* [PATCH v3 0/3] clocksource/drivers/ostm: Miscellaneous improvements @ 2019-08-07 8:46 Geert Uytterhoeven 2019-08-07 8:46 ` [PATCH v3 1/3] clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper Geert Uytterhoeven ` (2 more replies) 0 siblings, 3 replies; 13+ messages in thread From: Geert Uytterhoeven @ 2019-08-07 8:46 UTC (permalink / raw) To: Daniel Lezcano, Thomas Gleixner Cc: Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel, Geert Uytterhoeven Hi all, This patch series contains various improvements for the Renesas OSTM timer driver, as used on the RZ/A1 and RZ/A2 SoCs. The last patch is v3 of a patch that was sent before to a limited audience: - https://lore.kernel.org/linux-renesas-soc/1507727130-17641-1-git-send-email-jacopo+renesas@jmondi.org/ - https://lore.kernel.org/linux-renesas-soc/1507725113-18070-1-git-send-email-geert+renesas@glider.be/ Thanks! Geert Uytterhoeven (3): clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper clocksource/drivers/renesas-ostm: Fix probe error path clocksource/drivers/ostm: Use unique device name instead of ostm drivers/clocksource/renesas-ostm.c | 95 ++++++++++++++++++------------ 1 file changed, 57 insertions(+), 38 deletions(-) -- 2.17.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 1/3] clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper 2019-08-07 8:46 [PATCH v3 0/3] clocksource/drivers/ostm: Miscellaneous improvements Geert Uytterhoeven @ 2019-08-07 8:46 ` Geert Uytterhoeven 2019-08-16 12:58 ` Simon Horman 2019-08-07 8:46 ` [PATCH v3 2/3] clocksource/drivers/renesas-ostm: Fix probe error path Geert Uytterhoeven 2019-08-07 8:46 ` [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm Geert Uytterhoeven 2 siblings, 1 reply; 13+ messages in thread From: Geert Uytterhoeven @ 2019-08-07 8:46 UTC (permalink / raw) To: Daniel Lezcano, Thomas Gleixner Cc: Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel, Geert Uytterhoeven Use the DIV_ROUND_CLOSEST() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v3: - New. --- drivers/clocksource/renesas-ostm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c index 61d5f3b539ce23df..37c39b901bb12b38 100644 --- a/drivers/clocksource/renesas-ostm.c +++ b/drivers/clocksource/renesas-ostm.c @@ -221,7 +221,7 @@ static int __init ostm_init(struct device_node *np) } rate = clk_get_rate(ostm_clk); - ostm->ticks_per_jiffy = (rate + HZ / 2) / HZ; + ostm->ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ); /* * First probed device will be used as system clocksource. Any -- 2.17.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/3] clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper 2019-08-07 8:46 ` [PATCH v3 1/3] clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper Geert Uytterhoeven @ 2019-08-16 12:58 ` Simon Horman 2019-08-16 13:00 ` Daniel Lezcano 0 siblings, 1 reply; 13+ messages in thread From: Simon Horman @ 2019-08-16 12:58 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Daniel Lezcano, Thomas Gleixner, Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel On Wed, Aug 07, 2019 at 10:46:33AM +0200, Geert Uytterhoeven wrote: > Use the DIV_ROUND_CLOSEST() helper instead of open-coding the same > operation. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > --- > v3: > - New. > --- > drivers/clocksource/renesas-ostm.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c > index 61d5f3b539ce23df..37c39b901bb12b38 100644 > --- a/drivers/clocksource/renesas-ostm.c > +++ b/drivers/clocksource/renesas-ostm.c > @@ -221,7 +221,7 @@ static int __init ostm_init(struct device_node *np) > } > > rate = clk_get_rate(ostm_clk); > - ostm->ticks_per_jiffy = (rate + HZ / 2) / HZ; > + ostm->ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ); > > /* > * First probed device will be used as system clocksource. Any > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 1/3] clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper 2019-08-16 12:58 ` Simon Horman @ 2019-08-16 13:00 ` Daniel Lezcano 0 siblings, 0 replies; 13+ messages in thread From: Daniel Lezcano @ 2019-08-16 13:00 UTC (permalink / raw) To: Simon Horman, Geert Uytterhoeven Cc: Thomas Gleixner, Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel On 16/08/2019 14:58, Simon Horman wrote: > On Wed, Aug 07, 2019 at 10:46:33AM +0200, Geert Uytterhoeven wrote: >> Use the DIV_ROUND_CLOSEST() helper instead of open-coding the same >> operation. >> >> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Applied this one, thanks I'm waiting Geert feedbacks for 2/3 and 3/3. -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 2/3] clocksource/drivers/renesas-ostm: Fix probe error path 2019-08-07 