* [PATCHv2-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-02 8:58 Anand Moon
2019-09-02 8:58 ` [PATCHv2-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Anand Moon
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Anand Moon @ 2019-09-02 8:58 UTC (permalink / raw)
To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
Kevin Hilman
Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Below small changes help re-configure or fix missing inter linking
of regulator node.
Rebased on linux-next-20190830
Changes based top on my prevoius series.
[0] https://patchwork.kernel.org/cover/11125987/
Changes for prevoius changes.
Fix some typo.
Updated few patches as per Martin's suggetion.
Best Regards
-Anand
Anand Moon (3):
arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
regulator
arm64: dts: meson: odroid-c2: Add missing regulator linked to
VDDIO_AO3V3 regulator
arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
supply
.../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 53 +++++++++++++++++--
1 file changed, 50 insertions(+), 3 deletions(-)
--
2.23.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCHv2-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator
2019-09-02 8:58 [PATCHv2-next 0/3] Odroid c2 missing regulator linking Anand Moon
@ 2019-09-02 8:58 ` Anand Moon
2019-09-03 19:03 ` Martin Blumenstingl
2019-09-02 8:58 ` [PATCHv2-next 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator Anand Moon
2019-09-02 8:58 ` [PATCHv2-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Anand Moon
2 siblings, 1 reply; 6+ messages in thread
From: Anand Moon @ 2019-09-02 8:58 UTC (permalink / raw)
To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
Kevin Hilman
Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
As per schematics VDDIO_AO18, VDDIO_AO3V3/VDD3V3 DDR3_1V5/DDR_VDDC:
fixed regulator output which is supplied by P5V0.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous.
- drop the rename and linking vcc3v3 regulator node.
- fix the typo spelling.
---
.../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 3e51f0835c8d..b763b76820ba 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -111,6 +111,36 @@
regulator-max-microvolt = <3300000>;
};
+ vddio_ao1v8: regulator-vddio-ao1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ /* U17 RT9179GB */
+ vin-supply = <&p5v0>;
+ };
+
+ vddio_ao3v3: regulator-vddio-ao3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ /* U11 MP2161GJ-C499 */
+ vin-supply = <&p5v0>;
+ };
+
+ vddc_ddr: regulator-vddc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "DDR3_1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ /* U15 MP2161GJ-C499 */
+ vin-supply = <&p5v0>;
+ };
+
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
--
2.23.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCHv2-next 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
2019-09-02 8:58 [PATCHv2-next 0/3] Odroid c2 missing regulator linking Anand Moon
2019-09-02 8:58 ` [PATCHv2-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Anand Moon
@ 2019-09-02 8:58 ` Anand Moon
2019-09-02 8:58 ` [PATCHv2-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Anand Moon
2 siblings, 0 replies; 6+ messages in thread
From: Anand Moon @ 2019-09-02 8:58 UTC (permalink / raw)
To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
Kevin Hilman
Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
As per schematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
is supplied by VDDIO_AO3V3.
While here, move the comment name with the signal name in the
schematics above the gpio property to make it consistent with other
regulators.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
changes from previous.
- Fix the typo.
- Add the comment as per Martin's suggestion.
- Added Martin's review tags
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index b763b76820ba..ef2c3b74415b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,17 +67,19 @@
};
tflash_vdd: regulator-tflash_vdd {
- /*
- * signal name from schematics: TFLASH_VDD_EN
- */
compatible = "regulator-fixed";
regulator-name = "TFLASH_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * signal name from schematics: TFLASH_VDD_EN
+ */
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /* U16 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
tf_io: gpio-regulator-tf_io {
@@ -95,6 +97,8 @@
states = <3300000 0>,
<1800000 1>;
+ /* U12/U13 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
vcc1v8: regulator-vcc1v8 {
@@ -102,6 +106,9 @@
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ /* U18 RT9179GB */
+ vin-supply = <&vddio_ao3v3>;
};
vcc3v3: regulator-vcc3v3 {
--
2.23.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCHv2-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply
2019-09-02 8:58 [PATCHv2-next 0/3] Odroid c2 missing regulator linking Anand Moon
2019-09-02 8:58 ` [PATCHv2-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Anand Moon
2019-09-02 8:58 ` [PATCHv2-next 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator Anand Moon
@ 2019-09-02 8:58 ` Anand Moon
2019-09-03 19:00 ` Martin Blumenstingl
2 siblings, 1 reply; 6+ messages in thread
From: Anand Moon @ 2019-09-02 8:58 UTC (permalink / raw)
To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
Kevin Hilman
Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
As per schematics HDMI_P5V0 is supplied by P5V0 so add missing link.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
As per Martin's suggestion added the HDMI_P5V0 fix regulator node.
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index ef2c3b74415b..a520ec0d73ff 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -66,6 +66,15 @@
regulator-always-on;
};
+ hdmi_p5v0: regulator-hdmi_p5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "HDMI_P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ /* AP2331SA-7 */
+ vin-supply = <&p5v0>;
+ };
+
tflash_vdd: regulator-tflash_vdd {
compatible = "regulator-fixed";
@@ -220,6 +229,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&hdmi_p5v0>;
};
&hdmi_tx_tmds_port {
--
2.23.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCHv2-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply
2019-09-02 8:58 ` [PATCHv2-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Anand Moon
@ 2019-09-03 19:00 ` Martin Blumenstingl
0 siblings, 0 replies; 6+ messages in thread
From: Martin Blumenstingl @ 2019-09-03 19:00 UTC (permalink / raw)
To: Anand Moon
Cc: Rob Herring, Jerome Brunet, Neil Armstrong, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
On Mon, Sep 2, 2019 at 10:58 AM Anand Moon <linux.amoon@gmail.com> wrote:
>
> As per schematics HDMI_P5V0 is supplied by P5V0 so add missing link.
>
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCHv2-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator
2019-09-02 8:58 ` [PATCHv2-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Anand Moon
@ 2019-09-03 19:03 ` Martin Blumenstingl
0 siblings, 0 replies; 6+ messages in thread
From: Martin Blumenstingl @ 2019-09-03 19:03 UTC (permalink / raw)
To: Anand Moon
Cc: Rob Herring, Jerome Brunet, Neil Armstrong, Kevin Hilman,
devicetree, linux-arm-kernel, linux-amlogic, linux-kernel
Hi Anand,
On Mon, Sep 2, 2019 at 10:58 AM Anand Moon <linux.amoon@gmail.com> wrote:
>
> As per schematics VDDIO_AO18, VDDIO_AO3V3/VDD3V3 DDR3_1V5/DDR_VDDC:
> fixed regulator output which is supplied by P5V0.
>
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
one comment below, but overall this looks good:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[...]
> + vddc_ddr: regulator-vddc-ddr {
> + compatible = "regulator-fixed";
> + regulator-name = "DDR3_1V5";
I prefer if the node name matches the regulator name, so in this case
I would write above:
ddr3_1v5: regulator-ddr-1v5 {
Martin
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-09-03 19:03 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-02 8:58 [PATCHv2-next 0/3] Odroid c2 missing regulator linking Anand Moon
2019-09-02 8:58 ` [PATCHv2-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Anand Moon
2019-09-03 19:03 ` Martin Blumenstingl
2019-09-02 8:58 ` [PATCHv2-next 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator Anand Moon
2019-09-02 8:58 ` [PATCHv2-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Anand Moon
2019-09-03 19:00 ` Martin Blumenstingl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).