* [PATCH v4 1/3] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
2019-08-13 7:35 [PATCH v4 0/3] iio: imu: st_lsm6dsx: Add support for LSM9DS1 Martin Kepplinger
@ 2019-08-13 7:35 ` Martin Kepplinger
2019-08-19 8:47 ` Lorenzo Bianconi
2019-08-13 7:35 ` [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1 Martin Kepplinger
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Martin Kepplinger @ 2019-08-13 7:35 UTC (permalink / raw)
To: lorenzo.bianconi83, jic23, knaack.h, lars, pmeerw
Cc: robh+dt, mark.rutland, linux-iio, devicetree, linux-kernel,
Martin Kepplinger
Move some register definitions to the per-device array of struct
st_lsm6dsx_sensor_settings in order to simplify adding new sensor
devices to the driver.
Also, remove completely unused register definitions.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 6 ++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 31 ++++++++++++++------
2 files changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 4e8e67ae1632..c8f333902eb7 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -200,6 +200,9 @@ struct st_lsm6dsx_ext_dev_settings {
/**
* struct st_lsm6dsx_settings - ST IMU sensor settings
* @wai: Sensor WhoAmI default value.
+ * @int1_addr: Control Register address for INT1
+ * @int2_addr: Control Register address for INT2
+ * @reset_addr: register address for reset/reboot
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
* @channels: IIO channels supported by the device.
@@ -213,6 +216,9 @@ struct st_lsm6dsx_ext_dev_settings {
*/
struct st_lsm6dsx_settings {
u8 wai;
+ u8 int1_addr;
+ u8 int2_addr;
+ u8 reset_addr;
u16 max_fifo_size;
struct {
enum st_lsm6dsx_hw_id hw_id;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 85824d6739ee..56e1c5262a2c 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -49,17 +49,12 @@
#include "st_lsm6dsx.h"
-#define ST_LSM6DSX_REG_INT1_ADDR 0x0d
-#define ST_LSM6DSX_REG_INT2_ADDR 0x0e
#define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK BIT(3)
#define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f
-#define ST_LSM6DSX_REG_RESET_ADDR 0x12
#define ST_LSM6DSX_REG_RESET_MASK BIT(0)
#define ST_LSM6DSX_REG_BOOT_MASK BIT(7)
#define ST_LSM6DSX_REG_BDU_ADDR 0x12
#define ST_LSM6DSX_REG_BDU_MASK BIT(6)
-#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13
-#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5)
static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
@@ -78,6 +73,9 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.wai = 0x69,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 1365,
.id = {
{
@@ -186,6 +184,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x69,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 682,
.id = {
{
@@ -294,6 +295,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6a,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 682,
.id = {
{
@@ -411,6 +415,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6c,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
{
@@ -540,6 +547,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6b,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
{
@@ -640,6 +650,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6b,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
{
@@ -1166,10 +1179,10 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
switch (drdy_pin) {
case 1:
- *drdy_reg = ST_LSM6DSX_REG_INT1_ADDR;
+ *drdy_reg = hw->settings->int1_addr;
break;
case 2:
- *drdy_reg = ST_LSM6DSX_REG_INT2_ADDR;
+ *drdy_reg = hw->settings->int2_addr;
break;
default:
dev_err(hw->dev, "unsupported data ready pin\n");
@@ -1269,7 +1282,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
int err;
/* device sw reset */
- err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
+ err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
ST_LSM6DSX_REG_RESET_MASK,
FIELD_PREP(ST_LSM6DSX_REG_RESET_MASK, 1));
if (err < 0)
@@ -1278,7 +1291,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
msleep(50);
/* reload trimming parameter */
- err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
+ err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
ST_LSM6DSX_REG_BOOT_MASK,
FIELD_PREP(ST_LSM6DSX_REG_BOOT_MASK, 1));
if (err < 0)
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
2019-08-13 7:35 [PATCH v4 0/3] iio: imu: st_lsm6dsx: Add support for LSM9DS1 Martin Kepplinger
2019-08-13 7:35 ` [PATCH v4 1/3] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct Martin Kepplinger
@ 2019-08-13 7:35 ` Martin Kepplinger
2019-08-13 7:35 ` [PATCH v4 3/3] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings Martin Kepplinger
2019-08-18 19:10 ` [PATCH v4 0/3] iio: imu: st_lsm6dsx: Add support for LSM9DS1 Jonathan Cameron
3 siblings, 0 replies; 6+ messages in thread
From: Martin Kepplinger @ 2019-08-13 7:35 UTC (permalink / raw)
To: lorenzo.bianconi83, jic23, knaack.h, lars, pmeerw
Cc: robh+dt, mark.rutland, linux-iio, devicetree, linux-kernel,
Martin Kepplinger
The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately
supported in iio/magnetometer/st_magn*) are located on a separate i2c addresses
on the bus.
