[PATCH] phy: marvell: phy-mvebu-cp110-comphy: Implement RXAUI Support

linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH] phy: marvell: phy-mvebu-cp110-comphy: Implement RXAUI Support
@ 2019-08-01 19:50 Matt Pelland
  2019-08-01 19:50 ` [PATCH 1/4] phy: marvell: phy-mvebu-cp110-comphy: implement RXAUI support Matt Pelland
  2019-08-01 19:50 ` [PATCH 2/4] phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT Matt Pelland
  0 siblings, 2 replies; 3+ messages in thread
From: Matt Pelland @ 2019-08-01 19:50 UTC (permalink / raw)
  To: linux-kernel; +Cc: kishon, antoine.tenart, linux-arm-kernel

This patch set introduces support for configuring Marvell's cp110 comphy for
RXAUI operation. I can post the other half of these patches (for mvpp2) here if
need be but I'm preparing to submit them to netdev shortly. I've tested this on
a Marvell Armada 7040 based platform with no issues.

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH 1/4] phy: marvell: phy-mvebu-cp110-comphy: implement RXAUI support
  2019-08-01 19:50 [PATCH] phy: marvell: phy-mvebu-cp110-comphy: Implement RXAUI Support Matt Pelland
@ 2019-08-01 19:50 ` Matt Pelland
  2019-08-01 19:50 ` [PATCH 2/4] phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT Matt Pelland
  1 sibling, 0 replies; 3+ messages in thread
From: Matt Pelland @ 2019-08-01 19:50 UTC (permalink / raw)
  To: linux-kernel; +Cc: kishon, antoine.tenart, linux-arm-kernel, Matt Pelland

Marvell's cp110 phy supports RXAUI on lanes 2, 3, 4, and 5 when
connected to port zero. When used in this mode, lanes operate in pairs
of two (2 and 3, 4 and 5).

Signed-off-by: Matt Pelland <mpelland@starry.com>
---
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 127 ++++++++++++++++++-
 1 file changed, 120 insertions(+), 7 deletions(-)

diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index d98e0451f6a1..f7f8d2bfd641 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -22,6 +22,7 @@
 #define     MVEBU_COMPHY_SERDES_CFG0_PU_RX	BIT(11)
 #define     MVEBU_COMPHY_SERDES_CFG0_PU_TX	BIT(12)
 #define     MVEBU_COMPHY_SERDES_CFG0_HALF_BUS	BIT(14)
+#define     MVEBU_COMPHY_SERDES_CFG0_RXAUI_MODE	BIT(15)
 #define MVEBU_COMPHY_SERDES_CFG1(n)		(0x4 + (n) * 0x1000)
 #define     MVEBU_COMPHY_SERDES_CFG1_RESET	BIT(3)
 #define     MVEBU_COMPHY_SERDES_CFG1_RX_INIT	BIT(4)
@@ -111,6 +112,9 @@
 #define     MVEBU_COMPHY_SELECTOR_PHY(n)	((n) * 0x4)
 #define MVEBU_COMPHY_PIPE_SELECTOR		0x1144
 #define     MVEBU_COMPHY_PIPE_SELECTOR_PIPE(n)	((n) * 0x4)
+#define MVEBU_COMPHY_SD1_CTRL1			0x1148
+#define     MVEBU_COMPHY_SD1_CTRL1_RXAUI1_EN	BIT(26)
+#define     MVEBU_COMPHY_SD1_CTRL1_RXAUI0_EN	BIT(27)
 
 #define MVEBU_COMPHY_LANES	6
 #define MVEBU_COMPHY_PORTS	3
@@ -142,16 +146,20 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	/* lane 2 */
 	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1),
 	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1),
+	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, 0x1),
 	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1),
 	/* lane 3 */
+	MVEBU_COMPHY_CONF(3, 0, PHY_INTERFACE_MODE_RXAUI, 0x1),
 	MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2),
 	MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2),
 	/* lane 4 */
 	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2),
 	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2),
+	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, 0x2),
 	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2),
 	MVEBU_COMPHY_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
 	/* lane 5 */
+	MVEBU_COMPHY_CONF(5, 0, PHY_INTERFACE_MODE_RXAUI, 0x2),
 	MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
 	MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
 };
@@ -193,7 +201,7 @@ static int mvebu_comphy_get_mux(int lane, int port,
 	return mvebu_comphy_cp110_modes[i].mux;
 }
 
