* [Linux 5.2.7] powertop --auto-tune: BUG: kernel NULL pointer dereference, address: 0000000000000000
@ 2019-08-10 16:33 Paul Menzel
2019-08-10 17:31 ` Thomas Gleixner
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2019-08-10 16:33 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: x86, LKML
[-- Attachment #1: Type: text/plain, Size: 10953 bytes --]
Dear Linux,
I have no idea, who to report this to, so I please refer me to the
correct list.
With Linux 5.2.7 from Debian Sid/unstable and PowerTOP 2.10, executing
sudo powertop --auto-tune
causes a NULL pointer dereference, and the graphical session crashes due
to an effect on the i915 driver. It worked in the past with the 4.19
series from Debian.
Here is the trace, and please find all Linux kernel logs attached.
> [ 2027.127428] calling msr_init+0x0/0x1000 [msr] @ 6294
> [ 2027.131123] initcall msr_init+0x0/0x1000 [msr] returned 0 after 3599 usecs
> [ 2027.170589] BUG: kernel NULL pointer dereference, address: 0000000000000000
> [ 2027.170600] #PF: supervisor instruction fetch in kernel mode
> [ 2027.170604] #PF: error_code(0x0010) - not-present page
> [ 2027.170609] PGD 0 P4D 0
> [ 2027.170619] Oops: 0010 [#1] SMP PTI
> [ 2027.170628] CPU: 0 PID: 6290 Comm: powertop Not tainted 5.2.0-2-amd64 #1 Debian 5.2.7-1
> [ 2027.170632] Hardware name: Dell Inc. Latitude E7250/0TVD2T, BIOS A19 01/23/2018
> [ 2027.170640] RIP: 0010:0x0
> [ 2027.170653] Code: Bad RIP value.
> [ 2027.170660] RSP: 0018:ffffb1a943543cd8 EFLAGS: 00010246
> [ 2027.170666] RAX: 0000000000000000 RBX: ffff95c66adc1b00 RCX: 0000000000000001
> [ 2027.170672] RDX: ffff95c68ad50600 RSI: ffff95c66adc1b00 RDI: ffff95c68d320de0
> [ 2027.170678] RBP: ffff95c68d320de0 R08: 0000000000000000 R09: 0000000000000000
> [ 2027.170683] R10: ffff95c68d2d6f00 R11: 0000000000000000 R12: ffff95c66adc1b10
> [ 2027.170689] R13: ffffffff8851cdd0 R14: 0000000000000000 R15: ffff95c66adc1b00
> [ 2027.170698] FS: 00007f2933119740(0000) GS:ffff95c68da00000(0000) knlGS:0000000000000000
> [ 2027.170703] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 2027.170710] CR2: ffffffffffffffd6 CR3: 00000003d7b44006 CR4: 00000000003606f0
> [ 2027.170714] Call Trace:
> [ 2027.170730] do_dentry_open+0x13a/0x370
> [ 2027.170745] path_openat+0x2c6/0x1480
> [ 2027.170757] ? terminate_walk+0xe6/0x100
> [ 2027.170767] ? path_lookupat.isra.48+0xa3/0x220
> [ 2027.170779] ? reuse_swap_page+0x105/0x320
> [ 2027.170791] do_filp_open+0x93/0x100
> [ 2027.170804] ? __check_object_size+0x15d/0x189
> [ 2027.170816] do_sys_open+0x184/0x220
> [ 2027.170828] do_syscall_64+0x53/0x130
> [ 2027.170837] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> [ 2027.170844] RIP: 0033:0x7f29332771ae
> [ 2027.170850] Code: 25 00 00 41 00 3d 00 00 41 00 74 48 48 8d 05 59 65 0d 00 8b 00 85 c0 75 69 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a6 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
> [ 2027.170856] RSP: 002b:00007fffda995f10 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
> [ 2027.170863] RAX: ffffffffffffffda RBX: 00005608e822f870 RCX: 00007f29332771ae
> [ 2027.170868] RDX: 0000000000000000 RSI: 00007fffda9972b0 RDI: 00000000ffffff9c
> [ 2027.170872] RBP: 0000000000000008 R08: 0000000000000008 R09: 0000000000000001
> [ 2027.170878] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293368d805
> [ 2027.170883] R13: 00007f293368d805 R14: 0000000000000001 R15: 00005608e7d9afd0
> [ 2027.170891] Modules linked in: msr snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media btusb btrtl btbcm btintel bluetooth ecdh_generic ecc binfmt_misc nls_ascii nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel arc4 mei_wdt iTCO_wdt kvm iTCO_vendor_support watchdog wmi_bmof dell_wmi sparse_keymap irqbypass ppdev iwlmvm dell_laptop crct10dif_pclmul dell_smbios crc32_pclmul dell_wmi_descriptor dcdbas snd_hda_codec_realtek snd_hda_codec_generic dell_smm_hwmon mac80211 ghash_clmulni_intel ledtrig_audio i915 intel_cstate snd_hda_intel intel_uncore intel_rapl_perf drm_kms_helper snd_hda_codec xhci_pci iwlwifi ehci_pci sdhci_pci xhci_hcd ehci_hcd snd_hda_core cqhci efi_pstore sdhci pcspkr snd_hwdep mei_me joydev e1000e mmc_core sg mei snd_pcm usbcore processor_thermal_device tpm_tis cfg80211 efivars drm tpm_tis_core intel_soc_dts_iosf snd_timer i2c_i801 snd lpc_ich soundcore mfd_core usb_common
> [ 2027.171003] i2c_algo_bit tpm rng_core battery wmi parport_pc parport int3403_thermal pcc_cpufreq video ac int3402_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel dell_rbtn rfkill button acpi_pad efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic algif_skcipher af_alg dm_crypt dm_mod sd_mod crc32c_intel ahci libahci aesni_intel libata aes_x86_64 glue_helper crypto_simd scsi_mod psmouse cryptd evdev serio_raw fan
> [ 2027.171071] CR2: 0000000000000000
> [ 2027.171079] ---[ end trace fba28f1c98c90aac ]---
> [ 2028.530750] i915 0000:00:02.0: Failed to idle engines, declaring wedged!
> [ 2029.198236] RIP: 0010:0x0
> [ 2029.198246] Code: Bad RIP value.
> [ 2029.198249] RSP: 0018:ffffb1a943543cd8 EFLAGS: 00010246
> [ 2029.198253] RAX: 0000000000000000 RBX: ffff95c66adc1b00 RCX: 0000000000000001
> [ 2029.198255] RDX: ffff95c68ad50600 RSI: ffff95c66adc1b00 RDI: ffff95c68d320de0
> [ 2029.198257] RBP: ffff95c68d320de0 R08: 0000000000000000 R09: 0000000000000000
> [ 2029.198259] R10: ffff95c68d2d6f00 R11: 0000000000000000 R12: ffff95c66adc1b10
> [ 2029.198261] R13: ffffffff8851cdd0 R14: 0000000000000000 R15: ffff95c66adc1b00
> [ 2029.198264] FS: 00007f2933119740(0000) GS:ffff95c68da00000(0000) knlGS:0000000000000000
> [ 2029.198266] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 2029.198268] CR2: ffffffffffffffd6 CR3: 00000003d7b44006 CR4: 00000000003606f0
> [ 2029.255445] rfkill: input handler enabled
> [ 2037.093000] rfkill: input handler disabled
> [ 2042.552216] BUG: kernel NULL pointer dereference, address: 0000000000000000
> [ 2042.552219] #PF: supervisor instruction fetch in kernel mode
> [ 2042.552220] #PF: error_code(0x0010) - not-present page
> [ 2042.552221] PGD 0 P4D 0
> [ 2042.552223] Oops: 0010 [#2] SMP PTI
> [ 2042.552225] CPU: 2 PID: 6883 Comm: powertop Tainted: G D 5.2.0-2-amd64 #1 Debian 5.2.7-1
> [ 2042.552226] Hardware name: Dell Inc. Latitude E7250/0TVD2T, BIOS A19 01/23/2018
> [ 2042.552228] RIP: 0010:0x0
> [ 2042.552230] Code: Bad RIP value.
> [ 2042.552231] RSP: 0018:ffffb1a94815fcd8 EFLAGS: 00010246
> [ 2042.552232] RAX: 0000000000000000 RBX: ffff95c62e77fb00 RCX: 0000000000000001
> [ 2042.552233] RDX: ffff95c68ad50600 RSI: ffff95c62e77fb00 RDI: ffff95c68d320de0
> [ 2042.552234] RBP: ffff95c68d320de0 R08: 0000000000000000 R09: 0000000000000000
> [ 2042.552235] R10: ffff95c68d2d6f00 R11: 0000000000000000 R12: ffff95c62e77fb10
> [ 2042.552235] R13: ffffffff8851cdd0 R14: 0000000000000000 R15: ffff95c62e77fb00
> [ 2042.552236] FS: 00007f438ebb2740(0000) GS:ffff95c68db00000(0000) knlGS:0000000000000000
> [ 2042.552237] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 2042.552238] CR2: ffffffffffffffd6 CR3: 00000003e4dfc002 CR4: 00000000003606e0
> [ 2042.552239] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 2042.552240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 2042.552240] Call Trace:
> [ 2042.552244] do_dentry_open+0x13a/0x370
> [ 2042.552248] path_openat+0x2c6/0x1480
> [ 2042.552250] ? terminate_walk+0xe6/0x100
> [ 2042.552251] ? path_lookupat.isra.48+0xa3/0x220
> [ 2042.552253] ? reuse_swap_page+0x105/0x320
> [ 2042.552255] do_filp_open+0x93/0x100
> [ 2042.552257] ? __check_object_size+0x15d/0x189
> [ 2042.552260] do_sys_open+0x184/0x220
> [ 2042.552262] do_syscall_64+0x53/0x130
> [ 2042.552265] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> [ 2042.552266] RIP: 0033:0x7f438ed101ae
> [ 2042.552268] Code: 25 00 00 41 00 3d 00 00 41 00 74 48 48 8d 05 59 65 0d 00 8b 00 85 c0 75 69 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a6 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
> [ 2042.552269] RSP: 002b:00007ffd324ae9d0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
> [ 2042.552270] RAX: ffffffffffffffda RBX: 0000557124829870 RCX: 00007f438ed101ae
> [ 2042.552271] RDX: 0000000000000000 RSI: 00007ffd324afd70 RDI: 00000000ffffff9c
> [ 2042.552271] RBP: 0000000000000008 R08: 0000000000000008 R09: 0000000000000001
> [ 2042.552272] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f438f126805
> [ 2042.552273] R13: 00007f438f126805 R14: 0000000000000001 R15: 0000557124293fd0
> [ 2042.552274] Modules linked in: msr snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media btusb btrtl btbcm btintel bluetooth ecdh_generic ecc binfmt_misc nls_ascii nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel arc4 mei_wdt iTCO_wdt kvm iTCO_vendor_support watchdog wmi_bmof dell_wmi sparse_keymap irqbypass ppdev iwlmvm dell_laptop crct10dif_pclmul dell_smbios crc32_pclmul dell_wmi_descriptor dcdbas snd_hda_codec_realtek snd_hda_codec_generic dell_smm_hwmon mac80211 ghash_clmulni_intel ledtrig_audio i915 intel_cstate snd_hda_intel intel_uncore intel_rapl_perf drm_kms_helper snd_hda_codec xhci_pci iwlwifi ehci_pci sdhci_pci xhci_hcd ehci_hcd snd_hda_core cqhci efi_pstore sdhci pcspkr snd_hwdep mei_me joydev e1000e mmc_core sg mei snd_pcm usbcore processor_thermal_device tpm_tis cfg80211 efivars drm tpm_tis_core intel_soc_dts_iosf snd_timer i2c_i801 snd lpc_ich soundcore mfd_core usb_common
> [ 2042.552299] i2c_algo_bit tpm rng_core battery wmi parport_pc parport int3403_thermal pcc_cpufreq video ac int3402_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel dell_rbtn rfkill button acpi_pad efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic algif_skcipher af_alg dm_crypt dm_mod sd_mod crc32c_intel ahci libahci aesni_intel libata aes_x86_64 glue_helper crypto_simd scsi_mod psmouse cryptd evdev serio_raw fan
> [ 2042.552313] CR2: 0000000000000000
> [ 2042.552315] ---[ end trace fba28f1c98c90aad ]---
> [ 2044.057566] RIP: 0010:0x0
> [ 2044.057578] Code: Bad RIP value.
> [ 2044.057580] RSP: 0018:ffffb1a943543cd8 EFLAGS: 00010246
> [ 2044.057583] RAX: 0000000000000000 RBX: ffff95c66adc1b00 RCX: 0000000000000001
> [ 2044.057584] RDX: ffff95c68ad50600 RSI: ffff95c66adc1b00 RDI: ffff95c68d320de0
> [ 2044.057586] RBP: ffff95c68d320de0 R08: 0000000000000000 R09: 0000000000000000
> [ 2044.057588] R10: ffff95c68d2d6f00 R11: 0000000000000000 R12: ffff95c66adc1b10
> [ 2044.057590] R13: ffffffff8851cdd0 R14: 0000000000000000 R15: ffff95c66adc1b00
> [ 2044.057592] FS: 00007f438ebb2740(0000) GS:ffff95c68db00000(0000) knlGS:0000000000000000
> [ 2044.057594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 2044.057595] CR2: ffffffffffffffd6 CR3: 00000003e4dfc002 CR4: 00000000003606e0
> [ 2044.057597] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 2044.057598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 000000000000040
Kind regards,
Paul
[-- Attachment #2: 20190810–linux-5.2.7–messages.txt --]
[-- Type: text/plain, Size: 240877 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2019-03-07
[ 0.000000] Linux version 5.2.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-19)) #1 SMP Debian 5.2.7-1 (2019-08-07)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.2.0-2-amd64 root=UUID=aa6034bb-8cc1-4111-a0a7-9b3f5e13e281 ro quiet noisapnp initcall_debug log_buf_len=8M random.trust_cpu=on cryptomgr.notests i915.fastboot=0 systemd.verity=0 kmemleak=on
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf4b7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf4b8000-0x00000000bf938fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf939000-0x00000000d9d9afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9d9b000-0x00000000d9ed6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9ed7000-0x00000000d9f07fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d9f08000-0x00000000da96bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da96c000-0x00000000daddcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daddd000-0x00000000dba5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dba5f000-0x00000000dbafefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000dbaff000-0x00000000dbafffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xd9ee4000 ACPI 2.0=0xd9ee4000 SMBIOS=0xf0000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Latitude E7250/0TVD2T, BIOS A19 01/23/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.732 MHz processor
[ 0.000057] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000058] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000063] last_pfn = 0x41e800 max_arch_pfn = 0x400000000
[ 0.000067] MTRR default type: uncachable
[ 0.000067] MTRR fixed ranges enabled:
[ 0.000068] 00000-9FFFF write-back
[ 0.000069] A0000-DFFFF uncachable
[ 0.000069] E0000-FFFFF write-protect
[ 0.000070] MTRR variable ranges enabled:
[ 0.000071] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000072] 1 base 0400000000 mask 7FF0000000 write-back
[ 0.000072] 2 base 0410000000 mask 7FF8000000 write-back
[ 0.000073] 3 base 0418000000 mask 7FFC000000 write-back
[ 0.000073] 4 base 041C000000 mask 7FFE000000 write-back
[ 0.000074] 5 base 041E000000 mask 7FFF800000 write-back
[ 0.000074] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000075] 7 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000075] 8 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000076] 9 disabled
[ 0.000844] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000949] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000952] last_pfn = 0xdbb00 max_arch_pfn = 0x400000000
[ 0.007505] Using GB pages for direct mapping
[ 0.007506] BRK [0x1bf801000, 0x1bf801fff] PGTABLE
[ 0.007508] BRK [0x1bf802000, 0x1bf802fff] PGTABLE
[ 0.007508] BRK [0x1bf803000, 0x1bf803fff] PGTABLE
[ 0.007534] BRK [0x1bf804000, 0x1bf804fff] PGTABLE
[ 0.007535] BRK [0x1bf805000, 0x1bf805fff] PGTABLE
[ 0.007663] BRK [0x1bf806000, 0x1bf806fff] PGTABLE
[ 0.007685] BRK [0x1bf807000, 0x1bf807fff] PGTABLE
[ 0.007719] BRK [0x1bf808000, 0x1bf808fff] PGTABLE
[ 0.007734] BRK [0x1bf809000, 0x1bf809fff] PGTABLE
[ 0.007767] BRK [0x1bf80a000, 0x1bf80afff] PGTABLE
[ 0.007805] BRK [0x1bf80b000, 0x1bf80bfff] PGTABLE
[ 0.007865] BRK [0x1bf80c000, 0x1bf80cfff] PGTABLE
[ 0.008409] printk: log_buf_len: 8388608 bytes
[ 0.008409] printk: early log buf free: 125876(96%)
[ 0.008410] RAMDISK: [mem 0x36d9d000-0x376c5fff]
[ 0.008417] ACPI: Early table checksum verification disabled
[ 0.008419] ACPI: RSDP 0x00000000D9EE4000 000024 (v02 DELL )
[ 0.008422] ACPI: XSDT 0x00000000D9EE40B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.008426] ACPI: FACP 0x00000000D9EF8A28 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.008430] ACPI: DSDT 0x00000000D9EE4230 0147F6 (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.008432] ACPI: FACS 0x00000000DADDBF80 000040
[ 0.008434] ACPI: UEFI 0x00000000D9EF9000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
[ 0.008436] ACPI: APIC 0x00000000D9EF9640 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.008438] ACPI: FPDT 0x00000000D9EF96C8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.008439] ACPI: FIDT 0x00000000D9EF9710 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.008441] ACPI: MCFG 0x00000000D9EF97B0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.008443] ACPI: HPET 0x00000000D9EF97F0 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.008445] ACPI: SSDT 0x00000000D9EF9828 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.008446] ACPI: UEFI 0x00000000D9EF9CE0 000042 (v01 00000000 00000000)
[ 0.008448] ACPI: SSDT 0x00000000D9EF9D28 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.008450] ACPI: ASF! 0x00000000D9EFA9A8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.008452] ACPI: SSDT 0x00000000D9EFAA48 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.008454] ACPI: SSDT 0x00000000D9EFAF68 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.008456] ACPI: SSDT 0x00000000D9EFBAE0 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
[ 0.008458] ACPI: SSDT 0x00000000D9EFBCA8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.008460] ACPI: PCCT 0x00000000D9EFC050 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.008462] ACPI: SSDT 0x00000000D9EFC0C0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.008463] ACPI: SSDT 0x00000000D9EFCB88 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.008465] ACPI: SSDT 0x00000000D9F00D38 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.008467] ACPI: TCPA 0x00000000D9F05240 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013)
[ 0.008469] ACPI: SSDT 0x00000000D9F05278 000597 (v01 AMITCG _SynTCG_ 00000001 INTL 20120913)
[ 0.008471] ACPI: DMAR 0x00000000D9F05810 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.008472] ACPI: BGRT 0x00000000D9F058C0 000038 (v00 01072009 AMI 00010013)
[ 0.008474] ACPI: UEFI 0x00000000D9F058F8 000044 (v01 INTEL RstSataR 00000000 ?? 00000000)
[ 0.008476] ACPI: UEFI 0x00000000D9F05940 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
[ 0.008482] ACPI: Local APIC address 0xfee00000
[ 0.008550] No NUMA configuration found
[ 0.008550] Faking a node at [mem 0x0000000000000000-0x000000041e7fffff]
[ 0.008553] NODE_DATA(0) allocated [mem 0x41dffa000-0x41dffefff]
[ 0.008578] Zone ranges:
[ 0.008578] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008579] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008580] Normal [mem 0x0000000100000000-0x000000041e7fffff]
[ 0.008581] Device empty
[ 0.008581] Movable zone start for each node
[ 0.008582] Early memory node ranges
[ 0.008582] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.008583] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.008583] node 0: [mem 0x0000000000100000-0x00000000bf4b7fff]
[ 0.008584] node 0: [mem 0x00000000bf939000-0x00000000d9d9afff]
[ 0.008584] node 0: [mem 0x00000000d9f08000-0x00000000da96bfff]
[ 0.008585] node 0: [mem 0x00000000dbaff000-0x00000000dbafffff]
[ 0.008585] node 0: [mem 0x0000000100000000-0x000000041e7fffff]
[ 0.008808] Zeroed struct page in unavailable ranges: 23781 pages
[ 0.008809] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e7fffff]
[ 0.008810] On node 0 totalpages: 4164379
[ 0.008811] DMA zone: 64 pages used for memmap
[ 0.008812] DMA zone: 22 pages reserved
[ 0.008812] DMA zone: 3996 pages, LIFO batch:0
[ 0.008855] DMA32 zone: 13902 pages used for memmap
[ 0.008855] DMA32 zone: 889727 pages, LIFO batch:63
[ 0.018587] Normal zone: 51104 pages used for memmap
[ 0.018588] Normal zone: 3270656 pages, LIFO batch:63
[ 0.051636] Reserving Intel graphics memory at [mem 0xdd800000-0xdf7fffff]
[ 0.053479] ACPI: PM-Timer IO Port: 0x1808
[ 0.053480] ACPI: Local APIC address 0xfee00000
[ 0.053485] ACPI: LAPIC_NMI (acpi_id[0x01] low level lint[0xcc])
[ 0.053486] ACPI: NMI not connected to LINT 1!
[ 0.053486] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x4c])
[ 0.053487] ACPI: NMI not connected to LINT 1!
[ 0.053487] ACPI: LAPIC_NMI (acpi_id[0x03] dfl res lint[0x0])
[ 0.053487] ACPI: NMI not connected to LINT 1!
[ 0.053488] ACPI: LAPIC_NMI (acpi_id[0x04] res dfl lint[0x8b])
[ 0.053488] ACPI: NMI not connected to LINT 1!
[ 0.053499] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.053501] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.053502] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.053503] ACPI: IRQ0 used by override.
[ 0.053503] ACPI: IRQ9 used by override.
[ 0.053505] Using ACPI (MADT) for SMP configuration information
[ 0.053506] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.053514] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.053532] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.053533] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.053534] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.053535] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.053536] PM: Registered nosave memory: [mem 0xbf4b8000-0xbf938fff]
[ 0.053537] PM: Registered nosave memory: [mem 0xd9d9b000-0xd9ed6fff]
[ 0.053538] PM: Registered nosave memory: [mem 0xd9ed7000-0xd9f07fff]
[ 0.053539] PM: Registered nosave memory: [mem 0xda96c000-0xdaddcfff]
[ 0.053539] PM: Registered nosave memory: [mem 0xdaddd000-0xdba5efff]
[ 0.053540] PM: Registered nosave memory: [mem 0xdba5f000-0xdbafefff]
[ 0.053541] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
[ 0.053541] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff]
[ 0.053542] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.053542] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.053542] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.053543] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.053543] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.053544] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.053544] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.053544] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.053545] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.053545] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.053546] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.053546] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.053548] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.053549] Booting paravirtualized kernel on bare hardware
[ 0.053551] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.120888] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.121094] percpu: Embedded 53 pages/cpu s176984 r8192 d31912 u524288
[ 0.121099] pcpu-alloc: s176984 r8192 d31912 u524288 alloc=1*2097152
[ 0.121100] pcpu-alloc: [0] 0 1 2 3
[ 0.121116] Built 1 zonelists, mobility grouping on. Total pages: 4099287
[ 0.121117] Policy zone: Normal
[ 0.121118] Kernel command line: BOOT_IMAGE=/vmlinuz-5.2.0-2-amd64 root=UUID=aa6034bb-8cc1-4111-a0a7-9b3f5e13e281 ro quiet noisapnp initcall_debug log_buf_len=8M random.trust_cpu=on cryptomgr.notests i915.fastboot=0 systemd.verity=0 kmemleak=on
[ 0.125405] Calgary: detecting Calgary via BIOS EBDA area
[ 0.125407] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.161032] Memory: 16199400K/16657516K available (10243K kernel code, 1189K rwdata, 3400K rodata, 1640K init, 2160K bss, 458116K reserved, 0K cma-reserved)
[ 0.161128] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.161137] Kernel/User page tables isolation: enabled
[ 0.161147] ftrace: allocating 32854 entries in 129 pages
[ 0.170646] rcu: Hierarchical RCU implementation.
[ 0.170646] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.170647] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.170648] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.173170] NR_IRQS: 33024, nr_irqs: 728, preallocated irqs: 16
[ 0.173368] random: crng done (trusting CPU's manufacturer)
[ 0.173381] calling con_init+0x0/0x223 @ 0
[ 0.173389] Console: colour dummy device 80x25
[ 0.173392] printk: console [tty0] enabled
[ 0.173393] initcall con_init+0x0/0x223 returned 0 after 0 usecs
[ 0.173394] calling hvc_console_init+0x0/0x14 @ 0
[ 0.173395] initcall hvc_console_init+0x0/0x14 returned 0 after 0 usecs
[ 0.173397] calling xen_cons_init+0x0/0x50 @ 0
[ 0.173398] initcall xen_cons_init+0x0/0x50 returned 0 after 0 usecs
[ 0.173399] calling univ8250_console_init+0x0/0x27 @ 0
[ 0.173401] initcall univ8250_console_init+0x0/0x27 returned 0 after 0 usecs
[ 0.173413] ACPI: Core revision 20190509
[ 0.173624] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.173630] hpet clockevent registered
[ 0.173634] APIC: Switch to symmetric I/O mode setup
[ 0.173635] DMAR: Host address width 39
[ 0.173636] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.173640] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.173640] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.173643] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.173643] DMAR: RMRR base: 0x000000db9b7000 end: 0x000000db9c5fff
[ 0.173644] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff
[ 0.173646] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.173646] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.173647] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.173647] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.174086] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.174086] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.174638] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.193639] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25631b11017, max_idle_ns: 440795283523 ns
[ 0.193641] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.46 BogoMIPS (lpj=10374928)
[ 0.193643] pid_max: default: 32768 minimum: 301
[ 0.196096] LSM: Security Framework initializing
[ 0.196100] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.196116] AppArmor: AppArmor initialized
[ 0.196117] TOMOYO Linux initialized
[ 0.198025] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.198996] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.199036] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.199068] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.199262] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.199271] process: using mwait in idle threads
[ 0.199272] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.199273] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.199274] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.199275] Spectre V2 : Mitigation: Full generic retpoline
[ 0.199276] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.199276] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.199278] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.199278] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.199280] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.199282] MDS: Mitigation: Clear CPU buffers
[ 0.199463] Freeing SMP alternatives memory: 24K
[ 0.201704] TSC deadline timer enabled
[ 0.201706] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.201798] calling trace_init_flags_sys_enter+0x0/0xf @ 1
[ 0.201800] initcall trace_init_flags_sys_enter+0x0/0xf returned 0 after 0 usecs
[ 0.201801] calling trace_init_flags_sys_exit+0x0/0xf @ 1
[ 0.201802] initcall trace_init_flags_sys_exit+0x0/0xf returned 0 after 0 usecs
[ 0.201803] calling init_hw_perf_events+0x0/0x62f @ 1
[ 0.201803] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.201809] ... version: 3
[ 0.201810] ... bit width: 48
[ 0.201810] ... generic registers: 4
[ 0.201811] ... value mask: 0000ffffffffffff
[ 0.201811] ... max period: 00007fffffffffff
[ 0.201811] ... fixed-purpose events: 3
[ 0.201812] ... event mask: 000000070000000f
[ 0.201820] initcall init_hw_perf_events+0x0/0x62f returned 0 after 0 usecs
[ 0.201822] calling init_real_mode+0x0/0x1b3 @ 1
[ 0.201829] initcall init_real_mode+0x0/0x1b3 returned 0 after 0 usecs
[ 0.201831] calling trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1
[ 0.201832] initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs
[ 0.201833] calling register_nmi_cpu_backtrace_handler+0x0/0x16 @ 1
[ 0.201834] initcall register_nmi_cpu_backtrace_handler+0x0/0x16 returned 0 after 0 usecs
[ 0.201836] calling kvm_setup_vsyscall_timeinfo+0x0/0xf0 @ 1
[ 0.201837] initcall kvm_setup_vsyscall_timeinfo+0x0/0xf0 returned 0 after 0 usecs
[ 0.201838] calling spawn_ksoftirqd+0x0/0x39 @ 1
[ 0.201854] initcall spawn_ksoftirqd+0x0/0x39 returned 0 after 0 usecs
[ 0.201855] calling migration_init+0x0/0x34 @ 1
[ 0.201856] initcall migration_init+0x0/0x34 returned 0 after 0 usecs
[ 0.201857] calling srcu_bootup_announce+0x0/0x30 @ 1
[ 0.201858] rcu: Hierarchical SRCU implementation.
[ 0.201859] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[ 0.201860] calling rcu_spawn_gp_kthread+0x0/0x11c @ 1
[ 0.201870] initcall rcu_spawn_gp_kthread+0x0/0x11c returned 0 after 0 usecs
[ 0.201871] calling check_cpu_stall_init+0x0/0x1b @ 1
[ 0.201872] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[ 0.201873] calling rcu_sysrq_init+0x0/0x22 @ 1
[ 0.201874] initcall rcu_sysrq_init+0x0/0x22 returned 0 after 0 usecs
[ 0.201876] calling cpu_stop_init+0x0/0x86 @ 1
[ 0.201888] initcall cpu_stop_init+0x0/0x86 returned 0 after 0 usecs
[ 0.201889] calling init_events+0x0/0x40 @ 1
[ 0.201896] initcall init_events+0x0/0x40 returned 0 after 0 usecs
[ 0.201897] calling init_trace_printk+0x0/0xc @ 1
[ 0.201898] initcall init_trace_printk+0x0/0xc returned 0 after 0 usecs
[ 0.201899] calling event_trace_enable_again+0x0/0x21 @ 1
[ 0.201900] initcall event_trace_enable_again+0x0/0x21 returned 0 after 0 usecs
[ 0.201901] calling jump_label_init_module+0x0/0x11 @ 1
[ 0.201902] initcall jump_label_init_module+0x0/0x11 returned 0 after 0 usecs
[ 0.201904] calling dynamic_debug_init+0x0/0x23a @ 1
[ 0.202141] initcall dynamic_debug_init+0x0/0x23a returned 0 after 0 usecs
[ 0.202144] calling efi_memreserve_root_init+0x0/0x26 @ 1
[ 0.202145] initcall efi_memreserve_root_init+0x0/0x26 returned 0 after 0 usecs
[ 0.202146] calling initialize_ptr_random+0x0/0x4b @ 1
[ 0.202150] initcall initialize_ptr_random+0x0/0x4b returned 0 after 0 usecs
[ 0.202375] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.202411] smp: Bringing up secondary CPUs ...
