[PATCH AUTOSEL 5.1 01/39] ARM: dts: meson8: fix GPU interrupts and drop an undocumented property

[PATCH AUTOSEL 5.1 01/39] ARM: dts: meson8: fix GPU interrupts and drop an undocumented property

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 01dfdd7b4693496854ac92d1ebfb18d7b108f777 ]

The interrupts in Amlogic's vendor kernel sources are all contiguous.
There are two typos leading to pp2 and pp4 as well as ppmmu2 and ppmmu4
incorrectly sharing the same interrupt line.
Fix this by using interrupt 170 for pp2 and 171 for ppmmu2.

Also drop the undocumented "switch-delay" which is a left-over from my
experiments with an early lima kernel driver when it was still
out-of-tree and required this property on Amlogic SoCs.

Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index a9781243453e..048b55c8dc1e 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -248,8 +248,8 @@
 				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
@@ -264,7 +264,6 @@
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
 			operating-points-v2 = <&gpu_opp_table>;
-			switch-delay = <0xffff>;
 		};
 	};
 }; /* end of / */
-- 
2.20.1

[PATCH AUTOSEL 5.1 02/39] ARM: dts: meson8b: fix the operating voltage of the Mali GPU

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 26d65140e92a626e39c73c9abf769fd174bf5076 ]

Amlogic's vendor kernel defines an OPP for the GPU on Meson8b boards
with a voltage of 1.15V. It turns out that the vendor kernel relies on
the bootloader to set up the voltage. The bootloader however sets a
fixed voltage of 1.10V.

Amlogic's patched u-boot sources (uboot-2015-01-15-23a3562521) confirm
this:
$ grep -oiE "VDD(EE|AO)_VOLTAGE[ ]+[0-9]+" board/amlogic/configs/m8b_*
  board/amlogic/configs/m8b_m100_v1.h:VDDAO_VOLTAGE            1100
  board/amlogic/configs/m8b_m101_v1.h:VDDAO_VOLTAGE            1100
  board/amlogic/configs/m8b_m102_v1.h:VDDAO_VOLTAGE            1100
  board/amlogic/configs/m8b_m200_v1.h:VDDAO_VOLTAGE            1100
  board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE            1100
  board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE            1100
  board/amlogic/configs/m8b_m202_v1.h:VDDEE_VOLTAGE            1100

Another hint at this is the VDDEE voltage on the EC-100 and Odroid-C1
boards. The VDDEE regulator supplies the Mali GPU. It's basically a copy
of the VCCK (CPU supply) which means it's limited to 0.86V to 1.14V.

Update the operating voltage of the Mali GPU on Meson8b to 1.10V so it
matches with what the vendor u-boot sets.

Fixes: c3ea80b6138cae ("ARM: dts: meson8b: add the Mali-450 MP2 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index fe84a8c3ce81..6b80aff32fc2 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -163,23 +163,23 @@
 
 		opp-255000000 {
 			opp-hz = /bits/ 64 <255000000>;
-			opp-microvolt = <1150000>;
+			opp-microvolt = <1100000>;
 		};
 		opp-364300000 {
 			opp-hz = /bits/ 64 <364300000>;
-			opp-microvolt = <1150000>;
+			opp-microvolt = <1100000>;
 		};
 		opp-425000000 {
 			opp-hz = /bits/ 64 <425000000>;
-			opp-microvolt = <1150000>;
+			opp-microvolt = <1100000>;
 		};
 		opp-510000000 {
 			opp-hz = /bits/ 64 <510000000>;
-			opp-microvolt = <1150000>;
+			opp-microvolt = <1100000>;
 		};
 		opp-637500000 {
 			opp-hz = /bits/ 64 <637500000>;
-			opp-microvolt = <1150000>;
+			opp-microvolt = <1100000>;
 			turbo-mode;
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 5.1 03/39] idr: Fix idr_get_next race with idr_remove

[Sasha Levin]

From: "Matthew Wilcox (Oracle)" <willy@infradead.org>

[ Upstream commit 5c089fd0c73411f2170ab795c9ffc16718c7d007 ]

If the entry is deleted from the IDR between the call to
radix_tree_iter_find() and rcu_dereference_raw(), idr_get_next()
will return NULL, which will end the iteration prematurely.  We should
instead continue to the next entry in the IDR.  This only happens if the
iteration is protected by the RCU lock.  Most IDR users use a spinlock
or semaphore to exclude simultaneous modifications.  It was noticed once
the PID allocator was converted to use the IDR, as it uses the RCU lock,
but there may be other users elsewhere in the kernel.

We can't use the normal pattern of calling radix_tree_deref_retry()
(which catches both a retry entry in a leaf node and a node entry in
the root) as the IDR supports storing entries which are unaligned,
which will trigger an infinite loop if they are encountered.  Instead,
we have to explicitly check whether the entry is a retry entry.

Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree")
Reported-by: Brendan Gregg <bgregg@netflix.com>
Tested-by: Brendan Gregg <bgregg@netflix.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/idr.c                           | 14 +++++++--
 tools/testing/radix-tree/idr-test.c | 46 +++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+), 2 deletions(-)

diff --git a/lib/idr.c b/lib/idr.c
index cb1db9b8d3f6..da3021e7c2b5 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -227,11 +227,21 @@ void *idr_get_next(struct idr *idr, int *nextid)
 {
 	struct radix_tree_iter iter;
 	void __rcu **slot;
+	void *entry = NULL;
 	unsigned long base = idr->idr_base;
 	unsigned long id = *nextid;
 
 	id = (id < base) ? 0 : id - base;
-	slot = radix_tree_iter_find(&idr->idr_rt, &iter, id);
+	radix_tree_for_each_slot(slot, &idr->idr_rt, &iter, id) {
+		entry = rcu_dereference_raw(*slot);
+		if (!entry)
+			continue;
+		if (!xa_is_internal(entry))
+			break;
+		if (slot != &idr->idr_rt.xa_head && !xa_is_retry(entry))
+			break;
+		slot = radix_tree_iter_retry(&iter);
+	}
 	if (!slot)
 		return NULL;
 	id = iter.index + base;
@@ -240,7 +250,7 @@ void *idr_get_next(struct idr *idr, int *nextid)
 		return NULL;
 
 	*nextid = id;
-	return rcu_dereference_raw(*slot);
+	return entry;
 }
 EXPORT_SYMBOL(idr_get_next);
 
diff --git a/tools/testing/radix-tree/idr-test.c b/tools/testing/radix-tree/idr-test.c
index 1b63bdb7688f..fe33be4c2475 100644
--- a/tools/testing/radix-tree/idr-test.c
+++ b/tools/testing/radix-tree/idr-test.c
@@ -287,6 +287,51 @@ static void idr_align_test(struct idr *idr)
 	}
 }
 
+DEFINE_IDR(find_idr);
+
+static void *idr_throbber(void *arg)
+{
+	time_t start = time(NULL);
+	int id = *(int *)arg;
+
+	rcu_register_thread();
+	do {
+		idr_alloc(&find_idr, xa_mk_value(id), id, id + 1, GFP_KERNEL);
+		idr_remove(&find_idr, id);
+	} while (time(NULL) < start + 10);
+	rcu_unregister_thread();
+
+	return NULL;
+}
+
+void idr_find_test_1(int anchor_id, int throbber_id)
+{
+	pthread_t throbber;
+	time_t start = time(NULL);
+
+	pthread_create(&throbber, NULL, idr_throbber, &throbber_id);
+
+	BUG_ON(idr_alloc(&find_idr, xa_mk_value(anchor_id), anchor_id,
+				anchor_id + 1, GFP_KERNEL) != anchor_id);
+
+	do {
+		int id = 0;
+		void *entry = idr_get_next(&find_idr, &id);
+		BUG_ON(entry != xa_mk_value(id));
+	} while (time(NULL) < start + 11);
+
+	pthread_join(throbber, NULL);
+
+	idr_remove(&find_idr, anchor_id);
+	BUG_ON(!idr_is_empty(&find_idr));
+}
+
+void idr_find_test(void)
+{
+	idr_find_test_1(100000, 0);
+	idr_find_test_1(0, 100000);
+}
+
 void idr_checks(void)
 {
 	unsigned long i;
@@ -368,6 +413,7 @@ void idr_checks(void)
 	idr_u32_test(1);
 	idr_u32_test(0);
 	idr_align_test(&idr);
+	idr_find_test();
 }
 
 #define module_init(x)
-- 
2.20.1

[PATCH AUTOSEL 5.1 04/39] irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus

[Sasha Levin]

From: Guo Ren <ren_guo@c-sky.com>

[ Upstream commit db56c5128e6625cb16efc4910b60627e46f608e3 ]

The csky,mpintc could deliver a external irq to one cpu or all cpus, but
it couldn't deliver a external irq to a group of cpus with cpu_mask. So
we only use auto deliver mode when affinity mask_val is equal to
cpu_present_mask.

There is no limitation for only two cpus in SMP system.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-csky-mpintc.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-csky-mpintc.c b/drivers/irqchip/irq-csky-mpintc.c
index c67c961ab6cc..a4c1aacba1ff 100644
--- a/drivers/irqchip/irq-csky-mpintc.c
+++ b/drivers/irqchip/irq-csky-mpintc.c
@@ -89,8 +89,19 @@ static int csky_irq_set_affinity(struct irq_data *d,
 	if (cpu >= nr_cpu_ids)
 		return -EINVAL;
 
-	/* Enable interrupt destination */
-	cpu |= BIT(31);
+	/*
+	 * The csky,mpintc could support auto irq deliver, but it only
+	 * could deliver external irq to one cpu or all cpus. So it
+	 * doesn't support deliver external irq to a group of cpus
+	 * with cpu_mask.
+	 * SO we only use auto deliver mode when affinity mask_val is
+	 * equal to cpu_present_mask.
+	 *
+	 */
+	if (cpumask_equal(mask_val, cpu_present_mask))
+		cpu = 0;
+	else
+		cpu |= BIT(31);
 
 	writel_relaxed(cpu, INTCG_base + INTCG_CIDSTR + offset);
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 05/39] irqchip/gic-v3-its: Fix command queue pointer comparison bug

[Sasha Levin]

From: Heyi Guo <guoheyi@huawei.com>

[ Upstream commit a050fa5476d418fc16b25abe168b3d38ba11e13c ]

When we run several VMs with PCI passthrough and GICv4 enabled, not
pinning vCPUs, we will occasionally see below warnings in dmesg:

ITS queue timeout (65440 65504 480)
ITS cmd its_build_vmovp_cmd failed

The reason for the above issue is that in BUILD_SINGLE_CMD_FUNC:
1. Post the write command.
2. Release the lock.
3. Start to read GITS_CREADR to get the reader pointer.
4. Compare the reader pointer to the target pointer.
5. If reader pointer does not reach the target, sleep 1us and continue
to try.

