[PATCH AUTOSEL 4.14 1/8] MIPS: ath79: fix ar933x uart parity mode

[PATCH AUTOSEL 4.14 1/8] MIPS: ath79: fix ar933x uart parity mode

[Sasha Levin]

From: Stefan Hellermann <stefan@the2masters.de>

[ Upstream commit db13a5ba2732755cf13320f3987b77cf2a71e790 ]

While trying to get the uart with parity working I found setting even
parity enabled odd parity insted. Fix the register settings to match
the datasheet of AR9331.

A similar patch was created by 8devices, but not sent upstream.
https://github.com/8devices/openwrt-8devices/commit/77c5586ade3bb72cda010afad3f209ed0c98ea7c

Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/mach-ath79/ar933x_uart.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart.h b/arch/mips/include/asm/mach-ath79/ar933x_uart.h
index c2917b39966b..bba2c8837951 100644
--- a/arch/mips/include/asm/mach-ath79/ar933x_uart.h
+++ b/arch/mips/include/asm/mach-ath79/ar933x_uart.h
@@ -27,8 +27,8 @@
 #define AR933X_UART_CS_PARITY_S		0
 #define AR933X_UART_CS_PARITY_M		0x3
 #define	  AR933X_UART_CS_PARITY_NONE	0
-#define	  AR933X_UART_CS_PARITY_ODD	1
-#define	  AR933X_UART_CS_PARITY_EVEN	2
+#define	  AR933X_UART_CS_PARITY_ODD	2
+#define	  AR933X_UART_CS_PARITY_EVEN	3
 #define AR933X_UART_CS_IF_MODE_S	2
 #define AR933X_UART_CS_IF_MODE_M	0x3
 #define	  AR933X_UART_CS_IF_MODE_NONE	0
-- 
2.20.1

[PATCH AUTOSEL 4.14 2/8] MIPS: fix build on non-linux hosts

[Sasha Levin]

From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

[ Upstream commit 1196364f21ffe5d1e6d83cafd6a2edb89404a3ae ]

calc_vmlinuz_load_addr.c requires SZ_64K to be defined for alignment
purposes.  It included "../../../../include/linux/sizes.h" to define
that size, however "sizes.h" tries to include <linux/const.h> which
assumes linux system headers.  These may not exist eg. the following
error was encountered when building Linux for OpenWrt under macOS:

In file included from arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:16:
arch/mips/boot/compressed/../../../../include/linux/sizes.h:11:10: fatal error: 'linux/const.h' file not found
         ^~~~~~~~~~

Change makefile to force building on local linux headers instead of
system headers.  Also change eye-watering relative reference in include
file spec.

Thanks to Jo-Philip Wich & Petr Štetiar for assistance in tracking this
down & fixing.

Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/compressed/Makefile                 | 2 ++
 arch/mips/boot/compressed/calc_vmlinuz_load_addr.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index adce180f3ee4..331b9e0a8072 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -75,6 +75,8 @@ OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
 $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
 	$(call if_changed,objcopy)
 
+HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE)
+
 # Calculate the load address of the compressed kernel image
 hostprogs-y := calc_vmlinuz_load_addr
 
diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
index 542c3ede9722..d14f75ec8273 100644
--- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
+++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
@@ -13,7 +13,7 @@
 #include <stdint.h>
 #include <stdio.h>
 #include <stdlib.h>
-#include "../../../../include/linux/sizes.h"
+#include <linux/sizes.h>
 
 int main(int argc, char *argv[])
 {
-- 
2.20.1

[PATCH AUTOSEL 4.14 3/8] arm64/efi: Mark __efistub_stext_offset as an absolute symbol explicitly

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit aa69fb62bea15126e744af2e02acc0d6cf3ed4da ]

After r363059 and r363928 in LLVM, a build using ld.lld as the linker
with CONFIG_RANDOMIZE_BASE enabled fails like so:

ld.lld: error: relocation R_AARCH64_ABS32 cannot be used against symbol
__efistub_stext_offset; recompile with -fPIC

Fangrui and Peter figured out that ld.lld is incorrectly considering
__efistub_stext_offset as a relative symbol because of the order in
which symbols are evaluated. _text is treated as an absolute symbol
and stext is a relative symbol, making __efistub_stext_offset a
relative symbol.

