[PATCH v4 1/2] dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY

[PATCH v4 1/2] dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Add a YAML schema to use the host controller driver with the
eMMC PHY on Intel's Lightning Mountain SoC.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
changes in v4:
  - As per Rob's review: validate 5.2 and 5.3
  - drop unrelated items.

changes in v3:
  - resolve 'make dt_binding_check' warnings

changes in v2:
  As per Rob Herring review comments, the following updates
 - change GPL-2.0 -> (GPL-2.0-only OR BSD-2-Clause)
 - filename is the compatible string plus .yaml
 - LGM: Lightning Mountain
 - update maintainer
 - add intel,syscon under property list
 - keep one example instead of two
---
 .../bindings/phy/intel,lgm-emmc-phy.yaml           | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
new file mode 100644
index 000000000000..16c27e817665
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+description: Binding for eMMC PHY
+
+properties:
+  compatible:
+    const: intel,lgm-emmc-phy
+
+  intel,syscon:
+    description: phandle to the emmc through syscon
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - "#phy-cells"
+  - compatible
+  - intel,syscon
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    emmc_phy: emmc_phy {
+        compatible = "intel,lgm-emmc-phy";
+        intel,syscon = <&sysconf>;
+        clocks = <&emmc>;
+        clock-names = "emmcclk";
+        #phy-cells = <0>;
+    };
+
+...
-- 
2.11.0

[PATCH v4 2/2] phy: intel-lgm-emmc: Add support for eMMC PHY

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Add support for eMMC PHY on Intel's Lightning Mountain SoC.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
chnages in v4:
 - As per Andy's review comments,the following update
 - add license_tag, macro, blank_line, error_check and grouping

changes in v3:
 - As per Andy's review comments macro optimization,aligned
   function call in proper order and udelay added.

changes in v2:
 - optimize IS_CALDONE() and IS_DLLRDY() macro
 - remove unneccessary comment
 - remove redundant assignment
 - add return the error ptr
---
 drivers/phy/Kconfig                |   1 +
 drivers/phy/Makefile               |   1 +
 drivers/phy/intel/Kconfig          |   9 ++
 drivers/phy/intel/Makefile         |   2 +
 drivers/phy/intel/phy-intel-emmc.c | 281 +++++++++++++++++++++++++++++++++++++
 5 files changed, 294 insertions(+)
 create mode 100644 drivers/phy/intel/Kconfig
 create mode 100644 drivers/phy/intel/Makefile
 create mode 100644 drivers/phy/intel/phy-intel-emmc.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 0263db2ac874..b3ed94b98d9b 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -69,5 +69,6 @@ source "drivers/phy/socionext/Kconfig"
 source "drivers/phy/st/Kconfig"
 source "drivers/phy/tegra/Kconfig"
 source "drivers/phy/ti/Kconfig"
+source "drivers/phy/intel/Kconfig"
 
