linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <mripard@kernel.org>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc: Chen-Yu Tsai <wens@csie.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	Icenowy Zheng <icenowy@aosc.io>,
	linux-sunxi <linux-sunxi@googlegroups.com>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	devicetree <devicetree@vger.kernel.org>
Subject: Re: [PATCH v11 1/7] drm/sun4i: dsi: Fix TCON DRQ set bits
Date: Mon, 7 Oct 2019 13:19:26 +0200	[thread overview]
Message-ID: <20191007111926.f6cw42nd5o4hyxst@gilmour> (raw)
In-Reply-To: <CAMty3ZA9tV-2nNa6qCBLUwoJpqEfQVZGk1E9-_wobfx5JDjvgw@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 6602 bytes --]

On Thu, Oct 03, 2019 at 08:46:31PM +0530, Jagan Teki wrote:
> On Thu, Oct 3, 2019 at 6:47 PM Maxime Ripard <mripard@kernel.org> wrote:
> >
> > On Thu, Oct 03, 2019 at 12:15:21PM +0530, Jagan Teki wrote:
> > > The LCD timing definitions between Linux DRM vs Allwinner are different,
> > > below diagram shows this clear differences.
> > >
> > >            Active                 Front           Sync           Back
> > >            Region                 Porch                          Porch
> > > <-----------------------><----------------><--------------><-------------->
> > >   //////////////////////|
> > >  ////////////////////// |
> > > //////////////////////  |..................                ................
> > >                                            ________________
> > > <----- [hv]display ----->
> > > <------------- [hv]sync_start ------------>
> > > <--------------------- [hv]sync_end ---------------------->
> > > <-------------------------------- [hv]total ------------------------------>
> > >
> > > <----- lcd_[xy] -------->               <- lcd_[hv]spw ->
> > >                                         <---------- lcd_[hv]bp --------->
> > > <-------------------------------- lcd_[hv]t ------------------------------>
> > >
> > > The DSI driver misinterpreted the hbp term from the BSP code to refer
> > > only to the backporch, when in fact it was backporch + sync. Thus the
> > > driver incorrectly used the horizontal front porch plus sync in its
> > > calculation of the DRQ set bit value, when it should not have included
> > > the sync timing.
> > >
> > > Including additional sync timings leads to flip_done timed out as:
> > >
> > > WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
> > > [CRTC:46:crtc-0] vblank wait timed out
> > > Modules linked in:
> > > CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00026-g01f0c75b902d-dirty #13
> > > Hardware name: Allwinner sun8i Family
> > > Workqueue: events deferred_probe_work_func
> > > [<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
> > > [<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
> > > [<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
> > > [<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
> > > [<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
> > > [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
> > > [<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
> > > [<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
> > > [<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
> > > [<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
> > > [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
> > > [<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
> > > [<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
> > > [<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
> > > [<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
> > > [<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
> > > [<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
> > > [<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
> > > [<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
> > > [<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
> > > [<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
> > > [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
> > > [<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
> > > [<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
> > > [<c043f060>] (sun4i_drv_bind) from [<c044b598>] (try_to_bring_up_master+0x164/0x1a0)
> > > [<c044b598>] (try_to_bring_up_master) from [<c044b668>] (__component_add+0x94/0x140)
> > > [<c044b668>] (__component_add) from [<c0445e1c>] (sun6i_dsi_probe+0x144/0x234)
> > > [<c0445e1c>] (sun6i_dsi_probe) from [<c0452ef4>] (platform_drv_probe+0x48/0x9c)
> > > [<c0452ef4>] (platform_drv_probe) from [<c04512cc>] (really_probe+0x1dc/0x2c8)
> > > [<c04512cc>] (really_probe) from [<c0451518>] (driver_probe_device+0x60/0x160)
> > > [<c0451518>] (driver_probe_device) from [<c044f7a4>] (bus_for_each_drv+0x74/0xb8)
> > > [<c044f7a4>] (bus_for_each_drv) from [<c045107c>] (__device_attach+0xd0/0x13c)
> > > [<c045107c>] (__device_attach) from [<c0450474>] (bus_probe_device+0x84/0x8c)
> > > [<c0450474>] (bus_probe_device) from [<c0450900>] (deferred_probe_work_func+0x64/0x90)
> > > [<c0450900>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
> > > [<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
> > > [<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
> > > [<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
> > > Exception stack(0xde539fb0 to 0xde539ff8)
> > > 9fa0:                                     00000000 00000000 00000000 00000000
> > > 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > > 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > > ---[ end trace b57eb1e5c64c6b8b ]---
> > > random: fast init done
> > > [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:46:crtc-0] flip_done timed out
> > > [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:48:DSI-1] flip_done timed out
> > > [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-0] flip_done timed out
> > >
> > > With the terms(as described in above diagram) fixed, the panel
> > > displays correctly without any timeouts.
> > >
> > > Tested-by: Merlijn Wajer <merlijn@wizzup.org>
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> >
> > Applied, thanks
>
> Thanks, would you apply the similar change in 3/7?

It doesn't apply anymore, please resend it

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2019-10-07 11:19 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-03  6:45 [PATCH v11 0/7] drm/sun4i: dsi: Fixes/updates (A33 reworked!) Jagan Teki
2019-10-03  6:45 ` [PATCH v11 1/7] drm/sun4i: dsi: Fix TCON DRQ set bits Jagan Teki
2019-10-03  6:51   ` Icenowy Zheng
2019-10-03  6:55     ` [linux-sunxi] " Jagan Teki
2019-10-03 13:17   ` Maxime Ripard
2019-10-03 15:16     ` Jagan Teki
2019-10-07 11:19       ` Maxime Ripard [this message]
2019-10-03  6:45 ` [PATCH v11 2/7] drm/sun4i: dsi: Update start value in video start delay Jagan Teki
2019-10-03  6:52   ` Icenowy Zheng
2019-10-03  6:45 ` [PATCH v11 3/7] drm/sun4i: dsi: Fix video start delay computation Jagan Teki
2019-10-03  6:45 ` [PATCH v11 4/7] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2019-10-03 11:47   ` Maxime Ripard
2019-10-03 13:04     ` Icenowy Zheng
2019-10-03 13:30       ` Maxime Ripard
2019-10-03  6:45 ` [PATCH v11 5/7] drm/sun4i: sun6i_mipi_dsi: Add VCC-DSI regulator support Jagan Teki
2019-10-03  6:55   ` Chen-Yu Tsai
2019-10-03  7:01     ` Jagan Teki
2019-10-03 11:46       ` Maxime Ripard
2019-10-03  6:45 ` [PATCH v11 6/7] drm/panel: Add Bananapi S070WV20-CT16 ICN6211 MIPI-DSI to RGB bridge Jagan Teki
2019-10-03  6:50   ` Jagan Teki
2019-10-03  6:45 ` [PATCH v11 7/7] ARM: dts: sun8i: bananapi-m2m: Enable Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-10-03  6:50   ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191007111926.f6cw42nd5o4hyxst@gilmour \
    --to=mripard@kernel.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=icenowy@aosc.io \
    --cc=jagan@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=michael@amarulasolutions.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).