[RESEND PATCHv4 0/3] fpga: altera-cvp: Add Stratix10 Support

[RESEND PATCHv4 0/3] fpga: altera-cvp: Add Stratix10 Support

[thor.thayer]

From: Thor Thayer <thor.thayer@linux.intel.com>

Newer versions (V2) of Altera/Intel FPGAs CvP have different PCI
Vendor Specific Capability offsets than the older (V1) Altera/FPGAs.

Most of the CvP registers and their bitfields remain the same
between both the older parts and the newer parts.

This patchset implements changes to discover the Vendor Specific
Capability offset and then add Stratix10 CvP support.

V2 Changes:
  Remove inline designator from abstraction functions.
  Reverse Christmas Tree format for local variables
  Remove redundant mask from credit calculation
  Add commment for the delay(1) function in wait_for_credit()

V3 Changes
  Return int instead of void for abstraction functions
  Check the return code from read in altera_cvp_chk_error()
  Move reset of current_credit_byte to clear_state().
  Check return codes of read/writes in added functions.

V4 Changes
  Rename delta_credit to space
  Simplify wait for credit do-while loop.
  Change from udelay() to usleep_range()
  Use min() to find length to send
  Remove NULL initialization from private structure
  Use #define for Version1 offsets
  Change current_credit_byte to u32 sent_packets.
  Changes to Kconfig title and description to support Stratix10.

Thor Thayer (3):
  fpga: altera-cvp: Discover Vendor Specific offset
  fpga: altera-cvp: Preparation for V2 parts.
  fpga: altera-cvp: Add Stratix10 (V2) Support

 drivers/fpga/Kconfig      |   6 +-
 drivers/fpga/altera-cvp.c | 339 ++++++++++++++++++++++++++++++++++++----------
 2 files changed, 271 insertions(+), 74 deletions(-)

-- 
2.7.4

[RESEND PATCHv4 1/3] fpga: altera-cvp: Discover Vendor Specific offset

[thor.thayer]

From: Thor Thayer <thor.thayer@linux.intel.com>

Newer Intel FPGAs have different Vendor Specific offsets than
legacy parts. Use PCI discovery to find the CvP registers.
Since the register positions remain the same, change the hard
coded address to a more flexible way of indexing registers
from the offset.
Adding new PCI read and write abstraction functions to
handle the offset (altera_read_config_dword() and
altera_write_config_dword()).

Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
v2 Remove inline designator from abstraction functions.
   Reverse Christmas Tree format for local variables
v3 Fix return codes of abstraction functions.
v4 Remove dev_dbg() offset message
---
 drivers/fpga/altera-cvp.c | 95 +++++++++++++++++++++++++++++------------------
 1 file changed, 58 insertions(+), 37 deletions(-)

diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 53b963071c7b..9df2073331cb 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -22,10 +22,10 @@
 #define TIMEOUT_US	2000	/* CVP STATUS timeout for USERMODE polling */
 
 /* Vendor Specific Extended Capability Registers */
-#define VSE_PCIE_EXT_CAP_ID		0x200
+#define VSE_PCIE_EXT_CAP_ID		0x0
 #define VSE_PCIE_EXT_CAP_ID_VAL		0x000b	/* 16bit */
 
-#define VSE_CVP_STATUS			0x21c	/* 32bit */
+#define VSE_CVP_STATUS			0x1c	/* 32bit */
 #define VSE_CVP_STATUS_CFG_RDY		BIT(18)	/* CVP_CONFIG_READY */
 #define VSE_CVP_STATUS_CFG_ERR		BIT(19)	/* CVP_CONFIG_ERROR */
 #define VSE_CVP_STATUS_CVP_EN		BIT(20)	/* ctrl block is enabling CVP */
@@ -33,18 +33,18 @@
 #define VSE_CVP_STATUS_CFG_DONE		BIT(23)	/* CVP_CONFIG_DONE */
 #define VSE_CVP_STATUS_PLD_CLK_IN_USE	BIT(24)	/* PLD_CLK_IN_USE */
 
-#define VSE_CVP_MODE_CTRL		0x220	/* 32bit */
+#define VSE_CVP_MODE_CTRL		0x20	/* 32bit */
 #define VSE_CVP_MODE_CTRL_CVP_MODE	BIT(0)	/* CVP (1) or normal mode (0) */
 #define VSE_CVP_MODE_CTRL_HIP_CLK_SEL	BIT(1) /* PMA (1) or fabric clock (0) */
 #define VSE_CVP_MODE_CTRL_NUMCLKS_OFF	8	/* NUMCLKS bits offset */
 #define VSE_CVP_MODE_CTRL_NUMCLKS_MASK	GENMASK(15, 8)
 
-#define VSE_CVP_DATA			0x228	/* 32bit */
-#define VSE_CVP_PROG_CTRL		0x22c	/* 32bit */
+#define VSE_CVP_DATA			0x28	/* 32bit */
+#define VSE_CVP_PROG_CTRL		0x2c	/* 32bit */
 #define VSE_CVP_PROG_CTRL_CONFIG	BIT(0)
 #define VSE_CVP_PROG_CTRL_START_XFER	BIT(1)
 
-#define VSE_UNCOR_ERR_STATUS		0x234	/* 32bit */
+#define VSE_UNCOR_ERR_STATUS		0x34	/* 32bit */
 #define VSE_UNCOR_ERR_CVP_CFG_ERR	BIT(5)	/* CVP_CONFIG_ERROR_LATCHED */
 
 #define DRV_NAME		"altera-cvp"
@@ -61,14 +61,29 @@ struct altera_cvp_conf {
 					      u32 data);
 	char			mgr_name[64];
 	u8			numclks;
+	u32			vsec_offset;
 };
 
+static int altera_read_config_dword(struct altera_cvp_conf *conf,
+				    int where, u32 *val)
+{
+	return pci_read_config_dword(conf->pci_dev, conf->vsec_offset + where,
+				     val);
+}
+
+static int altera_write_config_dword(struct altera_cvp_conf *conf,
+				     int where, u32 val)
+{
+	return pci_write_config_dword(conf->pci_dev, conf->vsec_offset + where,
+				      val);
+}
+
 static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
 {
 	struct altera_cvp_conf *conf = mgr->priv;
 	u32 status;
 
-	pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &status);
+	altera_read_config_dword(conf, VSE_CVP_STATUS, &status);
 
 	if (status & VSE_CVP_STATUS_CFG_DONE)
 		return FPGA_MGR_STATE_OPERATING;
@@ -86,7 +101,8 @@ static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val)
 
 static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val)
 {
-	pci_write_config_dword(conf->pci_dev, VSE_CVP_DATA, val);
+	pci_write_config_dword(conf->pci_dev, conf->vsec_offset + VSE_CVP_DATA,
+			       val);
 }
 
 /* switches between CvP clock and internal clock */
@@ -96,10 +112,10 @@ static void altera_cvp_dummy_write(struct altera_cvp_conf *conf)
 	u32 val;
 
 	/* set 1 CVP clock cycle for every CVP Data Register Write */
-	pci_read_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, &val);
+	altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
 	val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
 	val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
-	pci_write_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
 
 	for (i = 0; i < CVP_DUMMY_WR; i++)
 		conf->write_data(conf, 0); /* dummy data, could be any value */
@@ -116,7 +132,7 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
 		retries++;
 
 	do {
-		pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
+		altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
 		if ((val & status_mask) == status_val)
 			return 0;
 
@@ -131,18 +147,17 @@ static int altera_cvp_teardown(struct fpga_manager *mgr,
 			       struct fpga_image_info *info)
 {
 	struct altera_cvp_conf *conf = mgr->priv;
-	struct pci_dev *pdev = conf->pci_dev;
 	int ret;
 	u32 val;
 
 	/* STEP 12 - reset START_XFER bit */
-	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
 	val &= ~VSE_CVP_PROG_CTRL_START_XFER;
-	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
 
 	/* STEP 13 - reset CVP_CONFIG bit */
 	val &= ~VSE_CVP_PROG_CTRL_CONFIG;
-	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
 
 	/*
 	 * STEP 14
@@ -164,7 +179,6 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 				 const char *buf, size_t count)
 {
 	struct altera_cvp_conf *conf = mgr->priv;
-	struct pci_dev *pdev = conf->pci_dev;
 	u32 iflags, val;
 	int ret;
 
@@ -184,7 +198,7 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 		conf->numclks = 1; /* for uncompressed and unencrypted images */
 
 	/* STEP 1 - read CVP status and check CVP_EN flag */
-	pci_read_config_dword(pdev, VSE_CVP_STATUS, &val);
+	altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
 	if (!(val & VSE_CVP_STATUS_CVP_EN)) {
 		dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val);
 		return -ENODEV;
@@ -202,14 +216,14 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 	 * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
 	 */
 	/* switch from fabric to PMA clock */
-	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
 	val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
-	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
 
 	/* set CVP mode */
-	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
 	val |= VSE_CVP_MODE_CTRL_CVP_MODE;
-	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
 
 	/*
 	 * STEP 3
@@ -218,10 +232,10 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 	altera_cvp_dummy_write(conf);
 
 	/* STEP 4 - set CVP_CONFIG bit */
-	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
 	/* request control block to begin transfer using CVP */
 	val |= VSE_CVP_PROG_CTRL_CONFIG;
-	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
 
 	/* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */
 	ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
@@ -238,15 +252,15 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 	altera_cvp_dummy_write(conf);
 
 	/* STEP 7 - set START_XFER */
-	pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+	altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
 	val |= VSE_CVP_PROG_CTRL_START_XFER;
-	pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
 
 	/* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
-	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
 	val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
 	val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
-	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
 
 	return 0;
 }
@@ -257,7 +271,7 @@ static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
 	u32 val;
 
 	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
-	pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
+	altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
 	if (val & VSE_CVP_STATUS_CFG_ERR) {
 		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
 			bytes);
@@ -316,27 +330,25 @@ static int altera_cvp_write_complete(struct fpga_manager *mgr,
 				     struct fpga_image_info *info)
 {
 	struct altera_cvp_conf *conf = mgr->priv;
-	struct pci_dev *pdev = conf->pci_dev;
+	u32 mask, val;
 	int ret;
-	u32 mask;
-	u32 val;
 
 	ret = altera_cvp_teardown(mgr, info);
 	if (ret)
 		return ret;
 
 	/* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */
-	pci_read_config_dword(pdev, VSE_UNCOR_ERR_STATUS, &val);
+	altera_read_config_dword(conf, VSE_UNCOR_ERR_STATUS, &val);
 	if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) {
 		dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
 		return -EPROTO;
 	}
 
 	/* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */
-	pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+	altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
 	val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
 	val &= ~VSE_CVP_MODE_CTRL_CVP_MODE;
-	pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+	altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
 
 	/* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
 	mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
@@ -395,22 +407,29 @@ static int altera_cvp_probe(struct pci_dev *pdev,
 {
 	struct altera_cvp_conf *conf;
 	struct fpga_manager *mgr;
+	int ret, offset;
 	u16 cmd, val;
 	u32 regval;
-	int ret;
+
+	/* Discover the Vendor Specific Offset for this device */
+	offset = pci_find_next_ext_capability(pdev, 0, PCI_EXT_CAP_ID_VNDR);
+	if (!offset) {
+		dev_err(&pdev->dev, "No Vendor Specific Offset.\n");
+		return -ENODEV;
+	}
 
 	/*
 	 * First check if this is the expected FPGA device. PCI config
 	 * space access works without enabling the PCI device, memory
 	 * space access is enabled further down.
 	 */
-	pci_read_config_word(pdev, VSE_PCIE_EXT_CAP_ID, &val);
+	pci_read_config_word(pdev, offset + VSE_PCIE_EXT_CAP_ID, &val);
 	if (val != VSE_PCIE_EXT_CAP_ID_VAL) {
 		dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val);
 		return -ENODEV;
 	}
 
-	pci_read_config_dword(pdev, VSE_CVP_STATUS, &regval);
+	pci_read_config_dword(pdev, offset + VSE_CVP_STATUS, &regval);
 	if (!(regval & VSE_CVP_STATUS_CVP_EN)) {
 		dev_err(&pdev->dev,
 			"CVP is disabled for this device: CVP_STATUS Reg 0x%x\n",
@@ -422,6 +441,8 @@ static int altera_cvp_probe(struct pci_dev *pdev,
 	if (!conf)
 		return -ENOMEM;
 
+	conf->vsec_offset = offset;
+
 	/*
 	 * Enable memory BAR access. We cannot use pci_enable_device() here
 	 * because it will make the driver unusable with FPGA devices that
-- 
2.7.4

[RESEND PATCHv4 2/3] fpga: altera-cvp: Preparation for V2 parts.