8:46 [PATCH v3 0/3] clocksource/drivers/ostm: Miscellaneous improvements Geert Uytterhoeven 2019-08-07 8:46 ` [PATCH v3 1/3] clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper Geert Uytterhoeven @ 2019-08-07 8:46 ` Geert Uytterhoeven 2019-08-07 18:13 ` Daniel Lezcano 2019-08-07 8:46 ` [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm Geert Uytterhoeven 2 siblings, 1 reply; 13+ messages in thread From: Geert Uytterhoeven @ 2019-08-07 8:46 UTC (permalink / raw) To: Daniel Lezcano, Thomas Gleixner Cc: Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel, Geert Uytterhoeven Fix various issues in the error path of ostm_init(): 1. Drop error message printing on of_iomap() failure, as the memory allocation core already takes of that, 2. Handle irq_of_parse_and_map() failures correctly: it returns unsigned int, hence make irq unsigned int, and zero is an error, 3. Propagate/return appropriate error codes instead of -EFAULT. 4. Add a missing clk_put(), 5. Split the single cleanup block in separate phases, to avoid clk_put() calling WARN() when passed an error pointer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v3: - New. --- drivers/clocksource/renesas-ostm.c | 54 ++++++++++++++++-------------- 1 file changed, 29 insertions(+), 25 deletions(-) diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c index 37c39b901bb12b38..1e22e54d7b0df40d 100644 --- a/drivers/clocksource/renesas-ostm.c +++ b/drivers/clocksource/renesas-ostm.c @@ -155,7 +155,7 @@ static irqreturn_t ostm_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init ostm_init_clkevt(struct ostm_device *ostm, int irq, +static int __init ostm_init_clkevt(struct ostm_device *ostm, unsigned int irq, unsigned long rate) { struct clock_event_device *ced = &ostm->ced; @@ -185,11 +185,11 @@ static int __init ostm_init_clkevt(struct ostm_device *ostm, int irq, static int __init ostm_init(struct device_node *np) { - struct ostm_device *ostm; - int ret = -EFAULT; struct clk *ostm_clk = NULL; - int irq; + struct ostm_device *ostm; unsigned long rate; + unsigned int irq; + int ret; ostm = kzalloc(sizeof(*ostm), GFP_KERNEL); if (!ostm) @@ -197,27 +197,29 @@ static int __init ostm_init(struct device_node *np) ostm->base = of_iomap(np, 0); if (!ostm->base) { - pr_err("ostm: failed to remap I/O memory\n"); - goto err; + ret = -ENOMEM; + goto err_free; } irq = irq_of_parse_and_map(np, 0); - if (irq < 0) { + if (!irq) { pr_err("ostm: Failed to get irq\n"); - goto err; + ret = -EINVAL; + goto err_unmap; } ostm_clk = of_clk_get(np, 0); if (IS_ERR(ostm_clk)) { pr_err("ostm: Failed to get clock\n"); ostm_clk = NULL; - goto err; + ret = PTR_ERR(ostm_clk); + goto err_unmap; } ret = clk_prepare_enable(ostm_clk); if (ret) { pr_err("ostm: Failed to enable clock\n"); - goto err; + goto err_clk_put; } rate = clk_get_rate(ostm_clk); @@ -229,28 +231,30 @@ static int __init ostm_init(struct device_node *np) */ if (!system_clock) { ret = ostm_init_clksrc(ostm, rate); + if (ret) + goto err_clk_disable; - if (!ret) { - ostm_init_sched_clock(ostm, rate); - pr_info("ostm: used for clocksource\n"); - } - + ostm_init_sched_clock(ostm, rate); + pr_info("ostm: used for clocksource\n"); } else { ret = ostm_init_clkevt(ostm, irq, rate); + if (ret) + goto err_clk_disable; - if (!ret) - pr_info("ostm: used for clock events\n"); - } - -err: - if (ret) { - clk_disable_unprepare(ostm_clk); - iounmap(ostm->base); - kfree(ostm); - return ret; + pr_info("ostm: used for clock events\n"); } return 0; + +err_clk_disable: + clk_disable_unprepare(ostm_clk); +err_clk_put: + clk_put(ostm_clk); +err_unmap: + iounmap(ostm->base); +err_free: + kfree(ostm); + return ret; } TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init); -- 2.17.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 2/3] clocksource/drivers/renesas-ostm: Fix probe error path 2019-08-07 8:46 ` [PATCH v3 2/3] clocksource/drivers/renesas-ostm: Fix probe error path Geert Uytterhoeven @ 2019-08-07 18:13 ` Daniel Lezcano 2019-08-07 18:56 ` Geert Uytterhoeven 2019-08-16 13:19 ` Simon Horman 0 siblings, 2 replies; 13+ messages in thread From: Daniel Lezcano @ 2019-08-07 18:13 UTC (permalink / raw) To: Geert Uytterhoeven, Thomas Gleixner Cc: Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel On 07/08/2019 10:46, Geert Uytterhoeven wrote: > Fix various issues in the error path of ostm_init(): > 1. Drop error message printing on of_iomap() failure, as the memory > allocation core already takes of that, > 2. Handle irq_of_parse_and_map() failures correctly: it returns > unsigned int, hence make irq unsigned int, and zero is an error, > 3. Propagate/return appropriate error codes instead