[ 0.202467] x86: Booting SMP configuration:
[ 0.202468] .... node #0, CPUs: #1 #2
[ 0.203977] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.203977] #3
[ 0.203977] smp: Brought up 1 node, 4 CPUs
[ 0.203977] smpboot: Max logical packages: 1
[ 0.203977] smpboot: Total of 4 processors activated (20749.85 BogoMIPS)
[ 0.205968] devtmpfs: initialized
[ 0.205968] x86/mm: Memory block size: 128MB
[ 0.206489] calling bpf_jit_charge_init+0x0/0x35 @ 1
[ 0.206490] initcall bpf_jit_charge_init+0x0/0x35 returned 0 after 0 usecs
[ 0.206493] calling ipc_ns_init+0x0/0x3f @ 1
[ 0.206495] initcall ipc_ns_init+0x0/0x3f returned 0 after 0 usecs
[ 0.206496] calling init_mmap_min_addr+0x0/0x27 @ 1
[ 0.206497] initcall init_mmap_min_addr+0x0/0x27 returned 0 after 0 usecs
[ 0.206499] calling pci_realloc_setup_params+0x0/0x29 @ 1
[ 0.206500] initcall pci_realloc_setup_params+0x0/0x29 returned 0 after 0 usecs
[ 0.206502] calling net_ns_init+0x0/0x111 @ 1
[ 0.206511] initcall net_ns_init+0x0/0x111 returned 0 after 0 usecs
[ 0.206511] calling xen_pvh_gnttab_setup+0x0/0x34 @ 1
[ 0.206511] initcall xen_pvh_gnttab_setup+0x0/0x34 returned -19 after 0 usecs
[ 0.206511] calling e820__register_nvs_regions+0x0/0x38 @ 1
[ 0.206511] PM: Registering ACPI NVS region [mem 0xda96c000-0xdaddcfff] (4657152 bytes)
[ 0.206511] initcall e820__register_nvs_regions+0x0/0x38 returned 0 after 0 usecs
[ 0.206511] calling cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[ 0.206511] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[ 0.206511] calling reboot_init+0x0/0x3d @ 1
[ 0.206511] initcall reboot_init+0x0/0x3d returned 0 after 0 usecs
[ 0.206511] calling init_lapic_sysfs+0x0/0x21 @ 1
[ 0.206511] initcall init_lapic_sysfs+0x0/0x21 returned 0 after 0 usecs
[ 0.206511] calling alloc_frozen_cpus+0x0/0x8 @ 1
[ 0.206511] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[ 0.206511] calling cpu_hotplug_pm_sync_init+0x0/0x14 @ 1
[ 0.206511] initcall cpu_hotplug_pm_sync_init+0x0/0x14 returned 0 after 0 usecs
[ 0.206511] calling wq_sysfs_init+0x0/0x2b @ 1
[ 0.206511] initcall wq_sysfs_init+0x0/0x2b returned 0 after 0 usecs
[ 0.206511] calling ksysfs_init+0x0/0x93 @ 1
[ 0.206511] initcall ksysfs_init+0x0/0x93 returned 0 after 0 usecs
[ 0.206511] calling pm_init+0x0/0x73 @ 1
[ 0.206511] initcall pm_init+0x0/0x73 returned 0 after 0 usecs
[ 0.206511] calling pm_disk_init+0x0/0x18 @ 1
[ 0.206511] initcall pm_disk_init+0x0/0x18 returned 0 after 0 usecs
[ 0.206511] calling swsusp_header_init+0x0/0x30 @ 1
[ 0.206511] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[ 0.206511] calling rcu_set_runtime_mode+0x0/0x12 @ 1
[ 0.206511] initcall rcu_set_runtime_mode+0x0/0x12 returned 0 after 0 usecs
[ 0.206511] calling init_jiffies_clocksource+0x0/0x18 @ 1
[ 0.206511] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.206511] initcall init_jiffies_clocksource+0x0/0x18 returned 0 after 0 usecs
[ 0.206511] calling futex_init+0x0/0xf9 @ 1
[ 0.206511] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.206511] initcall futex_init+0x0/0xf9 returned 0 after 0 usecs
[ 0.206511] calling cgroup_wq_init+0x0/0x29 @ 1
[ 0.206511] initcall cgroup_wq_init+0x0/0x29 returned 0 after 0 usecs
[ 0.206511] calling cgroup1_wq_init+0x0/0x29 @ 1
[ 0.206511] initcall cgroup1_wq_init+0x0/0x29 returned 0 after 0 usecs
[ 0.206511] calling ftrace_mod_cmd_init+0x0/0xc @ 1
[ 0.206511] initcall ftrace_mod_cmd_init+0x0/0xc returned 0 after 0 usecs
[ 0.206511] calling init_graph_trace+0x0/0x5d @ 1
[ 0.206511] initcall init_graph_trace+0x0/0x5d returned 0 after 0 usecs
[ 0.206511] calling init_zero_pfn+0x0/0x38 @ 1
[ 0.206511] initcall init_zero_pfn+0x0/0x38 returned 0 after 0 usecs
[ 0.206511] calling init_per_zone_wmark_min+0x0/0x70 @ 1
[ 0.206511] initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 0 usecs
[ 0.206511] calling memory_failure_init+0x0/0x9f @ 1
[ 0.206511] initcall memory_failure_init+0x0/0x9f returned 0 after 0 usecs
[ 0.206511] calling fsnotify_init+0x0/0x49 @ 1
[ 0.206511] initcall fsnotify_init+0x0/0x49 returned 0 after 0 usecs
[ 0.206511] calling filelock_init+0x0/0x8c @ 1
[ 0.206511] initcall filelock_init+0x0/0x8c returned 0 after 0 usecs
[ 0.206511] calling init_script_binfmt+0x0/0x16 @ 1
[ 0.206511] initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.206511] calling init_elf_binfmt+0x0/0x16 @ 1
[ 0.206511] initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.206511] calling init_compat_elf_binfmt+0x0/0x16 @ 1
[ 0.206511] initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.206511] calling debugfs_init+0x0/0x51 @ 1
[ 0.206511] initcall debugfs_init+0x0/0x51 returned 0 after 0 usecs
[ 0.206511] calling tracefs_init+0x0/0x3b @ 1
[ 0.206511] initcall tracefs_init+0x0/0x3b returned 0 after 0 usecs
[ 0.206511] calling securityfs_init+0x0/0x69 @ 1
[ 0.206511] initcall securityfs_init+0x0/0x69 returned 0 after 0 usecs
[ 0.206511] calling prandom_init+0x0/0xb8 @ 1
[ 0.206511] initcall prandom_init+0x0/0xb8 returned 0 after 0 usecs
[ 0.206511] calling pinctrl_init+0x0/0xae @ 1
[ 0.206511] pinctrl core: initialized pinctrl subsystem
[ 0.206511] initcall pinctrl_init+0x0/0xae returned 0 after 0 usecs
[ 0.206511] calling gpiolib_dev_init+0x0/0xcb @ 1
[ 0.206511] initcall gpiolib_dev_init+0x0/0xcb returned 0 after 0 usecs
[ 0.206511] calling sfi_sysfs_init+0x0/0xcd @ 1
[ 0.206511] initcall sfi_sysfs_init+0x0/0xcd returned 0 after 0 usecs
[ 0.206511] calling regulator_init+0x0/0x8c @ 1
[ 0.206511] probe of reg-dummy returned 1 after 0 usecs
[ 0.206511] initcall regulator_init+0x0/0x8c returned 0 after 0 usecs
[ 0.206511] calling iommu_init+0x0/0x2b @ 1
[ 0.206511] initcall iommu_init+0x0/0x2b returned 0 after 0 usecs
[ 0.206511] calling component_debug_init+0x0/0x1d @ 1
[ 0.206511] initcall component_debug_init+0x0/0x1d returned 0 after 0 usecs
[ 0.206511] calling opp_debug_init+0x0/0x1d @ 1
[ 0.206511] initcall opp_debug_init+0x0/0x1d returned 0 after 0 usecs
[ 0.206511] calling cpufreq_core_init+0x0/0x48 @ 1
[ 0.206511] initcall cpufreq_core_init+0x0/0x48 returned 0 after 0 usecs
[ 0.206511] calling cpuidle_init+0x0/0x3b @ 1
[ 0.206511] initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
[ 0.206511] calling capsule_reboot_register+0x0/0x11 @ 1
[ 0.206511] initcall capsule_reboot_register+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling bsp_pm_check_init+0x0/0x14 @ 1
[ 0.206511] initcall bsp_pm_check_init+0x0/0x14 returned 0 after 0 usecs
[ 0.206511] calling sock_init+0x0/0x94 @ 1
[ 0.206511] initcall sock_init+0x0/0x94 returned 0 after 0 usecs
[ 0.206511] calling net_inuse_init+0x0/0x24 @ 1
[ 0.206511] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[ 0.206511] calling net_defaults_init+0x0/0x24 @ 1
[ 0.206511] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[ 0.206511] calling init_default_flow_dissectors+0x0/0x50 @ 1
[ 0.206511] initcall init_default_flow_dissectors+0x0/0x50 returned 0 after 0 usecs
[ 0.206511] calling netpoll_init+0x0/0x28 @ 1
[ 0.206511] initcall netpoll_init+0x0/0x28 returned 0 after 0 usecs
[ 0.206511] calling netlink_proto_init+0x0/0x160 @ 1
[ 0.206511] NET: Registered protocol family 16
[ 0.206511] initcall netlink_proto_init+0x0/0x160 returned 0 after 0 usecs
[ 0.206511] calling tcp_bpf_v4_build_proto+0x0/0x6c @ 1
[ 0.206511] initcall tcp_bpf_v4_build_proto+0x0/0x6c returned 0 after 0 usecs
[ 0.206511] calling __gnttab_init+0x0/0x30 @ 1
[ 0.206511] initcall __gnttab_init+0x0/0x30 returned -19 after 0 usecs
[ 0.206511] calling irq_sysfs_init+0x0/0x94 @ 1
[ 0.206511] initcall irq_sysfs_init+0x0/0x94 returned 0 after 0 usecs
[ 0.206511] calling audit_init+0x0/0x16c @ 1
[ 0.206511] audit: initializing netlink subsys (disabled)
[ 0.206511] initcall audit_init+0x0/0x16c returned 0 after 0 usecs
[ 0.206511] audit: type=2000 audit(1565425390.032:1): state=initialized audit_enabled=0 res=1
[ 0.206511] calling release_early_probes+0x0/0x38 @ 1
[ 0.206511] initcall release_early_probes+0x0/0x38 returned 0 after 0 usecs
[ 0.206511] calling bdi_class_init+0x0/0x49 @ 1
[ 0.206511] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs
[ 0.206511] calling mm_sysfs_init+0x0/0x29 @ 1
[ 0.206511] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[ 0.206511] calling gpiolib_sysfs_init+0x0/0xa0 @ 1
[ 0.206511] initcall gpiolib_sysfs_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.206511] calling pcibus_class_init+0x0/0x18 @ 1
[ 0.206511] initcall pcibus_class_init+0x0/0x18 returned 0 after 0 usecs
[ 0.206511] calling pci_driver_init+0x0/0x22 @ 1
[ 0.206511] initcall pci_driver_init+0x0/0x22 returned 0 after 0 usecs
[ 0.206511] calling backlight_class_init+0x0/0xa6 @ 1
[ 0.206511] initcall backlight_class_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.206511] calling xenbus_init+0x0/0x28b @ 1
[ 0.206511] initcall xenbus_init+0x0/0x28b returned -19 after 0 usecs
[ 0.206511] calling tty_class_init+0x0/0x34 @ 1
[ 0.206511] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs
[ 0.206511] calling vtconsole_class_init+0x0/0xd8 @ 1
[ 0.206511] initcall vtconsole_class_init+0x0/0xd8 returned 0 after 0 usecs
[ 0.206511] calling serdev_init+0x0/0x1d @ 1
[ 0.206511] initcall serdev_init+0x0/0x1d returned 0 after 0 usecs
[ 0.206511] calling iommu_dev_init+0x0/0x18 @ 1
[ 0.206511] initcall iommu_dev_init+0x0/0x18 returned 0 after 0 usecs
[ 0.206511] calling mipi_dsi_bus_init+0x0/0x11 @ 1
[ 0.206511] initcall mipi_dsi_bus_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling software_node_init+0x0/0x2b @ 1
[ 0.206511] initcall software_node_init+0x0/0x2b returned 0 after 0 usecs
[ 0.206511] calling wakeup_sources_debugfs_init+0x0/0x24 @ 1
[ 0.206511] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.206511] calling register_node_type+0x0/0x2f @ 1
[ 0.206511] initcall register_node_type+0x0/0x2f returned 0 after 0 usecs
[ 0.206511] calling regmap_initcall+0x0/0xd @ 1
[ 0.206511] initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
[ 0.206511] calling spi_init+0x0/0xa5 @ 1
[ 0.206511] initcall spi_init+0x0/0xa5 returned 0 after 0 usecs
[ 0.206511] calling i2c_init+0x0/0xc0 @ 1
[ 0.206511] initcall i2c_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.206511] calling init_ladder+0x0/0x24 @ 1
[ 0.206511] cpuidle: using governor ladder
[ 0.206511] initcall init_ladder+0x0/0x24 returned 0 after 0 usecs
[ 0.206511] calling init_menu+0x0/0x11 @ 1
[ 0.206511] cpuidle: using governor menu
[ 0.206511] initcall init_menu+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling pcc_init+0x0/0x93 @ 1
[ 0.206511] Detected 1 PCC Subspaces
[ 0.206511] Registering PCC driver as Mailbox controller
[ 0.206511] probe of PCCT returned 1 after 0 usecs
[ 0.206511] initcall pcc_init+0x0/0x93 returned 0 after 0 usecs
[ 0.206511] calling amd_postcore_init+0x0/0x126 @ 1
[ 0.206511] initcall amd_postcore_init+0x0/0x126 returned 0 after 0 usecs
[ 0.206511] calling kobject_uevent_init+0x0/0xc @ 1
[ 0.206511] initcall kobject_uevent_init+0x0/0xc returned 0 after 0 usecs
[ 0.206511] calling bts_init+0x0/0xbb @ 1
[ 0.206511] initcall bts_init+0x0/0xbb returned -19 after 0 usecs
[ 0.206511] calling pt_init+0x0/0x352 @ 1
[ 0.206511] initcall pt_init+0x0/0x352 returned 0 after 0 usecs
[ 0.206511] calling boot_params_ksysfs_init+0x0/0x277 @ 1
[ 0.206511] initcall boot_params_ksysfs_init+0x0/0x277 returned 0 after 0 usecs
[ 0.206511] calling sbf_init+0x0/0xcb @ 1
[ 0.206511] initcall sbf_init+0x0/0xcb returned 0 after 0 usecs
[ 0.206511] calling arch_kdebugfs_init+0x0/0x24 @ 1
[ 0.206511] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.206511] calling intel_pconfig_init+0x0/0xe9 @ 1
[ 0.206511] initcall intel_pconfig_init+0x0/0xe9 returned 0 after 0 usecs
[ 0.206511] calling mtrr_if_init+0x0/0x5e @ 1
[ 0.206511] initcall mtrr_if_init+0x0/0x5e returned 0 after 0 usecs
[ 0.206511] calling ffh_cstate_init+0x0/0x2a @ 1
[ 0.206511] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
[ 0.206511] calling activate_jump_labels+0x0/0x32 @ 1
[ 0.206511] initcall activate_jump_labels+0x0/0x32 returned 0 after 0 usecs
[ 0.206511] calling kvm_setup_pv_tlb_flush+0x0/0x76 @ 1
[ 0.206511] initcall kvm_setup_pv_tlb_flush+0x0/0x76 returned 0 after 0 usecs
[ 0.206511] calling gigantic_pages_init+0x0/0x2f @ 1
[ 0.206511] initcall gigantic_pages_init+0x0/0x2f returned 0 after 0 usecs
[ 0.206511] calling kcmp_cookies_init+0x0/0x38 @ 1
[ 0.206511] initcall kcmp_cookies_init+0x0/0x38 returned 0 after 0 usecs
[ 0.206511] calling cryptomgr_init+0x0/0x11 @ 1
[ 0.206511] initcall cryptomgr_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling acpi_pci_init+0x0/0x62 @ 1
[ 0.206511] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.206511] ACPI: bus type PCI registered
[ 0.206511] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.206511] initcall acpi_pci_init+0x0/0x62 returned 0 after 0 usecs
[ 0.206511] calling dma_channel_table_init+0x0/0xd7 @ 1
[ 0.206511] initcall dma_channel_table_init+0x0/0xd7 returned 0 after 0 usecs
[ 0.206511] calling dma_bus_init+0x0/0xd5 @ 1
[ 0.206511] initcall dma_bus_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.206511] calling setup_vcpu_hotplug_event+0x0/0x2b @ 1
[ 0.206511] initcall setup_vcpu_hotplug_event+0x0/0x2b returned -19 after 0 usecs
[ 0.206511] calling register_xen_pci_notifier+0x0/0x2d @ 1
[ 0.206511] initcall register_xen_pci_notifier+0x0/0x2d returned 0 after 0 usecs
[ 0.206511] calling xen_pcpu_init+0x0/0xae @ 1
[ 0.206511] initcall xen_pcpu_init+0x0/0xae returned -19 after 0 usecs
[ 0.206511] calling dmi_id_init+0x0/0x33d @ 1
[ 0.206511] initcall dmi_id_init+0x0/0x33d returned 0 after 0 usecs
[ 0.206511] calling pci_arch_init+0x0/0x66 @ 1
[ 0.206511] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.206511] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.206511] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.206511] PCI: Using configuration type 1 for base access
[ 0.206511] initcall pci_arch_init+0x0/0x66 returned 0 after 0 usecs
[ 0.206511] calling init_vdso+0x0/0x20 @ 1
[ 0.206511] initcall init_vdso+0x0/0x20 returned 0 after 0 usecs
[ 0.206511] calling sysenter_setup+0x0/0x14 @ 1
[ 0.206511] initcall sysenter_setup+0x0/0x14 returned 0 after 0 usecs
[ 0.206511] calling fixup_ht_bug+0x0/0xc3 @ 1
[ 0.206511] initcall fixup_ht_bug+0x0/0xc3 returned 0 after 0 usecs
[ 0.206511] calling topology_init+0x0/0xc1 @ 1
[ 0.206511] initcall topology_init+0x0/0xc1 returned 0 after 0 usecs
[ 0.206511] calling intel_epb_init+0x0/0x69 @ 1
[ 0.206511] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.206511] initcall intel_epb_init+0x0/0x69 returned 0 after 0 usecs
[ 0.206511] calling mtrr_init_finialize+0x0/0x3f @ 1
[ 0.206511] initcall mtrr_init_finialize+0x0/0x3f returned 0 after 0 usecs
[ 0.206511] calling uid_cache_init+0x0/0x9a @ 1
[ 0.206511] initcall uid_cache_init+0x0/0x9a returned 0 after 0 usecs
[ 0.206511] calling param_sysfs_init+0x0/0x1ef @ 1
[ 0.206511] initcall param_sysfs_init+0x0/0x1ef returned 0 after 0 usecs
[ 0.206511] calling user_namespace_sysctl_init+0x0/0x34 @ 1
[ 0.206511] initcall user_namespace_sysctl_init+0x0/0x34 returned 0 after 0 usecs
[ 0.206511] calling proc_schedstat_init+0x0/0x25 @ 1
[ 0.206511] initcall proc_schedstat_init+0x0/0x25 returned 0 after 0 usecs
[ 0.206511] calling pm_sysrq_init+0x0/0x19 @ 1
[ 0.206511] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
[ 0.206511] calling create_proc_profile+0x0/0xd0 @ 1
[ 0.206511] initcall create_proc_profile+0x0/0xd0 returned 0 after 0 usecs
[ 0.206511] calling crash_save_vmcoreinfo_init+0x0/0x5f5 @ 1
[ 0.206511] initcall crash_save_vmcoreinfo_init+0x0/0x5f5 returned 0 after 0 usecs
[ 0.206511] calling crash_notes_memory_init+0x0/0x36 @ 1
[ 0.206511] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
[ 0.206511] calling cgroup_sysfs_init+0x0/0x18 @ 1
[ 0.206511] initcall cgroup_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[ 0.206511] calling cgroup_namespaces_init+0x0/0x8 @ 1
[ 0.206511] initcall cgroup_namespaces_init+0x0/0x8 returned 0 after 0 usecs
[ 0.206511] calling user_namespaces_init+0x0/0x2d @ 1
[ 0.206511] initcall user_namespaces_init+0x0/0x2d returned 0 after 0 usecs
[ 0.206511] calling hung_task_init+0x0/0x5b @ 1
[ 0.206511] initcall hung_task_init+0x0/0x5b returned 0 after 0 usecs
[ 0.206511] calling dev_map_init+0x0/0x14 @ 1
[ 0.206511] initcall dev_map_init+0x0/0x14 returned 0 after 0 usecs
[ 0.206511] calling stack_map_init+0x0/0x4e @ 1
[ 0.206511] initcall stack_map_init+0x0/0x4e returned 0 after 0 usecs
[ 0.206511] calling oom_init+0x0/0x30 @ 1
[ 0.206511] initcall oom_init+0x0/0x30 returned 0 after 0 usecs
[ 0.206511] calling default_bdi_init+0x0/0xa8 @ 1
[ 0.206511] initcall default_bdi_init+0x0/0xa8 returned 0 after 0 usecs
[ 0.206511] calling cgwb_init+0x0/0x29 @ 1
[ 0.206511] initcall cgwb_init+0x0/0x29 returned 0 after 0 usecs
[ 0.206511] calling percpu_enable_async+0x0/0xf @ 1
[ 0.206511] initcall percpu_enable_async+0x0/0xf returned 0 after 0 usecs
[ 0.206511] calling kcompactd_init+0x0/0x90 @ 1
[ 0.206511] initcall kcompactd_init+0x0/0x90 returned 0 after 0 usecs
[ 0.206511] calling init_user_reserve+0x0/0x40 @ 1
[ 0.206511] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.206511] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.206511] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.206511] calling init_reserve_notifier+0x0/0x1f @ 1
[ 0.206511] initcall init_reserve_notifier+0x0/0x1f returned 0 after 0 usecs
[ 0.206511] calling swap_init_sysfs+0x0/0x63 @ 1
[ 0.206511] initcall swap_init_sysfs+0x0/0x63 returned 0 after 0 usecs
[ 0.206511] calling swapfile_init+0x0/0x96 @ 1
[ 0.206511] initcall swapfile_init+0x0/0x96 returned 0 after 0 usecs
[ 0.206511] calling hugetlb_init+0x0/0x510 @ 1
[ 0.206511] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.206511] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.206511] initcall hugetlb_init+0x0/0x510 returned 0 after 0 usecs
[ 0.206511] calling ksm_init+0x0/0x197 @ 1
[ 0.206511] initcall ksm_init+0x0/0x197 returned 0 after 0 usecs
[ 0.206511] calling hugepage_init+0x0/0x157 @ 1
[ 0.206511] initcall hugepage_init+0x0/0x157 returned 0 after 0 usecs
[ 0.206511] calling mem_cgroup_init+0x0/0x146 @ 1
[ 0.206511] initcall mem_cgroup_init+0x0/0x146 returned 0 after 0 usecs
[ 0.206511] calling mem_cgroup_swap_init+0x0/0x6a @ 1
[ 0.206511] initcall mem_cgroup_swap_init+0x0/0x6a returned 0 after 0 usecs
[ 0.206511] calling sel_ib_pkey_init+0x0/0x36 @ 1
[ 0.206511] initcall sel_ib_pkey_init+0x0/0x36 returned 0 after 0 usecs
[ 0.206511] calling crypto_wq_init+0x0/0x2c @ 1
[ 0.206511] initcall crypto_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.206511] calling fips_init+0x0/0x1b @ 1
[ 0.206511] initcall fips_init+0x0/0x1b returned 0 after 0 usecs
[ 0.206511] calling dh_init+0x0/0x20 @ 1
[ 0.206511] alg: self-tests disabled
[ 0.206511] initcall dh_init+0x0/0x20 returned 0 after 0 usecs
[ 0.206511] calling rsa_init+0x0/0x50 @ 1
[ 0.206511] initcall rsa_init+0x0/0x50 returned 0 after 0 usecs
[ 0.206511] calling hmac_module_init+0x0/0x11 @ 1
[ 0.206511] initcall hmac_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling crypto_null_mod_init+0x0/0x66 @ 1
[ 0.206511] initcall crypto_null_mod_init+0x0/0x66 returned 0 after 0 usecs
[ 0.206511] calling md5_mod_init+0x0/0x11 @ 1
[ 0.206511] initcall md5_mod_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling sha1_generic_mod_init+0x0/0x11 @ 1
[ 0.206511] initcall sha1_generic_mod_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling sha256_generic_mod_init+0x0/0x16 @ 1
[ 0.206511] initcall sha256_generic_mod_init+0x0/0x16 returned 0 after 0 usecs
[ 0.206511] calling crypto_ecb_module_init+0x0/0x11 @ 1
[ 0.206511] initcall crypto_ecb_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling crypto_cbc_module_init+0x0/0x11 @ 1
[ 0.206511] initcall crypto_cbc_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling crypto_cts_module_init+0x0/0x11 @ 1
[ 0.206511] initcall crypto_cts_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling crypto_module_init+0x0/0x11 @ 1
[ 0.206511] initcall crypto_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling aes_init+0x0/0x11 @ 1
[ 0.206511] initcall aes_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling deflate_mod_init+0x0/0x3f @ 1
[ 0.206511] initcall deflate_mod_init+0x0/0x3f returned 0 after 0 usecs
[ 0.206511] calling crct10dif_mod_init+0x0/0x11 @ 1
[ 0.206511] initcall crct10dif_mod_init+0x0/0x11 returned 0 after 0 usecs
[ 0.206511] calling lzo_mod_init+0x0/0x3a @ 1
[ 0.206511] initcall lzo_mod_init+0x0/0x3a returned 0 after 0 usecs
[ 0.206511] calling lzorle_mod_init+0x0/0x3a @ 1
[ 0.206511] initcall lzorle_mod_init+0x0/0x3a returned 0 after 0 usecs
[ 0.206511] calling init_bio+0x0/0xd2 @ 1
[ 0.206511] initcall init_bio+0x0/0xd2 returned 0 after 0 usecs
[ 0.206511] calling blk_settings_init+0x0/0x2a @ 1
[ 0.206511] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.206511] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.206511] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.206511] calling blk_softirq_init+0x0/0x71 @ 1
[ 0.206511] initcall blk_softirq_init+0x0/0x71 returned 0 after 0 usecs
[ 0.206511] calling blk_mq_init+0x0/0x2a @ 1
[ 0.206511] initcall blk_mq_init+0x0/0x2a returned 0 after 0 usecs
[ 0.206511] calling genhd_device_init+0x0/0x76 @ 1
[ 0.206511] initcall genhd_device_init+0x0/0x76 returned 0 after 0 usecs
[ 0.206511] calling irq_poll_setup+0x0/0x6c @ 1
[ 0.206511] initcall irq_poll_setup+0x0/0x6c returned 0 after 0 usecs
[ 0.206511] calling byt_gpio_init+0x0/0x13 @ 1
[ 0.206511] initcall byt_gpio_init+0x0/0x13 returned 0 after 0 usecs
[ 0.206511] calling chv_pinctrl_init+0x0/0x13 @ 1
[ 0.206511] initcall chv_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.206511] calling bxt_pinctrl_init+0x0/0x13 @ 1
[ 0.206511] initcall bxt_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.206511] calling cdf_pinctrl_init+0x0/0x13 @ 1
[ 0.206511] initcall cdf_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.206511] calling dnv_pinctrl_init+0x0/0x13 @ 1
[ 0.206511] initcall dnv_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.206511] calling glk_pinctrl_init+0x0/0x13 @ 1
[ 0.206511] initcall glk_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.206511] calling spt_pinctrl_init+0x0/0x13 @ 1
[ 0.206511] initcall spt_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.206511] calling gpiolib_debugfs_init+0x0/0x24 @ 1
[ 0.206511] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.206511] calling pwm_debugfs_init+0x0/0x24 @ 1
[ 0.206511] initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.206511] calling pwm_sysfs_init+0x0/0x18 @ 1
[ 0.206511] initcall pwm_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[ 0.206511] calling pci_slot_init+0x0/0x40 @ 1
[ 0.206511] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.206511] calling fbmem_init+0x0/0xdb @ 1
[ 0.206511] initcall fbmem_init+0x0/0xdb returned 0 after 0 usecs
[ 0.206511] calling scan_for_dmi_ipmi+0x0/0x270 @ 1
[ 0.206511] initcall scan_for_dmi_ipmi+0x0/0x270 returned 0 after 0 usecs
[ 0.206511] calling acpi_init+0x0/0x321 @ 1
[ 0.206511] ACPI: Added _OSI(Module Device)
[ 0.206511] ACPI: Added _OSI(Processor Device)
[ 0.206511] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.206511] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.206511] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.206511] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.206511] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.223697] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.226918] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.229493] ACPI: Dynamic OEM Table Load:
[ 0.229498] ACPI: SSDT 0xFFFF95C68B20BC00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.229875] ACPI: Dynamic OEM Table Load:
[ 0.229879] ACPI: SSDT 0xFFFF95C68B0A0800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.230267] ACPI: Dynamic OEM Table Load:
[ 0.230270] ACPI: SSDT 0xFFFF95C68B1EFE00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.230518] ACPI: EC: EC started
[ 0.230518] ACPI: EC: interrupt blocked
[ 0.231378] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.231378] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.231378] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.231378] ACPI: Interpreter enabled
[ 0.231378] ACPI: (supports S0 S3 S4 S5)
[ 0.231378] ACPI: Using IOAPIC for interrupt routing
[ 0.231378] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.231378] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.238134] ACPI: Power Resource [PG00] (on)
[ 0.238436] ACPI: Power Resource [PG01] (on)
[ 0.238711] ACPI: Power Resource [PG02] (on)
[ 0.251869] ACPI: Power Resource [FN00] (off)
[ 0.251921] ACPI: Power Resource [FN01] (off)
[ 0.251967] ACPI: Power Resource [FN02] (off)
[ 0.252014] ACPI: Power Resource [FN03] (off)
[ 0.252060] ACPI: Power Resource [FN04] (off)
[ 0.252613] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.252617] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.253075] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.253075] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.253375] PCI host bridge to bus 0000:00
[ 0.253376] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.253377] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.253378] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.253379] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.253379] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.253380] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.253381] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.253381] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.253382] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.253383] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.253383] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.253384] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
[ 0.253385] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.253391] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.253396] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.253398] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.253471] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.253480] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.253484] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.253487] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.253498] pci 0000:00:02.0: calling efifb_fixup_resources+0x0/0xf0 @ 1
[ 0.253499] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.253501] pci 0000:00:02.0: efifb_fixup_resources+0x0/0xf0 took 0 usecs
[ 0.253559] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.253566] pci 0000:00:03.0: reg 0x10: [mem 0xf723c000-0xf723ffff 64bit]
[ 0.253635] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[ 0.253647] pci 0000:00:04.0: reg 0x10: [mem 0xf7230000-0xf7237fff 64bit]
[ 0.253735] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.253750] pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
[ 0.253797] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.253856] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.253875] pci 0000:00:16.0: reg 0x10: [mem 0xf7246000-0xf724601f 64bit]
[ 0.253932] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.254006] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 0.254013] pci 0000:00:19.0: calling quirk_f0_vpd_link+0x0/0x60 @ 1
[ 0.254014] pci 0000:00:19.0: quirk_f0_vpd_link+0x0/0x60 took 0 usecs
[ 0.254025] pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
[ 0.254029] pci 0000:00:19.0: reg 0x14: [mem 0xf7243000-0xf7243fff]
[ 0.254033] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.254073] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.254132] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.254146] pci 0000:00:1b.0: reg 0x10: [mem 0xf7238000-0xf723bfff 64bit]
[ 0.254186] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.254255] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.254261] pci 0000:00:1c.0: calling quirk_cmd_compl+0x0/0x70 @ 1
[ 0.254263] pci 0000:00:1c.0: quirk_cmd_compl+0x0/0x70 took 0 usecs
[ 0.254265] pci 0000:00:1c.0: calling quirk_no_aersid+0x0/0x30 @ 1
[ 0.254266] pci 0000:00:1c.0: quirk_no_aersid+0x0/0x30 took 0 usecs
[ 0.254312] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x20 @ 1
[ 0.254313] pci 0000:00:1c.0: pci_fixup_transparent_bridge+0x0/0x20 took 0 usecs
[ 0.254348] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.254449] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.254454] pci 0000:00:1c.3: calling quirk_cmd_compl+0x0/0x70 @ 1
[ 0.254456] pci 0000:00:1c.3: quirk_cmd_compl+0x0/0x70 took 0 usecs
[ 0.254457] pci 0000:00:1c.3: calling quirk_no_aersid+0x0/0x30 @ 1
[ 0.254458] pci 0000:00:1c.3: quirk_no_aersid+0x0/0x30 took 0 usecs
[ 0.254503] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x20 @ 1
[ 0.254504] pci 0000:00:1c.3: pci_fixup_transparent_bridge+0x0/0x20 took 0 usecs
[ 0.254538] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.254634] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.254652] pci 0000:00:1d.0: reg 0x10: [mem 0xf7242000-0xf72423ff]
[ 0.254724] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.254789] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.254948] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.254960] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.254965] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.254969] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.254974] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.254980] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.254985] pci 0000:00:1f.2: reg 0x24: [mem 0xf7241000-0xf72417ff]
[ 0.255012] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.255066] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.255080] pci 0000:00:1f.3: reg 0x10: [mem 0xf7240000-0xf72400ff 64bit]
[ 0.255095] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.257013] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
[ 0.257056] pci 0000:01:00.0: reg 0x10: [mem 0xf7101000-0xf7101fff]
[ 0.257067] pci 0000:01:00.0: reg 0x14: [mem 0xf7100000-0xf71007ff]
[ 0.257208] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.267441] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.267445] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.267707] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.267802] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.268023] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.268471] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.268475] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.269764] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.269800] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.269836] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.269871] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.269907] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.269942] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.269977] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.270012] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.271091] ACPI: EC: interrupt unblocked
[ 0.271102] ACPI: EC: event unblocked
[ 0.271117] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.271118] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[ 0.271122] probe of PNP0C09:00 returned 1 after 0 usecs
[ 0.271157] initcall acpi_init+0x0/0x321 returned 0 after 62500 usecs
[ 0.271160] calling adxl_init+0x0/0x18c @ 1
[ 0.271163] initcall adxl_init+0x0/0x18c returned -19 after 0 usecs
[ 0.271164] calling pnp_init+0x0/0x11 @ 1
[ 0.271169] initcall pnp_init+0x0/0x11 returned 0 after 0 usecs
[ 0.271170] calling balloon_init+0x0/0x19e @ 1
[ 0.271171] initcall balloon_init+0x0/0x19e returned -19 after 0 usecs
[ 0.271173] calling xen_setup_shutdown_event+0x0/0x30 @ 1
[ 0.271174] initcall xen_setup_shutdown_event+0x0/0x30 returned -19 after 0 usecs
[ 0.271175] calling xenbus_probe_backend_init+0x0/0x4e @ 1
[ 0.271179] initcall xenbus_probe_backend_init+0x0/0x4e returned 0 after 0 usecs
[ 0.271180] calling xenbus_probe_frontend_init+0x0/0x4e @ 1
[ 0.271185] initcall xenbus_probe_frontend_init+0x0/0x4e returned 0 after 0 usecs
[ 0.271186] calling xen_acpi_pad_init+0x0/0x3c @ 1
[ 0.271187] initcall xen_acpi_pad_init+0x0/0x3c returned -19 after 0 usecs
[ 0.271188] calling misc_init+0x0/0xbf @ 1
[ 0.271193] initcall misc_init+0x0/0xbf returned 0 after 0 usecs
[ 0.271194] calling vga_arb_device_init+0x0/0x26b @ 1
[ 0.271207] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.271207] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.271207] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.271207] vgaarb: loaded
[ 0.271207] initcall vga_arb_device_init+0x0/0x26b returned 0 after 0 usecs
[ 0.271207] calling cn_init+0x0/0xf0 @ 1
[ 0.271207] initcall cn_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.271207] calling dax_core_init+0x0/0xd8 @ 1
[ 0.271207] initcall dax_core_init+0x0/0xd8 returned 0 after 0 usecs
[ 0.271207] calling dma_buf_init+0x0/0xaa @ 1
[ 0.271207] initcall dma_buf_init+0x0/0xaa returned 0 after 0 usecs
[ 0.271207] calling serio_init+0x0/0x2a @ 1
[ 0.271207] initcall serio_init+0x0/0x2a returned 0 after 0 usecs
[ 0.271207] calling input_init+0x0/0xfd @ 1
[ 0.271207] initcall input_init+0x0/0xfd returned 0 after 0 usecs
[ 0.271207] calling rtc_init+0x0/0x4c @ 1
[ 0.271207] initcall rtc_init+0x0/0x4c returned 0 after 0 usecs
[ 0.271207] calling cec_devnode_init+0x0/0xa4 @ 1
[ 0.271207] initcall cec_devnode_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.271207] calling pps_init+0x0/0xaa @ 1
[ 0.271207] pps_core: LinuxPPS API ver. 1 registered
[ 0.271207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.271207] initcall pps_init+0x0/0xaa returned 0 after 0 usecs
[ 0.271207] calling ptp_init+0x0/0x99 @ 1
[ 0.271207] PTP clock support registered
[ 0.271207] initcall ptp_init+0x0/0x99 returned 0 after 0 usecs
[ 0.271207] calling power_supply_class_init+0x0/0x40 @ 1
[ 0.271207] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.271207] calling hwmon_init+0x0/0xf9 @ 1
[ 0.271207] initcall hwmon_init+0x0/0xf9 returned 0 after 0 usecs
[ 0.271207] calling edac_init+0x0/0x70 @ 1
[ 0.271207] EDAC MC: Ver: 3.0.0
[ 0.271952] initcall edac_init+0x0/0x70 returned 0 after 0 usecs
[ 0.271952] calling leds_init+0x0/0x3c @ 1
[ 0.271952] initcall leds_init+0x0/0x3c returned 0 after 0 usecs
[ 0.271952] calling dmi_init+0x0/0x114 @ 1
[ 0.271952] initcall dmi_init+0x0/0x114 returned 0 after 0 usecs
[ 0.271952] calling efisubsys_init+0x0/0x305 @ 1
[ 0.271952] Registered efivars operations
[ 0.273809] initcall efisubsys_init+0x0/0x305 returned 0 after 3906 usecs
[ 0.273809] calling devfreq_init+0x0/0x9c @ 1
[ 0.273809] initcall devfreq_init+0x0/0x9c returned 0 after 0 usecs
[ 0.273809] calling ras_init+0x0/0xf @ 1
[ 0.273809] initcall ras_init+0x0/0xf returned 0 after 0 usecs
[ 0.273809] calling nvmem_init+0x0/0x11 @ 1
[ 0.273809] initcall nvmem_init+0x0/0x11 returned 0 after 0 usecs
[ 0.273809] calling pci_subsys_init+0x0/0x67 @ 1
[ 0.273809] PCI: Using ACPI for IRQ routing
[ 0.274779] PCI: pci_cache_line_size set to 64 bytes
[ 0.279704] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.279705] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.279706] e820: reserve RAM buffer [mem 0xbf4b8000-0xbfffffff]
[ 0.279706] e820: reserve RAM buffer [mem 0xd9d9b000-0xdbffffff]
[ 0.279707] e820: reserve RAM buffer [mem 0xda96c000-0xdbffffff]
[ 0.279708] e820: reserve RAM buffer [mem 0xdbb00000-0xdbffffff]
[ 0.279709] e820: reserve RAM buffer [mem 0x41e800000-0x41fffffff]
[ 0.279711] initcall pci_subsys_init+0x0/0x67 returned 0 after 3906 usecs
[ 0.279712] calling proto_init+0x0/0x11 @ 1
[ 0.279715] initcall proto_init+0x0/0x11 returned 0 after 0 usecs
[ 0.279717] calling net_dev_init+0x0/0x246 @ 1
[ 0.279776] initcall net_dev_init+0x0/0x246 returned 0 after 0 usecs
[ 0.279777] calling neigh_init+0x0/0x85 @ 1
[ 0.279779] initcall neigh_init+0x0/0x85 returned 0 after 0 usecs
[ 0.279780] calling fib_notifier_init+0x0/0x11 @ 1
[ 0.279781] initcall fib_notifier_init+0x0/0x11 returned 0 after 0 usecs
[ 0.279782] calling fib_rules_init+0x0/0xac @ 1
[ 0.279784] initcall fib_rules_init+0x0/0xac returned 0 after 0 usecs
[ 0.279786] calling init_cgroup_netprio+0x0/0x14 @ 1
[ 0.279787] initcall init_cgroup_netprio+0x0/0x14 returned 0 after 0 usecs
[ 0.279789] calling bpf_lwt_init+0x0/0x16 @ 1
[ 0.279790] initcall bpf_lwt_init+0x0/0x16 returned 0 after 0 usecs
[ 0.279791] calling devlink_init+0x0/0x11 @ 1
[ 0.279795] initcall devlink_init+0x0/0x11 returned 0 after 0 usecs
[ 0.279796] calling pktsched_init+0x0/0x10f @ 1
[ 0.279799] initcall pktsched_init+0x0/0x10f returned 0 after 0 usecs
[ 0.279801] calling tc_filter_init+0x0/0x126 @ 1
[ 0.279808] initcall tc_filter_init+0x0/0x126 returned 0 after 0 usecs
[ 0.279809] calling tc_action_init+0x0/0x55 @ 1
[ 0.279810] initcall tc_action_init+0x0/0x55 returned 0 after 0 usecs
[ 0.279812] calling genl_init+0x0/0x36 @ 1
[ 0.279820] initcall genl_init+0x0/0x36 returned 0 after 0 usecs
[ 0.279821] calling wireless_nlevent_init+0x0/0x3a @ 1
[ 0.279823] initcall wireless_nlevent_init+0x0/0x3a returned 0 after 0 usecs
[ 0.279823] calling xen_mcfg_late+0x0/0xb5 @ 1
[ 0.279824] initcall xen_mcfg_late+0x0/0xb5 returned 0 after 0 usecs
[ 0.279848] calling nmi_warning_debugfs+0x0/0x27 @ 1
[ 0.279851] initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 0 usecs
[ 0.279853] calling save_microcode_in_initrd+0x0/0x9d @ 1
[ 0.279863] initcall save_microcode_in_initrd+0x0/0x9d returned 0 after 0 usecs
[ 0.279864] calling hpet_late_init+0x0/0x104 @ 1
[ 0.279871] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.279873] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.281642] initcall hpet_late_init+0x0/0x104 returned 0 after 3906 usecs
[ 0.281643] calling init_amd_nbs+0x0/0x11f @ 1
[ 0.281647] initcall init_amd_nbs+0x0/0x11f returned 0 after 0 usecs
[ 0.281648] calling sugov_register+0x0/0x11 @ 1
[ 0.281650] initcall sugov_register+0x0/0x11 returned 0 after 0 usecs
[ 0.281651] calling clocksource_done_booting+0x0/0x42 @ 1
[ 0.281659] clocksource: Switched to clocksource tsc-early
[ 0.281661] initcall clocksource_done_booting+0x0/0x42 returned 0 after 3 usecs
[ 0.281662] calling tracer_init_tracefs+0x0/0x1d2 @ 1
[ 0.289614] initcall tracer_init_tracefs+0x0/0x1d2 returned 0 after 7778 usecs
[ 0.289615] calling init_trace_printk_function_export+0x0/0x2d @ 1
[ 0.289617] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 0 usecs
[ 0.289618] calling init_graph_tracefs+0x0/0x2d @ 1
[ 0.289619] initcall init_graph_tracefs+0x0/0x2d returned 0 after 0 usecs
[ 0.289621] calling bpf_event_init+0x0/0xf @ 1
[ 0.289622] initcall bpf_event_init+0x0/0xf returned 0 after 0 usecs
[ 0.289623] calling init_kprobe_trace+0x0/0xa2 @ 1
[ 0.289625] initcall init_kprobe_trace+0x0/0xa2 returned 0 after 1 usecs
[ 0.289626] calling init_dynamic_event+0x0/0x3e @ 1
[ 0.289626] initcall init_dynamic_event+0x0/0x3e returned 0 after 0 usecs
[ 0.289626] calling init_uprobe_trace+0x0/0x63 @ 1
[ 0.289626] initcall init_uprobe_trace+0x0/0x63 returned 0 after 1 usecs
[ 0.289626] calling bpf_init+0x0/0x48 @ 1
[ 0.289626] initcall bpf_init+0x0/0x48 returned 0 after 2 usecs
[ 0.289626] calling init_pipe_fs+0x0/0x45 @ 1
[ 0.289653] initcall init_pipe_fs+0x0/0x45 returned 0 after 13 usecs
[ 0.289654] calling cgroup_writeback_init+0x0/0x26 @ 1
[ 0.289670] initcall cgroup_writeback_init+0x0/0x26 returned 0 after 13 usecs
[ 0.289671] calling inotify_user_setup+0x0/0x48 @ 1
[ 0.289677] initcall inotify_user_setup+0x0/0x48 returned 0 after 4 usecs
[ 0.289678] calling eventpoll_init+0x0/0xc9 @ 1
[ 0.289687] initcall eventpoll_init+0x0/0xc9 returned 0 after 7 usecs
[ 0.289688] calling anon_inode_init+0x0/0x59 @ 1
[ 0.289693] initcall anon_inode_init+0x0/0x59 returned 0 after 3 usecs
[ 0.289694] calling init_dax_wait_table+0x0/0x40 @ 1
[ 0.289712] initcall init_dax_wait_table+0x0/0x40 returned 0 after 16 usecs
[ 0.289714] calling proc_locks_init+0x0/0x28 @ 1
[ 0.289716] initcall proc_locks_init+0x0/0x28 returned 0 after 1 usecs
[ 0.289717] calling dquot_init+0x0/0x11d @ 1
[ 0.289718] VFS: Disk quotas dquot_6.6.0
[ 0.289730] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.289731] initcall dquot_init+0x0/0x11d returned 0 after 12 usecs
[ 0.289732] calling quota_init+0x0/0x24 @ 1
[ 0.289739] initcall quota_init+0x0/0x24 returned 0 after 6 usecs
[ 0.289740] calling proc_cmdline_init+0x0/0x22 @ 1
[ 0.289742] initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
[ 0.289743] calling proc_consoles_init+0x0/0x25 @ 1
[ 0.289745] initcall proc_consoles_init+0x0/0x25 returned 0 after 0 usecs
[ 0.289746] calling proc_cpuinfo_init+0x0/0x1f @ 1
[ 0.289747] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 0 usecs
[ 0.289748] calling proc_devices_init+0x0/0x25 @ 1
[ 0.289750] initcall proc_devices_init+0x0/0x25 returned 0 after 0 usecs
[ 0.289751] calling proc_interrupts_init+0x0/0x25 @ 1
[ 0.289752] initcall proc_interrupts_init+0x0/0x25 returned 0 after 0 usecs
[ 0.289753] calling proc_loadavg_init+0x0/0x22 @ 1
[ 0.289755] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
[ 0.289756] calling proc_meminfo_init+0x0/0x22 @ 1
[ 0.289757] initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
[ 0.289758] calling proc_stat_init+0x0/0x1f @ 1
[ 0.289759] initcall proc_stat_init+0x0/0x1f returned 0 after 0 usecs
[ 0.289760] calling proc_uptime_init+0x0/0x22 @ 1
[ 0.289762] initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
[ 0.289763] calling proc_version_init+0x0/0x22 @ 1
[ 0.289764] initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
[ 0.289765] calling proc_softirqs_init+0x0/0x22 @ 1
[ 0.289767] initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
[ 0.289768] calling proc_kcore_init+0x0/0xd0 @ 1
[ 0.289776] initcall proc_kcore_init+0x0/0xd0 returned 0 after 6 usecs
[ 0.289777] calling vmcore_init+0x0/0x166 @ 1
[ 0.289778] initcall vmcore_init+0x0/0x166 returned 0 after 0 usecs
[ 0.289780] calling proc_kmsg_init+0x0/0x22 @ 1
[ 0.289781] initcall proc_kmsg_init+0x0/0x22 returned 0 after 0 usecs
[ 0.289782] calling proc_page_init+0x0/0x56 @ 1
[ 0.289785] initcall proc_page_init+0x0/0x56 returned 0 after 1 usecs
[ 0.289786] calling init_ramfs_fs+0x0/0x20 @ 1
[ 0.289787] initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
[ 0.289788] calling init_hugetlbfs_fs+0x0/0x13b @ 1
[ 0.289803] initcall init_hugetlbfs_fs+0x0/0x13b returned 0 after 12 usecs
[ 0.289805] calling tomoyo_initerface_init+0x0/0x17b @ 1
[ 0.289821] initcall tomoyo_initerface_init+0x0/0x17b returned 0 after 14 usecs
[ 0.289822] calling aa_create_aafs+0x0/0x3ab @ 1
[ 0.289869] AppArmor: AppArmor Filesystem Enabled
[ 0.289870] initcall aa_create_aafs+0x0/0x3ab returned 0 after 45 usecs
[ 0.289872] calling blk_scsi_ioctl_init+0x0/0x399 @ 1
[ 0.289873] initcall blk_scsi_ioctl_init+0x0/0x399 returned 0 after 0 usecs
[ 0.289874] calling dynamic_debug_init_debugfs+0x0/0x62 @ 1
[ 0.289877] initcall dynamic_debug_init_debugfs+0x0/0x62 returned 0 after 2 usecs
[ 0.289879] calling acpi_event_init+0x0/0x2d @ 1
[ 0.289883] initcall acpi_event_init+0x0/0x2d returned 0 after 2 usecs
[ 0.289884] calling pnp_system_init+0x0/0x11 @ 1
[ 0.289893] initcall pnp_system_init+0x0/0x11 returned 0 after 6 usecs
[ 0.289894] calling pnpacpi_init+0x0/0x6a @ 1
[ 0.289895] pnp: PnP ACPI init
[ 0.290097] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.290098] system 00:00: [io 0xffff] has been reserved
[ 0.290099] system 00:00: [io 0xffff] has been reserved
[ 0.290100] system 00:00: [io 0xffff] has been reserved
[ 0.290100] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.290101] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.290104] probe of 00:00 returned 1 after 12 usecs
[ 0.290106] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.290140] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.290171] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.290173] probe of 00:02 returned 1 after 4 usecs
[ 0.290174] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.290242] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.290253] pnp 00:04: Plug and Play ACPI device, IDs DLL062d PNP0f13 (active)
[ 0.290817] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.290922] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.290923] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.290924] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.290925] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.290926] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.290927] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.290928] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.290928] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.290929] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.290930] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.290931] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.290932] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.290934] probe of 00:06 returned 1 after 14 usecs
[ 0.290935] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.291209] probe of 00:07 returned 1 after 2 usecs
[ 0.291211] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.293498] pnp 00:08: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.293534] pnp: PnP ACPI: found 9 devices
[ 0.293537] initcall pnpacpi_init+0x0/0x6a returned 0 after 3554 usecs
[ 0.293539] calling chr_dev_init+0x0/0xa7 @ 1
[ 0.294490] initcall chr_dev_init+0x0/0xa7 returned 0 after 926 usecs
[ 0.294491] calling firmware_class_init+0x0/0xeb @ 1
[ 0.294497] initcall firmware_class_init+0x0/0xeb returned 0 after 3 usecs
[ 0.294498] calling thermal_init+0x0/0xe1 @ 1
[ 0.294506] initcall thermal_init+0x0/0xe1 returned 0 after 5 usecs
[ 0.294508] calling cpufreq_gov_performance_init+0x0/0x11 @ 1
[ 0.294510] initcall cpufreq_gov_performance_init+0x0/0x11 returned 0 after 0 usecs
[ 0.294511] calling cpufreq_gov_dbs_init+0x0/0x11 @ 1
[ 0.294513] initcall cpufreq_gov_dbs_init+0x0/0x11 returned 0 after 0 usecs
[ 0.294514] calling map_properties+0x0/0x52b @ 1
[ 0.294515] initcall map_properties+0x0/0x52b returned 0 after 0 usecs
[ 0.294516] calling init_acpi_pm_clocksource+0x0/0xdb @ 1
[ 0.299012] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.299014] initcall init_acpi_pm_clocksource+0x0/0xdb returned 0 after 4391 usecs
[ 0.299015] calling pcibios_assign_resources+0x0/0xca @ 1
[ 0.299021] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.299032] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.299038] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.299042] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.299048] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.299049] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.299050] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.299051] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.299051] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.299052] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.299053] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.299054] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.299054] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.299055] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.299056] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.299057] pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window]
[ 0.299058] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.299058] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.299134] initcall pcibios_assign_resources+0x0/0xca returned 0 after 114 usecs
[ 0.299135] calling sysctl_core_init+0x0/0x2b @ 1
[ 0.299146] initcall sysctl_core_init+0x0/0x2b returned 0 after 9 usecs
[ 0.299148] calling eth_offload_init+0x0/0x14 @ 1
[ 0.299149] initcall eth_offload_init+0x0/0x14 returned 0 after 0 usecs
[ 0.299151] calling ipv4_offload_init+0x0/0x74 @ 1
[ 0.299153] initcall ipv4_offload_init+0x0/0x74 returned 0 after 0 usecs
[ 0.299154] calling inet_init+0x0/0x277 @ 1
[ 0.299166] NET: Registered protocol family 2
[ 0.299265] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.299303] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.299427] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.299524] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.299552] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.299586] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.299639] initcall inet_init+0x0/0x277 returned 0 after 471 usecs
[ 0.299640] calling af_unix_init+0x0/0x4e @ 1
[ 0.299643] NET: Registered protocol family 1
[ 0.299646] initcall af_unix_init+0x0/0x4e returned 0 after 5 usecs
[ 0.299647] calling ipv6_offload_init+0x0/0x7f @ 1
[ 0.299649] initcall ipv6_offload_init+0x0/0x7f returned 0 after 0 usecs
[ 0.299649] calling vlan_offload_init+0x0/0x20 @ 1
[ 0.299650] initcall vlan_offload_init+0x0/0x20 returned 0 after 0 usecs
[ 0.299652] calling xsk_init+0x0/0x58 @ 1
[ 0.299652] NET: Registered protocol family 44
[ 0.299653] initcall xsk_init+0x0/0x58 returned 0 after 0 usecs
[ 0.299655] calling pci_apply_final_quirks+0x0/0x132 @ 1
[ 0.299661] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd0 @ 1
[ 0.299664] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.299665] pci 0000:00:02.0: pci_fixup_video+0x0/0xd0 took 2 usecs
[ 0.299672] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x643 @ 1
[ 0.299834] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x643 took 155 usecs
[ 0.299842] pci 0000:00:19.0: calling quirk_e100_interrupt+0x0/0x170 @ 1
[ 0.299844] pci 0000:00:19.0: quirk_e100_interrupt+0x0/0x170 took 0 usecs
[ 0.299860] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x643 @ 1
[ 0.321735] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x643 took 21359 usecs
[ 0.323669] PCI: CLS 64 bytes, default 64
[ 0.323670] initcall pci_apply_final_quirks+0x0/0x132 returned 0 after 23451 usecs
[ 0.323672] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 0.323674] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 1 usecs
[ 0.323676] calling populate_rootfs+0x0/0x106 @ 1
[ 0.323702] Trying to unpack rootfs image as initramfs...
