* Re: [PATCH] ath10k: work around uninitialized vht_pfr variable
2019-07-08 12:50 [PATCH] ath10k: work around uninitialized vht_pfr variable Arnd Bergmann
@ 2019-07-08 14:46 ` Nathan Chancellor
2019-07-08 20:34 ` Brian Norris
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Nathan Chancellor @ 2019-07-08 14:46 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kalle Valo, Miaoqing Pan, David S. Miller, Rakesh Pillai,
Brian Norris, Balaji Pothunoori, Wen Gong,
Pradeep kumar Chitrapu, Sriram R, ath10k, linux-wireless, netdev,
linux-kernel, clang-built-linux
On Mon, Jul 08, 2019 at 02:50:06PM +0200, Arnd Bergmann wrote:
> As clang points out, the vht_pfr is assigned to a struct member
> without being initialized in one case:
>
> drivers/net/wireless/ath/ath10k/mac.c:7528:7: error: variable 'vht_pfr' is used uninitialized whenever 'if' condition
> is false [-Werror,-Wsometimes-uninitialized]
> if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7551:20: note: uninitialized use occurs here
> arvif->vht_pfr = vht_pfr;
> ^~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7528:3: note: remove the 'if' if its condition is always true
> if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7483:12: note: initialize the variable 'vht_pfr' to silence this warning
> u8 vht_pfr;
>
> Add an explicit but probably incorrect initialization here.
> I suspect we want a better fix here, but chose this approach to
> illustrate the issue.
Yup, I reached out to the maintainers when this issue first cropped up,
should have taken your approach though.
https://lore.kernel.org/lkml/20190702181837.GA118849@archlinux-epyc/
Initializing to zero is better than uninitialized.
>
> Fixes: 8b97b055dc9d ("ath10k: fix failure to set multiple fixed rate")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] ath10k: work around uninitialized vht_pfr variable
2019-07-08 12:50 [PATCH] ath10k: work around uninitialized vht_pfr variable Arnd Bergmann
2019-07-08 14:46 ` Nathan Chancellor
@ 2019-07-08 20:34 ` Brian Norris
2019-07-15 9:44 ` Kalle Valo
2019-07-15 17:50 ` Kalle Valo
3 siblings, 0 replies; 5+ messages in thread
From: Brian Norris @ 2019-07-08 20:34 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Kalle Valo, Miaoqing Pan, David S. Miller, Rakesh Pillai,
Balaji Pothunoori, Wen Gong, Pradeep kumar Chitrapu, Sriram R,
ath10k, linux-wireless, <netdev@vger.kernel.org>,
Linux Kernel, clang-built-linux
Hi Arnd,
On Mon, Jul 8, 2019 at 5:50 AM Arnd Bergmann <arnd@arndb.de> wrote:
>
> As clang points out, the vht_pfr is assigned to a struct member
> without being initialized in one case:
>
> drivers/net/wireless/ath/ath10k/mac.c:7528:7: error: variable 'vht_pfr' is used uninitialized whenever 'if' condition
> is false [-Werror,-Wsometimes-uninitialized]
> if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7551:20: note: uninitialized use occurs here
> arvif->vht_pfr = vht_pfr;
> ^~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7528:3: note: remove the 'if' if its condition is always true
> if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7483:12: note: initialize the variable 'vht_pfr' to silence this warning
> u8 vht_pfr;
>
> Add an explicit but probably incorrect initialization here.
> I suspect we want a better fix here, but chose this approach to
> illustrate the issue.
>
> Fixes: 8b97b055dc9d ("ath10k: fix failure to set multiple fixed rate")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/net/wireless/ath/ath10k/mac.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
> index e43a566eef77..0606416dc971 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -7541,6 +7541,8 @@ static int ath10k_mac_op_set_bitrate_mask(struct ieee80211_hw *hw,
> &vht_nss,
> true);
^^ Technically, this call to ath10k_mac_bitrate_mask_get_single_rate()
can fail to assign 'vht_pfr' as well. I can't immediately tell whether
it provably will never hit the -EINVAL case, but if we do, then you'd
have another uninitialized case.
