* [PATCH v2] leds: lm3532: Fix optional led-max-microamp prop error handling
@ 2019-09-11 18:27 Dan Murphy
2019-09-12 18:32 ` Jacek Anaszewski
0 siblings, 1 reply; 4+ messages in thread
From: Dan Murphy @ 2019-09-11 18:27 UTC (permalink / raw)
To: jacek.anaszewski, pavel; +Cc: linux-leds, linux-kernel, Dan Murphy
Fix the error handling for the led-max-microamp property.
Need to check if the property is present and then if it is
retrieve the setting and its max boundary
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
v2 - Changed full scale current check to use min function
drivers/leds/leds-lm3532.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
index 62ace6698d25..a1742dc1f6fa 100644
--- a/drivers/leds/leds-lm3532.c
+++ b/drivers/leds/leds-lm3532.c
@@ -601,11 +601,15 @@ static int lm3532_parse_node(struct lm3532_data *priv)
goto child_out;
}
- ret = fwnode_property_read_u32(child, "led-max-microamp",
- &led->full_scale_current);
-
- if (led->full_scale_current > LM3532_FS_CURR_MAX)
- led->full_scale_current = LM3532_FS_CURR_MAX;
+ if (fwnode_property_present(child, "led-max-microamp")) {
+ if (fwnode_property_read_u32(child, "led-max-microamp",
+ &led->full_scale_current))
+ dev_err(&priv->client->dev,
+ "Failed getting led-max-microamp\n");
+ else
+ min(led->full_scale_current,
+ LM3532_FS_CURR_MAX);
+ }
if (led->mode == LM3532_BL_MODE_ALS) {
led->mode = LM3532_ALS_CTRL;
--
2.22.0.214.g8dca754b1e
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] leds: lm3532: Fix optional led-max-microamp prop error handling
2019-09-11 18:27 [PATCH v2] leds: lm3532: Fix optional led-max-microamp prop error handling Dan Murphy
@ 2019-09-12 18:32 ` Jacek Anaszewski
2019-09-12 19:12 ` Jacek Anaszewski
0 siblings, 1 reply; 4+ messages in thread
From: Jacek Anaszewski @ 2019-09-12 18:32 UTC (permalink / raw)
To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel
Hi Dan,
Thank you for the update.
On 9/11/19 8:27 PM, Dan Murphy wrote:
> Fix the error handling for the led-max-microamp property.
> Need to check if the property is present and then if it is
> retrieve the setting and its max boundary
>
> Reported-by: Pavel Machek <pavel@ucw.cz>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>
> v2 - Changed full scale current check to use min function
>
> drivers/leds/leds-lm3532.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
> index 62ace6698d25..a1742dc1f6fa 100644
> --- a/drivers/leds/leds-lm3532.c
> +++ b/drivers/leds/leds-lm3532.c
> @@ -601,11 +601,15 @@ static int lm3532_parse_node(struct lm3532_data *priv)
> goto child_out;
> }
>
> - ret = fwnode_property_read_u32(child, "led-max-microamp",
> - &led->full_scale_current);
> -
> - if (led->full_scale_current > LM3532_FS_CURR_MAX)
> - led->full_scale_current = LM3532_FS_CURR_MAX;
> + if (fwnode_property_present(child, "led-max-microamp")) {
> + if (fwnode_property_read_u32(child, "led-max-microamp",
> + &led->full_scale_current))
> + dev_err(&priv->client->dev,
> + "Failed getting led-max-microamp\n");
> + else
> + min(led->full_scale_current,
> + LM3532_FS_CURR_MAX);
> + }
>
> if (led->mode == LM3532_BL_MODE_ALS) {
> led->mode = LM3532_ALS_CTRL;
>
Applied.
--
Best regards,
Jacek Anaszewski
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] leds: lm3532: Fix optional led-max-microamp prop error handling
2019-09-12 18:32 ` Jacek Anaszewski
@ 2019-09-12 19:12 ` Jacek Anaszewski
2019-09-12 19:47 ` Dan Murphy
0 siblings, 1 reply; 4+ messages in thread
From: Jacek Anaszewski @ 2019-09-12 19:12 UTC (permalink / raw)
To: Dan Murphy, pavel; +Cc: linux-leds, linux-kernel
On 9/12/19 8:32 PM, Jacek Anaszewski wrote:> Hi Dan,
>
> Thank you for the update.
>
> On 9/11/19 8:27 PM, Dan Murphy wrote:
>> Fix the error handling for the led-max-microamp property.
>> Need to check if the property is present and then if it is
>> retrieve the setting and its max boundary
>>
>> Reported-by: Pavel Machek <pavel@ucw.cz>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>
>> v2 - Changed full scale current check to use min function
>>
>> drivers/leds/leds-lm3532.c | 14 +++++++++-----
>> 1 file changed, 9 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
>> index 62ace6698d25..a1742dc1f6fa 100644
>> --- a/drivers/leds/leds-lm3532.c
>> +++ b/drivers/leds/leds-lm3532.c
>> @@ -601,11 +601,15 @@ static int lm3532_parse_node(struct lm3532_data *priv)
>> goto child_out;
>> }
>>
>> - ret = fwnode_property_read_u32(child, "led-max-microamp",
>> - &led->full_scale_current);
>> -
>> - if (led->full_scale_current > LM3532_FS_CURR_MAX)
>> - led->full_scale_current = LM3532_FS_CURR_MAX;
>> + if (fwnode_property_present(child, "led-max-microamp")) {
>> + if (fwnode_property_read_u32(child, "led-max-microamp",
>> + &led->full_scale_current))
>> + dev_err(&priv->client->dev,
>> + "Failed getting led-max-microamp\n");
>> + else
>> + min(led->full_scale_current,
>> + LM3532_FS_CURR_MAX);
I didn't previously notice lack of assignment of min() return value.
I've amended that and while at it improved a bit this construction to
avoid some indentations and line breaks:
diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
index 62ace6698d25..0507c6575c08 100644
--- a/drivers/leds/leds-lm3532.c
+++ b/drivers/leds/leds-lm3532.c
@@ -601,11 +601,14 @@ static int lm3532_parse_node(struct lm3532_data *priv)
goto child_out;
}
- ret = fwnode_property_read_u32(child, "led-max-microamp",
- &led->full_scale_current);
-
- if (led->full_scale_current > LM3532_FS_CURR_MAX)
- led->full_scale_current = LM3532_FS_CURR_MAX;
+ if (fwnode_property_present(child, "led-max-microamp") &&
+ fwnode_property_read_u32(child, "led-max-microamp",
+ &led->full_scale_current))
+ dev_err(&priv->client->dev,
+ "Failed getting led-max-microamp\n");
+ else
+ led->full_scale_current = min(led->full_scale_current,
+ LM3532_FS_CURR_MAX);
if (led->mode == LM3532_BL_MODE_ALS) {
led->mode = LM3532_ALS_CTRL;
Please let me know in case of any doubts.
>> + }
>>
>> if (led->mode == LM3532_BL_MODE_ALS) {
>> led->mode = LM3532_ALS_CTRL;
>>
>
> Applied.
>
--
Best regards,
Jacek Anaszewski
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] leds: lm3532: Fix optional led-max-microamp prop error handling
2019-09-12 19:12 ` Jacek Anaszewski
@ 2019-09-12 19:47 ` Dan Murphy
0 siblings, 0 replies; 4+ messages in thread
From: Dan Murphy @ 2019-09-12 19:47 UTC (permalink / raw)
To: Jacek Anaszewski, pavel; +Cc: linux-leds, linux-kernel
Jacek
On 9/12/19 2:12 PM, Jacek Anaszewski wrote:
> On 9/12/19 8:32 PM, Jacek Anaszewski wrote:> Hi Dan,
>> Thank you for the update.
>>
>> On 9/11/19 8:27 PM, Dan Murphy wrote:
>>> Fix the error handling for the led-max-microamp property.
>>> Need to check if the property is present and then if it is
>>> retrieve the setting and its max boundary
>>>
>>> Reported-by: Pavel Machek <pavel@ucw.cz>
>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> ---
>>>
>>> v2 - Changed full scale current check to use min function
>>>
>>> drivers/leds/leds-lm3532.c | 14 +++++++++-----
>>> 1 file changed, 9 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
>>> index 62ace6698d25..a1742dc1f6fa 100644
>>> --- a/drivers/leds/leds-lm3532.c
>>> +++ b/drivers/leds/leds-lm3532.c
>>> @@ -601,11 +601,15 @@ static int lm3532_parse_node(struct lm3532_data *priv)
>>> goto child_out;
>>> }
>>>
>>> - ret = fwnode_property_read_u32(child, "led-max-microamp",
>>> - &led->full_scale_current);
>>> -
>>> - if (led->full_scale_current > LM3532_FS_CURR_MAX)
>>> - led->full_scale_current = LM3532_FS_CURR_MAX;
>>> + if (fwnode_property_present(child, "led-max-microamp")) {
>>> + if (fwnode_property_read_u32(child, "led-max-microamp",
>>> + &led->full_scale_current))
>>> + dev_err(&priv->client->dev,
>>> + "Failed getting led-max-microamp\n");
>>> + else
>>> + min(led->full_scale_current,
>>> + LM3532_FS_CURR_MAX);
> I didn't previously notice lack of assignment of min() return value.
>
> I've amended that and while at it improved a bit this construction to
> avoid some indentations and line breaks:
>
> diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
> index 62ace6698d25..0507c6575c08 100644
> --- a/drivers/leds/leds-lm3532.c
> +++ b/drivers/leds/leds-lm3532.c
> @@ -601,11 +601,14 @@ static int lm3532_parse_node(struct lm3532_data *priv)
> goto child_out;
> }
>
> - ret = fwnode_property_read_u32(child, "led-max-microamp",
> - &led->full_scale_current);
> -
> - if (led->full_scale_current > LM3532_FS_CURR_MAX)
> - led->full_scale_current = LM3532_FS_CURR_MAX;
> + if (fwnode_property_present(child, "led-max-microamp") &&
> + fwnode_property_read_u32(child, "led-max-microamp",
> + &led->full_scale_current))
> + dev_err(&priv->client->dev,
> + "Failed getting led-max-microamp\n");
> + else
> + led->full_scale_current = min(led->full_scale_current,
> + LM3532_FS_CURR_MAX);
>
> if (led->mode == LM3532_BL_MODE_ALS) {
> led->mode = LM3532_ALS_CTRL;
>
>
> Please let me know in case of any doubts.
This looks fine. It always passed for me because I never set the FSC
above max
Dan
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-09-12 19:47 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-11 18:27 [PATCH v2] leds: lm3532: Fix optional led-max-microamp prop error handling Dan Murphy
2019-09-12 18:32 ` Jacek Anaszewski
2019-09-12 19:12 ` Jacek Anaszewski
2019-09-12 19:47 ` Dan Murphy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).