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 0d9fddc498a6..3f1fc9efbbed 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -19,6 +19,7 @@ obj-y					+= broadcom/	\
 					   cadence/	\
 					   freescale/	\
 					   hisilicon/	\
+					   intel/	\
 					   marvell/	\
 					   motorola/	\
 					   mscc/	\
diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
new file mode 100644
index 000000000000..4ea6a8897cd7
--- /dev/null
+++ b/drivers/phy/intel/Kconfig
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Intel Lightning Mountain(LGM) platform
+#
+config PHY_INTEL_EMMC
+	tristate "Intel EMMC PHY driver"
+	select GENERIC_PHY
+	help
+	  Enable this to support the Intel EMMC PHY
diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
new file mode 100644
index 000000000000..6b876a75599d
--- /dev/null
+++ b/drivers/phy/intel/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_INTEL_EMMC)            += phy-intel-emmc.o
diff --git a/drivers/phy/intel/phy-intel-emmc.c b/drivers/phy/intel/phy-intel-emmc.c
new file mode 100644
index 000000000000..4f0226f37ab0
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-emmc.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel eMMC PHY driver
+ * Copyright (C) 2019 Intel, Corp.
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* eMMC phy register definitions */
+#define EMMC_PHYCTRL0_REG	0xa8
+#define DR_TY_MASK		GENMASK(30, 28)
+#define DR_TY_SHIFT(x)		(((x) << 28) & DR_TY_MASK)
+#define OTAPDLYENA		BIT(14)
+#define OTAPDLYSEL_MASK		GENMASK(13, 10)
+#define OTAPDLYSEL_SHIFT(x)	(((x) << 10) & OTAPDLYSEL_MASK)
+
+#define EMMC_PHYCTRL1_REG	0xac
+#define PDB_MASK		BIT(0)
+#define PDB_SHIFT(x)		(((x) << 0) & PDB_MASK)
+#define ENDLL_MASK		BIT(7)
+#define ENDLL_SHIFT(x)		(((x) << 7) & ENDLL_MASK)
+
+#define EMMC_PHYCTRL2_REG	0xb0
+#define FRQSEL_25M		0
+#define FRQSEL_50M		1
+#define FRQSEL_100M		2
+#define FRQSEL_150M		3
+#define FRQSEL_MASK		GENMASK(24, 22)
+#define FRQSEL_SHIFT(x)		(((x) << 22) & FRQSEL_MASK)
+
+#define EMMC_PHYSTAT_REG	0xbc
+#define CALDONE_MASK		BIT(9)
+#define DLLRDY_MASK		BIT(8)
+#define IS_CALDONE(x)	((x) & CALDONE_MASK)
+#define IS_DLLRDY(x)	((x) & DLLRDY_MASK)
+
+struct intel_emmc_phy {
+	struct regmap *syscfg;
+	struct clk *emmcclk;
+};
+
+static int intel_emmc_phy_power(struct phy *phy, bool on_off)
+{
+	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
+	unsigned int caldone;
+	unsigned int dllrdy;
+	unsigned int freqsel;
+	unsigned long rate;
+	int ret, quot;
+
+	/*
+	 * Keep phyctrl_pdb and phyctrl_endll low to allow
+	 * initialization of CALIO state M/C DFFs
+	 */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK,
+				 PDB_SHIFT(0));
+	if (ret) {
+		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Already finish power_off above */
+	if (!on_off)
+		return 0;
+
+	rate = clk_get_rate(priv->emmcclk);
+	quot = DIV_ROUND_CLOSEST(rate, 50000000);
+	if (quot > FRQSEL_150M)
+		dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+	freqsel = clamp_t(int, quot, FRQSEL_25M, FRQSEL_150M);
+
+	/*
+	 * According to the user manual, calpad calibration
+	 * cycle takes more than 2us without the minimal recommended
+	 * value, so we may need a little margin here
+	 */
+	udelay(5);
+
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK, 1);
+	if (ret) {
+		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * According to the user manual, it asks driver to wait 5us for
+	 * calpad busy trimming. However it is documented that this value is
+	 * PVT(A.K.A process,voltage and temperature) relevant, so some
+	 * failure cases are found which indicates we should be more tolerant
+	 * to calpad busy trimming.
+	 */
+	ret = regmap_read_poll_timeout(priv->syscfg, EMMC_PHYSTAT_REG,
+				       caldone, IS_CALDONE(caldone),
+				       0, 50);
+	if (ret) {
+		dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	/* Set the frequency of the DLL operation */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL2_REG, FRQSEL_MASK,
+				 FRQSEL_SHIFT(freqsel));
+	if (ret) {
+		dev_err(&phy->dev, "set the frequency of dll failed:%d\n", ret);
+		return ret;
+	}
+
+	/* Turn on the DLL */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, ENDLL_MASK,