If we have several processors running the above concurrently, other
CPUs will post write commands while the 1st CPU is waiting the
completion. So we may have below issue:

phase 1:
---rd_idx-----from_idx-----to_idx--0---------

wait 1us:

phase 2:
--------------from_idx-----to_idx--0-rd_idx--

That is the rd_idx may fly ahead of to_idx, and if in case to_idx is
near the wrap point, rd_idx will wrap around. So the below condition
will not be met even after 1s:

if (from_idx < to_idx && rd_idx >= to_idx)

There is another theoretical issue. For a slow and busy ITS, the
initial rd_idx may fall behind from_idx a lot, just as below:

---rd_idx---0--from_idx-----to_idx-----------

This will cause the wait function exit too early.

Actually, it does not make much sense to use from_idx to judge if
to_idx is wrapped, but we need a initial rd_idx when lock is still
acquired, and it can be used to judge whether to_idx is wrapped and
the current rd_idx is wrapped.

We switch to a method of calculating the delta of two adjacent reads
and accumulating it to get the sum, so that we can get the real rd_idx
from the wrapped value even when the queue is almost full.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 35 ++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 11 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 7577755bdcf4..eead9def9921 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -745,32 +745,43 @@ static void its_flush_cmd(struct its_node *its, struct its_cmd_block *cmd)
 }
 
 static int its_wait_for_range_completion(struct its_node *its,
-					 struct its_cmd_block *from,
+					 u64	prev_idx,
 					 struct its_cmd_block *to)
 {
-	u64 rd_idx, from_idx, to_idx;
+	u64 rd_idx, to_idx, linear_idx;
 	u32 count = 1000000;	/* 1s! */
 
-	from_idx = its_cmd_ptr_to_offset(its, from);
+	/* Linearize to_idx if the command set has wrapped around */
 	to_idx = its_cmd_ptr_to_offset(its, to);
+	if (to_idx < prev_idx)
+		to_idx += ITS_CMD_QUEUE_SZ;
+
+	linear_idx = prev_idx;
 
 	while (1) {
+		s64 delta;
+
 		rd_idx = readl_relaxed(its->base + GITS_CREADR);
 
-		/* Direct case */
-		if (from_idx < to_idx && rd_idx >= to_idx)
-			break;
+		/*
+		 * Compute the read pointer progress, taking the
+		 * potential wrap-around into account.
+		 */
+		delta = rd_idx - prev_idx;
+		if (rd_idx < prev_idx)
+			delta += ITS_CMD_QUEUE_SZ;
 
-		/* Wrapped case */
-		if (from_idx >= to_idx && rd_idx >= to_idx && rd_idx < from_idx)
+		linear_idx += delta;
+		if (linear_idx >= to_idx)
 			break;
 
 		count--;
 		if (!count) {
-			pr_err_ratelimited("ITS queue timeout (%llu %llu %llu)\n",
-					   from_idx, to_idx, rd_idx);
+			pr_err_ratelimited("ITS queue timeout (%llu %llu)\n",
+					   to_idx, linear_idx);
 			return -1;
 		}
+		prev_idx = rd_idx;
 		cpu_relax();
 		udelay(1);
 	}
@@ -787,6 +798,7 @@ void name(struct its_node *its,						\
 	struct its_cmd_block *cmd, *sync_cmd, *next_cmd;		\
 	synctype *sync_obj;						\
 	unsigned long flags;						\
+	u64 rd_idx;							\
 									\
 	raw_spin_lock_irqsave(&its->lock, flags);			\
 									\
@@ -808,10 +820,11 @@ void name(struct its_node *its,						\
 	}								\
 									\
 post:									\
+	rd_idx = readl_relaxed(its->base + GITS_CREADR);		\
 	next_cmd = its_post_commands(its);				\
 	raw_spin_unlock_irqrestore(&its->lock, flags);			\
 									\
-	if (its_wait_for_range_completion(its, cmd, next_cmd))		\
+	if (its_wait_for_range_completion(its, rd_idx, next_cmd))	\
 		pr_err_ratelimited("ITS cmd %ps failed\n", builder);	\
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 06/39] clk: ti: clkctrl: Fix returning uninitialized data

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 41b3588dba6ef4b7995735a97e47ff0aeea6c276 ]

If we do a clk_get() for a clock that does not exists, we have
_ti_omap4_clkctrl_xlate() return uninitialized data if no match
is found. This can be seen in some cases with SLAB_DEBUG enabled:

Unable to handle kernel paging request at virtual address 5a5a5a5a
...
clk_hw_create_clk.part.33
sysc_notifier_call
notifier_call_chain
blocking_notifier_call_chain
device_add

Let's fix this by setting a found flag only when we find a match.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: 88a172526c32 ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/clkctrl.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 3325ee43bcc1..626090b59cd7 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -229,6 +229,7 @@ static struct clk_hw *_ti_omap4_clkctrl_xlate(struct of_phandle_args *clkspec,
 {
 	struct omap_clkctrl_provider *provider = data;
 	struct omap_clkctrl_clk *entry;
+	bool found = false;
 
 	if (clkspec->args_count != 2)
 		return ERR_PTR(-EINVAL);
@@ -238,11 +239,13 @@ static struct clk_hw *_ti_omap4_clkctrl_xlate(struct of_phandle_args *clkspec,
 
 	list_for_each_entry(entry, &provider->clocks, node) {
 		if (entry->reg_offset == clkspec->args[0] &&
-		    entry->bit_offset == clkspec->args[1])
+		    entry->bit_offset == clkspec->args[1]) {
+			found = true;
 			break;
+		}
 	}
 
-	if (!entry)
+	if (!found)
 		return ERR_PTR(-EINVAL);
 
 	return entry->clk;
-- 
2.20.1

[PATCH AUTOSEL 5.1 07/39] efi/bgrt: Drop BGRT status field reserved bits check

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit a483fcab38b43fb34a7f12ab1daadd3907f150e2 ]

Starting with ACPI 6.2 bits 1 and 2 of the BGRT status field are no longer
reserved. These bits are now used to indicate if the image needs to be
rotated before being displayed.

The first device using these bits has now shown up (the GPD MicroPC) and
the reserved bits check causes us to reject the valid BGRT table on this
device.

Rather then changing the reserved bits check, allowing only the 2 new bits,
instead just completely remove it so that we do not end up with a similar
problem when more bits are added in the future.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/efi-bgrt.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/firmware/efi/efi-bgrt.c b/drivers/firmware/efi/efi-bgrt.c
index a2384184a7de..b07c17643210 100644
--- a/drivers/firmware/efi/efi-bgrt.c
+++ b/drivers/firmware/efi/efi-bgrt.c
@@ -47,11 +47,6 @@ void __init efi_bgrt_init(struct acpi_table_header *table)
 		       bgrt->version);
 		goto out;
 	}
-	if (bgrt->status & 0xfe) {
-		pr_notice("Ignoring BGRT: reserved status bits are non-zero %u\n",
-		       bgrt->status);
-		goto out;
-	}
 	if (bgrt->image_type != 0) {
 		pr_notice("Ignoring BGRT: invalid image type %u (expected 0)\n",
 		       bgrt->image_type);
-- 
2.20.1

[PATCH AUTOSEL 5.1 08/39] arm64: dts: ls1028a: Fix CPU idle fail.

[Sasha Levin]

From: Ran Wang <ran.wang_1@nxp.com>

[ Upstream commit 53f2ac9d3aa881ed419054076042898b77c27ee4 ]

PSCI spec define 1st parameter's bit 16 of function CPU_SUSPEND to
indicate CPU State Type: 0 for standby, 1 for power down. In this
case, we want to select standby for CPU idle feature. But current
setting wrongly select power down and cause CPU SUSPEND fail every
time. Need this fix.

Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 2896bbcfa3bb..228872549f01 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -28,7 +28,7 @@
 			enable-method = "psci";
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
-			cpu-idle-states = <&CPU_PH20>;
+			cpu-idle-states = <&CPU_PW20>;
 		};
 
 		cpu1: cpu@1 {
@@ -38,7 +38,7 @@
 			enable-method = "psci";
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
-			cpu-idle-states = <&CPU_PH20>;
+			cpu-idle-states = <&CPU_PW20>;
 		};
 
 		l2: l2-cache {
@@ -53,13 +53,13 @@
 		 */
 		entry-method = "arm,psci";
 
-		CPU_PH20: cpu-ph20 {
-			compatible = "arm,idle-state";
-			idle-state-name = "PH20";
-			arm,psci-suspend-param = <0x00010000>;
-			entry-latency-us = <1000>;
-			exit-latency-us = <1000>;
-			min-residency-us = <3000>;
+		CPU_PW20: cpu-pw20 {
+			  compatible = "arm,idle-state";
+			  idle-state-name = "PW20";
+			  arm,psci-suspend-param = <0x0>;
+			  entry-latency-us = <2000>;
+			  exit-latency-us = <2000>;
+			  min-residency-us = <6000>;
 		};
 	};
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 09/39] selftests/powerpc: Add test of fork with mapping above 512TB

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 16391bfc862342f285195013b73c1394fab28b97 ]

This tests that when a process with a mapping above 512TB forks we
correctly separate the parent and child address spaces. This exercises
the bug in the context id handling fixed in the previous commit.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/powerpc/mm/.gitignore |  3 +-
 tools/testing/selftests/powerpc/mm/Makefile   |  4 +-
 .../powerpc/mm/large_vm_fork_separation.c     | 87 +++++++++++++++++++
 3 files changed, 92 insertions(+), 2 deletions(-)
 create mode 100644 tools/testing/selftests/powerpc/mm/large_vm_fork_separation.c

diff --git a/tools/testing/selftests/powerpc/mm/.gitignore b/tools/testing/selftests/powerpc/mm/.gitignore
index ba919308fe30..d503b8764a8e 100644
--- a/tools/testing/selftests/powerpc/mm/.gitignore
+++ b/tools/testing/selftests/powerpc/mm/.gitignore
@@ -3,4 +3,5 @@ subpage_prot
 tempfile
 prot_sao
 segv_errors
-wild_bctr
\ No newline at end of file
+wild_bctr
+large_vm_fork_separation
\ No newline at end of file
diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
index 43d68420e363..f1fbc15800c4 100644
--- a/tools/testing/selftests/powerpc/mm/Makefile
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -2,7 +2,8 @@
 noarg:
 	$(MAKE) -C ../
 
-TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors wild_bctr
+TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors wild_bctr \
+		  large_vm_fork_separation
 TEST_GEN_FILES := tempfile
 
 top_srcdir = ../../../../..
@@ -13,6 +14,7 @@ $(TEST_GEN_PROGS): ../harness.c
 $(OUTPUT)/prot_sao: ../utils.c
 
 $(OUTPUT)/wild_bctr: CFLAGS += -m64
+$(OUTPUT)/large_vm_fork_separation: CFLAGS += -m64
 
 $(OUTPUT)/tempfile:
 	dd if=/dev/zero of=$@ bs=64k count=1
diff --git a/tools/testing/selftests/powerpc/mm/large_vm_fork_separation.c b/tools/testing/selftests/powerpc/mm/large_vm_fork_separation.c
new file mode 100644
index 000000000000..2363a7f3ab0d
--- /dev/null
+++ b/tools/testing/selftests/powerpc/mm/large_vm_fork_separation.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2019, Michael Ellerman, IBM Corp.
+//
+// Test that allocating memory beyond the memory limit and then forking is
+// handled correctly, ie. the child is able to access the mappings beyond the
+// memory limit and the child's writes are not visible to the parent.
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "utils.h"
+
+
+#ifndef MAP_FIXED_NOREPLACE
+#define MAP_FIXED_NOREPLACE	MAP_FIXED	// "Should be safe" above 512TB
+#endif
+
+
+static int test(void)
+{
+	int p2c[2], c2p[2], rc, status, c, *p;
+	unsigned long page_size;
+	pid_t pid;
+
+	page_size = sysconf(_SC_PAGESIZE);
+	SKIP_IF(page_size != 65536);
+
+	// Create a mapping at 512TB to allocate an extended_id
+	p = mmap((void *)(512ul << 40), page_size, PROT_READ | PROT_WRITE,
+		MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED_NOREPLACE, -1, 0);
+	if (p == MAP_FAILED) {
+		perror("mmap");
+		printf("Error: couldn't mmap(), confirm kernel has 4TB support?\n");
+		return 1;
+	}
+
+	printf("parent writing %p = 1\n", p);
+	*p = 1;
+
+	FAIL_IF(pipe(p2c) == -1 || pipe(c2p) == -1);
+
+	pid = fork();
+	if (pid == 0) {
+		FAIL_IF(read(p2c[0], &c, 1) != 1);
+
+		pid = getpid();
+		printf("child writing  %p = %d\n", p, pid);
+		*p = pid;
+
+		FAIL_IF(write(c2p[1], &c, 1) != 1);
+		FAIL_IF(read(p2c[0], &c, 1) != 1);
+		exit(0);
+	}
+
+	c = 0;
+	FAIL_IF(write(p2c[1], &c, 1) != 1);
+	FAIL_IF(read(c2p[0], &c, 1) != 1);
+
+	// Prevent compiler optimisation
+	barrier();
+
+	rc = 0;
+	printf("parent reading %p = %d\n", p, *p);
+	if (*p != 1) {
+		printf("Error: BUG! parent saw child's write! *p = %d\n", *p);
+		rc = 1;
+	}
+
+	FAIL_IF(write(p2c[1], &c, 1) != 1);
+	FAIL_IF(waitpid(pid, &status, 0) == -1);
+	FAIL_IF(!WIFEXITED(status) || WEXITSTATUS(status));
+
+	if (rc == 0)
+		printf("success: test completed OK\n");
+
+	return rc;
+}
+
+int main(void)
+{
+	return test_harness(test, "large_vm_fork_separation");
+}
-- 
2.20.1

[PATCH AUTOSEL 5.1 10/39] perf/core: Fix perf_sample_regs_user() mm check

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 085ebfe937d7a7a5df1729f35a12d6d655fea68c ]

perf_sample_regs_user() uses 'current->mm' to test for the presence of
userspace, but this is insufficient, consider use_mm().

A better test is: '!(current->flags & PF_KTHREAD)', exec() clears
PF_KTHREAD after it sets the new ->mm but before it drops to userspace
for the first time.

Possibly obsoletes: bf05fc25f268 ("powerpc/perf: Fix oops when kthread execs user process")

Reported-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reported-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4018994f3d87 ("perf: Add ability to attach user level registers dump to sample")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index dc7dead2d2cc..f33bd0a89391 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5913,7 +5913,7 @@ static void perf_sample_regs_user(struct perf_regs *regs_user,
 	if (user_mode(regs)) {
 		regs_user->abi = perf_reg_abi(current);
 		regs_user->regs = regs;
-	} else if (current->mm) {
+	} else if (!(current->flags & PF_KTHREAD)) {
 		perf_get_regs_user(regs_user, regs, regs_user_copy);
 	} else {
 		regs_user->abi = PERF_SAMPLE_REGS_ABI_NONE;
-- 
2.20.1

[PATCH AUTOSEL 5.1 11/39] ARM: dts: gemini Fix up DNS-313 compatible string

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 36558020128b1a48b7bddd5792ee70e3f64b04b0 ]

It's a simple typo in the DNS file, which was pretty serious.
No scripts were working properly. Fix it up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index b12504e10f0b..360642a02a48 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
-	compatible = "dlink,dir-313", "cortina,gemini";
+	compatible = "dlink,dns-313", "cortina,gemini";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 12/39] ARM: omap2: remove incorrect __init annotation

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 27e23d8975270df6999f8b5b3156fc0c04927451 ]

omap3xxx_prm_enable_io_wakeup() is marked __init, but its caller is not, so
we get a warning with clang-8:

WARNING: vmlinux.o(.text+0x343c8): Section mismatch in reference from the function omap3xxx_prm_late_init() to the function .init.text:omap3xxx_prm_enable_io_wakeup()
The function omap3xxx_prm_late_init() references
the function __init omap3xxx_prm_enable_io_wakeup().
This is often because omap3xxx_prm_late_init lacks a __init
annotation or the annotation of omap3xxx_prm_enable_io_wakeup is wrong.

When building with gcc, omap3xxx_prm_enable_io_wakeup() is always
inlined, so we never noticed in the past.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/prm3xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 05858f966f7d..dfa65fc2c82b 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -433,7 +433,7 @@ static void omap3_prm_reconfigure_io_chain(void)
  * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
  * No return value.
  */
-static void __init omap3xxx_prm_enable_io_wakeup(void)
+static void omap3xxx_prm_enable_io_wakeup(void)
 {
 	if (prm_features & PRM_HAS_IO_WAKEUP)
 		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
-- 
2.20.1

[PATCH AUTOSEL 5.1 13/39] afs: Fix uninitialised spinlock afs_volume::cb_break_lock

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 90fa9b64523a645a97edc0bdcf2d74759957eeee ]

Fix the cb_break_lock spinlock in afs_volume struct by initialising it when
the volume record is allocated.

Also rename the lock to cb_v_break_lock to distinguish it from the lock of
the same name in the afs_server struct.

Without this, the following trace may be observed when a volume-break
callback is received:

  INFO: trying to register non-static key.
  the code is fine but needs lockdep annotation.
  turning off the locking correctness validator.
  CPU: 2 PID: 50 Comm: kworker/2:1 Not tainted 5.2.0-rc1-fscache+ #3045
  Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
  Workqueue: afs SRXAFSCB_CallBack
  Call Trace:
   dump_stack+0x67/0x8e
   register_lock_class+0x23b/0x421
   ? check_usage_forwards+0x13c/0x13c
   __lock_acquire+0x89/0xf73
   lock_acquire+0x13b/0x166
   ? afs_break_callbacks+0x1b2/0x3dd
   _raw_write_lock+0x2c/0x36
   ? afs_break_callbacks+0x1b2/0x3dd
   afs_break_callbacks+0x1b2/0x3dd
   ? trace_event_raw_event_afs_server+0x61/0xac
   SRXAFSCB_CallBack+0x11f/0x16c
   process_one_work+0x2c5/0x4ee
   ? worker_thread+0x234/0x2ac
   worker_thread+0x1d8/0x2ac
   ? cancel_delayed_work_sync+0xf/0xf
   kthread+0x11f/0x127
   ? kthread_park+0x76/0x76
   ret_from_fork+0x24/0x30

Fixes: 68251f0a6818 ("afs: Fix whole-volume callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/callback.c | 4 ++--
 fs/afs/internal.h | 2 +-
 fs/afs/volume.c   | 1 +
 3 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/afs/callback.c b/fs/afs/callback.c
index 128f2dbe256a..fee6fde79e6b 100644
--- a/fs/afs/callback.c
+++ b/fs/afs/callback.c
@@ -278,9 +278,9 @@ static void afs_break_one_callback(struct afs_server *server,
 			struct afs_super_info *as = AFS_FS_S(cbi->sb);
 			struct afs_volume *volume = as->volume;
 
-			write_lock(&volume->cb_break_lock);
+			write_lock(&volume->cb_v_break_lock);
 			volume->cb_v_break++;
-			write_unlock(&volume->cb_break_lock);
+			write_unlock(&volume->cb_v_break_lock);
 		} else {
 			data.volume = NULL;
 			data.fid = *fid;
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 3904ab0b9563..fd0750fb96a5 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -582,7 +582,7 @@ struct afs_volume {
 	unsigned int		servers_seq;	/* Incremented each time ->servers changes */
 
 	unsigned		cb_v_break;	/* Break-everything counter. */
-	rwlock_t		cb_break_lock;
+	rwlock_t		cb_v_break_lock;
 
 	afs_voltype_t		type;		/* type of volume */
 	short			error;
diff --git a/fs/afs/volume.c b/fs/afs/volume.c
index f6eba2def0a1..3e8dbee09f87 100644
--- a/fs/afs/volume.c
+++ b/fs/afs/volume.c
@@ -47,6 +47,7 @@ static struct afs_volume *afs_alloc_volume(struct afs_fs_context *params,
 	atomic_set(&volume->usage, 1);
 	INIT_LIST_HEAD(&volume->proc_link);
 	rwlock_init(&volume->servers_lock);
+	rwlock_init(&volume->cb_v_break_lock);
 	memcpy(volume->name, vldb->name, vldb->name_len + 1);
 
 	slist = afs_alloc_server_list(params->cell, params->key, vldb, type_mask);
-- 
2.20.1

[PATCH AUTOSEL 5.1 14/39] x86/efi: fix a -Wtype-limits compilation warning

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 919aef44d73d5d0c04213cb1bc31149cc074e65e ]

Compiling a kernel with W=1 generates this warning,

arch/x86/platform/efi/quirks.c:731:16: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]

Fixes: 3425d934fc03 ("efi/x86: Handle page faults occurring while running ...")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: "Prakhya, Sai Praneeth" <sai.praneeth.prakhya@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index a25a9fd987a9..529522c62d89 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -724,7 +724,7 @@ void efi_recover_from_page_fault(unsigned long phys_addr)
 	 * Address range 0x0000 - 0x0fff is always mapped in the efi_pgd, so
 	 * page faulting on these addresses isn't expected.
 	 */
-	if (phys_addr >= 0x0000 && phys_addr <= 0x0fff)
+	if (phys_addr <= 0x0fff)
 		return;
 
 	/*
-- 
2.20.1

[PATCH AUTOSEL 5.1 15/39] x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit ea136a112d89bade596314a1ae49f748902f4727 ]

The left shift of unsigned int cpu_khz will overflow for large values of
cpu_khz, so cast it to a long long before shifting it to avoid overvlow.
For example, this can happen when cpu_khz is 4194305, i.e. ~4.2 GHz.

Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 8c3ba8d04924 ("x86, apic: ack all pending irqs when crashed/on kexec")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20190619181446.13635-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/apic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b7bcdd781651..ec6225cb94f9 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1458,7 +1458,8 @@ static void apic_pending_intr_clear(void)
 		if (queued) {
 			if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
 				ntsc = rdtsc();
-				max_loops = (cpu_khz << 10) - (ntsc - tsc);
+				max_loops = (long long)cpu_khz << 10;
+				max_loops -= ntsc - tsc;
 			} else {
 				max_loops--;
 			}
-- 
2.20.1

[PATCH AUTOSEL 5.1 16/39] be2net: fix link failure after ethtool offline test

[Sasha Levin]

From: Petr Oros <poros@redhat.com>

[ Upstream commit 2e5db6eb3c23e5dc8171eb8f6af7a97ef9fcf3a9 ]

Certain cards in conjunction with certain switches need a little more
time for link setup that results in ethtool link test failure after
offline test. Patch adds a loop that waits for a link setup finish.

Changes in v2:
- added fixes header

Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/emulex/benet/be_ethtool.c    | 28 +++++++++++++++----
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 6e635debc7fd..cfa01efa5b48 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -895,7 +895,7 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
 			 u64 *data)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
-	int status;
+	int status, cnt;
 	u8 link_status = 0;
 
 	if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) {
@@ -906,6 +906,9 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
 
 	memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
 
+	/* check link status before offline tests */
+	link_status = netif_carrier_ok(netdev);
+
 	if (test->flags & ETH_TEST_FL_OFFLINE) {
 		if (be_loopback_test(adapter, BE_MAC_LOOPBACK, &data[0]) != 0)
 			test->flags |= ETH_TEST_FL_FAILED;
@@ -926,13 +929,26 @@ static void be_self_test(struct net_device *netdev, struct ethtool_test *test,
 		test->flags |= ETH_TEST_FL_FAILED;
 	}
 
-	status = be_cmd_link_status_query(adapter, NULL, &link_status, 0);
-	if (status) {
-		test->flags |= ETH_TEST_FL_FAILED;
-		data[4] = -1;
-	} else if (!link_status) {
+	/* link status was down prior to test */
+	if (!link_status) {
 		test->flags |= ETH_TEST_FL_FAILED;
 		data[4] = 1;
+		return;
+	}
+
+	for (cnt = 10; cnt; cnt--) {
+		status = be_cmd_link_status_query(adapter, NULL, &link_status,
+						  0);
+		if (status) {
+			test->flags |= ETH_TEST_FL_FAILED;
+			data[4] = -1;
+			break;
+		}
+
+		if (link_status)
+			break;
+
+		msleep_interruptible(500);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 17/39] ppp: mppe: Add softdep to arc4

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit aad1dcc4f011ea409850e040363dff1e59aa4175 ]

The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a
softdep line, so that the corresponding module gets prepared
gracefully.  Without this, a simple inclusion to initrd via dracut
failed due to the missing dependency, for example.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ppp/ppp_mppe.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ppp/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
index 7ccdc62c6052..06d620b10704 100644
--- a/drivers/net/ppp/ppp_mppe.c
+++ b/drivers/net/ppp/ppp_mppe.c
@@ -63,6 +63,7 @@ MODULE_AUTHOR("Frank Cusack <fcusack@fcusack.com>");
 MODULE_DESCRIPTION("Point-to-Point Protocol Microsoft Point-to-Point Encryption support");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS("ppp-compress-" __stringify(CI_MPPE));
+MODULE_SOFTDEP("pre: arc4");
 MODULE_VERSION("1.0.2");
 
 static unsigned int
-- 
2.20.1

[PATCH AUTOSEL 5.1 18/39] net: stmmac: fixed new system time seconds value calculation

[Sasha Levin]

From: Roland Hii <roland.king.guan.hii@intel.com>

[ Upstream commit a1e5388b4d5fc78688e5e9ee6641f779721d6291 ]

When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.

For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD

Previously, the 0x100000000 is mistakenly written as 100000000.

This is further simplified from
  sec = (0x100000000ULL - sec);
to
  sec = -sec;

Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index 8d9cc2157afd..7423262ce590 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -122,7 +122,7 @@ static int adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec,
 		 * programmed with (2^32 – <new_sec_value>)
 		 */
 		if (gmac4)
-			sec = (100000000ULL - sec);
+			sec = -sec;
 
 		value = readl(ioaddr + PTP_TCR);
 		if (value & PTP_TCR_TSCTRLSSR)
-- 
2.20.1

[PATCH AUTOSEL 5.1 19/39] net: stmmac: set IC bit when transmitting frames with HW timestamp

[Sasha Levin]

From: Roland Hii <roland.king.guan.hii@intel.com>

[ Upstream commit d0bb82fd60183868f46c8ccc595a3d61c3334a18 ]

When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the
PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit
hardware timestamp. The polling will most likely timeout if the tx
coalesce is enabled due to the Interrupt-on-Completion (IC) bit is
not set in tx descriptor for those frames.

This patch will ignore the tx coalesce parameter and set the IC bit
when transmitting PTP frames which need to report out the frame
transmit hardware timestamp to user space.

Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 22 ++++++++++++-------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 635d88d82610..a634054dcb11 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2957,12 +2957,15 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Manage tx mitigation */
 	tx_q->tx_count_frames += nfrags + 1;
-	if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
+	if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+	    !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
+	    (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+	    priv->hwts_tx_en)) {
+		stmmac_tx_timer_arm(priv, queue);
+	} else {
+		tx_q->tx_count_frames = 0;
 		stmmac_set_tx_ic(priv, desc);
 		priv->xstats.tx_set_ic_bit++;
-		tx_q->tx_count_frames = 0;
-	} else {
-		stmmac_tx_timer_arm(priv, queue);
 	}
 
 	skb_tx_timestamp(skb);
@@ -3176,12 +3179,15 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * element in case of no SG.
 	 */
 	tx_q->tx_count_frames += nfrags + 1;
-	if (priv->tx_coal_frames <= tx_q->tx_count_frames) {
+	if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
+	    !(priv->synopsys_id >= DWMAC_CORE_4_00 &&
+	    (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+	    priv->hwts_tx_en)) {
+		stmmac_tx_timer_arm(priv, queue);
+	} else {
+		tx_q->tx_count_frames = 0;
 		stmmac_set_tx_ic(priv, desc);
 		priv->xstats.tx_set_ic_bit++;
-		tx_q->tx_count_frames = 0;
-	} else {
-		stmmac_tx_timer_arm(priv, queue);
 	}
 
 	skb_tx_timestamp(skb);
-- 
2.20.1

[PATCH AUTOSEL 5.1 20/39] sis900: fix TX completion

[Sasha Levin]

From: Sergej Benilov <sergej.benilov@googlemail.com>

[ Upstream commit 8ac8a01092b2added0749ef937037bf1912e13e3 ]

Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing",
outbound throughput is dramatically reduced for some connections, as sis900
is doing TX completion within idle states only.

Make TX completion happen after every transmitted packet.

Test:
netperf

before patch:
> netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380 327680 327680    253.44      0.06

after patch:
> netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380 327680 327680    5.38       14.89

Thx to Dave Miller and Eric Dumazet for helpful hints

Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sis/sis900.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 67f9bb6e941b..9b036c857b1d 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -1057,7 +1057,7 @@ sis900_open(struct net_device *net_dev)
 	sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
 
 	/* Enable all known interrupts by setting the interrupt mask. */
-	sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+	sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
 	sw32(cr, RxENA | sr32(cr));
 	sw32(ier, IE);
 
@@ -1578,7 +1578,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
 	sw32(txdp, sis_priv->tx_ring_dma);
 
 	/* Enable all known interrupts by setting the interrupt mask. */
-	sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+	sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
 }
 
 /**
@@ -1618,7 +1618,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 			spin_unlock_irqrestore(&sis_priv->lock, flags);
 			return NETDEV_TX_OK;
 	}
-	sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
+	sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len);
 	sw32(cr, TxENA | sr32(cr));
 
 	sis_priv->cur_tx ++;
@@ -1674,7 +1674,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
 	do {
 		status = sr32(isr);
 
-		if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
+		if ((status & (HIBERR|TxURN|TxERR|TxIDLE|TxDESC|RxORN|RxERR|RxOK)) == 0)
 			/* nothing intresting happened */
 			break;
 		handled = 1;
@@ -1684,7 +1684,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
 			/* Rx interrupt */
 			sis900_rx(net_dev);
 
-		if (status & (TxURN | TxERR | TxIDLE))
+		if (status & (TxURN | TxERR | TxIDLE | TxDESC))
 			/* Tx interrupt */
 			sis900_finish_xmit(net_dev);
 
@@ -1896,8 +1896,8 @@ static void sis900_finish_xmit (struct net_device *net_dev)
 
 		if (tx_status & OWN) {
 			/* The packet is not transmitted yet (owned by hardware) !
-			 * Note: the interrupt is generated only when Tx Machine
-			 * is idle, so this is an almost impossible case */
+			 * Note: this is an almost impossible condition
+			 * in case of TxDESC ('descriptor interrupt') */
 			break;
 		}
 
@@ -2473,7 +2473,7 @@ static int sis900_resume(struct pci_dev *pci_dev)
 	sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
 
 	/* Enable all known interrupts by setting the interrupt mask. */
-	sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+	sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
 	sw32(cr, RxENA | sr32(cr));
 	sw32(ier, IE);
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 21/39] ARM: dts: imx6ul: fix PWM[1-4] interrupts

[Sasha Levin]

From: Sébastien Szymanski <sebastien.szymanski@armadeus.com>

[ Upstream commit 3cf10132ac8d536565f2c02f60a3aeb315863a52 ]

According to the i.MX6UL/L RM, table 3.1 "ARM Cortex A7 domain interrupt
summary", the interrupts for the PWM[1-4] go from 83 to 86.