of -EFAULT. > 4. Add a missing clk_put(), > 5. Split the single cleanup block in separate phases, to avoid > clk_put() calling WARN() when passed an error pointer. Does it make sense to convert to timer-of API? > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > v3: > - New. > --- > drivers/clocksource/renesas-ostm.c | 54 ++++++++++++++++-------------- > 1 file changed, 29 insertions(+), 25 deletions(-) > > diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c > index 37c39b901bb12b38..1e22e54d7b0df40d 100644 > --- a/drivers/clocksource/renesas-ostm.c > +++ b/drivers/clocksource/renesas-ostm.c > @@ -155,7 +155,7 @@ static irqreturn_t ostm_timer_interrupt(int irq, void *dev_id) > return IRQ_HANDLED; > } > > -static int __init ostm_init_clkevt(struct ostm_device *ostm, int irq, > +static int __init ostm_init_clkevt(struct ostm_device *ostm, unsigned int irq, > unsigned long rate) > { > struct clock_event_device *ced = &ostm->ced; > @@ -185,11 +185,11 @@ static int __init ostm_init_clkevt(struct ostm_device *ostm, int irq, > > static int __init ostm_init(struct device_node *np) > { > - struct ostm_device *ostm; > - int ret = -EFAULT; > struct clk *ostm_clk = NULL; > - int irq; > + struct ostm_device *ostm; > unsigned long rate; > + unsigned int irq; > + int ret; > > ostm = kzalloc(sizeof(*ostm), GFP_KERNEL); > if (!ostm) > @@ -197,27 +197,29 @@ static int __init ostm_init(struct device_node *np) > > ostm->base = of_iomap(np, 0); > if (!ostm->base) { > - pr_err("ostm: failed to remap I/O memory\n"); > - goto err; > + ret = -ENOMEM; > + goto err_free; > } > > irq = irq_of_parse_and_map(np, 0); > - if (irq < 0) { > + if (!irq) { > pr_err("ostm: Failed to get irq\n"); > - goto err; > + ret = -EINVAL; > + goto err_unmap; > } > > ostm_clk = of_clk_get(np, 0); > if (IS_ERR(ostm_clk)) { > pr_err("ostm: Failed to get clock\n"); > ostm_clk = NULL; > - goto err; > + ret = PTR_ERR(ostm_clk); > + goto err_unmap; > } > > ret = clk_prepare_enable(ostm_clk); > if (ret) { > pr_err("ostm: Failed to enable clock\n"); > - goto err; > + goto err_clk_put; > } > > rate = clk_get_rate(ostm_clk); > @@ -229,28 +231,30 @@ static int __init ostm_init(struct device_node *np) > */ > if (!system_clock) { > ret = ostm_init_clksrc(ostm, rate); > + if (ret) > + goto err_clk_disable; > > - if (!ret) { > - ostm_init_sched_clock(ostm, rate); > - pr_info("ostm: used for clocksource\n"); > - } > - > + ostm_init_sched_clock(ostm, rate); > + pr_info("ostm: used for clocksource\n"); > } else { > ret = ostm_init_clkevt(ostm, irq, rate); > + if (ret) > + goto err_clk_disable; > > - if (!ret) > - pr_info("ostm: used for clock events\n"); > - } > - > -err: > - if (ret) { > - clk_disable_unprepare(ostm_clk); > - iounmap(ostm->base); > - kfree(ostm); > - return ret; > + pr_info("ostm: used for clock events\n"); > } > > return 0; > + > +err_clk_disable: > + clk_disable_unprepare(ostm_clk); > +err_clk_put: > + clk_put(ostm_clk); > +err_unmap: > + iounmap(ostm->base); > +err_free: > + kfree(ostm); > + return ret; > } > > TIMER_OF_DECLARE(ostm, "renesas,ostm", ostm_init); > -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 2/3] clocksource/drivers/renesas-ostm: Fix probe error path 2019-08-07 18:13 ` Daniel Lezcano @ 2019-08-07 18:56 ` Geert Uytterhoeven 2019-08-16 13:19 ` Simon Horman 1 sibling, 0 replies; 13+ messages in thread From: Geert Uytterhoeven @ 2019-08-07 18:56 UTC (permalink / raw) To: Daniel Lezcano Cc: Geert Uytterhoeven, Thomas Gleixner, Jacopo Mondi, Chris Brandt, Linux-Renesas, Linux Kernel Mailing List Hi Daniel, On Wed, Aug 7, 2019 at 8:13 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > On 07/08/2019 10:46, Geert Uytterhoeven wrote: > > Fix various issues in the error path of ostm_init(): > > 1. Drop error message printing on of_iomap() failure, as the memory > > allocation core already takes of that, > > 2. Handle irq_of_parse_and_map() failures correctly: it returns > > unsigned int, hence make irq unsigned int, and zero is an error, > > 3. Propagate/return appropriate error codes instead of -EFAULT. > > 4. Add a missing clk_put(), > > 5. Split the single cleanup block in separate phases, to avoid > > clk_put() calling WARN() when passed an error pointer. > > Does it make sense to convert to timer-of API? I don't know. Will have a look... Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 2/3] clocksource/drivers/renesas-ostm: Fix probe error path 2019-08-07 18:13 ` Daniel Lezcano 2019-08-07 18:56 ` Geert Uytterhoeven @ 2019-08-16 13:19 ` Simon Horman 1 sibling, 0 replies; 13+ messages in thread From: Simon Horman @ 2019-08-16 13:19 UTC (permalink / raw) To: Daniel Lezcano Cc: Geert Uytterhoeven, Thomas Gleixner, Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel On Wed, Aug 07, 2019 at 08:13:27PM +0200, Daniel Lezcano wrote: > On 07/08/2019 10:46, Geert Uytterhoeven wrote: > > Fix various issues in the error path of ostm_init(): > > 1. Drop error message printing on of_iomap() failure, as the memory > > allocation core already takes of that, > > 2. Handle irq_of_parse_and_map() failures correctly: it returns > > unsigned int, hence make irq unsigned int, and zero is an error, > > 3. Propagate/return appropriate error codes instead of -EFAULT. > > 4. Add a missing clk_put(), > > 5. Split the single cleanup block in separate phases, to avoid > > clk_put() calling WARN() when passed an error pointer. > > Does it make sense to convert to timer-of API? I don't have an opinion on that at this time, but as an improvement this patch looks good to me. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm 2019-08-07 8:46 [PATCH v3 0/3] clocksource/drivers/ostm: Miscellaneous improvements Geert Uytterhoeven 2019-08-07 8:46 ` [PATCH v3 1/3] clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper Geert Uytterhoeven 2019-08-07 8:46 ` [PATCH v3 2/3] clocksource/drivers/renesas-ostm: Fix probe error path Geert Uytterhoeven @ 2019-08-07 8:46 ` Geert Uytterhoeven 2019-08-16 13:11 ` Simon Horman 2 siblings, 1 reply; 13+ messages in thread From: Geert Uytterhoeven @ 2019-08-07 8:46 UTC (permalink / raw) To: Daniel Lezcano, Thomas Gleixner Cc: Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel, Geert Uytterhoeven Currently all OSTM devices are called "ostm", also in kernel messages. As there can be multiple instances in an SoC, this can confuse the user. Hence construct a unique name from the DT node name, like is done for platform devices. On RSK+RZA1, the boot log changes like: -clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns +clocksource: ostm fcfec000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns -ostm: used for clocksource -ostm: used for clock events +ostm fcfec000.timer: used for clocksource +ostm fcfec400.timer: used for clock events Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v3: - Make the name format similar to the one used for platform devices, - Use kasprintf() instead of buffer size guessing, - Use a real example from rskrza1. v2 (by Jacopo): - Use np->full_name. --- drivers/clocksource/renesas-ostm.c | 45 ++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 15 deletions(-) diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c index 1e22e54d7b0df40d..659e3ec7b86714e3 100644 --- a/drivers/clocksource/renesas-ostm.c +++ b/drivers/clocksource/renesas-ostm.c @@ -25,6 +25,7 @@ */ struct ostm_device { + const char *name; void __iomem *base; unsigned long ticks_per_jiffy; struct clock_event_device ced; @@ -79,9 +80,8 @@ static int __init ostm_init_clksrc(struct ostm_device *ostm, unsigned long rate) writeb(CTL_FREERUN, ostm->base + OSTM_CTL); writeb(TS, ostm->base + OSTM_TS); - return clocksource_mmio_init(ostm->base + OSTM_CNT, - "ostm", rate, - 300, 32, clocksource_mmio_readl_up); + return clocksource_mmio_init(ostm->base + OSTM_CNT, ostm->name, rate, + 300, 32, clocksource_mmio_readl_up); } static u64 notrace ostm_read_sched_clock(void) @@ -161,15 +161,14 @@ static int __init ostm_init_clkevt(struct ostm_device *ostm, unsigned int irq, struct clock_event_device *ced = &ostm->ced; int ret = -ENXIO; - ret = request_irq(irq, ostm_timer_interrupt, - IRQF_TIMER | IRQF_IRQPOLL, - "ostm", ostm); + ret = request_irq(irq, ostm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + ostm->name, ostm); if (ret) { - pr_err("ostm: failed to request irq\n"); + pr_err("%s: Failed to request irq\n", ostm->name); return ret; } - ced->name = "ostm"; + ced->name = ostm->name; ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC; ced->set_state_shutdown = ostm_shutdown; ced->set_state_periodic = ostm_set_periodic; @@ -187,6 +186,7 @@ static int __init ostm_init(struct device_node *np) { struct clk *ostm_clk = NULL; struct ostm_device *ostm; + struct resource res; unsigned long rate; unsigned int irq; int ret; @@ -195,22 +195,35 @@ static int __init ostm_init(struct device_node *np) if (!ostm) return -ENOMEM; - ostm->base = of_iomap(np, 0); - if (!ostm->base) { + ret = of_address_to_resource(np, 0, &res); + if (ret) { + pr_err("ostm: Failed to obtain I/O memory\n"); + goto err_free; + } + + ostm->name = kasprintf(GFP_KERNEL, "ostm %llx.