* [PATCH] staging: rtl8192u: fix spacing errors
@ 2019-08-11 22:51 Stephen Brennan
0 siblings, 0 replies; only message in thread
From: Stephen Brennan @ 2019-08-11 22:51 UTC (permalink / raw)
To: Greg Kroah-Hartman, devel, linux-kernel; +Cc: Stephen Brennan
Used checkpatch's --fix-inplace option for types SPACING, OPEN_BRACE,
ELSE_AFTER_BRACE. Manually edited the resulting changes to correct for
mistaken fixes and complete fixes that were only partially applied.
Signed-off-by: Stephen Brennan <stephen@brennan.io>
---
To prevent this patch from getting even longer and more unwieldy, I tried
to limit the scope of this change to *just* the automatic fixes created by
checkpatch, and my corrections. Hopefully I'll send further patches to
address categories of errors which were not automatically fixable by
checkpatch.
Before: 289 errors, 303 warnings, 206 checks, 2612 lines checked
After: 37 errors, 307 warnings, 175 checks, 2562 lines checked
.../staging/rtl8192u/ieee80211/ieee80211_rx.c | 455 ++++++++----------
1 file changed, 200 insertions(+), 255 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 0a3e478fccd6..7ef1e89de269 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -124,7 +124,7 @@ ieee80211_frag_cache_get(struct ieee80211_device *ieee,
2 /* alignment */ +
8 /* WEP */ +
ETH_ALEN /* WDS */ +
- (IEEE80211_QOS_HAS_SEQ(fc)?2:0) /* QOS Control */);
+ (IEEE80211_QOS_HAS_SEQ(fc) ? 2 : 0) /* QOS Control */);
if (!skb)
return NULL;
@@ -145,7 +145,7 @@ ieee80211_frag_cache_get(struct ieee80211_device *ieee,
} else {
/* received a fragment of a frame for which the head fragment
* should have already been received */
- entry = ieee80211_frag_cache_find(ieee, seq, frag, tid,hdr->addr2,
+ entry = ieee80211_frag_cache_find(ieee, seq, frag, tid, hdr->addr2,
hdr->addr1);
if (entry) {
entry->last_frag = frag;
@@ -169,7 +169,7 @@ static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
struct rtl_80211_hdr_4addrqos *hdr_4addrqos;
u8 tid;
- if(((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
+ if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
hdr_4addrqos = (struct rtl_80211_hdr_4addrqos *)hdr;
tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QCTL_TID;
tid = UP2AC(tid);
@@ -216,7 +216,7 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
struct rtl_80211_hdr_3addr *hdr = (struct rtl_80211_hdr_3addr *)skb->data;
rx_stats->len = skb->len;
- ieee80211_rx_mgt(ieee,(struct rtl_80211_hdr_4addr *)skb->data,rx_stats);
+ ieee80211_rx_mgt(ieee, (struct rtl_80211_hdr_4addr *)skb->data, rx_stats);
/* if ((ieee->state == IEEE80211_LINKED) && (memcmp(hdr->addr3, ieee->current_network.bssid, ETH_ALEN))) */
if ((memcmp(hdr->addr1, ieee->dev->dev_addr, ETH_ALEN)))/* use ADDR1 to perform address matching for Management frames */
{
@@ -281,11 +281,11 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-static unsigned char rfc1042_header[] =
-{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+static unsigned char rfc1042_header[] = {
+ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-static unsigned char bridge_tunnel_header[] =
-{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
+static unsigned char bridge_tunnel_header[] = {
+ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
/* No encapsulation header if EtherType < 0x600 (=length) */
/* Called by ieee80211_rx_frame_decrypt */
@@ -300,7 +300,7 @@ static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee,
if (skb->len < 24)
return 0;
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
fc = le16_to_cpu(hdr->frame_ctl);
/* check that the frame is unicast frame to us */
@@ -341,10 +341,10 @@ ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
return 0;
if (ieee->hwsec_active)
{
- struct cb_desc *tcb_desc = (struct cb_desc *)(skb->cb+ MAX_DEV_ADDR_SIZE);
+ struct cb_desc *tcb_desc = (struct cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bHwSec = 1;
}
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
if (ieee->tkip_countermeasures &&
@@ -388,11 +388,11 @@ ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee, struct sk_buff *s
return 0;
if (ieee->hwsec_active)
{
- struct cb_desc *tcb_desc = (struct cb_desc *)(skb->cb+ MAX_DEV_ADDR_SIZE);
+ struct cb_desc *tcb_desc = (struct cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bHwSec = 1;
}
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
atomic_inc(&crypt->refcnt);
@@ -410,7 +410,7 @@ ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee, struct sk_buff *s
/* this function is stolen from ipw2200 driver*/
-#define IEEE_PACKET_RETRY_TIME (5*HZ)
+#define IEEE_PACKET_RETRY_TIME (5 * HZ)
static int is_duplicate_packet(struct ieee80211_device *ieee,
struct rtl_80211_hdr_4addr *header)
{
@@ -426,12 +426,12 @@ static int is_duplicate_packet(struct ieee80211_device *ieee,
//TO2DS and QoS
- if(((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
+ if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
hdr_4addrqos = (struct rtl_80211_hdr_4addrqos *)header;
tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QCTL_TID;
tid = UP2AC(tid);
tid++;
- } else if(IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
+ } else if (IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
hdr_3addrqos = (struct rtl_80211_hdr_3addrqos *)header;
tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QCTL_TID;
tid = UP2AC(tid);
@@ -507,7 +507,7 @@ static int is_duplicate_packet(struct ieee80211_device *ieee,
static bool AddReorderEntry(struct rx_ts_record *pTS, struct rx_reorder_entry *pReorderEntry)
{
struct list_head *pList = &pTS->rx_pending_pkt_list;
- while(pList->next != &pTS->rx_pending_pkt_list)
+ while (pList->next != &pTS->rx_pending_pkt_list)
{
if (SN_LESS(pReorderEntry->SeqNum, list_entry(pList->next, struct rx_reorder_entry, List)->SeqNum))
pList = pList->next;
@@ -524,17 +524,17 @@ static bool AddReorderEntry(struct rx_ts_record *pTS, struct rx_reorder_entry *p
return true;
}
-void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb **prxbIndicateArray,u8 index)
+void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb **prxbIndicateArray, u8 index)
{
- u8 i = 0 , j=0;
+ u8 i = 0, j = 0;
u16 ethertype;
// if(index > 1)
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): hahahahhhh, We indicate packet from reorder list, index is %u\n",__func__,index);
- for(j = 0; j<index; j++)
+ for (j = 0; j < index; j++)
{
//added by amy for reorder
struct ieee80211_rxb *prxb = prxbIndicateArray[j];
- for(i = 0; i<prxb->nr_subframes; i++) {
+ for (i = 0; i < prxb->nr_subframes; i++) {
struct sk_buff *sub_skb = prxb->subframes[i];
/* convert hdr + possible LLC headers into Ethernet header */
@@ -585,7 +585,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
u16 WinEnd = (pTS->rx_indicate_seq + WinSize - 1) % 4096;
u8 index = 0;
bool bMatchWinStart = false, bPktInBuf = false;
- IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): Seq is %d,pTS->rx_indicate_seq is %d, WinSize is %d\n",__func__,SeqNum,pTS->rx_indicate_seq,WinSize);
+ IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): Seq is %d,pTS->rx_indicate_seq is %d, WinSize is %d\n", __func__, SeqNum, pTS->rx_indicate_seq, WinSize);
prxbIndicateArray = kmalloc_array(REORDER_WIN_SIZE,
sizeof(struct ieee80211_rxb *),
@@ -599,12 +599,12 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
/* Drop out the packet which SeqNum is smaller than WinStart */
if (SN_LESS(SeqNum, pTS->rx_indicate_seq)) {
- IEEE80211_DEBUG(IEEE80211_DL_REORDER,"Packet Drop! IndicateSeq: %d, NewSeq: %d\n",
+ IEEE80211_DEBUG(IEEE80211_DL_REORDER, "Packet Drop! IndicateSeq: %d, NewSeq: %d\n",
pTS->rx_indicate_seq, SeqNum);
pHTInfo->RxReorderDropCounter++;
{
int i;
- for(i =0; i < prxb->nr_subframes; i++) {
+ for (i = 0; i < prxb->nr_subframes; i++) {
dev_kfree_skb(prxb->subframes[i]);
}
kfree(prxb);
@@ -620,16 +620,16 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
* 1. Incoming SeqNum is equal to WinStart =>Window shift 1
* 2. Incoming SeqNum is larger than the WinEnd => Window shift N
*/
- if(SN_EQUAL(SeqNum, pTS->rx_indicate_seq)) {
+ if (SN_EQUAL(SeqNum, pTS->rx_indicate_seq)) {
pTS->rx_indicate_seq = (pTS->rx_indicate_seq + 1) % 4096;
bMatchWinStart = true;
- } else if(SN_LESS(WinEnd, SeqNum)) {
- if(SeqNum >= (WinSize - 1)) {
- pTS->rx_indicate_seq = SeqNum + 1 -WinSize;
+ } else if (SN_LESS(WinEnd, SeqNum)) {
+ if (SeqNum >= (WinSize - 1)) {
+ pTS->rx_indicate_seq = SeqNum + 1 - WinSize;
} else {
pTS->rx_indicate_seq = 4095 - (WinSize - (SeqNum + 1)) + 1;
}
- IEEE80211_DEBUG(IEEE80211_DL_REORDER, "Window Shift! IndicateSeq: %d, NewSeq: %d\n",pTS->rx_indicate_seq, SeqNum);
+ IEEE80211_DEBUG(IEEE80211_DL_REORDER, "Window Shift! IndicateSeq: %d, NewSeq: %d\n", pTS->rx_indicate_seq, SeqNum);
}
/*
@@ -641,7 +641,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
* 1. All packets with SeqNum smaller than WinStart => Indicate
* 2. All packets with SeqNum larger than or equal to WinStart => Buffer it.
*/
- if(bMatchWinStart) {
+ if (bMatchWinStart) {
/* Current packet is going to be indicated.*/
IEEE80211_DEBUG(IEEE80211_DL_REORDER, "Packets indication!! IndicateSeq: %d, NewSeq: %d\n",\
pTS->rx_indicate_seq, SeqNum);
@@ -651,7 +651,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
} else {
/* Current packet is going to be inserted into pending list.*/
//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to ordered list\n",__func__);
- if(!list_empty(&ieee->RxReorder_Unused_List)) {
+ if (!list_empty(&ieee->RxReorder_Unused_List)) {
pReorderEntry = list_entry(ieee->RxReorder_Unused_List.next, struct rx_reorder_entry, List);
list_del_init(&pReorderEntry->List);
@@ -660,13 +660,13 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
pReorderEntry->prxb = prxb;
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pREorderEntry->SeqNum is %d\n",__func__,pReorderEntry->SeqNum);
- if(!AddReorderEntry(pTS, pReorderEntry)) {
+ if (!AddReorderEntry(pTS, pReorderEntry)) {
IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): Duplicate packet is dropped!! IndicateSeq: %d, NewSeq: %d\n",
__func__, pTS->rx_indicate_seq, SeqNum);
- list_add_tail(&pReorderEntry->List,&ieee->RxReorder_Unused_List);
+ list_add_tail(&pReorderEntry->List, &ieee->RxReorder_Unused_List);
{
int i;
- for(i =0; i < prxb->nr_subframes; i++) {
+ for (i = 0; i < prxb->nr_subframes; i++) {
dev_kfree_skb(prxb->subframes[i]);
}
kfree(prxb);
@@ -674,10 +674,9 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
}
} else {
IEEE80211_DEBUG(IEEE80211_DL_REORDER,
- "Pkt insert into buffer!! IndicateSeq: %d, NewSeq: %d\n",pTS->rx_indicate_seq, SeqNum);
+ "Pkt insert into buffer!! IndicateSeq: %d, NewSeq: %d\n", pTS->rx_indicate_seq, SeqNum);
}
- }
- else {
+ } else {
/*
* Packets are dropped if there is not enough reorder entries.