[ 0.340197] Freeing initrd memory: 9380K
[ 0.340251] initcall populate_rootfs+0x0/0x106 returned 0 after 16182 usecs
[ 0.340253] calling pci_iommu_init+0x0/0x3f @ 1
[ 0.361721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.361723] software IO TLB: mapped [mem 0xd1887000-0xd5887000] (64MB)
[ 0.361726] initcall pci_iommu_init+0x0/0x3f returned 0 after 20967 usecs
[ 0.361728] calling calgary_fixup_tce_spaces+0x0/0xf1 @ 1
[ 0.361730] initcall calgary_fixup_tce_spaces+0x0/0xf1 returned -19 after 0 usecs
[ 0.361731] calling ir_dev_scope_init+0x0/0x33 @ 1
[ 0.361733] initcall ir_dev_scope_init+0x0/0x33 returned 0 after 0 usecs
[ 0.361762] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 0.361766] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs
[ 0.361767] calling amd_uncore_init+0x0/0x2c3 @ 1
[ 0.361769] initcall amd_uncore_init+0x0/0x2c3 returned -19 after 0 usecs
[ 0.361770] calling amd_ibs_init+0x0/0x18d @ 1
[ 0.361771] initcall amd_ibs_init+0x0/0x18d returned -19 after 0 usecs
[ 0.361772] calling amd_iommu_pc_init+0x0/0x279 @ 1
[ 0.361773] initcall amd_iommu_pc_init+0x0/0x279 returned -19 after 0 usecs
[ 0.361774] calling msr_init+0x0/0xf1 @ 1
[ 0.361779] initcall msr_init+0x0/0xf1 returned 0 after 3 usecs
[ 0.361781] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 0.361783] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
[ 0.361785] calling i8259A_init_ops+0x0/0x21 @ 1
[ 0.361787] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs
[ 0.361788] calling init_tsc_clocksource+0x0/0xb6 @ 1
[ 0.361791] initcall init_tsc_clocksource+0x0/0xb6 returned 0 after 1 usecs
[ 0.361792] calling add_rtc_cmos+0x0/0xcd @ 1
[ 0.361794] initcall add_rtc_cmos+0x0/0xcd returned 0 after 0 usecs
[ 0.361795] calling i8237A_init_ops+0x0/0x37 @ 1
[ 0.361800] initcall i8237A_init_ops+0x0/0x37 returned -19 after 3 usecs
[ 0.361801] calling thermal_throttle_init_device+0x0/0x42 @ 1
[ 0.361837] initcall thermal_throttle_init_device+0x0/0x42 returned 0 after 32 usecs
[ 0.361838] calling ioapic_init_ops+0x0/0x14 @ 1
[ 0.361839] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.361840] calling register_e820_pmem+0x0/0x42 @ 1
[ 0.361845] initcall register_e820_pmem+0x0/0x42 returned 0 after 4 usecs
[ 0.361846] calling add_pcspkr+0x0/0x6f @ 1
[ 0.361871] initcall add_pcspkr+0x0/0x6f returned 0 after 21 usecs
[ 0.361872] calling sysfb_init+0x0/0x9f @ 1
[ 0.361886] initcall sysfb_init+0x0/0x9f returned 0 after 12 usecs
[ 0.361887] calling audit_classes_init+0x0/0xaf @ 1
[ 0.361891] initcall audit_classes_init+0x0/0xaf returned 0 after 2 usecs
[ 0.361892] calling pt_dump_init+0x0/0x42 @ 1
[ 0.361894] initcall pt_dump_init+0x0/0x42 returned 0 after 0 usecs
[ 0.361895] calling iosf_mbi_init+0x0/0x2e @ 1
[ 0.361910] initcall iosf_mbi_init+0x0/0x2e returned 0 after 12 usecs
[ 0.361911] calling proc_execdomains_init+0x0/0x22 @ 1
[ 0.361915] initcall proc_execdomains_init+0x0/0x22 returned 0 after 2 usecs
[ 0.361917] calling register_warn_debugfs+0x0/0x24 @ 1
[ 0.361921] initcall register_warn_debugfs+0x0/0x24 returned 0 after 2 usecs
[ 0.361922] calling cpuhp_sysfs_init+0x0/0x83 @ 1
[ 0.361933] initcall cpuhp_sysfs_init+0x0/0x83 returned 0 after 8 usecs
[ 0.361935] calling ioresources_init+0x0/0x4a @ 1
[ 0.361938] initcall ioresources_init+0x0/0x4a returned 0 after 1 usecs
[ 0.361939] calling init_sched_debug_procfs+0x0/0x2f @ 1
[ 0.361941] initcall init_sched_debug_procfs+0x0/0x2f returned 0 after 0 usecs
[ 0.361942] calling psi_proc_init+0x0/0x5b @ 1
[ 0.361945] initcall psi_proc_init+0x0/0x5b returned 0 after 1 usecs
[ 0.361946] calling snapshot_device_init+0x0/0x11 @ 1
[ 0.361968] initcall snapshot_device_init+0x0/0x11 returned 0 after 20 usecs
[ 0.361970] calling irq_gc_init_ops+0x0/0x14 @ 1
[ 0.361971] initcall irq_gc_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.361972] calling irq_pm_init_ops+0x0/0x14 @ 1
[ 0.361973] initcall irq_pm_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.361975] calling klp_init+0x0/0x29 @ 1
[ 0.361977] initcall klp_init+0x0/0x29 returned 0 after 1 usecs
[ 0.361978] calling timekeeping_init_ops+0x0/0x14 @ 1
[ 0.361980] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.361981] calling init_clocksource_sysfs+0x0/0x24 @ 1
[ 0.362001] initcall init_clocksource_sysfs+0x0/0x24 returned 0 after 17 usecs
[ 0.362002] calling init_timer_list_procfs+0x0/0x32 @ 1
[ 0.362004] initcall init_timer_list_procfs+0x0/0x32 returned 0 after 0 usecs
[ 0.362005] calling alarmtimer_init+0x0/0x134 @ 1
[ 0.362034] probe of alarmtimer returned 1 after 5 usecs
[ 0.362036] initcall alarmtimer_init+0x0/0x134 returned 0 after 28 usecs
[ 0.362038] calling init_posix_timers+0x0/0x2a @ 1
[ 0.362045] initcall init_posix_timers+0x0/0x2a returned 0 after 6 usecs
[ 0.362047] calling clockevents_init_sysfs+0x0/0xc6 @ 1
[ 0.362087] initcall clockevents_init_sysfs+0x0/0xc6 returned 0 after 37 usecs
[ 0.362088] calling proc_dma_init+0x0/0x22 @ 1
[ 0.362091] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
[ 0.362092] calling modules_wq_init+0x0/0x43 @ 1
[ 0.362094] initcall modules_wq_init+0x0/0x43 returned 0 after 0 usecs
[ 0.362095] calling proc_modules_init+0x0/0x1f @ 1
[ 0.362097] initcall proc_modules_init+0x0/0x1f returned 0 after 0 usecs
[ 0.362099] calling kallsyms_init+0x0/0x22 @ 1
[ 0.362100] initcall kallsyms_init+0x0/0x22 returned 0 after 0 usecs
[ 0.362102] calling pid_namespaces_init+0x0/0x40 @ 1
[ 0.362109] initcall pid_namespaces_init+0x0/0x40 returned 0 after 5 usecs
[ 0.362111] calling audit_watch_init+0x0/0x3c @ 1
[ 0.362112] initcall audit_watch_init+0x0/0x3c returned 0 after 0 usecs
[ 0.362114] calling audit_fsnotify_init+0x0/0x3c @ 1
[ 0.362115] initcall audit_fsnotify_init+0x0/0x3c returned 0 after 0 usecs
[ 0.362117] calling audit_tree_init+0x0/0x72 @ 1
[ 0.362120] initcall audit_tree_init+0x0/0x72 returned 0 after 1 usecs
[ 0.362121] calling init_kprobes+0x0/0x15a @ 1
[ 0.362321] initcall init_kprobes+0x0/0x15a returned 0 after 192 usecs
[ 0.362323] calling seccomp_sysctl_init+0x0/0x2c @ 1
[ 0.362327] initcall seccomp_sysctl_init+0x0/0x2c returned 0 after 2 usecs
[ 0.362329] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 0.362334] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 3 usecs
[ 0.362335] calling init_tracepoints+0x0/0x28 @ 1
[ 0.362337] initcall init_tracepoints+0x0/0x28 returned 0 after 0 usecs
[ 0.362338] calling stack_trace_init+0x0/0xb0 @ 1
[ 0.362346] initcall stack_trace_init+0x0/0xb0 returned 0 after 7 usecs
[ 0.362347] calling init_mmio_trace+0x0/0xc @ 1
[ 0.362350] initcall init_mmio_trace+0x0/0xc returned 0 after 1 usecs
[ 0.362351] calling init_blk_tracer+0x0/0x50 @ 1
[ 0.362357] initcall init_blk_tracer+0x0/0x50 returned 0 after 5 usecs
[ 0.362359] calling perf_event_sysfs_init+0x0/0x84 @ 1
[ 0.362448] initcall perf_event_sysfs_init+0x0/0x84 returned 0 after 86 usecs
[ 0.362450] calling padata_driver_init+0x0/0x39 @ 1
[ 0.362451] initcall padata_driver_init+0x0/0x39 returned 0 after 0 usecs
[ 0.362453] calling system_trusted_keyring_init+0x0/0x61 @ 1
[ 0.362453] Initialise system trusted keyrings
[ 0.362458] initcall system_trusted_keyring_init+0x0/0x61 returned 0 after 4 usecs
[ 0.362460] calling blacklist_init+0x0/0xa0 @ 1
[ 0.362461] Key type blacklist registered
[ 0.362464] initcall blacklist_init+0x0/0xa0 returned 0 after 2 usecs
[ 0.362465] calling kswapd_init+0x0/0x91 @ 1
[ 0.362498] initcall kswapd_init+0x0/0x91 returned 0 after 29 usecs
[ 0.362500] calling extfrag_debug_init+0x0/0x55 @ 1
[ 0.362505] initcall extfrag_debug_init+0x0/0x55 returned 0 after 3 usecs
[ 0.362506] calling mm_compute_batch_init+0x0/0x19 @ 1
[ 0.362508] initcall mm_compute_batch_init+0x0/0x19 returned 0 after 0 usecs
[ 0.362509] calling slab_proc_init+0x0/0x22 @ 1
[ 0.362512] initcall slab_proc_init+0x0/0x22 returned 0 after 0 usecs
[ 0.362513] calling workingset_init+0x0/0x8d @ 1
[ 0.362514] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.362517] initcall workingset_init+0x0/0x8d returned 0 after 2 usecs
[ 0.362518] calling proc_vmalloc_init+0x0/0x30 @ 1
[ 0.362520] initcall proc_vmalloc_init+0x0/0x30 returned 0 after 0 usecs
[ 0.362522] calling procswaps_init+0x0/0x1f @ 1
[ 0.362525] initcall procswaps_init+0x0/0x1f returned 0 after 0 usecs
[ 0.362526] calling init_frontswap+0x0/0x91 @ 1
[ 0.362532] initcall init_frontswap+0x0/0x91 returned 0 after 4 usecs
[ 0.362533] calling slab_sysfs_init+0x0/0xfa @ 1
[ 0.363593] initcall slab_sysfs_init+0x0/0xfa returned 0 after 1033 usecs
[ 0.363594] calling init_zbud+0x0/0x20 @ 1
[ 0.363594] zbud: loaded
[ 0.363595] initcall init_zbud+0x0/0x20 returned 0 after 0 usecs
[ 0.363596] calling fcntl_init+0x0/0x2a @ 1
[ 0.363598] initcall fcntl_init+0x0/0x2a returned 0 after 1 usecs
[ 0.363599] calling proc_filesystems_init+0x0/0x22 @ 1
[ 0.363601] initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
[ 0.363602] calling start_dirtytime_writeback+0x0/0x2a @ 1
[ 0.363603] initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 0 usecs
[ 0.363604] calling blkdev_init+0x0/0x20 @ 1
[ 0.363608] initcall blkdev_init+0x0/0x20 returned 0 after 2 usecs
[ 0.363609] calling dio_init+0x0/0x2d @ 1
[ 0.363611] initcall dio_init+0x0/0x2d returned 0 after 0 usecs
[ 0.363612] calling dnotify_init+0x0/0x79 @ 1
[ 0.363628] initcall dnotify_init+0x0/0x79 returned 0 after 14 usecs
[ 0.363629] calling fanotify_user_setup+0x0/0x77 @ 1
[ 0.363633] initcall fanotify_user_setup+0x0/0x77 returned 0 after 3 usecs
[ 0.363634] calling userfaultfd_init+0x0/0x2e @ 1
[ 0.363645] initcall userfaultfd_init+0x0/0x2e returned 0 after 9 usecs
[ 0.363646] calling aio_setup+0x0/0x79 @ 1
[ 0.363656] initcall aio_setup+0x0/0x79 returned 0 after 8 usecs
[ 0.363657] calling io_uring_init+0x0/0x2d @ 1
[ 0.363659] initcall io_uring_init+0x0/0x2d returned 0 after 0 usecs
[ 0.363660] calling fscrypt_init+0x0/0xb0 @ 1
[ 0.363708] initcall fscrypt_init+0x0/0xb0 returned 0 after 45 usecs
[ 0.363709] calling init_sys32_ioctl+0x0/0x28 @ 1
[ 0.363765] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 53 usecs
[ 0.363766] calling init_devpts_fs+0x0/0x28 @ 1
[ 0.363772] initcall init_devpts_fs+0x0/0x28 returned 0 after 4 usecs
[ 0.363773] calling ipc_init+0x0/0x25 @ 1
[ 0.363778] initcall ipc_init+0x0/0x25 returned 0 after 3 usecs
[ 0.363779] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 0.363785] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 5 usecs
[ 0.363787] calling init_mqueue_fs+0x0/0xdc @ 1
[ 0.363807] initcall init_mqueue_fs+0x0/0xdc returned 0 after 18 usecs
[ 0.363808] calling key_proc_init+0x0/0x64 @ 1
[ 0.363810] initcall key_proc_init+0x0/0x64 returned 0 after 1 usecs
[ 0.363812] calling selinux_nf_ip_init+0x0/0x49 @ 1
[ 0.363813] initcall selinux_nf_ip_init+0x0/0x49 returned 0 after 0 usecs
[ 0.363814] calling init_sel_fs+0x0/0x11e @ 1
[ 0.363816] initcall init_sel_fs+0x0/0x11e returned 0 after 0 usecs
[ 0.363817] calling selnl_init+0x0/0x7d @ 1
[ 0.363822] initcall selnl_init+0x0/0x7d returned 0 after 3 usecs
[ 0.363823] calling sel_netif_init+0x0/0x3b @ 1
[ 0.363824] initcall sel_netif_init+0x0/0x3b returned 0 after 0 usecs
[ 0.363825] calling sel_netnode_init+0x0/0x36 @ 1
[ 0.363827] initcall sel_netnode_init+0x0/0x36 returned 0 after 0 usecs
[ 0.363828] calling sel_netport_init+0x0/0x36 @ 1
[ 0.363829] initcall sel_netport_init+0x0/0x36 returned 0 after 0 usecs
[ 0.363830] calling aurule_init+0x0/0x2b @ 1
[ 0.363832] initcall aurule_init+0x0/0x2b returned 0 after 0 usecs
[ 0.363833] calling apparmor_nf_ip_init+0x0/0x2f @ 1
[ 0.363890] initcall apparmor_nf_ip_init+0x0/0x2f returned 0 after 53 usecs
[ 0.363891] calling platform_keyring_init+0x0/0x26 @ 1
[ 0.363894] Platform Keyring initialized
[ 0.363895] initcall platform_keyring_init+0x0/0x26 returned 0 after 2 usecs
[ 0.363897] calling crypto_algapi_init+0x0/0xd @ 1
[ 0.363899] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
[ 0.363900] calling asymmetric_key_init+0x0/0x11 @ 1
[ 0.363901] Key type asymmetric registered
[ 0.363903] initcall asymmetric_key_init+0x0/0x11 returned 0 after 1 usecs
[ 0.363904] calling x509_key_init+0x0/0x11 @ 1
[ 0.363905] Asymmetric key parser 'x509' registered
[ 0.363906] initcall x509_key_init+0x0/0x11 returned 0 after 0 usecs
[ 0.363907] calling proc_genhd_init+0x0/0x42 @ 1
[ 0.363909] initcall proc_genhd_init+0x0/0x42 returned 0 after 1 usecs
[ 0.363910] calling bsg_init+0x0/0x150 @ 1
[ 0.363913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.363914] initcall bsg_init+0x0/0x150 returned 0 after 3 usecs
[ 0.363915] calling throtl_init+0x0/0x3c @ 1
[ 0.363944] initcall throtl_init+0x0/0x3c returned 0 after 26 usecs
[ 0.363944] calling deadline_init+0x0/0x11 @ 1
[ 0.363945] io scheduler mq-deadline registered
[ 0.363946] initcall deadline_init+0x0/0x11 returned 0 after 0 usecs
[ 0.363947] calling btree_module_init+0x0/0x25 @ 1
[ 0.363950] initcall btree_module_init+0x0/0x25 returned 0 after 2 usecs
[ 0.363951] calling crc_t10dif_mod_init+0x0/0x45 @ 1
[ 0.363954] initcall crc_t10dif_mod_init+0x0/0x45 returned 0 after 2 usecs
[ 0.363955] calling percpu_counter_startup+0x0/0x69 @ 1
[ 0.363969] initcall percpu_counter_startup+0x0/0x69 returned 0 after 12 usecs
[ 0.363970] calling digsig_init+0x0/0x36 @ 1
[ 0.363971] initcall digsig_init+0x0/0x36 returned 0 after 0 usecs
[ 0.363972] calling sg_pool_init+0x0/0xbc @ 1
[ 0.363983] initcall sg_pool_init+0x0/0xbc returned 0 after 9 usecs
[ 0.363983] calling phy_core_init+0x0/0x4a @ 1
[ 0.363986] initcall phy_core_init+0x0/0x4a returned 0 after 2 usecs
[ 0.363987] calling amd_gpio_driver_init+0x0/0x13 @ 1
[ 0.364002] initcall amd_gpio_driver_init+0x0/0x13 returned 0 after 13 usecs
[ 0.364003] calling cnl_pinctrl_driver_init+0x0/0x13 @ 1
[ 0.364011] initcall cnl_pinctrl_driver_init+0x0/0x13 returned 0 after 6 usecs
[ 0.364011] calling icl_pinctrl_driver_init+0x0/0x13 @ 1
[ 0.364018] initcall icl_pinctrl_driver_init+0x0/0x13 returned 0 after 5 usecs
[ 0.364019] calling lbg_pinctrl_driver_init+0x0/0x13 @ 1
[ 0.364027] initcall lbg_pinctrl_driver_init+0x0/0x13 returned 0 after 6 usecs
[ 0.364028] calling pci_proc_init+0x0/0x6c @ 1
[ 0.364042] initcall pci_proc_init+0x0/0x6c returned 0 after 13 usecs
[ 0.364043] calling pcie_portdrv_init+0x0/0x49 @ 1
[ 0.364237] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[ 0.364242] probe of 0000:00:1c.0:pcie001 returned 1 after 24 usecs
[ 0.364292] probe of 0000:00:1c.0 returned 1 after 232 usecs
[ 0.364420] pcieport 0000:00:1c.3: PME: Signaling with IRQ 43
[ 0.364425] probe of 0000:00:1c.3:pcie001 returned 1 after 22 usecs
[ 0.364472] probe of 0000:00:1c.3 returned 1 after 179 usecs
[ 0.364479] initcall pcie_portdrv_init+0x0/0x49 returned 0 after 424 usecs
[ 0.364480] calling pci_hotplug_init+0x0/0x31 @ 1
[ 0.364482] initcall pci_hotplug_init+0x0/0x31 returned 0 after 0 usecs
[ 0.364482] calling shpcd_init+0x0/0x59 @ 1
[ 0.364490] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.364491] initcall shpcd_init+0x0/0x59 returned 0 after 7 usecs
[ 0.364492] calling xenfb_init+0x0/0x3b @ 1
[ 0.364493] initcall xenfb_init+0x0/0x3b returned -19 after 0 usecs
[ 0.364494] calling vesafb_driver_init+0x0/0x13 @ 1
[ 0.364503] initcall vesafb_driver_init+0x0/0x13 returned 0 after 7 usecs
[ 0.364504] calling efifb_driver_init+0x0/0x13 @ 1
[ 0.364510] efifb: probing for efifb
[ 0.364531] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 0.364532] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.364532] efifb: scrolling: redraw
[ 0.364533] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.364589] Console: switching to colour frame buffer device 170x48
[ 0.366118] fb0: EFI VGA frame buffer device
[ 0.366120] probe of efi-framebuffer.0 returned 1 after 1611 usecs
[ 0.366124] initcall efifb_driver_init+0x0/0x13 returned 0 after 1580 usecs
[ 0.366125] calling intel_idle_init+0x0/0x5ce @ 1
[ 0.366127] intel_idle: MWAIT substates: 0x11142120
[ 0.366128] intel_idle: v0.4.1 model 0x3D
[ 0.366280] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.366281] initcall intel_idle_init+0x0/0x5ce returned 0 after 150 usecs
[ 0.366283] calling acpi_processor_driver_init+0x0/0x91 @ 1
[ 0.366332] probe of cpu0 returned 1 after 38 usecs
[ 0.366360] probe of cpu1 returned 1 after 27 usecs
[ 0.366386] probe of cpu2 returned 1 after 25 usecs
[ 0.366413] probe of cpu3 returned 1 after 25 usecs
[ 0.366417] initcall acpi_processor_driver_init+0x0/0x91 returned 0 after 129 usecs
[ 0.366418] calling acpi_thermal_init+0x0/0x7a @ 1
[ 0.367134] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.367135] ACPI: Thermal Zone [THM] (25 C)
[ 0.367139] probe of LNXTHERM:00 returned 1 after 636 usecs
[ 0.367329] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.367330] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.367332] probe of LNXTHERM:01 returned 1 after 189 usecs
[ 0.367462] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.367463] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.367465] probe of LNXTHERM:02 returned 1 after 131 usecs
[ 0.367470] initcall acpi_thermal_init+0x0/0x7a returned 0 after 1024 usecs
[ 0.367471] calling acpi_hed_driver_init+0x0/0x11 @ 1
[ 0.367513] initcall acpi_hed_driver_init+0x0/0x11 returned 0 after 39 usecs
[ 0.367514] calling bgrt_init+0x0/0xb5 @ 1
[ 0.367519] initcall bgrt_init+0x0/0xb5 returned 0 after 2 usecs
[ 0.367520] calling erst_init+0x0/0x2ef @ 1
[ 0.367522] initcall erst_init+0x0/0x2ef returned 0 after 0 usecs
[ 0.367523] calling ghes_init+0x0/0xdf @ 1
[ 0.367525] initcall ghes_init+0x0/0xdf returned -19 after 0 usecs
[ 0.367526] calling extlog_init+0x0/0x36a @ 1
[ 0.367527] initcall extlog_init+0x0/0x36a returned -19 after 0 usecs
[ 0.367529] calling gpio_clk_driver_init+0x0/0x13 @ 1
[ 0.367539] initcall gpio_clk_driver_init+0x0/0x13 returned 0 after 8 usecs
[ 0.367540] calling plt_clk_driver_init+0x0/0x13 @ 1
[ 0.367545] initcall plt_clk_driver_init+0x0/0x13 returned 0 after 4 usecs
[ 0.367546] calling st_clk_driver_init+0x0/0x13 @ 1
[ 0.367550] initcall st_clk_driver_init+0x0/0x13 returned 0 after 3 usecs
[ 0.367551] calling xenbus_probe_initcall+0x0/0x42 @ 1
[ 0.367552] initcall xenbus_probe_initcall+0x0/0x42 returned -19 after 0 usecs
[ 0.367553] calling xenbus_init+0x0/0x36 @ 1
[ 0.367554] initcall xenbus_init+0x0/0x36 returned -19 after 0 usecs
[ 0.367554] calling xenbus_backend_init+0x0/0x3f @ 1
[ 0.367555] initcall xenbus_backend_init+0x0/0x3f returned -19 after 0 usecs
[ 0.367556] calling hyper_sysfs_init+0x0/0x177 @ 1
[ 0.367557] initcall hyper_sysfs_init+0x0/0x177 returned -19 after 0 usecs
[ 0.367558] calling hypervisor_subsys_init+0x0/0x25 @ 1
[ 0.367559] initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
[ 0.367559] calling platform_driver_init+0x0/0x1a @ 1
[ 0.367568] initcall platform_driver_init+0x0/0x1a returned 0 after 7 usecs
[ 0.367569] calling xen_late_init_mcelog+0x0/0x58 @ 1
[ 0.367569] initcall xen_late_init_mcelog+0x0/0x58 returned -19 after 0 usecs
[ 0.367570] calling n_null_init+0x0/0x1f @ 1
[ 0.367571] initcall n_null_init+0x0/0x1f returned 0 after 0 usecs
[ 0.367572] calling pty_init+0x0/0x1eb @ 1
[ 0.367600] initcall pty_init+0x0/0x1eb returned 0 after 26 usecs
[ 0.367601] calling sysrq_init+0x0/0x6c @ 1
[ 0.367604] initcall sysrq_init+0x0/0x6c returned 0 after 1 usecs
[ 0.367605] calling xen_hvc_init+0x0/0x258 @ 1
[ 0.367606] initcall xen_hvc_init+0x0/0x258 returned -19 after 0 usecs
[ 0.367607] calling serial8250_init+0x0/0x15b @ 1
[ 0.367607] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.367787] probe of serial8250 returned 1 after 4 usecs
[ 0.367790] initcall serial8250_init+0x0/0x15b returned 0 after 177 usecs
[ 0.367791] calling serial_pci_driver_init+0x0/0x1a @ 1
[ 0.367805] initcall serial_pci_driver_init+0x0/0x1a returned 0 after 12 usecs
[ 0.367806] calling dw8250_platform_driver_init+0x0/0x13 @ 1
[ 0.367815] initcall dw8250_platform_driver_init+0x0/0x13 returned 0 after 8 usecs
[ 0.367816] calling mid8250_pci_driver_init+0x0/0x1a @ 1
[ 0.367821] initcall mid8250_pci_driver_init+0x0/0x1a returned 0 after 4 usecs
[ 0.367822] calling hpet_init+0x0/0x65 @ 1
[ 0.367926] probe of PNP0103:00 returned 0 after 75 usecs
[ 0.367952] initcall hpet_init+0x0/0x65 returned 0 after 125 usecs
[ 0.367953] calling agp_init+0x0/0x24 @ 1
[ 0.367954] Linux agpgart interface v0.103
[ 0.367955] initcall agp_init+0x0/0x24 returned 0 after 0 usecs
[ 0.367955] calling agp_amd64_mod_init+0x0/0x20 @ 1
[ 0.367975] initcall agp_amd64_mod_init+0x0/0x20 returned -19 after 18 usecs
[ 0.367976] calling agp_intel_init+0x0/0x29 @ 1
[ 0.367982] initcall agp_intel_init+0x0/0x29 returned 0 after 4 usecs
[ 0.367983] calling agp_sis_init+0x0/0x29 @ 1
[ 0.367988] initcall agp_sis_init+0x0/0x29 returned 0 after 4 usecs
[ 0.367989] calling agp_via_init+0x0/0x29 @ 1
[ 0.367994] initcall agp_via_init+0x0/0x29 returned 0 after 3 usecs
[ 0.367995] calling amd_iommu_v2_init+0x0/0x69 @ 1
[ 0.367996] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.367996] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.367997] initcall amd_iommu_v2_init+0x0/0x69 returned 0 after 0 usecs
[ 0.367998] calling cn_proc_init+0x0/0x36 @ 1
[ 0.368000] initcall cn_proc_init+0x0/0x36 returned 0 after 0 usecs
[ 0.368002] calling topology_sysfs_init+0x0/0x30 @ 1
[ 0.368012] initcall topology_sysfs_init+0x0/0x30 returned 0 after 8 usecs
[ 0.368013] calling cacheinfo_sysfs_init+0x0/0x2c @ 1
[ 0.368170] initcall cacheinfo_sysfs_init+0x0/0x2c returned 0 after 151 usecs
[ 0.368171] calling devcoredump_init+0x0/0x18 @ 1
[ 0.368176] initcall devcoredump_init+0x0/0x18 returned 0 after 3 usecs
[ 0.368177] calling mac_hid_init+0x0/0x22 @ 1
[ 0.368180] initcall mac_hid_init+0x0/0x22 returned 0 after 1 usecs
[ 0.368181] calling spidev_init+0x0/0xab @ 1
[ 0.368195] initcall spidev_init+0x0/0xab returned 0 after 4 usecs
[ 0.368196] calling net_olddevs_init+0x0/0x5d @ 1
[ 0.368199] initcall net_olddevs_init+0x0/0x5d returned 0 after 1 usecs
[ 0.368200] calling cavium_ptp_driver_init+0x0/0x1a @ 1
[ 0.368206] initcall cavium_ptp_driver_init+0x0/0x1a returned 0 after 4 usecs
[ 0.368208] calling i8042_init+0x0/0x46f @ 1
[ 0.368217] probe of 00:03 returned 1 after 5 usecs
[ 0.368225] probe of 00:04 returned 1 after 2 usecs
[ 0.368228] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.368872] i8042: Warning: Keylock active
[ 0.371209] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.371212] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.371240] probe of i8042 returned 1 after 2759 usecs
[ 0.371243] initcall i8042_init+0x0/0x46f returned 0 after 2962 usecs
[ 0.371245] calling input_leds_init+0x0/0x11 @ 1
[ 0.371246] initcall input_leds_init+0x0/0x11 returned 0 after 0 usecs
[ 0.371247] calling mousedev_init+0x0/0x81 @ 1
[ 0.371285] mousedev: PS/2 mouse device common for all mice
[ 0.371286] initcall mousedev_init+0x0/0x81 returned 0 after 36 usecs
[ 0.371288] calling atkbd_init+0x0/0x26 @ 1
[ 0.371294] initcall atkbd_init+0x0/0x26 returned 0 after 5 usecs
[ 0.371296] calling xenkbd_init+0x0/0x3b @ 1
[ 0.371297] initcall xenkbd_init+0x0/0x3b returned -19 after 0 usecs
[ 0.371298] calling cmos_init+0x0/0x6a @ 1
[ 0.371321] rtc_cmos 00:01: RTC can wake from S4
[ 0.371456] rtc_cmos 00:01: registered as rtc0
[ 0.371466] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.371468] probe of 00:01 returned 1 after 156 usecs
[ 0.371473] initcall cmos_init+0x0/0x6a returned 0 after 169 usecs
[ 0.371475] calling intel_pstate_init+0x0/0x484 @ 1
[ 0.371479] intel_pstate: Intel P-state driver initializing
[ 0.371598] initcall intel_pstate_init+0x0/0x484 returned 0 after 102 usecs
[ 0.371602] calling ledtrig_disk_init+0x0/0x54 @ 1
[ 0.371608] initcall ledtrig_disk_init+0x0/0x54 returned 0 after 3 usecs
[ 0.371611] calling ledtrig_mtd_init+0x0/0x2e @ 1
[ 0.371615] initcall ledtrig_mtd_init+0x0/0x2e returned 0 after 1 usecs
[ 0.371618] calling ledtrig_cpu_init+0x0/0xd3 @ 1
[ 0.371750] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.371754] initcall ledtrig_cpu_init+0x0/0xd3 returned 0 after 128 usecs
[ 0.371757] calling ledtrig_panic_init+0x0/0x39 @ 1
[ 0.371762] initcall ledtrig_panic_init+0x0/0x39 returned 0 after 2 usecs
[ 0.371765] calling dmi_sysfs_init+0x0/0xdc @ 1
[ 0.372582] initcall dmi_sysfs_init+0x0/0xdc returned 0 after 792 usecs
[ 0.372586] calling efi_load_efivars+0x0/0x71 @ 1
[ 0.372630] initcall efi_load_efivars+0x0/0x71 returned 0 after 39 usecs
[ 0.372634] calling esrt_sysfs_init+0x0/0x2fa @ 1
[ 0.372639] initcall esrt_sysfs_init+0x0/0x2fa returned -38 after 0 usecs
[ 0.372642] calling pmc_atom_init+0x0/0x2b3 @ 1
[ 0.372658] initcall pmc_atom_init+0x0/0x2b3 returned -19 after 10 usecs
[ 0.372662] calling powercap_init+0x0/0x2a1 @ 1
[ 0.372753] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.372867] probe of serio0 returned 1 after 1566 usecs
[ 0.373793] initcall powercap_init+0x0/0x2a1 returned 0 after 1096 usecs
[ 0.373801] calling pm_check_save_msr+0x0/0x20 @ 1
[ 0.373808] initcall pm_check_save_msr+0x0/0x20 returned 0 after 1 usecs
[ 0.373814] calling sock_diag_init+0x0/0x2f @ 1
[ 0.373864] initcall sock_diag_init+0x0/0x2f returned 0 after 42 usecs
[ 0.373871] calling blackhole_init+0x0/0x11 @ 1
[ 0.373879] initcall blackhole_init+0x0/0x11 returned 0 after 1 usecs
[ 0.373886] calling gre_offload_init+0x0/0x49 @ 1
[ 0.373894] initcall gre_offload_init+0x0/0x49 returned 0 after 1 usecs
[ 0.373901] calling sysctl_ipv4_init+0x0/0x4c @ 1
[ 0.374041] initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 129 usecs
[ 0.374047] calling cubictcp_register+0x0/0x58 @ 1
[ 0.374055] initcall cubictcp_register+0x0/0x58 returned 0 after 0 usecs
[ 0.374059] calling inet6_init+0x0/0x35f @ 1
[ 0.374352] NET: Registered protocol family 10
[ 0.377885] probe of serio1 returned 0 after 5009 usecs
[ 0.392933] Segment Routing with IPv6
[ 0.392959] initcall inet6_init+0x0/0x35f returned 0 after 18452 usecs
[ 0.392961] calling mip6_init+0x0/0xb9 @ 1
[ 0.392962] mip6: Mobile IPv6
[ 0.392964] initcall mip6_init+0x0/0xb9 returned 0 after 0 usecs
[ 0.392965] calling packet_init+0x0/0x76 @ 1
[ 0.392966] NET: Registered protocol family 17
[ 0.392970] initcall packet_init+0x0/0x76 returned 0 after 4 usecs
[ 0.392972] calling strp_dev_init+0x0/0x33 @ 1
[ 0.393022] initcall strp_dev_init+0x0/0x33 returned 0 after 46 usecs
[ 0.393024] calling dcbnl_init+0x0/0x4d @ 1
[ 0.393026] initcall dcbnl_init+0x0/0x4d returned 0 after 0 usecs
[ 0.393027] calling mpls_gso_init+0x0/0x2c @ 1
[ 0.393028] mpls_gso: MPLS GSO support
[ 0.393030] initcall mpls_gso_init+0x0/0x2c returned 0 after 1 usecs
[ 0.393032] calling mcheck_init_device+0x0/0x12f @ 1
[ 0.393238] initcall mcheck_init_device+0x0/0x12f returned 0 after 196 usecs
[ 0.393270] calling mcheck_late_init+0x0/0x83 @ 1
[ 0.393271] mce: Using 7 MCE banks
[ 0.393278] initcall mcheck_late_init+0x0/0x83 returned 0 after 5 usecs
[ 0.393279] calling severities_debugfs_init+0x0/0x3b @ 1
[ 0.393282] initcall severities_debugfs_init+0x0/0x3b returned 0 after 1 usecs
[ 0.393284] calling threshold_init_device+0x0/0x4b @ 1
[ 0.393285] initcall threshold_init_device+0x0/0x4b returned 0 after 0 usecs
[ 0.393287] calling microcode_init+0x0/0x1dd @ 1
[ 0.393317] microcode: sig=0x306d4, pf=0x40, revision=0x2d
[ 0.393337] microcode: Microcode Update Driver: v2.2.
