* [PATCH] ARM: dts: imx: Cleanup style around assignment operator
@ 2019-07-27 14:26 Krzysztof Kozlowski
2019-07-27 14:30 ` Fabio Estevam
2019-08-03 14:50 ` Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2019-07-27 14:26 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-arm-kernel, linux-kernel
Cc: Krzysztof Kozlowski
Use a space before and after assignment operator to have consistent
style.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/imx6sll.dtsi | 4 ++--
arch/arm/boot/dts/imx6sx.dtsi | 4 ++--
arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi | 2 +-
arch/arm/boot/dts/imx6ul.dtsi | 12 ++++++------
arch/arm/boot/dts/imx7d.dtsi | 4 ++--
arch/arm/boot/dts/imx7s.dtsi | 6 +++---
arch/arm/boot/dts/imx7ulp.dtsi | 8 ++++----
7 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index b0a77ff70b67..0a103a19dc0a 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -234,7 +234,7 @@
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x02018000 0x4000>;
- interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
@@ -801,7 +801,7 @@
compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
"fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
- interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
dma-names = "rx", "tx";
clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index bb25add90f19..b36f31b633d3 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -926,8 +926,8 @@
<&clks IMX6SX_CLK_ENET_PTP>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
index fc2997449b49..a2fec095e2ab 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
@@ -70,7 +70,7 @@
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 =<&pinctrl_i2c1>;
+ pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <100000>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 81d4b4925127..ef6437198db1 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -510,8 +510,8 @@
<&clks IMX6UL_CLK_ENET2_REF_125M>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
+ fsl,num-tx-queues = <1>;
+ fsl,num-rx-queues = <1>;
status = "disabled";
};
@@ -845,8 +845,8 @@
<&clks IMX6UL_CLK_ENET_REF>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
+ fsl,num-tx-queues = <1>;
+ fsl,num-rx-queues = <1>;
status = "disabled";
};
@@ -858,7 +858,7 @@
<&clks IMX6UL_CLK_USDHC1>,
<&clks IMX6UL_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
fsl,tuning-start-tap = <20>;
bus-width = <4>;
status = "disabled";
@@ -873,7 +873,7 @@
<&clks IMX6UL_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
fsl,tuning-start-tap = <20>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 42528d2812a2..9c8dd32cc035 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -147,8 +147,8 @@
<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index c1a4fff5ceda..710f850e785c 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -151,7 +151,7 @@
compatible = "fsl,imx7d-tempmon";
interrupt-parent = <&gpc>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon =<&anatop>;
+ fsl,tempmon = <&anatop>;
nvmem-cells = <&tempmon_calib>,
<&tempmon_temp_grade>;
nvmem-cell-names = "calib", "temp_grade";
@@ -1184,8 +1184,8 @@
<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index 992747a57442..ddab7c42b955 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -201,12 +201,12 @@
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
<&pcc2 IMX7ULP_CLK_USDHC0>;
- clock-names ="ipg", "ahb", "per";
+ clock-names = "ipg", "ahb", "per";
assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>;
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
@@ -217,12 +217,12 @@
clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
<&scg1 IMX7ULP_CLK_NIC1_DIV>,
<&pcc2 IMX7ULP_CLK_USDHC1>;
- clock-names ="ipg", "ahb", "per";
+ clock-names = "ipg", "ahb", "per";
assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>;
bus-width = <4>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx: Cleanup style around assignment operator
2019-07-27 14:26 [PATCH] ARM: dts: imx: Cleanup style around assignment operator Krzysztof Kozlowski
@ 2019-07-27 14:30 ` Fabio Estevam
2019-08-03 14:50 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2019-07-27 14:30 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
linux-kernel
Hi Krzysztof,
On Sat, Jul 27, 2019 at 11:26 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> Use a space before and after assignment operator to have consistent
> style.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Thanks for doing this cleanup:
Reviewed-by: Fabio Estevam <festevam@gmail.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx: Cleanup style around assignment operator
2019-07-27 14:26 [PATCH] ARM: dts: imx: Cleanup style around assignment operator Krzysztof Kozlowski
2019-07-27 14:30 ` Fabio Estevam
@ 2019-08-03 14:50 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2019-08-03 14:50 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-arm-kernel, linux-kernel
On Sat, Jul 27, 2019 at 04:26:40PM +0200, Krzysztof Kozlowski wrote:
> Use a space before and after assignment operator to have consistent
> style.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Applied, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-08-03 14:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-27 14:26 [PATCH] ARM: dts: imx: Cleanup style around assignment operator Krzysztof Kozlowski
2019-07-27 14:30 ` Fabio Estevam
2019-08-03 14:50 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).