-static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
+static int mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
 {
 	struct mvebu_comphy_priv *priv = lane->priv;
 	u32 val;
@@ -210,20 +218,61 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
 		 MVEBU_COMPHY_SERDES_CFG0_PU_TX |
 		 MVEBU_COMPHY_SERDES_CFG0_HALF_BUS |
 		 MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xf) |
-		 MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xf));
-	if (lane->submode == PHY_INTERFACE_MODE_10GKR)
+		 MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xf) |
+		 MVEBU_COMPHY_SERDES_CFG0_RXAUI_MODE);
+
+	switch (lane->submode) {
+	case PHY_INTERFACE_MODE_10GKR:
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xe) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xe);
-	else if (lane->submode == PHY_INTERFACE_MODE_2500BASEX)
+		break;
+	case PHY_INTERFACE_MODE_RXAUI:
+		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xb) |
+		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xb) |
+		       MVEBU_COMPHY_SERDES_CFG0_RXAUI_MODE;
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x8) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x8) |
 		       MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
-	else if (lane->submode == PHY_INTERFACE_MODE_SGMII)
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x6) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x6) |
 		       MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
+		break;
+	default:
+		dev_err(priv->dev,
+			"unsupported comphy submode (%d) on lane %d\n",
+			lane->submode,
+			lane->id);
+		return -ENOTSUPP;
+	}
+
 	writel(val, priv->base + MVEBU_COMPHY_SERDES_CFG0(lane->id));
 
+	if (lane->submode == PHY_INTERFACE_MODE_RXAUI) {
+		regmap_read(priv->regmap, MVEBU_COMPHY_SD1_CTRL1, &val);
+
+		switch (lane->id) {
+		case 2:
+		case 3:
+			val |= MVEBU_COMPHY_SD1_CTRL1_RXAUI0_EN;
+			break;
+		case 4:
+		case 5:
+			val |= MVEBU_COMPHY_SD1_CTRL1_RXAUI1_EN;
+			break;
+		default:
+			dev_err(priv->dev,
+				"RXAUI is not supported on comphy lane %d\n",
+				lane->id);
+			return -EINVAL;
+		}
+
+		regmap_write(priv->regmap, MVEBU_COMPHY_SD1_CTRL1, val);
+	}
+
 	/* reset */
 	val = readl(priv->base + MVEBU_COMPHY_SERDES_CFG1(lane->id));
 	val &= ~(MVEBU_COMPHY_SERDES_CFG1_RESET |
@@ -264,6 +313,8 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
 	val &= ~MVEBU_COMPHY_LOOPBACK_DBUS_WIDTH(0x7);
 	val |= MVEBU_COMPHY_LOOPBACK_DBUS_WIDTH(0x1);
 	writel(val, priv->base + MVEBU_COMPHY_LOOPBACK(lane->id));
+
+	return 0;
 }
 
 static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane)
@@ -312,8 +363,11 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
 	struct mvebu_comphy_priv *priv = lane->priv;
 	u32 val;
+	int err;
 
-	mvebu_comphy_ethernet_init_reset(lane);
+	err = mvebu_comphy_ethernet_init_reset(lane);
+	if (err)
+		return err;
 
 	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 	val &= ~MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
@@ -337,13 +391,69 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
 	return mvebu_comphy_init_plls(lane);
 }
 
+static int mvebu_comphy_set_mode_rxaui(struct phy *phy)
+{
+	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
+	struct mvebu_comphy_priv *priv = lane->priv;
+	u32 val;
+	int err;
+
+	err = mvebu_comphy_ethernet_init_reset(lane);
+	if (err)
+		return err;
+
+	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
+	val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL |
+	       MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
+	writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
+
+	val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+	val |= MVEBU_COMPHY_DLT_CTRL_DLT_FLOOP_EN;
+	writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+
+	val = readl(priv->base + MVEBU_COMPHY_SERDES_CFG2(lane->id));
+	val |= MVEBU_COMPHY_SERDES_CFG2_DFE_EN;
+	writel(val, priv->base + MVEBU_COMPHY_SERDES_CFG2(lane->id));
+
+	val = readl(priv->base + MVEBU_COMPHY_DFE_RES(lane->id));
+	val |= MVEBU_COMPHY_DFE_RES_FORCE_GEN_TBL;
+	writel(val, priv->base + MVEBU_COMPHY_DFE_RES(lane->id));
+
+	val = readl(priv->base + MVEBU_COMPHY_GEN1_S0(lane->id));
+	val &= ~MVEBU_COMPHY_GEN1_S0_TX_EMPH(0xf);
+	val |= MVEBU_COMPHY_GEN1_S0_TX_EMPH(0xd);
+	writel(val, priv->base + MVEBU_COMPHY_GEN1_S0(lane->id));
+
+	val = readl(priv->base + MVEBU_COMPHY_GEN1_S1(lane->id));
+	val &= ~(MVEBU_COMPHY_GEN1_S1_RX_MUL_PI(0x7) |
+		 MVEBU_COMPHY_GEN1_S1_RX_MUL_PF(0x7));
+	val |= MVEBU_COMPHY_GEN1_S1_RX_MUL_PI(0x1) |
+	       MVEBU_COMPHY_GEN1_S1_RX_MUL_PF(0x1) |
+	       MVEBU_COMPHY_GEN1_S1_RX_DFE_EN;
+	writel(val, priv->base + MVEBU_COMPHY_GEN1_S1(lane->id));
+
+	val = readl(priv->base + MVEBU_COMPHY_COEF(lane->id));
+	val &= ~(MVEBU_COMPHY_COEF_DFE_EN | MVEBU_COMPHY_COEF_DFE_CTRL);
+	writel(val, priv->base + MVEBU_COMPHY_COEF(lane->id));
+
+	val = readl(priv->base + MVEBU_COMPHY_GEN1_S4(lane->id));
+	val &= ~MVEBU_COMPHY_GEN1_S4_DFE_RES(0x3);
+	val |= MVEBU_COMPHY_GEN1_S4_DFE_RES(0x1);
+	writel(val, priv->base + MVEBU_COMPHY_GEN1_S4(lane->id));
+
+	return mvebu_comphy_init_plls(lane);
+}
+
 static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
 {
 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
 	struct mvebu_comphy_priv *priv = lane->priv;
 	u32 val;
+	int err;
 