[ 0.393340] initcall microcode_init+0x0/0x1dd returned 0 after 48 usecs
[ 0.393342] calling hpet_insert_resource+0x0/0x23 @ 1
[ 0.393345] initcall hpet_insert_resource+0x0/0x23 returned 0 after 1 usecs
[ 0.393347] calling update_mp_table+0x0/0x51d @ 1
[ 0.393349] initcall update_mp_table+0x0/0x51d returned 0 after 0 usecs
[ 0.393350] calling lapic_insert_resource+0x0/0x3f @ 1
[ 0.393352] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs
[ 0.393353] calling print_ICs+0x0/0x18b @ 1
[ 0.393355] initcall print_ICs+0x0/0x18b returned 0 after 0 usecs
[ 0.393356] calling pat_memtype_list_init+0x0/0x32 @ 1
[ 0.393360] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 1 usecs
[ 0.393361] calling create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
[ 0.393364] initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 1 usecs
[ 0.393366] calling create_init_pkru_value+0x0/0x29 @ 1
[ 0.393369] initcall create_init_pkru_value+0x0/0x29 returned 0 after 1 usecs
[ 0.393371] calling init_oops_id+0x0/0x40 @ 1
[ 0.393373] initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs
[ 0.393375] calling sched_clock_init_late+0x0/0x75 @ 1
[ 0.393376] sched_clock: Marking stable (392921289, 309442)->(407757894, -14527163)
[ 0.393441] initcall sched_clock_init_late+0x0/0x75 returned 0 after 62 usecs
[ 0.393442] calling sched_init_debug+0x0/0x3e @ 1
[ 0.393445] initcall sched_init_debug+0x0/0x3e returned 0 after 2 usecs
[ 0.393447] calling pm_qos_power_init+0x0/0x9a @ 1
[ 0.393528] initcall pm_qos_power_init+0x0/0x9a returned 0 after 77 usecs
[ 0.393529] calling pm_debugfs_init+0x0/0x24 @ 1
[ 0.393532] initcall pm_debugfs_init+0x0/0x24 returned 0 after 1 usecs
[ 0.393533] calling printk_late_init+0x0/0x13a @ 1
[ 0.393535] initcall printk_late_init+0x0/0x13a returned 0 after 0 usecs
[ 0.393537] calling swiotlb_create_debugfs+0x0/0x74 @ 1
[ 0.393541] initcall swiotlb_create_debugfs+0x0/0x74 returned 0 after 3 usecs
[ 0.393543] calling tk_debug_sleep_time_init+0x0/0x24 @ 1
[ 0.393546] initcall tk_debug_sleep_time_init+0x0/0x24 returned 0 after 0 usecs
[ 0.393548] calling debugfs_kprobe_init+0x0/0xda @ 1
[ 0.393554] initcall debugfs_kprobe_init+0x0/0xda returned 0 after 4 usecs
[ 0.393555] calling taskstats_init+0x0/0x37 @ 1
[ 0.393562] registered taskstats version 1
[ 0.393563] initcall taskstats_init+0x0/0x37 returned 0 after 5 usecs
[ 0.393565] calling load_system_certificate_list+0x0/0xea @ 1
[ 0.393566] Loading compiled-in X.509 certificates
[ 0.395319] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.395337] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 0.395340] initcall load_system_certificate_list+0x0/0xea returned 0 after 1730 usecs
[ 0.395343] calling fault_around_debugfs+0x0/0x24 @ 1
[ 0.395349] initcall fault_around_debugfs+0x0/0x24 returned 0 after 4 usecs
[ 0.395351] calling max_swapfiles_check+0x0/0x8 @ 1
[ 0.395353] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[ 0.395355] calling init_zswap+0x0/0x43c @ 1
[ 0.395369] zswap: loaded using pool lzo/zbud
[ 0.395430] initcall init_zswap+0x0/0x43c returned 0 after 70 usecs
[ 0.395431] calling split_huge_pages_debugfs+0x0/0x24 @ 1
[ 0.395433] initcall split_huge_pages_debugfs+0x0/0x24 returned 0 after 1 usecs
[ 0.395435] calling check_early_ioremap_leak+0x0/0x39 @ 1
[ 0.395436] initcall check_early_ioremap_leak+0x0/0x39 returned 0 after 0 usecs
[ 0.395437] calling set_hardened_usercopy+0x0/0x20 @ 1
[ 0.395439] initcall set_hardened_usercopy+0x0/0x20 returned 1 after 0 usecs
[ 0.395441] calling pstore_init+0x0/0x14 @ 1
[ 0.395446] initcall pstore_init+0x0/0x14 returned 0 after 3 usecs
[ 0.395447] calling init_root_keyring+0x0/0xa @ 1
[ 0.395453] initcall init_root_keyring+0x0/0xa returned 0 after 4 usecs
[ 0.395455] calling init_profile_hash+0x0/0x7c @ 1
[ 0.395457] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.395459] initcall init_profile_hash+0x0/0x7c returned 0 after 1 usecs
[ 0.395461] calling integrity_fs_init+0x0/0x49 @ 1
[ 0.395469] initcall integrity_fs_init+0x0/0x49 returned 0 after 5 usecs
[ 0.395471] calling load_uefi_certs+0x0/0x2fe @ 1
[ 0.395614] integrity: Loading X.509 certificate: UEFI:db
[ 0.395640] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.395641] integrity: Loading X.509 certificate: UEFI:db
[ 0.395661] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.395739] initcall load_uefi_certs+0x0/0x2fe returned 0 after 259 usecs
[ 0.395741] calling lockdown_lift_sysrq+0x0/0x2d @ 1
[ 0.395743] initcall lockdown_lift_sysrq+0x0/0x2d returned 0 after 0 usecs
[ 0.395745] calling prandom_reseed+0x0/0x2a @ 1
[ 0.395749] initcall prandom_reseed+0x0/0x2a returned 0 after 3 usecs
[ 0.395750] calling init_error_injection+0x0/0x6a @ 1
[ 0.395954] initcall init_error_injection+0x0/0x6a returned 0 after 197 usecs
[ 0.395955] calling pci_resource_alignment_sysfs_init+0x0/0x18 @ 1
[ 0.395959] initcall pci_resource_alignment_sysfs_init+0x0/0x18 returned 0 after 1 usecs
[ 0.395960] calling pci_sysfs_init+0x0/0x50 @ 1
[ 0.396181] initcall pci_sysfs_init+0x0/0x50 returned 0 after 214 usecs
[ 0.396183] calling bert_init+0x0/0x215 @ 1
[ 0.396186] initcall bert_init+0x0/0x215 returned 0 after 0 usecs
[ 0.396188] calling clk_debug_init+0x0/0x116 @ 1
[ 0.396195] initcall clk_debug_init+0x0/0x116 returned 0 after 5 usecs
[ 0.396197] calling boot_wait_for_devices+0x0/0x29 @ 1
[ 0.396199] initcall boot_wait_for_devices+0x0/0x29 returned -19 after 0 usecs
[ 0.396200] calling dmar_free_unused_resources+0x0/0xc5 @ 1
[ 0.396202] initcall dmar_free_unused_resources+0x0/0xc5 returned 0 after 0 usecs
[ 0.396204] calling deferred_probe_initcall+0x0/0x90 @ 1
[ 0.396222] initcall deferred_probe_initcall+0x0/0x90 returned 0 after 15 usecs
[ 0.396223] calling genpd_power_off_unused+0x0/0x7e @ 1
[ 0.396226] initcall genpd_power_off_unused+0x0/0x7e returned 0 after 0 usecs
[ 0.396227] calling genpd_debug_init+0x0/0x16b @ 1
[ 0.396231] initcall genpd_debug_init+0x0/0x16b returned 0 after 2 usecs
[ 0.396233] calling rtc_hctosys+0x0/0xdc @ 1
[ 0.396281] rtc_cmos 00:01: setting system clock to 2019-08-10T08:23:11 UTC (1565425391)
[ 0.396283] initcall rtc_hctosys+0x0/0xdc returned 0 after 47 usecs
[ 0.396285] calling firmware_memmap_init+0x0/0x33 @ 1
[ 0.396324] initcall firmware_memmap_init+0x0/0x33 returned 0 after 36 usecs
[ 0.396326] calling register_update_efi_random_seed+0x0/0x20 @ 1
[ 0.396328] initcall register_update_efi_random_seed+0x0/0x20 returned 0 after 0 usecs
[ 0.396329] calling efi_shutdown_init+0x0/0x3c @ 1
[ 0.396330] initcall efi_shutdown_init+0x0/0x3c returned 0 after 0 usecs
[ 0.396332] calling pci_mmcfg_late_insert_resources+0x0/0x51 @ 1
[ 0.396337] initcall pci_mmcfg_late_insert_resources+0x0/0x51 returned 0 after 2 usecs
[ 0.396339] calling tcp_congestion_default+0x0/0x18 @ 1
[ 0.396341] initcall tcp_congestion_default+0x0/0x18 returned 0 after 0 usecs
[ 0.396343] calling software_resume+0x0/0x210 @ 1
[ 0.396345] initcall software_resume+0x0/0x210 returned -2 after 0 usecs
[ 0.396347] calling clear_boot_tracer+0x0/0x26 @ 1
[ 0.396349] initcall clear_boot_tracer+0x0/0x26 returned 0 after 0 usecs
[ 0.396350] calling tracing_set_default_clock+0x0/0x35 @ 1
[ 0.396352] initcall tracing_set_default_clock+0x0/0x35 returned 0 after 0 usecs
[ 0.396354] calling acpi_gpio_handle_deferred_request_irqs+0x0/0x90 @ 1
[ 0.396356] initcall acpi_gpio_handle_deferred_request_irqs+0x0/0x90 returned 0 after 0 usecs
[ 0.396358] calling clk_disable_unused+0x0/0x160 @ 1
[ 0.396360] initcall clk_disable_unused+0x0/0x160 returned 0 after 0 usecs
[ 0.396361] calling regulator_init_complete+0x0/0x36 @ 1
[ 0.396364] initcall regulator_init_complete+0x0/0x36 returned 0 after 1 usecs
[ 0.397615] Freeing unused kernel image memory: 1640K
[ 0.429753] Write protecting the kernel read-only data: 16384k
[ 0.430823] Freeing unused kernel image memory: 2036K
[ 0.431216] Freeing unused kernel image memory: 696K
[ 0.445461] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.445463] x86/mm: Checking user space page tables
[ 0.451285] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.451286] Run /init as init process
[ 0.518184] calling acpi_fan_driver_init+0x0/0x1000 [fan] @ 130
[ 0.518349] probe of PNP0C0B:00 returned 1 after 148 usecs
[ 0.518450] probe of PNP0C0B:01 returned 1 after 98 usecs
[ 0.518518] probe of PNP0C0B:02 returned 1 after 66 usecs
[ 0.518625] probe of PNP0C0B:03 returned 1 after 104 usecs
[ 0.518756] probe of PNP0C0B:04 returned 1 after 128 usecs
[ 0.518771] initcall acpi_fan_driver_init+0x0/0x1000 [fan] returned 0 after 570 usecs
[ 0.522864] calling serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 137
[ 0.522875] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 8 usecs
[ 0.527442] calling evdev_init+0x0/0x1000 [evdev] @ 129
[ 0.527484] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 36 usecs
[ 0.530494] calling cryptd_init+0x0/0x1000 [cryptd] @ 128
[ 0.530497] cryptd: max_cpu_qlen set to 1000
[ 0.530499] initcall cryptd_init+0x0/0x1000 [cryptd] returned 0 after 2 usecs
[ 0.532252] calling psmouse_init+0x0/0x85 [psmouse] @ 127
[ 0.532281] initcall psmouse_init+0x0/0x85 [psmouse] returned 0 after 22 usecs
[ 0.533928] calling aes_init+0x0/0x1000 [aes_x86_64] @ 128
[ 0.533966] calling init_scsi+0x0/0x7a [scsi_mod] @ 130
[ 0.534028] SCSI subsystem initialized
[ 0.534037] initcall init_scsi+0x0/0x7a [scsi_mod] returned 0 after 60 usecs
[ 0.536197] initcall aes_init+0x0/0x1000 [aes_x86_64] returned 0 after 2173 usecs
[ 0.547433] calling aesni_init+0x0/0x1000 [aesni_intel] @ 136
[ 0.547435] AVX2 version of gcm_enc/dec engaged.
[ 0.547435] AES CTR mode by8 optimization enabled
[ 0.549139] calling ata_init+0x0/0x31e [libata] @ 130
[ 0.549260] libata version 3.00 loaded.
[ 0.549274] initcall ata_init+0x0/0x31e [libata] returned 0 after 119 usecs
[ 0.557420] calling ahci_pci_driver_init+0x0/0x1000 [ahci] @ 130
[ 0.557455] ahci 0000:00:1f.2: version 3.0
[ 0.557627] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.569680] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl RAID mode
[ 0.569682] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso sadm sds apst
[ 0.569999] scsi host0: ahci
[ 0.570223] scsi host1: ahci
[ 0.570288] ata1: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241100 irq 44
[ 0.570289] ata2: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241180 irq 44
[ 0.570303] probe of 0000:00:1f.2 returned 1 after 12863 usecs
[ 0.570323] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 12593 usecs
[ 0.577325] initcall aesni_init+0x0/0x1000 [aesni_intel] returned 0 after 19429 usecs
[ 0.578249] calling crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] @ 137
[ 0.579403] initcall crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] returned 0 after 1123 usecs
[ 0.885748] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.201767] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.204242] ata2.00: NCQ Send/Recv Log not supported
[ 1.204246] ata2.00: ATA-9: SAMSUNG SSD PM851 mSATA 256GB, EXT4AD0Q, max UDMA/133
[ 1.204250] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.205399] ata2.00: NCQ Send/Recv Log not supported
[ 1.205491] ata2.00: configured for UDMA/133
[ 1.205800] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 AD0Q PQ: 0 ANSI: 5
[ 1.216409] calling init_sd+0x0/0x1000 [sd_mod] @ 148
[ 1.216569] probe of 1:0:0:0 returned 1 after 111 usecs
[ 1.216582] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 163 usecs
[ 1.216695] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.216704] sd 1:0:0:0: [sda] Write Protect is off
[ 1.216706] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.216718] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.218343] sda: sda1 sda2 sda3
[ 1.218795] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.389744] tsc: Refined TSC clocksource calibration: 2593.993 MHz
[ 1.389761] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256411d258c, max_idle_ns: 440795337342 ns
[ 1.389816] clocksource: Switched to clocksource tsc
[ 1.493635] calling dm_init+0x0/0x4d [dm_mod] @ 198
[ 1.493674] device-mapper: uevent: version 1.0.3
[ 1.493740] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 1.493751] initcall dm_init+0x0/0x4d [dm_mod] returned 0 after 103 usecs
[ 1.495271] calling dm_crypt_init+0x0/0x1000 [dm_crypt] @ 198
[ 1.495273] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 0 usecs
[ 1.617385] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 1.620206] probe of serio1 returned 1 after 1087915 usecs
[ 3.836800] calling af_alg_init+0x0/0x1000 [af_alg] @ 212
[ 3.836801] NET: Registered protocol family 38
[ 3.836803] initcall af_alg_init+0x0/0x1000 [af_alg] returned 0 after 1 usecs
[ 3.838482] calling algif_skcipher_init+0x0/0x1000 [algif_skcipher] @ 213
[ 3.838485] initcall algif_skcipher_init+0x0/0x1000 [algif_skcipher] returned 0 after 0 usecs
[ 4.075750] calling crc32c_mod_init+0x0/0x1000 [crc32c_generic] @ 250
[ 4.079974] initcall crc32c_mod_init+0x0/0x1000 [crc32c_generic] returned 0 after 4117 usecs
[ 4.085903] calling journal_init+0x0/0x528 [jbd2] @ 250
[ 4.085995] initcall journal_init+0x0/0x528 [jbd2] returned 0 after 83 usecs
[ 4.086818] calling mbcache_init+0x0/0x1000 [mbcache] @ 250
[ 4.086847] initcall mbcache_init+0x0/0x1000 [mbcache] returned 0 after 25 usecs
[ 4.110733] calling ext4_init_fs+0x0/0x1a4 [ext4] @ 250
[ 4.110836] initcall ext4_init_fs+0x0/0x1a4 [ext4] returned 0 after 84 usecs
[ 4.113857] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.136946] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 4.256010] calling init_autofs_fs+0x0/0x26 [autofs4] @ 1
[ 4.256060] initcall init_autofs_fs+0x0/0x26 [autofs4] returned 0 after 43 usecs
[ 4.256113] systemd[1]: Inserted module 'autofs4'
[ 4.261748] calling xt_init+0x0/0x1000 [x_tables] @ 1
[ 4.261755] initcall xt_init+0x0/0x1000 [x_tables] returned 0 after 1 usecs
[ 4.264155] calling ip_tables_init+0x0/0x1000 [ip_tables] @ 1
[ 4.264165] initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 5 usecs
[ 4.273286] calling efivarfs_init+0x0/0x1000 [efivarfs] @ 270
[ 4.273290] initcall efivarfs_init+0x0/0x1000 [efivarfs] returned 0 after 1 usecs
[ 4.280851] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 4.297934] systemd[1]: Detected architecture x86-64.
[ 4.298266] systemd[1]: Set hostname to <ersatz>.
[ 4.298916] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 4.389170] systemd[1]: /lib/systemd/system/pcscd.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
[ 4.417336] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 4.420779] systemd[1]: Reached target User and Group Name Lookups.
[ 4.421034] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.421047] systemd[1]: Reached target Remote File Systems.
[ 4.421060] systemd[1]: Reached target Swap.
[ 4.446320] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 4.597498] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 308
[ 4.597501] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 4.598662] calling acpi_pad_init+0x0/0x1000 [acpi_pad] @ 321
[ 4.598732] probe of ACPI000C:00 returned 1 after 22 usecs
[ 4.598752] initcall acpi_pad_init+0x0/0x1000 [acpi_pad] returned 0 after 84 usecs
[ 4.599121] calling acpi_button_driver_init+0x0/0x1000 [button] @ 315
[ 4.599213] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 4.600997] ACPI: Lid Switch [LID0]
[ 4.601005] probe of PNP0C0D:00 returned 1 after 1838 usecs
[ 4.601031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 4.601412] calling rfkill_init+0x0/0x111 [rfkill] @ 306
[ 4.601491] initcall rfkill_init+0x0/0x111 [rfkill] returned 0 after 71 usecs
[ 4.601491] ACPI: Power Button [PBTN]
[ 4.601506] probe of PNP0C0C:00 returned 1 after 498 usecs
[ 4.601542] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 4.601608] ACPI: Sleep Button [SBTN]
[ 4.601619] probe of PNP0C0E:00 returned 1 after 110 usecs
[ 4.601666] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.601720] ACPI: Power Button [PWRF]
[ 4.601733] probe of LNXPWRBN:00 returned 1 after 103 usecs
[ 4.601743] initcall acpi_button_driver_init+0x0/0x1000 [button] returned 0 after 319 usecs
[ 4.603727] calling rbtn_driver_init+0x0/0x1000 [dell_rbtn] @ 306
[ 4.603846] input: DELL Wireless hotkeys as /devices/virtual/input/input7
[ 4.604137] probe of DELLABCE:00 returned 1 after 358 usecs
[ 4.604157] initcall rbtn_driver_init+0x0/0x1000 [dell_rbtn] returned 0 after 416 usecs
[ 4.608486] calling int3400_thermal_driver_init+0x0/0x1000 [int3400_thermal] @ 316
[ 4.610602] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20190509/nspredef-263)
[ 4.610607] ACPI: Invalid package element [0]: got number, expecting [R]
[ 4.610608] _ART package 0 is invalid, ignored
[ 4.610706] probe of INT3400:00 returned 1 after 2202 usecs
[ 4.610725] initcall int3400_thermal_driver_init+0x0/0x1000 [int3400_thermal] returned 0 after 2182 usecs
[ 4.641801] calling int3402_thermal_driver_init+0x0/0x1000 [int3402_thermal] @ 315
[ 4.642027] calling acpi_ac_init+0x0/0xfdc [ac] @ 319
[ 4.642326] calling acpi_video_init+0x0/0x1000 [video] @ 311
[ 4.642337] initcall acpi_video_init+0x0/0x1000 [video] returned 0 after 6 usecs
[ 4.642559] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 323
[ 4.642562] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 4.643618] calling pcc_cpufreq_init+0x0/0xe89 [pcc_cpufreq] @ 308
[ 4.643621] initcall pcc_cpufreq_init+0x0/0xe89 [pcc_cpufreq] returned 0 after 0 usecs
[ 4.644165] ACPI: AC Adapter [AC] (off-line)
[ 4.644177] probe of ACPI0003:00 returned 1 after 2024 usecs
[ 4.644194] initcall acpi_ac_init+0x0/0xfdc [ac] returned 0 after 559 usecs
[ 4.645286] probe of INT3402:00 returned 1 after 3471 usecs
[ 4.645311] initcall int3402_thermal_driver_init+0x0/0x1000 [int3402_thermal] returned 0 after 1649 usecs
[ 4.651799] calling int3403_driver_init+0x0/0x1000 [int3403_thermal] @ 324
[ 4.653875] calling parport_default_proc_register+0x0/0x1000 [parport] @ 304
[ 4.653893] initcall parport_default_proc_register+0x0/0x1000 [parport] returned 0 after 12 usecs
[ 4.666830] probe of INT3403:00 returned 1 after 15018 usecs
[ 4.669271] probe of INT3403:01 returned 1 after 2435 usecs
[ 4.669301] initcall int3403_driver_init+0x0/0x1000 [int3403_thermal] returned 0 after 15058 usecs
[ 4.690175] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 325
[ 4.690178] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 4.690342] calling parport_pc_init+0x0/0xf25 [parport_pc] @ 304
[ 4.690390] parport_pc 00:05: [io 0x0378-0x037b]
[ 4.692346] parport_pc 00:05: [irq 5]
[ 4.694440] calling acpi_wmi_init+0x0/0x1000 [wmi] @ 316
[ 4.694765] calling acpi_battery_init+0x0/0xf5a [battery] @ 307
[ 4.694772] initcall acpi_battery_init+0x0/0xf5a [battery] returned 0 after 3 usecs
[ 4.698012] calling hwrng_modinit+0x0/0x1000 [rng_core] @ 319
[ 4.698316] initcall hwrng_modinit+0x0/0x1000 [rng_core] returned 0 after 292 usecs
[ 4.699212] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 4.699288] probe of PNP0C14:00 returned 1 after 4818 usecs
[ 4.699319] initcall acpi_wmi_init+0x0/0x1000 [wmi] returned 0 after 1271 usecs
[ 4.706482] calling tpm_init+0x0/0xfd7 [tpm] @ 319
[ 4.707362] calling ledtrig_usb_init+0x0/0x1000 [usb_common] @ 311
[ 4.707367] initcall ledtrig_usb_init+0x0/0x1000 [usb_common] returned 0 after 2 usecs
[ 4.708480] initcall tpm_init+0x0/0xfd7 [tpm] returned 0 after 1085 usecs
[ 4.713861] calling init_soundcore+0x0/0x1000 [soundcore] @ 310
[ 4.713869] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 5 usecs
[ 4.716362] calling lpc_ich_driver_init+0x0/0x1000 [lpc_ich] @ 308
[ 4.716463] probe of 0000:00:1f.0 returned 1 after 84 usecs
[ 4.716477] initcall lpc_ich_driver_init+0x0/0x1000 [lpc_ich] returned 0 after 108 usecs
[ 4.720768] calling alsa_sound_init+0x0/0x82 [snd] @ 310
[ 4.720784] initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 10 usecs
[ 4.723843] calling i2c_i801_init+0x0/0x1000 [i2c_i801] @ 306
[ 4.724011] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 4.724037] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.724357] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 321
[ 4.736752] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 12097 usecs
[ 4.772801] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 317
[ 4.772804] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 4.777334] calling init_tis+0x0/0x1000 [tpm_tis] @ 319
[ 4.778027] calling proc_thermal_init+0x0/0x1000 [processor_thermal_device] @ 309
[ 4.778063] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 4.781529] tpm_tis 00:08: 1.2 TPM (device-id 0x3205, rev-id 80)
[ 4.781768] parport_pc 00:05: activated
[ 4.781771] parport_pc 00:05: reported by Plug and Play ACPI
[ 4.781856] probe of 00:05 returned 0 after 91475 usecs
[ 4.781891] probe of parport_pc.956 returned 1 after 9 usecs
[ 4.781962] probe of parport_pc.888 returned 1 after 5 usecs
[ 4.782060] probe of parport_pc.632 returned 1 after 5 usecs
[ 4.782125] initcall parport_pc_init+0x0/0xf25 [parport_pc] returned 0 after 3997 usecs
[ 4.782812] calling init_sg+0x0/0x1000 [sg] @ 305
[ 4.784292] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.784297] initcall init_sg+0x0/0x1000 [sg] returned 0 after 1445 usecs
[ 4.784552] calling mei_init+0x0/0xac [mei] @ 303
[ 4.784569] initcall mei_init+0x0/0xac [mei] returned 0 after 11 usecs
[ 4.792713] calling mmc_init+0x0/0x70f [mmc_core] @ 314
[ 4.792742] initcall mmc_init+0x0/0x70f [mmc_core] returned 0 after 19 usecs
[ 4.792933] calling init_module+0x0/0x2f [efivars] @ 322
[ 4.792934] EFI Variables Facility v0.08 2004-May-17
[ 4.794630] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 321
[ 4.794642] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 4 usecs
[ 4.795025] calling drm_core_init+0x0/0xc8 [drm] @ 315
[ 4.795055] initcall drm_core_init+0x0/0xc8 [drm] returned 0 after 12 usecs
[ 4.795513] initcall init_module+0x0/0x2f [efivars] returned 0 after 471 usecs
[ 4.807171] probe of 00:08 returned 1 after 29796 usecs
[ 4.807184] initcall init_tis+0x0/0x1000 [tpm_tis] returned 0 after 11867 usecs
[ 4.810504] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 4.810527] probe of 0000:00:04.0 returned 1 after 32472 usecs
[ 4.810550] initcall proc_thermal_init+0x0/0x1000 [processor_thermal_device] returned 0 after 15154 usecs
[ 4.823239] calling usb_init+0x0/0x141 [usbcore] @ 316
[ 4.823247] ACPI: bus type USB registered
[ 4.823269] usbcore: registered new interface driver usbfs
[ 4.823277] usbcore: registered new interface driver hub
[ 4.823323] usbcore: registered new device driver usb
[ 4.823336] initcall usb_init+0x0/0x141 [usbcore] returned 0 after 82 usecs
[ 4.823385] calling joydev_init+0x0/0x1000 [joydev] @ 325
[ 4.823391] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after 2 usecs
[ 4.825052] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 313
[ 4.825055] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 4.825271] calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 321
[ 4.825278] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 3 usecs
[ 4.829435] calling cfg80211_init+0x0/0xc6 [cfg80211] @ 323
[ 4.829984] calling sdhci_drv_init+0x0/0x1000 [sdhci] @ 314
[ 4.829985] sdhci: Secure Digital Host Controller Interface driver
[ 4.829985] sdhci: Copyright(c) Pierre Ossman
[ 4.829989] initcall sdhci_drv_init+0x0/0x1000 [sdhci] returned 0 after 1 usecs
[ 4.830174] initcall cfg80211_init+0x0/0xc6 [cfg80211] returned 0 after 165 usecs
[ 4.838556] calling e1000_init_module+0x0/0x1000 [e1000e] @ 324
[ 4.838558] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 4.838558] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.838579] e1000e 0000:00:19.0: enabling device (0000 -> 0002)
[ 4.838748] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.843720] calling mei_me_driver_init+0x0/0x1000 [mei_me] @ 303
[ 4.844482] calling ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 311
[ 4.844483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.844496] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 9 usecs
[ 4.848174] calling ehci_pci_init+0x0/0x1000 [ehci_pci] @ 311
[ 4.848175] ehci-pci: EHCI PCI platform driver
[ 4.848433] calling efivars_pstore_init+0x0/0x1000 [efi_pstore] @ 322
[ 4.848471] pstore: Using crash dump compression: deflate
[ 4.848478] pstore: Registered efi as persistent store backend
[ 4.848481] initcall efivars_pstore_init+0x0/0x1000 [efi_pstore] returned 0 after 44 usecs
[ 4.849152] initcall mei_me_driver_init+0x0/0x1000 [mei_me] returned 0 after 696 usecs
[ 4.850240] calling pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] @ 304
[ 4.850307] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 4.850362] calling hda_bus_init+0x0/0x11 [snd_hda_core] @ 321
[ 4.850380] initcall hda_bus_init+0x0/0x11 [snd_hda_core] returned 0 after 12 usecs
[ 4.850427] calling xhci_hcd_init+0x0/0x1f [xhci_hcd] @ 316
[ 4.850439] initcall xhci_hcd_init+0x0/0x1f [xhci_hcd] returned 0 after 4 usecs
[ 4.850621] probe of pcspkr returned 1 after 361 usecs
[ 4.850636] initcall pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] returned 0 after 200 usecs
[ 4.858619] calling iwl_drv_init+0x0/0x1000 [iwlwifi] @ 323
[ 4.858621] Intel(R) Wireless WiFi driver for Linux
[ 4.858621] Copyright(c) 2003- 2015 Intel Corporation
[ 4.859027] probe of 0000:00:16.0 returned 1 after 15289 usecs
[ 4.860640] calling xhci_pci_init+0x0/0x1000 [xhci_pci] @ 316
[ 4.864920] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 4.871862] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.871871] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.871884] ehci-pci 0000:00:1d.0: debug port 2
[ 4.875798] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.876433] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7242000
[ 4.881989] probe of 0000:02:00.0 returned 1 after 17273 usecs
[ 4.882019] initcall iwl_drv_init+0x0/0x1000 [iwlwifi] returned 0 after 20862 usecs
[ 4.885576] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode
[ 4.885809] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 4.888586] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 4.888607] probe of PNP0C0A:00 returned 1 after 193744 usecs
[ 4.889667] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.890395] calling sdhci_driver_init+0x0/0x1000 [sdhci_pci] @ 314
[ 4.890420] sdhci-pci 0000:01:00.0: SDHCI controller found [1217:8520] (rev 1)
[ 4.892268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 4.892269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.892271] usb usb1: Product: EHCI Host Controller
[ 4.892272] usb usb1: Manufacturer: Linux 5.2.0-2-amd64 ehci_hcd
[ 4.892273] usb usb1: SerialNumber: 0000:00:1d.0
[ 4.895828] calling rapl_pmu_init+0x0/0x1000 [intel_rapl_perf] @ 317
[ 4.895990] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 4.895991] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.895992] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.895992] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.895993] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.895997] initcall rapl_pmu_init+0x0/0x1000 [intel_rapl_perf] returned 0 after 160 usecs
[ 4.896625] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 312
[ 4.896628] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 4.896722] hub 1-0:1.0: USB hub found
[ 4.896733] hub 1-0:1.0: 2 ports detected
[ 4.896835] probe of 1-0:1.0 returned 1 after 118 usecs
[ 4.896853] probe of usb1 returned 1 after 179 usecs
[ 4.896879] probe of 0000:00:1d.0 returned 1 after 48691 usecs
[ 4.896900] initcall ehci_pci_init+0x0/0x1000 [ehci_pci] returned 0 after 263 usecs
[ 4.897038] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.897045] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.898099] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 4.898105] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 4.898419] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 4.898420] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.898422] usb usb2: Product: xHCI Host Controller
[ 4.898423] usb usb2: Manufacturer: Linux 5.2.0-2-amd64 xhci-hcd
[ 4.898424] usb usb2: SerialNumber: 0000:00:14.0
[ 4.903007] hub 2-0:1.0: USB hub found
[ 4.903022] hub 2-0:1.0: 11 ports detected
[ 4.907502] calling intel_uncore_init+0x0/0xe4a [intel_uncore] @ 308
[ 4.908205] calling azx_driver_init+0x0/0xfd8 [snd_hda_intel] @ 310
[ 4.908226] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 4.908247] probe of 0000:00:00.0 returned 1 after 726 usecs
[ 4.908418] calling drm_kms_helper_init+0x0/0x14 [drm_kms_helper] @ 315
[ 4.908437] initcall drm_kms_helper_init+0x0/0x14 [drm_kms_helper] returned 0 after 6 usecs
[ 4.911196] mmc0: SDHCI controller on PCI [0000:01:00.0] using ADMA
[ 4.911208] probe of 0000:01:00.0 returned 1 after 20796 usecs
[ 4.911224] initcall sdhci_driver_init+0x0/0x1000 [sdhci_pci] returned 0 after 2734 usecs
[ 4.914243] probe of 0000:00:03.0 returned 1 after 6031 usecs
[ 4.914271] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 4.914348] initcall intel_uncore_init+0x0/0xe4a [intel_uncore] returned 0 after 5777 usecs
[ 4.914786] probe of 0000:00:1b.0 returned 1 after 536 usecs
[ 4.914812] initcall azx_driver_init+0x0/0xfd8 [snd_hda_intel] returned 0 after 6236 usecs
[ 4.916266] probe of 0000:00:1f.3 returned 1 after 192410 usecs
[ 4.916285] initcall i2c_i801_init+0x0/0x1000 [i2c_i801] returned 0 after 7677 usecs
[ 4.917489] probe of 2-0:1.0 returned 1 after 14487 usecs
[ 4.917512] probe of usb2 returned 1 after 14552 usecs
[ 4.917552] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.917557] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 4.917561] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 4.917619] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[ 4.917620] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.917622] usb usb3: Product: xHCI Host Controller
[ 4.917623] usb usb3: Manufacturer: Linux 5.2.0-2-amd64 xhci-hcd
[ 4.917624] usb usb3: SerialNumber: 0000:00:14.0
[ 4.918637] calling cstate_pmu_init+0x0/0xf56 [intel_cstate] @ 308
[ 4.918736] hub 3-0:1.0: USB hub found
[ 4.918748] hub 3-0:1.0: 4 ports detected
[ 4.923648] probe of 3-0:1.0 returned 1 after 4918 usecs
[ 4.923677] probe of usb3 returned 1 after 4987 usecs
[ 4.923705] probe of 0000:00:14.0 returned 1 after 63056 usecs
[ 4.923728] initcall xhci_pci_init+0x0/0x1000 [xhci_pci] returned 0 after 4966 usecs
[ 5.002598] initcall cstate_pmu_init+0x0/0xf56 [intel_cstate] returned 0 after 81986 usecs
[ 5.010406] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 326
[ 5.010410] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 5.016607] calling ledtrig_audio_init+0x0/0x1000 [ledtrig_audio] @ 343
[ 5.016614] initcall ledtrig_audio_init+0x0/0x1000 [ledtrig_audio] returned 0 after 4 usecs
[ 5.017310] calling ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] @ 318
[ 5.034028] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 343
[ 5.034044] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 11 usecs
[ 5.036099] calling i8k_init+0x0/0x1000 [dell_smm_hwmon] @ 313
[ 5.064175] initcall i8k_init+0x0/0x1000 [dell_smm_hwmon] returned 0 after 27411 usecs
[ 5.066208] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 320
[ 5.066212] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 5.066757] calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 343
[ 5.067467] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 5.067470] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 5.067471] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 5.067472] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 5.067473] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 5.067476] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x18
[ 5.067477] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
[ 5.067478] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a
[ 5.067480] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x13
[ 5.070075] calling i915_init+0x0/0x62 [i915] @ 340
[ 5.070564] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 5.070565] fb0: switching to inteldrmfb from EFI VGA
[ 5.070579] Console: switching to colour dummy device 80x25
[ 5.071224] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 5.071784] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead
[ 5.073038] calling ieee80211_init+0x0/0x25 [mac80211] @ 336
[ 5.073072] initcall ieee80211_init+0x0/0x25 [mac80211] returned 0 after 7 usecs
[ 5.073176] calling dcdbas_init+0x0/0x1000 [dcdbas] @ 313
[ 5.073234] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 5.073239] probe of dcdbas returned 1 after 12 usecs
[ 5.073242] initcall dcdbas_init+0x0/0x1000 [dcdbas] returned 0 after 62 usecs
[ 5.073668] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.073669] [drm] Driver supports precise vblank timestamp query.
[ 5.073949] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.074386] calling dell_wmi_descriptor_driver_init+0x0/0x1000 [dell_wmi_descriptor] @ 313
[ 5.074722] initcall ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] returned 0 after 322 usecs
[ 5.077506] probe of 8D9DDCBC-A997-11DA-B012-B622A1EF5492 returned 1 after 3113 usecs
[ 5.077527] initcall dell_wmi_descriptor_driver_init+0x0/0x1000 [dell_wmi_descriptor] returned 0 after 3061 usecs
[ 5.077548] calling crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] @ 319
[ 5.079979] calling dell_smbios_init+0x0/0xf6f [dell_smbios] @ 313
[ 5.080067] probe of dell-smbios.0 returned 1 after 13 usecs
[ 5.081535] probe of A80593CE-A997-11DA-B012-B622A1EF5492 returned 1 after 1445 usecs
[ 5.081613] probe of dell-smbios.1 returned 1 after 12 usecs
[ 5.082341] initcall dell_smbios_init+0x0/0xf6f [dell_smbios] returned 0 after 2299 usecs
[ 5.085454] initcall crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] returned 0 after 5338 usecs
[ 5.088455] calling crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] @ 319
[ 5.090291] calling dell_init+0x0/0xc43 [dell_laptop] @ 313
[ 5.090383] probe of dell-laptop returned 1 after 31 usecs
[ 5.117012] probe of hdaudioC1D0 returned 1 after 50244 usecs
[ 5.117033] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 26107 usecs
[ 5.122383] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
[ 5.126107] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.128826] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 5.129134] probe of LNXVIDEO:00 returned 1 after 5194 usecs
[ 5.129244] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.129267] probe of 0000:00:02.0 returned 1 after 59050 usecs
[ 5.129320] initcall i915_init+0x0/0x62 [i915] returned 0 after 38083 usecs
[ 5.130930] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 5.130988] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 5.131040] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 5.131089] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 5.133590] calling iwl_mvm_init+0x0/0x1000 [iwlmvm] @ 336
[ 5.133607] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 5.133896] fbcon: i915drmfb (fb0) is primary device
[ 5.142576] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 5.148309] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 5.149762] dell_laptop: Using i8042 filter function for receiving events
[ 5.162957] calling ppdev_init+0x0/0x1000 [ppdev] @ 303
[ 5.163382] iwlwifi 0000:02:00.0: base HW address: 34:02:86:45:19:33
[ 5.170305] initcall crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] returned 0 after 7169 usecs
[ 5.170955] ppdev: user-space parallel port driver
[ 5.170961] initcall ppdev_init+0x0/0x1000 [ppdev] returned 0 after 7811 usecs
[ 5.192248] calling dell_wmi_init+0x0/0xfee [dell_wmi] @ 326
[ 5.193607] calling wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] @ 323
[ 5.207252] calling watchdog_init+0x0/0x91 [watchdog] @ 316
[ 5.221081] initcall watchdog_init+0x0/0x91 [watchdog] returned 0 after 13497 usecs
[ 5.223323] calling iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] @ 316
[ 5.223324] iTCO_vendor_support: vendor-support=0
[ 5.223328] initcall iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] returned 0 after 1 usecs
[ 5.231494] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 5.237597] probe of 05901221-D566-11D1-B2F0-00A0C9062910 returned 1 after 43981 usecs
[ 5.237614] initcall wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] returned 0 after 13950 usecs
[ 5.237803] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14
[ 5.239293] probe of 9DBB5994-A997-11DA-B012-B622A1EF5492 returned 1 after 47034 usecs
[ 5.239311] initcall dell_wmi_init+0x0/0xfee [dell_wmi] returned 0 after 15607 usecs
[ 5.240184] calling iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] @ 316
[ 5.240185] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.240232] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 5.243067] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:e6:d7:6a:72:f4
[ 5.243069] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 5.243097] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 5.243113] probe of 0000:00:19.0 returned 1 after 404544 usecs
[ 5.243139] initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 2875 usecs
[ 5.257160] initcall dell_init+0x0/0xc43 [dell_laptop] returned 0 after 16570 usecs
[ 5.276244] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.276255] probe of iTCO_wdt.0.auto returned 1 after 36048 usecs
[ 5.276275] initcall iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] returned 0 after 35239 usecs
[ 5.278376] calling mei_wdt_driver_init+0x0/0x1000 [mei_wdt] @ 303
[ 5.283797] probe of mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02 returned 1 after 5412 usecs
[ 5.283818] initcall mei_wdt_driver_init+0x0/0x1000 [mei_wdt] returned 0 after 5308 usecs
[ 5.301544] calling vmx_init+0x0/0xda [kvm_intel] @ 318
[ 5.308878] calling arc4_init+0x0/0x1000 [arc4] @ 380
[ 5.308992] initcall vmx_init+0x0/0xda [kvm_intel] returned 0 after 101 usecs
[ 5.315178] calling coretemp_init+0x0/0x1000 [coretemp] @ 318
[ 5.315442] probe of coretemp.0 returned 1 after 27 usecs
[ 5.316983] initcall coretemp_init+0x0/0x1000 [coretemp] returned 0 after 1754 usecs
[ 5.318985] calling powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 318
[ 5.319033] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp] returned 0 after 42 usecs
[ 5.320733] calling pkg_temp_thermal_init+0x0/0x1000 [x86_pkg_temp_thermal] @ 318
[ 5.322351] initcall pkg_temp_thermal_init+0x0/0x1000 [x86_pkg_temp_thermal] returned 0 after 1574 usecs
[ 5.323921] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 318
[ 5.323924] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 5.328387] initcall arc4_init+0x0/0x1000 [arc4] returned 0 after 4354 usecs
[ 5.340857] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 5.341092] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 5.341106] initcall iwl_mvm_init+0x0/0x1000 [iwlmvm] returned 0 after 16770 usecs
[ 5.348888] systemd-journald[294]: Received client request to flush runtime journal.
