linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/3] arm64: dts: qcom: qcs404: Fix DTS warnings
@ 2019-08-01  9:50 Vinod Koul
  2019-08-01  9:50 ` [PATCH v2 1/3] arm64: dts: qcom: pms405: add unit name adc nodes Vinod Koul
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Vinod Koul @ 2019-08-01  9:50 UTC (permalink / raw)
  To: Andy Gross
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, Rob Herring,
	Mark Rutland, devicetree, linux-kernel, Amit Kucheria

So this is second installment of my work to fix warns on qcom DTS, this time
the traget is qcs404 platform.

Changes since v1:
	- Fix node addresses as pointed by Amit
	- Add review tags of Amit

Vinod Koul (3):
  arm64: dts: qcom: pms405: add unit name adc nodes
  arm64: dts: qcom: pms405: remove reduandant properties
  arm64: dts: qcom: qcs404: remove unit name for thermal trip points

 arch/arm64/boot/dts/qcom/pms405.dtsi | 16 +++++++--------
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 30 ++++++++++++++--------------
 2 files changed, 22 insertions(+), 24 deletions(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 1/3] arm64: dts: qcom: pms405: add unit name adc nodes
  2019-08-01  9:50 [PATCH v2 0/3] arm64: dts: qcom: qcs404: Fix DTS warnings Vinod Koul
@ 2019-08-01  9:50 ` Vinod Koul
  2019-08-01 10:03   ` Amit Kucheria
  2019-08-01  9:50 ` [PATCH v2 2/3] arm64: dts: qcom: pms405: remove reduandant properties Vinod Koul
  2019-08-01  9:50 ` [PATCH v2 3/3] arm64: dts: qcom: qcs404: remove unit name for thermal trip points Vinod Koul
  2 siblings, 1 reply; 5+ messages in thread
From: Vinod Koul @ 2019-08-01  9:50 UTC (permalink / raw)
  To: Andy Gross
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, Rob Herring,
	Mark Rutland, devicetree, linux-kernel, Amit Kucheria

The adc nodes have reg property but were missing the unit name, so add
that to fix these warnings:

arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/pms405.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 14240fedd916..a28386900a3b 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -88,41 +88,41 @@
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			ref_gnd {
+			ref_gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			vref_1p25 {
+			vref_1p25@1 {
 				reg = <ADC5_1P25VREF>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			pon_1: vph_pwr {
+			pon_1: vph_pwr@131 {
 				reg = <ADC5_VPH_PWR>;
 				qcom,pre-scaling = <1 3>;
 			};
 
-			die_temp {
+			die_temp@6 {
 				reg = <ADC5_DIE_TEMP>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			pa_therm1: thermistor1 {
+			pa_therm1: thermistor1@77 {
 				reg = <ADC5_AMUX_THM1_100K_PU>;
 				qcom,ratiometric;
 				qcom,hw-settle-time = <200>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			pa_therm3: thermistor3 {
+			pa_therm3: thermistor3@79 {
 				reg = <ADC5_AMUX_THM3_100K_PU>;
 				qcom,ratiometric;
 				qcom,hw-settle-time = <200>;
 				qcom,pre-scaling = <1 1>;
 			};
 
-			xo_therm: xo_temp {
+			xo_therm: xo_temp@76 {
 				reg = <ADC5_XO_THERM_100K_PU>;
 				qcom,ratiometric;
 				qcom,hw-settle-time = <200>;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 2/3] arm64: dts: qcom: pms405: remove reduandant properties
  2019-08-01  9:50 [PATCH v2 0/3] arm64: dts: qcom: qcs404: Fix DTS warnings Vinod Koul
  2019-08-01  9:50 ` [PATCH v2 1/3] arm64: dts: qcom: pms405: add unit name adc nodes Vinod Koul
@ 2019-08-01  9:50 ` Vinod Koul
  2019-08-01  9:50 ` [PATCH v2 3/3] arm64: dts: qcom: qcs404: remove unit name for thermal trip points Vinod Koul
  2 siblings, 0 replies; 5+ messages in thread
From: Vinod Koul @ 2019-08-01  9:50 UTC (permalink / raw)
  To: Andy Gross
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, Rob Herring,
	Mark Rutland, devicetree, linux-kernel, Amit Kucheria

