[PATCH 0/6] firmware: arm_scmi: miscellaneous fixes/updates

[PATCH 0/6] firmware: arm_scmi: miscellaneous fixes/updates

[Sudeep Holla]

Hi,

Here are few miscellaneous fixes and updates to SCMI. Fixes are mostly
for the reported issues and updates are based on code inspection during
development of new features(delayed response and notifications). The
new features will follow this.

--
Regards,
Sudeep

Nishad Kamdar (1):
  firmware: arm_scmi: Use the correct style for SPDX License Identifier

Sudeep Holla (5):
  firmware: arm_scmi: Align few names in sensors protocol with SCMI specification
  firmware: arm_scmi: Remove extra check for invalid length message responses
  firmware: arm_scmi: Fix few trivial typos in comments
  firmware: arm_scmi: Use the term 'message' instead of 'command'
  firmware: arm_scmi: Check if platform has released shmem before using

 drivers/firmware/arm_scmi/common.h  | 12 ++++++------
 drivers/firmware/arm_scmi/driver.c  | 24 +++++++++++++-----------
 drivers/firmware/arm_scmi/sensors.c | 28 +++++++++++++++-------------
 include/linux/scmi_protocol.h       | 12 ++++++------
 4 files changed, 40 insertions(+), 36 deletions(-)

-- 
2.17.1

[PATCH 1/6] firmware: arm_scmi: Use the correct style for SPDX License Identifier

[Sudeep Holla]

From: Nishad Kamdar <nishadkamdar@gmail.com>

This patch corrects the SPDX License Identifier style in header file
related to Firmware Drivers for ARM SCMI Message Protocol.

For C header files Documentation/process/license-rules.rst mandates
C-like comments(opposed to C source files where C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 937a930ce87d..44fd4f9404a9 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * System Control and Management Interface (SCMI) Message Protocol
  * driver common header file containing some definitions, structures
-- 
2.17.1

[PATCH 2/6] firmware: arm_scmi: Align few names in sensors protocol with SCMI specification

[Sudeep Holla]

Looks like more code developed during the draft versions of the
specification slipped through and they don't match the final
released version. This seem to have happened only with sensor
protocol.

Renaming few command and function names here to match exactly with
the released version of SCMI specification for ease of maintenance.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/sensors.c | 28 +++++++++++++++-------------
 include/linux/scmi_protocol.h       | 12 ++++++------
 2 files changed, 21 insertions(+), 19 deletions(-)

diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 0e94ab56f679..17dbabd8a94a 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -9,8 +9,8 @@
 
 enum scmi_sensor_protocol_cmd {
 	SENSOR_DESCRIPTION_GET = 0x3,
-	SENSOR_CONFIG_SET = 0x4,
-	SENSOR_TRIP_POINT_SET = 0x5,
+	SENSOR_TRIP_POINT_NOTIFY = 0x4,
+	SENSOR_TRIP_POINT_CONFIG = 0x5,
 	SENSOR_READING_GET = 0x6,
 };
 
@@ -42,9 +42,10 @@ struct scmi_msg_resp_sensor_description {
 	} desc[0];
 };
 
-struct scmi_msg_set_sensor_config {
+struct scmi_msg_sensor_trip_point_notify {
 	__le32 id;
 	__le32 event_control;
+#define SENSOR_TP_NOTIFY_ALL	BIT(0)
 };
 
 struct scmi_msg_set_sensor_trip_point {
@@ -160,15 +161,15 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
 	return ret;
 }
 
-static int
-scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id)
+static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
+					 u32 sensor_id, bool enable)
 {
 	int ret;
-	u32 evt_cntl = BIT(0);
+	u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0;
 	struct scmi_xfer *t;
-	struct scmi_msg_set_sensor_config *cfg;
+	struct scmi_msg_sensor_trip_point_notify *cfg;
 
-	ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET,
+	ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY,
 				 SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
 	if (ret)
 		return ret;
@@ -183,15 +184,16 @@ scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id)
 	return ret;
 }
 
-static int scmi_sensor_trip_point_set(const struct scmi_handle *handle,
-				      u32 sensor_id, u8 trip_id, u64 trip_value)
+static int
+scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
+			      u8 trip_id, u64 trip_value)
 {
 	int ret;
 	u32 evt_cntl = SENSOR_TP_BOTH;
 	struct scmi_xfer *t;
 	struct scmi_msg_set_sensor_trip_point *trip;
 
-	ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_SET,
+	ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_CONFIG,
 				 SCMI_PROTOCOL_SENSOR, sizeof(*trip), 0, &t);
 	if (ret)
 		return ret;
@@ -255,8 +257,8 @@ static int scmi_sensor_count_get(const struct scmi_handle *handle)
 static struct scmi_sensor_ops sensor_ops = {
 	.count_get = scmi_sensor_count_get,
 	.info_get = scmi_sensor_info_get,
-	.configuration_set = scmi_sensor_configuration_set,
-	.trip_point_set = scmi_sensor_trip_point_set,
+	.trip_point_notify = scmi_sensor_trip_point_notify,
+	.trip_point_config = scmi_sensor_trip_point_config,
 	.reading_get = scmi_sensor_reading_get,
 };
 
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 9ff2e9357e9a..ea6b72018752 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -167,9 +167,9 @@ enum scmi_sensor_class {
  *
  * @count_get: get the count of sensors provided by SCMI
  * @info_get: get the information of the specified sensor
- * @configuration_set: control notifications on cross-over events for
+ * @trip_point_notify: control notifications on cross-over events for
  *	the trip-points
- * @trip_point_set: selects and configures a trip-point of interest
+ * @trip_point_config: selects and configures a trip-point of interest
  * @reading_get: gets the current value of the sensor
  */
 struct scmi_sensor_ops {
@@ -177,10 +177,10 @@ struct scmi_sensor_ops {
 
 	const struct scmi_sensor_info *(*info_get)
 		(const struct scmi_handle *handle, u32 sensor_id);
-	int (*configuration_set)(const struct scmi_handle *handle,
-				 u32 sensor_id);
-	int (*trip_point_set)(const struct scmi_handle *handle, u32 sensor_id,
-			      u8 trip_id, u64 trip_value);
+	int (*trip_point_notify)(const struct scmi_handle *handle,
+				 u32 sensor_id, bool enable);
+	int (*trip_point_config)(const struct scmi_handle *handle,
+				 u32 sensor_id, u8 trip_id, u64 trip_value);
 	int (*reading_get)(const struct scmi_handle *handle, u32 sensor_id,
 			   bool async, u64 *value);
 };
-- 
2.17.1

[PATCH 3/6] firmware: arm_scmi: Remove extra check for invalid length message responses

[Sudeep Holla]

scmi_xfer_get_init ensures both transmit and receive buffer lengths are
within the maximum limits. If receive buffer length is not supplied by
the caller, it's set to the maximum limit value. Receive buffer length
is never modified after that. So there's no need for the extra check
when receive transmit completion for a command essage.

Further, if the response header length is greater than the prescribed
receive buffer length, the response buffer is truncated to the latter.

Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/driver.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index b5bc4c7a8fab..6ef652940099 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -230,12 +230,6 @@ static void scmi_rx_callback(struct mbox_client *cl, void *m)
 	xfer = &minfo->xfer_block[xfer_id];
 
 	scmi_dump_header_dbg(dev, &xfer->hdr);
-	/* Is the message of valid length? */
-	if (xfer->rx.len > info->desc->max_msg_size) {
-		dev_err(dev, "unable to handle %zu xfer(max %d)\n",
-			xfer->rx.len, info->desc->max_msg_size);
-		return;
-	}
 
 	scmi_fetch_response(xfer, mem);
 	complete(&xfer->done);
-- 
2.17.1

[PATCH 4/6] firmware: arm_scmi: Fix few trivial typos in comments

[Sudeep Holla]

While adding new comments found couple of typos that are better fixed.

s/informfation/information/
s/statues/status/

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/driver.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 6ef652940099..cac255c418b2 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -86,7 +86,7 @@ struct scmi_desc {
 };
 
 /**
- * struct scmi_chan_info - Structure representing a SCMI channel informfation
+ * struct scmi_chan_info - Structure representing a SCMI channel information
  *
  * @cl: Mailbox Client
  * @chan: Transmit/Receive mailbox channel
@@ -190,7 +190,7 @@ static void scmi_fetch_response(struct scmi_xfer *xfer,
 				struct scmi_shared_mem __iomem *mem)
 {
 	xfer->hdr.status = ioread32(mem->msg_payload);
-	/* Skip the length of header and statues in payload area i.e 8 bytes*/
+	/* Skip the length of header and status in payload area i.e 8 bytes */
 	xfer->rx.len = min_t(size_t, xfer->rx.len, ioread32(&mem->length) - 8);
 
 	/* Take a copy to the rx buffer.. */
-- 
2.17.1

[PATCH 5/6] firmware: arm_scmi: Use the term 'message' instead of 'command'

[Sudeep Holla]

In preparation to adding support for other two types of messages that
SCMI specification mentions, let's replace the term 'command' with the
correct term 'message'.