-	mvebu_comphy_ethernet_init_reset(lane);
+	err = mvebu_comphy_ethernet_init_reset(lane);
+	if (err)
+		return err;
 
 	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 	val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL |
@@ -502,6 +612,9 @@ static int mvebu_comphy_power_on(struct phy *phy)
 	case PHY_INTERFACE_MODE_2500BASEX:
 		ret = mvebu_comphy_set_mode_sgmii(phy);
 		break;
+	case PHY_INTERFACE_MODE_RXAUI:
+		ret = mvebu_comphy_set_mode_rxaui(phy);
+		break;
 	case PHY_INTERFACE_MODE_10GKR:
 		ret = mvebu_comphy_set_mode_10gkr(phy);
 		break;
-- 
2.21.0


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH 2/4] phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT
  2019-08-01 19:50 [PATCH] phy: marvell: phy-mvebu-cp110-comphy: Implement RXAUI Support Matt Pelland
  2019-08-01 19:50 ` [PATCH 1/4] phy: marvell: phy-mvebu-cp110-comphy: implement RXAUI support Matt Pelland
@ 2019-08-01 19:50 ` Matt Pelland
  1 sibling, 0 replies; 3+ messages in thread
From: Matt Pelland @ 2019-08-01 19:50 UTC (permalink / raw)
  To: linux-kernel; +Cc: kishon, antoine.tenart, linux-arm-kernel, Matt Pelland

The documentation for Marvell's cp110 phy refers to these
registers/register regions as DTL control, DTL frequency loop enable,
etc. This patch aligns the relevant code for these accordingly.

Signed-off-by: Matt Pelland <mpelland@starry.com>
---
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 22 ++++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index f7f8d2bfd641..f0c02e426da4 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -78,8 +78,8 @@
 #define MVEBU_COMPHY_TX_SLEW_RATE(n)		(0x974 + (n) * 0x1000)
 #define     MVEBU_COMPHY_TX_SLEW_RATE_EMPH(n)	((n) << 5)
 #define     MVEBU_COMPHY_TX_SLEW_RATE_SLC(n)	((n) << 10)
-#define MVEBU_COMPHY_DLT_CTRL(n)		(0x984 + (n) * 0x1000)
-#define     MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN	BIT(2)
+#define MVEBU_COMPHY_DTL_CTRL(n)		(0x984 + (n) * 0x1000)
+#define     MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN	BIT(2)
 #define MVEBU_COMPHY_FRAME_DETECT0(n)		(0xa14 + (n) * 0x1000)
 #define     MVEBU_COMPHY_FRAME_DETECT0_PATN(n)	((n) << 7)
 #define MVEBU_COMPHY_FRAME_DETECT3(n)		(0xa20 + (n) * 0x1000)
@@ -374,9 +374,9 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
 	val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL;
 	writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 
-	val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
-	val &= ~MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
-	writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+	val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+	val &= ~MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+	writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
 
 	regmap_read(priv->regmap, MVEBU_COMPHY_CONF1(lane->id), &val);
 	val &= ~MVEBU_COMPHY_CONF1_USB_PCIE;
@@ -407,9 +407,9 @@ static int mvebu_comphy_set_mode_rxaui(struct phy *phy)
 	       MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
 	writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 
-	val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
-	val |= MVEBU_COMPHY_DLT_CTRL_DLT_FLOOP_EN;
-	writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+	val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+	val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+	writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
 
 	val = readl(priv->base + MVEBU_COMPHY_SERDES_CFG2(lane->id));
 	val |= MVEBU_COMPHY_SERDES_CFG2_DFE_EN;
@@ -460,9 +460,9 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
 	       MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
 	writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 
-	val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
-	val |= MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
-	writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+	val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+	val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+	writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
 
 	/* Speed divider */
 	val = readl(priv->base + MVEBU_COMPHY_SPEED_DIV(lane->id));
-- 
2.21.0


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-08-01 19:51 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-01 19:50 [PATCH] phy: marvell: phy-mvebu-cp110-comphy: Implement RXAUI Support Matt Pelland
2019-08-01 19:50 ` [PATCH 1/4] phy: marvell: phy-mvebu-cp110-comphy: implement RXAUI support Matt Pelland
2019-08-01 19:50 ` [PATCH 2/4] phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT Matt Pelland

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).