req_rate);
+
+ return rate >> (prescale * 2);
+}
+
+static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+ const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+ u8 prescale = ingenic_tcu_get_prescale(parent_rate, req_rate);
+ bool was_enabled;
+ int ret;
+
+ was_enabled = ingenic_tcu_enable_regs(hw);
+
+ ret = regmap_update_bits(tcu_clk->tcu->map, info->tcsr_reg,
+ TCU_TCSR_PRESCALE_MASK,
+ prescale << TCU_TCSR_PRESCALE_LSB);
+ WARN_ONCE(ret < 0, "Unable to update TCSR %d", tcu_clk->idx);
+
+ if (!was_enabled)
+ ingenic_tcu_disable_regs(hw);
+
+ return 0;
+}
+
+static const struct clk_ops ingenic_tcu_clk_ops = {
+ .get_parent = ingenic_tcu_get_parent,
+ .set_parent = ingenic_tcu_set_parent,
+
+ .recalc_rate = ingenic_tcu_recalc_rate,
+ .round_rate = ingenic_tcu_round_rate,
+ .set_rate = ingenic_tcu_set_rate,
+
+ .enable = ingenic_tcu_enable,
+ .disable = ingenic_tcu_disable,
+ .is_enabled = ingenic_tcu_is_enabled,
+};
+
+static const char * const ingenic_tcu_timer_parents[] = {
+ [TCU_PARENT_PCLK] = "pclk",
+ [TCU_PARENT_RTC] = "rtc",
+ [TCU_PARENT_EXT] = "ext",
+};
+
+#define DEF_TIMER(_name, _gate_bit, _tcsr) \
+ { \
+ .init_data = { \
+ .name = _name, \
+ .parent_names = ingenic_tcu_timer_parents, \
+ .num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
+ .ops = &ingenic_tcu_clk_ops, \
+ .flags = CLK_SET_RATE_UNGATE, \
+ }, \
+ .gate_bit = _gate_bit, \
+ .tcsr_reg = _tcsr, \
+ }
+static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
+ [TCU_CLK_TIMER0] = DEF_TIMER("timer0", 0, TCU_REG_TCSRc(0)),
+ [TCU_CLK_TIMER1] = DEF_TIMER("timer1", 1, TCU_REG_TCSRc(1)),
+ [TCU_CLK_TIMER2] = DEF_TIMER("timer2", 2, TCU_REG_TCSRc(2)),
+ [TCU_CLK_TIMER3] = DEF_TIMER("timer3", 3, TCU_REG_TCSRc(3)),
+ [TCU_CLK_TIMER4] = DEF_TIMER("timer4", 4, TCU_REG_TCSRc(4)),
+ [TCU_CLK_TIMER5] = DEF_TIMER("timer5", 5, TCU_REG_TCSRc(5)),
+ [TCU_CLK_TIMER6] = DEF_TIMER("timer6", 6, TCU_REG_TCSRc(6)),
+ [TCU_CLK_TIMER7] = DEF_TIMER("timer7", 7, TCU_REG_TCSRc(7)),
+};
+
+static const struct ingenic_tcu_clk_info ingenic_tcu_watchdog_clk_info =
+ DEF_TIMER("wdt", 16, TCU_REG_WDT_TCSR);
+static const struct ingenic_tcu_clk_info ingenic_tcu_ost_clk_info =
+ DEF_TIMER("ost", 15, TCU_REG_OST_TCSR);
+#undef DEF_TIMER
+
+static int __init ingenic_tcu_register_clock(struct ingenic_tcu *tcu,
+ unsigned int idx, enum tcu_clk_parent parent,
+ const struct ingenic_tcu_clk_info *info,
+ struct clk_hw_onecell_data *clocks)
+{
+ struct ingenic_tcu_clk *tcu_clk;
+ int err;
+
+ tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
+ if (!tcu_clk)
+ return -ENOMEM;
+
+ tcu_clk->hw.init = &info->init_data;
+ tcu_clk->idx = idx;
+ tcu_clk->info = info;
+ tcu_clk->tcu = tcu;
+
+ /* Reset channel and clock divider, set default parent */
+ ingenic_tcu_enable_regs(&tcu_clk->hw);
+ regmap_update_bits(tcu->map, info->tcsr_reg, 0xffff, BIT(parent));
+ ingenic_tcu_disable_regs(&tcu_clk->hw);
+
+ err = clk_hw_register(NULL, &tcu_clk->hw);
+ if (err) {
+ kfree(tcu_clk);
+ return err;
+ }
+
+ clocks->hws[idx] = &tcu_clk->hw;
+
+ return 0;
+}
+
+static const struct ingenic_soc_info jz4740_soc_info = {
+ .num_channels = 8,
+ .has_ost = false,
+ .has_tcu_clk = true,
+};
+
+static const struct ingenic_soc_info jz4725b_soc_info = {
+ .num_channels = 6,
+ .has_ost = true,
+ .has_tcu_clk = true,
+};
+
+static const struct ingenic_soc_info jz4770_soc_info = {
+ .num_channels = 8,
+ .has_ost = true,
+ .has_tcu_clk = false,
+};
+
+static const struct of_device_id ingenic_tcu_of_match[] __initconst = {
+ { .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
+ { .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
+ { .compatible = "ingenic,jz4770-tcu", .data = &jz4770_soc_info, },
+ { }
+};
+
+static int __init ingenic_tcu_probe(struct device_node *np)
+{
+ const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
+ struct ingenic_tcu *tcu;
+ struct regmap *map;
+ unsigned int i;
+ int ret;
+
+ map = ingenic_tcu_get_regmap(np);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+ if (!tcu)
+ return -ENOMEM;
+
+ tcu->map = map;
+ tcu->soc_info = id->data;
+
+ if (tcu->soc_info->has_tcu_clk) {
+ tcu->clk = of_clk_get_by_name(np, "tcu");
+ if (IS_ERR(tcu->clk)) {
+ ret = PTR_ERR(tcu->clk);
+ pr_crit("Cannot get TCU clock\n");
+ goto err_free_tcu;
+ }
+
+ ret = clk_prepare_enable(tcu->clk);