%s", + (unsigned long long)res.start, np->name); + if (!ostm->name) { ret = -ENOMEM; goto err_free; } + ostm->base = ioremap(res.start, resource_size(&res)); + if (!ostm->base) { + ret = -ENOMEM; + goto err_free_name; + } + irq = irq_of_parse_and_map(np, 0); if (!irq) { - pr_err("ostm: Failed to get irq\n"); + pr_err("%s: Failed to get irq\n", ostm->name); ret = -EINVAL; goto err_unmap; } ostm_clk = of_clk_get(np, 0); if (IS_ERR(ostm_clk)) { - pr_err("ostm: Failed to get clock\n"); + pr_err("%s: Failed to get clock\n", ostm->name); ostm_clk = NULL; ret = PTR_ERR(ostm_clk); goto err_unmap; @@ -218,7 +231,7 @@ static int __init ostm_init(struct device_node *np) ret = clk_prepare_enable(ostm_clk); if (ret) { - pr_err("ostm: Failed to enable clock\n"); + pr_err("%s: Failed to enable clock\n", ostm->name); goto err_clk_put; } @@ -235,13 +248,13 @@ static int __init ostm_init(struct device_node *np) goto err_clk_disable; ostm_init_sched_clock(ostm, rate); - pr_info("ostm: used for clocksource\n"); + pr_info("%s: used for clocksource\n", ostm->name); } else { ret = ostm_init_clkevt(ostm, irq, rate); if (ret) goto err_clk_disable; - pr_info("ostm: used for clock events\n"); + pr_info("%s: used for clock events\n", ostm->name); } return 0; @@ -252,6 +265,8 @@ static int __init ostm_init(struct device_node *np) clk_put(ostm_clk); err_unmap: iounmap(ostm->base); +err_free_name: + kfree(ostm->name); err_free: kfree(ostm); return ret; -- 2.17.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm 2019-08-07 8:46 ` [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm Geert Uytterhoeven @ 2019-08-16 13:11 ` Simon Horman 2019-08-16 13:12 ` Simon Horman 2019-08-16 13:18 ` Geert Uytterhoeven 0 siblings, 2 replies; 13+ messages in thread From: Simon Horman @ 2019-08-16 13:11 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Daniel Lezcano, Thomas Gleixner, Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel On Wed, Aug 07, 2019 at 10:46:35AM +0200, Geert Uytterhoeven wrote: > Currently all OSTM devices are called "ostm", also in kernel messages. > > As there can be multiple instances in an SoC, this can confuse the user. > Hence construct a unique name from the DT node name, like is done for > platform devices. > > On RSK+RZA1, the boot log changes like: > > -clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns > +clocksource: ostm fcfec000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns > sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns > -ostm: used for clocksource > -ostm: used for clock events > +ostm fcfec000.timer: used for clocksource > +ostm fcfec400.timer: used for clock events > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > v3: > - Make the name format similar to the one used for platform devices, > - Use kasprintf() instead of buffer size guessing, > - Use a real example from rskrza1. > > v2 (by Jacopo): > - Use np->full_name. > --- > drivers/clocksource/renesas-ostm.c | 45 ++++++++++++++++++++---------- > 1 file changed, 30 insertions(+), 15 deletions(-) > > diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c > index 1e22e54d7b0df40d..659e3ec7b86714e3 100644 > --- a/drivers/clocksource/renesas-ostm.c > +++ b/drivers/clocksource/renesas-ostm.c > @@ -25,6 +25,7 @@ > */ > > struct ostm_device { > + const char *name; > void __iomem *base; > unsigned long ticks_per_jiffy; > struct clock_event_device ced; > @@ -79,9 +80,8 @@ static int __init ostm_init_clksrc(struct ostm_device *ostm, unsigned long rate) > writeb(CTL_FREERUN, ostm->base + OSTM_CTL); > writeb(TS, ostm->base + OSTM_TS); > > - return clocksource_mmio_init(ostm->base + OSTM_CNT, > - "ostm", rate, > - 300, 32, clocksource_mmio_readl_up); > + return clocksource_mmio_init(ostm->base + OSTM_CNT, ostm->name, rate, > + 300, 32, clocksource_mmio_readl_up); > } > > static u64 notrace ostm_read_sched_clock(void) > @@ -161,15 +161,14 @@ static int __init ostm_init_clkevt(struct ostm_device *ostm, unsigned int irq, > struct clock_event_device *ced = &ostm->ced; > int ret = -ENXIO; > > - ret = request_irq(irq, ostm_timer_interrupt, > - IRQF_TIMER | IRQF_IRQPOLL, > - "ostm", ostm); > + ret = request_irq(irq, ostm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, > + ostm->name, ostm); > if (ret) { > - pr_err("ostm: failed to request irq\n"); > + pr_err("%s: Failed to request irq\n", ostm->name); > return ret; > } > > - ced->name = "ostm"; > + ced->name = ostm->name; > ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC; > ced->set_state_shutdown = ostm_shutdown; > ced->set_state_periodic = ostm_set_periodic; > @@ -187,6 +186,7 @@ static int __init ostm_init(struct device_node *np) > { > struct clk *ostm_clk = NULL; > struct ostm_device *ostm; > + struct resource res; > unsigned long rate; > unsigned int irq; > int ret; > @@ -195,22 +195,35 @@ static int __init ostm_init(struct device_node *np) > if (!ostm) > return -ENOMEM; > > - ostm->base = of_iomap(np, 0); > - if (!ostm->base) { > + ret = of_address_to_resource(np, 0, &res); > + if (ret) { > + pr_err("ostm: Failed to obtain I/O memory\n"); > + goto err_free; > + } > + > + ostm->name = kasprintf(GFP_KERNEL, "ostm %llx.