Adding ABSOLUTE will force ld.lld to evalute this expression in the
right context and does not change ld.bfd's behavior. ld.lld will
need to be fixed but the developers do not see a quick or simple fix
without some research (see the linked issue for further explanation).
Add this simple workaround so that ld.lld can continue to link kernels.

Link: https://github.com/ClangBuiltLinux/linux/issues/561
Link: https://github.com/llvm/llvm-project/commit/025a815d75d2356f2944136269aa5874721ec236
Link: https://github.com/llvm/llvm-project/commit/249fde85832c33f8b06c6b4ac65d1c4b96d23b83
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Debugged-by: Fangrui Song <maskray@google.com>
Debugged-by: Peter Smith <peter.smith@linaro.org>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[will: add comment]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/image.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h
index 40f9f0b078a4..12af2ba8d558 100644
--- a/arch/arm64/kernel/image.h
+++ b/arch/arm64/kernel/image.h
@@ -73,7 +73,11 @@
 
 #ifdef CONFIG_EFI
 
-__efistub_stext_offset = stext - _text;
+/*
+ * Use ABSOLUTE() to avoid ld.lld treating this as a relative symbol:
+ * https://github.com/ClangBuiltLinux/linux/issues/561
+ */
+__efistub_stext_offset = ABSOLUTE(stext - _text);
 
 /*
  * The EFI stub has its own symbol namespace prefixed by __efistub_, to
-- 
2.20.1

[PATCH AUTOSEL 4.14 4/8] KVM: x86: degrade WARN to pr_warn_ratelimited

[Sasha Levin]

From: Paolo Bonzini <pbonzini@redhat.com>

[ Upstream commit 3f16a5c318392cbb5a0c7a3d19dff8c8ef3c38ee ]

This warning can be triggered easily by userspace, so it should certainly not
cause a panic if panic_on_warn is set.

Reported-by: syzbot+c03f30b4f4c46bdf8575@syzkaller.appspotmail.com
Suggested-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/x86.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 858dd0d89b02..a8526042d176 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1392,7 +1392,7 @@ static int set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale)
 			vcpu->arch.tsc_always_catchup = 1;
 			return 0;
 		} else {
-			WARN(1, "user requested TSC rate below hardware speed\n");
+			pr_warn_ratelimited("user requested TSC rate below hardware speed\n");
 			return -1;
 		}
 	}
@@ -1402,8 +1402,8 @@ static int set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale)
 				user_tsc_khz, tsc_khz);
 
 	if (ratio == 0 || ratio >= kvm_max_tsc_scaling_ratio) {
-		WARN_ONCE(1, "Invalid TSC scaling ratio - virtual-tsc-khz=%u\n",
-			  user_tsc_khz);
+		pr_warn_ratelimited("Invalid TSC scaling ratio - virtual-tsc-khz=%u\n",
+			            user_tsc_khz);
 		return -1;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 5/8] scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported

[Sasha Levin]

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit 5dd6c49339126c2c8df2179041373222362d6e49 ]

If the CHAP_A value is not supported, the chap_server_open() function
should free the auth_protocol pointer and set it to NULL, or we will leave
a dangling pointer around.