As per the specification the messages are of 3 types:
commands(synchronous or asynchronous), delayed responses and notifications.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/common.h | 10 +++++-----
 drivers/firmware/arm_scmi/driver.c |  6 +++---
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 44fd4f9404a9..4349d836b392 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -48,11 +48,11 @@ struct scmi_msg_resp_prot_version {
 /**
  * struct scmi_msg_hdr - Message(Tx/Rx) header
  *
- * @id: The identifier of the command being sent
- * @protocol_id: The identifier of the protocol used to send @id command
- * @seq: The token to identify the message. when a message/command returns,
- *	the platform returns the whole message header unmodified including
- *	the token
+ * @id: The identifier of the message being sent
+ * @protocol_id: The identifier of the protocol used to send @id message
+ * @seq: The token to identify the message. when a message returns, the]
+ *	platform returns the whole message header unmodified including the
+ *	token
  * @status: Status of the transfer once it's complete
  * @poll_completion: Indicate if the transfer needs to be polled for
  *	completion or interrupt mode is used
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index cac255c418b2..69bf85fea967 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -182,7 +182,7 @@ static inline int scmi_to_linux_errno(int errno)
 static inline void scmi_dump_header_dbg(struct device *dev,
 					struct scmi_msg_hdr *hdr)
 {
-	dev_dbg(dev, "Command ID: %x Sequence ID: %x Protocol: %x\n",
+	dev_dbg(dev, "Message ID: %x Sequence ID: %x Protocol: %x\n",
 		hdr->id, hdr->seq, hdr->protocol_id);
 }
 
@@ -241,7 +241,7 @@ static void scmi_rx_callback(struct mbox_client *cl, void *m)
  * @hdr: pointer to header containing all the information on message id,
  *	protocol id and sequence id.
  *
- * Return: 32-bit packed command header to be sent to the platform.
+ * Return: 32-bit packed message header to be sent to the platform.
  */
 static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
 {
@@ -280,7 +280,7 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
  *
  * @handle: Pointer to SCMI entity handle
  *
- * Helper function which is used by various command functions that are
+ * Helper function which is used by various message functions that are
  * exposed to clients of this driver for allocating a message traffic event.
  *
  * This function can sleep depending on pending requests already in the system
-- 
2.17.1

[PATCH 6/6] firmware: arm_scmi: Check if platform has released shmem before using

[Sudeep Holla]

Sometimes platfom may take too long to respond to the command and OS
might timeout before platform transfer the ownership of the shared
memory region to the OS with the response.

Since the mailbox channel associated with the channel is freed and new
commands are dispatch on the same channel, OS needs to wait until it
gets back the ownership. If not, either OS may end up overwriting the
platform response for the last command(which is fine as OS timed out
that command) or platform might overwrite the payload for the next
command with the response for the old.

The latter is problematic as platform may end up interpretting the
response as the payload. In order to avoid such race, let's wait until
the OS gets back the ownership before we prepare the shared memory with
the payload for the next command.

Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/driver.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 69bf85fea967..765573756987 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -265,6 +265,14 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
 	struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
 	struct scmi_shared_mem __iomem *mem = cinfo->payload;
 
+	/*
+	 * Ideally channel must be free by now unless OS timeout last
+	 * request and platform continued to process the same, wait
+	 * until it releases the shared memory, otherwise we may endup
+	 * overwriting it's response with new command payload or vice-versa
+	 */
+	spin_until_cond(ioread32(&mem->channel_status) &
+			SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
 	/* Mark channel busy + clear error */
 	iowrite32(0x0, &mem->channel_status);
 	iowrite32(t->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
-- 
2.17.1

Re: [PATCH 5/6] firmware: arm_scmi: Use the term 'message' instead of 'command'

[Steven Price]

