* [PATCH v3 1/6] ARM: dts: mmp2: trivial whitespace fix
2019-08-28 7:26 [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Lubomir Rintel
@ 2019-08-28 7:26 ` Lubomir Rintel
2019-08-28 7:26 ` [PATCH v3 2/6] ARM: dts: mmp2: fix the SPI nodes Lubomir Rintel
` (5 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-08-28 7:26 UTC (permalink / raw)
To: Olof Johansson
Cc: Rob Herring, Mark Rutland, linux-arm-kernel, devicetree,
linux-kernel, Pavel Machek, Lubomir Rintel
A missing space before a curly brace.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
arch/arm/boot/dts/mmp2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index b6f40743e07b0..50b6c38b39cc3 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -379,7 +379,7 @@
};
};
- soc_clocks: clocks{
+ soc_clocks: clocks {
compatible = "marvell,mmp2-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,
--
2.21.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v3 2/6] ARM: dts: mmp2: fix the SPI nodes
2019-08-28 7:26 [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Lubomir Rintel
2019-08-28 7:26 ` [PATCH v3 1/6] ARM: dts: mmp2: trivial whitespace fix Lubomir Rintel
@ 2019-08-28 7:26 ` Lubomir Rintel
2019-08-28 7:26 ` [PATCH v3 3/6] ARM: dts: mmp2: rename the USB PHY node Lubomir Rintel
` (4 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-08-28 7:26 UTC (permalink / raw)
To: Olof Johansson
Cc: Rob Herring, Mark Rutland, linux-arm-kernel, devicetree,
linux-kernel, Pavel Machek, Lubomir Rintel
The SPI bus has a single address cell and not size cells.
Also, dtc thinks the SPI nodes are preferrably called "spi" and it is
right to think so.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
arch/arm/boot/dts/mmp2.dtsi | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 50b6c38b39cc3..e64639ce57a91 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -346,35 +346,43 @@
status = "disabled";
};
- ssp1: ssp@d4035000 {
+ ssp1: spi@d4035000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4035000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP0>;
interrupts = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- ssp2: ssp@d4036000 {
+ ssp2: spi@d4036000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4036000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP1>;
interrupts = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- ssp3: ssp@d4037000 {
+ ssp3: spi@d4037000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4037000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP2>;
interrupts = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
- ssp4: ssp@d4039000 {
+ ssp4: spi@d4039000 {
compatible = "marvell,mmp2-ssp";
reg = <0xd4039000 0x1000>;
clocks = <&soc_clocks MMP2_CLK_SSP3>;
interrupts = <21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
--
2.21.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v3 3/6] ARM: dts: mmp2: rename the USB PHY node
2019-08-28 7:26 [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Lubomir Rintel
2019-08-28 7:26 ` [PATCH v3 1/6] ARM: dts: mmp2: trivial whitespace fix Lubomir Rintel
2019-08-28 7:26 ` [PATCH v3 2/6] ARM: dts: mmp2: fix the SPI nodes Lubomir Rintel
@ 2019-08-28 7:26 ` Lubomir Rintel
2019-08-28 7:26 ` [PATCH v3 4/6] ARM: dts: mmp2: add camera interfaces Lubomir Rintel
` (3 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-08-28 7:26 UTC (permalink / raw)
To: Olof Johansson
Cc: Rob Herring, Mark Rutland, linux-arm-kernel, devicetree,
linux-kernel, Pavel Machek, Lubomir Rintel
This device is not an OTG phy, it's a regular USB HS phy. Follow the
generic node name recommendation, and rename it to "usb-phy".
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
arch/arm/boot/dts/mmp2.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index e64639ce57a91..21432cb9143f7 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -117,7 +117,7 @@
mrvl,intc-nr-irqs = <2>;
};
- usb_otg_phy0: usb-otg-phy@d4207000 {
+ usb_phy0: usb-phy@d4207000 {
compatible = "marvell,mmp2-usb-phy";
reg = <0xd4207000 0x40>;
#phy-cells = <0>;
@@ -130,7 +130,7 @@
interrupts = <44>;
clocks = <&soc_clocks MMP2_CLK_USB>;
clock-names = "USBCLK";
- phys = <&usb_otg_phy0>;
+ phys = <&usb_phy0>;
phy-names = "usb";
status = "disabled";
};
--
2.21.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v3 4/6] ARM: dts: mmp2: add camera interfaces
2019-08-28 7:26 [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Lubomir Rintel
` (2 preceding siblings ...)