[   66.010905] Unsupported CHAP_A value
[   66.011660] Security negotiation failed.
[   66.012443] iSCSI Login negotiation failed.
[   68.413924] general protection fault: 0000 [#1] SMP PTI
[   68.414962] CPU: 0 PID: 1562 Comm: targetcli Kdump: loaded Not tainted 4.18.0-80.el8.x86_64 #1
[   68.416589] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[   68.417677] RIP: 0010:__kmalloc_track_caller+0xc2/0x210

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target_auth.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c
index 4e680d753941..e2fa3a3bc81d 100644
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -89,6 +89,12 @@ static int chap_check_algorithm(const char *a_str)
 	return CHAP_DIGEST_UNKNOWN;
 }
 
+static void chap_close(struct iscsi_conn *conn)
+{
+	kfree(conn->auth_protocol);
+	conn->auth_protocol = NULL;
+}
+
 static struct iscsi_chap *chap_server_open(
 	struct iscsi_conn *conn,
 	struct iscsi_node_auth *auth,
@@ -126,7 +132,7 @@ static struct iscsi_chap *chap_server_open(
 	case CHAP_DIGEST_UNKNOWN:
 	default:
 		pr_err("Unsupported CHAP_A value\n");
-		kfree(conn->auth_protocol);
+		chap_close(conn);
 		return NULL;
 	}
 
@@ -141,19 +147,13 @@ static struct iscsi_chap *chap_server_open(
 	 * Generate Challenge.
 	 */
 	if (chap_gen_challenge(conn, 1, aic_str, aic_len) < 0) {
-		kfree(conn->auth_protocol);
+		chap_close(conn);
 		return NULL;
 	}
 
 	return chap;
 }
 
-static void chap_close(struct iscsi_conn *conn)
-{
-	kfree(conn->auth_protocol);
-	conn->auth_protocol = NULL;
-}
-
 static int chap_server_compute_md5(
 	struct iscsi_conn *conn,
 	struct iscsi_node_auth *auth,
-- 
2.20.1

[PATCH AUTOSEL 4.14 6/8] drm/imx: notify drm core before sending event during crtc disable

[Sasha Levin]

From: Robert Beckett <bob.beckett@collabora.com>

[ Upstream commit 78c68e8f5cd24bd32ba4ca1cdfb0c30cf0642685 ]

Notify drm core before sending pending events during crtc disable.
This fixes the first event after disable having an old stale timestamp
by having drm_crtc_vblank_off update the timestamp to now.

This was seen while debugging weston log message:
Warning: computed repaint delay is insane: -8212 msec

This occurred due to:
1. driver starts up
2. fbcon comes along and restores fbdev, enabling vblank
3. vblank_disable_fn fires via timer disabling vblank, keeping vblank
seq number and time set at current value
(some time later)
4. weston starts and does a modeset
5. atomic commit disables crtc while it does the modeset
6. ipu_crtc_atomic_disable sends vblank with old seq number and time

Fixes: a474478642d5 ("drm/imx: fix crtc vblank state regression")

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/imx/ipuv3-crtc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index 957fbf8c55eb..7845202d0486 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -99,14 +99,14 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc,
 	ipu_dc_disable(ipu);
 	ipu_prg_disable(ipu);
 
+	drm_crtc_vblank_off(crtc);
+
 	spin_lock_irq(&crtc->dev->event_lock);
 	if (crtc->state->event) {
 		drm_crtc_send_vblank_event(crtc, crtc->state->event);
 		crtc->state->event = NULL;
 	}
 	spin_unlock_irq(&crtc->dev->event_lock);
-
-	drm_crtc_vblank_off(crtc);
 }
 
 static void imx_drm_crtc_reset(struct drm_crtc *crtc)
-- 
2.20.1

[PATCH AUTOSEL 4.14 7/8] drm/imx: only send event on crtc disable if kept disabled

[Sasha Levin]

From: Robert Beckett <bob.beckett@collabora.com>

[ Upstream commit 5aeab2bfc9ffa72d3ca73416635cb3785dfc076f ]

The event will be sent as part of the vblank enable during the modeset
if the crtc is not being kept disabled.

