From: Christoph Hellwig <hch@lst.de>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Keith Busch <kbusch@kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Mario Limonciello <Mario.Limonciello@dell.com>,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Keith Busch <keith.busch@intel.com>,
Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>,
linux-nvme <linux-nvme@lists.infradead.org>,
Linux PM <linux-pm@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Rajat Jain <rajatja@google.com>
Subject: Re: [Regression] Commit "nvme/pci: Use host managed power state for suspend" has problems
Date: Wed, 7 Aug 2019 12:45:00 +0200 [thread overview]
Message-ID: <20190807104500.GB11356@lst.de> (raw)
In-Reply-To: <2763495.NmdaWeg79L@kreacher>
On Wed, Aug 07, 2019 at 11:48:33AM +0200, Rafael J. Wysocki wrote:
> So I think I know what the problem is here.
>
> If ASPM is disabled for the NVMe device (which is the case on my machine by default),
> skipping the bus-level PM in nvme_suspend() causes the PCIe link of it to stay up and
> that prevents the SoC from getting into deeper package C-states.
>
> If I change the ASPM policy to "powersave" (through the module parameter in there),
> ASPM gets enabled for the NVMe drive and I can get into PC10 via S2Idle with plain 5.3-rc3.
>
> However, that's a bit less than straightforward, so I'm going to post a patch to make
> nvme_suspend() fall back to the "old ways" if ASPM is not enabled for the target device.
Sounds sensibel.
FYI your mail is not properly formatted and has way too long lines.
next prev parent reply other threads:[~2019-08-07 10:45 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-25 9:51 [Regression] Commit "nvme/pci: Use host managed power state for suspend" has problems Rafael J. Wysocki
2019-07-25 14:02 ` Kai-Heng Feng
2019-07-25 16:23 ` Mario.Limonciello
2019-07-25 17:03 ` Rafael J. Wysocki
2019-07-25 17:23 ` Mario.Limonciello
2019-07-25 18:20 ` Kai-Heng Feng
2019-07-25 19:09 ` Mario.Limonciello
2019-07-30 10:45 ` Rafael J. Wysocki
2019-07-30 14:41 ` Keith Busch
2019-07-30 17:14 ` Mario.Limonciello
2019-07-30 18:50 ` Kai-Heng Feng
2019-07-30 19:19 ` Keith Busch
2019-07-30 21:05 ` Mario.Limonciello
2019-07-30 21:31 ` Keith Busch
2019-07-31 21:25 ` Rafael J. Wysocki
2019-07-31 22:19 ` Keith Busch
2019-07-31 22:33 ` Rafael J. Wysocki
2019-08-01 9:05 ` Kai-Heng Feng
2019-08-01 17:29 ` Rafael J. Wysocki
2019-08-01 19:05 ` Mario.Limonciello
2019-08-01 22:26 ` Rafael J. Wysocki
2019-08-02 10:55 ` Kai-Heng Feng
2019-08-02 11:04 ` Rafael J. Wysocki
2019-08-05 19:13 ` Kai-Heng Feng
2019-08-05 21:28 ` Rafael J. Wysocki
2019-08-06 14:02 ` Mario.Limonciello
2019-08-06 15:00 ` Rafael J. Wysocki
2019-08-07 10:29 ` Rafael J. Wysocki
2019-08-01 20:22 ` Keith Busch
2019-08-07 9:48 ` Rafael J. Wysocki
2019-08-07 10:45 ` Christoph Hellwig [this message]
2019-08-07 10:54 ` Rafael J. Wysocki
2019-08-07 9:53 ` [PATCH] nvme-pci: Do not prevent PCI bus-level PM from being used Rafael J. Wysocki
2019-08-07 10:14 ` Rafael J. Wysocki
2019-08-07 10:43 ` Christoph Hellwig
2019-08-07 14:37 ` Keith Busch
2019-08-08 8:36 ` [PATCH] nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled Rafael J. Wysocki
2019-08-08 8:48 ` Christoph Hellwig
2019-08-08 9:06 ` Rafael J. Wysocki
2019-08-08 10:03 ` [PATCH v2 0/2] " Rafael J. Wysocki
2019-08-08 10:06 ` [PATCH v2 1/2] PCI: PCIe: ASPM: Introduce pcie_aspm_enabled_mask() Rafael J. Wysocki
2019-08-08 13:15 ` Bjorn Helgaas
2019-08-08 14:48 ` Rafael J. Wysocki
2019-08-08 10:10 ` [PATCH v2 2/2] nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled Rafael J. Wysocki
2019-08-08 13:43 ` Bjorn Helgaas
2019-08-08 14:47 ` Rafael J. Wysocki
2019-08-08 17:06 ` Rafael J. Wysocki
2019-08-08 18:39 ` Bjorn Helgaas
2019-08-08 20:01 ` Keith Busch
2019-08-08 20:05 ` Mario.Limonciello
2019-08-08 20:41 ` Rafael J. Wysocki
2019-08-09 4:47 ` Bjorn Helgaas
2019-08-09 8:04 ` Rafael J. Wysocki
2019-08-08 21:51 ` [PATCH v3 0/2] " Rafael J. Wysocki
2019-08-08 21:55 ` [PATCH v3 1/2] PCI: PCIe: ASPM: Introduce pcie_aspm_enabled() Rafael J. Wysocki
2019-08-09 4:50 ` Bjorn Helgaas
2019-08-09 8:00 ` Rafael J. Wysocki
2019-10-07 22:34 ` Bjorn Helgaas
2019-10-08 9:27 ` Rafael J. Wysocki
2019-10-08 21:16 ` Bjorn Helgaas
2019-10-08 22:54 ` Rafael J. Wysocki
2019-10-09 12:49 ` Bjorn Helgaas
2019-08-08 21:58 ` [PATCH v3 2/2] nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled Rafael J. Wysocki
2019-08-08 22:13 ` [PATCH v3 0/2] " Keith Busch
2019-08-09 8:05 ` Rafael J. Wysocki
2019-08-09 14:52 ` Keith Busch
2019-07-25 16:59 ` [Regression] Commit "nvme/pci: Use host managed power state for suspend" has problems Rafael J. Wysocki
2019-07-25 14:52 ` Keith Busch
2019-07-25 19:48 ` Rafael J. Wysocki
2019-07-25 19:52 ` Keith Busch
2019-07-25 20:02 ` Rafael J. Wysocki
2019-07-26 14:02 ` Kai-Heng Feng
2019-07-27 12:55 ` Rafael J. Wysocki
2019-07-29 15:51 ` Mario.Limonciello
2019-07-29 22:05 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190807104500.GB11356@lst.de \
--to=hch@lst.de \
--cc=Mario.Limonciello@dell.com \
--cc=kai.heng.feng@canonical.com \
--cc=kbusch@kernel.org \
--cc=keith.busch@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rajatja@google.com \
--cc=rjw@rjwysocki.net \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).