+ if (ret) {
+ pr_crit("Unable to enable TCU clock\n");
+ goto err_put_clk;
+ }
+ }
+
+ tcu->clocks = kzalloc(sizeof(*tcu->clocks) +
+ sizeof(*tcu->clocks->hws) * TCU_CLK_COUNT,
+ GFP_KERNEL);
+ if (!tcu->clocks) {
+ ret = -ENOMEM;
+ goto err_clk_disable;
+ }
+
+ tcu->clocks->num = TCU_CLK_COUNT;
+
+ for (i = 0; i < tcu->soc_info->num_channels; i++) {
+ ret = ingenic_tcu_register_clock(tcu, i, TCU_PARENT_EXT,
+ &ingenic_tcu_clk_info[i],
+ tcu->clocks);
+ if (ret) {
+ pr_crit("cannot register clock %d\n", i);
+ goto err_unregister_timer_clocks;
+ }
+ }
+
+ /*
+ * We set EXT as the default parent clock for all the TCU clocks
+ * except for the watchdog one, where we set the RTC clock as the
+ * parent. Since the EXT and PCLK are much faster than the RTC clock,
+ * the watchdog would kick after a maximum time of 5s, and we might
+ * want a slower kicking time.
+ */
+ ret = ingenic_tcu_register_clock(tcu, TCU_CLK_WDT, TCU_PARENT_RTC,
+ &ingenic_tcu_watchdog_clk_info,
+ tcu->clocks);
+ if (ret) {
+ pr_crit("cannot register watchdog clock\n");
+ goto err_unregister_timer_clocks;
+ }
+
+ if (tcu->soc_info->has_ost) {
+ ret = ingenic_tcu_register_clock(tcu, TCU_CLK_OST,
+ TCU_PARENT_EXT,
+ &ingenic_tcu_ost_clk_info,
+ tcu->clocks);
+ if (ret) {
+ pr_crit("cannot register ost clock\n");
+ goto err_unregister_watchdog_clock;
+ }
+ }
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, tcu->clocks);
+ if (ret) {
+ pr_crit("cannot add OF clock provider\n");
+ goto err_unregister_ost_clock;
+ }
+
+ ingenic_tcu = tcu;
+
+ return 0;
+
+err_unregister_ost_clock:
+ if (tcu->soc_info->has_ost)
+ clk_hw_unregister(tcu->clocks->hws[i + 1]);
+err_unregister_watchdog_clock:
+ clk_hw_unregister(tcu->clocks->hws[i]);
+err_unregister_timer_clocks:
+ for (i = 0; i < tcu->clocks->num; i++)
+ if (tcu->clocks->hws[i])
+ clk_hw_unregister(tcu->clocks->hws[i]);
+ kfree(tcu->clocks);
+err_clk_disable:
+ if (tcu->soc_info->has_tcu_clk)
+ clk_disable_unprepare(tcu->clk);
+err_put_clk:
+ if (tcu->soc_info->has_tcu_clk)
+ clk_put(tcu->clk);
+err_free_tcu:
+ kfree(tcu);
+ return ret;
+}
+
+static int __maybe_unused tcu_pm_suspend(void)
+{
+ struct ingenic_tcu *tcu = ingenic_tcu;
+
+ if (tcu->clk)
+ clk_disable(tcu->clk);
+
+ return 0;
+}
+
+static void __maybe_unused tcu_pm_resume(void)
+{
+ struct ingenic_tcu *tcu = ingenic_tcu;
+
+ if (tcu->clk)
+ clk_enable(tcu->clk);
+}
+
+static struct syscore_ops __maybe_unused tcu_pm_ops = {
+ .suspend = tcu_pm_suspend,
+ .resume = tcu_pm_resume,
+};
+
+static void __init ingenic_tcu_init(struct device_node *np)
+{
+ int ret = ingenic_tcu_probe(np);
+
+ if (ret)
+ pr_crit("Failed to initialize TCU clocks: %d\n", ret);
+
+ if (IS_ENABLED(CONFIG_PM_SLEEP))
+ register_syscore_ops(&tcu_pm_ops);
+}
+
+CLK_OF_DECLARE(jz4740_cgu, "ingenic,jz4740-tcu", ingenic_tcu_init);
+CLK_OF_DECLARE(jz4725b_cgu, "ingenic,jz4725b-tcu", ingenic_tcu_init);
+CLK_OF_DECLARE(jz4770_cgu, "ingenic,jz4770-tcu", ingenic_tcu_init);
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 06/13] irqchip: Add irq-ingenic-tcu driver
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (4 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 05/13] clk: ingenic: Add driver for the TCU clocks Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 07/13] clocksource: Add a new timer-ingenic driver Paul Cercueil
` (6 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
This driver handles the interrupt controller built in the Timer/Counter
Unit (TCU) of the JZ47xx SoCs from Ingenic.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
Notes:
v12: New patch
v13: No change
v14: Remove empty lines in structure definitions
drivers/irqchip/Kconfig | 11 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-ingenic-tcu.c | 181 ++++++++++++++++++++++++++++++
3 files changed, 193 insertions(+)
create mode 100644 drivers/irqchip/irq-ingenic-tcu.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 659c5e0fb835..edc67268f777 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -294,6 +294,17 @@ config INGENIC_IRQ
depends on MACH_INGENIC
default y
+config INGENIC_TCU_IRQ
+ bool "Ingenic JZ47xx TCU interrupt controller"
+ default MACH_INGENIC
+ depends on MIPS || COMPILE_TEST
+ select INGENIC_TCU
+ help
+ Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic
+ JZ47xx SoCs.