2019-08-28 7:26 ` [PATCH v3 3/6] ARM: dts: mmp2: rename the USB PHY node Lubomir Rintel
@ 2019-08-28 7:26 ` Lubomir Rintel
2019-08-28 7:26 ` [PATCH v3 5/6] ARM: dts: mmp2: specify reg-shift for the UARTs Lubomir Rintel
` (2 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-08-28 7:26 UTC (permalink / raw)
To: Olof Johansson
Cc: Rob Herring, Mark Rutland, linux-arm-kernel, devicetree,
linux-kernel, Pavel Machek, Lubomir Rintel
Supported by the mmp-camera driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
arch/arm/boot/dts/mmp2.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 21432cb9143f7..68b5470773232 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -170,6 +170,28 @@
interrupts = <54>;
status = "disabled";
};
+
+ camera0: camera@d420a000 {
+ compatible = "marvell,mmp2-ccic";
+ reg = <0xd420a000 0x800>;
+ interrupts = <42>;
+ clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+ clock-names = "axi";
+ #clock-cells = <0>;
+ clock-output-names = "mclk";
+ status = "disabled";
+ };
+
+ camera1: camera@d420a800 {
+ compatible = "marvell,mmp2-ccic";
+ reg = <0xd420a800 0x800>;
+ interrupts = <30>;
+ clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+ clock-names = "axi";
+ #clock-cells = <0>;
+ clock-output-names = "mclk";
+ status = "disabled";
+ };
};
apb@d4000000 { /* APB */
--
2.21.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v3 5/6] ARM: dts: mmp2: specify reg-shift for the UARTs
2019-08-28 7:26 [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Lubomir Rintel
` (3 preceding siblings ...)
2019-08-28 7:26 ` [PATCH v3 4/6] ARM: dts: mmp2: add camera interfaces Lubomir Rintel
@ 2019-08-28 7:26 ` Lubomir Rintel
2019-08-28 7:26 ` [PATCH v3 6/6] ARM: dts: mmp2: add OLPC XO 1.75 machine Lubomir Rintel
2019-09-07 19:40 ` [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Pavel Machek
6 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-08-28 7:26 UTC (permalink / raw)
To: Olof Johansson
Cc: Rob Herring, Mark Rutland, linux-arm-kernel, devicetree,
linux-kernel, Pavel Machek, Lubomir Rintel
This makes the 8250_of driver happy. There are two more drivers in the
tree that bind to mrvl,mmp-uart compatibles: pxa and 8250_pxa and
neither of them requires the reg-shift property, assuming it's always 2.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
arch/arm/boot/dts/mmp2.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 68b5470773232..6a2f072c1d0a8 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -214,6 +214,7 @@
interrupts = <27>;
clocks = <&soc_clocks MMP2_CLK_UART0>;
resets = <&soc_clocks MMP2_CLK_UART0>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -223,6 +224,7 @@
interrupts = <28>;
clocks = <&soc_clocks MMP2_CLK_UART1>;
resets = <&soc_clocks MMP2_CLK_UART1>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -232,6 +234,7 @@
interrupts = <24>;
clocks = <&soc_clocks MMP2_CLK_UART2>;
resets = <&soc_clocks MMP2_CLK_UART2>;
+ reg-shift = <2>;
status = "disabled";
};
@@ -241,6 +244,7 @@
interrupts = <46>;
clocks = <&soc_clocks MMP2_CLK_UART3>;
resets = <&soc_clocks MMP2_CLK_UART3>;
+ reg-shift = <2>;
status = "disabled";
};
--
2.21.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v3 6/6] ARM: dts: mmp2: add OLPC XO 1.75 machine
2019-08-28 7:26 [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Lubomir Rintel
` (4 preceding siblings ...)
2019-08-28 7:26 ` [PATCH v3 5/6] ARM: dts: mmp2: specify reg-shift for the UARTs Lubomir Rintel
@ 2019-08-28 7:26 ` Lubomir Rintel
2019-09-07 19:40 ` [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Pavel Machek
6 siblings, 0 replies; 10+ messages in thread
From: Lubomir Rintel @ 2019-08-28 7:26 UTC (permalink / raw)
To: Olof Johansson
Cc: Rob Herring, Mark Rutland, linux-arm-kernel, devicetree,
linux-kernel, Pavel Machek, Lubomir Rintel
This is a fairly complete description of an OLPC XO 1.75 laptop.
