[PATCH 4.9 000/102] 4.9.185-stable review

[PATCH 4.9 000/102] 4.9.185-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.185 release.
There are 102 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed 10 Jul 2019 03:03:52 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.185-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.185-rc1

Ard Biesheuvel <ard.biesheuvel@linaro.org>
    arm64: kaslr: keep modules inside module region when KASAN is enabled

Robin Gong <yibin.gong@nxp.com>
    dmaengine: imx-sdma: remove BD_INTR for channel0

Dmitry Korotin <dkorotin@wavecomp.com>
    MIPS: Add missing EHB in mtc0 -> mfc0 sequence.

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/hfi1: Close PSM sdma_progress sleep window

Wanpeng Li <wanpengli@tencent.com>
    KVM: LAPIC: Fix pending interrupt in IRR blocked by software disable LAPIC

Kees Cook <keescook@chromium.org>
    arm64, vdso: Define vdso_{start,end} as array

Linus Torvalds <torvalds@linux-foundation.org>
    tty: rocket: fix incorrect forward declaration of 'rp_init()'

Nikolay Borisov <nborisov@suse.com>
    btrfs: Ensure replaced device doesn't have pending chunk allocation

Robert Beckett <bob.beckett@collabora.com>
    drm/imx: only send event on crtc disable if kept disabled

Robert Beckett <bob.beckett@collabora.com>
    drm/imx: notify drm core before sending event during crtc disable

Herbert Xu <herbert@gondor.apana.org.au>
    lib/mpi: Fix karactx leak in mpi_powm

Colin Ian King <colin.king@canonical.com>
    ALSA: usb-audio: fix sign unintended sign extension on left shifts

Takashi Iwai <tiwai@suse.de>
    ALSA: line6: Fix write on zero-sized buffer

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages

Colin Ian King <colin.king@canonical.com>
    ALSA: seq: fix incorrect order of dest_client/dest_ports arguments

Eric Biggers <ebiggers@google.com>
    crypto: user - prevent operating on larval algorithms

Jann Horn <jannh@google.com>
    ptrace: Fix ->ptracer_cred handling for PTRACE_TRACEME

Paul Burton <paul.burton@mips.com>
    MIPS: Workaround GCC __builtin_unreachable reordering bug

Lucas De Marchi <lucas.demarchi@intel.com>
    drm/i915/dmc: protect against reading random memory

Paolo Bonzini <pbonzini@redhat.com>
    KVM: x86: degrade WARN to pr_warn_ratelimited

Arnd Bergmann <arnd@arndb.de>
    clk: sunxi: fix uninitialized access

Vineet Gupta <vgupta@synopsys.com>
    ARC: handle gcc generated __builtin_trap for older compiler

Arnd Bergmann <arnd@arndb.de>
    bug.h: work around GCC PR82365 in BUG()

Vineet Gupta <vgupta@synopsys.com>
    ARC: fix allnoconfig build warning

Arnd Bergmann <arnd@arndb.de>
    mfd: omap-usb-tll: Fix register offsets

Paul Burton <paul.burton@mips.com>
    MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()

Manuel Lauss <manuel.lauss@gmail.com>
    MIPS: math-emu: do not use bools for arithmetic

swkhack <swkhack@gmail.com>
    mm/mlock.c: change count_mm_mlocked_page_nr return type

Manuel Traut <manut@linutronix.de>
    scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE

Don Brace <don.brace@microsemi.com>
    scsi: hpsa: correct ioaccel2 chaining

Alexandre Belloni <alexandre.belloni@bootlin.com>
    usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC

Young Xiao <92siuyang@gmail.com>
    usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]

Yu-Hsuan Hsu <yuhsuan@chromium.org>
    ASoC: max98090: remove 24-bit format support if RJ is 0

Hsin-Yi Wang <hsinyi@chromium.org>
    drm/mediatek: fix unbind functions

YueHaibing <yuehaibing@huawei.com>
    spi: bitbang: Fix NULL pointer dereference in spi_unregister_master

Libin Yang <libin.yang@intel.com>
    ASoC: soc-pcm: BE dai needs prepare when pause release after resume

Matt Flax <flatmax@flatmax.org>
    ASoC : cs4265 : readable register too low

Matias Karhumaa <matias.karhumaa@gmail.com>
    Bluetooth: Fix faulty expression for minimum encryption key size check

Xin Long <lucien.xin@gmail.com>
    tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb

Martin KaFai Lau <kafai@fb.com>
    bpf: udp: ipv6: Avoid running reuseport's bpf_prog from __udp6_lib_err

Martin KaFai Lau <kafai@fb.com>
    bpf: udp: Avoid calling reuseport's bpf_prog from udp_gro

Josh Elsasser <jelsasser@appneta.com>
    net: check before dereferencing netdev_ops during busy poll

Stephen Suryaputra <ssuryaextr@gmail.com>
    ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop

YueHaibing <yuehaibing@huawei.com>
    bonding: Always enable vlan tx offload

YueHaibing <yuehaibing@huawei.com>
    team: Always enable vlan tx offload

Fei Li <lifei.shirley@bytedance.com>
    tun: wake up waitqueues after IFF_UP is set

Xin Long <lucien.xin@gmail.com>
    tipc: check msg->req data len in tipc_nl_compat_bearer_disable

Xin Long <lucien.xin@gmail.com>
    tipc: change to use register_pernet_device

Xin Long <lucien.xin@gmail.com>
    sctp: change to hold sk after auth shkey is created successfully

Roland Hii <roland.king.guan.hii@intel.com>
    net: stmmac: fixed new system time seconds value calculation

Neil Horman <nhorman@tuxdriver.com>
    af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET

Geert Uytterhoeven <geert@linux-m68k.org>
    cpu/speculation: Warn on unsupported mitigations= parameter

Trond Myklebust <trondmy@gmail.com>
    NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O

Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
    x86/speculation: Allow guests to use SSBD even if host does not

Jan Kara <jack@suse.cz>
    scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()

Colin Ian King <colin.king@canonical.com>
    mm/page_idle.c: fix oops because end_pfn is larger than max_pfn

Jann Horn <jannh@google.com>
    fs/binfmt_flat.c: make load_flat_shared_library() work

John Ogness <john.ogness@linutronix.de>
    fs/proc/array.c: allow reporting eip/esp for all coredumping threads

Adeodato Simó <dato@net.com.org.es>
    net/9p: include trans_common.h to fix missing prototype warning.

Dominique Martinet <dominique.martinet@cea.fr>
    9p: p9dirent_read: check network-provided name length

Dominique Martinet <dominique.martinet@cea.fr>
    9p/rdma: remove useless check in cm_event_handler

Dominique Martinet <dominique.martinet@cea.fr>
    9p: acl: fix uninitialized iattr access

Dominique Martinet <dominique.martinet@cea.fr>
    9p/rdma: do not disconnect on down_interruptible EAGAIN

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf header: Fix unchecked usage of strncpy()

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf help: Remove needless use of strncpy()

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf ui helpline: Use strlcpy() as a shorter form of strncpy() + explicit set nul

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/hfi1: Avoid hardlockup with flushlist_lock

Jouni Malinen <j@w1.fi>
    mac80211: Do not use stack memory with scatterlist for GMAC

Johannes Berg <johannes.berg@intel.com>
    mac80211: drop robust management frames from unknown TA

Eric Biggers <ebiggers@google.com>
    cfg80211: fix memory leak of wiphy device name

Marcel Holtmann <marcel@holtmann.org>
    Bluetooth: Fix regression with minimum encryption key size alignment

Marcel Holtmann <marcel@holtmann.org>
    Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

Fabio Estevam <festevam@gmail.com>
    ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX

Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
    powerpc/bpf: use unsigned division instruction for 64-bit operations

Willem de Bruijn <willemb@google.com>
    can: purge socket error queue on sock destruct

Joakim Zhang <qiangqing.zhang@nxp.com>
    can: flexcan: fix timeout when set small bitrate

Naohiro Aota <naohiro.aota@wdc.com>
    btrfs: start readahead also in seed devices

Jaesoo Lee <jalee@purestorage.com>
    nvme: Fix u32 overflow in the number of namespace list calculation

Robert Hancock <hancock@sedsystems.ca>
    hwmon: (pmbus/core) Treat parameters as paged if on multiple pages

Alexandra Winter <wintera@linux.ibm.com>
    s390/qeth: fix VLAN attribute in bridge_hostnotify udev event

Avri Altman <avri.altman@wdc.com>
    scsi: ufs: Check that space was properly alloced in copy_query_response

George G. Davis <george_davis@mentor.com>
    scripts/checkstack.pl: Fix arm64 wrong or unknown architecture

Robin Murphy <robin.murphy@arm.com>
    drm/arm/hdlcd: Allow a bit of clock tolerance

Sean Wang <sean.wang@mediatek.com>
    net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled

Sean Wang <sean.wang@mediatek.com>
    net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported

Young Xiao <92siuyang@gmail.com>
    sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: Fix loopback test failed at copper ports

Nikita Yushchenko <nikita.yoush@cogentembedded.com>
    net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0

YueHaibing <yuehaibing@huawei.com>
    MIPS: uprobes: remove set but not used variable 'epc'

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/hfi1: Insure freeze_work work_struct is canceled on shutdown

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/rdmavt: Fix alloc_qpn() WARN_ON()

Helge Deller <deller@gmx.de>
    parisc: Fix compiler warnings in float emulation code

YueHaibing <yuehaibing@huawei.com>
    parport: Fix mem leak in parport_register_dev_model

Vineet Gupta <vgupta@synopsys.com>
    ARC: fix build warnings with !CONFIG_KPROBES

Jann Horn <jannh@google.com>
    apparmor: enforce nullbyte at end of tag string

Andrey Smirnov <andrew.smirnov@gmail.com>
    Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/hfi1: Silence txreq allocation warnings

Peter Chen <peter.chen@nxp.com>
    usb: chipidea: udc: workaround for endpoint conflict issue

Stanley Chu <stanley.chu@mediatek.com>
    scsi: ufs: Avoid runtime suspend possibly being blocked forever

Linus Torvalds <torvalds@linux-foundation.org>
    gcc-9: silence 'address-of-packed-member' warning

Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
    tracing: Silence GCC 9 array bounds warning


-------------

Diffstat:

 Makefile                                           |  6 ++--
 arch/arc/Kconfig                                   |  2 +-
 arch/arc/include/asm/bug.h                         |  3 +-
 arch/arc/include/asm/cmpxchg.h                     | 14 ++++++---
 arch/arc/kernel/traps.c                            |  8 +++++
 arch/arc/mm/tlb.c                                  | 13 ++++----
 arch/arm/mach-imx/cpuidle-imx6sx.c                 |  3 +-
 arch/arm64/kernel/module.c                         |  8 +++--
 arch/arm64/kernel/vdso.c                           | 10 +++----
 arch/ia64/include/asm/bug.h                        |  6 +++-
 arch/m68k/include/asm/bug.h                        |  3 ++
 arch/mips/Kconfig                                  |  1 +
 arch/mips/include/asm/compiler.h                   | 35 ++++++++++++++++++++++
 arch/mips/include/asm/netlogic/xlr/fmn.h           |  2 --
 arch/mips/kernel/uprobes.c                         |  3 --
 arch/mips/math-emu/cp1emu.c                        |  4 +--
 arch/mips/mm/tlbex.c                               | 29 ++++++++++++------
 arch/parisc/math-emu/cnv_float.h                   |  8 ++---
 arch/powerpc/include/asm/ppc-opcode.h              |  1 +
 arch/powerpc/net/bpf_jit.h                         |  2 +-
 arch/powerpc/net/bpf_jit_comp64.c                  |  8 ++---
 arch/sparc/include/asm/bug.h                       |  6 +++-
 arch/sparc/kernel/perf_event.c                     |  4 +++
 arch/x86/kernel/cpu/bugs.c                         | 11 ++++++-
 arch/x86/kvm/lapic.c                               |  2 +-
 arch/x86/kvm/x86.c                                 |  6 ++--
 crypto/crypto_user.c                               |  3 ++
 drivers/clk/sunxi/clk-sun8i-bus-gates.c            |  4 +++
 drivers/dma/imx-sdma.c                             |  4 +--
 drivers/gpu/drm/arm/hdlcd_crtc.c                   |  3 +-
 drivers/gpu/drm/i915/intel_csr.c                   | 18 +++++++++++
 drivers/gpu/drm/imx/ipuv3-crtc.c                   |  6 ++--
 drivers/gpu/drm/mediatek/mtk_dsi.c                 |  2 ++
 drivers/hwmon/pmbus/pmbus_core.c                   | 34 ++++++++++++++++++---
 drivers/infiniband/hw/hfi1/chip.c                  |  1 +
 drivers/infiniband/hw/hfi1/sdma.c                  |  9 ++----
 drivers/infiniband/hw/hfi1/user_sdma.c             | 13 +++-----
 drivers/infiniband/hw/hfi1/verbs.c                 |  2 --
 drivers/infiniband/hw/hfi1/verbs_txreq.c           |  2 +-
 drivers/infiniband/hw/hfi1/verbs_txreq.h           |  3 +-
 drivers/infiniband/hw/qib/qib_verbs.c              |  2 --
 drivers/infiniband/sw/rdmavt/mr.c                  |  2 ++
 drivers/infiniband/sw/rdmavt/qp.c                  |  3 +-
 drivers/input/misc/uinput.c                        | 22 ++++++++++++--
 drivers/mfd/omap-usb-tll.c                         |  4 +--
 drivers/net/bonding/bond_main.c                    |  2 +-
 drivers/net/can/flexcan.c                          |  2 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |  2 +-
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c   |  4 +++
 drivers/net/ethernet/mediatek/mtk_eth_soc.c        | 15 +++++-----
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  |  2 +-
 drivers/net/team/team.c                            |  2 +-
 drivers/net/tun.c                                  | 19 ++++++------
 drivers/nvme/host/core.c                           |  3 +-
 drivers/parport/share.c                            |  2 ++
 drivers/s390/net/qeth_l2_main.c                    |  2 +-
 drivers/scsi/hpsa.c                                |  7 ++++-
 drivers/scsi/hpsa_cmd.h                            |  1 +
 drivers/scsi/ufs/ufshcd-pltfrm.c                   | 11 +++----
 drivers/scsi/ufs/ufshcd.c                          |  3 +-
 drivers/scsi/vmw_pvscsi.c                          |  6 ++--
 drivers/spi/spi-bitbang.c                          |  2 +-
 drivers/tty/rocket.c                               |  2 +-
 drivers/usb/chipidea/udc.c                         | 20 +++++++++++++
 drivers/usb/gadget/udc/fusb300_udc.c               |  5 ++++
 drivers/usb/gadget/udc/lpc32xx_udc.c               |  3 +-
 fs/9p/acl.c                                        |  2 +-
 fs/binfmt_flat.c                                   | 23 +++++---------
 fs/btrfs/dev-replace.c                             | 29 +++++++++++-------
 fs/btrfs/reada.c                                   |  5 ++++
 fs/btrfs/volumes.c                                 |  2 ++
 fs/btrfs/volumes.h                                 |  5 ++++
 fs/nfs/flexfilelayout/flexfilelayoutdev.c          |  2 +-
 fs/proc/array.c                                    |  2 +-
 include/asm-generic/bug.h                          |  1 +
 include/linux/compiler-gcc.h                       | 15 +++++++++-
 include/linux/compiler.h                           |  5 ++++
 include/net/bluetooth/hci_core.h                   |  3 ++
 kernel/cpu.c                                       |  3 ++
 kernel/ptrace.c                                    |  4 +--
 kernel/trace/trace.c                               |  6 +---
 kernel/trace/trace.h                               | 18 +++++++++++
 kernel/trace/trace_kdb.c                           |  6 +---
 lib/mpi/mpi-pow.c                                  |  6 ++--
 mm/mlock.c                                         |  4 +--
 mm/page_idle.c                                     |  4 +--
 net/9p/protocol.c                                  | 12 ++++++--
 net/9p/trans_common.c                              |  1 +
 net/9p/trans_rdma.c                                |  7 ++---
 net/bluetooth/hci_conn.c                           | 10 ++++++-
 net/bluetooth/l2cap_core.c                         | 33 ++++++++++++++++----
 net/can/af_can.c                                   |  1 +
 net/core/dev.c                                     |  5 +++-
 net/ipv4/raw.c                                     |  2 +-
 net/ipv4/udp.c                                     |  6 +++-
 net/ipv6/udp.c                                     |  4 +--
 net/mac80211/rx.c                                  |  2 ++
 net/mac80211/wpa.c                                 |  7 ++++-
 net/packet/af_packet.c                             | 20 +++++++++++--
 net/packet/internal.h                              |  1 +
 net/sctp/endpointola.c                             |  8 ++---
 net/tipc/core.c                                    | 12 ++++----
 net/tipc/netlink_compat.c                          | 18 +++++++++--
 net/tipc/udp_media.c                               |  8 ++---
 net/wireless/core.c                                |  2 +-
 scripts/checkstack.pl                              |  2 +-
 scripts/decode_stacktrace.sh                       |  2 +-
 security/apparmor/policy_unpack.c                  |  2 +-
 sound/core/seq/oss/seq_oss_ioctl.c                 |  2 +-
 sound/core/seq/oss/seq_oss_rw.c                    |  2 +-
 sound/firewire/amdtp-am824.c                       |  2 +-
 sound/soc/codecs/cs4265.c                          |  2 +-
 sound/soc/codecs/max98090.c                        | 16 ++++++++++
 sound/soc/soc-pcm.c                                |  3 +-
 sound/usb/line6/pcm.c                              |  5 ++++
 sound/usb/mixer_quirks.c                           |  4 +--
 tools/perf/builtin-help.c                          |  2 +-
 tools/perf/ui/tui/helpline.c                       |  2 +-
 tools/perf/util/header.c                           |  2 +-
 119 files changed, 568 insertions(+), 234 deletions(-)

[PATCH 4.9 001/102] tracing: Silence GCC 9 array bounds warning

[Greg Kroah-Hartman]

From: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

commit 0c97bf863efce63d6ab7971dad811601e6171d2f upstream.

Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.

Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:

    In function 'memset',
        inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
    ./include/linux/string.h:344:9: warning: '__builtin_memset' offset
    [8505, 8560] from the object at 'iter' is out of the bounds of
    referenced subobject 'seq' with type 'struct trace_seq' at offset
    4368 [-Warray-bounds]
      344 |  return __builtin_memset(p, c, size);
          |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.

Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.

Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com

Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c     |    6 +-----
 kernel/trace/trace.h     |   18 ++++++++++++++++++
 kernel/trace/trace_kdb.c |    6 +-----
 3 files changed, 20 insertions(+), 10 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -7613,12 +7613,8 @@ void ftrace_dump(enum ftrace_dump_mode o
 
 		cnt++;
 
-		/* reset all but tr, trace, and overruns */
-		memset(&iter.seq, 0,
-		       sizeof(struct trace_iterator) -
-		       offsetof(struct trace_iterator, seq));
+		trace_iterator_reset(&iter);
 		iter.iter_flags |= TRACE_FILE_LAT_FMT;
-		iter.pos = -1;
 
 		if (trace_find_next_entry_inc(&iter) != NULL) {
 			int ret;
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -1673,4 +1673,22 @@ static inline void trace_event_enum_upda
 
 extern struct trace_iterator *tracepoint_print_iter;
 
+/*
+ * Reset the state of the trace_iterator so that it can read consumed data.
+ * Normally, the trace_iterator is used for reading the data when it is not
+ * consumed, and must retain state.
+ */
+static __always_inline void trace_iterator_reset(struct trace_iterator *iter)
+{
+	const size_t offset = offsetof(struct trace_iterator, seq);
+
+	/*
+	 * Keep gcc from complaining about overwriting more than just one
+	 * member in the structure.
+	 */
+	memset((char *)iter + offset, 0, sizeof(struct trace_iterator) - offset);
+
+	iter->pos = -1;
+}
+
 #endif /* _LINUX_KERNEL_TRACE_H */
--- a/kernel/trace/trace_kdb.c
+++ b/kernel/trace/trace_kdb.c
@@ -40,12 +40,8 @@ static void ftrace_dump_buf(int skip_lin
 
 	kdb_printf("Dumping ftrace buffer:\n");
 
-	/* reset all but tr, trace, and overruns */
-	memset(&iter.seq, 0,
-		   sizeof(struct trace_iterator) -
-		   offsetof(struct trace_iterator, seq));
+	trace_iterator_reset(&iter);
 	iter.iter_flags |= TRACE_FILE_LAT_FMT;
-	iter.pos = -1;
 
 	if (cpu_file == RING_BUFFER_ALL_CPUS) {
 		for_each_tracing_cpu(cpu) {

[PATCH 4.9 002/102] gcc-9: silence address-of-packed-member warning

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 6f303d60534c46aa1a239f29c321f95c83dda748 upstream.

We already did this for clang, but now gcc has that warning too.  Yes,
yes, the address may be unaligned.  And that's kind of the point.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Makefile
+++ b/Makefile
@@ -647,6 +647,7 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
 KBUILD_CFLAGS	+= $(call cc-disable-warning, format-truncation)
 KBUILD_CFLAGS	+= $(call cc-disable-warning, format-overflow)
 KBUILD_CFLAGS	+= $(call cc-disable-warning, int-in-bool-context)
+KBUILD_CFLAGS	+= $(call cc-disable-warning, address-of-packed-member)
 KBUILD_CFLAGS	+= $(call cc-disable-warning, attribute-alias)
 
 ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
@@ -718,7 +719,6 @@ ifeq ($(cc-name),clang)
 KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
 KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
 KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
-KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
 # Quiet clang warning: comparison of unsigned expression < 0 is always false
 KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the

[PATCH 4.9 003/102] scsi: ufs: Avoid runtime suspend possibly being blocked forever

[Greg Kroah-Hartman]

From: Stanley Chu <stanley.chu@mediatek.com>

commit 24e2e7a19f7e4b83d0d5189040d997bce3596473 upstream.

UFS runtime suspend can be triggered after pm_runtime_enable() is invoked
in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered
before binding ufs_hba structure to ufs device structure via
platform_set_drvdata(), then UFS runtime suspend will be no longer
triggered in the future because its dev->power.runtime_error was set in the
first triggering and does not have any chance to be cleared.

To be more clear, dev->power.runtime_error is set if hba is NULL in
ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where
dev->power.runtime_error is set as -EINVAL. In this case, any future
rpm_suspend() for UFS device fails because rpm_check_suspend_allowed()
fails due to non-zero
dev->power.runtime_error.

To resolve this issue, make sure the first UFS runtime suspend get valid
"hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is
successfully bound to UFS device structure.

Fixes: 62694735ca95 ([SCSI] ufs: Add runtime PM support for UFS host controller driver)
Cc: stable@vger.kernel.org
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/ufs/ufshcd-pltfrm.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -342,24 +342,21 @@ int ufshcd_pltfrm_init(struct platform_d
 		goto dealloc_host;
 	}
 
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-
 	ufshcd_init_lanes_per_dir(hba);
 
 	err = ufshcd_init(hba, mmio_base, irq);
 	if (err) {
 		dev_err(dev, "Initialization failed\n");
-		goto out_disable_rpm;
+		goto dealloc_host;
 	}
 
 	platform_set_drvdata(pdev, hba);
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 
-out_disable_rpm:
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_set_suspended(&pdev->dev);
 dealloc_host:
 	ufshcd_dealloc_host(hba);
 out:

[PATCH 4.9 004/102] usb: chipidea: udc: workaround for endpoint conflict issue

[Greg Kroah-Hartman]

From: Peter Chen <peter.chen@nxp.com>

commit c19dffc0a9511a7d7493ec21019aefd97e9a111b upstream.

An endpoint conflict occurs when the USB is working in device mode
during an isochronous communication. When the endpointA IN direction
is an isochronous IN endpoint, and the host sends an IN token to
endpointA on another device, then the OUT transaction may be missed
regardless the OUT endpoint number. Generally, this occurs when the
device is connected to the host through a hub and other devices are
connected to the same hub.

The affected OUT endpoint can be either control, bulk, isochronous, or
an interrupt endpoint. After the OUT endpoint is primed, if an IN token
to the same endpoint number on another device is received, then the OUT
endpoint may be unprimed (cannot be detected by software), which causes
this endpoint to no longer respond to the host OUT token, and thus, no
corresponding interrupt occurs.

There is no good workaround for this issue, the only thing the software
could do is numbering isochronous IN from the highest endpoint since we
have observed most of device number endpoint from the lowest.

Cc: <stable@vger.kernel.org> #v3.14+
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/chipidea/udc.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1621,6 +1621,25 @@ static int ci_udc_pullup(struct usb_gadg
 static int ci_udc_start(struct usb_gadget *gadget,
 			 struct usb_gadget_driver *driver);
 static int ci_udc_stop(struct usb_gadget *gadget);
+
+/* Match ISOC IN from the highest endpoint */
+static struct usb_ep *ci_udc_match_ep(struct usb_gadget *gadget,
+			      struct usb_endpoint_descriptor *desc,
+			      struct usb_ss_ep_comp_descriptor *comp_desc)
+{
+	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+	struct usb_ep *ep;
+
+	if (usb_endpoint_xfer_isoc(desc) && usb_endpoint_dir_in(desc)) {
+		list_for_each_entry_reverse(ep, &ci->gadget.ep_list, ep_list) {
+			if (ep->caps.dir_in && !ep->claimed)
+				return ep;
+		}
+	}
+
+	return NULL;
+}
+
 /**
  * Device operations part of the API to the USB controller hardware,
  * which don't involve endpoints (or i/o)
@@ -1634,6 +1653,7 @@ static const struct usb_gadget_ops usb_g
 	.vbus_draw	= ci_udc_vbus_draw,
 	.udc_start	= ci_udc_start,
 	.udc_stop	= ci_udc_stop,
+	.match_ep 	= ci_udc_match_ep,
 };
 
 static int init_eps(struct ci_hdrc *ci)

[PATCH 4.9 005/102] IB/hfi1: Silence txreq allocation warnings

[Greg Kroah-Hartman]

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

commit 3230f4a8d44e4a0bb7afea814b280b5129521f52 upstream.