+
+ If unsure, say N.
+
config RENESAS_H8300H_INTC
bool
select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 606a003a0000..f403b2c221e4 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_RENESAS_H8300H_INTC) += irq-renesas-h8300h.o
obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
+obj-$(CONFIG_INGENIC_TCU_IRQ) += irq-ingenic-tcu.o
obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
obj-$(CONFIG_MSCC_OCELOT_IRQ) += irq-mscc-ocelot.o
diff --git a/drivers/irqchip/irq-ingenic-tcu.c b/drivers/irqchip/irq-ingenic-tcu.c
new file mode 100644
index 000000000000..f43bd39d3a11
--- /dev/null
+++ b/drivers/irqchip/irq-ingenic-tcu.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU IRQ driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+struct ingenic_tcu {
+ struct regmap *map;
+ struct clk *clk;
+ struct irq_domain *domain;
+ unsigned int nb_parent_irqs;
+ u32 parent_irqs[3];
+};
+
+static void ingenic_tcu_intc_cascade(struct irq_desc *desc)
+{
+ struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
+ struct irq_chip_generic *gc = irq_get_domain_generic_chip(domain, 0);
+ struct regmap *map = gc->private;
+ uint32_t irq_reg, irq_mask;
+ unsigned int i;
+
+ regmap_read(map, TCU_REG_TFR, &irq_reg);
+ regmap_read(map, TCU_REG_TMR, &irq_mask);
+
+ chained_irq_enter(irq_chip, desc);
+
+ irq_reg &= ~irq_mask;
+
+ for_each_set_bit(i, (unsigned long *)&irq_reg, 32)
+ generic_handle_irq(irq_linear_revmap(domain, i));
+
+ chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_tcu_gc_unmask_enable_reg(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+ struct regmap *map = gc->private;
+ u32 mask = d->mask;
+
+ irq_gc_lock(gc);
+ regmap_write(map, ct->regs.ack, mask);
+ regmap_write(map, ct->regs.enable, mask);
+ *ct->mask_cache |= mask;
+ irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+ struct regmap *map = gc->private;
+ u32 mask = d->mask;
+
+ irq_gc_lock(gc);
+ regmap_write(map, ct->regs.disable, mask);
+ *ct->mask_cache &= ~mask;
+ irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg_and_ack(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+ struct regmap *map = gc->private;
+ u32 mask = d->mask;
+
+ irq_gc_lock(gc);
+ regmap_write(map, ct->regs.ack, mask);
+ regmap_write(map, ct->regs.disable, mask);
+ irq_gc_unlock(gc);
+}
+
+static int __init ingenic_tcu_irq_init(struct device_node *np,
+ struct device_node *parent)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ struct ingenic_tcu *tcu;
+ struct regmap *map;
+ unsigned int i;
+ int ret, irqs;
+
+ map = ingenic_tcu_get_regmap(np);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+ if (!tcu)
+ return -ENOMEM;
+
+ tcu->map = map;
+
+ irqs = of_property_count_elems_of_size(np, "interrupts", sizeof(u32));
+ if (irqs < 0 || irqs > ARRAY_SIZE(tcu->parent_irqs)) {
+ pr_crit("%s: Invalid 'interrupts' property\n", __func__);
+ ret = -EINVAL;
+ goto err_free_tcu;
+ }
+
+ tcu->nb_parent_irqs = irqs;
+
+ tcu->domain = irq_domain_add_linear(np, 32, &irq_generic_chip_ops,
+ NULL);
+ if (!tcu->domain) {
+ ret = -ENOMEM;
+ goto err_free_tcu;
+ }
+
+ ret = irq_alloc_domain_generic_chips(tcu->domain, 32, 1, "TCU",
+ handle_level_irq, 0,
+ IRQ_NOPROBE | IRQ_LEVEL, 0);
+ if (ret) {
+ pr_crit("%s: Invalid 'interrupts' property\n", __func__);
+ goto out_domain_remove;
+ }
+
+ gc = irq_get_domain_generic_chip(tcu->domain, 0);
+ ct = gc->chip_types;
+
+ gc->wake_enabled = IRQ_MSK(32);
+ gc->private = tcu->map;
+
+ ct->regs.disable = TCU_REG_TMSR;
+ ct->regs.enable = TCU_REG_TMCR;
+ ct->regs.ack = TCU_REG_TFCR;
+ ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
+ ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
+ ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
+ ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
+ /* Mask all IRQs by default */
+ regmap_write(tcu->map, TCU_REG_TMSR, IRQ_MSK(32));
+
+ /*
+ * On JZ4740, timer 0 and timer 1 have their own interrupt line;
+ * timers 2-7 share one interrupt.
+ * On SoCs >= JZ4770, timer 5 has its own interrupt line;
+ * timers 0-4 and 6-7 share one single interrupt.
+ *
+ * To keep things simple, we just register the same handler to
+ * all parent interrupts. The handler will properly detect which
+ * channel fired the interrupt.