Fixes: 5f2f911578fb ("drm/imx: atomic phase 3 step 1: Use atomic configuration")

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/imx/ipuv3-crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index 7845202d0486..12dd261fc308 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -102,7 +102,7 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc,
 	drm_crtc_vblank_off(crtc);
 
 	spin_lock_irq(&crtc->dev->event_lock);
-	if (crtc->state->event) {
+	if (crtc->state->event && !crtc->state->active) {
 		drm_crtc_send_vblank_event(crtc, crtc->state->event);
 		crtc->state->event = NULL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 8/8] dmaengine: imx-sdma: fix use-after-free on probe error path

[Sasha Levin]

From: Sven Van Asbroeck <thesven73@gmail.com>

[ Upstream commit 2b8066c3deb9140fdf258417a51479b2aeaa7622 ]

If probe() fails anywhere beyond the point where
sdma_get_firmware() is called, then a kernel oops may occur.

Problematic sequence of events:
1. probe() calls sdma_get_firmware(), which schedules the
   firmware callback to run when firmware becomes available,
   using the sdma instance structure as the context
2. probe() encounters an error, which deallocates the
   sdma instance structure
3. firmware becomes available, firmware callback is
   called with deallocated sdma instance structure
4. use after free - kernel oops !

Solution: only attempt to load firmware when we're certain
that probe() will succeed. This guarantees that the firmware
callback's context will remain valid.

Note that the remove() path is unaffected by this issue: the
firmware loader will increment the driver module's use count,
ensuring that the module cannot be unloaded while the
firmware callback is pending or running.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
[vkoul: fixed braces for if condition]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/imx-sdma.c | 48 ++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 21 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index a67ec1bdc4e0..80798958706c 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1821,27 +1821,6 @@ static int sdma_probe(struct platform_device *pdev)
 	if (pdata && pdata->script_addrs)
 		sdma_add_scripts(sdma, pdata->script_addrs);
 
-	if (pdata) {
-		ret = sdma_get_firmware(sdma, pdata->fw_name);
-		if (ret)
-			dev_warn(&pdev->dev, "failed to get firmware from platform data\n");
-	} else {
-		/*
-		 * Because that device tree does not encode ROM script address,
-		 * the RAM script in firmware is mandatory for device tree
-		 * probe, otherwise it fails.
-		 */
-		ret = of_property_read_string(np, "fsl,sdma-ram-script-name",
-					      &fw_name);
-		if (ret)
-			dev_warn(&pdev->dev, "failed to get firmware name\n");
-		else {
-			ret = sdma_get_firmware(sdma, fw_name);
-			if (ret)
-				dev_warn(&pdev->dev, "failed to get firmware from device tree\n");
-		}
-	}
-
 	sdma->dma_device.dev = &pdev->dev;
 
 	sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources;
@@ -1883,6 +1862,33 @@ static int sdma_probe(struct platform_device *pdev)
 		of_node_put(spba_bus);
 	}
 
+	/*
+	 * Kick off firmware loading as the very last step:
+	 * attempt to load firmware only if we're not on the error path, because
+	 * the firmware callback requires a fully functional and allocated sdma
+	 * instance.
+	 */
+	if (pdata) {
+		ret = sdma_get_firmware(sdma, pdata->fw_name);
+		if (ret)
+			dev_warn(&pdev->dev, "failed to get firmware from platform data\n");
+	} else {
+		/*
+		 * Because that device tree does not encode ROM script address,
+		 * the RAM script in firmware is mandatory for device tree
+		 * probe, otherwise it fails.
+		 */
+		ret = of_property_read_string(np, "fsl,sdma-ram-script-name",
+					      &fw_name);
+		if (ret) {
+			dev_warn(&pdev->dev, "failed to get firmware name\n");
+		} else {
+			ret = sdma_get_firmware(sdma, fw_name);
+			if (ret)
+				dev_warn(&pdev->dev, "failed to get firmware from device tree\n");
+		}
+	}
+
 	return 0;
 
 err_register:
-- 
2.20.1