The following warning can happen when a memory shortage
occurs during txreq allocation:

[10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
[10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
[10220.939247]   cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0
[10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1]
[10220.939261]   node 0: slabs: 1026568, objs: 43115856, free: 0
[10220.939262] Call Trace:
[10220.939262]   node 1: slabs: 820872, objs: 34476624, free: 0
[10220.939263]  dump_stack+0x5a/0x73
[10220.939265]  warn_alloc+0x103/0x190
[10220.939267]  ? wake_all_kswapds+0x54/0x8b
[10220.939268]  __alloc_pages_slowpath+0x86c/0xa2e
[10220.939270]  ? __alloc_pages_nodemask+0x2fe/0x320
[10220.939271]  __alloc_pages_nodemask+0x2fe/0x320
[10220.939273]  new_slab+0x475/0x550
[10220.939275]  ___slab_alloc+0x36c/0x520
[10220.939287]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939299]  ? __get_txreq+0x54/0x160 [hfi1]
[10220.939310]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939312]  __slab_alloc+0x40/0x61
[10220.939323]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939325]  kmem_cache_alloc+0x181/0x1b0
[10220.939336]  hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939348]  ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1]
[10220.939359]  ? find_prev_entry+0xb0/0xb0 [hfi1]
[10220.939371]  hfi1_do_send+0x1d9/0x3f0 [hfi1]
[10220.939372]  process_one_work+0x171/0x380
[10220.939374]  worker_thread+0x49/0x3f0
[10220.939375]  kthread+0xf8/0x130
[10220.939377]  ? max_active_store+0x80/0x80
[10220.939378]  ? kthread_bind+0x10/0x10
[10220.939379]  ret_from_fork+0x35/0x40
[10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)

The shortage is handled properly so the message isn't needed. Silence by
adding the no warn option to the slab allocation.

Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hfi1/verbs_txreq.c |    2 +-
 drivers/infiniband/hw/hfi1/verbs_txreq.h |    3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/hfi1/verbs_txreq.c
+++ b/drivers/infiniband/hw/hfi1/verbs_txreq.c
@@ -100,7 +100,7 @@ struct verbs_txreq *__get_txreq(struct h
 	if (ib_rvt_state_ops[qp->state] & RVT_PROCESS_RECV_OK) {
 		struct hfi1_qp_priv *priv;
 
-		tx = kmem_cache_alloc(dev->verbs_txreq_cache, GFP_ATOMIC);
+		tx = kmem_cache_alloc(dev->verbs_txreq_cache, VERBS_TXREQ_GFP);
 		if (tx)
 			goto out;
 		priv = qp->priv;
--- a/drivers/infiniband/hw/hfi1/verbs_txreq.h
+++ b/drivers/infiniband/hw/hfi1/verbs_txreq.h
@@ -71,6 +71,7 @@ struct hfi1_ibdev;
 struct verbs_txreq *__get_txreq(struct hfi1_ibdev *dev,
 				struct rvt_qp *qp);
 
+#define VERBS_TXREQ_GFP (GFP_ATOMIC | __GFP_NOWARN)
 static inline struct verbs_txreq *get_txreq(struct hfi1_ibdev *dev,
 					    struct rvt_qp *qp)
 	__must_hold(&qp->slock)
@@ -78,7 +79,7 @@ static inline struct verbs_txreq *get_tx
 	struct verbs_txreq *tx;
 	struct hfi1_qp_priv *priv = qp->priv;
 
-	tx = kmem_cache_alloc(dev->verbs_txreq_cache, GFP_ATOMIC);
+	tx = kmem_cache_alloc(dev->verbs_txreq_cache, VERBS_TXREQ_GFP);
 	if (unlikely(!tx)) {
 		/* call slow path to get the lock */
 		tx = __get_txreq(dev, qp);

[PATCH 4.9 006/102] Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD

[Greg Kroah-Hartman]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

commit 7c7da40da1640ce6814dab1e8031b44e19e5a3f6 upstream.

In the case of compat syscall ioctl numbers for UI_BEGIN_FF_UPLOAD and
UI_END_FF_UPLOAD need to be adjusted before being passed on
uinput_ioctl_handler() since code built with -m32 will be passing
slightly different values. Extend the code already covering
UI_SET_PHYS to cover UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD as well.

Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/misc/uinput.c |   22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -991,13 +991,31 @@ static long uinput_ioctl(struct file *fi
 
 #ifdef CONFIG_COMPAT
 
-#define UI_SET_PHYS_COMPAT	_IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t)
+/*
+ * These IOCTLs change their size and thus their numbers between
+ * 32 and 64 bits.
+ */
+#define UI_SET_PHYS_COMPAT		\
+	_IOW(UINPUT_IOCTL_BASE, 108, compat_uptr_t)
+#define UI_BEGIN_FF_UPLOAD_COMPAT	\
+	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload_compat)
+#define UI_END_FF_UPLOAD_COMPAT		\
+	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload_compat)
 
 static long uinput_compat_ioctl(struct file *file,
 				unsigned int cmd, unsigned long arg)
 {
-	if (cmd == UI_SET_PHYS_COMPAT)
+	switch (cmd) {
+	case UI_SET_PHYS_COMPAT:
 		cmd = UI_SET_PHYS;
+		break;
+	case UI_BEGIN_FF_UPLOAD_COMPAT:
+		cmd = UI_BEGIN_FF_UPLOAD;
+		break;
+	case UI_END_FF_UPLOAD_COMPAT:
+		cmd = UI_END_FF_UPLOAD;
+		break;
+	}
 
 	return uinput_ioctl_handler(file, cmd, arg, compat_ptr(arg));
 }

[PATCH 4.9 007/102] apparmor: enforce nullbyte at end of tag string

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 8404d7a674c49278607d19726e0acc0cae299357 upstream.

A packed AppArmor policy contains null-terminated tag strings that are read
by unpack_nameX(). However, unpack_nameX() uses string functions on them
without ensuring that they are actually null-terminated, potentially
leading to out-of-bounds accesses.

Make sure that the tag string is null-terminated before passing it to
strcmp().

Cc: stable@vger.kernel.org
Fixes: 736ec752d95e ("AppArmor: policy routines for loading and unpacking policy")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/apparmor/policy_unpack.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/apparmor/policy_unpack.c
+++ b/security/apparmor/policy_unpack.c
@@ -177,7 +177,7 @@ static bool unpack_nameX(struct aa_ext *
 		char *tag = NULL;
 		size_t size = unpack_u16_chunk(e, &tag);
 		/* if a name is specified it must match. otherwise skip tag */
-		if (name && (!size || strcmp(name, tag)))
+		if (name && (!size || tag[size-1] != '\0' || strcmp(name, tag)))
 			goto fail;
 	} else if (name) {
 		/* if a name is specified and there is no name tag fail */

[PATCH 4.9 008/102] ARC: fix build warnings with !CONFIG_KPROBES

[Greg Kroah-Hartman]

[ Upstream commit 4c6fabda1ad1dec6d274c098ef0a91809c74f2e3 ]

|   CC      lib/nmi_backtrace.o
| In file included from ../include/linux/kprobes.h:43:0,
|                  from ../lib/nmi_backtrace.c:17:
| ../arch/arc/include/asm/kprobes.h:57:13: warning: 'trap_is_kprobe' defined but not used [-Wunused-function]
|  static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
|              ^~~~~~~~~~~~~~

The warning started with 7d134b2ce6 ("kprobes: move kprobe declarations
to asm-generic/kprobes.h") which started including <asm/kprobes.h>
unconditionally into <linux/kprobes.h> exposing a stub function for
!CONFIG_KPROBES to rest of world. Fix that by making the stub a macro

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/include/asm/cmpxchg.h | 14 ++++++++++----
 arch/arc/mm/tlb.c              | 13 ++++++++-----
 2 files changed, 18 insertions(+), 9 deletions(-)

diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index d819de1c5d10..3ea4112c8302 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -92,8 +92,11 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
 
 #endif /* CONFIG_ARC_HAS_LLSC */
 
-#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
-				(unsigned long)(o), (unsigned long)(n)))
+#define cmpxchg(ptr, o, n) ({				\
+	(typeof(*(ptr)))__cmpxchg((ptr),		\
+				  (unsigned long)(o),	\
+				  (unsigned long)(n));	\
+})
 
 /*
  * atomic_cmpxchg is same as cmpxchg
@@ -198,8 +201,11 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
 	return __xchg_bad_pointer();
 }
 
-#define xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
-						 sizeof(*(ptr))))
+#define xchg(ptr, with) ({				\
+	(typeof(*(ptr)))__xchg((unsigned long)(with),	\
+			       (ptr),			\
+			       sizeof(*(ptr)));		\
+})
 
 #endif /* CONFIG_ARC_PLAT_EZNPS */
 
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index a4dc881da277..3c88ccbe01af 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -890,9 +890,11 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			  struct pt_regs *regs)
 {
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	unsigned int pd0[mmu->ways];
 	unsigned long flags;
-	int set;
+	int set, n_ways = mmu->ways;
+
+	n_ways = min(n_ways, 4);
+	BUG_ON(mmu->ways > 4);
 
 	local_irq_save(flags);
 
@@ -900,9 +902,10 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 	for (set = 0; set < mmu->sets; set++) {
 
 		int is_valid, way;
+		unsigned int pd0[4];
 
 		/* read out all the ways of current set */
-		for (way = 0, is_valid = 0; way < mmu->ways; way++) {
+		for (way = 0, is_valid = 0; way < n_ways; way++) {
 			write_aux_reg(ARC_REG_TLBINDEX,
 					  SET_WAY_TO_IDX(mmu, set, way));
 			write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead);
@@ -916,14 +919,14 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			continue;
 
 		/* Scan the set for duplicate ways: needs a nested loop */
-		for (way = 0; way < mmu->ways - 1; way++) {
+		for (way = 0; way < n_ways - 1; way++) {
 
 			int n;
 
 			if (!pd0[way])
 				continue;
 
-			for (n = way + 1; n < mmu->ways; n++) {
+			for (n = way + 1; n < n_ways; n++) {
 				if (pd0[way] != pd0[n])
 					continue;
 
-- 
2.20.1

[PATCH 4.9 009/102] parport: Fix mem leak in parport_register_dev_model

[Greg Kroah-Hartman]

[ Upstream commit 1c7ebeabc9e5ee12e42075a597de40fdb9059530 ]

BUG: memory leak
unreferenced object 0xffff8881df48cda0 (size 16):
  comm "syz-executor.0", pid 5077, jiffies 4295994670 (age 22.280s)
  hex dump (first 16 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d2d0d5fe>] parport_register_dev_model+0x141/0x6e0 [parport]
    [<00000000782f6dab>] 0xffffffffc15d1196
    [<00000000d2ca6ae4>] platform_drv_probe+0x7e/0x100
    [<00000000628c2a94>] really_probe+0x342/0x4d0
    [<000000006874f5da>] driver_probe_device+0x8c/0x170
    [<00000000424de37a>] __device_attach_driver+0xda/0x100
    [<000000002acab09a>] bus_for_each_drv+0xfe/0x170
    [<000000003d9e5f31>] __device_attach+0x190/0x230
    [<0000000035d32f80>] bus_probe_device+0x123/0x140
    [<00000000a05ba627>] device_add+0x7cc/0xce0
    [<000000003f7560bf>] platform_device_add+0x230/0x3c0
    [<000000002a0be07d>] 0xffffffffc15d0949
    [<000000007361d8d2>] port_check+0x3b/0x50 [parport]
    [<000000004d67200f>] bus_for_each_dev+0x115/0x180
    [<000000003ccfd11c>] __parport_register_driver+0x1f0/0x210 [parport]
    [<00000000987f06fc>] 0xffffffffc15d803e

After commit 4e5a74f1db8d ("parport: Revert "parport: fix
memory leak""), free_pardevice do not free par_dev->state,
we should free it in error path of parport_register_dev_model
before return.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 4e5a74f1db8d ("parport: Revert "parport: fix memory leak"")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/parport/share.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index 4399de34054a..daa2eb3050df 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -895,6 +895,7 @@ parport_register_dev_model(struct parport *port, const char *name,
 	par_dev->devmodel = true;
 	ret = device_register(&par_dev->dev);
 	if (ret) {
+		kfree(par_dev->state);
 		put_device(&par_dev->dev);
 		goto err_put_port;
 	}
@@ -912,6 +913,7 @@ parport_register_dev_model(struct parport *port, const char *name,
 			spin_unlock(&port->physport->pardevice_lock);
 			pr_debug("%s: cannot grant exclusive access for device %s\n",
 				 port->name, name);
+			kfree(par_dev->state);
 			device_unregister(&par_dev->dev);
 			goto err_put_port;
 		}
-- 
2.20.1

[PATCH 4.9 010/102] parisc: Fix compiler warnings in float emulation code

[Greg Kroah-Hartman]

[ Upstream commit 6b98d9134e14f5ef4bcf64b27eedf484ed19a1ec ]

Avoid such compiler warnings:
arch/parisc/math-emu/cnv_float.h:71:27: warning: ‘<<’ in boolean context, did you mean ‘<’ ? [-Wint-in-bool-context]
     ((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) || Dintp2(dint_valueB))
arch/parisc/math-emu/fcnvxf.c:257:6: note: in expansion of macro ‘Dint_isinexact_to_sgl’
  if (Dint_isinexact_to_sgl(srcp1,srcp2)) {

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/math-emu/cnv_float.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/parisc/math-emu/cnv_float.h b/arch/parisc/math-emu/cnv_float.h
index 933423fa5144..b0db61188a61 100644
--- a/arch/parisc/math-emu/cnv_float.h
+++ b/arch/parisc/math-emu/cnv_float.h
@@ -60,19 +60,19 @@
     ((exponent < (SGL_P - 1)) ?				\
      (Sall(sgl_value) << (SGL_EXP_LENGTH + 1 + exponent)) : FALSE)
 
-#define Int_isinexact_to_sgl(int_value)	(int_value << 33 - SGL_EXP_LENGTH)
+#define Int_isinexact_to_sgl(int_value)	((int_value << 33 - SGL_EXP_LENGTH) != 0)
 
 #define Sgl_roundnearest_from_int(int_value,sgl_value)			\
     if (int_value & 1<<(SGL_EXP_LENGTH - 2))   /* round bit */		\
-    	if ((int_value << 34 - SGL_EXP_LENGTH) || Slow(sgl_value))	\
+	if (((int_value << 34 - SGL_EXP_LENGTH) != 0) || Slow(sgl_value)) \
 		Sall(sgl_value)++
 
 #define Dint_isinexact_to_sgl(dint_valueA,dint_valueB)		\
-    ((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) || Dintp2(dint_valueB))
+    (((Dintp1(dint_valueA) << 33 - SGL_EXP_LENGTH) != 0) || Dintp2(dint_valueB))
 
 #define Sgl_roundnearest_from_dint(dint_valueA,dint_valueB,sgl_value)	\
     if (Dintp1(dint_valueA) & 1<<(SGL_EXP_LENGTH - 2)) 			\
-    	if ((Dintp1(dint_valueA) << 34 - SGL_EXP_LENGTH) ||		\
+	if (((Dintp1(dint_valueA) << 34 - SGL_EXP_LENGTH) != 0) ||	\
     	Dintp2(dint_valueB) || Slow(sgl_value)) Sall(sgl_value)++
 
 #define Dint_isinexact_to_dbl(dint_value) 	\
-- 
2.20.1

[PATCH 4.9 011/102] IB/rdmavt: Fix alloc_qpn() WARN_ON()

[Greg Kroah-Hartman]

[ Upstream commit 2abae62a26a265129b364d8c1ef3be55e2c01309 ]

The qpn allocation logic has a WARN_ON() that intends to detect the use of
an index that will introduce bits in the lower order bits of the QOS bits
in the QPN.

Unfortunately, it has the following bugs:
- it misfires when wrapping QPN allocation for non-QOS
- it doesn't correctly detect low order QOS bits (despite the comment)

The WARN_ON() should not be applied to non-QOS (qos_shift == 1).

Additionally, it SHOULD test the qpn bits per the table below:

2 data VLs:   [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^
              [  0,   0,   0,   0,   0,   0, sc0],  qp bit 1 always 0*
3-4 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^
              [  0,   0,   0,   0,   0, sc1, sc0], qp bits [21] always 0
5-8 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^
              [  0,   0,   0,   0, sc2, sc1, sc0] qp bits [321] always 0

Fix by qualifying the warning for qos_shift > 1 and producing the correct
mask to insure the above bits are zero without generating a superfluous
warning.

Fixes: 501edc42446e ("IB/rdmavt: Correct warning during QPN allocation")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rdmavt/qp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c
index 6500c3b5a89c..8b330b53d636 100644
--- a/drivers/infiniband/sw/rdmavt/qp.c
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -370,7 +370,8 @@ static int alloc_qpn(struct rvt_dev_info *rdi, struct rvt_qpn_table *qpt,
 			offset = qpt->incr | ((offset & 1) ^ 1);
 		}
 		/* there can be no set bits in low-order QoS bits */
-		WARN_ON(offset & (BIT(rdi->dparms.qos_shift) - 1));
+		WARN_ON(rdi->dparms.qos_shift > 1 &&
+			offset & ((BIT(rdi->dparms.qos_shift - 1) - 1) << 1));
 		qpn = mk_qpn(qpt, map, offset);
 	}
 
-- 
2.20.1

[PATCH 4.9 012/102] IB/hfi1: Insure freeze_work work_struct is canceled on shutdown

[Greg Kroah-Hartman]

[ Upstream commit 6d517353c70bb0818b691ca003afdcb5ee5ea44e ]

By code inspection, the freeze_work is never canceled.

Fix by adding a cancel_work_sync in the shutdown path to insure it is no
longer running.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/chip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index d30b3b908621..85db856047a9 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -9620,6 +9620,7 @@ void hfi1_quiet_serdes(struct hfi1_pportdata *ppd)
 
 	/* disable the port */
 	clear_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK);
+	cancel_work_sync(&ppd->freeze_work);
 }
 
 static inline int init_cpu_counters(struct hfi1_devdata *dd)
-- 
2.20.1

[PATCH 4.9 013/102] IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value

[Greg Kroah-Hartman]

[ Upstream commit 35164f5259a47ea756fa1deb3e463ac2a4f10dc9 ]

The command 'ibv_devinfo -v' reports 0 for max_mr.

Fix by assigning the query values after the mr lkey_table has been built
rather than early on in the driver.

Fixes: 7b1e2099adc8 ("IB/rdmavt: Move memory registration into rdmavt")
Reviewed-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/verbs.c    | 2 --
 drivers/infiniband/hw/qib/qib_verbs.c | 2 --
 drivers/infiniband/sw/rdmavt/mr.c     | 2 ++
 3 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/verbs.c b/drivers/infiniband/hw/hfi1/verbs.c
index d9c71750e22d..15054a0cbf6d 100644
--- a/drivers/infiniband/hw/hfi1/verbs.c
+++ b/drivers/infiniband/hw/hfi1/verbs.c
@@ -1344,8 +1344,6 @@ static void hfi1_fill_device_attr(struct hfi1_devdata *dd)
 	rdi->dparms.props.max_cq = hfi1_max_cqs;
 	rdi->dparms.props.max_ah = hfi1_max_ahs;
 	rdi->dparms.props.max_cqe = hfi1_max_cqes;
-	rdi->dparms.props.max_mr = rdi->lkey_table.max;
-	rdi->dparms.props.max_fmr = rdi->lkey_table.max;
 	rdi->dparms.props.max_map_per_fmr = 32767;
 	rdi->dparms.props.max_pd = hfi1_max_pds;
 	rdi->dparms.props.max_qp_rd_atom = HFI1_MAX_RDMA_ATOMIC;
diff --git a/drivers/infiniband/hw/qib/qib_verbs.c b/drivers/infiniband/hw/qib/qib_verbs.c
index 954f15064514..d6e183775e24 100644
--- a/drivers/infiniband/hw/qib/qib_verbs.c
+++ b/drivers/infiniband/hw/qib/qib_verbs.c
@@ -1568,8 +1568,6 @@ static void qib_fill_device_attr(struct qib_devdata *dd)
 	rdi->dparms.props.max_cq = ib_qib_max_cqs;
 	rdi->dparms.props.max_cqe = ib_qib_max_cqes;
 	rdi->dparms.props.max_ah = ib_qib_max_ahs;
-	rdi->dparms.props.max_mr = rdi->lkey_table.max;
-	rdi->dparms.props.max_fmr = rdi->lkey_table.max;
 	rdi->dparms.props.max_map_per_fmr = 32767;
 	rdi->dparms.props.max_qp_rd_atom = QIB_MAX_RDMA_ATOMIC;
 	rdi->dparms.props.max_qp_init_rd_atom = 255;
diff --git a/drivers/infiniband/sw/rdmavt/mr.c b/drivers/infiniband/sw/rdmavt/mr.c
index 49d55a0322f6..dbd4c0d268e9 100644
--- a/drivers/infiniband/sw/rdmavt/mr.c
+++ b/drivers/infiniband/sw/rdmavt/mr.c
@@ -94,6 +94,8 @@ int rvt_driver_mr_init(struct rvt_dev_info *rdi)
 	for (i = 0; i < rdi->lkey_table.max; i++)
 		RCU_INIT_POINTER(rdi->lkey_table.table[i], NULL);
 
+	rdi->dparms.props.max_mr = rdi->lkey_table.max;
+	rdi->dparms.props.max_fmr = rdi->lkey_table.max;
 	return 0;
 }
 
-- 
2.20.1

[PATCH 4.9 014/102] MIPS: uprobes: remove set but not used variable epc

[Greg Kroah-Hartman]

[ Upstream commit f532beeeff0c0a3586cc15538bc52d249eb19e7c ]

Fixes gcc '-Wunused-but-set-variable' warning:

arch/mips/kernel/uprobes.c: In function 'arch_uprobe_pre_xol':
arch/mips/kernel/uprobes.c:115:17: warning: variable 'epc' set but not used [-Wunused-but-set-variable]

It's never used since introduction in
commit 40e084a506eb ("MIPS: Add uprobes support.")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <linux-mips@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/uprobes.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/mips/kernel/uprobes.c b/arch/mips/kernel/uprobes.c
index dbb917403131..ec951dde0999 100644
--- a/arch/mips/kernel/uprobes.c
+++ b/arch/mips/kernel/uprobes.c
@@ -111,9 +111,6 @@ int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs)
 	 */
 	aup->resume_epc = regs->cp0_epc + 4;
 	if (insn_has_delay_slot((union mips_instruction) aup->insn[0])) {
-		unsigned long epc;
-
-		epc = regs->cp0_epc;
 		__compute_return_epc_for_insn(regs,
 			(union mips_instruction) aup->insn[0]);
 		aup->resume_epc = regs->cp0_epc;
-- 
2.20.1

[PATCH 4.9 015/102] net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0

[Greg Kroah-Hartman]

[ Upstream commit 62394708f3e01c9f2be6be74eb6305bae1ed924f ]

When non-bridged, non-vlan'ed mv88e6xxx port is moving down, error
message is logged:

failed to kill vid 0081/0 for device eth_cu_1000_4

This is caused by call from __vlan_vid_del() with vin set to zero, over
call chain this results into _mv88e6xxx_port_vlan_del() called with
vid=0, and mv88e6xxx_vtu_get() called from there returns -EINVAL.

On symmetric path moving port up, call goes through
mv88e6xxx_port_vlan_prepare() that calls mv88e6xxx_port_check_hw_vlan()
that returns -EOPNOTSUPP for zero vid.

This patch changes mv88e6xxx_vtu_get() to also return -EOPNOTSUPP for
zero vid, then this error code is explicitly cleared in
dsa_slave_vlan_rx_kill_vid() and error message is no longer logged.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index dc510069d37b..2edd193c96ab 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -1742,7 +1742,7 @@ static int _mv88e6xxx_vtu_get(struct mv88e6xxx_chip *chip, u16 vid,
 	int err;
 
 	if (!vid)
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
 	err = _mv88e6xxx_vtu_vid_write(chip, vid - 1);
 	if (err)
-- 
2.20.1

[PATCH 4.9 016/102] net: hns: Fix loopback test failed at copper ports

[Greg Kroah-Hartman]

[ Upstream commit 2e1f164861e500f4e068a9d909bbd3fcc7841483 ]

When doing a loopback test at copper ports, the serdes loopback
and the phy loopback will fail, because of the adjust link had
not finished, and phy not ready.

Adds sleep between adjust link and test process to fix it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index 4cd163390dcc..f38848c4f69d 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -367,6 +367,7 @@ static int __lb_setup(struct net_device *ndev,
 static int __lb_up(struct net_device *ndev,
 		   enum hnae_loop loop_mode)
 {
+#define NIC_LB_TEST_WAIT_PHY_LINK_TIME 300
 	struct hns_nic_priv *priv = netdev_priv(ndev);
 	struct hnae_handle *h = priv->ae_handle;
 	int speed, duplex;
@@ -393,6 +394,9 @@ static int __lb_up(struct net_device *ndev,
 
 	h->dev->ops->adjust_link(h, speed, duplex);
 
+	/* wait adjust link done and phy ready */
+	msleep(NIC_LB_TEST_WAIT_PHY_LINK_TIME);
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH 4.9 017/102] sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD

[Greg Kroah-Hartman]

[ Upstream commit 56cd0aefa475079e9613085b14a0f05037518fed ]

The PERF_EVENT_IOC_PERIOD ioctl command can be used to change the
sample period of a running perf_event. Consequently, when calculating
the next event period, the new period will only be considered after the
previous one has overflowed.

This patch changes the calculation of the remaining event ticks so that
they are offset if the period has changed.

See commit 3581fe0ef37c ("ARM: 7556/1: perf: fix updated event period in
response to PERF_EVENT_IOC_PERIOD") for details.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/perf_event.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 71e7f77f6776..84a80cd004eb 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -889,6 +889,10 @@ static int sparc_perf_event_set_period(struct perf_event *event,
 	s64 period = hwc->sample_period;
 	int ret = 0;
 
+	/* The period may have been changed by PERF_EVENT_IOC_PERIOD */
+	if (unlikely(period != hwc->last_period))
+		left = period - (hwc->last_period - left);
+
 	if (unlikely(left <= -period)) {
 		left = period;
 		local64_set(&hwc->period_left, left);
-- 
2.20.1

[PATCH 4.9 018/102] net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported

[Greg Kroah-Hartman]

[ Upstream commit 9e4f56f1a7f3287718d0083b5cb85298dc05a5fd ]

Should hw_feature as hardware capability flags to check if hardware LRO
got support.

Signed-off-by: Mark Lee <mark-mc.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 20de37a414fe..03b599109619 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2175,13 +2175,13 @@ static int mtk_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 
 	switch (cmd->cmd) {
 	case ETHTOOL_GRXRINGS:
-		if (dev->features & NETIF_F_LRO) {
+		if (dev->hw_features & NETIF_F_LRO) {
 			cmd->data = MTK_MAX_RX_RING_NUM;
 			ret = 0;
 		}
 		break;
 	case ETHTOOL_GRXCLSRLCNT:
-		if (dev->features & NETIF_F_LRO) {
+		if (dev->hw_features & NETIF_F_LRO) {
 			struct mtk_mac *mac = netdev_priv(dev);
 
 			cmd->rule_cnt = mac->hwlro_ip_cnt;
@@ -2189,11 +2189,11 @@ static int mtk_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 		}
 		break;
 	case ETHTOOL_GRXCLSRULE:
-		if (dev->features & NETIF_F_LRO)
+		if (dev->hw_features & NETIF_F_LRO)
 			ret = mtk_hwlro_get_fdir_entry(dev, cmd);
 		break;
 	case ETHTOOL_GRXCLSRLALL:
-		if (dev->features & NETIF_F_LRO)
+		if (dev->hw_features & NETIF_F_LRO)
 			ret = mtk_hwlro_get_fdir_all(dev, cmd,
 						     rule_locs);
 		break;
@@ -2210,11 +2210,11 @@ static int mtk_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 
 	switch (cmd->cmd) {
 	case ETHTOOL_SRXCLSRLINS:
-		if (dev->features & NETIF_F_LRO)
+		if (dev->hw_features & NETIF_F_LRO)
 			ret = mtk_hwlro_add_ipaddr(dev, cmd);
 		break;
 	case ETHTOOL_SRXCLSRLDEL:
-		if (dev->features & NETIF_F_LRO)
+		if (dev->hw_features & NETIF_F_LRO)
 			ret = mtk_hwlro_del_ipaddr(dev, cmd);
 		break;
 	default:
-- 
2.20.1

[PATCH 4.9 019/102] net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled

[Greg Kroah-Hartman]

[ Upstream commit 880c2d4b2fdfd580ebcd6bb7240a8027a1d34751 ]

Should only enable HW RX_2BYTE_OFFSET function in the case NET_IP_ALIGN
equals to 2.