[ 5.369422] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 5.370772] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[ 5.370773] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled)
[ 5.378332] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 317
[ 5.378336] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 5.385977] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 5.385979] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.386130] hub 1-1:1.0: USB hub found
[ 5.386223] hub 1-1:1.0: 8 ports detected
[ 5.391924] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.395115] probe of 1-1:1.0 returned 1 after 8989 usecs
[ 5.395144] probe of 1-1 returned 1 after 9083 usecs
[ 5.414024] calling rapl_init+0x0/0x1000 [intel_rapl] @ 318
[ 5.414053] intel_rapl: Found RAPL domain package
[ 5.414055] intel_rapl: Found RAPL domain core
[ 5.414056] intel_rapl: Found RAPL domain uncore
[ 5.414059] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 5.417870] calling init_fat_fs+0x0/0xfcb [fat] @ 390
[ 5.417927] initcall init_fat_fs+0x0/0xfcb [fat] returned 0 after 50 usecs
[ 5.418264] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 319
[ 5.418267] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 5.420081] initcall rapl_init+0x0/0x1000 [intel_rapl] returned 0 after 1766 usecs
[ 5.427026] calling init_vfat_fs+0x0/0x1000 [vfat] @ 390
[ 5.427032] initcall init_vfat_fs+0x0/0x1000 [vfat] returned 0 after 2 usecs
[ 5.469948] calling init_nls_cp437+0x0/0x1000 [nls_cp437] @ 402
[ 5.469953] initcall init_nls_cp437+0x0/0x1000 [nls_cp437] returned 0 after 0 usecs
[ 5.470379] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 308
[ 5.470384] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 5.475348] calling init_nls_ascii+0x0/0x1000 [nls_ascii] @ 403
[ 5.475355] initcall init_nls_ascii+0x0/0x1000 [nls_ascii] returned 0 after 0 usecs
[ 5.524126] calling init_misc_binfmt+0x0/0x1000 [binfmt_misc] @ 407
[ 5.524137] initcall init_misc_binfmt+0x0/0x1000 [binfmt_misc] returned 0 after 4 usecs
[ 5.689713] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 5.762400] audit: type=1400 audit(1565425396.861:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=415 comm="apparmor_parser"
[ 5.762404] audit: type=1400 audit(1565425396.861:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=415 comm="apparmor_parser"
[ 5.762408] audit: type=1400 audit(1565425396.861:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=415 comm="apparmor_parser"
[ 5.773508] audit: type=1400 audit(1565425396.869:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=414 comm="apparmor_parser"
[ 5.783542] audit: type=1400 audit(1565425396.881:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=418 comm="apparmor_parser"
[ 5.784820] audit: type=1400 audit(1565425396.881:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=417 comm="apparmor_parser"
[ 5.784826] audit: type=1400 audit(1565425396.881:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=417 comm="apparmor_parser"
[ 5.784830] audit: type=1400 audit(1565425396.881:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=417 comm="apparmor_parser"
[ 5.795046] audit: type=1400 audit(1565425396.893:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=421 comm="apparmor_parser"
[ 5.797796] audit: type=1400 audit(1565425396.897:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/msmtp" pid=420 comm="apparmor_parser"
[ 5.808231] usb 1-1.3: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 5.808233] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.814995] probe of 1-1.3 returned 1 after 6677 usecs
[ 5.844172] calling ecdh_init+0x0/0x20 [ecdh_generic] @ 326
[ 5.845617] initcall ecdh_init+0x0/0x20 [ecdh_generic] returned 0 after 1403 usecs
[ 5.893671] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 5.897637] calling bt_init+0x0/0xa5 [bluetooth] @ 326
[ 5.897639] Bluetooth: Core ver 2.22
[ 5.897660] NET: Registered protocol family 31
[ 5.897661] Bluetooth: HCI device and connection manager initialized
[ 5.897664] Bluetooth: HCI socket layer initialized
[ 5.897666] Bluetooth: L2CAP socket layer initialized
[ 5.897669] Bluetooth: SCO socket layer initialized
[ 5.897686] initcall bt_init+0x0/0xa5 [bluetooth] returned 0 after 32 usecs
[ 5.938826] calling btusb_driver_init+0x0/0x1000 [btusb] @ 326
[ 5.939052] probe of 1-1.3:1.0 returned 1 after 207 usecs
[ 5.939082] usbcore: registered new interface driver btusb
[ 5.939089] initcall btusb_driver_init+0x0/0x1000 [btusb] returned 0 after 249 usecs
[ 5.953835] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 5.971413] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 5.971417] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 6.060890] usb 1-1.6: New USB device found, idVendor=1bcf, idProduct=28ae, bcdDevice=47.02
[ 6.060892] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.060893] usb 1-1.6: Product: Integrated_Webcam_HD
[ 6.060894] usb 1-1.6: Manufacturer: CN0FHKK77248753EC62HA00
[ 6.132076] probe of 1-1.6 returned 1 after 71026 usecs
[ 6.196802] calling media_devnode_init+0x0/0x1000 [media] @ 319
[ 6.196803] media: Linux media interface: v0.10
[ 6.196815] initcall media_devnode_init+0x0/0x1000 [media] returned 0 after 8 usecs
[ 6.218016] calling videodev_init+0x0/0x7e [videodev] @ 319
[ 6.218017] videodev: Linux video capture interface: v2.00
[ 6.218033] initcall videodev_init+0x0/0x7e [videodev] returned 0 after 7 usecs
[ 6.252761] Console: switching to colour frame buffer device 170x48
[ 6.272254] calling uvc_init+0x0/0x1000 [uvcvideo] @ 319
[ 6.273801] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 6.275897] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28ae)
[ 6.277629] uvcvideo: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[ 6.278731] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 6.295794] Bluetooth: hci0: Intel firmware patch completed and activated
[ 6.298627] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 6.298658] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 6.298662] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 6.298666] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 6.298858] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15
[ 6.298986] probe of 1-1.6:1.0 returned 1 after 26697 usecs
[ 6.299025] usbcore: registered new interface driver uvcvideo
[ 6.299027] USB Video Class driver (1.1.1)
[ 6.299043] initcall uvc_init+0x0/0x1000 [uvcvideo] returned 0 after 26145 usecs
[ 6.325646] calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 430
[ 6.328030] probe of hdaudioC0D0 returned 1 after 2362 usecs
[ 6.328047] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 2326 usecs
[ 6.328569] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 6.328624] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 6.328673] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 6.328720] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 6.328767] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 7.064653] Process accounting resumed
[ 7.508306] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 7.508308] iwlwifi 0000:02:00.0: reporting RF_KILL (radio enabled)
[ 10.865593] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.865628] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 12.619878] wlp2s0: authenticate with 54:67:51:dd:7a:b3
[ 12.625664] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 1/3)
[ 12.759628] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 2/3)
[ 12.848021] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 3/3)
[ 12.925680] wlp2s0: authentication with 54:67:51:dd:7a:b3 timed out
[ 14.044061] wlp2s0: authenticate with 54:67:51:dd:7a:b3
[ 14.048420] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 1/3)
[ 14.119685] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 2/3)
[ 14.189678] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 3/3)
[ 14.262988] wlp2s0: authentication with 54:67:51:dd:7a:b3 timed out
[ 15.774377] wlp2s0: authenticate with 54:67:51:dd:7a:b3
[ 15.779008] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 1/3)
[ 15.848357] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 2/3)
[ 15.923663] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 3/3)
[ 16.005912] wlp2s0: authentication with 54:67:51:dd:7a:b3 timed out
[ 18.022037] wlp2s0: authenticate with 54:67:51:dd:7a:b3
[ 18.027246] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 1/3)
[ 18.086244] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 2/3)
[ 18.164848] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 3/3)
[ 18.230274] wlp2s0: authentication with 54:67:51:dd:7a:b3 timed out
[ 28.558562] wlp2s0: authenticate with 54:67:51:dd:7a:b3
[ 28.562944] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 1/3)
[ 28.618057] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 2/3)
[ 28.689703] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 3/3)
[ 28.767714] wlp2s0: authentication with 54:67:51:dd:7a:b3 timed out
[ 31.506851] rfkill: input handler disabled
[ 35.191814] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[ 35.191816] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled)
[ 129.263167] kauditd_printk_skb: 13 callbacks suppressed
[ 129.263168] audit: type=1400 audit(1565425518.848:25): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-oopslash" pid=4168 comm="apparmor_parser"
[ 129.283734] audit: type=1400 audit(1565425518.868:26): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-senddoc" pid=4171 comm="apparmor_parser"
[ 132.876053] audit: type=1400 audit(1565425522.460:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice" pid=4174 comm="apparmor_parser"
[ 132.895326] audit: type=1400 audit(1565425522.480:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice//gpg" pid=4174 comm="apparmor_parser"
[ 132.925346] audit: type=1400 audit(1565425522.508:29): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-xpdfimport" pid=4177 comm="apparmor_parser"
[ 978.330146] e1000e: eno1 NIC Link is Down
[ 980.384706] PM: suspend entry (deep)
[ 980.409413] Filesystems sync: 0.024 seconds
[ 980.409657] (NULL device *): firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 980.409936] (NULL device *): firmware: direct-loading firmware iwlwifi-7265D-29.ucode
[ 980.409978] Freezing user space processes ... (elapsed 0.032 seconds) done.
[ 980.442156] OOM killer disabled.
[ 980.442157] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 980.443438] printk: Suspending console(s) (use no_console_suspend to debug)
[ 980.546136] input input20: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card0
[ 980.546138] input input20: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546141] input input19: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card0
[ 980.546143] input input19: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546145] input input18: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card0
[ 980.546146] input input18: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546148] input input17: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card0
[ 980.546150] input input17: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546152] input input16: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card0
[ 980.546153] input input16: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546159] sound pcmC0D10p: calling do_pcm_suspend+0x0/0x20 [snd_pcm] @ 5933, parent: card0
[ 980.546162] sound pcmC0D10p: do_pcm_suspend+0x0/0x20 [snd_pcm] returned 0 after 0 usecs
[ 980.546165] sound pcmC0D9p: calling do_pcm_suspend+0x0/0x20 [snd_pcm] @ 5933, parent: card0
[ 980.546167] sound pcmC0D9p: do_pcm_suspend+0x0/0x20 [snd_pcm] returned 0 after 0 usecs
[ 980.546170] sound pcmC0D8p: calling do_pcm_suspend+0x0/0x20 [snd_pcm] @ 5933, parent: card0
[ 980.546172] sound pcmC0D8p: do_pcm_suspend+0x0/0x20 [snd_pcm] returned 0 after 0 usecs
[ 980.546175] sound pcmC0D7p: calling do_pcm_suspend+0x0/0x20 [snd_pcm] @ 5933, parent: card0
[ 980.546177] sound pcmC0D7p: do_pcm_suspend+0x0/0x20 [snd_pcm] returned 0 after 0 usecs
[ 980.546180] sound pcmC0D3p: calling do_pcm_suspend+0x0/0x20 [snd_pcm] @ 5933, parent: card0
[ 980.546182] sound pcmC0D3p: do_pcm_suspend+0x0/0x20 [snd_pcm] returned 0 after 0 usecs
[ 980.546189] input input15: calling input_dev_suspend+0x0/0x60 @ 5933, parent: 1-1.6:1.0
[ 980.546196] snd_hda_codec_hdmi hdaudioC0D0: calling hda_codec_pm_suspend+0x0/0x20 [snd_hda_codec] @ 175, parent: 0000:00:03.0
[ 980.546197] input input15: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546201] snd_hda_codec_hdmi hdaudioC0D0: hda_codec_pm_suspend+0x0/0x20 [snd_hda_codec] returned 0 after 0 usecs
[ 980.546203] rfkill rfkill3: calling rfkill_suspend+0x0/0x20 [rfkill] @ 5933, parent: hci0
[ 980.546206] rfkill rfkill3: rfkill_suspend+0x0/0x20 [rfkill] returned 0 after 0 usecs
[ 980.546215] usb 1-1.6: calling usb_dev_suspend+0x0/0x10 [usbcore] @ 175, parent: 1-1
[ 980.546220] usb 1-1.6: usb_dev_suspend+0x0/0x10 [usbcore] returned 0 after 0 usecs
[ 980.546223] coretemp coretemp.0: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.546225] coretemp coretemp.0: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546232] usb 1-1.3: calling usb_dev_suspend+0x0/0x10 [usbcore] @ 175, parent: 1-1
[ 980.546235] rfkill rfkill2: calling rfkill_suspend+0x0/0x20 [rfkill] @ 5933, parent: phy0
[ 980.546241] usb 1-1.3: usb_dev_suspend+0x0/0x10 [usbcore] returned 0 after 0 usecs
[ 980.546243] rfkill rfkill2: rfkill_suspend+0x0/0x20 [rfkill] returned 0 after 0 usecs
[ 980.546248] usb 1-1: calling usb_dev_suspend+0x0/0x10 [usbcore] @ 8, parent: usb1
[ 980.546250] leds platform::micmute: calling led_suspend+0x0/0x30 @ 5933, parent: dell-laptop
[ 980.546252] leds platform::micmute: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 980.546257] leds phy0-led: calling led_suspend+0x0/0x30 @ 5933, parent: 0000:02:00.0
[ 980.546259] leds phy0-led: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 980.546277] ieee80211 phy0: calling wiphy_suspend+0x0/0x270 [cfg80211] @ 175, parent: 0000:02:00.0
[ 980.546280] input input14: calling input_dev_suspend+0x0/0x60 @ 5933, parent: 9DBB5994-A997-11DA-B012-B622A1EF5492
[ 980.546282] input input14: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546294] ieee80211 phy0: wiphy_suspend+0x0/0x270 [cfg80211] returned 0 after 2 usecs
[ 980.546295] leds dell::kbd_backlight: calling led_suspend+0x0/0x30 @ 5933, parent: dell-laptop
[ 980.546297] leds dell::kbd_backlight: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 980.546300] rfkill rfkill1: calling rfkill_suspend+0x0/0x20 [rfkill] @ 5933, parent: dell-laptop
[ 980.546302] rfkill rfkill1: rfkill_suspend+0x0/0x20 [rfkill] returned 0 after 0 usecs
[ 980.546306] input input12: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card1
[ 980.546307] input input12: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546310] input input11: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card1
[ 980.546311] input input11: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546313] input input10: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card1
[ 980.546315] input input10: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546317] input input9: calling input_dev_suspend+0x0/0x60 @ 5933, parent: card1
[ 980.546318] input input9: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546322] sound pcmC1D0c: calling do_pcm_suspend+0x0/0x20 [snd_pcm] @ 5933, parent: card1
[ 980.546324] sound pcmC1D0c: do_pcm_suspend+0x0/0x20 [snd_pcm] returned 0 after 0 usecs
[ 980.546327] sound pcmC1D0p: calling do_pcm_suspend+0x0/0x20 [snd_pcm] @ 5933, parent: card1
[ 980.546329] sound pcmC1D0p: do_pcm_suspend+0x0/0x20 [snd_pcm] returned 0 after 0 usecs
[ 980.546334] input input13: calling input_dev_suspend+0x0/0x60 @ 5933, parent: LNXVIDEO:00
[ 980.546336] snd_hda_intel 0000:00:03.0: calling pci_pm_suspend+0x0/0x130 @ 5940, parent: pci0000:00
[ 980.546338] input input13: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546345] backlight intel_backlight: calling backlight_suspend+0x0/0x80 @ 5933, parent: card0-eDP-1
[ 980.546347] backlight intel_backlight: backlight_suspend+0x0/0x80 returned 0 after 0 usecs
[ 980.546352] rfkill rfkill0: calling rfkill_suspend+0x0/0x20 [rfkill] @ 5933, parent: dell-laptop
[ 980.546354] rfkill rfkill0: rfkill_suspend+0x0/0x20 [rfkill] returned 0 after 0 usecs
[ 980.546357] dell-laptop dell-laptop: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.546359] dell-laptop dell-laptop: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546361] dell-smbios dell-smbios.1: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.546363] dell-smbios dell-smbios.1: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546366] dell-smbios dell-smbios.0: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.546367] dell-smbios dell-smbios.0: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546371] dcdbas dcdbas: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.546373] dcdbas dcdbas: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546383] snd_hda_intel 0000:00:03.0: pci_pm_suspend+0x0/0x130 returned 0 after 43 usecs
[ 980.546389] snd_hda_codec_realtek hdaudioC1D0: calling hda_codec_pm_suspend+0x0/0x20 [snd_hda_codec] @ 175, parent: 0000:00:1b.0
[ 980.546390] leds mmc0::: calling led_suspend+0x0/0x30 @ 5933, parent: 0000:01:00.0
[ 980.546398] usb usb3: calling usb_dev_suspend+0x0/0x10 [usbcore] @ 5940, parent: 0000:00:14.0
[ 980.546404] snd_hda_codec_realtek hdaudioC1D0: hda_codec_pm_suspend+0x0/0x20 [snd_hda_codec] returned 0 after 0 usecs
[ 980.546405] leds mmc0::: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 980.546421] usb usb2: calling usb_dev_suspend+0x0/0x10 [usbcore] @ 175, parent: 0000:00:14.0
[ 980.546423] input input8: calling input_dev_suspend+0x0/0x60 @ 5933, parent: pcspkr
[ 980.546425] input input8: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546428] platform regulatory.0: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.546430] platform regulatory.0: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546435] platform intel-spi: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 980.546437] platform intel-spi: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546440] iTCO_wdt iTCO_wdt.0.auto: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 980.546442] iTCO_wdt iTCO_wdt.0.auto: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546451] input input7: calling input_dev_suspend+0x0/0x60 @ 5933, parent: none
[ 980.546453] input input7: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546459] usb usb3: usb_dev_suspend+0x0/0x10 [usbcore] returned 0 after 53 usecs
[ 980.546461] input input6: calling input_dev_suspend+0x0/0x60 @ 5933, parent: LNXPWRBN:00
[ 980.546463] input input6: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546466] input input5: calling input_dev_suspend+0x0/0x60 @ 5933, parent: PNP0C0E:00
[ 980.546469] input input5: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546472] input input4: calling input_dev_suspend+0x0/0x60 @ 5933, parent: PNP0C0C:00
[ 980.546474] input input4: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546479] usb usb2: usb_dev_suspend+0x0/0x10 [usbcore] returned 0 after 51 usecs
[ 980.546480] input input3: calling input_dev_suspend+0x0/0x60 @ 5933, parent: PNP0C0D:00
[ 980.546482] input input3: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546485] input input2: calling input_dev_suspend+0x0/0x60 @ 5933, parent: serio1
[ 980.546486] input input2: input_dev_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.546502] sd 1:0:0:0: calling scsi_bus_suspend+0x0/0x20 [scsi_mod] @ 175, parent: target1:0:0
[ 980.546504] platform microcode: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.546506] platform microcode: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546511] leds input0::scrolllock: calling led_suspend+0x0/0x30 @ 5933, parent: input0
[ 980.546512] leds input0::scrolllock: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 980.546515] leds input0::capslock: calling led_suspend+0x0/0x30 @ 5933, parent: input0
[ 980.546516] leds input0::capslock: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 980.546518] leds input0::numlock: calling led_suspend+0x0/0x30 @ 5933, parent: input0
[ 980.546519] leds input0::numlock: led_suspend+0x0/0x30 returned 0 after 0 usecs
[ 980.546522] input input0: calling input_dev_suspend+0x0/0x60 @ 5933, parent: serio0
[ 980.546532] input input0: input_dev_suspend+0x0/0x60 returned 0 after 8 usecs
[ 980.546541] scsi host0: calling scsi_bus_suspend+0x0/0x20 [scsi_mod] @ 5942, parent: ata1
[ 980.546543] platform efivars.0: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.546547] scsi host0: scsi_bus_suspend+0x0/0x20 [scsi_mod] returned 0 after 0 usecs
[ 980.546548] platform efivars.0: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.546551] rtc rtc0: calling rtc_suspend+0x0/0x180 @ 5933, parent: 00:01
[ 980.546557] ata1: calling ata_port_pm_suspend+0x0/0x40 [libata] @ 5943, parent: 0000:00:1f.2
[ 980.546558] rtc rtc0: rtc_suspend+0x0/0x180 returned 0 after 0 usecs
[ 980.546561] psmouse serio1: calling serio_suspend+0x0/0x20 @ 5933, parent: i8042
[ 980.546583] ata1: ata_port_pm_suspend+0x0/0x40 [libata] returned 0 after 21 usecs
[ 980.553966] psmouse serio1: serio_suspend+0x0/0x20 returned 0 after 7228 usecs
[ 980.553970] atkbd serio0: calling serio_suspend+0x0/0x20 @ 5933, parent: i8042
[ 980.554182] atkbd serio0: serio_suspend+0x0/0x20 returned 0 after 205 usecs
[ 980.554185] i8042 i8042: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.555984] i8042 i8042: platform_pm_suspend+0x0/0x40 returned 0 after 1755 usecs
[ 980.555988] serial8250 serial8250: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.555990] serial8250 serial8250: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.556011] alarmtimer alarmtimer: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.556012] alarmtimer alarmtimer: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.556015] efi-framebuffer efi-framebuffer.0: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.556016] efi-framebuffer efi-framebuffer.0: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.556018] pcspkr pcspkr: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.556027] pcspkr pcspkr: platform_pm_suspend+0x0/0x40 returned 0 after 6 usecs
[ 980.556054] tpm_tis 00:08: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.566010] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 980.568062] sd 1:0:0:0: [sda] Stopping disk
[ 980.571087] tpm_tis 00:08: pnp_bus_suspend+0x0/0x10 returned 0 after 14670 usecs
[ 980.571097] system 00:07: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.571100] system 00:07: pnp_bus_suspend+0x0/0x10 returned 0 after 0 usecs
[ 980.571103] system 00:06: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.571105] system 00:06: pnp_bus_suspend+0x0/0x10 returned 0 after 0 usecs
[ 980.571109] pnp 00:05: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.571111] pnp 00:05: pnp_bus_suspend+0x0/0x10 returned 0 after 0 usecs
[ 980.571114] i8042 aux 00:04: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.571117] i8042 aux 00:04: pnp_bus_suspend+0x0/0x10 returned 0 after 0 usecs
[ 980.571120] i8042 kbd 00:03: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.571122] i8042 kbd 00:03: pnp_bus_suspend+0x0/0x10 returned 0 after 0 usecs
[ 980.571125] system 00:02: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.571128] system 00:02: pnp_bus_suspend+0x0/0x10 returned 0 after 0 usecs
[ 980.571132] rtc_cmos 00:01: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.571153] rtc_cmos 00:01: pnp_bus_suspend+0x0/0x10 returned 0 after 17 usecs
[ 980.571156] system 00:00: calling pnp_bus_suspend+0x0/0x10 @ 5933, parent: pnp0
[ 980.571158] system 00:00: pnp_bus_suspend+0x0/0x10 returned 0 after 0 usecs
[ 980.571170] button LNXPWRBN:00: calling acpi_button_suspend+0x0/0x10 [button] @ 5933, parent: LNXSYSTM:00
[ 980.571173] button LNXPWRBN:00: acpi_button_suspend+0x0/0x10 [button] returned 0 after 0 usecs
[ 980.571178] acpi-fan PNP0C0B:04: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: platform
[ 980.571182] acpi-fan PNP0C0B:04: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571185] acpi-fan PNP0C0B:03: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: platform
[ 980.571188] acpi-fan PNP0C0B:03: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571191] acpi-fan PNP0C0B:02: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: platform
[ 980.571194] acpi-fan PNP0C0B:02: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571197] acpi-fan PNP0C0B:01: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: platform
[ 980.571200] acpi-fan PNP0C0B:01: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571203] acpi-fan PNP0C0B:00: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: platform
[ 980.571205] acpi-fan PNP0C0B:00: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571209] int3400 thermal INT3400:00: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: platform
[ 980.571211] int3400 thermal INT3400:00: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571216] platform INT340F:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.571218] platform INT340F:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571221] platform DELLABCE:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.571224] platform DELLABCE:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571227] platform PNP0C0A:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.571229] platform PNP0C0A:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571232] platform ACPI0003:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.571235] platform ACPI0003:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571238] platform PNP0C0E:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.571240] platform PNP0C0E:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571244] platform PNP0C0C:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.571246] platform PNP0C0C:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571249] platform PNP0C0D:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.571251] platform PNP0C0D:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571255] acpi-wmi PNP0C14:00: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: platform
[ 980.571258] acpi-wmi PNP0C14:00: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571261] platform ACPI000C:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.571263] platform ACPI000C:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571268] int3402 thermal INT3402:00: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: pci0000:00
[ 980.571270] int3402 thermal INT3402:00: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571274] int3403 thermal INT3403:01: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: PNP0C09:00
[ 980.571277] int3403 thermal INT3403:01: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571280] int3403 thermal INT3403:00: calling acpi_subsys_suspend+0x0/0x60 @ 5933, parent: PNP0C09:00
[ 980.571282] int3403 thermal INT3403:00: acpi_subsys_suspend+0x0/0x60 returned 0 after 0 usecs
[ 980.571286] platform PNP0C09:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 980.571288] platform PNP0C09:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571292] platform PNP0103:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 980.571294] platform PNP0103:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571297] platform INT0800:00: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 980.571299] platform INT0800:00: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.571322] thermal LNXTHERM:02: calling acpi_thermal_suspend+0x0/0x20 @ 5933, parent: LNXSYBUS:01
[ 980.571326] thermal LNXTHERM:02: acpi_thermal_suspend+0x0/0x20 returned 0 after 1 usecs
[ 980.571329] thermal LNXTHERM:01: calling acpi_thermal_suspend+0x0/0x20 @ 5933, parent: LNXSYBUS:01
[ 980.571332] thermal LNXTHERM:01: acpi_thermal_suspend+0x0/0x20 returned 0 after 0 usecs
[ 980.571344] thermal LNXTHERM:00: calling acpi_thermal_suspend+0x0/0x20 @ 5933, parent: LNXSYBUS:01
[ 980.571350] iwlwifi 0000:02:00.0: calling pci_pm_suspend+0x0/0x130 @ 5945, parent: 0000:00:1c.3
[ 980.571354] thermal LNXTHERM:00: acpi_thermal_suspend+0x0/0x20 returned 0 after 0 usecs
[ 980.571358] sdhci-pci 0000:01:00.0: calling pci_pm_suspend+0x0/0x130 @ 5944, parent: 0000:00:1c.0
[ 980.571362] iwlwifi 0000:02:00.0: pci_pm_suspend+0x0/0x130 returned 0 after 1 usecs
[ 980.571368] dell-rbtn DELLABCE:00: calling rbtn_suspend+0x0/0x10 [dell_rbtn] @ 5933, parent: LNXSYBUS:00
[ 980.571372] dell-rbtn DELLABCE:00: rbtn_suspend+0x0/0x10 [dell_rbtn] returned 0 after 0 usecs
[ 980.571440] lpc_ich 0000:00:1f.0: calling pci_pm_suspend+0x0/0x130 @ 5943, parent: pci0000:00
[ 980.571447] lpc_ich 0000:00:1f.0: pci_pm_suspend+0x0/0x130 returned 0 after 0 usecs
[ 980.571485] pcieport 0000:00:1c.3: calling pci_pm_suspend+0x0/0x130 @ 5946, parent: pci0000:00
[ 980.571492] pcieport 0000:00:1c.3: pci_pm_suspend+0x0/0x130 returned 0 after 3 usecs
[ 980.571525] snd_hda_intel 0000:00:1b.0: calling pci_pm_suspend+0x0/0x130 @ 5947, parent: pci0000:00
[ 980.573145] button PNP0C0E:00: calling acpi_button_suspend+0x0/0x10 [button] @ 5933, parent: LNXSYBUS:00
[ 980.573149] button PNP0C0E:00: acpi_button_suspend+0x0/0x10 [button] returned 0 after 0 usecs
[ 980.573155] button PNP0C0C:00: calling acpi_button_suspend+0x0/0x10 [button] @ 5933, parent: LNXSYBUS:00
[ 980.573169] button PNP0C0C:00: acpi_button_suspend+0x0/0x10 [button] returned 0 after 0 usecs
[ 980.573175] button PNP0C0D:00: calling acpi_button_suspend+0x0/0x10 [button] @ 5933, parent: LNXSYBUS:00
[ 980.573180] button PNP0C0D:00: acpi_button_suspend+0x0/0x10 [button] returned 0 after 0 usecs
[ 980.573195] e1000e 0000:00:19.0: calling pci_pm_suspend+0x0/0x130 @ 5948, parent: pci0000:00
[ 980.573203] e1000e: EEE TX LPI TIMER: 00000011
[ 980.573245] sdhci-pci 0000:01:00.0: pci_pm_suspend+0x0/0x130 returned 0 after 1836 usecs
[ 980.573258] pcieport 0000:00:1c.0: calling pci_pm_suspend+0x0/0x130 @ 5946, parent: pci0000:00
[ 980.573262] mei_me 0000:00:16.0: calling pci_pm_suspend+0x0/0x130 @ 5944, parent: pci0000:00
[ 980.573265] pcieport 0000:00:1c.0: pci_pm_suspend+0x0/0x130 returned 0 after 2 usecs
[ 980.573270] xhci_hcd 0000:00:14.0: calling pci_pm_suspend+0x0/0x130 @ 5949, parent: pci0000:00
[ 980.573273] proc_thermal 0000:00:04.0: calling pci_pm_suspend+0x0/0x130 @ 5946, parent: pci0000:00
[ 980.573280] proc_thermal 0000:00:04.0: pci_pm_suspend+0x0/0x130 returned 0 after 2 usecs
[ 980.573291] i915 0000:00:02.0: calling pci_pm_suspend+0x0/0x130 @ 5946, parent: pci0000:00
[ 980.573305] ec PNP0C09:00: calling acpi_ec_suspend+0x0/0x70 @ 5933, parent: device:26
[ 980.573309] ec PNP0C09:00: acpi_ec_suspend+0x0/0x70 returned 0 after 0 usecs
[ 980.573313] xhci_hcd 0000:00:14.0: pci_pm_suspend+0x0/0x130 returned 0 after 38 usecs
[ 980.573321] bdw_uncore 0000:00:00.0: calling pci_pm_suspend+0x0/0x130 @ 5949, parent: pci0000:00
[ 980.573325] bdw_uncore 0000:00:00.0: pci_pm_suspend+0x0/0x130 returned 0 after 0 usecs
[ 980.573392] PCCT PCCT: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.573396] PCCT PCCT: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.573403] regulator regulator.0: calling regulator_suspend+0x0/0xc0 @ 5933, parent: reg-dummy
[ 980.573407] regulator regulator.0: regulator_suspend+0x0/0xc0 returned 0 after 0 usecs
[ 980.573411] reg-dummy reg-dummy: calling platform_pm_suspend+0x0/0x40 @ 5933, parent: platform
[ 980.573414] reg-dummy reg-dummy: platform_pm_suspend+0x0/0x40 returned 0 after 0 usecs
[ 980.573722] mei_me 0000:00:16.0: pci_pm_suspend+0x0/0x130 returned 0 after 444 usecs
[ 980.573974] snd_hda_intel 0000:00:1b.0: pci_pm_suspend+0x0/0x130 returned 0 after 2386 usecs
[ 980.610834] e1000e 0000:00:19.0: pci_pm_suspend+0x0/0x130 returned 0 after 36753 usecs
[ 980.617470] usb 1-1: usb_dev_suspend+0x0/0x10 [usbcore] returned 0 after 69533 usecs
[ 980.617507] usb usb1: calling usb_dev_suspend+0x0/0x10 [usbcore] @ 5940, parent: 0000:00:1d.0
[ 980.617823] usb usb1: usb_dev_suspend+0x0/0x10 [usbcore] returned 0 after 300 usecs
[ 980.617833] ehci-pci 0000:00:1d.0: calling pci_pm_suspend+0x0/0x130 @ 5943, parent: pci0000:00
[ 980.634048] ehci-pci 0000:00:1d.0: pci_pm_suspend+0x0/0x130 returned 0 after 15824 usecs
[ 981.358181] i915 0000:00:02.0: pci_pm_suspend+0x0/0x130 returned 0 after 766487 usecs
[ 981.416769] sd 1:0:0:0: scsi_bus_suspend+0x0/0x20 [scsi_mod] returned 0 after 849857 usecs
[ 981.416805] scsi target1:0:0: calling scsi_bus_suspend+0x0/0x20 [scsi_mod] @ 5941, parent: host1
[ 981.416812] scsi target1:0:0: scsi_bus_suspend+0x0/0x20 [scsi_mod] returned 0 after 0 usecs
[ 981.416865] scsi host1: calling scsi_bus_suspend+0x0/0x20 [scsi_mod] @ 5939, parent: ata2
[ 981.416872] scsi host1: scsi_bus_suspend+0x0/0x20 [scsi_mod] returned 0 after 0 usecs
[ 981.416888] ata2: calling ata_port_pm_suspend+0x0/0x40 [libata] @ 5942, parent: 0000:00:1f.2
[ 981.416913] ata2: ata_port_pm_suspend+0x0/0x40 [libata] returned 0 after 17 usecs
[ 981.416967] ahci 0000:00:1f.2: calling pci_pm_suspend+0x0/0x130 @ 5945, parent: pci0000:00
[ 981.416973] ahci 0000:00:1f.2: pci_pm_suspend+0x0/0x130 returned 0 after 3 usecs
[ 981.417073] snd_hda_intel 0000:00:03.0: calling pci_pm_suspend_late+0x0/0x30 @ 5939, parent: pci0000:00
[ 981.417075] snd_hda_intel 0000:00:03.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417215] acpi-fan PNP0C0B:04: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: platform
[ 981.417222] acpi-fan PNP0C0B:04: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 4 usecs
[ 981.417224] acpi-fan PNP0C0B:03: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: platform
[ 981.417227] acpi-fan PNP0C0B:03: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417229] acpi-fan PNP0C0B:02: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: platform
[ 981.417231] acpi-fan PNP0C0B:02: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417233] acpi-fan PNP0C0B:01: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: platform
[ 981.417235] acpi-fan PNP0C0B:01: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417237] acpi-fan PNP0C0B:00: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: platform
[ 981.417239] acpi-fan PNP0C0B:00: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417241] int3400 thermal INT3400:00: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: platform
[ 981.417243] int3400 thermal INT3400:00: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417248] acpi-wmi PNP0C14:00: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: platform
[ 981.417249] acpi-wmi PNP0C14:00: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417252] int3402 thermal INT3402:00: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: pci0000:00
[ 981.417253] int3402 thermal INT3402:00: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417255] int3403 thermal INT3403:01: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: PNP0C09:00
[ 981.417257] int3403 thermal INT3403:01: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417259] int3403 thermal INT3403:00: calling acpi_subsys_suspend_late+0x0/0x50 @ 5933, parent: PNP0C09:00
[ 981.417261] int3403 thermal INT3403:00: acpi_subsys_suspend_late+0x0/0x50 returned 0 after 0 usecs
[ 981.417269] iwlwifi 0000:02:00.0: calling pci_pm_suspend_late+0x0/0x30 @ 5942, parent: 0000:00:1c.3
[ 981.417271] sdhci-pci 0000:01:00.0: calling pci_pm_suspend_late+0x0/0x30 @ 5949, parent: 0000:00:1c.0
[ 981.417273] iwlwifi 0000:02:00.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417275] ahci 0000:00:1f.2: calling pci_pm_suspend_late+0x0/0x30 @ 5939, parent: pci0000:00
[ 981.417277] sdhci-pci 0000:01:00.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417279] lpc_ich 0000:00:1f.0: calling pci_pm_suspend_late+0x0/0x30 @ 5942, parent: pci0000:00
[ 981.417280] ahci 0000:00:1f.2: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417282] ehci-pci 0000:00:1d.0: calling pci_pm_suspend_late+0x0/0x30 @ 5949, parent: pci0000:00
[ 981.417284] lpc_ich 0000:00:1f.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417285] pcieport 0000:00:1c.3: calling pci_pm_suspend_late+0x0/0x30 @ 5939, parent: pci0000:00
[ 981.417287] ehci-pci 0000:00:1d.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417289] pcieport 0000:00:1c.0: calling pci_pm_suspend_late+0x0/0x30 @ 5942, parent: pci0000:00
[ 981.417290] pcieport 0000:00:1c.3: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417292] snd_hda_intel 0000:00:1b.0: calling pci_pm_suspend_late+0x0/0x30 @ 5949, parent: pci0000:00
[ 981.417293] pcieport 0000:00:1c.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417295] e1000e 0000:00:19.0: calling pci_pm_suspend_late+0x0/0x30 @ 5939, parent: pci0000:00
[ 981.417297] snd_hda_intel 0000:00:1b.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417298] mei_me 0000:00:16.0: calling pci_pm_suspend_late+0x0/0x30 @ 5942, parent: pci0000:00
[ 981.417300] e1000e 0000:00:19.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417302] xhci_hcd 0000:00:14.0: calling pci_pm_suspend_late+0x0/0x30 @ 5949, parent: pci0000:00
[ 981.417303] mei_me 0000:00:16.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417305] proc_thermal 0000:00:04.0: calling pci_pm_suspend_late+0x0/0x30 @ 5939, parent: pci0000:00
[ 981.417307] xhci_hcd 0000:00:14.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417308] proc_thermal 0000:00:04.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.417310] i915 0000:00:02.0: calling pci_pm_suspend_late+0x0/0x30 @ 5942, parent: pci0000:00
[ 981.417312] bdw_uncore 0000:00:00.0: calling pci_pm_suspend_late+0x0/0x30 @ 5949, parent: pci0000:00
[ 981.417313] bdw_uncore 0000:00:00.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 0 usecs
[ 981.434062] i915 0000:00:02.0: pci_pm_suspend_late+0x0/0x30 returned 0 after 16350 usecs
[ 981.434336] snd_hda_intel 0000:00:03.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5949, parent: pci0000:00
[ 981.434439] iTCO_wdt iTCO_wdt.0.auto: calling iTCO_wdt_suspend_noirq+0x0/0x40 [iTCO_wdt] @ 5933, parent: 0000:00:1f.0
[ 981.434443] iTCO_wdt iTCO_wdt.0.auto: iTCO_wdt_suspend_noirq+0x0/0x40 [iTCO_wdt] returned 0 after 0 usecs
[ 981.434574] acpi-fan PNP0C0B:04: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: platform
[ 981.434577] acpi-fan PNP0C0B:04: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434580] acpi-fan PNP0C0B:03: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: platform
[ 981.434582] acpi-fan PNP0C0B:03: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434585] acpi-fan PNP0C0B:02: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: platform
[ 981.434587] acpi-fan PNP0C0B:02: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434590] acpi-fan PNP0C0B:01: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: platform
[ 981.434593] acpi-fan PNP0C0B:01: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434595] acpi-fan PNP0C0B:00: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: platform
[ 981.434598] acpi-fan PNP0C0B:00: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434601] int3400 thermal INT3400:00: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: platform
[ 981.434603] int3400 thermal INT3400:00: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434610] acpi-wmi PNP0C14:00: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: platform
[ 981.434613] acpi-wmi PNP0C14:00: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434617] int3402 thermal INT3402:00: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: pci0000:00
[ 981.434619] int3402 thermal INT3402:00: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434622] int3403 thermal INT3403:01: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: PNP0C09:00
[ 981.434624] int3403 thermal INT3403:01: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434627] int3403 thermal INT3403:00: calling acpi_subsys_suspend_noirq+0x0/0x70 @ 5933, parent: PNP0C09:00
[ 981.434630] int3403 thermal INT3403:00: acpi_subsys_suspend_noirq+0x0/0x70 returned 0 after 0 usecs
[ 981.434648] iwlwifi 0000:02:00.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5939, parent: 0000:00:1c.3
[ 981.434651] sdhci-pci 0000:01:00.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5941, parent: 0000:00:1c.0
[ 981.434655] ahci 0000:00:1f.2: calling pci_pm_suspend_noirq+0x0/0x280 @ 5946, parent: pci0000:00
[ 981.434748] ec PNP0C09:00: calling acpi_ec_suspend_noirq+0x0/0x50 @ 5933, parent: device:26
[ 981.434750] ACPI: EC: interrupt blocked
[ 981.434753] ec PNP0C09:00: acpi_ec_suspend_noirq+0x0/0x50 returned 0 after 1 usecs
[ 981.455889] snd_hda_intel 0000:00:03.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 21044 usecs
[ 981.455894] lpc_ich 0000:00:1f.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5949, parent: pci0000:00
[ 981.461671] ehci-pci 0000:00:1d.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 175, parent: pci0000:00
[ 981.492488] lpc_ich 0000:00:1f.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 35734 usecs
[ 981.496348] snd_hda_intel 0000:00:1b.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5945, parent: pci0000:00
[ 981.500378] e1000e 0000:00:19.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5892, parent: pci0000:00
[ 981.500382] mei_me 0000:00:16.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5943, parent: pci0000:00
[ 981.500385] xhci_hcd 0000:00:14.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5940, parent: pci0000:00
[ 981.500436] proc_thermal 0000:00:04.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 8, parent: pci0000:00
[ 981.500440] i915 0000:00:02.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5948, parent: pci0000:00
[ 981.500442] i915 0000:00:02.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 0 usecs
[ 981.500443] bdw_uncore 0000:00:00.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5947, parent: pci0000:00
[ 981.500447] proc_thermal 0000:00:04.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 8 usecs
[ 981.500452] bdw_uncore 0000:00:00.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 7 usecs
[ 981.500502] ahci 0000:00:1f.2: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 64301 usecs
[ 981.517934] snd_hda_intel 0000:00:1b.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 21075 usecs
[ 981.517937] mei_me 0000:00:16.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 17139 usecs
[ 981.517940] e1000e 0000:00:19.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 17143 usecs
[ 981.518109] iwlwifi 0000:02:00.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 81501 usecs
[ 981.518111] ehci-pci 0000:00:1d.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 55113 usecs
[ 981.519880] sdhci-pci 0000:01:00.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 83227 usecs
[ 981.519888] pcieport 0000:00:1c.0: calling pci_pm_suspend_noirq+0x0/0x280 @ 5942, parent: pci0000:00
[ 981.519934] pcieport 0000:00:1c.3: calling pci_pm_suspend_noirq+0x0/0x280 @ 5949, parent: pci0000:00
[ 981.520271] xhci_hcd 0000:00:14.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 19417 usecs
[ 981.537932] pcieport 0000:00:1c.0: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 17617 usecs
[ 981.537934] pcieport 0000:00:1c.3: pci_pm_suspend_noirq+0x0/0x280 returned 0 after 17573 usecs
[ 981.538343] ACPI: Preparing to enter system sleep state S3
[ 981.542197] ACPI: EC: event blocked
[ 981.542198] ACPI: EC: EC stopped
[ 981.542200] PM: Saving platform NVS memory
[ 981.542254] Disabling non-boot CPUs ...
[ 981.543680] smpboot: CPU 1 is now offline
[ 981.549056] smpboot: CPU 2 is now offline
[ 981.552831] smpboot: CPU 3 is now offline
[ 981.555371] PM: Calling kvm_suspend+0x0/0x20 [kvm]
[ 981.555376] PM: Calling mce_syscore_suspend+0x0/0x10
[ 981.555379] PM: Calling ledtrig_cpu_syscore_suspend+0x0/0x20
[ 981.555383] PM: Calling timekeeping_suspend+0x0/0x2c0
[ 981.555416] PM: Calling irq_gc_suspend+0x0/0x70
[ 981.555420] PM: Calling save_ioapic_entries+0x0/0xa0
[ 981.555547] PM: Calling i8259A_suspend+0x0/0x30
[ 981.555553] PM: Calling fw_suspend+0x0/0x20
[ 981.555555] PM: Calling acpi_save_bm_rld+0x0/0x20
[ 981.555561] PM: Calling intel_epb_save+0x0/0x30
[ 981.555563] PM: Calling lapic_suspend+0x0/0x1f0
[ 981.556848] ACPI: Low-level resume complete
[ 981.556892] ACPI: EC: EC started
[ 981.556893] PM: Restoring platform NVS memory
[ 981.556928] PM: Calling lapic_resume+0x0/0x2d0
[ 981.556950] PM: Calling intel_epb_restore+0x0/0x70
[ 981.556953] PM: Calling acpi_restore_bm_rld+0x0/0x60
[ 981.556957] PM: Calling irqrouter_resume+0x0/0x50
[ 981.556959] PM: Calling i8259A_resume+0x0/0x2b
[ 981.557094] PM: Calling ioapic_resume+0x0/0xc0
[ 981.557149] PM: Calling irq_gc_resume+0x0/0x70
[ 981.557150] PM: Calling irq_pm_syscore_resume+0x0/0x10
[ 981.557161] PM: Calling timekeeping_resume+0x0/0x160
[ 981.557203] PM: Calling ledtrig_cpu_syscore_resume+0x0/0x10
[ 981.557205] PM: Calling mce_syscore_resume+0x0/0x30
[ 981.557219] PM: Calling mc_bp_resume+0x0/0x48
[ 981.559209] PM: Calling kvm_resume+0x0/0x20 [kvm]
[ 981.559245] Enabling non-boot CPUs ...
[ 981.559278] x86: Booting SMP configuration:
[ 981.559279] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 981.561183] CPU1 is up
[ 981.561203] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 981.561992] CPU2 is up
[ 981.562010] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 981.562867] CPU3 is up
[ 981.574026] ACPI: Waking up from system sleep state S3
[ 981.615604] bdw_uncore 0000:00:00.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5949, parent: pci0000:00
[ 981.615606] i915 0000:00:02.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5942, parent: pci0000:00
[ 981.615615] proc_thermal 0000:00:04.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5940, parent: pci0000:00
[ 981.615631] bdw_uncore 0000:00:00.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 13 usecs
[ 981.615635] xhci_hcd 0000:00:14.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5949, parent: pci0000:00
[ 981.615659] proc_thermal 0000:00:04.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 40 usecs
[ 981.615674] mei_me 0000:00:16.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5940, parent: pci0000:00
[ 981.615676] e1000e 0000:00:19.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5941, parent: pci0000:00
[ 981.615693] snd_hda_intel 0000:00:1b.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5939, parent: pci0000:00
[ 981.615719] pcieport 0000:00:1c.3: calling pci_pm_resume_noirq+0x0/0x100 @ 5892, parent: pci0000:00
[ 981.615733] ehci-pci 0000:00:1d.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5943, parent: pci0000:00
[ 981.615735] lpc_ich 0000:00:1f.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5945, parent: pci0000:00
[ 981.615740] pcieport 0000:00:1c.0: calling pci_pm_resume_noirq+0x0/0x100 @ 175, parent: pci0000:00
[ 981.615785] ahci 0000:00:1f.2: calling pci_pm_resume_noirq+0x0/0x100 @ 5946, parent: pci0000:00
[ 981.615793] ec PNP0C09:00: calling acpi_ec_resume_noirq+0x0/0x50 @ 5933, parent: device:26
[ 981.615794] ACPI: EC: interrupt unblocked
[ 981.615797] ec PNP0C09:00: acpi_ec_resume_noirq+0x0/0x50 returned 0 after 1 usecs
[ 981.615805] lpc_ich 0000:00:1f.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 65 usecs
[ 981.615835] int3403 thermal INT3403:00: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: PNP0C09:00
[ 981.615837] int3403 thermal INT3403:00: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615839] int3403 thermal INT3403:01: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: PNP0C09:00
[ 981.615841] int3403 thermal INT3403:01: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615843] int3402 thermal INT3402:00: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: pci0000:00
[ 981.615844] int3402 thermal INT3402:00: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615847] acpi-wmi PNP0C14:00: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: platform
[ 981.615849] acpi-wmi PNP0C14:00: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615853] int3400 thermal INT3400:00: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: platform
[ 981.615867] int3400 thermal INT3400:00: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615870] acpi-fan PNP0C0B:00: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: platform
[ 981.615872] acpi-fan PNP0C0B:00: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615875] acpi-fan PNP0C0B:01: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: platform
[ 981.615877] acpi-fan PNP0C0B:01: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615879] acpi-fan PNP0C0B:02: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: platform
[ 981.615882] acpi-fan PNP0C0B:02: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615885] acpi-fan PNP0C0B:03: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: platform
[ 981.615887] acpi-fan PNP0C0B:03: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615889] acpi-fan PNP0C0B:04: calling acpi_subsys_resume_noirq+0x0/0x40 @ 5933, parent: platform
[ 981.615890] acpi-fan PNP0C0B:04: acpi_subsys_resume_noirq+0x0/0x40 returned 0 after 0 usecs
[ 981.615928] i8042 i8042: calling i8042_pm_resume_noirq+0x0/0x20 @ 5933, parent: platform
[ 981.615930] i8042 i8042: i8042_pm_resume_noirq+0x0/0x20 returned 0 after 0 usecs
[ 981.615964] iTCO_wdt iTCO_wdt.0.auto: calling iTCO_wdt_resume_noirq+0x0/0x20 [iTCO_wdt] @ 5933, parent: 0000:00:1f.0
[ 981.615967] iTCO_wdt iTCO_wdt.0.auto: iTCO_wdt_resume_noirq+0x0/0x20 [iTCO_wdt] returned 0 after 0 usecs
[ 981.631836] e1000e 0000:00:19.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 15774 usecs
[ 981.631852] mei_me 0000:00:16.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 15779 usecs
[ 981.631860] i915 0000:00:02.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 15865 usecs
[ 981.631871] snd_hda_intel 0000:00:03.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5978, parent: pci0000:00
[ 981.635961] snd_hda_intel 0000:00:1b.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 19787 usecs
[ 981.636005] ehci-pci 0000:00:1d.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 19789 usecs
[ 981.636041] ahci 0000:00:1f.2: pci_pm_resume_noirq+0x0/0x100 returned 0 after 19777 usecs
[ 981.651826] snd_hda_intel 0000:00:03.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 19481 usecs
[ 981.651838] xhci_hcd 0000:00:14.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 35348 usecs
[ 981.743724] pcieport 0000:00:1c.3: pci_pm_resume_noirq+0x0/0x100 returned 0 after 124999 usecs
[ 981.743747] pcieport 0000:00:1c.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 124983 usecs
[ 981.743753] iwlwifi 0000:02:00.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5944, parent: 0000:00:1c.3
[ 981.743765] sdhci-pci 0000:01:00.0: calling pci_pm_resume_noirq+0x0/0x100 @ 5947, parent: 0000:00:1c.0
[ 981.872692] sdhci-pci 0000:01:00.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 125903 usecs
[ 981.874051] iwlwifi 0000:02:00.0: pci_pm_resume_noirq+0x0/0x100 returned 0 after 127242 usecs
[ 981.874138] i915 0000:00:02.0: calling i915_pm_resume_early+0x0/0x20 [i915] @ 5944, parent: pci0000:00
[ 981.874255] int3403 thermal INT3403:00: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: PNP0C09:00
[ 981.874257] int3403 thermal INT3403:00: acpi_subsys_resume_early+0x0/0x20 returned 0 after 0 usecs
[ 981.874259] int3403 thermal INT3403:01: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: PNP0C09:00
[ 981.874287] i915 0000:00:02.0: i915_pm_resume_early+0x0/0x20 [i915] returned 0 after 117 usecs
[ 981.874289] int3403 thermal INT3403:01: acpi_subsys_resume_early+0x0/0x20 returned 0 after 0 usecs
[ 981.874292] int3402 thermal INT3402:00: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: pci0000:00
[ 981.874308] int3402 thermal INT3402:00: acpi_subsys_resume_early+0x0/0x20 returned 0 after 0 usecs
[ 981.874311] acpi-wmi PNP0C14:00: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: platform
[ 981.874312] acpi-wmi PNP0C14:00: acpi_subsys_resume_early+0x0/0x20 returned 0 after 0 usecs
[ 981.874315] int3400 thermal INT3400:00: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: platform
[ 981.874316] int3400 thermal INT3400:00: acpi_subsys_resume_early+0x0/0x20 returned 0 after 0 usecs
[ 981.874318] acpi-fan PNP0C0B:00: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: platform
[ 981.884160] acpi-fan PNP0C0B:00: acpi_subsys_resume_early+0x0/0x20 returned 0 after 9604 usecs
[ 981.884165] acpi-fan PNP0C0B:01: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: platform
[ 981.900285] acpi-fan PNP0C0B:01: acpi_subsys_resume_early+0x0/0x20 returned 0 after 15724 usecs
[ 981.900289] acpi-fan PNP0C0B:02: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: platform
[ 981.916334] acpi-fan PNP0C0B:02: acpi_subsys_resume_early+0x0/0x20 returned 0 after 15651 usecs
[ 981.916339] acpi-fan PNP0C0B:03: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: platform
[ 981.932301] acpi-fan PNP0C0B:03: acpi_subsys_resume_early+0x0/0x20 returned 0 after 15581 usecs
[ 981.932307] acpi-fan PNP0C0B:04: calling acpi_subsys_resume_early+0x0/0x20 @ 5933, parent: platform
[ 981.948159] acpi-fan PNP0C0B:04: acpi_subsys_resume_early+0x0/0x20 returned 0 after 15473 usecs
[ 981.948349] bdw_uncore 0000:00:00.0: calling pci_pm_resume+0x0/0x90 @ 175, parent: pci0000:00
[ 981.948352] i915 0000:00:02.0: calling pci_pm_resume+0x0/0x90 @ 5979, parent: pci0000:00
[ 981.948353] bdw_uncore 0000:00:00.0: pci_pm_resume+0x0/0x90 returned 0 after 1 usecs
[ 981.948361] xhci_hcd 0000:00:14.0: calling pci_pm_resume+0x0/0x90 @ 175, parent: pci0000:00
[ 981.948364] proc_thermal 0000:00:04.0: calling pci_pm_resume+0x0/0x90 @ 5944, parent: pci0000:00
[ 981.948371] proc_thermal 0000:00:04.0: pci_pm_resume+0x0/0x90 returned 0 after 4 usecs
[ 981.948386] mei_me 0000:00:16.0: calling pci_pm_resume+0x0/0x90 @ 5944, parent: pci0000:00
[ 981.948414] reg-dummy reg-dummy: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.948427] reg-dummy reg-dummy: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.948431] regulator regulator.0: calling regulator_resume+0x0/0x130 @ 5933, parent: reg-dummy
[ 981.948434] regulator regulator.0: regulator_resume+0x0/0x130 returned 0 after 0 usecs
[ 981.948438] PCCT PCCT: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.948440] PCCT PCCT: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.948459] usb usb2: root hub lost power or was reset
[ 981.948461] usb usb3: root hub lost power or was reset
[ 981.948471] ec PNP0C09:00: calling acpi_ec_resume+0x0/0x20 @ 5933, parent: device:26
[ 981.948483] ACPI: EC: event unblocked
[ 981.948503] ec PNP0C09:00: acpi_ec_resume+0x0/0x20 returned 0 after 27 usecs
[ 981.948572] button PNP0C0D:00: calling acpi_button_resume+0x0/0xa0 [button] @ 5933, parent: LNXSYBUS:00
[ 981.949035] e1000e 0000:00:19.0: calling pci_pm_resume+0x0/0x90 @ 5892, parent: pci0000:00
[ 981.949085] snd_hda_intel 0000:00:1b.0: calling pci_pm_resume+0x0/0x90 @ 5947, parent: pci0000:00
[ 981.949232] pcieport 0000:00:1c.0: calling pci_pm_resume+0x0/0x90 @ 5969, parent: pci0000:00
[ 981.949260] pcieport 0000:00:1c.3: calling pci_pm_resume+0x0/0x90 @ 5966, parent: pci0000:00
[ 981.949267] ehci-pci 0000:00:1d.0: calling pci_pm_resume+0x0/0x90 @ 5965, parent: pci0000:00
[ 981.949280] lpc_ich 0000:00:1f.0: calling pci_pm_resume+0x0/0x90 @ 5967, parent: pci0000:00
[ 981.949296] lpc_ich 0000:00:1f.0: pci_pm_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.949299] ahci 0000:00:1f.2: calling pci_pm_resume+0x0/0x90 @ 5973, parent: pci0000:00
[ 981.950098] xhci_hcd 0000:00:14.0: pci_pm_resume+0x0/0x90 returned 0 after 1681 usecs
[ 981.950132] usb usb2: calling usb_dev_resume+0x0/0x10 [usbcore] @ 5972, parent: 0000:00:14.0
[ 981.950143] usb usb3: calling usb_dev_resume+0x0/0x10 [usbcore] @ 5987, parent: 0000:00:14.0
[ 981.952976] snd_hda_intel 0000:00:1b.0: pci_pm_resume+0x0/0x90 returned 0 after 3794 usecs
[ 981.953003] snd_hda_codec_realtek hdaudioC1D0: calling hda_codec_pm_resume+0x0/0x20 [snd_hda_codec] @ 5981, parent: 0000:00:1b.0
[ 981.954967] mei_me 0000:00:16.0: pci_pm_resume+0x0/0x90 returned 0 after 6420 usecs
[ 981.959434] ahci 0000:00:1f.2: pci_pm_resume+0x0/0x90 returned 0 after 9877 usecs
[ 981.959506] ata2: calling ata_port_pm_resume+0x0/0x50 [libata] @ 5960, parent: 0000:00:1f.2
[ 981.959532] ata1: calling ata_port_pm_resume+0x0/0x50 [libata] @ 5970, parent: 0000:00:1f.2
[ 981.959546] ata2: ata_port_pm_resume+0x0/0x50 [libata] returned 0 after 9 usecs
[ 981.959559] ata1: ata_port_pm_resume+0x0/0x50 [libata] returned 0 after 5 usecs
[ 981.959582] scsi host1: calling scsi_bus_resume+0x0/0x20 [scsi_mod] @ 5975, parent: ata2
[ 981.959593] scsi host0: calling scsi_bus_resume+0x0/0x20 [scsi_mod] @ 5963, parent: ata1
[ 981.959614] scsi host1: scsi_bus_resume+0x0/0x20 [scsi_mod] returned 0 after 1 usecs
[ 981.959625] scsi host0: scsi_bus_resume+0x0/0x20 [scsi_mod] returned 0 after 0 usecs
[ 981.959635] scsi target1:0:0: calling scsi_bus_resume+0x0/0x20 [scsi_mod] @ 5968, parent: host1
[ 981.959656] scsi target1:0:0: scsi_bus_resume+0x0/0x20 [scsi_mod] returned 0 after 0 usecs
[ 981.959669] sd 1:0:0:0: calling scsi_bus_resume+0x0/0x20 [scsi_mod] @ 5962, parent: target1:0:0
[ 981.959692] sd 1:0:0:0: scsi_bus_resume+0x0/0x20 [scsi_mod] returned 0 after 2 usecs
[ 981.959696] sd 1:0:0:0: [sda] Starting disk
[ 981.974565] pcieport 0000:00:1c.0: pci_pm_resume+0x0/0x90 returned 0 after 24728 usecs
[ 981.974579] pcieport 0000:00:1c.3: pci_pm_resume+0x0/0x90 returned 0 after 24716 usecs
[ 981.974604] iwlwifi 0000:02:00.0: calling pci_pm_resume+0x0/0x90 @ 5964, parent: 0000:00:1c.3
[ 981.974608] sdhci-pci 0000:01:00.0: calling pci_pm_resume+0x0/0x90 @ 5967, parent: 0000:00:1c.0
[ 981.976690] iwlwifi 0000:02:00.0: reporting RF_KILL (radio enabled)
[ 981.976699] iwlwifi 0000:02:00.0: pci_pm_resume+0x0/0x90 returned 0 after 2041 usecs
[ 981.976805] ieee80211 phy0: calling wiphy_resume+0x0/0x120 [cfg80211] @ 5980, parent: 0000:02:00.0
[ 981.976849] ieee80211 phy0: wiphy_resume+0x0/0x120 [cfg80211] returned 0 after 8 usecs
[ 981.978535] ehci-pci 0000:00:1d.0: pci_pm_resume+0x0/0x90 returned 0 after 28577 usecs
[ 981.978571] usb usb1: calling usb_dev_resume+0x0/0x10 [usbcore] @ 5961, parent: 0000:00:1d.0
[ 981.978782] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 981.980977] sdhci-pci 0000:01:00.0: pci_pm_resume+0x0/0x90 returned 0 after 6215 usecs
[ 981.983803] button PNP0C0D:00: acpi_button_resume+0x0/0xa0 [button] returned 0 after 34388 usecs
[ 981.983807] button PNP0C0C:00: calling acpi_button_resume+0x0/0xa0 [button] @ 5933, parent: LNXSYBUS:00
[ 981.983810] button PNP0C0C:00: acpi_button_resume+0x0/0xa0 [button] returned 0 after 0 usecs
[ 981.983813] button PNP0C0E:00: calling acpi_button_resume+0x0/0xa0 [button] @ 5933, parent: LNXSYBUS:00
[ 981.983814] button PNP0C0E:00: acpi_button_resume+0x0/0xa0 [button] returned 0 after 0 usecs
[ 981.983817] ac ACPI0003:00: calling acpi_ac_resume+0x0/0x70 [ac] @ 5933, parent: LNXSYBUS:00
[ 981.985975] ac ACPI0003:00: acpi_ac_resume+0x0/0x70 [ac] returned 0 after 2104 usecs
[ 981.985980] battery PNP0C0A:00: calling acpi_battery_resume+0x0/0x40 [battery] @ 5933, parent: LNXSYBUS:00
[ 981.987499] battery PNP0C0A:00: acpi_battery_resume+0x0/0x40 [battery] returned 0 after 1479 usecs
[ 981.987503] dell-rbtn DELLABCE:00: calling rbtn_resume+0x0/0x30 [dell_rbtn] @ 5933, parent: LNXSYBUS:00
[ 981.987506] dell-rbtn DELLABCE:00: rbtn_resume+0x0/0x30 [dell_rbtn] returned 0 after 1 usecs
[ 981.987512] thermal LNXTHERM:00: calling acpi_thermal_resume+0x0/0x150 @ 5933, parent: LNXSYBUS:01
[ 981.987527] thermal LNXTHERM:00: acpi_thermal_resume+0x0/0x150 returned 0 after 1 usecs
[ 981.987535] thermal LNXTHERM:01: calling acpi_thermal_resume+0x0/0x150 @ 5933, parent: LNXSYBUS:01
[ 981.994210] snd_hda_codec_realtek hdaudioC1D0: hda_codec_pm_resume+0x0/0x20 [snd_hda_codec] returned 0 after 40230 usecs
[ 981.995134] thermal LNXTHERM:01: acpi_thermal_resume+0x0/0x150 returned 0 after 7416 usecs
[ 981.995141] thermal LNXTHERM:02: calling acpi_thermal_resume+0x0/0x150 @ 5933, parent: LNXSYBUS:01
[ 981.995143] thermal LNXTHERM:02: acpi_thermal_resume+0x0/0x150 returned 0 after 0 usecs
[ 981.995161] platform INT0800:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 981.995163] platform INT0800:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995165] platform PNP0103:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 981.995166] platform PNP0103:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995168] platform PNP0C09:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 981.995169] platform PNP0C09:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995172] platform ACPI000C:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.995174] platform ACPI000C:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995176] platform PNP0C0D:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.995177] platform PNP0C0D:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995179] platform PNP0C0C:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.995180] platform PNP0C0C:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995182] platform PNP0C0E:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.995183] platform PNP0C0E:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995185] platform ACPI0003:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.995186] platform ACPI0003:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995188] platform PNP0C0A:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.995201] platform PNP0C0A:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995203] platform DELLABCE:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.995204] platform DELLABCE:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995206] platform INT340F:00: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.995207] platform INT340F:00: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.995211] acpi-fan PNP0C0B:00: calling acpi_fan_resume+0x0/0x50 [fan] @ 5933, parent: platform
[ 981.995705] acpi-fan PNP0C0B:00: acpi_fan_resume+0x0/0x50 [fan] returned 0 after 479 usecs
[ 981.995708] acpi-fan PNP0C0B:01: calling acpi_fan_resume+0x0/0x50 [fan] @ 5933, parent: platform
[ 981.996431] acpi-fan PNP0C0B:01: acpi_fan_resume+0x0/0x50 [fan] returned 0 after 691 usecs
[ 981.996434] acpi-fan PNP0C0B:02: calling acpi_fan_resume+0x0/0x50 [fan] @ 5933, parent: platform
[ 981.996965] acpi-fan PNP0C0B:02: acpi_fan_resume+0x0/0x50 [fan] returned 0 after 515 usecs
[ 981.996968] acpi-fan PNP0C0B:03: calling acpi_fan_resume+0x0/0x50 [fan] @ 5933, parent: platform
[ 981.997700] acpi-fan PNP0C0B:03: acpi_fan_resume+0x0/0x50 [fan] returned 0 after 700 usecs
[ 981.997703] acpi-fan PNP0C0B:04: calling acpi_fan_resume+0x0/0x50 [fan] @ 5933, parent: platform
[ 981.998316] acpi-fan PNP0C0B:04: acpi_fan_resume+0x0/0x50 [fan] returned 0 after 583 usecs
[ 981.998320] button LNXPWRBN:00: calling acpi_button_resume+0x0/0xa0 [button] @ 5933, parent: LNXSYSTM:00
[ 981.998323] button LNXPWRBN:00: acpi_button_resume+0x0/0xa0 [button] returned 0 after 0 usecs
[ 981.998329] system 00:00: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998331] system 00:00: pnp_bus_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.998335] rtc_cmos 00:01: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998338] rtc_cmos 00:01: pnp_bus_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.998340] system 00:02: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998342] system 00:02: pnp_bus_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.998345] i8042 kbd 00:03: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998358] i8042 kbd 00:03: pnp_bus_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.998361] i8042 aux 00:04: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998363] i8042 aux 00:04: pnp_bus_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.998365] pnp 00:05: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998368] pnp 00:05: pnp_bus_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.998370] system 00:06: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998373] system 00:06: pnp_bus_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.998375] system 00:07: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998377] system 00:07: pnp_bus_resume+0x0/0x90 returned 0 after 0 usecs
[ 981.998380] tpm_tis 00:08: calling pnp_bus_resume+0x0/0x90 @ 5933, parent: pnp0
[ 981.998440] tpm tpm0: tpm_try_transmit: send(): error -5
[ 981.998443] tpm_tis 00:08: pnp_bus_resume+0x0/0x90 returned 0 after 59 usecs
[ 981.998463] pcspkr pcspkr: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.998464] pcspkr pcspkr: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.998466] efi-framebuffer efi-framebuffer.0: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.998468] efi-framebuffer efi-framebuffer.0: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.998482] alarmtimer alarmtimer: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.998484] alarmtimer alarmtimer: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.998491] serial8250 serial8250: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.998493] serial8250 serial8250: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.998496] i8042 i8042: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.999239] i8042 i8042: platform_pm_resume+0x0/0x40 returned 0 after 724 usecs
[ 981.999244] atkbd serio0: calling serio_resume+0x0/0x90 @ 5933, parent: i8042
[ 981.999248] atkbd serio0: serio_resume+0x0/0x90 returned 0 after 2 usecs
[ 981.999392] psmouse serio1: calling serio_resume+0x0/0x90 @ 5933, parent: i8042
[ 981.999397] psmouse serio1: serio_resume+0x0/0x90 returned 0 after 2 usecs
[ 981.999521] rtc rtc0: calling rtc_resume+0x0/0x60 @ 5933, parent: 00:01
[ 981.999524] rtc rtc0: rtc_resume+0x0/0x60 returned 0 after 0 usecs
[ 981.999529] platform efivars.0: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.999531] platform efivars.0: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999534] input input0: calling input_dev_resume+0x0/0x40 @ 5933, parent: serio0
[ 981.999537] input input0: input_dev_resume+0x0/0x40 returned 0 after 1 usecs
[ 981.999539] leds input0::numlock: calling led_resume+0x0/0x20 @ 5933, parent: input0
[ 981.999540] leds input0::numlock: led_resume+0x0/0x20 returned 0 after 0 usecs
[ 981.999554] leds input0::capslock: calling led_resume+0x0/0x20 @ 5933, parent: input0
[ 981.999556] leds input0::capslock: led_resume+0x0/0x20 returned 0 after 0 usecs
[ 981.999559] leds input0::scrolllock: calling led_resume+0x0/0x20 @ 5933, parent: input0
[ 981.999561] leds input0::scrolllock: led_resume+0x0/0x20 returned 0 after 0 usecs
[ 981.999565] platform microcode: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.999568] platform microcode: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999606] input input2: calling input_dev_resume+0x0/0x40 @ 5933, parent: serio1
[ 981.999609] input input2: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999614] input input3: calling input_dev_resume+0x0/0x40 @ 5933, parent: PNP0C0D:00
[ 981.999617] input input3: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999621] input input4: calling input_dev_resume+0x0/0x40 @ 5933, parent: PNP0C0C:00
[ 981.999623] input input4: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999638] input input5: calling input_dev_resume+0x0/0x40 @ 5933, parent: PNP0C0E:00
[ 981.999641] input input5: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999644] input input6: calling input_dev_resume+0x0/0x40 @ 5933, parent: LNXPWRBN:00
[ 981.999647] input input6: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999651] input input7: calling input_dev_resume+0x0/0x40 @ 5933, parent: none
[ 981.999653] input input7: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999659] iTCO_wdt iTCO_wdt.0.auto: calling platform_pm_resume+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 981.999660] iTCO_wdt iTCO_wdt.0.auto: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999662] platform intel-spi: calling platform_pm_resume+0x0/0x40 @ 5933, parent: 0000:00:1f.0
[ 981.999664] platform intel-spi: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999678] platform regulatory.0: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.999680] platform regulatory.0: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999682] input input8: calling input_dev_resume+0x0/0x40 @ 5933, parent: pcspkr
[ 981.999702] input input8: input_dev_resume+0x0/0x40 returned 0 after 16 usecs
[ 981.999719] leds mmc0::: calling led_resume+0x0/0x20 @ 5933, parent: 0000:01:00.0
[ 981.999721] leds mmc0::: led_resume+0x0/0x20 returned 0 after 0 usecs
[ 981.999727] dcdbas dcdbas: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.999728] dcdbas dcdbas: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999731] dell-smbios dell-smbios.0: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.999733] dell-smbios dell-smbios.0: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999735] dell-smbios dell-smbios.1: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.999736] dell-smbios dell-smbios.1: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999738] dell-laptop dell-laptop: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 981.999740] dell-laptop dell-laptop: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 981.999743] rfkill rfkill0: calling rfkill_resume+0x0/0x60 [rfkill] @ 5933, parent: dell-laptop
[ 982.010795] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[ 982.010797] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled)
[ 982.011877] rfkill rfkill0: rfkill_resume+0x0/0x60 [rfkill] returned 0 after 11843 usecs
[ 982.056076] usb usb3: usb_dev_resume+0x0/0x10 [usbcore] returned 0 after 103406 usecs
[ 982.056520] usb usb2: usb_dev_resume+0x0/0x10 [usbcore] returned 0 after 103861 usecs
[ 982.095774] usb usb1: usb_dev_resume+0x0/0x10 [usbcore] returned 0 after 114431 usecs
[ 982.095830] usb 1-1: calling usb_dev_resume+0x0/0x10 [usbcore] @ 5957, parent: usb1
[ 982.227852] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 982.274917] ata1: SATA link down (SStatus 0 SControl 300)
[ 982.274951] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 982.277322] ata2.00: NCQ Send/Recv Log not supported
[ 982.277627] probe of mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02 returned -517 after 0 usecs
[ 982.277974] ata2.00: NCQ Send/Recv Log not supported
[ 982.278032] ata2.00: configured for UDMA/133
[ 982.283954] e1000e 0000:00:19.0: pci_pm_resume+0x0/0x90 returned 0 after 327053 usecs
[ 982.482533] i915 0000:00:02.0: pci_pm_resume+0x0/0x90 returned 0 after 521632 usecs
[ 982.482583] snd_hda_intel 0000:00:03.0: calling pci_pm_resume+0x0/0x90 @ 5990, parent: pci0000:00
[ 982.482624] backlight intel_backlight: calling backlight_resume+0x0/0x80 @ 5933, parent: card0-eDP-1
[ 982.482633] backlight intel_backlight: backlight_resume+0x0/0x80 returned 0 after 0 usecs
[ 982.482663] input input13: calling input_dev_resume+0x0/0x40 @ 5933, parent: LNXVIDEO:00
[ 982.482670] input input13: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.482695] input input9: calling input_dev_resume+0x0/0x40 @ 5933, parent: card1
[ 982.482712] input input9: input_dev_resume+0x0/0x40 returned 0 after 10 usecs
[ 982.482719] input input10: calling input_dev_resume+0x0/0x40 @ 5933, parent: card1
[ 982.482738] input input10: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.482745] input input11: calling input_dev_resume+0x0/0x40 @ 5933, parent: card1
[ 982.482750] input input11: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.482757] input input12: calling input_dev_resume+0x0/0x40 @ 5933, parent: card1
[ 982.482762] input input12: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.482791] rfkill rfkill1: calling rfkill_resume+0x0/0x60 [rfkill] @ 5933, parent: dell-laptop
[ 982.485013] snd_hda_intel 0000:00:03.0: pci_pm_resume+0x0/0x90 returned 0 after 2343 usecs
[ 982.485144] snd_hda_codec_hdmi hdaudioC0D0: calling hda_codec_pm_resume+0x0/0x20 [snd_hda_codec] @ 5996, parent: 0000:00:03.0
[ 982.485183] snd_hda_codec_hdmi hdaudioC0D0: hda_codec_pm_resume+0x0/0x20 [snd_hda_codec] returned 0 after 1 usecs
[ 982.503812] rfkill rfkill1: rfkill_resume+0x0/0x60 [rfkill] returned 0 after 20523 usecs
[ 982.503818] leds dell::kbd_backlight: calling led_resume+0x0/0x20 @ 5933, parent: dell-laptop
[ 982.503831] leds dell::kbd_backlight: led_resume+0x0/0x20 returned 0 after 0 usecs
[ 982.503834] input input14: calling input_dev_resume+0x0/0x40 @ 5933, parent: 9DBB5994-A997-11DA-B012-B622A1EF5492
[ 982.503836] input input14: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.503839] leds phy0-led: calling led_resume+0x0/0x20 @ 5933, parent: 0000:02:00.0
[ 982.503840] leds phy0-led: led_resume+0x0/0x20 returned 0 after 0 usecs
[ 982.503842] leds platform::micmute: calling led_resume+0x0/0x20 @ 5933, parent: dell-laptop
[ 982.503843] leds platform::micmute: led_resume+0x0/0x20 returned 0 after 0 usecs
[ 982.503847] rfkill rfkill2: calling rfkill_resume+0x0/0x60 [rfkill] @ 5933, parent: phy0
[ 982.503851] rfkill rfkill2: rfkill_resume+0x0/0x60 [rfkill] returned 0 after 1 usecs
[ 982.503855] coretemp coretemp.0: calling platform_pm_resume+0x0/0x40 @ 5933, parent: platform
[ 982.503856] coretemp coretemp.0: platform_pm_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.607781] usb 1-1: usb_dev_resume+0x0/0x10 [usbcore] returned 0 after 499940 usecs
[ 982.607821] usb 1-1.6: calling usb_dev_resume+0x0/0x10 [usbcore] @ 5941, parent: 1-1
[ 982.607840] usb 1-1.3: calling usb_dev_resume+0x0/0x10 [usbcore] @ 5943, parent: 1-1
[ 982.687828] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
[ 982.837164] usb 1-1.6: usb_dev_resume+0x0/0x10 [usbcore] returned 0 after 223933 usecs
[ 982.875848] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
[ 982.986216] usb 1-1.3: usb_dev_resume+0x0/0x10 [usbcore] returned 0 after 369478 usecs
[ 982.986304] input input15: calling input_dev_resume+0x0/0x40 @ 5933, parent: 1-1.6:1.0
[ 982.986309] input input15: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.986325] input input16: calling input_dev_resume+0x0/0x40 @ 5933, parent: card0
[ 982.986329] input input16: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.986333] input input17: calling input_dev_resume+0x0/0x40 @ 5933, parent: card0
[ 982.986337] input input17: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.986341] input input18: calling input_dev_resume+0x0/0x40 @ 5933, parent: card0
[ 982.986345] input input18: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.986349] input input19: calling input_dev_resume+0x0/0x40 @ 5933, parent: card0
[ 982.986353] input input19: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.986357] input input20: calling input_dev_resume+0x0/0x40 @ 5933, parent: card0
[ 982.986369] input input20: input_dev_resume+0x0/0x40 returned 0 after 0 usecs
[ 982.986418] probe of 1-1.3:1.0 returned -517 after 0 usecs
[ 982.986422] probe of 1-1.3:1.1 returned -517 after 0 usecs
[ 982.987093] OOM killer enabled.
[ 982.987094] Restarting tasks ...
[ 982.989902] pci_bus 0000:01: Allocating resources
[ 982.991938] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 982.991943] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 982.991959] pci_bus 0000:02: Allocating resources
[ 982.992257] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 982.992260] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 982.992282] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
[ 982.992298] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref]
[ 982.992302] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 982.992304] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
[ 982.992615] pci_bus 0000:01: Allocating resources
[ 982.994406] pci_bus 0000:02: Allocating resources
[ 982.995741] probe of mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02 returned 1 after 8845 usecs
[ 982.997787] probe of 1-1.3:1.0 returned 1 after 2034 usecs
[ 983.004214] pci_bus 0000:01: Allocating resources
[ 983.006009] pci_bus 0000:02: Allocating resources
[ 983.007093] done.
[ 983.009947] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 983.009951] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 983.024223] acpi PNP0401:00: Already enumerated
[ 983.028375] acpi PNP0501:00: Still not present
[ 983.031795] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 983.078041] PM: suspend exit
[ 983.315937] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 983.332956] Bluetooth: hci0: Intel firmware patch completed and activated
[ 983.538707] e1000e: eno1 NIC Link is Down
[ 2027.127428] calling msr_init+0x0/0x1000 [msr] @ 6294
[ 2027.131123] initcall msr_init+0x0/0x1000 [msr] returned 0 after 3599 usecs
[ 2027.170589] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2027.170600] #PF: supervisor instruction fetch in kernel mode
[ 2027.170604] #PF: error_code(0x0010) - not-present page
[ 2027.170609] PGD 0 P4D 0
[ 2027.170619] Oops: 0010 [#1] SMP PTI
[ 2027.170628] CPU: 0 PID: 6290 Comm: powertop Not tainted 5.2.0-2-amd64 #1 Debian 5.2.7-1
[ 2027.170632] Hardware name: Dell Inc. Latitude E7250/0TVD2T, BIOS A19 01/23/2018
[ 2027.170640] RIP: 0010:0x0
[ 2027.170653] Code: Bad RIP value.
[ 2027.170660] RSP: 0018:ffffb1a943543cd8 EFLAGS: 00010246
[ 2027.170666] RAX: 0000000000000000 RBX: ffff95c66adc1b00 RCX: 0000000000000001
[ 2027.170672] RDX: ffff95c68ad50600 RSI: ffff95c66adc1b00 RDI: ffff95c68d320de0
[ 2027.170678] RBP: ffff95c68d320de0 R08: 0000000000000000 R09: 0000000000000000
[ 2027.170683] R10: ffff95c68d2d6f00 R11: 0000000000000000 R12: ffff95c66adc1b10
[ 2027.170689] R13: ffffffff8851cdd0 R14: 0000000000000000 R15: ffff95c66adc1b00
[ 2027.170698] FS: 00007f2933119740(0000) GS:ffff95c68da00000(0000) knlGS:0000000000000000
[ 2027.170703] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2027.170710] CR2: ffffffffffffffd6 CR3: 00000003d7b44006 CR4: 00000000003606f0
[ 2027.170714] Call Trace:
[ 2027.170730] do_dentry_open+0x13a/0x370
[ 2027.170745] path_openat+0x2c6/0x1480
[ 2027.170757] ? terminate_walk+0xe6/0x100
[ 2027.170767] ? path_lookupat.isra.48+0xa3/0x220
[ 2027.170779] ? reuse_swap_page+0x105/0x320
[ 2027.170791] do_filp_open+0x93/0x100
[ 2027.170804] ? __check_object_size+0x15d/0x189
[ 2027.170816] do_sys_open+0x184/0x220
[ 2027.170828] do_syscall_64+0x53/0x130
[ 2027.170837] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2027.170844] RIP: 0033:0x7f29332771ae
[ 2027.170850] Code: 25 00 00 41 00 3d 00 00 41 00 74 48 48 8d 05 59 65 0d 00 8b 00 85 c0 75 69 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a6 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
[ 2027.170856] RSP: 002b:00007fffda995f10 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[ 2027.170863] RAX: ffffffffffffffda RBX: 00005608e822f870 RCX: 00007f29332771ae
[ 2027.170868] RDX: 0000000000000000 RSI: 00007fffda9972b0 RDI: 00000000ffffff9c
[ 2027.170872] RBP: 0000000000000008 R08: 0000000000000008 R09: 0000000000000001
[ 2027.170878] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293368d805
[ 2027.170883] R13: 00007f293368d805 R14: 0000000000000001 R15: 00005608e7d9afd0
[ 2027.170891] Modules linked in: msr snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media btusb btrtl btbcm btintel bluetooth ecdh_generic ecc binfmt_misc nls_ascii nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel arc4 mei_wdt iTCO_wdt kvm iTCO_vendor_support watchdog wmi_bmof dell_wmi sparse_keymap irqbypass ppdev iwlmvm dell_laptop crct10dif_pclmul dell_smbios crc32_pclmul dell_wmi_descriptor dcdbas snd_hda_codec_realtek snd_hda_codec_generic dell_smm_hwmon mac80211 ghash_clmulni_intel ledtrig_audio i915 intel_cstate snd_hda_intel intel_uncore intel_rapl_perf drm_kms_helper snd_hda_codec xhci_pci iwlwifi ehci_pci sdhci_pci xhci_hcd ehci_hcd snd_hda_core cqhci efi_pstore sdhci pcspkr snd_hwdep mei_me joydev e1000e mmc_core sg mei snd_pcm usbcore processor_thermal_device tpm_tis cfg80211 efivars drm tpm_tis_core intel_soc_dts_iosf snd_timer i2c_i801 snd lpc_ich soundcore mfd_core usb_common
[ 2027.171003] i2c_algo_bit tpm rng_core battery wmi parport_pc parport int3403_thermal pcc_cpufreq video ac int3402_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel dell_rbtn rfkill button acpi_pad efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic algif_skcipher af_alg dm_crypt dm_mod sd_mod crc32c_intel ahci libahci aesni_intel libata aes_x86_64 glue_helper crypto_simd scsi_mod psmouse cryptd evdev serio_raw fan
[ 2027.171071] CR2: 0000000000000000
[ 2027.171079] ---[ end trace fba28f1c98c90aac ]---
[ 2028.530750] i915 0000:00:02.0: Failed to idle engines, declaring wedged!