Fixes: b9901fe84f02 ("ARM: dts: imx6ul: add pwm[1-4] nodes")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index facd65602c2d..572c04296fe1 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -358,7 +358,7 @@
 			pwm1: pwm@2080000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
-				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_PWM1>,
 					 <&clks IMX6UL_CLK_PWM1>;
 				clock-names = "ipg", "per";
@@ -369,7 +369,7 @@
 			pwm2: pwm@2084000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
-				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_PWM2>,
 					 <&clks IMX6UL_CLK_PWM2>;
 				clock-names = "ipg", "per";
@@ -380,7 +380,7 @@
 			pwm3: pwm@2088000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
-				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_PWM3>,
 					 <&clks IMX6UL_CLK_PWM3>;
 				clock-names = "ipg", "per";
@@ -391,7 +391,7 @@
 			pwm4: pwm@208c000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_PWM4>,
 					 <&clks IMX6UL_CLK_PWM4>;
 				clock-names = "ipg", "per";
-- 
2.20.1

[PATCH AUTOSEL 5.1 22/39] qmi_wwan: Fix out-of-bounds read

[Sasha Levin]

From: Bjørn Mork <bjorn@mork.no>

[ Upstream commit 904d88d743b0c94092c5117955eab695df8109e8 ]

The syzbot reported

 Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x67/0x231 mm/kasan/report.c:188
  __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317
  kasan_report+0xe/0x20 mm/kasan/common.c:614
  qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417
  usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
  really_probe+0x281/0x660 drivers/base/dd.c:509
  driver_probe_device+0x104/0x210 drivers/base/dd.c:670
  __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
  bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454

Caused by too many confusing indirections and casts.
id->driver_info is a pointer stored in a long.  We want the
pointer here, not the address of it.

Thanks-to: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Fixes: e4bf63482c30 ("qmi_wwan: Add quirk for Quectel dynamic config")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index d9a6699abe59..e657d8947125 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1412,7 +1412,7 @@ static int qmi_wwan_probe(struct usb_interface *intf,
 	 * different. Ignore the current interface if the number of endpoints
 	 * equals the number for the diag interface (two).
 	 */
-	info = (void *)&id->driver_info;
+	info = (void *)id->driver_info;
 
 	if (info->data & QMI_WWAN_QUIRK_QUECTEL_DYNCFG) {
 		if (desc->bNumEndpoints == 2)
-- 
2.20.1

[PATCH AUTOSEL 5.1 23/39] pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order

[Sasha Levin]

From: Phil Reid <preid@electromag.com.au>

[ Upstream commit 6dbc6e6f58556369bf999cd7d9793586f1b0e4b4 ]

Currently probing of the mcp23s08 results in an error message
"detected irqchip that is shared with multiple gpiochips:
please fix the driver"

This is due to the following:

Call to mcp23s08_irqchip_setup() with call hierarchy:
mcp23s08_irqchip_setup()
  gpiochip_irqchip_add_nested()
    gpiochip_irqchip_add_key()
      gpiochip_set_irq_hooks()

Call to devm_gpiochip_add_data() with call hierarchy:
devm_gpiochip_add_data()
  gpiochip_add_data_with_key()
    gpiochip_add_irqchip()
      gpiochip_set_irq_hooks()

The gpiochip_add_irqchip() returns immediately if there isn't a irqchip
but we added a irqchip due to the previous mcp23s08_irqchip_setup()
call. So it calls gpiochip_set_irq_hooks() a second time.

Fix this by moving the call to devm_gpiochip_add_data before
the call to mcp23s08_irqchip_setup

Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")
Suggested-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-mcp23s08.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 5d7a8514def9..b727de5654cd 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -881,6 +881,10 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 	if (ret < 0)
 		goto fail;
 
+	ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp);
+	if (ret < 0)
+		goto fail;
+
 	mcp->irq_controller =
 		device_property_read_bool(dev, "interrupt-controller");
 	if (mcp->irq && mcp->irq_controller) {
@@ -922,10 +926,6 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 			goto fail;
 	}
 
-	ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp);
-	if (ret < 0)
-		goto fail;
-
 	if (one_regmap_config) {
 		mcp->pinctrl_desc.name = devm_kasprintf(dev, GFP_KERNEL,
 				"mcp23xxx-pinctrl.%d", raw_chip_address);
-- 
2.20.1

[PATCH AUTOSEL 5.1 24/39] pinctrl: ocelot: fix gpio direction for pins after 31

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit f2818ba3a0125670cb9999bb5a65ebb631a8da2f ]

The third argument passed to REG is not the correct one and
ocelot_gpio_set_direction is not working for pins after 31. Fix that by
passing the pin number instead of the modulo 32 value.

Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-ocelot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index 3b4ca52d2456..d2478db975bd 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -432,7 +432,7 @@ static int ocelot_gpio_set_direction(struct pinctrl_dev *pctldev,
 	struct ocelot_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
 	unsigned int p = pin % 32;
 
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_OE, info, p), BIT(p),
+	regmap_update_bits(info->map, REG(OCELOT_GPIO_OE, info, pin), BIT(p),
 			   input ? 0 : BIT(p));
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.1 25/39] pinctrl: ocelot: fix pinmuxing for pins after 31

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 4b36082e2e09c2769710756390d54cfca563ed96 ]

The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins
is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0],
OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to
facilitate the register offset calculation and use it where necessary.

Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-ocelot.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index d2478db975bd..fb76fb2e9ea5 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -396,7 +396,7 @@ static int ocelot_pin_function_idx(struct ocelot_pinctrl *info,
 	return -1;
 }
 
-#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))
+#define REG_ALT(msb, info, p) (OCELOT_GPIO_ALT0 * (info)->stride + 4 * ((msb) + ((info)->stride * ((p) / 32))))
 
 static int ocelot_pinmux_set_mux(struct pinctrl_dev *pctldev,
 				 unsigned int selector, unsigned int group)
@@ -412,19 +412,21 @@ static int ocelot_pinmux_set_mux(struct pinctrl_dev *pctldev,
 
 	/*
 	 * f is encoded on two bits.
-	 * bit 0 of f goes in BIT(pin) of ALT0, bit 1 of f goes in BIT(pin) of
-	 * ALT1
+	 * bit 0 of f goes in BIT(pin) of ALT[0], bit 1 of f goes in BIT(pin) of
+	 * ALT[1]
 	 * This is racy because both registers can't be updated at the same time
 	 * but it doesn't matter much for now.
 	 */
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT0, info, pin->pin),
+	regmap_update_bits(info->map, REG_ALT(0, info, pin->pin),
 			   BIT(p), f << p);
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT1, info, pin->pin),
+	regmap_update_bits(info->map, REG_ALT(1, info, pin->pin),
 			   BIT(p), f << (p - 1));
 
 	return 0;
 }
 
+#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))
+
 static int ocelot_gpio_set_direction(struct pinctrl_dev *pctldev,
 				     struct pinctrl_gpio_range *range,
 				     unsigned int pin, bool input)
@@ -445,9 +447,9 @@ static int ocelot_gpio_request_enable(struct pinctrl_dev *pctldev,
 	struct ocelot_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
 	unsigned int p = offset % 32;
 
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT0, info, offset),
+	regmap_update_bits(info->map, REG_ALT(0, info, offset),
 			   BIT(p), 0);
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT1, info, offset),
+	regmap_update_bits(info->map, REG_ALT(1, info, offset),
 			   BIT(p), 0);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.1 26/39] dm table: don't copy from a NULL pointer in realloc_argv()

[Sasha Levin]

From: Jerome Marchand <jmarchan@redhat.com>

[ Upstream commit a0651926553cfe7992166432e418987760882652 ]

For the first call to realloc_argv() in dm_split_args(), old_argv is
NULL and size is zero. Then memcpy is called, with the NULL old_argv
as the source argument and a zero size argument. AFAIK, this is
undefined behavior and generates the following warning when compiled
with UBSAN on ppc64le:

In file included from ./arch/powerpc/include/asm/paca.h:19,
                 from ./arch/powerpc/include/asm/current.h:16,
                 from ./include/linux/sched.h:12,
                 from ./include/linux/kthread.h:6,
                 from drivers/md/dm-core.h:12,
                 from drivers/md/dm-table.c:8:
In function 'memcpy',
    inlined from 'realloc_argv' at drivers/md/dm-table.c:565:3,
    inlined from 'dm_split_args' at drivers/md/dm-table.c:588:9:
./include/linux/string.h:345:9: error: argument 2 null where non-null expected [-Werror=nonnull]
  return __builtin_memcpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/dm-table.c: In function 'dm_split_args':
./include/linux/string.h:345:9: note: in a call to built-in function '__builtin_memcpy'

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-table.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 350cf0451456..ec8b27e20de3 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -561,7 +561,7 @@ static char **realloc_argv(unsigned *size, char **old_argv)
 		gfp = GFP_NOIO;
 	}
 	argv = kmalloc_array(new_size, sizeof(*argv), gfp);
-	if (argv) {
+	if (argv && old_argv) {
 		memcpy(argv, old_argv, *size * sizeof(*argv));
 		*size = new_size;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.1 27/39] dm verity: use message limit for data block corruption message

[Sasha Levin]

From: Milan Broz <gmazyland@gmail.com>

[ Upstream commit 2eba4e640b2c4161e31ae20090a53ee02a518657 ]

DM verity should also use DMERR_LIMIT to limit repeat data block
corruption messages.

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-verity-target.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c
index f4c31ffaa88e..cec1c0ff33eb 100644
--- a/drivers/md/dm-verity-target.c
+++ b/drivers/md/dm-verity-target.c
@@ -236,8 +236,8 @@ static int verity_handle_err(struct dm_verity *v, enum verity_block_type type,
 		BUG();
 	}
 
-	DMERR("%s: %s block %llu is corrupted", v->data_dev->name, type_str,
-		block);
+	DMERR_LIMIT("%s: %s block %llu is corrupted", v->data_dev->name,
+		    type_str, block);
 
 	if (v->corrupted_errs == DM_VERITY_MAX_CORRUPTED_ERRS)
 		DMERR("%s: reached maximum errors", v->data_dev->name);
-- 
2.20.1

[PATCH AUTOSEL 5.1 28/39] x86/boot/64: Fix crash if kernel image crosses page table boundary

[Sasha Levin]

From: "Kirill A. Shutemov" <kirill@shutemov.name>

[ Upstream commit 81c7ed296dcd02bc0b4488246d040e03e633737a ]

A kernel which boots in 5-level paging mode crashes in a small percentage
of cases if KASLR is enabled.

This issue was tracked down to the case when the kernel image unpacks in a
way that it crosses an 1G boundary. The crash is caused by an overrun of
the PMD page table in __startup_64() and corruption of P4D page table
allocated next to it. This particular issue is not visible with 4-level
paging as P4D page tables are not used.

