* [PATCH v3] ARM: dts: imx6qdl-rex: add gpio expander pca9535
@ 2019-09-16 10:43 Gilles DOFFE
2019-10-07 11:24 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Gilles DOFFE @ 2019-09-16 10:43 UTC (permalink / raw)
To: devicetree
Cc: rennes, jerome.oufella, Rob Herring, Mark Rutland, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, linux-arm-kernel, linux-kernel
The pca9535 gpio expander is present on the Rex baseboard, but missing
from the dtsi.
The pca9535 is on i2c2 bus which is common to the three SOM
variants (Basic/Pro/Ultra), thus it is activated by default.
Add also the new gpio controller and the associated interrupt line
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
---
arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 97f1659144ea..8a748ca1b108 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -132,6 +132,19 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+ pca9535: gpio8@27 {
+ compatible = "nxp,pca9535";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9535>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
@@ -237,6 +250,12 @@
>;
};
+ pinctrl_pca9535: pca9535 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3] ARM: dts: imx6qdl-rex: add gpio expander pca9535
2019-09-16 10:43 [PATCH v3] ARM: dts: imx6qdl-rex: add gpio expander pca9535 Gilles DOFFE
@ 2019-10-07 11:24 ` Shawn Guo
2019-10-16 9:21 ` Gilles Doffe
0 siblings, 1 reply; 3+ messages in thread
From: Shawn Guo @ 2019-10-07 11:24 UTC (permalink / raw)
To: Gilles DOFFE
Cc: devicetree, rennes, jerome.oufella, Rob Herring, Mark Rutland,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, linux-arm-kernel, linux-kernel
On Mon, Sep 16, 2019 at 12:43:53PM +0200, Gilles DOFFE wrote:
> The pca9535 gpio expander is present on the Rex baseboard, but missing
> from the dtsi.
> The pca9535 is on i2c2 bus which is common to the three SOM
> variants (Basic/Pro/Ultra), thus it is activated by default.
>
> Add also the new gpio controller and the associated interrupt line
> MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
>
> Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
> ---
> arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> index 97f1659144ea..8a748ca1b108 100644
> --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> @@ -132,6 +132,19 @@
> pinctrl-0 = <&pinctrl_i2c2>;
> status = "okay";
>
> + pca9535: gpio8@27 {
gpio-expander might be a better node name?
Shawn
> + compatible = "nxp,pca9535";
> + reg = <0x27>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pca9535>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> eeprom@57 {
> compatible = "atmel,24c02";
> reg = <0x57>;
> @@ -237,6 +250,12 @@
> >;
> };
>
> + pinctrl_pca9535: pca9535 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059
> + >;
> + };
> +
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> --
> 2.20.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3] ARM: dts: imx6qdl-rex: add gpio expander pca9535
2019-10-07 11:24 ` Shawn Guo
@ 2019-10-16 9:21 ` Gilles Doffe
0 siblings, 0 replies; 3+ messages in thread
From: Gilles Doffe @ 2019-10-16 9:21 UTC (permalink / raw)
To: shawnguo
Cc: devicetree, rennes, Jérome Oufella, robh+dt, mark rutland,
s hauer, kernel, festevam, linux-imx, linux-arm-kernel,
linux-kernel
----- Le 7 Oct 19, à 13:24, shawnguo shawnguo@kernel.org a écrit :
> On Mon, Sep 16, 2019 at 12:43:53PM +0200, Gilles DOFFE wrote:
>> The pca9535 gpio expander is present on the Rex baseboard, but missing
>> from the dtsi.
>> The pca9535 is on i2c2 bus which is common to the three SOM
>> variants (Basic/Pro/Ultra), thus it is activated by default.
>>
>> Add also the new gpio controller and the associated interrupt line
>> MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
>>
>> Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
>> ---
>> arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi
>> b/arch/arm/boot/dts/imx6qdl-rex.dtsi
>> index 97f1659144ea..8a748ca1b108 100644
>> --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
>> +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
>> @@ -132,6 +132,19 @@
>> pinctrl-0 = <&pinctrl_i2c2>;
>> status = "okay";
>>
>> + pca9535: gpio8@27 {
>
> gpio-expander might be a better node name?
>
> Shawn
Indeed, v4 incoming. ;)
Thank you Shawn.
>
>> + compatible = "nxp,pca9535";
>> + reg = <0x27>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pca9535>;
>> + interrupt-parent = <&gpio6>;
>> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> eeprom@57 {
>> compatible = "atmel,24c02";
>> reg = <0x57>;
>> @@ -237,6 +250,12 @@
>> >;
>> };
>>
>> + pinctrl_pca9535: pca9535 {
>> + fsl,pins = <
>> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059
>> + >;
>> + };
>> +
>> pinctrl_uart1: uart1grp {
>> fsl,pins = <
>> MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
>> --
>> 2.20.1
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-10-16 9:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-16 10:43 [PATCH v3] ARM: dts: imx6qdl-rex: add gpio expander pca9535 Gilles DOFFE
2019-10-07 11:24 ` Shawn Guo
2019-10-16 9:21 ` Gilles Doffe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).