%s", > + (unsigned long long)res.start, np->name); I'm not sure, but looking at printk-formats.rst it seems that %pa[p] as a format specifier for resource_size_t. If so it may allow dropping the cast above. > + if (!ostm->name) { > ret = -ENOMEM; > goto err_free; > } > > + ostm->base = ioremap(res.start, resource_size(&res)); > + if (!ostm->base) { > + ret = -ENOMEM; > + goto err_free_name; > + } > + > irq = irq_of_parse_and_map(np, 0); > if (!irq) { > - pr_err("ostm: Failed to get irq\n"); > + pr_err("%s: Failed to get irq\n", ostm->name); > ret = -EINVAL; > goto err_unmap; > } > > ostm_clk = of_clk_get(np, 0); > if (IS_ERR(ostm_clk)) { > - pr_err("ostm: Failed to get clock\n"); > + pr_err("%s: Failed to get clock\n", ostm->name); > ostm_clk = NULL; > ret = PTR_ERR(ostm_clk); > goto err_unmap; > @@ -218,7 +231,7 @@ static int __init ostm_init(struct device_node *np) > > ret = clk_prepare_enable(ostm_clk); > if (ret) { > - pr_err("ostm: Failed to enable clock\n"); > + pr_err("%s: Failed to enable clock\n", ostm->name); > goto err_clk_put; > } > > @@ -235,13 +248,13 @@ static int __init ostm_init(struct device_node *np) > goto err_clk_disable; > > ostm_init_sched_clock(ostm, rate); > - pr_info("ostm: used for clocksource\n"); > + pr_info("%s: used for clocksource\n", ostm->name); > } else { > ret = ostm_init_clkevt(ostm, irq, rate); > if (ret) > goto err_clk_disable; > > - pr_info("ostm: used for clock events\n"); > + pr_info("%s: used for clock events\n", ostm->name); > } > > return 0; > @@ -252,6 +265,8 @@ static int __init ostm_init(struct device_node *np) > clk_put(ostm_clk); > err_unmap: > iounmap(ostm->base); > +err_free_name: > + kfree(ostm->name); > err_free: > kfree(ostm); > return ret; > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm 2019-08-16 13:11 ` Simon Horman @ 2019-08-16 13:12 ` Simon Horman 2019-08-16 13:18 ` Geert Uytterhoeven 1 sibling, 0 replies; 13+ messages in thread From: Simon Horman @ 2019-08-16 13:12 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Daniel Lezcano, Thomas Gleixner, Jacopo Mondi, Chris Brandt, linux-renesas-soc, linux-kernel On Fri, Aug 16, 2019 at 03:11:29PM +0200, Simon Horman wrote: > On Wed, Aug 07, 2019 at 10:46:35AM +0200, Geert Uytterhoeven wrote: > > Currently all OSTM devices are called "ostm", also in kernel messages. > > > > As there can be multiple instances in an SoC, this can confuse the user. > > Hence construct a unique name from the DT node name, like is done for > > platform devices. > > > > On RSK+RZA1, the boot log changes like: > > > > -clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns > > +clocksource: ostm fcfec000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns > > sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns > > -ostm: used for clocksource > > -ostm: used for clock events > > +ostm fcfec000.timer: used for clocksource > > +ostm fcfec400.timer: used for clock events > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> The nit in my previous email notwithstanding Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > > --- > > v3: > > - Make the name format similar to the one used for platform devices, > > - Use kasprintf() instead of buffer size guessing, > > - Use a real example from rskrza1. > > > > v2 (by Jacopo): > > - Use np->full_name. > > --- > > drivers/clocksource/renesas-ostm.c | 45 ++++++++++++++++++++---------- > > 1 file changed, 30 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c > > index 1e22e54d7b0df40d..659e3ec7b86714e3 100644 > > --- a/drivers/clocksource/renesas-ostm.c > > +++ b/drivers/clocksource/renesas-ostm.c > > @@ -25,6 +25,7 @@ > > */ > > > > struct ostm_device { > > + const char *name; > > void __iomem *base; > > unsigned long ticks_per_jiffy; > > struct clock_event_device ced; > > @@ -79,9 +80,8 @@ static int __init ostm_init_clksrc(struct ostm_device *ostm, unsigned long rate) > > writeb(CTL_FREERUN, ostm->base + OSTM_CTL); > > writeb(TS, ostm->base + OSTM_TS); > > > > - return clocksource_mmio_init(ostm->base + OSTM_CNT, > > - "ostm", rate, > > - 300, 32, clocksource_mmio_readl_up); > > + return clocksource_mmio_init(ostm->base + OSTM_CNT, ostm->name, rate, > > + 300, 32, clocksource_mmio_readl_up); > > } > > > > static u64 notrace ostm_read_sched_clock(void) > > @@ -161,15 +161,14 @@ static int __init ostm_init_clkevt(struct ostm_device *ostm, unsigned int