+ */
+ for (i = 0; i < irqs; i++) {
+ tcu->parent_irqs[i] = irq_of_parse_and_map(np, i);
+ if (!tcu->parent_irqs[i]) {
+ ret = -EINVAL;
+ goto out_unmap_irqs;
+ }
+
+ irq_set_chained_handler_and_data(tcu->parent_irqs[i],
+ ingenic_tcu_intc_cascade,
+ tcu->domain);
+ }
+
+ return 0;
+
+out_unmap_irqs:
+ for (; i > 0; i--)
+ irq_dispose_mapping(tcu->parent_irqs[i - 1]);
+out_domain_remove:
+ irq_domain_remove(tcu->domain);
+err_free_tcu:
+ kfree(tcu);
+ return ret;
+}
+IRQCHIP_DECLARE(jz4740_tcu_irq, "ingenic,jz4740-tcu", ingenic_tcu_irq_init);
+IRQCHIP_DECLARE(jz4725b_tcu_irq, "ingenic,jz4725b-tcu", ingenic_tcu_irq_init);
+IRQCHIP_DECLARE(jz4770_tcu_irq, "ingenic,jz4770-tcu", ingenic_tcu_irq_init);
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 07/13] clocksource: Add a new timer-ingenic driver
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (5 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 06/13] irqchip: Add irq-ingenic-tcu driver Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 08/13] clk: jz4740: Add TCU clock Paul Cercueil
` (5 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
This driver handles the TCU (Timer Counter Unit) present on the Ingenic
JZ47xx SoCs, and provides the kernel with a system timer, a clocksource
and a sched_clock.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
Notes:
v2: Use SPDX identifier for the license
v3: - Move documentation to its own patch
- Search the devicetree for PWM clients, and use all the TCU
channels that won't be used for PWM
v4: - Add documentation about why we search for PWM clients
- Verify that the PWM clients are for the TCU PWM driver
v5: Major overhaul. Too many changes to list. Consider it's a new
patch.
v6: - Add two API functions ingenic_tcu_request_channel and
ingenic_tcu_release_channel. To be used by the PWM driver to
request the use of a TCU channel. The driver will now dynamically
move away the system timer or clocksource to a new TCU channel.
- The system timer now defaults to channel 0, the clocksource now
defaults to channel 1 and is no more optional. The
ingenic,timer-channel and ingenic,clocksource-channel devicetree
properties are now gone.
- Fix round_rate / set_rate not calculating the prescale divider
the same way. This caused problems when (parent_rate / div) would
give a non-integer result. The behaviour is correct now.
- The clocksource clock is turned off on suspend now.
v7: Fix section mismatch by using builtin_platform_driver_probe()
v8: - Removed ingenic_tcu_[request,release]_channel, and the mechanism
to dynamically change the TCU channel of the system timer or
the clocksource.
- The driver's devicetree node can now have two more children
nodes, that correspond to the system timer and clocksource.
For these two, the driver will use the TCU timer that
correspond to the memory resource supplied in their
respective node.
v9: - Removed support for clocksource / timer children devicetree
nodes. Now, we use a property "ingenic,pwm-channels-mask" to
know which PWM channels are reserved for PWM use and should
not be used as OS timers.
v10: - Use CLK_SET_RATE_UNGATE instead of CLK_SET_RATE_GATE + manually
un-gating the clock before changing rate. Same for re-parenting.
- Unconditionally create the clocksource and sched_clock even if
the SoC possesses a OS Timer. That gives the choice back to the
user which clocksource should be selected.
- Use subsys_initcall() instead of builtin_platform_driver_probe().
The OS Timer driver calls builtin_platform_driver_probe, which
requires the device to be created before that.
- Cosmetic cleanups
v11: - Change prototype of exported function
ingenic_tcu_pwm_can_use_chn(), use a struct device * as first
argument.
- Read clocksource using the regmap instead of bypassing it.
Bypassing the regmap makes sense only for the sched_clock where
the read operation must be as fast as possible.
- Fix incorrect format in pr_crit() macro
v12: - Clock handling and IRQ handling are gone, and are now handled
in their own driver.
- Obtain regmap from the ingenic-tcu MFD driver. As a result, we
cannot bypass the regmap anymore for the sched_clock.
v13: No change
v14: Remove empty lines in structure definitions
drivers/clocksource/Kconfig | 11 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/ingenic-timer.c | 355 ++++++++++++++++++++++++++++
3 files changed, 367 insertions(+)
create mode 100644 drivers/clocksource/ingenic-timer.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 3300739edce4..2d911c15db70 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -673,4 +673,15 @@ config MILBEAUT_TIMER
help
Enables the support for Milbeaut timer driver.
+config INGENIC_TIMER
+ bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
+ default MACH_INGENIC
+ depends on MIPS || COMPILE_TEST
+ depends on COMMON_CLK
+ select INGENIC_TCU
+ select TIMER_OF
+ select IRQ_DOMAIN
+ help
+ Support for the timer/counter unit of the Ingenic JZ SoCs.
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 236858fa7fbf..553f3c61717a 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
obj-$(CONFIG_H8300_TMR8) += h8300_timer8.o
obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o
obj-$(CONFIG_H8300_TPU) += h8300_tpu.o
+obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o
obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o
diff --git a/drivers/clocksource/ingenic-timer.c b/drivers/clocksource/ingenic-timer.c
new file mode 100644
index 000000000000..f3b4d55b46fd
--- /dev/null
+++ b/drivers/clocksource/ingenic-timer.c
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU IRQ driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sched_clock.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+struct ingenic_soc_info {
+ unsigned int num_channels;
+};
+
+struct ingenic_tcu {
+ struct regmap *map;
+ struct clk *timer_clk, *cs_clk;
+ unsigned int timer_channel, cs_channel;
+ struct clock_event_device cevt;
+ struct clocksource cs;
+ char name[4];
+ unsigned long pwm_channels_mask;
+};
+
+static struct ingenic_tcu *ingenic_tcu;
+
+static u64 notrace ingenic_tcu_timer_read(void)
+{
+ struct ingenic_tcu *tcu = ingenic_tcu;
+ unsigned int count;
+
+ regmap_read(tcu->map, TCU_REG_TCNTc(tcu->cs_channel), &count);
+
+ return count;
+}
+
+static u64 notrace ingenic_tcu_timer_cs_read(struct clocksource *cs)
+{
+ return ingenic_tcu_timer_read();
+}
+
+static inline struct ingenic_tcu *to_ingenic_tcu(struct clock_event_device *evt)
+{
+ return container_of(evt, struct ingenic_tcu, cevt);
+}
+
+static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+ struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+
+ regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+
+ return 0;
+}
+
+static int ingenic_tcu_cevt_set_next(unsigned long next,
+ struct clock_event_device *evt)
+{
+ struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+
+ if (next > 0xffff)
+ return -EINVAL;
+
+ regmap_write(tcu->map, TCU_REG_TDFRc(tcu->timer_channel), next);
+ regmap_write(tcu->map, TCU_REG_TCNTc(tcu->timer_channel), 0);
+ regmap_write(tcu->map, TCU_REG_TESR, BIT(tcu->timer_channel));
+
+ return 0;
+}
+
+static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+
+ regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+
+ if (evt->event_handler)
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct clk * __init ingenic_tcu_get_clock(struct device_node *np, int id)
+{
+ struct of_phandle_args args;
+
+ args.np = np;
+ args.args_count = 1;
+ args.args[0] = id;
+
+ return of_clk_get_from_provider(&args);
+}
+
+static int __init ingenic_tcu_timer_init(struct device_node *np,
+ struct ingenic_tcu *tcu)
+{
+ unsigned int timer_virq, channel = tcu->timer_channel;
+ struct irq_domain *domain;
+ unsigned long rate;
+ int err;
+
+ tcu->timer_clk = ingenic_tcu_get_clock(np, channel);
+ if (IS_ERR(tcu->timer_clk))
+ return PTR_ERR(tcu->timer_clk);
+
+ err = clk_prepare_enable(tcu->timer_clk);
+ if (err)
+ goto err_clk_put;
+
+ rate = clk_get_rate(tcu->timer_clk);
+ if (!rate) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ domain = irq_find_host(np);
+ if (!domain) {
+ err = -ENODEV;
+ goto err_clk_disable;
+ }
+
+ timer_virq = irq_create_mapping(domain, channel);
+ if (!timer_virq) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ snprintf(tcu->name, sizeof(tcu->name), "TCU");
+
+ err = request_irq(timer_virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
+ tcu->name, &tcu->cevt);
+ if (err)
+ goto err_irq_dispose_mapping;
+
+ tcu->cevt.cpumask = cpumask_of(smp_processor_id());
+ tcu->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+ tcu->cevt.name = tcu->name;
+ tcu->cevt.rating = 200;
+ tcu->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+ tcu->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+
+ clockevents_config_and_register(&tcu->cevt, rate, 10, 0xffff);
+
+ return 0;
+
+err_irq_dispose_mapping:
+ irq_dispose_mapping(timer_virq);
+err_clk_disable:
+ clk_disable_unprepare(tcu->timer_clk);
+err_clk_put:
+ clk_put(tcu->timer_clk);
+ return err;
+}
+
+static int __init ingenic_tcu_clocksource_init(struct device_node *np,
+ struct ingenic_tcu *tcu)
+{
+ unsigned int channel = tcu->cs_channel;
+ struct clocksource *cs = &tcu->cs;
+ unsigned long rate;
+ int err;
+
+ tcu->cs_clk = ingenic_tcu_get_clock(np, channel);
+ if (IS_ERR(tcu->cs_clk))
+ return PTR_ERR(tcu->cs_clk);
+
+ err = clk_prepare_enable(tcu->cs_clk);
+ if (err)
+ goto err_clk_put;
+
+ rate = clk_get_rate(tcu->cs_clk);
+ if (!rate) {
+ err = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ /* Reset channel */
+ regmap_update_bits(tcu->map, TCU_REG_TCSRc(channel),
+ 0xffff & ~TCU_TCSR_RESERVED_BITS, 0);
+
+ /* Reset counter */
+ regmap_write(tcu->map, TCU_REG_TDFRc(channel), 0xffff);
+ regmap_write(tcu->map, TCU_REG_TCNTc(channel), 0);
+
+ /* Enable channel */
+ regmap_write(tcu->map, TCU_REG_TESR, BIT(channel));
+
+ cs->name = "ingenic-timer";
+ cs->rating = 200;
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ cs->mask = CLOCKSOURCE_MASK(16);
+ cs->read = ingenic_tcu_timer_cs_read;
+
+ err = clocksource_register_hz(cs, rate);
+ if (err)
+ goto err_clk_disable;
+
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(tcu->cs_clk);
+err_clk_put:
+ clk_put(tcu->cs_clk);
+ return err;
+}
+
+static const struct ingenic_soc_info jz4740_soc_info = {
+ .num_channels = 8,
+};
+
+static const struct ingenic_soc_info jz4725b_soc_info = {
+ .num_channels = 6,
+};
+