pms405@1 nodes specified unnecessary #address-cells/#size-cells but the
subnodes dont have "ranges" or "reg" so remove it

arch/arm64/boot/dts/qcom/pms405.dtsi:141.21-150.4: Warning (avoid_unnecessary_addr_size): /soc@0/spmi@200f000/pms405@1: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/pms405.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index a28386900a3b..ff4005186895 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -141,8 +141,6 @@
 	pms405_1: pms405@1 {
 		compatible = "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		pms405_spmi_regulators: regulators {
 			compatible = "qcom,pms405-regulators";
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 3/3] arm64: dts: qcom: qcs404: remove unit name for thermal trip points
  2019-08-01  9:50 [PATCH v2 0/3] arm64: dts: qcom: qcs404: Fix DTS warnings Vinod Koul
  2019-08-01  9:50 ` [PATCH v2 1/3] arm64: dts: qcom: pms405: add unit name adc nodes Vinod Koul
  2019-08-01  9:50 ` [PATCH v2 2/3] arm64: dts: qcom: pms405: remove reduandant properties Vinod Koul
@ 2019-08-01  9:50 ` Vinod Koul
  2 siblings, 0 replies; 5+ messages in thread
From: Vinod Koul @ 2019-08-01  9:50 UTC (permalink / raw)
  To: Andy Gross
  Cc: linux-arm-msm, Bjorn Andersson, Vinod Koul, Rob Herring,
	Mark Rutland, devicetree, linux-kernel, Amit Kucheria

The thermal trip points have unit name but no reg property, so we can
remove them

arch/arm64/boot/dts/qcom/qcs404.dtsi:1080.31-1084.7: Warning (unit_address_vs_reg): /thermal-zones/aoss-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1095.33-1099.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1110.32-1114.7: Warning (unit_address_vs_reg): /thermal-zones/lpass-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1125.31-1129.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1140.34-1144.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1145.34-1149.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1174.31-1178.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1179.31-1183.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1208.31-1212.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1213.31-1217.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1242.31-1246.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1247.31-1251.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1276.31-1280.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1281.31-1285.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1310.30-1314.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal/trips/trip-point@0: node has a unit name, but no reg property

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 30 ++++++++++++++--------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 3d0789775009..6d91dae5aee0 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1077,7 +1077,7 @@
 			thermal-sensors = <&tsens 0>;
 
 			trips {
-				aoss_alert0: trip-point@0 {
+				aoss_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -1092,7 +1092,7 @@
 			thermal-sensors = <&tsens 1>;
 
 			trips {
-				q6_hvx_alert0: trip-point@0 {
+				q6_hvx_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -1107,7 +1107,7 @@
 			thermal-sensors = <&tsens 2>;
 
 			trips {
-				lpass_alert0: trip-point@0 {
+				lpass_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -1122,7 +1122,7 @@
 			thermal-sensors = <&tsens 3>;
 
 			trips {
-				wlan_alert0: trip-point@0 {
+				wlan_alert0: trip-point0 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -1137,12 +1137,12 @@
 			thermal-sensors = <&tsens 4>;
 
 			trips {
-				cluster_alert0: trip-point@0 {
+				cluster_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster_alert1: trip-point@1 {
+				cluster_alert1: trip-point1 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -1171,12 +1171,12 @@
 			thermal-sensors = <&tsens 5>;
 
 			trips {
-				cpu0_alert0: trip-point@0 {
+				cpu0_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cpu0_alert1: trip-point@1 {
+				cpu0_alert1: trip-point1 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -1205,12 +1205,12 @@
 			thermal-sensors = <&tsens 6>;
 
 			trips {
-				cpu1_alert0: trip-point@0 {
+				cpu1_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cpu1_alert1: trip-point@1 {
+				cpu1_alert1: trip-point1 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -1239,12 +1239,12 @@
 			thermal-sensors = <&tsens 7>;
 
 			trips {
-				cpu2_alert0: trip-point@0 {
+				cpu2_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cpu2_alert1: trip-point@1 {
+				cpu2_alert1: trip-point1 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -1273,12 +1273,12 @@
 			thermal-sensors = <&tsens 8>;
 