Signed-off-by: Mark Lee <mark-mc.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 03b599109619..d10c8a8156bc 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1700,6 +1700,7 @@ static void mtk_poll_controller(struct net_device *dev)
 
 static int mtk_start_dma(struct mtk_eth *eth)
 {
+	u32 rx_2b_offset = (NET_IP_ALIGN == 2) ? MTK_RX_2B_OFFSET : 0;
 	int err;
 
 	err = mtk_dma_init(eth);
@@ -1714,7 +1715,7 @@ static int mtk_start_dma(struct mtk_eth *eth)
 		MTK_QDMA_GLO_CFG);
 
 	mtk_w32(eth,
-		MTK_RX_DMA_EN | MTK_RX_2B_OFFSET |
+		MTK_RX_DMA_EN | rx_2b_offset |
 		MTK_RX_BT_32DWORDS | MTK_MULTI_EN,
 		MTK_PDMA_GLO_CFG);
 
-- 
2.20.1

[PATCH 4.9 020/102] drm/arm/hdlcd: Allow a bit of clock tolerance

[Greg Kroah-Hartman]

[ Upstream commit 1c810739097fdeb31b393b67a0a1e3d7ffdd9f63 ]

On the Arm Juno platform, the HDLCD pixel clock is constrained to 250KHz
resolution in order to avoid the tiny System Control Processor spending
aeons trying to calculate exact PLL coefficients. This means that modes
like my oddball 1600x1200 with 130.89MHz clock get rejected since the
rate cannot be matched exactly. In practice, though, this mode works
quite happily with the clock at 131MHz, so let's relax the check to
allow a little bit of slop.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/arm/hdlcd_crtc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c
index 28341b32067f..84dea276175b 100644
--- a/drivers/gpu/drm/arm/hdlcd_crtc.c
+++ b/drivers/gpu/drm/arm/hdlcd_crtc.c
@@ -170,7 +170,8 @@ static int hdlcd_crtc_atomic_check(struct drm_crtc *crtc,
 	long rate, clk_rate = mode->clock * 1000;
 
 	rate = clk_round_rate(hdlcd->clk, clk_rate);
-	if (rate != clk_rate) {
+	/* 0.1% seems a close enough tolerance for the TDA19988 on Juno */
+	if (abs(rate - clk_rate) * 1000 > clk_rate) {
 		/* clock required by mode not supported by hardware */
 		return -EINVAL;
 	}
-- 
2.20.1

[PATCH 4.9 021/102] scripts/checkstack.pl: Fix arm64 wrong or unknown architecture

[Greg Kroah-Hartman]

[ Upstream commit 4f45d62a52297b10ded963412a158685647ecdec ]

The following error occurs for the `make ARCH=arm64 checkstack` case:

aarch64-linux-gnu-objdump -d vmlinux $(find . -name '*.ko') | \
perl ./scripts/checkstack.pl arm64
wrong or unknown architecture "arm64"

As suggested by Masahiro Yamada, fix the above error using regular
expressions in the same way it was fixed for the `ARCH=x86` case via
commit fda9f9903be6 ("scripts/checkstack.pl: automatically handle
32-bit and 64-bit mode for ARCH=x86").

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/checkstack.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index 12a6940741fe..b8f616545277 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -45,7 +45,7 @@ my (@stack, $re, $dre, $x, $xs, $funcre);
 	$x	= "[0-9a-f]";	# hex character
 	$xs	= "[0-9a-f ]";	# hex character or space
 	$funcre = qr/^$x* <(.*)>:$/;
-	if ($arch eq 'aarch64') {
+	if ($arch =~ '^(aarch|arm)64$') {
 		#ffffffc0006325cc:       a9bb7bfd        stp     x29, x30, [sp, #-80]!
 		$re = qr/^.*stp.*sp, \#-([0-9]{1,8})\]\!/o;
 	} elsif ($arch eq 'arm') {
-- 
2.20.1

[PATCH 4.9 022/102] scsi: ufs: Check that space was properly alloced in copy_query_response

[Greg Kroah-Hartman]

[ Upstream commit 1c90836f70f9a8ef7b7ad9e1fdd8961903e6ced6 ]

struct ufs_dev_cmd is the main container that supports device management
commands. In the case of a read descriptor request, we assume that the
proper space was allocated in dev_cmd to hold the returning descriptor.

This is no longer true, as there are flows that doesn't use dev_cmd for
device management requests, and was wrong in the first place.

Fixes: d44a5f98bb49 (ufs: query descriptor API)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 0fe4f8e8c8c9..a9c172692f21 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -941,7 +941,8 @@ int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE);
 
 	/* Get the descriptor */
-	if (lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) {
+	if (hba->dev_cmd.query.descriptor &&
+	    lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) {
 		u8 *descp = (u8 *)lrbp->ucd_rsp_ptr +
 				GENERAL_UPIU_REQUEST_SIZE;
 		u16 resp_len;
-- 
2.20.1

[PATCH 4.9 023/102] s390/qeth: fix VLAN attribute in bridge_hostnotify udev event

[Greg Kroah-Hartman]

[ Upstream commit 335726195e460cb6b3f795b695bfd31f0ea70ef0 ]

Enabling sysfs attribute bridge_hostnotify triggers a series of udev events
for the MAC addresses of all currently connected peers. In case no VLAN is
set for a peer, the device reports the corresponding MAC addresses with
VLAN ID 4096. This currently results in attribute VLAN=4096 for all
non-VLAN interfaces in the initial series of events after host-notify is
enabled.

Instead, no VLAN attribute should be reported in the udev event for
non-VLAN interfaces.

Only the initial events face this issue. For dynamic changes that are
reported later, the device uses a validity flag.

This also changes the code so that it now sets the VLAN attribute for
MAC addresses with VID 0. On Linux, no qeth interface will ever be
registered with VID 0: Linux kernel registers VID 0 on all network
interfaces initially, but qeth will drop .ndo_vlan_rx_add_vid for VID 0.
Peers with other OSs could register MACs with VID 0.

Fixes: 9f48b9db9a22 ("qeth: bridgeport support - address notifications")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_l2_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 58404e69aa4b..6ba4e921d2fd 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -2124,7 +2124,7 @@ static void qeth_bridgeport_an_set_cb(void *priv,
 
 	l2entry = (struct qdio_brinfo_entry_l2 *)entry;
 	code = IPA_ADDR_CHANGE_CODE_MACADDR;
-	if (l2entry->addr_lnid.lnid)
+	if (l2entry->addr_lnid.lnid < VLAN_N_VID)
 		code |= IPA_ADDR_CHANGE_CODE_VLANID;
 	qeth_bridge_emit_host_event(card, anev_reg_unreg, code,
 		(struct net_if_token *)&l2entry->nit,
-- 
2.20.1

[PATCH 4.9 024/102] hwmon: (pmbus/core) Treat parameters as paged if on multiple pages

[Greg Kroah-Hartman]

[ Upstream commit 4a60570dce658e3f8885bbcf852430b99f65aca5 ]

Some chips have attributes which exist on more than one page but the
attribute is not presently marked as paged. This causes the attributes
to be generated with the same label, which makes it impossible for
userspace to tell them apart.

Marking all such attributes as paged would result in the page suffix
being added regardless of whether they were present on more than one
page or not, which might break existing setups. Therefore, we add a
second check which treats the attribute as paged, even if not marked as
such, if it is present on multiple pages.

Fixes: b4ce237b7f7d ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers")
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/pmbus/pmbus_core.c | 34 ++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index c00bad02761a..0d75bc7b5065 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -1028,14 +1028,15 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 				      const struct pmbus_driver_info *info,
 				      const char *name,
 				      int index, int page,
-				      const struct pmbus_sensor_attr *attr)
+				      const struct pmbus_sensor_attr *attr,
+				      bool paged)
 {
 	struct pmbus_sensor *base;
 	int ret;
 
 	if (attr->label) {
 		ret = pmbus_add_label(data, name, index, attr->label,
-				      attr->paged ? page + 1 : 0);
+				      paged ? page + 1 : 0);
 		if (ret)
 			return ret;
 	}
@@ -1067,6 +1068,30 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 	return 0;
 }
 
+static bool pmbus_sensor_is_paged(const struct pmbus_driver_info *info,
+				  const struct pmbus_sensor_attr *attr)
+{
+	int p;
+
+	if (attr->paged)
+		return true;
+
+	/*
+	 * Some attributes may be present on more than one page despite
+	 * not being marked with the paged attribute. If that is the case,
+	 * then treat the sensor as being paged and add the page suffix to the
+	 * attribute name.
+	 * We don't just add the paged attribute to all such attributes, in
+	 * order to maintain the un-suffixed labels in the case where the
+	 * attribute is only on page 0.
+	 */
+	for (p = 1; p < info->pages; p++) {
+		if (info->func[p] & attr->func)
+			return true;
+	}
+	return false;
+}
+
 static int pmbus_add_sensor_attrs(struct i2c_client *client,
 				  struct pmbus_data *data,
 				  const char *name,
@@ -1080,14 +1105,15 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client,
 	index = 1;
 	for (i = 0; i < nattrs; i++) {
 		int page, pages;
+		bool paged = pmbus_sensor_is_paged(info, attrs);
 
-		pages = attrs->paged ? info->pages : 1;
+		pages = paged ? info->pages : 1;
 		for (page = 0; page < pages; page++) {
 			if (!(info->func[page] & attrs->func))
 				continue;
 			ret = pmbus_add_sensor_attrs_one(client, data, info,
 							 name, index, page,
-							 attrs);
+							 attrs, paged);
 			if (ret)
 				return ret;
 			index++;
-- 
2.20.1

[PATCH 4.9 025/102] nvme: Fix u32 overflow in the number of namespace list calculation

[Greg Kroah-Hartman]

[ Upstream commit c8e8c77b3bdbade6e26e8e76595f141ede12b692 ]

The Number of Namespaces (nn) field in the identify controller data structure is
defined as u32 and the maximum allowed value in NVMe specification is
0xFFFFFFFEUL. This change fixes the possible overflow of the DIV_ROUND_UP()
operation used in nvme_scan_ns_list() by casting the nn to u64.

Signed-off-by: Jaesoo Lee <jalee@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 979c6ecc6446..8705bfe7bb73 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1765,7 +1765,8 @@ static int nvme_scan_ns_list(struct nvme_ctrl *ctrl, unsigned nn)
 {
 	struct nvme_ns *ns;
 	__le32 *ns_list;
-	unsigned i, j, nsid, prev = 0, num_lists = DIV_ROUND_UP(nn, 1024);
+	unsigned i, j, nsid, prev = 0;
+	unsigned num_lists = DIV_ROUND_UP_ULL((u64)nn, 1024);
 	int ret = 0;
 
 	ns_list = kzalloc(0x1000, GFP_KERNEL);
-- 
2.20.1

[PATCH 4.9 026/102] btrfs: start readahead also in seed devices

[Greg Kroah-Hartman]

From: Naohiro Aota <naohiro.aota@wdc.com>

commit c4e0540d0ad49c8ceab06cceed1de27c4fe29f6e upstream.

Currently, btrfs does not consult seed devices to start readahead. As a
result, if readahead zone is added to the seed devices, btrfs_reada_wait()
indefinitely wait for the reada_ctl to finish.

You can reproduce the hung by modifying btrfs/163 to have larger initial
file size (e.g. xfs_io pwrite 4M instead of current 256K).

Fixes: 7414a03fbf9e ("btrfs: initial readahead code and prototypes")
Cc: stable@vger.kernel.org # 3.2+: ce7791ffee1e: Btrfs: fix race between readahead and device replace/removal
Cc: stable@vger.kernel.org # 3.2+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/reada.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/btrfs/reada.c
+++ b/fs/btrfs/reada.c
@@ -759,6 +759,7 @@ static void __reada_start_machine(struct
 	u64 total = 0;
 	int i;
 
+again:
 	do {
 		enqueued = 0;
 		mutex_lock(&fs_devices->device_list_mutex);
@@ -771,6 +772,10 @@ static void __reada_start_machine(struct
 		mutex_unlock(&fs_devices->device_list_mutex);
 		total += enqueued;
 	} while (enqueued && total < 10000);
+	if (fs_devices->seed) {
+		fs_devices = fs_devices->seed;
+		goto again;
+	}
 
 	if (enqueued == 0)
 		return;

[PATCH 4.9 027/102] can: flexcan: fix timeout when set small bitrate

[Greg Kroah-Hartman]

From: Joakim Zhang <qiangqing.zhang@nxp.com>

commit 247e5356a709eb49a0d95ff2a7f07dac05c8252c upstream.

Current we can meet timeout issue when setting a small bitrate like
10000 as follows on i.MX6UL EVK board (ipg clock = 66MHZ, per clock =
30MHZ):

| root@imx6ul7d:~# ip link set can0 up type can bitrate 10000

A link change request failed with some changes committed already.
Interface can0 may have been left with an inconsistent configuration,
please check.

| RTNETLINK answers: Connection timed out

It is caused by calling of flexcan_chip_unfreeze() timeout.

Originally the code is using usleep_range(10, 20) for unfreeze
operation, but the patch (8badd65 can: flexcan: avoid calling
usleep_range from interrupt context) changed it into udelay(10) which is
only a half delay of before, there're also some other delay changes.

After double to FLEXCAN_TIMEOUT_US to 100 can fix the issue.

Meanwhile, Rasmus Villemoes reported that even with a timeout of 100,
flexcan_probe() fails on the MPC8309, which requires a value of at least
140 to work reliably. 250 works for everyone.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/flexcan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -171,7 +171,7 @@
 #define FLEXCAN_MB_CNT_LENGTH(x)	(((x) & 0xf) << 16)
 #define FLEXCAN_MB_CNT_TIMESTAMP(x)	((x) & 0xffff)
 
-#define FLEXCAN_TIMEOUT_US		(50)
+#define FLEXCAN_TIMEOUT_US		(250)
 
 /* FLEXCAN hardware feature flags
  *

[PATCH 4.9 028/102] can: purge socket error queue on sock destruct

[Greg Kroah-Hartman]

From: Willem de Bruijn <willemb@google.com>

commit fd704bd5ee749d560e86c4f1fd2ef486d8abf7cf upstream.

CAN supports software tx timestamps as of the below commit. Purge
any queued timestamp packets on socket destroy.

Fixes: 51f31cabe3ce ("ip: support for TX timestamps on UDP and RAW sockets")
Reported-by: syzbot+a90604060cb40f5bdd16@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/can/af_can.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -113,6 +113,7 @@ EXPORT_SYMBOL(can_ioctl);
 static void can_sock_destruct(struct sock *sk)
 {
 	skb_queue_purge(&sk->sk_receive_queue);
+	skb_queue_purge(&sk->sk_error_queue);
 }
 
 static const struct can_proto *can_get_proto(int protocol)

[PATCH 4.9 029/102] powerpc/bpf: use unsigned division instruction for 64-bit operations

[Greg Kroah-Hartman]

From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>

commit 758f2046ea040773ae8ea7f72dd3bbd8fa984501 upstream.

BPF_ALU64 div/mod operations are currently using signed division, unlike
BPF_ALU32 operations. Fix the same. DIV64 and MOD64 overflow tests pass
with this fix.

Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/ppc-opcode.h |    1 +
 arch/powerpc/net/bpf_jit.h            |    2 +-
 arch/powerpc/net/bpf_jit_comp64.c     |    8 ++++----
 3 files changed, 6 insertions(+), 5 deletions(-)

--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -261,6 +261,7 @@
 #define PPC_INST_MULLI			0x1c000000
 #define PPC_INST_DIVWU			0x7c000396
 #define PPC_INST_DIVD			0x7c0003d2
+#define PPC_INST_DIVDU			0x7c000392
 #define PPC_INST_RLWINM			0x54000000
 #define PPC_INST_RLWIMI			0x50000000
 #define PPC_INST_RLDICL			0x78000000
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -116,7 +116,7 @@
 				     ___PPC_RA(a) | IMM_L(i))
 #define PPC_DIVWU(d, a, b)	EMIT(PPC_INST_DIVWU | ___PPC_RT(d) |	      \
 				     ___PPC_RA(a) | ___PPC_RB(b))
-#define PPC_DIVD(d, a, b)	EMIT(PPC_INST_DIVD | ___PPC_RT(d) |	      \
+#define PPC_DIVDU(d, a, b)	EMIT(PPC_INST_DIVDU | ___PPC_RT(d) |	      \
 				     ___PPC_RA(a) | ___PPC_RB(b))
 #define PPC_AND(d, a, b)	EMIT(PPC_INST_AND | ___PPC_RA(d) |	      \
 				     ___PPC_RS(a) | ___PPC_RB(b))
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -419,12 +419,12 @@ static int bpf_jit_build_body(struct bpf
 			PPC_LI(b2p[BPF_REG_0], 0);
 			PPC_JMP(exit_addr);
 			if (BPF_OP(code) == BPF_MOD) {
-				PPC_DIVD(b2p[TMP_REG_1], dst_reg, src_reg);
+				PPC_DIVDU(b2p[TMP_REG_1], dst_reg, src_reg);
 				PPC_MULD(b2p[TMP_REG_1], src_reg,
 						b2p[TMP_REG_1]);
 				PPC_SUB(dst_reg, dst_reg, b2p[TMP_REG_1]);
 			} else
-				PPC_DIVD(dst_reg, dst_reg, src_reg);
+				PPC_DIVDU(dst_reg, dst_reg, src_reg);
 			break;
 		case BPF_ALU | BPF_MOD | BPF_K: /* (u32) dst %= (u32) imm */
 		case BPF_ALU | BPF_DIV | BPF_K: /* (u32) dst /= (u32) imm */
@@ -452,7 +452,7 @@ static int bpf_jit_build_body(struct bpf
 				break;
 			case BPF_ALU64:
 				if (BPF_OP(code) == BPF_MOD) {
-					PPC_DIVD(b2p[TMP_REG_2], dst_reg,
+					PPC_DIVDU(b2p[TMP_REG_2], dst_reg,
 							b2p[TMP_REG_1]);
 					PPC_MULD(b2p[TMP_REG_1],
 							b2p[TMP_REG_1],
@@ -460,7 +460,7 @@ static int bpf_jit_build_body(struct bpf
 					PPC_SUB(dst_reg, dst_reg,
 							b2p[TMP_REG_1]);
 				} else
-					PPC_DIVD(dst_reg, dst_reg,
+					PPC_DIVDU(dst_reg, dst_reg,
 							b2p[TMP_REG_1]);
 				break;
 			}

[PATCH 4.9 030/102] ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

commit b25af2ff7c07bd19af74e3f64ff82e2880d13d81 upstream.

Since commit 1e434b703248 ("ARM: imx: update the cpu power up timing
setting on i.mx6sx") some characters loss is noticed on i.MX6ULL UART
as reported by Christoph Niedermaier.

The intention of such commit was to increase the SW2ISO field for i.MX6SX
only, but since cpuidle-imx6sx is also used on i.MX6UL/i.MX6ULL this caused
unintended side effects on other SoCs.

Fix this problem by keeping the original SW2ISO value for i.MX6UL/i.MX6ULL
and only increase SW2ISO in the i.MX6SX case.

Cc: stable@vger.kernel.org
Fixes: 1e434b703248 ("ARM: imx: update the cpu power up timing setting on i.mx6sx")
Reported-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-imx/cpuidle-imx6sx.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -15,6 +15,7 @@
 
 #include "common.h"
 #include "cpuidle.h"
+#include "hardware.h"
 
 static int imx6sx_idle_finish(unsigned long val)
 {
@@ -108,7 +109,7 @@ int __init imx6sx_cpuidle_init(void)
 	 * except for power up sw2iso which need to be
 	 * larger than LDO ramp up time.
 	 */
-	imx_gpc_set_arm_power_up_timing(0xf, 1);
+	imx_gpc_set_arm_power_up_timing(cpu_is_imx6sx() ? 0xf : 0x2, 1);
 	imx_gpc_set_arm_power_down_timing(1, 1);
 
 	return cpuidle_register(&imx6sx_cpuidle_driver, NULL);

[PATCH 4.9 031/102] Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

[Greg Kroah-Hartman]

From: Marcel Holtmann <marcel@holtmann.org>

commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.

The minimum encryption key size for LE connections is 56 bits and to
align LE with BR/EDR, enforce 56 bits of minimum encryption key size for
BR/EDR connections as well.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/bluetooth/hci_core.h |    3 +++
 net/bluetooth/hci_conn.c         |    8 ++++++++
 2 files changed, 11 insertions(+)

--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -176,6 +176,9 @@ struct adv_info {
 
 #define HCI_MAX_SHORT_NAME_LENGTH	10
 
+/* Min encryption key size to match with SMP */
+#define HCI_MIN_ENC_KEY_SIZE		7
+
 /* Default LE RPA expiry time, 15 minutes */
 #define HCI_DEFAULT_RPA_TIMEOUT		(15 * 60)
 
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1165,6 +1165,14 @@ int hci_conn_check_link_mode(struct hci_
 	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 		return 0;
 
+	/* The minimum encryption key size needs to be enforced by the
+	 * host stack before establishing any L2CAP connections. The
+	 * specification in theory allows a minimum of 1, but to align
+	 * BR/EDR and LE transports, a minimum of 7 is chosen.
+	 */
+	if (conn->enc_key_size < HCI_MIN_ENC_KEY_SIZE)
+		return 0;
+
 	return 1;
 }
 

[PATCH 4.9 032/102] Bluetooth: Fix regression with minimum encryption key size alignment

[Greg Kroah-Hartman]

From: Marcel Holtmann <marcel@holtmann.org>

commit 693cd8ce3f882524a5d06f7800dd8492411877b3 upstream.

When trying to align the minimum encryption key size requirement for
Bluetooth connections, it turns out doing this in a central location in
the HCI connection handling code is not possible.

Original Bluetooth version up to 2.0 used a security model where the
L2CAP service would enforce authentication and encryption.  Starting
with Bluetooth 2.1 and Secure Simple Pairing that model has changed into
that the connection initiator is responsible for providing an encrypted
ACL link before any L2CAP communication can happen.

Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and
before devices are causing a regression.  The encryption key size check
needs to be moved out of the HCI connection handling into the L2CAP
channel setup.

To achieve this, the current check inside hci_conn_security() has been
moved into l2cap_check_enc_key_size() helper function and then called
from four decisions point inside L2CAP to cover all combinations of
Secure Simple Pairing enabled devices and device using legacy pairing
and legacy service security model.

Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/hci_conn.c   |   18 +++++++++---------
 net/bluetooth/l2cap_core.c |   33 ++++++++++++++++++++++++++++-----
 2 files changed, 37 insertions(+), 14 deletions(-)

--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1165,14 +1165,6 @@ int hci_conn_check_link_mode(struct hci_
 	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 		return 0;
 
-	/* The minimum encryption key size needs to be enforced by the
-	 * host stack before establishing any L2CAP connections. The
-	 * specification in theory allows a minimum of 1, but to align
-	 * BR/EDR and LE transports, a minimum of 7 is chosen.
-	 */
-	if (conn->enc_key_size < HCI_MIN_ENC_KEY_SIZE)
-		return 0;
-
 	return 1;
 }
 
@@ -1289,8 +1281,16 @@ auth:
 		return 0;
 
 encrypt:
-	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
+	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags)) {
+		/* Ensure that the encryption key size has been read,
+		 * otherwise stall the upper layer responses.
+		 */
+		if (!conn->enc_key_size)
+			return 0;
+
+		/* Nothing else needed, all requirements are met */
 		return 1;
+	}
 
 	hci_conn_encrypt(conn);
 	return 0;
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1340,6 +1340,21 @@ static void l2cap_request_info(struct l2
 		       sizeof(req), &req);
 }
 
+static bool l2cap_check_enc_key_size(struct hci_conn *hcon)
+{
+	/* The minimum encryption key size needs to be enforced by the
+	 * host stack before establishing any L2CAP connections. The
+	 * specification in theory allows a minimum of 1, but to align
+	 * BR/EDR and LE transports, a minimum of 7 is chosen.
+	 *
+	 * This check might also be called for unencrypted connections
+	 * that have no key size requirements. Ensure that the link is
+	 * actually encrypted before enforcing a key size.
+	 */
+	return (!test_bit(HCI_CONN_ENCRYPT, &hcon->flags) ||
+		hcon->enc_key_size > HCI_MIN_ENC_KEY_SIZE);
+}
+
 static void l2cap_do_start(struct l2cap_chan *chan)
 {
 	struct l2cap_conn *conn = chan->conn;
@@ -1357,9 +1372,14 @@ static void l2cap_do_start(struct l2cap_
 	if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE))
 		return;
 
-	if (l2cap_chan_check_security(chan, true) &&
-	    __l2cap_no_conn_pending(chan))
+	if (!l2cap_chan_check_security(chan, true) ||
+	    !__l2cap_no_conn_pending(chan))
+		return;
+
+	if (l2cap_check_enc_key_size(conn->hcon))
 		l2cap_start_connection(chan);
+	else
+		__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 }
 
 static inline int l2cap_mode_supported(__u8 mode, __u32 feat_mask)
@@ -1438,7 +1458,10 @@ static void l2cap_conn_start(struct l2ca
 				continue;
 			}
 
-			l2cap_start_connection(chan);
+			if (l2cap_check_enc_key_size(conn->hcon))
+				l2cap_start_connection(chan);
+			else
+				l2cap_chan_close(chan, ECONNREFUSED);
 
 		} else if (chan->state == BT_CONNECT2) {
 			struct l2cap_conn_rsp rsp;
@@ -7447,7 +7470,7 @@ static void l2cap_security_cfm(struct hc
 		}
 
 		if (chan->state == BT_CONNECT) {
-			if (!status)
+			if (!status && l2cap_check_enc_key_size(hcon))
 				l2cap_start_connection(chan);
 			else
 				__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
@@ -7456,7 +7479,7 @@ static void l2cap_security_cfm(struct hc
 			struct l2cap_conn_rsp rsp;
 			__u16 res, stat;
 
-			if (!status) {
+			if (!status && l2cap_check_enc_key_size(hcon)) {
 				if (test_bit(FLAG_DEFER_SETUP, &chan->flags)) {
 					res = L2CAP_CR_PEND;
 					stat = L2CAP_CS_AUTHOR_PEND;

[PATCH 4.9 033/102] cfg80211: fix memory leak of wiphy device name

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 4f488fbca2a86cc7714a128952eead92cac279ab upstream.