[ 2029.198236] RIP: 0010:0x0
[ 2029.198246] Code: Bad RIP value.
[ 2029.198249] RSP: 0018:ffffb1a943543cd8 EFLAGS: 00010246
[ 2029.198253] RAX: 0000000000000000 RBX: ffff95c66adc1b00 RCX: 0000000000000001
[ 2029.198255] RDX: ffff95c68ad50600 RSI: ffff95c66adc1b00 RDI: ffff95c68d320de0
[ 2029.198257] RBP: ffff95c68d320de0 R08: 0000000000000000 R09: 0000000000000000
[ 2029.198259] R10: ffff95c68d2d6f00 R11: 0000000000000000 R12: ffff95c66adc1b10
[ 2029.198261] R13: ffffffff8851cdd0 R14: 0000000000000000 R15: ffff95c66adc1b00
[ 2029.198264] FS: 00007f2933119740(0000) GS:ffff95c68da00000(0000) knlGS:0000000000000000
[ 2029.198266] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2029.198268] CR2: ffffffffffffffd6 CR3: 00000003d7b44006 CR4: 00000000003606f0
[ 2029.255445] rfkill: input handler enabled
[ 2037.093000] rfkill: input handler disabled
[ 2042.552216] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2042.552219] #PF: supervisor instruction fetch in kernel mode
[ 2042.552220] #PF: error_code(0x0010) - not-present page
[ 2042.552221] PGD 0 P4D 0
[ 2042.552223] Oops: 0010 [#2] SMP PTI
[ 2042.552225] CPU: 2 PID: 6883 Comm: powertop Tainted: G D 5.2.0-2-amd64 #1 Debian 5.2.7-1
[ 2042.552226] Hardware name: Dell Inc. Latitude E7250/0TVD2T, BIOS A19 01/23/2018
[ 2042.552228] RIP: 0010:0x0
[ 2042.552230] Code: Bad RIP value.
[ 2042.552231] RSP: 0018:ffffb1a94815fcd8 EFLAGS: 00010246
[ 2042.552232] RAX: 0000000000000000 RBX: ffff95c62e77fb00 RCX: 0000000000000001
[ 2042.552233] RDX: ffff95c68ad50600 RSI: ffff95c62e77fb00 RDI: ffff95c68d320de0
[ 2042.552234] RBP: ffff95c68d320de0 R08: 0000000000000000 R09: 0000000000000000
[ 2042.552235] R10: ffff95c68d2d6f00 R11: 0000000000000000 R12: ffff95c62e77fb10
[ 2042.552235] R13: ffffffff8851cdd0 R14: 0000000000000000 R15: ffff95c62e77fb00
[ 2042.552236] FS: 00007f438ebb2740(0000) GS:ffff95c68db00000(0000) knlGS:0000000000000000
[ 2042.552237] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2042.552238] CR2: ffffffffffffffd6 CR3: 00000003e4dfc002 CR4: 00000000003606e0
[ 2042.552239] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2042.552240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2042.552240] Call Trace:
[ 2042.552244] do_dentry_open+0x13a/0x370
[ 2042.552248] path_openat+0x2c6/0x1480
[ 2042.552250] ? terminate_walk+0xe6/0x100
[ 2042.552251] ? path_lookupat.isra.48+0xa3/0x220
[ 2042.552253] ? reuse_swap_page+0x105/0x320
[ 2042.552255] do_filp_open+0x93/0x100
[ 2042.552257] ? __check_object_size+0x15d/0x189
[ 2042.552260] do_sys_open+0x184/0x220
[ 2042.552262] do_syscall_64+0x53/0x130
[ 2042.552265] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2042.552266] RIP: 0033:0x7f438ed101ae
[ 2042.552268] Code: 25 00 00 41 00 3d 00 00 41 00 74 48 48 8d 05 59 65 0d 00 8b 00 85 c0 75 69 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a6 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
[ 2042.552269] RSP: 002b:00007ffd324ae9d0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[ 2042.552270] RAX: ffffffffffffffda RBX: 0000557124829870 RCX: 00007f438ed101ae
[ 2042.552271] RDX: 0000000000000000 RSI: 00007ffd324afd70 RDI: 00000000ffffff9c
[ 2042.552271] RBP: 0000000000000008 R08: 0000000000000008 R09: 0000000000000001
[ 2042.552272] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f438f126805
[ 2042.552273] R13: 00007f438f126805 R14: 0000000000000001 R15: 0000557124293fd0
[ 2042.552274] Modules linked in: msr snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media btusb btrtl btbcm btintel bluetooth ecdh_generic ecc binfmt_misc nls_ascii nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel arc4 mei_wdt iTCO_wdt kvm iTCO_vendor_support watchdog wmi_bmof dell_wmi sparse_keymap irqbypass ppdev iwlmvm dell_laptop crct10dif_pclmul dell_smbios crc32_pclmul dell_wmi_descriptor dcdbas snd_hda_codec_realtek snd_hda_codec_generic dell_smm_hwmon mac80211 ghash_clmulni_intel ledtrig_audio i915 intel_cstate snd_hda_intel intel_uncore intel_rapl_perf drm_kms_helper snd_hda_codec xhci_pci iwlwifi ehci_pci sdhci_pci xhci_hcd ehci_hcd snd_hda_core cqhci efi_pstore sdhci pcspkr snd_hwdep mei_me joydev e1000e mmc_core sg mei snd_pcm usbcore processor_thermal_device tpm_tis cfg80211 efivars drm tpm_tis_core intel_soc_dts_iosf snd_timer i2c_i801 snd lpc_ich soundcore mfd_core usb_common
[ 2042.552299] i2c_algo_bit tpm rng_core battery wmi parport_pc parport int3403_thermal pcc_cpufreq video ac int3402_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel dell_rbtn rfkill button acpi_pad efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic algif_skcipher af_alg dm_crypt dm_mod sd_mod crc32c_intel ahci libahci aesni_intel libata aes_x86_64 glue_helper crypto_simd scsi_mod psmouse cryptd evdev serio_raw fan
[ 2042.552313] CR2: 0000000000000000
[ 2042.552315] ---[ end trace fba28f1c98c90aad ]---
[ 2044.057566] RIP: 0010:0x0
[ 2044.057578] Code: Bad RIP value.
[ 2044.057580] RSP: 0018:ffffb1a943543cd8 EFLAGS: 00010246
[ 2044.057583] RAX: 0000000000000000 RBX: ffff95c66adc1b00 RCX: 0000000000000001
[ 2044.057584] RDX: ffff95c68ad50600 RSI: ffff95c66adc1b00 RDI: ffff95c68d320de0
[ 2044.057586] RBP: ffff95c68d320de0 R08: 0000000000000000 R09: 0000000000000000
[ 2044.057588] R10: ffff95c68d2d6f00 R11: 0000000000000000 R12: ffff95c66adc1b10
[ 2044.057590] R13: ffffffff8851cdd0 R14: 0000000000000000 R15: ffff95c66adc1b00
[ 2044.057592] FS: 00007f438ebb2740(0000) GS:ffff95c68db00000(0000) knlGS:0000000000000000
[ 2044.057594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2044.057595] CR2: ffffffffffffffd6 CR3: 00000003e4dfc002 CR4: 00000000003606e0
[ 2044.057597] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2044.057598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.7] powertop --auto-tune: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-10 16:33 [Linux 5.2.7] powertop --auto-tune: BUG: kernel NULL pointer dereference, address: 0000000000000000 Paul Menzel
@ 2019-08-10 17:31 ` Thomas Gleixner
2019-08-10 18:28 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Thomas Gleixner @ 2019-08-10 17:31 UTC (permalink / raw)
To: Paul Menzel; +Cc: x86, LKML
Paul,
On Sat, 10 Aug 2019, Paul Menzel wrote:
>
> I have no idea, who to report this to, so I please refer me to the correct
> list.
I have no idea yet either :)
> With Linux 5.2.7 from Debian Sid/unstable and PowerTOP 2.10, executing
>
> sudo powertop --auto-tune
>
> causes a NULL pointer dereference, and the graphical session crashes due to an
> effect on the i915 driver. It worked in the past with the 4.19 series from
> Debian.
>
> Here is the trace, and please find all Linux kernel logs attached.
>
> > [ 2027.170589] BUG: kernel NULL pointer dereference, address:
> > 0000000000000000
> > [ 2027.170600] #PF: supervisor instruction fetch in kernel mode
> > [ 2027.170604] #PF: error_code(0x0010) - not-present page
> > [ 2027.170609] PGD 0 P4D 0 [ 2027.170619] Oops: 0010 [#1] SMP PTI
...
> > [ 2027.170730] do_dentry_open+0x13a/0x370
If you have compiled with debug info, please decode the line:
linux/scripts/faddr2line vmlinux do_dentry_open+0x13a/0x370
That gives us the fops pointer which is NULL.
> > [ 2027.170745] path_openat+0x2c6/0x1480
> > [ 2027.170757] ? terminate_walk+0xe6/0x100
> > [ 2027.170767] ? path_lookupat.isra.48+0xa3/0x220
> > [ 2027.170779] ? reuse_swap_page+0x105/0x320
> > [ 2027.170791] do_filp_open+0x93/0x100
> > [ 2027.170804] ? __check_object_size+0x15d/0x189
> > [ 2027.170816] do_sys_open+0x184/0x220
> > [ 2027.170828] do_syscall_64+0x53/0x130
> > [ 2027.170837] entry_SYSCALL_64_after_hwframe+0x44/0xa9
That's an open crashing. We just don't know which file. Is the machine
completely hosed after that or is it just the graphics stuff dying?
If it's not completely dead then instead of running it from your graphical
desktop you could switch to a VGA terminal Alt+Ctrl+F1 (or whatever
function key your distro maps to) after boot and run powertop with strace
from there:
strace -f -o xxx.log powertop
With a bit of luck xxx.log should contain the information about the file it
tries to open.
Alternatively if you have a serial console you can enable the
sys_enter_open* tracepoints:
# echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_open
# echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Either add 'ftrace_dump_on_oops' to the kernel command line or enable it
from the shell:
# echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
Then run powertop. After the crash it will take some time to spill out the
trace buffer over serial, but it will pinpoint the offending file.
Once we know which file it is, we also know who needs to stare at it :)
Thanks,
tglx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.7] powertop --auto-tune: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-10 17:31 ` Thomas Gleixner
@ 2019-08-10 18:28 ` Paul Menzel
2019-08-10 21:11 ` [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: " Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2019-08-10 18:28 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: x86, LKML
[-- Attachment #1: Type: text/plain, Size: 3299 bytes --]
Dear Thomas,
On 10.08.19 19:31, Thomas Gleixner wrote:
> On Sat, 10 Aug 2019, Paul Menzel wrote:
>>
>> I have no idea, who to report this to, so I please refer me to the correct
>> list.
>
> I have no idea yet either :)
>
>> With Linux 5.2.7 from Debian Sid/unstable and PowerTOP 2.10, executing
>>
>> sudo powertop --auto-tune
>>
>> causes a NULL pointer dereference, and the graphical session crashes due to an
>> effect on the i915 driver. It worked in the past with the 4.19 series from
>> Debian.
>>
>> Here is the trace, and please find all Linux kernel logs attached.
>>
>>> [ 2027.170589] BUG: kernel NULL pointer dereference, address:
>>> 0000000000000000
>>> [ 2027.170600] #PF: supervisor instruction fetch in kernel mode
>>> [ 2027.170604] #PF: error_code(0x0010) - not-present page
>>> [ 2027.170609] PGD 0 P4D 0 [ 2027.170619] Oops: 0010 [#1] SMP PTI
> ...
>>> [ 2027.170730] do_dentry_open+0x13a/0x370
>
> If you have compiled with debug info, please decode the line:
>
> linux/scripts/faddr2line vmlinux do_dentry_open+0x13a/0x370
>
> That gives us the fops pointer which is NULL.
Hah, luckily it’s reproducible.
```
$ scripts/faddr2line /usr/lib/debug/boot/vmlinux-5.2.0-2-amd64
do_dentry_open+0x13a/0x370
do_dentry_open+0x13a/0x370:
do_dentry_open at fs/open.c:799
```
>>> [ 2027.170745] path_openat+0x2c6/0x1480
>>> [ 2027.170757] ? terminate_walk+0xe6/0x100
>>> [ 2027.170767] ? path_lookupat.isra.48+0xa3/0x220
>>> [ 2027.170779] ? reuse_swap_page+0x105/0x320
>>> [ 2027.170791] do_filp_open+0x93/0x100
>>> [ 2027.170804] ? __check_object_size+0x15d/0x189
>>> [ 2027.170816] do_sys_open+0x184/0x220
>>> [ 2027.170828] do_syscall_64+0x53/0x130
>>> [ 2027.170837] entry_SYSCALL_64_after_hwframe+0x44/0xa9
>
> That's an open crashing. We just don't know which file. Is the machine
> completely hosed after that or is it just the graphics stuff dying?
No, the graphical login manager showed up, and I could log back in, and
continue using hte machine.
> If it's not completely dead then instead of running it from your graphical
> desktop you could switch to a VGA terminal Alt+Ctrl+F1 (or whatever
> function key your distro maps to) after boot and run powertop with strace
> from there:
>
> strace -f -o xxx.log powertop
>
> With a bit of luck xxx.log should contain the information about the file it
> tries to open.
```
2157 access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK) = 0
2157 openat(AT_FDCWD,
"/sys/kernel/debug/tracing/events/power/cpu_idle/id", O_RDONLY) = ?
2157 +++ killed by SIGKILL +++
```
> Alternatively if you have a serial console you can enable the
> sys_enter_open* tracepoints:
>
> # echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_open
> # echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
>
> Either add 'ftrace_dump_on_oops' to the kernel command line or enable it
> from the shell:
>
> # echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
>
> Then run powertop. After the crash it will take some time to spill out the
> trace buffer over serial, but it will pinpoint the offending file.
I do not have serial console on this device.
> Once we know which file it is, we also know who needs to stare at it :)
Hopefully the information is enough.
Kind regards,
Paul
[-- Attachment #2: powertop-strace.txt --]
[-- Type: text/plain, Size: 63198 bytes --]
2157 execve("/usr/sbin/powertop", ["powertop", "--auto-tune"], 0x7fff065d2f00 /* 15 vars */) = 0
2157 brk(NULL) = 0x564ce8eef000
2157 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=152042, ...}) = 0
2157 mmap(NULL, 152042, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f98a98fd000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libnl-genl-3.so.200", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240$\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=23976, ...}) = 0
2157 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f98a98fb000
2157 mmap(NULL, 2119112, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a96f5000
2157 mprotect(0x7f98a96fa000, 2093056, PROT_NONE) = 0
2157 mmap(0x7f98a98f9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f98a98f9000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libnl-3.so.200", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20\215\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=135064, ...}) = 0
2157 mmap(NULL, 2230576, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a94d4000
2157 mprotect(0x7f98a94f3000, 2093056, PROT_NONE) = 0
2157 mmap(0x7f98a96f2000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e000) = 0x7f98a96f2000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libncursesw.so.6", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\242\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=235440, ...}) = 0
2157 mmap(NULL, 238008, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a9499000
2157 mmap(0x7f98a94a2000, 159744, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x7f98a94a2000
2157 mmap(0x7f98a94c9000, 36864, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x30000) = 0x7f98a94c9000
2157 mmap(0x7f98a94d2000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x38000) = 0x7f98a94d2000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libtinfo.so.6", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\351\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=191872, ...}) = 0
2157 mmap(NULL, 194944, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a9469000
2157 mmap(0x7f98a9477000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x7f98a9477000
2157 mmap(0x7f98a9486000, 57344, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1d000) = 0x7f98a9486000
2157 mmap(0x7f98a9494000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2a000) = 0x7f98a9494000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libpci.so.3", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P5\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=60024, ...}) = 0
2157 mmap(NULL, 62096, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a9459000
2157 mprotect(0x7f98a945c000, 45056, PROT_NONE) = 0
2157 mmap(0x7f98a945c000, 28672, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f98a945c000
2157 mmap(0x7f98a9463000, 12288, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa000) = 0x7f98a9463000
2157 mmap(0x7f98a9467000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd000) = 0x7f98a9467000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@\217\t\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=1915688, ...}) = 0
2157 mmap(NULL, 1930656, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a9281000
2157 mmap(0x7f98a9316000, 950272, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x95000) = 0x7f98a9316000
2157 mmap(0x7f98a93fe000, 303104, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17d000) = 0x7f98a93fe000
2157 mmap(0x7f98a9448000, 57344, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1c6000) = 0x7f98a9448000
2157 mmap(0x7f98a9456000, 9632, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f98a9456000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\322\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=1579448, ...}) = 0
2157 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f98a927f000
2157 mmap(NULL, 1581384, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a90fc000
2157 mmap(0x7f98a9109000, 651264, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd000) = 0x7f98a9109000
2157 mmap(0x7f98a91a8000, 872448, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xac000) = 0x7f98a91a8000
2157 mmap(0x7f98a927d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x180000) = 0x7f98a927d000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0203\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=100736, ...}) = 0
2157 mmap(NULL, 103504, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a90e2000
2157 mmap(0x7f98a90e5000, 69632, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f98a90e5000
2157 mmap(0x7f98a90f6000, 16384, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7f98a90f6000
2157 mmap(0x7f98a90fa000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f98a90fa000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@l\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0755, st_size=146968, ...}) = 0
2157 mmap(NULL, 132288, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a90c1000
2157 mmap(0x7f98a90c7000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f98a90c7000
2157 mmap(0x7f98a90d6000, 24576, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f98a90d6000
2157 mmap(0x7f98a90dc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f98a90dc000
2157 mmap(0x7f98a90de000, 13504, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f98a90de000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260A\2\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0755, st_size=1824496, ...}) = 0
2157 mmap(NULL, 1837056, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a8f00000
2157 mprotect(0x7f98a8f22000, 1658880, PROT_NONE) = 0
2157 mmap(0x7f98a8f22000, 1343488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7f98a8f22000
2157 mmap(0x7f98a906a000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16a000) = 0x7f98a906a000
2157 mmap(0x7f98a90b7000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b6000) = 0x7f98a90b7000
2157 mmap(0x7f98a90bd000, 14336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f98a90bd000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\21\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=14592, ...}) = 0
2157 mmap(NULL, 16656, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a8efb000
2157 mmap(0x7f98a8efc000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7f98a8efc000
2157 mmap(0x7f98a8efd000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f98a8efd000
2157 mmap(0x7f98a8efe000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f98a8efe000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0203\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=113088, ...}) = 0
2157 mmap(NULL, 115088, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a8ede000
2157 mprotect(0x7f98a8ee1000, 98304, PROT_NONE) = 0
2157 mmap(0x7f98a8ee1000, 69632, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f98a8ee1000
2157 mmap(0x7f98a8ef2000, 24576, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7f98a8ef2000
2157 mmap(0x7f98a8ef9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f98a8ef9000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libresolv.so.2", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240C\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=93000, ...}) = 0
2157 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f98a8edc000
2157 mmap(NULL, 105088, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a8ec2000
2157 mprotect(0x7f98a8ec6000, 73728, PROT_NONE) = 0
2157 mmap(0x7f98a8ec6000, 53248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f98a8ec6000
2157 mmap(0x7f98a8ed3000, 16384, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11000) = 0x7f98a8ed3000
2157 mmap(0x7f98a8ed8000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f98a8ed8000
2157 mmap(0x7f98a8eda000, 6784, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f98a8eda000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libudev.so.1", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20G\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=153792, ...}) = 0
2157 mmap(NULL, 157960, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a8e9b000
2157 mmap(0x7f98a8e9f000, 98304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f98a8e9f000
2157 mmap(0x7f98a8eb7000, 36864, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1c000) = 0x7f98a8eb7000
2157 mmap(0x7f98a8ec0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24000) = 0x7f98a8ec0000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/librt.so.1", O_RDONLY|O_CLOEXEC) = 3
2157 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260#\0\0\0\0\0\0"..., 832) = 832
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=35808, ...}) = 0
2157 mmap(NULL, 39904, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f98a8e91000
2157 mmap(0x7f98a8e93000, 16384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f98a8e93000
2157 mmap(0x7f98a8e97000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f98a8e97000
2157 mmap(0x7f98a8e99000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x7f98a8e99000
2157 close(3) = 0
2157 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f98a8e8f000
2157 mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f98a8e8c000
2157 arch_prctl(ARCH_SET_FS, 0x7f98a8e8c740) = 0
2157 mprotect(0x7f98a90b7000, 16384, PROT_READ) = 0
2157 mprotect(0x7f98a90dc000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a8e99000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a8ec0000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a8ed8000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a8ef9000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a8efe000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a90fa000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a927d000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a9448000, 45056, PROT_READ) = 0
2157 mprotect(0x7f98a9467000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a9494000, 16384, PROT_READ) = 0
2157 mprotect(0x7f98a94d2000, 4096, PROT_READ) = 0
2157 mprotect(0x7f98a96f2000, 8192, PROT_READ) = 0
2157 mprotect(0x7f98a98f9000, 4096, PROT_READ) = 0
2157 mprotect(0x564ce8ba5000, 16384, PROT_READ) = 0
2157 mprotect(0x7f98a994a000, 4096, PROT_READ) = 0
2157 munmap(0x7f98a98fd000, 152042) = 0
2157 set_tid_address(0x7f98a8e8ca10) = 2157
2157 set_robust_list(0x7f98a8e8ca20, 24) = 0
2157 rt_sigaction(SIGRTMIN, {sa_handler=0x7f98a90c76b0, sa_mask=[], sa_flags=SA_RESTORER|SA_SIGINFO, sa_restorer=0x7f98a90d3730}, NULL, 8) = 0
2157 rt_sigaction(SIGRT_1, {sa_handler=0x7f98a90c7740, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f98a90d3730}, NULL, 8) = 0
2157 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
2157 prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
2157 brk(NULL) = 0x564ce8eef000
2157 brk(0x564ce8f10000) = 0x564ce8f10000
2157 futex(0x7f98a94565dc, FUTEX_WAKE_PRIVATE, 2147483647) = 0
2157 futex(0x7f98a94565e8, FUTEX_WAKE_PRIVATE, 2147483647) = 0
2157 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=3373216, ...}) = 0
2157 mmap(NULL, 3373216, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f98a8b54000
2157 close(3) = 0
2157 getuid() = 0
2157 openat(AT_FDCWD, "/proc/sys/fs/nr_open", O_RDONLY) = 3
2157 read(3, "1048576\n", 8191) = 8
2157 close(3) = 0
2157 prlimit64(0, RLIMIT_NOFILE, {rlim_cur=1024*1024, rlim_max=1024*1024}, NULL) = 0
2157 rt_sigaction(SIGINT, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
2157 rt_sigaction(SIGQUIT, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
2157 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
2157 clone(child_stack=NULL, flags=CLONE_PARENT_SETTID|SIGCHLD, parent_tidptr=0x7fff54116dfc) = 2159
2157 wait4(2159, <unfinished ...>
2159 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, NULL, 8) = 0
2159 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, NULL, 8) = 0
2159 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
2159 execve("/bin/sh", ["sh", "-c", "/sbin/modprobe cpufreq_stats > /"...], 0x7fff54119350 /* 15 vars */) = 0
2159 brk(NULL) = 0x55c8f893f000
2159 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2159 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
2159 fstat(3, {st_mode=S_IFREG|0644, st_size=152042, ...}) = 0
2159 mmap(NULL, 152042, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fbf2615f000
2159 close(3) = 0
2159 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
2159 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260A\2\0\0\0\0\0"..., 832) = 832
2159 fstat(3, {st_mode=S_IFREG|0755, st_size=1824496, ...}) = 0
2159 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fbf2615d000
2159 mmap(NULL, 1837056, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fbf25f9c000
2159 mprotect(0x7fbf25fbe000, 1658880, PROT_NONE) = 0
2159 mmap(0x7fbf25fbe000, 1343488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7fbf25fbe000
2159 mmap(0x7fbf26106000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16a000) = 0x7fbf26106000
2159 mmap(0x7fbf26153000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b6000) = 0x7fbf26153000
2159 mmap(0x7fbf26159000, 14336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fbf26159000
2159 close(3) = 0
2159 arch_prctl(ARCH_SET_FS, 0x7fbf2615e580) = 0
2159 mprotect(0x7fbf26153000, 16384, PROT_READ) = 0
2159 mprotect(0x55c8f6f11000, 8192, PROT_READ) = 0
2159 mprotect(0x7fbf261ac000, 4096, PROT_READ) = 0
2159 munmap(0x7fbf2615f000, 152042) = 0
2159 getuid() = 0
2159 getgid() = 0
2159 getpid() = 2159
2159 rt_sigaction(SIGCHLD, {sa_handler=0x55c8f6f073c0, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x7fbf25fd3840}, NULL, 8) = 0
2159 geteuid() = 0
2159 brk(NULL) = 0x55c8f893f000
2159 brk(0x55c8f8960000) = 0x55c8f8960000
2159 getppid() = 2157
2159 getcwd("/home/pmenzel", 4096) = 14
2159 geteuid() = 0
2159 getegid() = 0
2159 rt_sigaction(SIGINT, NULL, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
2159 rt_sigaction(SIGINT, {sa_handler=0x55c8f6f073c0, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x7fbf25fd3840}, NULL, 8) = 0
2159 rt_sigaction(SIGQUIT, NULL, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
2159 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x7fbf25fd3840}, NULL, 8) = 0
2159 rt_sigaction(SIGTERM, NULL, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
2159 rt_sigaction(SIGTERM, {sa_handler=SIG_DFL, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x7fbf25fd3840}, NULL, 8) = 0
2159 openat(AT_FDCWD, "/dev/null", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 3
2159 fcntl(1, F_DUPFD, 10) = 10
2159 close(1) = 0
2159 fcntl(10, F_SETFD, FD_CLOEXEC) = 0
2159 dup2(3, 1) = 1
2159 close(3) = 0
2159 fcntl(2, F_DUPFD, 10) = 11
2159 close(2) = 0
2159 fcntl(11, F_SETFD, FD_CLOEXEC) = 0
2159 dup2(1, 2) = 2
2159 clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fbf2615e850) = 2162
2159 wait4(-1, <unfinished ...>
2162 execve("/sbin/modprobe", ["/sbin/modprobe", "cpufreq_stats"], 0x55c8f893f708 /* 16 vars */) = 0
2162 brk(NULL) = 0x55656aa2a000
2162 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2162 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=152042, ...}) = 0
2162 mmap(NULL, 152042, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f2459cea000
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/liblzma.so.5", O_RDONLY|O_CLOEXEC) = 3
2162 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0205\0\0\0\0\0\0"..., 832) = 832
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=158400, ...}) = 0
2162 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f2459ce8000
2162 mmap(NULL, 160400, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f2459cc0000
2162 mmap(0x7f2459cc3000, 98304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f2459cc3000
2162 mmap(0x7f2459cdb000, 45056, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b000) = 0x7f2459cdb000
2162 mmap(0x7f2459ce6000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f2459ce6000
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libcrypto.so.1.1", O_RDONLY|O_CLOEXEC) = 3
2162 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\360\10\0\0\0\0\0"..., 832) = 832
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=3040096, ...}) = 0
2162 mmap(NULL, 3055528, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f24599d6000
2162 mprotect(0x7f2459a5b000, 2293760, PROT_NONE) = 0
2162 mmap(0x7f2459a5b000, 1712128, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x85000) = 0x7f2459a5b000
2162 mmap(0x7f2459bfd000, 577536, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x227000) = 0x7f2459bfd000
2162 mmap(0x7f2459c8b000, 204800, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2b4000) = 0x7f2459c8b000
2162 mmap(0x7f2459cbd000, 12200, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f2459cbd000
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
2162 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260A\2\0\0\0\0\0"..., 832) = 832
2162 fstat(3, {st_mode=S_IFREG|0755, st_size=1824496, ...}) = 0
2162 mmap(NULL, 1837056, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f2459815000
2162 mprotect(0x7f2459837000, 1658880, PROT_NONE) = 0
2162 mmap(0x7f2459837000, 1343488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7f2459837000
2162 mmap(0x7f245997f000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16a000) = 0x7f245997f000
2162 mmap(0x7f24599cc000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b6000) = 0x7f24599cc000
2162 mmap(0x7f24599d2000, 14336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f24599d2000
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
2162 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@l\0\0\0\0\0\0"..., 832) = 832
2162 fstat(3, {st_mode=S_IFREG|0755, st_size=146968, ...}) = 0
2162 mmap(NULL, 132288, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f24597f4000
2162 mmap(0x7f24597fa000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f24597fa000
2162 mmap(0x7f2459809000, 24576, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f2459809000
2162 mmap(0x7f245980f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f245980f000
2162 mmap(0x7f2459811000, 13504, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f2459811000
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
2162 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\21\0\0\0\0\0\0"..., 832) = 832
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=14592, ...}) = 0
2162 mmap(NULL, 16656, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f24597ef000
2162 mmap(0x7f24597f0000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7f24597f0000
2162 mmap(0x7f24597f1000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f24597f1000
2162 mmap(0x7f24597f2000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f24597f2000
2162 close(3) = 0
2162 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f24597ed000
2162 arch_prctl(ARCH_SET_FS, 0x7f24597ee200) = 0
2162 mprotect(0x7f24599cc000, 16384, PROT_READ) = 0
2162 mprotect(0x7f24597f2000, 4096, PROT_READ) = 0
2162 mprotect(0x7f245980f000, 4096, PROT_READ) = 0
2162 mprotect(0x7f2459c8b000, 196608, PROT_READ) = 0
2162 mprotect(0x7f2459ce6000, 4096, PROT_READ) = 0
2162 mprotect(0x556568d35000, 8192, PROT_READ) = 0
2162 mprotect(0x7f2459d37000, 4096, PROT_READ) = 0
2162 munmap(0x7f2459cea000, 152042) = 0
2162 set_tid_address(0x7f24597ee4d0) = 2162
2162 set_robust_list(0x7f24597ee4e0, 24) = 0
2162 rt_sigaction(SIGRTMIN, {sa_handler=0x7f24597fa6b0, sa_mask=[], sa_flags=SA_RESTORER|SA_SIGINFO, sa_restorer=0x7f2459806730}, NULL, 8) = 0
2162 rt_sigaction(SIGRT_1, {sa_handler=0x7f24597fa740, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f2459806730}, NULL, 8) = 0
2162 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
2162 prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
2162 brk(NULL) = 0x55656aa2a000
2162 brk(0x55656aa4b000) = 0x55656aa4b000
2162 uname({sysname="Linux", nodename="ersatz", ...}) = 0
2162 stat("/etc/modprobe.d", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
2162 openat(AT_FDCWD, "/etc/modprobe.d", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 3
2162 fstat(3, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
2162 getdents64(3, /* 3 entries */, 32768) = 104
2162 newfstatat(3, "intel-microcode-blacklist.conf", {st_mode=S_IFREG|0644, st_size=154, ...}, 0) = 0
2162 getdents64(3, /* 0 entries */, 32768) = 0
2162 close(3) = 0
2162 stat("/run/modprobe.d", 0x7ffd4bdd1060) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2162 stat("/lib/modprobe.d", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
2162 openat(AT_FDCWD, "/lib/modprobe.d", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 3
2162 fstat(3, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
2162 getdents64(3, /* 5 entries */, 32768) = 152
2162 newfstatat(3, "fbdev-blacklist.conf", {st_mode=S_IFREG|0644, st_size=390, ...}, 0) = 0
2162 newfstatat(3, "aliases.conf", {st_mode=S_IFREG|0644, st_size=655, ...}, 0) = 0
2162 newfstatat(3, "systemd.conf", {st_mode=S_IFREG|0644, st_size=765, ...}, 0) = 0
2162 getdents64(3, /* 0 entries */, 32768) = 0
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/modprobe.d/aliases.conf", O_RDONLY|O_CLOEXEC) = 3
2162 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=655, ...}) = 0
2162 read(3, "# These are the standard aliases"..., 4096) = 655
2162 read(3, "", 4096) = 0
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/modprobe.d/fbdev-blacklist.conf", O_RDONLY|O_CLOEXEC) = 3
2162 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=390, ...}) = 0
2162 read(3, "# This file blacklists most old-"..., 4096) = 390
2162 read(3, "", 4096) = 0
2162 close(3) = 0
2162 openat(AT_FDCWD, "/etc/modprobe.d/intel-microcode-blacklist.conf", O_RDONLY|O_CLOEXEC) = 3
2162 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=154, ...}) = 0
2162 read(3, "# The microcode module attempts "..., 4096) = 154
2162 read(3, "", 4096) = 0
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.softdep", O_RDONLY|O_CLOEXEC) = 3
2162 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=797, ...}) = 0
2162 read(3, "# Soft dependencies extracted fr"..., 4096) = 797
2162 read(3, "", 4096) = 0
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/modprobe.d/systemd.conf", O_RDONLY|O_CLOEXEC) = 3
2162 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=765, ...}) = 0
2162 read(3, "# SPDX-License-Identifier: LGPL"..., 4096) = 765
2162 read(3, "", 4096) = 0
2162 close(3) = 0
2162 openat(AT_FDCWD, "/proc/cmdline", O_RDONLY|O_CLOEXEC) = 3
2162 read(3, "BOOT_IMAGE=/vmlinuz-5.2.0-2-amd6"..., 4095) = 200
2162 read(3, "", 3895) = 0
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.dep.bin", O_RDONLY|O_CLOEXEC) = 3
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=591258, ...}) = 0
2162 mmap(NULL, 591258, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f245975c000
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.alias.bin", O_RDONLY|O_CLOEXEC) = 3
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=1078394, ...}) = 0
2162 mmap(NULL, 1078394, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f2459654000
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.symbols.bin", O_RDONLY|O_CLOEXEC) = 3
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=632653, ...}) = 0
2162 mmap(NULL, 632653, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f24595b9000
2162 close(3) = 0
2162 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.builtin.bin", O_RDONLY|O_CLOEXEC) = 3
2162 fstat(3, {st_mode=S_IFREG|0644, st_size=5919, ...}) = 0
2162 mmap(NULL, 5919, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f2459d0e000
2162 close(3) = 0
2162 write(2, "modprobe: FATAL: Module cpufreq_"..., 88) = 88
2162 exit_group(1) = ?
2162 +++ exited with 1 +++
2159 <... wait4 resumed> [{WIFEXITED(s) && WEXITSTATUS(s) == 1}], 0, NULL) = 2162
2159 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=2162, si_uid=0, si_status=1, si_utime=0, si_stime=0} ---
2159 rt_sigreturn({mask=[]}) = 2162
2159 dup2(10, 1) = 1
2159 close(10) = 0
2159 dup2(11, 2) = 2
2159 close(11) = 0
2159 exit_group(1) = ?