But the P4D and the PUD calculation have similar problems.

The PMD index calculation is wrong due to operator precedence, which fails
to confine the PMDs in the PMD array on wrap around.

The P4D calculation for 5-level paging and the PUD calculation calculate
the first index correctly, but then blindly increment it which causes the
same issue when a kernel image is located across a 512G and for 5-level
paging across a 46T boundary.

This wrap around mishandling was introduced when these parts moved from
assembly to C.

Restore it to the correct behaviour.

Fixes: c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190620112345.28833-1-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/head64.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 16b1cbd3a61e..7df5bce4e1be 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -190,18 +190,18 @@ unsigned long __head __startup_64(unsigned long physaddr,
 		pgd[i + 0] = (pgdval_t)p4d + pgtable_flags;
 		pgd[i + 1] = (pgdval_t)p4d + pgtable_flags;
 
-		i = (physaddr >> P4D_SHIFT) % PTRS_PER_P4D;
-		p4d[i + 0] = (pgdval_t)pud + pgtable_flags;
-		p4d[i + 1] = (pgdval_t)pud + pgtable_flags;
+		i = physaddr >> P4D_SHIFT;
+		p4d[(i + 0) % PTRS_PER_P4D] = (pgdval_t)pud + pgtable_flags;
+		p4d[(i + 1) % PTRS_PER_P4D] = (pgdval_t)pud + pgtable_flags;
 	} else {
 		i = (physaddr >> PGDIR_SHIFT) % PTRS_PER_PGD;
 		pgd[i + 0] = (pgdval_t)pud + pgtable_flags;
 		pgd[i + 1] = (pgdval_t)pud + pgtable_flags;
 	}
 
-	i = (physaddr >> PUD_SHIFT) % PTRS_PER_PUD;
-	pud[i + 0] = (pudval_t)pmd + pgtable_flags;
-	pud[i + 1] = (pudval_t)pmd + pgtable_flags;
+	i = physaddr >> PUD_SHIFT;
+	pud[(i + 0) % PTRS_PER_PUD] = (pudval_t)pmd + pgtable_flags;
+	pud[(i + 1) % PTRS_PER_PUD] = (pudval_t)pmd + pgtable_flags;
 
 	pmd_entry = __PAGE_KERNEL_LARGE_EXEC & ~_PAGE_GLOBAL;
 	/* Filter out unsupported __PAGE_KERNEL_* bits: */
@@ -211,8 +211,9 @@ unsigned long __head __startup_64(unsigned long physaddr,
 	pmd_entry +=  physaddr;
 
 	for (i = 0; i < DIV_ROUND_UP(_end - _text, PMD_SIZE); i++) {
-		int idx = i + (physaddr >> PMD_SHIFT) % PTRS_PER_PMD;
-		pmd[idx] = pmd_entry + i * PMD_SIZE;
+		int idx = i + (physaddr >> PMD_SHIFT);
+
+		pmd[idx % PTRS_PER_PMD] = pmd_entry + i * PMD_SIZE;
 	}
 
 	/*
-- 
2.20.1

[PATCH AUTOSEL 5.1 29/39] x86/boot/64: Add missing fixup_pointer() for next_early_pgt access

[Sasha Levin]

From: "Kirill A. Shutemov" <kirill@shutemov.name>

[ Upstream commit c1887159eb48ba40e775584cfb2a443962cf1a05 ]

__startup_64() uses fixup_pointer() to access global variables in a
position-independent fashion. Access to next_early_pgt was wrapped into the
helper, but one instance in the 5-level paging branch was missed.

GCC generates a R_X86_64_PC32 PC-relative relocation for the access which
doesn't trigger the issue, but Clang emmits a R_X86_64_32S which leads to
an invalid memory access and system reboot.

Fixes: 187e91fe5e91 ("x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt'")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Potapenko <glider@google.com>
Link: https://lkml.kernel.org/r/20190620112422.29264-1-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/head64.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 7df5bce4e1be..29ffa495bd1c 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -184,7 +184,8 @@ unsigned long __head __startup_64(unsigned long physaddr,
 	pgtable_flags = _KERNPG_TABLE_NOENC + sme_get_me_mask();
 
 	if (la57) {
-		p4d = fixup_pointer(early_dynamic_pgts[next_early_pgt++], physaddr);
+		p4d = fixup_pointer(early_dynamic_pgts[(*next_pgt_ptr)++],
+				    physaddr);
 
 		i = (physaddr >> PGDIR_SHIFT) % PTRS_PER_PGD;
 		pgd[i + 0] = (pgdval_t)p4d + pgtable_flags;
-- 
2.20.1

[PATCH AUTOSEL 5.1 30/39] HID: chicony: add another quirk for PixArt mouse

[Sasha Levin]

From: Oleksandr Natalenko <oleksandr@redhat.com>

[ Upstream commit dcf768b0ac868630e7bdb6f2f1c9fe72788012fa ]

I've spotted another Chicony PixArt mouse in the wild, which requires
HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute.

USB ID of this device is 0x04f2:0x0939.

We've introduced quirks like this for other models before, so lets add
this mouse too.

Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linux
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h    | 1 +
 drivers/hid/hid-quirks.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index adce58f24f76..b5615ffa74ba 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -272,6 +272,7 @@
 #define USB_DEVICE_ID_CHICONY_MULTI_TOUCH	0xb19d
 #define USB_DEVICE_ID_CHICONY_WIRELESS	0x0618
 #define USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE	0x1053
+#define USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE2	0x0939
 #define USB_DEVICE_ID_CHICONY_WIRELESS2	0x1123
 #define USB_DEVICE_ID_ASUS_AK1D		0x1125
 #define USB_DEVICE_ID_CHICONY_TOSHIBA_WT10A	0x1408
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 77ffba48cc73..c586e9f8da3e 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -45,6 +45,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE2), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD), HID_QUIRK_BADPAD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK), HID_QUIRK_NOGET },
-- 
2.20.1

[PATCH AUTOSEL 5.1 31/39] HID: uclogic: Add support for Huion HS64 tablet

[Sasha Levin]

From: Kyle Godbey <me@kyle.ee>

[ Upstream commit 315ffcc9a1e054bb460f9203058b52dc26b1173d ]

Add support for Huion HS64 drawing tablet to hid-uclogic

Signed-off-by: Kyle Godbey <me@kyle.ee>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h            | 1 +
 drivers/hid/hid-uclogic-core.c   | 2 ++
 drivers/hid/hid-uclogic-params.c | 2 ++
 3 files changed, 5 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b5615ffa74ba..4ea272eb34c8 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -572,6 +572,7 @@
 
 #define USB_VENDOR_ID_HUION		0x256c
 #define USB_DEVICE_ID_HUION_TABLET	0x006e
+#define USB_DEVICE_ID_HUION_HS64	0x006d
 
 #define USB_VENDOR_ID_IBM					0x04b3
 #define USB_DEVICE_ID_IBM_SCROLLPOINT_III			0x3100
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index 8fe02d81265d..914fb527ae7a 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -369,6 +369,8 @@ static const struct hid_device_id uclogic_devices[] = {
 				USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HUION,
 				USB_DEVICE_ID_HUION_TABLET) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HUION,
+				USB_DEVICE_ID_HUION_HS64) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
 				USB_DEVICE_ID_HUION_TABLET) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 0187c9f8fc22..273d784fff66 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -977,6 +977,8 @@ int uclogic_params_init(struct uclogic_params *params,
 		/* FALL THROUGH */
 	case VID_PID(USB_VENDOR_ID_HUION,
 		     USB_DEVICE_ID_HUION_TABLET):
+	case VID_PID(USB_VENDOR_ID_HUION,
+		     USB_DEVICE_ID_HUION_HS64):
 	case VID_PID(USB_VENDOR_ID_UCLOGIC,
 		     USB_DEVICE_ID_HUION_TABLET):
 	case VID_PID(USB_VENDOR_ID_UCLOGIC,
-- 
2.20.1

[PATCH AUTOSEL 5.1 32/39] HID: multitouch: Add pointstick support for ALPS Touchpad

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 0a95fc733da375de0688d0f1fd3a2869a1c1d499 ]

There's a new ALPS touchpad/pointstick combo device that requires
MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse.

The device can be found on HP ZBook 17 G5.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h        | 1 +
 drivers/hid/hid-multitouch.c | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4ea272eb34c8..cd7442eb25b9 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -83,6 +83,7 @@
 #define HID_DEVICE_ID_ALPS_U1_DUAL_3BTN_PTP	0x1220
 #define HID_DEVICE_ID_ALPS_U1		0x1215
 #define HID_DEVICE_ID_ALPS_T4_BTNLESS	0x120C
+#define HID_DEVICE_ID_ALPS_1222		0x1222
 
 
 #define USB_VENDOR_ID_AMI		0x046b
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 1565a307170a..42bb635895cf 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1780,6 +1780,10 @@ static const struct hid_device_id mt_devices[] = {
 		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_ALPS_JP,
 			HID_DEVICE_ID_ALPS_U1_DUAL_3BTN_PTP) },
+	{ .driver_data = MT_CLS_WIN_8_DUAL,
+		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
+			USB_VENDOR_ID_ALPS_JP,
+			HID_DEVICE_ID_ALPS_1222) },
 
 	/* Lenovo X1 TAB Gen 2 */
 	{ .driver_data = MT_CLS_WIN_8_DUAL,
-- 
2.20.1

[PATCH AUTOSEL 5.1 33/39] pinctrl: mediatek: Ignore interrupts that are wake only during resume

[Sasha Levin]

From: Nicolas Boichat <drinkcat@chromium.org>

[ Upstream commit 35594bc7cecf3a78504b590e350570e8f4d7779e ]

Before suspending, mtk-eint would set the interrupt mask to the
one in wake_mask. However, some of these interrupts may not have a
corresponding interrupt handler, or the interrupt may be disabled.

On resume, the eint irq handler would trigger nevertheless,
and irq/pm.c:irq_pm_check_wakeup would be called, which would
try to call irq_disable. However, if the interrupt is not enabled
(irqd_irq_disabled(&desc->irq_data) is true), the call does nothing,
and the interrupt is left enabled in the eint driver.

Especially for level-sensitive interrupts, this will lead to an
interrupt storm on resume.

If we detect that an interrupt is only in wake_mask, but not in
cur_mask, we can just mask it out immediately (as mtk_eint_resume
would do anyway at a later stage in the resume sequence, when
restoring cur_mask).

Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/mtk-eint.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c
index f464f8cd274b..737385e86beb 100644
--- a/drivers/pinctrl/mediatek/mtk-eint.c
+++ b/drivers/pinctrl/mediatek/mtk-eint.c
@@ -318,7 +318,7 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct mtk_eint *eint = irq_desc_get_handler_data(desc);
 	unsigned int status, eint_num;
-	int offset, index, virq;
+	int offset, mask_offset, index, virq;
 	void __iomem *reg =  mtk_eint_get_offset(eint, 0, eint->regs->stat);
 	int dual_edge, start_level, curr_level;
 
@@ -328,10 +328,24 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
 		status = readl(reg);
 		while (status) {
 			offset = __ffs(status);
+			mask_offset = eint_num >> 5;
 			index = eint_num + offset;
 			virq = irq_find_mapping(eint->domain, index);
 			status &= ~BIT(offset);
 
+			/*
+			 * If we get an interrupt on pin that was only required
+			 * for wake (but no real interrupt requested), mask the
+			 * interrupt (as would mtk_eint_resume do anyway later
+			 * in the resume sequence).
+			 */
+			if (eint->wake_mask[mask_offset] & BIT(offset) &&
+			    !(eint->cur_mask[mask_offset] & BIT(offset))) {
+				writel_relaxed(BIT(offset), reg -
+					eint->regs->stat +
+					eint->regs->mask_set);
+			}
+
 			dual_edge = eint->dual_edge[index];
 			if (dual_edge) {
 				/*
-- 
2.20.1

[PATCH AUTOSEL 5.1 34/39] net: aquantia: fix vlans not working over bridged network

[Sasha Levin]

From: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>

[ Upstream commit 48dd73d08d4dda47ee31cc8611fb16840fc16803 ]

In configuration of vlan over bridge over aquantia device
it was found that vlan tagged traffic is dropped on chip.

The reason is that bridge device enables promisc mode,
but in atlantic chip vlan filters will still apply.
So we have to corellate promisc settings with vlan configuration.

The solution is to track in a separate state variable the
need of vlan forced promisc. And also consider generic
promisc configuration when doing vlan filter config.

Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/aquantia/atlantic/aq_filters.c   | 10 ++++++++--
 .../net/ethernet/aquantia/atlantic/aq_nic.c   |  1 +
 .../net/ethernet/aquantia/atlantic/aq_nic.h   |  1 +
 .../aquantia/atlantic/hw_atl/hw_atl_b0.c      | 19 +++++++++++++------
 4 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c
index 18bc035da850..1fff462a4175 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_filters.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_filters.c
@@ -843,9 +843,14 @@ int aq_filters_vlans_update(struct aq_nic_s *aq_nic)
 		return err;
 
 	if (aq_nic->ndev->features & NETIF_F_HW_VLAN_CTAG_FILTER) {
-		if (hweight < AQ_VLAN_MAX_FILTERS)
-			err = aq_hw_ops->hw_filter_vlan_ctrl(aq_hw, true);
+		if (hweight < AQ_VLAN_MAX_FILTERS && hweight > 0) {
+			err = aq_hw_ops->hw_filter_vlan_ctrl(aq_hw,
+				!(aq_nic->packet_filter & IFF_PROMISC));
+			aq_nic->aq_nic_cfg.is_vlan_force_promisc = false;
+		} else {
 		/* otherwise left in promiscue mode */
+			aq_nic->aq_nic_cfg.is_vlan_force_promisc = true;
+		}
 	}
 
 	return err;
@@ -866,6 +871,7 @@ int aq_filters_vlan_offload_off(struct aq_nic_s *aq_nic)
 	if (unlikely(!aq_hw_ops->hw_filter_vlan_ctrl))
 		return -EOPNOTSUPP;
 
+	aq_nic->aq_nic_cfg.is_vlan_force_promisc = true;
 	err = aq_hw_ops->hw_filter_vlan_ctrl(aq_hw, false);
 	if (err)
 		return err;
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index ff83667410bd..550abfe6973d 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -117,6 +117,7 @@ void aq_nic_cfg_start(struct aq_nic_s *self)
 
 	cfg->link_speed_msk &= cfg->aq_hw_caps->link_speed_msk;
 	cfg->features = cfg->aq_hw_caps->hw_features;
+	cfg->is_vlan_force_promisc = true;
 }
 
 static int aq_nic_update_link_status(struct aq_nic_s *self)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
index 8e34c1e49bf2..65e681be9b5d 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h
@@ -36,6 +36,7 @@ struct aq_nic_cfg_s {
 	u32 flow_control;
 	u32 link_speed_msk;
 	u32 wol;
+	bool is_vlan_force_promisc;
 	u16 is_mc_list_enabled;
 	u16 mc_list_count;
 	bool is_autoneg;
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index ec302fdfec63..a4cc04741115 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -771,8 +771,15 @@ static int hw_atl_b0_hw_packet_filter_set(struct aq_hw_s *self,
 					  unsigned int packet_filter)
 {
 	unsigned int i = 0U;
+	struct aq_nic_cfg_s *cfg = self->aq_nic_cfg;
+
+	hw_atl_rpfl2promiscuous_mode_en_set(self,
+					    IS_FILTER_ENABLED(IFF_PROMISC));
+
+	hw_atl_rpf_vlan_prom_mode_en_set(self,
+				     IS_FILTER_ENABLED(IFF_PROMISC) ||
+				     cfg->is_vlan_force_promisc);
 
-	hw_atl_rpfl2promiscuous_mode_en_set(self, IS_FILTER_ENABLED(IFF_PROMISC));
 	hw_atl_rpfl2multicast_flr_en_set(self,
 					 IS_FILTER_ENABLED(IFF_ALLMULTI), 0);
 
@@ -781,13 +788,13 @@ static int hw_atl_b0_hw_packet_filter_set(struct aq_hw_s *self,
 
 	hw_atl_rpfl2broadcast_en_set(self, IS_FILTER_ENABLED(IFF_BROADCAST));
 
-	self->aq_nic_cfg->is_mc_list_enabled = IS_FILTER_ENABLED(IFF_MULTICAST);
+	cfg->is_mc_list_enabled = IS_FILTER_ENABLED(IFF_MULTICAST);
 
 	for (i = HW_ATL_B0_MAC_MIN; i < HW_ATL_B0_MAC_MAX; ++i)
 		hw_atl_rpfl2_uc_flr_en_set(self,
-					   (self->aq_nic_cfg->is_mc_list_enabled &&
-				    (i <= self->aq_nic_cfg->mc_list_count)) ?
-				    1U : 0U, i);
+					   (cfg->is_mc_list_enabled &&
+					    (i <= cfg->mc_list_count)) ?
+					   1U : 0U, i);
 
 	return aq_hw_err_from_flags(self);
 }
@@ -1079,7 +1086,7 @@ static int hw_atl_b0_hw_vlan_set(struct aq_hw_s *self,
 static int hw_atl_b0_hw_vlan_ctrl(struct aq_hw_s *self, bool enable)
 {
 	/* set promisc in case of disabing the vland filter */
-	hw_atl_rpf_vlan_prom_mode_en_set(self, !!!enable);
+	hw_atl_rpf_vlan_prom_mode_en_set(self, !enable);
 
 	return aq_hw_err_from_flags(self);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.1 35/39] cpu/hotplug: Fix out-of-bounds read when setting fail state

[Sasha Levin]

From: Eiichi Tsukata <devel@etsukata.com>

[ Upstream commit 33d4a5a7a5b4d02915d765064b2319e90a11cbde ]

Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail
can control `struct cpuhp_step *sp` address, results in the following
global-out-of-bounds read.

Reproducer:

  # echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail

KASAN report:

  BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0
  Read of size 8 at addr ffffffff89734438 by task bash/1941

  CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ #31
  Call Trace:
   write_cpuhp_fail+0x2cd/0x2e0
   dev_attr_store+0x58/0x80
   sysfs_kf_write+0x13d/0x1a0
   kernfs_fop_write+0x2bc/0x460
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f05e4f4c970

  The buggy address belongs to the variable:
   cpu_hotplug_lock+0x98/0xa0

  Memory state around the buggy address:
   ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
   ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
  >ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
                                          ^
   ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Add a sanity check for the value written from user space.

Fixes: 1db49484f21ed ("smp/hotplug: Hotplug state fail injection")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Link: https://lkml.kernel.org/r/20190627024732.31672-1-devel@etsukata.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cpu.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/cpu.c b/kernel/cpu.c
index 9cc8b6fdb2dc..6e95c9bafba6 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -1954,6 +1954,9 @@ static ssize_t write_cpuhp_fail(struct device *dev,
 	if (ret)
 		return ret;
 
+	if (fail < CPUHP_OFFLINE || fail > CPUHP_ONLINE)
+		return -EINVAL;
+
 	/*
 	 * Cannot fail STARTING/DYING callbacks.
 	 */
-- 
2.20.1

[PATCH AUTOSEL 5.1 36/39] pinctrl: mediatek: Update cur_mask in mask/mask ops

[Sasha Levin]

From: Nicolas Boichat <drinkcat@chromium.org>

[ Upstream commit 9d957a959bc8c3dfe37572ac8e99affb5a885965 ]

During suspend/resume, mtk_eint_mask may be called while
wake_mask is active. For example, this happens if a wake-source
with an active interrupt handler wakes the system:
irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so
that it can be handled later on in the resume flow.

However, this may happen before mtk_eint_do_resume is called:
in this case, wake_mask is loaded, and cur_mask is restored
from an older copy, re-enabling the interrupt, and causing
an interrupt storm (especially for level interrupts).

Step by step, for a line that has both wake and interrupt enabled:
 1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt
    enabled at hardware level)
 2. System suspends, resumes due to that line (at this stage EINT_EN
    == wake_mask)
 3. irq_pm_check_wakeup is called, and disables the interrupt =>
    EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1
 4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so
    it reenables EINT_EN[irq] = 1 => interrupt storm as the driver
    is not yet ready to handle the interrupt.

This patch fixes the issue in step 3, by recording all mask/unmask
changes in cur_mask. This also avoids the need to read the current
mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask
function.

The interrupt will be re-enabled properly later on, sometimes after
mtk_eint_do_resume, when the driver is ready to handle it.