For the datasheet, see https://www.st.com/resource/en/datasheet/lsm9ds1.pdf
Treat it just like the LSM6* devices and, despite it's name, hook it up
to the st_lsm6dsx driver, using it's basic functionality.
accelerometer and gyroscope are not independently clocked. It runs at the gyro
frequencies if both are enabled, see chapter 7.12 of the datasheet.
We could have handled this as a single IIO device but we have split
it up to be more consistent with the other more flexible devices.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 87 ++++++++++++++++++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 ++
5 files changed, 100 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 939058b27746..77aa0e77212d 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c,
- ism330dhcx
+ ism330dhcx and the accelerometer/gyroscope of lsm9ds1.
To compile this driver as a module, choose M here: the module
will be called st_lsm6dsx.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index c8f333902eb7..d03b5a2d8549 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -24,6 +24,7 @@
#define ST_LSM6DSR_DEV_NAME "lsm6dsr"
#define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c"
#define ST_ISM330DHCX_DEV_NAME "ism330dhcx"
+#define ST_LSM9DS1_DEV_NAME "lsm9ds1"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
@@ -37,6 +38,7 @@ enum st_lsm6dsx_hw_id {
ST_LSM6DSR_ID,
ST_LSM6DS3TRC_ID,
ST_ISM330DHCX_ID,
+ ST_LSM9DS1_ID,
ST_LSM6DSX_MAX_ID,
};
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 56e1c5262a2c..f038bb06f635 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -10,6 +10,8 @@
* +-125/+-245/+-500/+-1000/+-2000 dps
* LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer
* allowing dynamic batching of sensor data.
+ * LSM9DSx series is similar but includes an additional magnetometer, handled
+ * by a different driver.
*
* Supported sensors:
* - LSM6DS3:
@@ -30,6 +32,13 @@
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
* - FIFO size: 3KB
*
+ * - LSM9DS1:
+ * - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952
+ * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
+ * - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952
+ * - Gyroscope supported full-scale [dps]: +-245/+-500/+-2000
+ * - FIFO size: 32
+ *
* Copyright 2016 STMicroelectronics Inc.
*
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
@@ -70,7 +79,85 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3),
};
+static const struct iio_chan_spec st_lsm9dsx_gyro_channels[] = {
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x18, IIO_MOD_X, 0),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1a, IIO_MOD_Y, 1),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1c, IIO_MOD_Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
+ {
+ .wai = 0x68,
+ .int1_addr = 0x0c,
+ .int2_addr = 0x0d,
+ .reset_addr = 0x22,
+ .max_fifo_size = 32,
+ .id = {
+ {
+ .hw_id = ST_LSM9DS1_ID,
+ .name = ST_LSM9DS1_DEV_NAME,
+ },
+ },
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm9dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm9dsx_gyro_channels),
+ },
+ },
+ .odr_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x20,
+ .mask = GENMASK(7, 5),
+ },
+ .odr_avl[0] = { 10, 0x01 },
+ .odr_avl[1] = { 50, 0x02 },
+ .odr_avl[2] = { 119, 0x03 },
+ .odr_avl[3] = { 238, 0x04 },
+ .odr_avl[4] = { 476, 0x05 },
+ .odr_avl[5] = { 952, 0x06 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(7, 5),
+ },
+ .odr_avl[0] = { 15, 0x01 },
+ .odr_avl[1] = { 60, 0x02 },
+ .odr_avl[2] = { 119, 0x03 },
+ .odr_avl[3] = { 238, 0x04 },
+ .odr_avl[4] = { 476, 0x05 },
+ .odr_avl[5] = { 952, 0x06 },
+ },
+ },
+ .fs_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x20,
+ .mask = GENMASK(4, 3),
+ },
+ .fs_avl[0] = { 599, 0x0 },
+ .fs_avl[1] = { 1197, 0x2 },
+ .fs_avl[2] = { 2394, 0x3 },
+ .fs_avl[3] = { 4788, 0x1 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(4, 3),
+ },
+ .fs_avl[0] = { IIO_DEGREE_TO_RAD(245), 0x0 },
+ .fs_avl[1] = { IIO_DEGREE_TO_RAD(500), 0x1 },
+ .fs_avl[2] = { IIO_DEGREE_TO_RAD(0), 0x2 },
+ .fs_avl[3] = { IIO_DEGREE_TO_RAD(2000), 0x3 },
+ },
+ },
+ },
{
.wai = 0x69,
.int1_addr = 0x0d,
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 15c6aa5b6caa..2f1b30ff083b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -83,6 +83,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
.compatible = "st,ism330dhcx",
.data = (void *)ST_ISM330DHCX_ID,
},
+ {
+ .compatible = "st,lsm9ds1",
+ .data = (void *)ST_LSM9DS1_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -99,6 +103,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
+ { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
{},
};
MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index a8430ee11310..421ce704f346 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -83,6 +83,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
.compatible = "st,ism330dhcx",
.data = (void *)ST_ISM330DHCX_ID,
},
+ {
+ .compatible = "st,lsm9ds1",
+ .data = (void *)ST_LSM9DS1_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -99,6 +103,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
+ { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
{},
};
MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread