[PATCH v5 1/3] dt-bindings: pci: layerscape-pci: add compatible strings "fsl,ls1028a-pcie"

[PATCH v5 1/3] dt-bindings: pci: layerscape-pci: add compatible strings "fsl,ls1028a-pcie"

[Xiaowei Bao]

Add the PCIe compatible string for LS1028A

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v2:
 - No change.
v3:
 - No change.
v4:
 - No change.
v5:
 - No change.

 Documentation/devicetree/bindings/pci/layerscape-pci.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index e20ceaa..99a386e 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -21,6 +21,7 @@ Required properties:
         "fsl,ls1046a-pcie"
         "fsl,ls1043a-pcie"
         "fsl,ls1012a-pcie"
+        "fsl,ls1028a-pcie"
   EP mode:
 	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
 - reg: base addresses and lengths of the PCIe controller register blocks.
-- 
2.9.5

[PATCH v5 2/3] arm64: dts: ls1028a: Add PCIe controller DT nodes

[Xiaowei Bao]

LS1028a implements 2 PCIe 3.0 controllers.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
v2:
 - Fix up the legacy INTx allocate failed issue.
v3:
 - No change.
v4:
 - Remove the num-lanes property.
v5:
 - Add the num-viewport property.

 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 52 ++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 72b9a75..c043b1d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -625,6 +625,58 @@
 			};
 		};
 
+		pcie@3400000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 			compatible = "pci-host-ecam-generic";
 			reg = <0x01 0xf0000000 0x0 0x100000>;
-- 
2.9.5

[PATCH v5 3/3] PCI: layerscape: Add LS1028a support

[Xiaowei Bao]

Add support for the LS1028a PCIe controller.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
v2:
 - No change.
v3:
 - Reuse the ls2088 driver data structurt.
v4:
 - No change.
v5:
 - No change.

 drivers/pci/controller/dwc/pci-layerscape.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 3a5fa26..f24f79a 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -263,6 +263,7 @@ static const struct ls_pcie_drvdata ls2088_drvdata = {
 static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls1012a-pcie", .data = &ls1046_drvdata },
 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
+	{ .compatible = "fsl,ls1028a-pcie", .data = &ls2088_drvdata },
 	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
 	{ .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
 	{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
-- 
2.9.5