+				 ENDLL_SHIFT(1));
+	if (ret) {
+		dev_err(&phy->dev, "turn on the dll failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * After enabling analog DLL circuits docs say that we need 10.2 us if
+	 * our source clock is at 50 MHz and that lock time scales linearly
+	 * with clock speed.  If we are powering on the PHY and the card clock
+	 * is super slow (like 100 kHZ) this could take as long as 5.1 ms as
+	 * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
+	 * Hopefully we won't be running at 100 kHz, but we should still make
+	 * sure we wait long enough.
+	 *
+	 * NOTE: There appear to be corner cases where the DLL seems to take
+	 * extra long to lock for reasons that aren't understood.  In some
+	 * extreme cases we've seen it take up to over 10ms (!).  We'll be
+	 * generous and give it 50ms.
+	 */
+	ret = regmap_read_poll_timeout(priv->syscfg,
+				       EMMC_PHYSTAT_REG,
+				       dllrdy, IS_DLLRDY(dllrdy),
+				       0, 50 * USEC_PER_MSEC);
+	if (ret) {
+		dev_err(&phy->dev, "dllrdy failed. ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int intel_emmc_phy_init(struct phy *phy)
+{
+	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
+
+	/*
+	 * We purposely get the clock here and not in probe to avoid the
+	 * circular dependency problem. We expect:
+	 * - PHY driver to probe
+	 * - SDHCI driver to start probe
+	 * - SDHCI driver to register it's clock
+	 * - SDHCI driver to get the PHY
+	 * - SDHCI driver to init the PHY
+	 *
+	 * The clock is optional, so upon any error just return it like
+	 * any other error to user.
+	 *
+	 */
+	priv->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
+	if (IS_ERR(priv->emmcclk)) {
+		dev_err(&phy->dev, "ERROR: getting emmcclk\n");
+		return PTR_ERR(priv->emmcclk);
+	}
+
+	return 0;
+}
+
+static int intel_emmc_phy_exit(struct phy *phy)
+{
+	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
+
+	clk_put(priv->emmcclk);
+
+	return 0;
+}
+
+static int intel_emmc_phy_power_on(struct phy *phy)
+{
+	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
+	int ret;
+
+	/* Drive impedance: 50 Ohm */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, DR_TY_MASK,
+				 DR_TY_SHIFT(6));
+	if (ret) {
+		dev_err(&phy->dev, "ERROR set drive-impednce-50ohm: %d\n", ret);
+		return ret;
+	}
+
+	/* Output tap delay: disable */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, OTAPDLYENA, 0);
+	if (ret) {
+		dev_err(&phy->dev, "ERROR Set output tap delay : %d\n", ret);
+		return ret;
+	}
+
+	/* Output tap delay */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG,
+				 OTAPDLYSEL_MASK, OTAPDLYSEL_SHIFT(4));
+	if (ret) {
+		dev_err(&phy->dev, "ERROR: output tap dly select: %d\n", ret);
+		return ret;
+	}
+
+	/* Power up eMMC phy analog blocks */
+	return intel_emmc_phy_power(phy, true);
+}
+
+static int intel_emmc_phy_power_off(struct phy *phy)
+{
+	/* Power down eMMC phy analog blocks */
+	return intel_emmc_phy_power(phy, false);
+}
+
+static const struct phy_ops ops = {
+	.init		= intel_emmc_phy_init,
+	.exit		= intel_emmc_phy_exit,
+	.power_on	= intel_emmc_phy_power_on,
+	.power_off	= intel_emmc_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int intel_emmc_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct intel_emmc_phy *priv;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Get eMMC phy (accessed via chiptop) regmap */
+	priv->syscfg = syscon_regmap_lookup_by_phandle(np, "intel,syscon");
+	if (IS_ERR(priv->syscfg)) {
+		dev_err(dev, "failed to find syscon\n");
+		return PTR_ERR(priv->syscfg);
+	}
+
+	generic_phy = devm_phy_create(dev, np, &ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id intel_emmc_phy_dt_ids[] = {
+	{ .compatible = "intel,lgm-emmc-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, intel_emmc_phy_dt_ids);
+
+static struct platform_driver intel_emmc_driver = {
+	.probe		= intel_emmc_phy_probe,
+	.driver		= {
+		.name	= "intel-emmc-phy",
+		.of_match_table = intel_emmc_phy_dt_ids,
+	},
+};
+
+module_platform_driver(intel_emmc_driver);
+
+MODULE_AUTHOR("Peter Harliman Liem <peter.harliman.liem@intel.com>");
+MODULE_DESCRIPTION("Intel eMMC PHY driver");
-- 
2.11.0

Re: [PATCH v4 1/2] dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY

[Rob Herring]

On Thu, Aug 22, 2019 at 5:28 AM Ramuthevar,Vadivel MuruganX
<vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
>
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>
> Add a YAML schema to use the host controller driver with the
> eMMC PHY on Intel's Lightning Mountain SoC.
>
> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> ---
> changes in v4:
>   - As per Rob's review: validate 5.2 and 5.3
>   - drop unrelated items.
>
> changes in v3:
>   - resolve 'make dt_binding_check' warnings
>
> changes in v2:
>   As per Rob Herring review comments, the following updates
>  - change GPL-2.0 -> (GPL-2.0-only OR BSD-2-Clause)
>  - filename is the compatible string plus .yaml
>  - LGM: Lightning Mountain
>  - update maintainer
>  - add intel,syscon under property list
>  - keep one example instead of two
> ---
>  .../bindings/phy/intel,lgm-emmc-phy.yaml           | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/2] phy: intel-lgm-emmc: Add support for eMMC PHY

[Andy Shevchenko]

On Thu, Aug 22, 2019 at 06:28:43PM +0800, Ramuthevar,Vadivel MuruganX wrote:
> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> 
> Add support for eMMC PHY on Intel's Lightning Mountain SoC.
> 

Thanks for an update!
One minor comment below. After addressing it
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
> ---
> chnages in v4:
>  - As per Andy's review comments,the following update
>  - add license_tag, macro, blank_line, error_check and grouping
> 
> changes in v3:
>  - As per Andy's review comments macro optimization,aligned
>    function call in proper order and udelay added.
> 
> changes in v2:
>  - optimize IS_CALDONE() and IS_DLLRDY() macro
>  - remove unneccessary comment
>  - remove redundant assignment
>  - add return the error ptr
> ---
>  drivers/phy/Kconfig                |   1 +
>  drivers/phy/Makefile               |   1 +
>  drivers/phy/intel/Kconfig          |   9 ++
>  drivers/phy/intel/Makefile         |   2 +
>  drivers/phy/intel/phy-intel-emmc.c | 281 +++++++++++++++++++++++++++++++++++++
>  5 files changed, 294 insertions(+)
>  create mode 100644 drivers/phy/intel/Kconfig
>  create mode 100644 drivers/phy/intel/Makefile
>  create mode 100644 drivers/phy/intel/phy-intel-emmc.c
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 0263db2ac874..b3ed94b98d9b 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -69,5 +69,6 @@ source "drivers/phy/socionext/Kconfig"
>  source "drivers/phy/st/Kconfig"
>  source "drivers/phy/tegra/Kconfig"
>  source "drivers/phy/ti/Kconfig"
> +source "drivers/phy/intel/Kconfig"
>  
>  endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 0d9fddc498a6..3f1fc9efbbed 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -19,6 +19,7 @@ obj-y					+= broadcom/	\
>  					   cadence/	\
>  					   freescale/	\
>  					   hisilicon/	\
> +					   intel/	\
>  					   marvell/	\
>  					   motorola/	\
>  					   mscc/	\
> diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
> new file mode 100644
> index 000000000000..4ea6a8897cd7
> --- /dev/null
> +++ b/drivers/phy/intel/Kconfig
> @@ -0,0 +1,9 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Phy drivers for Intel Lightning Mountain(LGM) platform
> +#
> +config PHY_INTEL_EMMC
> +	tristate "Intel EMMC PHY driver"
> +	select GENERIC_PHY
> +	help
> +	  Enable this to support the Intel EMMC PHY
> diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
> new file mode 100644
> index 000000000000..6b876a75599d
> --- /dev/null
> +++ b/drivers/phy/intel/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_PHY_INTEL_EMMC)            += phy-intel-emmc.o
> diff --git a/drivers/phy/intel/phy-intel-emmc.c b/drivers/phy/intel/phy-intel-emmc.c
> new file mode 100644
> index 000000000000..4f0226f37ab0
> --- /dev/null
> +++ b/drivers/phy/intel/phy-intel-emmc.c
> @@ -0,0 +1,281 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Intel eMMC PHY driver
> + * Copyright (C) 2019 Intel, Corp.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +/* eMMC phy register definitions */
> +#define EMMC_PHYCTRL0_REG	0xa8
> +#define DR_TY_MASK		GENMASK(30, 28)
> +#define DR_TY_SHIFT(x)		(((x) << 28) & DR_TY_MASK)
> +#define OTAPDLYENA		BIT(14)
> +#define OTAPDLYSEL_MASK		GENMASK(13, 10)
> +#define OTAPDLYSEL_SHIFT(x)	(((x) << 10) & OTAPDLYSEL_MASK)
> +
> +#define EMMC_PHYCTRL1_REG	0xac
> +#define PDB_MASK		BIT(0)
> +#define PDB_SHIFT(x)		(((x) << 0) & PDB_MASK)
> +#define ENDLL_MASK		BIT(7)
> +#define ENDLL_SHIFT(x)		(((x) << 7) & ENDLL_MASK)
> +
> +#define EMMC_PHYCTRL2_REG	0xb0
> +#define FRQSEL_25M		0
> +#define FRQSEL_50M		1
> +#define FRQSEL_100M		2
> +#define FRQSEL_150M		3
> +#define FRQSEL_MASK		GENMASK(24, 22)
> +#define FRQSEL_SHIFT(x)		(((x) << 22) & FRQSEL_MASK)
> +
> +#define EMMC_PHYSTAT_REG	0xbc
> +#define CALDONE_MASK		BIT(9)
> +#define DLLRDY_MASK		BIT(8)
> +#define IS_CALDONE(x)	((x) & CALDONE_MASK)
> +#define IS_DLLRDY(x)	((x) & DLLRDY_MASK)
> +
> +struct intel_emmc_phy {
> +	struct regmap *syscfg;
> +	struct clk *emmcclk;
> +};
> +
> +static int intel_emmc_phy_power(struct phy *phy, bool on_off)
> +{
> +	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
> +	unsigned int caldone;
> +	unsigned int dllrdy;
> +	unsigned int freqsel;
> +	unsigned long rate;
> +	int ret, quot;
> +
> +	/*
> +	 * Keep phyctrl_pdb and phyctrl_endll low to allow
> +	 * initialization of CALIO state M/C DFFs
> +	 */
> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK,
> +				 PDB_SHIFT(0));
> +	if (ret) {
> +		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Already finish power_off above */
> +	if (!on_off)
> +		return 0;
> +
> +	rate = clk_get_rate(priv->emmcclk);
> +	quot = DIV_ROUND_CLOSEST(rate, 50000000);
> +	if (quot > FRQSEL_150M)
> +		dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
> +	freqsel = clamp_t(int, quot, FRQSEL_25M, FRQSEL_150M);
> +
> +	/*
> +	 * According to the user manual, calpad calibration
> +	 * cycle takes more than 2us without the minimal recommended
> +	 * value, so we may need a little margin here
> +	 */
> +	udelay(5);
> +
> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK, 1);

1 is magic.