[thor.thayer]

From: Thor Thayer <thor.thayer@linux.intel.com>

In preparation for adding newer V2 parts that use a FIFO,
reorganize altera_cvp_chk_error() and change the write
function to block based.
V2 parts have a block size matching the FIFO while older
V1 parts write a 32 bit word at a time.

Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
v2 Remove inline function declaration
   Reverse Christmas Tree format for local variables
v3 Add return code check in altera_cvp_chk_error()
v4 Use min() function to determine block length
---
 drivers/fpga/altera-cvp.c | 69 +++++++++++++++++++++++++++++------------------
 1 file changed, 43 insertions(+), 26 deletions(-)

diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 9df2073331cb..3b8386fd32e7 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -143,6 +143,42 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
 	return -ETIMEDOUT;
 }
 
+static int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	u32 val;
+	int ret;
+
+	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
+	ret = altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
+	if (ret || (val & VSE_CVP_STATUS_CFG_ERR)) {
+		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
+			bytes);
+		return -EPROTO;
+	}
+	return 0;
+}
+
+static int altera_cvp_send_block(struct altera_cvp_conf *conf,
+				 const u32 *data, size_t len)
+{
+	u32 mask, words = len / sizeof(u32);
+	int i, remainder;
+
+	for (i = 0; i < words; i++)
+		conf->write_data(conf, *data++);
+
+	/* write up to 3 trailing bytes, if any */
+	remainder = len % sizeof(u32);
+	if (remainder) {
+		mask = BIT(remainder * 8) - 1;
+		if (mask)
+			conf->write_data(conf, *data & mask);
+	}
+
+	return 0;
+}
+
 static int altera_cvp_teardown(struct fpga_manager *mgr,
 			       struct fpga_image_info *info)
 {
@@ -265,39 +301,25 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 	return 0;
 }
 
-static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
-{
-	struct altera_cvp_conf *conf = mgr->priv;
-	u32 val;
-
-	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
-	altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
-	if (val & VSE_CVP_STATUS_CFG_ERR) {
-		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
-			bytes);
-		return -EPROTO;
-	}
-	return 0;
-}
-
 static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
 			    size_t count)
 {
 	struct altera_cvp_conf *conf = mgr->priv;
+	size_t done, remaining, len;
 	const u32 *data;
-	size_t done, remaining;
 	int status = 0;
-	u32 mask;
 
 	/* STEP 9 - write 32-bit data from RBF file to CVP data register */
 	data = (u32 *)buf;
 	remaining = count;
 	done = 0;
 
-	while (remaining >= 4) {
-		conf->write_data(conf, *data++);
-		done += 4;
-		remaining -= 4;
+	while (remaining) {
+		len = min(sizeof(u32), remaining);
+		altera_cvp_send_block(conf, data, len);
+		data++;
+		done += len;
+		remaining -= len;
 
 		/*
 		 * STEP 10 (optional) and STEP 11
@@ -315,11 +337,6 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
 		}
 	}
 
-	/* write up to 3 trailing bytes, if any */
-	mask = BIT(remaining * 8) - 1;
-	if (mask)
-		conf->write_data(conf, *data & mask);
-
 	if (altera_cvp_chkcfg)
 		status = altera_cvp_chk_error(mgr, count);
 
-- 
2.7.4

[RESEND PATCHv4 3/3] fpga: altera-cvp: Add Stratix10 (V2) Support

[thor.thayer]

From: Thor Thayer <thor.thayer@linux.intel.com>

Add Stratix10 specific functions that use a credit mechanism
to throttle data to the CvP FIFOs. Add a private structure
with function pointers for V1 vs V2 functions.

Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
v2 Remove inline function declaration
   Reverse Christmas Tree format for local variables
   Remove mask from credit calculation
   Add commment for the delay(1) function in wait_for_credit()
v3 Fix return code of abstraction function
   Move reset of current_credit_byte to clear_state().
   Check return code of credit register read in wait_for_credit()
   Check return code of clear_state read/write register.
v4 Implement changes suggested by maintainer.
      Rename delta_credit to space
      Simplify credit do-while loop.
      Change from udelay() to usleep_range()
      Remove NULL initialization from private structure
      Use name for Version1 offsets
   Change current_credit_byte to u32 sent_packets.
   Changes to Kconfig title and description to support Stratix10.
---
 drivers/fpga/Kconfig      |   6 +-
 drivers/fpga/altera-cvp.c | 187 ++++++++++++++++++++++++++++++++++++++++++----
 2 files changed, 176 insertions(+), 17 deletions(-)

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 474f304ec109..f50956ec1300 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -45,11 +45,11 @@ config FPGA_MGR_ALTERA_PS_SPI
 	  using the passive serial interface over SPI.
 
 config FPGA_MGR_ALTERA_CVP
-	tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager"
+	tristate "Altera CvP FPGA Manager"
 	depends on PCI
 	help
-	  FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V
-	  and Arria 10 Altera FPGAs using the CvP interface over PCIe.
+	  FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V,
+	  Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe.
 
 config FPGA_MGR_ZYNQ_FPGA
 	tristate "Xilinx Zynq FPGA"
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 3b8386fd32e7..4e0edb60bfba 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -43,16 +43,34 @@
 #define VSE_CVP_PROG_CTRL		0x2c	/* 32bit */
 #define VSE_CVP_PROG_CTRL_CONFIG	BIT(0)
 #define VSE_CVP_PROG_CTRL_START_XFER	BIT(1)
+#define VSE_CVP_PROG_CTRL_MASK		GENMASK(1, 0)
 
 #define VSE_UNCOR_ERR_STATUS		0x34	/* 32bit */
 #define VSE_UNCOR_ERR_CVP_CFG_ERR	BIT(5)	/* CVP_CONFIG_ERROR_LATCHED */
 
+#define V1_VSEC_OFFSET			0x200	/* Vendor Specific Offset V1 */
+/* V2 Defines */
+#define VSE_CVP_TX_CREDITS		0x49	/* 8bit */
+
+#define V2_CREDIT_TIMEOUT_US		20000
+#define V2_CHECK_CREDIT_US		10
+#define V2_POLL_TIMEOUT_US		1000000
+#define V2_USER_TIMEOUT_US		500000
+
+#define V1_POLL_TIMEOUT_US		10
+
 #define DRV_NAME		"altera-cvp"
 #define ALTERA_CVP_MGR_NAME	"Altera CvP FPGA Manager"
 
+/* Write block sizes */
+#define ALTERA_CVP_V1_SIZE	4
+#define ALTERA_CVP_V2_SIZE	4096
+
 /* Optional CvP config error status check for debugging */
 static bool altera_cvp_chkcfg;
 
+struct cvp_priv;
+
 struct altera_cvp_conf {
 	struct fpga_manager	*mgr;
 	struct pci_dev		*pci_dev;
@@ -61,9 +79,27 @@ struct altera_cvp_conf {
 					      u32 data);
 	char			mgr_name[64];
 	u8			numclks;
+	u32			sent_packets;
 	u32			vsec_offset;
+	const struct cvp_priv	*priv;
 };
 
+struct cvp_priv {
+	void	(*switch_clk)(struct altera_cvp_conf *conf);
+	int	(*clear_state)(struct altera_cvp_conf *conf);
+	int	(*wait_credit)(struct fpga_manager *mgr, u32 blocks);
+	size_t	block_size;
+	int	poll_time_us;
+	int	user_time_us;
+};
+
+static int altera_read_config_byte(struct altera_cvp_conf *conf,
+				   int where, u8 *val)
+{
+	return pci_read_config_byte(conf->pci_dev, conf->vsec_offset + where,
+				    val);
+}
+
 static int altera_read_config_dword(struct altera_cvp_conf *conf,
 				    int where, u32 *val)
 {
@@ -159,6 +195,73 @@ static int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
 	return 0;
 }
 
+/*
+ * CvP Version2 Functions
+ * Recent Intel FPGAs use a credit mechanism to throttle incoming
+ * bitstreams and a different method of clearing the state.
+ */
+
+static int altera_cvp_v2_clear_state(struct altera_cvp_conf *conf)
+{
+	u32 val;
+	int ret;
+
+	/* Clear the START_XFER and CVP_CONFIG bits */
+	ret = altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
+	if (ret) {
+		dev_err(&conf->pci_dev->dev,
+			"Error reading CVP Program Control Register\n");
+		return ret;
+	}
+
+	val &= ~VSE_CVP_PROG_CTRL_MASK;
+	ret = altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
+	if (ret) {
+		dev_err(&conf->pci_dev->dev,
+			"Error writing CVP Program Control Register\n");
+		return ret;
+	}
+
+	return altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
+				      conf->priv->poll_time_us);
+}
+
+static int altera_cvp_v2_wait_for_credit(struct fpga_manager *mgr,
+					 u32 blocks)
+{
+	u32 timeout = V2_CREDIT_TIMEOUT_US / V2_CHECK_CREDIT_US;
+	struct altera_cvp_conf *conf = mgr->priv;
+	int ret;
+	u8 val;
+
+	do {
+		ret = altera_read_config_byte(conf, VSE_CVP_TX_CREDITS, &val);
+		if (ret) {
+			dev_err(&conf->pci_dev->dev,
+				"Error reading CVP Credit Register\n");
+			return ret;
+		}
+
+		/* Return if there is space in FIFO */
+		if (val - (u8)conf->sent_packets)
+			return 0;
+
+		ret = altera_cvp_chk_error(mgr, blocks * ALTERA_CVP_V2_SIZE);
+		if (ret) {
+			dev_err(&conf->pci_dev->dev,
+				"CE Bit error credit reg[0x%x]:sent[0x%x]\n",
+				val, conf->sent_packets);
+			return -EAGAIN;
+		}
+
+		/* Limit the check credit byte traffic */
+		usleep_range(V2_CHECK_CREDIT_US, V2_CHECK_CREDIT_US + 1);
+	} while (timeout--);
+
+	dev_err(&conf->pci_dev->dev, "Timeout waiting for credit\n");
+	return -ETIMEDOUT;
+}
+
 static int altera_cvp_send_block(struct altera_cvp_conf *conf,
 				 const u32 *data, size_t len)
 {
@@ -200,10 +303,12 @@ static int altera_cvp_teardown(struct fpga_manager *mgr,
 	 * - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy
 	 *   writes to the HIP
 	 */
-	altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */
+	if (conf->priv->switch_clk)
+		conf->priv->switch_clk(conf);
 
 	/* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
-	ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, 10);
+	ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
+				     conf->priv->poll_time_us);
 	if (ret)
 		dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
 
@@ -265,7 +370,18 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 	 * STEP 3
 	 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
 	 */
-	altera_cvp_dummy_write(conf);
+	if (conf->priv->switch_clk)
+		conf->priv->switch_clk(conf);
+
+	if (conf->priv->clear_state) {
+		ret = conf->priv->clear_state(conf);
+		if (ret) {
+			dev_err(&mgr->dev, "Problem clearing out state\n");
+			return ret;
+		}
+	}
+
+	conf->sent_packets = 0;
 
 	/* STEP 4 - set CVP_CONFIG bit */
 	altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
@@ -273,9 +389,10 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 	val |= VSE_CVP_PROG_CTRL_CONFIG;
 	altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
 
-	/* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */
+	/* STEP 5 - poll CVP_CONFIG READY for 1 with timeout */
 	ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
-				     VSE_CVP_STATUS_CFG_RDY, 10);
+				     VSE_CVP_STATUS_CFG_RDY,
+				     conf->priv->poll_time_us);
 	if (ret) {
 		dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
 		return ret;
@@ -285,7 +402,16 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 	 * STEP 6
 	 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
 	 */
-	altera_cvp_dummy_write(conf);
+	if (conf->priv->switch_clk)
+		conf->priv->switch_clk(conf);
+
+	if (altera_cvp_chkcfg) {
+		ret = altera_cvp_chk_error(mgr, 0);
+		if (ret) {
+			dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
+			return ret;
+		}
+	}
 
 	/* STEP 7 - set START_XFER */
 	altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
@@ -293,11 +419,12 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
 	altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
 
 	/* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
-	altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
-	val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
-	val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
-	altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
-
+	if (conf->priv->switch_clk) {
+		altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
+		val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
+		val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
+		altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
+	}
 	return 0;
 }
 
@@ -315,11 +442,22 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
 	done = 0;
 
 	while (remaining) {
-		len = min(sizeof(u32), remaining);
+		/* Use credit throttling if available */
+		if (conf->priv->wait_credit) {
+			status = conf->priv->wait_credit(mgr, done);
+			if (status) {
+				dev_err(&conf->pci_dev->dev,
+					"Wait Credit ERR: 0x%x\n", status);
+				return status;
+			}
+		}
+
+		len = min(conf->priv->block_size, remaining);
 		altera_cvp_send_block(conf, data, len);
-		data++;
+		data += len / sizeof(u32);
 		done += len;
 		remaining -= len;
+		conf->sent_packets++;
 