2159 +++ exited with 1 +++
2157 <... wait4 resumed> [{WIFEXITED(s) && WEXITSTATUS(s) == 1}], 0, NULL) = 2159
2157 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, NULL, 8) = 0
2157 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, NULL, 8) = 0
2157 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
2157 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=2159, si_uid=0, si_status=1, si_utime=0, si_stime=0} ---
2157 openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=2995, ...}) = 0
2157 read(3, "# Locale name alias data base.\n#"..., 4096) = 2995
2157 read(3, "", 4096) = 0
2157 close(3) = 0
2157 openat(AT_FDCWD, "/usr/share/locale/de_DE.UTF-8/LC_MESSAGES/powertop.mo", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/usr/share/locale/de_DE.utf8/LC_MESSAGES/powertop.mo", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/usr/share/locale/de_DE/LC_MESSAGES/powertop.mo", O_RDONLY) = 3
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=9183, ...}) = 0
2157 mmap(NULL, 9183, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f98a9920000
2157 close(3) = 0
2157 openat(AT_FDCWD, "/usr/share/locale/de.UTF-8/LC_MESSAGES/powertop.mo", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/usr/share/locale/de.utf8/LC_MESSAGES/powertop.mo", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/usr/share/locale/de/LC_MESSAGES/powertop.mo", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 write(2, "modprobe cpufreq_stats failed", 29) = 29
2157 rt_sigaction(SIGINT, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, 8) = 0
2157 rt_sigaction(SIGQUIT, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, 8) = 0
2157 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
2157 clone(child_stack=NULL, flags=CLONE_PARENT_SETTID|SIGCHLD, parent_tidptr=0x7fff54116dfc) = 2164
2164 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, <unfinished ...>
2157 wait4(2164, <unfinished ...>
2164 <... rt_sigaction resumed> NULL, 8) = 0
2164 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, NULL, 8) = 0
2164 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
2164 execve("/bin/sh", ["sh", "-c", "/sbin/modprobe msr > /dev/null 2"...], 0x7fff54119350 /* 15 vars */) = 0
2164 brk(NULL) = 0x55cda4dce000
2164 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2164 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
2164 fstat(3, {st_mode=S_IFREG|0644, st_size=152042, ...}) = 0
2164 mmap(NULL, 152042, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f5c7cb71000
2164 close(3) = 0
2164 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
2164 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260A\2\0\0\0\0\0"..., 832) = 832
2164 fstat(3, {st_mode=S_IFREG|0755, st_size=1824496, ...}) = 0
2164 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5c7cb6f000
2164 mmap(NULL, 1837056, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f5c7c9ae000
2164 mprotect(0x7f5c7c9d0000, 1658880, PROT_NONE) = 0
2164 mmap(0x7f5c7c9d0000, 1343488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7f5c7c9d0000
2164 mmap(0x7f5c7cb18000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16a000) = 0x7f5c7cb18000
2164 mmap(0x7f5c7cb65000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b6000) = 0x7f5c7cb65000
2164 mmap(0x7f5c7cb6b000, 14336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f5c7cb6b000
2164 close(3) = 0
2164 arch_prctl(ARCH_SET_FS, 0x7f5c7cb70580) = 0
2164 mprotect(0x7f5c7cb65000, 16384, PROT_READ) = 0
2164 mprotect(0x55cda336c000, 8192, PROT_READ) = 0
2164 mprotect(0x7f5c7cbbe000, 4096, PROT_READ) = 0
2164 munmap(0x7f5c7cb71000, 152042) = 0
2164 getuid() = 0
2164 getgid() = 0
2164 getpid() = 2164
2164 rt_sigaction(SIGCHLD, {sa_handler=0x55cda33623c0, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x7f5c7c9e5840}, NULL, 8) = 0
2164 geteuid() = 0
2164 brk(NULL) = 0x55cda4dce000
2164 brk(0x55cda4def000) = 0x55cda4def000
2164 getppid() = 2157
2164 getcwd("/home/pmenzel", 4096) = 14
2164 geteuid() = 0
2164 getegid() = 0
2164 rt_sigaction(SIGINT, NULL, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
2164 rt_sigaction(SIGINT, {sa_handler=0x55cda33623c0, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x7f5c7c9e5840}, NULL, 8) = 0
2164 rt_sigaction(SIGQUIT, NULL, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
2164 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x7f5c7c9e5840}, NULL, 8) = 0
2164 rt_sigaction(SIGTERM, NULL, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=0}, 8) = 0
2164 rt_sigaction(SIGTERM, {sa_handler=SIG_DFL, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x7f5c7c9e5840}, NULL, 8) = 0
2164 openat(AT_FDCWD, "/dev/null", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 3
2164 fcntl(1, F_DUPFD, 10) = 10
2164 close(1) = 0
2164 fcntl(10, F_SETFD, FD_CLOEXEC) = 0
2164 dup2(3, 1) = 1
2164 close(3) = 0
2164 fcntl(2, F_DUPFD, 10) = 11
2164 close(2) = 0
2164 fcntl(11, F_SETFD, FD_CLOEXEC) = 0
2164 dup2(1, 2) = 2
2164 clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7f5c7cb70850) = 2165
2164 wait4(-1, <unfinished ...>
2165 execve("/sbin/modprobe", ["/sbin/modprobe", "msr"], 0x55cda4dce708 /* 16 vars */) = 0
2165 brk(NULL) = 0x55e60ef39000
2165 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2165 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=152042, ...}) = 0
2165 mmap(NULL, 152042, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f70dc992000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/liblzma.so.5", O_RDONLY|O_CLOEXEC) = 3
2165 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0205\0\0\0\0\0\0"..., 832) = 832
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=158400, ...}) = 0
2165 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f70dc990000
2165 mmap(NULL, 160400, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f70dc968000
2165 mmap(0x7f70dc96b000, 98304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f70dc96b000
2165 mmap(0x7f70dc983000, 45056, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b000) = 0x7f70dc983000
2165 mmap(0x7f70dc98e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f70dc98e000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libcrypto.so.1.1", O_RDONLY|O_CLOEXEC) = 3
2165 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\360\10\0\0\0\0\0"..., 832) = 832
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=3040096, ...}) = 0
2165 mmap(NULL, 3055528, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f70dc67e000
2165 mprotect(0x7f70dc703000, 2293760, PROT_NONE) = 0
2165 mmap(0x7f70dc703000, 1712128, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x85000) = 0x7f70dc703000
2165 mmap(0x7f70dc8a5000, 577536, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x227000) = 0x7f70dc8a5000
2165 mmap(0x7f70dc933000, 204800, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2b4000) = 0x7f70dc933000
2165 mmap(0x7f70dc965000, 12200, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f70dc965000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
2165 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260A\2\0\0\0\0\0"..., 832) = 832
2165 fstat(3, {st_mode=S_IFREG|0755, st_size=1824496, ...}) = 0
2165 mmap(NULL, 1837056, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f70dc4bd000
2165 mprotect(0x7f70dc4df000, 1658880, PROT_NONE) = 0
2165 mmap(0x7f70dc4df000, 1343488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7f70dc4df000
2165 mmap(0x7f70dc627000, 311296, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16a000) = 0x7f70dc627000
2165 mmap(0x7f70dc674000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b6000) = 0x7f70dc674000
2165 mmap(0x7f70dc67a000, 14336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f70dc67a000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
2165 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@l\0\0\0\0\0\0"..., 832) = 832
2165 fstat(3, {st_mode=S_IFREG|0755, st_size=146968, ...}) = 0
2165 mmap(NULL, 132288, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f70dc49c000
2165 mmap(0x7f70dc4a2000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f70dc4a2000
2165 mmap(0x7f70dc4b1000, 24576, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f70dc4b1000
2165 mmap(0x7f70dc4b7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f70dc4b7000
2165 mmap(0x7f70dc4b9000, 13504, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f70dc4b9000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/x86_64-linux-gnu/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
2165 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\21\0\0\0\0\0\0"..., 832) = 832
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=14592, ...}) = 0
2165 mmap(NULL, 16656, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f70dc497000
2165 mmap(0x7f70dc498000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7f70dc498000
2165 mmap(0x7f70dc499000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f70dc499000
2165 mmap(0x7f70dc49a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f70dc49a000
2165 close(3) = 0
2165 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f70dc495000
2165 arch_prctl(ARCH_SET_FS, 0x7f70dc496200) = 0
2165 mprotect(0x7f70dc674000, 16384, PROT_READ) = 0
2165 mprotect(0x7f70dc49a000, 4096, PROT_READ) = 0
2165 mprotect(0x7f70dc4b7000, 4096, PROT_READ) = 0
2165 mprotect(0x7f70dc933000, 196608, PROT_READ) = 0
2165 mprotect(0x7f70dc98e000, 4096, PROT_READ) = 0
2165 mprotect(0x55e60e4ae000, 8192, PROT_READ) = 0
2165 mprotect(0x7f70dc9df000, 4096, PROT_READ) = 0
2165 munmap(0x7f70dc992000, 152042) = 0
2165 set_tid_address(0x7f70dc4964d0) = 2165
2165 set_robust_list(0x7f70dc4964e0, 24) = 0
2165 rt_sigaction(SIGRTMIN, {sa_handler=0x7f70dc4a26b0, sa_mask=[], sa_flags=SA_RESTORER|SA_SIGINFO, sa_restorer=0x7f70dc4ae730}, NULL, 8) = 0
2165 rt_sigaction(SIGRT_1, {sa_handler=0x7f70dc4a2740, sa_mask=[], sa_flags=SA_RESTORER|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f70dc4ae730}, NULL, 8) = 0
2165 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
2165 prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
2165 brk(NULL) = 0x55e60ef39000
2165 brk(0x55e60ef5a000) = 0x55e60ef5a000
2165 uname({sysname="Linux", nodename="ersatz", ...}) = 0
2165 stat("/etc/modprobe.d", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
2165 openat(AT_FDCWD, "/etc/modprobe.d", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 3
2165 fstat(3, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
2165 getdents64(3, /* 3 entries */, 32768) = 104
2165 newfstatat(3, "intel-microcode-blacklist.conf", {st_mode=S_IFREG|0644, st_size=154, ...}, 0) = 0
2165 getdents64(3, /* 0 entries */, 32768) = 0
2165 close(3) = 0
2165 stat("/run/modprobe.d", 0x7ffff0a212f0) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2165 stat("/lib/modprobe.d", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
2165 openat(AT_FDCWD, "/lib/modprobe.d", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 3
2165 fstat(3, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
2165 getdents64(3, /* 5 entries */, 32768) = 152
2165 newfstatat(3, "fbdev-blacklist.conf", {st_mode=S_IFREG|0644, st_size=390, ...}, 0) = 0
2165 newfstatat(3, "aliases.conf", {st_mode=S_IFREG|0644, st_size=655, ...}, 0) = 0
2165 newfstatat(3, "systemd.conf", {st_mode=S_IFREG|0644, st_size=765, ...}, 0) = 0
2165 getdents64(3, /* 0 entries */, 32768) = 0
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/modprobe.d/aliases.conf", O_RDONLY|O_CLOEXEC) = 3
2165 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=655, ...}) = 0
2165 read(3, "# These are the standard aliases"..., 4096) = 655
2165 read(3, "", 4096) = 0
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/modprobe.d/fbdev-blacklist.conf", O_RDONLY|O_CLOEXEC) = 3
2165 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=390, ...}) = 0
2165 read(3, "# This file blacklists most old-"..., 4096) = 390
2165 read(3, "", 4096) = 0
2165 close(3) = 0
2165 openat(AT_FDCWD, "/etc/modprobe.d/intel-microcode-blacklist.conf", O_RDONLY|O_CLOEXEC) = 3
2165 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=154, ...}) = 0
2165 read(3, "# The microcode module attempts "..., 4096) = 154
2165 read(3, "", 4096) = 0
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.softdep", O_RDONLY|O_CLOEXEC) = 3
2165 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=797, ...}) = 0
2165 read(3, "# Soft dependencies extracted fr"..., 4096) = 797
2165 read(3, "", 4096) = 0
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/modprobe.d/systemd.conf", O_RDONLY|O_CLOEXEC) = 3
2165 fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=765, ...}) = 0
2165 read(3, "# SPDX-License-Identifier: LGPL"..., 4096) = 765
2165 read(3, "", 4096) = 0
2165 close(3) = 0
2165 openat(AT_FDCWD, "/proc/cmdline", O_RDONLY|O_CLOEXEC) = 3
2165 read(3, "BOOT_IMAGE=/vmlinuz-5.2.0-2-amd6"..., 4095) = 200
2165 read(3, "", 3895) = 0
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.dep.bin", O_RDONLY|O_CLOEXEC) = 3
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=591258, ...}) = 0
2165 mmap(NULL, 591258, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f70dc404000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.alias.bin", O_RDONLY|O_CLOEXEC) = 3
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=1078394, ...}) = 0
2165 mmap(NULL, 1078394, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f70dc2fc000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.symbols.bin", O_RDONLY|O_CLOEXEC) = 3
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=632653, ...}) = 0
2165 mmap(NULL, 632653, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f70dc261000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/lib/modules/5.2.0-2-amd64/modules.builtin.bin", O_RDONLY|O_CLOEXEC) = 3
2165 fstat(3, {st_mode=S_IFREG|0644, st_size=5919, ...}) = 0
2165 mmap(NULL, 5919, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f70dc9b6000
2165 close(3) = 0
2165 openat(AT_FDCWD, "/sys/module/msr/initstate", O_RDONLY|O_CLOEXEC) = 3
2165 read(3, "live\n", 31) = 5
2165 read(3, "", 26) = 0
2165 close(3) = 0
2165 munmap(0x7f70dc404000, 591258) = 0
2165 munmap(0x7f70dc2fc000, 1078394) = 0
2165 munmap(0x7f70dc261000, 632653) = 0
2165 munmap(0x7f70dc9b6000, 5919) = 0
2165 exit_group(0) = ?
2165 +++ exited with 0 +++
2164 <... wait4 resumed> [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 2165
2164 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=2165, si_uid=0, si_status=0, si_utime=0, si_stime=0} ---
2164 rt_sigreturn({mask=[]}) = 2165
2164 dup2(10, 1) = 1
2164 close(10) = 0
2164 dup2(11, 2) = 2
2164 close(11) = 0
2164 exit_group(0) = ?
2164 +++ exited with 0 +++
2157 <... wait4 resumed> [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 2164
2157 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, NULL, 8) = 0
2157 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x7f98a8f37840}, NULL, 8) = 0
2157 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
2157 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=2164, si_uid=0, si_status=0, si_utime=0, si_stime=0} ---
2157 statfs("/sys/kernel/debug", {f_type=DEBUGFS_MAGIC, f_bsize=4096, f_blocks=0, f_bfree=0, f_bavail=0, f_files=0, f_ffree=0, f_fsid={val=[0, 0]}, f_namelen=255, f_frsize=4096, f_flags=ST_VALID|ST_NOSUID|ST_NODEV|ST_NOEXEC|ST_RELATIME}) = 0
2157 access("/var/cache/", W_OK) = 0
2157 mkdir("/var/cache/powertop", 0600) = -1 EEXIST (Die Datei existiert bereits)
2157 access("/var/cache/powertop", W_OK) = 0
2157 access("/data/local/powertop", W_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/var/cache/powertop/saved_results.powertop", O_RDONLY) = 3
2157 read(3, "5.00000\nalsa:hwC0D0\t0.00000\nback"..., 8191) = 8191
2157 read(3, "d6b-0002\t0.00000\nusb-device-usb2"..., 8191) = 8191
2157 read(3, "-2-1-8087-8001\t0.00000\nusb-devic"..., 8191) = 8191
2157 read(3, "00000\nruntime-microcode\t0.00000\n"..., 8191) = 8191
2157 read(3, "0.00000\nruntime-efivars.0\t0.0000"..., 8191) = 8191
2157 read(3, "\t0.00000\nruntime-PNP0C0D:00\t0.00"..., 8191) = 8191
2157 read(3, "00\nruntime-INT340F:00\t0.00000\nru"..., 8191) = 8191
2157 brk(0x564ce8f31000) = 0x564ce8f31000
2157 read(3, "runtime-0000:01:00.0\t0.00000\nrun"..., 8191) = 8191
2157 read(3, "0.00000\nruntime-0000:00:16.0\t0.0"..., 8191) = 8191
2157 read(3, "no1-up\t1.00000\ngpu-operations\t0."..., 8191) = 8191
2157 read(3, "ntel_backlight\t4.00000\nbacklight"..., 8191) = 8191
2157 read(3, "0.00000\nusb-device-usb3-1d6b-000"..., 8191) = 8191
2157 read(3, "\t0.00000\nusb-device-2-1.6-1bcf-2"..., 8191) = 510
2157 read(3, "", 8191) = 0
2157 close(3) = 0
2157 openat(AT_FDCWD, "/usr/lib/x86_64-linux-gnu/gconv/gconv-modules.cache", O_RDONLY) = 3
2157 fstat(3, {st_mode=S_IFREG|0644, st_size=26402, ...}) = 0
2157 mmap(NULL, 26402, PROT_READ, MAP_SHARED, 3, 0) = 0x7f98a9919000
2157 close(3) = 0
2157 futex(0x7f98a90bca08, FUTEX_WAKE_PRIVATE, 2147483647) = 0
2157 write(2, "35 geladene vorherige Messungen\n", 32) = 32
2157 access("/var/cache/powertop", W_OK) = 0
2157 access("/data/local/powertop", W_OK) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/var/cache/powertop/saved_parameters.powertop", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(0x88, 0x1), ...}) = 0
2157 write(1, "Kann nicht von Datei laden /var/"..., 73) = 73
2157 write(1, "File will be loaded after taking"..., 85) = 85
2157 openat(AT_FDCWD, "/proc/cpuinfo", O_RDONLY) = 3
2157 read(3, "processor\t: 0\nvendor_id\t: Genuin"..., 8191) = 3651
2157 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/topology/core_id", O_RDONLY) = 4
2157 read(4, "0\n", 8191) = 2
2157 close(4) = 0
2157 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu0/topology/physical_package_id", O_RDONLY) = 4
2157 read(4, "0\n", 8191) = 2
2157 close(4) = 0
2157 access("/dev/cpu/0/msr", R_OK) = 0
2157 openat(AT_FDCWD, "/dev/cpu/0/msr", O_RDONLY) = 4
2157 pread64(4, "\373\307q\307\17\0\0\0", 8, 232) = 8
2157 close(4) = 0
2157 write(2, "RAPL device for cpu 0\n", 22) = 22
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
2157 fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
2157 getdents64(4, /* 7 entries */, 32768) = 208
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/./name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/../name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/uevent/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/enabled/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/power/name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/name", O_RDONLY) = 5
2157 read(5, "package-0\n", 8191) = 10
2157 close(5) = 0
2157 close(4) = 0
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
2157 fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
2157 getdents64(4, /* 20 entries */, 32768) = 752
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/./name", O_RDONLY) = 5
2157 read(5, "package-0\n", 8191) = 10
2157 close(5) = 0
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/../name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/uevent/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/energy_uj/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:0/name", O_RDONLY) = 5
2157 read(5, "core\n", 8191) = 5
2157 close(5) = 0
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/enabled/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_1_max_power_uw/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/power/name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/device/name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_1_time_window_us/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_1_power_limit_uw/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:1/name", O_RDONLY) = 5
2157 read(5, "uncore\n", 8191) = 7
2157 close(5) = 0
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_0_time_window_us/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/subsystem/name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_1_name/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_0_power_limit_uw/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_0_name/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/name/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_0_max_power_uw/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/max_energy_range_uj/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 getdents64(4, /* 0 entries */, 32768) = 0
2157 close(4) = 0
2157 write(2, "RAPL Using PowerCap Sysfs : Doma"..., 42) = 42
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:0/energy_uj", O_RDONLY) = 4
2157 read(4, "414306495\n", 8191) = 10
2157 close(4) = 0
2157 write(2, "RAPL device for cpu 0\n", 22) = 22
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
2157 fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
2157 getdents64(4, /* 7 entries */, 32768) = 208
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/./name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/../name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/uevent/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/enabled/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/power/name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/name", O_RDONLY) = 5
2157 read(5, "package-0\n", 8191) = 10
2157 close(5) = 0
2157 close(4) = 0
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 4
2157 fstat(4, {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0
2157 getdents64(4, /* 20 entries */, 32768) = 752
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/./name", O_RDONLY) = 5
2157 read(5, "package-0\n", 8191) = 10
2157 close(5) = 0
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/../name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/uevent/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/energy_uj/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:0/name", O_RDONLY) = 5
2157 read(5, "core\n", 8191) = 5
2157 close(5) = 0
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/enabled/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_1_max_power_uw/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/power/name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/device/name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_1_time_window_us/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_1_power_limit_uw/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:1/name", O_RDONLY) = 5
2157 read(5, "uncore\n", 8191) = 7
2157 close(5) = 0
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_0_time_window_us/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/subsystem/name", O_RDONLY) = -1 ENOENT (Datei oder Verzeichnis nicht gefunden)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_1_name/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_0_power_limit_uw/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_0_name/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/name/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/constraint_0_max_power_uw/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 openat(AT_FDCWD, "/sys/class/powercap/intel-rapl/intel-rapl:0/max_energy_range_uj/name", O_RDONLY) = -1 ENOTDIR (Ist kein Verzeichnis)
2157 getdents64(4, /* 0 entries */, 32768) = 0
2157 close(4) = 0
2157 write(2, "RAPL Using PowerCap Sysfs : Doma"..., 42) = 42
2157 access("/dev/cpu/0/msr", R_OK) = 0
2157 openat(AT_FDCWD, "/dev/cpu/0/msr", O_RDONLY) = 4
2157 pread64(4, "\205f\346\307\17\0\0\0", 8, 232) = 8
2157 close(4) = 0
2157 access("/dev/cpu/0/msr", R_OK) = 0
2157 openat(AT_FDCWD, "/dev/cpu/0/msr", O_RDONLY) = 4
2157 pread64(4, "(\25\355\307\17\0\0\0", 8, 232) = 8
2157 close(4) = 0
2157 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu1/topology/core_id", O_RDONLY) = 4
2157 read(4, "1\n", 8191) = 2
2157 close(4) = 0
2157 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu1/topology/physical_package_id", O_RDONLY) = 4
2157 read(4, "0\n", 8191) = 2
2157 close(4) = 0
2157 access("/dev/cpu/1/msr", R_OK) = 0
2157 openat(AT_FDCWD, "/dev/cpu/1/msr", O_RDONLY) = 4
2157 pread64(4, "!\264\223\350\17\0\0\0", 8, 232) = 8
2157 close(4) = 0
2157 access("/dev/cpu/1/msr", R_OK) = 0
2157 openat(AT_FDCWD, "/dev/cpu/1/msr", O_RDONLY) = 4
2157 pread64(4, "X\332\223\350\17\0\0\0", 8, 232) = 8
2157 close(4) = 0
2157 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu2/topology/core_id", O_RDONLY) = 4
2157 read(4, "0\n", 8191) = 2
2157 close(4) = 0
2157 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu2/topology/physical_package_id", O_RDONLY) = 4
2157 read(4, "0\n", 8191) = 2
2157 close(4) = 0
2157 access("/dev/cpu/2/msr", R_OK) = 0
2157 openat(AT_FDCWD, "/dev/cpu/2/msr", O_RDONLY) = 4
2157 pread64(4, "\256\354Hc\r\0\0\0", 8, 232) = 8
2157 close(4) = 0
2157 read(3, "processor\t: 3\nvendor_id\t: Genuin"..., 8191) = 1217
2157 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu3/topology/core_id", O_RDONLY) = 4
2157 read(4, "1\n", 8191) = 2
2157 close(4) = 0
2157 openat(AT_FDCWD, "/sys/devices/system/cpu/cpu3/topology/physical_package_id", O_RDONLY) = 4
2157 read(4, "0\n", 8191) = 2
2157 close(4) = 0
2157 access("/dev/cpu/3/msr", R_OK) = 0
2157 openat(AT_FDCWD, "/dev/cpu/3/msr", O_RDONLY) = 4
2157 pread64(4, "4Ie\21\16\0\0\0", 8, 232) = 8
2157 close(4) = 0
2157 read(3, "", 8191) = 0
2157 close(3) = 0
2157 access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK) = 0
2157 openat(AT_FDCWD, "/sys/kernel/debug/tracing/events/power/cpu_idle/id", O_RDONLY) = ?
2157 +++ killed by SIGKILL +++
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-10 18:28 ` Paul Menzel
@ 2019-08-10 21:11 ` Paul Menzel
2019-08-11 6:22 ` Thomas Gleixner
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2019-08-10 21:11 UTC (permalink / raw)
To: Thomas Gleixner, Jacob Pan, Len Brown; +Cc: x86, LKML, linux-pm
[+ INTEL IDLE DRIVER]
Dear Linux folks,
On 10.08.19 20:28, Paul Menzel wrote:
> On 10.08.19 19:31, Thomas Gleixner wrote:
>
>> On Sat, 10 Aug 2019, Paul Menzel wrote:
>>>
>>> I have no idea, who to report this to, so I please refer me to the
>>> correct
>>> list.
>>
>> I have no idea yet either :)
>>
>>> With Linux 5.2.7 from Debian Sid/unstable and PowerTOP 2.10, executing
>>>
>>> sudo powertop --auto-tune
>>>
>>> causes a NULL pointer dereference, and the graphical session crashes
>>> due to an
>>> effect on the i915 driver. It worked in the past with the 4.19 series
>>> from
>>> Debian.
>>>
>>> Here is the trace, and please find all Linux kernel logs attached.
>>>
>>>> [ 2027.170589] BUG: kernel NULL pointer dereference, address:
>>>> 0000000000000000
>>>> [ 2027.170600] #PF: supervisor instruction fetch in kernel mode
>>>> [ 2027.170604] #PF: error_code(0x0010) - not-present page
>>>> [ 2027.170609] PGD 0 P4D 0 [ 2027.170619] Oops: 0010 [#1] SMP PTI
>> ...
>>>> [ 2027.170730] do_dentry_open+0x13a/0x370
>>
>> If you have compiled with debug info, please decode the line:
>>
>> linux/scripts/faddr2line vmlinux do_dentry_open+0x13a/0x370
>>
>> That gives us the fops pointer which is NULL.
>
> Hah, luckily it’s reproducible.
>
> ```
> $ scripts/faddr2line /usr/lib/debug/boot/vmlinux-5.2.0-2-amd64
> do_dentry_open+0x13a/0x370
> do_dentry_open+0x13a/0x370:
> do_dentry_open at fs/open.c:799
> ```
>
>>>> [ 2027.170745] path_openat+0x2c6/0x1480
>>>> [ 2027.170757] ? terminate_walk+0xe6/0x100
>>>> [ 2027.170767] ? path_lookupat.isra.48+0xa3/0x220
>>>> [ 2027.170779] ? reuse_swap_page+0x105/0x320
>>>> [ 2027.170791] do_filp_open+0x93/0x100
>>>> [ 2027.170804] ? __check_object_size+0x15d/0x189
>>>> [ 2027.170816] do_sys_open+0x184/0x220
>>>> [ 2027.170828] do_syscall_64+0x53/0x130
>>>> [ 2027.170837] entry_SYSCALL_64_after_hwframe+0x44/0xa9
>>
>> That's an open crashing. We just don't know which file. Is the machine
>> completely hosed after that or is it just the graphics stuff dying?
>
> No, the graphical login manager showed up, and I could log back in, and
> continue using hte machine.
>
>> If it's not completely dead then instead of running it from your
>> graphical
>> desktop you could switch to a VGA terminal Alt+Ctrl+F1 (or whatever
>> function key your distro maps to) after boot and run powertop with strace
>> from there:
>>
>> strace -f -o xxx.log powertop
>>
>> With a bit of luck xxx.log should contain the information about the
>> file it
>> tries to open.
>
> ```
> 2157 access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK) = 0
> 2157 openat(AT_FDCWD,
> "/sys/kernel/debug/tracing/events/power/cpu_idle/id", O_RDONLY) = ?
> 2157 +++ killed by SIGKILL +++
> ```
>
>> Alternatively if you have a serial console you can enable the
>> sys_enter_open* tracepoints:
>>
>> # echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_open
>> # echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
>>
>> Either add 'ftrace_dump_on_oops' to the kernel command line or enable it
>> from the shell:
>>
>> # echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
>>
>> Then run powertop. After the crash it will take some time to spill out
>> the trace buffer over serial, but it will pinpoint the offending file.
>
> I do not have serial console on this device.
For the record. It is also reproducible with Linux 5.2.6, and trying to
print the file contents with cat already fails.
```
$ sudo ls -l /sys/kernel/debug/tracing/events/power/cpu_idle/id
-r--r--r-- 1 root root 0 Aug 10 23:05
/sys/kernel/debug/tracing/events/power/cpu_idle/id
$ sudo cat /sys/kernel/debug/tracing/events/power/cpu_idle/id
Killed
```
Kind regards,
Paul
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-10 21:11 ` [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: " Paul Menzel
@ 2019-08-11 6:22 ` Thomas Gleixner
2019-08-11 9:46 ` Salvatore Bonaccorso
0 siblings, 1 reply; 10+ messages in thread
From: Thomas Gleixner @ 2019-08-11 6:22 UTC (permalink / raw)
To: Paul Menzel; +Cc: Jacob Pan, Len Brown, x86, LKML, linux-pm, Steven Rostedt
[-- Attachment #1: Type: text/plain, Size: 4162 bytes --]
On Sat, 10 Aug 2019, Paul Menzel wrote:
Cc+ Steven
> [+ INTEL IDLE DRIVER]
>
> Dear Linux folks,
>
>
> On 10.08.19 20:28, Paul Menzel wrote:
>
> > On 10.08.19 19:31, Thomas Gleixner wrote:
> >
> > > On Sat, 10 Aug 2019, Paul Menzel wrote:
> > > >
> > > > I have no idea, who to report this to, so I please refer me to the
> > > > correct
> > > > list.
> > >
> > > I have no idea yet either :)
> > >
> > > > With Linux 5.2.7 from Debian Sid/unstable and PowerTOP 2.10, executing
> > > >
> > > > sudo powertop --auto-tune
> > > >
> > > > causes a NULL pointer dereference, and the graphical session crashes due
> > > > to an
> > > > effect on the i915 driver. It worked in the past with the 4.19 series
> > > > from
> > > > Debian.
> > > >
> > > > Here is the trace, and please find all Linux kernel logs attached.
> > > >
> > > > > [ 2027.170589] BUG: kernel NULL pointer dereference, address:
> > > > > 0000000000000000
> > > > > [ 2027.170600] #PF: supervisor instruction fetch in kernel mode
> > > > > [ 2027.170604] #PF: error_code(0x0010) - not-present page
> > > > > [ 2027.170609] PGD 0 P4D 0 [ 2027.170619] Oops: 0010 [#1] SMP PTI
> > > ...
> > > > > [ 2027.170730] do_dentry_open+0x13a/0x370
> > >
> > > If you have compiled with debug info, please decode the line:
> > >
> > > linux/scripts/faddr2line vmlinux do_dentry_open+0x13a/0x370
> > >
> > > That gives us the fops pointer which is NULL.
> >
> > Hah, luckily it’s reproducible.
> >
> > ```
> > $ scripts/faddr2line /usr/lib/debug/boot/vmlinux-5.2.0-2-amd64
> > do_dentry_open+0x13a/0x370
> > do_dentry_open+0x13a/0x370:
> > do_dentry_open at fs/open.c:799
> > ```
> >
> > > > > [ 2027.170745] path_openat+0x2c6/0x1480
> > > > > [ 2027.170757] ? terminate_walk+0xe6/0x100
> > > > > [ 2027.170767] ? path_lookupat.isra.48+0xa3/0x220
> > > > > [ 2027.170779] ? reuse_swap_page+0x105/0x320
> > > > > [ 2027.170791] do_filp_open+0x93/0x100
> > > > > [ 2027.170804] ? __check_object_size+0x15d/0x189
> > > > > [ 2027.170816] do_sys_open+0x184/0x220
> > > > > [ 2027.170828] do_syscall_64+0x53/0x130
> > > > > [ 2027.170837] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > >
> > > That's an open crashing. We just don't know which file. Is the machine
> > > completely hosed after that or is it just the graphics stuff dying?
> >
> > No, the graphical login manager showed up, and I could log back in, and
> > continue using hte machine.
> >
> > > If it's not completely dead then instead of running it from your graphical
> > > desktop you could switch to a VGA terminal Alt+Ctrl+F1 (or whatever
> > > function key your distro maps to) after boot and run powertop with strace
> > > from there:
> > >
> > > strace -f -o xxx.log powertop
> > >
> > > With a bit of luck xxx.log should contain the information about the file
> > > it
> > > tries to open.
> >
> > ```
> > 2157 access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK) = 0
> > 2157 openat(AT_FDCWD, "/sys/kernel/debug/tracing/events/power/cpu_idle/id",
> > O_RDONLY) = ?
> > 2157 +++ killed by SIGKILL +++
> > ```
> >
> > > Alternatively if you have a serial console you can enable the
> > > sys_enter_open* tracepoints:
> > >
> > > # echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_open
> > > # echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
> > >
> > > Either add 'ftrace_dump_on_oops' to the kernel command line or enable it
> > > from the shell:
> > >
> > > # echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
> > >
> > > Then run powertop. After the crash it will take some time to spill out the
> > > trace buffer over serial, but it will pinpoint the offending file.
> >
> > I do not have serial console on this device.
>
> For the record. It is also reproducible with Linux 5.2.6, and trying to print
> the file contents with cat already fails.
>
> ```
> $ sudo ls -l /sys/kernel/debug/tracing/events/power/cpu_idle/id
> -r--r--r-- 1 root root 0 Aug 10 23:05
> /sys/kernel/debug/tracing/events/power/cpu_idle/id
> $ sudo cat /sys/kernel/debug/tracing/events/power/cpu_idle/id
> Killed
> ```
>
>
> Kind regards,
>
> Paul
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-11 6:22 ` Thomas Gleixner
@ 2019-08-11 9:46 ` Salvatore Bonaccorso
2019-08-11 12:58 ` Thomas Gleixner
0 siblings, 1 reply; 10+ messages in thread
From: Salvatore Bonaccorso @ 2019-08-11 9:46 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Paul Menzel, Jacob Pan, Len Brown, x86, LKML, linux-pm,
Steven Rostedt, Matthew Garrett
hi,
On Sun, Aug 11, 2019 at 08:22:35AM +0200, Thomas Gleixner wrote:
> On Sat, 10 Aug 2019, Paul Menzel wrote:
>
> Cc+ Steven
>
> > [+ INTEL IDLE DRIVER]
> >
> > Dear Linux folks,
> >
> >
> > On 10.08.19 20:28, Paul Menzel wrote:
> >
> > > On 10.08.19 19:31, Thomas Gleixner wrote:
> > >
> > > > On Sat, 10 Aug 2019, Paul Menzel wrote:
> > > > >
> > > > > I have no idea, who to report this to, so I please refer me to the
> > > > > correct
> > > > > list.
> > > >
> > > > I have no idea yet either :)
> > > >
> > > > > With Linux 5.2.7 from Debian Sid/unstable and PowerTOP 2.10, executing
> > > > >
> > > > > sudo powertop --auto-tune
> > > > >
> > > > > causes a NULL pointer dereference, and the graphical session crashes due
> > > > > to an
> > > > > effect on the i915 driver. It worked in the past with the 4.19 series
> > > > > from
> > > > > Debian.
> > > > >
> > > > > Here is the trace, and please find all Linux kernel logs attached.
> > > > >
> > > > > > [ 2027.170589] BUG: kernel NULL pointer dereference, address:
> > > > > > 0000000000000000
> > > > > > [ 2027.170600] #PF: supervisor instruction fetch in kernel mode
> > > > > > [ 2027.170604] #PF: error_code(0x0010) - not-present page
> > > > > > [ 2027.170609] PGD 0 P4D 0 [ 2027.170619] Oops: 0010 [#1] SMP PTI
> > > > ...
> > > > > > [ 2027.170730] do_dentry_open+0x13a/0x370
> > > >
> > > > If you have compiled with debug info, please decode the line:
> > > >
> > > > linux/scripts/faddr2line vmlinux do_dentry_open+0x13a/0x370
> > > >
> > > > That gives us the fops pointer which is NULL.
> > >
> > > Hah, luckily it’s reproducible.
> > >
> > > ```
> > > $ scripts/faddr2line /usr/lib/debug/boot/vmlinux-5.2.0-2-amd64
> > > do_dentry_open+0x13a/0x370
> > > do_dentry_open+0x13a/0x370:
> > > do_dentry_open at fs/open.c:799
> > > ```
> > >
> > > > > > [ 2027.170745] path_openat+0x2c6/0x1480
> > > > > > [ 2027.170757] ? terminate_walk+0xe6/0x100
> > > > > > [ 2027.170767] ? path_lookupat.isra.48+0xa3/0x220
> > > > > > [ 2027.170779] ? reuse_swap_page+0x105/0x320
> > > > > > [ 2027.170791] do_filp_open+0x93/0x100
> > > > > > [ 2027.170804] ? __check_object_size+0x15d/0x189
> > > > > > [ 2027.170816] do_sys_open+0x184/0x220
> > > > > > [ 2027.170828] do_syscall_64+0x53/0x130
> > > > > > [ 2027.170837] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > > >
> > > > That's an open crashing. We just don't know which file. Is the machine
> > > > completely hosed after that or is it just the graphics stuff dying?
> > >
> > > No, the graphical login manager showed up, and I could log back in, and
> > > continue using hte machine.
> > >
> > > > If it's not completely dead then instead of running it from your graphical
> > > > desktop you could switch to a VGA terminal Alt+Ctrl+F1 (or whatever
> > > > function key your distro maps to) after boot and run powertop with strace
> > > > from there:
> > > >
> > > > strace -f -o xxx.log powertop
> > > >
> > > > With a bit of luck xxx.log should contain the information about the file
> > > > it
> > > > tries to open.
> > >
> > > ```
> > > 2157 access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK) = 0
> > > 2157 openat(AT_FDCWD, "/sys/kernel/debug/tracing/events/power/cpu_idle/id",
> > > O_RDONLY) = ?
> > > 2157 +++ killed by SIGKILL +++
> > > ```
> > >
> > > > Alternatively if you have a serial console you can enable the
> > > > sys_enter_open* tracepoints:
> > > >
> > > > # echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_open
> > > > # echo 1 >/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
> > > >
> > > > Either add 'ftrace_dump_on_oops' to the kernel command line or enable it
> > > > from the shell:
> > > >
> > > > # echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
> > > >
> > > > Then run powertop. After the crash it will take some time to spill out the
> > > > trace buffer over serial, but it will pinpoint the offending file.
> > >
> > > I do not have serial console on this device.
> >
> > For the record. It is also reproducible with Linux 5.2.6, and trying to print
> > the file contents with cat already fails.
> >
> > ```
> > $ sudo ls -l /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > -r--r--r-- 1 root root 0 Aug 10 23:05
> > /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > $ sudo cat /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > Killed
> > ```
This seems to be related to https://bugs.debian.org/934304 (in
particular https://bugs.debian.org/934304#29). The mentioned patch
features/all/lockdown/0031-tracefs-Restrict-tracefs-when-the-kernel-is-locked-d.patch
is a backport of https://patchwork.kernel.org/patch/11069661/ with
only change that it is converted back to the non-LSM lockdown API.
Regards,
Salvatore
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-11 9:46 ` Salvatore Bonaccorso
@ 2019-08-11 12:58 ` Thomas Gleixner
2019-08-11 15:33 ` Salvatore Bonaccorso
0 siblings, 1 reply; 10+ messages in thread
From: Thomas Gleixner @ 2019-08-11 12:58 UTC (permalink / raw)
To: Salvatore Bonaccorso
Cc: Paul Menzel, Jacob Pan, Len Brown, x86, LKML, linux-pm,
Steven Rostedt, Matthew Garrett
Salvatore,
On Sun, 11 Aug 2019, Salvatore Bonaccorso wrote:
> On Sun, Aug 11, 2019 at 08:22:35AM +0200, Thomas Gleixner wrote:
> > On Sat, 10 Aug 2019, Paul Menzel wrote:
> > > For the record. It is also reproducible with Linux 5.2.6, and trying to print
> > > the file contents with cat already fails.
> > >
> > > ```
> > > $ sudo ls -l /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > -r--r--r-- 1 root root 0 Aug 10 23:05
> > > /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > $ sudo cat /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > Killed
> > > ```
>
> This seems to be related to https://bugs.debian.org/934304 (in
> particular https://bugs.debian.org/934304#29). The mentioned patch
> features/all/lockdown/0031-tracefs-Restrict-tracefs-when-the-kernel-is-locked-d.patch
> is a backport of https://patchwork.kernel.org/patch/11069661/ with
> only change that it is converted back to the non-LSM lockdown API.
So that's a debian kernel specific issue?
Thanks,
tglx
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-11 12:58 ` Thomas Gleixner
@ 2019-08-11 15:33 ` Salvatore Bonaccorso
2019-08-12 15:28 ` Steven Rostedt
0 siblings, 1 reply; 10+ messages in thread
From: Salvatore Bonaccorso @ 2019-08-11 15:33 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Paul Menzel, Jacob Pan, Len Brown, x86, LKML, linux-pm,
Steven Rostedt, Matthew Garrett
Thomas,
On Sun, Aug 11, 2019 at 02:58:15PM +0200, Thomas Gleixner wrote:
> Salvatore,
>
> On Sun, 11 Aug 2019, Salvatore Bonaccorso wrote:
> > On Sun, Aug 11, 2019 at 08:22:35AM +0200, Thomas Gleixner wrote:
> > > On Sat, 10 Aug 2019, Paul Menzel wrote:
> > > > For the record. It is also reproducible with Linux 5.2.6, and trying to print
> > > > the file contents with cat already fails.
> > > >
> > > > ```
> > > > $ sudo ls -l /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > > -r--r--r-- 1 root root 0 Aug 10 23:05
> > > > /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > > $ sudo cat /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > > Killed
> > > > ```
> >
> > This seems to be related to https://bugs.debian.org/934304 (in
> > particular https://bugs.debian.org/934304#29). The mentioned patch
> > features/all/lockdown/0031-tracefs-Restrict-tracefs-when-the-kernel-is-locked-d.patch
> > is a backport of https://patchwork.kernel.org/patch/11069661/ with
> > only change that it is converted back to the non-LSM lockdown API.
>
> So that's a debian kernel specific issue?
"yes". A kernel build without the above patch does not exhibit the
issue. So the issue is specific to that lockdown patch ("tracefs:
Restrict tracefs when the kernel is locked down").
Steven and Matthew are both CC'ed.
Regards,
Salvatore
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-11 15:33 ` Salvatore Bonaccorso
@ 2019-08-12 15:28 ` Steven Rostedt
2019-08-12 16:24 ` Matthew Garrett
0 siblings, 1 reply; 10+ messages in thread
From: Steven Rostedt @ 2019-08-12 15:28 UTC (permalink / raw)
To: Salvatore Bonaccorso
Cc: Thomas Gleixner, Paul Menzel, Jacob Pan, Len Brown, x86, LKML,
linux-pm, Matthew Garrett
On Sun, 11 Aug 2019 17:33:26 +0200
Salvatore Bonaccorso <carnil@debian.org> wrote:
> Thomas,
>
> On Sun, Aug 11, 2019 at 02:58:15PM +0200, Thomas Gleixner wrote:
> > Salvatore,
> >
> > On Sun, 11 Aug 2019, Salvatore Bonaccorso wrote:
> > > On Sun, Aug 11, 2019 at 08:22:35AM +0200, Thomas Gleixner wrote:
> > > > On Sat, 10 Aug 2019, Paul Menzel wrote:
> > > > > For the record. It is also reproducible with Linux 5.2.6, and trying to print
> > > > > the file contents with cat already fails.
> > > > >
> > > > > ```
> > > > > $ sudo ls -l /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > > > -r--r--r-- 1 root root 0 Aug 10 23:05
> > > > > /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > > > $ sudo cat /sys/kernel/debug/tracing/events/power/cpu_idle/id
> > > > > Killed
> > > > > ```
> > >
> > > This seems to be related to https://bugs.debian.org/934304 (in
> > > particular https://bugs.debian.org/934304#29). The mentioned patch
> > > features/all/lockdown/0031-tracefs-Restrict-tracefs-when-the-kernel-is-locked-d.patch
> > > is a backport of https://patchwork.kernel.org/patch/11069661/ with
> > > only change that it is converted back to the non-LSM lockdown API.
> >
> > So that's a debian kernel specific issue?
>
> "yes". A kernel build without the above patch does not exhibit the
> issue. So the issue is specific to that lockdown patch ("tracefs:
> Restrict tracefs when the kernel is locked down").
>
> Steven and Matthew are both CC'ed.
From what I understand, Matthew's "lockdown" work is to prevent the
system from doing anything to see what is happening in the kernel. This
includes tracefs. This looks like it is working as designed.
Perhaps it's something in debian setup that needs to keep tracefs from
being selected as "lockdown", otherwise anything that tries to access
it, will have these issues.
-- Steve
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: BUG: kernel NULL pointer dereference, address: 0000000000000000
2019-08-12 15:28 ` Steven Rostedt
@ 2019-08-12 16:24 ` Matthew Garrett
0 siblings, 0 replies; 10+ messages in thread
From: Matthew Garrett @ 2019-08-12 16:24 UTC (permalink / raw)
To: Steven Rostedt
Cc: Salvatore Bonaccorso, Thomas Gleixner, Paul Menzel, Jacob Pan,
Len Brown, x86, LKML, linux-pm
On Mon, Aug 12, 2019 at 8:29 AM Steven Rostedt <rostedt@goodmis.org> wrote:
> From what I understand, Matthew's "lockdown" work is to prevent the
> system from doing anything to see what is happening in the kernel. This
> includes tracefs. This looks like it is working as designed.
Oopsing the kernel isn't working as designed. Ben has a patch to fix this.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-08-12 16:24 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-10 16:33 [Linux 5.2.7] powertop --auto-tune: BUG: kernel NULL pointer dereference, address: 0000000000000000 Paul Menzel
2019-08-10 17:31 ` Thomas Gleixner
2019-08-10 18:28 ` Paul Menzel
2019-08-10 21:11 ` [Linux 5.2.x] /sys/kernel/debug/tracing/events/power/cpu_idle/id: " Paul Menzel
2019-08-11 6:22 ` Thomas Gleixner
2019-08-11 9:46 ` Salvatore Bonaccorso
2019-08-11 12:58 ` Thomas Gleixner
2019-08-11 15:33 ` Salvatore Bonaccorso
2019-08-12 15:28 ` Steven Rostedt
2019-08-12 16:24 ` Matthew Garrett
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).