 			trips {
-				cpu3_alert0: trip-point@0 {
+				cpu3_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cpu3_alert1: trip-point@1 {
+				cpu3_alert1: trip-point1 {
 					temperature = <105000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -1307,7 +1307,7 @@
 			thermal-sensors = <&tsens 9>;
 
 			trips {
-				gpu_alert0: trip-point@0 {
+				gpu_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
-- 
2.20.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 1/3] arm64: dts: qcom: pms405: add unit name adc nodes
  2019-08-01  9:50 ` [PATCH v2 1/3] arm64: dts: qcom: pms405: add unit name adc nodes Vinod Koul
@ 2019-08-01 10:03   ` Amit Kucheria
  0 siblings, 0 replies; 5+ messages in thread
From: Amit Kucheria @ 2019-08-01 10:03 UTC (permalink / raw)
  To: Vinod Koul
  Cc: Andy Gross, linux-arm-msm, Bjorn Andersson, Rob Herring,
	Mark Rutland, DTML, Linux Kernel Mailing List

On Thu, Aug 1, 2019 at 3:22 PM Vinod Koul <vkoul@kernel.org> wrote:
>
> The adc nodes have reg property but were missing the unit name, so add
> that to fix these warnings:
>
> arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>


> ---
>  arch/arm64/boot/dts/qcom/pms405.dtsi | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
> index 14240fedd916..a28386900a3b 100644
> --- a/arch/arm64/boot/dts/qcom/pms405.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
> @@ -88,41 +88,41 @@
>                         #size-cells = <0>;
>                         #io-channel-cells = <1>;
>
> -                       ref_gnd {
> +                       ref_gnd@0 {
>                                 reg = <ADC5_REF_GND>;
>                                 qcom,pre-scaling = <1 1>;
>                         };
>
> -                       vref_1p25 {
> +                       vref_1p25@1 {
>                                 reg = <ADC5_1P25VREF>;
>                                 qcom,pre-scaling = <1 1>;
>                         };
>
> -                       pon_1: vph_pwr {
> +                       pon_1: vph_pwr@131 {
>                                 reg = <ADC5_VPH_PWR>;
>                                 qcom,pre-scaling = <1 3>;
>                         };
>
> -                       die_temp {
> +                       die_temp@6 {
>                                 reg = <ADC5_DIE_TEMP>;
>                                 qcom,pre-scaling = <1 1>;
>                         };
>
> -                       pa_therm1: thermistor1 {
> +                       pa_therm1: thermistor1@77 {
>                                 reg = <ADC5_AMUX_THM1_100K_PU>;
>                                 qcom,ratiometric;
>                                 qcom,hw-settle-time = <200>;
>                                 qcom,pre-scaling = <1 1>;
>                         };
>
> -                       pa_therm3: thermistor3 {
> +                       pa_therm3: thermistor3@79 {
>                                 reg = <ADC5_AMUX_THM3_100K_PU>;
>                                 qcom,ratiometric;
>                                 qcom,hw-settle-time = <200>;
>                                 qcom,pre-scaling = <1 1>;
>                         };
>
> -                       xo_therm: xo_temp {
> +                       xo_therm: xo_temp@76 {
>                                 reg = <ADC5_XO_THERM_100K_PU>;
>                                 qcom,ratiometric;
>                                 qcom,hw-settle-time = <200>;
> --
> 2.20.1
>

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2019-08-01 10:03 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-01  9:50 [PATCH v2 0/3] arm64: dts: qcom: qcs404: Fix DTS warnings Vinod Koul
2019-08-01  9:50 ` [PATCH v2 1/3] arm64: dts: qcom: pms405: add unit name adc nodes Vinod Koul
2019-08-01 10:03   ` Amit Kucheria
2019-08-01  9:50 ` [PATCH v2 2/3] arm64: dts: qcom: pms405: remove reduandant properties Vinod Koul
2019-08-01  9:50 ` [PATCH v2 3/3] arm64: dts: qcom: qcs404: remove unit name for thermal trip points Vinod Koul

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).