> +	if (ret) {
> +		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/*
> +	 * According to the user manual, it asks driver to wait 5us for
> +	 * calpad busy trimming. However it is documented that this value is
> +	 * PVT(A.K.A process,voltage and temperature) relevant, so some
> +	 * failure cases are found which indicates we should be more tolerant
> +	 * to calpad busy trimming.
> +	 */
> +	ret = regmap_read_poll_timeout(priv->syscfg, EMMC_PHYSTAT_REG,
> +				       caldone, IS_CALDONE(caldone),
> +				       0, 50);
> +	if (ret) {
> +		dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Set the frequency of the DLL operation */
> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL2_REG, FRQSEL_MASK,
> +				 FRQSEL_SHIFT(freqsel));
> +	if (ret) {
> +		dev_err(&phy->dev, "set the frequency of dll failed:%d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Turn on the DLL */
> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, ENDLL_MASK,
> +				 ENDLL_SHIFT(1));
> +	if (ret) {
> +		dev_err(&phy->dev, "turn on the dll failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/*
> +	 * After enabling analog DLL circuits docs say that we need 10.2 us if
> +	 * our source clock is at 50 MHz and that lock time scales linearly
> +	 * with clock speed.  If we are powering on the PHY and the card clock
> +	 * is super slow (like 100 kHZ) this could take as long as 5.1 ms as
> +	 * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
> +	 * Hopefully we won't be running at 100 kHz, but we should still make
> +	 * sure we wait long enough.
> +	 *
> +	 * NOTE: There appear to be corner cases where the DLL seems to take
> +	 * extra long to lock for reasons that aren't understood.  In some
> +	 * extreme cases we've seen it take up to over 10ms (!).  We'll be
> +	 * generous and give it 50ms.
> +	 */
> +	ret = regmap_read_poll_timeout(priv->syscfg,
> +				       EMMC_PHYSTAT_REG,
> +				       dllrdy, IS_DLLRDY(dllrdy),
> +				       0, 50 * USEC_PER_MSEC);
> +	if (ret) {
> +		dev_err(&phy->dev, "dllrdy failed. ret=%d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int intel_emmc_phy_init(struct phy *phy)
> +{
> +	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
> +
> +	/*
> +	 * We purposely get the clock here and not in probe to avoid the
> +	 * circular dependency problem. We expect:
> +	 * - PHY driver to probe
> +	 * - SDHCI driver to start probe
> +	 * - SDHCI driver to register it's clock
> +	 * - SDHCI driver to get the PHY
> +	 * - SDHCI driver to init the PHY
> +	 *
> +	 * The clock is optional, so upon any error just return it like
> +	 * any other error to user.
> +	 *
> +	 */
> +	priv->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
> +	if (IS_ERR(priv->emmcclk)) {
> +		dev_err(&phy->dev, "ERROR: getting emmcclk\n");
> +		return PTR_ERR(priv->emmcclk);
> +	}
> +
> +	return 0;
> +}
> +
> +static int intel_emmc_phy_exit(struct phy *phy)
> +{
> +	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
> +
> +	clk_put(priv->emmcclk);
> +
> +	return 0;
> +}
> +
> +static int intel_emmc_phy_power_on(struct phy *phy)
> +{
> +	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
> +	int ret;
> +
> +	/* Drive impedance: 50 Ohm */
> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, DR_TY_MASK,
> +				 DR_TY_SHIFT(6));
> +	if (ret) {
> +		dev_err(&phy->dev, "ERROR set drive-impednce-50ohm: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Output tap delay: disable */
> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, OTAPDLYENA, 0);
> +	if (ret) {
> +		dev_err(&phy->dev, "ERROR Set output tap delay : %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Output tap delay */
> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG,
> +				 OTAPDLYSEL_MASK, OTAPDLYSEL_SHIFT(4));
> +	if (ret) {
> +		dev_err(&phy->dev, "ERROR: output tap dly select: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Power up eMMC phy analog blocks */
> +	return intel_emmc_phy_power(phy, true);
> +}
> +
> +static int intel_emmc_phy_power_off(struct phy *phy)
> +{
> +	/* Power down eMMC phy analog blocks */
> +	return intel_emmc_phy_power(phy, false);
> +}
> +
> +static const struct phy_ops ops = {
> +	.init		= intel_emmc_phy_init,
> +	.exit		= intel_emmc_phy_exit,
> +	.power_on	= intel_emmc_phy_power_on,
> +	.power_off	= intel_emmc_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int intel_emmc_phy_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	struct intel_emmc_phy *priv;
> +	struct phy *generic_phy;
> +	struct phy_provider *phy_provider;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	/* Get eMMC phy (accessed via chiptop) regmap */
> +	priv->syscfg = syscon_regmap_lookup_by_phandle(np, "intel,syscon");
> +	if (IS_ERR(priv->syscfg)) {
> +		dev_err(dev, "failed to find syscon\n");
> +		return PTR_ERR(priv->syscfg);
> +	}
> +
> +	generic_phy = devm_phy_create(dev, np, &ops);
> +	if (IS_ERR(generic_phy)) {
> +		dev_err(dev, "failed to create PHY\n");
> +		return PTR_ERR(generic_phy);
> +	}
> +
> +	phy_set_drvdata(generic_phy, priv);
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id intel_emmc_phy_dt_ids[] = {
> +	{ .compatible = "intel,lgm-emmc-phy" },
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, intel_emmc_phy_dt_ids);
> +
> +static struct platform_driver intel_emmc_driver = {
> +	.probe		= intel_emmc_phy_probe,
> +	.driver		= {
> +		.name	= "intel-emmc-phy",
> +		.of_match_table = intel_emmc_phy_dt_ids,
> +	},
> +};
> +
> +module_platform_driver(intel_emmc_driver);
> +
> +MODULE_AUTHOR("Peter Harliman Liem <peter.harliman.liem@intel.com>");
> +MODULE_DESCRIPTION("Intel eMMC PHY driver");
> -- 
> 2.11.0
> 

