[PATCH AUTOSEL 4.4 01/35] drm/panel: simple: Fix panel_simple_dsi_probe

[PATCH AUTOSEL 4.4 01/35] drm/panel: simple: Fix panel_simple_dsi_probe

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 7ad9db66fafb0f0ad53fd2a66217105da5ddeffe ]

In case mipi_dsi_attach() fails remove the registered panel to avoid added
panel without corresponding device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226081153.31334-1-peter.ujfalusi@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f418c002d323..ecad4d7c6cd1 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1389,7 +1389,14 @@ static int panel_simple_dsi_probe(struct mipi_dsi_device *dsi)
 	dsi->format = desc->format;
 	dsi->lanes = desc->lanes;
 
-	return mipi_dsi_attach(dsi);
+	err = mipi_dsi_attach(dsi);
+	if (err) {
+		struct panel_simple *panel = dev_get_drvdata(&dsi->dev);
+
+		drm_panel_remove(&panel->base);
+	}
+
+	return err;
 }
 
 static int panel_simple_dsi_remove(struct mipi_dsi_device *dsi)
-- 
2.20.1

[PATCH AUTOSEL 4.4 02/35] usb: core: hub: Disable hub-initiated U1/U2

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 561759292774707b71ee61aecc07724905bb7ef1 ]

If the device rejects the control transfer to enable device-initiated
U1/U2 entry, then the device will not initiate U1/U2 transition. To
improve the performance, the downstream port should not initate
transition to U1/U2 to avoid the delay from the device link command
response (no packet can be transmitted while waiting for a response from
the device). If the device has some quirks and does not implement U1/U2,
it may reject all the link state change requests, and the downstream
port may resend and flood the bus with more requests. This will affect
the device performance even further. This patch disables the
hub-initated U1/U2 if the device-initiated U1/U2 entry fails.

Reference: USB 3.2 spec 7.2.4.2.3

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/hub.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6e307de25163..cdd181816d40 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3820,6 +3820,9 @@ static int usb_set_lpm_timeout(struct usb_device *udev,
  * control transfers to set the hub timeout or enable device-initiated U1/U2
  * will be successful.
  *
+ * If the control transfer to enable device-initiated U1/U2 entry fails, then
+ * hub-initiated U1/U2 will be disabled.
+ *
  * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI
  * driver know about it.  If that call fails, it should be harmless, and just
  * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency.
@@ -3874,23 +3877,24 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
 		 * host know that this link state won't be enabled.
 		 */
 		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
-	} else {
-		/* Only a configured device will accept the Set Feature
-		 * U1/U2_ENABLE
-		 */
-		if (udev->actconfig)
-			usb_set_device_initiated_lpm(udev, state, true);
+		return;
+	}
 
-		/* As soon as usb_set_lpm_timeout(timeout) returns 0, the
-		 * hub-initiated LPM is enabled. Thus, LPM is enabled no
-		 * matter the result of usb_set_device_initiated_lpm().
-		 * The only difference is whether device is able to initiate
-		 * LPM.
-		 */
+	/* Only a configured device will accept the Set Feature
+	 * U1/U2_ENABLE
+	 */
+	if (udev->actconfig &&
+	    usb_set_device_initiated_lpm(udev, state, true) == 0) {
 		if (state == USB3_LPM_U1)
 			udev->usb3_lpm_u1_enabled = 1;
 		else if (state == USB3_LPM_U2)
 			udev->usb3_lpm_u2_enabled = 1;
+	} else {
+		/* Don't request U1/U2 entry if the device
+		 * cannot transition to U1/U2.
+		 */
+		usb_set_lpm_timeout(udev, state, 0);
+		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 03/35] tty: max310x: Fix invalid baudrate divisors calculator

[Sasha Levin]

From: Serge Semin <fancer.lancer@gmail.com>

[ Upstream commit 35240ba26a932b279a513f66fa4cabfd7af55221 ]

Current calculator doesn't do it' job quite correct. First of all the
max310x baud-rates generator supports the divisor being less than 16.
In this case the x2/x4 modes can be used to double or quadruple
the reference frequency. But the current baud-rate setter function
just filters all these modes out by the first condition and setups
these modes only if there is a clocks-baud division remainder. The former
doesn't seem right at all, since enabling the x2/x4 modes causes the line
noise tolerance reduction and should be only used as a last resort to
enable a requested too high baud-rate.

Finally the fraction is supposed to be calculated from D = Fref/(c*baud)
formulae, but not from D % 16, which causes the precision loss. So to speak
the current baud-rate calculator code works well only if the baud perfectly
fits to the uart reference input frequency.

Lets fix the calculator by implementing the algo fully compliant with
the fractional baud-rate generator described in the datasheet:
D = Fref / (c*baud), where c={16,8,4} is the x1/x2/x4 rate mode
respectively, Fref - reference input frequency. The divisor fraction is
calculated from the same formulae, but making sure it is found with a
resolution of 0.0625 (four bits).

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/max310x.c | 51 ++++++++++++++++++++++--------------
 1 file changed, 31 insertions(+), 20 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 0ac0c618954e..a66fb7afecc7 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -486,37 +486,48 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg)
 
 static int max310x_set_baud(struct uart_port *port, int baud)
 {
-	unsigned int mode = 0, clk = port->uartclk, div = clk / baud;
+	unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0;
 
-	/* Check for minimal value for divider */
-	if (div < 16)
-		div = 16;
-
-	if (clk % baud && (div / 16) < 0x8000) {
+	/*
+	 * Calculate the integer divisor first. Select a proper mode
+	 * in case if the requested baud is too high for the pre-defined
+	 * clocks frequency.
+	 */
+	div = port->uartclk / baud;
+	if (div < 8) {
+		/* Mode x4 */
+		c = 4;
+		mode = MAX310X_BRGCFG_4XMODE_BIT;
+	} else if (div < 16) {
 		/* Mode x2 */
+		c = 8;
 		mode = MAX310X_BRGCFG_2XMODE_BIT;
-		clk = port->uartclk * 2;
-		div = clk / baud;
-
-		if (clk % baud && (div / 16) < 0x8000) {
-			/* Mode x4 */
-			mode = MAX310X_BRGCFG_4XMODE_BIT;
-			clk = port->uartclk * 4;
-			div = clk / baud;
-		}
+	} else {
+		c = 16;
 	}
 
-	max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8);
-	max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16);
-	max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode);
+	/* Calculate the divisor in accordance with the fraction coefficient */
+	div /= c;
+	F = c*baud;
+
+	/* Calculate the baud rate fraction */
+	if (div > 0)
+		frac = (16*(port->uartclk % F)) / F;
+	else
+		div = 1;
+
+	max310x_port_write(port, MAX310X_BRGDIVMSB_REG, div >> 8);
+	max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div);
+	max310x_port_write(port, MAX310X_BRGCFG_REG, frac | mode);
 
-	return DIV_ROUND_CLOSEST(clk, div);
+	/* Return the actual baud rate we just programmed */
+	return (16*port->uartclk) / (c*(16*div + frac));
 }
 
 static int max310x_update_best_err(unsigned long f, long *besterr)
 {
 	/* Use baudrate 115200 for calculate error */
-	long err = f % (115200 * 16);
+	long err = f % (460800 * 16);
 
 	if ((*besterr < 0) || (*besterr > err)) {
 		*besterr = err;
-- 
2.20.1

[PATCH AUTOSEL 4.4 04/35] pinctrl: rockchip: fix leaked of_node references

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 3c89c70634bb0b6f48512de873e7a45c7e1fbaa5 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-rockchip.c:3221:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function.
./drivers/pinctrl/pinctrl-rockchip.c:3223:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-gpio@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-rockchip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index a0651128e23a..616055b5e996 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1837,6 +1837,7 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
 						    base,
 						    &rockchip_regmap_config);
 		}
+		of_node_put(node);
 	}
 
 	bank->irq = irq_of_parse_and_map(bank->of_node, 0);
-- 
2.20.1

[PATCH AUTOSEL 4.4 05/35] tty: serial: cpm_uart - fix init when SMC is relocated

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 06aaa3d066db87e8478522d910285141d44b1e58 ]

SMC relocation can also be activated earlier by the bootloader,
so the driver's behaviour cannot rely on selected kernel config.

When the SMC is relocated, CPM_CR_INIT_TRX cannot be used.

But the only thing CPM_CR_INIT_TRX does is to clear the
rstate and tstate registers, so this can be done manually,
even when SMC is not relocated.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9ab921201444 ("cpm_uart: fix non-console port startup bug")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/cpm_uart/cpm_uart_core.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 0040c29f651a..b9e137c03fe3 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -421,7 +421,16 @@ static int cpm_uart_startup(struct uart_port *port)
 			clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
 		}
 		cpm_uart_initbd(pinfo);
-		cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+		if (IS_SMC(pinfo)) {
+			out_be32(&pinfo->smcup->smc_rstate, 0);
+			out_be32(&pinfo->smcup->smc_tstate, 0);
+			out_be16(&pinfo->smcup->smc_rbptr,
+				 in_be16(&pinfo->smcup->smc_rbase));
+			out_be16(&pinfo->smcup->smc_tbptr,
+				 in_be16(&pinfo->smcup->smc_tbase));
+		} else {
+			cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
+		}
 	}
 	/* Install interrupt handler. */
 	retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
@@ -875,16 +884,14 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 
 /*
- *  In case SMC1 is being relocated...
+ *  In case SMC is being relocated...
  */
-#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
 	out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase));
 	out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase));
 	out_be32(&up->smc_rstate, 0);
 	out_be32(&up->smc_tstate, 0);
 	out_be16(&up->smc_brkcr, 1);              /* number of break chars */
 	out_be16(&up->smc_brkec, 0);
-#endif
 
 	/* Set up the uart parameters in the
 	 * parameter ram.
@@ -898,8 +905,6 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	out_be16(&up->smc_brkec, 0);
 	out_be16(&up->smc_brkcr, 1);
 
-	cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
-
 	/* Set UART mode, 8 bit, no parity, one stop.
 	 * Enable receive and transmit.
 	 */
-- 
2.20.1

[PATCH AUTOSEL 4.4 06/35] drm/edid: Fix a missing-check bug in drm_load_edid_firmware()

[Sasha Levin]

From: Gen Zhang <blackgod016574@gmail.com>

[ Upstream commit 9f1f1a2dab38d4ce87a13565cf4dc1b73bef3a5f ]

In drm_load_edid_firmware(), fwstr is allocated by kstrdup(). And fwstr
is dereferenced in the following codes. However, memory allocation
functions such as kstrdup() may fail and returns NULL. Dereferencing
this null pointer may cause the kernel go wrong. Thus we should check
this kstrdup() operation.
Further, if kstrdup() returns NULL, we should return ERR_PTR(-ENOMEM) to
the caller site.

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524023222.GA5302@zhanggen-UX430UQ
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid_load.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
index 698b8c3b09d9..b5f582466609 100644
--- a/drivers/gpu/drm/drm_edid_load.c
+++ b/drivers/gpu/drm/drm_edid_load.c
@@ -280,6 +280,8 @@ int drm_load_edid_firmware(struct drm_connector *connector)
 	 * the last one found one as a fallback.
 	 */
 	fwstr = kstrdup(edid_firmware, GFP_KERNEL);
+	if (!fwstr)
+		return ERR_PTR(-ENOMEM);
 	edidstr = fwstr;
 
 	while ((edidname = strsep(&edidstr, ","))) {
-- 
2.20.1

[PATCH AUTOSEL 4.4 07/35] memstick: Fix error cleanup path of memstick_init

[Sasha Levin]

From: Wang Hai <wanghai26@huawei.com>

[ Upstream commit 65f1a0d39c289bb6fc85635528cd36c4b07f560e ]

If bus_register fails. On its error handling path, it has cleaned up
what it has done. There is no need to call bus_unregister again.
Otherwise, if bus_unregister is called, issues such as null-ptr-deref
will arise.

Syzkaller report this:

kobject_add_internal failed for memstick (error: -12 parent: bus)
BUG: KASAN: null-ptr-deref in sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467
Read of size 8 at addr 0000000000000078 by task syz-executor.0/4460

Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 __kasan_report+0x171/0x18d mm/kasan/report.c:321
 kasan_report+0xe/0x20 mm/kasan/common.c:614
 sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 bus_remove_file+0x6c/0x90 drivers/base/bus.c:145
 remove_probe_files drivers/base/bus.c:599 [inline]
 bus_unregister+0x6e/0x100 drivers/base/bus.c:916 ? 0xffffffffc1590000
 memstick_init+0x7a/0x1000 [memstick]
 do_one_initcall+0xb9/0x3b5 init/main.c:914
 do_init_module+0xe0/0x330 kernel/module.c:3468
 load_module+0x38eb/0x4270 kernel/module.c:3819
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3909
 do_syscall_64+0x72/0x2a0 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: baf8532a147d ("memstick: initial commit for Sony MemoryStick support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai26@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memstick/core/memstick.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index 4d673a626db4..1041eb7a6167 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -629,13 +629,18 @@ static int __init memstick_init(void)
 		return -ENOMEM;
 
 	rc = bus_register(&memstick_bus_type);
-	if (!rc)
-		rc = class_register(&memstick_host_class);
+	if (rc)
+		goto error_destroy_workqueue;
 
-	if (!rc)
-		return 0;
+	rc = class_register(&memstick_host_class);
+	if (rc)
+		goto error_bus_unregister;
+
+	return 0;
 
+error_bus_unregister:
 	bus_unregister(&memstick_bus_type);
+error_destroy_workqueue:
 	destroy_workqueue(workqueue);
 
 	return rc;
-- 
2.20.1

[PATCH AUTOSEL 4.4 08/35] tty/serial: digicolor: Fix digicolor-usart already registered warning

[Sasha Levin]

From: Kefeng Wang <wangkefeng.wang@huawei.com>

[ Upstream commit c7ad9ba0611c53cfe194223db02e3bca015f0674 ]

When modprobe/rmmod/modprobe module, if platform_driver_register() fails,
the kernel complained,

  proc_dir_entry 'driver/digicolor-usart' already registered
  WARNING: CPU: 1 PID: 5636 at fs/proc/generic.c:360 proc_register+0x19d/0x270

Fix this by adding uart_unregister_driver() when platform_driver_register() fails.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/digicolor-usart.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index a80cdad114f3..d8cb94997487 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -544,7 +544,11 @@ static int __init digicolor_uart_init(void)
 	if (ret)
 		return ret;
 
-	return platform_driver_register(&digicolor_uart_platform);
+	ret = platform_driver_register(&digicolor_uart_platform);
+	if (ret)
+		uart_unregister_driver(&digicolor_uart);
+
+	return ret;
 }
 module_init(digicolor_uart_init);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 09/35] tty: serial: msm_serial: avoid system lockup condition

[Sasha Levin]

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>

[ Upstream commit ba3684f99f1b25d2a30b6956d02d339d7acb9799 ]

The function msm_wait_for_xmitr can be taken with interrupts
disabled. In order to avoid a potential system lockup - demonstrated
under stress testing conditions on SoC QCS404/5 - make sure we wait
for a bounded amount of time.

Tested on SoC QCS404.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/msm_serial.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 5f0ded6fc4e9..eaeb098b5d6a 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -222,10 +222,14 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
 
 static inline void msm_wait_for_xmitr(struct uart_port *port)
 {
+	unsigned int timeout = 500000;
+
 	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
 		if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
 			break;
 		udelay(1);
+		if (!timeout--)
+			break;
 	}
 	msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.4 10/35] drm/virtio: Add memory barriers for capset cache.

[Sasha Levin]

From: David Riley <davidriley@chromium.org>

[ Upstream commit 9ff3a5c88e1f1ab17a31402b96d45abe14aab9d7 ]

After data is copied to the cache entry, atomic_set is used indicate
that the data is the entry is valid without appropriate memory barriers.
Similarly the read side was missing the corresponding memory barriers.

Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_ioctl.c | 3 +++
 drivers/gpu/drm/virtio/virtgpu_vq.c    | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_ioctl.c b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
index 6296e9f270ca..0b8f8c10f2ed 100644
--- a/drivers/gpu/drm/virtio/virtgpu_ioctl.c
+++ b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
@@ -535,6 +535,9 @@ static int virtio_gpu_get_caps_ioctl(struct drm_device *dev,
 	ret = wait_event_timeout(vgdev->resp_wq,
 				 atomic_read(&cache_ent->is_valid), 5 * HZ);
 
+	/* is_valid check must proceed before copy of the cache entry. */
+	smp_rmb();
+
 	ptr = cache_ent->caps_cache;
 
 copy_exit:
diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c
index 52436b3c01bb..a1b3ea1ccb65 100644
--- a/drivers/gpu/drm/virtio/virtgpu_vq.c
+++ b/drivers/gpu/drm/virtio/virtgpu_vq.c
@@ -618,6 +618,8 @@ static void virtio_gpu_cmd_capset_cb(struct virtio_gpu_device *vgdev,
 		    cache_ent->id == le32_to_cpu(cmd->capset_id)) {
 			memcpy(cache_ent->caps_cache, resp->capset_data,
 			       cache_ent->size);
+			/* Copy must occur before is_valid is signalled. */
+			smp_wmb();
 			atomic_set(&cache_ent->is_valid, 1);
 			break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.4 11/35] phy: renesas: rcar-gen2: Fix memory leak at error paths

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit d4a36e82924d3305a17ac987a510f3902df5a4b2 ]

This patch fixes memory leak at error paths of the probe function.
In for_each_child_of_node, if the loop returns, the driver should
call of_put_node() before returns.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 1233f59f745b237 ("phy: Renesas R-Car Gen2 PHY driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/phy-rcar-gen2.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c
index c7a05996d5c1..99d2b73654f4 100644
--- a/drivers/phy/phy-rcar-gen2.c
+++ b/drivers/phy/phy-rcar-gen2.c
@@ -287,6 +287,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 		error = of_property_read_u32(np, "reg", &channel_num);
 		if (error || channel_num > 2) {
 			dev_err(dev, "Invalid \"reg\" property\n");
+			of_node_put(np);
 			return error;
 		}
 		channel->select_mask = select_mask[channel_num];
@@ -302,6 +303,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 						   &rcar_gen2_phy_ops);
 			if (IS_ERR(phy->phy)) {
 				dev_err(dev, "Failed to create PHY\n");
+				of_node_put(np);
 				return PTR_ERR(phy->phy);
 			}
 			phy_set_drvdata(phy->phy, phy);
-- 
2.20.1

[PATCH AUTOSEL 4.4 12/35] powerpc/pseries/mobility: prevent cpu hotplug during DT update

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit e59a175faa8df9d674247946f2a5a9c29c835725 ]

CPU online/offline code paths are sensitive to parts of the device
tree (various cpu node properties, cache nodes) that can be changed as
a result of a migration.

Prevent CPU hotplug while the device tree potentially is inconsistent.

Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/mobility.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index c773396d0969..fcd1a32267c4 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -9,6 +9,7 @@
  * 2 as published by the Free Software Foundation.
  */
 
+#include <linux/cpu.h>
 #include <linux/kernel.h>
 #include <linux/kobject.h>
 #include <linux/smp.h>
@@ -309,11 +310,19 @@ void post_mobility_fixup(void)
 	if (rc)
 		printk(KERN_ERR "Post-mobility activate-fw failed: %d\n", rc);
 
+	/*
+	 * We don't want CPUs to go online/offline while the device
+	 * tree is being updated.
+	 */
+	cpus_read_lock();
+
 	rc = pseries_devicetree_update(MIGRATION_SCOPE);
 	if (rc)
 		printk(KERN_ERR "Post-mobility device tree update "
 			"failed: %d\n", rc);
 
+	cpus_read_unlock();
+
 	/* Possibly switch to a new RFI flush type */
 	pseries_setup_rfi_flush();
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 13/35] powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit e610a466d16a086e321f0bd421e2fc75cff28605 ]

It's common for the platform to replace the cache device nodes after a
migration. Since the cacheinfo code is never informed about this, it
never drops its references to the source system's cache nodes, causing
it to wind up in an inconsistent state resulting in warnings and oopses
as soon as CPU online/offline occurs after the migration, e.g.

  cache for /cpus/l3-cache@3113(Unified) refers to cache for /cpus/l2-cache@200d(Unified)
  WARNING: CPU: 15 PID: 86 at arch/powerpc/kernel/cacheinfo.c:176 release_cache+0x1bc/0x1d0
  [...]
  NIP release_cache+0x1bc/0x1d0
  LR  release_cache+0x1b8/0x1d0
  Call Trace:
    release_cache+0x1b8/0x1d0 (unreliable)
    cacheinfo_cpu_offline+0x1c4/0x2c0
    unregister_cpu_online+0x1b8/0x260
    cpuhp_invoke_callback+0x114/0xf40
    cpuhp_thread_fun+0x270/0x310
    smpboot_thread_fn+0x2c8/0x390
    kthread+0x1b8/0x1c0
    ret_from_kernel_thread+0x5c/0x68

Using device tree notifiers won't work since we want to rebuild the
hierarchy only after all the removals and additions have occurred and
the device tree is in a consistent state. Call cacheinfo_teardown()
before processing device tree updates, and rebuild the hierarchy
afterward.

Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/mobility.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index fcd1a32267c4..e85767c74e81 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -22,6 +22,7 @@
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include "pseries.h"
+#include "../../kernel/cacheinfo.h"
 
 static struct kobject *mobility_kobj;
 
@@ -316,11 +317,20 @@ void post_mobility_fixup(void)
 	 */
 	cpus_read_lock();
 
+	/*
+	 * It's common for the destination firmware to replace cache
+	 * nodes.  Release all of the cacheinfo hierarchy's references
+	 * before updating the device tree.
+	 */
+	cacheinfo_teardown();
+
 	rc = pseries_devicetree_update(MIGRATION_SCOPE);
 	if (rc)
 		printk(KERN_ERR "Post-mobility device tree update "
 			"failed: %d\n", rc);
 
+	cacheinfo_rebuild();
+
 	cpus_read_unlock();
 
 	/* Possibly switch to a new RFI flush type */
-- 
2.20.1

[PATCH AUTOSEL 4.4 14/35] usb: gadget: Zero ffs_io_data

[Sasha Levin]

From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

[ Upstream commit 508595515f4bcfe36246e4a565cf280937aeaade ]

In some cases the "Allocate & copy" block in ffs_epfile_io() is not
executed. Consequently, in such a case ffs_alloc_buffer() is never called
and struct ffs_io_data is not initialized properly. This in turn leads to
problems when ffs_free_buffer() is called at the end of ffs_epfile_io().

This patch uses kzalloc() instead of kmalloc() in the aio case and memset()
in non-aio case to properly initialize struct ffs_io_data.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_fs.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 4800bb22cdd6..4cb1355271ec 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -912,11 +912,12 @@ static ssize_t ffs_epfile_write_iter(struct kiocb *kiocb, struct iov_iter *from)
 	ENTER();
 
 	if (!is_sync_kiocb(kiocb)) {
-		p = kmalloc(sizeof(io_data), GFP_KERNEL);
+		p = kzalloc(sizeof(io_data), GFP_KERNEL);
 		if (unlikely(!p))
 			return -ENOMEM;
 		p->aio = true;
 	} else {
+		memset(p, 0, sizeof(*p));
 		p->aio = false;
 	}
 
@@ -948,11 +949,12 @@ static ssize_t ffs_epfile_read_iter(struct kiocb *kiocb, struct iov_iter *to)
 	ENTER();
 
 	if (!is_sync_kiocb(kiocb)) {
-		p = kmalloc(sizeof(io_data), GFP_KERNEL);
+		p = kzalloc(sizeof(io_data), GFP_KERNEL);
 		if (unlikely(!p))
 			return -ENOMEM;
 		p->aio = true;
 	} else {
+		memset(p, 0, sizeof(*p));
 		p->aio = false;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 15/35] powerpc/pci/of: Fix OF flags parsing for 64bit BARs

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit df5be5be8735ef2ae80d5ae1f2453cd81a035c4b ]

When the firmware does PCI BAR resource allocation, it passes the assigned
addresses and flags (prefetch/64bit/...) via the "reg" property of
a PCI device device tree node so the kernel does not need to do
resource allocation.

The flags are stored in resource::flags - the lower byte stores
PCI_BASE_ADDRESS_SPACE/etc bits and the other bytes are IORESOURCE_IO/etc.
Some flags from PCI_BASE_ADDRESS_xxx and IORESOURCE_xxx are duplicated,
such as PCI_BASE_ADDRESS_MEM_PREFETCH/PCI_BASE_ADDRESS_MEM_TYPE_64/etc.
When parsing the "reg" property, we copy the prefetch flag but we skip
on PCI_BASE_ADDRESS_MEM_TYPE_64 which leaves the flags out of sync.

The missing IORESOURCE_MEM_64 flag comes into play under 2 conditions:
1. we remove PCI_PROBE_ONLY for pseries (by hacking pSeries_setup_arch()
or by passing "/chosen/linux,pci-probe-only");
2. we request resource alignment (by passing pci=resource_alignment=
via the kernel cmd line to request PAGE_SIZE alignment or defining
ppc_md.pcibios_default_alignment which returns anything but 0). Note that
the alignment requests are ignored if PCI_PROBE_ONLY is enabled.

With 1) and 2), the generic PCI code in the kernel unconditionally
decides to:
- reassign the BARs in pci_specified_resource_alignment() (works fine)
- write new BARs to the device - this fails for 64bit BARs as the generic
code looks at IORESOURCE_MEM_64 (not set) and writes only lower 32bits
of the BAR and leaves the upper 32bit unmodified which breaks BAR mapping
in the hypervisor.

This fixes the issue by copying the flag. This is useful if we want to
enforce certain BAR alignment per platform as handling subpage sized BARs
is proven to cause problems with hotplug (SLOF already aligns BARs to 64k).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/pci_of_scan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 2e710c15893f..a38d7293460d 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -45,6 +45,8 @@ static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
 	if (addr0 & 0x02000000) {
 		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
 		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+		if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64)
+			flags |= IORESOURCE_MEM_64;
 		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
 		if (addr0 & 0x40000000)
 			flags |= IORESOURCE_PREFETCH
-- 
2.20.1

[PATCH AUTOSEL 4.4 16/35] PCI: sysfs: Ignore lockdep for remove attribute

[Sasha Levin]

From: Marek Vasut <marek.vasut+renesas@gmail.com>

[ Upstream commit dc6b698a86fe40a50525433eb8e92a267847f6f9 ]

With CONFIG_PROVE_LOCKING=y, using sysfs to remove a bridge with a device
below it causes a lockdep warning, e.g.,

  # echo 1 > /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove
  ============================================
  WARNING: possible recursive locking detected
  ...
  pci_bus 0000:01: busn_res: [bus 01] is released

The remove recursively removes the subtree below the bridge.  Each call
uses a different lock so there's no deadlock, but the locks were all
created with the same lockdep key so the lockdep checker can't tell them
apart.

Mark the "remove" sysfs attribute with __ATTR_IGNORE_LOCKDEP() as it is
safe to ignore the lockdep check between different "remove" kernfs
instances.

There's discussion about a similar issue in USB at [1], which resulted in
356c05d58af0 ("sysfs: get rid of some lockdep false positives") and
e9b526fe7048 ("i2c: suppress lockdep warning on delete_device"), which do
basically the same thing for USB "remove" and i2c "delete_device" files.

[1] https://lore.kernel.org/r/Pine.LNX.4.44L0.1204251436140.1206-100000@iolanthe.rowland.org
Link: https://lore.kernel.org/r/20190526225151.3865-1-marek.vasut@gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
[bhelgaas: trim commit log, details at above links]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 5fb4ed6ea322..6ac6618c1c10 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -371,7 +371,7 @@ static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
 		pci_stop_and_remove_bus_device_locked(to_pci_dev(dev));
 	return count;
 }
-static struct device_attribute dev_remove_attr = __ATTR(remove,
+static struct device_attribute dev_remove_attr = __ATTR_IGNORE_LOCKDEP(remove,
 							(S_IWUSR|S_IWGRP),
 							NULL, remove_store);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 17/35] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit 05b8bcc96278c9ef927a6f25a98e233e55de42e1 ]

The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/accel/st_accel_buffer.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index a1e642ee13d6..4f838277184a 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -46,17 +46,19 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 		goto allocate_memory_error;
 	}
 
-	err = st_sensors_set_axis_enable(indio_dev,
-					(u8)indio_dev->active_scan_mask[0]);
+	err = iio_triggered_buffer_postenable(indio_dev);
 	if (err < 0)
 		goto st_accel_buffer_postenable_error;
 
-	err = iio_triggered_buffer_postenable(indio_dev);
+	err = st_sensors_set_axis_enable(indio_dev,
+					(u8)indio_dev->active_scan_mask[0]);
 	if (err < 0)
-		goto st_accel_buffer_postenable_error;
+		goto st_sensors_set_axis_enable_error;
 
 	return err;
 