In wiphy_new_nm(), if an error occurs after dev_set_name() and
device_initialize() have already been called, it's necessary to call
put_device() (via wiphy_free()) to avoid a memory leak.

Reported-by: syzbot+7fddca22578bc67c3fe4@syzkaller.appspotmail.com
Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -478,7 +478,7 @@ use_default_name:
 				   &rdev->rfkill_ops, rdev);
 
 	if (!rdev->rfkill) {
-		kfree(rdev);
+		wiphy_free(&rdev->wiphy);
 		return NULL;
 	}
 

[PATCH 4.9 034/102] mac80211: drop robust management frames from unknown TA

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 588f7d39b3592a36fb7702ae3b8bdd9be4621e2f upstream.

When receiving a robust management frame, drop it if we don't have
rx->sta since then we don't have a security association and thus
couldn't possibly validate the frame.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/rx.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3568,6 +3568,8 @@ static bool ieee80211_accept_frame(struc
 	case NL80211_IFTYPE_STATION:
 		if (!bssid && !sdata->u.mgd.use_4addr)
 			return false;
+		if (ieee80211_is_robust_mgmt_frame(skb) && !rx->sta)
+			return false;
 		if (multicast)
 			return true;
 		return ether_addr_equal(sdata->vif.addr, hdr->addr1);

[PATCH 4.9 035/102] mac80211: Do not use stack memory with scatterlist for GMAC

[Greg Kroah-Hartman]

From: Jouni Malinen <j@w1.fi>

commit a71fd9dac23613d96ba3c05619a8ef4fd6cdf9b9 upstream.

ieee80211_aes_gmac() uses the mic argument directly in sg_set_buf() and
that does not allow use of stack memory (e.g., BUG_ON() is hit in
sg_set_buf() with CONFIG_DEBUG_SG). BIP GMAC TX side is fine for this
since it can use the skb data buffer, but the RX side was using a stack
variable for deriving the local MIC value to compare against the
received one.

Fix this by allocating heap memory for the mic buffer.

This was found with hwsim test case ap_cipher_bip_gmac_128 hitting that
BUG_ON() and kernel panic.

Cc: stable@vger.kernel.org
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/wpa.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -1169,7 +1169,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	struct ieee80211_key *key = rx->key;
 	struct ieee80211_mmie_16 *mmie;
-	u8 aad[GMAC_AAD_LEN], mic[GMAC_MIC_LEN], ipn[6], nonce[GMAC_NONCE_LEN];
+	u8 aad[GMAC_AAD_LEN], *mic, ipn[6], nonce[GMAC_NONCE_LEN];
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 
 	if (!ieee80211_is_mgmt(hdr->frame_control))
@@ -1200,13 +1200,18 @@ ieee80211_crypto_aes_gmac_decrypt(struct
 		memcpy(nonce, hdr->addr2, ETH_ALEN);
 		memcpy(nonce + ETH_ALEN, ipn, 6);
 
+		mic = kmalloc(GMAC_MIC_LEN, GFP_ATOMIC);
+		if (!mic)
+			return RX_DROP_UNUSABLE;
 		if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce,
 				       skb->data + 24, skb->len - 24,
 				       mic) < 0 ||
 		    crypto_memneq(mic, mmie->mic, sizeof(mmie->mic))) {
 			key->u.aes_gmac.icverrors++;
+			kfree(mic);
 			return RX_DROP_UNUSABLE;
 		}
+		kfree(mic);
 	}
 
 	memcpy(key->u.aes_gmac.rx_pn, ipn, 6);

[PATCH 4.9 036/102] IB/hfi1: Avoid hardlockup with flushlist_lock

[Greg Kroah-Hartman]

commit cf131a81967583ae737df6383a0893b9fee75b4e upstream.

Heavy contention of the sde flushlist_lock can cause hard lockups at
extreme scale when the flushing logic is under stress.

Mitigate by replacing the item at a time copy to the local list with
an O(1) list_splice_init() and using the high priority work queue to
do the flushes.

Ported to linux-4.9.y.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/sdma.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/sdma.c b/drivers/infiniband/hw/hfi1/sdma.c
index 9cbe52d21077..76e63c88a87a 100644
--- a/drivers/infiniband/hw/hfi1/sdma.c
+++ b/drivers/infiniband/hw/hfi1/sdma.c
@@ -410,10 +410,7 @@ static void sdma_flush(struct sdma_engine *sde)
 	sdma_flush_descq(sde);
 	spin_lock_irqsave(&sde->flushlist_lock, flags);
 	/* copy flush list */
-	list_for_each_entry_safe(txp, txp_next, &sde->flushlist, list) {
-		list_del_init(&txp->list);
-		list_add_tail(&txp->list, &flushlist);
-	}
+	list_splice_init(&sde->flushlist, &flushlist);
 	spin_unlock_irqrestore(&sde->flushlist_lock, flags);
 	/* flush from flush list */
 	list_for_each_entry_safe(txp, txp_next, &flushlist, list)
@@ -2406,7 +2403,7 @@ int sdma_send_txreq(struct sdma_engine *sde,
 		wait->tx_count++;
 		wait->count += tx->num_desc;
 	}
-	schedule_work(&sde->flush_worker);
+	queue_work_on(sde->cpu, system_highpri_wq, &sde->flush_worker);
 	ret = -ECOMM;
 	goto unlock;
 nodesc:
@@ -2504,7 +2501,7 @@ int sdma_send_txlist(struct sdma_engine *sde, struct iowait *wait,
 		}
 	}
 	spin_unlock(&sde->flushlist_lock);
-	schedule_work(&sde->flush_worker);
+	queue_work_on(sde->cpu, system_highpri_wq, &sde->flush_worker);
 	ret = -ECOMM;
 	goto update_tail;
 nodesc:
-- 
2.20.1

[PATCH 4.9 037/102] perf ui helpline: Use strlcpy() as a shorter form of strncpy() + explicit set nul

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 4d0f16d059ddb91424480d88473f7392f24aebdc upstream.

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

In this case we are actually setting the null byte at the right place,
but since we pass the buffer size as the limit to strncpy() and not
it minus one, gcc ends up warning us about that, see below. So, lets
just switch to the shorter form provided by strlcpy().

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  ui/tui/helpline.c: In function 'tui_helpline__push':
  ui/tui/helpline.c:27:2: error: 'strncpy' specified bound 512 equals destination size [-Werror=stringop-truncation]
    strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: e6e904687949 ("perf ui: Introduce struct ui_helpline")
Link: https://lkml.kernel.org/n/tip-d1wz0hjjsh19xbalw69qpytj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/ui/tui/helpline.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/ui/tui/helpline.c
+++ b/tools/perf/ui/tui/helpline.c
@@ -23,7 +23,7 @@ static void tui_helpline__push(const cha
 	SLsmg_set_color(0);
 	SLsmg_write_nstring((char *)msg, SLtt_Screen_Cols);
 	SLsmg_refresh();
-	strncpy(ui_helpline__current, msg, sz)[sz - 1] = '\0';
+	strlcpy(ui_helpline__current, msg, sz);
 }
 
 static int tui_helpline__show(const char *format, va_list ap)

[PATCH 4.9 038/102] perf help: Remove needless use of strncpy()

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit b6313899f4ed2e76b8375cf8069556f5b94fbff0 upstream.

Since we make sure the destination buffer has at least strlen(orig) + 1,
no need to do a strncpy(dest, orig, strlen(orig)), just use strcpy(dest,
orig).

This silences this gcc 8.2 warning on Alpine Linux:

  In function 'add_man_viewer',
      inlined from 'perf_help_config' at builtin-help.c:284:3:
  builtin-help.c:192:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
    strncpy((*p)->name, name, len);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  builtin-help.c: In function 'perf_help_config':
  builtin-help.c:187:15: note: length computed here
    size_t len = strlen(name);
                 ^~~~~~~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 078006012401 ("perf_counter tools: add in basic glue from Git")
Link: https://lkml.kernel.org/n/tip-2f69l7drca427ob4km8i7kvo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/builtin-help.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -186,7 +186,7 @@ static void add_man_viewer(const char *n
 	while (*p)
 		p = &((*p)->next);
 	*p = zalloc(sizeof(**p) + len + 1);
-	strncpy((*p)->name, name, len);
+	strcpy((*p)->name, name);
 }
 
 static int supported_man_viewer(const char *name, size_t len)

[PATCH 4.9 039/102] perf header: Fix unchecked usage of strncpy()

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 5192bde7d98c99f2cd80225649e3c2e7493722f7 upstream.

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  util/header.c: In function 'perf_event__synthesize_event_update_name':
  util/header.c:3625:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
    strncpy(ev->data, evsel->name, len);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  util/header.c:3618:15: note: length computed here
    size_t len = strlen(evsel->name);
                 ^~~~~~~~~~~~~~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a6e5281780d1 ("perf tools: Add event_update event unit type")
Link: https://lkml.kernel.org/n/tip-wycz66iy8dl2z3yifgqf894p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/header.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -3027,7 +3027,7 @@ perf_event__synthesize_event_update_name
 	if (ev == NULL)
 		return -ENOMEM;
 
-	strncpy(ev->data, evsel->name, len);
+	strlcpy(ev->data, evsel->name, len + 1);
 	err = process(tool, (union perf_event*) ev, NULL, NULL);
 	free(ev);
 	return err;

[PATCH 4.9 040/102] 9p/rdma: do not disconnect on down_interruptible EAGAIN

[Greg Kroah-Hartman]

[ Upstream commit 8b894adb2b7e1d1e64b8954569c761eaf3d51ab5 ]

9p/rdma would sometimes drop the connection and display errors in
recv_done when the user does ^C.
The errors were caused by recv buffers that were posted at the time
of disconnect, and we just do not want to disconnect when
down_interruptible is... interrupted.

Link: http://lkml.kernel.org/r/1535625307-18019-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_rdma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 5a2ad4707463..9662c2747be7 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -454,7 +454,7 @@ static int rdma_request(struct p9_client *client, struct p9_req_t *req)
 
 	err = post_recv(client, rpl_context);
 	if (err) {
-		p9_debug(P9_DEBUG_FCALL, "POST RECV failed\n");
+		p9_debug(P9_DEBUG_ERROR, "POST RECV failed: %d\n", err);
 		goto recv_error;
 	}
 	/* remove posted receive buffer from request structure */
@@ -523,7 +523,7 @@ static int rdma_request(struct p9_client *client, struct p9_req_t *req)
  recv_error:
 	kfree(rpl_context);
 	spin_lock_irqsave(&rdma->req_lock, flags);
-	if (rdma->state < P9_RDMA_CLOSING) {
+	if (err != -EINTR && rdma->state < P9_RDMA_CLOSING) {
 		rdma->state = P9_RDMA_CLOSING;
 		spin_unlock_irqrestore(&rdma->req_lock, flags);
 		rdma_disconnect(rdma->cm_id);
-- 
2.20.1

[PATCH 4.9 041/102] 9p: acl: fix uninitialized iattr access

[Greg Kroah-Hartman]

[ Upstream commit e02a53d92e197706cad1627bd84705d4aa20a145 ]

iattr is passed to v9fs_vfs_setattr_dotl which does send various
values from iattr over the wire, even if it tells the server to
only look at iattr.ia_valid fields this could leak some stack data.

Link: http://lkml.kernel.org/r/1536339057-21974-2-git-send-email-asmadeus@codewreck.org
Addresses-Coverity-ID: 1195601 ("Uninitalized scalar variable")
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/9p/acl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/9p/acl.c b/fs/9p/acl.c
index 082d227fa56b..6261719f6f2a 100644
--- a/fs/9p/acl.c
+++ b/fs/9p/acl.c
@@ -276,7 +276,7 @@ static int v9fs_xattr_set_acl(const struct xattr_handler *handler,
 	switch (handler->flags) {
 	case ACL_TYPE_ACCESS:
 		if (acl) {
-			struct iattr iattr;
+			struct iattr iattr = { 0 };
 			struct posix_acl *old_acl = acl;
 
 			retval = posix_acl_update_mode(inode, &iattr.ia_mode, &acl);
-- 
2.20.1

[PATCH 4.9 042/102] 9p/rdma: remove useless check in cm_event_handler

[Greg Kroah-Hartman]

[ Upstream commit 473c7dd1d7b59ff8f88a5154737e3eac78a96e5b ]

the client c is always dereferenced to get the rdma struct, so c has to
be a valid pointer at this point.
Gcc would optimize that away but let's make coverity happy...

Link: http://lkml.kernel.org/r/1536339057-21974-3-git-send-email-asmadeus@codewreck.org
Addresses-Coverity-ID: 102778 ("Dereference before null check")
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_rdma.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 9662c2747be7..8e4313ad3f02 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -254,8 +254,7 @@ p9_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event)
 	case RDMA_CM_EVENT_DISCONNECTED:
 		if (rdma)
 			rdma->state = P9_RDMA_CLOSED;
-		if (c)
-			c->status = Disconnected;
+		c->status = Disconnected;
 		break;
 
 	case RDMA_CM_EVENT_TIMEWAIT_EXIT:
-- 
2.20.1

[PATCH 4.9 043/102] 9p: p9dirent_read: check network-provided name length

[Greg Kroah-Hartman]

[ Upstream commit ef5305f1f72eb1cfcda25c382bb0368509c0385b ]

strcpy to dirent->d_name could overflow the buffer, use strscpy to check
the provided string length and error out if the size was too big.

While we are here, make the function return an error when the pdu
parsing failed, instead of returning the pdu offset as if it had been a
success...

Link: http://lkml.kernel.org/r/1536339057-21974-4-git-send-email-asmadeus@codewreck.org
Addresses-Coverity-ID: 139133 ("Copy into fixed size buffer")
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/protocol.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index 7f1b45c082c9..ed1e39ccaebf 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -622,13 +622,19 @@ int p9dirent_read(struct p9_client *clnt, char *buf, int len,
 	if (ret) {
 		p9_debug(P9_DEBUG_9P, "<<< p9dirent_read failed: %d\n", ret);
 		trace_9p_protocol_dump(clnt, &fake_pdu);
-		goto out;
+		return ret;
 	}
 
-	strcpy(dirent->d_name, nameptr);
+	ret = strscpy(dirent->d_name, nameptr, sizeof(dirent->d_name));
+	if (ret < 0) {
+		p9_debug(P9_DEBUG_ERROR,
+			 "On the wire dirent name too long: %s\n",
+			 nameptr);
+		kfree(nameptr);
+		return ret;
+	}
 	kfree(nameptr);
 
-out:
 	return fake_pdu.offset;
 }
 EXPORT_SYMBOL(p9dirent_read);
-- 
2.20.1

[PATCH 4.9 044/102] net/9p: include trans_common.h to fix missing prototype warning.

[Greg Kroah-Hartman]

[ Upstream commit 52ad259eaac0454c1ac7123e7148cf8d6e6f5301 ]

This silences -Wmissing-prototypes when defining p9_release_pages.

Link: http://lkml.kernel.org/r/b1c4df8f21689b10d451c28fe38e860722d20e71.1542089696.git.dato@net.com.org.es
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_common.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/9p/trans_common.c b/net/9p/trans_common.c
index 38aa6345bdfa..9c0c894b56f8 100644
--- a/net/9p/trans_common.c
+++ b/net/9p/trans_common.c
@@ -14,6 +14,7 @@
 
 #include <linux/mm.h>
 #include <linux/module.h>
+#include "trans_common.h"
 
 /**
  *  p9_release_req_pages - Release pages after the transaction.
-- 
2.20.1

[PATCH 4.9 045/102] fs/proc/array.c: allow reporting eip/esp for all coredumping threads

[Greg Kroah-Hartman]

From: John Ogness <john.ogness@linutronix.de>

commit cb8f381f1613cafe3aec30809991cd56e7135d92 upstream.

0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in /proc/PID/stat")
stopped reporting eip/esp and fd7d56270b52 ("fs/proc: Report eip/esp in
/prod/PID/stat for coredumping") reintroduced the feature to fix a
regression with userspace core dump handlers (such as minicoredumper).

Because PF_DUMPCORE is only set for the primary thread, this didn't fix
the original problem for secondary threads.  Allow reporting the eip/esp
for all threads by checking for PF_EXITING as well.  This is set for all
the other threads when they are killed.  coredump_wait() waits for all the
tasks to become inactive before proceeding to invoke a core dumper.

Link: http://lkml.kernel.org/r/87y32p7i7a.fsf@linutronix.de
Link: http://lkml.kernel.org/r/20190522161614.628-1-jlu@pengutronix.de
Fixes: fd7d56270b526ca3 ("fs/proc: Report eip/esp in /prod/PID/stat for coredumping")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Jan Luebbe <jlu@pengutronix.de>
Tested-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/proc/array.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -448,7 +448,7 @@ static int do_task_stat(struct seq_file
 		 * a program is not able to use ptrace(2) in that case. It is
 		 * safe because the task has stopped executing permanently.
 		 */
-		if (permitted && (task->flags & PF_DUMPCORE)) {
+		if (permitted && (task->flags & (PF_EXITING|PF_DUMPCORE))) {
 			if (try_get_task_stack(task)) {
 				eip = KSTK_EIP(task);
 				esp = KSTK_ESP(task);

[PATCH 4.9 046/102] fs/binfmt_flat.c: make load_flat_shared_library() work

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 867bfa4a5fcee66f2b25639acae718e8b28b25a5 upstream.

load_flat_shared_library() is broken: It only calls load_flat_file() if
prepare_binprm() returns zero, but prepare_binprm() returns the number of
bytes read - so this only happens if the file is empty.

Instead, call into load_flat_file() if the number of bytes read is
non-negative. (Even if the number of bytes is zero - in that case,
load_flat_file() will see nullbytes and return a nice -ENOEXEC.)

In addition, remove the code related to bprm creds and stop using
prepare_binprm() - this code is loading a library, not a main executable,
and it only actually uses the members "buf", "file" and "filename" of the
linux_binprm struct. Instead, call kernel_read() directly.

Link: http://lkml.kernel.org/r/20190524201817.16509-1-jannh@google.com
Fixes: 287980e49ffc ("remove lots of IS_ERR_VALUE abuses")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/binfmt_flat.c |   23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -859,9 +859,14 @@ err:
 
 static int load_flat_shared_library(int id, struct lib_info *libs)
 {
+	/*
+	 * This is a fake bprm struct; only the members "buf", "file" and
+	 * "filename" are actually used.
+	 */
 	struct linux_binprm bprm;
 	int res;
 	char buf[16];
+	loff_t pos = 0;
 
 	memset(&bprm, 0, sizeof(bprm));
 
@@ -875,25 +880,11 @@ static int load_flat_shared_library(int
 	if (IS_ERR(bprm.file))
 		return res;
 
-	bprm.cred = prepare_exec_creds();
-	res = -ENOMEM;
-	if (!bprm.cred)
-		goto out;
-
-	/* We don't really care about recalculating credentials at this point
-	 * as we're past the point of no return and are dealing with shared
-	 * libraries.
-	 */
-	bprm.cred_prepared = 1;
-
-	res = prepare_binprm(&bprm);
+	res = kernel_read(bprm.file, pos, bprm.buf, BINPRM_BUF_SIZE);
 
-	if (!res)
+	if (res >= 0)
 		res = load_flat_file(&bprm, libs, id, NULL);
 
-	abort_creds(bprm.cred);
-
-out:
 	allow_write_access(bprm.file);
 	fput(bprm.file);
 

[PATCH 4.9 047/102] mm/page_idle.c: fix oops because end_pfn is larger than max_pfn

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit 7298e3b0a149c91323b3205d325e942c3b3b9ef6 upstream.

Currently the calcuation of end_pfn can round up the pfn number to more
than the actual maximum number of pfns, causing an Oops.  Fix this by
ensuring end_pfn is never more than max_pfn.

This can be easily triggered when on systems where the end_pfn gets
rounded up to more than max_pfn using the idle-page stress-ng stress test:

sudo stress-ng --idle-page 0

  BUG: unable to handle kernel paging request at 00000000000020d8
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 11039 Comm: stress-ng-idle- Not tainted 5.0.0-5-generic #6-Ubuntu
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
  RIP: 0010:page_idle_get_page+0xc8/0x1a0
  Code: 0f b1 0a 75 7d 48 8b 03 48 89 c2 48 c1 e8 33 83 e0 07 48 c1 ea 36 48 8d 0c 40 4c 8d 24 88 49 c1 e4 07 4c 03 24 d5 00 89 c3 be <49> 8b 44 24 58 48 8d b8 80 a1 02 00 e8 07 d5 77 00 48 8b 53 08 48
  RSP: 0018:ffffafd7c672fde8 EFLAGS: 00010202
  RAX: 0000000000000005 RBX: ffffe36341fff700 RCX: 000000000000000f
  RDX: 0000000000000284 RSI: 0000000000000275 RDI: 0000000001fff700
  RBP: ffffafd7c672fe00 R08: ffffa0bc34056410 R09: 0000000000000276
  R10: ffffa0bc754e9b40 R11: ffffa0bc330f6400 R12: 0000000000002080
  R13: ffffe36341fff700 R14: 0000000000080000 R15: ffffa0bc330f6400
  FS: 00007f0ec1ea5740(0000) GS:ffffa0bc7db00000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000020d8 CR3: 0000000077d68000 CR4: 00000000000006e0
  Call Trace:
    page_idle_bitmap_write+0x8c/0x140
    sysfs_kf_bin_write+0x5c/0x70
    kernfs_fop_write+0x12e/0x1b0
    __vfs_write+0x1b/0x40
    vfs_write+0xab/0x1b0
    ksys_write+0x55/0xc0
    __x64_sys_write+0x1a/0x20
    do_syscall_64+0x5a/0x110
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Link: http://lkml.kernel.org/r/20190618124352.28307-1-colin.king@canonical.com
Fixes: 33c3fc71c8cf ("mm: introduce idle page tracking")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_idle.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/mm/page_idle.c
+++ b/mm/page_idle.c
@@ -131,7 +131,7 @@ static ssize_t page_idle_bitmap_read(str
 
 	end_pfn = pfn + count * BITS_PER_BYTE;
 	if (end_pfn > max_pfn)
-		end_pfn = ALIGN(max_pfn, BITMAP_CHUNK_BITS);
+		end_pfn = max_pfn;
 
 	for (; pfn < end_pfn; pfn++) {
 		bit = pfn % BITMAP_CHUNK_BITS;
@@ -176,7 +176,7 @@ static ssize_t page_idle_bitmap_write(st
 
 	end_pfn = pfn + count * BITS_PER_BYTE;
 	if (end_pfn > max_pfn)
-		end_pfn = ALIGN(max_pfn, BITMAP_CHUNK_BITS);
+		end_pfn = max_pfn;
 
 	for (; pfn < end_pfn; pfn++) {
 		bit = pfn % BITMAP_CHUNK_BITS;

[PATCH 4.9 048/102] scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 240b4cc8fd5db138b675297d4226ec46594d9b3b upstream.

Once we unlock adapter->hw_lock in pvscsi_queue_lck() nothing prevents just
queued scsi_cmnd from completing and freeing the request. Thus cmd->cmnd[0]
dereference can dereference already freed request leading to kernel crashes
or other issues (which one of our customers observed). Store cmd->cmnd[0]
in a local variable before unlocking adapter->hw_lock to fix the issue.

CC: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/vmw_pvscsi.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -766,6 +766,7 @@ static int pvscsi_queue_lck(struct scsi_
 	struct pvscsi_adapter *adapter = shost_priv(host);
 	struct pvscsi_ctx *ctx;
 	unsigned long flags;
+	unsigned char op;
 
 	spin_lock_irqsave(&adapter->hw_lock, flags);
 
@@ -778,13 +779,14 @@ static int pvscsi_queue_lck(struct scsi_
 	}
 
 	cmd->scsi_done = done;
+	op = cmd->cmnd[0];
 
 	dev_dbg(&cmd->device->sdev_gendev,
-		"queued cmd %p, ctx %p, op=%x\n", cmd, ctx, cmd->cmnd[0]);
+		"queued cmd %p, ctx %p, op=%x\n", cmd, ctx, op);
 
 	spin_unlock_irqrestore(&adapter->hw_lock, flags);
 
-	pvscsi_kick_io(adapter, cmd->cmnd[0]);
+	pvscsi_kick_io(adapter, op);
 
 	return 0;
 }

[PATCH 4.9 049/102] x86/speculation: Allow guests to use SSBD even if host does not

[Greg Kroah-Hartman]

From: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>

commit c1f7fec1eb6a2c86d01bc22afce772c743451d88 upstream.

The bits set in x86_spec_ctrl_mask are used to calculate the guest's value
of SPEC_CTRL that is written to the MSR before VMENTRY, and control which
mitigations the guest can enable.  In the case of SSBD, unless the host has
enabled SSBD always on mode (by passing "spec_store_bypass_disable=on" in
the kernel parameters), the SSBD bit is not set in the mask and the guest
can not properly enable the SSBD always on mitigation mode.

This has been confirmed by running the SSBD PoC on a guest using the SSBD
always on mitigation mode (booted with kernel parameter
"spec_store_bypass_disable=on"), and verifying that the guest is vulnerable
unless the host is also using SSBD always on mode. In addition, the guest
OS incorrectly reports the SSB vulnerability as mitigated.

Always set the SSBD bit in x86_spec_ctrl_mask when the host CPU supports
it, allowing the guest to use SSBD whether or not the host has chosen to
enable the mitigation in any of its modes.

Fixes: be6fcb5478e9 ("x86/bugs: Rework spec_ctrl base and mask logic")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: bp@alien8.de
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1560187210-11054-1-git-send-email-alejandro.j.jimenez@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/bugs.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -829,6 +829,16 @@ static enum ssb_mitigation __init __ssb_
 	}
 
 	/*
+	 * If SSBD is controlled by the SPEC_CTRL MSR, then set the proper
+	 * bit in the mask to allow guests to use the mitigation even in the
+	 * case where the host does not enable it.
+	 */
+	if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) ||
+	    static_cpu_has(X86_FEATURE_AMD_SSBD)) {
+		x86_spec_ctrl_mask |= SPEC_CTRL_SSBD;
+	}
+
+	/*
 	 * We have three CPU feature flags that are in play here:
 	 *  - X86_BUG_SPEC_STORE_BYPASS - CPU is susceptible.
 	 *  - X86_FEATURE_SSBD - CPU is able to turn off speculative store bypass
@@ -845,7 +855,6 @@ static enum ssb_mitigation __init __ssb_
 			x86_amd_ssb_disable();
 		} else {
 			x86_spec_ctrl_base |= SPEC_CTRL_SSBD;
-			x86_spec_ctrl_mask |= SPEC_CTRL_SSBD;
 			wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
 		}
 	}

[PATCH 4.9 050/102] NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O

[Greg Kroah-Hartman]

From: Trond Myklebust <trondmy@gmail.com>

commit 68f461593f76bd5f17e87cdd0bea28f4278c7268 upstream.