* This part shall be modified!! We can just indicate all the
@@ -686,7 +685,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): There is no reorder entry!! Packet is dropped!!\n");
{
int i;
- for(i =0; i < prxb->nr_subframes; i++) {
+ for (i = 0; i < prxb->nr_subframes; i++) {
dev_kfree_skb(prxb->subframes[i]);
}
kfree(prxb);
@@ -696,8 +695,8 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
}
/* Check if there is any packet need indicate.*/
- while(!list_empty(&pTS->rx_pending_pkt_list)) {
- IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): start RREORDER indicate\n",__func__);
+ while (!list_empty(&pTS->rx_pending_pkt_list)) {
+ IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): start RREORDER indicate\n", __func__);
pReorderEntry = list_entry(pTS->rx_pending_pkt_list.prev, struct rx_reorder_entry, List);
if (SN_LESS(pReorderEntry->SeqNum, pTS->rx_indicate_seq) ||
SN_EQUAL(pReorderEntry->SeqNum, pTS->rx_indicate_seq))
@@ -711,15 +710,15 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
list_del_init(&pReorderEntry->List);
- if(SN_EQUAL(pReorderEntry->SeqNum, pTS->rx_indicate_seq))
+ if (SN_EQUAL(pReorderEntry->SeqNum, pTS->rx_indicate_seq))
pTS->rx_indicate_seq = (pTS->rx_indicate_seq + 1) % 4096;
- IEEE80211_DEBUG(IEEE80211_DL_REORDER,"Packets indication!! IndicateSeq: %d, NewSeq: %d\n",pTS->rx_indicate_seq, SeqNum);
+ IEEE80211_DEBUG(IEEE80211_DL_REORDER, "Packets indication!! IndicateSeq: %d, NewSeq: %d\n", pTS->rx_indicate_seq, SeqNum);
prxbIndicateArray[index] = pReorderEntry->prxb;
// printk("========================>%s(): pReorderEntry->SeqNum is %d\n",__func__,pReorderEntry->SeqNum);
index++;
- list_add_tail(&pReorderEntry->List,&ieee->RxReorder_Unused_List);
+ list_add_tail(&pReorderEntry->List, &ieee->RxReorder_Unused_List);
} else {
bPktInBuf = true;
break;
@@ -727,13 +726,13 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
}
/* Handling pending timer. Set this timer to prevent from long time Rx buffering.*/
- if (index>0) {
+ if (index > 0) {
// Cancel previous pending timer.
// del_timer_sync(&pTS->rx_pkt_pending_timer);
pTS->rx_timeout_indicate_seq = 0xffff;
// Indicate packets
- if(index>REORDER_WIN_SIZE){
+ if (index > REORDER_WIN_SIZE) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): Rx Reorder buffer full!! \n");
kfree(prxbIndicateArray);
return;
@@ -743,9 +742,9 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
if (bPktInBuf && pTS->rx_timeout_indicate_seq == 0xffff) {
// Set new pending timer.
- IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): SET rx timeout timer\n", __func__);
+ IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): SET rx timeout timer\n", __func__);
pTS->rx_timeout_indicate_seq = pTS->rx_indicate_seq;
- if(timer_pending(&pTS->rx_pkt_pending_timer))
+ if (timer_pending(&pTS->rx_pkt_pending_timer))
del_timer_sync(&pTS->rx_pkt_pending_timer);
pTS->rx_pkt_pending_timer.expires = jiffies +
msecs_to_jiffies(pHTInfo->RxReorderPendingTime);
@@ -762,12 +761,12 @@ static u8 parse_subframe(struct sk_buff *skb,
struct rtl_80211_hdr_3addr *hdr = (struct rtl_80211_hdr_3addr *)skb->data;
u16 fc = le16_to_cpu(hdr->frame_ctl);
- u16 LLCOffset= sizeof(struct rtl_80211_hdr_3addr);
+ u16 LLCOffset = sizeof(struct rtl_80211_hdr_3addr);
u16 ChkLength;
bool bIsAggregateFrame = false;
u16 nSubframe_Length;
u8 nPadding_Length = 0;
- u16 SeqNum=0;
+ u16 SeqNum = 0;
struct sk_buff *sub_skb;
/* just for debug purpose */
@@ -793,7 +792,7 @@ static u8 parse_subframe(struct sk_buff *skb,
skb_pull(skb, LLCOffset);
- if(!bIsAggregateFrame) {
+ if (!bIsAggregateFrame) {
rxb->nr_subframes = 1;
#ifdef JOHN_NOCPY
rxb->subframes[0] = skb;
@@ -801,26 +800,26 @@ static u8 parse_subframe(struct sk_buff *skb,
rxb->subframes[0] = skb_copy(skb, GFP_ATOMIC);
#endif
- memcpy(rxb->src,src,ETH_ALEN);
- memcpy(rxb->dst,dst,ETH_ALEN);
+ memcpy(rxb->src, src, ETH_ALEN);
+ memcpy(rxb->dst, dst, ETH_ALEN);
//IEEE80211_DEBUG_DATA(IEEE80211_DL_RX,skb->data,skb->len);
return 1;
} else {
rxb->nr_subframes = 0;
- memcpy(rxb->src,src,ETH_ALEN);
- memcpy(rxb->dst,dst,ETH_ALEN);
- while(skb->len > ETHERNET_HEADER_SIZE) {
+ memcpy(rxb->src, src, ETH_ALEN);
+ memcpy(rxb->dst, dst, ETH_ALEN);
+ while (skb->len > ETHERNET_HEADER_SIZE) {
/* Offset 12 denote 2 mac address */
nSubframe_Length = *((u16 *)(skb->data + 12));
//==m==>change the length order
- nSubframe_Length = (nSubframe_Length>>8) + (nSubframe_Length<<8);
+ nSubframe_Length = (nSubframe_Length >> 8) + (nSubframe_Length << 8);
- if (skb->len<(ETHERNET_HEADER_SIZE + nSubframe_Length)) {
+ if (skb->len < (ETHERNET_HEADER_SIZE + nSubframe_Length)) {
printk("%s: A-MSDU parse error!! pRfd->nTotalSubframe : %d\n",\
__func__, rxb->nr_subframes);
- printk("%s: A-MSDU parse error!! Subframe Length: %d\n",__func__, nSubframe_Length);
- printk("nRemain_Length is %d and nSubframe_Length is : %d\n",skb->len,nSubframe_Length);
- printk("The Packet SeqNum is %d\n",SeqNum);
+ printk("%s: A-MSDU parse error!! Subframe Length: %d\n", __func__, nSubframe_Length);
+ printk("nRemain_Length is %d and nSubframe_Length is : %d\n", skb->len, nSubframe_Length);
+ printk("The Packet SeqNum is %d\n", SeqNum);
return 0;
}
