From: Miquel Raynal <miquel.raynal@bootlin.com>
To: shiva.linuxworks@gmail.com
Cc: Richard Weinberger <richard@nod.at>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
Shivamurthy Shastri <sshivamurthy@micron.com>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
Jeff Kletsky <git-commits@allycomm.com>,
Chuanhong Guo <gch981213@gmail.com>,
liaoweixiong <liaoweixiong@allwinnertech.com>
Subject: Re: [PATCH 2/8] mtd: nand: move support functions for ONFI to nand/onfi.c
Date: Wed, 7 Aug 2019 11:03:32 +0200 [thread overview]
Message-ID: <20190807110332.748d2c14@xps13> (raw)
In-Reply-To: <20190722055621.23526-3-sshivamurthy@micron.com>
Hi shiva.linuxworks@gmail.com,
shiva.linuxworks@gmail.com wrote on Mon, 22 Jul 2019 07:56:15 +0200:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
"mtd: nand: move ONFI specific helpers to nand/onfi.c"?
>
> These functions are support functions for enabling ONFI standard and
> common between raw NAND and SPI NAND.
"
These are ONFI specific helpers that might be shared between raw and
SPI NAND logics, move them to a generic place.
While at it, add kernel doc on the function parameters.
"
>
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> ---
> drivers/mtd/nand/Makefile | 2 +-
> drivers/mtd/nand/onfi.c | 89 ++++++++++++++++++++++++++++++++
> drivers/mtd/nand/raw/nand_base.c | 18 -------
> drivers/mtd/nand/raw/nand_onfi.c | 43 ---------------
> 4 files changed, 90 insertions(+), 62 deletions(-)
> create mode 100644 drivers/mtd/nand/onfi.c
>
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 7ecd80c0a66e..221945c223c3 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -1,6 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
>
> -nandcore-objs := core.o bbt.o
> +nandcore-objs := core.o bbt.o onfi.o
> obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
>
> obj-y += onenand/
> diff --git a/drivers/mtd/nand/onfi.c b/drivers/mtd/nand/onfi.c
> new file mode 100644
> index 000000000000..7aaf36dfc5e0
> --- /dev/null
> +++ b/drivers/mtd/nand/onfi.c
> @@ -0,0 +1,89 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#define pr_fmt(fmt) "nand-onfi: " fmt
> +
> +#include <linux/mtd/onfi.h>
> +#include <linux/mtd/nand.h>
> +
> +/**
> + * onfi_crc16() - Check CRC of ONFI table
There is no check in this function.
Derive the CRC of an ONFI table
> + * @crc: base CRC
> + * @p: buffer pointing to ONFI table
^ the
> + * @len: length of ONFI table
^the
> + *
> + * Return: CRC of the ONFI table
@return: the CRC of the given ONFI table
> + */
> +u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
> +{
> + int i;
> +
> + while (len--) {
> + crc ^= *p++ << 8;
> + for (i = 0; i < 8; i++)
> + crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
> + }
> +
> + return crc;
> +}
> +EXPORT_SYMBOL_GPL(onfi_crc16);
> +
> +/**
> + * nand_bit_wise_majority() - Recover data with bit-wise majority
> + * @srcbufs: buffer pointing to ONFI table
> + * @nsrcbufs: length of ONFI table
^the
> + * @dstbuf: valid ONFI table to be returned
> + * @bufsize: length og valid ONFI table
of the valid...
> + *
Extra line
> + */
> +void nand_bit_wise_majority(const void **srcbufs,
> + unsigned int nsrcbufs,
> + void *dstbuf,
> + unsigned int bufsize)
> +{
> + int i, j, k;
> +
> + for (i = 0; i < bufsize; i++) {
> + u8 val = 0;
> +
> + for (j = 0; j < 8; j++) {
> + unsigned int cnt = 0;
> +
> + for (k = 0; k < nsrcbufs; k++) {
> + const u8 *srcbuf = srcbufs[k];
> +
> + if (srcbuf[i] & BIT(j))
> + cnt++;
> + }
> +
> + if (cnt > nsrcbufs / 2)
> + val |= BIT(j);
> + }
> +
> + ((u8 *)dstbuf)[i] = val;
> + }
> +}
> +EXPORT_SYMBOL_GPL(nand_bit_wise_majority);
> +
> +/**
> + * sanitize_string() - Sanitize ONFI strings so we can safely print them
It is used by JEDEC logic so this should be moved elsewhere and not
refer to any ONFI naming.