I *believe* it shouldn't fail, since we already pre-checked the VHT
MCS lists for "exactly 1" rate. But it still seems like better code to
pre-initialize and/or add error-handling, so we don't rely on that
implicit proof.
I'm not quite sure yet what the "better" answer should be for
resolving this, but at a minimum, I think the above could be improved.
Brian
> update_bitrate_mask = false;
> + } else {
> + vht_pfr = 0;
> }
>
> mutex_lock(&ar->conf_mutex);
> --
> 2.20.0
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] ath10k: work around uninitialized vht_pfr variable
2019-07-08 12:50 [PATCH] ath10k: work around uninitialized vht_pfr variable Arnd Bergmann
2019-07-08 14:46 ` Nathan Chancellor
2019-07-08 20:34 ` Brian Norris
@ 2019-07-15 9:44 ` Kalle Valo
2019-07-15 17:50 ` Kalle Valo
3 siblings, 0 replies; 5+ messages in thread
From: Kalle Valo @ 2019-07-15 9:44 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Miaoqing Pan, David S. Miller, Rakesh Pillai, Brian Norris,
Balaji Pothunoori, Wen Gong, Pradeep kumar Chitrapu, Sriram R,
ath10k, linux-wireless, netdev, linux-kernel, clang-built-linux
Arnd Bergmann <arnd@arndb.de> writes:
> As clang points out, the vht_pfr is assigned to a struct member
> without being initialized in one case:
>
> drivers/net/wireless/ath/ath10k/mac.c:7528:7: error: variable 'vht_pfr' is used uninitialized whenever 'if' condition
> is false [-Werror,-Wsometimes-uninitialized]
> if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7551:20: note: uninitialized use occurs here
> arvif->vht_pfr = vht_pfr;
> ^~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7528:3: note: remove the 'if' if its condition is always true
> if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7483:12: note: initialize the variable 'vht_pfr' to silence this warning
> u8 vht_pfr;
>
> Add an explicit but probably incorrect initialization here.
> I suspect we want a better fix here, but chose this approach to
> illustrate the issue.
>
> Fixes: 8b97b055dc9d ("ath10k: fix failure to set multiple fixed rate")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I'll queue this for v5.3.
--
Kalle Valo
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] ath10k: work around uninitialized vht_pfr variable
2019-07-08 12:50 [PATCH] ath10k: work around uninitialized vht_pfr variable Arnd Bergmann
` (2 preceding siblings ...)
2019-07-15 9:44 ` Kalle Valo
@ 2019-07-15 17:50 ` Kalle Valo
3 siblings, 0 replies; 5+ messages in thread
From: Kalle Valo @ 2019-07-15 17:50 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Arnd Bergmann, Miaoqing Pan, David S. Miller, Rakesh Pillai,
Brian Norris, Balaji Pothunoori, Wen Gong,
Pradeep kumar Chitrapu, Sriram R, ath10k, linux-wireless, netdev,
linux-kernel, clang-built-linux
Arnd Bergmann <arnd@arndb.de> wrote:
> As clang points out, the vht_pfr is assigned to a struct member
> without being initialized in one case:
>
> drivers/net/wireless/ath/ath10k/mac.c:7528:7: error: variable 'vht_pfr' is used uninitialized whenever 'if' condition
> is false [-Werror,-Wsometimes-uninitialized]
> if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7551:20: note: uninitialized use occurs here
> arvif->vht_pfr = vht_pfr;
> ^~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7528:3: note: remove the 'if' if its condition is always true
> if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath10k/mac.c:7483:12: note: initialize the variable 'vht_pfr' to silence this warning
> u8 vht_pfr;
>
> Add an explicit but probably incorrect initialization here.
> I suspect we want a better fix here, but chose this approach to
> illustrate the issue.
>
> Fixes: 8b97b055dc9d ("ath10k: fix failure to set multiple fixed rate")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Patch applied to wireless-drivers.git, thanks.
ff414f31ce37 ath10k: work around uninitialized vht_pfr variable
--
https://patchwork.kernel.org/patch/11034993/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 5+ messages in thread