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 1/2] dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY

[Ramuthevar, Vadivel MuruganX]

Hi Rob,

On 22/8/2019 8:49 PM, Rob Herring wrote:
> On Thu, Aug 22, 2019 at 5:28 AM Ramuthevar,Vadivel MuruganX
> <vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>
>> Add a YAML schema to use the host controller driver with the
>> eMMC PHY on Intel's Lightning Mountain SoC.
>>
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> ---
>> changes in v4:
>>    - As per Rob's review: validate 5.2 and 5.3
>>    - drop unrelated items.
>>
>> changes in v3:
>>    - resolve 'make dt_binding_check' warnings
>>
>> changes in v2:
>>    As per Rob Herring review comments, the following updates
>>   - change GPL-2.0 -> (GPL-2.0-only OR BSD-2-Clause)
>>   - filename is the compatible string plus .yaml
>>   - LGM: Lightning Mountain
>>   - update maintainer
>>   - add intel,syscon under property list
>>   - keep one example instead of two
>> ---
>>   .../bindings/phy/intel,lgm-emmc-phy.yaml           | 50 ++++++++++++++++++++++
>>   1 file changed, 50 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> Reviewed-by: Rob Herring <robh@kernel.org>

Thank you so much for the review and your time.

With Best Regards
Vadivel Murugan

Re: [PATCH v4 2/2] phy: intel-lgm-emmc: Add support for eMMC PHY

[Ramuthevar, Vadivel MuruganX]

Hi Andy,

On 22/8/2019 9:08 PM, Andy Shevchenko wrote:
> On Thu, Aug 22, 2019 at 06:28:43PM +0800, Ramuthevar,Vadivel MuruganX wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>
>> Add support for eMMC PHY on Intel's Lightning Mountain SoC.
>>
> Thanks for an update!
> One minor comment below. After addressing it
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Thank you so much for review comments and your time.
will update minor comment and also Reviewed-by tag as well.

---
With Best Regards
Vadivel Murugan
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> ---
>> chnages in v4:
>>   - As per Andy's review comments,the following update
>>   - add license_tag, macro, blank_line, error_check and grouping
>>
>> changes in v3:
>>   - As per Andy's review comments macro optimization,aligned
>>     function call in proper order and udelay added.
>>
>> changes in v2:
>>   - optimize IS_CALDONE() and IS_DLLRDY() macro
>>   - remove unneccessary comment
>>   - remove redundant assignment
>>   - add return the error ptr
>> ---
>>   drivers/phy/Kconfig                |   1 +
>>   drivers/phy/Makefile               |   1 +
>>   drivers/phy/intel/Kconfig          |   9 ++
>>   drivers/phy/intel/Makefile         |   2 +
>>   drivers/phy/intel/phy-intel-emmc.c | 281 +++++++++++++++++++++++++++++++++++++
>>   5 files changed, 294 insertions(+)
>>   create mode 100644 drivers/phy/intel/Kconfig
>>   create mode 100644 drivers/phy/intel/Makefile
>>   create mode 100644 drivers/phy/intel/phy-intel-emmc.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 0263db2ac874..b3ed94b98d9b 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -69,5 +69,6 @@ source "drivers/phy/socionext/Kconfig"
>>   source "drivers/phy/st/Kconfig"
>>   source "drivers/phy/tegra/Kconfig"
>>   source "drivers/phy/ti/Kconfig"
>> +source "drivers/phy/intel/Kconfig"
>>   
>>   endmenu
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index 0d9fddc498a6..3f1fc9efbbed 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -19,6 +19,7 @@ obj-y					+= broadcom/	\
>>   					   cadence/	\
>>   					   freescale/	\
>>   					   hisilicon/	\
>> +					   intel/	\
>>   					   marvell/	\
>>   					   motorola/	\
>>   					   mscc/	\
>> diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
>> new file mode 100644
>> index 000000000000..4ea6a8897cd7
>> --- /dev/null
>> +++ b/drivers/phy/intel/Kconfig
>> @@ -0,0 +1,9 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +#
>> +# Phy drivers for Intel Lightning Mountain(LGM) platform
>> +#
>> +config PHY_INTEL_EMMC
>> +	tristate "Intel EMMC PHY driver"
>> +	select GENERIC_PHY
>> +	help
>> +	  Enable this to support the Intel EMMC PHY
>> diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
>> new file mode 100644
>> index 000000000000..6b876a75599d
>> --- /dev/null
>> +++ b/drivers/phy/intel/Makefile
>> @@ -0,0 +1,2 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +obj-$(CONFIG_PHY_INTEL_EMMC)            += phy-intel-emmc.o
>> diff --git a/drivers/phy/intel/phy-intel-emmc.c b/drivers/phy/intel/phy-intel-emmc.c
>> new file mode 100644
>> index 000000000000..4f0226f37ab0
>> --- /dev/null
>> +++ b/drivers/phy/intel/phy-intel-emmc.c
>> @@ -0,0 +1,281 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Intel eMMC PHY driver
>> + * Copyright (C) 2019 Intel, Corp.
>> + */
>> +
>> +#include <linux/bits.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +/* eMMC phy register definitions */
>> +#define EMMC_PHYCTRL0_REG	0xa8
>> +#define DR_TY_MASK		GENMASK(30, 28)
>> +#define DR_TY_SHIFT(x)		(((x) << 28) & DR_TY_MASK)
>> +#define OTAPDLYENA		BIT(14)
>> +#define OTAPDLYSEL_MASK		GENMASK(13, 10)
>> +#define OTAPDLYSEL_SHIFT(x)	(((x) << 10) & OTAPDLYSEL_MASK)
>> +
>> +#define EMMC_PHYCTRL1_REG	0xac
>> +#define PDB_MASK		BIT(0)
>> +#define PDB_SHIFT(x)		(((x) << 0) & PDB_MASK)
>> +#define ENDLL_MASK		BIT(7)
>> +#define ENDLL_SHIFT(x)		(((x) << 7) & ENDLL_MASK)
>> +
>> +#define EMMC_PHYCTRL2_REG	0xb0
>> +#define FRQSEL_25M		0
>> +#define FRQSEL_50M		1
>> +#define FRQSEL_100M		2
>> +#define FRQSEL_150M		3
>> +#define FRQSEL_MASK		GENMASK(24, 22)
>> +#define FRQSEL_SHIFT(x)		(((x) << 22) & FRQSEL_MASK)
>> +
>> +#define EMMC_PHYSTAT_REG	0xbc
>> +#define CALDONE_MASK		BIT(9)
>> +#define DLLRDY_MASK		BIT(8)
>> +#define IS_CALDONE(x)	((x) & CALDONE_MASK)
>> +#define IS_DLLRDY(x)	((x) & DLLRDY_MASK)
>> +
>> +struct intel_emmc_phy {
>> +	struct regmap *syscfg;
>> +	struct clk *emmcclk;
>> +};
>> +
>> +static int intel_emmc_phy_power(struct phy *phy, bool on_off)
>> +{
>> +	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
>> +	unsigned int caldone;
>> +	unsigned int dllrdy;
>> +	unsigned int freqsel;
>> +	unsigned long rate;
>> +	int ret, quot;
>> +
>> +	/*
>> +	 * Keep phyctrl_pdb and phyctrl_endll low to allow
>> +	 * initialization of CALIO state M/C DFFs
>> +	 */
>> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK,
>> +				 PDB_SHIFT(0));
>> +	if (ret) {
>> +		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/* Already finish power_off above */
>> +	if (!on_off)
>> +		return 0;
>> +
>> +	rate = clk_get_rate(priv->emmcclk);
>> +	quot = DIV_ROUND_CLOSEST(rate, 50000000);
>> +	if (quot > FRQSEL_150M)
>> +		dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
>> +	freqsel = clamp_t(int, quot, FRQSEL_25M, FRQSEL_150M);
>> +
>> +	/*
>> +	 * According to the user manual, calpad calibration
>> +	 * cycle takes more than 2us without the minimal recommended
>> +	 * value, so we may need a little margin here
>> +	 */
>> +	udelay(5);
>> +
>> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK, 1);
> 1 is magic.
>
>> +	if (ret) {
>> +		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/*
>> +	 * According to the user manual, it asks driver to wait 5us for
>> +	 * calpad busy trimming. However it is documented that this value is
>> +	 * PVT(A.K.A process,voltage and temperature) relevant, so some
>> +	 * failure cases are found which indicates we should be more tolerant
>> +	 * to calpad busy trimming.
>> +	 */
>> +	ret = regmap_read_poll_timeout(priv->syscfg, EMMC_PHYSTAT_REG,
>> +				       caldone, IS_CALDONE(caldone),
>> +				       0, 50);
>> +	if (ret) {
>> +		dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/* Set the frequency of the DLL operation */
>> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL2_REG, FRQSEL_MASK,
>> +				 FRQSEL_SHIFT(freqsel));
>> +	if (ret) {
>> +		dev_err(&phy->dev, "set the frequency of dll failed:%d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/* Turn on the DLL */
>> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, ENDLL_MASK,
>> +				 ENDLL_SHIFT(1));
>> +	if (ret) {
>> +		dev_err(&phy->dev, "turn on the dll failed: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/*
>> +	 * After enabling analog DLL circuits docs say that we need 10.2 us if
>> +	 * our source clock is at 50 MHz and that lock time scales linearly
>> +	 * with clock speed.  If we are powering on the PHY and the card clock
>> +	 * is super slow (like 100 kHZ) this could take as long as 5.1 ms as
>> +	 * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
>> +	 * Hopefully we won't be running at 100 kHz, but we should still make
>> +	 * sure we wait long enough.
>> +	 *
>> +	 * NOTE: There appear to be corner cases where the DLL seems to take
>> +	 * extra long to lock for reasons that aren't understood.  In some
>> +	 * extreme cases we've seen it take up to over 10ms (!).  We'll be
>> +	 * generous and give it 50ms.
>> +	 */
>> +	ret = regmap_read_poll_timeout(priv->syscfg,
>> +				       EMMC_PHYSTAT_REG,
>> +				       dllrdy, IS_DLLRDY(dllrdy),
>> +				       0, 50 * USEC_PER_MSEC);
>> +	if (ret) {
>> +		dev_err(&phy->dev, "dllrdy failed. ret=%d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int intel_emmc_phy_init(struct phy *phy)
>> +{
>> +	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
>> +
>> +	/*
>> +	 * We purposely get the clock here and not in probe to avoid the
>> +	 * circular dependency problem. We expect:
>> +	 * - PHY driver to probe
>> +	 * - SDHCI driver to start probe
>> +	 * - SDHCI driver to register it's clock
>> +	 * - SDHCI driver to get the PHY
>> +	 * - SDHCI driver to init the PHY
>> +	 *
>> +	 * The clock is optional, so upon any error just return it like
>> +	 * any other error to user.
>> +	 *
>> +	 */
>> +	priv->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
>> +	if (IS_ERR(priv->emmcclk)) {
>> +		dev_err(&phy->dev, "ERROR: getting emmcclk\n");
>> +		return PTR_ERR(priv->emmcclk);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int intel_emmc_phy_exit(struct phy *phy)
>> +{
>> +	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
>> +
>> +	clk_put(priv->emmcclk);
>> +
>> +	return 0;
>> +}
>> +
>> +static int intel_emmc_phy_power_on(struct phy *phy)
>> +{
>> +	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
>> +	int ret;
>> +
>> +	/* Drive impedance: 50 Ohm */
>> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, DR_TY_MASK,
>> +				 DR_TY_SHIFT(6));
>> +	if (ret) {
>> +		dev_err(&phy->dev, "ERROR set drive-impednce-50ohm: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/* Output tap delay: disable */
>> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, OTAPDLYENA, 0);
>> +	if (ret) {
>> +		dev_err(&phy->dev, "ERROR Set output tap delay : %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/* Output tap delay */
>> +	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG,
>> +				 OTAPDLYSEL_MASK, OTAPDLYSEL_SHIFT(4));
>> +	if (ret) {
>> +		dev_err(&phy->dev, "ERROR: output tap dly select: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	/* Power up eMMC phy analog blocks */
>> +	return intel_emmc_phy_power(phy, true);
>> +}
>> +
>> +static int intel_emmc_phy_power_off(struct phy *phy)
>> +{
>> +	/* Power down eMMC phy analog blocks */
>> +	return intel_emmc_phy_power(phy, false);
>> +}
>> +
>> +static const struct phy_ops ops = {
>> +	.init		= intel_emmc_phy_init,
>> +	.exit		= intel_emmc_phy_exit,
>> +	.power_on	= intel_emmc_phy_power_on,
>> +	.power_off	= intel_emmc_phy_power_off,
>> +	.owner		= THIS_MODULE,
>> +};
>> +
>> +static int intel_emmc_phy_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct device_node *np = dev->of_node;
>> +	struct intel_emmc_phy *priv;
>> +	struct phy *generic_phy;
>> +	struct phy_provider *phy_provider;
>> +
>> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> +	if (!priv)
>> +		return -ENOMEM;
>> +
>> +	/* Get eMMC phy (accessed via chiptop) regmap */
>> +	priv->syscfg = syscon_regmap_lookup_by_phandle(np, "intel,syscon");
>> +	if (IS_ERR(priv->syscfg)) {
>> +		dev_err(dev, "failed to find syscon\n");
>> +		return PTR_ERR(priv->syscfg);
>> +	}
>> +
>> +	generic_phy = devm_phy_create(dev, np, &ops);
>> +	if (IS_ERR(generic_phy)) {
>> +		dev_err(dev, "failed to create PHY\n");
>> +		return PTR_ERR(generic_phy);
>> +	}
>> +
>> +	phy_set_drvdata(generic_phy, priv);
>> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +
>> +	return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static const struct of_device_id intel_emmc_phy_dt_ids[] = {
>> +	{ .compatible = "intel,lgm-emmc-phy" },
>> +	{}
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, intel_emmc_phy_dt_ids);
>> +
>> +static struct platform_driver intel_emmc_driver = {
>> +	.probe		= intel_emmc_phy_probe,
>> +	.driver		= {
>> +		.name	= "intel-emmc-phy",
>> +		.of_match_table = intel_emmc_phy_dt_ids,
>> +	},
>> +};
>> +
>> +module_platform_driver(intel_emmc_driver);
>> +
>> +MODULE_AUTHOR("Peter Harliman Liem <peter.harliman.liem@intel.com>");
>> +MODULE_DESCRIPTION("Intel eMMC PHY driver");
>> -- 
>> 2.11.0
>>