What's missing for now is the GPU, LCD controller, DCON, the panel and
audio.
The machine is booted with OpenFirmware and thus has a devicetree.
However, older versions are unable to create a valid FDT and don't
follow the Linux bindings. Having an device tree in the kernel tree
makes it easier to use mainline kernels on such machines, test changes
with CONFIG_ARM_APPENDED_DTB and give a good reference on what bindings
are used on the machine without an access to one.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Changes since v1:
- Added this patch
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 244 ++++++++++++++++++++++++
2 files changed, 246 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9159fa2cea90c..65213b5265187 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -336,7 +336,8 @@ dtb-$(CONFIG_MACH_MESON8) += \
dtb-$(CONFIG_ARCH_MMP) += \
pxa168-aspenite.dtb \
pxa910-dkb.dtb \
- mmp2-brownstone.dtb
+ mmp2-brownstone.dtb \
+ mmp2-olpc-xo-1-75.dtb
dtb-$(CONFIG_ARCH_MPS2) += \
mps2-an385.dtb \
mps2-an399.dtb
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
new file mode 100644
index 0000000000000..6cfa0d4a18845
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * OLPC XO 1.75 Laptop.
+ *
+ * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "OLPC XO-1.75";
+ compatible = "olpc,xo-1.75", "mrvl,mmp2";
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@1fc00000 {
+ compatible = "simple-framebuffer";
+ reg = <0x1fc00000 (1200 * 900 * 2)>;
+ width = <1200>;
+ height = <900>;
+ stride = <(1200 * 2)>;
+ format = "r5g6b5";
+ clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>,
+ <&soc_clocks MMP2_CLK_DISP0>;
+ };
+ };
+
+ memory {
+ linux,usable-memory = <0x0 0x1f800000>;
+ available = <0xcf000 0x1ef31000 0x1000 0xbf000>;
+ reg = <0x0 0x20000000>;
+ device_type = "memory";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio 129 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ };
+
+ tablet_mode {
+ label = "E-Book Mode";
+ gpios = <&gpio 128 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_TABLET_MODE>;
+ wakeup-source;
+ };
+
+ microphone_insert {
+ label = "Microphone Plug";
+ gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MICROPHONE_INSERT>;
+ debounce-interval = <100>;
+ wakeup-source;
+ };
+
+ headphone_insert {
+ label = "Headphone Plug";
+ gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_HEADPHONE_INSERT>;
+ debounce-interval = <100>;
+ wakeup-source;
+ };
+ };
+
+ camera_i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>,
+ <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-gpio,timeout-ms = <1000>;
+ status = "okay";
+
+ camera@21 {
+ compatible = "ovti,ov7670";
+ reg = <0x21>;
+ reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>;
+ clocks = <&camera0>;
+ clock-names = "xclk";
+
+ port {
+ ov7670_0: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ remote-endpoint = <&camera0_0>;
+ };
+ };
+ };
+ };
+
+ battery {
+ compatible = "olpc,xo1.5-battery", "olpc,xo1-battery";
+ };
+
+ wlan_reg: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ wlan_pwrseq: pwrseq0 {
+ compatible = "mmc-pwrseq-sd8787";
+ powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ soc {
+ axi@d4200000 {
+ ap-sp@d4290000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "olpc,ap-sp";
+ interrupts = <40>;
+ reg = <0xd4290000 0x1000>;
+ data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+ clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+ };
+ };
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_otg0 {
+ status = "okay";
+};
+
+&mmc1 {
+ clock-frequency = <50000000>;
+ no-1-8-v;
+ mrvl,clk-delay-cycles = <31>;
+ broken-cd;
+ status = "okay";
+};
+
+&mmc2 {
+ clock-frequency = <50000000>;
+ no-1-8-v;
+ bus-width = <4>;
+ non-removable;
+ broken-cd;
+ wakeup-source;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&wlan_pwrseq>;
+ vmmc-supply = <&wlan_reg>;
+ status = "okay";
+};
+
+&mmc3 {
+ clock-frequency = <50000000>;
+ no-1-8-v;
+ bus-width = <8>;
+ non-removable;
+ broken-cd;
+ mrvl,clk-delay-cycles = <31>;
+ status = "okay";
+};
+
+&twsi1 {
+ status = "okay";
+
+ audio-codec@1a {
+ compatible = "realtek,alc5631";
+ reg = <0x1a>;
+ status = "okay";
+ };
+};
+
+&twsi2 {
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ status = "okay";
+ };
+};
+
+&twsi6 {
+ status = "okay";
+
+ accelerometer@1d {
+ compatible = "st,lis331dlh", "st,lis3lv02d";
+ reg = <0x1d>;
+ status = "okay";
+ };
+};
+
+&ssp3 {
+ #address-cells = <0>;
+ spi-slave;
+ status = "okay";
+ ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+ slave {
+ compatible = "olpc,xo1.75-ec";
+ spi-cpha;
+ cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&camera0 {
+ status = "okay";
+
+ port {
+ camera0_0: endpoint {
+ remote-endpoint = <&ov7670_0>;
+ };
+ };
+};
--
2.21.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates
2019-08-28 7:26 [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Lubomir Rintel
` (5 preceding siblings ...)
