* [PATCH] brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable
@ 2019-09-05 16:24 zhong jiang
2019-09-13 14:20 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: zhong jiang @ 2019-09-05 16:24 UTC (permalink / raw)
To: kvalo; +Cc: davem, zhongjiang, linux-wireless, netdev, linux-kernel
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
---
.../net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
index 07f61d6..3bf152d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
@@ -17748,7 +17748,7 @@ static void wlc_phy_txpwrctrl_pwr_setup_nphy(struct brcms_phy *pi)
num = 8 *
(16 * b0[tbl_id - 26] + b1[tbl_id - 26] * idx);
den = 32768 + a1[tbl_id - 26] * idx;
- pwr_est = max(((4 * num + den / 2) / den), -8);
+ pwr_est = max(DIV_ROUND_CLOSEST(4 * num, den), -8);
if (NREV_LT(pi->pubpi.phy_rev, 3)) {
if (idx <=
(uint) (31 - idle_tssi[tbl_id - 26] + 1))
@@ -26990,8 +26990,8 @@ static void wlc_phy_rxcal_phycleanup_nphy(struct brcms_phy *pi, u8 rx_core)
NPHY_RXCAL_TONEAMP, 0, cal_type, false);
wlc_phy_rx_iq_est_nphy(pi, est, num_samps, 32, 0);
- i_pwr = (est[rx_core].i_pwr + num_samps / 2) / num_samps;
- q_pwr = (est[rx_core].q_pwr + num_samps / 2) / num_samps;
+ i_pwr = DIV_ROUND_CLOSEST(est[rx_core].i_pwr, num_samps);
+ q_pwr = DIV_ROUND_CLOSEST(est[rx_core].q_pwr, num_samps);
curr_pwr = i_pwr + q_pwr;
switch (gainctrl_dirn) {
@@ -27673,10 +27673,10 @@ static int wlc_phy_cal_rxiq_nphy_rev3(struct brcms_phy *pi,
wlc_phy_rx_iq_est_nphy(pi, est,
num_samps, 32,
0);
- i_pwr = (est[rx_core].i_pwr +
- num_samps / 2) / num_samps;
- q_pwr = (est[rx_core].q_pwr +
- num_samps / 2) / num_samps;
+ i_pwr = DIV_ROUND_CLOSEST(est[rx_core].i_pwr,
+ num_samps);
+ q_pwr = DIV_ROUND_CLOSEST(est[rx_core].q_pwr,
+ num_samps);
tot_pwr[gain_pass] = i_pwr + q_pwr;
} else {
--
1.7.12.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable
2019-09-05 16:24 [PATCH] brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable zhong jiang
@ 2019-09-13 14:20 ` Kalle Valo
0 siblings, 0 replies; 2+ messages in thread
From: Kalle Valo @ 2019-09-13 14:20 UTC (permalink / raw)
To: zhong jiang; +Cc: davem, zhongjiang, linux-wireless, netdev, linux-kernel
zhong jiang <zhongjiang@huawei.com> wrote:
> The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
> but is perhaps more readable.
>
> Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Patch applied to wireless-drivers-next.git, thanks.
3dfb22003f98 brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable
--
https://patchwork.kernel.org/patch/11133663/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-09-13 14:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-05 16:24 [PATCH] brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable zhong jiang
2019-09-13 14:20 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).