> + * @s: string to be sanitized
> + * @len: length of the string
> + *
> + */
> +void sanitize_string(u8 *s, size_t len)
> +{
> + ssize_t i;
> +
> + /* Null terminate */
> + s[len - 1] = 0;
> +
> + /* Remove non printable chars */
> + for (i = 0; i < len - 1; i++) {
> + if (s[i] < ' ' || s[i] > 127)
> + s[i] = '?';
> + }
> +
> + /* Remove trailing spaces */
> + strim(s);
> +}
> +EXPORT_SYMBOL_GPL(sanitize_string);
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index 6ecd1c496ce3..c198829bcd79 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -4375,24 +4375,6 @@ static void nand_set_defaults(struct nand_chip *chip)
> chip->buf_align = 1;
> }
>
> -/* Sanitize ONFI strings so we can safely print them */
> -void sanitize_string(uint8_t *s, size_t len)
> -{
> - ssize_t i;
> -
> - /* Null terminate */
> - s[len - 1] = 0;
> -
> - /* Remove non printable chars */
> - for (i = 0; i < len - 1; i++) {
> - if (s[i] < ' ' || s[i] > 127)
> - s[i] = '?';
> - }
> -
> - /* Remove trailing spaces */
> - strim(s);
> -}
> -
> /*
> * nand_id_has_period - Check if an ID string has a given wraparound period
> * @id_data: the ID string
> diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
> index 0b879bd0a68c..2e8edfa636ef 100644
> --- a/drivers/mtd/nand/raw/nand_onfi.c
> +++ b/drivers/mtd/nand/raw/nand_onfi.c
> @@ -16,18 +16,6 @@
>
> #include "internals.h"
>
> -u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
> -{
> - int i;
> - while (len--) {
> - crc ^= *p++ << 8;
> - for (i = 0; i < 8; i++)
> - crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
> - }
> -
> - return crc;
> -}
> -
> /* Parse the Extended Parameter Page. */
> static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
> struct nand_onfi_params *p)
> @@ -103,37 +91,6 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
> return ret;
> }
>
> -/*
> - * Recover data with bit-wise majority
> - */
> -static void nand_bit_wise_majority(const void **srcbufs,
> - unsigned int nsrcbufs,
> - void *dstbuf,
> - unsigned int bufsize)
> -{
> - int i, j, k;
> -
> - for (i = 0; i < bufsize; i++) {
> - u8 val = 0;
> -
> - for (j = 0; j < 8; j++) {
> - unsigned int cnt = 0;
> -
> - for (k = 0; k < nsrcbufs; k++) {
> - const u8 *srcbuf = srcbufs[k];
> -
> - if (srcbuf[i] & BIT(j))
> - cnt++;
> - }
> -
> - if (cnt > nsrcbufs / 2)
> - val |= BIT(j);
> - }
> -
> - ((u8 *)dstbuf)[i] = val;
> - }
> -}
> -
> /*
> * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
> */
Thanks,
Miquèl
next prev parent reply other threads:[~2019-08-07 9:03 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 5:56 [PATCH 0/8] Introduce generic ONFI support shiva.linuxworks
2019-07-22 5:56 ` [PATCH 1/8] mtd: nand: move ONFI related functions to onfi.h shiva.linuxworks
2019-08-07 8:34 ` Miquel Raynal
2019-08-19 8:35 ` [EXT] " Shivamurthy Shastri (sshivamurthy)
2019-07-22 5:56 ` [PATCH 2/8] mtd: nand: move support functions for ONFI to nand/onfi.c shiva.linuxworks
2019-08-07 9:03 ` Miquel Raynal [this message]
2019-08-19 8:36 ` [EXT] " Shivamurthy Shastri (sshivamurthy)
2019-07-22 5:56 ` [PATCH 3/8] mtd: nand: create ONFI table parsing instance shiva.linuxworks
2019-08-07 9:09 ` Miquel Raynal
2019-07-22 5:56 ` [PATCH 4/8] mtd: spinand: enabled parameter page support shiva.linuxworks
2019-08-07 9:48 ` Miquel Raynal
2019-08-19 8:51 ` [EXT] " Shivamurthy Shastri (sshivamurthy)
2019-08-19 9:21 ` Miquel Raynal
2019-09-30 13:23 ` Shivamurthy Shastri (sshivamurthy)
2019-10-07 7:52 ` Boris Brezillon
2019-07-22 5:56 ` [PATCH 5/8] mtd: spinand: micron: prepare for generalizing driver shiva.linuxworks
2019-08-07 9:51 ` Miquel Raynal
2019-07-22 5:56 ` [PATCH 6/8] mtd: spinand: micron: Turn driver implementation generic shiva.linuxworks
2019-08-07 10:04 ` Miquel Raynal
2019-08-19 9:03 ` [EXT] " Shivamurthy Shastri (sshivamurthy)
2019-08-19 9:19 ` Miquel Raynal
2019-09-16 10:41 ` Shivamurthy Shastri (sshivamurthy)
2019-10-07 8:13 ` Boris Brezillon
2019-10-14 12:49 ` Shivamurthy Shastri (sshivamurthy)
2019-07-22 5:56 ` [PATCH 7/8] mtd: spinand: micron: Fix read failure in Micron M70A flashes shiva.linuxworks
2019-08-07 10:05 ` Miquel Raynal
2019-07-22 5:56 ` [PATCH 8/8] mtd: spinand: micron: Enable micron flashes with multi-die shiva.linuxworks
2019-08-07 10:08 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190807110332.748d2c14@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=frieder.schrempf@kontron.de \
--cc=gch981213@gmail.com \
--cc=git-commits@allycomm.com \
--cc=liaoweixiong@allwinnertech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marcel.ziswiler@toradex.com \
--cc=marek.vasut@gmail.com \
--cc=richard@nod.at \
--cc=shiva.linuxworks@gmail.com \
--cc=sshivamurthy@micron.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).