@@ -925,7 +924,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
if (HTCCheck(ieee, skb->data))
{
- if(net_ratelimit())
+ if (net_ratelimit())
printk("find HTCControl\n");
hdrlen += 4;
rx_stats->bContainHTC = true;
@@ -972,7 +971,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
* stations that do not support WEP key mapping). */
if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key)
- (void) hostap_handle_sta_crypto(local, hdr, &crypt,
+ (void)hostap_handle_sta_crypto(local, hdr, &crypt,
&sta);
#endif
@@ -998,18 +997,16 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
goto rx_dropped;
// if QoS enabled, should check the sequence for each of the AC
- if ((!ieee->pHTInfo->bCurRxReorderEnable) || !ieee->current_network.qos_data.active|| !IsDataFrame(skb->data) || IsLegacyDataFrame(skb->data)) {
+ if ((!ieee->pHTInfo->bCurRxReorderEnable) || !ieee->current_network.qos_data.active || !IsDataFrame(skb->data) || IsLegacyDataFrame(skb->data)) {
if (is_duplicate_packet(ieee, hdr))
goto rx_dropped;
- }
- else
- {
+ } else {
struct rx_ts_record *pRxTS = NULL;
//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): QOS ENABLE AND RECEIVE QOS DATA , we will get Ts, tid:%d\n",__func__, tid);
- if(GetTs(
+ if (GetTs(
ieee,
- (struct ts_common_info **) &pRxTS,
+ (struct ts_common_info **)&pRxTS,
hdr->addr2,
Frame_QoSTID((u8 *)(skb->data)),
RX_DIR,
@@ -1017,20 +1014,16 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
{
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pRxTS->rx_last_frag_num is %d,frag is %d,pRxTS->rx_last_seq_num is %d,seq is %d\n",__func__,pRxTS->rx_last_frag_num,frag,pRxTS->rx_last_seq_num,WLAN_GET_SEQ_SEQ(sc));
- if ((fc & (1<<11)) &&
+ if ((fc & (1 << 11)) &&
(frag == pRxTS->rx_last_frag_num) &&
(WLAN_GET_SEQ_SEQ(sc) == pRxTS->rx_last_seq_num)) {
goto rx_dropped;
- }
- else
- {
+ } else {
pRxTS->rx_last_frag_num = frag;
pRxTS->rx_last_seq_num = WLAN_GET_SEQ_SEQ(sc);
}
- }
- else
- {
- IEEE80211_DEBUG(IEEE80211_DL_ERR, "%s(): No TS!! Skip the check!!\n",__func__);
+ } else {
+ IEEE80211_DEBUG(IEEE80211_DL_ERR, "%s(): No TS!! Skip the check!!\n", __func__);
goto rx_dropped;
}
}
@@ -1133,7 +1126,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
}
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
/* skb: hdr + (possibly fragmented) plaintext payload */
// PR: FIXME: hostap has additional conditions in the "if" below:
@@ -1185,7 +1178,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
/* this was the last fragment and the frame will be
* delivered, so remove skb from fragment cache */
skb = frag_skb;
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
ieee80211_frag_cache_invalidate(ieee, hdr);
}
@@ -1202,7 +1195,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
ieee->LinkDetectInfo.NumRecvDataInPeriod++;
ieee->LinkDetectInfo.NumRxOkInPeriod++;
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep) {
if (/*ieee->ieee802_1x &&*/
ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
@@ -1254,8 +1247,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
{
TID = Frame_QoSTID(skb->data);
SeqNum = WLAN_GET_SEQ_SEQ(sc);
- GetTs(ieee,(struct ts_common_info **) &pTS,hdr->addr2,TID,RX_DIR,true);
- if (TID !=0 && TID !=3)
+ GetTs(ieee, (struct ts_common_info **) &pTS, hdr->addr2, TID, RX_DIR, true);
+ if (TID != 0 && TID != 3)
{
ieee->bis_any_nonbepkts = true;
}
@@ -1270,7 +1263,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
/* qos data packets & reserved bit is 1 */
if (parse_subframe(skb, rx_stats, rxb, src, dst) == 0) {
/* only to free rxb, and not submit the packets to upper layer */
- for(i =0; i < rxb->nr_subframes; i++) {
+ for (i = 0; i < rxb->nr_subframes; i++) {
dev_kfree_skb(rxb->subframes[i]);
}
kfree(rxb);
@@ -1281,7 +1274,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
//added by amy for reorder
if (!ieee->pHTInfo->bCurRxReorderEnable || !pTS) {
//added by amy for reorder
- for(i = 0; i<rxb->nr_subframes; i++) {
+ for (i = 0; i < rxb->nr_subframes; i++) {
struct sk_buff *sub_skb = rxb->subframes[i];
if (sub_skb) {
@@ -1324,10 +1317,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
kfree(rxb);
rxb = NULL;
- }
- else
- {
- IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): REORDER ENABLE AND PTS not NULL, and we will enter RxReorderIndicatePacket()\n",__func__);
+ } else {
+ IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): REORDER ENABLE AND PTS not NULL, and we will enter RxReorderIndicatePacket()\n", __func__);
RxReorderIndicatePacket(ieee, rxb, pTS, SeqNum);
}
#ifndef JOHN_NOCPY
@@ -1407,10 +1398,9 @@ static int ieee80211_read_qos_param_element(struct ieee80211_qos_parameter_info
/*
* Parse a QoS information element
*/
-static int ieee80211_read_qos_info_element(struct
- ieee80211_qos_information_element
- *element_info, struct ieee80211_info_element
- *info_element)
+static int ieee80211_read_qos_info_element(
+ struct ieee80211_qos_information_element *element_info,
+ struct ieee80211_info_element *info_element)
{
int ret = 0;
u16 size = sizeof(struct ieee80211_qos_information_element) - 2;
@@ -1438,11 +1428,9 @@ static int ieee80211_read_qos_info_element(struct
/*
* Write QoS parameters from the ac parameters.