2019-08-28 7:26 ` [PATCH v3 6/6] ARM: dts: mmp2: add OLPC XO 1.75 machine Lubomir Rintel
@ 2019-09-07 19:40 ` Pavel Machek
2019-09-07 19:57 ` Arnd Bergmann
6 siblings, 1 reply; 10+ messages in thread
From: Pavel Machek @ 2019-09-07 19:40 UTC (permalink / raw)
To: Lubomir Rintel, arnd
Cc: Olof Johansson, Rob Herring, Mark Rutland, linux-arm-kernel,
devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 458 bytes --]
> Here's a couple of updates for the MMP2 SoC devicetree files.
> I'm wondering if they could be applied to the armsoc tree?
>
> Compared to previous submission, the only change is the addition of
> Acks from Pavel.
Any news here? Having up-to-date dts is kind-of useful....
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates
2019-09-07 19:40 ` [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates Pavel Machek
@ 2019-09-07 19:57 ` Arnd Bergmann
2019-09-07 20:47 ` Pavel Machek
0 siblings, 1 reply; 10+ messages in thread
From: Arnd Bergmann @ 2019-09-07 19:57 UTC (permalink / raw)
To: Pavel Machek
Cc: Lubomir Rintel, Olof Johansson, Rob Herring, Mark Rutland,
Linux ARM, DTML, linux-kernel
On Sat, Sep 7, 2019 at 9:40 PM Pavel Machek <pavel@ucw.cz> wrote:
>
>
> > Here's a couple of updates for the MMP2 SoC devicetree files.
> > I'm wondering if they could be applied to the armsoc tree?
> >
> > Compared to previous submission, the only change is the addition of
> > Acks from Pavel.
>
> Any news here? Having up-to-date dts is kind-of useful....
Thanks for adding me to Cc on your reply. I'm doing the merged for 5.4
and had not noticed this series earlier (I found the mmp3 series by
accident, but that one looked like it was not meant as a submission
for inclusion yet).
I've added the six patches to the arm/late branch in the soc tree
now, they will be in 5.4.
Lubomir, please send all future submissions to soc@kernel.org
(with Cc: to the interested parties) when you want them to be
included in the soc tree. That way they show up in patchwork
and won't get lost.
Arnd
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v3 0/6] ARM: dts: mmp2: devicetree updates
2019-09-07 19:57 ` Arnd Bergmann
@ 2019-09-07 20:47 ` Pavel Machek
0 siblings, 0 replies; 10+ messages in thread
From: Pavel Machek @ 2019-09-07 20:47 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Lubomir Rintel, Olof Johansson, Rob Herring, Mark Rutland,
Linux ARM, DTML, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 978 bytes --]
On Sat 2019-09-07 21:57:42, Arnd Bergmann wrote:
> On Sat, Sep 7, 2019 at 9:40 PM Pavel Machek <pavel@ucw.cz> wrote:
> >
> >
> > > Here's a couple of updates for the MMP2 SoC devicetree files.
> > > I'm wondering if they could be applied to the armsoc tree?
> > >
> > > Compared to previous submission, the only change is the addition of
> > > Acks from Pavel.
> >
> > Any news here? Having up-to-date dts is kind-of useful....
>
> Thanks for adding me to Cc on your reply. I'm doing the merged for 5.4
> and had not noticed this series earlier (I found the mmp3 series by
> accident, but that one looked like it was not meant as a submission
> for inclusion yet).
>
> I've added the six patches to the arm/late branch in the soc tree
> now, they will be in 5.4.
That was quick, thank you!
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread