* [PATCH v2] vfio_pci: Replace pci_try_reset_function() with __pci_reset_function_locked() to ensure that the pci device configuration space is restored to its original state
@ 2019-08-17 11:51 hexin
2019-08-19 19:53 ` Alex Williamson
0 siblings, 1 reply; 4+ messages in thread
From: hexin @ 2019-08-17 11:51 UTC (permalink / raw)
To: Alex Williamson, kvm, linux-pci, linux-kernel; +Cc: hexin, Liu Qi, Zhang Yu
In vfio_pci_enable(), save the device's initial configuration information
and then restore the configuration in vfio_pci_disable(). However, the
execution result is not the same. Since the pci_try_reset_function()
function saves the current state before resetting, the configuration
information restored by pci_load_and_free_saved_state() will be
overwritten. The __pci_reset_function_locked() function can be used
to prevent the configuration space from being overwritten.
Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
Signed-off-by: hexin <hexin15@baidu.com>
Signed-off-by: Liu Qi <liuqi16@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
---
drivers/vfio/pci/vfio_pci.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 703948c..0220616 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -438,11 +438,20 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
/*
- * Try to reset the device. The success of this is dependent on
- * being able to lock the device, which is not always possible.
+ * Try to get the locks ourselves to prevent a deadlock. The
+ * success of this is dependent on being able to lock the device,
+ * which is not always possible.
+ * We can not use the "try" reset interface here, which will
+ * overwrite the previously restored configuration information.
*/
- if (vdev->reset_works && !pci_try_reset_function(pdev))
- vdev->needs_reset = false;
+ if (vdev->reset_works && pci_cfg_access_trylock(pdev)) {
+ if (device_trylock(&pdev->dev)) {
+ if (!__pci_reset_function_locked(pdev))
+ vdev->needs_reset = false;
+ device_unlock(&pdev->dev);
+ }
+ pci_cfg_access_unlock(pdev);
+ }
pci_restore_state(pdev);
out:
--
1.8.3.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] vfio_pci: Replace pci_try_reset_function() with __pci_reset_function_locked() to ensure that the pci device configuration space is restored to its original state
2019-08-17 11:51 [PATCH v2] vfio_pci: Replace pci_try_reset_function() with __pci_reset_function_locked() to ensure that the pci device configuration space is restored to its original state hexin
@ 2019-08-19 19:53 ` Alex Williamson
2019-08-21 15:13 ` hexin
0 siblings, 1 reply; 4+ messages in thread
From: Alex Williamson @ 2019-08-19 19:53 UTC (permalink / raw)
To: hexin; +Cc: kvm, linux-pci, linux-kernel, hexin, Liu Qi, Zhang Yu
On Sat, 17 Aug 2019 19:51:03 +0800
hexin <hexin.op@gmail.com> wrote:
> In vfio_pci_enable(), save the device's initial configuration information
> and then restore the configuration in vfio_pci_disable(). However, the
> execution result is not the same. Since the pci_try_reset_function()
> function saves the current state before resetting, the configuration
> information restored by pci_load_and_free_saved_state() will be
> overwritten. The __pci_reset_function_locked() function can be used
> to prevent the configuration space from being overwritten.
>
> Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
> Signed-off-by: hexin <hexin15@baidu.com>
> Signed-off-by: Liu Qi <liuqi16@baidu.com>
> Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
> ---
> drivers/vfio/pci/vfio_pci.c | 17 +++++++++++++----
> 1 file changed, 13 insertions(+), 4 deletions(-)
This looks good, but the subject is too long and I find the commit log
somewhat confusing. May I update these as follows?
vfio_pci: Restore original state on release
vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable(). However,
commit 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
replaced the call to __pci_reset_function_locked(), which is not wrapped
in a state save and restore, with pci_try_reset_function(), which
overwrites the restored device state with the current state before
applying it to the device. Restore use of __pci_reset_function_locked()
to return to the desired behavior.
Thanks,
Alex
> diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> index 703948c..0220616 100644
> --- a/drivers/vfio/pci/vfio_pci.c
> +++ b/drivers/vfio/pci/vfio_pci.c
> @@ -438,11 +438,20 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
> pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
>
> /*
> - * Try to reset the device. The success of this is dependent on
> - * being able to lock the device, which is not always possible.
> + * Try to get the locks ourselves to prevent a deadlock. The
> + * success of this is dependent on being able to lock the device,
> + * which is not always possible.
> + * We can not use the "try" reset interface here, which will
> + * overwrite the previously restored configuration information.