Fixes: 58a5e1b64bb0 ("pinctrl: mediatek: Implement wake handler and suspend resume")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/mtk-eint.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c
index 737385e86beb..7e526bcf5e0b 100644
--- a/drivers/pinctrl/mediatek/mtk-eint.c
+++ b/drivers/pinctrl/mediatek/mtk-eint.c
@@ -113,6 +113,8 @@ static void mtk_eint_mask(struct irq_data *d)
 	void __iomem *reg = mtk_eint_get_offset(eint, d->hwirq,
 						eint->regs->mask_set);
 
+	eint->cur_mask[d->hwirq >> 5] &= ~mask;
+
 	writel(mask, reg);
 }
 
@@ -123,6 +125,8 @@ static void mtk_eint_unmask(struct irq_data *d)
 	void __iomem *reg = mtk_eint_get_offset(eint, d->hwirq,
 						eint->regs->mask_clr);
 
+	eint->cur_mask[d->hwirq >> 5] |= mask;
+
 	writel(mask, reg);
 
 	if (eint->dual_edge[d->hwirq])
@@ -217,19 +221,6 @@ static void mtk_eint_chip_write_mask(const struct mtk_eint *eint,
 	}
 }
 
-static void mtk_eint_chip_read_mask(const struct mtk_eint *eint,
-				    void __iomem *base, u32 *buf)
-{
-	int port;
-	void __iomem *reg;
-
-	for (port = 0; port < eint->hw->ports; port++) {
-		reg = base + eint->regs->mask + (port << 2);
-		buf[port] = ~readl_relaxed(reg);
-		/* Mask is 0 when irq is enabled, and 1 when disabled. */
-	}
-}
-
 static int mtk_eint_irq_request_resources(struct irq_data *d)
 {
 	struct mtk_eint *eint = irq_data_get_irq_chip_data(d);
@@ -384,7 +375,6 @@ static void mtk_eint_irq_handler(struct irq_desc *desc)
 
 int mtk_eint_do_suspend(struct mtk_eint *eint)
 {
-	mtk_eint_chip_read_mask(eint, eint->base, eint->cur_mask);
 	mtk_eint_chip_write_mask(eint, eint->base, eint->wake_mask);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.1 37/39] mm/oom_kill.c: fix uninitialized oc->constraint

[Sasha Levin]

From: Yafang Shao <laoar.shao@gmail.com>

[ Upstream commit 432b1de0de02a83f64695e69a2d83cbee10c236f ]

In dump_oom_summary() oc->constraint is used to show oom_constraint_text,
but it hasn't been set before.  So the value of it is always the default
value 0.  We should inititialize it before.

Bellow is the output when memcg oom occurs,

before this patch:
  oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=7997,uid=0

after this patch:
  oom-kill:constraint=CONSTRAINT_MEMCG,nodemask=(null), cpuset=/,mems_allowed=0,oom_memcg=/foo,task_memcg=/foo,task=bash,pid=13681,uid=0

Link: http://lkml.kernel.org/r/1560522038-15879-1-git-send-email-laoar.shao@gmail.com
Fixes: ef8444ea01d7 ("mm, oom: reorganize the oom report in dump_header")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wind Yu <yuzhoujian@didichuxing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/oom_kill.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 3a2484884cfd..263efad6fc7e 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -985,8 +985,7 @@ static void oom_kill_process(struct oom_control *oc, const char *message)
 /*
  * Determines whether the kernel must panic because of the panic_on_oom sysctl.
  */
-static void check_panic_on_oom(struct oom_control *oc,
-			       enum oom_constraint constraint)
+static void check_panic_on_oom(struct oom_control *oc)
 {
 	if (likely(!sysctl_panic_on_oom))
 		return;
@@ -996,7 +995,7 @@ static void check_panic_on_oom(struct oom_control *oc,
 		 * does not panic for cpuset, mempolicy, or memcg allocation
 		 * failures.
 		 */
-		if (constraint != CONSTRAINT_NONE)
+		if (oc->constraint != CONSTRAINT_NONE)
 			return;
 	}
 	/* Do not panic for oom kills triggered by sysrq */
@@ -1033,7 +1032,6 @@ EXPORT_SYMBOL_GPL(unregister_oom_notifier);
 bool out_of_memory(struct oom_control *oc)
 {
 	unsigned long freed = 0;
-	enum oom_constraint constraint = CONSTRAINT_NONE;
 
 	if (oom_killer_disabled)
 		return false;
@@ -1069,10 +1067,10 @@ bool out_of_memory(struct oom_control *oc)
 	 * Check if there were limitations on the allocation (only relevant for
 	 * NUMA and memcg) that may require different handling.
 	 */
-	constraint = constrained_alloc(oc);
-	if (constraint != CONSTRAINT_MEMORY_POLICY)
+	oc->constraint = constrained_alloc(oc);
+	if (oc->constraint != CONSTRAINT_MEMORY_POLICY)
 		oc->nodemask = NULL;
-	check_panic_on_oom(oc, constraint);
+	check_panic_on_oom(oc);
 
 	if (!is_memcg_oom(oc) && sysctl_oom_kill_allocating_task &&
 	    current->mm && !oom_unkillable_task(current, NULL, oc->nodemask) &&
-- 
2.20.1

[PATCH AUTOSEL 5.1 38/39] fork,memcg: alloc_thread_stack_node needs to set tsk->stack

[Sasha Levin]

From: Andrea Arcangeli <aarcange@redhat.com>

[ Upstream commit 1bf4580e00a248a2c86269125390eb3648e1877c ]

Commit 5eed6f1dff87 ("fork,memcg: fix crash in free_thread_stack on
memcg charge fail") corrected two instances, but there was a third
instance of this bug.

Without setting tsk->stack, if memcg_charge_kernel_stack fails, it'll
execute free_thread_stack() on a dangling pointer.

Enterprise kernels are compiled with VMAP_STACK=y so this isn't
critical, but custom VMAP_STACK=n builds should have some performance
advantage, with the drawback of risking to fail fork because compaction
didn't succeed.  So as long as VMAP_STACK=n is a supported option it's
worth fixing it upstream.

Link: http://lkml.kernel.org/r/20190619011450.28048-1-aarcange@redhat.com
Fixes: 9b6f7e163cd0 ("mm: rework memcg kernel stack accounting")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/fork.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/kernel/fork.c b/kernel/fork.c
index 2628f3773ca8..ee24fea0eede 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -245,7 +245,11 @@ static unsigned long *alloc_thread_stack_node(struct task_struct *tsk, int node)
 	struct page *page = alloc_pages_node(node, THREADINFO_GFP,
 					     THREAD_SIZE_ORDER);
 
-	return page ? page_address(page) : NULL;
+	if (likely(page)) {
+		tsk->stack = page_address(page);
+		return tsk->stack;
+	}
+	return NULL;
 #endif
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 39/39] linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 8f9fab480c7a87b10bb5440b5555f370272a5d59 ]

DIV_ROUND_UP_ULL adds the two arguments and then invokes
DIV_ROUND_DOWN_ULL.  But on a 32bit system the addition of two 32 bit
values can overflow.  DIV_ROUND_DOWN_ULL does it correctly and stashes
the addition into a unsigned long long so cast the result to unsigned
long long here to avoid the overflow condition.

[akpm@linux-foundation.org: DIV_ROUND_UP_ULL must be an rval]
Link: http://lkml.kernel.org/r/20190625100518.30753-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/kernel.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 2d14e21c16c0..4330cecd2237 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -92,7 +92,8 @@
 #define DIV_ROUND_DOWN_ULL(ll, d) \
 	({ unsigned long long _tmp = (ll); do_div(_tmp, d); _tmp; })
 
-#define DIV_ROUND_UP_ULL(ll, d)		DIV_ROUND_DOWN_ULL((ll) + (d) - 1, (d))
+#define DIV_ROUND_UP_ULL(ll, d) \
+	DIV_ROUND_DOWN_ULL((unsigned long long)(ll) + (d) - 1, (d))
 
 #if BITS_PER_LONG == 32
 # define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP_ULL(ll, d)
-- 
2.20.1

RE: [PATCH AUTOSEL 5.1 08/39] arm64: dts: ls1028a: Fix CPU idle fail.

[Ran Wang]

Hi Sasha, 

    Thanks for helping port this patch to stable.
    May I know if I can submit other bug fixes which has been accepted by upstream to stable by myself?
    If yes, where I can find related process for reference?

Thanks & Regards,
Ran

> -----Original Message-----
> From: Sasha Levin <sashal@kernel.org>
> Sent: Wednesday, July 03, 2019 10:15
> To: linux-kernel@vger.kernel.org; stable@vger.kernel.org
> Cc: Ran Wang <ran.wang_1@nxp.com>; Shawn Guo <shawnguo@kernel.org>;
> Sasha Levin <sashal@kernel.org>; devicetree@vger.kernel.org
> Subject: [PATCH AUTOSEL 5.1 08/39] arm64: dts: ls1028a: Fix CPU idle fail.
> 
> From: Ran Wang <ran.wang_1@nxp.com>
> 
> [ Upstream commit 53f2ac9d3aa881ed419054076042898b77c27ee4 ]
> 
> PSCI spec define 1st parameter's bit 16 of function CPU_SUSPEND to indicate
> CPU State Type: 0 for standby, 1 for power down. In this case, we want to select
> standby for CPU idle feature. But current setting wrongly select power down and
> cause CPU SUSPEND fail every time. Need this fix.
> 
> Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 2896bbcfa3bb..228872549f01 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -28,7 +28,7 @@
>  			enable-method = "psci";
>  			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&l2>;
> -			cpu-idle-states = <&CPU_PH20>;
> +			cpu-idle-states = <&CPU_PW20>;
>  		};
> 
>  		cpu1: cpu@1 {
> @@ -38,7 +38,7 @@
>  			enable-method = "psci";
>  			clocks = <&clockgen 1 0>;
>  			next-level-cache = <&l2>;
> -			cpu-idle-states = <&CPU_PH20>;
> +			cpu-idle-states = <&CPU_PW20>;
>  		};
> 
>  		l2: l2-cache {
> @@ -53,13 +53,13 @@
>  		 */
>  		entry-method = "arm,psci";
> 
> -		CPU_PH20: cpu-ph20 {
> -			compatible = "arm,idle-state";
> -			idle-state-name = "PH20";
> -			arm,psci-suspend-param = <0x00010000>;
> -			entry-latency-us = <1000>;
> -			exit-latency-us = <1000>;
> -			min-residency-us = <3000>;
> +		CPU_PW20: cpu-pw20 {
> +			  compatible = "arm,idle-state";
> +			  idle-state-name = "PW20";
> +			  arm,psci-suspend-param = <0x0>;
> +			  entry-latency-us = <2000>;
> +			  exit-latency-us = <2000>;
> +			  min-residency-us = <6000>;
>  		};
>  	};
> 
> --
> 2.20.1

Re: [PATCH AUTOSEL 5.1 08/39] arm64: dts: ls1028a: Fix CPU idle fail.

[Greg KH]

On Thu, Jul 11, 2019 at 05:04:24AM +0000, Ran Wang wrote:
> Hi Sasha, 
> 
>     Thanks for helping port this patch to stable.
>     May I know if I can submit other bug fixes which has been accepted by upstream to stable by myself?
>     If yes, where I can find related process for reference?

Sure!, please read:
    https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html