[PATCH] net: sfc: falcon: convert to i2c_new_dummy_device

[PATCH] net: sfc: falcon: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Only build tested. Part of a tree-wide move to deprecate
i2c_new_dummy().

 drivers/net/ethernet/sfc/falcon/falcon_boards.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/sfc/falcon/falcon_boards.c b/drivers/net/ethernet/sfc/falcon/falcon_boards.c
index 839189dab98e..189ce9b9dfa7 100644
--- a/drivers/net/ethernet/sfc/falcon/falcon_boards.c
+++ b/drivers/net/ethernet/sfc/falcon/falcon_boards.c
@@ -454,13 +454,13 @@ static int sfe4001_init(struct ef4_nic *efx)
 
 #if IS_ENABLED(CONFIG_SENSORS_LM90)
 	board->hwmon_client =
-		i2c_new_device(&board->i2c_adap, &sfe4001_hwmon_info);
+		i2c_new_client_device(&board->i2c_adap, &sfe4001_hwmon_info);
 #else
 	board->hwmon_client =
-		i2c_new_dummy(&board->i2c_adap, sfe4001_hwmon_info.addr);
+		i2c_new_dummy_device(&board->i2c_adap, sfe4001_hwmon_info.addr);
 #endif
-	if (!board->hwmon_client)
-		return -EIO;
+	if (IS_ERR(board->hwmon_client))
+		return PTR_ERR(board->hwmon_client);
 
 	/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
 	rc = i2c_smbus_write_byte_data(board->hwmon_client,
@@ -468,9 +468,9 @@ static int sfe4001_init(struct ef4_nic *efx)
 	if (rc)
 		goto fail_hwmon;
 
-	board->ioexp_client = i2c_new_dummy(&board->i2c_adap, PCA9539);
-	if (!board->ioexp_client) {
-		rc = -EIO;
+	board->ioexp_client = i2c_new_dummy_device(&board->i2c_adap, PCA9539);
+	if (IS_ERR(board->ioexp_client)) {
+		rc = PTR_ERR(board->ioexp_client);
 		goto fail_hwmon;
 	}
 
-- 
2.20.1

Re: [PATCH] net: sfc: falcon: convert to i2c_new_dummy_device

[David Miller]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Mon, 22 Jul 2019 19:26:35 +0200

> Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Solarflare folks, please review/test.

Thank you.

Re: [PATCH] net: sfc: falcon: convert to i2c_new_dummy_device

[Edward Cree]

On 24/07/2019 23:47, David Miller wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Date: Mon, 22 Jul 2019 19:26:35 +0200
>
>> Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an
>> ERRPTR which we use in error handling.
>>
>> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Subject & description are incomplete, you're also changing i2c_new_device()
 to i2c_new_client_device().
Other than that,
Acked-by: Edward Cree <ecree@solarflare.com>

> Solarflare folks, please review/test.
>
> Thank you.
Falcon isn't likely to get tested by us, I think we only have about three
 of them left in the building, two of which are in display cabinets ;-)
We end-of-lifed this hardware a couple of years ago, maybe it should be
 downgraded from 'supported' to 'odd fixes'.  Or even moved to staging,
 like that qlogic driver recently was.

Re: [PATCH] net: sfc: falcon: convert to i2c_new_dummy_device

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 566 bytes --]


> >> Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an
> >> ERRPTR which we use in error handling.
> >>
> >> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Subject & description are incomplete, you're also changing i2c_new_device()
>  to i2c_new_client_device().

Right, this was an anomaly with this patch to have both code paths
returning an ERRPTR. The big conversion for i2c_new_device will come
later in a seperate series.

> Other than that,
> Acked-by: Edward Cree <ecree@solarflare.com>

Thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH] net: sfc: falcon: convert to i2c_new_dummy_device

[David Miller]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Mon, 22 Jul 2019 19:26:35 +0200

> Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Applied.