Fix a typo where we're confusing the default TCP retrans value
(NFS_DEF_TCP_RETRANS) for the default TCP timeout value.

Fixes: 15d03055cf39f ("pNFS/flexfiles: Set reasonable default ...")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/flexfilelayout/flexfilelayoutdev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/flexfilelayout/flexfilelayoutdev.c
+++ b/fs/nfs/flexfilelayout/flexfilelayoutdev.c
@@ -17,7 +17,7 @@
 
 #define NFSDBG_FACILITY		NFSDBG_PNFS_LD
 
-static unsigned int dataserver_timeo = NFS_DEF_TCP_RETRANS;
+static unsigned int dataserver_timeo = NFS_DEF_TCP_TIMEO;
 static unsigned int dataserver_retrans;
 
 void nfs4_ff_layout_put_deviceid(struct nfs4_ff_layout_ds *mirror_ds)

[PATCH 4.9 051/102] cpu/speculation: Warn on unsupported mitigations= parameter

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert@linux-m68k.org>

commit 1bf72720281770162c87990697eae1ba2f1d917a upstream.

Currently, if the user specifies an unsupported mitigation strategy on the
kernel command line, it will be ignored silently.  The code will fall back
to the default strategy, possibly leaving the system more vulnerable than
expected.

This may happen due to e.g. a simple typo, or, for a stable kernel release,
because not all mitigation strategies have been backported.

Inform the user by printing a message.

Fixes: 98af8452945c5565 ("cpu/speculation: Add 'mitigations=' cmdline option")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190516070935.22546-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cpu.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -2245,6 +2245,9 @@ static int __init mitigations_parse_cmdl
 		cpu_mitigations = CPU_MITIGATIONS_AUTO;
 	else if (!strcmp(arg, "auto,nosmt"))
 		cpu_mitigations = CPU_MITIGATIONS_AUTO_NOSMT;
+	else
+		pr_crit("Unsupported mitigations=%s, system may still be vulnerable\n",
+			arg);
 
 	return 0;
 }

[PATCH 4.9 052/102] af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET

[Greg Kroah-Hartman]

From: Neil Horman <nhorman@tuxdriver.com>

[ Upstream commit 89ed5b519004a7706f50b70f611edbd3aaacff2c ]

When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel.  This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).

However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.

We can fix this by converting the schedule call to a completion
mechanism.  By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.

Tested by myself and the reporter, with good results

Change Notes:

V1->V2:
	Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)

V2->V3:
	Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status.  Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)

	Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)

V3->V4:
	Willem has requested that the control flow be restored to the
previous state.  Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call.  This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed.  To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.

	Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
	Clean up some extra newlines (Willem de Bruijn)

Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |   20 +++++++++++++++++---
 net/packet/internal.h  |    1 +
 2 files changed, 18 insertions(+), 3 deletions(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2399,6 +2399,9 @@ static void tpacket_destruct_skb(struct
 
 		ts = __packet_set_timestamp(po, ph, skb);
 		__packet_set_status(po, ph, TP_STATUS_AVAILABLE | ts);
+
+		if (!packet_read_pending(&po->tx_ring))
+			complete(&po->skb_completion);
 	}
 
 	sock_wfree(skb);
@@ -2629,7 +2632,7 @@ static int tpacket_parse_header(struct p
 
 static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
 {
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
 	struct net_device *dev;
 	struct virtio_net_hdr *vnet_hdr = NULL;
 	struct sockcm_cookie sockc;
@@ -2644,6 +2647,7 @@ static int tpacket_snd(struct packet_soc
 	int len_sum = 0;
 	int status = TP_STATUS_AVAILABLE;
 	int hlen, tlen, copylen = 0;
+	long timeo = 0;
 
 	mutex_lock(&po->pg_vec_lock);
 
@@ -2690,12 +2694,21 @@ static int tpacket_snd(struct packet_soc
 	if ((size_max > dev->mtu + reserve + VLAN_HLEN) && !po->has_vnet_hdr)
 		size_max = dev->mtu + reserve + VLAN_HLEN;
 
+	reinit_completion(&po->skb_completion);
+
 	do {
 		ph = packet_current_frame(po, &po->tx_ring,
 					  TP_STATUS_SEND_REQUEST);
 		if (unlikely(ph == NULL)) {
-			if (need_wait && need_resched())
-				schedule();
+			if (need_wait && skb) {
+				timeo = sock_sndtimeo(&po->sk, msg->msg_flags & MSG_DONTWAIT);
+				timeo = wait_for_completion_interruptible_timeout(&po->skb_completion, timeo);
+				if (timeo <= 0) {
+					err = !timeo ? -ETIMEDOUT : -ERESTARTSYS;
+					goto out_put;
+				}
+			}
+			/* check for additional frames */
 			continue;
 		}
 
@@ -3249,6 +3262,7 @@ static int packet_create(struct net *net
 	sock_init_data(sock, sk);
 
 	po = pkt_sk(sk);
+	init_completion(&po->skb_completion);
 	sk->sk_family = PF_PACKET;
 	po->num = proto;
 	po->xmit = dev_queue_xmit;
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
@@ -125,6 +125,7 @@ struct packet_sock {
 	unsigned int		tp_hdrlen;
 	unsigned int		tp_reserve;
 	unsigned int		tp_tstamp;
+	struct completion	skb_completion;
 	struct net_device __rcu	*cached_dev;
 	int			(*xmit)(struct sk_buff *skb);
 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;

[PATCH 4.9 053/102] net: stmmac: fixed new system time seconds value calculation

[Greg Kroah-Hartman]

From: Roland Hii <roland.king.guan.hii@intel.com>

[ Upstream commit a1e5388b4d5fc78688e5e9ee6641f779721d6291 ]

When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.

For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD

Previously, the 0x100000000 is mistakenly written as 100000000.

This is further simplified from
  sec = (0x100000000ULL - sec);
to
  sec = -sec;

Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -125,7 +125,7 @@ static int stmmac_adjust_systime(void __
 		 * programmed with (2^32 – <new_sec_value>)
 		 */
 		if (gmac4)
-			sec = (100000000ULL - sec);
+			sec = -sec;
 
 		value = readl(ioaddr + PTP_TCR);
 		if (value & PTP_TCR_TSCTRLSSR)

[PATCH 4.9 054/102] sctp: change to hold sk after auth shkey is created successfully

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 25bff6d5478b2a02368097015b7d8eb727c87e16 ]

Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,

Here to fix it by only holding the sk when auth shkey is created
successfully.

Fixes: a29a5bd4f5c3 ("[SCTP]: Implement SCTP-AUTH initializations.")
Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com
Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/endpointola.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -125,10 +125,6 @@ static struct sctp_endpoint *sctp_endpoi
 	/* Initialize the bind addr area */
 	sctp_bind_addr_init(&ep->base.bind_addr, 0);
 
-	/* Remember who we are attached to.  */
-	ep->base.sk = sk;
-	sock_hold(ep->base.sk);
-
 	/* Create the lists of associations.  */
 	INIT_LIST_HEAD(&ep->asocs);
 
@@ -165,6 +161,10 @@ static struct sctp_endpoint *sctp_endpoi
 	ep->auth_chunk_list = auth_chunks;
 	ep->prsctp_enable = net->sctp.prsctp_enable;
 
+	/* Remember who we are attached to.  */
+	ep->base.sk = sk;
+	sock_hold(ep->base.sk);
+
 	return ep;
 
 nomem_hmacs:

[PATCH 4.9 055/102] tipc: change to use register_pernet_device

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit c492d4c74dd3f87559883ffa0f94a8f1ae3fe5f5 ]

This patch is to fix a dst defcnt leak, which can be reproduced by doing:

  # ip net a c; ip net a s; modprobe tipc
  # ip net e s ip l a n eth1 type veth peer n eth1 netns c
  # ip net e c ip l s lo up; ip net e c ip l s eth1 up
  # ip net e s ip l s lo up; ip net e s ip l s eth1 up
  # ip net e c ip a a 1.1.1.2/8 dev eth1
  # ip net e s ip a a 1.1.1.1/8 dev eth1
  # ip net e c tipc b e m udp n u1 localip 1.1.1.2
  # ip net e s tipc b e m udp n u1 localip 1.1.1.1
  # ip net d c; ip net d s; rmmod tipc

and it will get stuck and keep logging the error:

  unregister_netdevice: waiting for lo to become free. Usage count = 1

The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx
path with udp_early_demux == 1, and this dst (eventually holding lo dev)
can't be released as bearer's removal in tipc pernet .exit happens after
lo dev's removal, default_device pernet .exit.

 "There are two distinct types of pernet_operations recognized: subsys and
  device.  At creation all subsys init functions are called before device
  init functions, and at destruction all device exit functions are called
  before subsys exit function."

So by calling register_pernet_device instead to register tipc_net_ops, the
pernet .exit() will be invoked earlier than loopback dev's removal when a
netns is being destroyed, as fou/gue does.

Note that vxlan and geneve udp tunnels don't have this issue, as the udp
sock is released in their device ndo_stop().

This fix is also necessary for tipc dst_cache, which will hold dsts on tx
path and I will introduce in my next patch.

Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/core.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -128,7 +128,7 @@ static int __init tipc_init(void)
 	if (err)
 		goto out_sysctl;
 
-	err = register_pernet_subsys(&tipc_net_ops);
+	err = register_pernet_device(&tipc_net_ops);
 	if (err)
 		goto out_pernet;
 
@@ -136,7 +136,7 @@ static int __init tipc_init(void)
 	if (err)
 		goto out_socket;
 
-	err = register_pernet_subsys(&tipc_topsrv_net_ops);
+	err = register_pernet_device(&tipc_topsrv_net_ops);
 	if (err)
 		goto out_pernet_topsrv;
 
@@ -147,11 +147,11 @@ static int __init tipc_init(void)
 	pr_info("Started in single node mode\n");
 	return 0;
 out_bearer:
-	unregister_pernet_subsys(&tipc_topsrv_net_ops);
+	unregister_pernet_device(&tipc_topsrv_net_ops);
 out_pernet_topsrv:
 	tipc_socket_stop();
 out_socket:
-	unregister_pernet_subsys(&tipc_net_ops);
+	unregister_pernet_device(&tipc_net_ops);
 out_pernet:
 	tipc_unregister_sysctl();
 out_sysctl:
@@ -166,9 +166,9 @@ out_netlink:
 static void __exit tipc_exit(void)
 {
 	tipc_bearer_cleanup();
-	unregister_pernet_subsys(&tipc_topsrv_net_ops);
+	unregister_pernet_device(&tipc_topsrv_net_ops);
 	tipc_socket_stop();
-	unregister_pernet_subsys(&tipc_net_ops);
+	unregister_pernet_device(&tipc_net_ops);
 	tipc_netlink_stop();
 	tipc_netlink_compat_stop();
 	tipc_unregister_sysctl();

[PATCH 4.9 056/102] tipc: check msg->req data len in tipc_nl_compat_bearer_disable

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 4f07b80c973348a99b5d2a32476a2e7877e94a05 ]

This patch is to fix an uninit-value issue, reported by syzbot:

  BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:981
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x191/0x1f0 lib/dump_stack.c:113
    kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
    __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
    memchr+0xce/0x110 lib/string.c:981
    string_is_valid net/tipc/netlink_compat.c:176 [inline]
    tipc_nl_compat_bearer_disable+0x2a1/0x480 net/tipc/netlink_compat.c:449
    __tipc_nl_compat_doit net/tipc/netlink_compat.c:327 [inline]
    tipc_nl_compat_doit+0x3ac/0xb00 net/tipc/netlink_compat.c:360
    tipc_nl_compat_handle net/tipc/netlink_compat.c:1178 [inline]
    tipc_nl_compat_recv+0x1b1b/0x27b0 net/tipc/netlink_compat.c:1281

TLV_GET_DATA_LEN() may return a negtive int value, which will be
used as size_t (becoming a big unsigned long) passed into memchr,
cause this issue.

Similar to what it does in tipc_nl_compat_bearer_enable(), this
fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in
tipc_nl_compat_bearer_disable(), as well as in
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().

v1->v2:
  - add the missing Fixes tags per Eric's request.

Fixes: 0762216c0ad2 ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable")
Fixes: 8b66fee7f8ee ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats")
Reported-by: syzbot+30eaa8bf392f7fafffaf@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/netlink_compat.c |   18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -436,7 +436,11 @@ static int tipc_nl_compat_bearer_disable
 	if (!bearer)
 		return -EMSGSIZE;
 
-	len = min_t(int, TLV_GET_DATA_LEN(msg->req), TIPC_MAX_BEARER_NAME);
+	len = TLV_GET_DATA_LEN(msg->req);
+	if (len <= 0)
+		return -EINVAL;
+
+	len = min_t(int, len, TIPC_MAX_BEARER_NAME);
 	if (!string_is_valid(name, len))
 		return -EINVAL;
 
@@ -528,7 +532,11 @@ static int tipc_nl_compat_link_stat_dump
 
 	name = (char *)TLV_DATA(msg->req);
 
-	len = min_t(int, TLV_GET_DATA_LEN(msg->req), TIPC_MAX_LINK_NAME);
+	len = TLV_GET_DATA_LEN(msg->req);
+	if (len <= 0)
+		return -EINVAL;
+
+	len = min_t(int, len, TIPC_MAX_BEARER_NAME);
 	if (!string_is_valid(name, len))
 		return -EINVAL;
 
@@ -806,7 +814,11 @@ static int tipc_nl_compat_link_reset_sta
 	if (!link)
 		return -EMSGSIZE;
 
-	len = min_t(int, TLV_GET_DATA_LEN(msg->req), TIPC_MAX_LINK_NAME);
+	len = TLV_GET_DATA_LEN(msg->req);
+	if (len <= 0)
+		return -EINVAL;
+
+	len = min_t(int, len, TIPC_MAX_BEARER_NAME);
 	if (!string_is_valid(name, len))
 		return -EINVAL;
 

[PATCH 4.9 057/102] tun: wake up waitqueues after IFF_UP is set

[Greg Kroah-Hartman]

From: Fei Li <lifei.shirley@bytedance.com>

[ Upstream commit 72b319dc08b4924a29f5e2560ef6d966fa54c429 ]

Currently after setting tap0 link up, the tun code wakes tx/rx waited
queues up in tun_net_open() when .ndo_open() is called, however the
IFF_UP flag has not been set yet. If there's already a wait queue, it
would fail to transmit when checking the IFF_UP flag in tun_sendmsg().
Then the saving vhost_poll_start() will add the wq into wqh until it
is waken up again. Although this works when IFF_UP flag has been set
when tun_chr_poll detects; this is not true if IFF_UP flag has not
been set at that time. Sadly the latter case is a fatal error, as
the wq will never be waken up in future unless later manually
setting link up on purpose.

Fix this by moving the wakeup process into the NETDEV_UP event
notifying process, this makes sure IFF_UP has been set before all
waited queues been waken up.

Signed-off-by: Fei Li <lifei.shirley@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/tun.c |   19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -828,18 +828,8 @@ static void tun_net_uninit(struct net_de
 /* Net device open. */
 static int tun_net_open(struct net_device *dev)
 {
-	struct tun_struct *tun = netdev_priv(dev);
-	int i;
-
 	netif_tx_start_all_queues(dev);
 
-	for (i = 0; i < tun->numqueues; i++) {
-		struct tun_file *tfile;
-
-		tfile = rtnl_dereference(tun->tfiles[i]);
-		tfile->socket.sk->sk_write_space(tfile->socket.sk);
-	}
-
 	return 0;
 }
 
@@ -2534,6 +2524,7 @@ static int tun_device_event(struct notif
 {
 	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
 	struct tun_struct *tun = netdev_priv(dev);
+	int i;
 
 	if (dev->rtnl_link_ops != &tun_link_ops)
 		return NOTIFY_DONE;
@@ -2543,6 +2534,14 @@ static int tun_device_event(struct notif
 		if (tun_queue_resize(tun))
 			return NOTIFY_BAD;
 		break;
+	case NETDEV_UP:
+		for (i = 0; i < tun->numqueues; i++) {
+			struct tun_file *tfile;
+
+			tfile = rtnl_dereference(tun->tfiles[i]);
+			tfile->socket.sk->sk_write_space(tfile->socket.sk);
+		}
+		break;
 	default:
 		break;
 	}

[PATCH 4.9 058/102] team: Always enable vlan tx offload

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit ee4297420d56a0033a8593e80b33fcc93fda8509 ]

We should rather have vlan_tci filled all the way down
to the transmitting netdevice and let it do the hw/sw
vlan implementation.

Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/team/team.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -2136,12 +2136,12 @@ static void team_setup(struct net_device
 	dev->features |= NETIF_F_NETNS_LOCAL;
 
 	dev->hw_features = TEAM_VLAN_FEATURES |
-			   NETIF_F_HW_VLAN_CTAG_TX |
 			   NETIF_F_HW_VLAN_CTAG_RX |
 			   NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	dev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
 	dev->features |= dev->hw_features;
+	dev->features |= NETIF_F_HW_VLAN_CTAG_TX;
 }
 
 static int team_newlink(struct net *src_net, struct net_device *dev,

[PATCH 4.9 059/102] bonding: Always enable vlan tx offload

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 30d8177e8ac776d89d387fad547af6a0f599210e ]

We build vlan on top of bonding interface, which vlan offload
is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is
BOND_XMIT_POLICY_ENCAP34.

Because vlan tx offload is off, vlan tci is cleared and skb push
the vlan header in validate_xmit_vlan() while sending from vlan
devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to
get information from protocol headers encapsulated within vlan,
because 'nhoff' is points to IP header, so bond hashing is based
on layer 2 info, which fails to distribute packets across slaves.

This patch always enable bonding's vlan tx offload, pass the vlan
packets to the slave devices with vlan tci, let them to handle
vlan implementation.

Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master")
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4241,12 +4241,12 @@ void bond_setup(struct net_device *bond_
 	bond_dev->features |= NETIF_F_NETNS_LOCAL;
 
 	bond_dev->hw_features = BOND_VLAN_FEATURES |
-				NETIF_F_HW_VLAN_CTAG_TX |
 				NETIF_F_HW_VLAN_CTAG_RX |
 				NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL;
 	bond_dev->features |= bond_dev->hw_features;
+	bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX;
 }
 
 /* Destroy a bonding device.

[PATCH 4.9 060/102] ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop

[Greg Kroah-Hartman]

From: Stephen Suryaputra <ssuryaextr@gmail.com>

[ Upstream commit 38c73529de13e1e10914de7030b659a2f8b01c3b ]

In commit 19e4e768064a8 ("ipv4: Fix raw socket lookup for local
traffic"), the dif argument to __raw_v4_lookup() is coming from the
returned value of inet_iif() but the change was done only for the first
lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex.

Fixes: 19e4e768064a8 ("ipv4: Fix raw socket lookup for local traffic")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/raw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -197,7 +197,7 @@ static int raw_v4_input(struct sk_buff *
 		}
 		sk = __raw_v4_lookup(net, sk_next(sk), iph->protocol,
 				     iph->saddr, iph->daddr,
-				     skb->dev->ifindex);
+				     dif);
 	}
 out:
 	read_unlock(&raw_v4_hashinfo.lock);

[PATCH 4.9 061/102] net: check before dereferencing netdev_ops during busy poll

[Greg Kroah-Hartman]

From: Josh Elsasser <jelsasser@appneta.com>

init_dummy_netdev() leaves its netdev_ops pointer zeroed. This leads
to a NULL pointer dereference when sk_busy_loop fires against an iwlwifi
wireless adapter and checks napi->dev->netdev_ops->ndo_busy_poll.

Avoid this by ensuring napi->dev->netdev_ops is valid before following
the pointer, avoiding the following panic when busy polling on a dummy
netdev:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8
  IP: [<ffffffff817b4b72>] sk_busy_loop+0x92/0x2f0
  Call Trace:
   [<ffffffff815a3134>] ? uart_write_room+0x74/0xf0
   [<ffffffff817964a9>] sock_poll+0x99/0xa0
   [<ffffffff81223142>] do_sys_poll+0x2e2/0x520
   [<ffffffff8118d3fc>] ? get_page_from_freelist+0x3bc/0xa30
   [<ffffffff810ada22>] ? update_curr+0x62/0x140
   [<ffffffff811ea671>] ? __slab_free+0xa1/0x2a0
   [<ffffffff811ea671>] ? __slab_free+0xa1/0x2a0
   [<ffffffff8179dbb1>] ? skb_free_head+0x21/0x30
   [<ffffffff81221bd0>] ? poll_initwait+0x50/0x50
   [<ffffffff811eaa36>] ? kmem_cache_free+0x1c6/0x1e0
   [<ffffffff815a4884>] ? uart_write+0x124/0x1d0
   [<ffffffff810bd1cd>] ? remove_wait_queue+0x4d/0x60
   [<ffffffff810bd224>] ? __wake_up+0x44/0x50
   [<ffffffff81582731>] ? tty_write_unlock+0x31/0x40
   [<ffffffff8158c5c6>] ? tty_ldisc_deref+0x16/0x20
   [<ffffffff81584820>] ? tty_write+0x1e0/0x2f0
   [<ffffffff81587e50>] ? process_echoes+0x80/0x80
   [<ffffffff8120c17b>] ? __vfs_write+0x2b/0x130
   [<ffffffff8120d09a>] ? vfs_write+0x15a/0x1a0
   [<ffffffff81223455>] SyS_poll+0x75/0x100
   [<ffffffff819a6524>] entry_SYSCALL_64_fastpath+0x24/0xcf

Commit 79e7fff47b7b ("net: remove support for per driver ndo_busy_poll()")
indirectly fixed this upstream in linux-4.11 by removing the offending
pointer usage. No other users of napi->dev touch its netdev_ops.

Fixes: ce6aea93f751 ("net: network drivers no longer need to implement ndo_busy_poll()") # 4.9.y
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

No changes since V2[1], resent as per discussiond on -stable[2]. I hope
this is the correct way to send net fixes for older LTS releases, I'm
going off of the latest netdev FAQ:

   For earlier stable releases, each stable branch maintainer is supposed
   to take care of them. If you find any patch is missing from an earlier
   stable branch, please notify stable@vger.kernel.org with either a commit
   ID or a formal patch backported, and CC Dave and other relevant networking
   developers.

[1]: https://patchwork.ozlabs.org/patch/884986/
[2]: https://lore.kernel.org/stable/CAGnkfhx3ykbEsW+=FtpMFWU=_Vnie7RpPYWpWqa1S1HPMXj9kw@mail.gmail.com/


 net/core/dev.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)


--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5083,7 +5083,10 @@ bool sk_busy_loop(struct sock *sk, int n
 		goto out;
 
 	/* Note: ndo_busy_poll method is optional in linux-4.5 */
-	busy_poll = napi->dev->netdev_ops->ndo_busy_poll;
+	if (napi->dev->netdev_ops)
+		busy_poll = napi->dev->netdev_ops->ndo_busy_poll;
+	else
+		busy_poll = NULL;
 
 	do {
 		rc = 0;

[PATCH 4.9 062/102] bpf: udp: Avoid calling reuseports bpf_prog from udp_gro

[Greg Kroah-Hartman]

From: Martin KaFai Lau <kafai@fb.com>

commit 257a525fe2e49584842c504a92c27097407f778f upstream.

When the commit a6024562ffd7 ("udp: Add GRO functions to UDP socket")
added udp[46]_lib_lookup_skb to the udp_gro code path, it broke
the reuseport_select_sock() assumption that skb->data is pointing
to the transport header.

This patch follows an earlier __udp6_lib_err() fix by
passing a NULL skb to avoid calling the reuseport's bpf_prog.

Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/udp.c |    6 +++++-
 net/ipv6/udp.c |    2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -569,7 +569,11 @@ static inline struct sock *__udp4_lib_lo
 struct sock *udp4_lib_lookup_skb(struct sk_buff *skb,
 				 __be16 sport, __be16 dport)
 {
-	return __udp4_lib_lookup_skb(skb, sport, dport, &udp_table);
+	const struct iphdr *iph = ip_hdr(skb);
+
+	return __udp4_lib_lookup(dev_net(skb->dev), iph->saddr, sport,
+				 iph->daddr, dport, inet_iif(skb),
+				 &udp_table, NULL);
 }
 EXPORT_SYMBOL_GPL(udp4_lib_lookup_skb);
 
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -294,7 +294,7 @@ struct sock *udp6_lib_lookup_skb(struct
 
 	return __udp6_lib_lookup(dev_net(skb->dev), &iph->saddr, sport,
 				 &iph->daddr, dport, inet6_iif(skb),
-				 &udp_table, skb);
+				 &udp_table, NULL);
 }
 EXPORT_SYMBOL_GPL(udp6_lib_lookup_skb);
 

[PATCH 4.9 063/102] bpf: udp: ipv6: Avoid running reuseports bpf_prog from __udp6_lib_err

[Greg Kroah-Hartman]

From: Martin KaFai Lau <kafai@fb.com>

commit 4ac30c4b3659efac031818c418beb51e630d512d upstream.

__udp6_lib_err() may be called when handling icmpv6 message. For example,
the icmpv6 toobig(type=2).  __udp6_lib_lookup() is then called
which may call reuseport_select_sock().  reuseport_select_sock() will
call into a bpf_prog (if there is one).

reuseport_select_sock() is expecting the skb->data pointing to the
transport header (udphdr in this case).  For example, run_bpf_filter()
is pulling the transport header.

However, in the __udp6_lib_err() path, the skb->data is pointing to the
ipv6hdr instead of the udphdr.

One option is to pull and push the ipv6hdr in __udp6_lib_err().
Instead of doing this, this patch follows how the original
commit 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF")
was done in IPv4, which has passed a NULL skb pointer to
reuseport_select_sock().

Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF")
Cc: Craig Gallek <kraig@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/udp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -479,7 +479,7 @@ void __udp6_lib_err(struct sk_buff *skb,
 	struct net *net = dev_net(skb->dev);
 
 	sk = __udp6_lib_lookup(net, daddr, uh->dest, saddr, uh->source,
-			       inet6_iif(skb), udptable, skb);
+			       inet6_iif(skb), udptable, NULL);
 	if (!sk) {
 		__ICMP6_INC_STATS(net, __in6_dev_get(skb->dev),
 				  ICMP6_MIB_INERRORS);

[PATCH 4.9 064/102] tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

commit c3bcde026684c62d7a2b6f626dc7cf763833875c upstream.

udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device
to count packets on dev->tstats, a perpcu variable. However, TIPC is using
udp tunnel with no tunnel device, and pass the lower dev, like veth device
that only initializes dev->lstats(a perpcu variable) when creating it.

Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as
a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each
pointer points to a bigger struct than lstats, so when tstats->tx_bytes is
increased, other percpu variable's members could be overwritten.

syzbot has reported quite a few crashes due to fib_nh_common percpu member
'nhc_pcpu_rth_output' overwritten, call traces are like:

  BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190
  net/ipv4/route.c:1556
    rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556
    __mkroute_output net/ipv4/route.c:2332 [inline]
    ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564
    ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393
    __ip_route_output_key include/net/route.h:125 [inline]
    ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651
    ip_route_output_key include/net/route.h:135 [inline]
  ...

or:

  kasan: GPF could be caused by NULL-ptr deref or user memory access
  RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168
    <IRQ>
    rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline]
    free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217
    __rcu_reclaim kernel/rcu/rcu.h:240 [inline]
    rcu_do_batch kernel/rcu/tree.c:2437 [inline]
    invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline]
    rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697
  ...

The issue exists since tunnel stats update is moved to iptunnel_xmit by
Commit 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()"),
and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb
so that the packets counting won't happen on dev->tstats.

Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com
Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com
Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com
Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com
Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com
Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com
Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/tipc/udp_media.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/net/tipc/udp_media.c
+++ b/net/tipc/udp_media.c
@@ -174,7 +174,6 @@ static int tipc_udp_xmit(struct net *net
 			goto tx_error;
 		}
 
-		skb->dev = rt->dst.dev;
 		ttl = ip4_dst_hoplimit(&rt->dst);
 		udp_tunnel_xmit_skb(rt, ub->ubsock->sk, skb, src->ipv4.s_addr,
 				    dst->ipv4.s_addr, 0, ttl, 0, src->port,
@@ -193,10 +192,9 @@ static int tipc_udp_xmit(struct net *net
 		if (err)
 			goto tx_error;
 		ttl = ip6_dst_hoplimit(ndst);
-		err = udp_tunnel6_xmit_skb(ndst, ub->ubsock->sk, skb,
-					   ndst->dev, &src->ipv6,
-					   &dst->ipv6, 0, ttl, 0, src->port,
-					   dst->port, false);
+		err = udp_tunnel6_xmit_skb(ndst, ub->ubsock->sk, skb, NULL,
+					   &src->ipv6, &dst->ipv6, 0, ttl, 0,
+					   src->port, dst->port, false);
 #endif
 	}
 	return err;

[PATCH 4.9 065/102] Bluetooth: Fix faulty expression for minimum encryption key size check

[Greg Kroah-Hartman]

From: Matias Karhumaa <matias.karhumaa@gmail.com>

commit eca94432934fe5f141d084f2e36ee2c0e614cc04 upstream.

Fix minimum encryption key size check so that HCI_MIN_ENC_KEY_SIZE is
also allowed as stated in the comment.

This bug caused connection problems with devices having maximum
encryption key size of 7 octets (56-bit).

Fixes: 693cd8ce3f88 ("Bluetooth: Fix regression with minimum encryption key size alignment")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203997
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/l2cap_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1352,7 +1352,7 @@ static bool l2cap_check_enc_key_size(str
 	 * actually encrypted before enforcing a key size.
 	 */
 	return (!test_bit(HCI_CONN_ENCRYPT, &hcon->flags) ||
-		hcon->enc_key_size > HCI_MIN_ENC_KEY_SIZE);
+		hcon->enc_key_size >= HCI_MIN_ENC_KEY_SIZE);
 }
 
 static void l2cap_do_start(struct l2cap_chan *chan)

[PATCH 4.9 066/102] ASoC : cs4265 : readable register too low

[Greg Kroah-Hartman]

[ Upstream commit f3df05c805983427319eddc2411a2105ee1757cf ]

The cs4265_readable_register function stopped short of the maximum
register.

An example bug is taken from :
https://github.com/Audio-Injector/Ultra/issues/25

Where alsactl store fails with :
Cannot read control '2,0,0,C Data Buffer,0': Input/output error

This patch fixes the bug by setting the cs4265 to have readable
registers up to the maximum hardware register CS4265_MAX_REGISTER.

Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs4265.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c
index 6e8eb1f5a041..bed64723e5d9 100644
--- a/sound/soc/codecs/cs4265.c
+++ b/sound/soc/codecs/cs4265.c
@@ -60,7 +60,7 @@ static const struct reg_default cs4265_reg_defaults[] = {
 static bool cs4265_readable_register(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
-	case CS4265_CHIP_ID ... CS4265_SPDIF_CTL2:
+	case CS4265_CHIP_ID ... CS4265_MAX_REGISTER:
 		return true;
 	default:
 		return false;
-- 
2.20.1

[PATCH 4.9 067/102] ASoC: soc-pcm: BE dai needs prepare when pause release after resume

[Greg Kroah-Hartman]

[ Upstream commit 5087a8f17df868601cd7568299e91c28086d2b45 ]

If playback/capture is paused and system enters S3, after system returns
from suspend, BE dai needs to call prepare() callback when playback/capture
is released from pause if RESUME_INFO flag is not set.

Currently, the dpcm_be_dai_prepare() function will block calling prepare()
if the pcm is in SND_SOC_DPCM_STATE_PAUSED state. This will cause the
following test case fail if the pcm uses BE:

playback -> pause -> S3 suspend -> S3 resume -> pause release

The playback may exit abnormally when pause is released because the BE dai
prepare() is not called.

This patch allows dpcm_be_dai_prepare() to call dai prepare() callback in
SND_SOC_DPCM_STATE_PAUSED state.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 1dbcdc99dbe3..1d00f6e894ef 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2247,7 +2247,8 @@ int dpcm_be_dai_prepare(struct snd_soc_pcm_runtime *fe, int stream)
 
 		if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_PARAMS) &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP) &&
-		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_SUSPEND))
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_SUSPEND) &&
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 			continue;
 
 		dev_dbg(be->dev, "ASoC: prepare BE %s\n",
-- 
2.20.1

[PATCH 4.9 068/102] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master

[Greg Kroah-Hartman]

[ Upstream commit 5caaf29af5ca82d5da8bc1d0ad07d9e664ccf1d8 ]

If spi_register_master fails in spi_bitbang_start
because device_add failure, We should return the
error code other than 0, otherwise calling
spi_bitbang_stop may trigger NULL pointer dereference
like this:

BUG: KASAN: null-ptr-deref in __list_del_entry_valid+0x45/0xd0
Read of size 8 at addr 0000000000000000 by task syz-executor.0/3661

CPU: 0 PID: 3661 Comm: syz-executor.0 Not tainted 5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xa9/0x10e
 ? __list_del_entry_valid+0x45/0xd0
 ? __list_del_entry_valid+0x45/0xd0
 __kasan_report+0x171/0x18d
 ? __list_del_entry_valid+0x45/0xd0
 kasan_report+0xe/0x20
 __list_del_entry_valid+0x45/0xd0
 spi_unregister_controller+0x99/0x1b0
 spi_lm70llp_attach+0x3ae/0x4b0 [spi_lm70llp]
 ? 0xffffffffc1128000
 ? klist_next+0x131/0x1e0
 ? driver_detach+0x40/0x40 [parport]
 port_check+0x3b/0x50 [parport]
 bus_for_each_dev+0x115/0x180
 ? subsys_dev_iter_exit+0x20/0x20
 __parport_register_driver+0x1f0/0x210 [parport]
 ? 0xffffffffc1150000
 do_one_initcall+0xb9/0x3b5
 ? perf_trace_initcall_level+0x270/0x270
 ? kasan_unpoison_shadow+0x30/0x40
 ? kasan_unpoison_shadow+0x30/0x40
 do_init_module+0xe0/0x330
 load_module+0x38eb/0x4270
 ? module_frob_arch_sections+0x20/0x20
 ? kernel_read_file+0x188/0x3f0
 ? find_held_lock+0x6d/0xd0
 ? fput_many+0x1a/0xe0
 ? __do_sys_finit_module+0x162/0x190
 __do_sys_finit_module+0x162/0x190
 ? __ia32_sys_init_module+0x40/0x40
 ? __mutex_unlock_slowpath+0xb4/0x3f0
 ? wait_for_completion+0x240/0x240
 ? vfs_write+0x160/0x2a0
 ? lockdep_hardirqs_off+0xb5/0x100
 ? mark_held_locks+0x1a/0x90
 ? do_syscall_64+0x14/0x2a0
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 702a4879ec33 ("spi: bitbang: Let spi_bitbang_start() take a reference to master")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-bitbang.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 3aa9e6e3dac8..4ef54436b9d4 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -392,7 +392,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	if (ret)
 		spi_master_put(master);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_start);
 
-- 
2.20.1

[PATCH 4.9 069/102] drm/mediatek: fix unbind functions

[Greg Kroah-Hartman]

[ Upstream commit 8fd7a37b191f93737f6280a9b5de65f98acc12c9 ]

detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.

Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index eaa5a2240c0c..bdbf358697cd 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -720,6 +720,8 @@ static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
 	/* Skip connector cleanup if creation was delegated to the bridge */
 	if (dsi->conn.dev)
 		drm_connector_cleanup(&dsi->conn);
+	if (dsi->panel)
+		drm_panel_detach(dsi->panel);
 }
 
 static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
-- 
2.20.1

[PATCH 4.9 070/102] ASoC: max98090: remove 24-bit format support if RJ is 0

[Greg Kroah-Hartman]

[ Upstream commit 5628c8979642a076f91ee86c3bae5ad251639af0 ]

The supported formats are S16_LE and S24_LE now. However, by datasheet
of max98090, S24_LE is only supported when it is in the right justified
mode. We should remove 24-bit format if it is not in that mode to avoid
triggering error.

Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 3e65dc74eb33..e7aef841f87d 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -1924,6 +1924,21 @@ static int max98090_configure_dmic(struct max98090_priv *max98090,
 	return 0;
 }
 
+static int max98090_dai_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct max98090_priv *max98090 = snd_soc_component_get_drvdata(component);
+	unsigned int fmt = max98090->dai_fmt;
+
+	/* Remove 24-bit format support if it is not in right justified mode. */
+	if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_RIGHT_J) {
+		substream->runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+		snd_pcm_hw_constraint_msbits(substream->runtime, 0, 16, 16);
+	}
+	return 0;
+}
+
 static int max98090_dai_hw_params(struct snd_pcm_substream *substream,
 				   struct snd_pcm_hw_params *params,
 				   struct snd_soc_dai *dai)
@@ -2331,6 +2346,7 @@ EXPORT_SYMBOL_GPL(max98090_mic_detect);
 #define MAX98090_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE)
 
 static const struct snd_soc_dai_ops max98090_dai_ops = {
+	.startup = max98090_dai_startup,
 	.set_sysclk = max98090_dai_set_sysclk,
 	.set_fmt = max98090_dai_set_fmt,
 	.set_tdm_slot = max98090_set_tdm_slot,
-- 
2.20.1

[PATCH 4.9 071/102] usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]

[Greg Kroah-Hartman]

[ Upstream commit 62fd0e0a24abeebe2c19fce49dd5716d9b62042d ]

There is no deallocation of fusb300->ep[i] elements, allocated at
fusb300_probe.

The patch adds deallocation of fusb300->ep array elements.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/fusb300_udc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index 948845c90e47..351012c498c5 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1345,12 +1345,15 @@ static const struct usb_gadget_ops fusb300_gadget_ops = {
 static int fusb300_remove(struct platform_device *pdev)
 {
 	struct fusb300 *fusb300 = platform_get_drvdata(pdev);
+	int i;
 
 	usb_del_gadget_udc(&fusb300->gadget);
 	iounmap(fusb300->reg);
 	free_irq(platform_get_irq(pdev, 0), fusb300);
 
 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+		kfree(fusb300->ep[i]);
 	kfree(fusb300);
 
 	return 0;
@@ -1494,6 +1497,8 @@ clean_up:
 		if (fusb300->ep0_req)
 			fusb300_free_request(&fusb300->ep[0]->ep,
 				fusb300->ep0_req);
+		for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+			kfree(fusb300->ep[i]);
 		kfree(fusb300);
 	}
 	if (reg)
-- 
2.20.1

[PATCH 4.9 072/102] usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC

[Greg Kroah-Hartman]

[ Upstream commit fbc318afadd6e7ae2252d6158cf7d0c5a2132f7d ]

Gadget drivers may queue request in interrupt context. This would lead to
a descriptor allocation in that context. In that case we would hit
BUG_ON(in_interrupt()) in __get_vm_area_node.

Also remove the unnecessary cast.

Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Tested-by: James Grant <jamesg@zaltys.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/lpc32xx_udc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 8f32b5ee7734..6df1aded4503 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -935,8 +935,7 @@ static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
 	dma_addr_t			dma;
 	struct lpc32xx_usbd_dd_gad	*dd;
 
-	dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc(
-			udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma);
+	dd = dma_pool_alloc(udc->dd_cache, GFP_ATOMIC | GFP_DMA, &dma);
 	if (dd)
 		dd->this_dma = dma;
 
-- 
2.20.1

[PATCH 4.9 073/102] scsi: hpsa: correct ioaccel2 chaining

[Greg Kroah-Hartman]

[ Upstream commit 625d7d3518875c4d303c652a198feaa13d9f52d9 ]

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for
  the last s/g element.

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when
  chaining.

Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Matt Perricone <matt.perricone@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hpsa.c     | 7 ++++++-
 drivers/scsi/hpsa_cmd.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 0b8db8a74d50..9f98c7211ec2 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4815,7 +4815,7 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 			curr_sg->reserved[0] = 0;
 			curr_sg->reserved[1] = 0;
 			curr_sg->reserved[2] = 0;
-			curr_sg->chain_indicator = 0x80;
+			curr_sg->chain_indicator = IOACCEL2_CHAIN;
 
 			curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex];
 		}
@@ -4832,6 +4832,11 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 			curr_sg++;
 		}
 
+		/*
+		 * Set the last s/g element bit
+		 */
+		(curr_sg - 1)->chain_indicator = IOACCEL2_LAST_SG;
+
 		switch (cmd->sc_data_direction) {
 		case DMA_TO_DEVICE:
 			cp->direction &= ~IOACCEL2_DIRECTION_MASK;
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 5961705eef76..39bcbec93c60 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -516,6 +516,7 @@ struct ioaccel2_sg_element {
 	u8 reserved[3];
 	u8 chain_indicator;
 #define IOACCEL2_CHAIN 0x80
+#define IOACCEL2_LAST_SG 0x40
 };
 
 /*
-- 
2.20.1

[PATCH 4.9 074/102] scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE

[Greg Kroah-Hartman]

[ Upstream commit c04e32e911653442fc834be6e92e072aeebe01a1 ]

At least for ARM64 kernels compiled with the crosstoolchain from
Debian/stretch or with the toolchain from kernel.org the line number is
not decoded correctly by 'decode_stacktrace.sh':

  $ echo "[  136.513051]  f1+0x0/0xc [kcrash]" | \
    CROSS_COMPILE=/opt/gcc-8.1.0-nolibc/aarch64-linux/bin/aarch64-linux- \
   ./scripts/decode_stacktrace.sh /scratch/linux-arm64/vmlinux \
                                  /scratch/linux-arm64 \
                                  /nfs/debian/lib/modules/4.20.0-devel
  [  136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:68) kcrash

If addr2line from the toolchain is used the decoded line number is correct:

  [  136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:57) kcrash

Link: http://lkml.kernel.org/r/20190527083425.3763-1-manut@linutronix.de
Signed-off-by: Manuel Traut <manut@linutronix.de>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/decode_stacktrace.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh
index edde8250195c..381acfc4c59d 100755
--- a/scripts/decode_stacktrace.sh
+++ b/scripts/decode_stacktrace.sh
@@ -65,7 +65,7 @@ parse_symbol() {
 	if [[ "${cache[$module,$address]+isset}" == "isset" ]]; then
 		local code=${cache[$module,$address]}
 	else
-		local code=$(addr2line -i -e "$objfile" "$address")
+		local code=$(${CROSS_COMPILE}addr2line -i -e "$objfile" "$address")
 		cache[$module,$address]=$code
 	fi
 
-- 
2.20.1

[PATCH 4.9 075/102] mm/mlock.c: change count_mm_mlocked_page_nr return type

[Greg Kroah-Hartman]

[ Upstream commit 0874bb49bb21bf24deda853e8bf61b8325e24bcb ]

On a 64-bit machine the value of "vma->vm_end - vma->vm_start" may be
negative when using 32 bit ints and the "count >> PAGE_SHIFT"'s result
will be wrong.  So change the local variable and return value to
unsigned long to fix the problem.

Link: http://lkml.kernel.org/r/20190513023701.83056-1-swkhack@gmail.com
Fixes: 0cf2f6f6dc60 ("mm: mlock: check against vma for actual mlock() size")
Signed-off-by: swkhack <swkhack@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/mlock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/mlock.c b/mm/mlock.c
index f0505692a5f4..3e7fe404bfb8 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -630,11 +630,11 @@ static int apply_vma_lock_flags(unsigned long start, size_t len,
  * is also counted.
  * Return value: previously mlocked page counts
  */
-static int count_mm_mlocked_page_nr(struct mm_struct *mm,
+static unsigned long count_mm_mlocked_page_nr(struct mm_struct *mm,
 		unsigned long start, size_t len)
 {
 	struct vm_area_struct *vma;
-	int count = 0;
+	unsigned long count = 0;
 
 	if (mm == NULL)
 		mm = current->mm;
-- 
2.20.1

[PATCH 4.9 076/102] MIPS: math-emu: do not use bools for arithmetic

[Greg Kroah-Hartman]

[ Upstream commit 8535f2ba0a9b971df62a5890699b9dfe2e0d5580 ]

GCC-7 complains about a boolean value being used with an arithmetic
AND:

arch/mips/math-emu/cp1emu.c: In function 'cop1Emulate':
arch/mips/math-emu/cp1emu.c:838:14: warning: '~' on a boolean expression [-Wbool-operation]
  fpr = (x) & ~(cop1_64bit(xcp) == 0);    \
              ^
arch/mips/math-emu/cp1emu.c:1068:3: note: in expansion of macro 'DITOREG'
   DITOREG(dval, MIPSInst_RT(ir));
   ^~~~~~~
arch/mips/math-emu/cp1emu.c:838:14: note: did you mean to use logical not?
  fpr = (x) & ~(cop1_64bit(xcp) == 0);    \

Since cop1_64bit() returns and int, just flip the LSB.

Suggested-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17058/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/math-emu/cp1emu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 7f2519cfb5d2..15f788601b64 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -828,12 +828,12 @@ do {									\
 } while (0)
 
 #define DIFROMREG(di, x)						\
-	((di) = get_fpr64(&ctx->fpr[(x) & ~(cop1_64bit(xcp) == 0)], 0))
+	((di) = get_fpr64(&ctx->fpr[(x) & ~(cop1_64bit(xcp) ^ 1)], 0))
 
 #define DITOREG(di, x)							\
 do {									\
 	unsigned fpr, i;						\
-	fpr = (x) & ~(cop1_64bit(xcp) == 0);				\
+	fpr = (x) & ~(cop1_64bit(xcp) ^ 1);				\
 	set_fpr64(&ctx->fpr[fpr], 0, di);				\
 	for (i = 1; i < ARRAY_SIZE(ctx->fpr[x].val64); i++)		\
 		set_fpr64(&ctx->fpr[fpr], i, 0);			\
-- 
2.20.1

[PATCH 4.9 077/102] MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()

[Greg Kroah-Hartman]

[ Upstream commit 02eec6c9fc0cb13169cc97a6139771768791f92b ]

In nlm_fmn_send() we have a loop which attempts to send a message
multiple times in order to handle the transient failure condition of a
lack of available credit. When examining the status register to detect
the failure we check for a condition that can never be true, which falls
foul of gcc 8's -Wtautological-compare:

  In file included from arch/mips/netlogic/common/irq.c:65:
  ./arch/mips/include/asm/netlogic/xlr/fmn.h: In function 'nlm_fmn_send':
  ./arch/mips/include/asm/netlogic/xlr/fmn.h:304:22: error: bitwise
    comparison always evaluates to false [-Werror=tautological-compare]
     if ((status & 0x2) == 1)
                        ^~

If the path taken if this condition were true all we do is print a
message to the kernel console. Since failures seem somewhat expected
here (making the console message questionable anyway) and the condition
has clearly never evaluated true we simply remove it, rather than
attempting to fix it to check status correctly.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20174/
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jayachandran C <jnair@caviumnetworks.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/netlogic/xlr/fmn.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/mips/include/asm/netlogic/xlr/fmn.h b/arch/mips/include/asm/netlogic/xlr/fmn.h
index 5604db3d1836..d79c68fa78d9 100644
--- a/arch/mips/include/asm/netlogic/xlr/fmn.h
+++ b/arch/mips/include/asm/netlogic/xlr/fmn.h
@@ -301,8 +301,6 @@ static inline int nlm_fmn_send(unsigned int size, unsigned int code,
 	for (i = 0; i < 8; i++) {
 		nlm_msgsnd(dest);
 		status = nlm_read_c2_status0();
-		if ((status & 0x2) == 1)
-			pr_info("Send pending fail!\n");
 		if ((status & 0x4) == 0)
 			return 0;
 	}
-- 
2.20.1

[PATCH 4.9 078/102] mfd: omap-usb-tll: Fix register offsets

[Greg Kroah-Hartman]

[ Upstream commit 993dc737c0996c163325961fb62a0ed9fd0308b4 ]

gcc-8 notices that the register number calculation is wrong
when the offset is an 'u8' but the number is larger than 256:

drivers/mfd/omap-usb-tll.c: In function 'omap_tll_init':
drivers/mfd/omap-usb-tll.c:90:46: error: overflow in conversion from 'int' to 'u8 {aka unsigned char}' chages value from 'i * 256 + 2070' to '22' [-Werror=overflow]

This addresses it by always using a 32-bit offset number for
the register. This is apparently an old problem that previous
compilers did not find.

Fixes: 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/omap-usb-tll.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 9d167c9af2c6..e153276ed954 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -131,12 +131,12 @@ static inline u32 usbtll_read(void __iomem *base, u32 reg)
 	return readl_relaxed(base + reg);
 }
 
-static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val)
+static inline void usbtll_writeb(void __iomem *base, u32 reg, u8 val)
 {
 	writeb_relaxed(val, base + reg);
 }
 
-static inline u8 usbtll_readb(void __iomem *base, u8 reg)
+static inline u8 usbtll_readb(void __iomem *base, u32 reg)
 {
 	return readb_relaxed(base + reg);
 }
-- 
2.20.1

[PATCH 4.9 079/102] ARC: fix allnoconfig build warning

[Greg Kroah-Hartman]

[ Upstream commit 5464d03d92601ac2977ef605b0cbb33276567daf ]

Reported-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index c7a081c583b9..2de75779a247 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -23,7 +23,7 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_FUTEX_CMPXCHG
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
-- 
2.20.1

[PATCH 4.9 080/102] bug.h: work around GCC PR82365 in BUG()

[Greg Kroah-Hartman]

[ Upstream commit 173a3efd3edb2ef6ef07471397c5f542a360e9c1 ]

Looking at functions with large stack frames across all architectures
led me discovering that BUG() suffers from the same problem as
fortify_panic(), which I've added a workaround for already.

In short, variables that go out of scope by calling a noreturn function
or __builtin_unreachable() keep using stack space in functions
afterwards.

A workaround that was identified is to insert an empty assembler
statement just before calling the function that doesn't return.  I'm
adding a macro "barrier_before_unreachable()" to document this, and
insert calls to that in all instances of BUG() that currently suffer
from this problem.

The files that saw the largest change from this had these frame sizes
before, and much less with my patch:

  fs/ext4/inode.c:82:1: warning: the frame size of 1672 bytes is larger than 800 bytes [-Wframe-larger-than=]
  fs/ext4/namei.c:434:1: warning: the frame size of 904 bytes is larger than 800 bytes [-Wframe-larger-than=]
  fs/ext4/super.c:2279:1: warning: the frame size of 1160 bytes is larger than 800 bytes [-Wframe-larger-than=]
  fs/ext4/xattr.c:146:1: warning: the frame size of 1168 bytes is larger than 800 bytes [-Wframe-larger-than=]
  fs/f2fs/inode.c:152:1: warning: the frame size of 1424 bytes is larger than 800 bytes [-Wframe-larger-than=]
  net/netfilter/ipvs/ip_vs_core.c:1195:1: warning: the frame size of 1068 bytes is larger than 800 bytes [-Wframe-larger-than=]
  net/netfilter/ipvs/ip_vs_core.c:395:1: warning: the frame size of 1084 bytes is larger than 800 bytes [-Wframe-larger-than=]
  net/netfilter/ipvs/ip_vs_ftp.c:298:1: warning: the frame size of 928 bytes is larger than 800 bytes [-Wframe-larger-than=]
  net/netfilter/ipvs/ip_vs_ftp.c:418:1: warning: the frame size of 908 bytes is larger than 800 bytes [-Wframe-larger-than=]
  net/netfilter/ipvs/ip_vs_lblcr.c:718:1: warning: the frame size of 960 bytes is larger than 800 bytes [-Wframe-larger-than=]
  drivers/net/xen-netback/netback.c:1500:1: warning: the frame size of 1088 bytes is larger than 800 bytes [-Wframe-larger-than=]

In case of ARC and CRIS, it turns out that the BUG() implementation
actually does return (or at least the compiler thinks it does),
resulting in lots of warnings about uninitialized variable use and
leaving noreturn functions, such as:

  block/cfq-iosched.c: In function 'cfq_async_queue_prio':
  block/cfq-iosched.c:3804:1: error: control reaches end of non-void function [-Werror=return-type]
  include/linux/dmaengine.h: In function 'dma_maxpq':
  include/linux/dmaengine.h:1123:1: error: control reaches end of non-void function [-Werror=return-type]

This makes them call __builtin_trap() instead, which should normally
dump the stack and kill the current process, like some of the other
architectures already do.

I tried adding barrier_before_unreachable() to panic() and
fortify_panic() as well, but that had very little effect, so I'm not
submitting that patch.