+static const struct of_device_id ingenic_tcu_of_match[] = {
+ { .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
+ { .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
+ { .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
+ { }
+};
+
+static int __init ingenic_tcu_init(struct device_node *np)
+{
+ const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
+ const struct ingenic_soc_info *soc_info = id->data;
+ struct ingenic_tcu *tcu;
+ struct regmap *map;
+ long rate;
+ int ret;
+
+ of_node_clear_flag(np, OF_POPULATED);
+
+ map = ingenic_tcu_get_regmap(np);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+ if (!tcu)
+ return -ENOMEM;
+
+ /* Enable all TCU channels for PWM use by default except channels 0/1 */
+ tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1, 2);
+ of_property_read_u32(np, "ingenic,pwm-channels-mask",
+ (u32 *)&tcu->pwm_channels_mask);
+
+ /* Verify that we have at least two free channels */
+ if (hweight8(tcu->pwm_channels_mask) > soc_info->num_channels - 2) {
+ pr_crit("%s: Invalid PWM channel mask: 0x%02lx\n", __func__,
+ tcu->pwm_channels_mask);
+ ret = -EINVAL;
+ goto err_free_ingenic_tcu;
+ }
+
+ tcu->map = map;
+ ingenic_tcu = tcu;
+
+ tcu->timer_channel = find_first_zero_bit(&tcu->pwm_channels_mask,
+ soc_info->num_channels);
+ tcu->cs_channel = find_next_zero_bit(&tcu->pwm_channels_mask,
+ soc_info->num_channels,
+ tcu->timer_channel + 1);
+
+ ret = ingenic_tcu_clocksource_init(np, tcu);
+ if (ret) {
+ pr_crit("%s: Unable to init clocksource: %d\n", __func__, ret);
+ goto err_free_ingenic_tcu;
+ }
+
+ ret = ingenic_tcu_timer_init(np, tcu);
+ if (ret)
+ goto err_tcu_clocksource_cleanup;
+
+ /* Register the sched_clock at the end as there's no way to undo it */
+ rate = clk_get_rate(tcu->cs_clk);
+ sched_clock_register(ingenic_tcu_timer_read, 16, rate);
+
+ return 0;
+
+err_tcu_clocksource_cleanup:
+ clocksource_unregister(&tcu->cs);
+ clk_disable_unprepare(tcu->cs_clk);
+ clk_put(tcu->cs_clk);
+err_free_ingenic_tcu:
+ kfree(tcu);
+ return ret;
+}
+
+TIMER_OF_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu", ingenic_tcu_init);
+TIMER_OF_DECLARE(jz4725b_tcu_intc, "ingenic,jz4725b-tcu", ingenic_tcu_init);
+TIMER_OF_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu", ingenic_tcu_init);
+
+
+static int __init ingenic_tcu_probe(struct platform_device *pdev)
+{
+ platform_set_drvdata(pdev, ingenic_tcu);
+
+ return 0;
+}
+
+static int __maybe_unused ingenic_tcu_suspend(struct device *dev)
+{
+ struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+
+ clk_disable(tcu->cs_clk);
+ clk_disable(tcu->timer_clk);
+ return 0;
+}
+
+static int __maybe_unused ingenic_tcu_resume(struct device *dev)
+{
+ struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_enable(tcu->timer_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(tcu->cs_clk);
+ if (ret) {
+ clk_disable(tcu->timer_clk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops __maybe_unused ingenic_tcu_pm_ops = {
+ /* _noirq: We want the TCU clocks to be gated last / ungated first */
+ .suspend_noirq = ingenic_tcu_suspend,
+ .resume_noirq = ingenic_tcu_resume,
+};
+
+static struct platform_driver ingenic_tcu_driver = {
+ .driver = {
+ .name = "ingenic-tcu-timer",
+#ifdef CONFIG_PM_SLEEP
+ .pm = &ingenic_tcu_pm_ops,
+#endif
+ .of_match_table = ingenic_tcu_of_match,
+ },
+};
+builtin_platform_driver_probe(ingenic_tcu_driver, ingenic_tcu_probe);
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 08/13] clk: jz4740: Add TCU clock
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (6 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 07/13] clocksource: Add a new timer-ingenic driver Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
` (4 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek, Rob Herring
Add the missing TCU clock to the list of clocks supplied by the CGU for
the JZ4740 SoC.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
---
Notes:
v5: New patch
v6-v14: No change
drivers/clk/ingenic/jz4740-cgu.c | 6 ++++++
include/dt-bindings/clock/jz4740-cgu.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index c77f4e1506dc..176d911b5839 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -203,6 +203,12 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 5 },
},
+
+ [JZ4740_CLK_TCU] = {
+ "tcu", CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 1 },
+ },
};
static void __init jz4740_cgu_init(struct device_node *np)
diff --git a/include/dt-bindings/clock/jz4740-cgu.h b/include/dt-bindings/clock/jz4740-cgu.h
index 6ed83f926ae7..e82d77028581 100644
--- a/include/dt-bindings/clock/jz4740-cgu.h
+++ b/include/dt-bindings/clock/jz4740-cgu.h
@@ -34,5 +34,6 @@
#define JZ4740_CLK_ADC 19
#define JZ4740_CLK_I2C 20
#define JZ4740_CLK_AIC 21
+#define JZ4740_CLK_TCU 22
#endif /* __DT_BINDINGS_CLOCK_JZ4740_CGU_H__ */
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (7 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 08/13] clk: jz4740: Add TCU clock Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 10/13] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
` (3 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
Add DTS nodes for the JZ4780, JZ4770 and JZ4740 devicetree files.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
Notes:
v5: New patch
v6: Fix register lengths in watchdog/pwm nodes
v7: No change
v8: - Fix wrong start address for PWM node
- Add system timer and clocksource sub-nodes
v9: Drop timer and clocksource sub-nodes
v10-v11: No change
v12: Drop PWM/watchdog/OST sub-nodes, for now.
v13-v14: No change
arch/mips/boot/dts/ingenic/jz4740.dtsi | 22 ++++++++++++++++++++++
arch/mips/boot/dts/ingenic/jz4770.dtsi | 21 +++++++++++++++++++++
arch/mips/boot/dts/ingenic/jz4780.dtsi | 21 +++++++++++++++++++++
3 files changed, 64 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 2beb78a62b7d..807d9702d4cf 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -53,6 +53,28 @@
clock-names = "rtc";
};
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4740-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4740_CLK_RTC
+ &cgu JZ4740_CLK_EXT
+ &cgu JZ4740_CLK_PCLK
+ &cgu JZ4740_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <23 22 21>;
+ };
+
rtc_dev: rtc@10003000 {
compatible = "ingenic,jz4740-rtc";
reg = <0x10003000 0x40>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 49ede6c14ff3..70932fd90902 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -46,6 +46,27 @@
#clock-cells = <1>;
};
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC
+ &cgu JZ4770_CLK_EXT
+ &cgu JZ4770_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+ };
+
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4770-pinctrl";
reg = <0x10010000 0x600>;
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b03cdec56de9..495082ce7fc5 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -46,6 +46,27 @@
#clock-cells = <1>;
};
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4780_CLK_RTCLK
+ &cgu JZ4780_CLK_EXCLK
+ &cgu JZ4780_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+ };
+
rtc_dev: rtc@10003000 {
compatible = "ingenic,jz4780-rtc";
reg = <0x10003000 0x4c>;
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 10/13] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (8 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 11/13] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
` (2 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
The default clock (12 MHz) is too fast for the system timer, which fails
to report time accurately.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
Notes:
v5: New patch
v6: Remove ingenic,clocksource-channel property
v7-v14: No change
arch/mips/boot/dts/ingenic/qi_lb60.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index 76aaf8982554..01b8c917cb33 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -2,6 +2,7 @@
/dts-v1/;
#include "jz4740.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
/ {
compatible = "qi,lb60", "ingenic,jz4740";
@@ -31,3 +32,9 @@
bias-disable;
};
};
+
+&tcu {
+ /* 750 kHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+ assigned-clock-rates = <750000>, <750000>;
+};
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 11/13] MIPS: CI20: Reduce system timer and clocksource to 3 MHz
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (9 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 10/13] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 12/13] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 13/13] MIPS: jz4740: Drop obsolete code Paul Cercueil
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
The default clock (48 MHz) is too fast for the system timer.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
Notes:
v5: New patch
v6: Set also the rate for the clocksource channel's clock
v7: No change
v8: No change
v9: Don't configure clock timer1, as the OS Timer is used as
clocksource on this SoC
v10: Revert back to v8 bahaviour. Let the user choose what
clocksource should be used.
v11-v14: No change
arch/mips/boot/dts/ingenic/ci20.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 4f7b1fa31cf5..2e9952311ecd 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -2,6 +2,7 @@
/dts-v1/;
#include "jz4780.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -238,3 +239,9 @@
bias-disable;
};
};
+
+&tcu {
+ /* 3 MHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+ assigned-clock-rates = <3000000>, <3000000>;
+};
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 12/13] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (10 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 11/13] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
2019-07-01 15:14 ` [PATCH v14 13/13] MIPS: jz4740: Drop obsolete code Paul Cercueil
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
The default clock (12 MHz) is too fast for the system timer.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
Notes:
v8: New patch
v9: Don't configure clock timer1, as the OS Timer is used as
clocksource on this SoC
v10: Revert back to v8 bahaviour. Let the user choose what
clocksource should be used.
v11: No change
v12: Move clocksource to channel 2, as channel 1 is used as PWM
for the backlight.
v13-v14: No change
arch/mips/boot/dts/ingenic/gcw0.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
index 35f0291e8d38..f58d239c2058 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -2,6 +2,7 @@
/dts-v1/;
#include "jz4770.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
/ {
compatible = "gcw,zero", "ingenic,jz4770";
@@ -60,3 +61,12 @@
/* The WiFi module is connected to the UHC. */
status = "okay";
};
+
+&tcu {
+ /* 750 kHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+ assigned-clock-rates = <750000>, <750000>;
+
+ /* PWM1 is in use, so reserve channel #2 for the clocksource */
+ ingenic,pwm-channels-mask = <0xfa>;
+};
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v14 13/13] MIPS: jz4740: Drop obsolete code
2019-07-01 15:13 [PATCH v14 00/13] Ingenic TCU patchset v14 Paul Cercueil
` (11 preceding siblings ...)
2019-07-01 15:14 ` [PATCH v14 12/13] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
@ 2019-07-01 15:14 ` Paul Cercueil
12 siblings, 0 replies; 14+ messages in thread
From: Paul Cercueil @ 2019-07-01 15:14 UTC (permalink / raw)
To: Lee Jones, Jonathan Corbet, Ralf Baechle, Paul Burton,
James Hogan, Michael Turquette, Stephen Boyd, Thomas Gleixner,
Daniel Lezcano
Cc: Mathieu Malaterre, od, devicetree, linux-kernel, linux-doc,
linux-mips, linux-clk, Paul Cercueil, Artur Rojek
The old clocksource/timer platform code is now obsoleted by the newly
introduced TCU drivers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
Notes:
v5: New patch
v6-v11: No change
v12: Only remove clocksource code. The rest will eventually be
removed in a future patchset when the PWM/watchdog drivers
are updated.