irq, > > struct clock_event_device *ced = &ostm->ced; > > int ret = -ENXIO; > > > > - ret = request_irq(irq, ostm_timer_interrupt, > > - IRQF_TIMER | IRQF_IRQPOLL, > > - "ostm", ostm); > > + ret = request_irq(irq, ostm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, > > + ostm->name, ostm); > > if (ret) { > > - pr_err("ostm: failed to request irq\n"); > > + pr_err("%s: Failed to request irq\n", ostm->name); > > return ret; > > } > > > > - ced->name = "ostm"; > > + ced->name = ostm->name; > > ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC; > > ced->set_state_shutdown = ostm_shutdown; > > ced->set_state_periodic = ostm_set_periodic; > > @@ -187,6 +186,7 @@ static int __init ostm_init(struct device_node *np) > > { > > struct clk *ostm_clk = NULL; > > struct ostm_device *ostm; > > + struct resource res; > > unsigned long rate; > > unsigned int irq; > > int ret; > > @@ -195,22 +195,35 @@ static int __init ostm_init(struct device_node *np) > > if (!ostm) > > return -ENOMEM; > > > > - ostm->base = of_iomap(np, 0); > > - if (!ostm->base) { > > + ret = of_address_to_resource(np, 0, &res); > > + if (ret) { > > + pr_err("ostm: Failed to obtain I/O memory\n"); > > + goto err_free; > > + } > > + > > + ostm->name = kasprintf(GFP_KERNEL, "ostm %llx.%s", > > + (unsigned long long)res.start, np->name); > > I'm not sure, but looking at printk-formats.rst it seems that > %pa[p] as a format specifier for resource_size_t. If so it may > allow dropping the cast above. > > > + if (!ostm->name) { > > ret = -ENOMEM; > > goto err_free; > > } > > > > + ostm->base = ioremap(res.start, resource_size(&res)); > > + if (!ostm->base) { > > + ret = -ENOMEM; > > + goto err_free_name; > > + } > > + > > irq = irq_of_parse_and_map(np, 0); > > if (!irq) { > > - pr_err("ostm: Failed to get irq\n"); > > + pr_err("%s: Failed to get irq\n", ostm->name); > > ret = -EINVAL; > > goto err_unmap; > > } > > > > ostm_clk = of_clk_get(np, 0); > > if (IS_ERR(ostm_clk)) { > > - pr_err("ostm: Failed to get clock\n"); > > + pr_err("%s: Failed to get clock\n", ostm->name); > > ostm_clk = NULL; > > ret = PTR_ERR(ostm_clk); > > goto err_unmap; > > @@ -218,7 +231,7 @@ static int __init ostm_init(struct device_node *np) > > > > ret = clk_prepare_enable(ostm_clk); > > if (ret) { > > - pr_err("ostm: Failed to enable clock\n"); > > + pr_err("%s: Failed to enable clock\n", ostm->name); > > goto err_clk_put; > > } > > > > @@ -235,13 +248,13 @@ static int __init ostm_init(struct device_node *np) > > goto err_clk_disable; > > > > ostm_init_sched_clock(ostm, rate); > > - pr_info("ostm: used for clocksource\n"); > > + pr_info("%s: used for clocksource\n", ostm->name); > > } else { > > ret = ostm_init_clkevt(ostm, irq, rate); > > if (ret) > > goto err_clk_disable; > > > > - pr_info("ostm: used for clock events\n"); > > + pr_info("%s: used for clock events\n", ostm->name); > > } > > > > return 0; > > @@ -252,6 +265,8 @@ static int __init ostm_init(struct device_node *np) > > clk_put(ostm_clk); > > err_unmap: > > iounmap(ostm->base); > > +err_free_name: > > + kfree(ostm->name); > > err_free: > > kfree(ostm); > > return ret; > > -- > > 2.17.1 > > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm 2019-08-16 13:11 ` Simon Horman 2019-08-16 13:12 ` Simon Horman @ 2019-08-16 13:18 ` Geert Uytterhoeven 2019-08-21 14:12 ` Simon Horman 1 sibling, 1 reply; 13+ messages in thread From: Geert Uytterhoeven @ 2019-08-16 13:18 UTC (permalink / raw) To: Simon Horman Cc: Geert Uytterhoeven, Daniel Lezcano, Thomas Gleixner, Jacopo Mondi, Chris Brandt, Linux-Renesas, Linux Kernel Mailing List Hi Simon, On Fri, Aug 16, 2019 at 3:11 PM Simon Horman <horms@verge.net.au> wrote: > On Wed, Aug 07, 2019 at 10:46:35AM +0200, Geert Uytterhoeven wrote: > > Currently all OSTM devices are called "ostm", also in kernel messages. > > > > As there can be multiple instances in an SoC, this can confuse the user. > > Hence construct a unique name from the DT node name, like is done for > > platform devices. > > > > On RSK+RZA1, the boot log changes like: > > > > -clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns > > +clocksource: ostm fcfec000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns > > sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns > > -ostm: used for clocksource > > -ostm: used for clock events > > +ostm fcfec000.timer: used for clocksource > > +ostm fcfec400.timer: used for clock events > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > --- > > v3: > > - Make the name format similar to the one used for platform devices, > > - Use kasprintf() instead of buffer size guessing, > > - Use a real example from rskrza1. > > > > v2 (by Jacopo): > > - Use np->full_name. > > --- > > drivers/clocksource/renesas-ostm.c | 45 ++++++++++++++++++++---------- > > 1 file changed, 30 insertions(+), 15 deletions(-) > > > > diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c > > index 1e22e54d7b0df40d..659e3ec7b86714e3 100644 > > --- a/drivers/clocksource/renesas-ostm.c > > +++ b/drivers/clocksource/renesas-ostm.c > > @@ -195,22 +195,35 @@ static int __init ostm_init(struct device_node *np) > > if (!ostm) > > return -ENOMEM; > > > > - ostm->base = of_iomap(np, 0); > > - if (!ostm->base) { > > + ret = of_address_to_resource(np, 0, &res); > > + if (ret) { > > + pr_err("ostm: Failed to obtain I/O memory\n"); > > + goto err_free; > > + } > > + > > + ostm->name = kasprintf(GFP_KERNEL, "ostm %llx.%s", > > + (unsigned long long)res.start, np->name); > > I'm not sure, but looking at printk-formats.rst it seems that > %pa[p] as a format specifier for resource_size_t. If so it may > allow dropping the cast above. Using "%pa" adds a "0x" prefix, which we don't want here. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm 2019-08-16 13:18 ` Geert Uytterhoeven @ 2019-08-21 14:12 ` Simon Horman 0 siblings, 0 replies; 13+ messages in thread From: Simon Horman @ 2019-08-21 14:12 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Geert Uytterhoeven, Daniel Lezcano, Thomas Gleixner, Jacopo Mondi, Chris Brandt, Linux-Renesas, Linux Kernel Mailing List On Fri, Aug 16, 2019 at 03:18:06PM +0200, Geert Uytterhoeven wrote: > Hi Simon, > > On Fri, Aug 16, 2019 at 3:11 PM Simon Horman <horms@verge.net.au> wrote: > > On Wed, Aug 07, 2019 at 10:46:35AM +0200, Geert Uytterhoeven wrote: > > > Currently all OSTM devices are called "ostm", also in kernel messages. > > > > > > As there can be multiple instances in an SoC, this can confuse the user. > > > Hence construct a unique name from the DT node name, like is done for > > > platform devices. > > > > > > On RSK+RZA1, the boot log changes like: > > > > > > -clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns > > > +clocksource: ostm fcfec000.timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns > > > sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns > > > -ostm: used for clocksource > > > -ostm: used for clock events > > > +ostm fcfec000.timer: used for clocksource > > > +ostm fcfec400.timer: used for clock events > > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > --- > > > v3: > > > - Make the name format similar to the one used for platform devices, > > > - Use kasprintf() instead of buffer size guessing, > > > - Use a real example from rskrza1. > > > > > > v2 (by Jacopo): > > > - Use np->full_name. > > > --- > > > drivers/clocksource/renesas-ostm.c | 45 ++++++++++++++++++++---------- > > > 1 file changed, 30 insertions(+), 15 deletions(-) > > > > > > diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c > > > index 1e22e54d7b0df40d..659e3ec7b86714e3 100644 > > > --- a/drivers/clocksource/renesas-ostm.c > > > +++ b/drivers/clocksource/renesas-ostm.c > > > > @@ -195,22 +195,35 @@ static int __init ostm_init(struct device_node *np) > > > if (!ostm) > > > return -ENOMEM; > > > > > > - ostm->base = of_iomap(np, 0); > > > - if (!ostm->base) { > > > + ret = of_address_to_resource(np, 0, &res); > > > + if (ret) { > > > + pr_err("ostm: Failed to obtain I/O memory\n"); > > > + goto err_free; > > > + } > > > + > > > + ostm->name = kasprintf(GFP_KERNEL, "ostm %llx.%s", > > > + (unsigned long long)res.start, np->name); > > > > I'm not sure, but looking at printk-formats.rst it seems that > > %pa[p] as a format specifier for resource_size_t. If so it may > > allow dropping the cast above. > > Using "%pa" adds a "0x" prefix, which we don't want here. Thanks, got it. ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2019-08-21 14:12 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-08-07 8:46 [PATCH v3 0/3] clocksource/drivers/ostm: Miscellaneous improvements Geert Uytterhoeven 2019-08-07 8:46 ` [PATCH v3 1/3] clocksource/drivers/renesas-ostm: Use DIV_ROUND_CLOSEST() helper Geert Uytterhoeven 2019-08-16 12:58 ` Simon Horman 2019-08-16 13:00 ` Daniel Lezcano 2019-08-07 8:46 ` [PATCH v3 2/3] clocksource/drivers/renesas-ostm: Fix probe error path Geert Uytterhoeven 2019-08-07 18:13 ` Daniel Lezcano 2019-08-07 18:56 ` Geert Uytterhoeven 2019-08-16 13:19 ` Simon Horman 2019-08-07 8:46 ` [PATCH v3 3/3] clocksource/drivers/ostm: Use unique device name instead of ostm Geert Uytterhoeven 2019-08-16 13:11 ` Simon Horman 2019-08-16 13:12 ` Simon Horman 2019-08-16 13:18 ` Geert Uytterhoeven 2019-08-21 14:12 ` Simon Horman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).