+st_sensors_set_axis_enable_error:
+	iio_triggered_buffer_predisable(indio_dev);
 st_accel_buffer_postenable_error:
 	kfree(adata->buffer_data);
 allocate_memory_error:
@@ -65,20 +67,22 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 
 static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
 {
-	int err;
+	int err, err2;
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 
-	err = iio_triggered_buffer_predisable(indio_dev);
-	if (err < 0)
-		goto st_accel_buffer_predisable_error;
-
 	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
 	if (err < 0)
 		goto st_accel_buffer_predisable_error;
 
 	err = st_sensors_set_enable(indio_dev, false);
+	if (err < 0)
+		goto st_accel_buffer_predisable_error;
 
 st_accel_buffer_predisable_error:
+	err2 = iio_triggered_buffer_predisable(indio_dev);
+	if (!err)
+		err = err2;
+
 	kfree(adata->buffer_data);
 	return err;
 }
-- 
2.20.1

Re: [PATCH AUTOSEL 4.4 17/35] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions

[Jonathan Cameron]

On Fri, 19 Jul 2019 00:14:05 -0400
Sasha Levin <sashal@kernel.org> wrote:

> From: Alexandru Ardelean <alexandru.ardelean@analog.com>
> 
> [ Upstream commit 05b8bcc96278c9ef927a6f25a98e233e55de42e1 ]
> 
> The iio_triggered_buffer_{predisable,postenable} functions attach/detach
> the poll functions.
> 
> For the predisable hook, the disable code should occur before detaching
> the poll func, and for the postenable hook, the poll func should be
> attached before the enable code.
> 
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> Acked-by: Denis Ciocca <denis.ciocca@st.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
Hi Sasha,

This should do any harm, but I deliberately didn't cc stable on
this one.

Alex, my assumption on this one is that it was fixing a logical
ordering problem, but one that had no visible impact.
Whilst the pollfunc will be attached too early, the trigger
will be disabled for the whole of this function anyway so
it shouldn't cause any visible problem.  Is that a correct interpretation?
There are going to be a few more similar fixes in the near future
as Alex is trying to tidy up various paths so we can do a general
bit of refactoring.

If I'm too late for this, then not a problem, just noise
in the stable release.

Jonathan


> ---
>  drivers/iio/accel/st_accel_buffer.c | 22 +++++++++++++---------
>  1 file changed, 13 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
> index a1e642ee13d6..4f838277184a 100644
> --- a/drivers/iio/accel/st_accel_buffer.c
> +++ b/drivers/iio/accel/st_accel_buffer.c
> @@ -46,17 +46,19 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
>  		goto allocate_memory_error;
>  	}
>  
> -	err = st_sensors_set_axis_enable(indio_dev,
> -					(u8)indio_dev->active_scan_mask[0]);
> +	err = iio_triggered_buffer_postenable(indio_dev);
>  	if (err < 0)
>  		goto st_accel_buffer_postenable_error;
>  
> -	err = iio_triggered_buffer_postenable(indio_dev);
> +	err = st_sensors_set_axis_enable(indio_dev,
> +					(u8)indio_dev->active_scan_mask[0]);
>  	if (err < 0)
> -		goto st_accel_buffer_postenable_error;
> +		goto st_sensors_set_axis_enable_error;
>  
>  	return err;
>  
> +st_sensors_set_axis_enable_error:
> +	iio_triggered_buffer_predisable(indio_dev);
>  st_accel_buffer_postenable_error:
>  	kfree(adata->buffer_data);
>  allocate_memory_error:
> @@ -65,20 +67,22 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
>  
>  static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
>  {
> -	int err;
> +	int err, err2;
>  	struct st_sensor_data *adata = iio_priv(indio_dev);
>  
> -	err = iio_triggered_buffer_predisable(indio_dev);
> -	if (err < 0)
> -		goto st_accel_buffer_predisable_error;
> -
>  	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
>  	if (err < 0)
>  		goto st_accel_buffer_predisable_error;
>  
>  	err = st_sensors_set_enable(indio_dev, false);
> +	if (err < 0)
> +		goto st_accel_buffer_predisable_error;
>  
>  st_accel_buffer_predisable_error:
> +	err2 = iio_triggered_buffer_predisable(indio_dev);
> +	if (!err)
> +		err = err2;
> +
>  	kfree(adata->buffer_data);
>  	return err;
>  }

Re: [PATCH AUTOSEL 4.4 17/35] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions

[Ardelean, Alexandru]

On Sun, 2019-07-21 at 18:23 +0100, Jonathan Cameron wrote:
> [External]
> 
> On Fri, 19 Jul 2019 00:14:05 -0400
> Sasha Levin <sashal@kernel.org> wrote:
> 
> > From: Alexandru Ardelean <alexandru.ardelean@analog.com>
> > 
> > [ Upstream commit 05b8bcc96278c9ef927a6f25a98e233e55de42e1 ]
> > 
> > The iio_triggered_buffer_{predisable,postenable} functions attach/detach
> > the poll functions.
> > 
> > For the predisable hook, the disable code should occur before detaching
> > the poll func, and for the postenable hook, the poll func should be
> > attached before the enable code.
> > 
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> > Acked-by: Denis Ciocca <denis.ciocca@st.com>
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> Hi Sasha,
> 
> This should do any harm, but I deliberately didn't cc stable on
> this one.
> 
> Alex, my assumption on this one is that it was fixing a logical
> ordering problem, but one that had no visible impact.
> Whilst the pollfunc will be attached too early, the trigger
> will be disabled for the whole of this function anyway so
> it shouldn't cause any visible problem.  Is that a correct interpretation?

Yes.
That is correct.

Maybe I'll change the commit title format so that there is no confusion.
It's a fix, but not in the sense that something was broken.
Just something that is the realm of cleaning up.

Thanks
Alex

> There are going to be a few more similar fixes in the near future
> as Alex is trying to tidy up various paths so we can do a general
> bit of refactoring.
> 
> If I'm too late for this, then not a problem, just noise
> in the stable release.
> 
> Jonathan
> 
> 
> > ---
> >  drivers/iio/accel/st_accel_buffer.c | 22 +++++++++++++---------
> >  1 file changed, 13 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
> > index a1e642ee13d6..4f838277184a 100644
> > --- a/drivers/iio/accel/st_accel_buffer.c
> > +++ b/drivers/iio/accel/st_accel_buffer.c
> > @@ -46,17 +46,19 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
> >  		goto allocate_memory_error;
> >  	}
> >  
> > -	err = st_sensors_set_axis_enable(indio_dev,
> > -					(u8)indio_dev->active_scan_mask[0]);
> > +	err = iio_triggered_buffer_postenable(indio_dev);
> >  	if (err < 0)
> >  		goto st_accel_buffer_postenable_error;
> >  
> > -	err = iio_triggered_buffer_postenable(indio_dev);
> > +	err = st_sensors_set_axis_enable(indio_dev,
> > +					(u8)indio_dev->active_scan_mask[0]);
> >  	if (err < 0)
> > -		goto st_accel_buffer_postenable_error;
> > +		goto st_sensors_set_axis_enable_error;
> >  
> >  	return err;
> >  
> > +st_sensors_set_axis_enable_error:
> > +	iio_triggered_buffer_predisable(indio_dev);
> >  st_accel_buffer_postenable_error:
> >  	kfree(adata->buffer_data);
> >  allocate_memory_error:
> > @@ -65,20 +67,22 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
> >  
> >  static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
> >  {
> > -	int err;
> > +	int err, err2;
> >  	struct st_sensor_data *adata = iio_priv(indio_dev);
> >  
> > -	err = iio_triggered_buffer_predisable(indio_dev);
> > -	if (err < 0)
> > -		goto st_accel_buffer_predisable_error;
> > -
> >  	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
> >  	if (err < 0)
> >  		goto st_accel_buffer_predisable_error;
> >  
> >  	err = st_sensors_set_enable(indio_dev, false);
> > +	if (err < 0)
> > +		goto st_accel_buffer_predisable_error;
> >  
> >  st_accel_buffer_predisable_error:
> > +	err2 = iio_triggered_buffer_predisable(indio_dev);
> > +	if (!err)
> > +		err = err2;
> > +
> >  	kfree(adata->buffer_data);
> >  	return err;
> >  }

Re: [PATCH AUTOSEL 4.4 17/35] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions

[Sasha Levin]

On Mon, Jul 22, 2019 at 06:47:47AM +0000, Ardelean, Alexandru wrote:
>On Sun, 2019-07-21 at 18:23 +0100, Jonathan Cameron wrote:
>> [External]
>>
>> On Fri, 19 Jul 2019 00:14:05 -0400
>> Sasha Levin <sashal@kernel.org> wrote:
>>
>> > From: Alexandru Ardelean <alexandru.ardelean@analog.com>
>> >
>> > [ Upstream commit 05b8bcc96278c9ef927a6f25a98e233e55de42e1 ]
>> >
>> > The iio_triggered_buffer_{predisable,postenable} functions attach/detach
>> > the poll functions.
>> >
>> > For the predisable hook, the disable code should occur before detaching
>> > the poll func, and for the postenable hook, the poll func should be
>> > attached before the enable code.
>> >
>> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
>> > Acked-by: Denis Ciocca <denis.ciocca@st.com>
>> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>> > Signed-off-by: Sasha Levin <sashal@kernel.org>
>> Hi Sasha,
>>
>> This should do any harm, but I deliberately didn't cc stable on
>> this one.
>>
>> Alex, my assumption on this one is that it was fixing a logical
>> ordering problem, but one that had no visible impact.
>> Whilst the pollfunc will be attached too early, the trigger
>> will be disabled for the whole of this function anyway so
>> it shouldn't cause any visible problem.  Is that a correct interpretation?
>
>Yes.
>That is correct.
>
>Maybe I'll change the commit title format so that there is no confusion.
>It's a fix, but not in the sense that something was broken.
>Just something that is the realm of cleaning up.

I'll drop it from the queue, thanks!

--
Thanks,
Sasha

[PATCH AUTOSEL 4.4 18/35] iio: iio-utils: Fix possible incorrect mask calculation

[Sasha Levin]

From: Bastien Nocera <hadess@hadess.net>

[ Upstream commit 208a68c8393d6041a90862992222f3d7943d44d6 ]

On some machines, iio-sensor-proxy was returning all 0's for IIO sensor
values. It turns out that the bits_used for this sensor is 32, which makes
the mask calculation:

*mask = (1 << 32) - 1;

If the compiler interprets the 1 literals as 32-bit ints, it generates
undefined behavior depending on compiler version and optimization level.
On my system, it optimizes out the shift, so the mask value becomes

*mask = (1) - 1;

With a mask value of 0, iio-sensor-proxy will always return 0 for every axis.

Avoid incorrect 0 values caused by compiler optimization.

See original fix by Brett Dutro <brett.dutro@gmail.com> in
iio-sensor-proxy:
https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/iio/iio_utils.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c
index 5eb6793f3972..2d0dcd6fc64c 100644
--- a/tools/iio/iio_utils.c
+++ b/tools/iio/iio_utils.c
@@ -163,9 +163,9 @@ int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
 			*be = (endianchar == 'b');
 			*bytes = padint / 8;
 			if (*bits_used == 64)
-				*mask = ~0;
+				*mask = ~(0ULL);
 			else
-				*mask = (1ULL << *bits_used) - 1;
+				*mask = (1ULL << *bits_used) - 1ULL;
 
 			*is_signed = (signchar == 's');
 			if (fclose(sysfsfp)) {
-- 
2.20.1

Re: [PATCH AUTOSEL 4.4 18/35] iio: iio-utils: Fix possible incorrect mask calculation

[Jonathan Cameron]

On Fri, 19 Jul 2019 00:14:06 -0400
Sasha Levin <sashal@kernel.org> wrote:

> From: Bastien Nocera <hadess@hadess.net>
> 
> [ Upstream commit 208a68c8393d6041a90862992222f3d7943d44d6 ]
> 
> On some machines, iio-sensor-proxy was returning all 0's for IIO sensor
> values. It turns out that the bits_used for this sensor is 32, which makes
> the mask calculation:
> 
> *mask = (1 << 32) - 1;
> 
> If the compiler interprets the 1 literals as 32-bit ints, it generates
> undefined behavior depending on compiler version and optimization level.
> On my system, it optimizes out the shift, so the mask value becomes
> 
> *mask = (1) - 1;
> 
> With a mask value of 0, iio-sensor-proxy will always return 0 for every axis.
> 
> Avoid incorrect 0 values caused by compiler optimization.
> 
> See original fix by Brett Dutro <brett.dutro@gmail.com> in
> iio-sensor-proxy:
> https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3
> 
> Signed-off-by: Bastien Nocera <hadess@hadess.net>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
Good catch, I should have cc'd stable on this one.

Thanks,

Jonathan

> ---
>  tools/iio/iio_utils.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c
> index 5eb6793f3972..2d0dcd6fc64c 100644
> --- a/tools/iio/iio_utils.c
> +++ b/tools/iio/iio_utils.c
> @@ -163,9 +163,9 @@ int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
>  			*be = (endianchar == 'b');
>  			*bytes = padint / 8;
>  			if (*bits_used == 64)
> -				*mask = ~0;
> +				*mask = ~(0ULL);
>  			else
> -				*mask = (1ULL << *bits_used) - 1;
> +				*mask = (1ULL << *bits_used) - 1ULL;
>  
>  			*is_signed = (signchar == 's');
>  			if (fclose(sysfsfp)) {

[PATCH AUTOSEL 4.4 19/35] recordmcount: Fix spurious mcount entries on powerpc

[Sasha Levin]

From: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>

[ Upstream commit 80e5302e4bc85a6b685b7668c36c6487b5f90e9a ]

An impending change to enable HAVE_C_RECORDMCOUNT on powerpc leads to
warnings such as the following:

  # modprobe kprobe_example
  ftrace-powerpc: Not expected bl: opcode is 3c4c0001
  WARNING: CPU: 0 PID: 227 at kernel/trace/ftrace.c:2001 ftrace_bug+0x90/0x318
  Modules linked in:
  CPU: 0 PID: 227 Comm: modprobe Not tainted 5.2.0-rc6-00678-g1c329100b942 #2
  NIP:  c000000000264318 LR: c00000000025d694 CTR: c000000000f5cd30
  REGS: c000000001f2b7b0 TRAP: 0700   Not tainted  (5.2.0-rc6-00678-g1c329100b942)
  MSR:  900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 28228222  XER: 00000000
  CFAR: c0000000002642fc IRQMASK: 0
  <snip>
  NIP [c000000000264318] ftrace_bug+0x90/0x318
  LR [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0
  Call Trace:
  [c000000001f2ba40] [0000000000000004] 0x4 (unreliable)
  [c000000001f2bad0] [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0
  [c000000001f2bb90] [c00000000020ff10] load_module+0x25b0/0x30c0
  [c000000001f2bd00] [c000000000210cb0] sys_finit_module+0xc0/0x130
  [c000000001f2be20] [c00000000000bda4] system_call+0x5c/0x70
  Instruction dump:
  419e0018 2f83ffff 419e00bc 2f83ffea 409e00cc 4800001c 0fe00000 3c62ff96
  39000001 39400000 386386d0 480000c4 <0fe00000> 3ce20003 39000001 3c62ff96
  ---[ end trace 4c438d5cebf78381 ]---
  ftrace failed to modify
  [<c0080000012a0008>] 0xc0080000012a0008
   actual:   01:00:4c:3c
  Initializing ftrace call sites
  ftrace record flags: 2000000
   (0)
   expected tramp: c00000000006af4c

Looking at the relocation records in __mcount_loc shows a few spurious
entries:

  RELOCATION RECORDS FOR [__mcount_loc]:
  OFFSET           TYPE              VALUE
  0000000000000000 R_PPC64_ADDR64    .text.unlikely+0x0000000000000008
  0000000000000008 R_PPC64_ADDR64    .text.unlikely+0x0000000000000014
  0000000000000010 R_PPC64_ADDR64    .text.unlikely+0x0000000000000060
  0000000000000018 R_PPC64_ADDR64    .text.unlikely+0x00000000000000b4
  0000000000000020 R_PPC64_ADDR64    .init.text+0x0000000000000008
  0000000000000028 R_PPC64_ADDR64    .init.text+0x0000000000000014

The first entry in each section is incorrect. Looking at the
relocation records, the spurious entries correspond to the
R_PPC64_ENTRY records:

  RELOCATION RECORDS FOR [.text.unlikely]:
  OFFSET           TYPE              VALUE
  0000000000000000 R_PPC64_REL64     .TOC.-0x0000000000000008
  0000000000000008 R_PPC64_ENTRY     *ABS*
  0000000000000014 R_PPC64_REL24     _mcount
  <snip>

The problem is that we are not validating the return value from
get_mcountsym() in sift_rel_mcount(). With this entry, mcountsym is 0,
but Elf_r_sym(relp) also ends up being 0. Fix this by ensuring
mcountsym is valid before processing the entry.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/recordmcount.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
index b9897e2be404..04151ede8043 100644
--- a/scripts/recordmcount.h
+++ b/scripts/recordmcount.h
@@ -326,7 +326,8 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 		if (!mcountsym)
 			mcountsym = get_mcountsym(sym0, relp, str0);
 
-		if (mcountsym == Elf_r_sym(relp) && !is_fake_mcount(relp)) {
+		if (mcountsym && mcountsym == Elf_r_sym(relp) &&
+				!is_fake_mcount(relp)) {
 			uint_t const addend =
 				_w(_w(relp->r_offset) - recval + mcount_adjust);
 			mrelp->r_offset = _w(offbase
-- 
2.20.1

[PATCH AUTOSEL 4.4 20/35] mfd: core: Set fwnode for created devices

[Sasha Levin]

From: Robert Hancock <hancock@sedsystems.ca>

[ Upstream commit c176c6d7e932662668bcaec2d763657096589d85 ]

The logic for setting the of_node on devices created by mfd did not set
the fwnode pointer to match, which caused fwnode-based APIs to
malfunction on these devices since the fwnode pointer was null. Fix
this.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/mfd-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 022c9374ce8b..215bb5eeb5ac 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -178,6 +178,7 @@ static int mfd_add_device(struct device *parent, int id,
 		for_each_child_of_node(parent->of_node, np) {
 			if (of_device_is_compatible(np, cell->of_compatible)) {
 				pdev->dev.of_node = np;
+				pdev->dev.fwnode = &np->fwnode;
 				break;
 			}
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.4 21/35] mfd: arizona: Fix undefined behavior

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 5da6cbcd2f395981aa9bfc571ace99f1c786c985 ]

When the driver is used with a subdevice that is disabled in the
kernel configuration, clang gets a little confused about the
control flow and fails to notice that n_subdevs is only
uninitialized when subdevs is NULL, and we check for that,
leading to a false-positive warning:

drivers/mfd/arizona-core.c:1423:19: error: variable 'n_subdevs' is uninitialized when used here
      [-Werror,-Wuninitialized]
                              subdevs, n_subdevs, NULL, 0, NULL);
                                       ^~~~~~~~~
drivers/mfd/arizona-core.c:999:15: note: initialize the variable 'n_subdevs' to silence this warning
        int n_subdevs, ret, i;
                     ^
                      = 0

Ideally, we would rearrange the code to avoid all those early
initializations and have an explicit exit in each disabled case,
but it's much easier to chicken out and add one more initialization
here to shut up the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/arizona-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index d474732cc65c..fb54de5c1aba 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -967,7 +967,7 @@ int arizona_dev_init(struct arizona *arizona)
 	unsigned int reg, val, mask;
 	int (*apply_patch)(struct arizona *) = NULL;
 	const struct mfd_cell *subdevs = NULL;
-	int n_subdevs, ret, i;
+	int n_subdevs = 0, ret, i;
 
 	dev_set_drvdata(arizona->dev, arizona);
 	mutex_init(&arizona->clk_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.4 22/35] um: Silence lockdep complaint about mmap_sem

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 80bf6ceaf9310b3f61934c69b382d4912deee049 ]

When we get into activate_mm(), lockdep complains that we're doing
something strange:

    WARNING: possible circular locking dependency detected
    5.1.0-10252-gb00152307319-dirty #121 Not tainted
    ------------------------------------------------------
    inside.sh/366 is trying to acquire lock:
    (____ptrval____) (&(&p->alloc_lock)->rlock){+.+.}, at: flush_old_exec+0x703/0x8d7

    but task is already holding lock:
    (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&mm->mmap_sem){++++}:
           [...]
           __lock_acquire+0x12ab/0x139f
           lock_acquire+0x155/0x18e
           down_write+0x3f/0x98
           flush_old_exec+0x748/0x8d7
           load_elf_binary+0x2ca/0xddb
           [...]