v13-v14: No change
arch/mips/jz4740/time.c | 154 +---------------------------------------
1 file changed, 2 insertions(+), 152 deletions(-)
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index a3260c754e65..5476899f0882 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -4,164 +4,14 @@
* JZ4740 platform time support
*/
-#include <linux/clk.h>
#include <linux/clk-provider.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
+#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach-jz4740/clock.h>
-#include <asm/mach-jz4740/irq.h>
#include <asm/mach-jz4740/timer.h>
-#include <asm/time.h>
-
-#include "clock.h"
-
-#define TIMER_CLOCKEVENT 0
-#define TIMER_CLOCKSOURCE 1
-
-static uint16_t jz4740_jiffies_per_tick;
-
-static u64 jz4740_clocksource_read(struct clocksource *cs)
-{
- return jz4740_timer_get_count(TIMER_CLOCKSOURCE);
-}
-
-static struct clocksource jz4740_clocksource = {
- .name = "jz4740-timer",
- .rating = 200,
- .read = jz4740_clocksource_read,
- .mask = CLOCKSOURCE_MASK(16),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static u64 notrace jz4740_read_sched_clock(void)
-{
- return jz4740_timer_get_count(TIMER_CLOCKSOURCE);
-}
-
-static irqreturn_t jz4740_clockevent_irq(int irq, void *devid)
-{
- struct clock_event_device *cd = devid;
-
- jz4740_timer_ack_full(TIMER_CLOCKEVENT);
-
- if (!clockevent_state_periodic(cd))
- jz4740_timer_disable(TIMER_CLOCKEVENT);
-
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static int jz4740_clockevent_set_periodic(struct clock_event_device *evt)
-{
- jz4740_timer_set_count(TIMER_CLOCKEVENT, 0);
- jz4740_timer_set_period(TIMER_CLOCKEVENT, jz4740_jiffies_per_tick);
- jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT);
- jz4740_timer_enable(TIMER_CLOCKEVENT);
-
- return 0;
-}
-
-static int jz4740_clockevent_resume(struct clock_event_device *evt)
-{
- jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT);
- jz4740_timer_enable(TIMER_CLOCKEVENT);
-
- return 0;
-}
-
-static int jz4740_clockevent_shutdown(struct clock_event_device *evt)
-{
- jz4740_timer_disable(TIMER_CLOCKEVENT);
-
- return 0;
-}
-
-static int jz4740_clockevent_set_next(unsigned long evt,
- struct clock_event_device *cd)
-{
- jz4740_timer_set_count(TIMER_CLOCKEVENT, 0);
- jz4740_timer_set_period(TIMER_CLOCKEVENT, evt);
- jz4740_timer_enable(TIMER_CLOCKEVENT);
-
- return 0;
-}
-
-static struct clock_event_device jz4740_clockevent = {
- .name = "jz4740-timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = jz4740_clockevent_set_next,
- .set_state_shutdown = jz4740_clockevent_shutdown,
- .set_state_periodic = jz4740_clockevent_set_periodic,
- .set_state_oneshot = jz4740_clockevent_shutdown,
- .tick_resume = jz4740_clockevent_resume,
- .rating = 200,
-#ifdef CONFIG_MACH_JZ4740
- .irq = JZ4740_IRQ_TCU0,
-#endif
-#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
- .irq = JZ4780_IRQ_TCU2,
-#endif
-};
-
-static struct irqaction timer_irqaction = {
- .handler = jz4740_clockevent_irq,
- .flags = IRQF_PERCPU | IRQF_TIMER,
- .name = "jz4740-timerirq",
- .dev_id = &jz4740_clockevent,
-};
void __init plat_time_init(void)
{
- int ret;
- uint32_t clk_rate;
- uint16_t ctrl;
- struct clk *ext_clk;
-
of_clk_init(NULL);
jz4740_timer_init();
-
- ext_clk = clk_get(NULL, "ext");
- if (IS_ERR(ext_clk))
- panic("unable to get ext clock");
- clk_rate = clk_get_rate(ext_clk) >> 4;
- clk_put(ext_clk);
-
- jz4740_jiffies_per_tick = DIV_ROUND_CLOSEST(clk_rate, HZ);
-
- clockevent_set_clock(&jz4740_clockevent, clk_rate);
- jz4740_clockevent.min_delta_ns = clockevent_delta2ns(100, &jz4740_clockevent);
- jz4740_clockevent.min_delta_ticks = 100;
- jz4740_clockevent.max_delta_ns = clockevent_delta2ns(0xffff, &jz4740_clockevent);
- jz4740_clockevent.max_delta_ticks = 0xffff;
- jz4740_clockevent.cpumask = cpumask_of(0);
-
- clockevents_register_device(&jz4740_clockevent);
-
- ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
-
- if (ret)
- printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
-
- sched_clock_register(jz4740_read_sched_clock, 16, clk_rate);
-
- setup_irq(jz4740_clockevent.irq, &timer_irqaction);
-
- ctrl = JZ_TIMER_CTRL_PRESCALE_16 | JZ_TIMER_CTRL_SRC_EXT;
-
- jz4740_timer_set_ctrl(TIMER_CLOCKEVENT, ctrl);
- jz4740_timer_set_ctrl(TIMER_CLOCKSOURCE, ctrl);
-
- jz4740_timer_set_period(TIMER_CLOCKEVENT, jz4740_jiffies_per_tick);
- jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT);
-
- jz4740_timer_set_period(TIMER_CLOCKSOURCE, 0xffff);
-
- jz4740_timer_enable(TIMER_CLOCKEVENT);
- jz4740_timer_enable(TIMER_CLOCKSOURCE);
+ timer_probe();
}
--
2.21.0.593.g511ec345e18
^ permalink raw reply related [flat|nested] 14+ messages in thread