 		/*
 		 * STEP 10 (optional) and STEP 11
@@ -369,7 +507,8 @@ static int altera_cvp_write_complete(struct fpga_manager *mgr,
 
 	/* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
 	mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
-	ret = altera_cvp_wait_status(conf, mask, mask, TIMEOUT_US);
+	ret = altera_cvp_wait_status(conf, mask, mask,
+				     conf->priv->user_time_us);
 	if (ret)
 		dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
 
@@ -383,6 +522,21 @@ static const struct fpga_manager_ops altera_cvp_ops = {
 	.write_complete	= altera_cvp_write_complete,
 };
 
+static const struct cvp_priv cvp_priv_v1 = {
+	.switch_clk	= altera_cvp_dummy_write,
+	.block_size	= ALTERA_CVP_V1_SIZE,
+	.poll_time_us	= V1_POLL_TIMEOUT_US,
+	.user_time_us	= TIMEOUT_US,
+};
+
+static const struct cvp_priv cvp_priv_v2 = {
+	.clear_state	= altera_cvp_v2_clear_state,
+	.wait_credit	= altera_cvp_v2_wait_for_credit,
+	.block_size	= ALTERA_CVP_V2_SIZE,
+	.poll_time_us	= V2_POLL_TIMEOUT_US,
+	.user_time_us	= V2_USER_TIMEOUT_US,
+};
+
 static ssize_t chkcfg_show(struct device_driver *dev, char *buf)
 {
 	return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg);
@@ -484,6 +638,11 @@ static int altera_cvp_probe(struct pci_dev *pdev,
 	conf->pci_dev = pdev;
 	conf->write_data = altera_cvp_write_data_iomem;
 
+	if (conf->vsec_offset == V1_VSEC_OFFSET)
+		conf->priv = &cvp_priv_v1;
+	else
+		conf->priv = &cvp_priv_v2;
+
 	conf->map = pci_iomap(pdev, CVP_BAR, 0);
 	if (!conf->map) {
 		dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
-- 
2.7.4

Re: [RESEND PATCHv4 0/3] fpga: altera-cvp: Add Stratix10 Support

[Moritz Fischer]

Hi Thor,

On Mon, Aug 19, 2019 at 03:48:05PM -0500, thor.thayer@linux.intel.com wrote:
> From: Thor Thayer <thor.thayer@linux.intel.com>
> 
> Newer versions (V2) of Altera/Intel FPGAs CvP have different PCI
> Vendor Specific Capability offsets than the older (V1) Altera/FPGAs.
> 
> Most of the CvP registers and their bitfields remain the same
> between both the older parts and the newer parts.
> 
> This patchset implements changes to discover the Vendor Specific
> Capability offset and then add Stratix10 CvP support.
> 
> V2 Changes:
>   Remove inline designator from abstraction functions.
>   Reverse Christmas Tree format for local variables
>   Remove redundant mask from credit calculation
>   Add commment for the delay(1) function in wait_for_credit()
> 
> V3 Changes
>   Return int instead of void for abstraction functions
>   Check the return code from read in altera_cvp_chk_error()
>   Move reset of current_credit_byte to clear_state().
>   Check return codes of read/writes in added functions.
> 
> V4 Changes
>   Rename delta_credit to space
>   Simplify wait for credit do-while loop.
>   Change from udelay() to usleep_range()
>   Use min() to find length to send
>   Remove NULL initialization from private structure
>   Use #define for Version1 offsets
>   Change current_credit_byte to u32 sent_packets.
>   Changes to Kconfig title and description to support Stratix10.
> 
> Thor Thayer (3):
>   fpga: altera-cvp: Discover Vendor Specific offset
>   fpga: altera-cvp: Preparation for V2 parts.
>   fpga: altera-cvp: Add Stratix10 (V2) Support
> 
>  drivers/fpga/Kconfig      |   6 +-
>  drivers/fpga/altera-cvp.c | 339 ++++++++++++++++++++++++++++++++++++----------
>  2 files changed, 271 insertions(+), 74 deletions(-)
> 
> -- 
> 2.7.4
> 

Applied to for-next. If all goes well I'll send it out with next PR.

- Moritz