On 08/07/2019 16:43, Sudeep Holla wrote:
> In preparation to adding support for other two types of messages that
> SCMI specification mentions, let's replace the term 'command' with the
> correct term 'message'.
> 
> As per the specification the messages are of 3 types:
> commands(synchronous or asynchronous), delayed responses and notifications.
> 
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
>  drivers/firmware/arm_scmi/common.h | 10 +++++-----
>  drivers/firmware/arm_scmi/driver.c |  6 +++---
>  2 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
> index 44fd4f9404a9..4349d836b392 100644
> --- a/drivers/firmware/arm_scmi/common.h
> +++ b/drivers/firmware/arm_scmi/common.h
> @@ -48,11 +48,11 @@ struct scmi_msg_resp_prot_version {
>  /**
>   * struct scmi_msg_hdr - Message(Tx/Rx) header
>   *
> - * @id: The identifier of the command being sent
> - * @protocol_id: The identifier of the protocol used to send @id command
> - * @seq: The token to identify the message. when a message/command returns,
> - *	the platform returns the whole message header unmodified including
> - *	the token
> + * @id: The identifier of the message being sent
> + * @protocol_id: The identifier of the protocol used to send @id message
> + * @seq: The token to identify the message. when a message returns, the]

Stray ']' at the end of the line.

Steve

> + *	platform returns the whole message header unmodified including the
> + *	token
>   * @status: Status of the transfer once it's complete
>   * @poll_completion: Indicate if the transfer needs to be polled for
>   *	completion or interrupt mode is used
> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> index cac255c418b2..69bf85fea967 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -182,7 +182,7 @@ static inline int scmi_to_linux_errno(int errno)
>  static inline void scmi_dump_header_dbg(struct device *dev,
>  					struct scmi_msg_hdr *hdr)
>  {
> -	dev_dbg(dev, "Command ID: %x Sequence ID: %x Protocol: %x\n",
> +	dev_dbg(dev, "Message ID: %x Sequence ID: %x Protocol: %x\n",
>  		hdr->id, hdr->seq, hdr->protocol_id);
>  }
>  
> @@ -241,7 +241,7 @@ static void scmi_rx_callback(struct mbox_client *cl, void *m)
>   * @hdr: pointer to header containing all the information on message id,
>   *	protocol id and sequence id.
>   *
> - * Return: 32-bit packed command header to be sent to the platform.
> + * Return: 32-bit packed message header to be sent to the platform.
>   */
>  static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
>  {
> @@ -280,7 +280,7 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
>   *
>   * @handle: Pointer to SCMI entity handle
>   *
> - * Helper function which is used by various command functions that are
> + * Helper function which is used by various message functions that are
>   * exposed to clients of this driver for allocating a message traffic event.
>   *
>   * This function can sleep depending on pending requests already in the system
> 

Re: [PATCH 5/6] firmware: arm_scmi: Use the term 'message' instead of 'command'

[Sudeep Holla]

On Mon, Jul 08, 2019 at 05:21:29PM +0100, Steven Price wrote:
> On 08/07/2019 16:43, Sudeep Holla wrote:
> > In preparation to adding support for other two types of messages that
> > SCMI specification mentions, let's replace the term 'command' with the
> > correct term 'message'.
> > 
> > As per the specification the messages are of 3 types:
> > commands(synchronous or asynchronous), delayed responses and notifications.
> > 
> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> > ---
> >  drivers/firmware/arm_scmi/common.h | 10 +++++-----
> >  drivers/firmware/arm_scmi/driver.c |  6 +++---
> >  2 files changed, 8 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
> > index 44fd4f9404a9..4349d836b392 100644
> > --- a/drivers/firmware/arm_scmi/common.h
> > +++ b/drivers/firmware/arm_scmi/common.h
> > @@ -48,11 +48,11 @@ struct scmi_msg_resp_prot_version {
> >  /**
> >   * struct scmi_msg_hdr - Message(Tx/Rx) header
> >   *
> > - * @id: The identifier of the command being sent
> > - * @protocol_id: The identifier of the protocol used to send @id command
> > - * @seq: The token to identify the message. when a message/command returns,
> > - *	the platform returns the whole message header unmodified including
> > - *	the token
> > + * @id: The identifier of the message being sent
> > + * @protocol_id: The identifier of the protocol used to send @id message
> > + * @seq: The token to identify the message. when a message returns, the]
> 
> Stray ']' at the end of the line.
> 

Thanks for spotting, will fix it.

--
Regards,
Sudeep