    -> #0 (&(&p->alloc_lock)->rlock){+.+.}:
           [...]
           __lock_acquire+0x12ab/0x139f
           lock_acquire+0x155/0x18e
           _raw_spin_lock+0x30/0x83
           flush_old_exec+0x703/0x8d7
           load_elf_binary+0x2ca/0xddb
           [...]

    other info that might help us debug this:

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(&mm->mmap_sem);
                                   lock(&(&p->alloc_lock)->rlock);
                                   lock(&mm->mmap_sem);
      lock(&(&p->alloc_lock)->rlock);

     *** DEADLOCK ***

    2 locks held by inside.sh/366:
     #0: (____ptrval____) (&sig->cred_guard_mutex){+.+.}, at: __do_execve_file+0x12d/0x869
     #1: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7

    stack backtrace:
    CPU: 0 PID: 366 Comm: inside.sh Not tainted 5.1.0-10252-gb00152307319-dirty #121
    Stack:
     [...]
    Call Trace:
     [<600420de>] show_stack+0x13b/0x155
     [<6048906b>] dump_stack+0x2a/0x2c
     [<6009ae64>] print_circular_bug+0x332/0x343
     [<6009c5c6>] check_prev_add+0x669/0xdad
     [<600a06b4>] __lock_acquire+0x12ab/0x139f
     [<6009f3d0>] lock_acquire+0x155/0x18e
     [<604a07e0>] _raw_spin_lock+0x30/0x83
     [<60151e6a>] flush_old_exec+0x703/0x8d7
     [<601a8eb8>] load_elf_binary+0x2ca/0xddb
     [...]

I think it's because in exec_mmap() we have

	down_read(&old_mm->mmap_sem);
...
        task_lock(tsk);
...
	activate_mm(active_mm, mm);
	(which does down_write(&mm->mmap_sem))

I'm not really sure why lockdep throws in the whole knowledge
about the task lock, but it seems that old_mm and mm shouldn't
ever be the same (and it doesn't deadlock) so tell lockdep that
they're different.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/include/asm/mmu_context.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/um/include/asm/mmu_context.h b/arch/um/include/asm/mmu_context.h
index 941527e507f7..f618f45fc8e9 100644
--- a/arch/um/include/asm/mmu_context.h
+++ b/arch/um/include/asm/mmu_context.h
@@ -42,7 +42,7 @@ static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
 	 * when the new ->mm is used for the first time.
 	 */
 	__switch_mm(&new->context.id);
-	down_write(&new->mmap_sem);
+	down_write_nested(&new->mmap_sem, 1);
 	uml_setup_stubs(new);
 	up_write(&new->mmap_sem);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.4 23/35] powerpc/4xx/uic: clear pending interrupt after irq type/pol change

[Sasha Levin]

From: Christian Lamparter <chunkeey@gmail.com>

[ Upstream commit 3ab3a0689e74e6aa5b41360bc18861040ddef5b1 ]

When testing out gpio-keys with a button, a spurious
interrupt (and therefore a key press or release event)
gets triggered as soon as the driver enables the irq
line for the first time.

This patch clears any potential bogus generated interrupt
that was caused by the switching of the associated irq's
type and polarity.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/uic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 6893d8f236df..225346dda151 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -158,6 +158,7 @@ static int uic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 
 	mtdcr(uic->dcrbase + UIC_PR, pr);
 	mtdcr(uic->dcrbase + UIC_TR, tr);
+	mtdcr(uic->dcrbase + UIC_SR, ~mask);
 
 	raw_spin_unlock_irqrestore(&uic->lock, flags);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 24/35] serial: sh-sci: Fix TX DMA buffer flushing and workqueue races

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 8493eab02608b0e82f67b892aa72882e510c31d0 ]

When uart_flush_buffer() is called, the .flush_buffer() callback zeroes
the tx_dma_len field.  This may race with the work queue function
handling transmit DMA requests:

  1. If the buffer is flushed before the first DMA API call,
     dmaengine_prep_slave_single() may be called with a zero length,
     causing the DMA request to never complete, leading to messages
     like:

        rcar-dmac e7300000.dma-controller: Channel Address Error happen

     and, with debug enabled:

	sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126

     and DMA timeouts.

  2. If the buffer is flushed after the first DMA API call, but before
     the second, dma_sync_single_for_device() may be called with a zero
     length, causing the transmit data not to be flushed to RAM, and
     leading to stale data being output.

Fix this by:
  1. Letting sci_dma_tx_work_fn() return immediately if the transmit
     buffer is empty,
  2. Extending the critical section to cover all DMA preparational work,
     so tx_dma_len stays consistent for all of it,
  3. Using local copies of circ_buf.head and circ_buf.tail, to make sure
     they match the actual operation above.

Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Suggested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20190624123540.20629-2-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/sh-sci.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 669134e27ed9..c450e32c153d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1203,6 +1203,7 @@ static void work_fn_tx(struct work_struct *work)
 	struct uart_port *port = &s->port;
 	struct circ_buf *xmit = &port->state->xmit;
 	dma_addr_t buf;
+	int head, tail;
 
 	/*
 	 * DMA is idle now.
@@ -1212,16 +1213,23 @@ static void work_fn_tx(struct work_struct *work)
 	 * consistent xmit buffer state.
 	 */
 	spin_lock_irq(&port->lock);
-	buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1));
+	head = xmit->head;
+	tail = xmit->tail;
+	buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1));
 	s->tx_dma_len = min_t(unsigned int,
-		CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
-		CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
-	spin_unlock_irq(&port->lock);
+		CIRC_CNT(head, tail, UART_XMIT_SIZE),
+		CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE));
+	if (!s->tx_dma_len) {
+		/* Transmit buffer has been flushed */
+		spin_unlock_irq(&port->lock);
+		return;
+	}
 
 	desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
 					   DMA_MEM_TO_DEV,
 					   DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
+		spin_unlock_irq(&port->lock);
 		dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
 		/* switch to PIO */
 		sci_tx_dma_release(s, true);
@@ -1231,20 +1239,20 @@ static void work_fn_tx(struct work_struct *work)
 	dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
 				   DMA_TO_DEVICE);
 
-	spin_lock_irq(&port->lock);
 	desc->callback = sci_dma_tx_complete;
 	desc->callback_param = s;
-	spin_unlock_irq(&port->lock);
 	s->cookie_tx = dmaengine_submit(desc);
 	if (dma_submit_error(s->cookie_tx)) {
+		spin_unlock_irq(&port->lock);
 		dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
 		/* switch to PIO */
 		sci_tx_dma_release(s, true);
 		return;
 	}
 
+	spin_unlock_irq(&port->lock);
 	dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
-		__func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+		__func__, xmit->buf, tail, head, s->cookie_tx);
 
 	dma_async_issue_pending(chan);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.4 25/35] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30

[Sasha Levin]

From: Vidya Sagar <vidyas@nvidia.com>

[ Upstream commit 7be142caabc4780b13a522c485abc806de5c4114 ]

The PCI Tegra controller conversion to a device tree configurable
driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver
to drivers/pci/host") implied that code for the driver can be
compiled in for a kernel supporting multiple platforms.

Unfortunately, a blind move of the code did not check that some of the
quirks that were applied in arch/arm (eg enabling Relaxed Ordering on
all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID
for both Vendor-ID and Device-ID) are now applied in all kernels that
compile the PCI Tegra controlled driver, DT and ACPI alike.

This is completely wrong, in that enablement of Relaxed Ordering is only
required by default in Tegra20 platforms as described in the Tegra20
Technical Reference Manual (available at
https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in
Section 34.1, where it is mentioned that Relaxed Ordering bit needs to
be enabled in its root ports to avoid deadlock in hardware) and in the
Tegra30 platforms for the same reasons (unfortunately not documented
in the TRM).

There is no other strict requirement on PCI devices Relaxed Ordering
enablement on any other Tegra platforms or PCI host bridge driver.

Fix this quite upsetting situation by limiting the vendor and device IDs
to which the Relaxed Ordering quirk applies to the root ports in
question, reported above.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pci-tegra.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 30323114c53c..9865793b538a 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -586,12 +586,15 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_fixup_class);
 
-/* Tegra PCIE requires relaxed ordering */
+/* Tegra20 and Tegra30 PCIE requires relaxed ordering */
 static void tegra_pcie_relax_enable(struct pci_dev *dev)
 {
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1c, tegra_pcie_relax_enable);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0e1d, tegra_pcie_relax_enable);
 
 static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 {
-- 
2.20.1

[PATCH AUTOSEL 4.4 26/35] kallsyms: exclude kasan local symbols on s390

[Sasha Levin]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit 33177f01ca3fe550146bb9001bec2fd806b2f40c ]

gcc asan instrumentation emits the following sequence to store frame pc
when the kernel is built with CONFIG_RELOCATABLE:
debug/vsprintf.s:
        .section        .data.rel.ro.local,"aw"
        .align  8
.LC3:
        .quad   .LASANPC4826@GOTOFF
.text
        .align  8
        .type   number, @function
number:
.LASANPC4826:

and in case reloc is issued for LASANPC label it also gets into .symtab
with the same address as actual function symbol:
$ nm -n vmlinux | grep 0000000001397150
0000000001397150 t .LASANPC4826
0000000001397150 t number

In the end kernel backtraces are almost unreadable:
[  143.748476] Call Trace:
[  143.748484] ([<000000002da3e62c>] .LASANPC2671+0x114/0x190)
[  143.748492]  [<000000002eca1a58>] .LASANPC2612+0x110/0x160
[  143.748502]  [<000000002de9d830>] print_address_description+0x80/0x3b0
[  143.748511]  [<000000002de9dd64>] __kasan_report+0x15c/0x1c8
[  143.748521]  [<000000002ecb56d4>] strrchr+0x34/0x60
[  143.748534]  [<000003ff800a9a40>] kasan_strings+0xb0/0x148 [test_kasan]
[  143.748547]  [<000003ff800a9bba>] kmalloc_tests_init+0xe2/0x528 [test_kasan]
[  143.748555]  [<000000002da2117c>] .LASANPC4069+0x354/0x748
[  143.748563]  [<000000002dbfbb16>] do_init_module+0x136/0x3b0
[  143.748571]  [<000000002dbff3f4>] .LASANPC3191+0x2164/0x25d0
[  143.748580]  [<000000002dbffc4c>] .LASANPC3196+0x184/0x1b8
[  143.748587]  [<000000002ecdf2ec>] system_call+0xd8/0x2d8

Since LASANPC labels are not even unique and get into .symtab only due
to relocs filter them out in kallsyms.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kallsyms.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 8fa81e84e295..d117c68d1607 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -158,6 +158,9 @@ static int read_symbol(FILE *in, struct sym_entry *s)
 	/* exclude debugging symbols */
 	else if (stype == 'N')
 		return -1;
+	/* exclude s390 kasan local symbols */
+	else if (!strncmp(sym, ".LASANPC", 8))
+		return -1;
 
 	/* include the type field in the symbol name, so that it gets
 	 * compressed together */
-- 
2.20.1

[PATCH AUTOSEL 4.4 27/35] perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning

[Sasha Levin]

From: Numfor Mbiziwo-Tiapo <nums@google.com>

[ Upstream commit 4e4cf62b37da5ff45c904a3acf242ab29ed5881d ]

Running the 'perf test' command after building perf with a memory
sanitizer causes a warning that says:

  WARNING: MemorySanitizer: use-of-uninitialized-value... in mmap-thread-lookup.c

Initializing the go variable to 0 silences this harmless warning.

Committer warning:

This was harmless, just a simple test writing whatever was at that
sizeof(int) memory area just to signal another thread blocked reading
that file created with pipe(). Initialize it tho so that we don't get
this warning.

Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190702173716.181223-1-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/mmap-thread-lookup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/tests/mmap-thread-lookup.c b/tools/perf/tests/mmap-thread-lookup.c
index 145050e2e544..195ba31e2f35 100644
--- a/tools/perf/tests/mmap-thread-lookup.c
+++ b/tools/perf/tests/mmap-thread-lookup.c
@@ -49,7 +49,7 @@ static void *thread_fn(void *arg)
 {
 	struct thread_data *td = arg;
 	ssize_t ret;
-	int go;
+	int go = 0;
 
 	if (thread_init(td))
 		return NULL;
-- 
2.20.1

[PATCH AUTOSEL 4.4 28/35] f2fs: avoid out-of-range memory access

[Sasha Levin]

From: Ocean Chen <oceanchen@google.com>

[ Upstream commit 56f3ce675103e3fb9e631cfb4131fc768bc23e9a ]

blkoff_off might over 512 due to fs corrupt or security
vulnerability. That should be checked before being using.

Use ENTRIES_IN_SUM to protect invalid value in cur_data_blkoff.

Signed-off-by: Ocean Chen <oceanchen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 6802cd754eda..014bee5c0e75 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -1510,6 +1510,11 @@ static int read_compacted_summaries(struct f2fs_sb_info *sbi)
 		seg_i = CURSEG_I(sbi, i);
 		segno = le32_to_cpu(ckpt->cur_data_segno[i]);
 		blk_off = le16_to_cpu(ckpt->cur_data_blkoff[i]);
+		if (blk_off > ENTRIES_IN_SUM) {
+			f2fs_bug_on(sbi, 1);
+			f2fs_put_page(page, 1);
+			return -EFAULT;
+		}
 		seg_i->next_segno = segno;
 		reset_curseg(sbi, i, 0);
 		seg_i->alloc_type = ckpt->alloc_type[i];
-- 
2.20.1

[PATCH AUTOSEL 4.4 29/35] mailbox: handle failed named mailbox channel request

[Sasha Levin]

From: morten petersen <morten_bp@live.dk>

[ Upstream commit 25777e5784a7b417967460d4fcf9660d05a0c320 ]

Previously, if mbox_request_channel_byname was used with a name
which did not exist in the "mbox-names" property of a mailbox
client, the mailbox corresponding to the last entry in the
"mbox-names" list would be incorrectly selected.
With this patch, -EINVAL is returned if the named mailbox is
not found.

Signed-off-by: Morten Borup Petersen <morten_bp@live.dk>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mailbox/mailbox.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c
index 9cf826df89b1..b4ad85251cf7 100644
--- a/drivers/mailbox/mailbox.c
+++ b/drivers/mailbox/mailbox.c
@@ -389,11 +389,13 @@ struct mbox_chan *mbox_request_channel_byname(struct mbox_client *cl,
 
 	of_property_for_each_string(np, "mbox-names", prop, mbox_name) {
 		if (!strncmp(name, mbox_name, strlen(name)))
-			break;
+			return mbox_request_channel(cl, index);
 		index++;
 	}
 
-	return mbox_request_channel(cl, index);
+	dev_err(cl->dev, "%s() could not locate channel named \"%s\"\n",
+		__func__, name);
+	return ERR_PTR(-EINVAL);
 }
 EXPORT_SYMBOL_GPL(mbox_request_channel_byname);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 30/35] powerpc/eeh: Handle hugepages in ioremap space

[Sasha Levin]

From: Oliver O'Halloran <oohall@gmail.com>

[ Upstream commit 33439620680be5225c1b8806579a291e0d761ca0 ]

In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap
space") support for using hugepages in the vmalloc and ioremap areas was
enabled for radix. Unfortunately this broke EEH MMIO error checking.

Detection works by inserting a hook which checks the results of the
ioreadXX() set of functions.  When a read returns a 0xFFs response we
need to check for an error which we do by mapping the (virtual) MMIO
address back to a physical address, then mapping physical address to a
PCI device via an interval tree.

When translating virt -> phys we currently assume the ioremap space is
only populated by PAGE_SIZE mappings. If a hugepage mapping is found we
emit a WARN_ON(), but otherwise handles the check as though a normal
page was found. In pathalogical cases such as copying a buffer
containing a lot of 0xFFs from BAR memory this can result in the system
not booting because it's too busy printing WARN_ON()s.

There's no real reason to assume huge pages can't be present and we're
prefectly capable of handling them, so do that.

Fixes: 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190710150517.27114-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/eeh.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 6696c1986844..16193d7b0635 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -363,10 +363,19 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
 					   NULL, &hugepage_shift);
 	if (!ptep)
 		return token;
-	WARN_ON(hugepage_shift);
-	pa = pte_pfn(*ptep) << PAGE_SHIFT;
 
-	return pa | (token & (PAGE_SIZE-1));
+	pa = pte_pfn(*ptep);
+
+	/* On radix we can do hugepage mappings for io, so handle that */
+	if (hugepage_shift) {
+		pa <<= hugepage_shift;
+		pa |= token & ((1ul << hugepage_shift) - 1);
+	} else {
+		pa <<= PAGE_SHIFT;
+		pa |= token & (PAGE_SIZE - 1);
+	}
+
+	return pa;
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.4 31/35] sh: prevent warnings when using iounmap

[Sasha Levin]

From: Sam Ravnborg <sam@ravnborg.org>

[ Upstream commit 733f0025f0fb43e382b84db0930ae502099b7e62 ]

When building drm/exynos for sh, as part of an allmodconfig build, the
following warning triggered:

  exynos7_drm_decon.c: In function `decon_remove':
  exynos7_drm_decon.c:769:24: warning: unused variable `ctx'
    struct decon_context *ctx = dev_get_drvdata(&pdev->dev);

The ctx variable is only used as argument to iounmap().

In sh - allmodconfig CONFIG_MMU is not defined
so it ended up in:

\#define __iounmap(addr)	do { } while (0)
\#define iounmap		__iounmap

Fix the warning by introducing a static inline function for iounmap.

This is similar to several other architectures.

Link: http://lkml.kernel.org/r/20190622114208.24427-1-sam@ravnborg.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/include/asm/io.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 3280a6bfa503..b2592c3864ad 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -370,7 +370,11 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
 
 #define ioremap_nocache	ioremap
 #define ioremap_uc	ioremap
-#define iounmap		__iounmap
+
+static inline void iounmap(void __iomem *addr)
+{
+	__iounmap(addr);
+}
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
-- 
2.20.1

[PATCH AUTOSEL 4.4 32/35] mm/kmemleak.c: fix check for softirq context

[Sasha Levin]

From: Dmitry Vyukov <dvyukov@google.com>

[ Upstream commit 6ef9056952532c3b746de46aa10d45b4d7797bd8 ]

in_softirq() is a wrong predicate to check if we are in a softirq
context.  It also returns true if we have BH disabled, so objects are
falsely stamped with "softirq" comm.  The correct predicate is
in_serving_softirq().

If user does cat from /sys/kernel/debug/kmemleak previously they would
see this, which is clearly wrong, this is system call context (see the
comm):

unreferenced object 0xffff88805bd661c0 (size 64):
  comm "softirq", pid 0, jiffies 4294942959 (age 12.400s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00  ................
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000007dcb30c>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<0000000007dcb30c>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<0000000007dcb30c>] slab_alloc mm/slab.c:3326 [inline]
    [<0000000007dcb30c>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<00000000969722b7>] kmalloc include/linux/slab.h:547 [inline]
    [<00000000969722b7>] kzalloc include/linux/slab.h:742 [inline]
    [<00000000969722b7>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
    [<00000000969722b7>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
    [<00000000a4134b5f>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
    [<00000000d20248ad>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957
    [<000000003d367be7>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
    [<000000003c7c76af>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
    [<000000000c1aeb23>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130
    [<000000000157b92b>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078
    [<00000000a9f3d058>] __do_sys_setsockopt net/socket.c:2089 [inline]
    [<00000000a9f3d058>] __se_sys_setsockopt net/socket.c:2086 [inline]
    [<00000000a9f3d058>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
    [<000000001b8da885>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301
    [<00000000ba770c62>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

now they will see this:

unreferenced object 0xffff88805413c800 (size 64):
  comm "syz-executor.4", pid 8960, jiffies 4294994003 (age 14.350s)
  hex dump (first 32 bytes):
    00 7a 8a 57 80 88 ff ff e0 00 00 01 00 00 00 00  .z.W............
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000c5d3be64>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<00000000c5d3be64>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<00000000c5d3be64>] slab_alloc mm/slab.c:3326 [inline]
    [<00000000c5d3be64>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<0000000023865be2>] kmalloc include/linux/slab.h:547 [inline]
    [<0000000023865be2>] kzalloc include/linux/slab.h:742 [inline]
    [<0000000023865be2>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
    [<0000000023865be2>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
    [<000000003029a9d4>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
    [<00000000ccd0a87c>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957
    [<00000000a85a3785>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
    [<00000000ec13c18d>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
    [<0000000052d748e3>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130
    [<00000000512f1014>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078
    [<00000000181758bc>] __do_sys_setsockopt net/socket.c:2089 [inline]
    [<00000000181758bc>] __se_sys_setsockopt net/socket.c:2086 [inline]
    [<00000000181758bc>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
    [<00000000d4b73623>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301
    [<00000000c1098bec>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Link: http://lkml.kernel.org/r/20190517171507.96046-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/kmemleak.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 84c93879aa5d..4d675318754e 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -566,7 +566,7 @@ static struct kmemleak_object *create_object(unsigned long ptr, size_t size,
 	if (in_irq()) {
 		object->pid = 0;
 		strncpy(object->comm, "hardirq", sizeof(object->comm));
-	} else if (in_softirq()) {
+	} else if (in_serving_softirq()) {
 		object->pid = 0;
 		strncpy(object->comm, "softirq", sizeof(object->comm));
 	} else {
-- 
2.20.1

[PATCH AUTOSEL 4.4 33/35] 9p: pass the correct prototype to read_cache_page

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit f053cbd4366051d7eb6ba1b8d529d20f719c2963 ]

Fix the callback 9p passes to read_cache_page to actually have the
proper type expected.  Casting around function pointers can easily
hide typing bugs, and defeats control flow protection.

Link: http://lkml.kernel.org/r/20190520055731.24538-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/9p/vfs_addr.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c
index e9e04376c52c..e80ad0c7c2a9 100644
--- a/fs/9p/vfs_addr.c
+++ b/fs/9p/vfs_addr.c
@@ -49,8 +49,9 @@
  * @page: structure to page
  *
  */
-static int v9fs_fid_readpage(struct p9_fid *fid, struct page *page)
+static int v9fs_fid_readpage(void *data, struct page *page)
 {
+	struct p9_fid *fid = data;
 	struct inode *inode = page->mapping->host;
 	struct bio_vec bvec = {.bv_page = page, .bv_len = PAGE_SIZE};
 	struct iov_iter to;
@@ -121,7 +122,8 @@ static int v9fs_vfs_readpages(struct file *filp, struct address_space *mapping,
 	if (ret == 0)
 		return ret;
 
-	ret = read_cache_pages(mapping, pages, (void *)v9fs_vfs_readpage, filp);
+	ret = read_cache_pages(mapping, pages, v9fs_fid_readpage,
+			filp->private_data);
 	p9_debug(P9_DEBUG_VFS, "  = %d\n", ret);
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.4 34/35] mm/mmu_notifier: use hlist_add_head_rcu()

[Sasha Levin]

From: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>

[ Upstream commit 543bdb2d825fe2400d6e951f1786d92139a16931 ]

Make mmu_notifier_register() safer by issuing a memory barrier before
registering a new notifier.  This fixes a theoretical bug on weakly
ordered CPUs.  For example, take this simplified use of notifiers by a
driver:

	my_struct->mn.ops = &my_ops; /* (1) */
	mmu_notifier_register(&my_struct->mn, mm)
		...
		hlist_add_head(&mn->hlist, &mm->mmu_notifiers); /* (2) */
		...

Once mmu_notifier_register() releases the mm locks, another thread can
invalidate a range:

	mmu_notifier_invalidate_range()
		...
		hlist_for_each_entry_rcu(mn, &mm->mmu_notifiers, hlist) {
			if (mn->ops->invalidate_range)

The read side relies on the data dependency between mn and ops to ensure
that the pointer is properly initialized.  But the write side doesn't have
any dependency between (1) and (2), so they could be reordered and the
readers could dereference an invalid mn->ops.  mmu_notifier_register()
does take all the mm locks before adding to the hlist, but those have
acquire semantics which isn't sufficient.

By calling hlist_add_head_rcu() instead of hlist_add_head() we update the
hlist using a store-release, ensuring that readers see prior
initialization of my_struct.  This situation is better illustated by
litmus test MP+onceassign+derefonce.

Link: http://lkml.kernel.org/r/20190502133532.24981-1-jean-philippe.brucker@arm.com
Fixes: cddb8a5c14aa ("mmu-notifiers: core")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/mmu_notifier.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c
index 5fbdd367bbed..ad90b8f85223 100644
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -286,7 +286,7 @@ static int do_mmu_notifier_register(struct mmu_notifier *mn,
 	 * thanks to mm_take_all_locks().
 	 */
 	spin_lock(&mm->mmu_notifier_mm->lock);
-	hlist_add_head(&mn->hlist, &mm->mmu_notifier_mm->list);
+	hlist_add_head_rcu(&mn->hlist, &mm->mmu_notifier_mm->list);
 	spin_unlock(&mm->mmu_notifier_mm->lock);
 
 	mm_drop_all_locks(mm);
-- 
2.20.1

[PATCH AUTOSEL 4.4 35/35] locking/lockdep: Fix lock used or unused stats error

[Sasha Levin]

From: Yuyang Du <duyuyang@gmail.com>

[ Upstream commit 68d41d8c94a31dfb8233ab90b9baf41a2ed2da68 ]

The stats variable nr_unused_locks is incremented every time a new lock
class is register and decremented when the lock is first used in
__lock_acquire(). And after all, it is shown and checked in lockdep_stats.

However, under configurations that either CONFIG_TRACE_IRQFLAGS or
CONFIG_PROVE_LOCKING is not defined:

The commit:

  091806515124b20 ("locking/lockdep: Consolidate lock usage bit initialization")

missed marking the LOCK_USED flag at IRQ usage initialization because
as mark_usage() is not called. And the commit:

  886532aee3cd42d ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING")

further made mark_lock() not defined such that the LOCK_USED cannot be
marked at all when the lock is first acquired.

As a result, we fix this by not showing and checking the stats under such
configurations for lockdep_stats.

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Yuyang Du <duyuyang@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: arnd@arndb.de
Cc: frederic@kernel.org
Link: https://lkml.kernel.org/r/20190709101522.9117-1-duyuyang@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep_proc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/kernel/locking/lockdep_proc.c b/kernel/locking/lockdep_proc.c
index dbb61a302548..9778b6701019 100644
--- a/kernel/locking/lockdep_proc.c
+++ b/kernel/locking/lockdep_proc.c
@@ -227,6 +227,7 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
 		      nr_hardirq_read_safe = 0, nr_hardirq_read_unsafe = 0,
 		      sum_forward_deps = 0;
 
+#ifdef CONFIG_PROVE_LOCKING
 	list_for_each_entry(class, &all_lock_classes, lock_entry) {
 
 		if (class->usage_mask == 0)
@@ -258,12 +259,12 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
 		if (class->usage_mask & LOCKF_ENABLED_HARDIRQ_READ)
 			nr_hardirq_read_unsafe++;
 
-#ifdef CONFIG_PROVE_LOCKING
 		sum_forward_deps += lockdep_count_forward_deps(class);
-#endif
 	}
 #ifdef CONFIG_DEBUG_LOCKDEP
 	DEBUG_LOCKS_WARN_ON(debug_atomic_read(nr_unused_locks) != nr_unused);
+#endif
+
 #endif
 	seq_printf(m, " lock-classes:                  %11lu [max: %lu]\n",
 			nr_lock_classes, MAX_LOCKDEP_KEYS);
-- 
2.20.1