From: Grygorii Strashko <grygorii.strashko@ti.com>
To: <netdev@vger.kernel.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>,
Jiri Pirko <jiri@resnulli.us>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>,
Murali Karicheri <m-karicheri2@ti.com>,
Ivan Vecera <ivecera@redhat.com>,
Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH v5 net-next 10/12] ARM: dts: dra7: add dt nodes for new cpsw switch dev driver
Date: Thu, 24 Oct 2019 13:09:12 +0300 [thread overview]
Message-ID: <20191024100914.16840-11-grygorii.strashko@ti.com> (raw)
In-Reply-To: <20191024100914.16840-1-grygorii.strashko@ti.com>
Add DT nodes for new cpsw switch dev driver.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 52 ++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 5cac2dd58241..2f3a19edc7af 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3079,6 +3079,58 @@
phys = <&phy_gmii_sel 2>;
};
};
+
+ mac_sw: switch@0 {
+ compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+ reg = <0x0 0x4000>;
+ ranges = <0 0 0x4000>;
+ clocks = <&gmac_main_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ syscon = <&scm_conf>;
+ status = "disabled";
+
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 1>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ label = "port2";
+ mac-address = [ 00 00 00 00 00 00 ];
+ phys = <&phy_gmii_sel 2>;
+ };
+ };
+
+ davinci_mdio_sw: mdio@1000 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ reg = <0x1000 0x100>;
+ };
+
+ cpts {
+ clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+ clock-names = "cpts";
+ };
+ };
};
};
};
--
2.17.1
next prev parent reply other threads:[~2019-10-24 10:10 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 10:09 [PATCH v5 net-next 00/12] net: ethernet: ti: introduce new cpsw switchdev based driver Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 01/12] net: ethernet: ti: cpsw: allow untagged traffic on host port Grygorii Strashko
2019-10-27 10:02 ` kbuild test robot
2019-10-27 10:02 ` [RFC PATCH] net: ethernet: ti: cpsw: cpsw_ale_set_vlan_untag() can be static kbuild test robot
2019-10-24 10:09 ` [PATCH v5 net-next 02/12] net: ethernet: ti: cpsw: ale: modify vlan/mdb api for switchdev Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 03/12] net: ethernet: ti: cpsw: resolve build deps of cpsw drivers Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 04/12] net: ethernet: ti: cpsw: move set of common functions in cpsw_priv Grygorii Strashko
2019-10-25 13:01 ` Andrew Lunn
2019-11-01 16:55 ` Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings Grygorii Strashko
2019-10-25 17:47 ` Florian Fainelli
2019-11-01 17:25 ` Grygorii Strashko
2019-11-01 17:36 ` Florian Fainelli
2019-11-01 20:40 ` Grygorii Strashko
2019-10-29 2:23 ` Andrew Lunn
2019-11-01 17:29 ` Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac Grygorii Strashko
2019-10-27 8:05 ` kbuild test robot
2019-10-29 12:24 ` Andrew Lunn
2019-11-01 20:16 ` Grygorii Strashko
2019-11-01 20:39 ` Andrew Lunn
2019-11-01 20:46 ` Grygorii Strashko
2019-11-01 20:59 ` Andrew Lunn
2019-10-29 12:32 ` Andrew Lunn
2019-11-01 20:34 ` Grygorii Strashko
2019-11-01 20:57 ` Andrew Lunn
2019-10-24 10:09 ` [PATCH v5 net-next 07/12] net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch Grygorii Strashko
2019-10-27 11:22 ` [RFC PATCH] net: ethernet: ti: cpsw_port_offload_fwd_mark_update() can be static kbuild test robot
2019-10-27 11:22 ` [PATCH v5 net-next 07/12] net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch kbuild test robot
2019-10-24 10:09 ` [PATCH v5 net-next 08/12] phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 09/12] Documentation: networking: add cpsw switchdev based driver documentation Grygorii Strashko
2019-10-24 10:09 ` Grygorii Strashko [this message]
2019-10-24 10:09 ` [PATCH v5 net-next 11/12] ARM: dts: am571x-idk: enable for new cpsw switch dev driver Grygorii Strashko
2019-10-24 10:09 ` [PATCH v5 net-next 12/12] arm: omap2plus_defconfig: enable new cpsw switchdev driver Grygorii Strashko
2019-10-24 16:05 ` [PATCH v5 net-next 00/12] net: ethernet: ti: introduce new cpsw switchdev based driver Tony Lindgren
2019-11-09 15:15 ` Grygorii Strashko
2019-11-11 17:08 ` Tony Lindgren
2019-11-12 9:48 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191024100914.16840-11-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=ivan.khoronzhuk@linaro.org \
--cc=ivecera@redhat.com \
--cc=jiri@resnulli.us \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=m-karicheri2@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).