> */
> - if (vdev->reset_works && !pci_try_reset_function(pdev))
> - vdev->needs_reset = false;
> + if (vdev->reset_works && pci_cfg_access_trylock(pdev)) {
> + if (device_trylock(&pdev->dev)) {
> + if (!__pci_reset_function_locked(pdev))
> + vdev->needs_reset = false;
> + device_unlock(&pdev->dev);
> + }
> + pci_cfg_access_unlock(pdev);
> + }
>
> pci_restore_state(pdev);
> out:
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] vfio_pci: Replace pci_try_reset_function() with __pci_reset_function_locked() to ensure that the pci device configuration space is restored to its original state
2019-08-19 19:53 ` Alex Williamson
@ 2019-08-21 15:13 ` hexin
2019-08-21 16:39 ` Alex Williamson
0 siblings, 1 reply; 4+ messages in thread
From: hexin @ 2019-08-21 15:13 UTC (permalink / raw)
To: Alex Williamson; +Cc: kvm, linux-pci, linux-kernel, hexin, Liu Qi, Zhang Yu
Alex Williamson <alex.williamson@redhat.com> 于2019年8月20日周二 上午3:53写道:
>
> On Sat, 17 Aug 2019 19:51:03 +0800
> hexin <hexin.op@gmail.com> wrote:
>
> > In vfio_pci_enable(), save the device's initial configuration information
> > and then restore the configuration in vfio_pci_disable(). However, the
> > execution result is not the same. Since the pci_try_reset_function()
> > function saves the current state before resetting, the configuration
> > information restored by pci_load_and_free_saved_state() will be
> > overwritten. The __pci_reset_function_locked() function can be used
> > to prevent the configuration space from being overwritten.
> >
> > Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
> > Signed-off-by: hexin <hexin15@baidu.com>
> > Signed-off-by: Liu Qi <liuqi16@baidu.com>
> > Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
> > ---
> > drivers/vfio/pci/vfio_pci.c | 17 +++++++++++++----
> > 1 file changed, 13 insertions(+), 4 deletions(-)
>
> This looks good, but the subject is too long and I find the commit log
> somewhat confusing. May I update these as follows?
>
> vfio_pci: Restore original state on release
>
> vfio_pci_enable() saves the device's initial configuration information
> with the intent that it is restored in vfio_pci_disable(). However,
> commit 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
> replaced the call to __pci_reset_function_locked(), which is not wrapped
> in a state save and restore, with pci_try_reset_function(), which
> overwrites the restored device state with the current state before
> applying it to the device. Restore use of __pci_reset_function_locked()
> to return to the desired behavior.
>
> Thanks,
> Alex
>
>
Thanks for your update, the updated commit log is clearer than before.
At the same time, when I use checkpatch.pl to detect the patch, there
will be the
following error:
ERROR: Please use git commit description style 'commit <12+ chars of
sha1> ("<title line>")'
- ie: 'commit 890ed578df82 ("vfio-pci: Use pci "try" reset interface")'
Line 2785 ~ 2801 in checkpatch.pl, the script can't handle the commit message
which contains double quotes because of the expression `([^"]+)`. Like
the "try" above.
Maybe checkpatch.pl needs to be modified.
Thanks,
HeXin
> > diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> > index 703948c..0220616 100644
> > --- a/drivers/vfio/pci/vfio_pci.c
> > +++ b/drivers/vfio/pci/vfio_pci.c
> > @@ -438,11 +438,20 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
> > pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
> >
> > /*
> > - * Try to reset the device. The success of this is dependent on
> > - * being able to lock the device, which is not always possible.
> > + * Try to get the locks ourselves to prevent a deadlock. The
> > + * success of this is dependent on being able to lock the device,
> > + * which is not always possible.
> > + * We can not use the "try" reset interface here, which will
> > + * overwrite the previously restored configuration information.
> > */
> > - if (vdev->reset_works && !pci_try_reset_function(pdev))
> > - vdev->needs_reset = false;
> > + if (vdev->reset_works && pci_cfg_access_trylock(pdev)) {
> > + if (device_trylock(&pdev->dev)) {
> > + if (!__pci_reset_function_locked(pdev))
> > + vdev->needs_reset = false;
> > + device_unlock(&pdev->dev);
> > + }
> > + pci_cfg_access_unlock(pdev);
> > + }
> >
> > pci_restore_state(pdev);
> > out:
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] vfio_pci: Replace pci_try_reset_function() with __pci_reset_function_locked() to ensure that the pci device configuration space is restored to its original state
2019-08-21 15:13 ` hexin
@ 2019-08-21 16:39 ` Alex Williamson
0 siblings, 0 replies; 4+ messages in thread
From: Alex Williamson @ 2019-08-21 16:39 UTC (permalink / raw)
To: hexin; +Cc: kvm, linux-pci, linux-kernel, hexin, Liu Qi, Zhang Yu
On Wed, 21 Aug 2019 23:13:08 +0800
hexin <hexin.op@gmail.com> wrote:
> Alex Williamson <alex.williamson@redhat.com> 于2019年8月20日周二 上午3:53写道:
> >
> > On Sat, 17 Aug 2019 19:51:03 +0800
> > hexin <hexin.op@gmail.com> wrote:
> >
> > > In vfio_pci_enable(), save the device's initial configuration information
> > > and then restore the configuration in vfio_pci_disable(). However, the
> > > execution result is not the same. Since the pci_try_reset_function()
> > > function saves the current state before resetting, the configuration
> > > information restored by pci_load_and_free_saved_state() will be
> > > overwritten. The __pci_reset_function_locked() function can be used
> > > to prevent the configuration space from being overwritten.
> > >
> > > Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
> > > Signed-off-by: hexin <hexin15@baidu.com>
> > > Signed-off-by: Liu Qi <liuqi16@baidu.com>
> > > Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
> > > ---
> > > drivers/vfio/pci/vfio_pci.c | 17 +++++++++++++----
> > > 1 file changed, 13 insertions(+), 4 deletions(-)
> >
> > This looks good, but the subject is too long and I find the commit log
> > somewhat confusing. May I update these as follows?
> >
> > vfio_pci: Restore original state on release
> >
> > vfio_pci_enable() saves the device's initial configuration information
> > with the intent that it is restored in vfio_pci_disable(). However,
> > commit 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
> > replaced the call to __pci_reset_function_locked(), which is not wrapped
> > in a state save and restore, with pci_try_reset_function(), which
> > overwrites the restored device state with the current state before
> > applying it to the device. Restore use of __pci_reset_function_locked()
> > to return to the desired behavior.
> >
> > Thanks,
> > Alex
> >
> >
>
> Thanks for your update, the updated commit log is clearer than before.
> At the same time, when I use checkpatch.pl to detect the patch, there
> will be the
> following error:
>
> ERROR: Please use git commit description style 'commit <12+ chars of
> sha1> ("<title line>")'
> - ie: 'commit 890ed578df82 ("vfio-pci: Use pci "try" reset interface")'
>
> Line 2785 ~ 2801 in checkpatch.pl, the script can't handle the commit message
> which contains double quotes because of the expression `([^"]+)`. Like
> the "try" above.
> Maybe checkpatch.pl needs to be modified.
I think we're following the intention of the rule, and as you've
identified it's the implementation of the rule checker that's unable
to handle a commit title with internal quotes. We can ignore it, and
maybe follow up with a checkpatch.pl patch, or we could just avoid it
as follows:
vfio_pci: Restore original state on release
vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable(). However,
the commit referenced in Fixes: below replaced the call to
__pci_reset_function_locked(), which is not wrapped in a state save
and restore, with pci_try_reset_function(), which overwrites the
restored device state with the current state before applying it to the
device. Reinstate use of __pci_reset_function_locked() to return to
the desired behavior.
Thanks,
Alex
> > > diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> > > index 703948c..0220616 100644
> > > --- a/drivers/vfio/pci/vfio_pci.c
> > > +++ b/drivers/vfio/pci/vfio_pci.c
> > > @@ -438,11 +438,20 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
> > > pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
> > >
> > > /*
> > > - * Try to reset the device. The success of this is dependent on
> > > - * being able to lock the device, which is not always possible.
> > > + * Try to get the locks ourselves to prevent a deadlock. The
> > > + * success of this is dependent on being able to lock the device,
> > > + * which is not always possible.
> > > + * We can not use the "try" reset interface here, which will
> > > + * overwrite the previously restored configuration information.
> > > */
> > > - if (vdev->reset_works && !pci_try_reset_function(pdev))
> > > - vdev->needs_reset = false;
> > > + if (vdev->reset_works && pci_cfg_access_trylock(pdev)) {
> > > + if (device_trylock(&pdev->dev)) {
> > > + if (!__pci_reset_function_locked(pdev))
> > > + vdev->needs_reset = false;
> > > + device_unlock(&pdev->dev);
> > > + }
> > > + pci_cfg_access_unlock(pdev);
> > > + }
> > >
> > > pci_restore_state(pdev);
> > > out:
> >
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-08-21 16:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-17 11:51 [PATCH v2] vfio_pci: Replace pci_try_reset_function() with __pci_reset_function_locked() to ensure that the pci device configuration space is restored to its original state hexin
2019-08-19 19:53 ` Alex Williamson
2019-08-21 15:13 ` hexin
2019-08-21 16:39 ` Alex Williamson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).