*/
-static int ieee80211_qos_convert_ac_to_parameters(struct
- ieee80211_qos_parameter_info
- *param_elm, struct
- ieee80211_qos_parameters
- *qos_param)
+static int ieee80211_qos_convert_ac_to_parameters(
+ struct ieee80211_qos_parameter_info *param_elm,
+ struct ieee80211_qos_parameters *qos_param)
{
int i;
struct ieee80211_qos_ac_parameter *ac_params;
@@ -1455,12 +1443,12 @@ static int ieee80211_qos_convert_ac_to_parameters(struct
aci = (ac_params->aci_aifsn & 0x60) >> 5;
- if(aci >= QOS_QUEUE_NUM)
+ if (aci >= QOS_QUEUE_NUM)
continue;
qos_param->aifs[aci] = (ac_params->aci_aifsn) & 0x0f;
/* WMM spec P.11: The minimum value for AIFSN shall be 2 */
- qos_param->aifs[aci] = (qos_param->aifs[aci] < 2) ? 2:qos_param->aifs[aci];
+ qos_param->aifs[aci] = (qos_param->aifs[aci] < 2) ? 2 : qos_param->aifs[aci];
qos_param->cw_min[aci] =
cpu_to_le16(ac_params->ecw_min_max & 0x0F);
@@ -1563,7 +1551,7 @@ static inline void ieee80211_extract_country_ie(
{
if (IS_DOT11D_ENABLE(ieee))
{
- if (info_element->len!= 0)
+ if (info_element->len != 0)
{
memcpy(network->CountryIeBuf, info_element->data, info_element->len);
network->CountryIeLen = info_element->len;
@@ -1579,7 +1567,7 @@ static inline void ieee80211_extract_country_ie(
// some AP (e.g. Cisco 1242) don't include country IE in their
// probe response frame.
//
- if (IS_EQUAL_CIE_SRC(ieee, addr2) )
+ if (IS_EQUAL_CIE_SRC(ieee, addr2))
{
UPDATE_CIE_WATCHDOG(ieee);
}
@@ -1595,9 +1583,9 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
{
u8 i;
short offset;
- u16 tmp_htcap_len=0;
- u16 tmp_htinfo_len=0;
- u16 ht_realtek_agg_len=0;
+ u16 tmp_htcap_len = 0;
+ u16 tmp_htinfo_len = 0;
+ u16 ht_realtek_agg_len = 0;
u8 ht_realtek_agg_buf[MAX_IE_LEN];
// u16 broadcom_len = 0;
#ifdef CONFIG_IEEE80211_DEBUG
@@ -1628,7 +1616,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
}
network->ssid_len = min(info_element->len,
- (u8) IW_ESSID_MAX_SIZE);
+ (u8)IW_ESSID_MAX_SIZE);
memcpy(network->ssid, info_element->data, network->ssid_len);
if (network->ssid_len < IW_ESSID_MAX_SIZE)
memset(network->ssid + network->ssid_len, 0,
@@ -1707,14 +1695,14 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
break;
case MFIE_TYPE_TIM:
- if(info_element->len < 4)
+ if (info_element->len < 4)
break;
network->tim.tim_count = info_element->data[0];
network->tim.tim_period = info_element->data[1];
network->dtim_period = info_element->data[1];
- if(ieee->state != IEEE80211_LINKED)
+ if (ieee->state != IEEE80211_LINKED)
break;
network->last_dtim_sta_time[0] = stats->mac_time[0];
@@ -1722,22 +1710,22 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
network->dtim_data = IEEE80211_DTIM_VALID;
- if(info_element->data[0] != 0)
+ if (info_element->data[0] != 0)
break;
- if(info_element->data[2] & 1)
+ if (info_element->data[2] & 1)
network->dtim_data |= IEEE80211_DTIM_MBCAST;
- offset = (info_element->data[2] >> 1)*2;
+ offset = (info_element->data[2] >> 1) * 2;
- if(ieee->assoc_id < 8*offset ||
- ieee->assoc_id > 8*(offset + info_element->len -3))
+ if (ieee->assoc_id < 8 * offset ||
+ ieee->assoc_id > 8 * (offset + info_element->len - 3))
break;
offset = (ieee->assoc_id / 8) - offset;// + ((aid % 8)? 0 : 1) ;
- if(info_element->data[3+offset] & (1<<(ieee->assoc_id%8)))
+ if (info_element->data[3 + offset] & (1 << (ieee->assoc_id % 8)))
network->dtim_data |= IEEE80211_DTIM_UCAST;
//IEEE80211_DEBUG_MGMT("MFIE_TYPE_TIM: partially ignored\n");
@@ -1790,42 +1778,42 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
#endif
//for HTcap and HTinfo parameters
- if(tmp_htcap_len == 0){
- if(info_element->len >= 4 &&
+ if (tmp_htcap_len == 0) {
+ if (info_element->len >= 4 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x90 &&
info_element->data[2] == 0x4c &&
info_element->data[3] == 0x033){
- tmp_htcap_len = min(info_element->len,(u8)MAX_IE_LEN);
- if(tmp_htcap_len != 0){
+ tmp_htcap_len = min(info_element->len, (u8)MAX_IE_LEN);
+ if (tmp_htcap_len != 0) {
network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
- network->bssht.bdHTCapLen = tmp_htcap_len > sizeof(network->bssht.bdHTCapBuf)?\
- sizeof(network->bssht.bdHTCapBuf):tmp_htcap_len;
- memcpy(network->bssht.bdHTCapBuf,info_element->data,network->bssht.bdHTCapLen);
+ network->bssht.bdHTCapLen = tmp_htcap_len > sizeof(network->bssht.bdHTCapBuf) ? \
+ sizeof(network->bssht.bdHTCapBuf) : tmp_htcap_len;
+ memcpy(network->bssht.bdHTCapBuf, info_element->data, network->bssht.bdHTCapLen);
}
}
- if(tmp_htcap_len != 0)
+ if (tmp_htcap_len != 0)
network->bssht.bdSupportHT = true;
else
network->bssht.bdSupportHT = false;
}
- if(tmp_htinfo_len == 0){
- if(info_element->len >= 4 &&
+ if (tmp_htinfo_len == 0) {
+ if (info_element->len >= 4 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x90 &&
info_element->data[2] == 0x4c &&
info_element->data[3] == 0x034){
- tmp_htinfo_len = min(info_element->len,(u8)MAX_IE_LEN);
- if(tmp_htinfo_len != 0){
+ tmp_htinfo_len = min(info_element->len, (u8)MAX_IE_LEN);
+ if (tmp_htinfo_len != 0) {
network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
- if(tmp_htinfo_len){
- network->bssht.bdHTInfoLen = tmp_htinfo_len > sizeof(network->bssht.bdHTInfoBuf)?\
- sizeof(network->bssht.bdHTInfoBuf):tmp_htinfo_len;
- memcpy(network->bssht.bdHTInfoBuf,info_element->data,network->bssht.bdHTInfoLen);
+ if (tmp_htinfo_len) {
+ network->bssht.bdHTInfoLen = tmp_htinfo_len > sizeof(network->bssht.bdHTInfoBuf) ? \
+ sizeof(network->bssht.bdHTInfoBuf) : tmp_htinfo_len;
+ memcpy(network->bssht.bdHTInfoBuf, info_element->data, network->bssht.bdHTInfoLen);
}
}
@@ -1833,22 +1821,22 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
}
}
- if(ieee->aggregation){
- if(network->bssht.bdSupportHT){
- if(info_element->len >= 4 &&
+ if (ieee->aggregation) {
+ if (network->bssht.bdSupportHT) {
+ if (info_element->len >= 4 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0xe0 &&
info_element->data[2] == 0x4c &&
info_element->data[3] == 0x02){
- ht_realtek_agg_len = min(info_element->len,(u8)MAX_IE_LEN);
- memcpy(ht_realtek_agg_buf,info_element->data,info_element->len);
+ ht_realtek_agg_len = min(info_element->len, (u8)MAX_IE_LEN);
+ memcpy(ht_realtek_agg_buf, info_element->data, info_element->len);
}
- if(ht_realtek_agg_len >= 5){
+ if (ht_realtek_agg_len >= 5) {
network->bssht.bdRT2RTAggregation = true;
- if((ht_realtek_agg_buf[4] == 1) && (ht_realtek_agg_buf[5] & 0x02))
+ if ((ht_realtek_agg_buf[4] == 1) && (ht_realtek_agg_buf[5] & 0x02))
network->bssht.bdRT2RTLongSlotTime = true;
}
}
@@ -1874,17 +1862,16 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
}
}
- if(info_element->len >= 3 &&
+ if (info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x0c &&
info_element->data[2] == 0x43)
{
network->ralink_cap_exist = true;
- }
- else
+ } else
network->ralink_cap_exist = false;
//added by amy for atheros AP
- if((info_element->len >= 3 &&
+ if ((info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x03 &&
info_element->data[2] == 0x7f) ||
@@ -1893,20 +1880,18 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
info_element->data[1] == 0x13 &&
info_element->data[2] == 0x74))
{
- printk("========>%s(): athros AP is exist\n",__func__);
+ printk("========>%s(): athros AP is exist\n", __func__);
network->atheros_cap_exist = true;
- }
- else
+ } else
network->atheros_cap_exist = false;
- if(info_element->len >= 3 &&
+ if (info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x40 &&
info_element->data[2] == 0x96)
{
network->cisco_cap_exist = true;
- }
- else
+ } else
network->cisco_cap_exist = false;
//added by amy for LEAP of cisco
if (info_element->len > 4 &&
@@ -1915,33 +1900,28 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
info_element->data[2] == 0x96 &&
info_element->data[3] == 0x01)
{
- if(info_element->len == 6)
+ if (info_element->len == 6)
{
memcpy(network->CcxRmState, &info_element[4], 2);
- if(network->CcxRmState[0] != 0)
+ if (network->CcxRmState[0] != 0)
{
network->bCcxRmEnable = true;
- }
- else
+ } else
network->bCcxRmEnable = false;
//
// CCXv4 Table 59-1 MBSSID Masks.
//
network->MBssidMask = network->CcxRmState[1] & 0x07;
- if(network->MBssidMask != 0)
+ if (network->MBssidMask != 0)
{
network->bMBssidValid = true;
network->MBssidMask = 0xff << (network->MBssidMask);
ether_addr_copy(network->MBssid, network->bssid);
network->MBssid[5] &= network->MBssidMask;
- }
- else
- {
+ } else {
network->bMBssidValid = false;
}
- }
- else
- {
+ } else {
network->bCcxRmEnable = false;
}
}
@@ -1951,13 +1931,10 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
info_element->data[2] == 0x96 &&
info_element->data[3] == 0x03)
{
- if(info_element->len == 5)
- {
+ if (info_element->len == 5) {
network->bWithCcxVerNum = true;
network->BssCcxVerNumber = info_element->data[4];
- }
- else
- {
+ } else {
network->bWithCcxVerNum = false;
network->BssCcxVerNumber = 0;
}
@@ -1977,19 +1954,18 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
case MFIE_TYPE_HT_CAP:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_HT_CAP: %d bytes\n",
info_element->len);
- tmp_htcap_len = min(info_element->len,(u8)MAX_IE_LEN);
- if(tmp_htcap_len != 0){
+ tmp_htcap_len = min(info_element->len, (u8)MAX_IE_LEN);
+ if (tmp_htcap_len != 0) {
network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC;
- network->bssht.bdHTCapLen = tmp_htcap_len > sizeof(network->bssht.bdHTCapBuf)?\
- sizeof(network->bssht.bdHTCapBuf):tmp_htcap_len;
- memcpy(network->bssht.bdHTCapBuf,info_element->data,network->bssht.bdHTCapLen);
+ network->bssht.bdHTCapLen = tmp_htcap_len > sizeof(network->bssht.bdHTCapBuf) ? \
+ sizeof(network->bssht.bdHTCapBuf) : tmp_htcap_len;
+ memcpy(network->bssht.bdHTCapBuf, info_element->data, network->bssht.bdHTCapLen);
//If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
// windows driver will update WMM parameters each beacon received once connected
// Linux driver is a bit different.
network->bssht.bdSupportHT = true;
- }
- else
+ } else
network->bssht.bdSupportHT = false;
break;
@@ -1997,37 +1973,33 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
case MFIE_TYPE_HT_INFO:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_HT_INFO: %d bytes\n",
info_element->len);
- tmp_htinfo_len = min(info_element->len,(u8)MAX_IE_LEN);
- if(tmp_htinfo_len){
+ tmp_htinfo_len = min(info_element->len, (u8)MAX_IE_LEN);
+ if (tmp_htinfo_len) {
network->bssht.bdHTSpecVer = HT_SPEC_VER_IEEE;
- network->bssht.bdHTInfoLen = tmp_htinfo_len > sizeof(network->bssht.bdHTInfoBuf)?\
- sizeof(network->bssht.bdHTInfoBuf):tmp_htinfo_len;
- memcpy(network->bssht.bdHTInfoBuf,info_element->data,network->bssht.bdHTInfoLen);
+ network->bssht.bdHTInfoLen = tmp_htinfo_len > sizeof(network->bssht.bdHTInfoBuf) ? \
+ sizeof(network->bssht.bdHTInfoBuf) : tmp_htinfo_len;
+ memcpy(network->bssht.bdHTInfoBuf, info_element->data, network->bssht.bdHTInfoLen);
}
break;
case MFIE_TYPE_AIRONET:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_AIRONET: %d bytes\n",
info_element->len);
- if(info_element->len >IE_CISCO_FLAG_POSITION)
+ if (info_element->len > IE_CISCO_FLAG_POSITION)
{
network->bWithAironetIE = true;
// CCX 1 spec v1.13, A01.1 CKIP Negotiation (page23):
// "A Cisco access point advertises support for CKIP in beacon and probe response packets,
// by adding an Aironet element and setting one or both of the CKIP negotiation bits."
- if( (info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_MIC) ||
- (info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_PK) )
+ if ((info_element->data[IE_CISCO_FLAG_POSITION] & SUPPORT_CKIP_MIC) ||
+ (info_element->data[IE_CISCO_FLAG_POSITION] & SUPPORT_CKIP_PK))
{
network->bCkipSupported = true;
- }
- else
- {
+ } else {
network->bCkipSupported = false;
}
- }
- else
- {
+ } else {
network->bWithAironetIE = false;
network->bCkipSupported = false;
}
@@ -2057,13 +2029,10 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
data[info_element->len];
}
- if(!network->atheros_cap_exist && !network->broadcom_cap_exist &&
- !network->cisco_cap_exist && !network->ralink_cap_exist && !network->bssht.bdRT2RTAggregation)
- {
+ if (!network->atheros_cap_exist && !network->broadcom_cap_exist &&
+ !network->cisco_cap_exist && !network->ralink_cap_exist && !network->bssht.bdRT2RTAggregation) {
network->unknown_cap_exist = true;
- }
- else
- {
+ } else {
network->unknown_cap_exist = false;
}
return 0;
@@ -2076,44 +2045,25 @@ static inline u8 ieee80211_SignalStrengthTranslate(
u8 RetSS;
// Step 1. Scale mapping.
- if(CurrSS >= 71 && CurrSS <= 100)
- {
+ if (CurrSS >= 71 && CurrSS <= 100) {
RetSS = 90 + ((CurrSS - 70) / 3);
- }
- else if(CurrSS >= 41 && CurrSS <= 70)
- {
+ } else if (CurrSS >= 41 && CurrSS <= 70) {
RetSS = 78 + ((CurrSS - 40) / 3);
- }
- else if(CurrSS >= 31 && CurrSS <= 40)
- {
+ } else if (CurrSS >= 31 && CurrSS <= 40) {
RetSS = 66 + (CurrSS - 30);
- }
- else if(CurrSS >= 21 && CurrSS <= 30)
- {
+ } else if (CurrSS >= 21 && CurrSS <= 30) {
RetSS = 54 + (CurrSS - 20);
- }
- else if(CurrSS >= 5 && CurrSS <= 20)
- {
+ } else if (CurrSS >= 5 && CurrSS <= 20) {
RetSS = 42 + (((CurrSS - 5) * 2) / 3);
- }
- else if(CurrSS == 4)
- {
+ } else if (CurrSS == 4) {
RetSS = 36;
- }
- else if(CurrSS == 3)
- {
+ } else if (CurrSS == 3) {
RetSS = 27;
- }
- else if(CurrSS == 2)
- {
+ } else if (CurrSS == 2) {
RetSS = 18;
- }
- else if(CurrSS == 1)
- {
+ } else if (CurrSS == 1) {
RetSS = 9;
- }
- else
- {
+ } else {
RetSS = CurrSS;
}
//RT_TRACE(COMP_DBG, DBG_LOUD, ("##### After Mapping: LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
@@ -2193,7 +2143,7 @@ static inline int ieee80211_network_init(
network->rsn_ie_len = 0;
if (ieee80211_parse_info_param
- (ieee,beacon->info_element, stats->len - sizeof(*beacon), network, stats))
+ (ieee, beacon->info_element, stats->len - sizeof(*beacon), network, stats))
return 1;
network->mode = 0;
@@ -2215,10 +2165,10 @@ static inline int ieee80211_network_init(
return 1;
}
- if(network->bssht.bdSupportHT){
- if(network->mode == IEEE_A)
+ if (network->bssht.bdSupportHT) {
+ if (network->mode == IEEE_A)
network->mode = IEEE_N_5G;
- else if(network->mode & (IEEE_G | IEEE_B))
+ else if (network->mode & (IEEE_G | IEEE_B))
network->mode = IEEE_N_24G;
}
if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
@@ -2226,7 +2176,7 @@ static inline int ieee80211_network_init(
stats->signal = 30 + (stats->SignalStrength * 70) / 100;
//stats->signal = ieee80211_SignalStrengthTranslate(stats->signal);
- stats->noise = ieee80211_translate_todbm((u8)(100-stats->signal)) -25;
+ stats->noise = ieee80211_translate_todbm((u8)(100 - stats->signal)) - 25;
memcpy(&network->stats, stats, sizeof(network->stats));
@@ -2290,10 +2240,10 @@ static inline void update_network(struct ieee80211_network *dst,
dst->bssht.bdSupportHT = src->bssht.bdSupportHT;
dst->bssht.bdRT2RTAggregation = src->bssht.bdRT2RTAggregation;
- dst->bssht.bdHTCapLen= src->bssht.bdHTCapLen;
- memcpy(dst->bssht.bdHTCapBuf,src->bssht.bdHTCapBuf,src->bssht.bdHTCapLen);
- dst->bssht.bdHTInfoLen= src->bssht.bdHTInfoLen;
- memcpy(dst->bssht.bdHTInfoBuf,src->bssht.bdHTInfoBuf,src->bssht.bdHTInfoLen);
+ dst->bssht.bdHTCapLen = src->bssht.bdHTCapLen;
+ memcpy(dst->bssht.bdHTCapBuf, src->bssht.bdHTCapBuf, src->bssht.bdHTCapLen);
+ dst->bssht.bdHTInfoLen = src->bssht.bdHTInfoLen;
+ memcpy(dst->bssht.bdHTInfoBuf, src->bssht.bdHTInfoBuf, src->bssht.bdHTInfoLen);
dst->bssht.bdHTSpecVer = src->bssht.bdHTSpecVer;
dst->bssht.bdRT2RTLongSlotTime = src->bssht.bdRT2RTLongSlotTime;
dst->broadcom_cap_exist = src->broadcom_cap_exist;
@@ -2312,7 +2262,7 @@ static inline void update_network(struct ieee80211_network *dst,
qos_active = dst->qos_data.active;
//old_param = dst->qos_data.old_param_count;
old_param = dst->qos_data.param_count;
- if(dst->flags & NETWORK_HAS_QOS_MASK)
+ if (dst->flags & NETWORK_HAS_QOS_MASK)
memcpy(&dst->qos_data, &src->qos_data,
sizeof(struct ieee80211_qos_data));
else {
@@ -2322,7 +2272,7 @@ static inline void update_network(struct ieee80211_network *dst,
if (dst->qos_data.supported == 1) {
dst->QoS_Enable = 1;
- if(dst->ssid_len)
+ if (dst->ssid_len)
IEEE80211_DEBUG_QOS
("QoS the network %s is QoS supported\n",
dst->ssid);
@@ -2335,9 +2285,9 @@ static inline void update_network(struct ieee80211_network *dst,
/* dst->last_associate is not overwritten */
dst->wmm_info = src->wmm_info; //sure to exist in beacon or probe response frame.
- if (src->wmm_param[0].aci_aifsn|| \
- src->wmm_param[1].aci_aifsn|| \
- src->wmm_param[2].aci_aifsn|| \
+ if (src->wmm_param[0].aci_aifsn || \
+ src->wmm_param[1].aci_aifsn || \
+ src->wmm_param[2].aci_aifsn || \
src->wmm_param[3].aci_aifsn) {
memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
}
@@ -2434,8 +2384,7 @@ static inline void ieee80211_process_probe_response(
if (fc == IEEE80211_STYPE_PROBE_RESP)
{
// Case 1: Country code
- if(IS_COUNTRY_IE_VALID(ieee) )
- {
+ if (IS_COUNTRY_IE_VALID(ieee)) {
if (!is_legal_channel(ieee, network->channel)) {
printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network->channel);
goto out;
@@ -2451,14 +2400,11 @@ static inline void ieee80211_process_probe_response(
goto out;
}
}
- }
- else
- {
+ } else {
// Case 1: Country code
- if(IS_COUNTRY_IE_VALID(ieee) )
- {
+ if (IS_COUNTRY_IE_VALID(ieee)) {
if (!is_legal_channel(ieee, network->channel)) {
- printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n",network->channel);
+ printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n", network->channel);
goto out;
}
}
@@ -2468,7 +2414,7 @@ static inline void ieee80211_process_probe_response(
// Filter over channel ch12~14
if (network->channel > 14)
{
- printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n",network->channel);
+ printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n", network->channel);
goto out;
}
}
@@ -2491,18 +2437,17 @@ static inline void ieee80211_process_probe_response(
update_network(&ieee->current_network, network);
if ((ieee->current_network.mode == IEEE_N_24G || ieee->current_network.mode == IEEE_G)
&& ieee->current_network.berp_info_valid){
- if(ieee->current_network.erp_value& ERP_UseProtection)
+ if (ieee->current_network.erp_value & ERP_UseProtection)
ieee->current_network.buseprotection = true;
else
ieee->current_network.buseprotection = false;
}
- if(is_beacon(beacon->header.frame_ctl))
+ if (is_beacon(beacon->header.frame_ctl))
{
- if(ieee->state == IEEE80211_LINKED)
+ if (ieee->state == IEEE80211_LINKED)
ieee->LinkDetectInfo.NumRecvBcnInPeriod++;
- }
- else //hidden AP
- network->flags = (~NETWORK_EMPTY_ESSID & network->flags)|(NETWORK_EMPTY_ESSID & ieee->current_network.flags);
+ } else //hidden AP
+ network->flags = (~NETWORK_EMPTY_ESSID & network->flags) | (NETWORK_EMPTY_ESSID & ieee->current_network.flags);
}
list_for_each_entry(target, &ieee->network_list, list) {
@@ -2543,8 +2488,8 @@ static inline void ieee80211_process_probe_response(
#endif
memcpy(target, network, sizeof(*target));
list_add_tail(&target->list, &ieee->network_list);
- if(ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE)
- ieee80211_softmac_new_net(ieee,network);
+ if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE)
+ ieee80211_softmac_new_net(ieee, network);
} else {
IEEE80211_DEBUG_SCAN("Updating '%s' (%pM) via %s.\n",
escape_essid(target->ssid,
@@ -2559,26 +2504,26 @@ static inline void ieee80211_process_probe_response(
*/
renew = !time_after(target->last_scanned + ieee->scan_age, jiffies);
//YJ,add,080819,for hidden ap
- if(is_beacon(beacon->header.frame_ctl) == 0)
- network->flags = (~NETWORK_EMPTY_ESSID & network->flags)|(NETWORK_EMPTY_ESSID & target->flags);
+ if (is_beacon(beacon->header.frame_ctl) == 0)
+ network->flags = (~NETWORK_EMPTY_ESSID & network->flags) | (NETWORK_EMPTY_ESSID & target->flags);
//if(strncmp(network->ssid, "linksys-c",9) == 0)
// printk("====>2 network->ssid=%s FLAG=%d target.ssid=%s FLAG=%d\n", network->ssid, network->flags, target->ssid, target->flags);
- if(((network->flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
+ if (((network->flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
&& (((network->ssid_len > 0) && (strncmp(target->ssid, network->ssid, network->ssid_len)))\
- ||((ieee->current_network.ssid_len == network->ssid_len) && (strncmp(ieee->current_network.ssid, network->ssid, network->ssid_len) == 0) && (ieee->state == IEEE80211_NOLINK))))
+ || ((ieee->current_network.ssid_len == network->ssid_len) && (strncmp(ieee->current_network.ssid, network->ssid, network->ssid_len) == 0) && (ieee->state == IEEE80211_NOLINK))))
renew = 1;
//YJ,add,080819,for hidden ap,end
update_network(target, network);
- if(renew && (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE))
- ieee80211_softmac_new_net(ieee,network);
+ if (renew && (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE))
+ ieee80211_softmac_new_net(ieee, network);
}
spin_unlock_irqrestore(&ieee->lock, flags);
if (is_beacon(beacon->header.frame_ctl) && is_same_network(&ieee->current_network, network, ieee) && \
(ieee->state == IEEE80211_LINKED)) {
if (ieee->handle_beacon)
- ieee->handle_beacon(ieee->dev,beacon,&ieee->current_network);
+ ieee->handle_beacon(ieee->dev, beacon, &ieee->current_network);
}
out:
--
2.22.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-08-11 23:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-11 22:51 [PATCH] staging: rtl8192u: fix spacing errors Stephen Brennan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).