Vineet said:

: For ARC, it is double win.
:
: 1. Fixes 3 -Wreturn-type warnings
:
: | ../net/core/ethtool.c:311:1: warning: control reaches end of non-void function
: [-Wreturn-type]
: | ../kernel/sched/core.c:3246:1: warning: control reaches end of non-void function
: [-Wreturn-type]
: | ../include/linux/sunrpc/svc_xprt.h:180:1: warning: control reaches end of
: non-void function [-Wreturn-type]
:
: 2.  bloat-o-meter reports code size improvements as gcc elides the
:    generated code for stack return.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
Link: http://lkml.kernel.org/r/20171219114112.939391-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vineet Gupta <vgupta@synopsys.com>	[arch/arc]
Tested-by: Vineet Gupta <vgupta@synopsys.com>	[arch/arc]
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christopher Li <sparse@chrisli.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[removed cris chunks - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arc/include/asm/bug.h   |    3 ++-
 arch/ia64/include/asm/bug.h  |    6 +++++-
 arch/m68k/include/asm/bug.h  |    3 +++
 arch/sparc/include/asm/bug.h |    6 +++++-
 include/asm-generic/bug.h    |    1 +
 include/linux/compiler-gcc.h |   15 ++++++++++++++-
 include/linux/compiler.h     |    5 +++++
 7 files changed, 35 insertions(+), 4 deletions(-)

--- a/arch/arc/include/asm/bug.h
+++ b/arch/arc/include/asm/bug.h
@@ -23,7 +23,8 @@ void die(const char *str, struct pt_regs
 
 #define BUG()	do {								\
 	pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-	dump_stack();								\
+	barrier_before_unreachable();						\
+	__builtin_trap();							\
 } while (0)
 
 #define HAVE_ARCH_BUG
--- a/arch/ia64/include/asm/bug.h
+++ b/arch/ia64/include/asm/bug.h
@@ -3,7 +3,11 @@
 
 #ifdef CONFIG_BUG
 #define ia64_abort()	__builtin_trap()
-#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0)
+#define BUG() do {						\
+	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__);	\
+	barrier_before_unreachable();				\
+	ia64_abort();						\
+} while (0)
 
 /* should this BUG be made generic? */
 #define HAVE_ARCH_BUG
--- a/arch/m68k/include/asm/bug.h
+++ b/arch/m68k/include/asm/bug.h
@@ -7,16 +7,19 @@
 #ifndef CONFIG_SUN3
 #define BUG() do { \
 	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+	barrier_before_unreachable(); \
 	__builtin_trap(); \
 } while (0)
 #else
 #define BUG() do { \
 	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+	barrier_before_unreachable(); \
 	panic("BUG!"); \
 } while (0)
 #endif
 #else
 #define BUG() do { \
+	barrier_before_unreachable(); \
 	__builtin_trap(); \
 } while (0)
 #endif
--- a/arch/sparc/include/asm/bug.h
+++ b/arch/sparc/include/asm/bug.h
@@ -8,10 +8,14 @@
 void do_BUG(const char *file, int line);
 #define BUG() do {					\
 	do_BUG(__FILE__, __LINE__);			\
+	barrier_before_unreachable();			\
 	__builtin_trap();				\
 } while (0)
 #else
-#define BUG()		__builtin_trap()
+#define BUG() do {					\
+	barrier_before_unreachable();			\
+	__builtin_trap();				\
+} while (0)
 #endif
 
 #define HAVE_ARCH_BUG
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -47,6 +47,7 @@ struct bug_entry {
 #ifndef HAVE_ARCH_BUG
 #define BUG() do { \
 	printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
+	barrier_before_unreachable(); \
 	panic("BUG!"); \
 } while (0)
 #endif
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -234,6 +234,15 @@
 #endif
 
 /*
+ * calling noreturn functions, __builtin_unreachable() and __builtin_trap()
+ * confuse the stack allocation in gcc, leading to overly large stack
+ * frames, see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
+ *
+ * Adding an empty inline assembly before it works around the problem
+ */
+#define barrier_before_unreachable() asm volatile("")
+
+/*
  * Mark a position in code as unreachable.  This can be used to
  * suppress control flow warnings after asm blocks that transfer
  * control elsewhere.
@@ -243,7 +252,11 @@
  * unreleased.  Really, we need to have autoconf for the kernel.
  */
 #define unreachable() \
-	do { annotate_unreachable(); __builtin_unreachable(); } while (0)
+	do {					\
+		annotate_unreachable();		\
+		barrier_before_unreachable();	\
+		__builtin_unreachable();	\
+	} while (0)
 
 /* Mark a function definition as prohibited from being cloned. */
 #define __noclone	__attribute__((__noclone__, __optimize__("no-tracer")))
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -177,6 +177,11 @@ void ftrace_likely_update(struct ftrace_
 # define barrier_data(ptr) barrier()
 #endif
 
+/* workaround for GCC PR82365 if needed */
+#ifndef barrier_before_unreachable
+# define barrier_before_unreachable() do { } while (0)
+#endif
+
 /* Unreachable code */
 #ifndef unreachable
 # define unreachable() do { } while (1)

[PATCH 4.9 081/102] ARC: handle gcc generated __builtin_trap for older compiler

[Greg Kroah-Hartman]

From: Vineet Gupta <vgupta@synopsys.com>

commit af1be2e21203867cb958aaceed5366e2e24b88e8 upstream.

ARC gcc prior to GNU 2018.03 release didn't have a target specific
__builtin_trap() implementation, generating default abort() call.

Implement the abort() call - emulating what newer gcc does for the same,
as suggested by Arnd.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arc/kernel/traps.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -155,3 +155,11 @@ void do_insterror_or_kprobe(unsigned lon
 
 	insterror_is_error(address, regs);
 }
+
+/*
+ * abort() call generated by older gcc for __builtin_trap()
+ */
+void abort(void)
+{
+	__asm__ __volatile__("trap_s  5\n");
+}

[PATCH 4.9 082/102] clk: sunxi: fix uninitialized access

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 4e903450bcb9a6bc90733b981d7cb8b3c4996a0e upstream.

gcc-8 reports an uninitialized variable access in a code path
that we would see with incorrect DTB input:

drivers/clk/sunxi/clk-sun8i-bus-gates.c: In function 'sun8i_h3_bus_gates_init':
drivers/clk/sunxi/clk-sun8i-bus-gates.c:85:27: error: 'clk_parent' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This works around by skipping invalid input and printing a warning
instead if it ever happens. The problem was apparently part of the
initiali driver submission, but older compilers don't notice it.

Fixes: ab6e23a4e388 ("clk: sunxi: Add H3 clocks support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/sunxi/clk-sun8i-bus-gates.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/clk/sunxi/clk-sun8i-bus-gates.c
+++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
@@ -78,6 +78,10 @@ static void __init sun8i_h3_bus_gates_in
 			clk_parent = APB1;
 		else if (index >= 96 && index <= 127)
 			clk_parent = APB2;
+		else {
+			WARN_ON(true);
+			continue;
+		}
 
 		clk_reg = reg + 4 * (index / 32);
 		clk_bit = index % 32;

[PATCH 4.9 083/102] KVM: x86: degrade WARN to pr_warn_ratelimited

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit 3f16a5c318392cbb5a0c7a3d19dff8c8ef3c38ee upstream.

This warning can be triggered easily by userspace, so it should certainly not
cause a panic if panic_on_warn is set.

Reported-by: syzbot+c03f30b4f4c46bdf8575@syzkaller.appspotmail.com
Suggested-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1365,7 +1365,7 @@ static int set_tsc_khz(struct kvm_vcpu *
 			vcpu->arch.tsc_always_catchup = 1;
 			return 0;
 		} else {
-			WARN(1, "user requested TSC rate below hardware speed\n");
+			pr_warn_ratelimited("user requested TSC rate below hardware speed\n");
 			return -1;
 		}
 	}
@@ -1375,8 +1375,8 @@ static int set_tsc_khz(struct kvm_vcpu *
 				user_tsc_khz, tsc_khz);
 
 	if (ratio == 0 || ratio >= kvm_max_tsc_scaling_ratio) {
-		WARN_ONCE(1, "Invalid TSC scaling ratio - virtual-tsc-khz=%u\n",
-			  user_tsc_khz);
+		pr_warn_ratelimited("Invalid TSC scaling ratio - virtual-tsc-khz=%u\n",
+			            user_tsc_khz);
 		return -1;
 	}
 

[PATCH 4.9 084/102] drm/i915/dmc: protect against reading random memory

[Greg Kroah-Hartman]

commit bc7b488b1d1c71dc4c5182206911127bc6c410d6 upstream.

While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.

Before this patch:
	# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
	-rw-r--r-- 1 root root  25716 Feb  1 12:26 icl_dmc_ver1_07.bin
	# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
	# modprobe i915
	# dmesg| grep -i dmc
	[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
	[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)

i.e. it loads random data. Now it fails like below:
	[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
	[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
	i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
	i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915

Before reading any part of the firmware file, validate the input first.

Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com
(cherry picked from commit bc7b488b1d1c71dc4c5182206911127bc6c410d6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[ Lucas: backported to 4.9+ adjusting the context ]
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/intel_csr.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c
index 1ea0e1f43397..54d878cb458f 100644
--- a/drivers/gpu/drm/i915/intel_csr.c
+++ b/drivers/gpu/drm/i915/intel_csr.c
@@ -280,10 +280,17 @@ static uint32_t *parse_csr_fw(struct drm_i915_private *dev_priv,
 	uint32_t i;
 	uint32_t *dmc_payload;
 	uint32_t required_version;
+	size_t fsize;
 
 	if (!fw)
 		return NULL;
 
+	fsize = sizeof(struct intel_css_header) +
+		sizeof(struct intel_package_header) +
+		sizeof(struct intel_dmc_header);
+	if (fsize > fw->size)
+		goto error_truncated;
+
 	/* Extract CSS Header information*/
 	css_header = (struct intel_css_header *)fw->data;
 	if (sizeof(struct intel_css_header) !=
@@ -349,6 +356,9 @@ static uint32_t *parse_csr_fw(struct drm_i915_private *dev_priv,
 		return NULL;
 	}
 	readcount += dmc_offset;
+	fsize += dmc_offset;
+	if (fsize > fw->size)
+		goto error_truncated;
 
 	/* Extract dmc_header information. */
 	dmc_header = (struct intel_dmc_header *)&fw->data[readcount];
@@ -379,6 +389,10 @@ static uint32_t *parse_csr_fw(struct drm_i915_private *dev_priv,
 
 	/* fw_size is in dwords, so multiplied by 4 to convert into bytes. */
 	nbytes = dmc_header->fw_size * 4;
+	fsize += nbytes;
+	if (fsize > fw->size)
+		goto error_truncated;
+
 	if (nbytes > CSR_MAX_FW_SIZE) {
 		DRM_ERROR("CSR firmware too big (%u) bytes\n", nbytes);
 		return NULL;
@@ -392,6 +406,10 @@ static uint32_t *parse_csr_fw(struct drm_i915_private *dev_priv,
 	}
 
 	return memcpy(dmc_payload, &fw->data[readcount], nbytes);
+
+error_truncated:
+	DRM_ERROR("Truncated DMC firmware, rejecting.\n");
+	return NULL;
 }
 
 static void csr_load_work_fn(struct work_struct *work)
-- 
2.20.1

[PATCH 4.9 085/102] MIPS: Workaround GCC __builtin_unreachable reordering bug

[Greg Kroah-Hartman]

[ Upstream commit 906d441febc0de974b2a6ef848a8f058f3bfada3 ]

Some versions of GCC for the MIPS architecture suffer from a bug which
can lead to instructions from beyond an unreachable statement being
incorrectly reordered into earlier branch delay slots if the unreachable
statement is the only content of a case in a switch statement. This can
lead to seemingly random behaviour, such as invalid memory accesses from
incorrectly reordered loads or stores, and link failures on microMIPS
builds.

See this potential GCC fix for details:

    https://gcc.gnu.org/ml/gcc-patches/2015-09/msg00360.html

Runtime problems resulting from this bug were initially observed using a
maltasmvp_defconfig v4.4 kernel built using GCC 4.9.2 (from a Codescape
SDK 2015.06-05 toolchain), with the result being an address exception
taken after log messages about the L1 caches (during probe of the L2
cache):

    Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
    VPE topology {2,2} total 4
    Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
    Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
    <AdEL exception here>

This is early enough that the kernel exception vectors are not in use,
so any further output depends upon the bootloader. This is reproducible
in QEMU where no further output occurs - ie. the system hangs here.
Given the nature of the bug it may potentially be hit with differing
symptoms. The bug is known to affect GCC versions as recent as 7.3, and
it is unclear whether GCC 8 fixed it or just happens not to encounter
the bug in the testcase found at the link above due to differing
optimizations.

This bug can be worked around by placing a volatile asm statement, which
GCC is prevented from reordering past, prior to the
__builtin_unreachable call.

That was actually done already for other reasons by commit 173a3efd3edb
("bug.h: work around GCC PR82365 in BUG()"), but creates problems for
microMIPS builds due to the lack of a .insn directive. The microMIPS ISA
allows for interlinking with regular MIPS32 code by repurposing bit 0 of
the program counter as an ISA mode bit. To switch modes one changes the
value of this bit in the PC. However typical branch instructions encode
their offsets as multiples of 2-byte instruction halfwords, which means
they cannot change ISA mode - this must be done using either an indirect
branch (a jump-register in MIPS terminology) or a dedicated jalx
instruction. In order to ensure that regular branches don't attempt to
target code in a different ISA which they can't actually switch to, the
linker will check that branch targets are code in the same ISA as the
branch.

Unfortunately our empty asm volatile statements don't qualify as code,
and the link for microMIPS builds fails with errors such as:

    arch/mips/mm/dma-default.s:3265: Error: branch to a symbol in another ISA mode
    arch/mips/mm/dma-default.s:5027: Error: branch to a symbol in another ISA mode

Resolve this by adding a .insn directive within the asm statement which
declares that what comes next is code. This may or may not be true,
since we don't really know what comes next, but as this code is in an
unreachable path anyway that doesn't matter since we won't execute it.

We do this in asm/compiler.h & select CONFIG_HAVE_ARCH_COMPILER_H in
order to have this included by linux/compiler_types.h after
linux/compiler-gcc.h. This will result in asm/compiler.h being included
in all C compilations via the -include linux/compiler_types.h argument
in c_flags, which should be harmless.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 173a3efd3edb ("bug.h: work around GCC PR82365 in BUG()")
Patchwork: https://patchwork.linux-mips.org/patch/20270/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig                |  1 +
 arch/mips/include/asm/compiler.h | 35 ++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bb9940c6927e..6cd230434f32 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -13,6 +13,7 @@ config MIPS
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
+	select HAVE_ARCH_COMPILER_H
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h
index e081a265f422..cc2eb1b06050 100644
--- a/arch/mips/include/asm/compiler.h
+++ b/arch/mips/include/asm/compiler.h
@@ -8,6 +8,41 @@
 #ifndef _ASM_COMPILER_H
 #define _ASM_COMPILER_H
 
+/*
+ * With GCC 4.5 onwards we can use __builtin_unreachable to indicate to the
+ * compiler that a particular code path will never be hit. This allows it to be
+ * optimised out of the generated binary.
+ *
+ * Unfortunately at least GCC 4.6.3 through 7.3.0 inclusive suffer from a bug
+ * that can lead to instructions from beyond an unreachable statement being
+ * incorrectly reordered into earlier delay slots if the unreachable statement
+ * is the only content of a case in a switch statement. This can lead to
+ * seemingly random behaviour, such as invalid memory accesses from incorrectly
+ * reordered loads or stores. See this potential GCC fix for details:
+ *
+ *   https://gcc.gnu.org/ml/gcc-patches/2015-09/msg00360.html
+ *
+ * It is unclear whether GCC 8 onwards suffer from the same issue - nothing
+ * relevant is mentioned in GCC 8 release notes and nothing obviously relevant
+ * stands out in GCC commit logs, but these newer GCC versions generate very
+ * different code for the testcase which doesn't exhibit the bug.
+ *
+ * GCC also handles stack allocation suboptimally when calling noreturn
+ * functions or calling __builtin_unreachable():
+ *
+ *   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
+ *
+ * We work around both of these issues by placing a volatile asm statement,
+ * which GCC is prevented from reordering past, prior to __builtin_unreachable
+ * calls.
+ *
+ * The .insn statement is required to ensure that any branches to the
+ * statement, which sadly must be kept due to the asm statement, are known to
+ * be branches to code and satisfy linker requirements for microMIPS kernels.
+ */
+#undef barrier_before_unreachable
+#define barrier_before_unreachable() asm volatile(".insn")
+
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
 #define GCC_IMM_ASM() "n"
 #define GCC_REG_ACCUM "$0"
-- 
2.20.1

[PATCH 4.9 086/102] ptrace: Fix ->ptracer_cred handling for PTRACE_TRACEME

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 6994eefb0053799d2e07cd140df6c2ea106c41ee upstream.

Fix two issues:

When called for PTRACE_TRACEME, ptrace_link() would obtain an RCU
reference to the parent's objective credentials, then give that pointer
to get_cred().  However, the object lifetime rules for things like
struct cred do not permit unconditionally turning an RCU reference into
a stable reference.

PTRACE_TRACEME records the parent's credentials as if the parent was
acting as the subject, but that's not the case.  If a malicious
unprivileged child uses PTRACE_TRACEME and the parent is privileged, and
at a later point, the parent process becomes attacker-controlled
(because it drops privileges and calls execve()), the attacker ends up
with control over two processes with a privileged ptrace relationship,
which can be abused to ptrace a suid binary and obtain root privileges.

Fix both of these by always recording the credentials of the process
that is requesting the creation of the ptrace relationship:
current_cred() can't change under us, and current is the proper subject
for access control.

This change is theoretically userspace-visible, but I am not aware of
any code that it will actually break.

Fixes: 64b875f7ac8a ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/ptrace.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -74,9 +74,7 @@ void __ptrace_link(struct task_struct *c
  */
 static void ptrace_link(struct task_struct *child, struct task_struct *new_parent)
 {
-	rcu_read_lock();
-	__ptrace_link(child, new_parent, __task_cred(new_parent));
-	rcu_read_unlock();
+	__ptrace_link(child, new_parent, current_cred());
 }
 
 /**

[PATCH 4.9 087/102] crypto: user - prevent operating on larval algorithms

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 21d4120ec6f5b5992b01b96ac484701163917b63 upstream.

Michal Suchanek reported [1] that running the pcrypt_aead01 test from
LTP [2] in a loop and holding Ctrl-C causes a NULL dereference of
alg->cra_users.next in crypto_remove_spawns(), via crypto_del_alg().
The test repeatedly uses CRYPTO_MSG_NEWALG and CRYPTO_MSG_DELALG.

The crash occurs when the instance that CRYPTO_MSG_DELALG is trying to
unregister isn't a real registered algorithm, but rather is a "test
larval", which is a special "algorithm" added to the algorithms list
while the real algorithm is still being tested.  Larvals don't have
initialized cra_users, so that causes the crash.  Normally pcrypt_aead01
doesn't trigger this because CRYPTO_MSG_NEWALG waits for the algorithm
to be tested; however, CRYPTO_MSG_NEWALG returns early when interrupted.

Everything else in the "crypto user configuration" API has this same bug
too, i.e. it inappropriately allows operating on larval algorithms
(though it doesn't look like the other cases can cause a crash).

Fix this by making crypto_alg_match() exclude larval algorithms.

[1] https://lkml.kernel.org/r/20190625071624.27039-1-msuchanek@suse.de
[2] https://github.com/linux-test-project/ltp/blob/20190517/testcases/kernel/crypto/pcrypt_aead01.c

Reported-by: Michal Suchanek <msuchanek@suse.de>
Fixes: a38f7907b926 ("crypto: Add userspace configuration API")
Cc: <stable@vger.kernel.org> # v3.2+
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/crypto_user.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/crypto/crypto_user.c
+++ b/crypto/crypto_user.c
@@ -55,6 +55,9 @@ static struct crypto_alg *crypto_alg_mat
 	list_for_each_entry(q, &crypto_alg_list, cra_list) {
 		int match = 0;
 
+		if (crypto_is_larval(q))
+			continue;
+
 		if ((q->cra_flags ^ p->cru_type) & p->cru_mask)
 			continue;
 

[PATCH 4.9 088/102] ALSA: seq: fix incorrect order of dest_client/dest_ports arguments

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit c3ea60c231446663afd6ea1054da6b7f830855ca upstream.

There are two occurrances of a call to snd_seq_oss_fill_addr where
the dest_client and dest_port arguments are in the wrong order. Fix
this by swapping them around.

Addresses-Coverity: ("Arguments in wrong order")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/oss/seq_oss_ioctl.c |    2 +-
 sound/core/seq/oss/seq_oss_rw.c    |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/sound/core/seq/oss/seq_oss_ioctl.c
+++ b/sound/core/seq/oss/seq_oss_ioctl.c
@@ -62,7 +62,7 @@ static int snd_seq_oss_oob_user(struct s
 	if (copy_from_user(ev, arg, 8))
 		return -EFAULT;
 	memset(&tmpev, 0, sizeof(tmpev));
-	snd_seq_oss_fill_addr(dp, &tmpev, dp->addr.port, dp->addr.client);
+	snd_seq_oss_fill_addr(dp, &tmpev, dp->addr.client, dp->addr.port);
 	tmpev.time.tick = 0;
 	if (! snd_seq_oss_process_event(dp, (union evrec *)ev, &tmpev)) {
 		snd_seq_oss_dispatch(dp, &tmpev, 0, 0);
--- a/sound/core/seq/oss/seq_oss_rw.c
+++ b/sound/core/seq/oss/seq_oss_rw.c
@@ -174,7 +174,7 @@ insert_queue(struct seq_oss_devinfo *dp,
 	memset(&event, 0, sizeof(event));
 	/* set dummy -- to be sure */
 	event.type = SNDRV_SEQ_EVENT_NOTEOFF;
-	snd_seq_oss_fill_addr(dp, &event, dp->addr.port, dp->addr.client);
+	snd_seq_oss_fill_addr(dp, &event, dp->addr.client, dp->addr.port);
 
 	if (snd_seq_oss_process_event(dp, rec, &event))
 		return 0; /* invalid event - no need to insert queue */

[PATCH 4.9 089/102] ALSA: firewire-lib/fireworks: fix miss detection of received MIDI messages

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 7fbd1753b64eafe21cf842348a40a691d0dee440 upstream.

In IEC 61883-6, 8 MIDI data streams are multiplexed into single
MIDI conformant data channel. The index of stream is calculated by
modulo 8 of the value of data block counter.

In fireworks, the value of data block counter in CIP header has a quirk
with firmware version v5.0.0, v5.7.3 and v5.8.0. This brings ALSA
IEC 61883-1/6 packet streaming engine to miss detection of MIDI
messages.

This commit fixes the miss detection to modify the value of data block
counter for the modulo calculation.

For maintainers, this bug exists since a commit 18f5ed365d3f ("ALSA:
fireworks/firewire-lib: add support for recent firmware quirk") in Linux
kernel v4.2. There're many changes since the commit.  This fix can be
backported to Linux kernel v4.4 or later. I tagged a base commit to the
backport for your convenience.

Besides, my work for Linux kernel v5.3 brings heavy code refactoring and
some structure members are renamed in 'sound/firewire/amdtp-stream.h'.
The content of this patch brings conflict when merging -rc tree with
this patch and the latest tree. I request maintainers to solve the
conflict to replace 'tx_first_dbc' with 'ctx_data.tx.first_dbc'.

Fixes: df075feefbd3 ("ALSA: firewire-lib: complete AM824 data block processing layer")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/firewire/amdtp-am824.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/firewire/amdtp-am824.c
+++ b/sound/firewire/amdtp-am824.c
@@ -388,7 +388,7 @@ static void read_midi_messages(struct am
 	u8 *b;
 
 	for (f = 0; f < frames; f++) {
-		port = (s->data_block_counter + f) % 8;
+		port = (8 - s->tx_first_dbc + s->data_block_counter + f) % 8;
 		b = (u8 *)&buffer[p->midi_position];
 
 		len = b[0] - 0x80;

[PATCH 4.9 090/102] ALSA: line6: Fix write on zero-sized buffer

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 3450121997ce872eb7f1248417225827ea249710 upstream.

LINE6 drivers allocate the buffers based on the value returned from
usb_maxpacket() calls.  The manipulated device may return zero for
this, and this results in the kmalloc() with zero size (and it may
succeed) while the other part of the driver code writes the packet
data with the fixed size -- which eventually overwrites.

This patch adds a simple sanity check for the invalid buffer size for
avoiding that problem.

Reported-by: syzbot+219f00fb49874dcaea17@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/line6/pcm.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/sound/usb/line6/pcm.c
+++ b/sound/usb/line6/pcm.c
@@ -558,6 +558,11 @@ int line6_init_pcm(struct usb_line6 *lin
 	line6pcm->max_packet_size_out =
 		usb_maxpacket(line6->usbdev,
 			usb_sndisocpipe(line6->usbdev, ep_write), 1);
+	if (!line6pcm->max_packet_size_in || !line6pcm->max_packet_size_out) {
+		dev_err(line6pcm->line6->ifcdev,
+			"cannot get proper max packet size\n");
+		return -EINVAL;
+	}
 
 	spin_lock_init(&line6pcm->out.lock);
 	spin_lock_init(&line6pcm->in.lock);

[PATCH 4.9 091/102] ALSA: usb-audio: fix sign unintended sign extension on left shifts

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit 2acf5a3e6e9371e63c9e4ff54d84d08f630467a0 upstream.

There are a couple of left shifts of unsigned 8 bit values that
first get promoted to signed ints and hence get sign extended
on the shift if the top bit of the 8 bit values are set. Fix
this by casting the 8 bit values to unsigned ints to stop the
unintentional sign extension.

Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer_quirks.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -753,7 +753,7 @@ static int snd_ni_control_init_val(struc
 		return err;
 	}
 
-	kctl->private_value |= (value << 24);
+	kctl->private_value |= ((unsigned int)value << 24);
 	return 0;
 }
 
@@ -914,7 +914,7 @@ static int snd_ftu_eff_switch_init(struc
 	if (err < 0)
 		return err;
 
-	kctl->private_value |= value[0] << 24;
+	kctl->private_value |= (unsigned int)value[0] << 24;
 	return 0;
 }
 

[PATCH 4.9 092/102] lib/mpi: Fix karactx leak in mpi_powm

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

commit c8ea9fce2baf7b643384f36f29e4194fa40d33a6 upstream.

Sometimes mpi_powm will leak karactx because a memory allocation
failure causes a bail-out that skips the freeing of karactx.  This
patch moves the freeing of karactx to the end of the function like
everything else so that it can't be skipped.

Reported-by: syzbot+f7baccc38dcc1e094e77@syzkaller.appspotmail.com
Fixes: cdec9cb5167a ("crypto: GnuPG based MPI lib - source files...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/mpi/mpi-pow.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/lib/mpi/mpi-pow.c
+++ b/lib/mpi/mpi-pow.c
@@ -37,6 +37,7 @@
 int mpi_powm(MPI res, MPI base, MPI exp, MPI mod)
 {
 	mpi_ptr_t mp_marker = NULL, bp_marker = NULL, ep_marker = NULL;
+	struct karatsuba_ctx karactx = {};
 	mpi_ptr_t xp_marker = NULL;
 	mpi_ptr_t tspace = NULL;
 	mpi_ptr_t rp, ep, mp, bp;
@@ -164,13 +165,11 @@ int mpi_powm(MPI res, MPI base, MPI exp,
 		int c;
 		mpi_limb_t e;
 		mpi_limb_t carry_limb;
-		struct karatsuba_ctx karactx;
 
 		xp = xp_marker = mpi_alloc_limb_space(2 * (msize + 1));
 		if (!xp)
 			goto enomem;
 
-		memset(&karactx, 0, sizeof karactx);
 		negative_result = (ep[0] & 1) && base->sign;
 
 		i = esize - 1;
@@ -295,8 +294,6 @@ int mpi_powm(MPI res, MPI base, MPI exp,
 		if (mod_shift_cnt)
 			mpihelp_rshift(rp, rp, rsize, mod_shift_cnt);
 		MPN_NORMALIZE(rp, rsize);
-
-		mpihelp_release_karatsuba_ctx(&karactx);
 	}
 
 	if (negative_result && rsize) {
@@ -313,6 +310,7 @@ int mpi_powm(MPI res, MPI base, MPI exp,
 leave:
 	rc = 0;
 enomem:
+	mpihelp_release_karatsuba_ctx(&karactx);
 	if (assign_rp)
 		mpi_assign_limb_space(res, rp, size);
 	if (mp_marker)

[PATCH 4.9 093/102] drm/imx: notify drm core before sending event during crtc disable

[Greg Kroah-Hartman]

From: Robert Beckett <bob.beckett@collabora.com>

commit 78c68e8f5cd24bd32ba4ca1cdfb0c30cf0642685 upstream.

Notify drm core before sending pending events during crtc disable.
This fixes the first event after disable having an old stale timestamp
by having drm_crtc_vblank_off update the timestamp to now.

This was seen while debugging weston log message:
Warning: computed repaint delay is insane: -8212 msec

This occurred due to:
1. driver starts up
2. fbcon comes along and restores fbdev, enabling vblank
3. vblank_disable_fn fires via timer disabling vblank, keeping vblank
seq number and time set at current value
(some time later)
4. weston starts and does a modeset
5. atomic commit disables crtc while it does the modeset
6. ipu_crtc_atomic_disable sends vblank with old seq number and time

Fixes: a474478642d5 ("drm/imx: fix crtc vblank state regression")

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/imx/ipuv3-crtc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -76,14 +76,14 @@ static void ipu_crtc_atomic_disable(stru
 	drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, false);
 	ipu_dc_disable(ipu);
 
+	drm_crtc_vblank_off(crtc);
+
 	spin_lock_irq(&crtc->dev->event_lock);
 	if (crtc->state->event) {
 		drm_crtc_send_vblank_event(crtc, crtc->state->event);
 		crtc->state->event = NULL;
 	}
 	spin_unlock_irq(&crtc->dev->event_lock);
-
-	drm_crtc_vblank_off(crtc);
 }
 
 static void imx_drm_crtc_reset(struct drm_crtc *crtc)

[PATCH 4.9 094/102] drm/imx: only send event on crtc disable if kept disabled

[Greg Kroah-Hartman]

From: Robert Beckett <bob.beckett@collabora.com>

commit 5aeab2bfc9ffa72d3ca73416635cb3785dfc076f upstream.

The event will be sent as part of the vblank enable during the modeset
if the crtc is not being kept disabled.

Fixes: 5f2f911578fb ("drm/imx: atomic phase 3 step 1: Use atomic configuration")

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/imx/ipuv3-crtc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -79,7 +79,7 @@ static void ipu_crtc_atomic_disable(stru
 	drm_crtc_vblank_off(crtc);
 
 	spin_lock_irq(&crtc->dev->event_lock);
-	if (crtc->state->event) {
+	if (crtc->state->event && !crtc->state->active) {
 		drm_crtc_send_vblank_event(crtc, crtc->state->event);
 		crtc->state->event = NULL;
 	}

[PATCH 4.9 095/102] btrfs: Ensure replaced device doesnt have pending chunk allocation

[Greg Kroah-Hartman]

From: Nikolay Borisov <nborisov@suse.com>

commit debd1c065d2037919a7da67baf55cc683fee09f0 upstream.

Recent FITRIM work, namely bbbf7243d62d ("btrfs: combine device update
operations during transaction commit") combined the way certain
operations are recoded in a transaction. As a result an ASSERT was added
in dev_replace_finish to ensure the new code works correctly.
Unfortunately I got reports that it's possible to trigger the assert,
meaning that during a device replace it's possible to have an unfinished
chunk allocation on the source device.

This is supposed to be prevented by the fact that a transaction is
committed before finishing the replace oepration and alter acquiring the
chunk mutex. This is not sufficient since by the time the transaction is
committed and the chunk mutex acquired it's possible to allocate a chunk
depending on the workload being executed on the replaced device. This
bug has been present ever since device replace was introduced but there
was never code which checks for it.

The correct way to fix is to ensure that there is no pending device
modification operation when the chunk mutex is acquire and if there is
repeat transaction commit. Unfortunately it's not possible to just
exclude the source device from btrfs_fs_devices::dev_alloc_list since
this causes ENOSPC to be hit in transaction commit.

Fixing that in another way would need to add special cases to handle the
last writes and forbid new ones. The looped transaction fix is more
obvious, and can be easily backported. The runtime of dev-replace is
long so there's no noticeable delay caused by that.

Reported-by: David Sterba <dsterba@suse.com>
Fixes: 391cd9df81ac ("Btrfs: fix unprotected alloc list insertion during the finishing procedure of replace")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/dev-replace.c |   29 +++++++++++++++++++----------
 fs/btrfs/volumes.c     |    2 ++
 fs/btrfs/volumes.h     |    5 +++++
 3 files changed, 26 insertions(+), 10 deletions(-)

--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -511,18 +511,27 @@ static int btrfs_dev_replace_finishing(s
 	}
 	btrfs_wait_ordered_roots(root->fs_info, -1, 0, (u64)-1);
 
-	trans = btrfs_start_transaction(root, 0);
-	if (IS_ERR(trans)) {
-		mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
-		return PTR_ERR(trans);
+	while (1) {
+		trans = btrfs_start_transaction(root, 0);
+		if (IS_ERR(trans)) {
+			mutex_unlock(&dev_replace->lock_finishing_cancel_unmount);
+			return PTR_ERR(trans);
+		}
+		ret = btrfs_commit_transaction(trans, root);
+		WARN_ON(ret);
+		mutex_lock(&uuid_mutex);
+		/* keep away write_all_supers() during the finishing procedure */
+		mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
+		mutex_lock(&root->fs_info->chunk_mutex);
+		if (src_device->has_pending_chunks) {
+			mutex_unlock(&root->fs_info->chunk_mutex);
+			mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
+			mutex_unlock(&uuid_mutex);
+		} else {
+			break;
+		}
 	}
-	ret = btrfs_commit_transaction(trans, root);
-	WARN_ON(ret);
 
-	mutex_lock(&uuid_mutex);
-	/* keep away write_all_supers() during the finishing procedure */
-	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
-	mutex_lock(&root->fs_info->chunk_mutex);
 	btrfs_dev_replace_lock(dev_replace, 1);
 	dev_replace->replace_state =
 		scrub_ret ? BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -4876,6 +4876,7 @@ static int __btrfs_alloc_chunk(struct bt
 	for (i = 0; i < map->num_stripes; i++) {
 		num_bytes = map->stripes[i].dev->bytes_used + stripe_size;
 		btrfs_device_set_bytes_used(map->stripes[i].dev, num_bytes);
+		map->stripes[i].dev->has_pending_chunks = true;
 	}
 
 	spin_lock(&extent_root->fs_info->free_chunk_lock);
@@ -7250,6 +7251,7 @@ void btrfs_update_commit_device_bytes_us
 		for (i = 0; i < map->num_stripes; i++) {
 			dev = map->stripes[i].dev;
 			dev->commit_bytes_used = dev->bytes_used;
+			dev->has_pending_chunks = false;
 		}
 	}
 	unlock_chunks(root);
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -62,6 +62,11 @@ struct btrfs_device {
 
 	spinlock_t io_lock ____cacheline_aligned;
 	int running_pending;
+	/* When true means this device has pending chunk alloc in
+	 * current transaction. Protected by chunk_mutex.
+	 */
+	bool has_pending_chunks;
+
 	/* regular prio bios */
 	struct btrfs_pending_bios pending_bios;
 	/* WRITE_SYNC bios */

[PATCH 4.9 096/102] tty: rocket: fix incorrect forward declaration of rp_init()

[Greg Kroah-Hartman]

[ Upstream commit 423ea3255424b954947d167681b71ded1b8fca53 ]

Make the forward declaration actually match the real function
definition, something that previous versions of gcc had just ignored.

This is another patch to fix new warnings from gcc-9 before I start the
merge window pulls.  I don't want to miss legitimate new warnings just
because my system update brought a new compiler with new warnings.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/rocket.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index e8e8973939d3..447d791bde22 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -279,7 +279,7 @@ MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc1
 module_param_array(pc104_4, ulong, NULL, 0);
 MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
 
-static int rp_init(void);
+static int __init rp_init(void);
 static void rp_cleanup_module(void);
 
 module_init(rp_init);
-- 
2.20.1

[PATCH 4.9 097/102] arm64, vdso: Define vdso_{start,end} as array

[Greg Kroah-Hartman]

Commit dbbb08f500d6146398b794fdc68a8e811366b451 upstream.

Adjust vdso_{start|end} to be char arrays to avoid compile-time analysis
that flags "too large" memcmp() calls with CONFIG_FORTIFY_SOURCE.

Cc: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/vdso.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index c9b9a5a322eb..c0f315ecfa7c 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -37,7 +37,7 @@
 #include <asm/vdso.h>
 #include <asm/vdso_datapage.h>
 
-extern char vdso_start, vdso_end;
+extern char vdso_start[], vdso_end[];
 static unsigned long vdso_pages __ro_after_init;
 
 /*
@@ -124,14 +124,14 @@ static int __init vdso_init(void)
 	int i;
 	struct page **vdso_pagelist;
 
-	if (memcmp(&vdso_start, "\177ELF", 4)) {
+	if (memcmp(vdso_start, "\177ELF", 4)) {
 		pr_err("vDSO is not a valid ELF object!\n");
 		return -EINVAL;
 	}
 
-	vdso_pages = (&vdso_end - &vdso_start) >> PAGE_SHIFT;
+	vdso_pages = (vdso_end - vdso_start) >> PAGE_SHIFT;
 	pr_info("vdso: %ld pages (%ld code @ %p, %ld data @ %p)\n",
-		vdso_pages + 1, vdso_pages, &vdso_start, 1L, vdso_data);
+		vdso_pages + 1, vdso_pages, vdso_start, 1L, vdso_data);
 
 	/* Allocate the vDSO pagelist, plus a page for the data. */
 	vdso_pagelist = kcalloc(vdso_pages + 1, sizeof(struct page *),
@@ -144,7 +144,7 @@ static int __init vdso_init(void)
 
 	/* Grab the vDSO code pages. */
 	for (i = 0; i < vdso_pages; i++)
-		vdso_pagelist[i + 1] = pfn_to_page(PHYS_PFN(__pa(&vdso_start)) + i);
+		vdso_pagelist[i + 1] = pfn_to_page(PHYS_PFN(__pa(vdso_start)) + i);
 
 	vdso_spec[0].pages = &vdso_pagelist[0];
 	vdso_spec[1].pages = &vdso_pagelist[1];
-- 
2.20.1

[PATCH 4.9 098/102] KVM: LAPIC: Fix pending interrupt in IRR blocked by software disable LAPIC

[Greg Kroah-Hartman]

From: Wanpeng Li <wanpengli@tencent.com>

commit bb34e690e9340bc155ebed5a3d75fc63ff69e082 upstream.

Thomas reported that:

 | Background:
 |
 |    In preparation of supporting IPI shorthands I changed the CPU offline
 |    code to software disable the local APIC instead of just masking it.
 |    That's done by clearing the APIC_SPIV_APIC_ENABLED bit in the APIC_SPIV
 |    register.
 |
 | Failure:
 |
 |    When the CPU comes back online the startup code triggers occasionally
 |    the warning in apic_pending_intr_clear(). That complains that the IRRs
 |    are not empty.
 |
 |    The offending vector is the local APIC timer vector who's IRR bit is set
 |    and stays set.
 |
 | It took me quite some time to reproduce the issue locally, but now I can
 | see what happens.
 |
 | It requires apicv_enabled=0, i.e. full apic emulation. With apicv_enabled=1
 | (and hardware support) it behaves correctly.
 |
 | Here is the series of events:
 |
 |     Guest CPU
 |
 |     goes down
 |
 |       native_cpu_disable()
 |
 | 			apic_soft_disable();
 |
 |     play_dead()
 |
 |     ....
 |
 |     startup()
 |
 |       if (apic_enabled())
 |         apic_pending_intr_clear()	<- Not taken
 |
 |      enable APIC
 |
 |         apic_pending_intr_clear()	<- Triggers warning because IRR is stale
 |
 | When this happens then the deadline timer or the regular APIC timer -
 | happens with both, has fired shortly before the APIC is disabled, but the
 | interrupt was not serviced because the guest CPU was in an interrupt
 | disabled region at that point.
 |
 | The state of the timer vector ISR/IRR bits:
 |
 |     	     	       	        ISR     IRR
 | before apic_soft_disable()    0	      1
 | after apic_soft_disable()     0	      1
 |
 | On startup		      		 0	      1
 |
 | Now one would assume that the IRR is cleared after the INIT reset, but this
 | happens only on CPU0.
 |
 | Why?
 |
 | Because our CPU0 hotplug is just for testing to make sure nothing breaks
 | and goes through an NMI wakeup vehicle because INIT would send it through
 | the boots-trap code which is not really working if that CPU was not
 | physically unplugged.
 |
 | Now looking at a real world APIC the situation in that case is:
 |
 |     	     	       	      	ISR     IRR
 | before apic_soft_disable()    0	      1
 | after apic_soft_disable()     0	      1
 |
 | On startup		      		 0	      0
 |
 | Why?
 |
 | Once the dying CPU reenables interrupts the pending interrupt gets
 | delivered as a spurious interupt and then the state is clear.
 |
 | While that CPU0 hotplug test case is surely an esoteric issue, the APIC
 | emulation is still wrong, Even if the play_dead() code would not enable
 | interrupts then the pending IRR bit would turn into an ISR .. interrupt
 | when the APIC is reenabled on startup.

>From SDM 10.4.7.2 Local APIC State After It Has Been Software Disabled
* Pending interrupts in the IRR and ISR registers are held and require
  masking or handling by the CPU.

In Thomas's testing, hardware cpu will not respect soft disable LAPIC
when IRR has already been set or APICv posted-interrupt is in flight,
so we can skip soft disable APIC checking when clearing IRR and set ISR,
continue to respect soft disable APIC when attempting to set IRR.

Reported-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: Feng Tang <feng.tang@intel.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rong Chen <rong.a.chen@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/lapic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1992,7 +1992,7 @@ int kvm_apic_has_interrupt(struct kvm_vc
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	int highest_irr;
 
-	if (!apic_enabled(apic))
+	if (!kvm_apic_hw_enabled(apic))
 		return -1;
 
 	apic_update_ppr(apic);

[PATCH 4.9 099/102] IB/hfi1: Close PSM sdma_progress sleep window

[Greg Kroah-Hartman]

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

commit da9de5f8527f4b9efc82f967d29a583318c034c7 upstream.

The call to sdma_progress() is called outside the wait lock.

In this case, there is a race condition where sdma_progress() can return
false and the sdma_engine can idle.  If that happens, there will be no
more sdma interrupts to cause the wakeup and the user_sdma xmit will hang.

Fix by moving the lock to enclose the sdma_progress() call.

Also, delete busycount. The need for this was removed by:
commit bcad29137a97 ("IB/hfi1: Serve the most starved iowait entry first")

Cc: <stable@vger.kernel.org>
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/infiniband/hw/hfi1/user_sdma.c |   13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

--- a/drivers/infiniband/hw/hfi1/user_sdma.c
+++ b/drivers/infiniband/hw/hfi1/user_sdma.c
@@ -260,7 +260,6 @@ struct user_sdma_txreq {
 	struct list_head list;
 	struct user_sdma_request *req;
 	u16 flags;
-	unsigned busycount;
 	u64 seqnum;
 };
 
@@ -323,25 +322,22 @@ static int defer_packet_queue(
 	struct hfi1_user_sdma_pkt_q *pq =
 		container_of(wait, struct hfi1_user_sdma_pkt_q, busy);
 	struct hfi1_ibdev *dev = &pq->dd->verbs_dev;
-	struct user_sdma_txreq *tx =
-		container_of(txreq, struct user_sdma_txreq, txreq);
 
-	if (sdma_progress(sde, seq, txreq)) {
-		if (tx->busycount++ < MAX_DEFER_RETRY_COUNT)
-			goto eagain;
-	}
+	write_seqlock(&dev->iowait_lock);
+	if (sdma_progress(sde, seq, txreq))
+		goto eagain;
 	/*
 	 * We are assuming that if the list is enqueued somewhere, it
 	 * is to the dmawait list since that is the only place where
 	 * it is supposed to be enqueued.
 	 */
 	xchg(&pq->state, SDMA_PKT_Q_DEFERRED);
-	write_seqlock(&dev->iowait_lock);
 	if (list_empty(&pq->busy.list))
 		list_add_tail(&pq->busy.list, &sde->dmawait);
 	write_sequnlock(&dev->iowait_lock);
 	return -EBUSY;
 eagain:
+	write_sequnlock(&dev->iowait_lock);
 	return -EAGAIN;
 }
 
@@ -925,7 +921,6 @@ static int user_sdma_send_pkts(struct us
 
 		tx->flags = 0;
 		tx->req = req;
-		tx->busycount = 0;
 		INIT_LIST_HEAD(&tx->list);
 
 		if (req->seqnum == req->info.npkts - 1)

[PATCH 4.9 100/102] MIPS: Add missing EHB in mtc0 -> mfc0 sequence.

[Greg Kroah-Hartman]

From: Dmitry Korotin <dkorotin@wavecomp.com>

commit 0b24cae4d535045f4c9e177aa228d4e97bad212c upstream.

Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence.
Without this execution hazard barrier it's possible for the value read
back from the KScratch register to be the value from before the mtc0.

Reproducible on P5600 & P6600.

The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:

   Producer | Consumer | Hazard
  ----------|----------|----------------------------
   mtc0     | mfc0     | any coprocessor 0 register

Signed-off-by: Dmitry Korotin <dkorotin@wavecomp.com>
[paul.burton@mips.com:
  - Commit message tweaks.
  - Add Fixes tags.
  - Mark for stable back to v3.15 where P5600 support was introduced.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3d8bfdd03072 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer.")
Fixes: 829dcc0a956a ("MIPS: Add MIPS P5600 probe support")
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/tlbex.c |   29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -386,6 +386,7 @@ static struct work_registers build_get_w
 static void build_restore_work_registers(u32 **p)
 {
 	if (scratch_reg >= 0) {
+		uasm_i_ehb(p);
 		UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
 		return;
 	}
@@ -674,10 +675,12 @@ static void build_restore_pagemask(u32 *
 			uasm_i_mtc0(p, 0, C0_PAGEMASK);
 			uasm_il_b(p, r, lid);
 		}
-		if (scratch_reg >= 0)
+		if (scratch_reg >= 0) {
+			uasm_i_ehb(p);
 			UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-		else
+		} else {
 			UASM_i_LW(p, 1, scratchpad_offset(0), 0);
+		}
 	} else {
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
@@ -935,10 +938,12 @@ build_get_pgd_vmalloc64(u32 **p, struct
 		uasm_i_jr(p, ptr);
 
 		if (mode == refill_scratch) {
-			if (scratch_reg >= 0)
+			if (scratch_reg >= 0) {
+				uasm_i_ehb(p);
 				UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-			else
+			} else {
 				UASM_i_LW(p, 1, scratchpad_offset(0), 0);
+			}
 		} else {
 			uasm_i_nop(p);
 		}
@@ -1238,6 +1243,7 @@ build_fast_tlb_refill_handler (u32 **p,
 	UASM_i_MTC0(p, odd, C0_ENTRYLO1); /* load it */
 
 	if (c0_scratch_reg >= 0) {
+		uasm_i_ehb(p);
 		UASM_i_MFC0(p, scratch, c0_kscratch(), c0_scratch_reg);
 		build_tlb_write_entry(p, l, r, tlb_random);
 		uasm_l_leave(l, *p);
@@ -1592,15 +1598,17 @@ static void build_setup_pgd(void)
 		uasm_i_dinsm(&p, a0, 0, 29, 64 - 29);
 		uasm_l_tlbl_goaround1(&l, p);
 		UASM_i_SLL(&p, a0, a0, 11);
-		uasm_i_jr(&p, 31);
 		UASM_i_MTC0(&p, a0, C0_CONTEXT);
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
 	} else {
 		/* PGD in c0_KScratch */
-		uasm_i_jr(&p, 31);
 		if (cpu_has_ldpte)
 			UASM_i_MTC0(&p, a0, C0_PWBASE);
 		else
 			UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
 	}
 #else
 #ifdef CONFIG_SMP
@@ -1614,13 +1622,16 @@ static void build_setup_pgd(void)
 	UASM_i_LA_mostly(&p, a2, pgdc);
 	UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2);
 #endif /* SMP */
-	uasm_i_jr(&p, 31);
 
 	/* if pgd_reg is allocated, save PGD also to scratch register */
-	if (pgd_reg != -1)
+	if (pgd_reg != -1) {
 		UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
-	else
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
+	} else {
+		uasm_i_jr(&p, 31);
 		uasm_i_nop(&p);
+	}
 #endif
 	if (p >= tlbmiss_handler_setup_pgd_end)
 		panic("tlbmiss_handler_setup_pgd space exceeded");

[PATCH 4.9 101/102] dmaengine: imx-sdma: remove BD_INTR for channel0

[Greg Kroah-Hartman]

From: Robin Gong <yibin.gong@nxp.com>

commit 3f93a4f297961c12bb17aa16cb3a4d1291823cae upstream.

It is possible for an irq triggered by channel0 to be received later
after clks are disabled once firmware loaded during sdma probe. If
that happens then clearing them by writing to SDMA_H_INTR won't work
and the kernel will hang processing infinite interrupts. Actually,
don't need interrupt triggered on channel0 since it's pollling
SDMA_H_STATSTOP to know channel0 done rather than interrupt in
current code, just clear BD_INTR to disable channel0 interrupt to
avoid the above case.
This issue was brought by commit 1d069bfa3c78 ("dmaengine: imx-sdma:
ack channel 0 IRQ in the interrupt handler") which didn't take care
the above case.

Fixes: 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler")
Cc: stable@vger.kernel.org #5.0+
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Tested-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/imx-sdma.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -632,7 +632,7 @@ static int sdma_load_script(struct sdma_
 	spin_lock_irqsave(&sdma->channel_0_lock, flags);
 
 	bd0->mode.command = C0_SETPM;
-	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
+	bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD;
 	bd0->mode.count = size / 2;
 	bd0->buffer_addr = buf_phys;
 	bd0->ext_buffer_addr = address;
@@ -909,7 +909,7 @@ static int sdma_load_context(struct sdma
 	context->gReg[7] = sdmac->watermark_level;
 
 	bd0->mode.command = C0_SETDM;
-	bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
+	bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD;
 	bd0->mode.count = sizeof(*context) / 4;
 	bd0->buffer_addr = sdma->context_phys;
 	bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;

[PATCH 4.9 102/102] arm64: kaslr: keep modules inside module region when KASAN is enabled

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

commit 6f496a555d93db7a11d4860b9220d904822f586a upstream.

When KASLR and KASAN are both enabled, we keep the modules where they
are, and randomize the placement of the kernel so it is within 2 GB
of the module region. The reason for this is that putting modules in
the vmalloc region (like we normally do when KASLR is enabled) is not
possible in this case, given that the entire vmalloc region is already
backed by KASAN zero shadow pages, and so allocating dedicated KASAN
shadow space as required by loaded modules is not possible.

The default module allocation window is set to [_etext - 128MB, _etext]
in kaslr.c, which is appropriate for KASLR kernels booted without a
seed or with 'nokaslr' on the command line. However, as it turns out,
it is not quite correct for the KASAN case, since it still intersects
the vmalloc region at the top, where attempts to allocate shadow pages
will collide with the KASAN zero shadow pages, causing a WARN() and all
kinds of other trouble. So cap the top end to MODULES_END explicitly
when running with KASAN.

Cc: <stable@vger.kernel.org> # 4.9+
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: backport to 4.9.y]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/module.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -33,10 +33,14 @@
 void *module_alloc(unsigned long size)
 {
 	void *p;
+	u64 module_alloc_end = module_alloc_base + MODULES_VSIZE;
+
+	if (IS_ENABLED(CONFIG_KASAN))
+		/* don't exceed the static module region - see below */
+		module_alloc_end = MODULES_END;
 
 	p = __vmalloc_node_range(size, MODULE_ALIGN, module_alloc_base,
-				module_alloc_base + MODULES_VSIZE,
-				GFP_KERNEL, PAGE_KERNEL_EXEC, 0,
+				module_alloc_end, GFP_KERNEL, PAGE_KERNEL_EXEC, 0,
 				NUMA_NO_NODE, __builtin_return_address(0));
 
 	if (!p && IS_ENABLED(CONFIG_ARM64_MODULE_PLTS) &&

Re: [PATCH 4.9 000/102] 4.9.185-stable review

[kernelci.org bot]

stable-rc/linux-4.9.y boot: 94 boots: 2 failed, 92 passed (v4.9.184-102-gf075c4e9d730)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.184-102-gf075c4e9d730/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.184-102-gf075c4e9d730/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.184-102-gf075c4e9d730
Git Commit: f075c4e9d7301b229ebc16b6ae51dd5094802c48
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 49 unique boards, 21 SoC families, 15 builds out of 197

Boot Failures Detected:

arm:
    sunxi_defconfig:
        gcc-8:
            sun7i-a20-bananapi: 1 failed lab

    multi_v7_defconfig:
        gcc-8:
            sun7i-a20-bananapi: 1 failed lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.9 000/102] 4.9.185-stable review

[Naresh Kamboju]

On Mon, 8 Jul 2019 at 20:50, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.185 release.
> There are 102 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 10 Jul 2019 03:03:52 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.185-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.9.185-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: bb7044a09b6bd0f3b0a78afd25a4eb42ca85f50d
git describe: v4.9.184-103-gbb7044a09b6b
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.184-103-gbb7044a09b6b


No regressions (compared to build v4.9.184)

No fixes (compared to build v4.9.184)


Ran 23371 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-fs-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 000/102] 4.9.185-stable review

[shuah]

On 7/8/19 9:11 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.185 release.
> There are 102 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed 10 Jul 2019 03:03:52 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.185-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.9 000/102] 4.9.185-stable review

[Guenter Roeck]

On Mon, Jul 08, 2019 at 05:11:53PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.185 release.
> There are 102 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed 10 Jul 2019 03:03:52 PM UTC.
> Anything received after that time might be too late.
> 
Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 333 pass: 333 fail: 0

Guenter

Re: [PATCH 4.9 000/102] 4.9.185-stable review

[Jon Hunter]

On 08/07/2019 16:11, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.185 release.
> There are 102 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed 10 Jul 2019 03:03:52 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.185-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.9.185-rc1-gbb7044a09b6b
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic